Controls engineer jobs in Kenner, LA - 108 jobs

Your Opportunity a Lead Controls Engineer - TSO The Lead Controls Engineer will lead and support automation, controls, and technology initiatives across multiple manufacturing sites. Responsibilities include setting and maintaining engineering standards, engaging vendors to drive innovation, and providing corporate technical support. While collaborating closely with plant leadership, engineering, and operations teams, this role focuses on accelerating automation and technology through smaller, less complex projects that deliver impactful improvements. Location: You can pick to work at any of these locations: Orrville, OH, Arkadelphia, AR, Buffalo, NY, Columbus, GA, Decatur, AL, Emporia, KS, Lexington, KY, Longmont, CO, McCalla, AL, Memphis, TN, New Orleans, LA, Scottsville, KY, or Topeka, KS Work Arrangements: * Approximately 30% Travel to other sites * 100% on-site at the plants. AM Shift (Mon-Fri 8am-5pm) - Flexibility required. Willingness to flow to the work as needed In this Role You Will: * Projects: Support, lead, or manage smaller automation, controls, and technology projects at manufacturing sites, including possible installation oversight. Collaborate with engineering and operations leaders from feasibility through startup and CQV (commissioning/qualification/verification). * Standards and Best Practices: Apply, maintain, and develop engineering standards to ensure consistency and compliance with NFPA 70, NFPA 70E, NFPA 79, NEC, OSHA 1910. Communicate standards, guidance, and recommendations to engineering and controls personnel at the sites. * Vendor Engagement: Work closely with vendors to establish accurate quotations and resolving issues when needed. Leverage our internal resources to ensure terms and conditions are acceptable. Proactively engage with outside companies to explore new technologies. * Corporate Support: Provide C&IS support to operations, ensuring alignment with business objectives. Support MES and IS Operations when priorities align. * Automation Landscape: Understand current automation and technology state and drive targeted improvements, reapplications, and emerging technologies as part of the greater Operations Technology Team. * Expert in Key Technologies: Serve as the subject matter expert for key technologies, providing guidance and support to the engineering and operations teams. The Right Role for You We are bold, kind, strive to do the right thing, we play to win, and we believe in a strong community that thrives together. Our culture is rooted in our Basic Beliefs, and we believe in supporting every employee by meeting their physical, emotional, and financial needs. What We are Looking For: Minimum Requirements: * Bachelor's degree in engineering or 15+ years of equivalent plant experience * 5+ years in controls/automation * 3+ years in manufacturing * Strong knowledge of control hardware/software (Allen Bradley PLC and Rockwell FactoryTalk platforms) * Familiarity with NFPA and OSHA guidelines as they apply to electrical, controls, and automation Additional skills and experience that we think would make someone successful in this role: * Knowledge with plant systems software (Proficy, Project Management, eAM, etc.) * Mechanical/electrical experience in food manufacturing * Ability to collaborate across departments and sites * Remote management capability * Strong judgement and adaptability Work Environment: This job operates in a manufacturing environment. The noise level in the work environment and manufacturing sites can be high. Physical Demands: * Regularly required to talk and hear. * Frequently required to stand; walk; use hands and fingers to handle or feel; and reach with hands and arms. * Occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. * Able to lift objects up to 50 pounds frequently. * May push and pull heavy objects. * Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Learn More About Working at Smucker Helping our Employees Thrive Delivering on Our Purpose Our Continued Commitment to Ensuring a Workplace for All Follow us on LinkedIn #LI-TJ1 #INDSA

About Ampirical At Ampirical, we're shaping the future of the power grid with precision, innovation, and purpose. Just as the ampere is the foundation of electric current, Ampirical is a core force driving the energy sector forward. We focus on quality, forward-thinking solutions, and empowering our team to grow and thrive. We don't just build projects-we build careers. If you're looking for a place where your contributions matter and your professional development is supported every step of the way, we'd love to meet you. Watch this video to get a glimpse into our culture. Why Ampirical? Salary Range: $80,000- Commensurate (dependent on experience, education, and qualifications) Profit-Sharing Bonus: Semi-annual, performance-based (10% to 20% of salary) Day-One Benefits: Medical, Dental, Vision 401(k) with 4% match and immediate vesting ️ PTO: Starting at 80 hours of vacation & 40 hours of sick time per year + 10 paid holidays ️ Flexible Work Schedule: Every other Friday off Career Development: Advancement opportunities, tuition reimbursement Perks: Gym membership stipend, wellness program, fertility benefits, pet insurance, and more Job Summary: The Relay Protection and Controls Engineer is responsible for the design and procurement of protective relaying equipment for substations, switchyards, and transmission lines. They are accountable for adherence to and revisions of design/construction scope processes. The Senior Engineer works closely with the client to ensure quality design to meet client's standards and provides field support to the client during construction activities as required. Who You Are: * Bachelor's Degree in Electrical Engineering from an ABET accredited university * 4+ years of experience engineering/designing electrical systems within the Utilities or Energy industry * Experience with ETAP, WinIGS, IEEE 88/998 * Experience using Autodesk AutoCAD, Autodesk Inventor, Bentley MicroStation and/or Bentley Substation software to develop 2D drawings or 3D models are a plus. * PE Certification * Knowledge and understanding of one or more of the following skillsets: SCADA, automation, relay settings, RTU configuration, and Protection & Controls engineering terms and concepts are a plus. * Experience working with the electric utility industry or petro-chemical industry. * BSEE Degree with 6+ years of experience. Duties and Responsibilities: * Identify proper protection and control schemes for transmission and distribution substations. * Select proper protection devices for equipment within a substation. * Prepare scopes of work and estimates for evaluating and designing substations. * Identify proper equipment sizing and order material. * Ensure the maintenance and adherence of customer standards as it pertains to relay protection. * Create drawing packages for substation relay protection that include wiring diagrams, schematics, protection panels, one-line, and three-line diagrams. * Interface with clients and vendors. * Perform load calculations for load panels, battery systems, voltage drop, and other various substation components. * Perform substation field support and field pre-inspection for "turn-key" substation projects consisting of protection panels, circuit switchers, circuit breakers, transformers, control house, and supporting equipment. * Mentor new engineers. Ampirical is an Equal Opportunity Employer, meaning we do not discriminate based on the following characteristics in our hiring and employment practices: Age, sex, color, race, creed, national origin, religion or religious attire, marital status, pregnancy (child birth or related medical conditions), citizenship status or amnesty, ancestry, sexual orientation, gender, gender identity, gender expression, transgender status, physical or mental disability, military or veteran status, genetic information, sickle-cell trait, status as a tobacco user or non-user, or any other classification protected by federal, state, or local law. #LI-DH1

About Us We design, manufacture, and service advanced electrical switchboards, control systems, and automation solutions for the marine and industrial markets. Our projects range from custom switchboards to full vessel power management and automation. We are growing and looking for a Controls Engineer with strong Siemens PLC experience to join our team. Role Overview As a Controls Engineer, you will be responsible for programming, configuring, and commissioning Siemens PLCs and related control systems across a variety of marine and industrial projects. You'll work closely with our engineering and field service teams to ensure systems are designed, tested, and deployed reliably. Key Responsibilities • Develop, program, and troubleshoot Siemens PLC applications (TIA Portal, Step 7, WinCC, etc.). • Design and implement control strategies for switchgear, MCCs, VFD packages, and automation systems. • Support FAT (Factory Acceptance Testing) and on-site commissioning of systems. • Collaborate with design engineers to integrate PLC logic with electrical schematics and HMI/SCADA systems. • Provide technical support during installation, startup, and service calls. • Maintain accurate documentation of code, logic, and project revisions. Qualifications • Bachelor's degree in Electrical Engineering, Controls Engineering, or equivalent experience. • 2+ years hands-on experience with Siemens PLCs (TIA Portal, Step 7). • Experience with HMI/SCADA platforms (WinCC, Ignition, or similar). • Strong troubleshooting skills for industrial/marine control systems. • Ability to read and interpret electrical schematics. • Willingness to travel for commissioning and field work as needed. Preferred Skills • Marine industry or heavy industrial controls experience. • Familiarity with Allen-Bradley, ABB, or Schneider PLCs/VFDs. • Knowledge of switchgear, power management systems, and generator controls. What We Offer • Competitive salary based on experience. • Health, dental, vision, and retirement benefits. • Opportunities for professional development and certification. • The chance to work on high-impact marine and industrial projects.

Job Description can be located at our Bayou La Batre, AL shipyard or our New Orleans Office (travel required between both) Join the Birdon team and be a part of growth! Our Controls Engineer will be an integral piece of our work on a daily basis. Some of your daily functions will include: Support the C5I GM as required in the delivery of cross-functional control systems (Systems Engineering, Electrical Engineering, Instrumentation and Control Systems, Cyber System Architectures) Provide engineering services for a broad spectrum of controls capabilities for marine HM&E systems Assist with design and integration efforts of control systems & technologies across maritime platforms Participate in the coordination of technical and assessment activities internal and external to the Waterways Commerce Cutter (WCC) Program Systems Integration Laboratory (SIL), including program, engineering, and IS&T disciplines, SMEs, suppliers, and Birdon customers and other US Government agencies/regulations as required Develop specifications and design artifacts to achieve engineering and cybersecurity (CS) deliverables such as drawings, specifications, network architectures, system interfaces, and network system configurations Participate in development and implementation of improvement and recovery plans and ensure they are issued, tracked, and reported on as required for supply base management and improvement Create design presentations and brief customers as needed on behalf of government sponsors. Draft technical reports such as site surveys, test procedures, test reports, trade studies, and white papers. Write and support executive level papers/briefs for submission. If you have a post High School education in Controls and/or Systems Engineering and 5-10 years' experience in control system design and integration, we want to talk to you! Birdon is committed to the HEALTH and SAFETY of our workforce and to the ENVIRONMENT, we expect this same commitment from all employees. Birdon America Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Know Your Rights The Company invites any applicant and/or employee to review the Company's written Affirmative Action Plan. This plan is available for inspection upon request by emailing ************ . If you are an individual with a disability and would like to request a reasonable accommodation as part of the employment selection process, please contact ************ for further assistance.

Benefits: 401(k) Health insurance Paid time off Vision insurance Role Objectives: Responsible for repair and maintenance of electrical components and equipment associated with the marine propulsion service industry including the following brands. (ZF, Schottel, Rolls-Royce, Aquamaster, Steerprop, Ulstien, Brunvoll…) Key Responsibilities: · Leading services to perform quality repairs, commissioning, and/or new construction installation on marine electronic components. · Perform basic trouble shooting on the marine propulsion equipment listed in the objectives. · Making the necessary arrangements and travel to job site for repairs needed. · Performing Reporting when necessary · Company credit card issued for job expenses ONLY. (Auto fuel, rental car, airfare, lodging, etc.) · Participating in afterhours callouts or emergency callouts. · Able to use company truck for business use. · Advanced electrical related experience. · Perform Sea-Trials when expected and provide exceptional customer support. · Hands on support for installation, testing, and validating the operation of motor starters, electric, and PTO hydraulic and lubrication pumps, and ABB. · Install all wire and cable as necessary by OEM recommendations. · Using industry-specific tools to analyze and test marine electronics. · Picking up parts and supplies from vendors when necessary. · Assisting in hurricane procedures when required · Maintain a clean and organized workplace. Knowledge and Skill Requirements: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to calculate figures and amounts such as distances, measurements, percentages, volume. Ability to apply common knowledge to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Valid TWIC and Driver's License (Passport a plus) Education/Experience: High school diploma or equivalent; OR 10 years related experience or training. OEM training or experience Able to complete international ZF product training as necessary. Physical Requirements: While performing the duties of this job, the Controls Engineer is regularly required to use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear, swim. It is frequently required to stand, walk, sit, climb, or balance. The Controls Engineer must regularly lift and/or move up to 25 pounds, frequently lift and/or move up to 50 pounds, and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, depth perception and ability to adjust focus. These tasks are performed day or night and in all types of weather conditions. Work on/near deep water and electricity. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Pond is seeking an experienced Transmission Line Engineer (PE) to join our growing Energy team. The ideal candidate will have 5+ years of relevant experience and a passion for growth and collaboration. In this role, you will support our Power Services program, delivering projects for clients across the United States and expanding your expertise in transmission and substation design. We are looking for a licensed Professional Engineer who is a self-starter and can work independently within a multidisciplinary environment. Job Responsibilities Apply knowledge of transmission line design materials to generate framing drawings, load and dimension drawings, and bills of materials Design transmission line projects using industry-recognized software such as AutoCAD / Civil 3D, FAD Tools, and PLS-CADD Create drawings and specifications for transmission line construction Perform electrical calculations for transmission line system design and studies (Insulation Coordination, OPGW Analysis, Grounding, Line Loss, etc.) Coordinate with internal project managers and other disciplines to ensure project success Prepare engineering deliverables, including contract documents and technical studies Ensure adherence to industry standards, codes, and best practices Manage project budgets, schedules, and quality requirements Assist with equipment specifications, bid evaluations, and procurement Manage multiple projects simultaneously Travel to client sites and industry conferences as needed Qualifications Bachelor of Science (BS) in Civil, Electrical, or Mechanical Engineering (or equivalent) 5+ years of experience in transmission line design Active Professional Engineer (PE) license required (with ability to obtain reciprocity in other states as needed) Familiarity with relevant industry codes, standards, and design software (PLS-CADD, AutoCAD, Civil 3D, etc.) Strong communication and organizational skills with the ability to work independently and as part of a team

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more - all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. NEUTRON Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab's proven execution history with the Electron program. AUTOMATION & CONTROLS ENGINEER Based out of Rocket Lab's Stennis Test Complex in Stennis Space Center, MS, the Automation & Controls Engineer is responsible for commissioning, testing, updating, and troubleshooting ground support software systems as well as engine and test site software interfaces. The role directly supports Neutron engine test campaigns in close collaboration with operators, the engine development team, software development teams and the ground systems instrumentation & control teams. This role may support other activities on occasion such as Neutron test and launch campaigns at Rocket Lab's Launch Complex in Wallops Island, VA. Note: This position can be hired as a Level II, Senior Engineer I or Senior Engineer II level. WHAT YOU'LL GET TO DO: Support propulsion engineers and test operators to troubleshoot software issues across all systems at the test site, including but not limited to cloud-based data processing services, site and engine data interfaces, and operator consoles. Collaborate with IT, Ground Systems Instrumentation & Control, and terrestrial and vehicle software teams to deploy and commission test site software systems. Support the certification of test pad systems by producing documentation, operator manuals, maintenance procedures, test procedures, and work instructions. Develop and execute test plans to validate the performance of ground software systems and engine interfaces. Perform post-test data analysis and reporting. Be point of contact for any software-related requests on site, implementing changes yourself or escalating to development teams as required. Support test operators remotely or in person during installation, commissioning, testing, and troubleshooting activities. Developing and troubleshooting PLC programs for automating test operations YOU'LL BRING THESE QUALIFICATIONS AS A LEVEL II ENGINEER: Bachelor's degree in computer science, electrical engineering, computer engineering, or equivalent qualification 2+ years of demonstrated experience developing software Hands-on experience with data processing systems Proficiency in Git and working with issue trackers YOU'LL BRING THESE QUALIFICATIONS AS A SENIOR ENGINEER I: Bachelor's degree in computer science, electrical engineering, computer engineering, or equivalent qualification 5+ years of demonstrated experience developing software Hands-on experience with data processing systems Proficiency in Git and working with issue trackers YOU'LL BRING THESE QUALIFICATIONS AS A SENIOR ENGINEER II: Bachelor's degree in computer science, electrical engineering, computer engineering, or equivalent qualification 8+ years of demonstrated experience developing software Hands-on experience with data processing systems Proficiency in Git and working with issue trackers THESE QUALIFICATIONS WOULD BE NICE TO HAVE: Experience with programming languages such as C++, Python, Go, C#, XAML Experience with object-oriented programming Requirements-driven software design Experience with Beckhoff TwinCAT and IEC 61131-3 PLC languages Experience with Kubernetes & Docker Proficiency working with the Linux command line and TeamCity ADDITIONAL REQUIREMENTS: Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus. Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing. Must be physically able to commute to buildings Occasional exposure to dust, fumes and moderate levels of noise. Ability to work extended hours or weekends as needed for mission critical deadlines Position requires approximately 10% domestic travel to support test and launch campaigns WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at ***********************.This dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

**About Us** At ENFRA, we blend a rich history with a forward-looking vision. With over 100 years of experience, we are a pillar of stability in the energy infrastructure industry and a leader in innovative energy solutions. Our commitment to leveraging emerging technologies ensures that we remain at the forefront of the Energy-as-a-Service sector. We believe in growth-not just for our business, but for our people. Our team members have the opportunity to advance their careers in a supportive environment that values continuous learning and development. We embrace innovation and encourage creative problem solving to tackle the energy infrastructure and energy challenges of tomorrow. Inclusion is at the heart of our culture. We strive to create a workplace where every voice is heard and valued, fostering a collaborative environment where diverse perspectives drive our success. Join us to be part of a legacy of excellence and a future of groundbreaking advancements. At ENFRA, stability, innovation, and growth are more than just values-they are the pillars of our continued success. **Overview** The Electrical Engineer, PE I is responsible for overseeing the creation of technical design solutions and/or studies. The purpose of a Senior Professional Electrical Engineer is to provide technical authority and direction as the Engineer of Record (EOR) for the development of electrical engineering designs, studies and solutions and part of an integrated project team. **Responsibilities** + Analyzes, develops and evaluates systems. + Improves and maintains current systems or creates brand new projects. + Designs and drafts blueprints, visits systems in the field and manages projects. + Applies engineering techniques and analyses within the scope of the assignment. + Performs work under minimal supervision. + Handles complex issues and problems, and refers only the most complex issues to higher-level staff. + Provides leadership, coaching, and/or mentoring to a subordinate group. May act as a lead or first-level supervisor. **Qualifications** + Bachelor's degree in Engineering and Professional Engineer (PE) License + 4-6 years of experience + Strong proficiency in REVIT + Strong technical skills - familiarity with the National Electrical Code (NEC) + Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint) + Excellent verbal and written communications skills + Possesses comprehensive knowledge of the subject matter + Critical thinking skills + Detail-oriented and willing to tackle various ongoing projects in a fast-paced environment + Excellent multitasking skills, with the ability to perform duties outside of the scope of work when necessary + Preferred experience with the design of Healthcare projects. + Preferred experience with the design of Higher Education projects. + Preferred experience with the design of Central Energy Plant (CEP) electrical infrastructure projects. + Preferred experience in the design of medium voltage protection and power distribution systems. + Preferred experience in the design of paralleled generator systems at medium voltage and below. + Prolonged periods of sitting at a desk and working on a computer. + Climbing stairs. + Remaining in a stationary position, often kneeling, standing or sitting for prolonged periods. + Repeating motions that may include the wrists, hands and/or fingers. + Quiet environment. + Light work that includes adjusting and/or moving objects up to 20 pounds. + 5-10% of time will be spent traveling to job site(s)/office location. **Pay Range** USD $103,175.00 - USD $132,810.00 /Yr. ENFRA is proud to be an Equal Opportunity Employer of Minorities, Women, Protected Veterans, and Individuals with Disabilities, and participates in the e-Verify program. All qualified applicants will receive consideration for employment without regard to race, creed, color, religion, sex, age, sexual orientation, gender identity, national origin, veteran status, disability, or any other classification protected by law. Submit a Referral (******************************************************************************************************************************* **Job Locations** _US-LA-Metairie_ **ID** _2025-7495_ **Category** _Engineering/Designers_ **Position Type** _Full-Time_ **Remote** _No_

Full-time Description The Electrical Power System Application Engineer delivers best-in-class technical expertise and customer service to the electrical infrastructure industry by listening carefully, applying sound engineering judgments, and responding effectively. The Application Engineering Department provides technical leadership across sales, estimating, and project execution. This role supports the development and enforcement of engineering standards, delivers project-level technical guidance, and contributes to research and development initiatives. The primary objective is to apply deep technical expertise to inform estimating, design, and manufacturing decisions ensuring accurate execution, efficient production, and an exceptional customer experience. Consistent and accurate representation of Mission Critical Group's brand, mission, values, and strategic objectives is essential to success in this role. Schedule: Monday to Friday - 8am to 5pm Location: This position is 100% onsite. Our preferred location is Belle Chasse, LA. We will also consider candidates located in: Bay St. Louis, MS West Chester, PA Stone Mountain, GA Brookston, IN Responsibilities: Technical Leadership & Project Support Serve as a technical advisor to internal and external stakeholders to ensure accurate specifications and error-free designs. Maintain current industry standards files on server, ANSI, IEEE, ABS, USCG, DNV, NEMA, IEC, etc. Collaborate with account managers and internal stakeholders to define the technical scope offered within the current type of tested product offering. Participate as a subject matter expert in RFQ reviews and preliminary and secondary specification reviews to identify technical risks, material constraints, and potential schedule impacts. Develop, document, and present detailed value-engineered solutions based on project drawings, technical specifications, and customer requirements, balancing performance, cost, schedule, and manufacturability. Review project quotation packages to ensure technical accuracy, clarity, and timely delivery to customers. Develop and review preliminary datasheets during the RFQ stage; finalize project datasheets prior to design kickoff. Review sales quotation letters to ensure technical accuracy including ratings and tested product offering. Provide first line of communication with United Laboratories concerning current and future product offerings and testing requirements. Provide local support for any R&D products that require type testing of new equipment. Participate in the design review process for submittal drawings to customers to ensure industry and design standards are met, and any UL label can be applied. Complete any special projects assigned by supervisor Cross-Functional Collaboration Act as a technical liaison between customers and internal teams-including engineering, estimating, and operations-to ensure timely, accurate, and consistent information flow. Engage operations and manufacturing teams to evaluate design impacts on manufacturability, serviceability, and field support. Engineering Standards & Continuous Improvement Collaborate with designers and senior engineers to develop, maintain, and continuously improve standardized engineering processes, tools, and guidelines under the direction of the Director. Performance Measures Performance objectives and metrics are aligned with the company's Strategic Plan and Business Management System. All employees are jointly accountable for achieving organizational objectives and are expected to operate in accordance with established policies, procedures, and quality systems. Qualifications: Education & Certifications High School Diploma or GED, Required. Must reside in or near Belle Chasse, LA, Bay St. Louis, MS, Westchester, PA, Stone Mountain, GA or Brookston, IN. Required. Bachelor's degree in Engineering, Business Administration, or a related field, Preferred. Professional Engineer (PE) License, Preferred. Experience 5+ years of electrical power systems application experience (up to 38 kV) in Marine, Heavy Industrial, or Oil & Gas environments, including: Switchgear Motor Control Centers (MCCs) Generators and Motors Power Factor Correction Circuit Breakers, Fuses, and Reclosers Transformers Protective Relays and Protection Schemes UPS and Battery Systems Variable Frequency Drives (VFDs) Automation systems (SCADA, DCS, HMI, IEDs) Working knowledge of applicable standards, including NEC, NFPA 70E, NEMA, IEEE, IEC, UL/CSA, ABS, ANSI C37.1and ANSI C37.2 Knowledge, Skills & Abilities: Technical Expertise: Strong practical knowledge of electrical power systems engineering, design tools, and production processes. Analytical Skills: Ability to independently identify, analyze, and resolve technical issues while adhering to established procedures and ethical standards. Manufacturing Insight: Understanding of materials, production methods, quality control, and cost considerations. Computer Skills: Proficiency with Microsoft Office; familiarity with project management, CRM (Salesforce), and ERP/accounting systems Communication Skills: Advanced verbal and written communication skills, including the ability to interpret technical and regulatory documents and present complex information to customers and senior leadership. Mathematical Skills: Advanced mathematical aptitude, including statistical and algebraic problem-solving.

Job Description WHAT WE NEED: Electrical Engineer (On-Site) We are seeking a skilled Electrical Engineer to join our team. This position will be at our client site in Donaldsonville, LA. This role will provide technical support for electrical systems, maintenance activities, and capital projects to ensure safe, reliable, and efficient operations. The ideal candidate will have strong problem-solving skills, experience in industrial environments, and the ability to collaborate across multiple disciplines. Responsibilities: Provide technical support for electrical systems during maintenance, outages, and project execution. Troubleshoot and resolve electrical issues to maintain safe and reliable operations. Assist with planning and implementing electrical strategies and improvements. Review and maintain electrical drawings, procedures, and documentation. Ensure compliance with applicable codes and standards (NEC, NFPA 70E, OSHA). Support capital projects from design through commissioning, including technical reviews and field support. Collaborate with vendors and internal teams to implement innovative electrical solutions. WHO WE NEED: Bachelor's degree in electrical engineering from an accredited institution. 2-5 years of experience as an Electrical Engineer in an industrial or petrochemical setting. Strong knowledge of electrical systems, maintenance practices, and project execution. Familiarity with industry standards and regulations (NEC, NFPA 70E, OSHA). Excellent communication and problem-solving skills. Proficiency with electrical modeling tools (e.g., ETAP) is a plus. WHO WE ARE: Founded in 1987, Sigma is a professional multi-discipline engineering and design company that serves the petrochemical, fertilizer, and refining industries. Privately owned and operated by Engineers, Sigma's culture empowers employees and clients to choose relationships and projects that fit our values and ultimately act as an extension of our clients. Our technical resources provide unmatched quality in multi-discipline engineering and design, in-plant services, supplier quality inspections, field services, automation, procurement and expediting, construction management, and leadership training. If you would like to see more of what Sigma is about visit our website at **************** " We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law ." Ability to pass pre-employment drug/alcohol screening. Ability to pass background screening. Must be authorized to work in the United States Job Posted by ApplicantPro

Who we are: Globalstar pioneered personal safety by introducing its SPOT Satellite GPS Messenger in 2007. Today, leveraging its low-earth orbit (LEO) satellite constellation, Globalstar reliably connects and protects assets, transmits key operational data, and saves lives - from any location - for consumers, industrial companies and government agencies in over 120 countries. What you will be doing at Globalstar Globalstar is seeking a Spacecraft Operations Control Systems Engineer to join our satellite team. You will be responsible for mission‑critical software supporting 24×7 satellite operations. In this role, you will be a key contributor throughout the full lifecycle of the ground control system, helping ensure system reliability, operational efficiency, and a seamless user experience for satellite operators. You will work closely with satellite engineering teams, operations analysts, and third‑party software vendors to enhance system performance, troubleshoot complex issues, and support continuous improvement initiatives. This position requires a strong technical foundation, excellent problem‑solving skills, and the ability to thrive in a high‑availability, mission‑critical environment. Duties/Responsibilities: Support, maintain, and enhance Telemetry, Tracking, and Control (TT&C) core applications and peripheral systems used in satellite operations. Collaborate with subject matter experts to perform root‑cause analysis on reported issues, ensuring rapid resolution and adherence to high‑availability requirements for mission‑critical systems. Assist in developing, refining, and executing efficient software release and deployment processes to minimize operational disruptions. Participate in system architecture planning, working with subject matter experts to optimize capabilities while ensuring alignment with project scope, timelines, and budget constraints. Create, update, and manage system documentation, technical references, and training materials to support operational readiness and knowledge transfer. Contribute to continuous improvement initiatives by identifying functional gaps, evaluating potential solutions, and preparing proposals or recommendations for leadership review. Provide on‑call support as required to ensure system reliability and mission continuity. What you will bring to Globalstar Bachelor's or higher in Information Technology, Information Systems, Computer Engineering, or a related technical field. Equivalent experience may be substituted for a bachelor's degree. 10+ years of prior experience in satellite operations or other mission‑critical environments required. 5+ years of experience with both Linux and Windows operating systems, including hands‑on experience in operational or production environments. Familiarity with mission‑critical, high‑availability systems and the principles required to maintain system reliability. Experience with time series databases, visualization tools such as Grafana, multi region cloud applications, and infrastructure as code tools preferred - troubleshooting. It's a bonus if you have: Master's or higher in Information Technology, Information Systems, Computer Engineering, or a related technical field. Equivalent experience may be substituted for a master's degree. Experience writing Python applications Experience working with operational hardware such as steerable antennas, motor controllers, RF equipment, and other satellite ground system components. Highly desired Skills and Competencies: Excellent verbal and written communication skills, with the ability to clearly and concisely collaborate across departments and all levels of management. Strong customer‑service orientation with the ability to support both technical and non‑technical stakeholders. Demonstrated ability to act with integrity, professionalism, and maintain confidentiality. Exceptional organizational skills and strong attention to detail. Ability to manage multiple priorities and meet deadlines in a fast‑paced, mission‑critical environment. Strong time‑management skills, including the ability to effectively prioritize tasks as operational needs evolve. Ability to adapt quickly to changing project priorities and operational requirements. Strong analytical thinking and logical reasoning abilities. Expertise in troubleshooting methodologies, diagnostic tools, and structured problem‑solving frameworks. Highly skilled in fault isolation techniques for complex systems. Strong self‑motivation and willingness to tackle challenging or ambiguous technical problems. Physical Requirements: Prolonged periods of sitting at a desk and working on a computer Willingness and ability to travel as needed Willingness and ability to work after regularly scheduled hours as needed Ability to sit at a desk for prolonged periods working on a computer (4 to 8 hours) Ability to operate the equipment used for the job Ability to lift 15 pounds at times Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this job Marginal Functions: A review of this may have omitted some of the marginal functions of the position that are incidental to the performance of the job duties and responsibilities. This job description, in no way, states or implies that these are the only duties and/or responsibilities to be performed by the employee in this position. The employee in this position will be required to follow any other job-related instructions and to perform any other job-related duties requested by his/her supervisor. What Globalstar offers: Work/Life Balance: Paid Time Off, Paid Holidays Financial Benefits: 401(k) Plan with Company Match, Employee Stock Purchase Program, Voluntary and Company Paid Group Life Insurance, Short- and Long-Term Disability Insurance, Medical FSA, Dependent Care, Competitive Salaries Health & Wellness: Health Insurance, Dental Insurance, Vision Insurance, Employee Assistance Program, Comprehensive and Interactive Wellness Program

Remarkable people, trusted by clients to design and advance the world. Wood is currently inviting expressions of interest for a Project Controller for our expanding offshore brownfield engineering business based in Metairie, LA. #LI-Onsite The Role The Project Controller will work with the cost, planning, scheduling, and risk assessment support for assignments, project teams, and clients on projects ranging from small to moderate size and complexity. This role ensures the implementation and operation of all required project controls systems, tools, and interfaces for successful project management and reporting. Our Clients and Projects Designing the future. Transforming the world. Wood's Operations business delivers solutions to an ever-broadening range of clients across the energy and materials industries globally. We deliver operations, maintenance, modifications, brownfield engineering, asset optimization and management, supporting our clients through the asset lifecycle. We are focused on developing strategic relationships with our clients, providing solutions that deliver efficiency, integrity and reliability. What we can offer Meaningful and interesting projects delivered to leaders of industry across renewables and emerging energy sectors Flexible working arrangements that balance client, team and individual needs Commitment to Diversity and Inclusion across our business with employee networks committed to giving all employees a voice Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market. Flexible benefits package that can be adapted to suit your lifestyle Commitment to continued professional development through development plans tailored to individual needs and interests Global connections with leading industry experts around the world who are shaping the standards of our profession Knowledge, Skills, and Experience What makes you remarkable? At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge, or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world's most critical challenges. Expected: Typically requires a minimum of 3-5 years of relevant industry experience, with at least 2 years in project control positions Knowledge and appreciation of the core principles of Contracts Management, Commercial Management, and Project Management Working knowledge and application of earned value and other monitoring techniques Excellent client service focus Exceptional organizational skills and ability to multi-task Proficiency with the Microsoft Office software suite of applications Prior field experience working on-site viewed favorably Key responsibilities: Act as the focal point with the client and any contractor Project Controllers to ensure costs and progress are reported accurately Monitor overall project progress status, achievement, and non-achievement of major milestones; analyze performance in relation to the plan Identify, monitor, and report against the project critical path, providing early warning to the Project Manager of any potential slippages Effectively manage the communications interfaces essential for delivering cost, planning, scheduling, and risk deliverables and services Utilize project management systems and tools to update and manage project budgets, commitments, expenditures, and forecasts Report project status and KPIs to management Review and produce weekly and monthly project cost and planning status reports Implement the project Work Breakdown Structure (WBS) for specific scopes of work Implement the cost and planning control structures in alignment with the project WBS Timely control and forecasting of budgets; ensure that the impact of all change requests is properly assessed and included in the budget and schedules Support Project Accountants and Billing Specialists; ensure timely and accurate invoicing Develop and maintain monthly Contingency, Bookings, Accruals, and cash flow position to provide visibility to Management and Finance Team Monitor, record, and evaluate progress for subcontractors; support with quantifying subcontractor scopes of work Create fully resourced, logic-linked Gantt Charts within preferred planning software to the agreed project and program requirements Monitor current and forecast future resource needs for the project and program through analysis of workload at the project level Identify slippages, significant float erosion; lead the recovery process Develop and issue project change orders/variations in accordance with contract/assignment change notifications Promote the project change management system; ensure adherence to process Attend client progress meetings as required Ensure risk management and monitoring at project level in line with local standards and processes Ensure accuracy and completeness of all cost, planning, and risk deliverables prior to issue to internal or external customers Ensure all project-specific tools and systems are set up and functioning adequately Implement project-specific tax strategies recommended by Tax Advisors; provide leadership on resolving project-related tax issues as they arise

Cushing Terrell is seeking a Medium Voltage Distribution Electrical Engineer to join our growing overhead distribution team. This hands-on role offers the opportunity to design, deliver, and shape the firm's distribution capabilities while working on substations, overhead, and underground distribution systems. In this role you will: Design and develop electrical power substations and/or underground and overhead distribution lines Produce and review one-line diagrams, relaying diagrams, control schematics, grounding plans, site plans, and construction specifications Ensure compliance with the National Electrical Safety Code (NESC) and National Electrical Code (NEC) Collaborate with multidisciplinary teams to produce high-quality, coordinated construction documents Contribute to the growth of the overhead distribution practice, gaining opportunities for skill development, mentorship, and long-term career advancement This role provides hands-on technical work, meaningful collaboration, and the chance to grow with a team expanding our distribution capabilities Position Salary Range* The expected salary range for this position is starting at $80,000 - $96,000 annually DOE. Required Qualifications** Bachelor's degree or higher education in Electrical Engineering 5 + years of job-related experience including substation and/or underground and overhead distribution line design Remote may be considered with 7+ years of experience. Working knowledge of the National Electrical Safety Code and the National Electrical Code Licensed Professional Engineer (or on path to obtain) in the state of the hiring Cushing Terrell office Intermediate knowledge of Auto CAD, Bluebeam, Outlook, Microsoft Office Ability to design a substation system or power distribution system for small to medium size projects with minimal guidance from professional engineers from start to finish Excellent working knowledge of substation and distribution systems components such as circuit breakers, transformers, switches, ground grid systems, support structures, foundations, lightning protection systems, electrical one-line diagrams, three-line diagrams, conduit & cable schedules, relay panels, and control buildings Ability to collaborate and efficiently work on a team to produce high quality construction documents for projects High level of Quality control and ability to correct design issues Analytical problem-solving skills Necessary mathematical skills Preferred Qualifications** Knowledge of overhead distribution line design a plus Substation Design BIM software and Distribution software experience a plus Did you know that some people hold back on applying to jobs if they don't meet 100% of the listed requirements? We don't want you to hold back! If you check most of the qualifications above and believe you could successfully do the work, we encourage you to apply! Position Responsibilities*** Consult with the client to determine functional requirements of new or renovated systems and/or projects and prepare information regarding design, specifications, estimated costs, and construction time Collaborate with other disciplines to produce preliminary concepts and drawings such as developing Produce plans, sections, and details under the direction of the Project Engineer or as the Project Engineer Demonstrate an understanding of the National Electrical Safety Code sections for Grounding, Electrical Supply Stations and Overhead and Underground Distribution Lines in the production of engineering calculations, design drawings, and specifications Apply the National Electrical Code in production, including wire sizing, conduit types and sizing, grounding, clearance requirements, etc. in the production of engineering calculations, design drawings, and specifications. Produce one-line diagrams, metering and relaying diagrams, control schematics, grounding plans, physical plans and elevations, and construction specifications Working at Cushing Terrell Cushing Terrell is a multidisciplinary design firm with 17 offices and more than 500 team members who bring together their expertise to deliver holistic built environments. Leveraging our influence as designers, we work to create sustainable systems and spaces that help people live their best lives. Why Cushing Terrell At Cushing Terrell, we empower creative designers to discover imaginative, responsible, first-of-their kind environments. But more than that, we support a strong, cohesive team - from our design professionals to our business operations staff. Together, we champion diversity, equity, inclusion, and belonging - placing people at the center of our practice, thus our tagline, “design meets you.” Together, we find joy in uncovering imaginative solutions for the people who work here, the people we work for, and the planet as a whole. We offer a competitive benefits package, work opportunities in a variety of locations and markets, and a company culture that celebrates all the unique viewpoints and personalities that make up our talented team. View our Employee Benefits Guide for more information. Things to Note *Actual pay will be determined based on the candidate's years of experience, licensure status, location, level of proficiency, and other job-related factors (as permitted by law). This position is also eligible for an annual performance bonus. **Applicants must be currently authorized to work in the United States on a full-time basis. Cushing Terrell will not sponsor applicants for work visas. ***The majority of the time, a person in this role will be sitting in an office with limited physical requirements. This may require individuals to bend, stretch, twist, and reach. Cushing Terrell is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, or national origin, or any other characteristic protected by applicable federal, state, or local laws and ordinances. Contact ************ if you require assistance or accommodation during the employment application process. Note to recruitment agencies: Cushing Terrell does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of Cushing Terrell without a prior written search agreement will be considered unsolicited and the property of Cushing Terrell.

Job Description As an electrical engineer, you will perform a variety of assignments including conceptual design, engineering analysis, detailed sub-system electrical design, integration, test, and manufacturing and field support. A strong candidate will possess a broad range of engineering skills and could perform as an individual contributor or as a team lead. You will have the opportunity to work in a multi-functional team environment with a diverse array of exciting technologies and products that directly support our nation's war fighters. Responsibilities Perform detailed design of integrated electrical and communications systems on vehicles. Perform analysis, integration, and testing. Contribute to concept development as part of internal cross-functional design teams, including prototyping and production support. Prepare high-quality formal engineering documentation such as drawings, presentations, specifications, design presentations to customers, test plans, and test reports. Support proposal activity, providing input to cost estimates and risk assessments. May lead a design team. Will plan product development, produce technical white papers, and brief management/customers on planning and progress. Education & Experience Level 2 A Bachelor's Degree in Electrical, or Electro-Mechanical Engineering with 2 or more years' experience is required, or Master's Degree with 1 year of experience. Level 3 A Bachelor's Degree in Electrical, or Electro-Mechanical Engineering with 5 or more years' experience is required, a similar or Systems Engineering Master's or PhD with 3 or more years' experience is preferred. Team leadership experience is preferred. Requirement Extensive design and integration experience in military and/or commercial systems, control systems, EMI/EMC, power and safety. Proven track record of innovation and problem solving in cross functional teams. Familiarity with Systems Engineering, and Hardware-in-the-Loop simulation & test is required. Design and integration experience in some or all of the products and practices below: Cable design Hardware Safety and Risk analysis RF link budgets Hardware Environmental and Electromagnetic qualification to military standards HALT and ESS testing GPS and RF communication systems integration AC and DC power and motors, motor controllers, and brakes Ethernet and networking, RS232/422, CAN bus Batteries (Lithium) Power converters Fault tree development and criticality analysis Programming and algorithm development Grounding and environmental control Power test equipment such as electronic load banks The candidate should have hands-on experience troubleshooting electrical cabling and digital communication Wired Ethernet and Network configuration experience is a plus Eligible to obtain a security clearance

Job Description Our client, a privately owned and well-established specialty manufacturing company based in the Greater New Orleans area, is seeking an Electrical Engineer due to growth. This is an excellent entry level opportunity with a company that offers a comprehensive compensation and benefits package, including an annual bonus, and a great corporate culture which fosters loyalty and very low turnover. Qualifications include the following: BS in Electrical Engineering or Computer Science 1-3 years of related electrical engineering experience in an industrial environment Experience with programming, C and embedded firmware is required Linux, Visual Studio, HMI design, and PLC programming experience highly preferred

Are you ready to kickstart your engineering career with exciting projects in the energy distribution sector? Join us as an Entry Level Power Distribution Engineerand be part of a dynamic team that makes a real impact! What You'll Do: * Design Engineering: Produce innovative engineering designs for energy distribution projects. * Project Management: Prepare forestry trimming requests, facilitate permit and Right-of-Way acquisition, develop BOMs, estimate costs, and more. * Support Major Projects: Work on major distribution projects for the utility industry using CAD for drafting/design work and ArcFM. * Leadership Projects: Engage in projects related to electric power distribution and leadership, specifically make-ready and smart antenna. * Construction Support: Provide engineering support during construction, including post-construction reviews to ensure all standards are met. * Site Inspections: Travel to sites as needed, perform inspections, and return to the office to perform engineering design work. Skills & Qualifications: * Education: B.S. degree in Electrical Engineering or Mechanical Engineering. * Experience: 0-1 year of experience or basic knowledge in the electric utility industry, including primary and secondary distribution systems, utility standards, design software packages, and general construction knowledge. * Interpersonal Skills: Strong interpersonal skills, self-motivation/initiative, and a desire to learn. * Communication: Ability to communicate clearly both verbally and in writing with all levels in the organization and with outside clients and agencies. * Analytical Competence: Ability to interact with a variety of individuals, including engineers and experienced distribution system designers. Work Environment: * Office Environment: 40 hours per week, with some overtime depending on deliverables (must be approved by leadership). * Dress Code: Business casual. * Travel: The role may require 5-10% travel. Why Join Us? * Innovative Projects: Work on exciting and impactful projects. * Career Growth: Opportunities for professional development and mentorship. * Dynamic Team: Collaborate with enthusiastic and supportive professionals. * Flexible Work Environment: Potential for a hybrid schedule after 6 months. * If you're passionate about engineering and eager to start your career, we want to hear from you! Apply now and be part of a team that values innovation, growth, and collaboration. Pay and Benefits The pay range for this position is $30.00 - $31.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in New Orleans,LA. Application Deadline This position is anticipated to close on May 8, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. Diversity, Equity & Inclusion At Actalent, diversity and inclusion are a bridge towards the equity and success of our people. DE&I are embedded into our culture through: * Hiring diverse talent * Maintaining an inclusive environment through persistent self-reflection * Building a culture of care, engagement, and recognition with clear outcomes * Ensuring growth opportunities for our people The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

ATTN EMPLOYMENT AGENCIES: TECHCRANE IS NOT INTERESTED IN YOUR SOLICITATION OR OFFERINGS. TECHCRANE IS A DIRECT HIRE COMPANY ONLY. Job Purpose: Design, develop, test or supervise the manufacturing and installation of electrical equipment, components or systems for industrial machinery. Essential Functions • Confer with engineers, customers and others to discuss existing or potential engineering projects and products. • Design, implement, maintain and improve electrical instruments, equipment, facilities, components, products and systems for industrial purposes. • Operate computer-assisted engineering and design software and equipment to perform engineering tasks that include but are not limited to 3D modeling and schematic creation. • Direct and coordinate manufacturing, construction, installation, maintenance, support, documentations and testing activities to ensure compliance with specifications, codes and customer requirements. • Perform detailed calculations to compute and establish manufacturing, construction and installations standards and specifications. • Inspect completed installations and observe operations to ensure conformance to design and equipment specifications and compliance with operational and safety standards. • Prepare specifications for purchase of materials and equipment. • Prepare and study technical drawings, specifications of electrical systems and topographical maps to ensure that installation and operations conform to standards and customer requirements. • Troubleshoot issues and recommend remedial measures Qualifications • Must have Bachelor's degree in Electrical Engineering or related field; NEC, IEC, NFPA, and related normative standards knowledge is highly preferred. • Proficient in drawing practices and procedures (drafting and modeling practices). • Cursory knowledge in marine crane design; knowledge of manufacturing processes and materials. • Experience using CAD tools, solid modeling software, electrical simulation and other engineering computer programs. • Proficient in MS Office and general computer applications. • Must be detail-oriented and thorough; able to solve complex problems and make decisions. • Good communication and time-management skills. • Must have valid drivers license Physical and Mental Demands • Will spend long hours sitting and using office equipment and computers. • Regularly required to stand, walk, stoop, bend or kneel; reach with hands and arms. • Use hands to handle or operate standard office equipment and measuring devices. • Near vision and ability to adjust focus; able to talk and hear; ability to visualize. • May spend long hours in intense concentration requiring attention to detail and accuracy. • There are a number of deadlines associated with this position which may cause significant stress. • May be required to climb and balance; work at heights. • Occasionally lift materials and supplies. Work Environment • Will spend majority of time in office setting. • May occasionally spend time in warehouse, assembly shop and welding shop. • Noise level is usually low to moderate but may be very loud. • May involve hazardous materials, fumes, moving parts/equipment, electrical shock risk, extreme heat (welding) and extreme cold (liquid nitrogen). • Severe hot weather is likely and severe cold weather is possible on occasions when working outside of office.

Your Opportunity as Principal Controls Engineer - TSO The Principal Controls Engineer will lead and support complex automation, controls, and technology initiatives across multiple manufacturing sites. Responsibilities include managing projects from concept through execution, establishing and maintaining engineering standards, engaging with vendors to drive innovation, and providing corporate technical support. This role requires close collaboration with plant leadership, engineering teams, and operations to ensure successful implementation and alignment with business objectives. Location: You can pick to work at any of these locations: Orrville, OH, Arkadelphia, AR, Buffalo, NY, Columbus, GA, Decatur, AL, Emporia, KS, Lexington, KY, Longmont, CO, McCalla, AL, Memphis, TN, New Orleans, LA, Scottsville, KY, or Topeka, KS Work Arrangements: Approximately 30% Travel to other sites 100% on-site at the plants. AM Shift (Mon-Fri 8am-5pm) - Flexibility required. Willingness to flow to the work as needed In this Role You Will: Projects: Support, lead, or manage larger automation, controls, and technology projects at manufacturing sites, including possible installation oversight. Collaborate with engineering and operations leaders from feasibility through startup and CQV (commissioning/qualification/verification). Standards and Best Practices: Apply, maintain, and develop engineering standards to ensure consistency and compliance with NFPA 70, NFPA 70E, NFPA 79, NEC, OSHA 1910. Communicate standards, guidance, and recommendations to engineering and controls personnel at the sites. Vendor Engagement: Work closely with vendors to establish accurate quotations and resolving issues when needed. Leverage our internal resources to ensure terms and conditions are acceptable. Proactively engage with outside companies to explore new technologies. Corporate Support: Provide C&IS support to operations, ensuring alignment with business objectives. Support MES and IS Operations when priorities align. Automation Landscape: Understand current automation and technology state and drive targeted improvements, reapplications, and emerging technologies as part of the greater Operations Technology Team. Expert in Key Technologies: Serve as the subject matter expert for key technologies, providing guidance and support to the engineering and operations teams. The Right Role for You We are bold, kind, strive to do the right thing, we play to win, and we believe in a strong community that thrives together. Our culture is rooted in our Basic Beliefs, and we believe in supporting every employee by meeting their physical, emotional, and financial needs. What We are Looking For: Minimum Requirements: Bachelor's degree in engineering or 20+ years of equivalent plant experience 8+ years in controls/automation 5+ years in manufacturing 2+ years of managing others Strong knowledge of control hardware/software (Allen Bradley PLC and Rockwell FactoryTalk platforms) Familiarity with NFPA and OSHA guidelines as they apply to electrical, controls, and automation Additional skills and experience that we think would make someone successful in this role: Knowledge with plant systems software (Proficy, Project Management, eAM, etc.) Mechanical/electrical experience in food manufacturing Ability to collaborate across departments and sites Remote management capability Strong judgement and adaptability Work Environment: This job operates in a manufacturing environment. The noise level in the work environment and manufacturing sites can be high. Physical Demands: Regularly required to talk and hear. Frequently required to stand; walk; use hands and fingers to handle or feel; and reach with hands and arms. Occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. Able to lift objects up to 50 pounds frequently. May push and pull heavy objects. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Learn More About Working at Smucker Helping our Employees Thrive Delivering on Our Purpose Our Continued Commitment to Ensuring a Workplace for All Follow us on LinkedIn #LI-TJ1 #INDSA

Your Opportunity as Principal Controls Engineer - TSO The Principal Controls Engineer will lead and support complex automation, controls, and technology initiatives across multiple manufacturing sites. Responsibilities include managing projects from concept through execution, establishing and maintaining engineering standards, engaging with vendors to drive innovation, and providing corporate technical support. This role requires close collaboration with plant leadership, engineering teams, and operations to ensure successful implementation and alignment with business objectives. Location: You can pick to work at any of these locations: Orrville, OH, Arkadelphia, AR, Buffalo, NY, Columbus, GA, Decatur, AL, Emporia, KS, Lexington, KY, Longmont, CO, McCalla, AL, Memphis, TN, New Orleans, LA, Scottsville, KY, or Topeka, KS Work Arrangements: * Approximately 30% Travel to other sites * 100% on-site at the plants. AM Shift (Mon-Fri 8am-5pm) - Flexibility required. Willingness to flow to the work as needed In this Role You Will: * Projects: Support, lead, or manage larger automation, controls, and technology projects at manufacturing sites, including possible installation oversight. Collaborate with engineering and operations leaders from feasibility through startup and CQV (commissioning/qualification/verification). * Standards and Best Practices: Apply, maintain, and develop engineering standards to ensure consistency and compliance with NFPA 70, NFPA 70E, NFPA 79, NEC, OSHA 1910. Communicate standards, guidance, and recommendations to engineering and controls personnel at the sites. * Vendor Engagement: Work closely with vendors to establish accurate quotations and resolving issues when needed. Leverage our internal resources to ensure terms and conditions are acceptable. Proactively engage with outside companies to explore new technologies. * Corporate Support: Provide C&IS support to operations, ensuring alignment with business objectives. Support MES and IS Operations when priorities align. * Automation Landscape: Understand current automation and technology state and drive targeted improvements, reapplications, and emerging technologies as part of the greater Operations Technology Team. * Expert in Key Technologies: Serve as the subject matter expert for key technologies, providing guidance and support to the engineering and operations teams. The Right Role for You We are bold, kind, strive to do the right thing, we play to win, and we believe in a strong community that thrives together. Our culture is rooted in our Basic Beliefs, and we believe in supporting every employee by meeting their physical, emotional, and financial needs. What We are Looking For: Minimum Requirements: * Bachelor's degree in engineering or 20+ years of equivalent plant experience * 8+ years in controls/automation * 5+ years in manufacturing * 2+ years of managing others * Strong knowledge of control hardware/software (Allen Bradley PLC and Rockwell FactoryTalk platforms) * Familiarity with NFPA and OSHA guidelines as they apply to electrical, controls, and automation Additional skills and experience that we think would make someone successful in this role: * Knowledge with plant systems software (Proficy, Project Management, eAM, etc.) * Mechanical/electrical experience in food manufacturing * Ability to collaborate across departments and sites * Remote management capability * Strong judgement and adaptability Work Environment: This job operates in a manufacturing environment. The noise level in the work environment and manufacturing sites can be high. Physical Demands: * Regularly required to talk and hear. * Frequently required to stand; walk; use hands and fingers to handle or feel; and reach with hands and arms. * Occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. * Able to lift objects up to 50 pounds frequently. * May push and pull heavy objects. * Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Learn More About Working at Smucker Helping our Employees Thrive Delivering on Our Purpose Our Continued Commitment to Ensuring a Workplace for All Follow us on LinkedIn #LI-TJ1 #INDSA