Controls engineer jobs in Passaic, NJ - 616 jobs

A Brooklyn health care agency is seeking an experienced Full Charge Controller to oversee all accounting and financial operations. This senior-level position is ideal for a detail-oriented professional with strong leadership abilities and prior experience in healthcare finance. Key Responsibilities Oversee full-cycle accounting and financial reporting Manage budgeting, forecasting, and financial analysis Supervise and lead the accounting/finance team Ensure compliance with healthcare regulations and financial standards Collaborate with senior leadership on financial planning and strategy Specific Qualifications and Requirements Minimum of 5 years of accounting/controller experience Healthcare industry experience preferred CPA or equivalent certification required Proven team management experience Strong organizational, analytical, and leadership skills #J-18808-Ljbffr

Join AWS as a Senior Hardware Development Engineer to architect and lead the development of next‑generation cloud infrastructure hardware. Drive innovation in complex PCBA designs utilizing cutting‑edge FPGA SoCs, working with world‑class engineers in our dedicated product development lab. Key Job Responsibilities Architect and lead development of complex PCB designs incorporating FPGA SoCs Drive system‑level hardware architecture decisions and technical requirements Lead new product introduction (NPI) processes with contract manufacturers Develop and validate high‑speed digital and mixed‑signal circuits Ensure designs meet EMI/EMC compliance, thermal, and signal integrity requirements Partner with FPGA/firmware teams to define hardware interfaces and requirements Lead design reviews and drive technical consensus across multiple teams Mentor junior engineers and establish hardware engineering best practices A Day in the Life You will work with a cross‑functional team of hardware, software, and FPGA engineers in our dedicated product development lab. Your day might include architecting new hardware solutions, reviewing PCB designs, collaborating with contract manufacturers, debugging prototypes, or mentoring team members. You'll partner closely with product managers to define requirements, work with FPGA engineers to optimize hardware interfaces, and engage with manufacturing teams to ensure smooth production ramp‑up. Basic Qualifications Bachelor's degree in Electrical Engineering or related field 10+ years of hardware engineering experience Experience in motherboard design, PCB design including schematic capture, stack‑up and circuit board layout Experience with DFx (Design for cost, test, manufacturing) Experience with FPGA SoC hardware integration, hardware validation and debugging Current, active US Government Security Clearance of Secret or above Preferred Qualifications Experience with AMD/Intel FPGA SoC Expertise in signal integrity and power integrity analysis and PCB design tools (Allegro, Altium, or similar) Experience with high‑volume manufacturing and NPI processes Experience with industry standards (PCIe, DDR, SERDES, etc.) Current, active US Government Security Clearance of Top Secret or above Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, please visit ********************************************************* for more information. Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $128,600/year in our lowest geographic market up to $213,600/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job‑related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign‑on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit ******************************************************** This position will remain posted until filled. Applicants should apply via our internal or external career site. #J-18808-Ljbffr

A leading RF components manufacturer in New York seeks an Engineering professional to design and scale automated production test systems for RF and Microwave components. The ideal candidate will possess a relevant engineering degree and have a minimum of 5 years of experience with robotic systems and automation. This is a full-time position offering a salary range of $100,000 - $125,000 per year and comprehensive benefits. #J-18808-Ljbffr

Construction QA/QC and Electrical Commissioning Engineer About the Role A Global Real Estate and Engineering firm is seeking a skilled Construction QA/QC and Electrical Commissioning Engineer to support mission-critical and data center projects. The role involves overseeing electrical quality assurance, system commissioning, and field testing across all project phases. The ideal candidate will possess strong technical acumen, excellent organizational skills, and the ability to work collaboratively with cross-functional teams in fast-paced environments. Key Responsibilities Lead and execute QA/QC and electrical commissioning programs in alignment with ASHRAE guidelines. Conduct system inspections, testing, and verification for electrical systems, including UPS, switchgear, generators, and EPMS. Develop and implement commissioning plans, checklists, and test scripts (functional and integrated systems tests). Perform design reviews, submittal reviews, and field inspections for conformance with specifications. Coordinate with contractors, engineers, and AHJs throughout project delivery. Develop and maintain commissioning documentation, SOPs, MOPs, and Systems Manuals. Utilize QA/QC and commissioning software such as BIM360, CxAlloy, and Facility Grid. Perform electrical testing and analyze results using tools such as PQMs, thermography, and ground testing equipment. Support the planning, scheduling, and reporting of commissioning progress and performance. Provide vendor training evaluation and system performance verification. Qualifications Bachelor's degree in Electrical Engineering or related technical field (ABET-accredited preferred). Minimum 10 years of relevant electrical engineering or field-testing experience, including 5 years in commissioning or QA/QC. Commissioning Professional certification preferred. PE or PMP designation is an asset. Proven expertise in testing and commissioning electrical power systems (UPS, ATS, STS, generators, PDUs, etc.). Strong analytical, communication, and leadership skills. Proficiency in MS Project, Word, and Excel. Demonstrated ability to consolidate and report project performance data. Experience in consultancy or owner's representative organizations is advantageous. Work Environment Field-based role with travel up to 50% across the U.S. Collaborative, high-performance team environment focused on mission-critical projects.

A global engineering company in New York is seeking a Rail Vehicle Electrical Engineer to develop innovative solutions for rail systems. The role requires a Bachelor's degree in Electrical Engineering, 10+ years of experience in electrical systems design, and effective team collaboration skills. The compensation ranges from $120,000 to $155,000, reflecting individual experience and qualifications. #J-18808-Ljbffr

A major transportation organization in New York is seeking an Electrical Engineer to oversee multiple capital projects. The ideal candidate should have a valid New York Professional Engineer's License and at least four years of relevant experience. Responsibilities include managing project documentation, ensuring compliance with standards, and resolving project issues effectively. Competitive salary based on experience is provided in a dynamic work environment. #J-18808-Ljbffr

Our client, a Fortune 500 pharmaceutical company, has engaged GForce Life Sciences to provide a Senior Electrical Engineering Manager. The Electrical PM will have expertise in electrical systems including electrical distributed power generation, feeds, distribution, lighting, fire alarm, emergency power, UPS, and low voltage systems. The PE is responsible for overseeing the engineering of these systems for major capital projects and initiatives from conceptualization through programming, design, bidding, construction, commissioning, and close out. The Electrical PM will be responsible for multiple high-complexity projects of diverse scope that require an understanding of state of the art construction techniques and a high level of expertise in electrical systems, as well as rigor in compliance, and the highest standard of care. Science projects include research laboratories, vivarium, pilot scale manufacturing, major scientific equipment, amenity space, outdoor plaza, site lighting, and infrastructure projects. The Electrical PM shall collaborate with the project team to effectively identify innovative solutions and bring clarity to the project process using a sophisticated analytical approach and sound judgement. Core focus areas include defining and meeting project goals for electrical systems, reviewing budgets, schedules, scopes, and quality, as well as risk mitigation and responding to field conditions and construction logistics and challenges. The Electrical PM will be responsible to lead design teams and Construction Managers in both the pre-construction due diligence, design and scoping process with a focus on quality management, project controls, and user engagement as well as leading their teams through the bidding and construction administration process with a focus on field coordination, commissioning, substantial completion and close out. Responsibilities Assists the Project Management team in developing the budget and schedule for design and construction projects, including renovations and green field projects. Works closely with Project Management, Engineering, Space Planning, EHS, Operations, and User teams to fully and rigorously document the electrical system requirements in the Owner's Project Requirements document. Performs preliminary due diligence explorations of existing electrical systems during project initiation to identify any potential risks to the project and any opportunities for improving the building systems of existing buildings. Assists the Project Manager and Procurement in the development of scopes of work for design professionals, construction managers, general contractors and commissioning agent RFPs. Assist in the evaluation and bid leveling of proposals. Participates in regular project meetings. Works directly with hired MEP engineers, consultants, and contractors to answer questions, resolve issues and develop solutions. Provides supervision for all stages of the development and documentation of electrical requirements for lab and other equipment for the project. Collaborates with the Project Management team, internal engineers, end users, the Asset Management team, EHS, design professionals, lab equipment vendors, design professionals and contractors to ensure that all electrical system requirements for the equipment are met. Provides detailed reviews of and comments on due diligence reports, test fits, Basis of Design documents, room data sheets, construction documents and specifications prepared by the design professionals, checking for thoroughness, accuracy and compliance with the project requirements, design and documentation standards and minimize errors and omissions. Identifies long lead time equipment for potential Early Works purchasing by the contractor Works with the Project Managers, Design Professionals and Contractors to find solutions to mitigate costs and schedule delays due to errors and omissions in the design documents and unforeseeable field conditions Reviews shop drawings and submittals, RFI responses, and Change Orders Makes frequent site visits to ensure that electrical requirements are being implemented correctly during construction and creates field reports. Reviews Design Professional punch lists. Manages commissioning, auditing, & validating facilities systems for Capital Projects. Assists the Asset Management and Operations team in preparing equipment lists for import into the Integrated Workplace Management System Coaches and Mentors other members of engineering staff and supervises day to day operation of electrical systems. Interacts with municipalities and Con-Ed to obtain building permits and inspections. Supervises, coordinates, and schedules work with outside contractors and internal technicians. Audits, tests, commissions, and validates Facilities systems and also provide specialized engineering support services to RGC, PMPD, PCD, IT, & Vivarium groups. Requirements Bachelor's degree in Engineering required Minimum of 5 years in an electrical engineering role In depth knowledge and extensive experience in electrical systems for complex life science laboratory and vivarium projects Skilled in the use of AutoCAD, Revit, Navisworks, SharePoint and Bluebeam Revu IWMS system experience Terms & Start Onsite 4 days/week in Tarrytown, NY 12+ month contract Start ASAP Benefits included (Medical, Dental, Vision)

Title: Onsite Support & Hardware Engineer Department: Projects Job Type: Full-Time Ready to Escape the IT Grind? Come Build Something Greater with My IT Crew. At My IT Crew, we believe every team member deserves a voice. Since 2016, we've been a leader in the Managed Service Provider (MSP) space by doing things differently-empowering our people, embracing innovation, and delivering exceptional service. We are looking for an Onsite Support & Hardware Engineer to join our Brooklyn team. This role is designed with a structured transition: You will begin your journey with a dedicated 2-3 months immersion in Hardware & Inventory. During this initial phase, you will work internally to diagnose repairs, organize the stockroom, and master the equipment that powers our clients' businesses (from desktops and laptops to kiosks). Once this foundational period is complete, you will transition to your primary role as an Onsite Support Engineer. You will then serve as the trusted face of My IT Crew, traveling to client sites to build relationships and solve technical problems, utilizing the deep hardware expertise you gained during your initial training. This position is ideal for someone who wants to know the "nuts and bolts" of the hardware before becoming the hero who keeps our clients up and running onsite. What You'll DoPhase 1: Hardware Engineering & Inventory (Office-Based / First 2-3 Months) Diagnose and repair a variety of hardware systems including desktops, laptops, kiosks, and networking equipment. Manage the full lifecycle of hardware assets: receiving, labeling, storing, shipping, and tracking. Coordinate with vendors for warranty claims, RMA processing, and hardware replacements. Maintain accurate inventory logs and service records in ConnectWise and asset systems. Ensure the workspace and equipment areas remain clean, organized, and secure. Pre-configure and test new equipment (Windows/Linux) before deployment. Phase 2: Onsite Support & Incident Response (Primary Role) Deploy to client locations to resolve critical system downtime, hardware failures, or network outages that cannot be fixed remotely. Perform onsite installations, upgrades, and physical maintenance of IT systems. Serve as the face of My IT Crew during site visits, collaborating with client staff to reassure them and resolve issues efficiently. Act as a liaison between the client and the internal service desk during complex onsite troubleshooting. What You BringExperience & Education 3+ years of Windows-based IT support, systems administration, or hardware repair experience. Associate's or Bachelor's degree in Computer Engineering/IT (Preferred) or equivalent experience. Certifications: CompTIA A+ is highly preferred. Additional certifications (Network+, Security+, Microsoft Modern Desktop) are a major plus. Technical Skills Proven experience with hands-on hardware troubleshooting (component replacement, diagnostics). Strong understanding of PC components, operating systems (Windows/Linux), and networking basics (TCP/IP, switching). Familiarity with ticketing systems (ConnectWise preferred), documentation practices, and asset tracking. Experience with shipping/receiving, labeling, and equipment logistics. Soft Skills Adaptability: Ability to switch gears between detailed bench work and high-pressure onsite client service. Communication: Excellent interpersonal skills to work effectively with clients during outages. Organization: Detail-oriented mindset for tracking inventory, RMAs, and documentation. Problem Solving: A proactive mindset with strong critical thinking skills. Why You'll Love It Here Useful, living documentation at your fingertips. A team that listens-and learns from each other. Weekly collaborative trainings, not boring lectures. New tools, new tech, and no gatekeeping. A company that rewards initiative and values growth-both personal and professional. Sound like you? Let's talk. My IT Crew isn't just a place to work-it's a place to grow, contribute, and thrive. Come be part of a team that's redefining what IT support can be. #J-18808-Ljbffr

We are seeking a detail-oriented and experienced Electrical Design Engineer to join our construction project team. The ideal candidate will be responsible for developing, reviewing, and managing electrical designs and drawings for building and infrastructure projects in accordance with industry codes, client specifications, and project requirements. Key Responsibilities: Develop electrical design drawings including power distribution, lighting, fire alarm, communication, and grounding systems using AutoCAD/Revit or other relevant software. Perform load calculations, short circuit analysis, voltage drop, and coordination studies. Ensure designs meet NEC, NFPA, IEEE, local building codes, and client-specific standards. Collaborate with civil, structural, and mechanical engineers to coordinate all building systems. Review and approve shop drawings, submittals, and material specifications. Provide technical support during construction, including responding to RFIs and conducting site inspections. Prepare design documentation including schematics, schedules, and specifications. Attend project meetings, site visits, and coordinate with contractors and vendors as needed. Ensure all designs are cost-effective, energy-efficient, and constructible. Participate in value engineering and identify opportunities for design optimization. Qualifications: Bachelor's degree in Electrical Engineering (B.E./B.Tech or equivalent). Professional Engineer (PE) license or EIT preferred (or equivalent certification based on region). 3-7 years of electrical design experience in the construction industry (buildings, infrastructure, or industrial projects). Proficiency with AutoCAD, Revit, and electrical design software such as ETAP, SKM, or similar. Strong understanding of applicable codes and standards (NEC, NFPA, IEEE, IEC). Experience with construction documents and field coordination. Excellent communication and teamwork skills. Ability to work on multiple projects simultaneously and meet deadlines

Argo Group International Holdings, Inc.and American National, US based specialty P&C companies, (together known as BP&C, Inc.) are wholly owned subsidiaries of Brookfield Wealth Solutions, Ltd. ("BWS"), a New York and Toronto-listed public company. BWS is a leading wealth solutions provider, focused on securing the financial futures of individuals and institutions through a range of wealth protection and retirement services, and tailored capital solutions. This position will be responsible for activities that support developing, implementing, and maintaining elements of data management and compliance goals, strategies, communications, governance models, and plans necessary to establish and maintain the appropriate business and operational strategy for Argo Group data governance and compliance purposes. This includes the development and implementation of data governance, protection, and privacy programs for the protection of data throughout its lifecycle. In addition, the role will work with stakeholders to define the applicable information governance, data protection and data privacy requirements in all of Argo Group's relevant jurisdictions. Job Description At Argo, the Data Protection & Privacy Engineer plays a key role within the Argo Security Engineering & Architecture Team. You will develop a strategy and operationalize it to protect data and ensure compliance with global regulations. Primary Responsibilities: Build and document the operational landscape including implementation and monitoring of technical controls to address identified risks. Establish plans to protect data and information systems. Develop standards for secure and compliant data classification and handling. Coordinate technical capabilities to ensure smooth operation of data protection and privacy programs. Liaise with business and technology stakeholders on data protection matters. Influence positive data protection and privacy outcomes during times of change and transition. Further implement and maintain the data protection toolset including data loss prevention and database activity monitoring. Maintain inventory of relevant corporate data assets and personal data elements. Support critical data protection processes such as subject access requests, data mapping, and cookie compliance. Contribute to incident response planning and fulfill breach investigation and response aspects of the plan. Fulfill relevant data protection and privacy audit requests. Govern relevant processes operated by our service providers and outsourcers. Develop and operate reporting capabilities relevant to privacy and data protection. Maintain regular on-site presence to support effective collaboration, communication, confidentiality, and timely business operations through active participate in in-person meetings, team activities, and organizational initiatives. Qualifications: 5 years of experience working with sensitive and confidential information and projects ideally in a global role. Certified Information Privacy Technologist (CIPT) or Certified Information Privacy Manager (CIPM) or other certifications, such as CIPP/E CIPP/US, are preferred. Experience and/or technical certifications for relevant technologies are preferred - e.g Microsoft Purview Information Protection. Must be able to demonstrate knowledge of data protection technologies such as data loss prevention (DLP) and database activity monitoring. Hands-on experience with privacy and data protection technologies is preferred. Experience with data flow mapping in complex environments is preferred. Must be able to articulate a generic set of risks and issues introduced by global privacy and data protection regulations. Strong knowledge of data protection technologies such as data loss prevention and database activity monitoring. Ability to develop technical capabilities to protect data processed across a wide range of application and infrastructure types. Experience using technology to enable compliance with global privacy and data protection regulations. Adoption and development of privacy by design principles. Excellent organizational skills and ability to operate and communicate effectively while meeting multiple deadlines and completing projects simultaneously. Ability to analyze information and construct an action plan tailored to resolve issues effectively and cooperatively. Ability to articulate problems in terms of risk and present them to a range of audiences - technical, non-technical, and executives. The base salary range provided below is for hires in those geographic areas only and will be commensurate with candidate experience. Pay ranges for candidates in other locations may differ based on the cost of labor in that location. In addition to base salary, all employees are eligible for an annual bonus based on company and individual performance as well as a generous benefits package. This position will be required to go into one of our offices five days a week. Chicago - $125.5k - $149.2k New York City - $136.9k - $163k PLEASE NOTE: Applicants must be legally authorized to work in the United States. At this time, we are not able to sponsor or assume sponsorship of employment visas. If you have a disability under the Americans with Disabilities Act or similar state or local law and you wish to discuss potential reasonable accommodations related to applying for employment with us, please contact our Benefits Department at . Notice to Recruitment Agencies: Resumes submitted for this or any other position without prior authorization from Human Resources will be considered unsolicited. BWS and / or its affiliates will not be responsible for any fees associated with unsolicited submissions. We are an Equal Opportunity Employer. We do not discriminate on the basis of age, ancestry, color, gender, gender expression, gender identity, genetic information, marital status, national origin or citizenship (including language use restrictions), denial of family and medical care leave, disability (mental and physical) , including HIV and AIDS, medical condition (including cancer and genetic characteristics), race, religious creed (including religious dress and grooming practices), sex (including pregnancy, child birth, breastfeeding, and medical conditions related to pregnancy, child birth or breastfeeding), sexual orientation, military or veteran status, or other status protected by laws or regulations in the locations where we operate. We do not tolerate discrimination or harassment based on any of these characteristics. The collection of your personal information is subject to our HR Privacy Notice Benefits and Compensation We offer a competitive compensation package, performance-based incentives, and a comprehensive benefits program-including health, dental, vision, 401(k) with company match, paid time off, and professional development opportunities.

Role: Controls Engineer Employment Type: Direct Hire Compensation: Up to $95K Why Work for Our Client? * Perks: Free food products - enjoy freshly made goods daily * Benefits: Affordable employer-paid comprehensive benefits package * Growth: Strong opportunities for advancement and professional development Key Responsibilities * Program and troubleshoot Allen Bradley systems (RsLogix 500/5000, HMIs, drives) * Evaluate equipment and provide recommendations for improvements and safety enhancements * Train and support plant personnel at all operational levels * Maintain complete understanding of plant automation systems * Modify programs and troubleshoot complex control systems * Maintain logs, documentation, and system records Candidate Requirements Education & Experience: * Formal training in Allen Bradley systems, drives, and operator interfaces (required) * Manufacturing experience preferred (food/baking industry a plus) Essential Skills: * Extensive Allen Bradley programming experience (critical requirement) * 480-volt electrical control circuits and networking (Ethernet) * PowerFlex drives, Panel View HMI, UltraWare Servo systems * System evaluation and continuous improvement mindset * Training and mentoring capabilities Hiring Considerations Ideal candidate is a self-motivated controls professional who stays current with evolving automation technology and excels at cross-functional collaboration. Must demonstrate strong troubleshooting skills and proactive approach to safety and productivity improvements. To Apply: Contact Kristie at kharnish@blackrockres.com with your resume and best time to reach you. #LI-KH1

ATS Company: Industrial Automation Electrical Designer, SR Join our global team at ATS Industrial Automation where we create complex automation solutions at the highest level that sustainably impact lives around the world. At ATS, a publicly traded global company with a proud 40-year history, we help drive the future with our factory-wide automation solutions. At ATS Industrial Automation, what we do matters - both to our customers and to their customers. With 1000 skilled employees around the world, we design, build and service mission-critical automated assembly and test solutions for mobility, nuclear and specialty automation. Our customers are leaders in their industries and rely on us to deliver what we promise - on time and on budget. Combined with our broad product portfolio, financial strength and global presence, we provide our customers with the best automation solutions wherever and whenever they need them. Major Duties Total Compensation & Benefits: Pay Rate: $42.31 - $58.17 Eligible for 3-6% Annual Incentive Bonus Stock Purchase Plan 3 Weeks Vacation Health Care Benefits + $600 Health Care Spending Account Employee Engagement Events (Employee BBQ's and lunches, weekly treat day, etc.) Employee Development Programs Job Duties Senior Electrical Designer leads complex projects by designing and delivering advanced instrumentation solutions and electrical test systems, ensuring every project aligns with rigorous safety standards, reliability goals, and specific customer requirements. In this role you create detailed electrical design documentation-including schematics, cable routing diagrams, panel layouts, bills of materials, and requisition forms-to support seamless project execution and integration. Specific Responsibilities Lead design projects to deliver advanced solutions and electical test systems; Exhibit mastery in at least one specialized skill area (e.g., IP tester, pneumatic/hydraulic systems, solar tester), with a strong understanding of related technologies. Review and approve drawing packages for design content, accuracy, and safety, ensuring compliance with industry and company standards. Mentor and coach other designers, actively supporting team development and contributing expertise across multiple projects beyond personal workload. Independently schedule and manage own projects, collaborating with project managers to ensure timely delivery and alignment with organizational goals. Represent the division to customers on-site, leveraging technical expertise to support sales initiatives and strengthen client relationships. Manage customer interactions at a technical level, facilitating smooth project execution and reducing the project manager's technical workload. Drive continuous improvement by enhancing department methods, practices, and tools, under the direction of the department manager. Proactively identify, evaluate, and implement new technologies and methods relevant to the industry and ATS Test System products. Contribute to the achievement of departmental and company-wide improvement goals, assisting in the development and execution of strategic objectives. Ensure all business activities are conducted with the highest ethical standards and in full compliance with the ATS code of business conduct. Qualifications Education: A post-secondary technology diploma or engineering equivalent; Experience: A minimum of 10 years related electrical design experience including a minimum of 5 years designing electronic test equipment. Complete knowledge of AutoCAD Electrical and the ability to keep abreast of leading-edge instrumentation technology is essential. Why should you join ATS Industrial Automation? Be a part of an engaged, empowered and innovative global workforce We offer a robust total rewards package- Competitive starting salaries, comprehensive health and dental benefits, overtime pay, employee bonus, RSP matching, Employee Share Purchase Program We provide awesome work perks such as treat days, gourmet coffee and beverages, subsidized breakfast and lunches in our cafeteria, employee referral bonuses and lots more. We are intentional about your professional growth and development through internal career opportunities and our educational reimbursement program. The compensation offered will be based on the local job market and may vary depending on factors such as the job-related knowledge, skills, experience of the selected candidate, as well as other objective business considerations. Subject to these considerations, the total compensation package for this position may also include other elements, such as an annual cash incentive in addition to a full range of medical, retirement, and/or other benefits. Details of these benefits will be provided when the selected job candidate receives an offer of employment. This role represents an existing vacancy within the organization. ATS is in compliance with the Accessibility for Ontarians with Disability Act (AODA), 2005 and will, upon request, assist those who may require specific accommodations due to a personal disability. We would ask that those who require assistance to notify our offices as soon as possible if accommodation is necessary The ATS applicant tracking system may utilize AI software with pre‑defined, rule‑based filters to organize and manage application materials. Rule‑based filters operate solely on fixed criteria and do not perform autonomous evaluation or generate independent recommendations. All hiring decisions continue to involve human review and judgment. If you're excited about this role, but do not meet all the qualifications listed above, you are still encouraged to apply.

Continue Your Career as a Controls Engineer in a Growing Company Did you love building as a kid? Do you enjoy taking something apart, just to figure out how to put it back together? Do you geek out on robots? Our engineers drive packaging innovation, creating new ways to improve - and increase - performance. We're passionate about designing custom equipment that exceeds our customers' expectations. Our engineers partner closely not only with our customers, but also with peers across sales, manufacturing, and assembly. We offer rewarding, challenging opportunities throughout the world, across multiple packaging segments. If you're excited by how machines work and want to make them better, we want to talk to you. Do we have your attention? Keep reading. The Controls Engineer will contribute to the success of the company by designing, coding, and testing control systems for pressure sensitive labelers and integrated labeling systems for automated production lines in the packaging industry. Our Oakland Manufacturing Facility supports critical industries, including Pharmaceutical, Food and Beverage manufacturing. This position reports to the Engineering Manager. Are you intrigued by this work? Develop and maintain control system designs, schematics, and BOMs for pressure sensitive labeling systems Code, test, and debug/troubleshoot PLC & HMI programs Provide technical support for FATs, on-site installation, and after-sales support (troubleshooting both in field and over the phone) Manage electrical / controls portions of all non-standard projects Work with panel shop technicians to ensure that assembly, wiring, installation, and operation of control panels and electrical systems conform to quality standards, applicable codes, and customer requirements Handle component selection and specification Provide support to sales for equipment selection, hardware pricing, and labor estimates for customized products Write validation and design specification documentation as required Travel up to 10% to customer sites What's in it for you? There's no monopoly on innovative ideas or limits to how far you can advance with our team. We offer an open, communicative environment that fosters individual initiative. We pride ourselves in being a company where people are happy and choose to build a career. In addition to growth opportunities, as a ProMach employee, you receive more than just a paycheck. The education and experience you bring to a role with us matter. Placement within our salary range is determined based upon years of directly relatable experience for your position. These components, along with local and national compensation survey data, contribute to deciding a candidate's potential starting rate of pay. Total compensation includes your pay, potential short-term incentive opportunities, comprehensive medical/dental/vision programs, as well as life insurance, disability insurance, paid time off programs, a retirement savings plan with a company match, and a wellness program. And because we understand the importance of feeling protected, there is no waiting period for benefits - you are eligible on your first day of employment! Base Salary Range: $100,000.00-$125,000.00/yr Please note that the pay ranges listed on external job boards, outside our posting details, do not accurately reflect our internal compensation ranges. Who we're looking for? BS in Engineering (Electrical or Computer Engineering preferred) 5+ years of Controls Engineering experience Strong PLC programming skills (Allen Bradley/Rockwell, Keyence, Panasonic, others) Proficient in RsLogix/Studio5000, AutoCAD, MS Office, FactoryTalk View Experience with Vision Systems (e.g. Cognex) a plus Strong Mechanical Aptitude Experience controlling sensors, actuators, pneumatics, stepper/servo motors, VFD drives Strong oral and written communication skills Knowledge of NEC, UL, NEMA, CE, NFPA 79, PMMI, and relevant ISO/EN standard Pro Mach, Inc. was named to the Inc. 5,000 list of the fastest growing private companies in the U.S. seven times. We continue to introduce innovative products, enter new markets, expand our global presence, and actively acquire new capabilities. We have the rewards, opportunities, and the market strength of a large organization combined with the entrepreneurial culture of a small, fast-paced company. You will enjoy the benefits of working with a growing company that competes globally, with the personal touch and feel of a smaller company where you can make an impact every day. Curious about life at ProMach? Follow us on LinkedIn, Twitter, and Instagram! ProMach is an Equal Opportunity Employer. Pro Mach uses E-Verify to verify employment eligibility of all new hires to work in the United States. Pro Mach is a drug-free workplace. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. #INID #IDTEC

About Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking an experienced, highly motivated Control Systems Engineer - LabView Developer to join its rapidly growing team. The Control Systems Engineer will have ownership of the design, development, and commissioning of the control system for complex equipment within Thea Energy's stellarator fusion demonstration plant. As part of a rapidly growing team, you'll be part of the organizational build-up of a leading fusion energy company. This role will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: Work with a team of experts in developing controls for Thea Energy's systems. Architect, program, and document cutting-edge distributed Data Acquisition and Control (DAC) projects utilizing National Instruments hardware and software, such as LabVIEW, VeriStand, TestStand, SystemLink incorporating DAQ, PXI, cRIO, and RIO (FPGA) architectures. Develop modular, readable, and reusable LabVIEW code, emphasizing reliability and continual improvement. Create engineering tools, including both desktop and web-based testing applications. Integrate VHDL and C codes into hardware-in-the-loop (HIL) systems, utilizing both NI and open-source hardware and software platforms. Collaborate with hardware and systems engineers to define interfaces and requirements and ensure seamless integration of DAC/HIL solutions. Troubleshoot and swiftly resolve issues in LabVIEW-based DAC/HIL systems. Develop and execute comprehensive test plans. Document design specifications, test procedures, and user manuals for automation and acquisition systems. Ideal Experience & Skillsets: Extensive experience as a control engineer on complex, large-scale systems. Experience with magnetic confinement fusion, aerospace, or other highly technical industries. B.S. or M.S. in Computer Science, Electrical Engineering, or a related physics or engineering discipline. 5+ years of hands-on LabVIEW development experience; experience with VeriStand, TestStand and SystemLink. Proven success in advanced LabVIEW programming, focusing on Data Acquisition and Control or HIL systems, within scientific, industrial, or research environments. Proficiency with National Instruments hardware, including cRIO, PXIe, and expertise in both Windows and RT Linux environments. Competency in HIL/SIL software architecture. Proficient in the development and optimization of LabVIEW applications and LabVIEW Certification (Certified LabVIEW Developer and/or Architect) is advantageous. Exceptional work ethic and communication skills. Company Benefits: Salary range $95,000-$160,000 Comprehensive health benefits (e.g. medical/dental/vision) Employee equity stock options 20 days PTO It's not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world's hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran's status, or other characteristic protected by applicable laws and regulations.

Job DescriptionJob Summary: Instrument and Controls Engineer:The Instrument and Controls Technician is involved with the successful daily operation of the oil refining facility, and the modification and alteration of the plants automated control and power systems to accommodate business needs and ensure high plant availability. This requires close collaboration with other employees and management staff to ensure safe work and to set or re-set job priorities. Documentation, as required to document changes in plant physical or logic changes, and documentation to meet our goals of safety first, quality work and compliance with our customers' requirements and concerns. Qualifications: Instrument and Controls Engineer: High School Diploma or GED with at least 10 years I&E (I&C) experience in a chemical, food, pharmaceutical manufacturing environment. Familiarity with PLC based controls systems such as GE or Allen Bradley in a manufacturing environment. Ability to analyze and interpret technical problems related to instrumentation or PLC logic. Ability to read and understand company policies and procedures, technical datasheets or literature, P&IDs, electrical drawings (One-line drawings, loop drawings, control circuits, etc) Ability to effectively present information either verbally or via written document (e-mail, MS Word/Excel, CMMS, etc) and respond to questions from groups of managers, co-workers, customers, and the general work force. Ability to work with and apply mathematical concepts to practical situations. Preferred: New Jersey Licensed Electrician (or working towards license) Preferred: ISA Certification (Certified Control System Technician, Certified Industrial Electrician, Certified Instrument Technician) Duties & Responsibilities: Instrument and Controls Engineer: Monitor, repair, maintain and troubleshoot all field instrumentation, electrical equipment and controls systems including plant safety systems and plant power systems. Install, loop check, maintain and troubleshooting process control systems comprised of transmitters, controllers, and valves operating in a PLC system. Calibrate, monitor, repair, maintain, label and document all field instruments such as transmitters, controllers, valves, PLCs, plant safety systems, plant power systems, utility systems (HVAC), pH and conductivity meters Install, maintain, and troubleshoot electrical distribution and protection circuits up to 480VAC. Fabricate and install rigid and flexible conduit, and run power and control wiring based on electrical code requirements Properly select, install and wire 120V-480V motors, single phase to three phase based on needs Strong working knowledge of National Electrical Code (NFPA 70) Evaluate current instrumentation technology for process equipment and make recommendations for improvements. Ensure all work orders are completed, documented and closed out in the site CMMS system, as per procedure. Provide on-call support during assigned weeks to ensure 24/7 coverage Provide practical solutions to operations/ controls problems. Scope, estimate and execute small capital / maintenance projects along with maintenance manager/ project director/ operations, etc. Train other employees considering their needs and company needs. Oversee the work by contractors as required on site to ensure safe and quality performance. Look for opportunities to help work get done safer, faster and more cost effectively. Onsite Personnel is an equal opportunity employer committed to hiring a diverse workforce in an inclusive culture environment. Onsite Personnel does not discriminate based on disability, veteran status or any other basis protected under federal, state, or local laws

SYSTRA is a global leader in transport engineering infrastructures. With a growing presence in multiple geographic locations across the country including New York (Headquarters), New Jersey, Philadelphia, Los Angeles, and Washington, DC, SYSTRA is a key player in the Railroad and Mass transit industries. With more than 30 years of global experience, SYSTRA has worked alongside major transit agencies in over 150 countries to provide efficient and reliable rail transportation. SYSTRAs broad project experience offers fantastic career development prospects for all our employees. SYSTRA is currently seeking qualified Train Control System Engineer located in the New York City area. Responsibilities: * Review technical submittals from contractors * Prepare and distribute comments on technical submittals from contractors (design documents, software specifications, plans and procedures, test reports) * Address contractors request for information from contractors * Prepare and attend technical meetings. Write meeting minutes. * Follow up lab tests * Follow up site installation tests Qualifications: * Systems Engineering * Software development and testing * Train Control Systems (CBTC) * Microsoft Office required * Good Communications skills * Ability to work with others * Capability to assume additional responsibilities * Organization Skills * Bachelors in Electrical Engineering * 10 years experience SYSTRA offers a range of competitive benefits including health insurance, life insurance, vacation/holidays/sick time, 401(k) with employer match, short-term/long-term disability, commuter assistance program, tuition reimbursement, and more! SYSTRA is an Equal Opportunity Employer.

An innovative robotics company is looking to add a Robotics Engineer to its growing team. This role focuses on integrating, configuring, and optimizing robotic systems for deployment in real-world environments. You'll be at the forefront of automation, working hands-on with hardware and software to ensure reliable performance and seamless operation. Key Responsibilities: Set up, test, and integrate robotic systems for customer applications Collaborate with engineering and support teams to fine-tune performance Diagnose and resolve hardware and software issues during installation and field operation Conduct validation tests to verify system performance against project specs Deliver technical support and training to end users on-site Maintain documentation and logs related to system integration and field activity Qualifications: Bachelor's degree in Robotics, Mechatronics, Engineering, or a related discipline Direct experience with robotic systems, automation platforms, or system integration Strong technical troubleshooting and analytical skills Comfortable working both independently and in fast-paced, collaborative environments Open to travel as needed for system installations and customer support If you're passionate about robotics and ready to bring automation to life, we'd love to connect with you. US Citizenship or Green Card holder required.

Control Systems Engineer Setting new standards for industrial process automation solutions in the metropolitan New York City tristate area, Control Associates, Inc. is a premier provider of process automation systems & software, valves, measurement solutions, pressure management, asset reliability and data management solutions. We are looking to hire a Control Systems Engineer to work out of our headquarters in Allendale, NJ. Established in 1933, Control Associates along with its global process automation business partner, Emerson, specializes in supporting the process control equipment and service needs of the following industries: Life Sciences, Natural Gas Distribution & Transmission, HVAC, Power, Chemical, and Downstream Hydrocarbons. Responsibilities: Assist the Engineering staff with all aspects of control system project implementation from project proposal support through to start-up and commissioning if required. Work under the direction of a project s assigned Lead Engineer as part of a project team. The Control Systems Engineer will be required to support multiple projects simultaneously. Review or develop control strategies, General Design Specifications (GDS), Detailed Design Specifications (DDS) and Functional Requirements Specifications (FRS) for customers as required. Assist the Project Administrator with project planning, scheduling, documentation, and invoicing. Assist the Control System Technicians, when necessary, with control system panel and cabinet design and staging of control systems for factory acceptance testing. Assist the Lead Engineer with developing control system graphics and database configuration. Assist Lead Engineers in developing and maintaining project documentation as required by the customer specifications. Assist Lead Engineers with control system startup and commissioning. Other responsibilities as assigned by the Engineering Manager. Normal Working Hours: Monday through Friday 8:00 AM to 5:00 PM Prerequisites: Bachelor of Science degree required, preferably in chemical, biomedical, electrical, or computer engineering, with a GPA 3.1 or above Strong computer skills including Advanced Excel, SQL, MATLAB or Minitab and MS Office tools. Any experience with either Java, C++, Python, MongoDB, OSI/PI, or Cloud technologies is highly regarded. Knowledge of or experience working in an industrial process environment is preferred. Customer facing roles Must have excellent interpersonal skills S/he must also have excellent organizational and time management skills. Please note that work visa sponsorship is not available for this role. This is a direct placement position; third party contracts are not available. This is not a remote opportunity, if not local to Allendale, NJ, relocation to NYC tristate area will be required Control Associates, Inc. offers competitive salaries that include a bonus potential. Base Salary for this role is $75,000 Excellent benefits, including multiple medical plan choices, vision, and dental insurance with coverage for both employees and dependent family members. Medical and dependent care flexible spending benefits, health savings accounts, commuter tax benefit, company paid long-term disability and life/ADD insurance plans with a buy up option. Paid time off including vacation days, holidays, and sick days Our retirement plans include a 401(k) plan (with company match) and an Employee Stock Ownership Plan (ESOP), is a company-funded benefit that provides additional retirement compensation to qualifying employees. Certification/Training, we provide both in-house and Client/System specific technical training Control Associates Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, creed, race religion, color, national origin, citizenship, disability, sex, marital status, sexual orientation, familial status, gender, ancestry, or liability for services in the U.S. Armed Forces, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment. Control Associates participates in E-Verify. Click here to view E-Verify Participant

A public transportation agency in New York is seeking an Assistant Electrical Engineer to manage and review electrical systems, ensuring reliability and safety. This role involves direct engagement with project teams, analyzing project specifications, and participating in coordination meetings. Ideal candidates will hold a relevant engineering degree, possess strong analytical skills, and communicate effectively. This position offers competitive compensation and opportunities for professional development. #J-18808-Ljbffr