Controls engineer jobs in West Haven, CT - 277 jobs

Job Description Lead Engineer - Protection and Controls (Hybrid) Lead Engineer is responsible for the development, expansion, planning, design, maintenance and operation of protection and control systems necessary for the safe and reliable operation of the transmission and distribution system. Additionally, coordinates the evaluation of system failures, and the appropriate resolutions, to provide support to operations on unplanned maintenance. Shares accountability with peers in the strategy, development, and design of the organization's Life Cycle Plan, a comprehensive L-T plan for the T&D system. Responsible for supervising, assigning, prioritizing and directing the work performed by other Engineers and staff. Location: Westwood, MA (Hybrid) Responsibilities Supervises, coaches, and develops engineers; approves time and conducts performance reviews; assigns, prioritizes and directs work performed by at least two Engineers and / or Designers Responsible for the scope and cost development, justification and approval of Life Cycle Plan activities over a multi-year horizon and for ongoing projects Review and evaluate proposed changes to existing electric facilities to ensure compatibility with established company protection system standards and practices Create new Protection and Control system designs in accordance with company Standards as required. Ensures the design and specification of additions, modifications and replacements to the transmission and distribution systems, and the preparation of system electrical permits and related customer notifications, are completed accurately and on time. Oversee or provide guidance in the development, calculation, and documentation of settings and logic for protective relays, logic processors, feeder reclosers, and switches necessary to support system reliability projects and initiatives Review and evaluate the results of coordination studies by modeling and analyzing electric system elements and their protection systems using fault simulation software Analyze protection system operations during transmission and distribution system disturbances in support of Substation Technical Group Event analysis Ensure department work is performed in adherence to applicable company or compliance engineering and design standards, safety codes and related NERC, NPCC, and ISO-NE compliance. Collaborates with other Engineers within Engineering to ensure consistency and teamwork Provides technical support and direction to operating areas relative to system priorities, engineering guidelines and operating decisions during normal and emergency situations Accountable for root-cause analysis, development and implementation of corrective actions Interface with Planning, Operations and Field personnel to support their efforts to plan, operate and maintain the transmission and distribution system Responsible for the evaluation and selection of technology and equipment for the system Responsible for the development of standards and procedures for design, operation and maintenance Manage and perform work activities in a self-sufficient manner without frequent guidance and oversight Assumes the role of the Manager as required Actively support storm and/or emergency restoration assignments Qualifications BSEE or BSEET required; MSEE, Power Systems or similar, preferred Eight years in the technical, operational, or engineering aspects of the electrical utility industry Experience performing overcurrent and distance coordination studies with ASPEN One-liner modeling software Experience performing post event analysis using relay and digital fault recorder event records Experience with the design and installation of protection and control schemes utilizing IEC 61850 protocol Prior supervisory experience preferred Company Brief: Fortune 500 diversified energy services firm (electric utility / gas utility) that has been providing energy products and services throughout the northeast United States for 100 years Lead Engineer, Protection and Controls Engineering, Electric Utility - 2447m Visit our website for more details ********************* This position is being offered through Management Recruiters of Bonita Springs, Inc., who proudly supports Affirmative Action and Equal Opportunity Employment. We are committed to workforce diversity. M/F/D/V are encouraged to apply. Key Words: BSEE power Option Electric Utility P&C Relay Protection Control transmission substation distribution T&D system protection engineer project management SCADA RTU HMI settings IEC 61850 ASPEN automation

Location: Bloomfield, Connecticut On-Site: 1 - 2 days in office Shift: 8am - 5pm Job Type: Contract Duration: 1 Year Hourly Rate: Up to $58/hour W2 Vacancies: 1 Project: Steam Power Services, Manufacturing GPE SPS-ITR Clean Combustion Lead Engineer - Controls Engineering (Windsor) LBP Role Description Job Description Summary As a member of the Process and Controls Engineering Team, you will be an active contributor to support the Clean Combustion Parts and Services business. You will be an active member of the team developing tenders and leading contract execution in a role that requires you to work cross-functionally to develop controls solutions based on customer needs as well solve complex problems across the Clean Combustion product line of utility and industrial boilers. You will work as a team player and at times as a task leader, acting with humility, transparency, focus and inclusion; analytically minded, decisive, and collaborative. Roles and Responsibilities Identify, develop, evaluate, introduce, and manage engineering solutions for product control and control system technology needs. Apply control theory and mathematical modeling to design and control systems with desired behaviors. This includes operability, setting of boundaries, cycle optimization, control logic, control related software, sensors, hardware and software algorithms, and feedback to control the performance of devices, subsystems and control systems. Work autonomously on complex tasks. Develop complete hour estimate, schedule and material lists for cost estimating from engineering selections and customer requirements. Utilizes in-depth knowledge of a technical discipline and analytical thinking and technical experience to execute business strategy. Has an understanding of National Fire Protection Association (NFPA) Codes, Burner Management Systems and Distributed Control Systems. Has knowledge of best practices and how own area integrates with others. Participate as a presenter or reviewer in technical and program reviews. Assure proper documentation of technical data generated for the assigned projects and/or tasks consistent with engineering codes, policies and procedures. Uses some judgment and has some ability to propose different solutions outside of set parameters to address more complicated manufacturing processes with technical variety and/or interdependent production cycles. Uses technical experience and analytical thinking. Uses multiple internal and limited external sources outside of own teams to arrive at decisions. Acts as a resource for colleagues with less experience. May lead small projects with low risks and resource requirements. Explains information, developing skills to bring team members to consensus around topics within field. Domestic travel to visit customer sites, Required Qualifications Bachelor's degree from an accredited university or college in Electrical Engineering or other engineering discipline with a minimum 6 years of relevant work experience. Desired Characteristics Strong oral and written communication skills. Demonstrated ability to analyze and resolve problems. Ability to document, plan, market, and execute programs. Established project management skills. Respectful, receptive, agile, eager to learn.

We are currently hiring a Protection and Control Engineer in LaBella's Program Management Services Division at our client's office. The Program Management Services Division at LaBella provides comprehensive management services for complex projects and multi-year capital programs. Project teams are established to provide a customized mix of business consulting, project management, financial control and monitoring, administrative, and technical support services. Duties: Perform detailed review of all existing protection schemes present in the subject area to incorporate into new design. Special areas of focus are anti-islanding schemes, generator intertie settings, SPS schemes, etc. (anything outside of normal). Basically, the goal is to ensure that we don't remove required protections already in place or at least be aware of how things work today before we modify existing schemes. Lead overall protection design for all capital projects and define relay protection functionality/scheme in accordance with AVANGRID TM standards Review contractor provided relay settings, logic diagrams (including Goose messaging diagrams), and operational descriptions for all capital projects Review/perform area relay coordination and determine what level of area coordination is required/needed (based on changes in fault duty and overall system performance due to the project changes) Review contractor provided relay settings for all temporary builds and construction sequence steps including mobile settings Review/provide input to Owner's Aspen model changes as required for individual capital projects Provide design support during implementation/testing and commissioning of the above the items Provide feedback to Owner on existing TM standards and help refine the Owner's design practices Ensure all as-built documentation gets filed appropriately in the plant filing location at Owner Lead overall automation and integration design for all capital projects Review/design SCADA point indexes Review contractor provided HMI screens/settings for all capital projects Review/design Protection settings and settings basis Review/design IED Data Maps Review/create substation level operational descriptions (HMI operation, relay front panel operation, etc.) Review automated maintenance data gathering (Digital Substation Data) point lists Track all required licenses/firewalls and key automation and integration deliverables needed for project implementation Provide design support during implementation/testing and commissioning of the above items Perform constructability review and ensure adequate automation and integration coverage is available for each outage step (SCADA etc.) Salary Range: $75,000 - $120,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements 2-5 years of engineering experience in the functional area Bachelor's degree in engineering or engineering technology PE requested IEC 61850/Goose experience required Benefits Body, mind, and wallet-LaBella's benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. Flexible Work Schedule Health/Dental Insurance 401k Plan with Employer Match Short & Long Term Disability Profit Sharing Paid Time Off Leadership Development Program Fitness Reimbursement Tuition Reimbursement Referral Bonus Program Wellness Program Team Building Events Community Service Events

Job DescriptionDescription: We are seeking a hands-on Automation & Controls Engineer to support, troubleshoot, and improve a wide range of manufacturing equipment in a regulated pharmaceutical environment. This role is ideal for mechanically inclined problem-solvers who enjoy being on the production floor, working directly with machines, controls, and electrical systems - not behind a desk. Job Type: Full-Time Location: Hauppauge, NY Works Hours: Monday - Friday, 8:00AM - 4:00PM Pay Range: $90,000 - $140,000 per year, depending on experience Start Date: ASAP What makes this role exciting: A true automation playground - work hands-on with a wide variety of manufacturing equipment, controls platforms, and technologies in a complex pharmaceutical environment. Real impact, real machines - you'll diagnose, fix, and improve equipment that directly supports production, quality, and reliability - not abstract or purely digital systems. High visibility & ownership - your expertise will be relied on across maintenance, engineering, and operations, with meaningful input into equipment improvements and upgrades. Constant learning & challenge - no two days look the same; you'll be exposed to diverse machinery, evolving technology, and new technical challenges. Hands-on engineering - ideal for mechanically curious problem-solvers who prefer being on the floor, working with equipment, over desk-only work. Why Join CPC? At CPC, you'll be part of a team that has set the standard in pharmaceutical development and contract manufacturing since 1971, helping bring high-quality OTC, dietary supplement, and prescription products to market faster and safer than ever. We pride ourselves on quality as a core value, innovative problem-solving, and a collaborative culture where everyone plays a role in advancing formulation and manufacturing excellence. CPC offers an inclusive, respectful workplace with opportunities to grow your skills and career while working with cutting-edge technologies and serving leading global brands. With a commitment to employee success, competitive benefits, and a culture built on teamwork and integrity, CPC is a place where your contributions truly make an impact. Requirements: Responsibilities: In this role, you will: Troubleshoot and resolve PLC, electrical, and control system issues across a wide range of manufacturing equipment to minimize downtime and improve reliability. Design, implement, and optimize machine control systems, including PLCs, HMIs, servos, and electrical components. Own automation documentation and standards, maintaining current PLC/HMI programs, electrical drawings, and equipment documentation. Collaborate closely with maintenance, engineering, and operations teams to execute repairs, improvements, change control, and equipment qualification. Mentor and guide mechanics and technicians, promoting safe work practices, strong troubleshooting skills, and first-time-right execution. Education & Experience: Bachelor's Degree in Electrical Engineering, Automation Engineering, or a related engineering discipline. Minimum 3 years of progressive experience supporting and improving automated manufacturing equipment. Skills, Knowledge & Abilities: Mechanically curious and systems-oriented thinker Comfortable working directly on equipment in a production environment Enjoys variety, challenge, and continuous learning Practical, hands-on problem solver - not purely theoretical Hands-on experience with PLC, HMI, and servo systems (Allen-Bradley, Siemens, Mitsubishi) Experience troubleshooting electrical control panels, sensors, drives, and actuators AutoCAD or similar electrical drafting experience preferred Working knowledge of OSHA and NEC requirements

This position will provide a combination of manufacturing engineering and electrical controls engineering services for new production equipment and all aspects of manufacturing to ensure that world-class products are available to our customers. This person will work independently with minimal supervision for most of the activities with a strong reliance on experience and good organizational skills. This person will act as a specialist and work with all levels of the organization. This position exists to improve efficiency, fix programming and mechanical related issues in a timely manner to reduce/ eliminate the equipment downtime. Their work affects equipment, employees, work environment and process standards and specifications. RESPONSIBILITIES Assist new products team with determining requirements and cost estimates for machines that are built in-house and by outside suppliers. Ensure compliance of the GSS, Watertown machine specification for new acquisitions and retrofits. Designs, develops, tests, sources, cost justifies, and installs various tools, devices, modifications, fixturing, machinery and equipment for production to increase safety, throughput, quality, capacity, and reliability. Manage the completion of those projects from conception through evaluation, justification, purchase, and implementation. Lead projects, create timing plans, design control systems, create schematics, order components, write programs, debug machines and provide support after launch. Coordinate with all levels of the organization to meet project timing and budget Integrate vision inspection, process monitoring, servo control, mechanical inspections, and other devices or processes into new and existing equipment. Champion innovative techniques to improve manufacturing processes. Develop, debug, and validate control systems including electrical, PLC, hydraulic, pneumatic, servo, HMI's, etc. Generate and implement standards and best practices - Logic, machine design, process, etc. Ensure that logic systems documentation is complete, up to date, stored in file structure, and available at all times. Provide general supervision to outside contractors (electrical, mechanical, PLC programming, etc.) to resolve material and/or equipment problems, research and implement upgrades, new tools and operating procedures. Work with Operators, Supervisors, Maintenance and QA department to improve processes and troubleshoot equipment repair and maintenance. Support diverse portfolio of processes and controls hardware. Ensure proper training and guidance is provided to GSS Production team. Apply Lean Mfg. / Toyota production system principles, IATF 16949, FMEA and Control plan concepts in controls engineering initiatives and tasks. Review existing logic programs to ensure safety of all associates and the processes are efficient & error proofed. Work closely with the Safety Team to ensure electrical controls and processes meet ergonomic and other safety standards. Champion continuous improvement projects to enhance safety, productivity, quality, reliability, capacity and processes. Project manage & coordinate implementation of continuous improvement actions. Ensures manufacturing practices are current, consistent, and compliant with GSS Policies and Procedures, all external state/federal regulations and customer requirements. Demonstrate a leadership mindset holding themselves and their team to high standards to ensure timely and successful project execution. Encourage working cross functionally and collaboratively. The above are principal responsibilities and do not identify all duties inherent in the job Requirements EXPERIENCE AND EDUCATION REQUIREMENTS BS Electrical, Mechatronics, Mechanical Engineering or equivalent Minimum of three years related to manufacturing experience in electrical, manufacturing, industrial engineering, or related field. COMPETENCIES - KNOWLEDGE, SKILLS AND CHARACTERISTICS/BEHAVIORS Experience in manufacturing, quality, safety and management is essential. Experience with Controls Systems including: Allen Bradley PLCs, Kinetix Motion Controls (Studio 5000 programming software), and HMIs (FactoryTalk Studio), GE PLCs (Proficy Machine Edition software), Siemens PLCs, and Robotics. Knowledge of ladder logic programming SQL, Database structure, Data collection systems. Diagnostic and troubleshooting skills. Organizational and project management skills with the ability to prioritize and self-initiate when necessary. Knowledge of tool design, gage design, and fixture design. Computer skills include demonstrated knowledge of Microsoft office. Working knowledge of plant/facilities engineering, electronics, pneumatics and engineering controls. Excellent interpersonal, communication, organizational skills, and collaborative team player. Broad-base knowledge of Lean Manufacturing, including 5s, Kaizen, Kanban, Poke-a-Yoke, Process Mapping & Value StreamMapping, other tools & Techniques Strong analytical & problem-Solving Skills (Experience of proven techniques a plus ie. Shainin, DOE, 6 Sigma, 8D, 5 Why, etc.) Continuous Improvement mindset with ability to lead and influence others. Mechatronics experience and interests Python, Visual Basic (VBA), Ignition!, IIOT, I4.0 are a plus Experience with Controls Systems including: DirectLogic PLCs (DirectSoft programming software) knowledge is a plus, FANUC, ABB, and UR Robotics is a plus, Cognex vision systems is a plus Equipment development, tooling design, gage design, CAD (NX, AutoCAD) is a strong plus ISO 14001 and IATF 16949 experience is a strong plus. Knowledge of Automotive AIAG Core tools (FMEA, Control Plan, PPAP, MSA, SPC) is a strong plus ADDITIONAL NOTES • Able to lift up to 35 pounds. • Ability and Willingness to travel internationally • Able to work in staggered or 2nd shift when necessary

K&A Engineering Consulting is a privately held company, providing comprehensive consulting, engineering and design, program/project management, construction management, and support services to power utility and industrial clients. Specializing in substation, transmission, distribution, distributed energy resources, and EPC services, we excel in solving complex challenges with precision-driven solutions. We pride ourselves on employing top talent, fostering a culture of excellence, and building meaningful relationships with clients and employees. Powered By Innovation, Passion, And Purpose. Start your K&A Career: We are seeking a highly motivated and skilled Protection & Controls Engineer to join our team at K&A Engineering in Orange, Connecticut. In this role, you will have the opportunity to work on exciting and challenging projects that make a real impact in the energy and utility sectors. You ll be part of a dynamic, people-focused team where your expertise, ideas, and contributions will be valued and celebrated. Role Expectations: Perform detailed review of all existing protection schemes present in the subject area to incorporate into new design. Special areas of focus are anti-islanding schemes, generator intertie settings, SPS schemes, etc. (anything outside of normal). Basically, the goal is to ensure that we don t remove required protections already in place or at least be aware of how things work today before we modify existing schemes. Lead overall protection design for all capital projects and define relay protection functionality/scheme in accordance with Avangrid TM standards Review contractor provided relay settings, logic diagrams (including Goose messaging diagrams), and operational descriptions for all capital projects Review/perform area relay coordination and determine what level of area coordination is required/needed (based on changes in fault duty and overall system performance due to the project changes) Review contractor provided relay settings for all temporary builds and construction sequence steps including mobile settings Review/provide input to Customer s Aspen model changes as required for individual capital projects Provide design support during implementation/testing and commissioning of the above the items Provide feedback to Customer on existing TM standards and help refine the Customer s design practices Ensure all as-built documentation gets filed appropriately in the plant filing location at Customer Lead overall automation and integration design for all capital projects Review/design SCADA point indexes Review contractor provided HMI screens/settings for all capital projects Review/design Protection settings and settings basis Review/design IED Data Maps Review/create substation level operational descriptions (HMI operation, relay front panel operation, etc.) Review automated maintenance data gathering (Digital Substation Data) point lists Track all required licenses/firewalls and key automation and integration deliverables needed for project implementation Provide design support during implementation/testing and commissioning of the above items Perform constructability review and ensure adequate automation and integration coverage is available for each outage step (SCADA etc.) What we re looking for: Bachelor s Degree in Electrical Engineering (BSEE) with a strong background and knowledge of all utilities engineering disciplines 7 years or more of relay/protection settings engineering experience Proficient in Microsoft Project, Excel, PowerPoint, and Word Proven experience in Substation Design should include general arrangement, electrical equipment plans, elevation and section views, Equipment cable trays, cable design, conduit fill calcs, rigid bus calcs Professional level skills in MicroStation, AutoCAD PE requested Pay Range $105,500 $115,000/annually Why Join K&A? People-First Culture: We put our people at the center of everything we do, creating an environment where your professional and personal growth is a top priority. Innovation & Learning: We encourage continuous learning and invest in your development through training, mentorship, and hands-on experience. Collaborative Team Environment: We believe in the power of collaboration and working together to achieve the best outcomes for our clients and employees. Recognition & Growth: We ve earned our reputation through uncompromising precision and a commitment to excellence. As an agile and fast-growing company, we offer plenty of opportunities for your career advancement and growth. Competitive Compensation & Benefits: We offer a comprehensive benefits package for eligible classified employees, including but not limited to: Medical, Dental, and Vision Insurance FSA, HSA, and Dependent Care Spending Account 401K (Traditional and Roth with Company Match) Lifestyle Spending Account (LSA) Paid Parental Leave Paid Holidays and Flexible PTO Tuition Reimbursement, Parking and Transit Reimbursement, and Pet Insurance Long-Term Disability, Short-Term Disability, and Life Insurance EAP (Employee Assistance Program) Relocation Assistance Check out our career page for more information! The salary range for this role considers a wide range of factors that are considered in making compensation decisions, including but not limited to technical ability, experience and training, licenses and certifications, and other related skillsets. The disclosed range is an estimate and has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled.

General information Organisation The HAHN Automation Group is the global solution partner for factory automation. The company stands for industry-specific know-how, an extensive project portfolio, and a global organization with a focus on providing service all from a single source. From manual stations to semi-automated cells and full production lines, 1,800 employees across 22 locations worldwide work on custom solutions. In addition, the digital product portfolio helps manufacturers gain a competitive edge by increasing efficiency and paving the way to a smart factory. Customers in the Automotive, Electronics, and MedTech industries have benefited from our expertise for more than 30 years of providing experience and international innovation. Reference 2025-1765 Functional Area Software Position description Job title Controls Engineer, Software M/F Employment type Full Time Job description PRINCIPAL DUTIES AND ACTIVITIES The principal duties will include, but are not limited to: * Provide technical leadership and expertise to the controls team, guiding them to meet project objectives, and delivering high-quality solutions to our customers * Develop, install, and troubleshoot PLC, HMI, motion control, robot, vision software solutions consistent with HAHN Automation Group US design standards and customer requirements for all assigned projects * Collaborate with Project Managers, Mechanical Design, and Electrical Design teams to understand machine function in order to develop appropriate software solutions * Identify and provide reliable solutions for technical issues to ensure complete customer satisfaction through all stages of the process * Contribute to continuous improvement of departmental processes while staying current with advancements in controls engineering and automation technology * Serve as a technical subject matter expert and offer guidance and training to the team on technical issues * Collaborate within cross-functional teams to support design decisions, answer project questions, and ensure our controls software systems support the overall process * Contribute to multi-site initiatives and discussions within the global HAHN group to further our harmonization efforts * Participate in design reviews early to best understand software requirements defined by customer specifications and proposals, and offer design guidance to the assigned programmer * Assist with the training of new employees within the software department to bring them up to speed on HAHN Automation Group US programming standards * Support Applications Engineers during the quoting process, including answering questions, estimating hours, and potentially prototyping * Support the service department by assisting customers remotely or on-site at their facilities, which could include both domestic and international travel * Collaborate with the Controls Engineering Manager to document or create standard work practices and methods for our controls team * Create and maintain programming tools and templates for the controls team to use Requirements POSITION QUALIFICATIONS AND SKILLS Education: College accreditation with emphasis in engineering or equivalent experience, preferably from within a manufacturing firm-bachelor's degree with concentration in Electrical Engineering or Computer Science strongly preferred. Experience: A minimum of 10 years of electrical design, programming, and/or engineering experience, with a preference for 5 years within the special machine industry. A minimum of 2 years of leadership experience is strongly preferred. Additional Skills: * Ability to program and provide technical leadership and mentorship to continuously improve the department's overall programming expertise of various PLC, HMI, robot, motion control, LabVIEW, and machine vision software applications * Ability to understand and follow all relevant safety policies when working on assigned equipment projects including, but not limited to: lockout/tagout, electrical safety, arc flash safety, and robotic systems safety * Strong communication and interpersonal skills * Excellent problem-solving abilities and a detail-oriented approach * Creativity and flexibility to find innovative solutions to meet our customer's technical needs and schedules * Familiarity with industry standards and regulations * Ability to evaluate quotations, specifications, and engineering drawings to identify functional requirements and develop machine control software solutions * Ability to effectively communicate project status, timelines, and milestones with various project teams and management during the design phase, while maintaining positive, patient interactions to support a successful system * Contribute to system setup and testing activities after the initial software is developed, which may require knowledge of electrical and mechanical systems, as well as collaboration with internal teams to ensure the system functions as intended * A thorough understanding of electrical hardware and software design requirements as they relate to the design of custom equipment * Ability to troubleshoot and debug complex automation systems, which may involve addressing software bugs, wiring issues, or mechanical problems * Flexibility to manage multiple projects of varying scope and complexity, across different teams and customers, in an environment where priorities are constantly changing * Demonstrate a self-motivated, goal-oriented attitude with the ability to initiate and implement tasks, strategies, and techniques that enhance productivity and profitability for the company * Prioritize a strong, customer-focused, team-based approach to problem-solving * A commitment to integrity, ethical and economic practices, and alignment with the organization's mission * Flexibility to work additional hours as needed to meet project requirements with the potential for overtime/weekend hours Benefits Medical Insurance Dental Insurance Vision Insurance Life, Short-term, and Long-term Disability Insurance Vacation and Sick Leave 401K Position location Job location USA, Hebron, US

Controls Engineer position responsible for performing a variety of mechanical and electrical engineering functions. The role supports the design and application of all pumping controls-related accessories, involving engineering duties such as calculations, CAD drafting, testing, and other technical functions. Responsibilities * Perform calculations and CAD drafting for design purposes. * Support the design and application of pumping controls accessories. * Design control panels including layout and general arrangements. * Work with analog sensors and provide sales support. * Engage in continuous process improvement. * Program PLCs for effective control systems. * Document processes effectively. * Conduct testing and other technical functions. Essential Skills * Proficiency in AutoCAD for plan changes. * Understanding of UL 508 certification requirements. * Experience in control panel design and analog sensors. * Bachelor's degree in mechanical, electrical, or similar engineering discipline, or an associate degree in electrical engineering with 3 years' experience, or 10 years' experience as an Electrical Controls Designer. * Three to five years of experience in a technical manufacturing or similar environment. * Proficiency in mechanical and electrical component design and application. Additional Skills & Qualifications * Familiarity with centrifugal pumps is a plus. * Ability to use MS Outlook, MS Word, and MS Excel. * Productivity with minimal supervision. * Quick learning capability and ability to advance skills. * Strong attention to detail. * Good communication and teamwork skills. Work Environment This role requires working onsite with 10%-15% travel to customers. The work involves using various software tools and participating in a collaborative team environment. Job Type & Location This is a Permanent position based out of Old Saybrook, CT. Pay and Benefits The pay range for this position is $70000.00 - $110000.00/yr. medical, dental, vision, 401k, PTO Workplace Type This is a fully onsite position in Old Saybrook,CT. Application Deadline This position is anticipated to close on Jan 26, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Job Type: Full-Time, On-Site Reports to: Vice President of Engineering Salary: $75,000 to $115,000 or more based on experience About TEC: TEC Building Systems LLC, founded in 1981, is a leading provider of custom-designed building automation control solutions in the New York City area. We specialize in engineering, commissioning, maintenance, and retrofit services for a wide range of clients. Our team is known for its innovative approach, adaptability, and commitment to excellence. More at: tecsystemsnyc.com. Control System Design Engineers are responsible for managing the design phase of projects, creating highly functional, cost-effective control system designs that comply with project plans and specifications. The design phase includes: Reviewing contract plans, specifications, proposals, and budgets Developing design project delivery schedule Designing DDC control panels, wring schematics, and system interfaces to control building mechanical, electrical and plumbing systems. Selecting control system products and developing project bill of materials Documenting system sequence of operations and operating parameters Designing BMS communication networks. Developing electrical installation wiring diagrams and scopes of work. 3+ years of experience. A design engineer works independently on small scale control system designs, or as part of a team on large scale projects. Candidate must demonstrate an understanding of all control system basics , electrical and electronic circuits and systems, contract document review, and possess exceptional organizational and communications skills. Required skills: Knowledgeable in building mechanical, electrical, and plumbing (MEP) systems. Able to read and understand architectural, mechanical, electrical, fire protection, and communication systems contract drawings and specifications. Proficient in AutoCAD, Bluebeam, and Microsoft Office suite Excellent oral and written communication skills Able to work on multiple projects and varying project teams. Degree in electrical or mechanical engineering preferred

Company: Bexorg (Bexorg.com) Bexorg is a TechBio company pioneering a completely new way to understand and treat neurodegenerative diseases such as Alzheimer's and Parkinson's. Building on the landmark 2019 Nature paper by Zvonimir Vrselja and Nenad Sestan demonstrating that mammalian brain cellular functions can be partially restored hours after death, Bexorg uses donated, intact human brains to develop transformative therapeutics for the most challenging diseases affecting humanity. Headquartered in New Haven, CT, Bexorg has raised $42M to date and is already generating substantial revenue through collaborations with leading biopharma companies. The Role We are seeking a Principal Robotics Engineer to architect, build, and own the robotics backbone of Bexorg's automated experimental platforms. You will be responsible for: Automating our perfusion rigs so they operate robustly and autonomously with minimal technical supervision. Designing and implementing a high-throughput brain slice incubation platform that integrates robotics, fluidics, and advanced control systems. This is a hands-on, senior technical leadership role for someone who wants to build systems that have never existed before, in close collaboration with surgeons, perfusion technicians, software engineers, and drug discovery scientists. What You'll Do System Architecture & Design Own the end-to-end design of robotic systems for perfusion rigs and brain slice incubation platforms, from concept through deployment. Specify and integrate robots (e.g., KUKA AGILUS or similar class of arms) with complex artificial circulatory and dialysis systems. Architect fluid-handling and sample-handling subsystems, including pumps, valves, reservoirs, and manifolds for precise control of: Systolic pressure and flow profiles Temperature and gas exchange Dosing concentrations and timing Automation & Control Develop robust automation for the full experimental workflow: setup, calibration, operation, monitoring, fault detection, and safe shutdown. Implement and maintain ROS-2-based software to coordinate robots, sensors, pumps, valves, and supervisory control. Build state machines, safety interlocks, and real-time monitoring to ensure system reliability and reproducibility in a wet-lab environment. Collaborate with software engineers to integrate robotics systems with higher-level orchestration, data acquisition, and LIMS/ELN tools. Execution & Ownership Rapidly prototype, test, and iterate on mechanical, electrical, and control designs to reach production-grade reliability. Define and refine acceptance tests, performance metrics, and validation protocols for automated systems. Drive root-cause analysis and systematic debugging of mechanical, electrical, and software issues in deployed systems. Leadership & Collaboration Serve as the senior technical authority on robotics within Bexorg, setting best practices and technical standards. Mentor and guide junior engineers and technicians in robotics, controls, and automation. Work cross-functionally with surgeons, perfusion specialists, and biologists to translate experimental needs into robust, scalable robotic solutions. Communicate clearly with both technical and non-technical stakeholders, including collaborators at major biopharma companies. Requirements Extensive hands-on experience designing, building, and deploying robotic systems in production or mission-critical environments. Demonstrated track record of leading complex robotics projects end-to-end, from requirements gathering through commissioning and support. Strong expertise in several of the following areas: Industrial robotic arms (e.g., KUKA, FANUC, ABB, UR, Kawasaki); KUKA AGILUS or similar a plus Motion planning, calibration, and safety for industrial robots Mechatronics: integrating sensors, actuators, pumps, valves, and control electronics Real-time control and supervisory systems for complex hardware Robotics software frameworks; ROS-2 experience strongly preferred Ability to thrive in a hands-on environment: comfortable working around wet-lab equipment, plumbing, fluidics, and hardware bring-up. Excellent communication skills and demonstrated experience mentoring and leading junior engineers. Proven ability to operate as an aggressive self-starter: you take ownership, move quickly, and drive projects forward with minimal supervision. Bachelor's degree in Robotics, Mechanical Engineering, Electrical Engineering, Controls, or a related field, or equivalent industry experience with a strong track record of impact. Nice to Have Experience in biopharma, biotech, or medical devices, especially with automated lab or screening systems. Prior work with high-throughput or continuous operation systems that must run reliably for long durations. Experience with: Fluid-handling automation or lab automation platforms Closed-loop control of pressure, flow, temperature, and dosing GMP/GxP or other regulated environments Advanced degree (MS or PhD) in a relevant field. Why Bexorg Work on truly unique, first-of-its-kind systems at the intersection of robotics, neuroscience, and drug discovery. Directly contribute to platforms that could fundamentally change how we treat neurodegenerative diseases. Collaborate with world-class scientists, engineers, and clinicians in a fast-moving, well-funded startup environment. On-site, hardware-focused work in New Haven, CT, with direct access to the systems you design and build. If you're excited to build ambitious robotics systems that could transform brain research and therapeutics, we'd love to hear from you.

As a child, did you ever dream of building robots? We did. At Dexory, we build, deploy, and operate autonomous robots that transform logistics and warehouse operations. In just six months, we went from the first CAD model to a deployed robot at a customer site in May 2023. Two years later, we've built and deployed over 150 robots, grown from a team of 10 to more than 250 people, and continue to scale at startup speed. Our ambition now is to scale our robotics and autonomy stack to hundreds, soon thousands, of robots operating in dynamic, real-world environments. As a Robotics Engineer at Dexory, you'll help us make that possible: designing systems that can be deployed every two weeks to our global fleet, with zero manual customisation. The challenge is immense: how do you build a scalable, reliable robotics core that powers a rapidly growing Robot-as-a-Service platform? If solving that at speed excites you, you'll feel right at home here. When you apply, provide a few sentences why you think you're the right person for this role. *We value the right attitude, humility and we're as interested in your character as we are in your talent. Please apply, even if you feel you only meet part of our listed criteria. Diversity drives innovation and we offer an international and friendly work environment with an energetic company culture. What does this role involve? Developing and maintaining autonomy software for real-world robotic systems Working with ROS 2, using modern C++ (17/20), and Python Integrating perception, planning, and control modules Collaborating with deployment teams to support complex field operations Occasionally travel for hands-on deployment support Working onsite with our robotics team in Oxford Verda Requirements: Proven track record in industry or strong academic background Evidence of past work: open-source contributions, competition results, or deployed systems Solid experience with ROS 2, C++, and Python Familiarity with Linux, Git, CI/CD, and containerisation Willingness to travel for hands-on deployment (when needed) Strong communication and collaboration skills Strong Advantage If You Have Expertise in LiDAR sensor integration Expertise in design robotic software at scale Experience with LiDAR-based SLAM, segmentation, or other perception pipelines Contributions to open-source robotics projects Participation in competitions like RoboCup, Formula Student AI, or DARPA challenges Benefits Starting from the interview process and continuing into your career with us, you will be working by our four Operating Principles: Performance: High standards, outstanding results, Impact: Big challenges, bigger results Commitment: All in, every time One team: One mission, shared success Joining our team and company isn't just about expertise; it's about embracing uncertainty with ambition. We're crafting world-changing solutions, fueled by a passion to redefine what's possible. We will look for you to help create and shape the future of logistics solutions through our products, our culture and our shared vision. You will also receive: Private healthcare via Bupa with 24/7 medical helpline Life insurance Income protection Pension: 4+% employee with option to opt into salary exchange, 5% employer Employee Assistance Programme - mental wellbeing, financial and legal advice/support 25 holidays per year Full meals onsite in Wallingford Fun team events on and offsite, snacks of all kinds in the office AAP/EEO Statement Dexory provides equal employment opportunities to all employees and applicants for employment. It prohibits discrimination and harassment of any type without regard to race, colour, religion, age, sex, national origin, disability status, genetics, protected veteran status, or any other characteristic protected by local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training Please note: We are unable to provide sponsorship or relocation for this role.

FIELD ELECTRICAL ENGINEER I Summary Design and development of paper converting and automation machinery. Responsible for the design, development, and documentation associated with the project electrical systems. This includes the control system electronics hardware, electro-mechanical interfaces, compliance to machine specifications, and compliance to applicable electrical codes and standards. Must be able to solve machine control problems by applying knowledge of electrical engineering principles to accomplish technical assignments. Essential Duties & Responsibilities Works as a collaborative electrical engineering team member applying electrical engineering principles to develop design solutions for electromechanical machine control. Basic understanding of embedded controllers, embedded software, and PLCs for automated machines. Basic understanding of embedded controllers, embedded software (C, C++ languages). Confirms electrical systems and component's capabilities and quality by designing testing plans. Prepares engineering reports, calculations and checks drawings for completeness and accuracy. Interacts with vendors, suppliers, to select electrical components/subassemblies that comply with machine requirements and specifications. Trouble shooting equipment as required in house and at customer facilities. Develop operation manuals and other pertinent documentation. Responsible for design and concept and layout using Solid works Electrical and AutoCAD. Support prototype builds and releases products into production. Assists with the design, development, testing and reports for new product development (NPD) projects. Participates in design projects, customized products, existing product maintenance, quality improvements and cost reduction. Qualifications Bachelor's degree in Electrical Engineering or Electrical Engineering Technology or Controls/Mechatronics Minimum of 2 years of related electrical engineering experience PLC programming experience is a plus (Mitsubishi, Siemens, Allen-Bradley, Beckhoff, etc.) Software programming is a plus (C, C++, Structured text) PCB layout experience is a plus. Altium software preferred. Working knowledge of electrical systems, electrical troubleshooting, and electrical design Familiarity with design and application of various sensor technologies Familiarity with user interface technology, HMIs such as touch-screen displays Self-motivated and innovative, yet an exceptional product development team player Strong communication and problem solving skills CAD experience is required. Willing to travel up to 40% of the time (international and domestic)

Full-time Description North Atlantic Industries is a leading provider of embedded electronic solutions, specializing in rugged embedded computing, power supplies and motion simulation and measurement technologies. Our products and services are used by the military, aerospace, and industrial markets, helping to advance technology and protect the free world. NAI was proud to be recognized as a Top Workplace on Long Island by Newsday! Our culture is very collaborative. We have team building events, company picnics, special event day and employee game room. Please visit our website at ******************** to see more about what makes us a unique place to work. Summary: As an Electrical Engineer specializing in Mixed-Signal and FPGA Systems, you are responsible for the end-to-end design, development, and integration of rugged embedded hardware products within NAI's Configurable Open Systems Architecture (COSA) platform. Your work directly supports mission-critical aerospace, defense, and industrial applications by delivering robust, deterministic solutions that bridge analog and digital domains. This role offers a technical career growth path with the opportunity to advance into a Principal Design Engineer position. Engineers who excel in this role often take on ownership of COSA product families, contribute to system-level architectural decisions, and play a key role in early-stage R&D. It's an ideal fit for those who thrive on solving complex hardware challenges and want to deepen their impact through technical expertise. Requirements Design and review schematics for embedded mixed-signal circuit boards used in rugged, high-reliability environments. Own product-level power architectures, including power sequencing, current budgeting, protection circuitry, and thermal design. Develop and debug analog, discrete, and high-speed differential interfaces (e.g., ADCs, signal conditioning, RS-422/485, Ethernet, video). Implement VHDL-based control logic to manage hardware behavior with deterministic timing and precision. Conduct board-level hardware bring-up and validation using lab equipment (oscilloscopes, logic analyzers, function generators). Collaborate cross-functionally with engineers in motor control, power electronics, signal processing, and embedded systems. Support new product introduction (NPI) efforts for COSA platforms through early-stage R&D and system integration. Participate in peer design reviews and ensure compliance with NAI's quality, safety, and environmental standards. Candidates must be a U.S. Person, defined as either a U.S. citizen or a lawful permanent resident (Green Card holder), and must be able to provide appropriate documentation upon hire to verify this status. Please note that some positions involve sensitive customer contracts and require U.S. citizenship as a condition of employment. Qualifications and Education requirements: Bachelor's Degree in Electrical Engineering or related field (Master's preferred). 3-7 years of experience in mixed-signal hardware development for embedded systems. Proficient in schematic capture and PCB design tools (OrCAD or equivalent). Hands-on experience with FPGA development using VHDL in real-time control systems. Solid understanding of analog and digital signal interfacing techniques. Experience designing and analyzing power systems including regulators and sequencing. · Capable of hands-on hardware bring-up, troubleshooting, and validation in a lab environment. · Familiarity with simulation and design tools such as Vivado and LTSpice. Preferred Skills and Abilities: Background in designing systems for aerospace, military, or industrial environments. Prior experience with motor drives, power supplies, or rugged instrumentation. Knowledge of deterministic system design and hard real-time control. Ability to work independently and drive technical ownership from concept through production. Strong analytical and problem-solving skills, with attention to detail in signal behavior and timing. North Atlantic Industries offers comprehensive and competitive packages including: Benefits Medical, Dental, and Vision Insurance Company-provided Life and AD&D Insurance Voluntary Supplemental Life Insurance Long-term Disability Insurance Flexible Spending Accounts (FSA) Employee Assistance Program (EAP) 401(K) with company matching contributions Vacation, holidays, sick Employee tuition reimbursement Annual bonus eligibility Opportunities for learning and career development Work Schedule and Environment Monday to Friday, Day Shift Discretionary 9/80 Schedule Business casual dress code North Atlantic Industries (NAI) is proud to be an Equal Opportunity Employer and is committed to providing equal employment opportunity for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to any legally protected status. If you are an individual with a disability or a disabled veteran and require a reasonable accommodation in applying for any posted position, please contact Human Resources at ************ or by email at ***********. As a federal government contractor, in accordance with applicable laws, regulations, and Executive Orders, North Atlantic Industries (NAI) is required to develop annual Affirmative Action Plans for Protected Veterans and Individuals with Disabilities. Any employees or applicants who wish to review the Affirmative Action Plan for Protected Veterans and Individuals with Disabilities can contact us by sending an email to *********** or by calling ************. Salary Description $80,000 - $140,000 per year

If you are looking for a rewarding and challenging opportunity to use your experience to support the U.S. Submarine Force, then Sonalysts, Inc. has the job for you. Sonalysts, Inc. is seeking a Robotic Autonomous Systems Engineer to support the expanding integration of unmanned systems into undersea warfighting. This position would suport unmanned systems operations at the Undersea Warfighting Development Center (UWDC) in Groton, CT. The successful candidate will be a key contributor to the development of innovative analysis and research projects that will expand the capabilities of the Submarine Force and the Navy at large. What You Will Be Doing: Lead interesting and challenging analysis and research projects supporting current submarine operations. Leverage previous tactical and operational experience to analyze world-wide submarine operations using innovative data analysis tools to provide feedback, lessons learned, and data trends. Directly and positively impact submarine operations, naval warfare planning, tactics, advanced technologies, and training using analytical and problem-solving skills as part of the UWDC Team. Apply knowledge and experience as a submariner to a wide variety of additional projects and initiatives. What's In It for You? Integral part of a highly motived and expert team that provides important operational analysis and feedback to the Navy and Submarine Force leadership. Intellectually challenging opportunities to grow your skills as technologies advance and operations evolve. Advancement pathways to lead independent projects and teams. A rewarding experience that uses your expertise to make a difference while expanding your knowledge and capabilities. Opportunity to work on a critical, long-lasting submarine focused project that interacts with experts within Department of Defense (DOD) organizations across the globe. Becoming an integral part of an innovative employee-owned company which includes: Flexible Time Program enabling an optimal work-life balance by permitting partners to arrange their work around personal appointments, parent-teacher conferences, children's activities and the like, so long as the partner gets the job done on-time. Paid Time Off 401(k) Plan with company match Employee Stock Ownership Plan (ESOP) Sales Bonus Program Special Performance and Retention Bonus Program Health and Preventive Dental Insurance Dependent Care Assistance Plan Health Care Reimbursement Plan Employee Referral Bonus Program Professional Development through Tuition Reimbursement Program, Online Training Program and Targeted Skills Program Relocation Assistance Salary ranges between $125,000-$150,000, dependent on experience, qualifications, and other relevant business criteria. Required Qualifications: 2 years of operational experience with subsea robotics (AUV/UUV or ROV) and undersea warfare (torpedoes or mine hunting) including post-mission analysis 3 years design and prototyping experience Strong verbal and written communication skills Bachelor's degree in engineering or mathematics or related technical discipline; 4 years of experience with UUV analysis or operations can be substituted for degree. Must be a U.S. citizen, possessing a U.S Department of Defense (DoD) SECRET security clearance and eligible for a TOP SECRET/SCI security clearance* Desired Qualifications: Experience appling research principles to engineering design efforts Participation in field deployments, data collection and system testing necessary to determine operational readiness and safety Autonomy algorithm development or testing in both HIL/SIL and test environments supporting military applications Artificial Intelligence (AI) or related experience in the application of robotics, autonomy, or machine learning algorithms. Extensive knowledge of undersea system sensor/payload integration Experience in Python or other programming languages Expertise in submarine tactics or tactical system employment Who are we: Sonalysts, Inc. is a small, 100% employee owned business which supports a very diverse set of customers with contracts supporting the Navy, Air Force, Army, and many others. Sonalysts relies on the skills and knowledge of its diverse and capable workforce of employee-owners to help solve the DoD's most challenging problems while providing the best benefit to our customers. Sonalysts is an agile and entrepreneurial company, enabling partners to provide innovative solutions to customer requests, encouraging imagination and determination. We provide opportunities for our employee-owners to both lead and support existing projects and to get involved with developing new business and research opportunities. Sonalysts does this by utilizing a small corporate structure coupled with a largely de-centralized approach to project management. Sonalysts is the place for you if you are looking for a way to use your technical and operational knowledge to solve challenging problems while being afforded the flexibility and empowerment of being a future leader in a small business. *Maintaining a U.S. Government security clearance involves periodic comprehensive background checks. Candidates are eligible for a clearance if they have demonstrated sound financial management (including good credit) over time, are free of criminal records, have limited foreign contacts or ties, and other factors indicative of a position of trust to protect information sensitive to the U.S. Government. Sonalysts, Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to and will not be discriminated against on the basis of, race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, disability, or other basis protected by law. Drug Testing Employer *****************

Global Steering Systems, LLC (“GSS”) a subsidiary of Neapco, is a high-volume global manufacturer of automotive components, primarily steering columns. We supply our products to the world's leading auto manufacturers. We are a global company with international manufacturing facilities located in China, Poland and have over 300 employees working in our 180,000-square foot Watertown location. Our global business is built on a solid foundation of commitment not only to each other and our customers, but also to our core values of safety, performance, sustainability, and responsibility. This position will provide a combination of manufacturing engineering and electrical controls engineering services for new production equipment and all aspects of manufacturing to ensure that world-class products are available to our customers. This person will work independently with minimal supervision for most of the activities with a strong reliance on experience and good organizational skills. This person will act as a specialist and work with all levels of the organization. This position exists to improve efficiency, fix programming and mechanical related issues in a timely manner to reduce/ eliminate the equipment downtime. Their work affects equipment, employees, work environment and process standards and specifications. Responsibilities Assist new products team with determining requirements and cost estimates for machines that are built in-house and by outside suppliers. Ensure compliance of the GSS, Watertown machine specification for new acquisitions and retrofits. Designs, develops, tests, sources, cost justifies, and installs various tools, devices, modifications, fixturing, machinery and equipment for production to increase safety, throughput, quality, capacity, and reliability. Manage the completion of those projects from conception through evaluation, justification, purchase, and implementation. Lead projects, create timing plans, design control systems, create schematics, order components, write programs, debug machines and provide support after launch. Coordinate with all levels of the organization to meet project timing and budget Integrate vision inspection, process monitoring, servo control, mechanical inspections, and other devices or processes into new and existing equipment. Champion innovative techniques to improve manufacturing processes. Develop, debug, and validate control systems including electrical, PLC, hydraulic, pneumatic, servo, HMI's, etc. Generate and implement standards and best practices - Logic, machine design, process, etc. Ensure that logic systems documentation is complete, up to date, stored in file structure, and available at all times. Provide general supervision to outside contractors (electrical, mechanical, PLC programming, etc.) to resolve material and/or equipment problems, research and implement upgrades, new tools and operating procedures. Work with Operators, Supervisors, Maintenance and QA department to improve processes and troubleshoot equipment repair and maintenance. Support diverse portfolio of processes and controls hardware. Ensure proper training and guidance is provided to GSS Production team. Apply Lean Mfg. / Toyota production system principles, IATF 16949, FMEA and Control plan concepts in controls engineering initiatives and tasks. Review existing logic programs to ensure safety of all associates and the processes are efficient & error proofed. Work closely with the Safety Team to ensure electrical controls and processes meet ergonomic and other safety standards. Champion continuous improvement projects to enhance safety, productivity, quality, reliability, capacity and processes. Project manage & coordinate implementation of continuous improvement actions. Ensures manufacturing practices are current, consistent, and compliant with GSS Policies and Procedures, all external state/federal regulations and customer requirements. Demonstrate a leadership mindset holding themselves and their team to high standards to ensure timely and successful project execution. Encourage working cross functionally and collaboratively. The above are principal responsibilities and do not identify all duties inherent in the job. Experience and Education Requirements BS Electrical, Mechatronics, Mechanical Engineering or equivalent Minimum of three years related to manufacturing experience in electrical, manufacturing, industrial engineering, or related field Competencies - Knowledge, skills and characteristics/behavior s Experience in manufacturing, quality, safety and management is essential. Experience with Controls Systems including: Allen Bradley PLCs, Kinetix Motion Controls (Studio 5000 programming software), and HMIs (FactoryTalk Studio) GE PLCs (Proficy Machine Edition software) Siemens PLCs Robotics Knowledge of ladder logic programming SQL, Database structure, Data collection systems. Diagnostic and troubleshooting skills. Organizational and project management skills with the ability to prioritize and self-initiate when necessary. Knowledge of tool design, gage design, and fixture design. Computer skills include demonstrated knowledge of Microsoft office. Working knowledge of plant/facilities engineering, electronics, pneumatics and engineering controls. Excellent interpersonal, communication, organizational skills, and collaborative team player. Broad-base knowledge of Lean Manufacturing, including 5s, Kaizen, Kanban, Poke-a-Yoke, Process Mapping & Value Stream Mapping, other tools & Techniques Strong analytical & problem-Solving Skills (Experience of proven techniques a plus ie. Shainin, DOE, 6 Sigma, 8D, 5 Why, etc.) Continuous Improvement mindset with ability to lead and influence others. Mechatronics experience and interests Python, Visual Basic (VBA), Ignition!, IIOT, I4.0 are a plus Experience with Controls Systems including: DirectLogic PLCs (DirectSoft programming software) knowledge is a plus FANUC, ABB, and UR Robotics is a plus Cognex vision systems is a plus Equipment development, tooling design, gage design, CAD (NX, AutoCAD) is a strong plus ISO 14001 and IATF 16949 experience is a strong plus. Knowledge of Automotive AIAG Core tools (FMEA, Control Plan, PPAP, MSA, SPC) is a strong plus. Additional Notes Able to lift up to 35 pounds. Ability and Willingness to travel internationally Able to work in staggered or 2nd shift when necessary Relocation assistance not provided Applicants must be authorized to work in the United States/unable to provide visa sponsorship currently

About Us LiquidPiston is revolutionizing propulsion with our ultra-efficient, compact rotary X-Engine platform. Our engines deliver unmatched power density and fuel efficiency, making them ideal for next-generation aerospace applications including UAVs, eVTOL, hybrid-electric propulsion, and advanced defense systems. As we rapidly scale our aerospace-focused programs, we are building a world-class team to deliver flight-ready propulsion solutions. Role Overview The Electrical Engineer - UAV Avionics & Power Systems will own the design, development, and integration of all electrical and electronic systems for LiquidPiston-powered aerial platforms. This hands-on role combines power electronics, avionics integration, embedded controls, and aerospace-grade reliability engineering. You will work side-by-side with propulsion, airframe, and flight-control teams to deliver certifiable, high-performance electrical architectures that enable longer endurance, heavier payloads, and mission-critical reliability. Key Responsibilities Design and integrate engine control units (ECUs), power distribution, and avionics Interfaces for hybrid-electric and conventional UAV propulsion systems Design and develop the electronic control system architecture for of UAV propulsion and flight control systems Integrate and configure flight controllers and engine control units with onboard avionics, sensors, and communication modules Develop and implement embedded software/firmware for control, safety, and telemetry functions Apply systems engineering principles to ensure seamless integration of electronics, software, and mechanical components Support testing, debugging, and validation of integrated electromechanical UAV systems Collaborate with internal teams and external partners to meet system-level performance and reliability goals Document system design, software and hardware interfaces, and integration processes Qualifications Master's degree in Electrical Engineering, Computer Science/ Engineering, or a related field related field Must be a US person 5+ years of experience in aerospace electrical/electronics design (UAV, eVTOL, general aviation, or defense programs strongly preferred) Proven track record designing flight-critical or safety-critical electronics (redundancy, voting, dissimilar systems a plus) Expertise with electromechanical systems, sensors, communication protocols (CAN, UART, SPI, MAVLink, I2C), and PCB design Familiarity with model-based design tools (MATLAB/Simulink Embedded Coder) and HIL testing a strong plus Demonstrated ability to take electronics from concept through flight-test and into production or certification Self-starter who thrives in a fast-moving, resource-constrained environment typical of aerospace startups Benefits & Perks Flexible PTO: We value work-life balance and encourage time to rest and recharge. Health & Wellness: Comprehensive medical, dental, and vision coverage-you choose what works best for you. Equity Participation: Permanent employees receive RSUs (Restricted Stock Units). 401(k) Match: We offer a 401k w/100% matching up to 3% of your salary and then 50% of contributions between 3-5% Career Growth: Ongoing training, mentorship, and learning opportunities to accelerate your growth. Our Culture At LiquidPiston, we embrace challenges, move fast, and celebrate curiosity. Our team thrives on collaboration, creativity, and perseverance. We understand that innovation involves risk-and we're not afraid to fail as we move forward. Equal Opportunity Employer LiquidPiston, Inc. is proud to be an Equal Opportunity Employer. Qualified applicants will not be discriminated against, and receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, or protected veteran status or disability. All offers of employment at LiquidPiston are contingent upon successful completion of a pre-employment background check and drug screening.

As a Control Systems Engineer you will generate controls designs and write control programs for machinery built by AGR. This position requires coordination with Engineers, Project Managers, Customers and Vendors. You will be expected to use a high level of judgment and experience to make robust, effective equipment. Work to be performed at the lowest cost consistent with quality standards, design requirements and completion schedules. You will: Design controls for world-class quality industrial machinery. Be responsible for overall control system concept and design along with project deployment responsibility while working with designers, drafts people and technicians within the electrical department. Create Bills of Material. Be part of a collaborative and cooperative design team Have opportunity to act as project lead while also working in a supporting engineering and programming role as part of a larger team, often simultaneously on different projects. Produce automation system programs such as PLC, HMI, , Robotics etc. Work closely with the AGR and customer project teams throughout the build process for a high level of productive collaboration. Work in concert with the AGR Quality System and ISO procedures. Assure that Quality Policy and ISO procedures are followed. Demonstrate the application of acquired knowledge from Lean training. You should know and have experience with: Requirements Electrical systems and codes Advanced computer knowledge Vision System programming and interface Robot system design, programming and implementation Pneumatic systems design and implementation Overall control system hardware design, specification and implementation Rockwell Automation PLC and motion control platforms High level languages (Visual Basic, C#, etc.) IT and OT networking SQL based plant floor data gathering systems An overarching knowledge of Industry 4.0/ Smart Manufacturing principles as it relates to control systems interface and implementation. CAD drawing experience using AutoCAD Electrical and/or Solid Works Electrical How to read, analyze, and interpret technical procedures or governmental regulations Writing reports, business correspondence and procedure manuals How to effectively present information and respond to questions from groups of managers, co-workers, customers and vendors. How to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. How to critically think. Required Education and Experience A bachelor's degree required and 7-10+ years' experience as a Controls Engineer preferred. While possessing the stated degree is preferred, AGR also may consider applicants who hold some combination of coursework and experience, or who have extensive related professional experience.

A leading defense technology company in Danbury seeks a Senior Principal Electrical Engineer to lead the design of electronic systems for commercial and military applications. This role involves driving technical efforts, mentoring junior engineers, and contributing to innovative and sustainable solutions. Candidates should have extensive experience in electronic design, strong communication skills, and familiarity with regulatory standards. Comprehensive benefits, competitive salaries, and flexible work schedules are offered. #J-18808-Ljbffr

Job Description As a Control Systems Engineer you will generate controls designs and write control programs for machinery built by AGR. This position requires coordination with Engineers, Project Managers, Customers and Vendors. You will be expected to use a high level of judgment and experience to make robust, effective equipment. Work to be performed at the lowest cost consistent with quality standards, design requirements and completion schedules. You will: Design controls for world-class quality industrial machinery. Be responsible for overall control system concept and design along with project deployment responsibility while working with designers, drafts people and technicians within the electrical department. Create Bills of Material. Be part of a collaborative and cooperative design team Have opportunity to act as project lead while also working in a supporting engineering and programming role as part of a larger team, often simultaneously on different projects. Produce automation system programs such as PLC, HMI, , Robotics etc. Work closely with the AGR and customer project teams throughout the build process for a high level of productive collaboration. Work in concert with the AGR Quality System and ISO procedures. Assure that Quality Policy and ISO procedures are followed. Demonstrate the application of acquired knowledge from Lean training. You should know and have experience with: Requirements Electrical systems and codes Advanced computer knowledge Vision System programming and interface Robot system design, programming and implementation Pneumatic systems design and implementation Overall control system hardware design, specification and implementation Rockwell Automation PLC and motion control platforms High level languages (Visual Basic, C#, etc.) IT and OT networking SQL based plant floor data gathering systems An overarching knowledge of Industry 4.0/ Smart Manufacturing principles as it relates to control systems interface and implementation. CAD drawing experience using AutoCAD Electrical and/or Solid Works Electrical How to read, analyze, and interpret technical procedures or governmental regulations Writing reports, business correspondence and procedure manuals How to effectively present information and respond to questions from groups of managers, co-workers, customers and vendors. How to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. How to critically think. Required Education and Experience A bachelor's degree required and 7-10+ years' experience as a Controls Engineer preferred. While possessing the stated degree is preferred, AGR also may consider applicants who hold some combination of coursework and experience, or who have extensive related professional experience.