Controls technician jobs in Lovington, NM - 4,149 jobs

Technician, Engineer, 1st Shift, Weekend, Shift, Restaurant, Manufacturing

BAS Technician - DDC Controls Salary: Up to $108,000/year (DOE) Vehicle: Company-provided Ford Ranger Employment Type: Full-Time About the Role We are looking for an experienced BAS Technician to install, service, and maintain DDC building automation systems. The ideal candidate will have hands-on experience with Siemens or Distech controls and strong HVAC knowledge. This role involves fieldwork, troubleshooting, and optimizing building systems. Responsibilities Install, program, and maintain DDC BAS systems Troubleshoot and resolve control, network, and device issues Work with Siemens and/or Distech platforms Read and interpret control drawings and sequences Optimize control strategies for HVAC equipment (AHUs, VAVs, chillers, boilers) Maintain documentation and service reports Support preventive maintenance and system upgrades Requirements 3+ years as a BAS/Controls Technician Experience with Siemens or Distech DDC controls Strong HVAC and control system knowledge Electrical troubleshooting and low-voltage controls experience Valid driver's license and ability to work independently

For our state-of-the art 600+ person Lubbock, TX cheese and whey manufacturing facility, Leprino is seeking a Controls Technician. Leprino Foods broke ground on the $1 billion facility in the summer of 2022. The plant will become operational in 2025 with Phase 1 and will become fully operational by 2026! This position pays $39 per hour. There is an additional $1 differential for hours worked between 6pm and 6am. Weekly pay. Summary Description: The Industrial Electrical/Controls Technician provides plant-wide support for the selection, installation, programming, documentation, training and knowledge of plant industrial controls, including computer integration of PLC's, HMI's and process controls within the facility, training of end users on the operations of newly installed or modified process or control systems, and for standardization of control systems and control logic designs, documentation of operational procedures and as-built electrical drawings and logic. The Industrial electrical/Controls Technician is also the plant liaison for new system start up and commissioning by outside electrical and controls contractors and system integrators to ensure proper transfer of electrical red lines or updated electrical drawings and documented PLC programs changes and adequate training on the installation/changes that have been completed. The ICT is also responsible to keep control panels up to date and help rebuild when needed. The Electrical portion includes, designing, implementing electrical changes or additions to the electrical infrastructure. It is also the objective to oversee the contracted work to assure it is designed and installed per LFC guidelines. This position is also responsible to update the systems I/O list and create them if missing from the Document library. Job Duties (Accountability Categories and Essential Functions/Key Responsibilities): NOTE: The job may include other “non-essential” responsibilities and duties that are not listed on this form. Implementation of Control Systems Owns, drives, and has full accountability for designing and implementing new control systems and equipment on capital projects with the input from the engineering team. Oversees outside system integrators and controls contractors in their work within the facility. Ensures that all projects are documented, and information is available for use by all maintenance and production employees. Ensures work is accomplished in a safe and sanitary manner by directing employees and contractors and monitoring adherence to Company policies. Control System Maintenance & Inspection Has accountability for supporting server-based solutions and/or network infrastructure to maximize effectiveness of the plant's investment in shared computing resources, including effective deployment and utilization of servers (standalone and clustered), thin clients/terminal services, structured cabling, routers, switches, and network This more in the controls system side of our network. Asset-Center, Wonderware etc. Performs, provides details for, and inspects repairs to control and instrumentation systems to prevent downtime and ensure compliance with plant standards and governmental regulations. Determines necessary quantities of spare controls and instrumentation parts and supplies for all plant equipment. Ensure all Control systems, PLC and MCC have a current I/O List. Training and Documentation Ensures that appropriate training and documentation is available for use in proper training of Maintenance and Operations personnel. Coordinates, champions, and provides training and development for Maintenance Technicians to upgrade their controls skill levels. Accountable for maintaining appropriate records and files pertaining to plant maintenance activities to ensure availability of information regarding machine and facilities requirements. Problem-solving & Troubleshooting Acts as resource to production and maintenance teams, in problem solving and troubleshooting, operational activities to reduce downtime related to electrical and control problems. Integrates LEPRINO QUALITY into all aspects of the Allendale plant as evidenced by demonstrated continuous improvement, teamwork with co-workers, distinguished customer service and striving for excellence. Qualifications & Experience: Knowledge and Skills Knowledge of plant controls systems including PLCs and industrial automation software such as Wonderware. Proficient in the Microsoft Office Suite programs. Familiar with industrial operations, preferably dairy or food manufacturing. Effective oral and written communication skills. Excellent organizational skills. Creative thinker with a process improvement mindset. Demonstrated experience achieving high levels of customer service with cross-functional teams. Education and Experience Minimum of two-year electrical/electronic technical degree or five years demonstrated experience in industrial controls system development and troubleshooting. Or aptitude to go to classes to augment either. Strong knowledge of maintenance industry best practices. Practical experience leading loss control efforts in general industry. Offering you in return: A chance to be part of a global team of individuals passionate about producing and delivering high-quality products that help feed and nourish families around the world. Leprino Foods could not be where it is today without our incredible employees. That is why we share in our success together by rewarding you for your hard work. Hiring great people who are in it for the long run is our goal. Through competitive salaries, tuition assistance, vacation, holiday, dedicated sick time, matching 401(k), annual merit increases and bonuses, as well as our annual Profit-Sharing plan. Your impact will be noticed and rewarded, as you seek to further our company, our customers, and one another. Our Story: Leprino Foods' history dates back over 65 years, when Jim Leprino first started making small batches of mozzarella for local markets and eateries in the Little Italy neighborhood of Denver. We've grown a bit since then. Today, Leprino is the world's largest manufacturer of mozzarella and lactose, and a leading producer of whey protein. Still owned by Jim and the Leprino family, our sights are set to be the “World's Best Dairy Food and Ingredient Company.” To help us achieve that bold vision, we're looking for our secret ingredient: You. A motivated team member who is the best at what you do. Three people in a small corner grocery store in the early 1950s have now grown to over 4,300 employees throughout 16 global locations. Will you join us on our journey? Leprino Foods Company utilizes the services of Psychemedics to perform our Hair Follicle Drug Testing. Additional information about this process can be obtained at ******************** Leprino Foods Company supports a drug-free workplace and is an EEO/Affirmative Action Employer - M/F/Disability/Veteran Leprino Foods requires all individuals to wear the appropriate Personal Protection Equipment (PPE) as required by the role and location At Leprino, we believe in equal employment opportunity and make employment decisions based on each individual's unique talents, experience, skills, and knowledge; we do not discriminate on the basis of any personal characteristics. We know we are better together and are committed to creating an inclusive and supportive culture in which all employees can thrive. Nearest Major Market: Lubbock

Work with Us. Change the World. At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the worldâs most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. Job Description AECOM has a position opening for a Protection and Controls Engineer to support our growing Energy Business Line's Engineering Center of Excellence in our Grid Modernization programs, projects and pursuits. Our team provides a wide range of electrical engineering services across markets sectors including transmission (substations, OH/UG transmission systems, generator interconnections, interconnection strategy), power distribution (OH/UG power systems, substations, EV charging networks, microgrid design, etc.), renewables (Solar PV, Battery Energy Storage Systems, Wind), and next generation energy (hydrogen, fuel cells, electrolyzers, etc.). We are looking for a talented engineer with a protection and controls background to promote our skills to new clients and maintain our existing client base. The successful candidate will have an understanding and experience in electrical engineering design and technology principles. She/he will be expected to work successfully within a team environment and be able to communicate effectively with other project team members and customers. He/she will have a high level of initiative, motivation, and displays drive, energy and enthusiasm for getting things done with an excellent attention to detail. The responsibilities of this role also include, but may not be limited to, the following: Responsible for the electrical engineering design work on assigned projects Provide mentorship for the other electrical engineers in our High Voltage/Power team Working with Project Engineer and Project Manager on developing design schedules and budgets for electrical engineering work activities Performing Power system studies and system protection settings coordination on various project Generate basis of design documentation for protection settings and relay configurations Supporting projects during construction, start-up, and commissioning Reviewing engineering work performed by peers Attending client meetings Occasional travel to client and/or project sites (including data gathering and field walks) Mentor early career engineers and facilitate internal training sessions, if requested Level specific responsibilities: Serves as lead engineer on projects of all sizes Senior technical resource may serve as technical advisor for team Provides specialized technical input to studies and design for staff's specific area of expertise. Develops study and design procedures to facilitate high quality cost effective work by others. Participates in interdisciplinary review of project deliverables. Develops construction cost estimates and estimates of technical efforts for projects. Uses expertise in all steps of completing discipline component of PS&E package. Performs quality control review of design calculations or drawings. Prepares technical specification sections. Provides input to the development of engineering budget and schedule to meet requirements. DCS-Energy AECOM's Energy practice provides a wide range of services from consulting and engineering design to energy engineering, energy procurement and construction (EPC) for power, energy efficiency, and renewable energy clients. Our understanding of the big picture - and the interconnection between generation, distribution, storage, and the demand side of the meter - allows us to deliver holistic strategies that improve and modernize next generation energy infrastructure. We connect knowledge and experience across our global framework to bring together a unique combination of engineers, planners, scientists, and project managers who advance cleaner, secure, and more sustainable energy solutions. Qualifications Minimum Requirements: * Bachelor's degree in Electrical Engineering and 6 years of relevant experience or demonstrated equivalency of experience and/or education. * 6 years of relevant protection and controls experience. Preferred Qualifications: Professional Engineering licensure preferred 10 yrs. experience with a minimum of 2 years as project lead Knowledge of FERC and NERC requirements Experience with IEC61850 Successful track record working with remote teams Experience on full EPC, Design/Build projects from start to finish. Plant Startup and Commissioning Field Experience Power systems analysis software experience (SKM, EasyPower, Etap). Relay coordination utilizing ASPEN OneLiner Experience developing native relay setting files Distribution automation experience Experience working in collaborative 3D model environments (e.g. Navisworks) Additional Information * Relocation assistance is not available for this role * Sponsorship for US Employment Authorization is not available for this position. About AECOM AECOM is proud to offer comprehensive benefits to meet the diverse needs of our employees. Depending on your employment status, AECOM benefits may include medical, dental, vision, life, AD&D, disability benefits, paid time off, leaves of absences, voluntary benefits, perks, flexible work options, well-being resources, employee assistance program, business travel insurance, service recognition awards, retirement savings plan, and employee stock purchase plan. AECOM is the global infrastructure leader, committed to delivering a better world. As a trusted professional services firm powered by deep technical abilities, we solve our clients' complex challenges in water, environment, energy, transportation and buildings. Our teams partner with public- and private-sector clients to create innovative, sustainable and resilient solutions throughout the project lifecycle - from advisory, planning, design and engineering to program and construction management. AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2024. Learn more at aecom.com. What makes AECOM a great place to work You will be part of a global team that champions your growth and career ambitions. Work on groundbreaking projects - both in your local community and on a global scale - that are transforming our industry and shaping the future. With cutting-edge technology and a network of experts, you'll have the resources to make a real impact. Our award-winning training and development programs are designed to expand your technical expertise and leadership skills, helping you build the career you've always envisioned. Here, you'll find a welcoming workplace built on respect, collaboration and community-where you have the freedom to grow in a world of opportunity. As an Equal Opportunity Employer, we believe in your potential and are here to help you achieve it. All your information will be kept confidential according to EEO guidelines.

Joining Arup o Arup's purpose, shared values, and collaborative approach has set us apart for over 75 years, guiding how we shape a better world. We are seeking a Protection & Control Settings Engineer with technical experience in the application of protection settings for HV substations for power utilities and for the interconnection of renewables and data centers. In this role you will support the delivery of substation projects for electric utilities, contractors and developers. This position can be worked out of our Houston, Dallas, Los Angeles, San Francisco or Austin offices. The opportunity: Perform system protection setting calculation, development of relay logic diagrams, and protection coordination on various substation projects up to 500kV voltage level. Develop design basis documentation for protective settings, relay settings calculations and generate native relay configuration files using SEL AcSELerator, GE EnerVista and/or similar vendor software. Apply industry standards for the protection of system equipment, including power buses, power transformers, HV/MV circuit breakers, capacitor banks, reactors, transmission lines, and distribution feeders. Perform power system modeling and protective relay coordination analysis using ASPEN OneLiner or Siemens CAPE, ETAP, SKM, and/or CYME software. Prepare design calculations, including short circuit calculation, current transformer performance and ratio selection, over-current element coordination, zone-distance element selection and coordination, and relay loadability calculation. Provide engineering support with construction and commissioning activities for substations. At Arup, you belong to an extraordinary collective - in which we encourage individuality to thrive. Our strength comes from how we respect, share and connect our diverse experiences, perspectives and ideas. You will have the opportunity to do socially useful work that has meaning - to Arup, to your career, to our members and to the clients and communities we serve. The skills: Bachelor's degree in Electrical Engineering from an accredited university. Licensed Professional Engineer (PE) is preferred. Proven 4+ years experience in development of protection relay setting for transmission substations. Knowledge of FERC and NERC requirements as they pertain to electric utility reliability requirements. Experience in power systems modeling and protective relay coordination analysis using ASPEN OneLiner or Siemens CAPE, ETAP, SKM, CYME software. Ability to perform Arc Flash and other power system studies is preferred. Ability to read and interpret protection single lines, three lines, schematics, functional diagrams, etc. Experience with IEC61850 and its implementation is preferred. Ability to work both independently and collaboratively, as needed, to achieve agreed goals and results. Excellent communication skills - able to interact with clients, regulatory bodies, vendors, and internal stakeholders. Ability to represent the company credibly. The ability to prioritize work effectively, manage deadlines and organization skills required for our rapidly changing environment. Please note that all applicants must apply directly via the job portal. If this role is not quite what you are looking for but you are interested in other opportunities for a future with purpose, please sign up to join our Talent Community where you will be kept up to date with roles suitable for you to shape a better world. What we offer you At Arup, we care about each member's success, so we can grow together. Guided by our values, we provide an attractive total reward package that recognizes the contribution of each of our members to our shared success. As well as competitive, fair and equitable pay, we offer a career in which all of our members can belong, grow and thrive - through benefits that support health and wellbeing, a wide range of learning opportunities and many possibilities to have an impact through the work they do. We are owned in trust on behalf of our members, giving us the freedom, with personal responsibility, to set our own direction and choose work that aligns with our purpose and adds to Arup's legacy. Our members collaborate on ambitious projects to deliver remarkable outcomes for our clients and communities. Profit Share is a key part of our reward, enabling members to share in the results of our collective efforts. Benefits at Work - At Arup, we have a comprehensive and valuable benefits program that works for our employees and their families while keeping costs low. These benefits provide health and welfare security for you as well as paid time off for rest and renewal. As a member of Arup, everyone shares in our success through a global profit share scheme (payments are dependent on the firm's financial performance). Our Global Profit Share Plan (paid bi-annually) provides an opportunity for you to share in the success of the Firm. As a valued employee of Arup, you can also choose to participate in our 401(k) plan with up to 10% company match to help you save for your future Flexible Working - We believe that flexible arrangements create a more inclusive way of working that supports our diversity and the wellbeing of our people. Options for alternative schedules and the ability to work outside of the office for a portion of your workweek are available Hiring Range - The good faith base salary hiring range for this job if performed in Houston is $94,500 to $127,300 per year. This range is commensurate with experience, educational background, and skill level. Benefits are not included in the base salary. Please note hiring ranges for candidates performing work outside of Houston will differ. Different People, Shared Values Arup is an equal opportunity employer that actively promotes and nurtures a diverse and inclusive workforce. We welcome applications from individuals of all backgrounds, regardless of age (within legal limits), gender identity or expression, marital status, disability, neurotype or mental health, race or ethnicity, faith or belief, sexual orientation, socioeconomic background, and whether you're pregnant or on family leave. We are an open environment that embraces diverse experiences, perspectives, and ideas - this drives our excellence. Guided by our values and alignment with the UN Sustainable Development Goals, we create and contribute to equitable spaces and systems, while cultivating a sense of belonging for all. Our internal employee networks support our inclusive culture: from race, ethnicity and cross-cultural working to gender equity and LGBTQ+ and disability inclusion - we aim to create a space for you to express yourself and make a positive difference. Discover more about life at Arup at *************************************** Our Application Process We will be reviewing our candidates for this position on a rolling basis. Once you have applied you will be evaluated and potentially moved on to the next round, at which point a member of the talent resourcing team will reach out to you directly. Arup is an equal opportunity employer. All qualified applicants will receive consideration without regard to race, colour, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, spouse of a protected veteran, or disability. Stay safe online. Recruitment fraud is on the rise, and Arup's name, logo, and branding have been used in fraudulent job advertisements. Arup will never ask for bank information as part of our recruitment process. #LI - HA1REF:EN

Controls Engineer Newark, DE | Baltimore, MD | Houston, TX | Valley Forge, PA | Allentown, PA | Pittsburgh, PA | Danbury, CT | Taunton, MA | Denver, CO We're attending several college career fairs this fall (2025). Please submit your application through Handshake for the office location of your choice. ACE is looking for candidates across all of our locations. If you have any questions, contact us at **********************. Are you looking for a career where you will receive immediate on the job training working side by side with automation experts on a variety projects? Are you motivated to help local manufacturing industries achieve their energy efficiency and sustainable business practice objectives? Applied Control Engineering, Inc. (ACE) provides automation solutions to a diverse set of industries, including chemicals, pharmaceuticals, industrial gases, discrete manufactured products, and more. Engineers at ACE have become industry leading technical experts, project managers, sales engineers, or engineering managers. ACE is seeking entry level, passionate engineers to join our team. JOB OVERVIEW As a new engineer at ACE, you will join a project team that is delivering a customer project. As a part of that team, your duties will include: Participating in the design, development, and documentation of systems which meet our customers' requirements. Communicating with customers, both at the office and on-site, to present your work and come up with unique solutions. Traveling to customer sites to implement and test project deliverables. Meeting with Project Managers and Lead Engineers to assess your project's statuses and determine the most effective approach for successful completion. ACE offers professional development opportunities that allow a new engineer to choose from multiple career paths. As a new engineer at ACE, you will report to a team leader and mentor to help set and achieve your career goals. ACE has a 30+ year history of promoting from within. In fact, ACE is managed and currently owned by engineers who started their careers as entry level engineers at ACE. EDUCATION Bachelors (or higher) degree in Chemical Engineering, Electrical Engineering, Mechanical Engineering, Robotics Engineering, Bioengineering, Industrial Engineering, Computer Engineering or Computer Science REQUIRED SKILLS Possess in-depth knowledge of programming concepts Thorough knowledge of business application software (MS Office package) Strong written and oral communication skills Displays a positive and professional demeanor Demonstrates a flexible and cooperative working style Willing to work off-hours when required Must possess a valid driver's license Willing to submit to drug testing and/or background checks as mandated for a) employment, and b) customer contract requirements PREFERRED QUALIFICATIONS: General understanding of process control or other manufacturing processes. Prior experience with or exposure to PLC, HMI, SCADA, DCS and MES technologies. Self-starter that can work individually or in a group, demonstrated leadership qualities. ABOUT ACE Applied Control Engineering, Inc. (ACE) is a privately owned automation and control systems integrator. In the years since its establishment in 1991, ACE has consistently grown and is one of the largest integrators in the United States. ACE serves our customers out of nine offices in seven states (Colorado, Connecticut, Delaware, Massachusetts, Maryland, Pennsylvania, and Texas). ACE's vision is for continued growth to meet the automation challenges of America's manufacturing industries. ACE provides employees with a comprehensive and attractive benefits package and salary ranges commensurate with experience. For more information about ACE, please visit our website at **************** ACE is committed to a drug-free workplace. All employment is contingent upon successful completion of drug and background screening. ACE is an equal opportunity employer. ACE will consider all qualified applicants for employment without discrimination on grounds of disability, sex or sexual orientation, race or national or ethnic origin, age, religion, protected veteran status or any other characteristic protected by law. If you need a reasonable accommodation to meet any of the above qualifications, please contact Human Resources.

Great new opportunity for an Industrial Electrician! The ideal applicant will perform maintenance and repair operations necessary to keep plant, equipment, machinery and tools in good operating condition, working in the many diversified capacities required in electrical maintenance. Make all necessary mechanical repairs to electrical equipment, including the replacement, repair and installation of bearings, gears, shafts, pins, couplings, etc. Analyze all types of circuits, wiring diagrams and drawings as required to install, repair, adjust, calibrate, program, time, construct, modify or service all types of materials and electronic or electrical tools. Designs, installs, troubleshoots and implements programs for programming logic controllers, calibrate, program, design, test and adjust any type of integrated, indicating or graphic electrical or electronic instruments or controllers, pressure and flow meters, combustion control equipment, regulator, timing devices, pyrometers. Detect and report faulty material, environmental hazards, and/or improper operation of plant equipment or machinery; refer questionable and unusual matters to proper supervision. Follow all safety regulations and practices. The above statements are intended to describe the general nature and level of work being performed by people to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills of personnel so classified. Requirements High School/GED required. 2+ years working in an industrial environment on a mechanical maintenance craft. Experienced working in extreme weather conditions. Willing to climb, bend, stand, or lift items. Strong mechanical aptitude. Must be able to pass a written test, Face-to-face interview, and a hands on assessment. Wages & Benefits Optimus Steel has a competitive benefit package. Medical/Prescription Dental, Vision, Health & Dependent Care FSA 401K, Company match Basic Life/Accident Insurance Employee Assistance Program Salary Description $35.37 - $44.77 Per-hour

Adecco is hiring immediately for Engineering Techs with a local client in Austin, TX. Weekly pay starting at $23.00-$26.00 per hour and competitive benefits with options such as medical, dental, vision, and 401(k). We have openings on multiple shifts and can help you find the best shift to fit your schedule. This position requires a High School Diploma or GED, 1-2 years of previous experience, the ability to work independently or with a team and the ability to multitask. In this role, you will be performing complex testing, troubleshooting, and repair tasks on electro/mechanical systems, working with intricate schematics, diagrams, and verbal/written instructions, often with minimal documentation. The role involves performing mechanical, soldering, and repair duties, writing detailed technical reports and test procedures, conducting operational tests and fault isolation, diagnosing and resolving system malfunctions, collaborating with other teams to address undefined issues, and assisting or mentoring junior technicians with complex tasks. Click on Apply Now to be considered for this Engineering Tech job in Austin, TX. **Pay Details:** $23.00 to $26.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to ********************************************** The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: + The California Fair Chance Act + Los Angeles City Fair Chance Ordinance + Los Angeles County Fair Chance Ordinance for Employers + San Francisco Fair Chance Ordinance **Massachusetts Candidates Only:** It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Responsibilities: Work closely with the maintenance teams and other departments to upgrade the computerized maintenance management system (CMMS). Collaborate with maintenance personnel to assess current maintenance checklists and identify areas for improvement. Recommend and implement necessary changes to enhance the effectiveness and efficiency of maintenance procedures. Ensure compliance with industry standards, regulations, and best practices. Analyze maintenance data to identify trends and areas of improvement in equipment reliability. Propose preventive maintenance strategies to minimize downtime and increase equipment longevity. Actively seek opportunities to enhance maintenance practices and efficiency. Stay up to date with industry advancements, new technologies, and best practices. Research and compile information and feedback from crafts necessary to generate highly effective and detailed job plans. Initiate the procurement of materials, special tools and unique items required in the job plans using relevant maintenance programs and database tools. Transition capital improvement projects from project stage to operations and update information in the database to reflect the improvement, addition, or deletion of equipment and their associated spare parts and maintenance procedures. Prepare and provide detailed job plans for moderately complex preventative maintenance activities that comply with fundamental plant maintenance procedures and practices. Plan and schedule maintenance downtime and communicate cross functionally with technical and management teams to minimize production impact and improve reliability. Maintain custom databases and computerized maintenance management system to support specific work projects and processes. Engage in continuous improvement planning to enhance on time performance of technical activities. Independently solve moderately complex issues with minimal supervision, while escalating more complex issues to appropriate staff. implement the preventative maintenance (PM) program for production assets and facility by diligently following written procedures for routine maintenance tasks and ensuring good-practice documentation Troubleshoot and repair facility and production equipment Undertake project-related facility/infrastructure upgrades as assigned by your manager Efficiently undertake project-related production equipment upgrades, oversee commissioning processes, and diligently fulfill any additional duties as assigned by your manager Execute various administrative duties with precision, including conducting training sessions, maintaining the shop area, sourcing maintenance spares, resolving safety concerns, and actively participating in the periodic review of revision-controlled documents Develop & execute activities involving continuous improvement tools, analysis of product irregularities, recommending solutions & facilitating cost down initiatives related to improving product costs. These duties would include training & instruction of appropriate team member's day-to-day floor support. Assist in identification of unacceptable performance through analysis & acquired technical knowledge of the product & process including waste & cost reduction. Assist in & learn process for prepare cost estimates, financially justifying project, prepare budgets, review design, supervise installation & commissioning. Assists in research of new equipment, systems & processes to advance plant operations. Gain understanding & assist to ensure safety, environmental & other regulatory compliances by working with appropriate associates on EHS issues, following the implementation of MSR's & improving the communication across all relevant departments. Participate in contractor management process & periodically assist with & contractor's work to ensure that safe work practices & standards operating procedures are followed. Requirements: Repairs and maintain mechanical equipment, including but not limited to electrical and welding Performs routine maintenance on various types of equipment in accordance with OSHA Standards Dismantles malfunctioning systems and tests components using electrical and mechanical; review codes, program, and troubleshoot equipment Evaluates assigned maintenance malfunctions for repair; install assigned maintenance systems, equipment or components; prepares technical reports to document preventative maintenance issues. Disassembles and assemble units, cleans, lubricates, repairs, and replaces parts Perform repairs, preventive maintenance, and component replacement on electrical, security, and mechanical systems, perform maintenance and repairs within scope of authority, and in accordance with all safety regulations and procedures, and notify supervisors of repair problems beyond the scope of authority. Reads and interprets blueprints, planning sheets, sketches, and related technical data to determine tooling requirements, setup procedures, control settings, and machining methods and sequences.

Ampcus Inc. is a certified global provider of a broad range of Technology and Business consulting services. We are in search of a highly motivated candidate to join our talented Team. Job Title: Technician, Engineering I. Position Summary An ideal candidate will possess technical knowledge in various disciplines related to health and safety with a genuine interest in promoting a safe work environment. The desired candidate will have the ability to see a big-picture view while possessing a strong grasp of the details. Working in a team environment to find mutually agreeable and effective solutions in the safest manner possible, while supporting personnel and business needs. Responsibilities: Foster a culture of safety and responsibility by ensuring compliance with regulations and standards. Conduct regular workplace safety inspections in a semiconductor manufacturing environment to identify and assess potential hazards. Input data from inspection results daily into an applicable computer program. Coach other workers in the cleanroom on safe work practices. Conduct site orientation training for new employees on workplace safety procedures and protocols. Assist in the investigation of incidents to determine the root cause. Be a point of contact for safety-related inquiries or concerns in the cleanroom. Participate and contribute to site safety committee meetings. Provide a positive and professional image of the company to customers, vendors and co-workers. Possess a genuine desire to provide outstanding service by being enthusiastic and motivated. Qualifications: High school diploma or equivalent required. 2-year college degree in a science or safety field is preferred. Safety experience and/or work in a semiconductor manufacturing facility is a plus. Strong ability to communicate in verbal and written form. Familiarity with OSHA regulations and standards. Excellent problem-solving skills and the ability to work in cross-functional groups. Able to use Microsoft Outlook, Excel, PowerPoint, Teams and SharePoint. Ability to work well in a team environment, collaborate on projects and work independently. Physical Requirements: Job duties are performed mostly in a clean room environment. Mechanical aptitude, manual dexterity and ability to lift/carry objects up to 33 pounds may be required. May require bending/stooping/crawling/climbing and use of PPE. Ampcus is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veterans or individuals with disabilities.

The Automation Controls Engineer III is a senior technical role responsible for maintaining, optimizing, and improving control and data acquisition systems for manufacturing, packaging, and support equipment. This includes SCADA systems, PLCs, and HMI devices. The position involves advanced troubleshooting, mentoring junior engineers, and leading automation projects to enhance efficiency, reliability, and compliance with industry standards. Key Responsibilities Serve as a senior technical resource for automation systems, including SCADA, PLC, and HMI devices. Lead complex troubleshooting and provide technical guidance to resolve automation issues. Collaborate with internal teams, contractors, and vendors to execute projects effectively. Oversee and evaluate work performed by external partners, ensuring compliance with quality, safety, and GMP standards. Investigate and resolve quality deviations related to automated equipment, including root cause analysis and corrective actions. Develop and maintain documentation for automated systems, including SOPs, PMs, and technical manuals. Provide programming and integration support for building monitoring systems and HMI displays. Identify and implement cost-effective automation upgrades aligned with business objectives. Mentor junior engineers and technicians to foster skill development. Support validation activities and ensure compliance with regulatory requirements. Continuously assess and recommend emerging automation technologies to improve system performance. Qualifications Bachelor's degree in Electrical Engineering or related field. Minimum of 3 years of experience in automation integration. Hands-on experience with PLC and HMI systems (e.g., Rockwell, Allen Bradley, Siemens). Strong problem-solving, organizational, and communication skills. Ability to read and interpret technical documentation and schematics. Proficiency in Microsoft Office and relevant automation software. Preferred Skills Experience with building management systems and cleanroom facilities. Knowledge of regulatory standards (OSHA, EPA, FDA, EU, etc.). Ability to troubleshoot and resolve complex control system issues in a production environment.

Must Have: One or more years of experience interpreting technical drawings/documents and performing technical analysis or drafting using computer-aided design software.A degree in computer-aided design or relevant field may be substituted per * guidelines for certain years of experience. Driver's license JOB DESCRIPTION General Overview: At an entry level, performs drafting and/or engineering support duties. This position develops competence by performing structured work assignments and receives instruction, guidance and direction from supervisor, manager and/or more experienced colleagues. This position focuses on either drafting or engineering support duties, or performs a combination of the following duties. Reads and interprets engineering drawings, construction drawings and other technical information. - Using computer-aided design software and equipment, prepares detailed engineering drawings, maps and graphs from provided materials such as previous drawings, layouts, detailed sketches and standard references. Clearly indicates revisions. Files drawings and drawing update documentation according to standard procedures. - Assists in drafting solicitation documents using established procedures, formats and templates to support procurement and contract activities. Assists with field and/or office research related to field measurements, historical engineering drawings, equipment databases, microfilm, inventory, electronic document management system (EDMS) records and other technical records to design equipment and layouts, as well as to produce equipment ratings and facility statistics. Field research may involve various physical activities. - Prepares basic specifications, materials and fixed capital unit (FCU) lists. Assists in setting up work orders and requisition entries. Performs data entry in the departmental engineering database. - Prepares basic reports related to projects, work plans, equipment, assets and budgets. Assists with preparing more complex reports. - Operates equipment, such as plotters, printers, copiers and scanners. - Gathers engineering information by traveling independently to various locations (substations, power plants, water systems, etc.) as necessary. This general overview only includes essential functions of the job and does not imply that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instruction and to perform any other job-related duties requested by supervisor or management. Minimum Qualifications: One or more years of experience interpreting technical drawings/documents and performing technical analysis or drafting using computer-aided design software.A degree in computer-aided design or relevant field may be substituted per * guidelines for certain years of experience. Driver's license Knowledge, Skills and Abilities: Knowledge of engineering principles Knowledge of computer aided drafting principles, standards and techniques Knowledge of electronic document management systems (EDMS) Knowledge of work management systems Basic skill in computer aided drafting Basic skill in reading and interpreting diagrams and prints Basic skill level in office productivity applications (such as email, word processing, spreadsheets, etc.) Skill in reading and interpreting technical information Skill in the use of test equipment and/or other specialized tools Skill in analyzing and solving problems Skill in verbal and written communication Skill in operating plotters, printers, copiers and scanners Ability to perform accurate data entry Ability to work in a team environment Work Environment: Work hours are spent in an office, industrial, electrical substation and/or plant environment Work involves exposure to noise Work involves exposure to various and sometimes extreme weather conditions Physical Demands: Work hours are spent in an office, industrial, electrical substation and/or plant environment Work involves exposure to noise Work involves exposure to various and sometimes extreme weather conditions Work involves frequent finger/hand manipulation in using a keyboard and mouse Work involves climbing, crawling, crouching or other non-sitting positions in performing field duties less than 20% of the time Work involves standing and/or walking in performing field duties less than 20% of the time

Work days/Shift Hours - if applicable: Wednesday - Saturday, 1:00 PM - 11:30 PM Compensation: Starting pay ranges from $32.75 to $41.00 per hour, based on experience. Additional earning opportunities may include performance-based incentives, quarterly bonuses, referral bonuses, and comprehensive benefits. General Purpose The role of a Controls Technician is to provide competent and effective electrical and controls support to Plant operations. The ability to perform work safely, meet the needs of Operations, execute the maintenance program and comply with all safety codes such as the National Electrical Code is paramount. The Controls Technician must ensure plant electrical and control systems are installed, maintained and modified in accordance with local, state and national electrical safety codes. The Controls Technical must identify, troubleshoot and repair problems in electrical and controls wiring and programming that occur in production equipment and systems and able to work with voltages up to 600V, three-phase & single-phase A/C circuits, transformers, switchgear, and motor control centers. He/she must be able to run tests, isolate problems, replace faulty sections of wiring, and perform other tasks as necessary. He/she also performs preventive maintenance and upgrades to electronic control systems. Duties and Responsibilities Perform preventive maintenance on electrical and control systems to include disassembly, cleaning, reassembly, and calibration. Understand how to read and translate the information found within building and process blueprints and one-line diagrams to install outlets, circuits, load centers and other forms of electrical equipment. After installing the electrical equipment, test all connections to ensure all components are working properly and safely. Troubleshoot and diagnose electrical and controls issues in industrial equipment and processes using experience, system knowledge and proper instruments appropriate to the voltages and currents encountered. Meet and follow local, state and national electrical codes. Maintain motor control centers (MCC's), switchgear, industrial robots, electronic controllers on mechanized tools, as well as transformers and generators. Communicate with management, engineers, mechanics, and equipment operators to advise them if there are any potential electrical hazards. Install fiber optic cables, coaxial wires and computers in support of plant telecommunications systems. Execute the maintenance work schedule as provided by his/her supervisor. Proper execution of the work schedule will require strategic decisions to ensure the scheduled work will be completed within the period scheduled. Keep the assigned Plant Controls Specialist informed of all issues which may affect the operational capability of the area processes and equipment. Examine jobs to be done and determine scope and best way to accomplish the work. Consult with requester, maintenance planner, and/or supervisor when necessary. Obtain one-lines, drawings, instructional manuals and special procedures, as needed, from files or other sources. Make any additional sketches, diagrams, etc., necessary to clarify the intent of the work order. Ensure the safety needs are given a top priority in operations support and work execution. Some examples are Arc Flash/Shock Hazard safety, confined space entry, LOTO, hazardous materials, hand tool safe use, etc. Update the computerized maintenance management system (CMMS) as necessary to maintain accurate plant asset historical records. Have complete knowledge of plant's processes and packaging systems. Adhere to Good Manufacturing Practices (GMPs) in the execution of the work schedule and operational support. Ensure the shop is maintained in a safe and orderly fashion. Enforce plant polices in the execution of their assigned duties. Protect the integrity and quality of product at all times. Attend meetings and supports continuous improvement initiatives. Recommend equipment to be included in preventive maintenance programs. Suggest improvements to all maintenance processes, including planning scheduling, preventive maintenance, corrective maintenance, CMMS, storeroom operations, etc. Promote the conservation of energy and water. Maintain close contact with assigned maintenance crew, the production supervisor and equipment production operator technicians. Make recommendations for system improvement. Maintain necessary records and files and distributes meaningful and accurate control reports. Recommend additions to storeroom stock. Perform other tasks and special assignments as requested by management. Qualifications Education: High School Diploma or GED; technical mfg. trade, or Associate's Degree preferred. Experience: High School Diploma or GED; technical mfg. trade, or Associate's Degree preferred. Basic industrial math skills, English language reading comprehension and writing 3-5 Years of manufacturing maintenance experience focused on controls and electronics maintenance preferred. Proficiency in controls equipment, i.e. Allen Bradley PLCs, VFDs, HMIs, and Industrial Networks required. Experience with various Human Machine Interfaces Basic Programmable Logic Control (PLC) knowledge required. Must be able to use a computer and associated PLC software programs Able to execute small and medium projects involving controls equipment such as SLC 500, Controls Logix, Panel View Plus and Allen Bradley VFDs Ability to follow manufacturers specifications and schematics. Working knowledge of hand and power tools. Able to read one-line diagrams, blueprints and schematics. Ability to read and interpret a variety of technical data, such as schematics, one-line diagrams, and technical orders relating to the electrical trade. Able to calculate electrical circuit load requirements. Comprehensive knowledge of the operation, capabilities, and limitations of complex electrical power and distribution. Maintenance background, which includes hydraulics, controls, electrical, PLC's, machine tools and pneumatics Skill in troubleshooting electrical problems on large projects and applying test procedures. Skill in the use of hand and power tools of the electrician trade to include a variety of electronic, electrical, or electromechanical test and measurement equipment. Ability to test, calibrate, troubleshoot, overhaul, repair, and install complete electrical systems. May be required to provide own tools Able to lift up to 50 pounds Ability to work on multiple levels, such as catwalks, ladders, etc. and ability to work in extreme temperatures Must have strong problem-solving skills and the ability to work efficiently under stressful situations Must be able to work flexible shift schedules up to 12-hour shifts as determined by business need Perform all tasks in a safe manner to ensure achievement of Quality, Service, Cost,Sustainability, and Safety objectives. Knowledge of safety, environmental, and security regulations, practices, and procedures. Knowledge of regulations, procedures, and policies related to records maintenance and documentation. Applicants with disabilities may be entitled to reasonable accommodation under the Americans with Disabilities Act and certain Texas or local laws. A reasonable accommodation is a change in the way things are normally done which will ensure an equal employment opportunity without imposing undue hardship on Coca-Cola Southwest Beverages. Please inform us at if you need assistance completing this application or to otherwise participate in the application process. Know Your Rights dol.gov Coca-Cola Southwest Beverages LLC is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity and/or expression, status as a veteran, and basis of disability or any other federal, state or local protected class.

Do you have a passion for repairing cars, assisting with providing exceptional guest experiences, and being an innovator in the automotive industry? As an Automotive Service Technician, you will have the opportunity to make a positive impact on our business and customers every day while earning the pay you deserve and awesome benefits! We are looking for smart, energetic, technically-focused Technicians who will help us redefine the car-servicingexperience. The "B" Level Service Technician has the responsibility of understanding and completing routine repairs necessary for the repair of customer vehicles. This individual will perform general repairs and diagnosis with some assistance. These repairs include but are not limited to light engine work, transmissions, clutches, drive shafts, electrical systems (starters and alternators) HVAC systems, steering & suspension systems. This individual will have a majority of their manufacture certifications. Make accurate use of the multi-point inspection form on each vehicle Document all work performed and recommended on assigned repair order Communicate with service advisor when additional work is needed or if repairs cannot be completed within the promised time Maintain technician proficiency as specified by Asbury standards Conduct road test to determine work needed and to confirm work was successfully completed when necessary and practical Perform all levels of diagnosis and repair on vehicles Perform all levels of preventive/routine maintenance services Utilize product and technical training as assigned by the manufacturer and management Participate in manufacturer-sponsored training programs and schools to continuously expand your knowledge of new technology Maintain manufacturer (CSI) Customer Satisfaction Index at or above the Asbury specified goal(s) in service for district, regional and national scores Complete the work, notations and time-keeping necessary to the successful completion of warranty repair orders and the filing of warranty claims Report to management any situation or condition that would jeopardize the safety, welfare, or integrity of the dealership, its customers or employees Take care to ensure that customer's vehicles are returned to them as clean as they were prior to being serviced Understand and complete required training for compliance with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Comply with all federal, state and local laws, as well as company policy, regarding safeguarding all customer vehicles, property and information ASE certifications heavily preferred Manufacturer certifications heavily preferred Previous automotive technician experience required Must have basic tools Must have great technical and mechanical skills Must be a team player and have the ability to work repetitively on complex tasks Must be a minimum of eighteen years of age Must have a valid driver's license Must be able to pass pre-employment screening (background & drug test) Company Benefits: Pay and Recognition: Paid holidays & paid time off Deferred Holiday Pay Match Paid training Stock Awards(select management and front-line team member's eligible Insurance / Retirement: Insurance: medical, vision, dental, accident, critical illness and hospital indemnity plans Up to 12 weeks paid pregnancy leave (disability leave) Paid Parental Leave Health savings Flex spending accounts (tax free) Short-term and Long-term disability plans Life Insurance (Whole Life and Term) 401k with company match Learning, Tuition Assistance and Career Development: Digital career path tool to assist with career development Continuous training through Asbury's Internal Learning Management System Professional growth and development opportunities Additional advantages: Student loan relief resources Employee assistance program Employee discounts on parts and service repairs Scholarship awards Opportunities to join our community service initiatives, which includes paid volunteer hours Aggressive Employee referral program with bonus opportunities INDTECH

**Love working with your hands? Enjoy diagnosing and solving problems? Join Blue Compass RV as a Service Technician and work on everything that makes an RV a home on wheels-no engine work required! ** If you have experience in HVAC, Electrical, Plumbing, Carpentry, Mechanical Repair, Maintenance or Appliance Service, we want to talk to you! TRAINING AND CAREER GROWTH: At Blue Compass RV, we offer training like no other in the industry. Whether you're just starting out or have years of experience, we're committed to helping you level up your skills and grow your career. We don't just train you-we invest in your future. Here's what sets our training apart: Hands-on, state-of-the-art technician training All certifications are fully paid-no cost to you Ongoing web-based learning and manufacturer-led workshops On-the-job diagnostics and advanced technical training Clear advancement paths to Master Tech, Service Manager, and beyond COMPENSATION: $25-$35/hourly WHAT WE HAVE TO OFFER: Paid Mentorship program Apprentice Program Retention Bonus Structured Career Path Gas Discount Medical, dental, vision, disability, FSAs, and life insurance! Paid Time Off and paid holidays Employee assistance program Pet insurance Referral Program 5-day work weeks Legal coverage 401K! WHAT YOU WILL DO: Diagnose and repair issues with electrical, plumbing, HVAC, carpentry, and appliance systems Perform scheduled maintenance on RVs including oil changes, battery checks, tire/brake checks, and sealant inspections Install RV accessories including hitches, slide toppers, awnings, backup cameras, satellite systems, furniture, and more Track all parts and materials used and ensure proper documentation of diagnostics, cause, and repairs in work orders Communicate clearly with service advisors and managers about job status, additional needs, and timing Ensure the final product meets quality standards before returning to the customer Keep your work area clean, safe, and organized Attend required all paid company training and stay up to date with product knowledge We're hiring individuals with experience in: Automotive, Appliance Repair, Carpentry, Electrical, HVAC / AC Systems, General Maintenance and Plumbing WHAT WE ARE LOOKING FOR: 1+ year of experience in mechanical, maintenance, repair, or technical repair (RV experience a plus) Comfortable using hand/power tools and working in various environmental conditions (heat, cold, heights, noise, etc.) Valid driver's license with clean driving record Must be able to lift up to 25 lbs and move up to 50 lbs with assistance Basic hand/shop tools required Preferred But Not Required: Certification in HVAC, Electrical, Plumbing, or related trade RVTI or RVIA certification Experience with diagnostic software or systems used in RV maintenance WHO WE ARE Blue Compass RV is the fastest growing RV Company with more than 100+ RV dealerships across the country! We staff each dealership with the best people in the business. We are known for the great care we take with customers and associates alike. You are not just an associate with our company, you are family. TAG1

Aerwave delivers next-generation Managed Wi-Fi for multifamily communities-seamless, gigabit-speed internet that's always on, everywhere on your property. With 24/7 domestic support, intuitive digital tools, and real-time insights, we empower residents, property teams, and owners to stay connected and in control. More than just Wi-Fi, Aerwave builds trust and future-proofs your community for tomorrow's digital lifestyle. The Swat Technician will be the tip of the spear, kicking off new construction jobs with contractors, supervising WiFi and network hardware installations, conducting pre-deployment site surveys, activating networks, and providing emergency field support when needed. You will collaborate with Construction Managers, Engineering, and third-party vendors to ensure successful installations from start to finish. This is a dynamic role ideal for a technician with a broad skill set in structured cabling, wireless networking, troubleshooting, and contractor supervision. RESPONSIBILITIES/ESSENTIAL FUNCTIONS: Site Surveys & Pre-Construction Assessments • Perform site walks to evaluate existing conditions and infrastructure readiness. • Document findings and share with engineering and project management teams. • Recommend installation strategies and highlight any field-level risks or obstacles. Installation Oversight & Technical Support • Oversee on-site structured cabling, fiber, WiFi, and network hardware installations. • Conduct quality control checks and provide in-field troubleshooting. • Serve as Aerwave's on-site technical lead, bridging the gap between contractors, engineering, and PMs. Network Activation & Testing • Coordinate with engineering for final network activation and testing. • Validate successful device connectivity, signal coverage, and backhaul performance. • Identify and escalate issues requiring deeper technical investigation. Emergency Support & Escalations • Respond to emergency field service requests and outages. • Diagnose and repair network hardware or low-voltage infrastructure issues. • Communicate findings and resolution paths to internal stakeholders. Documentation & Reporting • Submit detailed daily field reports, including photos, test results, and project status updates. • Maintain and track inventory of hardware deployed or delivered on-site. • Assist in punch-list creation and closeout documentation. Teamwork & Safety • Communicate effectively with customers, team members, and supervisors. • Must maintain a positive attitude and show adaptability to change. • Adhere to safety procedures and regulations. REQUIRED QUALIFICATIONS: Education/Experience: High School Diploma or General Education Degree (GED). 4+ years of hands-on experience in low voltage, cabling, or wireless network deployments. Strong knowledge of structured cabling (Cat6, fiber), WiFi access point installation, and PtP/PtMP wireless equipment. Experience conducting site surveys and interpreting construction drawings. Ability to work independently on active construction sites and occupied buildings. Willingness and ability to travel up to 80% nationwide. Valid driver's license and clean driving record. Basic knowledge of RF and wireless signal propagation principles. Familiarity with testing tools: cable certifiers, OTDRs, light meters, RF scanners. Proficiency in the use of a computer, and software applications including Microsoft Office. Knowledge, Skills, and Abilities: Highly organized and attentive to detail, with the ability to work on multiple tasks/projects simultaneously (multi-task). Effective interpersonal skills with the ability to work with personnel at all levels, both within and outside the company. Easily takes initiative and works independently. Maturity, professionalism, and good work ethic. Physical Demands / Work Environment: Ability to lift and carry up to 50 pounds, climb ladders and work at heights up to 50 feet, and work in confined spaces or outdoor environments. Ability to work in hot, cold, and/or noisy environments. Benefits: Join a dynamic, fast-growing company where you will have the opportunity to make an immediate, high-level impact to Aerwave's growth and success. Clear line of sight for career advancement and significant accomplishments. Base salary that is externally competitive and bonuses and ad-hoc recognition awards, that are based on efforts and tied to performance. We work hard at Aerwave, and you will too. But that means we need time off to rest and recharge. All executive team members receive unlimited paid time off. Additionally, you receive 15 paid Company holidays. High-quality health care coverage through Aetna Base Plan. Aerwave covers 100% of the premium for the base plan and up to 75% of the premium of any higher-tier insurance plan. 401(k) matching 100% up to 4% of base salary.

Ready to take your EEG skills on the road? Join SynapseTBI, a fast-growing neurodiagnostics team, and bring life-changing testing to patients across the country. We're looking for a motivated Ambulatory EEG Technologist who loves patient care, enjoys flexibility, and is excited about a career that blends healthcare with travel. Company Description SynapseTBI offers a comprehensive protocol of objective diagnostic testing for the diagnosis of Traumatic Brain Injuries (TBI), Mild Traumatic Brain Injuries (mTBI), and Post Concussion Syndrome. Recommended and validated by the American College of Occupational and Environmental Medicine (ACOEM) for "Post TBI Patients who either have symptoms of cognitive deficits and/or have sustained a TBI sufficient to cause same", our services also include neurologist consultations, recommended treatment plans, psych evaluations, in-home TBI treatment programs including Neurofeedback, and life care plans. Role Description This is a travel role for an ERP/EEG Technician, primarily covering the Midwest Regions, preferably based in the Dallas area. The EEG Technician will be responsible for performing Neurodiagnostic Testing, assisting with epilepsy and neurophysiology studies, ensuring patient care, and working closely with medical professionals to conduct diagnostic tests, assessments and treatments. What You'll Do: ✨ Travel to patient homes, clinics, and partner sites to set up and remove ambulatory EEG studies and/or run ERP testing along with other TBI diagnostic studies ✨ Apply electrodes and ensure clean, accurate data collection ✨ Teach patients and families how the test works and answer their questions with confidence ✨ Keep equipment in top shape and maintain detailed study records ✨ Represent our company with professionalism, compassion, and a patient-first mindset What We're Looking For: ✔️ EEG experience preferred, but not required (we will teach the testing for the right candidate) ✔️ Someone that works well on their own and doesn't require a micro-manager ✔️ Credentialed techs (R. EEG T.) a plus - but not required ✔️ Someone flexible, detail-oriented, and ready to travel ✔️ Strong communication skills and a passion for helping patients ✔️ A valid driver's license and reliable transportation required Why You'll Love It Here: 🌎 Travel nationwide with all lodging and travel expenses covered 💰 Competitive salary + a comprehensive bonus plan 🩺 Full benefits (health, dental, vision, PTO) 📈 Ongoing training and career growth opportunities 💡 Work with a supportive team that values your expertise If you're looking for a career that takes you beyond the walls of a hospital and gives you the chance to explore new places while making a difference in patients' lives-this is it.

Do you want to learn a skilled trade in the oil and gas industry? Would you love a new career with a company offering training, opportunities to advance, and the potential for multiple pay increases in your first year? Apply for our Entry Level position with Alliance! As a Monitoring Technician, you will work in a recession-proof industry protecting the environment and have the opportunity to learn and advance within our rapidly growing company. We offer a starting pay rate of $19.05 with a clear career path for upward mobility, paid time off, great benefits, and quarterly profit-sharing bonuses. Apply now! During our comprehensive training process, you will learn the following responsibilities for the Entry Level Monitoring Technician (LDAR) position which are located onsite at our client sites: Daily monitoring of components to detect leaking equipment (valves, pumps, connectors, etc.) which can be a source of emissions and volatile hazardous air pollutants Perform and record calibrations on analyzers before use Perform preventative maintenance and troubleshooting on analyzers Identify and report changes to components while performing monitoring Identify and report new or removed components while performing monitoring Identify and report Audio Visual Olfactory (AVO) leaks, Open-Ended Lines (OEL) Identify and report components with missing identification tags Support leak repair activities at customer work sites as required Complete Job Hazard Analysis (JHA) daily Complete Equipment and Vehicle Inspections as required Complete daily paperwork (job summary, component change forms, missing tags, etc) Attend and participate in daily toolbox meetings and scheduled safety meetings Complete all safety and knowledge trainings as assigned Requirements: Ability to pass a comprehensive background check and drug screening Ability to be on your feet for 8-10+ hours per day on uneven ground (concrete, rock, grass, mud/dirt, etc.), while wearing the monitoring backpack (weighing up to 25 lbs.) as well as carry other equipment as needed (ladders, water coolers, etc.) Love being outdoors, working safely in all weather conditions Ability and desire to climb stairs and ladders to high heights (up to 300ft) Ability to understand and use hand-held device, and have some mechanical abilities (preferred) Reliable transportation to the worksites is required Key Benefits Include: Medical, Dental, and Vision Insurance Flexible Spending Accounts 401(K) Plan with Competitive Match Continuing Education and Tuition Assistance Employer-Sponsored Disability Benefits Life Insurance Employee Assistance Program (EAP) Paid Time Off (PTO), Paid Holidays, & Bonus Floating Holiday (if hired before July 1st) Profit Sharing or Individual Bonus Programs Referral Program Per Diem & Paid Travel Employee Discount Hub Alliance Technical Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. #ELLDAR Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Taurus Industrial Group's Specialty Services division is seeking skilled and motivated Field Services Technicians to join our growing team. We provide advanced industrial solutions across power generation, petrochemical, refining, and manufacturing sectors. Our technicians are trusted partners to our clients, delivering precision work in bolting, torquing, machining, induction heating, line-stop, and related specialty field services. If you are a hands-on professional with technical acumen, a safety-first mindset, and the ability to thrive in challenging field environments, we want to hear from you. Key Responsibilities Perform on-site bolting, torquing, tensioning, and induction heating services on critical equipment. Support field machining, hot tapping, and line-stop operations as needed. Install, operate, troubleshoot, and maintain specialized tools and OEM induction equipment. Ensure all work adheres to safety, quality, and compliance standards. Interpret technical drawings, job packages, and client specifications. Collaborate with project managers, supervisors, and customer representatives to ensure timely, accurate, and efficient service delivery. Maintain, calibrate, and prepare rental and company-owned specialty equipment. Travel extensively to client facilities across regional and national assignments. Recommended Qualifications & Requirements Experience: Minimum 3-5 years in industrial services, mechanical maintenance, or specialty field service roles (power plants, refineries, petrochemical, or heavy industry preferred). Certifications/Training: NCCER, OSHA, or equivalent field qualifications (preferred). OEM training on induction heating or bolting/tensioning equipment (a plus). Technical Skills: Proficient in hydraulic, pneumatic, and electronic tool operation. Familiarity with torque/tension charts, machining tolerances, and mechanical fit-up. Physical Requirements: Ability to lift to 50 lbs, work at heights, and endure confined space conditions. Willingness to work extended shifts, nights, weekends, and travel on short notice. Soft Skills: Strong commitment to safety and quality. Clear communication and problem-solving skills. Team-oriented with the ability to adapt to dynamic field environments. Why Join Taurus Industrial Group? Competitive pay with overtime opportunities. Comprehensive benefits: health, dental, vision, 401(k), PTO. Professional training and advancement opportunities. Exposure to cutting-edge specialty service technologies and OEM equipment. Be part of a growing, innovative company that values technical excellence and field expertise. 📍 Locations: Nationwide travel, with primary needs in Texas, Gulf Coast, Northeast, Midwest, and Western U.S. BE SURE TO APPLY ON OUR WEBSITE: ****************