Post job

Controls technician jobs in The Villages, FL - 44 jobs

All
Controls Technician
Engineering Technician
Electrical Engineering Technician
Electrical Technician
Hvac Controls Technician
  • Access Control/CCTV Technician

    Teksystems 4.4company rating

    Controls technician job in Lake Mary, FL

    In this role, you will install, program, system start-up/check-out, certify, and customer train on assigned projects including small to large projects that vary in complexity As a Security Technician, you are a part of a dynamic team that allows you to grow as the company grows Installs, programs, test, repairs, and services a variety of non-routine systems and equipment which may include security, fire alarm & life safety, and/or building automation Colleague is key interface for the provision of technical support and training for the customer and as such is accountable for maximizing customer satisfaction Refers only the most complex issues to higher levels Reads basic blueprints, schematics, manuals, and other specifications to determine installation procedures; Interprets manuals, schematics, and wiring diagrams, and repairs equipment, utilizing knowledge of electronics and using standard test instruments and hand tools Operates systems to demonstrate equipment, commission new systems, analyze performance and identify malfunctions Writes a variety of non-routine programs for systems Acts as "our customer's best service provider" at all times thereby ensuring the company is the customer's first choice for service Consults with engineering personnel to resolve unusual problems in system operation, maintenance, and warranty work May advise management regarding customer satisfaction, product performance, installation techniques and standards as well as suggestions for product improvements Executes most of the technical aspects of multiple projects with varying timelines and budgets including programming, graphics development, start-up, certification testing, customer training, close-out documentation, and on-going technical support etc. Identifies potential project risks, communicates to appropriate parties and assist in the development and implementation of strategies to minimize impact and to control deviations from estimated costs and project deadlines Works closely with the Project Manager and/or Operations Manager and assists in the overall coordination of specific projects; makes recommendations regarding quality of work and potential changes in scope, and identifies ways to continuously improve customer satisfaction Using technical knowledge, skills and experience, acts as a mentor to less experienced staff May supervise workers in testing, tuning, and adjusting equipment to obtain optimum operating performance Performs other duties and responsibilities as requested or required Skills access control, cctv, project coordination, Troubleshooting, Install, Customer service, Cable, Hardware, Service, schematic, blueprint reading Top Skills Details access control,cctv,project coordination Additional Skills & Qualifications You have a passion for providing world-class service to customers, colleagues and communities You are a person of integrity with a commitment to growth, accountability and delivering results Exceptional customer focus and ability to work under pressure; ability to maintain awareness of and seek to meet the needs and wants of the customer without being prompted Solid technical skills and experience fire alarm systems, and/or electronic security systems Solid programming skills and proven ability to troubleshoot problems and look for solutions To be a self-starter and work well with minimal supervision Solid mechanical and electrical aptitude (e.g. works with a variety of hand and power tools such as drill, screwdriver, wire stripper, hacksaw, crimper) and ability to read blueprints and drawings; solid math skills (for some positions, this may include calculating area, velocity, resistance, voltage, etc.) Strong verbal, written and interpersonal communication skills Solid organizational skills and the ability to handle multiple projects simultaneously Advanced computer skills including familiarity with MS Office applications (Outlook, Word, Excel) and proficient in other relevant applications A valid driver's license with a clean driving record Ability to travel locally to jobsites on a regular basis Minimal overnight travel may be required Education: High School/GED or equivalent experience Minimum Experience: 3-5 years relevant Drive Not CDL Experience Level Intermediate Level Job Type & Location This is a Contract to Hire position based out of Lake Mary, FL. Pay and Benefits The pay range for this position is $30.00 - $40.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Lake Mary,FL. Application Deadline This position is anticipated to close on Jan 23, 2026. h4>About TEKsystems: We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
    $30-40 hourly 4d ago
  • Job icon imageJob icon image 2

    Looking for a job?

    Let Zippia find it for you.

  • Electro Mechanical Controls Technician - 3rd Shift (11pm-7am)

    Signature Brands LLC 3.8company rating

    Controls technician job in Ocala, FL

    Observes functioning of installed equipment to detect hazards, problems, and the need for service, repair and/or replacement of electrical, electronic and mechanical components. Reads and understands electronic and electrical schematics; draws sketches to clarify design details and functional criteria of electronic units. Assembles experimental circuitry of complete prototype models according to engineering instruction, technical manuals, and knowledge of electronic systems and components and their functions. Required to maintain backups of programs from all electrical devices. Understands and troubles solid-state motor drives, solid state temperature controllers, and computer-based controllers. Analyzes and interprets data from solid-state motor drives and controllers scope meters and other troubleshooting equipment. Requirements High School Diploma or GED. Flexibility required, including on call support. Proficiency in all Microsoft Office programs Knowledge and adherence to Lockout/Tagout procedures. Documented proficient of Allen Bradley plc's/controls/protocols platforms. Industry/technical school certification or equivalent work experience. (Controls/PLC) Must be able to operate: General hand tools. Various power tools such as, but not limited to, drill motors, saws all, band saw, hammer drill, power auger, pipe threading machine, etc. Shop Equipment: Horizontal band saw, drill press, belt sanders, grinders, vertical band saw, etc. Multimeter, test equipment Must be able to check newly installed equipment to evaluate system performance under actual operating conditions. Ability to identify a blown fuse, size a fuse and change a fuse. Ability to read/understand a voltmeter. Ability to determine if a motor is serviceable. Ability to identify voltage in a panel. Ability to wire and troubleshoot a motor starter. Ability to run conduit, size and pull wire. Must be able to obtain forklift and aerial lift platform licenses. Ability to lift 50 lbs. and climb ladders
    $47k-64k yearly est. Auto-Apply 60d+ ago
  • Access Control Technician

    Perimeter Solutions Group

    Controls technician job in Lake Helen, FL

    Perimeter Solutions Group Now Hiring! Access Control Technician Salary: $23 - $32/hr. DOE We are seeking skilled Access Control Technician(s) to join our team. The ideal candidate will be responsible for programming, installing, and maintaining electronic fences, gate operating systems, access control barriers, and related technologies. This role requires a detail-oriented individual with a strong technical background and excellent problem-solving skills. What You'll Do: Installation and Programming: Install, program, and configure electronic fences, gate operating systems, and access control barriers Maintenance and Troubleshooting: Perform regular maintenance and troubleshooting of access control systems to ensure optimal performance System Integration: Integrate access control systems with other security and building management systems Technical Support: Provide technical support and training to clients and end-users on the operation and maintenance of access control systems Documentation: Maintain accurate records of installations, maintenance, and repairs. Prepare detailed reports on system performance and issues Compliance: Ensure all installations and operations comply with relevant safety and security standards and regulations Customer Service: Respond to customer inquiries and service requests in a timely and professional manner What You'll Need: Education: High school diploma or equivalent; technical certification or associate degree in electronics, electrical engineering, or a related field preferred Experience: Minimum of 2 years of experience in access control systems, electronic security systems, or a related field Technical Skills: Proficiency in programming and configuring access control systems, electronic fences, and gate operating systems. Knowledge of networking and system integration Problem-Solving: Strong analytical and problem-solving skills with the ability to troubleshoot and resolve technical issues Communication: Excellent verbal and written communication skills. Ability to explain technical concepts to non-technical users Physical Requirements: Ability to lift and carry equipment, work in various environments, and perform tasks that may require climbing ladders or working in confined spaces Certifications: Relevant certifications such as Certified Access Control Technician (CACT) or similar are a plus Physical Demands The physical demands described here represent those that must be met by an employee to perform the essential functions of this position successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. While performing the duties of this position, the employee is regularly required to talk or hear. The employee frequently is required to use both hands and fingers, handle or feel objects, tools, or controls. The employee is required to stand for long periods of time; walk for extended periods of time; sit; squat; kneel and reach with hands and arms. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. Work Environment The work environment characteristics described here represent those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. While performing the duties of this Job, the employee regularly works with moving mechanical parts. The employee is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Benefits: Comprehensive medical coverage Dental and vision insurance 401(k) Paid time off and paid holidays Perimeter Solutions Group is the premier provider of fence, gates, automation/access controls, and rental barriers in the US with locations in Tampa, Lake Helen FL, McDonough GA, Savannah GA, Phoenix AZ and Glendale AZ. PSG is a rapidly growing and expanding platform, performing a over 1,000 installations annually including commercial, educational, military, governmental, and alternate energy properties throughout the southern U.S. Pay Range USD $23.00 - USD $32.00 /Hr.
    $23-32 hourly Auto-Apply 30d ago
  • Controls Technician

    Actalent

    Controls technician job in Lake Mary, FL

    Job Title: Control Systems TechnicianJob Description The Control Systems Technician is responsible for supporting engineering teams in the preparation, configuration, and testing of control systems that meet code, contract, and schedule requirements for projects in the Americas. This role primarily focuses on control systems related to large frame industrial gas turbines in simple cycle and/or combined cycle operation with steam turbines. Responsibilities may also include customer training and both remote and on-site support. Responsibilities + Design and review new design concepts and assist in developing new control systems. + Maintain and modify existing control systems. + Collaborate with design engineers, execution engineers, and other internal staff. + Develop procedures for testing the control system based on its configuration. + Configure Mitsubishi Control System, including HMI and database, using procedures and techniques. + Perform testing and inspection of control systems, including Factory Acceptance Tests (FATs). + Support field operations in performing on-site installation of control systems. + Provide start-up commissioning, operations, and/or troubleshooting support for equipment failures, determine root cause analysis, and implement solutions. + Prepare procedures and submit accurate reports regarding conditions, required actions, and obtained results. + Overnight travel (at least 25%) by land and/or air. + Perform other duties as required, such as packing equipment, staging equipment, and organizing test equipment/tools. Essential Skills + Strong understanding of mechanical and electronic elements of control systems, including familiarity with PLCs, DCS, HMIs, sensors, and actuators. + Proficient in the use of diagnostic tools and equipment, including signal generators, calibration meters, digital multimeters, and oscilloscopes. + Ability to read and interpret technical prints, schematics, wiring diagrams, and control system documentation. + Experience with control systems such as advanced process control (APC), distributed control systems (DCS), programmable logic controllers (PLC), OPC/Modbus, and SCADA applicable to power plants. Additional Skills & Qualifications + Associate's degree in electrical engineering technology, automation technology, or vocational training in a related field; or equivalent combination of education and experience in specific control disciplines. + Strong documentation skills and capability to understand circuit layouts, control panel designs, and system configurations. Work Environment The role involves up to 25% travel to sites and is based in a multi-disciplined engineering office. The Control System team consists of 11 full-time employees, 2 interns, and 6 remote resources from the Philippines. The work environment is dynamic, fostering collaboration across various engineering disciplines. Job Type & Location This is a Contract position based out of Lake Mary, FL. Pay and Benefits The pay range for this position is $25.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a hybrid position in Lake Mary,FL. Application Deadline This position is anticipated to close on Jan 19, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.
    $25-30 hourly 15d ago
  • Temp Control Technician (Florida Seasonal Worker)

    Duke Energy 4.4company rating

    Controls technician job in Crystal River, FL

    Important Application Submission Information In order to ensure your application is successfully received before the job posting expires, please submit your application by 11:59 PM on Thursday, January 22, 2026More than a career - a chance to make a difference in people's lives. Build an exciting, rewarding career with us - help us make a difference for millions of people every day. Consider joining the Duke Energy team, where you'll find a friendly work environment, opportunities for growth and development, recognition for your work, and competitive pay and benefits. THIS POSITION IS FOR TEMPORARY WORK AND OUTAGE WORK. Depending upon the desired qualifications of the successful candidate, the hiring manager may elect to fill this position at a higher level within the job hierarchy. Position will be located all through Florida. Responsibilities Perform Journeyman level duties in the installation, repair and maintenance for facility instrumentation and controls (I&C) as well as electrical systems (less than 600 volts). Perform corrective and preventive tasks. Calibrate and maintain instruments and control systems. Replace worn, damaged or failed equipment and components in support of facility operations. Competently utilize design drawings, electrical diagrams, instrumentation prints, and technical manuals. Competently utilize standard test and maintenance equipment, hand tools, and power tools to include meggers, clamp on amp meters, rotation indicators, and oscilloscopes. Have the ability to troubleshoot and repair lighting systems as well as complex control systems. Clearly document maintenance history. Provide support to Engineering with modifications or revisions to plant systems, equipment and/or components. Utilize a variety of computer software programs. Work with other crafts to support jobs requiring I&C technical assistance. Candidates will be required to demonstrate strong understanding of power plant dynamics, thermodynamic and heat transfer applications, and a thorough understanding of electrical theory and application Basic/Required Qualifications Minimum two years work experience in electronics and one year in pneumatics in power plant or related industry required. Computer literacy Desired Qualifications Associates degree in an instrumentation or related field preferred. Ability to acquire a strong understanding of power plant dynamics, thermodynamic and heat transfer applications Understanding of instrumentation and process control theory and application. Specific Requirements Must possess good dexterity Must not be impaired by colorblindness Must be able to adjust to work in hot, cold, damp, and dry environments Must be able to climb and work in high places; must be capable of working around rotating equipment and high pressure systems of power plants Must be able to work in confined spaces; must be capable of wearing personal protective equipment Must be able to perform all duties required for this position; must be able to demonstrate effective oral and written communication skills Must be able to work safely around and with energized circuit Must pass switching and tagging test Working Conditions Onsite Mobility Classification - Work will be performed at a company facility Travel Requirements 5-15%Relocation Assistance Provided (as applicable) NoRepresented/Union PositionMain IBEW Florida UnionVisa Sponsored PositionNoPlease note that in order to be considered for this position, you must possess all of the basic/required qualifications. Privacy Do Not Sell My Personal Information (CA) Terms of Use Accessibility
    $43k-53k yearly est. Auto-Apply 44d ago
  • HVAC Controls Technician

    Engineered Cooling Services 3.8company rating

    Controls technician job in Edgewood, FL

    Engineered Cooling Services (ECS), the Southeast's leading commercial HVAC service company is currently seeking highly talented individuals to join our growing team. ECS specializes in energy efficient commercial HVAC services. At ECS, our people are our most important resource. We continually strive to attract the best employees in the industry by offering competitive salary, advancement opportunities, excellent benefit packages and multi-level training opportunities. As an HVAC Controls Technician, you will be responsible for performing installation, start-up, commissioning, and troubleshooting / repair on commercial HVAC DDC controls. In this position you will establish and maintain positive relationships with both internal and external customers. ECS strives to provide the highest levels of performance, therefore training and support will be provided. Workplace Values The team member will be expected to operate in line with our core values which are: * Community * Excellence * Fairness * Growth * Loyalty Benefits The following is a brief overview of the company's benefits program: * Major health and dental insurance * Life insurance * Long term disability * 401K with company match * Paid sick, vacation and holidays (8) * Professional training and industry certification * Referral incentives * Continuing education reimbursement Requirements The following qualifications along with individuals previous work experience will be considered by the company when evaluating applicants: Knowledge of Siemens BACnet DDC Controls, Tridium AX & N4, Trane DDC Controls, and HVAC Mechanical Systems highly desirable. * 18 years of age or older * Valid driver's license with clean driving record * High school diploma or equivalent * 3 years of experience in the controls field * Advanced computer skills * Ability to troubleshoot and diagnose HVAC building control systems * Have and maintain a professional image * Flexibility to work overtime/weekends as required * Excellent communication skills
    $40k-58k yearly est. 5d ago
  • Engineering Technician IV - Statewide

    State of Florida 4.3company rating

    Controls technician job in Ocala, FL

    Requisition No: 860473 Agency: Department of Corrections Working Title: Engineering Technician IV - Statewide Pay Plan: Career Service Position Number: 70066666 Salary: $62,456.94 - $67,316.86 annually Posting Closing Date: 04/01/2026 Total Compensation Estimator Tool FLORIDA DEPARTMENT OF CORRECTIONS We Never Walk Alone Engineering Technician IV - WWTP This open competitive advertisement is for a Career Service position located at various Correctional Institutions in the Maintenance Department statewide. The mission of Facilities Management and Building Construction at the Florida Department of Corrections is to provide a safe, secure, and efficient environment for staff, inmates, and visitors. This is achieved through the effective management, maintenance, and construction of correctional facilities, ensuring they meet all regulatory standards and support the department's overall mission of public safety and rehabilitation. This position is not a telework position and is required to report to the FDC office in the area it serves. JOB DUTIES: This working position is responsible for the Waste/Wastewater Treatment Plant at a Correctional Institution both in operations and maintenance. This position also instructs inmates in the special skills necessary to operate a Water and Wastewater Treatment Plant through an apprentice on-the-job training program designed to develop experience and skills necessary to assume and fulfill the position of Operator of a water or sewer utility. * Operates and maintains Water Treatment and Wastewater Treatment Plants in compliance with DEP permits and regulations. * Conducts preventive maintenance for both plants, orders, and stocks necessary chemicals. * Repairs breakdowns at the operator level and troubleshoots specialized equipment such as compressors, pumps, air blowers, and chlorinators. * Cleans bar screens, grit chambers, settling, and sludge beds, and performs various water quality tests. * Prepares operational reports, maintains logs, and supervises inmates, preparing progress reports for their rehabilitation. BENEFITS: * Paid vacation, sick leave, and holidays. * Comprehensive health insurance and life insurance with accidental death and dismemberment benefits. * Supplemental Dental, Vision, Life, Disability and Hospitalization insurance. * Tuition-Free college courses. * Retirement Plans with the Florida Retirement System: * Pension Plan (Traditional Retirement Pension Plan) * Investment Plan (401(K)-Type Retirement Plan) * Deferred Retirement Option Program (Drop) * Deferred Compensation * Recently Retired? Beginning July 1, 2024, there is no longer a reemployment limitation; beginning with the 7th calendar month from the member's distribution date, there are no restrictions on working for an FRS employer. You will not be required to repay any prior distributions, and you may continue receiving distributions from the Investment Plan or Pension Plan without interruption. REQUIREMENTS: * A Class C Water and/ or Wastewater Treatment Plant Operator License or higher * A Valid Class E Driver's License Support of knowledge, skills, and abilities should be demonstrated on the application, in the education, in the work experience, in the work sample, in the interview and/or during reference checks. ADDITIONAL INFORMATION: BACKGROUND SCREENING REQUIREMENT The Florida Department of Corrections requires all job applicants and volunteers to pass a Level 2 background check as per Chapter 435, Florida Statutes. This check must be completed before they can start working or volunteering. EMPLOYMENT ELIGIBILITY The Florida Department of Corrections (FDC) only hires U.S. citizens and those authorized to work in the U.S. FDC uses E-Verify to confirm an employee's eligibility to work after completing the I-9 form. For online application issues, call the People First Service Center at **************. Applications will be accepted until 11:59 PM EST on the closing date. The State of Florida is an Equal Opportunity Employer/Affirmative Action Employer, and does not tolerate discrimination or violence in the workplace. Candidates requiring a reasonable accommodation, as defined by the Americans with Disabilities Act, must notify the agency hiring authority and/or People First Service Center (***************. Notification to the hiring authority must be made in advance to allow sufficient time to provide the accommodation. The State of Florida supports a Drug-Free workplace. All employees are subject to reasonable suspicion drug testing in accordance with Section 112.0455, F.S., Drug-Free Workplace Act. VETERANS' PREFERENCE. Pursuant to Chapter 295, Florida Statutes, candidates eligible for Veterans' Preference will receive preference in employment for Career Service vacancies and are encouraged to apply. Certain service members may be eligible to receive waivers for postsecondary educational requirements. Candidates claiming Veterans' Preference must attach supporting documentation with each submission that includes character of service (for example, DD Form 214 Member Copy #4) along with any other documentation as required by Rule 55A-7, Florida Administrative Code. Veterans' Preference documentation requirements are available by clicking here. All documentation is due by the close of the vacancy announcement. Location:
    $62.5k-67.3k yearly 60d+ ago
  • Manufacturing Electrical Technician

    Curis System LLC

    Controls technician job in Oviedo, FL

    Job DescriptionBenefits: 401(k) 401(k) matching Competitive salary Dental insurance Employee discounts Free uniforms Health insurance Opportunity for advancement Paid time off Training & development Vision insurance Wellness resources About CURIS System At CURIS System, we are redefining the future of biodecontamination. As a leading manufacturer of advanced biodecontamination devices and service solutions, our mission is to make the process safer, simpler, and smarterempowering researchers, pharmaceutical manufacturers, and healthcare professionals to focus on what matters most: saving lives and advancing science. Our patented technologies and service offerings are designed to eliminate contamination threats without exposing users to harmful chemicals or disrupting critical operations. Whether in a laboratory, cleanroom, hospital, or pharmaceutical facility, CURIS is the trusted partner for effective, efficient, and environmentally responsible biodecontamination. As a Manufacturing Electrical Technician you will play a key role in supporting CURIS Systems mission by delivering technical expertise, supporting customers,and driving innovation.. Youll work alongside a passionate team dedicated to improving global health and safety through cutting-edge biodecontamination solutions. The ideal candidate will have a strong background in electrical systems, hands-on experience with AC/DC power, and a meticulous attention to detail. Key Responsibilities Assemble and install electrical components in biodecontamination devices. Interpret and create wiring diagrams and electrical schematics. Perform wiring according to national and international standards. Work with AC power systems (110V and 220V) and DC power systems (12V and 24V). Solder electrical components with precision and care. Troubleshoot and repair electrical systems and components. Conduct quality checks to ensure compliance with safety and performance standards. Collaborate with engineering and production teams to improve processes and designs. In addition, this position requires proficiency with hand tools and the ability to pin in and out connectors.
    $39k-61k yearly est. 13d ago
  • Engineering Technician

    Captiveaire 4.4company rating

    Controls technician job in Groveland, FL

    *IMMEDIATE OPENINGS WITH GROWING COMPANY! Company Profile: CaptiveAire is the nation's leading manufacturer of commercial kitchen ventilation systems, and now provides a complete solution of fans, heaters, ductwork and HVAC equipment. For over 40 years, we've led the industry with innovative technologies, unmatched service, competitive pricing, and rapid lead times. Captive-Aire maintains a network of over 90 sales offices in the U.S. and Canada and six strategically located manufacturing plants in North Carolina, Oklahoma, Pennsylvania, California, Iowa, and Florida. Summary: This role will be working 100% on the manufacturing floor building product for a given production line. They are responsible to help run technical equipment and help accelerate and organize the production lines. This is a strong role for engineering graduates to get some experience with opportunities to grow within engineering roles in the plant. Primary Job Responsibilities: Hands on, working on our rapidly growing DOAS (Dedicated Outdoor Air System) line and other lines to help with production of our products Accurately complete quality and administrative documents Electrical and Electronic troubleshooting Inspecting Products Refrigerant Charging and Recovery Read Engineering Drawings and Wiring Diagrams Brazing skills needed; welding and soldering skills a plus Performing all work according to safety standards and procedures Ensuring workspace is clean, safe and in working order Excellent opportunity for growth into manufacturing and other engineering opportunities Qualifications: 2yr or 4yr technical degree in a mechanical or electrical oriented curriculum needed Entry level to 2yrs work experience Internship or other hands-on, manufacturing experience preferred Able to use power tools and electrical testing and measuring equipment Universal EPA Certification preferred HVAC related experience beneficial Ability to lift 50 pounds Able to read factory orders Must pass background check and drug screen Physical Requirements: Ability to work standing for 8 - 10 hours at a time Required to use ladder, forklift or other means to acquire parts for product assembly Able to use power & hand tools, as well as electrical testing and measuring equipment Ability to lift 35 to 50 pounds independently Benefits: Medical, dental and vision insurance Disability & life insurance based upon election of medical insurance Paid holidays, vacation, and sick days based upon tenure 401k with employer match Flexible spending account (FSA) Salary: Starting pay at $25/hr and monthly bonus based on productivity and profits. Captive-Aire Systems, Inc. is proud to be an equal opportunity workplace. We review applications for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, ancestry, citizenship, age, uniformed services, genetic information, physical or mental disability, medical condition, marital status, or any other basis prohibited by law. To qualify, applicants must be legally authorized to work in the United States. At this time we are not able to consider applicants that require sponsorship, now or in the future, for employment visa status. #ET #P1
    $25 hourly Auto-Apply 12d ago
  • Ford Diesel Engine Technician

    Peacock Ford

    Controls technician job in Maitland, FL

    We are seeking a Ford Certified Diesel Service Technician to join our team. The role of the Diesel Mechanic is to perform repairs and maintenance on heavy-duty and medium-duty diesel vehicles in a fast-paced environment. Successful candidates should be motivated and enthusiastic about learning. By working at a Ford dealership, you can be a part of a brand that honors the past, and is invested in the future. Join the Ford Family where we value service to each other and the world as much as to our customers! Benefits: Health, Medical and Dental 401K Plan with employer match Paid time off and vacation Growth opportunities Employee vehicle purchase plans Family owned and operated Long term job security Flexible Work Schedule Responsibilities Provide technical service to vehicles and equipment Read job order, observe and listen to vehicle in operation to resolve malfunction, and plan work procedures Follow checklists ensuring all critical parts are examined Examine protective guards, loose bolts, and specified safety devices on trucks, and adjust as needed Test-drive vehicles to ensure that they run smoothly Tag all warranty parts and returns to the parts department Attend training classes and keep tabs on factory technical bulletins Properly complete the service and/or repairs assigned by supervisor Complete all work according to the applicable safety requirements and published procedures Participate in, and utilize to the best of one's abilities, technical training as assigned by management Maintain your designated workspace in an organized and clean manner Ensure guest vehicles are returned as clean as they were prior to being serviced Show the utmost courtesy to all guests, visitors, and dealership personnel Make every effort to achieve the production objectives set by management Adhere to manufacturer's policies and procedures as they relate to labor operations, time, and repair order documentation when performing warranty repairs and torque specifications Any other duties as outlined by the Service Supervisor and or management Qualifications Ford Certification preferred Previous experience in a Ford dealership is a plus At least 1 year of Fleet or Dealership experience High school diploma or equivalent work experience required Teammate with a strong sense of dedication to the customer and service team Self-motivated and professional Possess own tools We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.
    $32k-57k yearly est. Auto-Apply 60d+ ago
  • Construction Surveillance Engineering Technician

    Bristol Alliance of Companies 4.5company rating

    Controls technician job in Bayport, FL

    Bristol Infrastructure Design Services, LLC is hiring multiple Construction Surveillance Engineering Technicians in several locations nationwide. The Construction Surveillance Engineering Technician (CSET) will provide technical services and expertise related to all phases of construction on a variety of projects within the area of responsibility. The position will support the client's Resident Officer in Charge of Construction (ROICC), or designee, for construction services such as construction inspection, quality assurance, monitoring safety and environmental compliance and contract administration. Major Responsibilities Specific tasks for the CSET include but are not limited to the following: Coordinate Requests from Construction Contractor. Coordinate request from the construction Contractor for outage requests, excavation permits, burn permits, haul routes and other similar items. This will require liaison with the ROICC and appropriate base personnel (Security, Public Works, Fire Department etc.) Coordinate field activities. CSET shall work with the construction contractor, Navy client customers, activity managers, maintenance and utility servers, Federal Fire departments, and Security Police so there is a seamless coordination of construction activities. Attend Meetings (Pre-Construction, Safety, Contractor Quality Control, Partnering Meetings, and others) and Conferences - The CSET shall take notes, provide information to the ROICC or the ROICC's representative at the following meetings, conferences, and briefings. Develop Quality Assurance Plans. Prepare Construction Representatives Reports (CCRs) The CSET shall assure that the quality control system of the Contractor is in compliance with contract documents and applicable documents. Prepare draft Contract Construction Compliance Notices (CCCNs) in cases where the CSET observed workmanship and/or materials not in compliance with construction contract documents/specifications or safety infractions. The CSET shall take and provide the ROICC complete progress, record, special construction, and completion photographs. Maintain Working Files. NAVFAC's Electronic Construction and Facility Support Contract Management System (eCMS) shall be used to manage electronic submittals and documents. Minimum Education/Experience A minimum of five (5) years of experience as a Quality Control Manager or Superintendent working for a General Contractor on NAVFAC or USACE projects, OR a minimum of ten (10) years of experience working as a Foreman in one or more of the following trades: carpentry, electrical, roofing, HVAC, plumbing, or concrete on commercial/industrial/military projects valued in excess of $5 million. A minimum of five (5) years of experience working as a Journeyman in one or more of the following trades: carpentry, electrical, roofing, HVAC, plumbing, or concrete. Residential experience does not qualify. Required Knowledge or Skills Specialized training for Construction Quality Verification or completed an equivalent course. Competent computer skills for network data entry. Proficiency in using computer software programs such as Microsoft Word, Excel, and Outlook, as well as Adobe Acrobat Professional. Ability to communicate in English effectively orally and in writing. Experience in maintaining official construction site records. Experience in conducting meetings to resolve problems on construction projects and briefing clients and management personnel. In depth knowledge of construction practices and workmanship, including experience in proper uses of construction materials and installation methods In depth experience interpreting construction drawings and specifications on construction projects. Experience in making materials take-offs for construction work. Ability and experience in the inspection of materials, workmanship and construction and installation of various systems within the inspector's area of expertise. Knowledge of safety practices in the construction industry, including a background of familiarity with USACE (EM-385-1-1) and OSHA safety requirements. Completed the 30 Hour OSHA Construction Training within the past 2 years. Must hold a certificate in USACE Construction Quality Management (CQM) for Contractors Training (maintain valid 5-year certificate) or obtain certification within 60 days of onboarding. U.S. Citizen. A valid driver's license. Physical Demands Average agility and dexterity. CSET will be required to perform duties that involve moderate walking over rough, uneven or slippery surfaces, recurring bending, crouching, stooping, stretching, climbing ladders, walking up and down several flights of stairs or similar activities, recurring lifting of moderately heavy objects less than 50 lbs. such as testing or measuring equipment, and regular visits to construction sites. Required to have close visual acuity to perform activities such as viewing a computer terminal and extensive reading. Specific physical requirements include, but are not limited to, climbing, balancing, stooping, kneeling, reaching, walking, lifting, grasping, feeling, talking, hearing and performing repetitive motions. The worker is subject to both inside and outside environmental conditions, noise sufficient to cause the worker to shout. The worker is subject to a variety of physical conditions - proximity to moving mechanical parts, moving vehicles, electric current, working on scaffolding and high places, exposure to high heat or exposure to chemicals. The worker may be required to wear a respirator. The worker may be frequently in close quarters, crawl spaces, shafts, manholes, small-enclosed rooms, small sewage and water line pipes, and other areas that could cause claustrophobia. The worker is subject to atmospheric conditions - fumes, odors, dusts, mist, gases or poor ventilation. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
    $31k-47k yearly est. 60d+ ago
  • SVTT & OHE Engineering Technician IV (4675)

    Three Saints Bay

    Controls technician job in Bayport, FL

    Job Code **4675** \# of Openings **1** Apply Now (**************************************************** Requisition?org=GATEWAYVENT&cws=55&rid=4675) **Ghostrock** , a subsidiary of Three Saints Bay, LLC, and a Federal Government Contractor industry leader, is seeking a **SVTT & OHE Engineering Technician IV** **Position Responsibilities:** + **_US Citizen_** + **_Only candidates currently possessing an Active Secret Clearance (or higher) will be considered for this position._** + High School Diploma or Equivalent. + Experience in the assessment and oversite of repair of U.S. Navy ships' Surface Vessel Torpedo Tubes & Ordnance Handling Equipment. + Experience with interpreting Equipment technical manuals, mechanical and electrical drawings. + A working knowledge of Microsoft Outlook, Word and Excel. + A working knowledge of Maintenance and Material Management (3M). + Experience at Regional Maintenance Centers (RMC) is advantageous. VEVRAA Federal Contractor Three Saints Bay, LLC and its subsidiaries offer a team-oriented working environment and the opportunity to work with exceptional, dedicated industry professionals. We offer our employees a comprehensive benefits package and the opportunity to take part in exciting projects with government and commercial clients, both domestic and international. We are an Equal Opportunity Employer. We invite resumes from all interested parties without regard to race, color, sex, sexual preference, religion, creed, national origin, age, genetic information, marital or veteran status, disability, or any other category protected by federal, state, or local law.
    $32k-57k yearly est. 60d+ ago
  • Engineering Technician - Electrical - Navy

    Supply Chain Management Inc.1.com (SCMI1 4.3company rating

    Controls technician job in Bayport, FL

    Job DescriptionSupply Chain Management Inc.1.com (SCMI1), ********************* has an exciting opportunity for an Engineering Technician VI with an Electrical Specialization with the United States Navy, Southeast Regional Maintenance Center (SERMC) in Mayport, FL. Please see the below requirements, and send you resume for immediate consideration. Experience required: Independently or leading a team of technicians in troubleshooting, repairing, testing US Navy Ship structural, mechanical, or electrical equipment/systems. Independently or leading a team accomplishing formal material condition assessments (TSRA, ICMP, INSURV) Communicating findings of above troubleshooting/assessments Experience or familiar with: MS Office Suite, NMD, eDFS, NSEDR, and TAAS-Info Key Experience: The experience required is a combination of mechanical and electrical disciplines is primarily electrical in nature. (a) Assessment and oversight of repairs on U.S. Navy ships' laundry and galley equipment, associated fire suppression systems and ventilation systems. (b) Interpreting naval engineering drawings and electrical diagrams. Powered by JazzHR TKE12noKOI
    $40k-55k yearly est. 13d ago
  • Engineering Technician - Electrical - Navy

    Scmi1

    Controls technician job in Bayport, FL

    Supply Chain Management Inc.1.com (SCMI1), ********************* has an exciting opportunity for an Engineering Technician VI with an Electrical Specialization with the United States Navy, Southeast Regional Maintenance Center (SERMC) in Mayport, FL. Please see the below requirements, and send you resume for immediate consideration. Experience required: Independently or leading a team of technicians in troubleshooting, repairing, testing US Navy Ship structural, mechanical, or electrical equipment/systems. Independently or leading a team accomplishing formal material condition assessments (TSRA, ICMP, INSURV) Communicating findings of above troubleshooting/assessments Experience or familiar with: MS Office Suite, NMD, eDFS, NSEDR, and TAAS-Info Key Experience: The experience required is a combination of mechanical and electrical disciplines is primarily electrical in nature. (a) Assessment and oversight of repairs on U.S. Navy ships' laundry and galley equipment, associated fire suppression systems and ventilation systems. (b) Interpreting naval engineering drawings and electrical diagrams.
    $39k-53k yearly est. Auto-Apply 42d ago
  • Electro Mechanical Controls Technician - 3rd Shift (11pm-7am)

    Signature Brands LLC 3.8company rating

    Controls technician job in Ocala, FL

    Observes functioning of installed equipment to detect hazards, problems, and the need for service, repair and/or replacement of electrical, electronic and mechanical components. Reads and understands electronic and electrical schematics; draws sketches to clarify design details and functional criteria of electronic units. Assembles experimental circuitry of complete prototype models according to engineering instruction, technical manuals, and knowledge of electronic systems and components and their functions. Required to maintain backups of programs from all electrical devices. Understands and troubles solid-state motor drives, solid state temperature controllers, and computer-based controllers. Analyzes and interprets data from solid-state motor drives and controllers scope meters and other troubleshooting equipment. Requirements High School Diploma or GED. Flexibility required, including on call support. Proficiency in all Microsoft Office programs Knowledge and adherence to Lockout/Tagout procedures. Documented proficient of Allen Bradley plc's/controls/protocols platforms. Industry/technical school certification or equivalent work experience. (Controls/PLC) Must be able to operate: General hand tools. Various power tools such as, but not limited to, drill motors, saws all, band saw, hammer drill, power auger, pipe threading machine, etc. Shop Equipment: Horizontal band saw, drill press, belt sanders, grinders, vertical band saw, etc. Multimeter, test equipment Must be able to check newly installed equipment to evaluate system performance under actual operating conditions. Ability to identify a blown fuse, size a fuse and change a fuse. Ability to read/understand a voltmeter. Ability to determine if a motor is serviceable. Ability to identify voltage in a panel. Ability to wire and troubleshoot a motor starter. Ability to run conduit, size and pull wire. Must be able to obtain forklift and aerial lift platform licenses. Ability to lift 50 lbs. and climb ladders
    $47k-64k yearly est. Auto-Apply 60d+ ago
  • Access Control Technician

    Perimeter Solutions Group

    Controls technician job in Lake Helen, FL

    Job Description Perimeter Solutions Group Now Hiring! Access Control Technician Salary: $23 - $32/hr. DOE We are seeking skilled Access Control Technician(s) to join our team. The ideal candidate will be responsible for programming, installing, and maintaining electronic fences, gate operating systems, access control barriers, and related technologies. This role requires a detail-oriented individual with a strong technical background and excellent problem-solving skills. What You'll Do: Installation and Programming: Install, program, and configure electronic fences, gate operating systems, and access control barriers Maintenance and Troubleshooting: Perform regular maintenance and troubleshooting of access control systems to ensure optimal performance System Integration: Integrate access control systems with other security and building management systems Technical Support: Provide technical support and training to clients and end-users on the operation and maintenance of access control systems Documentation: Maintain accurate records of installations, maintenance, and repairs. Prepare detailed reports on system performance and issues Compliance: Ensure all installations and operations comply with relevant safety and security standards and regulations Customer Service: Respond to customer inquiries and service requests in a timely and professional manner What You'll Need: Education: High school diploma or equivalent; technical certification or associate degree in electronics, electrical engineering, or a related field preferred Experience: Minimum of 2 years of experience in access control systems, electronic security systems, or a related field Technical Skills: Proficiency in programming and configuring access control systems, electronic fences, and gate operating systems. Knowledge of networking and system integration Problem-Solving: Strong analytical and problem-solving skills with the ability to troubleshoot and resolve technical issues Communication: Excellent verbal and written communication skills. Ability to explain technical concepts to non-technical users Physical Requirements: Ability to lift and carry equipment, work in various environments, and perform tasks that may require climbing ladders or working in confined spaces Certifications: Relevant certifications such as Certified Access Control Technician (CACT) or similar are a plus Physical Demands The physical demands described here represent those that must be met by an employee to perform the essential functions of this position successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. While performing the duties of this position, the employee is regularly required to talk or hear. The employee frequently is required to use both hands and fingers, handle or feel objects, tools, or controls. The employee is required to stand for long periods of time; walk for extended periods of time; sit; squat; kneel and reach with hands and arms. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. Work Environment The work environment characteristics described here represent those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. While performing the duties of this Job, the employee regularly works with moving mechanical parts. The employee is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Benefits: Comprehensive medical coverage Dental and vision insurance 401(k) Paid time off and paid holidays Perimeter Solutions Group is the premier provider of fence, gates, automation/access controls, and rental barriers in the US with locations in Tampa, Lake Helen FL, McDonough GA, Savannah GA, Phoenix AZ and Glendale AZ. PSG is a rapidly growing and expanding platform, performing a over 1,000 installations annually including commercial, educational, military, governmental, and alternate energy properties throughout the southern U.S.
    $23-32 hourly 5d ago
  • Engineering Technician IV - Statewide

    State of Florida 4.3company rating

    Controls technician job in Inverness, FL

    Requisition No: 860473 Agency: Department of Corrections Working Title: Engineering Technician IV - Statewide Pay Plan: Career Service Position Number: 70066666 Salary: $62,456.94 - $67,316.86 annually Posting Closing Date: 04/01/2026 Total Compensation Estimator Tool FLORIDA DEPARTMENT OF CORRECTIONS We Never Walk Alone Engineering Technician IV - WWTP This open competitive advertisement is for a Career Service position located at various Correctional Institutions in the Maintenance Department statewide. The mission of Facilities Management and Building Construction at the Florida Department of Corrections is to provide a safe, secure, and efficient environment for staff, inmates, and visitors. This is achieved through the effective management, maintenance, and construction of correctional facilities, ensuring they meet all regulatory standards and support the department's overall mission of public safety and rehabilitation. This position is not a telework position and is required to report to the FDC office in the area it serves. JOB DUTIES: This working position is responsible for the Waste/Wastewater Treatment Plant at a Correctional Institution both in operations and maintenance. This position also instructs inmates in the special skills necessary to operate a Water and Wastewater Treatment Plant through an apprentice on-the-job training program designed to develop experience and skills necessary to assume and fulfill the position of Operator of a water or sewer utility. * Operates and maintains Water Treatment and Wastewater Treatment Plants in compliance with DEP permits and regulations. * Conducts preventive maintenance for both plants, orders, and stocks necessary chemicals. * Repairs breakdowns at the operator level and troubleshoots specialized equipment such as compressors, pumps, air blowers, and chlorinators. * Cleans bar screens, grit chambers, settling, and sludge beds, and performs various water quality tests. * Prepares operational reports, maintains logs, and supervises inmates, preparing progress reports for their rehabilitation. BENEFITS: * Paid vacation, sick leave, and holidays. * Comprehensive health insurance and life insurance with accidental death and dismemberment benefits. * Supplemental Dental, Vision, Life, Disability and Hospitalization insurance. * Tuition-Free college courses. * Retirement Plans with the Florida Retirement System: * Pension Plan (Traditional Retirement Pension Plan) * Investment Plan (401(K)-Type Retirement Plan) * Deferred Retirement Option Program (Drop) * Deferred Compensation * Recently Retired? Beginning July 1, 2024, there is no longer a reemployment limitation; beginning with the 7th calendar month from the member's distribution date, there are no restrictions on working for an FRS employer. You will not be required to repay any prior distributions, and you may continue receiving distributions from the Investment Plan or Pension Plan without interruption. REQUIREMENTS: * A Class C Water and/ or Wastewater Treatment Plant Operator License or higher * A Valid Class E Driver's License Support of knowledge, skills, and abilities should be demonstrated on the application, in the education, in the work experience, in the work sample, in the interview and/or during reference checks. ADDITIONAL INFORMATION: BACKGROUND SCREENING REQUIREMENT The Florida Department of Corrections requires all job applicants and volunteers to pass a Level 2 background check as per Chapter 435, Florida Statutes. This check must be completed before they can start working or volunteering. EMPLOYMENT ELIGIBILITY The Florida Department of Corrections (FDC) only hires U.S. citizens and those authorized to work in the U.S. FDC uses E-Verify to confirm an employee's eligibility to work after completing the I-9 form. For online application issues, call the People First Service Center at **************. Applications will be accepted until 11:59 PM EST on the closing date. The State of Florida is an Equal Opportunity Employer/Affirmative Action Employer, and does not tolerate discrimination or violence in the workplace. Candidates requiring a reasonable accommodation, as defined by the Americans with Disabilities Act, must notify the agency hiring authority and/or People First Service Center (***************. Notification to the hiring authority must be made in advance to allow sufficient time to provide the accommodation. The State of Florida supports a Drug-Free workplace. All employees are subject to reasonable suspicion drug testing in accordance with Section 112.0455, F.S., Drug-Free Workplace Act. VETERANS' PREFERENCE. Pursuant to Chapter 295, Florida Statutes, candidates eligible for Veterans' Preference will receive preference in employment for Career Service vacancies and are encouraged to apply. Certain service members may be eligible to receive waivers for postsecondary educational requirements. Candidates claiming Veterans' Preference must attach supporting documentation with each submission that includes character of service (for example, DD Form 214 Member Copy #4) along with any other documentation as required by Rule 55A-7, Florida Administrative Code. Veterans' Preference documentation requirements are available by clicking here. All documentation is due by the close of the vacancy announcement. Location:
    $62.5k-67.3k yearly 60d+ ago
  • Manufacturing Electrical Technician

    Curis System

    Controls technician job in Oviedo, FL

    Benefits: 401(k) 401(k) matching Competitive salary Dental insurance Employee discounts Free uniforms Health insurance Opportunity for advancement Paid time off Training & development Vision insurance Wellness resources About CURIS System At CURIS System, we are redefining the future of biodecontamination. As a leading manufacturer of advanced biodecontamination devices and service solutions, our mission is to make the process safer, simpler, and smarter-empowering researchers, pharmaceutical manufacturers, and healthcare professionals to focus on what matters most: saving lives and advancing science. Our patented technologies and service offerings are designed to eliminate contamination threats without exposing users to harmful chemicals or disrupting critical operations. Whether in a laboratory, cleanroom, hospital, or pharmaceutical facility, CURIS is the trusted partner for effective, efficient, and environmentally responsible biodecontamination. As a Manufacturing Electrical Technician you will play a key role in supporting CURIS System's mission by delivering technical expertise, supporting customers,and driving innovation.. You'll work alongside a passionate team dedicated to improving global health and safety through cutting-edge biodecontamination solutions. The ideal candidate will have a strong background in electrical systems, hands-on experience with AC/DC power, and a meticulous attention to detail. Key Responsibilities · Assemble and install electrical components in biodecontamination devices. · Interpret and create wiring diagrams and electrical schematics. · Perform wiring according to national and international standards. · Work with AC power systems (110V and 220V) and DC power systems (12V and 24V). · Solder electrical components with precision and care. · Troubleshoot and repair electrical systems and components. · Conduct quality checks to ensure compliance with safety and performance standards. · Collaborate with engineering and production teams to improve processes and designs. In addition, this position requires proficiency with hand tools and the ability to pin in and out connectors. Compensation: $22.00 - $25.00 per hour Decontamination Equipment Welcome to CURIS System, the leading innovator in decontamination equipment designed to meet the rigorous demands of today's contamination control standards. Our pioneering hydrogen peroxide-based portable disinfection equipment provides high-level disinfection that can be effectively utilized in any environment without sacrificing power or reliability. Whether you're looking to address the needs of biosafety-level laboratories, cleanrooms, pharmaceutical manufacturing facilities, health-care facilities, or any industry requiring meticulous bio-decontamination, our solutions offer unmatched portability and efficacy. As experts in industrial decontamination, we ensure that our systems deliver consistently thorough treatments, helping maintain safety and a high-level of sterility assurance in an environment. At CURIS System, we understand the importance of reliable decontamination equipment in preventing cross-contamination and minimizing human error. Our advanced technology not only reduces the need for harmful or toxic chemicals but also includes comprehensive documentation capabilities, allowing users to record and track disinfection data. We blend cutting-edge technology with strategic processes, ensuring superior contamination control. Careers Interested in exploring career opportunities with CURIS System? As a global leader in decontamination technology, we continue to experience rapid growth and are always interested in speaking with new talent interested in joining our team. From administrative staff to engineering and research/development to sales and everything in between, we are always looking for people to join our journey in making a difference.
    $22-25 hourly Auto-Apply 60d+ ago
  • RAM/SEARAM Engineering Technician IV (4673)

    Three Saints Bay

    Controls technician job in Bayport, FL

    Job Code **4673** \# of Openings **1** Apply Now (**************************************************** Requisition?org=GATEWAYVENT&cws=55&rid=4673) **Ghostrock,** a subsidiary of Three Saints Bay, LLC, and a Federal Government Contractor industry leader, is seeking a **RAM/SEARAM Engineering Technician IV.** **Position Responsibilities:** + **_US Citizen_** + **_Only candidates currently possessing an Active Secret Clearance (or higher) will be considered for this position._** + High School Diploma or Equivalent. + At least 4 years of experience in the assessment and repair of shipboard Rolling Airframe Missile Systems. + Experience with interpreting Equipment technical manuals, mechanical and electrical drawings. + A working knowledge of Microsoft Outlook, Word and Excel. + A working knowledge of Maintenance and Material Management (3M). + Experience at Regional Maintenance Centers (RMC) is advantageous. VEVRAA Federal Contractor Three Saints Bay, LLC and its subsidiaries offer a team-oriented working environment and the opportunity to work with exceptional, dedicated industry professionals. We offer our employees a comprehensive benefits package and the opportunity to take part in exciting projects with government and commercial clients, both domestic and international. We are an Equal Opportunity Employer. We invite resumes from all interested parties without regard to race, color, sex, sexual preference, religion, creed, national origin, age, genetic information, marital or veteran status, disability, or any other category protected by federal, state, or local law.
    $32k-57k yearly est. 60d+ ago
  • Engineering Technician IV - Statewide

    State of Florida 4.3company rating

    Controls technician job in Homosassa, FL

    Requisition No: 860473 Agency: Department of Corrections Working Title: Engineering Technician IV - Statewide Pay Plan: Career Service Position Number: 70066666 Salary: $62,456.94 - $67,316.86 annually Posting Closing Date: 04/01/2026 Total Compensation Estimator Tool FLORIDA DEPARTMENT OF CORRECTIONS We Never Walk Alone Engineering Technician IV - WWTP This open competitive advertisement is for a Career Service position located at various Correctional Institutions in the Maintenance Department statewide. The mission of Facilities Management and Building Construction at the Florida Department of Corrections is to provide a safe, secure, and efficient environment for staff, inmates, and visitors. This is achieved through the effective management, maintenance, and construction of correctional facilities, ensuring they meet all regulatory standards and support the department's overall mission of public safety and rehabilitation. This position is not a telework position and is required to report to the FDC office in the area it serves. JOB DUTIES: This working position is responsible for the Waste/Wastewater Treatment Plant at a Correctional Institution both in operations and maintenance. This position also instructs inmates in the special skills necessary to operate a Water and Wastewater Treatment Plant through an apprentice on-the-job training program designed to develop experience and skills necessary to assume and fulfill the position of Operator of a water or sewer utility. * Operates and maintains Water Treatment and Wastewater Treatment Plants in compliance with DEP permits and regulations. * Conducts preventive maintenance for both plants, orders, and stocks necessary chemicals. * Repairs breakdowns at the operator level and troubleshoots specialized equipment such as compressors, pumps, air blowers, and chlorinators. * Cleans bar screens, grit chambers, settling, and sludge beds, and performs various water quality tests. * Prepares operational reports, maintains logs, and supervises inmates, preparing progress reports for their rehabilitation. BENEFITS: * Paid vacation, sick leave, and holidays. * Comprehensive health insurance and life insurance with accidental death and dismemberment benefits. * Supplemental Dental, Vision, Life, Disability and Hospitalization insurance. * Tuition-Free college courses. * Retirement Plans with the Florida Retirement System: * Pension Plan (Traditional Retirement Pension Plan) * Investment Plan (401(K)-Type Retirement Plan) * Deferred Retirement Option Program (Drop) * Deferred Compensation * Recently Retired? Beginning July 1, 2024, there is no longer a reemployment limitation; beginning with the 7th calendar month from the member's distribution date, there are no restrictions on working for an FRS employer. You will not be required to repay any prior distributions, and you may continue receiving distributions from the Investment Plan or Pension Plan without interruption. REQUIREMENTS: * A Class C Water and/ or Wastewater Treatment Plant Operator License or higher * A Valid Class E Driver's License Support of knowledge, skills, and abilities should be demonstrated on the application, in the education, in the work experience, in the work sample, in the interview and/or during reference checks. ADDITIONAL INFORMATION: BACKGROUND SCREENING REQUIREMENT The Florida Department of Corrections requires all job applicants and volunteers to pass a Level 2 background check as per Chapter 435, Florida Statutes. This check must be completed before they can start working or volunteering. EMPLOYMENT ELIGIBILITY The Florida Department of Corrections (FDC) only hires U.S. citizens and those authorized to work in the U.S. FDC uses E-Verify to confirm an employee's eligibility to work after completing the I-9 form. For online application issues, call the People First Service Center at **************. Applications will be accepted until 11:59 PM EST on the closing date. The State of Florida is an Equal Opportunity Employer/Affirmative Action Employer, and does not tolerate discrimination or violence in the workplace. Candidates requiring a reasonable accommodation, as defined by the Americans with Disabilities Act, must notify the agency hiring authority and/or People First Service Center (***************. Notification to the hiring authority must be made in advance to allow sufficient time to provide the accommodation. The State of Florida supports a Drug-Free workplace. All employees are subject to reasonable suspicion drug testing in accordance with Section 112.0455, F.S., Drug-Free Workplace Act. VETERANS' PREFERENCE. Pursuant to Chapter 295, Florida Statutes, candidates eligible for Veterans' Preference will receive preference in employment for Career Service vacancies and are encouraged to apply. Certain service members may be eligible to receive waivers for postsecondary educational requirements. Candidates claiming Veterans' Preference must attach supporting documentation with each submission that includes character of service (for example, DD Form 214 Member Copy #4) along with any other documentation as required by Rule 55A-7, Florida Administrative Code. Veterans' Preference documentation requirements are available by clicking here. All documentation is due by the close of the vacancy announcement. Location:
    $62.5k-67.3k yearly 60d+ ago

Learn more about controls technician jobs

How much does a controls technician earn in The Villages, FL?

The average controls technician in The Villages, FL earns between $31,000 and $72,000 annually. This compares to the national average controls technician range of $37,000 to $75,000.

Average controls technician salary in The Villages, FL

$47,000
Job type you want
Full Time
Part Time
Internship
Temporary