Controls technician jobs in Waco, TX - 25 jobs

Apply Medical Instrument Technician (Ultrasound) Department of Defense Military Treatment Facilities under DHA Apply Print Share * * * * Save * This job is open to * Requirements * How you will be evaluated * Required documents * How to apply About the Position: This position is with Carl R. Darnall Army Medical Center in Fort Cavazos, Tx. This is a Direct Hire Solicitation. A recruitment incentive may be authorized. Salary negotiation may be available for those candidates who are new to Federal service. Student Loan repayment may be authorized. Summary About the Position: This position is with Carl R. Darnall Army Medical Center in Fort Cavazos, Tx. This is a Direct Hire Solicitation. A recruitment incentive may be authorized. Salary negotiation may be available for those candidates who are new to Federal service. Student Loan repayment may be authorized. Overview Help Accepting applications Open & closing dates 01/09/2026 to 01/26/2026 Salary $61,722 to - $80,243 per year Pay scale & grade GS 9 Location 1 vacancy in the following location: Fort Hood, TX Remote job No Telework eligible No Travel Required Not required Relocation expenses reimbursed No Appointment type Permanent Work schedule Full-time Service Competitive Promotion potential None Job family (Series) * 0649 Medical Instrument Technician Supervisory status No Security clearance Not Required Drug test Yes Position sensitivity and risk Non-sensitive (NS)/Low Risk Trust determination process * Suitability/Fitness Financial disclosure No Bargaining unit status Yes Announcement number HSJW-26-12862070-DHA-R Control number 853824200 This job is open to Help The public U.S. Citizens, Nationals or those who owe allegiance to the U.S. Duties Help * Perform a wide variety of complex ultrasound examinations such as Abdominal, Renal, Pelvic, Obstetric, Carotid, Venous, Vascular, Testicular, Thyroid, Breast, and various Biopsies to aid in the diagnosis and treatment of disease or injury. * Independently perform scans which illustrate normal and abnormal anatomy. * Advise the radiologist of urgent preliminary diagnostic evaluations and notifies them of studies requiring their immediate attention while the patient is undergoing examination. * Use scanner to properly position probes and other equipment, fix point of entry, determine depth and direction of penetration and location within the body locate disease sites, identify position and functioning or response of organs, etc. * Conduct hands-on training and technical oversight of other technicians. * Prepare reports on examinations, equipment status and utilization, workload, supply status and consumption, and related matters. Requirements Help Conditions of employment * Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation. * A Personnel Security Investigation is required. * This position has specific initial background investigation and periodic re-verification requirements since its duties require interaction with children and youth under the age of eighteen (18) years of age on a recurring basis. * Selectees will be required to sign a statement (Condition of Employment) consenting to seasonal influenza vaccinations or must provide a recognized exemption. * This position is a Testing Designated Position subject to pre-employment screening and random drug testing. Selectees will be required to consent to participation in random drug urinalysis testing. * A pre-placement medical examination is required. * Immunization screening is required. Hepatitis B immunization is required for all positions with direct patient contact. Applicants may be required to show proof of other immunizations depending on the type of position. * This position may require the incumbent to work during irregular work hours which may include evenings, weekends, holidays, and/or varying work schedules. * This position may include shift work (evenings, weekends, holidays). Qualifications Who May Apply: US Citizens In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Specialized Experience: One year of specialized experience which includes performing a variety of ultrasound examinations, setting up or maintaining ultrasound equipment, and educating patients or staff. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-07). OR Education: Two full years of graduate level education or a master's degree in a field directly related to the work of the position, such as Ultrasound or Sonography. OR Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the first year (total semester hours minus 18) by 9. Add the two percentages. The total percentage must equal at least 100 percent to qualify. Education FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: ************************************************************************** Additional information * Male applicants born after December 31, 1959 must complete a Pre-Employment Certification Statement for Selective Service Registration. * You will be required to provide proof of U.S. Citizenship. * One year trial/probationary period may be required. * Direct Deposit of Pay is required. * Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees. * Multiple positions may be filled from this announcement. * Salary includes applicable locality pay or Local Market Supplement. * If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet. * Payment of Permanent Change of Station (PCS) costs is not authorized, based on a determination that a PCS move is not in the Government interest. * Position may be designated as Inclement Weather Essential. The incumbent must make every attempt to report for work on time and/or remain on duty during severe weather conditions. * Position may be designated as Mission Essential. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help Review our benefits How you will be evaluated You will be evaluated for this job based on how well you meet the qualifications above. Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility. If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position. Veterans and Military Spouses will be considered along with all other candidates. Benefits Help Review our benefits Required documents Required Documents Help The documents you are required to submit vary based on whether or not you are eligible for preference in federal employment. A complete description of preference categories and the associated required documents is in the Applicant Checklist for Public Announcements. As described above, your complete application includes your resume, your responses to the online questionnaire, and documents which prove your eligibility to apply. If you fail to provide these documents, you will be marked as having an incomplete application package and you will not be considered any further. 1. Your resume: * Your resume must be two pages or less and must support the specialized experience described in this announcement. Resumes exceeding two pages will be removed from consideration. * For each relevant work experience, make sure you include the employer's name, job title, start and end dates (include month and year), for qualifications purposes, the number of hours worked per week, and a brief description that show you can perform the tasks at the required level listed in the job announcement. If your resume does not contain this information, your application may be marked as incomplete, and you may not receive consideration for this position. * Use plain language. Avoid using acronyms and terms that are not easily understood. The hiring agency will not make assumptions about what's in your resume. * If your resume includes a photograph or other inappropriate material or content, it will not be used to make eligibility and qualification determinations, and you may not be considered for this vacancy. * For additional information, to include formatting tips, see: What to include in your resume. 2. Other supporting documents: * Cover Letter, optional * Most recent Performance Appraisal, if applicable * Transcripts: This position has an individual occupational requirement and/or allows for substitution of education for experience. If you meet this requirement based on education you MUST submit a copy of your transcript with your application package or you will be rated ineligible. See: Transcripts and Licenses. NOTE: Documents submitted as part of the application package, to include supplemental documents, may be shared beyond the Human Resources Office. Some supplemental documents such as military orders and marriage certificates may contain personal information for someone other than you. You may sanitize these documents to remove another person's personal information before you submit your application. You may be asked to provide an un-sanitized version of the documents if you are selected to confirm your eligibility. If you are relying on your education to meet qualification requirements: Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education. Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating. How to Apply Help To apply for this position, you must complete the online questionnaire and submit the documentation specified in the Required Documents section below. * The complete application package must be submitted by 11:59 PM (EST) on 01/26/2026 to receive consideration. * To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application (********************************************************** * Follow the prompts to select your resume and/or other supporting documents to be included with your application package. As a reminder, your resume must be two pages or less and must support the specialized experience described in this announcement. Resumes exceeding two pages will be removed from consideration. For additional information, refer to the 'Required Documents' section. * You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process. * After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process. * You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application. Your resume selected in USAJOBS will be included, but you must re-select other documents from your USAJOBS account or your application may be incomplete. * It is your responsibility to verify that your application package (resume, supporting documents, and responses to the questionnaire) is complete, accurate, and submitted by the closing date. Uploaded documents may take up to one hour to clear the virus scan. * Additional information on how to complete the online application process and submit your online application may be found on the USA Staffing Applicant Resource Center. To verify the status of your application, log into your USAJOBS account (****************************************************** all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: *************************************************** Agency contact information Army Applicant Help Desk Website ************************************************* Address JT-DD83DC WEST DHN - DARNALL DO NOT USE Fort Cavazos, TX 76544 US Next steps If you provided an email address, you will receive an email message acknowledging receipt of your application. Your application package will be used to determine your eligibility, qualifications, and quality ranking for this position. If you are determined to be ineligible or not qualified, your application will receive no further consideration. Fair and transparent The Federal hiring process is set up to be fair and transparent. Please read the following guidance. Criminal history inquiries Equal Employment Opportunity (EEO) Policy Financial suitability New employee probationary period Privacy Act Reasonable accommodation policy Selective Service Signature and false statements Social security number request Required Documents Help The documents you are required to submit vary based on whether or not you are eligible for preference in federal employment. A complete description of preference categories and the associated required documents is in the Applicant Checklist for Public Announcements. As described above, your complete application includes your resume, your responses to the online questionnaire, and documents which prove your eligibility to apply. If you fail to provide these documents, you will be marked as having an incomplete application package and you will not be considered any further. 1. Your resume: * Your resume must be two pages or less and must support the specialized experience described in this announcement. Resumes exceeding two pages will be removed from consideration. * For each relevant work experience, make sure you include the employer's name, job title, start and end dates (include month and year), for qualifications purposes, the number of hours worked per week, and a brief description that show you can perform the tasks at the required level listed in the job announcement. If your resume does not contain this information, your application may be marked as incomplete, and you may not receive consideration for this position. * Use plain language. Avoid using acronyms and terms that are not easily understood. The hiring agency will not make assumptions about what's in your resume. * If your resume includes a photograph or other inappropriate material or content, it will not be used to make eligibility and qualification determinations, and you may not be considered for this vacancy. * For additional information, to include formatting tips, see: What to include in your resume. 2. Other supporting documents: * Cover Letter, optional * Most recent Performance Appraisal, if applicable * Transcripts: This position has an individual occupational requirement and/or allows for substitution of education for experience. If you meet this requirement based on education you MUST submit a copy of your transcript with your application package or you will be rated ineligible. See: Transcripts and Licenses. NOTE: Documents submitted as part of the application package, to include supplemental documents, may be shared beyond the Human Resources Office. Some supplemental documents such as military orders and marriage certificates may contain personal information for someone other than you. You may sanitize these documents to remove another person's personal information before you submit your application. You may be asked to provide an un-sanitized version of the documents if you are selected to confirm your eligibility. If you are relying on your education to meet qualification requirements: Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education. Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.

Activities/Responsibilities/Duties: Assists with the following: DC Trench DC Feeder Install MV Trench MV Cable Install CAB Transition Conduit MV Conduit Install Fiber Install Inverter DC Termination Transformer/Sectionalizer MV Termination DC Splice MV Splice MV Riser Termination SCADA Equipment Install CAB Install Combiner Box Install Combiner Box Termination DC Wire Install Module Installation Wire Management Labeling Fiber Termination LOTO IR Scanning Survey/As-Built Skills/Abilities: Able to lift 50+ (?) pound materials, maneuvering them into their proper places Able to conduct repetitive actions, such as stooping, bending, pushing, pulling, and reaching Able to stand or walk for extended periods of time Able to follow precise instruction and receive feedback Strong teamwork skills and ability to work well with others, including colleagues and supervisors Experience working on solar construction projects preferred Education: GED or equivalent education preferred Please beware of scams. *Signal Energy (*Note: or AHV, if relevant) does not charge any applicant for their participation in the recruitment process, at any time

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris Technologies is the Trusted Disruptor in the defense industry. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Engineering Technician D - Aircraft Mechanical Assembly & Installation Job Code: 31776 Job Location: Waco, TX (Onsite) Job Schedule: 4/10; ability to work any shift Job Description: The Aircraft Mechanical Assembly and Installation Technician is responsible for the flat pattern lay out, fabrication, and installation of mechanical piece parts and assemblies on aircraft in accordance with drawings, technical manuals, or other written instructions to complete assigned work. Essential Functions: + Ability to obtain and maintain a DoD security clearance. + Performing sheet metal fabrication modifications, mechanical/electrical modifications/installs, aircraft inspections or repairs, sometimes in confined spaces. + Willingness and ability to learn Electrical Assembly and Installation. + A full understanding of technical drawings and aircraft maintenance manuals. + Familiarity with general industry standards on quality expectations. + Knowledge of general aircraft sheet metal fabrication and assembly principles and techniques. + Ability to lead projects with minimal oversight. + Ability to be certified to operate vehicles such as forklifts, scissor lifts, and boom lifts. + Ability to lift and/or move up to 50 pounds. + Willingness and ability to work overtime, any shift, and weekends as required to meet business objectives. + Willingness and ability to travel up to 50% as required. Qualifications: + Requires a High School Diploma or equivalent and a minimum of 8 years of prior relevant experience or 2 years post-Secondary/Associates Degree with a minimum of 4 years of prior related experience. + Minimum of 4 years aircraft mechanical assembly and installation experience. + Must be able to pass pre-employment background, drug, & medical screening; subject to FAA requirements and random substance abuse screening. + Must be a U.S. citizen. Preferred Additional Skills: + Active TS/SCI security clearance. + Proficient with Microft Office (Word, Excel, PowerPoint). + A&P license. + Effective communication skills. + Strong team member. + Proven ability to work independently to complete tasks with minimal supervision. Here's what makes Waco an exceptional place to live and work: + Lower Cost of Living: Your dollar goes further in Waco. Affordable housing and overall living costs allow for a higher quality of life. + Growing City With Modern Amenities: Waco offers a vibrant mix of dining, entertainment, and outdoor activities. From Magnolia Market at the Silos to Cameron Park and the Brazos River, there's always something to explore. + Central Location: Situated between Dallas and Austin, Waco provides small-city comfort with big-city access-perfect for weekend trips or family activities. + Strong Community & Family-Friendly: Safe neighborhoods, excellent schools, and a welcoming community make Waco an ideal place to put down roots. + Expanding Tech & Industry Hub: Waco is experiencing rapid growth, attracting new businesses and creating a thriving environment for engineering and technology professionals. #LI-AS1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English (******************************************************************************************** or Spanish (******************************************************************************************** . For information regarding your Right To Work, please click here for English (****************************************************************************************** or Spanish (******************************************************************************************** .

Job Description The mission of Speechify is to make sure that reading is never a barrier to learning. Over 50 million people use Speechify's text-to-speech products to turn whatever they're reading - PDFs, books, Google Docs, news articles, websites - into audio, so they can read faster, read more, and remember more. Speechify's text-to-speech reading products include its iOS app, Android App, Mac App, Chrome Extension, and Web App. Google recently named Speechify the Chrome Extension of the Year and Apple named Speechify its App of the Day. Today, nearly 200 people around the globe work on Speechify in a 100% distributed setting - Speechify has no office. These include frontend and backend engineers, AI research scientists, and others from Amazon, Microsoft, and Google, leading PhD programs like Stanford, high growth startups like Stripe, Vercel, Bolt, and many founders of their own companies. This is a key role and ideal for someone who thinks strategically, enjoys fast-paced environments, passionate about making product decisions, and has experience building great user experiences that delight users. We are a flat organization that allows anyone to become a leader by showing excellent technical skills and delivering results consistently and fast. Work ethic, solid communication skills, and obsession with winning are paramount. Our interview process involves several technical interviews and we aim to complete them within 1 week. What You'll Do Actively ship production code to the web products Work closely with your dedicated product team Participate in product discussions to shape the product roadmap Have the opportunity to work on new and exciting features that will impact millions of lives An Ideal Candidate Should Have Experience. You've built and ship products that have scaled to thousands or millions of users Customer obsession. You are passionate about the field and have the desire to build high quality product that serves customer needs Speed. You work quickly to generate ideas and know how to decide which things can ship now and what things need time Focus. We're a high-growth startup with a busy, remote team. You know how and when to engage or be heads down Collaboration. You know how to inspire, play, and negotiate with opinionated designers, marketers, and PMs Tech Stack: Vanilla JS, ReactJS, Redux, Firebase, Typescript What We Offer A fast-growing environment where you can help shape the culture An entrepreneurial crew that supports risk, intuition, and hustle A hands-off approach so you can focus and do your best work The opportunity to make an impact in a transformative industry A competitive salary, a collegiate atmosphere, and a commitment to building a great asynchronous culture The United States Based Salary range for this role is: 140,000-200,000 USD/Year + Bonus + Stock depending on experience Think you're a good fit for this job? Tell us more about yourself and why you're interested in the role when you apply. And don't forget to include links to your portfolio and LinkedIn. Not looking but know someone who would make a great fit? Refer them! Speechify is committed to a diverse and inclusive workplace. Speechify does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.

The Medical Instrument Technician, Echocardiography will independently perform routine and complex transthoracic echocardiographic services. The incumbent will perform routine and complex transthoracic echocardiograms, stress echocardiograms, and contract echocardiograms. They will assist physicians with transesophageal echocardiogram and other procedures requiring echocardiography. Recruitment/Relocation incentives may be authorized for a highly qualified candidate. Total-Rewards-of-an-Allied-Health-VA-Career-Brochure.pdf Echocardiography technicians at this level identify and record routine and complex anomalies indicative of disease, injury, or other medically-significant conditions through ultrasound imaging and recordings of Doppler. They incorporate patient symptoms and conditions to develop a comprehensive diagnostic examination, consisting of two-dimensional, doppler, and M-mode ultrasound. They change studies to accommodate such variables as limited patient mobility, variation in physical condition or dimension of the patient, presence of prosthesis or foreign objects, and ultrasonic response of different body parts. They obtain measurements of cardiac structures and doppler flow signals and calculate parameters such as ejection fraction, valve area, left atrial volume index, cardiac output, diastolic filling parameters, RVSP, and other variables on a comprehensive basis. They also perform advanced measurements and calculations as needed by the interpreting physician for a more complete echocardiographic study. Work Schedule: Monday-Friday, 7:00am - 3:30pm, 7:30am - 4:00pm, or 8:00am - 4:30pm Telework: Not Available Virtual: This is not a virtual position. Functional Statement #: 0000/Medical Instrument Technician - Echocardiography Relocation/Recruitment Incentives: Authorized for highly qualified candidate Permanent Change of Station (PCS): Not Authorized PCS Appraised Value Offer (AVO): Not Authorized Financial Disclosure Report: Not required Pay: Competitive salary and regular salary increases, When setting pay, a higher step rate of the appropriate grade may be determined after consideration of existing pay, higher or unique qualifications, or special needs of the VA (Above Minimum Rate of the Grade). Paid Time Off: 37-50 days of annual paid time offer per year (13-26 days of annual leave, 13 days of sick leave, 11 paid Federal holidays per year) Selected applicants may qualify for credit toward annual leave accrual, based on prior [work experience] or military service experience. Parental Leave: After 12 months of employment, up to 12 weeks of paid parental leave in connection with the birth, adoption, or foster care placement of a child. Child Care Subsidy: After 60 days of employment, full time employees with a total family income below $144,000 may be eligible for a childcare subsidy up to 25% of total eligible childcare costs for eligible children up to the monthly maximum of $416.66. Retirement: Traditional federal pension (5 years vesting) and federal 401K with up to 5% in contributions by VA Insurance: Federal health/vision/dental/term life/long-term care (many federal insurance programs can be carried into retirement)

With a history dating back to 1941, Brazos Electric has grown and evolved over the years to serve the changing needs of our member-owner co-ops and their customers throughout Texas. Brazos Electric Cooperative provides transmission and distribution services for 16 Texas electric co-ops whose service territory extends across 68 counties from the Texas Panhandle to Houston. Those 16 co-ops are the member-owners of Brazos Electric, and our board of directors is comprised of one representative from each of our member-owners. Brazos Electric offers competitive pay and benefits for you and your family, a welcoming culture, and the opportunity to advance. Search our current career opportunities: ************************************* Job Skills / Requirements Field Communications & SCADA Technician Brazos Electric Power Cooperative- Waco, TX Powering Communities. Empowering Careers. Brazos Electric is seeking a skilled and motivated Field Communications & SCADA Technician to join our team supporting critical transmission system technology across our cooperative. What You'll Do • Install, commission, test, and maintain SCADA, EMS, and networking equipment including RTUs, IEDs, routers, switches, AMI/DA systems, and substation automation platforms. • Support and repair telecommunications systems such as Ethernet and TDM microwave, GPRS, two-way radio, power line carrier, and unlicensed wireless. • Install and maintain fiber-optic systems, power line carrier equipment, line tuners, and protective relaying circuits. • Perform maintenance at communications sites-generators, ATS units, battery banks, HVAC, security systems, dehydrators, and tower lighting. • Keep firmware and software updated across SCADA, microwave, network, and testing devices. • Prepare and maintain test reports, configuration files, and field redline drawings. • Ensure compliance with FAA, FCC, and NERC maintenance and documentation requirements. • Participate in a 24/7 on-call rotation for emergency and unscheduled system support. • Work closely with engineering, operations, member cooperatives, vendors, and circuit providers. What You'll Bring • High School Diploma or equivalent. • Associate degree in electronics, related technology, or equivalent military electronics training preferred. • Networking certification such as CompTia Network+, CCNA, JNCIA or NRS1 is a plus. • Strong troubleshooting skills and ability to work independently. • Commitment to safety, reliability, and excellent service. Why Brazos Electric? Join a cooperative dedicated to innovation, reliability, and the communities we serve. Work with advanced technology, supportive colleagues, and a team that values professional growth. To apply, visit our careers page: ************************************* Brazos Electric Power Cooperative, Inc. is proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected veteran status Additional Information / Benefits Brazos Electric Power Cooperative, Inc. is an Equal Opportunity Provider and Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or other protected status Benefits: Medical Insurance, Life Insurance, Dental Insurance, Vision Insurance, Paid Vacation, Paid Sick Days, Paid Holidays, Short Term Disability, Long Term Disability, 401K/403b Plan, Educational Assistance This is a Full-Time position

Grounds Technician/Mechanic -3070 (Grounds Department) Waco, TX, United States of America $18.00 - $22.00 Apply Now Apply Now HES is a premier national provider of facilities management services focused 100% on educational institutions. Headquartered in Knoxville, Tennessee, HES builds best-in-class programs for custodial, maintenance, grounds, and landscaping services. With hundreds of years of combined facilities experience, the HES leadership team is comprised of results-oriented, hands-on executives and facilities experts who give school facilities their full attention. Whether for a grounds and landscaping program, custodial services, or maintenance solutions, HES will change the way you look at facilities management. Founded in 1972, HES has a proven track record of working successfully and exclusively in the educational environment, maintaining a singular focus on facilities management, undistracted by competing priorities. HES has earned the trust of over 150 education partners across 29 states. We employ 13,000 dedicated team members and maintain more than 200 million square feet daily. Job Skills / Requirements 1st Shift (7am-3:30pm) * Monday-Friday SUMMARY: Maintain the grounds fleet (mowers, UTV's, etc) at client site in Waco, TX. Supervise and perform daily, specialty tasks such as scheduling repairs, maintenance, operations and performing PM's. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following (other duties may be assigned): The primary responsibility of the Mechanic is to direct daily maintenance related to the grounds equipment. Essential aspects of this position include: * Plans, oversees and performs equipment maintenance operations. * Performs routine, vehicle and equipment maintenance * Plans and monitors preventive maintenance program for all grounds related equipment. * Test mechanical products and equipment after repair or assembly to ensure proper performance and compliance with manufacturers specifications * Prepare and maintain accurate records of parts, services and labor to track costs * Keep a daily log to notate issues and progress during the year. * Keep all logs up to date. * Perform safety training. * Required to follow all company, client, and regulatory agency policies. QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE: 2+ years of experience in performing grounds equipment maintenance LANGUAGE SKILLS: Ability to read and comprehend simple instructions, short correspondence, and memos, Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees or the organization. MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divides in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. REASONING ABILITY: Ability to apply commonsense understanding to conduct detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. CERTIFICATES, LICENSES, REGISTRATIONS: Must have a valid state Driver's License. PHYSICAL DEMANDS: The physical requirements for this job could be lifting up to 90 pounds. Reasonable accommodations may be made to enable individual with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk sit; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; talk or hear; and taste or smell. The employee is occasionally required to use hands to finger, handle, or feel objects, tools, or controls. The employee must regularly lift and/or move up to 25 pounds, frequently lift and/or move to 50 pounds, and occasionally lift and/or move up to 100 pounds. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works near moving mechanical parts and is regularly exposed to risk of electrical shock. The employee frequently works in high, precarious places and in outside weather conditions and is frequently exposed to wet and/or humid conditions, fumes or airborne particles, and toxic or caustic chemicals. The noise level in the work environment is usually moderate. #Respect20251 Additional Information / Benefits Optional daily pay Benefits: Medical Insurance, Dental Insurance, Vision Insurance, Paid Vacation This is a Full-Time position 1st Shift. Apply Now Apply Now

HES is a premier national provider of facilities management services focused 100% on educational institutions. Headquartered in Knoxville, Tennessee, HES builds best-in-class programs for custodial, maintenance, grounds, and landscaping services. With hundreds of years of combined facilities experience, the HES leadership team is comprised of results-oriented, hands-on executives and facilities experts who give school facilities their full attention. Whether for a grounds and landscaping program, custodial services, or maintenance solutions, HES will change the way you look at facilities management. Founded in 1972, HES has a proven track record of working successfully and exclusively in the educational environment, maintaining a singular focus on facilities management, undistracted by competing priorities. HES has earned the trust of over 150 education partners across 29 states. We employ 13,000 dedicated team members and maintain more than 200 million square feet daily. Job Skills / Requirements 1st Shift (7am-3:30pm) Monday-Friday SUMMARY: Maintain the grounds fleet (mowers, UTV's, etc) at client site in Waco, TX. Supervise and perform daily, specialty tasks such as scheduling repairs, maintenance, operations and performing PM's. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following (other duties may be assigned): The primary responsibility of the Mechanic is to direct daily maintenance related to the grounds equipment. Essential aspects of this position include: Plans, oversees and performs equipment maintenance operations. Performs routine, vehicle and equipment maintenance Plans and monitors preventive maintenance program for all grounds related equipment. Test mechanical products and equipment after repair or assembly to ensure proper performance and compliance with manufacturers specifications Prepare and maintain accurate records of parts, services and labor to track costs Keep a daily log to notate issues and progress during the year. Keep all logs up to date. Perform safety training. Required to follow all company, client, and regulatory agency policies. QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE: 2+ years of experience in performing grounds equipment maintenance LANGUAGE SKILLS: Ability to read and comprehend simple instructions, short correspondence, and memos, Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees or the organization. MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divides in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. REASONING ABILITY: Ability to apply commonsense understanding to conduct detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. CERTIFICATES, LICENSES, REGISTRATIONS: Must have a valid state Driver's License. PHYSICAL DEMANDS: The physical requirements for this job could be lifting up to 90 pounds. Reasonable accommodations may be made to enable individual with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk sit; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; talk or hear; and taste or smell. The employee is occasionally required to use hands to finger, handle, or feel objects, tools, or controls. The employee must regularly lift and/or move up to 25 pounds, frequently lift and/or move to 50 pounds, and occasionally lift and/or move up to 100 pounds. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works near moving mechanical parts and is regularly exposed to risk of electrical shock. The employee frequently works in high, precarious places and in outside weather conditions and is frequently exposed to wet and/or humid conditions, fumes or airborne particles, and toxic or caustic chemicals. The noise level in the work environment is usually moderate. #Respect20251 Additional Information / Benefits Optional daily pay Benefits: Medical Insurance, Dental Insurance, Vision Insurance, Paid Vacation This is a Full-Time position 1st Shift.

Get to know East Penn! At East Penn, our employees are our culture; our employees will always be the heart of the company. We are a private, family-owned enterprise committed to cultivating an atmosphere that honors the contributions of everyone. We want our employees to have long-term careers, and many do. Almost 40% of our workforce has over a decade of service. Our open-door management policy, comprehensive benefits package, annual bonus program for all, and career advancement opportunities are just some of the ways we show our employees how incredibly valued they are. Our hiring process may use artificial intelligence (AI) tools to help in the initial review of applications by identifying candidates whose qualifications best match job requirements. These tools do not make hiring decisions. All final hiring decisions regarding interviews and employment are made by our employee recruiting and hiring teams. East Penn is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. EOE/VEVRAA Overview East Penn Mfg is a leader in energy storage solutions known for innovation, quality, and a commitment to excellence. We are currently seeking experienced and detail-oriented Electro-Mechanical Technician to join our team. #DekaCareers Wages starting at $35 $5,000 Sign On/Retention Bonus Opportunities primarily available on 2 nd and 3 rd shift. Consistent schedule and guaranteed 40 hours with opportunity for overtime. Responsibilities Position Summary: The Electro-Mechanical Technician will be responsible for the assembly, installation, troubleshooting, maintenance, and repair of mechanical and electrical systems in machinery, equipment, and production lines. This role requires a strong understanding of both mechanical components and electrical systems. Key Responsibilities: Assemble and install electrical and mechanical components according to schematics, blueprints, or technical drawings. Diagnose and troubleshoot mechanical and electrical issues in machinery and equipment. Perform routine maintenance to ensure systems operate efficiently and safely. Use diagnostic tools and testing equipment to verify the functionality of equipment. Document repairs, calibrations, and part replacements in maintenance logs. Collaborate with engineering and production teams to support new equipment installs or modifications. Ensure compliance with safety and quality standards. *Maintains regular attendance. *Ability to work mandatory over time. Performs other duties as requested by Management. Responsible for producing a high quality product. Responsible for proper hygiene, housekeeping, and safety practices. Equal Opportunity Employer. *These tasks are considered essential elements of the job. Qualifications Qualifications: Associate degree or technical diploma in Electro-Mechanical Technology, Industrial Maintenance, or a related field. 2+ years of relevant experience in an industrial or manufacturing environment. Strong knowledge of AC/DC circuits, PLCs, motors, gearboxes, and hydraulic/pneumatic systems. Ability to read and interpret technical diagrams and schematics. Proficiency with hand tools, diagnostic instruments, and maintenance software. Excellent problem-solving and communication skills. Ability to work independently and as part of a team. Ability to bend, twist, do extensive walking, lift up to 50 lbs, and have good hand-eye coordination. Must have a valid state driver's license. Preferred: Experience with automation systems and robotic equipment. Certification in electrical or mechanical systems (e.g. Maintenance Technician Certification). East Penn Benefits East Penn offers excellent benefits: Competitive compensation Group insurance that includes medical, dental, vision, and prescription coverage 401K savings plan Annual bonus 9 paid holidays and 10 paid vacation days Employee assistance programs Fitness Discounts Promotional opportunities Safety Glasses, Safety Shoes, and Uniform provided or reimbursed by the company Maintenance employees have the benefit of company supplied tools during their career at East Penn.

General Responsibilities: Perform field and/or laboratory testing, observation, and inspection of construction materials (e.g. soils, aggregates, concrete, asphalt, and steel). Communicate with project manager, engineering technicians, client representative, contractor's representative and others as applicable regarding the construction site, project requirements, and testing, observation, and inspection requirements and results. Transport material samples with associated identifying documentation to the laboratory for further testing and analysis. Tabulate, prepare, and submit data and observation in the form of written and digital reports as work is performed for daily transmittal to the Terracon Project Manager. Maintain and clean equipment, vehicles and work areas. May assist with scheduling and dispatch of Technicians to project sites. Adhere to strict safety standards. Essential Roles and Responsibilities: * Under close supervision of higher level technicians or staff professionals, assist on tasks and perform basic testing and observations duties. * Provides clear documentation of findings and results. * Communicates information to Project Manager and discusses accuracy of data in preparation for submittal. * Submits documentation and communicates results as directed by the Project Manager * Will be placed in a progressively increased role of training and responsibility in work assignments. * Maintains assigned equipment. * Drive a vehicle such as a Ford F-150 or equivalent. * Follow safety rules and practices and other safety requirements for all projects. Perform pre-task planning prior to executing work. Report any safety issues or concerns to management. * Be responsible for maintaining quality standards on all projects. Requirements: * High school diploma or equivalent * 6 months experience required. * Valid driver's license with acceptable violation history. Preferred Certification: * Obtain Nuclear Density Gauge certification within 6 months of hire. Required Certification: * Obtain ACI certification within 90 days of hire. * Successful completion of related internal safety certifications. About Terracon Terracon is a 100 percent employee-owned multidiscipline consulting firm comprised of more than 8,000 curious minds focused on solving engineering and technical challenges from more than 200 locations nationwide. Since 1965, Terracon has evolved into a successful multi-discipline firm specializing in environmental, facilities, geotechnical, and materials services. Terracon's growth is due to our talented employee-owners exceeding expectations in client service and growing their careers with new and exciting opportunities in the marketplace. Terracon's vision of "Together, we are best at people" is demonstrated through our excellent compensation and benefits package. Based on eligibility, role and job status, we offer many programs including medical, dental, vision, life insurance, 401(k) plan, paid time off and holidays, education reimbursement, and various bonus programs. EEO Statement Terracon is an EEO employer. We encourage qualified minority, female, veteran and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment, or any employee because of race, color, religion, national origin, age, sex, sexual orientation, gender identity, gender, disability, age, or military status.

Company OverviewAt Tire Pros we value each employee and encourage growth. We provide a fun and friendly work environment along with excellent training and development, competitive compensation, and top-tier benefits. Start your exciting new career with a strong and stable company. Job SummaryThe Lead Mechanic Technician performs automotive diagnostic, repair and maintenance procedures on customer vehicles. Great growth and career opportunities. Responsibilities Performs a variety of diagnostic tests using store engine analyzers and electronic computers. Performs the 32-point courtesy check to determine comprehensive mechanical and electronic functioning. Utilizes Mitchell Repair, All-Data and service manuals to research technical information. Conducts road tests and test drives on a customers vehicle Performs necessary repairs, routine maintenance or replacement of or to the engine, brakes, transmission, electrical systems and other parts of cars and trucks. Attends periodic training classes provided by Company and parts suppliers. Reviews weekly efficiency reports and submits payroll hours Maintains clean shop bays complying with company quality control program, company safety policy, OSHA and EPA regulations Desired Qualifications High school graduate or comparable vocational training Working knowledge of automotive/truck mechanical and electrical systems. Knowledge of the general operating systems in automobiles Working knowledge of automobile mechanical and electronic systems and competence with a variety of electronic tools, such as engine analyzers and computers Occupational training signified by professional certification such as ASE 3+ years of automotive repair experience Preferred Experience: 5+ years of comprehensive automotive repair using diagnostic tools and computers Working knowledge of parts ordering software Experience using engine analysers such as Genysis, Bosch, and OTC Preferred certification UTI, NASCAR or ASE certification Benefits and Perks Excellent Training and Development Competitive Compensation Friendly Work Environment Top Tier Benefits Compensation: $32.00 - $40.00 per hour Tire Pros is the nation's largest network with 600+ independent shops coast-to-coast, providing our customers with reliable automotive products and services for generations. We've built trust with our customers through our network independent and passionate dealers, each one as different as the communities they serve. Our teams make certain the vehicles they work on, keeps the promise of dependability. Whether it's a four-wheel-drive system, transmission, brakes, exhaust, heating, and air conditioning repair, our service will always be straightforward. We build relationships for the long haul. Today, we are looking for individuals who share this same level of commitment and passion for giving customers top-quality service, who will go above and beyond to meet the customer's needs. We strive to make Tire Pros not just a good place to work but an excellent place to work. We value our employees and have built a culture centered on their development and career growth. Investing in retaining the highest-caliber staff by providing a fun and friendly work environment along with excellent training, competitive compensation, and top-tier benefits. Apply now to start your exciting new career! This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to Tire Pros Corporate.

Company: TIME Manufacturing Company Job Title: Manufacturing Engineering Technician Work Site Location: Waco, TX TIME Manufacturing Company is a leading global manufacturer of vehicle-mounted aerial lifts, digger derricks, bucket trucks, and bridge inspection equipment. Through its renowned brands-Versalift, Ruthmann, Bluelift, France Elévateur, Movex, BrandFX, and Aspen Aerials-the company serves diverse industries, including electric utility, telecommunications, bridge inspection, tree care, and other fleet-supported sectors. With a strong commitment to innovation, quality, and customer satisfaction, TIME Manufacturing Company designs and manufactures top-tier products that enable professionals to operate safely and efficiently at various heights. Job Summary: The Manufacturing Engineering Technician (MET) acts as the bridge between the Manufacturing engineers who design a process and the production floor where the product is actually made. While the engineers focus on high-level concept and capital, technicians are the "hands-on" specialists who ensure the processes work, and the final products meet quality standards. Principal Duties: * Troubleshooting & Repair: When a machine on the assembly line fails or starts producing defective parts, the technician is the first responder. They diagnose mechanical, electrical, or software issues (such as PLC programming errors). * Process Optimization: They look for "bottlenecks" in production. If a certain step is taking too long or creating too much waste, they collect and analyze data alongside the engineers to enable a redesign the workstation layout or suggest a different tool to speed things up. * Quality Control: They conduct tests and measurements on finished goods to ensure they match the original engineering blueprints. * Utilization of LEAN tools to compile data such as time studies, work instructions, etc… * Project Management: Manage small capital spend projects under the direction of manufacturing engineers to enable facility and process improvements. * Safety: Champion a safety first mindset and lead by example. Requirements: * High school diploma or GED. * 3+ years of experience working within a manufacturing environment. * Proficient in Microsoft Office Suite, with a strong emphasis on Excel and PowerPoint. * Understanding of process improvement techniques and lean manufacturing principles. * Excellent analytical and problem-solving skills. * Strong interpersonal and communication skills, with the ability to work effectively in a team environment. * Familiarity with industry standards such as ANSI, ISO, or ASME is a plus. * Proficiency in CAD software Why Work at TIME Manufacturing Company? At TIME Manufacturing Company, it's not just a job - it's a passion. Our employees collaborate daily to design and manufacture the best aerial lift products and services in the industry. We take pride in creating modern work vehicles that keep the power grid running, maintain public infrastructure, and enhance safety across a variety of industries. If you're passionate about delivering excellence and excited about working with innovative technology, we encourage you to apply. Core Benefits * Competitive salary * Comprehensive health, dental, and vision insurance plans * 401(k) with company match * Paid time off and holidays * Professional development opportunities * Collaborative and innovative work environment Equal Employment Opportunity (EEO) Statement Time Manufacturing Inc. is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. #INDALL2

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. DEVELOPMENT TEST TECHNICIAN (MECHANICAL) Development test technicians get to assemble, troubleshoot, repair, and perform regular maintenance, work on flight and development engines, and support test and build equipment and tooling. Development test technicians support the company by building and maintaining flight-worthy spacecraft engines, components, and associated test equipment, supporting engineering in suggesting and implementing process improvements, and maintaining a clean and safe work environment. These technicians support activities in the engine assembly area, as well as enjoy working outside at the rocket development facility, on our development test (R&D) stands, supporting test operations first-hand. Development test technicians enjoy witnessing the rumbling of rocket engines throughout the day. We work as a highly integrated team and job responsibilities will include helping other programs to ensure the overall success of SpaceX. RESPONSIBILITIES: Prepare test articles, test stands, and systems for test operations Ensure all test stand-related equipment, systems, and servicing are performed on time, safely, and in a professional manner Perform post-test operations and inspections to ensure flight-worthy hardware Maintain, troubleshoot, and repair equipment and instrumentation as needed Fabricate, repair, and assemble hardware/equipment needed for test operations Collaborate with engineers to develop and document activities Ensure all components and materials are clean and inspected according to applicable standards Operate and maintain hardware, high-pressure systems and pumps, and other ancillary equipment including pneumatic components Obtain and maintain licenses, operator permits, or certifications as required Monitor and maintain a reasonable inventory of cryogenic equipment, pneumatic equipment, fittings, hoses, and other supplies necessary to perform test operations Acquire proper inventory parts and equipment needed for repair or replacement of defective components Process work orders and maintenance tickets Perform a variety of related duties in support of acceptance and development testing, as well as testing site-wide, as needed Develop novel ways site-wide to streamline processes and increase the reliability of testing operations Participate in rigging and crane operations for test equipment and test articles; including hangar bridge cranes and mobile crane lifts BASIC QUALIFICATIONS: High school diploma or equivalency certificate 3+ years of experience working with and troubleshooting complex mechanical systems, high-pressure fluid/pneumatic systems, or heavy equipment 3+ years of experience using power tools, hand tools, and calibrated tooling PREFERRED SKILLS AND EXPERIENCE: Airframe and Powerplant Mechanic (A&P) license Experience in airframe structural repair Experience in aviation electronics and avionics Society of Automotive Engineers (SAE) certification or training Experience with the testing process and optimization of test processes Experience with hydraulic plumbing repair/fabrication Experience in ground support equipment in the aerospace industry Experience in the space exploration industry, aviation, military, or other high-reliability operating environment Basic computer skills, including experience using Microsoft Office and photo generation/compilation Knowledge of vacuum systems Knowledge of all types of bore scope inspection equipment Knowledge of different fittings such as NPT, MS, AN, and Swagelok A demonstrated ability to read/understand technical manuals and reports Ability to read, and understand operating system schematics and drawings Use of precision measuring instruments/equipment Communication skills for relaying data (verbally and in writing) between other employees and customers Experience with rigging, cranes, and lift operations Ability to work effectively in a team environment Ability to rapidly change roles/responsibilities while working in a high-paced, challenging work environment Experience with analog and digital instrumentation (load cells, pressure transducers, strain gauges, RTDs, TCs, encoders, deflection gages, LVDTs, accelerometers, IMUs) ADDITIONAL REQUIREMENTS: Valid driver's license Flight hardware typically is built in tight quarters and physical dexterity is necessary to perform job functions The ability to lift heavy objects is required in this position (up to 25lbs unassisted) Must be able to work at elevated heights (up to 300 feet) with proper PPE Must be able to work in extreme outdoor environments - heat, cold, rain, etc. Must be able to work in an environment requiring exposure to fumes, odors, noise, and hazardous environments Must be able to work in elevated PPE, including supplied air respirators and chemical-resistant self-encapsulating suits Must be available to work overtime, weekends, and rotating shifts as needed based on site operational needs; flexibility required Must be able to and available for travel (up to 20% of the time), including military and government installations ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Applicants wishing to view a copy of SpaceX's Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to ************************ .

The Technician is a heavy equipment mechanic that specializes in maintaining and repairing cranes. This position may perform routine maintenance, like lubricating parts, as well as fixing other problems when the crane malfunction. The Technician position work in a safety-first type of environment. HCSG is a 24/7 service company that requires technicians to be available on-call and provide after hour or even weekend services as required due to customer needs. DUTIES & RESPONSIBILITIES * Must be able to be on-call and provide after hour services as required. * Troubleshooting, repairing, inspecting, and upgrading industrial hoists and cranes in the field at customer locations. * Perform OSHA required hoist and crane inspections and generating inspection reports and repair orders. * Communicate with the Service Manager and Branch Manager during the day so that work can be scheduled and completed on a daily basis. * Operate tools, equipment, and vehicles in a safe and responsible manner. Notify immediate supervisor of any deficiencies. * Maintain the ability to work with others in team environment. * Attend company provided trainings and seminars as required. * Participate in HCSG 5 Marks program * Other duties as assigned PHYSICAL DEMANDS The work is labor intensive. Must be able to lift up to 50lbs on a daily basis. Must be able to lift up to 100lbs on a rare basis. This position requires 90% of frequent climbing, balancing, stooping/crouching, overhead reaching, bending, squatting and prolonged standing and sitting. It requires occasional pushing, pulling, kneeling, and crawling. The position also involves great hand and eye coordination. Heights exceeding over 50 feet from time to time are normal to incur on a daily basis to maintain a crane. Employee will be required to travel from time to time (20 50%) and must be willing to work various shifts to accommodate needs of HCSG branches and customers. This includes on-call and overtime. Travel out of town may be required at the discretion of the company. WORK ENVIRONMENT Work is normally performed inside or outside (pending customer requirements) with varying degrees of extreme hot and cold temperatures depending on the weather. During summer months, temperatures can exceed 120 degrees. This position will be frequently exposed to noise, heights, fumes, dust, and odors. MINIMUM QUALIFICATIONS * 0 - 2 years of crane experience in an industrial facility * Must have a valid drivers license and acceptable driving record * Must always commit to working and driving safely * Must be willing to work off the ground at various heights * Must have basic computer skills * Must be able to communicate well with others and work independently or as a team PREFERRED QUALIFICATIONS * Vocational/Technical training certificate * Some electrical and mechanical knowledge * Knowledge of hand tools and/or possess hand tools Must be able to pass a pre-employment drug test and background (DISA) and submit to random and annual drug testing as required.

Full-time Description We are seeking a highly motivated and detail-oriented Electrical Test Technician specializing in Pre-Test and Power Testing to join our dynamic manufacturing team. In this role, you will be responsible for performing comprehensive electrical testing on printed circuit boards (PCBs) and assembled electronic components to ensure they meet rigorous quality standards. Your expertise will help guarantee that our products operate reliably and safely, supporting our commitment to excellence in electronics manufacturing. This position offers an exciting opportunity to apply your technical skills in a fast-paced environment, contributing directly to the quality assurance process and product integrity. Responsibilities Conduct pre-test procedures on PCB assemblies using precision measuring instruments such as calipers, micrometers, and ohmmeters to verify dimensions and electrical characteristics. Perform power testing on electronic modules, ensuring proper functionality under specified load conditions. Utilize schematic diagrams and technical documentation to troubleshoot and debug electrical circuits during testing phases. Operate and maintain automated optical inspection (AOI) systems and other test automation equipment to streamline quality control processes. Collect, analyze, and document test data accurately for quality assurance records, identifying any deviations or defects. Perform quality inspections adhering to IPC 610 standards for surface mount technology (SMT) components, solder joints, and overall PCB assembly integrity. Use hand tools such as soldering irons, screwdrivers, and precision tools to assist in assembly or rework as needed during testing procedures. Collaborate with manufacturing teams to improve test protocols, enhance debugging techniques, and ensure consistent product quality. Requirements Proven experience with surface mount technology (SMT), PCB assembly, and related manufacturing processes. Strong understanding of schematics, technical drawings, and electronic component specifications. Proficiency in using precision measuring instruments including calipers, micrometers, ohmmeters, and multimeters for data collection and analysis. Familiarity with quality control standards such as IPC 610 for soldering and PCB assembly inspection. Knowledge of test automation systems and automated optical inspection (AOI) equipment is highly desirable. Mechanical aptitude with the ability to handle hand tools effectively for assembly or rework tasks. Excellent debugging skills with a keen eye for detail to identify faults quickly during testing phases. Ability to interpret schematics, analyze test results, and document findings clearly for quality assurance purposes. Strong organizational skills with the capacity to perform multiple tests efficiently while maintaining high accuracy standards. Join us as an Electrical Test Technician (Pre-Test & Power Testing) where your technical expertise will drive product excellence! Be part of a forward-thinking team dedicated to innovation, quality assurance, and continuous improvement in electronics manufacturing.

InDyne is a full-service military, civilian and commercial operations company. Our Mission is to provide tailored cost effective, quality services and solutions. Our Vision is to exceed customer expectations by delivering results through agility, flexibility and responsiveness. Our Core Values include integrity, trust and loyalty. Responsibilities Performs technical functions with minimal supervision- Prepares reports, charts and graphs for other personnel to review and present. Performs standardization or prescribed assignments involving a sequence of related operations, follows standard work methods on recurring assignments but receives explicit instructions on unfamiliar assignments. Following minimal instructions, conduct a variety of tests using established methods, preparing test specimens, adjusting and operating equipment, recording test data, and pointing out deviations resulting from equipment malfunction or observational errors. Qualifications High school diploma or equivalnet and 2 years experience, or any equivalent combination of relevant education and experience. Physical demands- Generally an outside work environment, but can involv inside work in an office depending on the task. Outside work will include various environmental conditions including hot and cold climates, working in the elements. Must be able to carry a pack weighing approximately 20-50 lbs. Must be able to walk comfortably for several miles, potentially carrying previously mentioned pack. Work site will be Fort Hood, TX but may require extended temporary duty to other sites in continental USA. Ability to operate office equipment, such as a personal computer, phone systems, printers, etc. Must demonstrate professional behavior at all time when dealing with management, customers and co-workers. Must have clear, concise and accurate communication skills in English, both verbal and written. Independent transportation to office or work site is required. Ability to pass a drug screen

General Responsibilities: Perform field and/or laboratory testing, observation, and inspection of construction materials (e.g. soils, aggregates, concrete, asphalt, and steel). Communicate with project manager, engineering technicians, client representative, contractor's representative and others as applicable regarding the construction site, project requirements, and testing, observation, and inspection requirements and results. Transport material samples with associated identifying documentation to the laboratory for further testing and analysis. Tabulate, prepare, and submit data and observation in the form of written and digital reports as work is performed for daily transmittal to the Terracon Project Manager. Maintain and clean equipment, vehicles and work areas. May assist with scheduling and dispatch of Technicians to project sites. Adhere to strict safety standards. Essential Roles and Responsibilities: * Performs testing, observation, and inspection as directed in accordance with training and the specified procedures. * Provides clear documentation of findings and results. * Performs basic analysis of data to verify accuracy before communication and submittal to the Project Manager. * Communicates information to Project Manager and other personnel as directed by the PM. * Assists higher level technicians on complex tasks. * Maintains assigned equipment and related calibration. * Drive a vehicle such as a Ford F-150 or equivalent. * Follows safety rules and practices and other safety requirements for all projects. Performs pre-task planning prior to executing work. Report any safety issues or concerns to management. * Be responsible for maintaining quality standards on all projects. Requirements: * High school diploma or equivalent. * Minimum 1-2 years of relevant experience or the equivalent in training and related experience. * Experience with laptop computer use and Microsoft Word and Excel * Valid driver's license with acceptable violation history. Preferred Certification: * Certifications in one or more of the following areas: * NICET Level II certification in Construction Materials Testing in one or more of the following categories: Asphalt, Concrete, Soils. * NICET Level II certification in Geotechnical in one or more of the following categories: Construction, Laboratory, Exploration, Generalist * ICC certification in one or more of the following categories: Reinforced Concrete, Spray-applied Fireproofing, Structural Masonry, Prestressed/Post-Tensioned Concrete, Structural Steel - Bolting, Structural Steel - Welding. * American Welding Society (AWS) Certified Associate Welding Inspector (CAWI) * American Society for Nondestructive Testing (ASNT) Level II certification in more than one of the following areas: Visual Testing (VT), Magnetic Particle Testing (MT), Dye Penetrant Testing (PT), Radiographic Testing (RT), Ultrasonic Testing (UT). * Other national, regional, state, and local Materials related certifications requiring experience and written examination will also be considered if deemed appropriate by the Terracon Department Manager. Required Certification: * ACI certification in one or more of the following areas: * Concrete Field Testing Technician Grade I * Concrete Strength Testing Technician * Certified in radiation safety and Nuclear Density Gauge operation. * Successful completion of related internal safety certifications. About Terracon Terracon is a 100 percent employee-owned multidiscipline consulting firm comprised of more than 8,000 curious minds focused on solving engineering and technical challenges from more than 200 locations nationwide. Since 1965, Terracon has evolved into a successful multi-discipline firm specializing in environmental, facilities, geotechnical, and materials services. Terracon's growth is due to our talented employee-owners exceeding expectations in client service and growing their careers with new and exciting opportunities in the marketplace. Terracon's vision of "Together, we are best at people" is demonstrated through our excellent compensation and benefits package. Based on eligibility, role and job status, we offer many programs including medical, dental, vision, life insurance, 401(k) plan, paid time off and holidays, education reimbursement, and various bonus programs. EEO Statement Terracon is an EEO employer. We encourage qualified minority, female, veteran and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment, or any employee because of race, color, religion, national origin, age, sex, sexual orientation, gender identity, gender, disability, age, or military status.

Job Description Company: TIME Manufacturing Company Job Title: Manufacturing Engineering Technician Work Site Location: Waco, TX TIME Manufacturing Company is a leading global manufacturer of vehicle-mounted aerial lifts, digger derricks, bucket trucks, and bridge inspection equipment. Through its renowned brands-Versalift, Ruthmann, Bluelift, France Elévateur, Movex, BrandFX, and Aspen Aerials-the company serves diverse industries, including electric utility, telecommunications, bridge inspection, tree care, and other fleet-supported sectors. With a strong commitment to innovation, quality, and customer satisfaction, TIME Manufacturing Company designs and manufactures top-tier products that enable professionals to operate safely and efficiently at various heights. Job Summary: The Manufacturing Engineering Technician (MET) acts as the bridge between the Manufacturing engineers who design a process and the production floor where the product is actually made. While the engineers focus on high-level concept and capital, technicians are the "hands-on" specialists who ensure the processes work, and the final products meet quality standards. Principal Duties: Troubleshooting & Repair: When a machine on the assembly line fails or starts producing defective parts, the technician is the first responder. They diagnose mechanical, electrical, or software issues (such as PLC programming errors). Process Optimization: They look for "bottlenecks" in production. If a certain step is taking too long or creating too much waste, they collect and analyze data alongside the engineers to enable a redesign the workstation layout or suggest a different tool to speed things up. Quality Control: They conduct tests and measurements on finished goods to ensure they match the original engineering blueprints. Utilization of LEAN tools to compile data such as time studies, work instructions, etc… Project Management: Manage small capital spend projects under the direction of manufacturing engineers to enable facility and process improvements. Safety: Champion a safety first mindset and lead by example. Requirements: High school diploma or GED. 3+ years of experience working within a manufacturing environment. Proficient in Microsoft Office Suite, with a strong emphasis on Excel and PowerPoint. Understanding of process improvement techniques and lean manufacturing principles. Excellent analytical and problem-solving skills. Strong interpersonal and communication skills, with the ability to work effectively in a team environment. Familiarity with industry standards such as ANSI, ISO, or ASME is a plus. Proficiency in CAD software Why Work at TIME Manufacturing Company? At TIME Manufacturing Company, it's not just a job - it's a passion. Our employees collaborate daily to design and manufacture the best aerial lift products and services in the industry. We take pride in creating modern work vehicles that keep the power grid running, maintain public infrastructure, and enhance safety across a variety of industries. If you're passionate about delivering excellence and excited about working with innovative technology, we encourage you to apply. Core Benefits Competitive salary Comprehensive health, dental, and vision insurance plans 401(k) with company match Paid time off and holidays Professional development opportunities Collaborative and innovative work environment Equal Employment Opportunity (EEO) Statement Time Manufacturing Inc. is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. #INDALL2

Job Description The Technician is a heavy equipment mechanic that specializes in maintaining and repairing cranes. This position may perform routine maintenance, like lubricating parts, as well as fixing other problems when the crane malfunction. The Technician position work in a safety-first type of environment. HCSG is a 24/7 service company that requires technicians to be available on-call and provide after hour or even weekend services as required due to customer needs. DUTIES & RESPONSIBILITIES Must be able to be on-call and provide after hour services as required. Troubleshooting, repairing, inspecting, and upgrading industrial hoists and cranes in the field at customer locations. Perform OSHA required hoist and crane inspections and generating inspection reports and repair orders. Communicate with the Service Manager and Branch Manager during the day so that work can be scheduled and completed on a daily basis. Operate tools, equipment, and vehicles in a safe and responsible manner. Notify immediate supervisor of any deficiencies. Maintain the ability to work with others in team environment. Attend company provided trainings and seminars as required. Participate in HCSG 5 Marks program Other duties as assigned PHYSICAL DEMANDS The work is labor intensive. Must be able to lift up to 50lbs on a daily basis. Must be able to lift up to 100lbs on a rare basis. This position requires 90% of frequent climbing, balancing, stooping/crouching, overhead reaching, bending, squatting and prolonged standing and sitting. It requires occasional pushing, pulling, kneeling, and crawling. The position also involves great hand and eye coordination. Heights exceeding over 50 feet from time to time are normal to incur on a daily basis to maintain a crane. Employee will be required to travel from time to time (20 50%) and must be willing to work various shifts to accommodate needs of HCSG branches and customers. This includes on-call and overtime. Travel out of town may be required at the discretion of the company. WORK ENVIRONMENT Work is normally performed inside or outside (pending customer requirements) with varying degrees of extreme hot and cold temperatures depending on the weather. During summer months, temperatures can exceed 120 degrees. This position will be frequently exposed to noise, heights, fumes, dust, and odors. MINIMUM QUALIFICATIONS 0 - 2 years of crane experience in an industrial facility Must have a valid drivers license and acceptable driving record Must always commit to working and driving safely Must be willing to work off the ground at various heights Must have basic computer skills Must be able to communicate well with others and work independently or as a team PREFERRED QUALIFICATIONS Vocational/Technical training certificate Some electrical and mechanical knowledge Knowledge of hand tools and/or possess hand tools Must be able to pass a pre-employment drug test and background (DISA) and submit to random and annual drug testing as required.