Day Wireless Systems jobs in Portland, OR - 23 jobs

Install a variety of different equipment, wiring, and electrical systems into vehicles. Qualified candidates must be capable and comfortable removing OEM vehicle interior trim with complete wiring and electrical system. Experience with soldering, wire routing, wire protection, fusing, multi-voltage charging systems, relays/Switching/Integration is a plus. Experience with 12-volt installations experience, preferably with GPS, alarms, low-voltage mobile electronics, or stereos is preferred. Experience installing mobile electronic equipment into vehicles is highly preferred. Essential Functions/Major Responsibilities: Perform installations of fixed & wireless communications equipment by assembling and bolting equipment into vehicles by using guidelines. Limited supervision by the of Lead or Service manager. Be able to do a complete mobile installation, communication equipment install as well as being able to remove vehicle interior and wiring (or rewiring) a complete electrical system. Install electrical wiring harnesses, connect electrical fittings, drill holes, soldering and perform all physical tasks associated with upfitting vehicles. Develop efficient wiring routes throughout the vehicle and enable future replacement and/or troubleshooting Remove and disassemble OEM vehicle interiors when necessary. Perform quality control tasks in preparing the vehicles for departure as well as to ensure all parts are fitted and screwed in properly. Troubleshoot and diagnose problems with equipment as necessary. Maintain safe, clean and orderly tools and work area. Continuous learning in new products, skills techniques from colleagues and manufacturers Installations may be at the shop location or at a customer's site. Inventory/assemble parts and stage the installation prior to install to ensure correct parts available. Complete job tickets and time sheets to record installation work. Maintain positive customer relations and communication additional information when needed. Must be able to travel, this may be local, daily travel or overnight travel. Other duties as assigned. QualificationsExperience and Education: High School diploma is required, any additional education or trade school training of electrical, wiring, automotive is preferred. Experience working in an auto body shop Experience installing car stereo and electronic equipment highly preferred Experience removing the interior trim of vehicles Basic understanding of electrical theory and low-voltage electronics Completes job tickets, sales orders, and other required work documents. Willingness to train other Mobile Installation Technicians Knowledge of hand and power tools is required Possess the drive and mental aptitude to work safely with tools and understand auto-wiring. Self-motivated, professional, listen and follow directions of Service Manager Work well under pressure in a fast-paced environment. Be able to follow directions; evaluate problems and prioritize tasks. Ability to work well in small teams Licenses, Certifications: Valid Driver's License **Clean Driving Record is required ** (Major infractions are a disqualifier. ex: DUI, any drug motor vehicle offence, hit & run, reckless driving infractions, driving while suspended, passing a stopped school bus, involvement in a fatal accident, or 3 or more minor infractions within 3 year period) Current Basic MECP Certified or prior certification

may sit in either Utrecht, Netherlands OR Dublin, Ireland. Summary: Manages day-to-day activities for specific service customers. This position will be responsible for being one of the points of contacts between large, identified client(s). Works with Area Services Managers on business development, budget planning and analyzing profits & loss statements. Essential Duties and Responsibilities include the following. Other duties may be assigned. * Oversees installation and service projects and work with the Service Manager at shops to arrange. * Oversees the scheduling of customer installation projects working with the customer's team when needed. * Oversee the scheduling of on-site service calls and requests for support from client(s). * Responsible for keeping communications flowing between the leadership, Service, Engineering, Project Management and Sales, clients, and all other employees that need-to-know status information. * Oversees administrative functions performed at responding Service Center(s), including billing, accounts receivable, and time tickets for completed customer work. * Coordinates with Shop Service Manager(s) for scheduling of support resources when needed, as well as coordinating with Project Management for project support and Sales/DAS Sales for Strategic Sales staff as needed. * Coordinates with Area Service Manager(s) for scheduling of support resources as needed. * Coordinates with Project Management for project support as needed. * Responsible and communicative in addressing open tasks in a timely manner. * Collaborates with sales staff to develop new or ongoing business. * Accompanies sales staff, project managers and engineering on customer calls as needed. * Assists in designing systems to meet customer needs or when preparing project bids. * Collaborates with Engineering and Strategic Business to review and validate all designs done internally or Designed By Others (DBOs). * Responsible for verifying/identifying customer, AHJ, and/or carrier test requirements * Review, validate Service Project Scope for domestic and international projects and provide Service Labor Cost estimates. * Develop a vetting system to validate subcontractors and their support capabilities. This would include reviewing scopes, quotes and bid for pricing. * Collaborate with Service Technicians, Service Managers, Engineers, Project Managers and Post-Sale Technical Writer (PSTW) to develop technical documentation to include, but not limited to, Acceptance Test Plans (ATPs), Programming Guides, Commissioning Documents, Red-Line/As-Built's and Closeout Documentation (CoP). * Responsible for Client Specific QA Program; Development, Adoption and Adherence * Review and provide inputs on Pre-Sale Project Proposals * Verify Technical Qualifications of assigned Service Personnel and Subcontractors * Forecast, plan, schedules and secure training and certification courses for assigned service technical resources * Create Cell Data Test "UE Scripts"/"Scanner Templates" for Post-Processing activities including Post Processes Cell Data (Scanner and UE ); provided to Engineering for review/validation * Reviews, Analyzes and Validates RoIP, ERCES/ERRCS and Cellular Coverage Test Data for compliance * Provides or secures reachback support for the Service Technicians to resolve technical issues. * Responsible for System Staging coordination, scheduling and QA checklist completion * Responsible for shipping, tracking and receipt of equipment at the project location * Performs QA Reviews of Project Closeout Deliverables and Artifacts from Service, Engineering, Subcontractors, and Strategic Business. * Coordinates Project CoP activities with Project Management Team and PSTW * Collaborates with all internal departments that work on a project, to assist in developing technical documentation checklists from start to finish. * Responsible for having a launch meeting with all the parties to determine the timeline and whom will be responsible for what tasks. * Must be available for technician support, internal or external, to assist virtual on a process. * Work closely with the closeout team once a project if finalized with a closeout checklist. Communicate back to the customer for satisfaction and the notification of completion. * Performs customer service work as required. * Performs computer service activities and obtains outside service as needed. * Develops service maintenance opportunities with new and existing customers. * Coordinates with and supports the Strategic Sales staff as needed. * Other duties may apply Supervisory Responsibilities Supervises administrative support, installations, and technical operations for Day Wireless resources and Subcontractors. Carries out supervisory responsibilities in accordance with the organization's policies and applicable laws including providing of daily work direction, approving absences or overtime, and recommending or approving personnel actions. Qualifications Education and/or Experience Associate degree (A.A.) or equivalent from two-year college or vocational school in electronics & wireless system repair; plus minimum four years related work experience in electronic communications repair; or equivalent combination of education and experience. * Federal Communications Commission (FCC) Commercial License (General Radiotelephone Operator License/GROL) * ETA-Certified Service Manager (CSM) is preferred * Original Equipment Manufacturer (OEM) Certifications (Test Equipment, Data Platforms, Motorola, BDA/DAS) is ideal * Driver's License required * Passport valid for travel outside the United States required

Summary: Applies known scientific and mathematical discoveries to the solution of wireless systems designs through the use of mathematical tools of differential equations, calculus and statistics and commonly understood physical systems approaches. As a System Design Professional, you will be responsible for designing and developing complex systems and solutions to meet the needs of our clients. You will work with cross-functional teams to ensure that the systems are robust, scalable, and meet the performance requirements. Supervisory Responsibilities: N/A Essential Functions: Designs various radio and microwave, In-building and Wireless network systems. Supports sales and service teams and clients by providing technical expertise, both in person and by telephone. Create Statements of work, system optimization procedures and Acceptance Test Procedures for proof of performance criteria. Constructs System drawings using Microsoft Office Visio and /or AutoCAD. Work with cross-functional teams to ensure that the systems are robust, scalable, and meet performance requirements. Develop system requirements and specifications based on customer needs. Create and maintain system architecture and design documents. Develop and execute system integration plans and test procedures. Provide technical support during the installation and commissioning of the systems. Ensure that the systems comply with relevant industry standards and regulations. Troubleshoot and resolve system issues and defects. Provide technical leadership and mentorship to junior engineers. Other duties as assigned. Other Functions and requirements: Tasks that may or may not be performed by the person in this job. 5+ years of experience in system design and development * Strong knowledge of system architecture and design principles * Experience with developing complex systems using various technologies * Familiarity with hardware and software integration * Ability to develop system requirements and specifications * Strong problem-solving skills and ability to work under pressure * Excellent communication and interpersonal skills * Ability to work collaboratively with cross-functional teams * Familiarity with industry standards and regulations * Ability to mentor and provide technical leadership to junior engineers Qualifications Education and/or Experience: bachelor's degree (B. A.) or equivalent from four-year college or university specializing in RF Engineering; or four years related experience and/or training; or equivalent combination of education and experience. Licenses, Certifications: Valid Driver's license, FCC General class license Preferred.

Summary: Position provides administrative support to the Service Center in the areas of billing, collections, customer service, purchasing, report generation and analysis, inventory control, payroll, shipping and receiving. Supervisory Responsibilities: May supervise other administration staff. Essential Functions: Tasks that must be performed by the person in this job. Reasonable accommodation(s) may be requested to enable individuals to perform the essential functions. Ability to continually be organized, multi task, works under pressure / deadlines, in a positive and professional manner. Review and update the payroll department on Prevailing Wage for employees falling under this requirement - must have knowledge for both State and Federal. Responsible for processing and sending certified payroll. Experience or familiarity with conditional/unconditional Lien Releases (contract forms) Greet and provide service to customers in person and by phone; answer, route, and manage incoming phone calls in a professional and courteous manner. Transfer phones to answering service during off hours. Contact customers by phone, per collection procedures, to arrange for payment on past due accounts in a firm yet courteous manner, per established deadlines. Perform accurate and fast data entry to record: payroll hours / billable hours, product & service orders, new warranties, warranty claims, sales, work orders, maintenance contracts, purchases, subcontractor / vendor / customer invoices. Manage and balance petty cash and billable vs. payroll hours (work in progress reports). Act as dispatcher for technicians to coordinate and schedule customer, vendor, and support personnel service calls, pickups, deliveries. Generate, print, analyze, and resolve issues from reports about: sales, purchases, expenses, coding, customer accounts, invoiced but not billed, inventory, etc. Manager and order parts, office supplies, restock other office and inventory items. Provide administrative support including preparing and sending documents. Lock / Unlock property gates and/or building doors, set security alarms morning and evening. Other duties as assigned. Non Essential Functions: Tasks that may or may not be performed by the person in this job. Receive incoming / prepare outgoing shipments; route to appropriate department / ship via appropriate carrier. Leave the office to purchase money orders with cash, go to post office, bank, etc. Filing or other duties may be assigned. Qualifications Education and/or Experience: High School diploma or general education degree (GED); or 5 years related experience and/or training; or equivalent combination of education and experience; previous experience in dispatching, office management, bookkeeping, collections, or billing is preferred. Licenses, Certifications: Valid driver license and insurance. Ideal candidate will be notary certified or be able to obtain certification as Notary Public.

Seeking an installer that can install equipment into law enforcement, public works and construction vehicles - A background in car audio, mobile radios, automotive lighting, automotive electronics or automotive work is desired. The installation tech will assist with the installation of lights, sirens, cages, bumpers, K9 units, gun racks, in car video systems, radars, computer docking stations and modems as well as other wireless communications systems in vehicles at our local upfitting shop in Salem. This is typically an M-F 8 to 5 job. Some Overtime and travel may be required but minimal. Successful candidates will be motivated to learn new products, have good attendance and a desire for a full-time career with a great company. This person will need to be able to work independently and in a team environment. Applicants should have experience with the following: * Automotive electronics * Mobile radios * Computers * Part assembly * 12-Volts * 110-Volts * Marine electronics * Bluetooth * Power tools * Aftermarket automotive lighting * Automotive assembly CB radios The technician will need to exhibit similar skills useful in the installation of vehicle stereo components, alarm systems and hands free automotive cellular components. Plus, if you have experience doing the following (transferable skills): Installation of vehicle lighting, controls, sirens, cameras, electronic locks, and other similar technologies in vehicles. Dismantling the interior and exterior of vehicles. This includes seats, carpeting, flooring, dash and interior panels, headliners, and lights to prepare vehicle for installation of new systems. Install radio communications systems, antennas and GPS equipment into vehicles. or mobile command centers. Vehicle repairs or replacing bumpers, lights and other automotive parts. Custom fabrication using metal, wood and other various materials. Comfortable using power tools, hand tools, electrical equipment. Day Wireless Systems (DWS) and Reliance Connects is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind: DWS is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at DWS are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. DWS will not tolerate discrimination or harassment based on any of these characteristics. DWS encourages applicants of all ages. Qualifications Experience Preferred 1 year: Upfitting or car stereo installation. Installation of radios or other equipment in vehicles. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

A Contract Administrator manages the entire contract lifecycle, from drafting and negotiating terms to ensuring compliance and maintaining records, focusing on minimizing risk and meeting business goals for sales, purchases, and partnerships, requiring strong communication, negotiation, analytical, and organizational skills, often with a business or legal degree. They work with various teams, analyze risks, explain contract details, and monitor adherence to legal requirements and company policies. Key Responsibilities Drafting & Review: Prepare and review contracts (sales, purchase, service) for clarity, accuracy, and legal compliance. Negotiation: Negotiate terms and conditions with internal stakeholders and external parties. Risk Management: Analyze potential risks and ensure contracts align with business objectives. Compliance: Ensure all contracts adhere to relevant laws, regulations, and company policies. Record Keeping: Maintain organized and updated contract records. Stakeholder Communication: Explain contract terms to managers and other interested parties. Monitoring: Track deadlines, deliverables, and renewals. Daily Activities Receiving requests for contract drafting from different departments (sales, legal, IT). Preparing contract drafts using standard templates. Liaising with external organizations and internal teams. Managing contract workflows and ensuring smooth execution. Qualifications Essential Skills & Qualifications Skills: Excellent communication, negotiation, analytical thinking, attention to detail, organization, and time management. Technical Skills: Proficiency in MS Office and contract management software. Knowledge: Understanding of contract law and business financial practices. Education: Bachelor's degree in business, finance, law, or a related field is often required, with an MBA sometimes preferred.

The Pre-Sale Project Manager is responsible for the overall coordination, implementation, execution, control, and completion of high-profile proposals at Day Wireless Systems. This position is responsible for gathering and orchestrating the Strategic presale process from Proposal Request to Contract Execution and Award. This role ensures that projects align with company strategy, commitments, and goals. The SB Project Manager will coordinate team efforts and manage third-party contractors or consultants to deliver proposals successfully. The position involves defining project objectives, overseeing quality control, and managing a range of critical disciplines. The primary focus will be on ensuring timely quote delivery and contract execution for Strategic Business (SB/SBI) customers, achieved through meticulous tracking, organization, and management of all SB activities. Effective coordination and communication with internal departments, external subcontractors, vendors, and customers will be essential. Additionally, this role will collaborate closely with the Regulatory Affairs Coordinator and the Accounting Department to ensure the incorporation of appropriate country-specific details and taxes into each proposal and subsequent contract. The overall job functions can be broadly divided into three categories: Intake & Tracking, Proposal Coordination and Contract Coordination. Additionally, this role will serve as backup for SB account executives, maintaining frequent follow-ups and updates between clients and our internal teams, and performing administrative tasks as required. Key Responsibilities: Own the full scope of each presales project; leading the information gathering from sales where necessary, to ensure that all project scope is addressed in the response and accurate exclusion list is developed. Analyze project blueprints and specifications to ensure precise quantity takeoffs and cost estimates. Collaborate closely with project managers to understand project requirements, timelines, and budget constraints. Conduct due diligence to determine the best market value costs for materials, labor, and equipment. Solicit and evaluate competitive bids from subcontractors, vendors, and suppliers. Stay current with industry trends, construction methods, and materials costs. Communicate with subcontractors and suppliers (domestic and international) to obtain timely proposals and quotes. Update opportunities in NetSuite with presale data for tracking purposes. Lead communication and progress reporting during presales through NetSuite and Teams. Coordinate internal communications requirements for each proposal, including emails, calls, and meetings as needed. Generate detailed cost estimates covering labor, materials, equipment, and overhead expenses. Foster strong relationships with subcontractors and suppliers to secure favorable pricing and terms. Act as backup for SB account executives, ensuring consistent client communication and timely updates throughout project phases. Track the status of active proposals using Microsoft Planner Teams. Facilitate frequent follow-up and updates between clients and internal teams to ensure project progress and client satisfaction. Identify areas for improvement and develop strategies for enhancement. Perform administrative tasks as required to support project management and operational efficiency. Provide direction and support to project team members, ensuring alignment with company methodologies. Build, develop, and maintain vital business relationships for project success and future growth. Present and defend estimates to management and clients as necessary. Coach, mentor, motivate, and supervise employees project team members. Ensure adherence to company policies, procedures, and industry regulations. Qualifications Qualifications: Bachelor's degree in construction management, Engineering, or related field preferred, or equivalent practical experience. Proven experience as a Construction Estimator or in a similar role within the construction industry. Proficiency in construction estimating software and MS Office Suite. Experience in NetSuite, Paycom and Teams is a plus. Strong analytical skills with exceptional attention to detail. Ability to conduct due diligence and determine best market value costs. Excellent communication and negotiation skills, adept at building and maintaining relationships. Ability to work independently and collaboratively in a team environment. Familiarity with local building codes, regulations, and construction practices.

Summary: Position provides administrative support to the Service Center/or Department in the areas of billing, collections, customer service, purchasing, report generation and analysis, inventory control, payroll, shipping and receiving. Depending on the department or Service location, administrative duties may vary. Essential Functions: Tasks that must be performed by the person in this job. Reasonable accommodation(s) may be requested to enable individuals to perform the essential functions. Ability to continually be organized, multitask, work under pressure / deadlines, in a positive and professional manner. Back up time entry including prevailing wage rates and intent and affidavits Greet and provide service to customers by phone; answer, route, and manage incoming phone calls/questions in a professional and courteous manner. Provide administrative support including preparing and sending documents, this could include reports, data entry, presentations and other admin tasks. Perform accurate and fast data entry to record payroll hours / billable hours, product & service orders, sales, work orders, purchases, subcontractor / vendor / customer invoices. Manage and balance petty cash and billable vs. payroll hours (work in progress reports). Generate, print, analyze, and resolve issues from reports about sales, purchases, expenses, customer accounts, invoiced but not billed, inventory, etc. Manage and order parts, office supplies, restock other office and inventory items. Review and manage subcontracts and customer purchase orders in order to set up new jobs. Other duties as assigned. Other Functions: Tasks that may or may not be performed by the person in this job. Receive incoming / prepare outgoing shipments; route to appropriate department / ship via appropriate carrier. Filing or other duties may be assigned. Education and/or Experience: High School diploma or general education degree (GED); or 1-year related experience and/or training; or equivalent combination of education and experience; previous experience in dispatching, office management, bookkeeping, collections, or billing is preferred. Ideal candidates will have experience with NetSuite & Ultipro software.

As a Radio and System Journeyman Technician in our Strategic Business division, based in Europe, preferably the Netherlands, you will play a pivotal role in ensuring the smooth operation and maintenance of radio and communication systems within our organization's strategic business division. You will be responsible for installing, configuring, troubleshooting, and repairing various radio and system equipment. Additionally, you will have the opportunity to travel for projects, supporting our global operations and contributing to the success of our strategic initiatives. Essential Functions: Tasks that must be performed by the person in this job. Reasonable accommodation(s) may be requested to enable individuals to perform the essential functions. Installation and Configuration: Install and configure radio and communication systems, including hardware, software, and associated equipment, ensuring proper functionality and integration with existing systems. System Maintenance: Perform routine maintenance tasks, including inspections, diagnostics, repairs, and upgrades to radio and system equipment to ensure optimal performance and reliability. Troubleshooting and Issue Resolution: Identify and resolve technical issues and faults in radio and communication systems, employing diagnostic tools and techniques to minimize downtime and restore services promptly. System Upgrades and Expansion: Collaborate with the strategic business division and other relevant stakeholders to assess system requirements, recommend upgrades, and participate in the planning and implementation of system expansions or improvements. Project Travel: Willingness and ability to travel to various locations within Europe and potentially internationally for project deployments, installations, and support. Documentation and Reporting: Maintain accurate records of system configurations, maintenance activities, and troubleshooting procedures. Prepare reports on system performance, incidents, and recommended solutions. Compliance and Safety: Adhere to industry standards, regulations, and safety protocols while working with radio and communication systems. Ensure compliance with applicable legal and regulatory requirements. Training and Support: Provide training and guidance to end-users on operating radio and communication systems effectively. Offer technical support and assistance, addressing user queries and concerns promptly. Collaboration: Collaborate with cross-functional teams, including IT personnel, engineers, and project managers, to coordinate system installations, upgrades, and maintenance activities. Must be able to travel, this may be local, daily travel or overnight travel. Other Essential Functions: Tasks that may or may not be performed by the person in this job. Maintains cleanliness and maintenance of any company vehicle. Fill out and complete time sheets, job tickets, data entry. Retrieving parts from warehouse for repairs and maintenance. Lifting boxes, tools, computers, service monitors, and other shop equipment. Qualifications Education and/or Experience: Three to five years' experience in 2-way radio and wireless communication systems theory. Able to use computer and program, troubleshoot, perform diagnostics, and repair complex communication systems. High school diploma or equivalent. Additional technical certifications or vocational training in radio systems, electronics, or related fields is preferred. Proven experience as a radio technician, system technician, or a similar role, demonstrating hands-on experience with radio and communication systems. Technical Skills: Proficiency in installing, configuring, and maintaining radio systems, including knowledge of various hardware and software components. Familiarity with communication protocols, network infrastructure, and diagnostic tools. Analytical Thinking: Strong problem-solving skills with the ability to analyze and troubleshoot technical issues effectively. Attention to detail and the ability to work under pressure to meet deadlines. Communication: Excellent verbal and written communication skills to convey technical information clearly and concisely. Ability to interact professionally with diverse stakeholders. Adaptability: Flexibility to adapt to evolving technologies and changing work environments. Willingness to learn and stay updated with the latest advancements in radio and communication systems. Team Player: Demonstrated ability to work collaboratively in a team-oriented environment. Willingness to share knowledge, assist colleagues, and contribute to collective goals. Safety Consciousness: Strong commitment to following safety guidelines and protocols to ensure a secure working environment. Valid Driver's License: Possession of a valid driver's license for travel to different project locations as required. Licenses, Certifications: An industry license (FCC, FICA or NARTE). A valid driver license and insurability in the state of employment. CET or NABER certification.

Summary: The purpose of this position is to assist in the development of technicians and ensure that major projects in the area have the technical resources to successfully be deployed. The person in this role will also have a position in a service shop and assist that shop with their day-to-day technical needs. Essential Duties and Responsibilities include the following. Other duties may be assigned. Work with shop managers and technicians on conducting, facilitating and executing training plans, creating plans that are collective but also to fit each Technician's level. These plans can and should include formalized classroom training as well as on the job (OJT) practical training. The goal of training is to assist our technical team to progress from Apprentice-Journeyman-Senior-System technician. The STT should consider compliance, industry specific regulations and company specific policies and procedures while creating and maintaining employee training records. Develop ongoing training standards and minimums to progress from each technical level. Review technician knowledge to ensure the standards are met for advancement. Provide feedback to the technician supervisor on the technician's status with meeting the standards. Assist with scheduling and conduct OJT training. Conduct senior technician meetings to discuss technical topics. Assist service managers/lead technicians in reviewing major projects in presale and post-sale. Project scope Technicians assigned and their readiness to implement the project Local technician OJT Project tasks checklist Quality control Attend weekly shop manager Teams meeting Ability to travel within their assigned territory, plus other locations for training, meetings and educational purposes. Qualifications Education and/or Experience: Bachelor's degree (B. A.) from four-year college or university in RF electronic technologies plus more than 8 years related experience and/or training in maintaining and troubleshooting complex communications systems; or equivalent combination of education and experience. Strong communication and the ability to train to a variety of different individuals. Three to five years' experience in 2-way radio and wireless communication systems theory. Able to use computer and program, troubleshoot, perform diagnostics, and repair complex communication systems. Experience in diagnostics, repair, maintenance, program wireless communication equipment such as 2-way radios, transmitters, receivers, antennas for customers. Experienced with dispatch consoles, paging infrastructure, and trunked radio systems. Knowledge of radio repair, mobile installations, DC, AC, and RF Theory as it applies to wireless communications. Certificates, Licenses, Registrations A variety of certifications and licenses will be required, and on-going learning will be important for this role. Some of the certifications that are valuable are: FCC GROL CET/CETsr/CETma ETA Motorola ASTRO Valid Driver's License

Summary: Trouble shoot, repair, maintenance, program wireless communication equipment such as 2-way radios, transmitters, receivers, antennas for customers. The technician will develop skills working with but not limited to the following: Installing and Servicing Fire Alarm systems, installing and Servicing Burglar Alarm systems, Installing and Servicing Hardwired and Wireless systems, Installing and Servicing CCTV systems, Installing and Servicing Access Control systems Installing and Servicing Intercom systems Supervisory Responsibilities: N/A Essential Functions: Tasks that must be performed by the person in this job. Reasonable accommodation(s) may be requested to enable individuals to perform the essential functions. Other duties as assigned. Diagnose, troubleshoot, discuss, and resolve wireless communication equipment questions and problems with customers in a positive and efficient manner in person on customer's site, by phone, e-mail, and at Day Wireless Systems' shop location. Perform required diagnostic and analytical tests to diagnose and repair wireless communication equipment. Analyze and comprehend diagnostic test results and use to repair and program radios and wireless equipment. Work with customer to determine deadlines, urgency, timeline, and schedule of completing repairs, maintenance, and programming with customers, vendors, and shop management to ensure resolution of problem meets customer's needs. Perform wireless communications system programming, per industry practices and vendor criteria. Performs the installation of radio and wireless mobile and base communications systems per industry practices and vendor criteria. Reports any accidents, maintenance needs, or repairs to management while using any company vehicle. Practices and follows safe driving procedures as described and required in safe driver training. Must have California Driver's license and be insurable per an acceptable driving record. Must be able to travel, this may be local, daily travel or overnight travel. Must be able to work during the days / hours of Mon thru Fri, 8 a.m. to 5 p.m. and must be available for occasional mandatory over time, with little to no advance notice. Non-Essential Functions: Tasks that may or may not be performed by the person in this job. Maintains cleanliness and maintenance of any company vehicle. Fill out and complete time sheets, job tickets, data entry. Retrieving parts from warehouse for repairs and maintenance. Lifting boxes, tools, computers, service monitors, and other shop equipment. Qualifications Education and/or Experience: Associate's (A A) degree or equivalent from two-year college or vocational school in electronics and wireless system repair is preferred but not required. Minimum 6 months to a year of related work experience in electronic communications repair is required; or the equivalent combination of education and experience. Acceptable previous experience in diagnostics, repair, maintenance, program wireless communication equipment such as 2-way radios, transmitters, receivers, antennas for customers. Knowledge of radio repair, mobile installations, DC, AC, and RF Theory as it applies to wireless communications. Licenses, Certifications: Valid driver license and must be insurable to drive. Tools, Equipment, Machines (non office): Ability to operate test equipment to perform diagnostics on wireless equipment. Basic hand tools such as cordless power drills, screw drivers, wrenches, etc. are typically used in the performance of this job.

Essential Functions/Major Responsibilities: Perform installations of fixed & wireless communications equipment by assembling and bolting equipment into vehicles by using guidelines. Limited supervision by the of Lead or Service manager. Be able to do a complete mobile installation, communication equipment install as well as being able to remove vehicle interior and wiring (or rewiring) a complete electrical system. Install electrical wiring harnesses, connect electrical fittings, drill holes, soldering and perform all physical tasks associated with upfitting vehicles. Develop efficient wiring routes throughout the vehicle and enable future replacement and/or troubleshooting Remove and disassemble OEM vehicle interiors when necessary. Perform quality control tasks in preparing the vehicles for departure as well as to ensure all parts are fitted and screwed in properly. Troubleshoot and diagnose problems with equipment as necessary. Maintain safe, clean and orderly tools and work area. Continuous learning in new products, skills techniques from colleagues and manufacturers Installations may be at the shop location or at a customer's site. Inventory/assemble parts and stage the installation prior to install to ensure correct parts available. Complete job tickets and time sheets to record installation work. Maintain positive customer relations and communication additional information when needed. Must be able to travel, this may be local, daily travel or overnight travel. Other duties as assigned. Experience and Education: High School diploma is required, any additional education or trade school training of electrical, wiring, automotive is preferred. Experience working in an auto body shop Experience installing car stereo and electronic equipment highly preferred Experience removing the interior trim of vehicles Basic understanding of electrical theory and low-voltage electronics Completes job tickets, sales orders, and other required work documents. Willingness to train other Mobile Installation Technicians Knowledge of hand and power tools is required Possess the drive and mental aptitude to work safely with tools and understand auto-wiring. Self-motivated, professional, listen and follow directions of Service Manager Work well under pressure in a fast-paced environment. Be able to follow directions; evaluate problems and prioritize tasks. Ability to work well in small teams Licenses, Certifications: Valid Driver's License **Clean Driving Record is required ** (Major infractions are a disqualifier. ex: DUI, any drug motor vehicle offence, hit & run, reckless driving infractions, driving while suspended, passing a stopped school bus, involvement in a fatal accident, or 3 or more minor infractions within 3 year period) Current Basic MECP Certified or prior certification Qualifications Summary: Install a variety of different equipment, wiring, and electrical systems into vehicles. Qualified candidates must be capable and comfortable removing OEM vehicle interior trim with complete wiring and electrical system. Experience with soldering, wire routing, wire protection, fusing, multi-voltage charging systems, relays/Switching/Integration is a plus. Experience with 12-volt installations experience, preferably with GPS, alarms, low-voltage mobile electronics, or stereos is preferred. Experience installing mobile electronic equipment into vehicles is highly preferred.

The Strategic Business (SB) Project Manager is responsible for the overall direction, coordination, implementation, execution, control, and completion of high-profile projects at Day Wireless Consultants. This role ensures that projects align with company strategy, commitments, and goals. The SB Project Manager will oversee the acquisition of resources, coordinate team efforts, and manage third-party contractors or consultants to deliver projects successfully. The position involves defining project objectives, overseeing quality control, and managing a range of critical projects. Travel: Up to 50% Key Responsibilities: Project Management: Lead the planning and execution of single or multi-site communications projects. Define project scope, goals, and deliverables; develop and communicate project timelines. Manage project scope, budget, and resources, including subcontractors. Create and manage Change Orders as necessary. Mitigate risks and identify project opportunities. Develop detailed project plans and schedules, review deliverables with the project team before client handoff. Track project deliverables, manage client expectations, and provide regular progress reports to senior management and stakeholders. Implement and manage project changes and interventions to achieve desired outcomes. Provide direction and support to project team members, ensuring alignment with company methodologies. Coach, mentor, motivate, and supervise employees project team members. Quality Assurance: Ensure project quality through training and adherence to efficient processes, tasks, and procedures. Identify areas for improvement and develop strategies for enhancement. Enforce company standards of quality and utilize company methodologies. Financial Management: Manage project budgets, financial data, and reports. Analyze project profitability, revenue, profit margins, and asset utilization. Accurately forecast revenue, profits, and losses. Seek opportunities to improve revenue, profitability, and cost savings while ensuring customer satisfaction. Sales and Business Development: Identify and capitalize on opportunities for additional sales and strategic partnerships. Build, develop, and maintain vital business relationships for project success and future growth. Safety: Act as a role model for safe behaviors and practices. Report unsafe conditions, seek safety guidance, and request necessary safety training. Prioritize safety over financial goals or deadlines and report all job-related accidents and injuries immediately. Ensure safe practices are followed for company vehicles and equipment. Other Functions: Perform administrative tasks such as answering phones, filing, and organizing documents. Maintain cleanliness and functionality of company equipment and vehicles. Stay informed about new technologies and their potential applications. Ensure accurate entry of work hours into the payroll system and adherence to company policies. Required Skills and Competencies: Technical Skills: Strong understanding of Project Management concepts and Construction Project Management. Familiarity with the National Fire Code and related regulations. Soft Skills: Exceptional interpersonal and communication skills, both verbal and written. Effective persuasion, negotiation, and troubleshooting abilities. Quick learner with the ability to adapt to new technologies and hardware. Ability to delegate tasks and follow up effectively. Meticulous approach to achieving high-quality results with a strong focus on meeting challenging customer commitments. Additional Skills: Proficient in office applications including PowerPoint, Word, Excel, Visio, AutoCAD Lite, and Outlook/Email. Strong problem-solving skills and ability to address and resolve issues tactfully. Qualifications Education and Experience: Bachelor's degree or vocational training in project management, business management, or a related field preferred. Minimum of 5 years of experience in roles requiring strong decision-making and organizational skills, ideally in operational management, scheduling, and budgeting. Experience with communication site development, tower construction, wireless networks, and 911 emergency dispatch centers is highly desirable. Licenses, Certifications: Must have a valid state driver's license and be insurable per an acceptable driving record. Project Management Professional (PMP) credential preferred Ability to get PMP certified within 1-3 years after starting if not already PMP certified.

Summary: Under general supervision of the service manager to perform system design, troubleshooting, programming, and installations. Optimizes, maintains, and repairs 2-way and wireless communications systems including complex radio systems and 911 communications centers for customers. Essential Functions: Tasks that must be performed by the person in this job. Reasonable accommodation(s) may be requested to enable individuals to perform the essential functions. Diagnose, troubleshoot, discuss, and resolve wireless communication equipment questions and problems with customers in a positive and efficient manner in person on customer's site, by phone, e-mail, and at Day Wireless Systems' shop location. Perform required diagnostic and analytical tests to diagnose and repair wireless communication equipment such as dispatch consoles, paging infrastructure, and trunked radio systems, and mobile installations. Analyze and comprehend diagnostic test results and use to repair and program radios and wireless equipment. Work with customer to determine deadlines, urgency, timeline, and schedule of completing repairs, maintenance, and programming with customers, vendors, and shop management to ensure resolution of problem meets customer's needs. Prepare quotes and bids. Acts as the shop's safety coordinator by collaborating with safety rep from DWS' headquarters for all aspects of safety training and implementation. Perform wireless communications system programming, per industry practices and vendor criteria. Performs the installation of radio and wireless mobile and base communications systems per industry practices and vendor criteria. Reports any accidents, maintenance needs, or repairs to management while using any company vehicle. Practices and follows safe driving procedures as described and required in safe driver training. Must be available to work Monday thru Friday, 8 a.m. to 5 p.m. To properly support our public safety and first responder customers, technicians will be required to be on call, which includes overtime with little or no notice. Must be able to travel, this may be local, daily travel or overnight travel. Qualifications Education and/or Experience: Three to five years' experience in 2-way radio and wireless communication systems theory. Able to use computer and program, troubleshoot, perform diagnostics, and repair complex communication systems. Associate degree or equivalent from a two-year college or vocational school in electronics and wireless system repair is preferred but not required. Experience in diagnostics, repair, maintenance, program wireless communication equipment such as 2-way radios, transmitters, receivers, antennas for customers. Experienced with dispatch consoles, paging infrastructure, and trunked radio systems. Knowledge of radio repair, mobile installations, DC, AC, and RF Theory as it applies to wireless communications. Licenses, Certifications: An industry license (FCC, FICA or NARTE). A valid driver license and insurability in the state of employment. CET or NABER certification.

Summary: Position provides administrative support to the Service Center/or Department in the areas of billing, collections, customer service, purchasing, report generation and analysis, inventory control, payroll, shipping and receiving. Depending on the department or Service location, administrative duties may vary. Essential Functions: Tasks that must be performed by the person in this job. Reasonable accommodation(s) may be requested to enable individuals to perform the essential functions. Ability to continually be organized, multitask, work under pressure / deadlines, in a positive and professional manner. Back up time entry including prevailing wage rates and intent and affidavits Greet and provide service to customers by phone; answer, route, and manage incoming phone calls/questions in a professional and courteous manner. Provide administrative support including preparing and sending documents, this could include reports, data entry, presentations and other admin tasks. Perform accurate and fast data entry to record payroll hours / billable hours, product & service orders, sales, work orders, purchases, subcontractor / vendor / customer invoices. Manage and balance petty cash and billable vs. payroll hours (work in progress reports). Generate, print, analyze, and resolve issues from reports about sales, purchases, expenses, customer accounts, invoiced but not billed, inventory, etc. Manage and order parts, office supplies, restock other office and inventory items. Review and manage subcontracts and customer purchase orders in order to set up new jobs. Other duties as assigned. Other Functions: Tasks that may or may not be performed by the person in this job. Receive incoming / prepare outgoing shipments; route to appropriate department / ship via appropriate carrier. Filing or other duties may be assigned. Education and/or Experience: High School diploma or general education degree (GED); or 1-year related experience and/or training; or equivalent combination of education and experience; previous experience in dispatching, office management, bookkeeping, collections, or billing is preferred. Ideal candidates will have experience with NetSuite & Ultipro software.

Summary: Installs fixed radio, BDA/DAS and wireless communications equipment consistent with manufacturer and company guidelines to include antenna and coax networks. Essential Duties and Responsibilities include the following. Other duties may be assigned. Installs cable and antenna consistent with project requirements and according to installation and safety standards. May also deconstruct installation sites as required. Manages inventory and assembles parts prior to installation work to ensure correct parts are available. Works with system engineer and technical staff to optimize site following installation to ensure system or equipment function properly. Completes job tickets, sales orders, and other required work documents. Maintains positive customer relations. Communicate with internal personnel, outside service personnel, equipment vendors and other agencies to coordinate and provide information pertaining to service requests, work orders, and equipment evaluations. Perform related telecommunication duties commensurate with classification level. Supervisory Responsibilities This job has no supervisory responsibilities. Qualifications Preferred Experience Land Mobile Radio (LMR), cellular technology, Distributed Antenna Systems (DAS), and data networking. Two (2) + years' experience in installation, maintenance and repair of commercial LMR and related electronic equipment and systems. Specialized knowledge of basic electronics theory, circuit design, antenna systems Ability to exercise independent judgment in diagnosing and resolving technical problems and address multiple issues simultaneously. Solid analytical, written and oral communication skills and the ability to communicate at both the technical and inter-team level. Ability to work as a productive team member; share knowledge, and document work in a collaborative effort to resolve problems and optimize the network. Strong customer service skills and a demonstrated ability to work with both internal and external customers at all levels in a professional and supportive manner. Ability to work in fast-paced technology environment; to work as a productive member of a professional team, as well as demonstrate initiative; ability to work under pressure, multi-task and rapidly adjust priorities. Ability to work with diverse populations. Ability to adapt to rapidly changing technology. Ability to safely lift and move 50 pounds is required.

Summary: Trouble shoot, repair, maintenance, program wireless communication equipment such as 2-way radios, transmitters, receivers, antennas for customers. Essential Functions: Tasks that must be performed by the person in this job. Reasonable accommodation(s) may be requested to enable individuals to perform the essential functions. Other duties as assigned. Diagnose, troubleshoot, discuss, and resolve wireless communication equipment questions and problems with customers in a positive and efficient manner in person on customer's site, by phone, e-mail, and at Day Wireless Systems' shop location. Perform required diagnostic and analytical tests to diagnose and repair wireless communication equipment. Analyze and comprehend diagnostic test results and use to repair and program radios and wireless equipment. Work with customer to determine deadlines, urgency, timeline, and schedule of completing repairs, maintenance, and programming with customers, vendors, and shop management to ensure resolution of problem meets customer's needs. Perform wireless communications system programming, per industry practices and vendor criteria. Performs the installation of radio and wireless mobile and base communications systems per industry practices and vendor criteria. Reports any accidents, maintenance needs, or repairs to management while using any company vehicle. Practices and follows safe driving procedures as described and required in safe driver training. Must have California Driver's license and be insurable per an acceptable driving record. Must be able to work during the days / hours of Mon thru Fri, 8 a.m. to 5 p.m. and must be available for occasional mandatory over time, with little to no advance notice. Must be able to travel, this may be local, daily travel or overnight travel. Qualifications Education and/or Experience: Associate's (A A) degree or equivalent from two-year college or vocational school in electronics and wireless system repair is preferred but not required. Minimum 6 months to a year of related work experience in electronic communications repair is required; or the equivalent combination of education and experience. Acceptable previous experience in diagnostics, repair, maintenance, program wireless communication equipment such as 2-way radios, transmitters, receivers, antennas for customers. Knowledge of radio repair, mobile installations, DC, AC, and RF Theory as it applies to wireless communications. Licenses, Certifications: Valid driver license and must be insurable to drive.

Seeking an installer that can install equipment into law enforcement, public works and construction vehicles - A background in car audio, mobile radios, automotive lighting, automotive electronics or automotive work is desired. The installation tech will assist with the installation of lights, sirens, cages, bumpers, K9 units, gun racks, in car video systems, radars, computer docking stations and modems as well as other wireless communications systems in vehicles at our local upfitting shop in Salem. This is typically an M-F 8 to 5 job. Some Overtime and travel may be required but minimal. Successful candidates will be motivated to learn new products, have good attendance and a desire for a full-time career with a great company. This person will need to be able to work independently and in a team environment. Applicants should have experience with the following: * Automotive electronics * Mobile radios * Computers * Part assembly * 12-Volts * 110-Volts * Marine electronics * Bluetooth * Power tools * Aftermarket automotive lighting * Automotive assembly CB radios The technician will need to exhibit similar skills useful in the installation of vehicle stereo components, alarm systems and hands free automotive cellular components. Plus, if you have experience doing the following (transferable skills): Installation of vehicle lighting, controls, sirens, cameras, electronic locks, and other similar technologies in vehicles. Dismantling the interior and exterior of vehicles. This includes seats, carpeting, flooring, dash and interior panels, headliners, and lights to prepare vehicle for installation of new systems. Install radio communications systems, antennas and GPS equipment into vehicles. or mobile command centers. Vehicle repairs or replacing bumpers, lights and other automotive parts. Custom fabrication using metal, wood and other various materials. Comfortable using power tools, hand tools, electrical equipment. Day Wireless Systems (DWS) and Reliance Connects is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind: DWS is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at DWS are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. DWS will not tolerate discrimination or harassment based on any of these characteristics. DWS encourages applicants of all ages. Qualifications Experience Preferred 1 year: Upfitting or car stereo installation. Installation of radios or other equipment in vehicles. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

Seeking an installer that can install equipment into law enforcement, public works and construction vehicles - A background in car audio, mobile radios, automotive lighting, automotive electronics or automotive work is desired. The installation tech will assist with the installation of lights, sirens, cages, bumpers, K9 units, gun racks, in car video systems, radars, computer docking stations and modems as well as other wireless communications systems in vehicles at our local upfitting shop in Salem. This is typically an M-F 8 to 5 job. Some Overtime and travel may be required but minimal. Successful candidates will be motivated to learn new products, have good attendance and a desire for a full-time career with a great company. This person will need to be able to work independently and in a team environment. Applicants should have experience with the following: * Automotive electronics * Mobile radios * Computers * Part assembly * 12-Volts * 110-Volts * Marine electronics * Bluetooth * Power tools * Aftermarket automotive lighting * Automotive assembly CB radios The technician will need to exhibit similar skills useful in the installation of vehicle stereo components, alarm systems and hands free automotive cellular components. Plus, if you have experience doing the following (transferable skills): Installation of vehicle lighting, controls, sirens, cameras, electronic locks, and other similar technologies in vehicles. Dismantling the interior and exterior of vehicles. This includes seats, carpeting, flooring, dash and interior panels, headliners, and lights to prepare vehicle for installation of new systems. Install radio communications systems, antennas and GPS equipment into vehicles. or mobile command centers. Vehicle repairs or replacing bumpers, lights and other automotive parts. Custom fabrication using metal, wood and other various materials. Comfortable using power tools, hand tools, electrical equipment. Day Wireless Systems (DWS) and Reliance Connects is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind: DWS is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at DWS are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. DWS will not tolerate discrimination or harassment based on any of these characteristics. DWS encourages applicants of all ages. Qualifications Experience Preferred 1 year: Upfitting or car stereo installation. Installation of radios or other equipment in vehicles. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)