Electrician jobs in Weatherford, OK - 158 jobs

Job Posting End Date 01-26-2026 Please note the job posting will close on the day before the posting end date In this role you will perform work associated with the installation, operation, testing and maintenance of all protection and control devices and related equipment under direct, immediate or general supervision. Such devices and equipment includes but is not limited to digital relays, electromechanical relays, intelligent electronic devices, Station Disturbance Recorders (SDR), digital fault recorders (DFR), oscillographs and event recorders, RTU's and station SCADA systems, statistical load metering, telemetering and transducers. Additionally, install, maintain and operate all power line carriers (PLC), tone, pilot wire, fiber and associated P&C communications equipment. Respond to emergency call-outs and coordinate prompt restoration of service to customers as required. This list is not intended to limit assignment of work or the degree of supervision under all operating conditions. Employee may perform miscellaneous, related, and incidental work in addition to that specifically outlined below. **This posting represents two positions posted at multiple levels. The description below is based on level C. Additional skills and requirements needed for B&A. Job Description WHAT YOU'LL DO: Assist in the performance of acceptance and installation tests on protection, control, and measurement devices and associated equipment in stations. Test protection &control devices and equipment periodically and as required. Calibrate protection & control devices and equipment on a pre-established schedule and as required. Assist with diagnosis of trouble, mis-operation, or damage of equipment and assist with corrective action to affect repair and prevent recurrence. Operate a computer device to test, calibrate, and retrieve data from protection & control and devices. Assist in the installation, maintenance, and operation of all power line carriers, station SCADA, and associated communications equipment or cables as assigned. Perform switching under direct supervision of qualified personnel following direction of the proper operating authority. Assist in the installation, maintenance, and operation of any new and added equipment or systems as assigned. Maintain test equipment and automotive equipment in good working order so that work can be performed safely and efficiently anywhere throughout the System. Prepare and maintain accurate records, reports and drawings as required. Assist employees of equal or higher classification. Perform all duties in accordance with the Company's safety rules and operating regulations, NERC and environmental compliance, and practices. Perform similar or less skilled work as assigned. WHAT WE'RE LOOKING FOR: Education: Associate's degree in electrical engineering technology, electronic technology, or related technology field. Experience: No previous work experience required. Must have the ability and desire to acquire the necessary knowledge and skills to perform the duties and/or responsibilities of the key job (P & C Electrician A) in this family and be qualified through demonstration, examination and/or performance appraisal as determined by the Company. Must live within 30 minutes of the service territory. Considerable travel and overtime may be required to complete work assignments. Must successfully complete Physical Abilities Test (PAT). License/Certification: Must possess and maintain a valid state driver's license and must meet all vehicle operation requirements as designated by federal and/or state law. OTHER MUST HAVES: Minimum Requirements: Amount of weight lifted from floor/ground to waist level: 60 pounds .Amount of weight to be carried for 20 feet: 50 pounds. Amount of weight lifted to chest level: 30 pounds. Amount of weight lifted to eye level: 30 pounds. Distance to walk accumulated over the course of an 8 hour shift: 1 mile. Distance in feet to climb and work on a ladder/structure: 20 feet and higher. Distance in feet to ascend to and work in a bucket/lift: 100 feet and higher (tested at 60 feet).Ability to discriminate between colors: Yes (tested). In addition to a competitive compensation, AEP offers a unique comprehensive benefits package that aims to support and enhance the overall well-being of our employees. Where Putting the Customer First Powers Everything We Do At AEP, we're more than just an energy company - we're a team of dedicated professionals committed to delivering safe, reliable, and innovative energy solutions. Guided by our mission to put the customer first, we strive to exceed expectations by listening, responding, and continuously improving the way we serve our communities. If you're passionate about making a meaningful impact and being part of a forward-thinking organization, this is the company for you! In addition to a competitive compensation, AEP offers a unique comprehensive benefits package that aims to support and enhance the overall well-being of our employees. Where Putting the Customer First Powers Everything We Do At AEP, we're more than just an energy company - we're a team of dedicated professionals committed to delivering safe, reliable, and innovative energy solutions. Guided by our mission to put the customer first, we strive to exceed expectations by listening, responding, and continuously improving the way we serve our communities. If you're passionate about making a meaningful impact and being part of a forward-thinking organization, this is the company for you! #AEPCAREERS #AEPPSO Compensation Data Compensation Grade: U070-P04 Compensation Range: $32.76 - $51.00 The Physical Demand Level for this job is: H - Heavy Work: Exerting 50 to 100 pounds of force occasionally, and/or 25 to 50 pounds of force frequently, and/or greater than negligible up to 10-20 pounds of force constantly to move objects. Physical demand requirements are in excess of those for Medium Work. Hear about it first! Get job alerts by email. Log in to your Candidate Home Account today! If you don't have an account, you can create one. It is hereby reaffirmed that it is the policy of American Electric Power (AEP) to provide Equal Employment Opportunity in all respects of the employer-employee relationship including recruiting, hiring, upgrading and promotion, conditions and privileges of employment, company sponsored training programs, educational assistance, social and recreational programs, compensation, benefits, transfers, discipline, layoffs and termination of employment to all employees and applicants without discrimination because of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, veteran or military status, disability, genetic information, or any other basis prohibited by applicable law. When required by law, we might record certain information or applicants for employment may be invited to voluntarily disclose protected characteristics.

Job Posting Title Electrician -- Oklahoma Tourism and Recreation Department Statewide Crew Agency 566 DEPARTMENT OF TOURISM AND RECREATION Supervisory Organization Parks Admin Major Maintenance Job Posting End Date Refer to the date listed at the top of this posting, if available. Continuous if date is blank. Note: Applications will be accepted until 11:59 PM on the day prior to the posting end date above. Estimated Appointment End Date (Continuous if Blank) Full/Part-Time Full time Job Type Regular Compensation This position pays $26.74 per hour ($55,620 per year). Job Description Basic Purpose Positions in this job family are assigned responsibilities involving the layout, installation, maintenance, and repair of electrical systems, fixtures and related equipment in a state agency or facility. Typical Functions The functions performed in this job family will vary by level, unit and organization, but may include the following: * Maintains and repairs electrical equipment in existing buildings; makes inspections and diagnoses electrical troubles; assigns and oversees work details; performs complicated installations, such as repair of laboratory equipment, including centrifuges, sterilizers, stills and medical equipment; performs electrical work on air-conditioning, motor generator units and compressors. * Maintains and repairs high voltage distributor transformers and makes internal connections to adjust to the required voltage; installs, splices and insulates high voltage underground and overhead cables; locates and repairs trouble in starter and motor windings, fields, armatures, bearings, brush holders or commutators; tests starters for insulation breakdown, open shorts and wrong connections in windings; makes calculations to determine order of winding, size of wire, span, number of coils, number of turns per coil and manner of connection for use in winding and rewinding armatures; overhauls and repairs complex motors; replaces, repairs or rebuilds motor parts as required. * Selects, orders and checks delivered materials for compliance with specifications; advises superiors regarding electrical matters; oversees and instructs electrical apprentices and manual workers; keeps records and prepares reports. Works with consultants, engineers and suppliers on designs, trouble shooting system or equipment and system upgrades. Level Descriptor Levels are distinguished based on the complexity of assigned duties, the level of expertise required for completion of work assignments, and the responsibility assigned for the supervision of others. This is the leadership level of this job family where employees are assigned responsibilities involving the design and planning of electrical systems as well as responsibility for supervising the work of others in maintaining and repairing such systems. This will involve overall responsibility for the electrical systems in an assigned agency, facility or designated area. Education and Experience Education and Experience requirements at this level consist of active or inactive licensure as an electrical contractor with the Oklahoma Construction Industries Board. Knowledge, Skills, Abilities and Competencies Knowledge, Skills and Abilities required at this level include knowledge of the methods, materials, tools and equipment used in the maintenance and minor repair of electrical fixtures and equipment; of the safety precautions necessary in the electrical trade; of local, state and national electric underwriters' code for electrical installation; of electrical systems used in new construction; of laws, rules and regulations governing the planning, installation, repair, maintenance and renovation of electrical systems; and of supervisory principles and practices. Ability is required to perform minor maintenance and repair of electrical apparatus; to keep records and make reports; to install maintain, and repair electrical fixtures; to make preliminary sketches and develop bills of materials for electrical work; to direct non-licensed personnel; to perform highly independent work; and to supervise the work of other electricians. Special Requirements In order to operate state-owned vehicles in the performance of regularly assigned duties, some positions may require that the successful applicant possess a valid Oklahoma driver's license at the time of appointment. Some positions may require possession of active licensure within 30 days of appointment. Some agencies may have determined positions in this job family to be safety sensitive as defined by 63 O.S. § 427.8. Equal Opportunity Employment The State of Oklahoma is an equal opportunity employer and does not discriminate on the basis of genetic information, race, religion, color, sex, age, national origin, or disability. Current active State of Oklahoma employees must apply for open positions internally through the Workday Jobs Hub. If you are needing any extra assistance or have any questions relating to a job you have applied for, please click the link below and find the agency for which you applied for additional information: Agency Contact

We are seeking a skilled Electrician to join our team. The ideal candidate will have experience in both residential and commercial electrical work, demonstrating proficiency in a variety of electrical systems and tools. This role requires a strong understanding of electrical codes and safety practices, The Electrician will be responsible for installing, maintaining, and repairing electrical systems while ensuring compliance with the National Electrical Code (NEC). ESSENTIAL FUNCTIONS * Performs various corrective/preventive repairs as assigned for building maintenance. * Maintains inventory of items such as light bulbs and equipment parts. * Conducts inspections and repairs of lights. Indoor & outdoor. * Familiar with high & low voltage. * Completes assigned work orders as needed and may assist other departments. * Perform any other maintenance duties or tasks as assigned. * General knowledge blueprints and schematics. POSITION QUALIFICATIONS * High School Graduate or General Education Degree (GED) * Minimum of 1 year of experience * Must possess and maintain a valid driver's license. * Unlimited journeyman's license OTHER REQUIREMENTS * Ability to pay attention to the details of a project or task. * Must be able to lift 50 pounds or more, be able to stand and/or walk 8 hours a day. * Must be familiar with all common hand tools and their uses. * Ability to climb and maneuver a ladder and be comfortable with heights. * N.E.O offers excellent benefits. Apply and become part of the Golden Norseman team. Resumes or other supplemental material cannot be substituted for any part of the application. Application can be found online at ****************************************** Please submit it along with your resume or mail to: NEO A&M College, Human Resources, 200 I Street NE, Miami, OK 74354. AA/EOE The College has reviewed this to ensure that essential functions and basic duties have been included. It is intended to provide guidelines for job expectations and the employee's ability to perform the position described. It is not intended to be construed as an exhaustive list of all functions, responsibilities, skills and abilities. Additional functions and requirements may be assigned by the supervisors as deemed appropriate. This document does not represent a contract of employment, and the College reserves the right to change this job description and/or assign tasks for the employee to perform, as the College may deem appropriate.

Oak View Group Oak View Group is the global leader in venue development, management, and premium hospitality services for the live event industry. Offering an unmatched, 360-degree solution set for a collection of world-class owned venues and a client roster that includes the most influential, highest attended arenas, convention centers, music festivals, performing arts centers, and cultural institutions on the planet. Position Summary Under general direction, the part-time Electrician performs journeyman electrician level and leadwork duties in the technical operation, maintenance and repair of electrical generating equipment, fire and smoke detection system, HVAC, and Building Automation systems, & auxiliary systems facility wide. With support of Engineering staff, the part-time Electrician will support electrical projects in all buildings. This role will pay an hourly rate of $25.00 Benefits for Part-Time roles: 401(k) savings plan and 401(k) matching. This position will remain open until April 17, 2026. About the Venue The Bank of Oklahoma Center, also known as the BOK Center, is located in downtown Tulsa and serves as the premier sports and entertainment venue of the region. Offering 19,199-seat multi-purpose arena and 565,000 total square footage designed to accommodate concerts, family shows and other special events, the BOK Center has been named one of the country's best venues. The Arvest Convention Center (ACC), located in the Arena District in downtown Tulsa, is a modern and award-winning venue providing over 275,000 square feet of flexible meeting space. Owned by the City of Tulsa for over 50 years, the ACC has been host to every kind of event imaginable and proudly serves the citizens of Tulsa and guests from around the world. Responsibilities Track daily productivity as designated by supervisor via allocation sheets, daily logs and micro main. Communicate arrival, location and departure with Electrician supervisor. Clearly, effectively and timely communicate work issues with staff. Routinely test and maintain emergency generator and lighting. Responsible for maintenance on venue lighting fixtures - including upgrades and replacements as designated by supervisor. Installs and maintains show power for exhibit hall and arena power distribution Troubleshoot parking gate problems. Maintain all electric cords, and other equipment. Maintain clearance around electric panels, transformers, etc. Provide excellent customer service assistance to all internal and external clients. Operate, configure, program zones/ groups, create reports on Square D Power Link/ Power Logic system. Other duties as required. Qualifications Must possess High School diploma, GED or equivalent. Completed 5 Year Electrical Apprentice school. Licensed Journeyman Electrical; Master Electrician License highly desirable. Demonstrated experience with maintenance and repair of electrical power generating equipment and auxiliary highly desirable. Strong interpersonal and organizational skills. Possession of, or ability to obtain a valid driver's license. Must be able to report for emergencies as needed. Ability to communicate clearly and concisely in the English language, both orally and in writing. Must be available to work nights, weekends and holidays. Strengthened by our Differences. United to Make a Difference At OVG, we understand that to continue positively disrupting the sports and live entertainment industry, we need a diverse team to help us do it. We also believe that inclusivity drives innovation, strengthens our people, improves our service, and raises our excellence. Our success is rooted in creating environments that reflect and celebrate the diverse communities in which we operate and serve, and this is the reason we are committed to amplifying voices from all different backgrounds. Equal Opportunity Employer Oak View Group is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis (“protected class”) including, but not limited to veteran status, uniform service member status, race, color, religion, sex, national origin, age, physical or mental disability, genetic information or any other protected class under federal, state, or local law.

Our client is seeking a licensed Apprentice Electrician to support a commercial project along the turnpike near Stroud, OK. This assignment is expected to last 2-4 months, with the potential for additional projects afterward. Pay: $25-$30/hr+ DOE Schedule: Full-time; start times vary per project and overtime will be required Responsibilities Assist with installation of electrical systems for commercial new construction Read and follow blueprints, schematics, and specifications Run conduit, pull wire, install fixtures, and complete other related tasks Maintain safety standards and follow OSHA regulations Support Journeymen and Master Electricians as needed

Join our amazing team and contribute as a: Electrician ABOUT THE ROLE Amrize is recruiting a full-time Electrician in Stringtown, OK. Sand and Gravel Plant. Primarily responsible for installing, replacing, repairing, maintaining, testing, and troubleshooting industrial electrical equipment and associated electrical and electronic controls/systems. WHAT YOU'LL ACCOMPLISH * Reads and interprets drawings and electrical code specifications to determine the layout of industrial electrical equipment installations. Performs scheduled maintenance inspections in accordance with company policy and practice requirements. * The work involves replacing or repairing worn or damaged components or systems. * Installs, replaces, or repairs electrical wiring, receptacles, switch boxes, conduits, feeders, cable assemblies, lighting fixtures, electrical motors, generators, industrial storage batteries, hydraulic and pneumatic electrical control systems, and other electrical components. * Periodically tests and troubleshoots electrical and electronic equipment and components for continuity, current, voltage, and resistance. * Maintains electrical equipment inventory and records of maintenance. * Demonstrate a commitment to communicating, improving and adhering to health, safety and environmental policies in all work environments and areas. Promote a culture of safety and exhibit these behaviors. * Other duties as needed. WHAT WE'RE LOOKING FOR * Required Education: High School Diploma or equivalent * Professional Experience (Required): A minimum of five (5) years of experience as an industrial electrician in the mining or construction industry, High Voltage Experience required * Ability to read and write * Excellent driving skills * Valid Driver's License Additional Requirements: * Successful candidates must adhere to all safety protocols and proper use of Amrize approved Personal Protection Equipment ("PPE"), including but not limited to respirators. Employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit tests. WHAT WE OFFER * Competitive salary * Retirement Savings: Choose from 401(k) pre-tax and/or Roth after-tax savings * Medical, Dental, Disability and Life Insurance * Holistic Health & Well-being programs * Health Savings Accounts (HSAs) & Flexible Spending Accounts (FSAs) for health and dependent care * Vision and other Voluntary benefits and discounts * Paid time off & paid holidays * Paid Parental Leave (maternity & paternity) * Educational Assistance Program * Dress for your day HR Contact: Julia Morgan SANTAELLA BUILDING INCLUSIVE WORKSPACES At Amrize, there is endless opportunity for you to play your part. Whether you're in a technical, managerial, or frontline role, you can shape a career that works for you. We're seeking builders, creative thinkers and innovators. Come put your expertise to work while developing the knowledge and skills to drive your career forward. With us you'll have the chance to build your ambition! Amrize North America Inc. takes pride in our hiring processes and our commitment that all qualified applicants will receive consideration for employment without regard to age, race, color, ethnicity, religion, creed, national origin, ancestry, gender, gender identity, gender expression, sex, sexual orientation, marital status, pregnancy, parental status, genetic information, citizenship, physical or mental disability, past, current, or prospective service in the uniformed services, or any other characteristic protected by applicable federal, state or local law. Amrize North America Inc, and its respective subsidiaries are Equal Opportunity Employers, deciding all employment on the basis of qualification, merit and business need. Amrize Canada Inc. is committed to the principles of employment equity and encourages the applications from women, visible minorities, and persons with disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request accommodation in order to apply for a position with us, please email recruiting-accommodations@amrize.com. This email address should only be used for accommodations and not general inquiries or resume submittals. In Ontario, our organization/business is committed to fulfilling our requirements under the Accessibility for Ontarians with Disabilities Act. Under the Act, accommodations are available on request for candidates taking part in all aspects of the selection process. While we sincerely appreciate all applications, only candidates selected for an interview will be contacted.

Inventor Gregory Taylor started work on this invention in 1976, with the goal of reducing the “average Joe's” electric bill. By 1995, Taylor had invented the KVAR™ Energy Controller (KEC) Unit, a one-of-a-kind cost saving tool and received his first U.S. Patent in August of that same year. (U.S. PATENT # 5,440,442) KVAR™ Energy Savings, Inc. (KVAR™ Corp.), a Florida State corporation, began manufacturing and distributing the KVAR Energy Controller (KEC) in 1995 Job Description Job Summary We have an immediate opening for an experienced Electrician. You will be responsible for installing, maintaining, and troubleshooting electrical systems, as well as electrical components for industrial machinery. We work with both residential and commercial clients, so you must be able to diagnose and repair electrical wiring problems in a variety of homes and commercial buildings, such as outlets, lighting, servers, and electronic equipment connections. Our ideal candidate has at least two years of professional experience and has extensive knowledge of different types of electrical networks. Responsibilities Review job calls each day Identify electrical problem areas on-site that need replacement or repair Perform repair or replace wiring when necessary Troubleshoot and ensure that the electrical system is working properly before leaving client location Maintain and store tools and equipment properly Qualifications Requirements and Qualifications High school diploma or equivalent Completion of an electrician program at a vocational school or an electrician apprenticeship Current electrician license 2+ years of electrician experience preferred Proficient with standard industry tools and techniques Able to read blueprints and schematic drawings Excellent communication and problem-solving skills Additional Information All your information will be kept confidential according to EEO guidelines.

Job Description Assembles, tests, and trouble shoots electrical/mechanical assemblies. Performs under minimum supervision, tasks of substantial variety or complexity which requires a masterly knowledge of assembly techniques, materials, tools, machines, and equipment. Assist in training new employees, assigning jobs, and check quality of others' work. Job Duties/Responsibilities Perform work in a professional and safe manner, report unsafe work practices Assemble electrical/mechanical subassemblies from electrical diagrams, drawings, P&IDs or verbal instructions. Organize and coordinate office/employee functions. Terminate electrical devices on equipment, Wire Junction Boxes, Burner Management systems, run conduit, and point to point testing in Class 1 Div 1 and Class 1 Div 2 area classifications Perform troubleshooting and testing of electrical systems PLC programming a plus Other duties assigned. Skills/Knowledge Experience in wiring production equipment which would include but not limited to wiring GPU's, Dehy's, Awareness of areas of classification (ie. Class 1 Div 1 groups CD, Class 1 Div 2 groups CD), Nema enclosure designations and proper grounding technique. Ability to read and understand electrical schematics & P&IDs Familiarity with hand and power tools. Ability to identify and read values of common components. Ability to read and interpret blueprints, wiring diagrams, assembly prints, and electronic schematics. Versed in circuit theory and is able to identify and perform component level troubleshooting. Advanced soldering, wire crimping skills and working with CLX conduit and cable glands Education High School Degree or equivalent. Experience 7 + years experience as a general electrician that would be required to understand and wire from a schematic/drawing. About FET FET (Forum Energy Technologies, Inc.) is a global company, serving the crude oil, natural gas, and renewable energy industries. FET is headquartered in Houston, TX with quality manufacturing, efficient distribution, and service facilities conveniently located to support the major energy-producing regions of the world. Forum's products and services range from the underwater reservoir to the refinery, from the sea floor to the above ground transportation line. We pride ourselves on giving you a comprehensive offering of solutions to maximize your operations and improve your bottom line. Our customers are our partners and we work with them to solve their ever-changing challenges. FET is an Equal Opportunity Employer. FET does not discriminate on the basis of race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected under federal, state, or local law. All employment decisions and practices at FET are subject to the foregoing non-discrimination provisions and are based solely on merit, competence, performance, and business needs at the time.

Business Divisions: Nortek Air Solutions Time Type: Full Time Classification: ☐ Salary ☒ Hourly Specific Location: Okarche, OK Business Unit: Manufacturing Operations As a member of the production staff, the Electrician/Electrical Technician is responsible for the building assembling, installation and testing of electrical and control systems on custom OEM HVAC equipment. The right candidate will work closely with the Electrical Engineering team and the electrical assemblers in support of the identification, development, and implementation of best practices across the Electrical assembly process. Success will come in the form of well-established electrical assembly practices and knowledge, effective feedback to the Electrical Engineering design team, and an elimination in escaping defects and quality issues to our customers. * Drives effective electrical installation and assembly practices across our operations. * Provides leadership and mentoring to the electrical assembly team to ensure proper installation practices are observed. * Works with Electrical Engineering team to identify and resolve wiring and electrical system development problems. * Can read, comprehend, and trains others on electrical schematics containing both line and control voltage circuits. * Good Knowledge of electrical codes concerning both line and control voltage circuits and devices. * Leverages knowledge of electromechanical devices and controls such as transformers, relays, switches, variable frequency drives, disconnects, and other devices in the improvement of manufacturing processes. * Demonstrates the ability to perform various electrical assembly activities, including ability to run rigid and flexible conduit inside and outside of air handling units in accordance to drawings and specifications/current electrical codes, run and terminate both line and control voltage wiring circuits in accordance to drawings and specifications/current electrical codes, * Ability to communicate with internal electrical engineering staff daily as well as with external customers as needed and represent the company in a professional manner. * Ability to be trained and certified to operate overhead crane and fork trucks while moving and assembling product. * Maintain the work area and equipment in a clean and orderly condition and follows prescribed safety regulations. * Commits to performing job duties in a manner that ensures a safe work environment. * Must be able to wear protective gear and equipment. * Willingly and cooperatively performs other related duties as assigned by management. * Works with all types of high voltage power. * Inspect and examine the equipment to detect and investigate irregularities emits diagnostic rule and the electrical or electronic failures for the whole building. * Performs the installation, maintenance and repair of electrical equipment manufacturing, electronic, mechanical, pneumatic and hydraulic. * Helps manages daily activities of workflow in Electrical Assembly bays with the leads. * Other related duties as required. Job Qualifications: * Possesses current Journeyman Electrical License or Electrical Contractor License certification. * 5+ years of related electrical assembly or electrician experience. * High School Diploma or GED equivalent required. Preferred * Proficiency with the National Electrical Code * Strong aptitude and demonstrated competency working with electrical/mechanical components and systems found in industrial facilities. * Associates degree in electrical related field or other related technical school program * Ability to analyze and solve technical problems quickly and effectively * Familiarity and experience with automation and/or instrumentation control wiring * Ability to plan, prioritize, and coordinate multiple activities Nortek Air Solutions, LLC, offers a comprehensive compensation and benefits package. To learn more about Nortek Air Solutions, please visit our company website at ************************ About Nortek Air Solutions: Nortek Air Solutions, LLC (NAS) is a Madison Industries company. Madison Industries is one of the largest and most successful privately held companies in the world and has a robust portfolio of indoor air quality solutions. Madison builds entrepreneurially driven, branded market leaders that are committed to making the world safer, healthier, and more productive by creating innovative solutions that deliver outstanding customer value. NAS is the largest manufacturer of custom heating, ventilation, and air conditioning (HVAC) equipment in North America. Its products include FANWALL TECHNOLOGY, air handlers, packaged DX, vertical self-contained systems, energy recovery ventilators with integrated heating and cooling systems, coils and more. NAS has five strategically located manufacturing facilities which encompass over 2 million square feet of clean space and 180 sales representative offices. NAS's brands are known for innovation and advanced technology and provide customers with product solutions for every industrial need including commercial air handlers, clean room systems, and mission critical technology. NAS's end markets include healthcare, education, industrial, commercial, clean rooms, and data centers. Nortek Air Solutions, LLC, is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, sexual orientation, gender identity, status as a qualified individual with a disability, or any other characteristic protected by law.

Apprentice Electrician-Prism Electric, Inc. Prism Electric, Inc. is one of the most successful open-shop electrical contracting companies in Texas and Oklahoma. Garland based Prism Electric has expertise with projects in virtually every field of electrical construction - design/build services, industrial and commercial developments as well as government and institutional projects. Prism Electric possesses world-class technical experts who maintain vital, long-term relationships and a high level of credibility with general contractors and other customers we serve. We have a strong reputation and extensive network of customer relationships and have consistently provided new, cutting-edge product innovations. Job Details: The successful Apprentice Electrician will be responsible for learning and understanding electrical code through the NEC; Assembling, installing, maintaining, and testing electrical equipment in commercial and industrial settings; and maintaining a safe work environment at all times while working on construction projects as a part of the Prism Electric team. Responsibilities: Responsibilities of this position include, but are not limited to the following: Responsible for assembly, installation, maintenance and testing of electrical equipment and wiring systems in commercial, industrial and large multi-family settings. Prepares work area for installation of equipment. Installs or helps install electrical components. Connects wiring and equipment as per code and job specification. Operates equipment only if trained and certified to operate. (Note: Powder activated tools, and JLG lifts and other operations that may require certification and training before operating). Sets up and operates tools such as hydraulic benders, power threaders, power pullers and cable vacuum systems. Able to read blueprints and electrical drawings and install as specified. Verify dimensions, alignments and clearances per drawings or plans. Secure and lock up equipment after use. Journeyman Trade Certification in a related Construction trade will be considered highly desirable. A proven track record of delivering safe projects on schedule and within budget. Excellent working knowledge of the Building Codes. Strong communication and interpersonal skills. Requirements: Candidates must have 1-3 years of experience on commercial or industrial projects. High School Graduate or G.E.D. All Hand-tools & PPE Dependable vehicle for transportation to and from work Valid Driver's License with a Clean Driving Record Must be licensed to work in TX Legal to work in the US Job requires working in all elements, depending on job location, time of year, heat, cold, rain. Wear personal protective equipment (hard hat, safety glasses at all times), respirator when required. Able to work 8 -10 hours per day, 40 hours per week, and overtime as required and night shifts. Includes crawling, standing, stooping, bending, crouching, kneeling, sitting, reaching, able to routinely lift heavy objects in excess of 50 pounds and pushing and pulling of objects is required. Repetitive use of arms, hands and fingers. Physical work is a primary part (more than 70%) of the job Prism's project teams are some of the strongest in Texas and we aim to continue this excellence in our Oklahoma offices as well. Our team ensures an efficient, detail orientated, and productive work environment with effective communication and on time delivery of tasks. We are looking for individuals who possess the ability to demonstrate these abilities in a fast paced high energy work environment. CONTACT: Prism Electric is an Equal Opportunity/Affirmative Action Employer committed to diversity in our workforce. It is our policy to attract and retain the best-qualified people available, without regard to race, color, religion, national origin, gender, sexual orientation, age, disability or status as a Special Disabled Veteran, Vietnam Era Veteran or other qualifying veteran. Diverse employees/candidates are encouraged to respond. Prism Electric is committed to developing and maintaining a workplace that reflects the diversity of the communities we serve. M/F/D/V

Position: High Voltage Lineman-Full Time Performs a full range of work involved in the installation, maintenance, repair, modification, and testing of primary and secondary electrical distribution systems. Performs maintenance inspections to determine safety hazards, damage, and repair requirements. Must be able to work safely with 13,200 volts of electricity. Plans, installs, modifies, tests, maintains and repairs a variety of fixtures, hardware and equipment including transformers, generators, convertors, fuses, conductors, switches, conduit, controllers, etc. Must be trained in installing hi-voltage terminations, including transformer elbows, stress cones and splices. Requirements: Must have a minimum of five years journeyman-level experience and have completed a formal apprenticeship or equivalent formal vocational/technical training program on industrial electrical systems and demonstrate proficiency and expertise in the field. Must be capable of working safely on all high voltage systems, both above ground and underground. Each complete year of accredited college education in a related field may be substituted for the equivalent number of years of required experience. Must have the ability to effectively read, write, and speak the English language. Must possess a class B CDL and be able to pass drug screen. Must have experience with High Voltage systems. Rate of Pay: $29.48 per hour + $4.93 fringe per hour worked, plus 11 paid holidays, 56 hours accrued sick leave Shift: Monday-Friday 7:30am-4:00pm Positions Available: 2 Vet Pride offers a competitive compensation plan. Vet Pride Services is an equal opportunity employer - persons with disabilities and veterans are strongly encouraged to apply.

!!!Sign-On Bonus of $3,500!!! (Internal Applicants Not Eligible) Who We Are, and What We Do: At Corteva Agriscience, you will help us grow what's next. No matter what your role, you will be part of a team that is building the future of agriculture - solving the world's food problems through innovation, technology, and putting people first. Corteva Agriscience is currently seeking an Industrial Electrician to join our team at our Durant, Iowa, location. What You Will Do: Ensure operation of company equipment including electrical, mechanical, instrumentation, control devices, and HVAC, for process and facility Perform electrical repairs and scheduled inspections of equipment, following the prescribed guidelines and procedures Review and lead electrical safety program for the plant maintenance team Service, troubleshoot, and repair any problem of any electrical/mechanical nature Adherence to all quality systems & safety procedures including Environmental regulations, OSHA, and PSM procedures in everyday work routine Make recommendations for improved safety through electrical programs and/or process changes including the addition of new devices, and hardware Serve as safety program leader Various other duties as assigned Education: You have a high school diploma or equivalent What Skills You Need: You possess working knowledge and are willing and able to interpret the National Electric Code (NEC) You possess two (2) to three (3) years of Industrial Electrician / Maintenance experience You enjoy working on machines and electrical components! When there is a problem, you see an exciting opportunity to troubleshoot so you can find and implement solutions! You are willing and able to do the following with or without reasonable accommodation: Climb and/or work in elevated areas, Stand and sit for extended periods, work outdoors and indoors in hot, cold, wet, and dry conditions, lift up to fifty (50) lbs., and perform work that involves repetitive motion and lifting You have a valid US Driver's License You are comfortable with technology and possess good computer aptitude including the use of Microsoft Applications (Outlook, Word, Excel, PowerPoint, etc.), and are willing and able to learn other company-specific applications as required You know how to schedule work/jobs and you do an excellent job of following up on completion status You have high diligence can multitask, maintain an organized workplace, and have excellent problem-solving skills You value working as a team, are proactive, communicate concerns, and are accepting of change You possess good written, verbal, and interpersonal communication skills with the ability to communicate effectively with internal and external customers You uphold health and safety to the highest standard! You consistently help others and demonstrate adherence to safety protocols, policies, and procedures to ensure you and your colleagues go home safely every day You value serving your customers and know operations must be supported for optimal uptime, so you are willing and able to work the hours required of this role to achieve that mission What Makes You Stand Out: Associate or Two-Year Trade School Degree within the Technical, Electrical, or Mechanical field Journeymen license Experience with a work order and part inventory system Knowledge and/or experience with Automation and Programmable Logic Controls (PLC) Previous industrial maintenance work production equipment - electrical, mechanical, hydraulics, instrumentation and controls, HVAC, and general maintenance experience). Experience with an E-Maintenance (or similar system) for work orders and parts inventory Work Authorization and Relocation: VISA Sponsorship is NOT available for this position Relocation allowance is NOT available for this position Site Dedicated (100% at Corteva location): This role will be on-site at our Corteva location Benefits - How We'll Support You: Numerous development opportunities offered to build your skills Be part of a company with a higher purpose and contribute to making the world a better place Health benefits for you and your family on your first day of employment Four weeks of paid time off and two weeks of well-being pay per year, plus paid holidays Excellent parental leave which includes a minimum of 16 weeks for mother and father Future planning with our competitive retirement savings plan and tuition reimbursement program Learn more about our total rewards package here - Corteva Benefits Check out life at Corteva! ************************************* Are you a good match? Apply today! We seek applicants from all backgrounds to ensure we get the best, most creative talent on our team. Corteva Agriscience is an equal opportunity employer. We are committed to embracing our differences to enrich lives, advance innovation, and boost company performance. Qualified applicants will be considered without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, military or veteran status, pregnancy related conditions (including pregnancy, childbirth, or related medical conditions), disability or any other protected status in accordance with federal, state, or local laws.

Salary: D.O.E. ** Northeast Oklahoma - Northwest Arkansas - Southwest Missouri - FT Smith Area State:Oklahoma/Arkansas/Missouri Kemp Quarries Inc.,a privately-owned group of companies, is a leading producer and supplier of construction aggregates, consisting primarily of crushed stone, sand and gravel spanning NE Oklahoma, SW Missouri and NW Arkansas. Job Description Summary The primary functions of the electrician include but are not limited to Installation of new electrical equipment, troubleshooting and ensuring quality repairs to plant equipment and electrical systems in a safe, efficient and productive manner and other duties as assigned. Qualifications Must pass a drug screen and criminal background check. Licensed electrician preferred but not required Must have 2 years of three-phase experience and experience with PLC. Ability to conduct ground continuity and earth resistance tests. Ability to climb in overhead structures, to work beneath machines and in close quarters, performing analysis and repair work. Willingness to work in outdoor environment in all conditions. High degree of precision working with minimum tolerances required. High degree of attention and care required to prevent injury to others when responsible for flow or electrical power. Exposed to high voltage electricity. Strong safety leader including compliance with MSHA and OSHA safety standards. Surface Quarry, Asphalt, or Concrete plant experience a plus. Must be willing to be on call for weekend operations that operate except for when scheduled off. Currently possess and maintain a valid drivers' license and good driving record. Ability to learn to read and comprehend electrical wiring schematics. Technical electrical education helpful but degree not required. Candidate will be required to work collectively in a team environment with other co-workers and managers. Excellent verbal, written and comprehension communication skills. Willingness to do other work as needed, including labor. Willingness to work a flexible schedule, including overtime and weekends when required. Ability to work near, around or on light or heavy equipment. Key Responsibilities/Essential Functions: Regular, reliable attendance at the worksite or assigned work location. Follow all safety and environmental rules, regulations and procedures as set forth by company policies and MSHA. Follow all company policies and local, state and federal regulations for safe working procedures. Maintain electronic and process control equipment. Troubleshoot and repair AC/DC motor controls and drives. Work closely with the engineering group and outside contracted vendors to meet deadlines and complete repairs, upgrades and capital improvement projects. Assisting other electricians as needed and completing special projects. Ability and knowledge to operate mobile equipment in a safe and efficient manner. Ability to perform preventive maintenance and pre-shift inspections; repair mobile equipment as needed. Responsible for maintaining a neat and professional appearance of self, shop and work areas. Ability to comprehend and complete all needed paperwork in a timely and accurate manner. Other duties and responsibilities related to the nature of the job may be assigned on a temporary or permanent basis as needed. Education High school diploma or general education degree (GED); OR One to three years related experience and/or training; or equivalent combination of education and experience. The Benefits to You A culture that values and provides loyalty and commitment Competitive pay Comprehensive medical, dental, vision and short term disability programs 401(K) with company match Vacation and holidays

Job Description JUMPSTART, ADVANCE, AND LOVE YOUR CAREER WITH SMSI! At SMSI, we believe in our employees. With above-average pay, extensive benefits, vocational training, and a family-based atmosphere, we are always looking for people seeking to improve themselves. Together, our team strives to perform the best service possible for customers. We thrive on challenges and believe in fair compensation for dedication, detail, and professionalism. Apply today to find out how you can become a part of our team. We are seeking to add a few Apprentices and Journeyman Plumbers to join our team! You will be responsible for assembling, installing, and repairing plumbing and pipeline systems. Benefits: Medical Dental Vision 401(k) Life Insurance PTO Compensation: $16+ hourly DOE Responsibilities: Pay and responsibilities could differ based on the technician's experience and capabilities. Assemble and install plumbing systems. Troubleshoot and repair pipe and pipeline systems. Review blueprints and building codes to determine optimal work procedures. Maintain and repair septic and commercial sewer systems. Prepare written work cost estimates for clients. Adhere to safety policies and procedures. This position is safety sensitive. Qualifications: Must have an Apprentice or Journeyman Plumbing license, or ability to obtain it. OSHA 10 certification is highly preferred. Proven experience in plumbing, maintenance, or another related field. Ability to read and interpret blueprints and schematics. Strong troubleshooting and critical thinking skills. Must be thorough and have excellent attention to detail. Must be able to work independently and as part of a team with minimal supervision. Must be able to follow and identify safety procedures. Travel and occasional weekends may be needed to meet client needs. About Company SMSI is dedicated to providing the highest quality mechanical services performed in an honest, dependable, and efficient manner. SMSI offers lots of room to grow in a fast-paced company. We have been serving commercial and industrial markets for 30 years.

Job DescriptionDescription: We are currently seeking an Electrical Apprentice! You will strive to provide safe electrical systems for a variety of customers. We are looking for a hard working, knowledgeable electrician that has pride in their work. Responsibilities: Installation of new industrial, commercial, and residential equipment Install and repair electrical equipment and fixtures Install various types of conduit, raceways, and cable tray systems Install and troubleshoot PLC systems Troubleshoot motor and control systems Perform routine maintenance on electrical wiring and systems Adhere to all quality and safety codes Job Type: Full-time Benefits: Health insurance Paid time off Schedule: Monday to Friday Some weekends and holidays Work Location: In person Requirements: Qualifications: Previous experience in electrical field Familiarity with electrical schematics, blueprints, and manuals Familiarity with electrical equipment and hand tools Strong problem solving and critical thinking skills Valid Driver's license Good oral and written communication skills (English language). Strong attention to detail. Ability to work independently and unsupervised. Must be able to pass a drug test. Background check is required We are a small business that wants to stay with a few highly-skilled technicians as opposed to a bunch of mediocre talents. Quality over Quantity, always.

ELECTRICAL APPRENTICE Preferred minimum of 6 months documented field experience. Must have ability to read and interpret instructions and documentation. Plan, layout, install, and repair wiring, conduit, electrical fixtures, apparatus and control equipment. RESPONSIBILITIES - Prepares sketches showing location of wiring and equipment or follows diagrams or blueprints insuring that concealed wiring is installed before completion of future walls, ceilings, and flooring. - Measures, cuts, bends, threads, assembles and installs electrical conduit using such tools as a hacksaw, pipe threader, rules and conduit benders. - Pulls wiring through conduit, assisted by helper. - Splices wires by stripping insulation from terminal leads with knife or pliers, twisting or soldering wires together and applying tape or terminal caps. - Connects wiring to lighting fixtures and power equipment using hand tools. - Installs control and distribution apparatus, such as switches, relays and circuit- breaker panels, and fastens in place with crews or bolts using hand or power tools. - Connects power cables to equipment and installs grounding leads. - Test continuity of circuit to insure electrical compatibility and safety of components using testing instruments such as ohmmeter, battery and buzzer and oscilloscope. - Observes functioning of installed equipment or system to determine hazards and need for adjustments, relocation, or replacement. - Disassembles and repairs defective electrical equipment or systems. - Load, transport and unload material, tools, equipment and supplies. - Maintains tools and equipment. - Be able to distinguish colors. - Knowledge of certain procedures such as LOTO, etc. - Responsible for observing and complying with all safety and project rules. Performs other duties as required. QUALIFICATIONS -May require a high school diploma or its equivalent with previous years of experience in the field or in a related area. Has knowledge of commonly used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision. Primary job functions do not typically require exercising independent judgment. Typically reports to a supervisor or manager. JOB REQUIREMENTS - Rate information using personal judgment or standards that can be measured or checked. - Work within precise limits or standards of accuracy. - Perform a variety of duties which may change often. - Perform arithmetical operations rapidly and accurately. - See detail in objects or drawings as 3-dimensionsl objects. - Work at heights without fear. Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law. BENEFITS Brown and Root offers a selection of competitive lifestyle benefits which could include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, or flexible work schedule. We support career advancement through professional training and development

Campus OSU-Stillwater Contact Name & Email Brigett Broyles, *************************** Work Schedule Monday through Friday, 8:00am-5:00pm or TBD by supervisor. Appointment Length Regular Continuous/Until Further Notice Hiring Range $22.00 - $39.50 Special Instructions to Applicants For full consideration, please include a resume, and contact information for three professional references. About this Position Installation and alteration of new and existing electrical systems and equipment. Repair and maintain all types of interior and exterior electrical systems and equipment. Repair and maintain all types of motor and motor controllers. Installation, repair, and maintenance of primary high voltage distribution systems both overhead and underground. Employee in this position is required to be on rotating standby for emergencies and/or any other event after 5 p.m. weekdays, weekends and holidays. Employee in this position is required to work overtime when work requires. Employee in this position is required to work shift work when work can't be accomplished during regular hours, and when the Management staff deems necessary. Overtime is an essential function of this position and may require work during nonbusiness hours which include evenings, Saturdays and Sundays. The incumbent will be required to provide their own basic hand tools and maintain them in good working order. Must be able to perform snow and ice removal tasks, and respond at any time of the day or night when scheduled by management regardless of the weather conditions. Some irregular and extra hours as needed for projects and emergencies. Emergencies frequently involve difficult working conditions. This may require work during nonbusiness hours which include evenings, Saturdays, Sundays and when the University is closed. Position may involve exposure to the following physical danger and/or environmental hazards: Noise, wet vaults, and tunnels, working in rainstorms, snow, and dusty conditions. Seasonal considerations include heat of summer and cold during the winter. Working with high voltage, cramped areas, pole climbing, and confined spaces. This position is heavy in manual labor and requires the physical ability to lift up to 50 pounds frequently and in excess of 50 pounds occasionally. Must use appropriate personal protective equipment as required (hard hat, vest, gloves, safety glasses, etc.). These items are provided and are not for personal use. Required to work safely and promote a safe environment. OSU offers a generous benefits package for continuous, regular positions, including but not limited to health, life and retirement benefits, paid leave and 13 paid holidays per year. Other benefits include employee and dependent tuition waivers, free gym memberships, a free, confidential employee assistance program, and much more. Required Qualifications High School/GED (degree must be conferred on or before agreed upon start date) Distribution Electrician I: Two years of prior successful work experience in electrical or powerline work in a related field. Distribution Electrician II: Four years of prior successful work experience in electrical or powerline work in a related field. Distribution Electrician III: Six years of prior successful work experience in electrical or powerline work in a related field. Distribution Electrician IV: Ten years of prior successful work experience in electrical or powerline work in a related field. At least one year of experience operating heavy equipment Post-secondary education may be substituted for experience; preference given to post-secondary education in an electrical or mechanical field. Certifications, Registrations, and/or Licenses: Distribution Electrician I-III: OSU certified in trenching/shoring and confined space entry techniques within 6 months of hire as documented by the Energy Services training record. Distribution Electrician IV: OSU or other certification in trenching/shoring and confined space entry techniques. Class B Commercial Drivers License (CDL) within 12 months of hire for operation of departmental heavy equipment. Have before hire a valid Drivers License and maintain after hire for the operation of an OSU vehicle, which is required in the performance of job duties as assigned. Skills, Proficiencies, and/or Knowledge: Distribution Electrician I: Ability to assist as directed with preventative maintenance inspections, electrical asset inventory and survey update of assets in AiM CMMS system, repair and maintenance of all facets of exterior lighting and secondary voltage exterior electrical circuitry and equipment, repair of the electrical distribution system and associated overhead and underground components, including but not limited to-meters and related equipment, medium voltage cabling, vaults, transformers, and switches, according to manufacturer's instructions, blueprints, and engineering specifications, and renovation or extension of the electrical distribution and exterior secondary voltage systems. Distribution Electrician II: Ability to perform preventative maintenance inspections, electrical asset inventory and survey update of assets in AiM CMMS system, and repair and maintain all facets of exterior lighting and secondary voltage exterior electrical circuitry and equipment. Ability to assist as directed in the repair of the electrical distribution system and associated overhead and underground components, including but not limited to-meters and related equipment, medium voltage cabling, vaults, transformers, and switches, according to manufacturer's instructions, blueprints, and engineering specifications, and renovation or extension of the electrical distribution and exterior secondary voltage systems. Ability to interpret and apply relevant industry codes. Qualified in electrical distribution underground or overhead systems as indicated by Energy Services training record or capability verified by previous employer. Industry certified medium voltage splice and termination technician. Documented basic understanding of exterior secondary power and lighting systems, electrical distribution circuitry and components, and secondary voltage electrical systems within all Energy Services facilities. Distribution Electrician III: Ability to perform preventative maintenance inspections, electrical asset inventory and survey update of assets in AiM CMMS system, and repair and maintain all facets of exterior lighting and secondary voltage exterior electrical circuitry and equipment, repair of the electrical distribution system and associated overhead and underground components, including but not limited to-meters and related equipment, medium voltage cabling, vaults, transformers, and switches, according to manufacturer's instructions, blueprints, and engineering specifications, and renovation or extension of the electrical distribution and exterior secondary voltage systems. Ability to interpret and apply relevant industry codes. Qualified in electrical distribution underground or overhead systems as indicated by Energy Services training record or capability verified by previous employer. Industry certified medium voltage splice and termination technician. Documented basic understanding of exterior secondary power and lighting systems, electrical distribution circuitry and components, and secondary voltage electrical systems within all Energy Services facilities. Distribution Electrician IV: Capable of performing all duties of previous levels. Ability to oversee and perform preventative maintenance inspections and related duties according to an established maintenance schedule. Oversee and perform the repair and maintenance of all facets of exterior lighting and secondary voltage exterior electrical circuitry and equipment. Assist with establishing Electrical Distribution PM standards for new assets in AiM CMMS. Coordinate and perform all excavation permit procedures according to policy and keep permits current. Assist with procuring materials as needed for shop and for projects. Perform Electrical Distribution Assistant Supervisor duties when needed as directed. Ability to interpret and apply relevant industry codes. Qualified in electrical distribution underground or overhead systems as indicated by Energy Services training record or capability verified by previous employer. Industry certified medium voltage splice and termination technician. Documented basic understanding of exterior secondary power and lighting systems, electrical distribution circuitry and components, and secondary voltage electrical systems within all Energy Services facilities. Ability to become proficient in the use of "AiM" Computerized Maintenance Management System (CMMS) software & the use of mobile technology. Preferred Qualifications Vocational/Technical Journeyman Level Electrical, Electronic, Line Man, Motor Repair, or Data Technician.

Oak View Group Oak View Group is the global leader in venue development, management, and premium hospitality services for the live event industry. Offering an unmatched, 360-degree solution set for a collection of world-class owned venues and a client roster that includes the most influential, highest attended arenas, convention centers, music festivals, performing arts centers, and cultural institutions on the planet. Overview Under general direction, the part-time Electrician performs journeyman electrician level and leadwork duties in the technical operation, maintenance and repair of electrical generating equipment, fire and smoke detection system, HVAC, and Building Automation systems, & auxiliary systems facility wide. With support of Engineering staff, the part-time Electrician will support electrical projects in all buildings. This role will pay an hourly rate of $25.00 Benefits for Part-Time roles: 401(k) savings plan and 401(k) matching. This position will remain open until April 17, 2026. Responsibilities Track daily productivity as designated by supervisor via allocation sheets, daily logs and micro main. Communicate arrival, location and departure with Electrician supervisor. Clearly, effectively and timely communicate work issues with staff. Routinely test and maintain emergency generator and lighting. Responsible for maintenance on venue lighting fixtures - including upgrades and replacements as designated by supervisor. Installs and maintains show power for exhibit hall and arena power distribution Troubleshoot parking gate problems. Maintain all electric cords, and other equipment. Maintain clearance around electric panels, transformers, etc. Provide excellent customer service assistance to all internal and external clients. Operate, configure, program zones/ groups, create reports on Square D Power Link/ Power Logic system. Other duties as required. Qualifications Must possess High School diploma, GED or equivalent. Completed 5 Year Electrical Apprentice school. Licensed Journeyman Electrical; Master Electrician License highly desirable. Demonstrated experience with maintenance and repair of electrical power generating equipment and auxiliary highly desirable. Strong interpersonal and organizational skills. Possession of, or ability to obtain a valid driver's license. Must be able to report for emergencies as needed. Ability to communicate clearly and concisely in the English language, both orally and in writing. Must be available to work nights, weekends and holidays. Strengthened by our Differences. United to Make a Difference At OVG, we understand that to continue positively disrupting the sports and live entertainment industry, we need a diverse team to help us do it. We also believe that inclusivity drives innovation, strengthens our people, improves our service, and raises our excellence. Our success is rooted in creating environments that reflect and celebrate the diverse communities in which we operate and serve, and this is the reason we are committed to amplifying voices from all different backgrounds. Equal Opportunity Employer Oak View Group is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis (“protected class”) including, but not limited to veteran status, uniform service member status, race, color, religion, sex, national origin, age, physical or mental disability, genetic information or any other protected class under federal, state, or local law.

ELECTRICAL APPRENTICE Preferred minimum of 6 months documented field experience. Must have ability to read and interpret instructions and documentation. Plan, layout, install, and repair wiring, conduit, electrical fixtures, apparatus and control equipment. RESPONSIBILITIES * Prepares sketches showing location of wiring and equipment or follows diagrams or blueprints insuring that concealed wiring is installed before completion of future walls, ceilings, and flooring. * Measures, cuts, bends, threads, assembles and installs electrical conduit using such tools as a hacksaw, pipe threader, rules and conduit benders. * Pulls wiring through conduit, assisted by helper. * Splices wires by stripping insulation from terminal leads with knife or pliers, twisting or soldering wires together and applying tape or terminal caps. * Connects wiring to lighting fixtures and power equipment using hand tools. * Installs control and distribution apparatus, such as switches, relays and circuit- breaker panels, and fastens in place with crews or bolts using hand or power tools. * Connects power cables to equipment and installs grounding leads. * Test continuity of circuit to insure electrical compatibility and safety of components using testing instruments such as ohmmeter, battery and buzzer and oscilloscope. * Observes functioning of installed equipment or system to determine hazards and need for adjustments, relocation, or replacement. * Disassembles and repairs defective electrical equipment or systems. * Load, transport and unload material, tools, equipment and supplies. * Maintains tools and equipment. * Be able to distinguish colors. * Knowledge of certain procedures such as LOTO, etc. * Responsible for observing and complying with all safety and project rules. Performs other duties as required. QUALIFICATIONS * May require a high school diploma or its equivalent with previous years of experience in the field or in a related area. Has knowledge of commonly used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision. Primary job functions do not typically require exercising independent judgment. Typically reports to a supervisor or manager. JOB REQUIREMENTS * Rate information using personal judgment or standards that can be measured or checked. * Work within precise limits or standards of accuracy. * Perform a variety of duties which may change often. * Perform arithmetical operations rapidly and accurately. * See detail in objects or drawings as 3-dimensionsl objects. * Work at heights without fear. Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law. BENEFITS Brown and Root offers a selection of competitive lifestyle benefits which could include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, or flexible work schedule. We support career advancement through professional training and development ELECTRICAL APPRENTICE Preferred minimum of 6 months documented field experience. Must have ability to read and interpret instructions and documentation. Plan, layout, install, and repair wiring, conduit, electrical fixtures, apparatus and control equipment. RESPONSIBILITIES * Prepares sketches showing location of wiring and equipment or follows diagrams or blueprints insuring that concealed wiring is installed before completion of future walls, ceilings, and flooring. * Measures, cuts, bends, threads, assembles and installs electrical conduit using such tools as a hacksaw, pipe threader, rules and conduit benders. * Pulls wiring through conduit, assisted by helper. * Splices wires by stripping insulation from terminal leads with knife or pliers, twisting or soldering wires together and applying tape or terminal caps. * Connects wiring to lighting fixtures and power equipment using hand tools. * Installs control and distribution apparatus, such as switches, relays and circuit- breaker panels, and fastens in place with crews or bolts using hand or power tools. * Connects power cables to equipment and installs grounding leads. * Test continuity of circuit to insure electrical compatibility and safety of components using testing instruments such as ohmmeter, battery and buzzer and oscilloscope. * Observes functioning of installed equipment or system to determine hazards and need for adjustments, relocation, or replacement. * Disassembles and repairs defective electrical equipment or systems. * Load, transport and unload material, tools, equipment and supplies. * Maintains tools and equipment. * Be able to distinguish colors. * Knowledge of certain procedures such as LOTO, etc. * Responsible for observing and complying with all safety and project rules. Performs other duties as required. QUALIFICATIONS * May require a high school diploma or its equivalent with previous years of experience in the field or in a related area. Has knowledge of commonly used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision. Primary job functions do not typically require exercising independent judgment. Typically reports to a supervisor or manager. JOB REQUIREMENTS * Rate information using personal judgment or standards that can be measured or checked. * Work within precise limits or standards of accuracy. * Perform a variety of duties which may change often. * Perform arithmetical operations rapidly and accurately. * See detail in objects or drawings as 3-dimensionsl objects. * Work at heights without fear. Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law. BENEFITS Brown and Root offers a selection of competitive lifestyle benefits which could include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, or flexible work schedule. We support career advancement through professional training and development