Electronics technician jobs in Grand Forks, ND - 1,368 jobs

Job Title: TechnicianJob Description Join our dynamic team in the Module Assembly and Test Department, where you will be responsible for troubleshooting electronic systems, performing soldering on Printed Circuit Board (PCB) components, conducting routine engineering and experimental tests, and updating software and firmware. This role involves writing and updating test procedures to ensure the highest quality standards. Responsibilities + Perform calibration checks on electronic instruments. + Troubleshoot electronic systems to determine root causes and remedies for malfunctions. + Perform soldering, re-soldering, and re-flowing of PCB components. + Observe and examine equipment during testing to detect issues such as loose or missing parts, solder bridges, and shorts. + Test PCBs following repair and make necessary adjustments. + Record repair work on work orders and maintain clean and organized workspaces. + Collaborate with team members on technical requirements for repairs and projects. + Write and update test procedures. + Update software and firmware as needed. + Manage multiple tasks simultaneously. + Conduct routine engineering tests and detailed experimental testing, solving mechanical or electronics problems. Essential Skills + 3 years of relevant experience testing and troubleshooting PCBs to the component level. + Knowledge of oscilloscopes, DVMs, spectrum analyzers, and other test equipment. + Superior analytical, evaluative, and problem-solving abilities. + Hardworking, enthusiastic, honest, trustworthy, and reliable. Additional Skills & Qualifications + Associate degree in Electronics or related field, or equivalent combination of education and experience. + 4-5 years of equivalent experience in testing and troubleshooting PCBs. + IPC-7711C/7721C Endorsement Program preferred. Work Environment The work environment is clean and enjoyable, providing a supportive atmosphere for growth. The company has been rapidly expanding and recently acquired their entire building facility, with plans to further increase team size and operational capacity. Job Type & Location This is a Contract to Hire position based out of Minneapolis, MN. Pay and Benefits The pay range for this position is $29.00 - $34.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Minneapolis,MN. Application Deadline This position is anticipated to close on Jan 23, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

Who We Are At Agiliti, we believe every interaction has the power to change a life. We are a nationwide company of passionate medical equipment management experts who proudly serve hospitals and healthcare facilities to ensure quality medical equipment is in the right place at the right time for effective patient care. We value our diversity and celebrate our differences, always seeking diverse backgrounds, ideas and experiences. Make an impact in healthcare and grow your career with Team Agiliti! The Field Service Technician I conducts cost-effective maintenance on company and customer-owned medical equipment primarily located at customer sites to ensure it is functioning properly and meets customers' needs. They perform operational verification, preventive maintenance, and corrective repair service. This position will support hospitals in the Duluth area. Relocation assistance available. What is in It for You? The opportunity to make a real impact on patients' lives. Comprehensive Benefits Package. Tuition Reimbursement. Up to a 3% match on your 401K. Make any day a pay day with Daily Pay. What You Will Do in This Role Conduct cost-effective equipment inspection, maintenance, calibration, and repair service on various medical devices. Complete all paperwork and computer data entry accurately and promptly to ensure complete documentation for billing and regulatory compliance. Communicate with clinical staff on the topics of equipment features, functionality, etc. What You Will Need for This Role An associate degree in electronics, mechanical engineering, or biomedical equipment technology. Alternative qualifications include Equivalent military training or Certified Biomedical Equipment Technician (CBET). Basic computer skills; understanding of computer networks and equipment interaction. Must hold a current, valid, and unrestricted driver's license. Must have a safe driving record based on Agiliti policies. Willingness to travel periodically to support business needs. Willingness to work flexible hours, including evenings, weekends, and holidays, as well as emergency off-hours as needed to support a 24/7 schedule. The ability to lift, push and/or pull up to 75 pounds. The ability to often bend, stoop, twist, climb, crouch/squat, kneel/crawl, sit, stand and walk for extended periods of time.

EEG Technologist - Direct Hire - Bismarck, ND Schedule: Days (Variable start/end times between 7:00 AM - 5:00 PM) Employment Type: Direct Hire Pay Range: $22.50 - $36.00/hr Hours: 40 hours/week + Rotating On-Call | Day shift with flexible start and end times (between 7 AM-5 PM). Equipment Used Epic (OneChart) Natus Xltek Required Experience & Skills Minimum 1 year of experience in Neurodiagnostics / EEG. Strong understanding of EEG operation, patient preparation, and data interpretation. Preferred Certifications (Not Required) R. EEG T (Registered EEG Technologist) - Preferred RPSGT (Registered Polysomnographic Technologist) - Preferred Interested candidates can send their resumes prabhat@pacerhcs.com or can Text at 610-484-5454

advertised has been exempted from the federal civilian hiring freeze. At the FBI, we don't just hire talent-we build it from the ground up. We employ individuals who are not only ready to enhance their electronics proficiency but also looking to contribute effectively to their teams. The electronics technician role is crucial. You'll be responsible for diagnosing and resolving issues, setting up new systems, making improvements, and ensuring the proper functioning of intricate electronic systems. Your expertise extends to a wide range of interconnected subsystems, such as electronic warfare technologies, network systems, locks, alarms, and surveillance equipment deployed in various settings, including offices and vehicles. When urgent investigations demand immediate assistance, electronics technicians are there to provide their invaluable support to special agents. You excel at troubleshooting, using your problem-solving abilities to conduct maintenance and repairs and operate a variety of test equipment, both standard and specialized. From installation to maintenance and operational testing, you are adept at every phase, always striving to outpace emerging threats by pushing the boundaries of your skills in technology and network optimization. With the FBI's specialized training and professional development courses, working at the Bureau will help you become more efficient, improve your skill set, and advance your career -all while making a significant impact on national security. Set yourself apart. Apply today. HOW TO APPLY STEP 1: Click on the “Apply” button to be directed to the FBIJobs Careers website. STEP 2: Click the “Start” button to begin. You will be prompted to either sign in to continue or register with FBIJobs if you don't already have an account. STEP 3: Follow the step-by-step process to submit your interest. You will be guided through each step. You must complete all sections of the form AND ALL REQUIRED DOCUMENTS MUST BE ATTACHED to successfully submit your interest. Your resume, specifically noting relevant work experience and associated start and end dates. Other supporting documents: College transcripts, if qualifying based on education or if there is a positive education requirement. Veterans: DD 214; Disabled Veterans: DD 214, SF-15, and VA letter dated 1991 or later. Please see instructions on the site for attaching documents. SALARY LEVEL Pay level for this position: GS 7-9: $42,679.00-$67,865.00 Salary shown is the base salary for the grade levels. Salary is also commensurate with professional experience. MAJOR DUTIES Perform installation, maintenance, and operational testing required to maintain the Bureau's communication and intrusion systems in optimal condition. Perform maintenance and service functions required to obtain optimal operational capability of a wide variety of complex equipment incorporated into FM radio, radio teletype, secure telephone, data and teletype, and intrusion systems. Use test equipment and advanced techniques to perform installation, maintenance, and repair tasks as well as operational testing of the FM radio system (base stations, repeaters, remote and mobile transmitters/receivers, and personal equipment). Conduct preventive maintenance by regularly inspecting and testing equipment for reliability and accuracy to prevent breakdown. Perform corrective maintenance to restore systems that are out of operating condition through extensive analytical testing and take positive action to replace or repair deficient or malfunctioning components and units. Review pertinent technical manuals, remain current with technology, and be available to attend government-sponsored training classes. SPECIALIZED EXPERIENCE GS-7: Applicant must possess at least one year of specialized experience (SE) equivalent to the GS-5 grade level. SE is defined as follows: Assisted with the physical installation and maintenance of electronic communication systems. Conducted routine equipment tests; performed basic corrections and/or replacing defective parts. Handled, stored, and inventoried a variety of electronic equipment and components. GS-9: Applicant must possess at least one year of specialized experience (SE) equivalent to the GS-7 grade level. SE is defined as follows: In addition to the above: Performed physical installation, maintenance, and troubleshooting of electronic communication systems. Performed installations and preventive and corrective (or emergency) maintenance and service work on FM radio systems, data networks, or electronic physical security systems. Inspected equipment for adherence to standards and tolerances. KEY REQUIREMENTS Must be a U.S. citizen. Must have (or be able to obtain) a valid driver's license. Must be able to obtain a Top Secret Sensitive Compartmented Information (SCI) Clearance. Must be willing to travel as required. Must meet the FBI's Employment Eligibility requirements. EDUCATION AND EXPERIENTIAL REQUIREMENTS EDUCATION Candidates must have a bachelor's degree or higher from a U.S. accredited college or university in one of the following fields: Electronics Engineering, Electrical Engineering, Electronics Engineering Technology, Electronics Technology, Networking, Telecommunications, or Computer Science. Education may be substituted for specialized experience (SE) as follows: GS-7: Applicant must have a bachelor's degree with superior academic achievement or one full year of graduate-level education. Superior academic achievement is the completion of all the requirements of a bachelor's degree from an accredited college or Electronics Technician, DC1 1/15/26 4 of 4 university, which is based on (1) class standing, (2) grade-point average of 3.0 or higher as recorded on an official transcript or as based on courses completed during the final two years of the curriculum, or (3) honor society membership. GS-9:Applicant must have a master's or equivalent graduate degree OR two full years of progressively higher-level graduate education leading to such a degree (or LLB or JD, if related). All degrees must be verified by submitting college transcripts. The FBI is an Equal Opportunity Employer, and all qualified applicants will receive consideration for this vacancy. Unless explicitly authorized by law, selection will be made without regard to, and there will be no discrimination because of, color, race, religion, national origin, marital status, parental status, physical or mental disability, genetic information, age (40 or over), sex, pregnancy and related conditions, or on the basis of personal favoritism, or any other non-merit factors.

Job DescriptionDescription: Part - Time Measure Technician (Flooring Estimators)wanted now! If you are talented in flooring and customer service, click to apply now! You have the opportunity to travel and meet new people - best of all - help them meet their flooring needs and be your own boss! This is a 1099 contract position. *Not a remote position* Looking for talented "sub-contractors" to measure flooring installations in your area that can start ASAP! We will provide: The job assignments Tablet to use (with training - two weeks of training) Paid per measure and weekly Requirements: Requirements: Active listening skills. Friendly, customer-oriented, and professional demeanor. Math proficiency. Attention to detail. Valid driver's license with personal vehicle insurance. Reliable transportation. Smartphone (not a flip phone) and basic computer/tablet skills. Ability to pass a background check. Construction experience preferred (flooring knowledge is a bonus). Availability to visit customers in their homes Monday - Friday, 8 am to 5 pm, with evenings and weekends availability. Perks: Opportunity to travel and meet new people. Helping customers meet their flooring needs. Being your own boss. If you meet the requirements and are interested in this opportunity, click to apply now and start ASAP!

Contract Description Part - Time Measure Technician (Flooring Estimators)wanted now! If you are talented in flooring and customer service, click to apply now! You have the opportunity to travel and meet new people - best of all - help them meet their flooring needs and be your own boss! This is a 1099 contract position. *Not a remote position* Looking for talented "sub-contractors" to measure flooring installations in your area that can start ASAP! We will provide: The job assignments Tablet to use (with training - two weeks of training) Paid per measure and weekly Requirements Requirements: Active listening skills. Friendly, customer-oriented, and professional demeanor. Math proficiency. Attention to detail. Valid driver's license with personal vehicle insurance. Reliable transportation. Smartphone (not a flip phone) and basic computer/tablet skills. Ability to pass a background check. Construction experience preferred (flooring knowledge is a bonus). Availability to visit customers in their homes Monday - Friday, 8 am to 5 pm, with evenings and weekends availability. Perks: Opportunity to travel and meet new people. Helping customers meet their flooring needs. Being your own boss. If you meet the requirements and are interested in this opportunity, click to apply now and start ASAP!

Minneapolis, MN | Direct Hire | $25 - $35/hour Seeking a senior electronic technician who can troubleshoot and repair to the component level. May consider part-time for students. Electronic Technician Responsibilities: Perform calibration checks on electronic instruments. Troubleshoot an electronic system to determine root causes and remedies for malfunctions. Perform soldering/re-soldering/re-flowing of Printed Circuit Board components Observe and examine equipment before and during testing to detect specific issues, such as loose/missing parts, solder bridges, shorts, etc. Observe and test PCBs following repair and make any repair adjustments as necessary. Comply with process standards, such as recording repair work performed on work orders and maintaining clean and organized workspaces. Electronic Technician Qualifications: AAS degree in Electronics or a related field or an equivalent combination of education and experience may also be considered. 5 years of relevant experience testing and troubleshooting PCBs to the component level. Ability to apply deductive logic to troubleshoot failed circuits to sub-assembly and/or component level in analog and mixed-signal systems. Knowledge of oscilloscopes, DVMs, spectrum analyzers, and other test equipment is required. Be the first to learn about future positions by joining our Newsletter and following us on LinkedIn! Konik is an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, status as a qualified individual with a disability, or any other protected class status. Konik has been creating impactful relationships between technical talent and employers for more than 50 years. Konik has specialized in placing professional, qualified personnel in Minnesota and western Wisconsin businesses since its inception, and maintains a strong commitment to customer service.

Electrician (Journeyman) We are seeking a skilled and reliable Journeyman Electrician to join our dynamic team. This is an excellent opportunity for experienced electricians who are committed to delivering high-quality work and ensuring safety standards are met. If you have a strong work ethic and a passion for electrical systems, we invite you to apply and grow with us. Key Responsibilities: - Install, maintain, and repair electrical systems in agricultural, commercial, and industrial settings - Read and interpret electrical blueprints, technical diagrams, and schematics - Ensure all work complies with local electrical codes and safety regulations - Troubleshoot electrical issues and perform necessary diagnostics - Collaborate with project managers, contractors, and clients to complete projects on time and within budget - Maintain accurate documentation of work performed and materials used - Adhere to safety protocols and promote a safe work environment Join our team and be part of a company that values craftsmanship, safety, and professional growth. We offer competitive compensation, ongoing training, and a supportive work environment dedicated to excellence. Requirements: - Valid Journeyman Electrician license or certification - Proven experience as a journeyman electrician - Strong knowledge of electrical codes, safety standards, and best practices - Ability to read blueprints, technical diagrams, and schematics - Excellent problem-solving skills and attention to detail - Good communication and teamwork abilities - Physical ability to perform manual tasks and work in various environments - Valid drivers license and reliable transportation PI4f7dbe***********1-39320247

The City of St. Cloud is seeking a qualified and dedicated individual to fill the role of Radio Technician Coordinator. This is responsible technical and end user support work with responsibility for the support and maintenance of the City's information technologies, including 800 MHz two-way radio systems and sub-systems, personal computers (PC's), data equipment, voice communications equipment, and other telecommunications equipment and services. Work involves responsibility for preventive maintenance, response to equipment and systems operational problems, and end user support. The employee of this class is expected to work closely with vendors of support services and other employees of all City departments and divisions. Work involves providing preventive maintenance, trouble condition response and support of the City's two-way radio system and sub-systems, voice network, installed PC's, local/wide area network systems, software systems and applications, and other appropriate technologies required to meet the needs of City government. Work involves application of policies and procedures to assure the delivery of appropriate and timely support services to end users of information technology (IT) equipment and systems. Key Responsibilities: * Support and maintain all City IT equipment and systems, including PCs, printers, network devices, phones, and two-way radios. * Install, configure, repair, and perform preventive maintenance on hardware, software, wiring, and cabling for voice, data, and radio networks. * Provide routine programming, moves/adds/changes, and troubleshooting for telephone and two-way radio systems. * Maintain accurate inventories, documentation, cabling plans, and repair/maintenance records for all IT assets. * Assist with setup, installation, relocation, and reassignment of new and existing IT equipment across City facilities. * Determine when external repair or vendor services are required and verify proper operation upon return; may provide first-level, after-hours support for 24/7 departments. * Support staff by assisting with basic technology training and performing other assigned duties as needed. * Performs other work as required and assigned. View the Position Profile Benefits: The City is proud to offer a competitive healthcare package, which includes 100% employer paid premiums for single insurance and 90% employer paid premiums for family insurance. Additional health and dental benefit information is available upon request. The average annual value of family health insurance premiums is approximately $33,253. A variety of voluntary benefits are also available, including disability insurance and flexible spending accounts. See benefit overview for more information on City benefits. Retirement: An excellent retirement pension plan is provided by the city through the Public Employee Retirement Association (PERA). Paid Leave: Vacation, Sick Leave, Personal Day and Holiday Pay can be found in the applicable labor union contract. How to Apply: Send a fully completed application, resume and cover letter to Human Resources Email. The position may remain open until filled and a sufficient number of candidates can be evaluated. To learn more about the City of St. Cloud community, visit the Community Profile. Qualifications Post-secondary degree in technology equipment or related field; one year experience in support and maintenance of two-way radio, computer and telephone equipment; and ability to become certified in Allied Radio Matrix for Emergency Response (ARMER) Statewide Radio Board for programming and maintenance of two-way radios within twelve months of hire, and possession of Valid Minnesota issued driver's license that is unrestricted except for corrective lenses.

Our electronics technicians are skilled in electronic equipment design, development, evaluation, testing, installation, and maintenance. They're knowledgeable in the capabilities, limitations, operations, design, characteristics, and functional use of a variety of types and models of electronic equipment and systems related to electronic engineering. Summary Our electronics technicians are skilled in electronic equipment design, development, evaluation, testing, installation, and maintenance. They're knowledgeable in the capabilities, limitations, operations, design, characteristics, and functional use of a variety of types and models of electronic equipment and systems related to electronic engineering. Overview Help Accepting applications Open & closing dates 01/16/2026 to 01/30/2026 Salary $43,106 to - $68,549 per year Salaries listed above are the base rate on the GS pay scale. A complete list of pay tables factoring in locality pay can be found at ************ Pay scale & grade GS 7 - 9 Locations Many vacancies in the following locations: Birmingham, AL Little Rock, AR Los Angeles, CA San Francisco, CA Show morefewer locations (6) New Haven, CT Boston, MA Minneapolis, MN Kansas City, MO Nashville, TN San Antonio, TX Remote job No Telework eligible No Travel Required Occasional travel - You may be expected to travel for this position. Relocation expenses reimbursed No Appointment type Permanent Work schedule Full-time Service Excepted Promotion potential 12 Job family (Series) * 0856 Electronics Technical Supervisory status No Security clearance Sensitive Compartmented Information Drug test Yes Financial disclosure Yes Bargaining unit status No Announcement number DESTIMP-12868316-26-VL Control number 854735000 This job is open to Help The public U.S. Citizens, Nationals or those who owe allegiance to the U.S. Federal employees - Competitive service Current federal employees whose agencies follow the U.S. Office of Personnel Management's hiring rules and pay scales. Federal employees - Excepted service Current federal employees whose agencies have their own hiring rules, pay scales and evaluation criteria. Internal to an agency Current federal employees of the hiring agency that posted the job announcement. Career transition (CTAP, ICTAP, RPL) Federal employees whose job, agency or department was eliminated and are eligible for priority over other applicants. Veterans Veterans of the U.S. Armed Forces or a spouse, widow, widower or parent of a veteran, who may be eligible for derived preference Military spouses Military spouses of active duty service members or whose spouse is 100 percent disabled or died on active duty. Individuals with disabilities Individuals who are eligible under Schedule A. Clarification from the agency All U.S. Citizens. Duties Help * Perform installation, maintenance, and operational testing required to maintain the Bureau's communication and intrusion systems in optimum condition. * Perform maintenance and service functions required to obtain optimum operational capability of a wide variety of complex equipment incorporated into the FM radio, radio teletype, secure telephone, data and teletype, and intrusion Systems. * Use test equipment and advanced techniques to perform installation, maintenance and repair tasks as well as the operational testing of the FM radio system (base stations, repeaters, remote and mobile transmitters/receivers and personal equipment). * Conduct preventive maintenance by regularly inspecting and testing equipment for reliability and accuracy to prevent breakdown. * Perform corrective maintenance to restore a system which is out of operating condition through extensive analytical testing, take positive action to replace or repair deficient or malfunctioning components and units. * Review pertinent technical manuals, remain current with technology, and be available to attend government sponsored training classes. Requirements Help Conditions of employment * Must be a U.S. citizen. * Must have (or be able to obtain) a valid driver's license. * Must be able to obtain a Top Secret-SCI clearance. * Some travel may be required. Qualifications GS-7: Applicant must possess at least one (1) year of SE equivalent to the GS-5 grade level. SE is defined as follows: * Assisted with the physical installation and maintenance of electronic communication systems. * Conducted routine equipment tests; performed basic corrections and/or replacing defective parts. * Handled, stored, and inventoried a variety of electronic equipment and components. GS-9: Applicant must possess at least one (1) year of SE equivalent to the GS-7 grade level. SE is defined as follows: * Performed physical installation, maintenance, and troubleshooting of electronic communication systems. * Performed installations and preventive and corrective (or emergency) maintenance and service work on FM radio systems, data networks, or electronic physical security systems. * Inspected equipment for adherence to standards and tolerances. Education All degrees must be from an accredited college or university. Education may be substituted for specialized experience as follows: GS-7: Applicant must have a bachelor's degree with superior academic achievement or one (1) full year of graduate level education. Superior academic achievement is the completion of all the requirements of a bachelor's degree from an accredited college or university, which is based on (1) class standing, (2) grade-point average of 3.0 or higher as recorded on an official transcript, or as based on courses completed during the final two years of the curriculum, or (3) honor society membership. GS-9: Applicant must have a master's or equivalent graduate degree or 2 full years of progressively higher-level graduate education leading to such a degree or LL.B. or J.D., if related. Degrees must be in one of the following fields: Electronics Engineering, Electrical Engineering, Electronics Engineering Technology, Electronics Technology, Telecommunications, or Computer Science. Education completed in foreign colleges or universities may be used to meet the above requirements provided you can show foreign education is comparable to that received in an accredited educational institution in the United States. Additional information PHYSICAL DEMANDS Work requires strenuous physical exertion such as climbing tall ladders or towers, long periods of standing, recurring bending, crouching, stooping, stretching, reaching or similar activities; and recurring lifting heavy objects in excess of 50 pounds such as radio and related communications systems. WORK ENVIRONMENT Work involves high risks with exposure to potentially dangerous situations such as electrical shocks, falls from high towers, inclement weather conditions (rain, snow, ice, and high winds), requiring a range of safety and other precautions, including accompaniment by another technician when performing duties considered hazardous to life and limb. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help Review our benefits How you will be evaluated You will be evaluated for this job based on how well you meet the qualifications above. Your application will be evaluated using the FBI's Candidate Rating Procedures. Your resume and supporting documents will be reviewed to verify that you meet the job qualifications listed in this announcement and will be compared against your responses to the online assessment questionnaire. If your self-assessment in the vacancy questions is not supported by details in your resume or supporting documents, you may be disqualified from the Most Competitive category. Veterans' preference will be applied. Applicants must meet the qualification requirements by the closing date of this announcement. If you are found minimally qualified, your application will move forward to additional phases of the review process. The competencies will be used in a Structured Resume Review to objectively evaluate applicant resumes. Do not provide a separate narrative written statement. Rather you must describe in your resume how your past work experience demonstrates that you possess the competencies identified below. Your resume should demonstrate that you possess the following competencies. Competencies: * Communication * Electronics * Flexibility/Adaptability * Initiative * Organizing and Planning * Problem Solving/Judgment Benefits Help Review our benefits Required documents Required Documents Help * Utilizing the Resume Builder, outline your relevant work experience and associated start and end dates. Uploaded resumes will not be reviewed or used for qualification purposes. * A complete assessment questionnaire Other supporting documents (if applicable): * College transcripts, if qualifying based on education * Notification of Personnel Action, SF-50; not applicable to current FBI employees * Most recent Performance Appraisal; not applicable to current FBI employees Veterans: DD 214; Disabled Veterans: DD 214, SF-15, and VA letter dated 1991 or later * Memorandum for Record (MFR): Work performed outside assigned duties (that would not normally be documented on an SF-50, i. e., back-up duties), has to be documented in detail by an immediate supervisor in order to receive full credit for amount of time worked in that position. If no documentation is furnished no credit will be given for time worked in that position. The following notations must be specified in the documentation: * Percent of time worked in the particular position (cannot conflict with main duties. * The month/year work began Frequency worked (i.e., daily, monthly, etc.) * Specific duties performed

Job Description Ideal Aerosmith is a leading supplier of precision inertial guidance test systems, flight motion simulators, and a premier provider of aerospace test engineering services, ATE system engineering, and quality contract manufacturing services to the aerospace industry. We're experts and we earn that title everyday with our customers through innovative engineering, manufacturing, and sustainment of world-class motion and electric test solutions and services. Here, we don't just solve complex problems - we redefine what's possible. Every role at Ideal Aerosmith supports a lean culture through continuous improvement - ongoing, incremental enhancements to products, processes, or services aimed at reducing waste and boosting efficiency, customer service, and performance. With a team of skilled problem solvers and a culture that thrives on tackling challenges head-on, we are dedicated to our clients' success. Enjoy competitive benefits, a supportive work environment, and every other Friday off to recharge. Electronics Technicians build electronic test equipment and components and complete duties such as making soldering connections, installing electrical components, stripping wire, forming leads, reporting major problems to supervisors, and following safety standards. Electronics Technicians assemble or modify electrical or electronic equipment and processes through training, knowledge, and leadership. A continuous improvement mindset is essential to reach the company's goals. Job Responsibilities Assemble electronic test equipment such as cable assemblies, electro-mechanical assemblies, circuit card assemblies and electronic component assemblies Operate and program automated wire cutting and crimping equipment Conduct self and peer inspections Participate in continuous improvement activities to achieve profitability and improve quality. Document build process and redline prints as required. Work with engineering to suggest processes to facilitate improvements. Lead and work with individual project team members to help them problem solve Other duties as assigned Qualification Requirements Knowledge of electrical components and circuitry. Experience working with electrical harness building or chassis wiring preferred Computer skills required. Must be able to distinguish colors Ability to work with small objects requiring good eye/hand coordination & dexterity May be asked to travel domestically. Due to federal contract requirements, candidates must be U.S. citizens, lawful permanent residents, or protected individuals as defined by 8 U.S.C. §1324b(a)(3). Skill Requirements Monitor/Examine work to verify conformance to quality/specifications Keen attention to detail, maintains focus and limits distractions. Displays problem solving skills with the ability to break down processes into smaller processes while explaining the problem and defining the solution. Ability to think logically to comprehend assembly notes and build specs, but also interpret engineering schematics. Read and interpret wire lists, schematics, build specifications, and technical drawings. Solder electrical and electronic connections and components. Use computers to enter, access, and retrieve data. Physical Requirements Must have the ability to lift and/or carry 45 lbs. Ability to work for extended periods at computer workstation/keyboard. Ability to type accurately and efficiently. The position will require walking, standing, squatting, crouching, stooping, lifting, climbing, pulling, pushing, sitting, repetitive motion and kneeling. Ideal Aerosmith is an equal opportunity employer committed to fostering a diverse and inclusive workplace. We do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or any other characteristic protected by law. Our goal is to create a work environment that celebrates diversity and inclusion, where all employees feel respected and valued. We encourage applications from all qualified individuals and strive to provide equal employment opportunities to everyone.

The Electronic Control Technician is primarily responsible for installing, calibrating, troubleshooting and maintaining control instrumentation systems for beet and sugar processing systems. As ECT, candidates should be able to install, set up, calibrate, troubleshoot and maintain a wide variety of instrumentation and control throughout the Factory. The principle accountabilities include, but are not limited to: Technician will install control networks and program the Delta V and RS III distributive control software including other associated hardware. Optimize the performance of control loops to ensure the efficient operation of the various processing systems. Work closely with operations gaining a detailed understanding of operating parameters ensuring that maintenance interventions are both appropriate and effective. Advise operations of process adjustment so the operating practices can be adjusted correspondingly. The Technician is required to understand equipment and system operating principles and fundamentals. Job Requirements: Candidate must, at a minimum, have a 2-year technical degree The candidate must have minimum of three (3) years of instrument shop/Electronic experience in all required instrumentation fields Incumbents will be required to pass a Skills and Aptitude tests and Safety Screen. Must be computer literate possessing strong keyboarding skills, be able to navigate in a Windows Operating Environment, and must be competent in the use of a word processing software program. Able to read, write and communicate effectively. Compensation Range:$33.78 - $42.42 /hr Benefits Include:Our benefits include eligibility for comprehensive medical insurance starting on day one.In addition, we offer Pension, 401(k) retirement savings plan with a Company match, paid dental, paid basic life insurance, paid short -term disability, voluntary long-term disability, life insurance, vision insurance, health savings account, flexible spending accounts, paid time off, paid sick leave, paid parental leave, and paid holidays. We also offer tuition reimbursement, service awards, and a 24/7 employee assistance program with access to eight confidential visits with a licensed counselor at no cost. We are proud to offer such a comprehensive package to our employees and believe that it reflects our commitment to their well-being and success. An Equal Opportunity Employer

A very reputable client of ours has openings on their Systems Verification Test Team . This group is responsible for documenting and performing verification tests for hearing aids, accessories, manufacturing software, fitting software, mobile applications, programmers, their components and sub-systems. This role is also responsible for assisting in problem solving and issue resolution. This position is primarily responsible for verifying new products; however, may also be responsible for supporting continuation engineering and technology development, as needed. Job Title: Systems Verification Technician Location: Eden Prairie, MN Pay Rate: $28.85hr Education: AAS Degree in Electronics is preferred, but will consider without Experience: Any experience in electronic design, test and manufacturing is great to have Any experience in a regulated environment (medical or military) is nice to have Intermediate to advanced knowledge of microelectronic circuits and components required Intermediate to advanced knowledge of common business software required (i.e. Microsoft Office suite) Intermediate to advanced knowledge of product development processes for microelectronic circuits required Intermediate to advanced knowledge of bench top test instrumentation control and use Intermediate to advanced knowledge of verification methodologies Intermediate to advanced knowledge of software development methodologies Intermediate to advanced knowledge of ANSI, IEC, and homologation standards desirable About ManpowerGroup, Parent Company of: Manpower, Experis, Talent Solutions, and Jefferson Wells ManpowerGroup (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We develop innovative solutions for hundreds of thousands of organizations every year, providing them with skilled talent while finding meaningful, sustainable employment for millions of people across a wide range of industries and skills. Our expert family of brands - Manpower, Experis, Talent Solutions, and Jefferson Wells - creates substantial value for candidates and clients across more than 75 countries and territories and has done so for over 70 years. We are recognized consistently for our diversity - as a best place to work for Women, Inclusion, Equality and Disability and in 2022 ManpowerGroup was named one of the World's Most Ethical Companies for the 13th year - all confirming our position as the brand of choice for in-demand talent.

Are you interested in working for a company that makes a difference in people's lives? Do you want to work for a company that values its employees and supports professional development? Joining the Prism Specialties Team Provides: Teamwork: Experience what it is like to work in a team environment surrounded by people who support and encourage you along the way Learning & Development: Develop your skill set within the company by increasing your knowledge and experience in the world of electronics restoration A Day in the Life of a Consumer Electronics Technician: On-site evaluation of damaged electronics from insurance claims involving fire, water, or lightning strike damage Inventory, remove and transport electronic items and appliances from the insured's home or business Disassemble and evaluate electronic items to be cleaned, serviced, and/or repaired Test, clean, restore, and reassemble electronic items to pre-loss condition Deliver and reinstall appliances and consumer electronic items within the insured home or business What We are Looking for in You: Excellent customer service skills; provide "white glove" service for our clients Solid multi-tasking ability, prioritizing skills, and attention to details Consistently exhibit empathy and compassion Comfortable working on-site in post-peril (fire, floods, etc.) environments Ability to lift and carry 50 pounds during pick-up and delivery activities Prism Specialties specializes in the restoration of electronics, art, textiles, and documents for residential and commercial insurance claims. Compensación: $18.00 - $21.00 per hour For over 25 years, steady and calculated growth has evolved the company into a world-class operation in restoring electronics, art, textiles, and documents quickly and effectively. Since 1993 Prism Specialties has been making its mark recovering and restoring electronics specializing in both residential and commercial markets. As we strive to accommodate our customers and their restoration needs, Prism Specialties expanded into art restoration, document restoration, and textile restoration. Our teams specialize in recovery solutions for major disasters related to fire, water, lightening and vandalism. We provide high quality and cost-effective “hands-on” restoration services with appropriate turnaround times that contractors, claims professionals, and homeowners require. Those individuals who become part of our team are both knowledgeable and skilled. We offer a viable work environment with the ability to make a positive impact on the community and have more control over their future. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to Prism Specialties Corporate.

The Electrical Technician will be responsible for providing programing, troubleshooting, installation and repair of vehicle electrical, HVAC, and mechanical systems within the manufacturing industry. This position requires you to use your excellent problem-solving skills, high attention to quality and safety, and positive teamwork attitude to drive your career. Seeking candidates for our second shift, work schedule is Monday - Thursday 3:00 pm - 1:30 am. There may be overtime opportunities available on Friday. WHAT YOU WILL DO: Install and repair various Hybrid Drive systems, communication networks, and electrical components Inspect and diagnose electrical systems issues using advanced electrical theory, PLC and ladder logic Interpret blueprints, process sheets, schematics and instructions for appropriate repairs and process Maintain clean and safe work practices with electrical systems by adhering to safety policies, procedures, and processes Inspect and communicate issues that arise in the required quality checkout Document work and results with support of various software programs including, Microsoft Office Suite, Internet browsers, and diagnostic applications Install and repair electrical control components such as resistors, diodes and relays) Expand knowledge of technical and maintenance principles including how to perform work around high voltage systems (200+ volts) New Flyer is an EEO/AA/Female/Minority/Disabled/Vets Employer. Accommodations are available at all stages of the recruitment process, at the candidates' request . Requirements Experience in electrical and mechanical diagnosis and repair. High voltage experience a plus. Previous PLC, ladder logic, AC and DC system experience. Experience reading engineering documents, wiring schematics and instructions. Commitment to organizational health and safety standards and procedures. Strong problem solving and communications skills. A valued team member who builds collaborative relationships through honesty and integrity. Accountable with a strong attention to detail and quality, while meeting deadlines. Ability to bend, stoop, reach and climb up and down ladders. Flexibility to work both first (1st) or second (2nd) shift. Intermediate level computer skills preferred. Associate degree in automotive discipline, electronics, or equivalent vocational school preferred. Benefits Competitive Wages - $26.49 - 1st pay increase at 5 months $1.10/hour shift differential for 2nd shift New hire allowance - $2,500 Immediate benefit eligibility Paid holidays and vacation 401K with generous company match Relocation support available On-the-job training provided in continuous learning environment Advancement opportunities with a growing company Be part of a team who is leading the world's electrification of mass mobility

Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. Machine Shop Rework CNC/Manual Technician - 2nd Shift $2500 Sign On Bonus -$29.40/hour pay + 6 % Shift Differential Location: Lafayette, Indiana Medical/Dental/Vision/Life Insurance, Incentives/Bonus Opportunities, Matching 401k available day one. *************************** : Apply online and create a candidate account. CATERPILLAR - BUILD WHAT MATTERS What matters most to you? Is it being part of a strong team? Supporting your family? Solving global problems? You can do these and more at Caterpillar, where your work enables progress around the globe, and you contribute to meaningful work. Together, we can build what matters! This position is for Machine Shop Rework CNC/Manual Technician within the Large Power Systems Division located in our Lafayette, IN facility. Machine Shop Rework CNC/Manual Technician are responsible for the rework of all machine shop production material. May also be asked to perform rework on a variety of purchased finished material. Must be able to interpret information on blueprints, Job Instruction Sheet's, and CMM data. Will be required to understand Non-Conforming Material system and generate Non-Conforming Material tags. Job Duties/Responsibilities may include, but are not limited to: * Program, set up, and operate CNC/Manual mills, lathes, or multi-axis machines to manufacture precision components. * Create, modify, and optimize CNC/Manual programs using G-code and CAM software (e.g., Mastercam, Fusion 360, Gibbs CAM). * Interpret blueprints, engineering drawings, and CAD models to determine machining operations and tolerances. * Interpret and use MOP's, rework procedures, and acceptance criteria for all Value Streams * Select proper tooling, fixturing, and cutting parameters for efficient and accurate production. * Perform first-piece inspections and in-process quality checks using precision measuring instruments (calipers, micrometers, CMM, gauges). * Troubleshoot machining and programming issues to minimize downtime. * Maintain machines, tooling, and work area in safe and clean conditions. * Collaborate with engineers, supervisors, and other machinists to improve processes and workflow. * Document setups, processes, and program revisions for repeat production runs. Basic Qualifications: * 3+ years of CNC/Manual machining experience, set-up, and proven ability to program CNC/Manual machines. * Proficiency in G-code programming and CAM software. * Strong knowledge of machining principles, cutting tools, feeds, and speeds. * Ability to read and interpret engineering blueprints and GD&T symbols. * Skilled in using precision measuring instruments for quality checks. * Strong problem-solving skills and attention to detail. * Ability to work independently and as part of a team. * Manage time and work well with those on all shifts, including support personnel. * Working necessary overtime. NOTE #1: Must pass a CNC/Manual skill assessment in order to win position. NOTE #2: Candidate will be required to stay in the section for 5 years with the exception of a promotion or NTD's move. NOTE #3: Successful candidates will go through mandatory specific classroom training and hands on training, that will require a proficiency test and score or through observation by the trainer, leader, or other personnel. NOTE #4: After successful classroom training and on-the-job training, there will be on-the-job skill assessments that technicians must pass move onto a L5 technician. Physical Requirements: * Candidates for all positions must have the ability to work with medium to heavy duty tooling, equipment, and in a highly technical environment. * Work may involve frequent bending, stooping, and kneeling, twisting, turning, climbing, and standing on concrete for 8+ hours. * All positions also require the ability to lift 40 pounds and withstand frequent repetitive movement of hands with a variety of tooling. * Some positions require the ability to perform tasks on a moving conveyor under time constraints. * Some positions require the ability to climb ladders, stairs, work on platforms and work at heights. * Some positions require the ability to work in confined spaces. * Some positions require the ability to wear a respirator. * Must be able to lift and manipulate engine components during the assembly process. * Must be able to use hand and pneumatic tools as well as automatic torque equipment. Additional Information: * Location of this position is in Lafayette, IN * Relocation assistance is not available for this position. Any relocation costs incurred would be the responsibility of the selected applicant. * Shift: 2nd (3:30pm to 11:30pm) * 40-hour work weeks with potential for Overtime * 104 hours of paid Personal Time Off (PTO) - (Prorated based upon start date) * 11 Paid holidays * Climate controlled work environment - most areas * Clean/safe work environment * Please Attach an Updated Resume Please ensure you frequently check the e-mail account you provided on your application, including the junk/spam folder, as this is the primary correspondence method in our recruiting process. Visa Sponsorship is not available for this position. This employer is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as, H, L, TN, F, J, E, O. As a global company, Caterpillar offers many job opportunities outside of the U.S which can be found through our employment website at ***************************. #LI Summary Pay Range: $29.40 - $37.40 Compensation and benefits offered may vary depending on multiple individualized factors, job level, market location, job-related knowledge, skills, individual performance and experience. Please note that salary is only one component of total compensation at Caterpillar. Benefits: Subject to plan eligibility, terms, and guidelines. This is a summary list of benefits. * Medical, dental, and vision benefits* * Paid time off plan (Vacation, Holidays, Volunteer, etc.)* * 401(k) savings plans* * Health Savings Account (HSA)* * Flexible Spending Accounts (FSAs)* * Health Lifestyle Programs* * Employee Assistance Program* * Voluntary Benefits and Employee Discounts* * Career Development* * Incentive bonus* * Disability benefits * Life Insurance * Parental leave * Adoption benefits * Tuition Reimbursement * These benefits also apply to part-time employees Posting Dates: January 15, 2026 - January 27, 2026 Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community.

Koozie Group If our name sounds familiar, there's a reason why. We're the people behind the iconic Koozie Can Kooler - and more! As one of the largest suppliers in the promotional products industry, you've probably seen our work everywhere from your local bank to a large concert or sporting event. We imprint company logos and slogans on everything from pens to coffee tumblers, lunch bags, tech accessories, camp chairs, and award-winning calendars, to name just a few. Our desire to benefit our people, customers, communities, and industry is behind all that we do. We call it Keep It. Give It., and it ensures that we are leaving a positive, lasting impact with the products and solutions we deliver. We're looking for the right person to fill this role. Read on if you want to know more and discover how we like to keep the good going ! Hours: Friday-Sunday: 5:00am - 5:00pm Pay Rate: $28.00 - $35.00/hr. (eligible for $3,000 sign-on bonus) Location: Red Wing, Minnesota Why join the Koozie Group team? People First culture Flexible Schedules Climate controlled environment (Clean and Heat/AC!) Great Benefits (Health, Dental, Vision, 401k with match, and more!) Paid Time Off (Vacation, Sick, Personal) Tuition Reimbursement Advancement Opportunities Employee Referral Bonus Program Annual Performance Reviews Job Description for Mechatronic Technician: The Mechatronic Technician maintains, troubleshoots, and repairs industrial equipment and machinery, with a focus on electrical, pneumatic, and robotic equipment. Diagnose and troubleshoot problems, dismantle/reassemble machines, replace defective parts, and makes necessary adjustments to ensure efficient operation. Most of the time spent will be addressing equipment repairs, assisting with complex changeovers, and completing PM's. This position requires a broad technical knowledge of electromechanical principles and good working knowledge of manufacturing machines and processes. Candidate must have a strong technical aptitude and analytical problem-solving skills. Job Responsibilities for Mechatronic Technician: Assemble, install, and maintain mechanical and electronic components and systems. Diagnose and troubleshoot issues in mechatronic systems and equipment. Perform routine maintenance and calibration of mechatronic machinery. Collaborate with engineers to design and improve mechatronic systems. Interpret technical drawings, schematics, and manuals to ensure accurate assembly and repair. Document and report on system performance, maintenance activities, and repairs. Conduct testing and validation of new systems and components. Ensure compliance with safety regulations and industry standards. Upgrade and modify existing systems for improved performance and efficiency. Provide technical support and training to other team members and clients. Maintain inventory of tools, parts, and supplies necessary for repairs and maintenance. Implement quality control measures to ensure the reliability of systems and components. Job Requirements for Mechatronic Technician: Associate degree in Mechatronics, Mechanical Engineering, or a related field. Minimum of 2 years of experience in a mechatronic or related technical role. Proficiency in reading and interpreting mechanical blueprints, electrical schematics, and technical drawings. Strong knowledge of PLC programming and troubleshooting. Experience with robotics, automation systems, and control systems. Familiarity with CAD software for design and modification tasks. Ability to use diagnostic tools and equipment for troubleshooting mechanical and electrical issues. Strong understanding of safety protocols and procedures in a manufacturing environment. Excellent problem-solving skills and attention to detail. Ability to work independently and as part of a multidisciplinary team. Strong communication skills for effective collaboration with engineers and other technicians. Willingness to work flexible hours, including overtime and weekends, if needed. Physical ability to lift heavy equipment and stand for extended periods. Valid driver's license and reliable transportation. Our customers come from all walks of life and so do we. We hire great people from a wide variety of backgrounds, not just because it's the right thing to do but because it makes our company stronger. If you share our values and our enthusiasm to keep the good going , you will find your way at Koozie Group. Koozie Group is proud to be an Equal Opportunity Employer. We do not discriminate against any applicant or employee based on race, age, sex (including pregnancy, childbirth, or related medical conditions), gender, marital status, national origin, ancestry, citizenship status, mental or physical disability, religion, creed, color, sexual orientation, gender identity or expression (including transgender status), veteran status, genetic information, or any other characteristic protected by applicable federal, state, or local law. Koozie Group also prohibits harassment of applicants and employees based on any of these protected categories. In compliance with the Americans with Disabilities Act, Koozie Group will provide reasonable accommodations to qualified individuals with disabilities and encourages both prospective and current employees to discuss potential accommodations with the employer.

Koozie GroupIf our name sounds familiar, there's a reason why. We're the people behind the iconic Koozie Can Kooler - and more! As one of the largest suppliers in the promotional products industry, you've probably seen our work everywhere from your local bank to a large concert or sporting event. We imprint company logos and slogans on everything from pens to coffee tumblers, lunch bags, tech accessories, camp chairs, and award-winning calendars, to name just a few. Our desire to benefit our people, customers, communities, and industry is behind all that we do. We call it Keep It. Give It., and it ensures that we are leaving a positive, lasting impact with the products and solutions we deliver. We're looking for the right person to fill this role. Read on if you want to know more and discover how we like to keep the good going ! Hours: Friday-Sunday: 5:00am - 5:00pm Pay Rate: $28.00 - $35.00/hr. (eligible for $3,000 sign-on bonus) Location: Red Wing, Minnesota Why join the Koozie Group team? People First culture Flexible Schedules Climate controlled environment (Clean and Heat/AC!) Great Benefits (Health, Dental, Vision, 401k with match, and more!) Paid Time Off (Vacation, Sick, Personal) Tuition Reimbursement Advancement Opportunities Employee Referral Bonus Program Annual Performance Reviews Job Description for Mechatronic Technician: The Mechatronic Technician maintains, troubleshoots, and repairs industrial equipment and machinery, with a focus on electrical, pneumatic, and robotic equipment. Diagnose and troubleshoot problems, dismantle/reassemble machines, replace defective parts, and makes necessary adjustments to ensure efficient operation. Most of the time spent will be addressing equipment repairs, assisting with complex changeovers, and completing PM's. This position requires a broad technical knowledge of electromechanical principles and good working knowledge of manufacturing machines and processes. Candidate must have a strong technical aptitude and analytical problem-solving skills. Job Responsibilities for Mechatronic Technician: Assemble, install, and maintain mechanical and electronic components and systems. Diagnose and troubleshoot issues in mechatronic systems and equipment. Perform routine maintenance and calibration of mechatronic machinery. Collaborate with engineers to design and improve mechatronic systems. Interpret technical drawings, schematics, and manuals to ensure accurate assembly and repair. Document and report on system performance, maintenance activities, and repairs. Conduct testing and validation of new systems and components. Ensure compliance with safety regulations and industry standards. Upgrade and modify existing systems for improved performance and efficiency. Provide technical support and training to other team members and clients. Maintain inventory of tools, parts, and supplies necessary for repairs and maintenance. Implement quality control measures to ensure the reliability of systems and components. Job Requirements for Mechatronic Technician: Associate degree in Mechatronics, Mechanical Engineering, or a related field. Minimum of 2 years of experience in a mechatronic or related technical role. Proficiency in reading and interpreting mechanical blueprints, electrical schematics, and technical drawings. Strong knowledge of PLC programming and troubleshooting. Experience with robotics, automation systems, and control systems. Familiarity with CAD software for design and modification tasks. Ability to use diagnostic tools and equipment for troubleshooting mechanical and electrical issues. Strong understanding of safety protocols and procedures in a manufacturing environment. Excellent problem-solving skills and attention to detail. Ability to work independently and as part of a multidisciplinary team. Strong communication skills for effective collaboration with engineers and other technicians. Willingness to work flexible hours, including overtime and weekends, if needed. Physical ability to lift heavy equipment and stand for extended periods. Valid driver's license and reliable transportation. Our customers come from all walks of life and so do we. We hire great people from a wide variety of backgrounds, not just because it's the right thing to do but because it makes our company stronger. If you share our values and our enthusiasm to keep the good going , you will find your way at Koozie Group. Koozie Group is proud to be an Equal Opportunity Employer. We do not discriminate against any applicant or employee based on race, age, sex (including pregnancy, childbirth, or related medical conditions), gender, marital status, national origin, ancestry, citizenship status, mental or physical disability, religion, creed, color, sexual orientation, gender identity or expression (including transgender status), veteran status, genetic information, or any other characteristic protected by applicable federal, state, or local law. Koozie Group also prohibits harassment of applicants and employees based on any of these protected categories. In compliance with the Americans with Disabilities Act, Koozie Group will provide reasonable accommodations to qualified individuals with disabilities and encourages both prospective and current employees to discuss potential accommodations with the employer.

Koozie GroupIf our name sounds familiar, there's a reason why. We're the people behind the iconic Koozie Can Kooler - and more! As one of the largest suppliers in the promotional products industry, you've probably seen our work everywhere from your local bank to a large concert or sporting event. We imprint company logos and slogans on everything from pens to coffee tumblers, lunch bags, tech accessories, camp chairs, and award-winning calendars, to name just a few. Our desire to benefit our people, customers, communities, and industry is behind all that we do. We call it Keep It. Give It., and it ensures that we are leaving a positive, lasting impact with the products and solutions we deliver. We're looking for the right person to fill this role. Read on if you want to know more and discover how we like to keep the good going ! Hours: Friday-Sunday: 5:00am - 5:00pm Pay Rate: $28.00 - $35.00/hr. (eligible for $3,000 sign-on bonus) Location: Red Wing, Minnesota Why join the Koozie Group team? People First culture Flexible Schedules Climate controlled environment (Clean and Heat/AC!) Great Benefits (Health, Dental, Vision, 401k with match, and more!) Paid Time Off (Vacation, Sick, Personal) Tuition Reimbursement Advancement Opportunities Employee Referral Bonus Program Annual Performance Reviews Job Description for Mechatronic Technician: The Mechatronic Technician maintains, troubleshoots, and repairs industrial equipment and machinery, with a focus on electrical, pneumatic, and robotic equipment. Diagnose and troubleshoot problems, dismantle/reassemble machines, replace defective parts, and makes necessary adjustments to ensure efficient operation. Most of the time spent will be addressing equipment repairs, assisting with complex changeovers, and completing PM's. This position requires a broad technical knowledge of electromechanical principles and good working knowledge of manufacturing machines and processes. Candidate must have a strong technical aptitude and analytical problem-solving skills. Job Responsibilities for Mechatronic Technician: Assemble, install, and maintain mechanical and electronic components and systems. Diagnose and troubleshoot issues in mechatronic systems and equipment. Perform routine maintenance and calibration of mechatronic machinery. Collaborate with engineers to design and improve mechatronic systems. Interpret technical drawings, schematics, and manuals to ensure accurate assembly and repair. Document and report on system performance, maintenance activities, and repairs. Conduct testing and validation of new systems and components. Ensure compliance with safety regulations and industry standards. Upgrade and modify existing systems for improved performance and efficiency. Provide technical support and training to other team members and clients. Maintain inventory of tools, parts, and supplies necessary for repairs and maintenance. Implement quality control measures to ensure the reliability of systems and components. Job Requirements for Mechatronic Technician: Associate degree in Mechatronics, Mechanical Engineering, or a related field. Minimum of 2 years of experience in a mechatronic or related technical role. Proficiency in reading and interpreting mechanical blueprints, electrical schematics, and technical drawings. Strong knowledge of PLC programming and troubleshooting. Experience with robotics, automation systems, and control systems. Familiarity with CAD software for design and modification tasks. Ability to use diagnostic tools and equipment for troubleshooting mechanical and electrical issues. Strong understanding of safety protocols and procedures in a manufacturing environment. Excellent problem-solving skills and attention to detail. Ability to work independently and as part of a multidisciplinary team. Strong communication skills for effective collaboration with engineers and other technicians. Willingness to work flexible hours, including overtime and weekends, if needed. Physical ability to lift heavy equipment and stand for extended periods. Valid driver's license and reliable transportation. Our customers come from all walks of life and so do we. We hire great people from a wide variety of backgrounds, not just because it's the right thing to do but because it makes our company stronger. If you share our values and our enthusiasm to keep the good going , you will find your way at Koozie Group. Koozie Group is proud to be an Equal Opportunity Employer. We do not discriminate against any applicant or employee based on race, age, sex (including pregnancy, childbirth, or related medical conditions), gender, marital status, national origin, ancestry, citizenship status, mental or physical disability, religion, creed, color, sexual orientation, gender identity or expression (including transgender status), veteran status, genetic information, or any other characteristic protected by applicable federal, state, or local law. Koozie Group also prohibits harassment of applicants and employees based on any of these protected categories. In compliance with the Americans with Disabilities Act, Koozie Group will provide reasonable accommodations to qualified individuals with disabilities and encourages both prospective and current employees to discuss potential accommodations with the employer.