Engineering internship jobs in Bethel, CT - 132 jobs

Introduction to the job ASML US brings together the most creative minds in science and technology to develop lithography machines that are key to producing faster, cheaper, more energy-efficient microchips. We design, develop, integrate, market and service these advanced machines, which enable our customers - the world's leading chipmakers - to reduce the size and increase the functionality of their microchips, which in turn leads to smaller, more powerful consumer electronics. Our headquarters are in Veldhoven, the Netherlands, and we have 18 office locations around the United States including main offices in Chandler, Arizona, San Jose and San Diego, California, Wilton, Connecticut, and Hillsboro, Oregon. ASML is seeking a summer intern to join the Defectivity Group in the Wilton, CT location. Within ASML, the Development & Engineering (D&E) sector is responsible for the specification and design of ASML products. The Defectivity group is responsible for creating the perfect environment within the vacuum reticle modules in cutting edge EUV lithography machines. We take many approaches, such as designing the gas flow in vacuum, choosing the correct materials and designing cleanliness processes. As ASML pushes the boundaries of nanotechnology beyond current state of the art, we need to study nanoparticle behavior in new ways. We are looking for someone to help pioneer knowledge in this developing area. Role and responsibilities Design of experiments for a wide range of project needs. Derive conclusions from analysis to make practical recommendations. Technical writing and communication skills, including the ability to present results based on scientific evidence to audiences of a wide range of technical abilities Take direction from ASML System Architects and Senior Engineering mentors who are leading the development effort of critical large capital equipment. As an intern in the Defectivity group you will participate in developing portions of the lithography system and/or associated tooling and test equipment. You will work on sub-systems involving robotics, mechatronics, precision mechanics, and/or opto-mechanics. You will need to consider engineering specifications and performance, lifetime, failure modes, root cause analysis, statistical analysis, measurement system capability, etc. You will collaborate with system architects and engineers in a multidiscipline project team to develop concepts, perform engineering analysis, build and test prototypes, design experiments, and/or analyze data. Education and experience Pursuing Bachelor's or Masters, with at least 2 years completed in a Materials Science, Chemistry, Chemical Engineering Physics, Mechanical Engineering Skills Tribology: wear resistance of coatings and materials Physics: plasma, electrostatics and materials compatibility Mechanical: Small particle behavior in gas flows and high vacuum Software: Data analysis and image processing for particle adder detection Electrical: Test equipment hardware and software, scripting in Python or Matlab Chemistry: chemical cleaning methods for vacuum grade cleaning, characterization of coatings, surface treatments Team player willing to work with high level problem solvers on a daily basis. Genuine interest in materials science, engineering, and analysis, as well as in developing precision systems that can perform reliably at customer sites High energy, self-motivated, quick study, flexible nature. Customer-centric personal ethos. Ability to handle multiple projects and tasks concurrently and with minimal guidance. Additional Responsibilities: There is potential for exposure to strong magnetic fields, high voltage and currents. This position requires access to controlled technology, as defined in the United States Export Administration Regulations (15 C.F.R. § 730, et seq.). Qualified candidates must be legally authorized to access such controlled technology prior to beginning work. Business demands may require ASML to proceed with candidates who are immediately eligible to access controlled technology. Inclusion and diversity ASML is an Equal Opportunity Employer that values and respects the importance of a diverse and inclusive workforce. It is the policy of the company to recruit, hire, train and promote persons in all job titles without regard to race, color, religion, sex, age, national origin, veteran status, disability, sexual orientation, or gender identity. We recognize that inclusion and diversity is a driving force in the success of our company. Need to know more about applying for a job at ASML? Read our frequently asked questions. Request an Accommodation ASML provides reasonable accommodations to applicants for ASML employment and ASML employees with disabilities. An accommodation is a change in work rules, facilities, or conditions which enable an individual with a disability to apply for a job, perform the essential functions of a job, and/or enjoy equal access to the benefits and privileges of employment. If you are in need of an accommodation to complete an application, participate in an interview, or otherwise participate in the employee pre-selection process, please send an email to USHR_Accommodation@asml.com to initiate the company's reasonable accommodation process. Please note: This email address is solely intended to provide a method for applicants to initiate ASML's process to request accommodation(s). Any recruitment questions should be directed to the designated Talent Acquisition member for the position.

Department Engineering Employment Type Internship Location New Haven, CT Workplace type Hybrid Compensation $25.00 / hour Key Responsibilities Skills, Knowledge and Expertise Why You'll Love Working with Us About Fuss & O'Neill Fuss & O'Neill is a civil and environmental engineering firm that provides client-specific, forward-thinking, and holistic solutions. Since 1924, we have made it our mission to improve the built and natural environments in response to our public and private clients' evolving needs.

Introduction Werfen Werfen is a growing, family-owned, innovative company founded in 1966 in Barcelona, Spain. We are a worldwide leader in specialized diagnostics in the areas of Hemostasis, Acute Care Diagnostics, Transfusion, Autoimmunity, and Transplant. Through our Original Equipment Manufacturing (OEM) business line, we research, develop, and manufacture customized assays and biomaterials. We operate directly in 30 countries, and in more than 100 territories through distributors. Our Headquarters and Technology Centers are located in the US and Europe, and our workforce is more than 7,000 strong. Our success comes from a specific focus in these rapidly evolving diagnostic areas, our commitment to customers, and our dedication to innovation and quality. We're passionate about providing healthcare professionals the most valuable and complete solutions to improve hospital efficiency and enhance patient care. Overview Overview: The purpose of the internship is to provide meaningful professional hands-on experience to students with leadership potential and proven academic performance. Werfen hires students majoring in Engineering and Life Sciences fields into this internship program based on business need. Ideal candidates will combine technical and business knowledge with analytical strength and creative problem-solving abilities. Responsibilities Position Description To perform entry level work of a routine nature requiring application of standard techniques, procedures and criteria in carrying out a sequence of related tasks. Design and install new plexiglass guards on equipment Utilize SAP for spare parts management Scope, plan and execute Engineering Change Order requests issued internally. Requests include improvements of manufacturing efficiencies, implementation of engineering changes, improvements of product quality, and resolution of technical issues in a production line Perform element of a Process Validation (IQ/OQ/PQ). Participate in activities related to new Product Introductions The Intern will be involved in the day-to-day activities of the team included aiding other departments as they relate to department projects. We expect the intern to gain an in-depth knowledge of the product and its associated processes, particularly the process activities in-which they will be directly involved. The intern will have opportunities to assist in nearly all aspects of the workflow. Key Attributes Requires confidence in using Microsoft Word and Excel tools. Requires Enthusiasm, motivation, initiative and ability to work within an interactive and energetic workplace. Review process procedures, change orders, equipment specifications, validation plans, and reports. Performs research on technology, equipment and tooling to improve process quality, yield or cost. Generates proposals based on research. Assistance in creating, reviewing and maintaining department files. Performs experiments, analyzes and interprets numerical data from experiments. Summarizes findings by computer readouts, statistical summaries, graphs and other methods. Qualifications Minimum Knowledge & Experience Required for the Position: Currently pursuing B.S. in Engineering with a minimum of 2 college semesters complete. Ability to multitask. The hourly wage range Werfen reasonably expects to pay for the position is $21 to $26. Compensation is reasonably based upon multiple factors including education, relevant experience, skillset, knowledge, and specific needs of the business. Closing If you are interested in constantly learning and being challenged on a daily basis we encourage you to submit your resume or CV. Werfen is an Equal Opportunity employer and is committed to a diverse workplace. Werfen strictly prohibits unlawful discrimination, harassment or retaliation based upon an individual's race, color, religion, gender, sexual orientation, gender identity/expression, national origin/ancestry, age, mental/physical disability, medical condition, marital status, veteran status, or any other protected characteristic as defined by applicable state or federal law. If you have a disability and need an accommodation in relation to the online application process, please contact ****************************** for assistance. We operate directly in over 30 countries, and in more than 100 territories through distributors. Annual revenue is approximately $2 billion and more than 7,000 employees around the world comprise our Werfen team. **************

Job Description Amphenol Communications Solutions (ACS), a division of Amphenol Corporation, is a world leader in interconnect solutions for Communications, Mobile, RF, Optics, and Commercial electronics markets. Amphenol Corporation is one of the world's largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable. ACS has an expansive global presence in research and development, manufacturing, and sales. We design and manufacture a wide range of innovative connectors as well as cable assemblies for diverse applications including server, storage, data center, mobile, RF, networking, industrial, business equipment, and automotive. Position: Mechanical Engineering Intern 2026Summer Intern Program Location: Hamden, CT Amphenol Spectra-Strip is enabling the electronics revolution with wire and cable solutions. We are the market leader for products that power the internet, cloud compute and artificial intelligence. We make components that run at 224Gbps per lane and can download 100 full length HD movies in a single second. Amphenol is a great place with outstanding engineers working on the fastest signals, with all the software and equipment needed to be successful. We are currently seeking a Product Development Engineer to join our team to lead product innovation in design, validation, and launch phases. RESPONSIBILITIES: This role supports our Mechanical Engineering group. You will work closely with internal engineers and manufacturing personnel, supporting the development and validation of product prototypes through polit production. This position also works within the production area, creating and testing designs. What you'll do: Gain Experience! Support the product design effort through analysis, testing, and deployment Generating detailed technical drawings Gather test data to support R&D activities Support production with fixture designs Identify process deficiencies and help develop solutions to improve those deficiencies QUALIFICATIONS: A good candidate should be at least a sophomore in a Mechanical Engineering program Experience with solid modeling tools (SolidWorks) Ability to communicate with technical & non-technical people Ability to work in team environment Amphenol Corporation is proud of our reputation as an excellent employer. Our main focus is to provide the highest level of support and responsiveness to both our employees and our customers, the world's largest technology companies. Amphenol Corporation offers the opportunity for career growth within a global organization. We believe that Amphenol Corporation is unique in that every employee, regardless of his or her position, has the ability to positively impact the business. This position requires access to controlled technology that is subject to US export controls. Qualified candidates must be a US Person (including US Citizen, lawful permanent resident, or protected individual as defined by 8 U.S.C. 1324b(a)(3)) or eligible to obtain required authorization(s) from the U.S. Government. Amphenol is an "Equal Opportunity Employer" - Minority/Female/Disabled/Veteran/Sexual Orientation/Gender Identity/National Origin For additional company information please visit our website at ****************************

Ready to turn your classroom knowledge into real impact? Join our team in Cheshire, CT, and work alongside experienced engineers who are shaping the future of resilient water infrastructure across New England! This internship offers candidates the opportunity to work on a wide range of water-resource-related projects, including stream and river restoration, bank erosion monitoring, turbidity reduction, flood mitigation, geomorphic assessment, and design of culverts to accommodate aquatic organism passage. We are SLR Consulting (US), a 500+ coast-to-coast team of advisory, environmental/engineering, and regulatory professionals. We deliver environmental and sustainability services to our clients through the integration of over 30 advisory, technical environmental, and engineering disciplines to help clients address some of their most complex challenges around sustainability. We are Making Sustainability Happen. As our new Water Resource Engineer Intern, you will play an important role on a team whose work is essential to achieving this goal. Responsibilities: Support the planning, analysis, and design of water resources and stormwater projects, including hydraulic/hydrologic modeling, watershed studies, flood mitigation, green infrastructure, and stream restoration. Assist with data collection, GIS mapping, field evaluations, and construction observation. Work with engineering teams to prepare drawings, technical reports, and project documentation. Contribute to innovative, sustainable solutions that protect communities and improve water quality. Working @ SLR With us, there is no doubt you'll grow your subject-matter expertise and industry knowledge. We care about investing in our employees for the long-run, and if you ask our team, they'll tell you that's just one of the many benefits of working here. We want to be a place where you can experience career growth and satisfaction for many years. Here's what else you'll enjoy as part of our team: SLR offers internships to help students get practical work experience in their chosen field. The internship is a temporary, seasonal position beginning in May through August 2026. The hourly range for this position is $20- $25. Final agreed upon compensation will be commensurate with individual education, professional designation, experience, internal parity, and location. This is a non-benefits eligible position. Qualifications/Education/Memberships: Pursuing a B.S. or M.S. in Civil Engineering, Environmental Engineering, Water Resources, or a related discipline. Coursework or interest in hydrology/hydraulics, stormwater management, or environmental systems. Experience with GIS, Civil3D, HEC-RAS, HEC-HMS, or similar tools a plus. Strong communication skills, eagerness to learn, and a collaborative mindset. Valid driver's license and ability to support field work as needed. Proficient with Microsoft Office Suite of software. Diversity, equity, and inclusion (DE&I) are at the core of who we are and want to be. SLR is proud to be an Equal Employment Opportunity / Affirmative Action Employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, gender, sexual orientation, civil union status, age, citizenship, marital status, disability, gender identity or expression, genetic information, or veteran status. At SLR, we embrace diverse cultures, perspectives, skills, and experiences within and outside our organization. We respect and celebrate differences and want to ensure that we continuously strive to build a place where everyone feels included and is encouraged to be their authentic self. We are committed to these values, and our SLR Culture & Diversity Team works to actively promote diversity, equity, and inclusion across our people and talent processes, operations, and client work around the world. If you have a disability and need reasonable accommodations at any point in the application or interview process, please contact us at careers-us@slrconsulting.

At Cahoot, we are a team of rebels rewriting the rules of fulfillment. Who dream of a better solution to surviving and thriving in the new retail world of ecommerce. We are working tirelessly to imagine and build a new future of order fulfillment like the world has never seen before, and so are our network members. They see things differently, like we do. They are the true innovators and the change agents who are pushing ecommerce forward. We came up with a solution no one imagined before, a peer-to-peer network of merchants working together to fulfill each other's orders! Our revolutionary order fulfillment and shipping optimization cuts down the distance packages need to travel, enabling merchants to choose ground shipping while delivering orders faster. Ground shipping produces 85% less CO2 emissions and costs up to 50% less compared to air cargo, it's a win-win for the planet and you whenever we optimize your order! Job Description As Cahoot's business continues to experience rapid growth, we are in need of rock-star full stack engineers to help us build secure, scalable, and reliable products. You will be responsible for designing, building, and maintaining our software and infrastructure that helps merchants optimize their fulfillment. You will be deeply involved in the technical details of building highly available and reliable services, while also working with product teams to enable Cahoot to rapidly build new capabilities for our merchants. Primary Duties and Responsibilities: Under the supervision of our senior developers, you will implement solutions that employ leading edge Microsoft technologies C#, MVC, JavaScript, Bootstrap, HTML/CSS, ASP.NET, MS SQL Server, IIS 8.0/8.5, WCF, JSON, TFS and Amazon AWS. You will contribute to the development and deployment of Cahoot's Internet based application by personally implementing complex, specialized or highly technical components of the system. You will participate in formal QA methodologies and efficient release engineering processes in an Agile or XP environment. Qualifications Coding experience in HTML, .NET Core, ASP.NET, C#, XML, and JavaScript Software experience in Microsoft SQL Server, Visual Studio, VS.NET, Site Server and IIS in Microsoft Windows environment Exposure to developing web-services and implementing a service-oriented architecture (SOA) Experience within the Microsoft web environment . (NUnit, FxCop, and Nant are a plus.) Any exposure to industry-standard software development methodologies, e.g. use of case-driven and test-driven iterative software development methodologies (Scrum, XP) Any exposure to debugging, code-reviewing, code-refactoring and performance tuning. Any exposure to version control, issue tracking, and build/release management. Any exposure to rapid development cycles. GPA > 3.5 and 3+ years of professional software development experience a MUST Knowledge of scripting tools (Python) is a plus You should be confident with application development and execution environment as well as familiar with a structured development methodology and process. The ability to set and achieve goals in a complex and fast-moving environment, great interpersonal skills and a high energy level are a must. Additional Information We are easily accessible by public transportation and conveniently located within a 5-minute drive from the Bridgeport Metro-North train station. We have a demanding hiring process that includes skill assessments, a practical assignment, a background check, and an in-person interview to help ensure that the company culture is a good fit for any new team members. Fast-paced environment with competing priorities. A snack-filled kitchen and fridge + free lunch Fridays + monthly company happy hours + quarterly company family outings! Fun, energetic, and highly driven colleagues. Only direct applicants need apply. No recruiters, please.

Purpose and Scope: Gain professional experience in a manufacturing setting. Required Skills, Education and Experience: • Pursuing a Bachelor's degree in Mechanical or Manufacturing Engineering • Excellent verbal and written communication skills • MS Office proficient • Experience with group work environments

We are seeking a Software Engineer intern with a passion for building applications that have a positive impact on the world around us; making people happier, safer and more secure. You will be a key contributor working closely with internal teams on the automation of processes and technology initiatives and projects. Our ideal candidates will have strong business analysis and requirements gathering skills. You will be responsible for demonstrating effective problem resolution skills, communicating technical solutions clearly and effectively and working cooperatively within the IT team. You will succeed if you are a great community ambassador and can drive hard technical conversations towards a beneficial solution. Applied Visions is an established software development company focused on creating visual software solutions to solve complex problems across multiple industries. With more than thirty years of experience, our team delivers results for a wide range of projects and products. The custom applications we develop help our customers grow their business, run smoothly and efficiently, and add top-line revenue. Software Engineer Job Duties and Responsibilities Work closely with our technical leads to assist our clients in developing their vision, gathering requirements, shaping projects and building solutions; Support all phases of the product development cycle from product definition/design through implementation - including requirements gathering, testing, debugging, and rework; Develop high-quality, deliverable software with little management intervention or oversight. Software Engineer Intern Job Requirements and Qualification Experience with .NET, C#, MVC; WinForms; Experience with relational databases and SQL; Knowledge of JavaScript, JQuery, Ajax and HTML/CSS/Bootstrap; Working toward a Bachelor's degree in Computer Science, Engineering, or a related field Nice-to-haves: Experience with WPF and/or WCF; Understanding of ASP.NET and JavaScript; Familiarity with other languages and platforms, including Java, Android, or iOS; Experience with Xamarin cross-platform mobile development; Previous knowledge working with Agile methodology; Grasp of software assurance tools and techniques.

We're Watts. Together, we're reimagining the future of water. We feel proud every day about what we do. We're all part of the same crucial mission, no matter what function we support -- it's to provide safe, clean water for the world, and to protect our planet's most valuable resource. What we do: For 150 years, Watts has built best-in-class products that are trusted by customers in residential and commercial settings across the world. We are at the forefront of innovation, working with cutting-edge technology to provide smart and connected, sustainable water solutions for the future. Watts is a leading brand with a quality reputation - and we have a dynamic future ahead. The Watts Internship Program is your chance to bring what you've learned in the classroom to life! You'll dive into real-world projects, gaining hands-on experience while learning how business really works from the inside. During the program, you'll get to roll up your sleeves and make an impact on day-to-day operations. Plus, you'll have tons of opportunities to network with passionate professionals across manufacturing, industrial engineering, and more-sparking new ideas through cross-department collaboration. It's all about expanding your skills, challenging yourself, and exploring where your ambitions can take you! What You'll Do: Support firmware development of complex embedded systems. Program embedded microprocessor-based control systems, program new applications and modify existing applications. Create detailed verification plans for software testing covering general product test and specific feature test. Compile and build user space applications on Linux. Debug firmware and hardware at component level & integrated system level to arrive at root cause under guidance of senior engineers. Ability to sort hardware from software failures. Generate detailed test reports comparing observed behavior against expected behavior that is derived from specifications. Experience with benchtop HW validation and test equipment (oscilloscopes, logic analyzers, power supplies & loads, DAQs, Network analyzers) and reading schematics and board layout files. Who You Are: Candidates must be a current senior pursuing a bachelor's in electrical engineering, electronics and communications, software engineering, computer science/engineering. Understand technical principles and concepts in electrical engineering. Knowledge of basic electronic circuits; familiarity with and ability to debug Digital and Analog Circuitry Design, A/D & D/A Converters, SPI Bus, and 12C Bus. Programming and debugging skills in C++ and embedded Linux Operating Systems. Communication interfaces experience such as RS-48, Modbus, CAN Bus, Ethernet/IP, Wi-Fi, and Bluetooth. Demonstrates a strong passion for engineering and a genuine desire to contribute meaningfully to team objectives. Committed to integrity, respect, and fostering a positive, inclusive work environment. Exhibits a strong sense of accountability, with the ability to take ownership of tasks and follow through on commitments. Must be authorized to work in the United States without current or future sponsorship requirements. Preferred Qualifications Pursuing a master's degree in electrical engineering, electronics and communications, software engineering, computer science/engineering. *Physical Demands While performing the duties, the employee will be working in an office environment with exposure to the plant floor as well as the Engineering Test Facility. The employee is required to sit, stand, walk, and use hands to handle objects and other tools Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus The Employee may be required to lift, push, and/or pull up to 25 pounds *As required by the Americans Disabilities Act (ADA) While performing the job duties, you will be working on-site at a manufacturing facility and will perform the majority of your duties in an office environment. You may, at times, be required to be present on the manufacturing floor and will be required to wear the appropriate personal protective equipment. You will be required to work in the office at the Blauvelt, NY location (Monday - Friday). Your scheduled work hours will be communicated to you by your manager. Pay Range: The expected salary range for this position is $22 -$26 per hour. Actual compensation will be dependent upon individual skills, experience, qualifications, and applicable law. What's In It for You People-First Culture - Enriching and caring for people is at the core of who we are; this includes executing our Diversity, Equity, and Inclusion (DEI) strategy, and providing you with meaningful career growth opportunities, a positive and safe work environment, and affirmation that you are heard, valued, and respected. Flexible PTO Policy - Work-life balance is important at Watts and our interns receive one (1) hour of flexible PTO for every thirty (30) hours worked. Your flexible PTO can be utilized for any type of absence. Paid Holidays - Celebrate the holidays with your loved ones and still get paid! You will receive the following paid holidays off during your time as an Intern with Watts. Where a holiday falls during the weekend, it will be observed on an adjacent weekday. Lunch and Learns - Throughout your internship, there will be opportunities for you to sign up to learn and network with some of the key strategic leaders and thought partners within our core operating model! Sustainability - For five years in a row, Watts has been named one of "America's Most Responsible Companies" by Newsweek. Join our journey as we continue to distinguish Watts as a responsible and committed corporate citizen. Working Conditions Work in both office and manufacturing environment. May occasionally be required to perform job responsibilities outside the typical office setting. While performing the responsibilities of this job, the employee is frequently required to walk, talk, and/or hear. The employee is occasionally required to stand, sit, and use hands to finger, handle, or feel. You must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include: close vision, color vision, peripheral vision, depth perception and ability to adjust focus. Nothing in this job description restricts Watts' right to assign or reassign duties, responsibilities, and working hours/conditions to this position at any time. This position is “at will,” which means that either the employee or Watts may terminate the employment relationship at any time, with or without notice, and for any lawful reason. Watts in it for you: Please note that the following benefits apply only to permanent roles and do not apply to internship roles. Competitive compensation based on your skills, qualifications and experience Comprehensive medical and dental coverage, retirement benefits Family building benefits, including paid maternity/paternity leave 10 paid holidays and Paid Time Off Continued professional development opportunities and educational reimbursement Additional perks such as fitness reimbursements and employee discount programs Learn more about our benefit offerings here: ********************************* How we work: At Watts, our culture is team-oriented and supportive. Employees here genuinely care about the quality of their work, and about each other. Our people are the heart of who we are and contribute to our longevity and continued success. And this is a place where you can have a big career. No matter your role, there are opportunities for learning and development, and your daily contributions make a meaningful impact on the lives of people who use our products and on the future of water. Watts is committed to equal employment opportunity. We follow a policy of administering all employment decisions and personnel actions without regard to race, color, religion, creed, sex, pregnancy, national origin, sexual orientation, age, physical or mental disability, genetic disposition or carrier status, marital status, military or veteran status, minorities, or any other category protected under applicable federal, state, or local law. Consistent with the obligations of state and federal law, Watts will make reasonable accommodations for qualified individuals with disabilities. Any employee who needs a reasonable accommodation should contact Human Resources.

Get your career started now with real work experience at C.T. Male Associates before you graduate. Our staff of professionals in Environmental Services will give you the tools and guidance to help you grow professionally in your field. Internships at C.T. Male are paid and increase potential for full-time employment opportunities with the firm upon graduation. Get hands-on experience working with our skilled Environmental Services team as an environmental biologist, engineer, geologist, or scientist. What You'll Do: Environmental Biologist: Your work would include participation in wetland delineation activities. $18.00 - $19.00/hour. Environmental Engineer: Your work would include industrial regulatory compliance associated with the Clean Air Act, solid and hazardous waste programs, and other related environmental permitting projects. $20.00 - $23.00/hour. Environmental Geologist: Your work would include participating in field sampling activities and working on geology projects. $18.00 - $19.00/hour. Environmental Scientist: Your work would include Phase I Environmental Site Assessments and other ‘due diligence' related tasks. $18.00 - $19.00/hour. Requirements Eligibility: Must hold and maintain a valid driver's license. Local and out of town travel may be required. Open to sophomores and above in an applicable program (environmental engineering, chemical engineering, environmental science, biology, geology, etc.), with juniors receiving priority consideration. Come join a company where your talents can grow, and your motivation is rewarded. EOE, including disability/vets.

Job DescriptionDescription: Advance Testing Company, Inc. is currently seeking a full-time Construction Materials Technician for an Internship/Co-Op to work on projects in the Northeastern United States. Advance Testing, an established New York-based construction materials testing and inspection firm, has opportunities available for individuals to perform testing and inspection of construction materials such as soils, aggregates, concrete, masonry and asphalt. Typical assignments include projects related to construction of roads, bridges, airports, tunnels, commercial and industrial buildings, schools, government and military sites, and material fabrication and production facilities. Successful candidates will be trained and certified to perform sampling and testing of soil, concrete, and asphalt materials on construction sites and in a laboratory setting through locally and nationally recognized programs. Once trained and certified, employees are considered full-fledged Construction Materials Technicians. Construction Materials Technician - RESPONSIBLITIES Observe work in progress to ensure that procedures and materials used conform to approved drawings and specifications. Perform standard testing of materials. Prepare samples of materials for laboratory testing. Examine workmanship of installations for conformity to specifications. Maintain daily log of construction and inspection activities and complete clear, accurate reports daily. Prepare sketches of construction installations that correlate with testing and inspection sites. Other related duties may be assigned. Construction Materials Technician - QUALIFICATIONS High school diploma or equivalent AS Degree in Civil Engineering Technology, Construction Management, Construction Technology, or similar, OR completed coursework toward a BS Degree in Civil Engineering or similar; Experience with construction materials testing and/or construction industry preferred (will be trained) Strong focus on safe work practices and adherence to all safety protocols Must be detail oriented and able to work independently Must be able to travel and to perform site visits Requires a valid, clean driver's license Applicants may be required to obtain any security clearances and background confirmation for sensitive projects and locations. Construction Materials Technician - COMPETITIVE SALARY AND BENEFITS PACKAGE In addition to providing competitive salaries, Advance Testing Company, Inc. offers a wide range of benefit options, including: Recently renovated company housing Overtime offered at time and a half Mileage reimbursement and per diem payments Opportunities for professional growth and advancement Paid sick days Paid training and certification Salary Range $18-20 per hour Requirements: All positions may require lifting and/or physical activities, including lifting of up to 75 lbs., walking/working on uneven surfaces, and driving to and from job sites. The majority of our work is conducted outdoors, in all weather conditions. Work hours vary, but include day, night and weekend shifts.

Job Title:Engineering Technician IV (SCA) Wage: $30.70 + $5.09 /Hr. H & W Contract: SUBMEPP This is a Service Contract Act position and is subject to the applicable wage determination as issued by the U.S. Department of Labor. Health & Welfare benefits are provided in accordance with the SCA. Job Description: Summary / Objective: This team provides support in the areas of Administration, Program Management, Engineering, and Logistics Programs associated with life cycle maintenance, modernization, and modification of Naval ships, unique platforms, new construction units and support facilities for Submarine Maintenance Engineering, Planning and Procurement (SUBMEPP), an independent field activity of the Naval Sea Systems (NAVSEA) Command that is aligned under Program Executive Office Attack Submarines (PEO SSN). SUBMEPP's mission is to keep assigned Naval ships and submersibles safe, reliable, and affordable through use of its engineered life cycle maintenance and modernization products and services. SUBMEPP performs technical duties and responsibilities to provide and maintain engineered life cycle maintenance products in direct support of the Fleet, shipyards, industrial facilities, and NAVSEA. General Duties or Experience: Be able to provide semi-professional technical support for engineers working in such areas as research, design, development, testing, or manufacturing process improvement. Required to have some practical knowledge of science or engineering. May require a practical knowledge of mathematics or computer science. This position will assist with the review of Technical Work Documents (TWDs) from current CNO Availabilities to determine whether the maintenance accomplished satisfies the requirements of SUBMEPP Maintenance Standards/Requirements identified in each Availability Work Package (AWP). Essential functions: Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions. Review Engineering and technical documentation to determine compliance with engineering standards, technical accuracy, and adequacy in relation to functional, operational, and technical requirements. Perform engineering analysis, reviews, studies and provide recommendations related to the development, interoperability, integration, operations, and use of Maintenance Standards during submarine system, subsystem, equipment maintenance. Review, analyze, maintain, draft, validate changes to technical submarine maintenance documentation. Perform Reliability Centered Maintenance (RCM) analysis on new and existing maintenance requirements. This ensures the systems maintain high safety, reliability, environmental compliance, and operational readiness at the most effective cost. Collaborate with the customer and various organizations, offering in-depth research and data analysis to improve engineering documentation and provide informed technical feedback. Provide administrative functions for program efforts in special situations including, but not limited to, meetings, and preparing/maintaining history files. Required Experience: Looking for people with experience in: Required years of professional experience as an Engineering Technician: Engineering Technician IV - >8 years experienced in the skills listed immediately below OR degreed engineer less than 4 years experience Familiarity with Navy supply systems, logistics databases, and Submarine Rotatable Pool processes. Reliability Centered Maintenance Experience or TGIs writing or reviewing experience. Retired SY workers Mechanical trades or engineering technician experience, degreed engineer, or retired SUBMEPP or SY (shop 38,31,260) Kittery ME, Work package development experience Experienced electrical trade or engineering technician prefer E, nuc ET nav ET, or RC Div, offer out Experienced quality assurance QAO/QAS/aQAO/aQAS with mechanical/electrical trade or technician background Required Education: High School Diploma or Accredited GED equivalent. Bachelor of Science (or higher) in Mechanical Engineering may be substituted for the relevant experience requirement. Preferred education and experience: Bachelor of Science (or higher) in Mechanical Engineering. Familiarity with Maintenance Standards and submarine Hull, Mechanical, and Electrical (HM&E) systems is a plus. Current or recent shipyard submarine availability maintenance experience and be familiar with availability work packages and tracking metrics. Experience as a PQS Worker, Work Center Supervisor, or 3M Coordinator within the Navy's maintenance system. Familiarity with the Navy's Planned Maintenance System. Familiarity with engineering documentation standards and quality assurance practices. Adept at learning new systems and terminology Competencies: Proficient in using Windows PC and the MS Office Suite. Knowledge of submarine equipment and systems (a plus). Strong analytical and problem-solving skills, with the ability to interpret technical documentation and data. Excellent verbal and written communication skills for effective collaboration with teams and reporting. Ability to work independently and manage multiple priorities in a dynamic, fast-paced environment. Comfortable learning and adapting to new technologies or systems quickly. Attention to detail and commitment to producing high-quality work. Work authorization/security clearance requirements: An active or current DoD Secret security clearance. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. ORBIS offers an excellent benefits package and a competitive salary in a professional atmosphere.

Job DescriptionDescription: Description: The Connecticut Institute for Refugees and Immigrants (CIRI) seeks a motivated intern to support its Rapid Rehousing Program under its Project Rescue department. Project Rescue provides comprehensive support services to victims of human trafficking and of other serious crimes. Survivors of human trafficking are eligible to receive benefits and victims who are not citizens or legal residents may qualify for immigration protection so that they and their families may remain in the U.S. and eventually apply for citizenship. As part of the Rapid Rehousing Program, CIRI engages in a unique collaboration with Connecticut Coalition Against Domestic Violence (CCADV) to serve individuals and families fleeing domestic violence and/or a victim of human trafficking. The primary role of the Rapid Rehousing case management work is to provide housing advocacy and case management services to adult survivors/victims of human trafficking throughout process of healing and gaining self-sufficiency. The intern would work closely with the Rapid Rehousing case manager to assist clients and support the program. Responsibilities include data entry, paperwork, and transferring case notes. Location: The internship takes place in person at CIRI's Bridgeport headquarters. Qualifications § Currently pursuing or recently completed a degree in Social Work, International Relations, Human Services, or a related field. § Strong communication and interpersonal skills. § Ability to work with diverse populations in a culturally sensitive manner. § Detail-oriented with good organizational skills. § Fluency in Spanish preferred. Duration and Schedule: This is an unpaid internship position requiring a commitment of 10-15 hours per week for a duration of 4 months or one semester. The schedule is flexible and can be tailored to accommodate the intern's academic requirements. Requirements:

MJ DALY, LLC is a well-established company that has set the standards for exceptional quality, on-time service, and wrapped itself in friendly customer service. MJ DALY has proven itself as a place to provide career opportunities for an individual to master their craft, earn competitive wages, and to make an impact in the lives of our employees, customers, and community. While working for us expect to work in an environment that is employee centric or in other words employee focused and most of all where your hard work is appreciated, recognized, and rewarded. The success of the company and your future is directly impacted by your daily contributions. If you are looking to be a part of something more than just a job - Make the move, apply today! MJ DALY, LLC has been waiting for you! We are seeking college students with an interest in construction management/project management to learn and grow professionally with the Arden Building Companies! This individual will work closely with project managers and estimators, gaining valuable experience with the construction process. The successful intern must be able to work collaboratively with internal project team, external stakeholders, and union tradespeople as part of their daily job responsibilities. We have openings in Pawtucket, RI; Woburn, MA; and Waterbury, CT. Essential Duties Include: * Processing documentation in Procore and Smart Sheets * Assembling submittals and RFI's * Assembling Operation and Maintenance Manuals * Performing Job-Site visits * Obtaining and processing of plans and spec for new bids * Inviting vendors/sub-contractors to view bid documents * Processing quotes and paperwork for bid * Creation and Maintenance of Project Schedules * Miscellaneous duties as required by Estimating & Construction departments. Qualifications: * Ability to work collaboratively with a team * Capable of maintaining deliverable dates * Strong attention to detail * Superior organizational skills * Strong interpersonal and verbal/written communication skills to effectively communicate with employees, customers, vendors and subcontractors * Desire to pursue a career in construction/project management Minimum Requirements: * Currently enrolled in a college degree program (engineering, construction management or related field) with minimum junior standing Additional Information: Arden Building Companies is the holding company for Arden Engineering Constructors, Corporate Mechanical of New England, Earthwise Energy Technologies, MJ Daly, and Unique Metal Works. Our comprehensive skill sets cover a wide range of services, including mechanical, electrical, and fire protection construction, service, maintenance, and building automation. With our extensive experience and talented teams, we provide the utmost level of quality and solutions for the demands of today's complex building systems. We are New England's premier mechanical contractor. Arden Building Companies, LLC is an equal opportunity employer and does not discriminate based on race, color, gender identity, sexual orientation, national origin, age, disability, genetic information, religion, martial or partnership status, parental status, military service, or any legally protected characteristics. All our employees share the responsibility for supporting our policies for a harassment-free and drug-free workplace. All offers of employment are contingent upon a criminal background check and a 5-panel drug screen satisfactory to Arden Building Companies, LLC.

**_About_** **_this_** **_Position_** At Henkel, you'll be part of an organization that's shaping the future through innovation, sustainability and collaboration. With our trusted brands like Persil , 'all , Dial , Snuggle , and Schwarzkopf and our cutting-edge technologies, you'll have countless opportunities to explore new paths and grow. This position is with our Consumer Brands business unit - where we empower our employees to bring the best Laundry & Home Care and Hair products to people around the world. **Dare to learn new skills, advance in your career and make an impact at Henkel.** **What you'll do** + Collaborate with cross-functional teams to support the development and launch of new packaging solutions + Test new packaging components to ensure compliance with performance and regulatory standards + Assist engineers with daily tasks related to packaging development and validation + Write and maintain packaging specifications and documentation + Support packaging-related project activities and timelines + Contribute to continuous improvement initiatives in packaging processes and systems **What makes you a good fit** + An undergraduate student (sophomore, junior, senior) pursuing a degree in Packaging Engineering. + Packaging Knowledge: Foundational understanding of packaging materials, formats, and processes. + Communication & Collaboration: Comfortable working across teams and effectively communicating with stakeholders at all levels. + Adaptability & Learning Agility: Eager to take on new challenges, quickly learn new systems, and apply knowledge to real-world projects. + Technical Skills: Proficient in Microsoft Office Suite (Excel, Word, PowerPoint); exposure to pallet design software such as CAPE or TOPS is a plus. **Some benefits of joining Henkel as an intern** + Exciting projects that allow you to make real impact and collaborate with Henkel colleagues worldwide. + Countless learning opportunities available through Henkel's online learning platform with over 9,000 professional courses. + Networking events with Henkel business leaders, experts and sustainability ambassadors. + Ongoing feedback discussions throughout the internship that allow you to accomplish concrete goals. + In-person and virtual social events to connect with other Henkel interns across the country. **Following your internship, you may be invited to join Henkel as a returning intern or full-time employee. ** **Additional information** + This internship is eligible for a housing stipend or relocation support. + The anticipated start date for this internship is June 15, 2026, and the anticipated end date is December 18, 2026. + Recruitment for our 2026 internships starts in late August 2025 and runs through early March 2026 or until all our positions are filled. + If selected to move forward in our recruitment process, you will receive an email from our talent acquisition team. + If a position you applied to is filled by another candidate, you will receive an email from our team alerting you that the position is closed. The salary for this role is $22-$27/hour. This is the range that we in good faith anticipate relying on when setting wages for this position. We may ultimately pay more or less than the posted range and this range. This salary range may also be modified in the future. Henkel is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information, and other legally protected categories. **JOB ID:** req75278 **Job Locations:** United States, CT, Darien, CT | United States, CT, Stamford, CT | United States, CT, Trumbull, CT **Contact information for application-related questions:** ***************************** Please do not use this email address for sending your application or CV. To apply, please click on the "Apply for this role" button below. Applications sent via e-mail will not be accepted. **Application Deadline:** As long as the vacancy is listed on our Career Site, we are happy to receive your application **Job-Center:** If you have an application already, you can create or log in to your accounthere (******************************************************************************************************************************************************** to check the status of your application. In case of new account creation, please use your email address that you applied with. Activate external content When clicking the button below external content will be loaded which involves transfer of personal data (e.g. IP address) to external servers. This may involve that cookies are set by the external content provider. Please see Data Protection Statement for further information. **Accept for all YouTube content** Deactivate loading external content from YouTube. How is work at Henkel

Introduction to the job ASML is seeking a summer intern in Materials Science, Chemistry, Physics, Mechanical Engineering, or a related field, to join the Defectivity Group in the Wilton, CT location. Within ASML, the Development & Engineering (D&E) sector is responsible for the specification and design of ASML products. The Defectivity group is responsible for creating the perfect environment within the vacuum reticle modules in cutting edge EUV lithography machines. We take many approaches, such as designing the gas flow in vacuum, choosing the correct materials and designing cleanliness processes. As ASML pushes the boundaries of nanotechnology beyond current state of the art, we need to study nanoparticle behavior in new ways. We are looking for someone to help pioneer knowledge in this developing area. The Defectivity Group in Wilton, CT is looking for an engineering intern in one of the following disciplines: Materials science / materials engineering / nanotechnology Tribology: wear resistance of coatings and materials Physics: plasma, electrostatics and materials compatibility Mechanical: Small particle behavior in gas flows and high vacuum Software: Data analysis and image processing for particle adder detection Electrical: Test equipment hardware and software, scripting in Python or Matlab Chemistry: chemical cleaning methods for vacuum grade cleaning, characterization of coatings, surface treatments Role and responsibilities As an intern in the Defectivity group you will participate in developing portions of the lithography system and/or associated tooling and test equipment. You will work on sub-systems involving robotics, mechatronics, precision mechanics, and/or opto-mechanics. You will need to consider engineering specifications and performance, lifetime, failure modes, root cause analysis, statistical analysis, measurement system capability, etc. You will collaborate with system architects and engineers in a multidiscipline project team to develop concepts, perform engineering analysis, build and test prototypes, design experiments, and/or analyze data. Design of experiments for a wide range of project needs. Derive conclusions from analysis to make practical recommendations. Technical writing and communication skills, including the ability to present results based on scientific evidence to audiences of a wide range of technical abilities Take direction from ASML System Architects and Senior Engineering mentors who are leading the development effort of critical large capital equipment. Education and experience At minimum, candidate for Bachelor's degree in a Science or Engineering discipline (such as Materials Science, Chemistry, Physics, Mechanical Engineering), with at least 2 years completed. Personal skills Team player willing to work with high level problem solvers on a daily basis. Genuine interest in materials science, engineering, and analysis, as well as in developing precision systems that can perform reliably at customer sites High energy, self-motivated, quick study, flexible nature. Customer-centric personal ethos. Ability to handle multiple projects and tasks concurrently and with minimal guidance. Other Information ASML Offers: A challenging opportunity to expand your knowledge in a wide variety of engineering application areas and to work on problems spanning all technical fields. Highly creative and qualified teams with a diversity of experience. Great career opportunities at a quickly growing high-tech company. World class technical problems to sol Additional Responsibilities: There is potential for exposure to strong magnetic fields, high voltage and currents. This position requires access to controlled technology, as defined in the United States Export Administration Regulations (15 C.F.R. § 730, et seq.). Qualified candidates must be legally authorized to access such controlled technology prior to beginning work. Business demands may require ASML to proceed with candidates who are immediately eligible to access controlled technology. Inclusion and diversity ASML is an Equal Opportunity Employer that values and respects the importance of a diverse and inclusive workforce. It is the policy of the company to recruit, hire, train and promote persons in all job titles without regard to race, color, religion, sex, age, national origin, veteran status, disability, sexual orientation, or gender identity. We recognize that inclusion and diversity is a driving force in the success of our company. Need to know more about applying for a job at ASML? Read our frequently asked questions. Request an Accommodation ASML provides reasonable accommodations to applicants for ASML employment and ASML employees with disabilities. An accommodation is a change in work rules, facilities, or conditions which enable an individual with a disability to apply for a job, perform the essential functions of a job, and/or enjoy equal access to the benefits and privileges of employment. If you are in need of an accommodation to complete an application, participate in an interview, or otherwise participate in the employee pre-selection process, please send an email to USHR_Accommodation@asml.com to initiate the company's reasonable accommodation process. Please note: This email address is solely intended to provide a method for applicants to initiate ASML's process to request accommodation(s). Any recruitment questions should be directed to the designated Talent Acquisition member for the position.

Manufacturing Engineer Internship Summer 2026 Responsibilities Perform engineering analysis and apply problem-solving methods to support new product development and/or sustaining production of existing designs Assist manufacturing with tooling organization system Troubleshoot processes and tooling to resolve manufacturing issues Create designs and drawings based on engineering specifications or descriptions of customer requirements Preferred Qualifications Pursuing a Bachelor's degree in Engineering curriculum Familiarity with machining and manufacturing methods and processes Mechanical design experience Mechanical aptitude displayed through work experience or personal hobbies/projects Experience with group work environments Must be a US Citizen

Introduction to the job ASML US, including its affiliates and subsidiaries, bring together the most creative minds in science and technology to develop lithography machines that are key to producing faster, cheaper, more energy-efficient microchips. We design, develop, integrate, market and service these advanced machines, which enable our customers - the world's leading chipmakers - to reduce the size and increase the functionality of their microchips, which in turn leads to smaller, more powerful consumer electronics. Our headquarters are in Veldhoven, Netherlands and we have 18 office locations around the United States including main offices in Chandler, Arizona, San Jose and San Diego, California, Wilton, Connecticut, and Hillsboro, Oregon. Roles and Responsibilities The DUV Reticle Stage Mechatronics Group in Wilton CT is seeking a well-rounded intern to work on mechatronics, sub-nanometer linear motion control, product and system integration and/or software functionality, all specific to ASML products. The main focus will be mechatronics and control systems on advanced modules in lithography tools. The job requires a strong technical individual contributor to: Technically own and drive the decisions necessary to complete the tasks. Work with designers from supporting engineering disciplines in order to converge on an overall design solution. Autonomously gather necessary information to conceive and propose options in order to meet the sub-module and sub-system level requirements. Interface with module architects to derive requirements for the sub-module. Write performance specification documents at sub-module level and feed sub-budgets down to the lower levels. Create sub-module level test protocol docs and subsequent test result analysis to prove sub-module and sub-system level performance specs are met. Understand and be able to communicate the implication of sub-module level errors on higher module level performance and on other sub-module. Work on solving an actual issue or design challenge the group is facing at the time. Specific tasks will also be tailored to match the education / experience level of the intern as well as the student's learning objectives for the duration. Perform some autonomous work (modeling, data collection, data analysis, test execution in the lab or clean room) as well as some supervised and/or collaborative work. Clearly communicate technical performance in both written and verbal presentations to stakeholders. Education and experience Pursuing Bachelor's degree in a Science or Engineering discipline (such as Mechanical Engineering, Mechatronics, Electrical Engineering, or Physics), with at least 2 years completed. Pursuing Master's degree preferred Strong MATLAB, Simulink skills are required Direct experience in the design and test of mechatronic systems and control systems. Skills Candidate must have strong communicative skills with a commitment to achieving results on time. Candidate shall be a demonstrated “team player” with a quality orientation and interpersonal skills. Experience with PID controllers, linear and nonlinear calibrations, flexible dynamics. Ability to interface with multidisciplinary groups and work effectively in a team. Willingness to take on responsibility, follow through and keep multiple simultaneous assignments on schedule. Ability to quickly acquire technical knowledge from documentation and on-the-job training. Capability to thoroughly investigate technical issues (analytically and hands-on in a lab environment). Additional Responsibilities: There is potential for exposure to strong magnetic fields, high voltage and currents. This position requires access to controlled technology, as defined in the United States Export Administration Regulations (15 C.F.R. § 730, et seq.). Qualified candidates must be legally authorized to access such controlled technology prior to beginning work. Business demands may require ASML to proceed with candidates who are immediately eligible to access controlled technology. Inclusion and diversity ASML is an Equal Opportunity Employer that values and respects the importance of a diverse and inclusive workforce. It is the policy of the company to recruit, hire, train and promote persons in all job titles without regard to race, color, religion, sex, age, national origin, veteran status, disability, sexual orientation, or gender identity. We recognize that inclusion and diversity is a driving force in the success of our company. Need to know more about applying for a job at ASML? Read our frequently asked questions. Request an Accommodation ASML provides reasonable accommodations to applicants for ASML employment and ASML employees with disabilities. An accommodation is a change in work rules, facilities, or conditions which enable an individual with a disability to apply for a job, perform the essential functions of a job, and/or enjoy equal access to the benefits and privileges of employment. If you are in need of an accommodation to complete an application, participate in an interview, or otherwise participate in the employee pre-selection process, please send an email to USHR_Accommodation@asml.com to initiate the company's reasonable accommodation process. Please note: This email address is solely intended to provide a method for applicants to initiate ASML's process to request accommodation(s). Any recruitment questions should be directed to the designated Talent Acquisition member for the position.

**_About_** **_this_** **_Position_** At Henkel, you'll be part of an organization that's shaping the future through innovation, sustainability and collaboration. With our trusted brands like Persil , 'all , Dial , Snuggle , and Schwarzkopf and our cutting-edge technologies, you'll have countless opportunities to explore new paths and grow. This position is with our Consumer Brands business unit - where we empower our employees to bring the best Laundry & Home Care and Hair products to people around the world. **Dare to learn new skills, advance in your career and make an impact at Henkel.** **What you'll do** + Collaborate with cross-functional teams to support the development and launch of new packaging solutions + Test new packaging components to ensure compliance with performance and regulatory standards + Assist engineers with daily tasks related to packaging development and validation + Write and maintain packaging specifications and documentation + Support packaging-related project activities and timelines + Contribute to continuous improvement initiatives in packaging processes and systems **What makes you a good fit** + An undergraduate student (sophomore, junior, senior) pursuing a degree in Packaging Engineering. + Packaging Knowledge: Foundational understanding of packaging materials, formats, and processes. + Communication & Collaboration: Comfortable working across teams and effectively communicating with stakeholders at all levels. + Adaptability & Learning Agility: Eager to take on new challenges, quickly learn new systems, and apply knowledge to real-world projects. + Technical Skills: Proficient in Microsoft Office Suite (Excel, Word, PowerPoint); exposure to pallet design software such as CAPE or TOPS is a plus. **Some benefits of joining Henkel as an intern** + Exciting projects that allow you to make real impact and collaborate with Henkel colleagues worldwide. + Countless learning opportunities available through Henkel's online learning platform with over 9,000 professional courses. + Networking events with Henkel business leaders, experts and sustainability ambassadors. + Ongoing feedback discussions throughout the internship that allow you to accomplish concrete goals. + In-person and virtual social events to connect with other Henkel interns across the country. **Following your internship, you may be invited to join Henkel as a returning intern or full-time employee. ** **Additional information** + This internship is eligible for a housing stipend or relocation support. + The anticipated start date for this internship is June 15, 2026, and the anticipated end date is December 18, 2026. + Recruitment for our 2026 internships starts in late August 2025 and runs through early March 2026 or until all our positions are filled. + If selected to move forward in our recruitment process, you will receive an email from our talent acquisition team. + If a position you applied to is filled by another candidate, you will receive an email from our team alerting you that the position is closed. The salary for this role is $22-$27/hour. This is the range that we in good faith anticipate relying on when setting wages for this position. We may ultimately pay more or less than the posted range and this range. This salary range may also be modified in the future. Henkel is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information, and other legally protected categories. **JOB ID:** req75278 **Job Locations:** United States, CT, Darien, CT | United States, CT, Stamford, CT | United States, CT, Trumbull, CT **Contact information for application-related questions:** ***************************** Please do not use this email address for sending your application or CV. To apply, please click on the "Apply for this role" button below. Applications sent via e-mail will not be accepted. **Application Deadline:** As long as the vacancy is listed on our Career Site, we are happy to receive your application **Job-Center:** If you have an application already, you can create or log in to your accounthere (******************************************************************************************************************************************************** to check the status of your application. In case of new account creation, please use your email address that you applied with. Activate external content When clicking the button below external content will be loaded which involves transfer of personal data (e.g. IP address) to external servers. This may involve that cookies are set by the external content provider. Please see Data Protection Statement for further information. **Accept for all YouTube content** Deactivate loading external content from YouTube. How is work at Henkel