Helper jobs in Graham, NC - 252 jobs

Our client is a trusted and growing concrete-cutting and selective-demolition contractor serving commercial and industrial clients throughout the Raleigh-Durham region and surrounding areas. Known for their commitment to safety, integrity, and quality workmanship, they offer a wide range of services including flat sawing, wall and wire sawing, core drilling, hand-sawing, selective demolition, and concrete removal and repair. As their team continues to grow, our client is seeking a hardworking and dependable Construction Helper to support Operators in performing concrete sawing, drilling, cutting, and selective demolition services. This position is physically demanding and requires a strong work ethic, a focus on safety, and a willingness to learn. Helpers assist with transporting equipment, preparing jobsites, handling materials, maintaining tools. Essential Functions Jobsite Support Assist Operators in setting up and transporting equipment to/from jobsites. Assist in preparing jobsites by unloading tools, staging equipment. Assist in handling debris, slurry, and material removal from work areas. Equipment and Vehicle Care Transport equipment daily between the yard and job sites. Assist in cleaning tools, equipment, and vehicles daily to ensure readiness for the next job. Assist Operators in basic preventive maintenance tasks and inspections. Report equipment issues promptly to Operators or the shop mechanic by using Tyfoom forms Manage personal expendables usage Safety & Compliance Comply with company safety procedures and OSHA regulations diligently. Wear required PPE consistently Assist in setting up barricades, signage, and other safety controls on jobsites. Participate in Job Hazard Analysis with operator on each job after work is reviewed with site contact. Review safety plan with operator to assess need for respirator use when performing tasks that require respirator use Assess safety risks with operator associated with working in extreme environments (take breaks in heat) Use tools and equipment when possible, to minimize physical exertion and risk of injury Report near misses Operate vehicles and equipment in a safe and professional manner at all times Learn safe use of equipment with body positioning, keeping guarding on tools, using mounted drills when necessary, etc. Administration & Communication Support Operators in completing job-related paperwork Turn receipts in in a timely manner Communicate respectfully with team members, clients, and supervisors. Report progress, challenges, and delays to the Operator or Field Manager. Professional Development Participate in on-the-job training to learn tool operation and industry practices. Develop proficiency in basic concrete sawing, drilling, and demolition tasks. Show initiative and readiness to advance toward Operator role within 1-2 years Qualifications High school diploma or equivalent preferred. Previous construction or labor experience helpful but not required. Strong physical stamina. Willing to work in weather conditions that may be adverse (hot/cold/rain) Good driving record with current license Strong mechanical abilities Safety Oriented Self-motivated Problem solving ability Time management skills Willing to work hard Dependable & reliable Work as a team Career Oriented Willing to learn Mathematical aptitude (willing to train measurements & calculations) Normal periods of sitting and standing in an office environment. Lifting and/or pushing objects up to 25 lbs. on a regular basis

Responsibilities: Assemble and install metal insulated panels and ductwork according to project requirements Bend and wrap metal flashing around columns Install corrugated metal roof decking Interpret and understand technical blueprints, drawings, and specifications Use blueprints as a guide for component fabrication and assembly Communicate any discrepancies or issues with blueprints to the team lead Ensure precise measurements and alignment of metal siding, ducts, and roofing Collaborate with team members to create visually appealing and functional wall structures Qualifications: Proven experience in thin gauge metal work, blueprint reading, and working in a manufacturing or construction environment Proficiency in using various hand tools and power tools Strong attention to detail and a commitment to producing high-quality work Ability to work effectively in a team and follow safety protocols Knowledge of safety regulations and procedures related to the manufacturing and construction industry Excellent problem-solving skills and the ability to adapt to changing project requirements Education Requirements: High school diploma or equivalent; technical or trade school certification is a plus Job Requirements/Special Skills: Ability to lift and carry up to 50 lbs Ability to step over and work on top of fixtures that are 28 inches off the floor when necessary Ability to work in conditions of varying heat and cold and where noise levels are at or above 90 decibels

Founded in 1956, the Jacuzzi Brand has grown to become the modern-day Jacuzzi Group, the premier manufacturer of functional products for the home and outdoor space found in more than 60 countries. Jacuzzi Bath Remodel is the fastest growing business unit of Jacuzzi Group with 9 successful locations launched nationwide in under 2 years. Our BRAND NEW Raleigh, North Carolina location makes 10 total locations Nationwide. Jacuzzi Bath Remodel combines our premium materials, knowledgeable sales team, experienced in-house certified installers and over 60 years of proven excellence to deliver the highest standard of customer satisfaction. Jacuzzi Bath Remodel is hiring Construction - Apprentice Installers. If you are looking for a career in Construction or Installation, please apply now! What we offer our Construction - Apprentice Installers: We provide trucks and tools! 40-hour work week with plenty of overtime (paid at 1.5x). Typical schedule is Monday- Friday + overtime. Hourly pay rate of $19.00/hr. A clear path to advancement and career development, become a Lead Installer in under a year! Requirements of a Construction - Apprentice Installer: 1+ years of experience in general construction. Basic knowledge of tools and construction practices. Some experience with carpentry, demolition, framing, drywall installation or repair, tile work, remodeling, or plumbing. Must be proficient with using a tape measure. Comfortable lifting 50+ lbs. consistently. Ability to interact professionally with customers. For insurance purposes Apprentice Installers must be able to pass a DMV check. What we are looking for in our next Construction - Apprentice Installer: Punctual Hard worker Willingness to learn and grow within the company. Desire to be with a great company long term. Providing a great customer experience Benefits We provide the truck and the tools! 40 hour work week with plenty of overtime (paid at 1.5x). Typical schedule is Monday- Friday + overtime Hourly pay rate is $19/hr. Benefits: 12 days of paid vacation; Medical/Vision/Dental Insurance, paid holidays; 401K. Apply today and start next week!

As of 10.8.2020 Job Summary: The position of the Installation Helper is responsible for assisting the Installer in performing customer installations according to agreed-upon project timeline and costs. Essential Functions: Assist Installer with performing customer installations according to plan: Read and interpret blueprints and art work Operate a boom truck, workout of baskets, lifts, scaffolding Climb ladders and perform work while on ladders Use and operate a wide variety of power tools, ranging from drills to jackhammers Perform electrode/arch welding Maintain awareness for installation issues and report to immediate supervisor Check product for completion and proper loading prior to leaving facility Perform quality checks to avoid rework on installations Assist Installer with completing required documentation for each job site Complete Bill of Lading (BOL) before leaving facility Document job status by taking photographs and completing written documentation Abide by employment policies as established by principles Participate in safety training and inspections Perform routine checks and maintenance on all company vehicles, equipment and tools Learn OSHA and state DOT requirements Attend safety meetings and training Maintain awareness of safety risks and bring to manager's attention Abide by all safety regulations when in Allen facilities and when working at customer site General Expectations Make travel arrangements as necessary Submit expenses at least weekly Schedule maintenance/repairs to company vehicle Attend meetings and conference calls as required MUST possess a valid United States Passport 5. Follow the rules and regulations related to the safety of all employees working for the Company Adherence to all mandated safety procedures including: driving policy, production area safety requirements and fire safety Safety requires all employees to review materials provided by the Company related to any updates on safety procedures Informs management of any safety related issues 6. Ensures safety of self and others through proper use and care of equipment/work area Handles and operates all equipment in a careful and safe manner Maintains tools and equipment in good working order and stores them properly Keeps all work areas neat and clear of potential hazards Perform other duties as assigned Competencies: Ability to prioritize tasks and handle numerous issues simultaneously Organized, detail and results oriented Strong analytical and problem-solving skills with the ability to exercise sound judgment and make good decisions based on the best interests of the company Strong sense of urgency to complete tasks in a timely manner Ability to work independently, with minimal supervision Mechanical capabilities Basic mathematical skills to include but not limited to adding, subtracting, multiplication, division, and percentages Ability to read a tape measure Ability to work in a fast-paced, high-volume environment Ability to read blue prints and interpret sign/shop drawings and specifications Thoroughness/detailed Time management Apply personal safety measures including utilizing the correct PPE Ability to use electric hand tools including a paint gun and sander Ability to mix paint and learn new paint systems Ability to take measurement of a job (ex: using a tape measure, steel rule, tri square) Problem solving Time management Ability to climb ladders Ability to work with fractions including adding and subtracting Ability to convert inches to feet General electrical experience Work Environment: While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The noise level in the work environment can be loud. The employee is exposed to a variety of extreme conditions at job sites. This position is performed in outside weather conditions. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential function of this job. While performing the duties of this job, the employee is often required to perform the following activities: Standing. Walking. Moving about on foot to accomplish tasks, particularly for long distances or moving from one work site to another. Sitting. Ability to sit at a desk for long periods of time. Fingering. Picking, pinching, typing or otherwise working, primarily with fingers. Grasping. Applying pressure to an object with the fingers and palm. Talking. Expressing or exchanging ideas by means of the spoken word. Hearing. Perceiving the nature of sounds at normal speaking levels with or without correction. Ability to receive detailed information through oral communication, and to make the discriminations in sound. Light work. Exerting up to 10 pounds of force occasionally, and/or up to 5 pounds of force frequently, and/or negligible amount of force constantly to move objects. Visual Acuity. To perform close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; and visual inspection. Reaching: Extending hands and arms in all direction Forward bending, squatting, overhead reaching, kneeling/crawling, and climbing Continuous standing Lifting: Up to 70 lbs and team lifting up to 100 lbs Carry and use 5 lb to 10 lb power tools or paint containers very frequently Pushing and pulling Moderate level of hand to eye coordination and dexterity including picking, pinching, holding, grasping and repetitive flexion/rotation Position Type/Expected Hours of Work: This is a full-time, 40 hour a week position with overtime as required. Travel: Up to 75% travel is required for this position including extended stays and possible weekends. Educational Requirements: Highschool diploma or GED. Preferred Educational Requirements: Technical school training or certification. Knowledge Requirements: Current driver's license and clean driving record; CDL preferred Sign industry experience Construction industry experience Advanced computer proficiency General construction methods Hand tools OSHA general industry standards Computer proficiency including Microsoft Office Suite (Outlook, Word and Excel) Electrode/arc welding General Disclaimer: The duties listed above are intended only as illustrations of the various types of work that may be performed. Other duties may be assigned as needed by the Company. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The job description does not constitute an employment agreement between the employer and employee and is subject to change by the employer as the needs of the employer and requirements of the job change. Allen Industries is an Equal Employment Opportunity, Affirmative Action Employer. We consider applicants for all positions without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, marital, disability or veteran status.

Job Description KC's Improvement Construction Co., Inc. is a licensed, fully insured Design Build firm that has served the Triad area for more than 40 years. Our goal is to bring the highest quality of service, professionalism, and craftsmanship to any construction project, no matter how great or small. We are looking to hire a Carpenter Helper/Laborer. We offer opportunities for motivated individuals to advance within our organization. As you gain experience and demonstrate your dedication, you'll have the chance to take on more responsibilities and grow your career in the construction industry. Benefits Include: 8 Paid Holidays per Year PTO Sick Time Health Insurance Reimbursement Company-provided cell phone (for business purposes) Compensation: $15-$17 per hour to start KC's Improvement is an equal opportunity employer, fostering a diverse and inclusive work environment. If you are ready to take on a rewarding role and make a difference in the industry, we invite you to apply. Compensation: $15 - $17 hourly Responsibilities: Assist skilled carpenters in daily tasks, ensuring projects run smoothly and efficiently. Prepare and maintain work areas, ensuring a clean and safe environment for all team members. Handle tools and materials with care, contributing to the quality and precision of our construction projects. Support the team in measuring, cutting, and assembling wood and other materials as directed. Communicate effectively with team members to ensure clarity and understanding of project goals. Follow safety protocols diligently, prioritizing the well-being of yourself and your colleagues. Help in the installation of structures and fixtures, such as windows, frames, and moldings, under supervision of experienced carpenters. Facilitate material deliveries and job site clean-up Qualifications: Experience in basic residential carpentry, including framing, window and door installation, and interior trim work. Ability to read and interpret construction plans and specifications accurately. Proven track record of maintaining a clean and organized job site. Familiarity with carpentry tools and equipment, with a willingness to learn new tools as needed. Ability to measure and cut wood precisely, following instructions from the Lead Carpenter or Carpenter. Strong organizational skills to facilitate material pick-up and minimize project delays. Commitment to following safety and incident reporting procedures in line with Federal and State regulations. About Company Mission To deliver high-quality, design-build renovation solutions that enhance the way clients live and work through expert planning, skilled craftsmanship, and a commitment to clear communication from concept to completion. Vision To be the Triad's most trusted name in residential and commercial renovations, known for our integrity, reliability, and ability to turn bold ideas into lasting results. Core Values Integrity First We do what we say we'll do-on time, on budget, and with full transparency. Craftsmanship Matters We take pride in our work and stand behind the quality of every project. Client-Centered Approach We listen first, design smart, and build with your goals in mind. Team Commitment We believe in showing up, stepping up, and working together to get the job done right. Continuous Improvement From processes to people, we're always striving to be better than yesterday.

Job Description For more information or to apply, please visit or call the branch nearest you: HireQuest Direct 606 W South ST Raleigh, NC 27603 Phone: ************ General Laborer: Entry level work to perform a variety of manual labor tasks usually within an industrial or a construction environment. Skilled Laborer: Experience required for specific job requirements. These positions include a variety of specific types of carpenters, electricians, heavy equipment operators, painters, and plumbers. We have jobs available across the country, please call your local branch to learn more.

We are looking for an Industrial Pipe Fitter that will assemble, layout, install and maintain pipe systems. Please note this is a full time position with full benefits and not a contract or short-term assignment. • Read blueprints and specification to determine the scope of work: locations, quantities, and material specs. • Selects type and size of pipe, and related materials and equipment according to specifications • Cuts, threads, bends and assembles the pipes. • Prepare, cut, fabricate, layout, fit, position, and assemble piping components together in various positions. • Bolt, clamp, and tack-welds parts to secure in position for welding. • Install hangers, supports, valves and components according to piping system plans and specifications. • Perform leak tests to ensure the quality of the pipe and the piping systems. • Proper identification and use of tools required for tasks. (grinders, drills, beveling machine, etc.) • Operate forklifts & overhead cranes. • Hoist loads using slings, chains, shackles, hooks, cables, and other rigging equipment. • Maintain safe and clean work environment. Qualifications • Demonstrated industrial construction/maintenance experience. • Must be proficient installing copper. • Ability to read prints and construction drawings. • Must understand how to read and interpret ISO's, blueprints, technical manuals and instructions to determine work procedures • Must have 4+ years' experience with pipe fitting processes. • Ability to take detailed instruction. • Positive “can do” attitude, strong work ethic and a team player. • Good problem-solving abilities, communication skills, aptitude and manual dexterity. • Ability to work with minimum supervision. • Must be able to read & understand weld symbols, weld procedures, mechanical and structural drawings. • Ability to use Oxy/fuel & Plasma hand cutting torch. • Daily housekeeping of shop and/or work area. • Flexible working schedule to support project needs. • Knowledge of OSHA guidelines and safe work practices. Considered a Plus • Pipe fitting experience with ASME B31.3, B31.4 and API 1104 codes. • Welding and/or tacking experience using GTAW process. • Fit-up & layout experience on structural/misc. steel. • Familiarity with weld inspections, inspection documentation. • NCCER Certification as an Industrial Pipe Fitter. • Formal/technical education. What We Offer Supportive work environment Opportunity to learn additional skills as well as upward mobility Start earning two weeks of PTO first year Eight paid holidays Company paid life insurance, short and long term disability Must have reliable transportation. Pre-employment drug test required. Relocation is not available. Due to most jobs being local per diem is also not available. AC Corporation is an Equal Opportunity/Affirmative Action employer and will consider all qualified applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Job Description WxTite is seeking highly motivated individuals who are interested in establishing a long-term career with a growing company and are ready to work in a fast-paced environment. We understand the value of our employees and offer competitive compensation packages, 401K plans and comprehensive benefits. At WxTite, you'll find room for advancement, and managers who appreciate your work efforts and reward you for your performance. As a Service Helper you will be: Load, unload, and organize tools, equipment, and materials at job sites Prepare work areas by setting up ladders, safety equipment, and material staging areas Help with cleanup and proper disposal of materials after job completion Learn and assist with basic roofing repair techniques and material applications Assist with basic measurements and material calculations Always follow all safety protocols and procedures Communicate with clients and job site personnel about project needs and status updates Serve as a liaison between Service Manager and field teams Our ideal candidate will: High school diploma or GED Valid driver's license with acceptable driving record 3 years of driving experience Previous experience in construction, roofing or related field preferred but not required Familiarity with common hand and power tools preferred Bi-lingual (English-Spanish) preferred but not required Ability to lift and carry up to 50 pounds

Job Title: Electrician's Helper Reports to: Operations Manager. Will frequently receive daily direction from a Foreman or Mechanic on the job site under authority of the Operations Manager. FLSA Status: Non-exempt SUMMARY The Electrician's Helper is responsible for assisting Foremen and Mechanics in the execution of electrical installations. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Coordinates and gathers tools and supplies Assists in the installation of materials to project scope, NEC and company guidelines and quality standards Keeps worksite clean and free of debris Follows all safety rules and alerts a Mechanic or Foreman if safety hazards are identified · Accurately records time in the company's time tracking system QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. At least 90 days· experience as a Green Helper or previous Electrician's Helper Experience Must pass the Electrician's Helper Quiz Must be recommended by a Foreman Ability to operate smartphone technology Ability to count Ability to follow verbal and written instructions in English Ability to safely operate a variety electric, battery-operated and manual hand tools Ability to drive a motor vehicle PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to stand for long periods, walk, squat, kneel, and climb a ladder Ability to grasp, hold and twist and manipulate objects with their hands (manual dexterity) Ability to see details at close range and distinguish colors and shades Ability to hear verbal instructions and safety warnings Ability to lift up to 40 pounds WORK ENVIRONMENT Construction sites can be loud (hearing protection is sometimes required) Construction sites can be hot or cold, depending on the time of year and the stage of construction Construction sites have slip and trip hazards, fall hazards, hazards from falling debris and other safety hazards. PPE such as hard hats, safety glasses and work boots are typically required. WORK HOURS The work hours for this position are typically 7:00 a.m. to 3:30 p.m. with a 30-minute lunch break, but may vary based on client need and project schedule. Any changes in schedule will be announced by a Foreman overtime and weekend work may be during busy periods. DRESS CODE Shirts must have a minimum of 6" sleeves and must be of full length. Long pants are required except in rare cases where shorts are approved. Pants must be appropriate for a construction site, be clean and neat with no holes. sweat pants are not allowed. Undergarments should not be seen. Work boots are required. Safety shoes are recommended and may be required on some jobs. Tennis shoes, sneakers, soft-soled or worn-out shoes are not allowed. Apparel may not contain offensive language or images.

Discover your exciting role The primary responsibilities of this position include preparing products for welding and finishing products after welding in a manner that ensures the proper and safe production of our high quality line of PSP products. Explore your tasks and responsibilities * Set up the work area, keep the area tidy, and meet the daily production and quality demands of the Weld Shop. * Prepare products to be welded through various support related tasks including preparing equipment, preparing products for purge welding and lifting, and holding and positioning parts. * Perform some light welding tasks with the GTAW process. * Comply with health, safety, (including OSHA), and environmental procedures, and ensure the cleanliness of the area. * Comply with established production philosophies designed to increase production, safety and/or quality, e.g., Lean Manufacturing, 5s and TWI methodologies. * Continue to learn and expand one's capacity within this job by increasing knowledge and skill base * Perform various other assignments per the Department Lead's direction. Show your expertise Minimum Education, Certifications, and Qualifications * High school diploma or GED require * Preferably a minimum 1 year of experience performing GTAW or GMAW welding Personal Attributes * Independent * Dependable; determined, positive in demeanor * Attention to detail * Team player * Good attitude Physical Demands * Frequent standing, bending, sitting, and use of hands is required * Specific vision abilities required to include close vision, and ability to adjust focus * Occasionally perform physical activities including lifting (up to 50 lbs. unassisted) Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the production area is usually moderately loud. The Weld Department is a sectioned off area of the production floor. Various grinding, cutting and welding tasks are performed within the Weld Department. * Safety glasses and hearing protection are required when in the production area * PPE covering eyes and skin is required when welding or heat induced cutting * PPE covering hands and face is required when grinding * PPE specific to tasks being performed is required Non-Solicitation We are not currently accepting third-party agency candidates for this position. Any agency candidate submitted to any employee of Exyte or TFS may be contacted by Exyte or TFS without obligation to the third-party agency. Employment Sponsorship Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor employment visas at this time. EEO Statement Exyte US, Inc. and its subsidiaries are proud to be an Equal Employment Opportunity employer that is committed to supporting an inclusive workplace where associates excel based on personal merit, qualifications, experience, ability, and job performance. We prohibit discrimination and harassment of any kind based on race, color, religion, age, sex (e.g., pregnancy, childbirth and related medical conditions, sexual orientation, gender identity), national origin, disability, genetic information, protected veteran status, or any other protected characteristic as outlined by applicable federal, state, or local laws. Contact: You want to be part of the Exyte team? We look forward to receiving your application! For further questions and information, please do not hesitate to contact Clinton Crellin via E-Mail at ************************* Please note that we only consider applications submitted through our application portal. Applications sent via email will not be considered due to data protection regulations.

Electrician Helper Start an exciting and rewarding career today by joining Starr Electric Company's Electrical Apprenticeship Program! Advance from entry level Helper to highly trained Journeyman Electrician, while earning Top Pay! Job Responsibilities: Assist electricians in the installation, repair, replacement and maintenance of electrical systems, appliances and equipment. by performing tasks under the direct supervision of an electrician, Foreman, Leadman or Superintendent. Duties include (but not limited to): * Material handling * Tool maintenance and upkeep * Wire pulling * Conduit installation * Hand digging and trenching Job Requirements * Transportation to/from job sites * Hand Tools (as described in hire packet) * Able to positively identify colors of wires. * Practices and comprehends safe work procedures per company policy. Experience / Prerequisites * 0-2 years of previous electrical experience Starr Electric is an Equal Employment Opportunity Employer. We are committed to working towards and maintaining a diverse workforce by providing equal employment opportunities to all individuals without regard to race, color, gender, religion, sexual orientation, gender identity, national origin, disability, veteran status, age, genetic information, or any other protected group status defined by law. Department: Electrician-Commercial This is a full time position

We're not your typical plumbing company. At Streamline Services, we're a tight-knit team driven by our shared core values and a genuine love for what we do. If you're a plumber looking for a place where your hard work is appreciated, your manager invests in you, and your birthday is a paid holiday, then you've found your home! What You'll Be Doing: This role is all about expertise and people skills. We need a professional who can diagnose plumbing problems, perform flawless repairs, and, most importantly, build lasting relationships with our customers. Be the Expert Guide: Inspect, diagnose, repair, and replace. You'll translate complex issues into clear options, guiding customers to confident decisions. Master the Flow: Efficiently manage your work, maintain accurate records, and keep in close communication with our dispatch team. Keep It Polished: Ensure your company vehicle is clean and stocked-it's your office on wheels! Embrace the Culture: Commit to being Dependable, Positive, and Eager to Learn, Humble, Process Drive and Dedicated-these aren't just words; they're how we operate every day, Requirements You're a Great Fit If: You have 1-3 years of residential plumbing experience. You're an exceptional communicator with top-notch customer service skills. You can lift up to 50 lbs and handle the physical demands of the job (confined spaces, various environments). You have a clean driving record and are ready to jump into our systems (Service Titan experience is a plus!). Your Unbeatable Benefits Package:We're serious about taking care of our team. Check out what you get: Competitive Base Pay paired with Performance Bonuses that offer unlimited earning potential. 401k with a 3% Company Match. $100% Employer-Paid Medical and Dental Insurance. 2 Weeks PTO and 6 Holidays. Special Paid PTO Day for your Birthday and a loved one's birthday! Fully Stocked, Take-Home Company Truck. Company Phone and Tablet 8 paid uniforms Tool Purchase Program. Bi-Weekly Paid Training and dedicated 1:1 time with your Manager. A supportive team that celebrates success and gives back to the community! Stop dreaming about a better job. Start building a better career. Apply Today! Equal Employment Opportunity Statement: Streamline Services is an equal-opportunity employer. We are committed to creating a diverse and inclusive work environment and are proud to be an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. Salary Description 70,000-110,000

Job DescriptionOur client is a trusted and growing concrete-cutting and selective-demolition contractor serving commercial and industrial clients throughout the Raleigh-Durham region and surrounding areas. Known for their commitment to safety, integrity, and quality workmanship, they offer a wide range of services including flat sawing, wall and wire sawing, core drilling, hand-sawing, selective demolition, and concrete removal and repair. As their team continues to grow, our client is seeking a hardworking and dependable Construction Helper to support Operators in performing concrete sawing, drilling, cutting, and selective demolition services. This position is physically demanding and requires a strong work ethic, a focus on safety, and a willingness to learn. Helpers assist with transporting equipment, preparing jobsites, handling materials, maintaining tools. Essential Functions Jobsite Support Assist Operators in setting up and transporting equipment to/from jobsites. Assist in preparing jobsites by unloading tools, staging equipment. Assist in handling debris, slurry, and material removal from work areas. Equipment and Vehicle Care Transport equipment daily between the yard and job sites. Assist in cleaning tools, equipment, and vehicles daily to ensure readiness for the next job. Assist Operators in basic preventive maintenance tasks and inspections. Report equipment issues promptly to Operators or the shop mechanic by using Tyfoom forms Manage personal expendables usage Safety & Compliance Comply with company safety procedures and OSHA regulations diligently. Wear required PPE consistently Assist in setting up barricades, signage, and other safety controls on jobsites. Participate in Job Hazard Analysis with operator on each job after work is reviewed with site contact. Review safety plan with operator to assess need for respirator use when performing tasks that require respirator use Assess safety risks with operator associated with working in extreme environments (take breaks in heat) Use tools and equipment when possible, to minimize physical exertion and risk of injury Report near misses Operate vehicles and equipment in a safe and professional manner at all times Learn safe use of equipment with body positioning, keeping guarding on tools, using mounted drills when necessary, etc. Administration & Communication Support Operators in completing job-related paperwork Turn receipts in in a timely manner Communicate respectfully with team members, clients, and supervisors. Report progress, challenges, and delays to the Operator or Field Manager. Professional Development Participate in on-the-job training to learn tool operation and industry practices. Develop proficiency in basic concrete sawing, drilling, and demolition tasks. Show initiative and readiness to advance toward Operator role within 1-2 years Qualifications High school diploma or equivalent preferred. Previous construction or labor experience helpful but not required. Strong physical stamina. Willing to work in weather conditions that may be adverse (hot/cold/rain) Good driving record with current license Strong mechanical abilities Safety Oriented Self-motivated Problem solving ability Time management skills Willing to work hard Dependable & reliable Work as a team Career Oriented Willing to learn Mathematical aptitude (willing to train measurements & calculations) Normal periods of sitting and standing in an office environment. Lifting and/or pushing objects up to 25 lbs. on a regular basis We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Responsibilities: Assist pipefitters with the layout, assembly, and installation of piping systems according to specifications and blueprints. Transport and organize materials, tools, and equipment to and from the job site, ensuring they are readily available for use. Prepare work areas by cleaning and organizing spaces, removing debris, and ensuring a safe working environment. Perform basic pipefitting tasks under the supervision of experienced pipefitters, including cutting, threading, and assembling pipes. Follow all safety protocols and procedures, wearing appropriate personal protective equipment (PPE) and participating in safety meetings. Clean, maintain, and store tools and equipment properly to ensure they are in good working condition. Assist in maintaining accurate records of work performed, materials used, and any issues encountered during the project. Education Requirements/Qualifications: Previous experience in construction or a related field is preferred but not required. Willingness to learn and gain experience in pipefitting is essential. High school diploma or equivalent preferred. Job Requirements/Special Skills: Basic understanding of construction practices and safety procedures. Ability to follow instructions and work well in a team environment. Knowledge of various pipefitting techniques and tools. Good communication skills and a positive attitude. Strong physical stamina and the ability to perform manual labor, including lifting heavy objects Ability to work in conditions of varying heat and cold where noise levels are at or above 90 decibels

Job Description Founded in 1956, the Jacuzzi Brand has grown to become the modern-day Jacuzzi Group, the premier manufacturer of functional products for the home and outdoor space found in more than 60 countries. Jacuzzi Bath Remodel is the fastest growing business unit of Jacuzzi Group with 9 successful locations launched nationwide in under 2 years. Our BRAND NEW Raleigh, North Carolina location makes 10 total locations Nationwide. Jacuzzi Bath Remodel combines our premium materials, knowledgeable sales team, experienced in-house certified installers and over 60 years of proven excellence to deliver the highest standard of customer satisfaction. Jacuzzi Bath Remodel is hiring Construction - Apprentice Installers. If you are looking for a career in Construction or Installation, please apply now! What we offer our Construction - Apprentice Installers: We provide trucks and tools! 40-hour work week with plenty of overtime (paid at 1.5x). Typical schedule is Monday- Friday + overtime. Hourly pay rate of $19.00/hr. A clear path to advancement and career development, become a Lead Installer in under a year! Requirements of a Construction - Apprentice Installer: 1+ years of experience in general construction. Basic knowledge of tools and construction practices. Some experience with carpentry, demolition, framing, drywall installation or repair, tile work, remodeling, or plumbing. Must be proficient with using a tape measure. Comfortable lifting 50+ lbs. consistently. Ability to interact professionally with customers. For insurance purposes Apprentice Installers must be able to pass a DMV check. What we are looking for in our next Construction - Apprentice Installer: Punctual Hard worker Willingness to learn and grow within the company. Desire to be with a great company long term. Providing a great customer experience Benefits We provide the truck and the tools! 40 hour work week with plenty of overtime (paid at 1.5x). Typical schedule is Monday- Friday + overtime Hourly pay rate is $19/hr. Benefits: 12 days of paid vacation; Medical/Vision/Dental Insurance, paid holidays; 401K. Apply today and start next week!

As of 10.8.2020 Job Summary: The position of the Installation Helper is responsible for assisting the Installer in performing customer installations according to agreed-upon project timeline and costs. Essential Functions: Assist Installer with performing customer installations according to plan: Read and interpret blueprints and art work Operate a boom truck, workout of baskets, lifts, scaffolding Climb ladders and perform work while on ladders Use and operate a wide variety of power tools, ranging from drills to jackhammers Perform electrode/arch welding Maintain awareness for installation issues and report to immediate supervisor Check product for completion and proper loading prior to leaving facility Perform quality checks to avoid rework on installations Assist Installer with completing required documentation for each job site Complete Bill of Lading (BOL) before leaving facility Document job status by taking photographs and completing written documentation Abide by employment policies as established by principles Participate in safety training and inspections Perform routine checks and maintenance on all company vehicles, equipment and tools Learn OSHA and state DOT requirements Attend safety meetings and training Maintain awareness of safety risks and bring to manager's attention Abide by all safety regulations when in Allen facilities and when working at customer site General Expectations Make travel arrangements as necessary Submit expenses at least weekly Schedule maintenance/repairs to company vehicle Attend meetings and conference calls as required MUST possess a valid United States Passport 5. Follow the rules and regulations related to the safety of all employees working for the Company Adherence to all mandated safety procedures including: driving policy, production area safety requirements and fire safety Safety requires all employees to review materials provided by the Company related to any updates on safety procedures Informs management of any safety related issues 6. Ensures safety of self and others through proper use and care of equipment/work area Handles and operates all equipment in a careful and safe manner Maintains tools and equipment in good working order and stores them properly Keeps all work areas neat and clear of potential hazards Perform other duties as assigned Competencies: Ability to prioritize tasks and handle numerous issues simultaneously Organized, detail and results oriented Strong analytical and problem-solving skills with the ability to exercise sound judgment and make good decisions based on the best interests of the company Strong sense of urgency to complete tasks in a timely manner Ability to work independently, with minimal supervision Mechanical capabilities Basic mathematical skills to include but not limited to adding, subtracting, multiplication, division, and percentages Ability to read a tape measure Ability to work in a fast-paced, high-volume environment Ability to read blue prints and interpret sign/shop drawings and specifications Thoroughness/detailed Time management Apply personal safety measures including utilizing the correct PPE Ability to use electric hand tools including a paint gun and sander Ability to mix paint and learn new paint systems Ability to take measurement of a job (ex: using a tape measure, steel rule, tri square) Problem solving Time management Ability to climb ladders Ability to work with fractions including adding and subtracting Ability to convert inches to feet General electrical experience Work Environment: While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The noise level in the work environment can be loud. The employee is exposed to a variety of extreme conditions at job sites. This position is performed in outside weather conditions. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential function of this job. While performing the duties of this job, the employee is often required to perform the following activities: Standing. Walking. Moving about on foot to accomplish tasks, particularly for long distances or moving from one work site to another. Sitting. Ability to sit at a desk for long periods of time. Fingering. Picking, pinching, typing or otherwise working, primarily with fingers. Grasping. Applying pressure to an object with the fingers and palm. Talking. Expressing or exchanging ideas by means of the spoken word. Hearing. Perceiving the nature of sounds at normal speaking levels with or without correction. Ability to receive detailed information through oral communication, and to make the discriminations in sound. Light work. Exerting up to 10 pounds of force occasionally, and/or up to 5 pounds of force frequently, and/or negligible amount of force constantly to move objects. Visual Acuity. To perform close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; and visual inspection. Reaching: Extending hands and arms in all direction Forward bending, squatting, overhead reaching, kneeling/crawling, and climbing Continuous standing Lifting: Up to 70 lbs and team lifting up to 100 lbs Carry and use 5 lb to 10 lb power tools or paint containers very frequently Pushing and pulling Moderate level of hand to eye coordination and dexterity including picking, pinching, holding, grasping and repetitive flexion/rotation Position Type/Expected Hours of Work: This is a full-time, 40 hour a week position with overtime as required. Travel: Up to 75% travel is required for this position including extended stays and possible weekends. Educational Requirements: Highschool diploma or GED. Preferred Educational Requirements: Technical school training or certification. Knowledge Requirements: Current driver's license and clean driving record; CDL preferred Sign industry experience Construction industry experience Advanced computer proficiency General construction methods Hand tools OSHA general industry standards Computer proficiency including Microsoft Office Suite (Outlook, Word and Excel) Electrode/arc welding General Disclaimer: The duties listed above are intended only as illustrations of the various types of work that may be performed. Other duties may be assigned as needed by the Company. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The job description does not constitute an employment agreement between the employer and employee and is subject to change by the employer as the needs of the employer and requirements of the job change. Allen Industries is an Equal Employment Opportunity, Affirmative Action Employer. We consider applicants for all positions without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, marital, disability or veteran status.

We are looking for an Industrial Pipe Fitter that will assemble, layout, install and maintain pipe systems. Please note this is a full time position with full benefits and not a contract or short-term assignment. • Read blueprints and specification to determine the scope of work: locations, quantities, and material specs. • Selects type and size of pipe, and related materials and equipment according to specifications • Cuts, threads, bends and assembles the pipes. • Prepare, cut, fabricate, layout, fit, position, and assemble piping components together in various positions. • Bolt, clamp, and tack-welds parts to secure in position for welding. • Install hangers, supports, valves and components according to piping system plans and specifications. • Perform leak tests to ensure the quality of the pipe and the piping systems. • Proper identification and use of tools required for tasks. (grinders, drills, beveling machine, etc.) • Operate forklifts & overhead cranes. • Hoist loads using slings, chains, shackles, hooks, cables, and other rigging equipment. • Maintain safe and clean work environment. Qualifications • Demonstrated industrial construction/maintenance experience. • Must be proficient installing copper. • Ability to read prints and construction drawings. • Must understand how to read and interpret ISO's, blueprints, technical manuals and instructions to determine work procedures • Must have 4+ years' experience with pipe fitting processes. • Ability to take detailed instruction. • Positive “can do” attitude, strong work ethic and a team player. • Good problem-solving abilities, communication skills, aptitude and manual dexterity. • Ability to work with minimum supervision. • Must be able to read & understand weld symbols, weld procedures, mechanical and structural drawings. • Ability to use Oxy/fuel & Plasma hand cutting torch. • Daily housekeeping of shop and/or work area. • Flexible working schedule to support project needs. • Knowledge of OSHA guidelines and safe work practices. Considered a Plus • Pipe fitting experience with ASME B31.3, B31.4 and API 1104 codes. • Welding and/or tacking experience using GTAW process. • Fit-up & layout experience on structural/misc. steel. • Familiarity with weld inspections, inspection documentation. • NCCER Certification as an Industrial Pipe Fitter. • Formal/technical education. What We Offer Supportive work environment Opportunity to learn additional skills as well as upward mobility Eight paid holidays Two weeks of vacation first year Company paid life insurance, short and long term disability 401(k) match of 100% up to 4% Must have reliable transportation. Pre-employment drug test required. Relocation is not available. Due to most jobs being local per diem is also not available. AC Corporation is an Equal Opportunity/Affirmative Action employer and will consider all qualified applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Job DescriptionDescription: We're not your typical plumbing company. At Streamline Services, we're a tight-knit team driven by our shared core values and a genuine love for what we do. If you're a plumber looking for a place where your hard work is appreciated, your manager invests in you, and your birthday is a paid holiday, then you've found your home! What You'll Be Doing: This role is all about expertise and people skills. We need a professional who can diagnose plumbing problems, perform flawless repairs, and, most importantly, build lasting relationships with our customers. Be the Expert Guide: Inspect, diagnose, repair, and replace. You'll translate complex issues into clear options, guiding customers to confident decisions. Master the Flow: Efficiently manage your work, maintain accurate records, and keep in close communication with our dispatch team. Keep It Polished: Ensure your company vehicle is clean and stocked-it's your office on wheels! Embrace the Culture: Commit to being Dependable, Positive, and Eager to Learn, Humble, Process Drive and Dedicated-these aren't just words; they're how we operate every day, Requirements: You're a Great Fit If: You have 1-3 years of residential plumbing experience. You're an exceptional communicator with top-notch customer service skills. You can lift up to 50 lbs and handle the physical demands of the job (confined spaces, various environments). You have a clean driving record and are ready to jump into our systems (Service Titan experience is a plus!). Your Unbeatable Benefits Package:We're serious about taking care of our team. Check out what you get: Competitive Base Pay paired with Performance Bonuses that offer unlimited earning potential. 401k with a 3% Company Match. $100% Employer-Paid Medical and Dental Insurance. 2 Weeks PTO and 6 Holidays. Special Paid PTO Day for your Birthday and a loved one's birthday! Fully Stocked, Take-Home Company Truck. Company Phone and Tablet 8 paid uniforms Tool Purchase Program. Bi-Weekly Paid Training and dedicated 1:1 time with your Manager. A supportive team that celebrates success and gives back to the community! Stop dreaming about a better job. Start building a better career. Apply Today! Equal Employment Opportunity Statement: Streamline Services is an equal-opportunity employer. We are committed to creating a diverse and inclusive work environment and are proud to be an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.

Responsibilities: Aid pipefitters in the layout, assembly, and installation of piping systems, ensuring adherence to project specifications and blueprints. Measure, cut, thread, and bend pipes to required angles using hand and power tools, preparing materials for installation. Assist with the installation of pipe systems, supports, fixtures, and equipment for various piping systems such as water, gas, and steam. Inspect and test installed systems to identify leaks and other issues, making necessary adjustments and repairs as needed. Adhere to all safety regulations and protocols, ensuring a safe work environment by wearing appropriate personal protective equipment (PPE) and participating in safety meetings. Maintain tools and equipment in good working condition, ensuring they are cleaned, stored properly, and available for use when needed. Help maintain accurate records of work performed, materials used, and any issues encountered during the project. Identify and resolve issues that may arise during the project, providing practical solutions to maintain project timelines and quality standards. Assist in training and mentoring less experienced helpers, promoting skill development and adherence to best practices within the pipefitting trade. Education Requirements/Qualifications: Minimum of 2-3 years of experience as a pipefitter helper or in a similar role, with a strong understanding of pipefitting techniques and practices. High school diploma or equivalent; completion of relevant vocational training or an apprenticeship program is preferred. Job Requirements/Special Skills: Proficient in using hand and power tools related to pipefitting. Ability to read and interpret blueprints, schematics, and technical drawings. Strong problem-solving skills and attention to detail. Excellent communication and teamwork abilities. Ability to work in conditions of varying heat and cold where noise levels are at or above 90 decibels