Helper jobs in Myrtle Grove, FL - 94 jobs

Job DescriptionSalary: $23.00- $24.00 Must be able to pass a background check. Tentative Work Schedule: Monday - Saturday 7AM-5:30PM Job Duration - 6 months (approximately) Job On-Site Start Date - December 29, 2025 Job Duties Looking for an ambitious, hardworking individual to join the team. Manually moving freight, stock, or other materials and performing other general labor as instructed. Follow instructions from construction project managers and foreman Cleaning the construction site by removing hazards, materials and debris from the worksite. Loading materials from trucks through the loading docks using hand trucks and other freight moving equipment. Must be able to tolerate extreme heat and extreme cold . Must be able to lift 50 lbs above shoulder height on a regular basis as well the ability to bend, stoop, squat, walk, climb, and stand for 4 or more hours consecutively with or without accommodations. May be required to wear personal protective equipment including but not limited to hard hats, gloves, protective eye wear, fire retardant clothing. Must be able to read and communicate in English to understand technical documents, safety procedures, and instructions relevant to job duties. English proficiency is required due to operational and safety communication needs. Other duties as assigned Proof of home address will be required in order to qualify for per diem. Job Type: Full-time Benefits Include: Craft Retention Bonuses BCBS Health Insurance Dental & Vision Insurance Short Term Disability Paid Time Off 401k with employer matching CSFCO is an Equal Opportunity Employer. We do not discriminate based on race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age (40 or older), disability, genetic information, veteran status, or any other protected status under applicable federal, state, or local laws.

Duties and Responsibilities Unload and load furniture, product, equipment or supplies. Assist in loading and securing all moving equipment necessary for the job in truck/van. Load and unload of warehouse storage vaults, general warehouse work, and packing material salvage. Carefully wrap furniture in residence or office, wrap fixtures with pads to prevent damage, shrink wrap all upholstered furniture. Learn to eventually prepare inventories for international, interstate, intrastate, and storage. Pad, stack, and secure items in position on van/truck/vault to prevent damage during transport. Load and unload truck/van/vault with or without assistance of help by hand or by use of hand-truck, two-wheel dolly, four-wheeled cart, or other special handling equipment. Assist in preparation of destination residence/office for delivery of goods. Place rug runners and door jam protectors in place, sweep front porch, steps and drive-in pathway to residence/office to remove debris. Install driveway protection under vehicle engine. Place and arrange furniture to customer's specifications and satisfaction. May need to reassemble some furniture or shelving. Assist in ensuring that equipment is accounted for and all debris is removed from residence/office.

Embark on a rewarding career with Fire Safety and Protection (FSP)! FSP's rich multi-decade history is built on lasting customer relationships and continued high-quality service. We are proud to offer a full suite of life safety solutions across the U.S. and Canada. Our certified technicians deliver code-compliant fire safety solutions tailored to our customers' needs. It's our goal to be the single source for our customers' inspection, maintenance, repair, design and installation of their fire and security systems. With continuous training in the latest technologies and regulations, our customers trust us for high-quality workmanship that keeps their building systems in optimal condition for ongoing safety. We are military friendly! At FSP, we believe military veterans bring unmatched dedication, discipline, and a strong sense of purpose-qualities that align perfectly with our mission to protect lives and property through high-quality fire and life safety services. Our team values leadership, precision, and teamwork-making FSP a natural next step for those who have served. FSP accepts technical certification credit for military experience in relevant fields. Learn more here. Apply today and become part of a company where your skills and dedication are valued. Job Description: The basic function of the Sprinkler Helper will be to work with and learn from the Sprinkler Fitter on the installation and service of fire suppression and maintenance of safety systems. Our ideal candidate will have a strong desire to learn and grow, be customer and safety focused, and be able to work diligently as part of a team. Responsibilities: Assist Fitter on install and service jobs, traveling to job sites as required by the specific assignment. Interact with customers on a daily basis Follow Safety rules and requirements Other duties may be required. Minimum Requirements: Minimum 0-1 year of experience. Excellent administrative, organizational and computer skills. Good mechanical aptitude. Ability to adapt to changing needs and provide excellent customer service. Ability to communicate effectively both verbally and written Ability to transport equipment and tools weighing up to 40 lbs. Valid Driver's License with clean driving record and no DUI convictions Physical Requirements: Capable of performing physical labor to include carrying and moving equipment and tools weighing up to 70 lbs. Able to work in unusual and sometimes difficult positions such as climbing ladders, scaffolding and high lift equipment up to 60 feet, working within ducts, crawl spaces, above ceilings, etc. Read and understand construction blueprints, diagrams, and specifications used in installation activities Ability to work flexible hours. Benefits: Fire Safety and Protection (FSP) provides comprehensive benefits to ensure the wellbeing of our employees: Company paid benefits: Life/AD&D Long Term Disability Employee Assistance Program Paid Time Off (PTO) 7 Paid Holidays, and 1 floating holiday (employee choice) Paid jury duty and bereavement leave Voluntary Health Benefits: Medical, Dental, Vision Voluntary Life/AD&D Voluntary Short-Term Disability Supplemental Benefits: Voluntary Accident, Voluntary Critical Illness Legal Services HSA / Health Care and Dependent Care FSA Plans Why FSP? Supportive Culture: We value our employees and provide ongoing training. Career Growth: Advance your career with guidance from industry experts as well as tuition reimbursement and pay incentives. Broad Opportunities: With offices in the eastern U.S. and Canada, we offer diverse locations and roles. Client-Centered: We serve commercial property owners and facility managers with dedication and care. Rapid Growth: Join us as we expand and invest in new markets. Professional Development: Professional Development: FSP is committed to providing opportunities for employee career advancement within the Fire and Life Safety Industry. As part of this commitment, FSP offers various program sponsorships that reimburse employees for the costs of study materials and certification testing and provides tiered pay increases upon achievement of certification. Health & Safety: The personal safety and health of each employee of our organization is of primary importance. We believe that our employees are our most important assets and that their safety is our greatest responsibility. It is Fire Safety and Protection, LLC's objective to ensure a safe and productive working environment for all employees. At FSP we believe that illnesses and injuries can and must be prevented. We believe in empowering each employee to create and maintain a safe and healthy environment. FSP Equal Opportunity Employer Statement: We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

The Hiller Companies, LLC has an immediate opening for Fire Sprinkler Fitter. If you are a dedicated professional with a passion for fire protection and safety, we invite you to apply today. The Hiller Companies is a leading provider of fire protection and safety solutions, dedicated to safeguarding lives and property all around the world. Headquartered in Mobile, Alabama, Hiller extends its reach globally as well as in domestic markets with offices across the United States. With over 100 years in the industry, our mission is to ensure the highest standards of safety and innovation in comprehensive fire protection services, including installation, inspection, maintenance, and repair of critical fire and life safety equipment. Our team remains laser-focused on one goal - making the world a safer place. Job Summary: A Fire Sprinkler Fitter is responsible for installing, modifying, and repairing fire sprinkler systems. Fire Sprinkler Fitters will be responsible for fitting, fabricating, and installing sprinkler pipes and related components, ensuring that all work is completed according to the applicable codes and standards Key Responsibilities: Install overhead sprinkler piping, standpipe systems, sprinkler system risers, and specialty fire protection systems including wet, dry, pre-action, and deluge systems. Assemble and install various system components including hangers, valves, fittings, backflow prevention, bells, drains, fire pump and stored water supply, and other components of fire sprinkler systems according to design plans. Interpret blueprints, drawings, and specifications to determine the layout and installation requirements of fire sprinkler systems. Measure and cut piping materials, such as steel, copper, and CPVC, to specified lengths and dimensions using cutting tools and equipment. Collaborate with other construction trades, such as plumbers, electricians, and HVAC technicians, to coordinate installation activities and ensure compatibility with other building systems. Test and inspect newly installed fire sprinkler systems to verify proper operation and compliance with design specifications and regulatory requirements. Attend scheduled in-house meetings/training and contribute recommendations for improvement. Assist in the development and training of fire sprinkler apprentices, in good installation procedures in order to create and maintain a high degree of professionalism and safety practices. Provide technical consultation and support to company apprentices, technicians, designers and shop employees. Respond to other duties/responsibilities that are assigned by the Superintendent and Project Foreman Maintain a clean and organized work environment, always adhering to safety guidelines, protocols, and procedures. Qualifications What We Are Looking For: High school diploma or equivalent Ability to read and interpret blueprints, drawings, and technical specifications to complete installations accurately. 2+ years of experience as a Fire Sprinkler Fitter, or Fire Sprinkler Helper for commercial and industrial installation Strong knowledge of fire sprinkler system components, installation techniques, and industry standards, including NFPA 13 and local building codes. Proficiency in using hand and power tools, pipe threading machines, and other equipment used in fire sprinkler installation Excellent communication and customer service skills, with the ability to interact professionally with clients and team members. Valid driver's license with a clean driving record and willingness to travel to client sites as needed. Ability to work independently with minimal supervision and as part of a team in a fast-paced environment. Physical Requirements: While performing the essential functions of this job the employee is regularly required to stand, walk, use hands to finger, handle, or feel, reach with hands or arms, stoop, kneel, crouch, or crawl, and is occasionally required to lift and/or move heavy objects. Ability to lift and carry up to 50 pounds. Comfortable working in various environments, including industrial facilities, commercial buildings, and outdoor settings, which can potentially expose employees to noise, dust, heat stress, thermal stress, low light conditions, heights, etc. Capable of standing, walking, bending, and kneeling for extended periods. Ability to work at heights and in confined spaces as needed, which would require use of fall protection equipment and other safety devices Capable of using hand and power tools, including specialty tools resulting in cutting, grinding, drilling, fastening and other methods resulting in torque, vibration, noise, etc. Hiller is a drug-free workplace, an equal opportunity employer and ADA compliant. We are proud to operate according to our Core Values: Passion to Perform, Trust to Act, Act Responsibly, and Make it Fun. Most employee benefits start from the first day of employment, including: Competitive compensation package, including pay advancement opportunities for industry certifications and continuing education. Comprehensive benefits package, including health, dental & vision insurance, retirement plans, company paid & voluntary life insurance, company paid short term disability, voluntary long term disability, critical illness & accident insurance and paid time off. Company-provided training, tools, and equipment, including $150 annual boot allowance for employees required to wear safety boots in their jobs. Career advancement potential within a growing company. Join us in our mission to provide comprehensive fire protection solutions and peace of mind to our customers, and together, let's make the world a safer place.

Job Description I.C.E. Contractors is currently seeking Electrician Helpers and Entry Level Laborers who are eager to learn and are passionate about the electrical trade. This position services our Pensacola, FL location and surrounding areas and will be responsible for tasks pertaining to, but not limited to, loading and unloading heavy materials, demolition, and following directions from supervisors. We seek individuals who are interested in on-the-job training and who are motivated to learn and exemplify a hard work ethic. If this is you, I.C.E. Contractors is a great company for you! Responsibilities Learn from the master electrician and/or project managers/foreman and completing all assigned duties Perform all work in a manner that meets and follows electrical codes, blueprints, and standards Prep construction sites by cleaning and maintaining job sites, clearing of hazards and obstacles Load or unload construction materials Help electricians when necessary Follow instructions from supervisors Ready to lean from on-the-job training when necessary Perform site clean-up Qualifications Completion of an electrician program at a technical or trade school preferred 0-3 years of electrical experience Valid driver's license in state of practice Ability to lift, carry, push, and pull up to 50 pounds Ability to bend, climb, squat, reach, and kneel Demonstrated ability to operate hand and power tools associated with electrical work Ability to calculate basic mathematical problems Willing to work overtime Why our employees love working for I.C.E. Contractors, Inc. We offer a Great Benefits Package - Health, GAP Health Insurance, Dental, Vision, Short-Term Disability, Long-Term Disability, Company Paid Basic Life Insurance, Voluntary Life Insurance Other benefits include Holiday Pay as well as Paid Time Off - Use it, cash it. We also offer a 401(k) program that the company matches up to 4%. I.C.E. Contractors, Inc. is an Equal Employment Opportunity (EEO) employer committed to diversity, inclusion, and equal opportunity. We value qualifications and merit without regard to race, color, religion, sex, national origin, age, disability, marital status, veteran status, or any other protected characteristic. We comply with all applicable laws and provide reasonable accommodations for individuals with disabilities. Job Posted by ApplicantPro

Job DescriptionPosition Description: Job Title: General Laborer Temporary PositionLocation: Mobile, AlabamaOverviewWe are looking for dependable and hardworking General Laborers for a temporary assignment in Mobile, AL. This role involves assisting with a variety of manual labor tasks in support of construction, maintenance, and facility projects. The ideal candidate is reliable, safety-conscious, and ready to work in a fast-paced outdoor environment. Key ResponsibilitiesPerform general labor duties such as cleaning, loading/unloading materials, and assisting skilled tradespeople. Operate basic hand and power tools safely and efficiently. Prepare and maintain work areas by removing debris, sweeping, and organizing materials. Assist with site setup and teardown, including moving equipment and supplies. Follow all company safety guidelines and wear required protective gear. Support team leads and supervisors as directed to ensure project completion on schedule. RequirementsPrevious experience in construction, maintenance, or warehouse work preferred but not required. Ability to lift up to 50 lbs and perform physical labor for extended periods. Must be dependable, punctual, and willing to work outdoors in varying weather conditions. Ability to follow instructions and work as part of a team. Reliable transportation to and from the job site in Mobile, AL. $15. 00 - $16. 00 Hourly

Established in 2009, Impact Fire Services was the vision of a group of experienced industry professionals that wanted to build a best-in-class fire protection and life safety company. Through superior customer service and technical expertise, we have developed long-standing relationships with the leading businesses in our markets. We are a full-service fire protection company, providing installation, maintenance, inspection, monitoring, and retrofit of fire safety systems. Come join a dynamic team of fire protection professionals, many of whom carry NICET and manufacturer certifications in leading brands. Impact Fire has deep experience supporting many industries including retail, healthcare, education and restaurants. Today, we operate over 30+ district offices and employ over 1,100 employees across multiple states throughout the USA. At Impact Fire Services you can learn a trade with multiple career paths in fire and life safety while benefiting from an employee focused company culture that allows you to gain mentorship and training provided by leading experts at one of the fastest growing companies in the industry. Whether you have transferable skills, prior industry experience, or are looking to start your journey, our apprenticeship programs will give you the support and knowledge you need to go further in your career. Why work with us? At Impact Fire, we are a group of hardworking, dedicated fire protection professionals committed to protecting lives and property from fire. Our cohesive team spirit and customer service-oriented culture are expressed in all that we do. We operate with the belief that every team member plays a critical role in our success. We operate in 30+ district office locations across the United States, supporting industries ranging from retail and healthcare to education and restaurants. Benefits of joining Impact Fire Services When you join Impact Fire you will receive: + Competitive compensation + Pay is on a weekly cycle, every Friday + Career Advancement Opportunities + Competitive benefits, including healthcare, dental, vision, life insurance, paid time off and holidays + Company paid short and long-term disability + Immediately vested in our 401(k) company match + Full-time employees participate in our Shared Ownership Program which offers a monetary bonus aligned to the company's long-term success. This program fosters an ownership mindset and ensures that every employee meaningfully shares in the success they help create. + Exceptional guidance and support from our managers + Collaborative culture & environment + Robust training opportunities with company reimbursement upon achieving required licensing + Apprenticeship programs for fire sprinkler, fire alarm and inspection positions + Opportunity to work alongside some of the best talent in the fire protection industry This position is considered a trainee who is learning the mechanics of sprinkler system installation. This position may be responsible for site clean-up, unloading, staging, and distributing work material to other employees at a job site. Position will also cut and thread pipe. May install and test fire sprinkler systems under the close guidance of a Sprinkle Fitter. Position receives guidance and direction regarding day-to-day work tasks from a Sprinkler Fitter. Continued employment is contingent on successfully obtaining applicable state licensing. The Helper is also responsible for assisting in maintaining a clean, well-organized vehicle and ensuring a safe environment for his/herself, co-workers, and customers. Job Responsibilities + Work with the Fitter to achieve any tasks necessary to complete work on a given job site in a timely, effective manner. + Learn applicable fire protection codes and obtain applicable state licensing. + Protect and maintain company equipment. + Maintain their vehicle in accordance with company procedures and ensure it is clean and organized. + Perform any other tasks assigned by the Fitter and/or the Fire Alarm and Sprinkler Manager. Job Qualifications + Ability to follow verbal work instructions/directions. + Capable of working independently and completing duties and projects with moderate supervision. + Demonstrate the initiative to learn skills of the trade. + Ability to learn applicable installation, inspection, and servicing codes. + Ability to perform physical activities outlined in the accompanying physical requirements checklist. + Ability to read labels, signage and directions along with basic math computation skills. + Demonstrate strong customer service orientation. + Strong organization skills, positive attitude, and ability to quickly learn. + Possess a valid driver's license and driving record that meets company requirements. Successful completion of a drug test and pre-employment background screening is required. MVR checks are required for all driving positions. We look forward to talking with you about career opportunities with Impact Fire Services. For consideration, please apply on-line. Employment with an Equal Opportunity Employer (EOE) including disability/veterans. Job Details Pay Type Hourly

Established in 2009, Impact Fire Services was the vision of a group of experienced industry professionals that wanted to build a best-in-class fire protection and life safety company. Through superior customer service and technical expertise, we have developed long-standing relationships with the leading businesses in our markets. We are a full-service fire protection company, providing installation, maintenance, inspection, monitoring, and retrofit of fire safety systems. Come join a dynamic team of fire protection professionals, many of whom carry NICET and manufacturer certifications in leading brands. Impact Fire has deep experience supporting many industries including retail, healthcare, education and restaurants. Today, we operate over 30+ district offices and employ over 1,100 employees across multiple states throughout the USA. At Impact Fire Services you can learn a trade with multiple career paths in fire and life safety while benefiting from an employee focused company culture that allows you to gain mentorship and training provided by leading experts at one of the fastest growing companies in the industry. Whether you have transferable skills, prior industry experience, or are looking to start your journey, our apprenticeship programs will give you the support and knowledge you need to go further in your career. **Why work with us?** At Impact Fire, we are a group of hardworking, dedicated fire protection professionals committed to protecting lives and property from fire. Our cohesive team spirit and customer service-oriented culture are expressed in all that we do. We operate with the belief that every team member plays a critical role in our success. We operate in 30+ district office locations across the United States, supporting industries ranging from retail and healthcare to education and restaurants. **Benefits of joining Impact Fire Services** When you join Impact Fire you will receive: + Competitive compensation + Pay is on a weekly cycle, every Friday + Career Advancement Opportunities + Competitive benefits, including healthcare, dental, vision, life insurance, paid time off and holidays + Company paid short and long-term disability + Immediately vested in our 401(k) company match + Full-time employees participate in our Shared Ownership Program which offers a monetary bonus aligned to the company's long-term success. This program fosters an ownership mindset and ensures that every employee meaningfully shares in the success they help create. + Exceptional guidance and support from our managers + Collaborative culture & environment + Robust training opportunities with company reimbursement upon achieving required licensing + Apprenticeship programs for fire sprinkler, fire alarm and inspection positions + Opportunity to work alongside some of the best talent in the fire protection industry This position is considered a **trainee** who is learning the mechanics of sprinkler system installation. This position may be responsible for site clean-up, unloading, staging, and distributing work material to other employees at a job site. Position will also cut and thread pipe. May install and test fire sprinkler systems under the close guidance of a Sprinkle Fitter. Position receives guidance and direction regarding day-to-day work tasks from a Sprinkler Fitter. Continued employment is contingent on successfully obtaining applicable state licensing. The Helper is also responsible for assisting in maintaining a clean, well-organized vehicle and ensuring a safe environment for his/herself, co-workers, and customers. **Job Responsibilities** + Work with the Fitter to achieve any tasks necessary to complete work on a given job site in a timely, effective manner. + Learn applicable fire protection codes and obtain applicable state licensing. + Protect and maintain company equipment. + Maintain their vehicle in accordance with company procedures and ensure it is clean and organized. + Perform any other tasks assigned by the Fitter and/or the Fire Alarm and Sprinkler Manager. **Job Qualifications** + Ability to follow verbal work instructions/directions. + Capable of working independently and completing duties and projects with moderate supervision. + Demonstrate the initiative to learn skills of the trade. + Ability to learn applicable installation, inspection, and servicing codes. + Ability to perform physical activities outlined in the accompanying physical requirements checklist. + Ability to read labels, signage and directions along with basic math computation skills. + Demonstrate strong customer service orientation. + Strong organization skills, positive attitude, and ability to quickly learn. + Possess a valid driver's license and driving record that meets company requirements. Successful completion of a drug test and pre-employment background screening is required. MVR checks are required for all driving positions. We look forward to talking with you about career opportunities with Impact Fire Services. For consideration, please apply on-line. Employment with an Equal Opportunity Employer (EOE) including disability/veterans. **Job Details** **Pay Type** **Hourly**

**Now paying up to $33.36 / hr** REPORTS TO: Supervisor -“ A ” Class Pipe Fitter reports to and takes direction from a Pipe Supervisor on a daily basis Overall purpose of job: To work within a team of Pipe Fitters to achieve maximum production in minimum time, standards and quality in keeping with company policies, while maintaining a positive and motivated team environment. SUMMARY To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The qualifications listed below are representative of the minimum knowledge, skill, and/or ability desired. The individual must have working knowledge of procedures, strong mechanical aptitude and the ability to follow directions. The individual must possess experience in the trade, knowledge of ship terminology, ability to interpret engineering drawings. The individual must demonstrate ability to interpret job specifications and perform work on marine vessels. Must be able to follow directions and work with limited supervision. Must be willing to develop other team members skill levels. ESSENTIAL QUALIFICATIONS, DUTIES AND RESPONSIBILITIES include but are not limited to the following: Read and interpret drawings, blueprints and specifications to determine layout requirements Cut openings for pipe in walls, floors and ceilings using hand or power tools or machines Ability to Measure, cut, thread and bend pipe to required shape using hand and power tools Test system for leaks using testing equipment Clean and maintain pipe units and fittings and flush system Install clamps, brackets and hangers to support piping system using hand and power tools Ability to install pipe systems on board vessels in a safe and productive manner. Ability to safely rig equipment following all OSHA requirements. Inspection of work, identification of potential problems, initiation of corrective actions. Increase awareness of Quality procedures within department Ensure correct work procedures adhered to. Perform as a productive working team member that meets daily goals set by the supervisor. Continuously improve communications and flexibility within the team. Help build the team environment. Build pride of workmanship and quality through on job training. Contribute towards innovation / productivity improvements. Assist in the control of waste elimination, e.g. materials, consumables etc. Assist supervisor to maintain control of department equipment and its maintenance. Prepared to Step up as supervisor when required Must have full set of personal tools Work towards the team goal of delivering the vessel on time. Always be ready to start shift on time Follow Austal guidelines and procedures Do not leave job early or return late from break times Ensure work area is left clean, all equipment and tools are stowed away safely and protected against damage EDUCATION and/or EXPERIENCE 1 year minimum work experience as a B-class pipe fitter at Austal or 2 years experience in a similar role at comparative employer. Pass the “A” Class pipe fitters tests; written with a minimum score of 70% and practical with a minimum score of 90%. LANGUAGE SKILLS Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. MATHEMATICAL SKILLS Ability to add, subtract, multiply, divide, and measure using the metric system. REASONING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems that may arise in certain situations. Liaises With Supervisors Foremen PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be able to tour all vessels and work sites. While performing the duties of this job, the employee is regularly required to stand, walk, use hands to manipulate, handle, or feel, reach with hands and arms, climb and balance, stoop, kneel, crouch, or crawl, and talk or hear. The employee is occasionally required to sit. Specific physical requirements include but are not limited to the following: Must have the ability to bend, squat, stoop, crawl, and kneel. Perform prolonged standing. Ability to turn head from side to side and about the vertical axis. Lift/push/pull 50lbs on an occasional basis. Lift/push/pull up to 20lbs on a frequent basis. Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps). Ability to work at heights above 12' while working from ladders, scaffolding and/or man lifts. Able to work at a variety of levels (ex. waist, eye, overhead). Demonstrate the ability to safely and appropriately use required tools and equipment. Demonstrate good balance while working on uneven surfaces and maneuvering obstacles. Possess sufficient handgrip and coordination to carry and operate tools and equipment. Ability to utilize personal protective equipment (hard hat, safety glasses, steel-toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards. Ability to withstand cold and hot temperatures. Ability to enter 18” x 36” openings and work in confined spaces for prolonged periods of time within OSHA guidelines. Able to respond to verbal and audible sounds/commands. Able to utilize adequate visual skills. Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down. Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters whole performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to humid conditions, moving mechanical parts, high precarious places, outside weather conditions, and extreme heat. The employee is occasionally exposed to fumes and/or airborne particles, toxic or caustic chemicals, and heat and cold. The noise level in the work environment is usually very loud. PPE available and MUST be used correctly. SAFETY Must comply with company, federal, state, and local safety and environmental rules and regulations while performing daily job tasks. Equal Employment Commitment Any qualified individual with a disability who is having difficulty in completing an application because of incompatible technology or other disability-related application issues may contact us at the following phone number for assistance: ************. Austal's commitment to equal employment opportunity applies at all levels of employment, in all job titles, including the executive level, and to all employment actions, including but not limited to decisions concerning recruitment, hiring, training, and promotion.

The Mechanic Helper will assist and support the Lead Mechanics in performing maintenance and repairs on vehicles and equipment. Mechanic Helper duties and responsibilities Mechanic Helpers collaborate with other repair team members to ensure a vehicle is safely and efficiently operating to the driver's needs. Helps lead mechanic perform maintenance and repairs such as tune-ups and oil changes, checks tires and brakes, replaces spark plugs and engages in other similar tasks. Assists mechanic with electrical systems such as replacing batteries, starters, and lights. Test drives vehicles to ensure repairs are completed property. Assists in rotating tires and flushing and replacing fluids Assists in the repair and replacement of automotive parts including belts and tubes that have worn out. Learns about methods for diagnosing vehicle and equipment performance issues and work with diagnostic tools and provide reports and data to the lead mechanic to assist with repairs. Maintains work spaces and promote safety by cleaning work areas and removing hazardous materials such as oil, gasoline, or other fluids Follows established procedures for safe disposal of motor oil, tires, and other vehicle fluids. Maintains inventory of replacement parts and equipment. Inspects tools and equipment to ensure they are in working order and returns tools to proper location. Updates maintenance and repair logs for vehicles. Performs other related duties as assigned. Mechanic Helper skills and qualifications Mechanic Helpers use a variety of technical and soft skills to provide the most comprehensive repair solutions they can, including: Knowledge of vehicle diagnostic and repair. Excellent mechanical skills. Ability to follow instructions and work in a team setting and coordinate their activities with other mechanics. Ability to use power and hand tools. Excellent analytical and problem-solving skills. Ability to read service and repair manuals. Ability to complete assigned tasks in a timely fashion. Basic knowledge of computer systems and other relevant electronics A valid driver's license Good interpersonal skills Effective collaboration and communication skills Job Type: Full-time Pay: $17.00 - $19.00 per hour Expected hours: 40 per week Schedule: 10 AM - 7 PM Benefits: 401(k) 401(k) matching Dental insurance Health insurance Life insurance Paid time off Vision insurance Schedule: 8 hour shift Monday to Friday Experience: Mechanic Helper: 1 year (Required) Mechanical knowledge: 1 year (Required) License/Certification: Driver's License (Required) Work Location: In person Compensation: $17.00 - $25.00 per hour

Job DescriptionTruck Driver Responsibilities Transporting finished goods and raw materials over land to and from manufacturing plants or retail and distribution centers Inspecting vehicles for mechanical items and safety issues and perform preventative maintenance Planning routes and meeting delivery schedules Transport finished goods and raw materials over land to and from manufacturing plants or retail and distribution centers Inspect vehicles for mechanical items and safety issues and perform preventative maintenance Plan routes and meet delivery schedules Document and log work/rest periods and kilometres spent driving and retain fuel/toll receipts Input “macros” into our automated system for each stage of the loading and unloading process Comply with truck driving rules and regulations (size, weight, route designations, parking and break periods) as well as with company policies and procedures Maneuver trucks into loading or unloading positions Collect and verify delivery instructions Report defects, accidents or violations Requirements Proven work experience as a truck driver Hands on experience with electronic equipment and software (GPS, AVL units, CB etc) Ability to drive long hours and travel regularly Extensive knowledge of applicable truck driving rules and regulations No recent moving or driving violations Adaptability and foresight to handle unexpected situations (traffic, weather conditions etc) Willing to submit to background/drug checks and provide employment recommendations Trucking school diploma Valid Commercial Driver Licenses (CDL) CLASS A: Trucks or truck combinations weighing with a Gross Vehicle Weight Rating of 26,001 lbs. or more, provided towed vehicle is more than 10,000 lbs.

As a Plumber's Helper, you will support residential and commercial plumbing projects by installing plumbing systems and related materials. Assists with residential and commercial plumbing installation from underground/rough-ins, stack out to trim outs on small and large scale projects and repairs Install hangers and supports for pipes, equipment, and fixtures Regular use of basic hand tools and ability to read a tape measure Assist with the installation of materials such as copper, steel, cast iron, PVC, CPVC, PEX, and other piping Able to work off ladders, man lifts and other equipment from various heights Perform other related duties or special projects as assigned Requirements: 1 or more years of experience of plumbing experience preferred but not required Current/valid driver's license in applicable state Knowledge of basic hand tools and ability to read a tape measure High school diploma or GED preferred Basic math skills to include addition, subtraction, multiplication, and division to perform routine measurements and calculations. Ability to work with fractions, percentages, and decimals Additional Requirements: Maintain a positive, cooperative, and teachable attitude Initiative; self-motivated (driven), self-starter Complies and promotes company Safety Policy Requires basic mechanical aptitude and English language skills Analytical and problem-solving skills Regular and punctual attendance. Ability to work overtime if needed Ability to stand, squat, bend, stoop, and comfortably lift up to 50 lbs Ability to pass a full background screening Ability to pass MVR check Compensation: Wage Range Starting at: $12.00+/hr. based on qualifications & experience Comprehensive Benefits: Medical, Vision, Dental Company-paid Teledoc service Paid vacation after 1 year Training and Development Programs Employee discount programs Voluntary life insurance Voluntary accidental death & dismemberment (AD&D) Voluntary short-term disability Disclaimer: The above statements are intended to describe the general nature and level of work being performed by employees assigned to this job. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Downs Plumbing Company is an equal opportunity employer in all aspects of employment and prohibits discrimination and harassment of any type to all individuals regardless of race, color, religion, sex, sexual orientation, national origin, age, disability, veteran status, genetic information, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. We strive to foster a work environment that includes and embraces racial, ethnic and gender diversity and other individual differences. Our commitment to diversity and inclusion helps us attract and retain the best talent, enables employees to realize their full potential, and drives high performance through innovation and collaboration.

Labor One is currently hiring Pipe Fitters in SAN DIEGO, CA at a Shipyard. Pay rate is up to $23 + $160 perdiem, if eligible. Job Requirements: A pipefitter journeyman is responsible for removing, repairing, targeting, laying out, fabricating, installing, and testing marine piping systems such as Auxiliary Salt Water, Fire Main, Potable Water, Hydraulic, Compressed Air, Fuel Oil, Lube Oil, Engine Exhaust etc. in accordance with work item specifications. The Pipe Fitter journeyman is also responsible for providing direction to improvers and helpers as directed by the supervisor. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. Housing assistance available Great Hours with overtime pay Please send resume to ehinojosa@laboronetx.com

Since its foundation in 1986, Thompson Construction Group, Inc. has grown from a small, local company into one of the largest privately held companies based in South Carolina. Our diverse services portfolio includes capital projects, power services, maintenance services, disaster recovery, hydro consulting and commercial construction. We believe in investing in our employees to help them reach their professional goals, as well as their personal goals. Thompson promotes a work environment that fosters learning, leadership, and development along with a safety culture that never waivers. Thompson is headquartered in Sumter, South Carolina with offices spanning the United States, primarily southeast and central United States. Position Description Lay out, assemble, install, and maintain pipe systems, pipe supports, and related hydraulic and pneumatic equipment for steam, hot water, heating, cooling, lubricating, sprinkling, and industrial production and processing systems, applying knowledge of system operation, and following blueprints. This will be completed in a safe and timely manner with the highest quality possible. Job Responsibilities * Select type and size of pipe, and related materials and equipment, such as supports, hangers, and hydraulic cylinders, according to specifications. * Plan installation or repair to avoid obstructions and to avoid interfering with activities of other workers. * Cut pipe using saws, pipe cutter, hammer and chisel, cutting torch, and pipe-cutting machine. * Thread pipe using pipe-threading machine. * Bend pipe using pipe-bending tools and pipe-bending machine. * Assemble and install variety of metal and nonmetal pipes, using threaded caulked, soldering, brazen, fused, or cemented joints and hand tools. * Secure pipes to structure with bracket, clamps, and hangers, using hand tools and power tools. * Install and maintain hydraulic and pneumatic components or machines and equipment, such as pumps and cylinders using hand tools. * Install and maintain compressors, pumps, meters, pneumatic and hydraulic controls, and piping, using hand tools and power tools, and following specifications and blueprints. * Increase pressure in pipe system and observe connected pressure gauge to test system. * May weld pipe supports to structural steel members. * May observe production machines in assigned area of manufacturing facility to detect machinery malfunctions. * May operate machinery to verify repair. * Respiratory protection is common and may be required. * Responsible for observing and complying with all safety and project rules. * Other duties as assigned. Job Qualifications * Must be at least 18 years of age. * Must pass written Pipe Fitter test. * Must be able to read, write and communicate clearly with supervisor/co-workers and understand direction from supervisor. * Utilize basic math and a calculator to solve geometric problems associated with Pipe Fitting. * Must be able to lift up to 50 pounds, climb, bend, twist, stand and reach repetitively, operate moving equipment and work in hot/cold/damp/cramped environments. * Must be willing to work outside of craft. * Candidate may be required to pass a drug test and criminal background check based on job location/requirements. * Required Tool List for Pipe Fitter: * 1 each 10" & 12" Crescent Wrench * 2 each 14" & 18" Pipe Wrenches * 1 each Torpedo Level * 1 each 2' Level * 1 each Chalk Box * 1 set Box Wrenches up to 1 ¼" * 1 each Channel Lock Pliers * 1 set Allen Wrenches * 1 each Wrap Around * 1 each 25' & 50' Tape Measure * 1 each Hammer * 1 each Hack Saw and Blade * 1 each Tri-Square * 1 each Plumb Bob * 1 each Framing Square * 1 each Burning Glasses * 1 each Center Punch * 1 each Tubing Cutter * 1 each Pipe Fitters Book and Calculator * Must be at least 18 years of age * Must be able to lift 50 pounds, climb, bend, twist, stand and reach repetitively * Work in hot/cold/damp/cramped environments * 40 or more hours per week with possible weekend work * Background check and drug screen based on job location/requirements Benefits * We strive to provide a competitive compensation and benefits package. This includes but is not limited to medical, dental, vision, life insurance, 401(k), wellness programs and career development. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Accessibility: If you need an accommodation as part of the employment process please contact Human Resources at Phone: ************** Email: *********************************** Equal Opportunity Employer, including disabled and veterans. If you want to view the Know Your Rights: Workplace Discrimination is Illegal poster, please choose your language: English - Spanish - Arabic - Chinese English - Spanish - Chinese If you want to view the Pay Transparency Policy Statement, please click the link: English To see other positions, click here.

The Hiller Companies, LLC has an immediate opening for Fire Sprinkler Fitter. If you are a dedicated professional with a passion for fire protection and safety, we invite you to apply today. The Hiller Companies is a leading provider of fire protection and safety solutions, dedicated to safeguarding lives and property all around the world. Headquartered in Mobile, Alabama, Hiller extends its reach globally as well as in domestic markets with offices across the United States. With over 100 years in the industry, our mission is to ensure the highest standards of safety and innovation in comprehensive fire protection services, including installation, inspection, maintenance, and repair of critical fire and life safety equipment. Our team remains laser-focused on one goal - making the world a safer place. Job Summary: A Fire Sprinkler Fitter is responsible for installing, modifying, and repairing fire sprinkler systems. Fire Sprinkler Fitters will be responsible for fitting, fabricating, and installing sprinkler pipes and related components, ensuring that all work is completed according to the applicable codes and standards Key Responsibilities: * Install overhead sprinkler piping, standpipe systems, sprinkler system risers, and specialty fire protection systems including wet, dry, pre-action, and deluge systems. * Assemble and install various system components including hangers, valves, fittings, backflow prevention, bells, drains, fire pump and stored water supply, and other components of fire sprinkler systems according to design plans. * Interpret blueprints, drawings, and specifications to determine the layout and installation requirements of fire sprinkler systems. * Measure and cut piping materials, such as steel, copper, and CPVC, to specified lengths and dimensions using cutting tools and equipment. * Collaborate with other construction trades, such as plumbers, electricians, and HVAC technicians, to coordinate installation activities and ensure compatibility with other building systems. * Test and inspect newly installed fire sprinkler systems to verify proper operation and compliance with design specifications and regulatory requirements. * Attend scheduled in-house meetings/training and contribute recommendations for improvement. * Assist in the development and training of fire sprinkler apprentices, in good installation procedures in order to create and maintain a high degree of professionalism and safety practices. * Provide technical consultation and support to company apprentices, technicians, designers and shop employees. * Respond to other duties/responsibilities that are assigned by the Superintendent and Project Foreman * Maintain a clean and organized work environment, always adhering to safety guidelines, protocols, and procedures.

Embark on a rewarding career with Fire Safety and Protection (FSP)! FSP's rich multi-decade history is built on lasting customer relationships and continued high-quality service. We are proud to offer a full suite of life safety solutions across the U.S. and Canada. Our certified technicians deliver code-compliant fire safety solutions tailored to our customers' needs. It's our goal to be the single source for our customers' inspection, maintenance, repair, design and installation of their fire and security systems. With continuous training in the latest technologies and regulations, our customers trust us for high-quality workmanship that keeps their building systems in optimal condition for ongoing safety. We are military friendly! At FSP, we believe military veterans bring unmatched dedication, discipline, and a strong sense of purpose-qualities that align perfectly with our mission to protect lives and property through high-quality fire and life safety services. Our team values leadership, precision, and teamwork-making FSP a natural next step for those who have served. FSP accepts technical certification credit for military experience in relevant fields. Learn more here. Apply today and become part of a company where your skills and dedication are valued. Job Description: The basic function of the Sprinkler Helper will be to work with and learn from the Sprinkler Fitter on the installation and service of fire suppression and maintenance of safety systems. Our ideal candidate will have a strong desire to learn and grow, be customer and safety focused, and be able to work diligently as part of a team. Responsibilities: Assist Fitter on install and service jobs, traveling to job sites as required by the specific assignment. Interact with customers on a daily basis Follow Safety rules and requirements Other duties may be required. Minimum Requirements: Minimum 0-1 year of experience. Excellent administrative, organizational and computer skills. Good mechanical aptitude. Ability to adapt to changing needs and provide excellent customer service. Ability to communicate effectively both verbally and written Ability to transport equipment and tools weighing up to 40 lbs. Valid Driver's License with clean driving record and no DUI convictions Physical Requirements: Capable of performing physical labor to include carrying and moving equipment and tools weighing up to 70 lbs. Able to work in unusual and sometimes difficult positions such as climbing ladders, scaffolding and high lift equipment up to 60 feet, working within ducts, crawl spaces, above ceilings, etc. Read and understand construction blueprints, diagrams, and specifications used in installation activities Ability to work flexible hours. Benefits: Fire Safety and Protection (FSP) provides comprehensive benefits to ensure the wellbeing of our employees: Company paid benefits: Life/AD&D Long Term Disability Employee Assistance Program Paid Time Off (PTO) 7 Paid Holidays, and 1 floating holiday (employee choice) Paid jury duty and bereavement leave Voluntary Health Benefits: Medical, Dental, Vision Voluntary Life/AD&D Voluntary Short-Term Disability Supplemental Benefits: Voluntary Accident, Voluntary Critical Illness Legal Services HSA / Health Care and Dependent Care FSA Plans Benefits: Fire Safety and Protection (FSP) provides comprehensive benefits to ensure the wellbeing of our employees: Company paid benefits: Life/AD&D Long Term Disability Employee Assistance Program Paid Time Off (PTO) 7 Paid Holidays, and 1 floating holiday (employee choice) Paid jury duty and bereavement leave Voluntary Health Benefits: Medical, Dental, Vision Voluntary Life/AD&D Voluntary Short-Term Disability Supplemental Benefits: Voluntary Accident, Voluntary Critical Illness Legal Services HSA / Health Care and Dependent Care FSA Plans Why FSP? Supportive Culture: We value our employees and provide ongoing training. Career Growth: Advance your career with guidance from industry experts as well as tuition reimbursement and pay incentives. Broad Opportunities: With offices in the eastern U.S. and Canada, we offer diverse locations and roles. Client-Centered: We serve commercial property owners and facility managers with dedication and care. Rapid Growth: Join us as we expand and invest in new markets. Professional Development: FSP is committed to providing opportunities for employee career advancement within the Fire and Life Safety Industry. As part of this commitment, FSP offers various program sponsorships that reimburse employees for the costs of study materials and certification testing and provides tiered pay increases upon achievement of certification. Health & Safety: The personal safety and health of each employee of our organization is of primary importance. We believe that our employees are our most important assets and that their safety is our greatest responsibility. It is Fire Safety and Protection, LLC's objective to ensure a safe and productive working environment for all employees. At FSP we believe that illnesses and injuries can and must be prevented. We believe in empowering each employee to create and maintain a safe and healthy environment. FSP Equal Opportunity Employer Statement: We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Must be able to pass a background check. Tentative Work Schedule: Monday - Saturday 7AM-5:30PM Job Duration - 6 months (approximately) Job On-Site Start Date - December 29, 2025 Looking for an ambitious, hardworking individual to join the team. * Manually moving freight, stock, or other materials and performing other general labor as instructed. * Follow instructions from construction project managers and foreman * Cleaning the construction site by removing hazards, materials and debris from the worksite. * Loading materials from trucks through the loading docks using hand trucks and other freight moving equipment. * Must be able to tolerate extreme heat and extreme cold . * Must be able to lift 50 lbs above shoulder height on a regular basis as well the ability to bend, stoop, squat, walk, climb, and stand for 4 or more hours consecutively with or without accommodations. * May be required to wear personal protective equipment including but not limited to hard hats, gloves, protective eye wear, fire retardant clothing. * Must be able to read and communicate in English to understand technical documents, safety procedures, and instructions relevant to job duties. English proficiency is required due to operational and safety communication needs. * Other duties as assigned Proof of home address will be required in order to qualify for per diem. Job Type: Full-time Benefits Include: Craft Retention Bonuses BCBS Health Insurance Dental & Vision Insurance Short Term Disability Paid Time Off 401k with employer matching CSFCO is an Equal Opportunity Employer. We do not discriminate based on race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age (40 or older), disability, genetic information, veteran status, or any other protected status under applicable federal, state, or local laws.

**Start a Recession-Proof Trade Career in Fire Protection!** Impact Fire offers an opportunity to come in on the ground floor and learn the fire protection trade. Impact Fire is seeking hard-working Helpers to work alongside our experienced fire protection technicians. Get an aggressive start to a successful career, not just a job! Experienced tradesman can make over six figures! Learn **_who we are and what we do! (******************************************* Learn **_why we promote from within!_** **Why work with us?** At Impact Fire, we are a group of hardworking, dedicated fire protection professionals committed to protecting lives and property from fire. Our cohesive team spirit and customer service-oriented culture are expressed in all that we do. We operate with the belief that every team member plays a critical role in our success. We operate in 30+ district office locations across the United States, supporting industries ranging from retail and healthcare to education and restaurants. **Please text "ImpactFire" to ************ to connect with Ember, Impact Fire's Recruiting Assistant, to learn more about this position and the company.** **Essential Job Functions:** + Install, test, and service fire sprinkler systems + Cut and thread pipe and manage material + Assist in the installation of valves, couplings, and other fittings + Perform minor maintenance or cleaning of tools and equipment + Learn construction project skills, including reading blue prints **Qualifications:** + Basic mechanical and math skills + Must exhibit the initiative to learn the skills of the trade + Ability to work independently with limited supervision **When you join Impact Fire you will receive:** + Competitive compensation + Pay is on a weekly cycle, every Friday + Career Advancement Opportunities + Competitive benefits, including healthcare, dental, vision, life insurance, paid time off and holidays + Company paid short and long-term disability + Immediately vested in our 401(k) company match + Exceptional guidance and support from our managers + Collaborative culture & environment + Robust training opportunities with company reimbursement upon achieving required licensing + Apprenticeship programs for fire sprinkler, fire alarm and inspection positions + Opportunity to work alongside some of the best talent in the fire protection industry Successful completion of a drug test and pre-employment background screening is required. MVR checks are required for all driving positions. We look forward to talking with you about career opportunities with Impact Fire Services. For consideration, please apply on-line. Employment with an Equal Opportunity Employer (EOE) including disability/veterans. . **Job Details** **Pay Type** **Hourly**

The Mechanic Helper will assist and support the Lead Mechanics in performing maintenance and repairs on vehicles and equipment. Mechanic Helper duties and responsibilities Mechanic Helpers collaborate with other repair team members to ensure a vehicle is safely and efficiently operating to the driver's needs. Helps lead mechanic perform maintenance and repairs such as tune-ups and oil changes, checks tires and brakes, replaces spark plugs and engages in other similar tasks. Assists mechanic with electrical systems such as replacing batteries, starters, and lights. Test drives vehicles to ensure repairs are completed property. Assists in rotating tires and flushing and replacing fluids Assists in the repair and replacement of automotive parts including belts and tubes that have worn out. Learns about methods for diagnosing vehicle and equipment performance issues and work with diagnostic tools and provide reports and data to the lead mechanic to assist with repairs. Maintains work spaces and promote safety by cleaning work areas and removing hazardous materials such as oil, gasoline, or other fluids Follows established procedures for safe disposal of motor oil, tires, and other vehicle fluids. Maintains inventory of replacement parts and equipment. Inspects tools and equipment to ensure they are in working order and returns tools to proper location. Updates maintenance and repair logs for vehicles. Performs other related duties as assigned. Mechanic Helper skills and qualifications Mechanic Helpers use a variety of technical and soft skills to provide the most comprehensive repair solutions they can, including: Knowledge of vehicle diagnostic and repair. Excellent mechanical skills. Ability to follow instructions and work in a team setting and coordinate their activities with other mechanics. Ability to use power and hand tools. Excellent analytical and problem-solving skills. Ability to read service and repair manuals. Ability to complete assigned tasks in a timely fashion. Basic knowledge of computer systems and other relevant electronics A valid driver's license Good interpersonal skills Effective collaboration and communication skills Job Type: Full-time Pay: $17.00 - $19.00 per hour Expected hours: 40 per week Benefits: 401(k) 401(k) matching Dental insurance Health insurance Life insurance Paid time off Vision insurance Schedule: 8 hour shift Monday to Friday Experience: Mechanic Helper: 1 year (Required) Mechanical knowledge: 1 year (Required) License/Certification: Driver's License (Required) Work Location: In person Compensation: $17.00 - $20.00 per hour