Helper jobs in Port Arthur, TX

Job Description Raba Kistner, Inc. is a premier Engineering Consulting and Program Management firm. Our purpose is to build a better and more sustainable world for our employees, their families, our clients, and the communities we serve. Our Core Values are: Community "We care for our communities" Integrity "We act with integrity" Passion "We infuse passion into everything we do" Quality "We believe quality comes from a culture of innovation and continuous improvement" Growth "We dedicate ourselves to personal and business growth" Raba Kistner is seeking an enthusiastic Geotechnical Driller Helper to join our team in Beaumont, TX. Responsibilities will be to provide support, operation, and maintenance of exploration equipment, support vehicles and other equipment in the drilling fleet. Assist in operating exploration equipment, field logging collection of geotechnical samples, and provide drilling sample information. Assists driller in preparing drilling equipment and supplies for jobs. Drives assigned equipment to drill sites. Assists, as required, to complete drilling job assignments. Assists in collecting logging supplies required for each job. Prepares legible, accurate, and detailed logs for each boring drilled. Packages samples for transportation to laboratory. Turns in field notes, logs, and boring location map upon their completion. Informs drilling supervisor of worn or broken drill tools and when drilling and logging supplies are in low supply and should be reordered. Clean equipment and drilling fleet. Assists driller and project engineer as required. Perform other duties as assigned. Qualifications High school diploma or (General Education Development) GED. Posses a current valid state issued driver's license and meet company's auto insurability requirements. Class B CDL driver's license or ability to obtain Class B CDL within 90 days of employment preferred Good oral and written communication skills including the ability to write short correspondences, notes, letters and memos. Ability to read and understand instructions, labels, reports, etc. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals and the ability to compute rate, ratio, and percent and to prepare and interpret bar graphs. Intermediate Microsoft Office (Word, Excel, and Outlook). Must be safety minded and willing to put safety first in performing all duties. The following physical activities described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. While performing the functions of this job, the employee is occasionally required to sit, frequently required to stoop, kneel crouch or crawl, regularly required to stand, walk, climb, balance, and talk. Continuously required to use hands and reach. Regularly required to lift/move up to 50 pounds. Specific vision abilities required by this job include close vision, far vision, color vision, peripheral vision, focus vision, depth vision. Work environment includes potential exposure to movement of heavy equipment on construction or roadway sites; potential exposure to hazardous dangerous chemicals and solvents, noise, dust, fumes, grease and oils, radiant and electrical energy, and vibration; all of which would require employee to follow implement and follow proper safety procedures and utilize appropriate protective equipment. Regular use of non-complex machines and equipment. Work assignments are frequently performed outside in all weather conditions. This position may require protracted or irregular hours. Flexibility to work irregular hours is necessary due to client needs. EOE/Disabled/Veteran Drug Free Workplace

Pipefitter Helper - CAM00Z0Company: WorleyPrimary Location: USA-LA-CameronJob: PipefitterSchedule: Full-time Employment Type: EmployeeManagement Level: Individual ContributorInternational Transfer Opportunity: NoJob Posting: Dec 12, 2025, 8:34:38 PMUnposting Date: Jan 12, 2026, 5:59:00 AMContact Name - Internal: Natalie Michelle PresleyReporting Manager Title: Area Construction Manager Building on our past. Ready for the future Worley is a global professional services company of energy, chemicals and resources experts.We partner with our customers to deliver projects and create value over the life of their assets.We're bridging two worlds, moving towards more sustainable energy sources, while helping to provide the energy, chemicals and resources needed now Responsible for executing helper duties to assist assigned crew. Primary ResponsibilitiesRead blueprints and specification to determine the scope of work: location, quantities, and sizes of materials required Lay out, position, align, and fit together fabricated parts of structural metal products Set up face block, jigs, and fixtures Locate and mark centerlines and reference points onto floor or face block and transpose them to work piece, using tape, chains, plumb bob, and squares Position or tighten braces, jacks, clamps, ropes, or bolt straps of bolt parts in positions for welding or riveting Additional responsibilities not listed may be required Qualifications Minimum 2 years industrial construction/maintenance industry experience Physical Requirements Climbing, Balancing, Stooping, Kneeling, Crouching, Crawling, Reaching, Standing, Walking, Pushing, Pulling, Lifting, Grasping, Feeling, Repetitive Motions Moving forward together We're committed to building a diverse, inclusive and respectful workplace where everyone feels they belong, can bring themselves, and are heard. We provide equal employment opportunities to all qualified applicants and employees without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by law. We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard. And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here. And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change. Recruitment fraud notice Worley has been notified of fraudulent employment inquiries and/or offers being made to prospective candidates. These activities have generally occurred via email but may occur by other means. Generally prospective candidates are being asked to provide detailed personal information and possibly being asked to pay application fees. Worley does NOT require any payment or fees from prospective candidates. Do not provide any personal/financial information whatsoever, and do not make any payments requested by any email or other communication requesting such data to secure employment with Worley or any of its subsidiaries. If you receive such a message, you are advised to contact your local law enforcement agency and provide any details you may have. If you are interested in employment with Worley, please view the career information on our website and follow application instructions for career opportunities for which you are qualified.

1. Communicates with Pipefitters and others to perform the job tasks. 2. Manipulates and generally understands the use of different types of power and manual pipefitting layout and construction tools. 3. Assists with installation, maintenance and testing of process piping and utility systems. 4. Cuts, grinds and assembles pipes, using hacksaw, pipe cutters, hammer and wedge, cutting torch and pipe cutting machine. 5. Threads pipe using a threading machine. 6. Mounts pipe hangers and supports from structural steel to hold pipe. 7. Assembles and installs a variety of metal and nonmetal pipe and pipe fittings including those made of brass, ferrous and non-ferrous metals and plastics. 8. Joins piping by means of threaded or cemented joints. 9. Secures pipe to structure with clamps, brackets, and hangers, using hand tools. 10. Unloads materials, tools, equipment, and supplies. 11. May assist in lifting, positioning, and securing of materials and work pieces during installation. 12. Cleans and performs maintenance activities on tools and equipment. 13. Maintains a clean and safe work environment. 14. Must be able to safely traverse uneven terrain with tools and building materials. 15. Must be able to climb vertical ladders and work above ground as necessary. 16. Performs a variety of tasks involving safe dexterous use of hand tools. 17. Safely operates power tools and equipment. 18. Adheres to all safety procedures. 19. Understand the use of all types of personal fall arrest systems. 20. Able to assess scaffold. 21. Typically requires a minimum of 6 months of industrial construction experience. **Auto req ID:** 23757BR **Project Name:** Port Arthur LNG **Location:** Port Arthur, Texas **Shift:** Night Shift Bechtel is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity and expression, age, national origin, disability, citizenship status (except as authorized by law), protected veteran status, genetic information, and any other characteristic protected by federal, state or local law. Applicants with a disability, who require a reasonable accommodation for any part of the application or hiring process, may e-mail their request to ******************** or call *************** for assistance. Determinations on request for reasonable accommodation will be made on a case-by-case basis.

Richard Construction Inc. (RCI) is currently seeking experienced Industrial Multi-Craft Helpers. An Industrial Helper-Multicraft will assist skilled craft workers in performing their assigned duties. Will work with other crafts at levels appropriate to employee's training and skills as requested by supervisor. Must have ability to take direction from higher skilled workers or foremen. Helpers will assist with various manual needs of the construction work being performed including but not limited to moving equipment or materials, digging, retrieving equipment or materials, and any other miscellaneous support work instructed by a supervisor or a journeyman craft. RCI has various levels of Helper positions based on experience and skills ranked as follows: * Helper - Multi-Craft: Performs all duties listed above. * Helper I: Same as "Multi-Craft Helper" but with 95% ability or greater. * Helper II: Same as "Multi-craft Helper" but with 90% ability or greater. * Helper III: Same as "Multi-Craft Helper" but with 85% ability or greater Qualification Highlights: * Must be able to meet all physical demands - see below * Must have experience using industrial hand tools and power tools * Must be able to regularly and reliably show up at the assigned job site * Must meet all safety and security requirements at the job site Position Responsibilities: * Position may perform a large range of manual activities including but not limited to moving equipment or materials, digging, retrieving equipment or materials, etc. * Climb onto structures or scaffolding as required in support of construction needs * Uses rigging and hosting devices such as chokers, chain falls, and come-alongs to move equipment/materials into place * Conducts preventive maintenance such as lubrication and fixing or repairing worn parts * Follows directions from supervisor Required Qualifications: * Basic knowledge of hand tools and power tools * Good problem-solving abilities * Good aptitude and manual dexterity * Good reading comprehension * Ability to work with others - Team player * Good communication skills with co-workers and supervisors * Commitment to Richard values, safety rules, and regulations Preferred Qualifications: * Richard Construction Inc. (RCI) former employee from a Reduction of Force (ROF) * Former RCI employee * Basic mechanical knowledge * Experience on an industrial construction site * Formal/Technical education Candidate Possession of Required Tools: * Safety Toed Boots Physical Requirements: * Employee will be required to adhere to large amounts of standing, walking, bending, squatting, and lifting * Will talk and hear in order to communicate effectively * Must have good dexterity with hands and fingers to perform the precision adjustments of tools, machinery parts and controls * Able to use arms and hands to signal, grad, hold, turn, and push or pull objects such as materials, controls, and tools * Will be required to lift, carry and move objects up to 50 lbs in weight * Will occasionally work at heights, climb ladders and stairways, and work off platforms * Capable of working at heights up to 300 feet utilizing proper fall protection devices * Will use vision abilities to focus, see short distances, see colors, possess depth perception and peripheral vision * Must be capable or working outdoors in the elements including but not limited to the heat, cold, rain, snow, and wind * Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, earplugs/muffs, safety vests, gloves, steel toe/safety toe boots, and masks/respirators RCI is dedicated in providing a SAFE and Drug Free environment. RCI is an Equal Opportunity Employer (EEO). Accessibility: If you need an accommodation as part of the employment process please contact Human Resources at Email: ***************************** Equal Opportunity Employer, including disabled and veterans. Please select this link to view:

The Pipefitter Helper provides support to pipefitters by assisting in the installation, repair, and maintenance of piping systems. This entry-level role is critical for maintaining efficient workflow, preparing materials, and ensuring a safe work environment. Responsibilities: Assist pipefitters in assembling, installing, and repairing piping systems. Prepare and stage piping materials, tools, and equipment for jobs. Measure, cut, thread, and mark pipe under supervision. Perform general labor and support tasks assigned. Carry, move, and position pipe and components as directed. Assist with welding, grinding, and other related tasks under supervision (as qualified). Maintain tools, equipment, and work areas in clean, organized, and safe conditions. Follow all safety protocols and company policies. Report unsafe conditions, damaged materials, or missing tools to supervision. May assist in lifting, positioning and securing our materials and work pieces during installation. May be responsible for routine maintenance or repairs. Performs minor maintenance or cleaning activities on tools and equipment. Rely on instructions and pre-established guidelines to perform the functions of the job. Works under minimum supervision. Has knowledge of commonly used concepts, practices, and procedures within a particular field. Education and Experience: High school diploma or equivalent and previous experience. Entry-level; prior construction, industrial, or mechanical experience preferred. Ability to follow instructions, read blueprints, and use basic measuring tools. Strong work ethic and willingness to learn pipefitting skills. Comfortable working at heights, in confined spaces, and in varying weather conditions. Physical Requirements: Ability to reach, stand, walk, finger, grasp, feel, talk, hear, see and to perform repetitive motions. Sedentary work: Exerting up to 10 lbs. of force occasionally and/or a negligible amount of force frequently or constantly to lift, carry, push, pull or otherwise move objects, including the human body. Sedentary work involves sitting most of the time. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

Your Job The jobsite located in Vidor, TX has an opening for a Pipefitter Helper. Our Team Optimized Process Designs, LLC (OPD) is an engineering/construction company headquartered in Katy, TX with an expertise in the natural gas, natural gas liquids, and petrochemical industries. OPD is part of the larger Koch Engineered Solutions (KES) organization which provides a variety of capabilities across many industries. Originally incorporated in 1980, OPD has developed a strong reputation for honesty, integrity, and ability to successfully execute projects. OPD has a key advantage in being able to supply construction services as well as engineering/procurement. This enables clients to have a ''one stop shop'' for the overall project, providing increased efficiency and avoiding potential interface problems. OPD's industry experience, flexibility, and personal attention have made us a preferred partner to our customers and our tight knit, highly productive, team atmosphere makes OPD a great place to work. What You Will Do Some core responsibilities for a Pipefitter Helper include: Assisting pipefitter with setting, assembling, and installing pipe. Possess knowledge of pipe fittings, bolts, valves, etc, as required. Prepare pipe and fittings for hoisting and rigging Being familiar with different types of metals Locate and mark bending and cutting lines of the metal. Clean work area and restock supplies and materials as necessary Operate tools and equipment including: beveling machines, cut-off grinders, hammers, torches, magnetic drills, welding machines, and a Saw-Zall. Ability to work safely and accurately. We expect all field employees to: Actively participate in a strong safety culture Recognize safety hazards and risks Participate in onsite safety meetings Follow OPD and client safety policies and procedures Be aware of changing conditions on an active jobsite Be on time to the jobsite each day ready for work Display a positive attitude and be able to work in a team environment High attention to detail to avoid reworks and errors Some physical demands of being a pipefitter helper include: Capable of working in outdoor weather and environmental conditions including extreme heat and humidity, extreme cold, and high elevations. Lifting and carrying awkward objects up to 60 lbs Standing for extended periods of time up to 12 hours per day. Moving the entire body. Considerable use of arms, legs, climbing, lifting, balancing, walking, stooping, crawling, twisting, reaching, and bending on a regular basis. Must be able to work on elevated platforms and maintain balance when stepping on narrow platforms such as beams and pipes. Must be able to perform these activities while wearing an approved full-body harness and lanyard. Use hands to handle, control, and feel objects and/or tools. Who You Are (Basic Qualifications) 6 months previous experience working in an industrial environment Past exposure to different metals and knowledge of pipe fittings, bolts, valves, etc. Other Job Requirements: Travel is a must with extended periods away from home in remote areas at times. Must be willing and able to work shifts up to 12 hours per day and 7 days per week. Must be willing and able to meet all physical demands of the job. Must be able and willing to attend mandatory safety meetings. What Will Put You Ahead 6+ months working as a pipefitter helper Previous experience reading ISO's and drawings Past exposure to different metals and knowledge of pipe fittings, bolts, valves, etc. Experience in a gas plant construction environment At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate's knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy. Hiring Philosophy All Koch companies value diversity of thought, perspectives, aptitudes, experiences, and backgrounds. We are Military Ready and Second Chance employers. Learn more about our hiring philosophy here. Who We Are As a Koch Engineered Solutions company, Optimized Process Designs (OPD) provides clients with detailed engineering packages in all disciplines, single-point procurement for all equipment and materials, fabrication and direct-hired construction services throughout the United States. We leverage in-house capabilities and provide services with faster speed to market to help deliver increased cost savings while minimizing risk. At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company. Our Benefits Our goal is for each employee, and their families, to live fulfilling and healthy lives. We provide essential resources and support to build and maintain physical, financial, and emotional strength - focusing on overall wellbeing so you can focus on what matters most. Our benefits plan includes - Medical and Employee Assistance Program (EAP). Specific eligibility criteria is set by the applicable Summary Plan Description, policy or guideline and benefits may vary by geographic region. If you have questions on what benefits apply to you, please speak to your recruiter. Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results. Equal Opportunities Equal Opportunity Employer, including disability and protected veteran status. Except where prohibited by state law, some offers of employment are conditioned upon successfully passing a drug test. This employer uses E-Verify. Please click here for additional information. (For Illinois E-Verify information click here, aquí, or tu).

Graywolf is seeking Pipe Helpers at our Port Sulphur, LA project site Graywolf is a heavy industrial/commercial construction contractor that provides end-to-end solutions from design, fabrication, construction, and facility management with a footprint that is nationwide. With more than 45-years of experience in the industry, we have strong leadership and support teams who understand field servant leadership is the key to our success. We are continually BUILDING new talent while developing our current talent. As our assignments vary in duration and locations, we provide a safe and ethical environment and offer a competitive wage and benefit program. We strive to be the best contractor with demonstrating a culture of Safety, Quality and Performance to deliver the best completed projects to our customers. Summary: A helper assists journeyman level craft by performing support tasks on construction projects such as erecting, wrecking, repairing, maintaining equipment and performing janitorial functions. Essential Duties Safety - work safely around the hazards associated with the Construction field. Tools - use hand, electric, pneumatic and hydraulic tools and in a safe manner. Construction Math - Demonstrates a basic level of competency in construction math as required in trade practice. Rigging Equipment - Safely and competently identify and use basic rigging procedures and equipment including chain hoists, come-along, jacks and tuggers. Dig, spread and level dirt and gravel using a pick and shovel. Lift, carry and hold building materials and supplies Clean tools, equipment, materials and work areas, including sweeping, mopping and other general clean-up activities. Join, wrap, align and seal sections of pipe. Assemble sections of dredge pipeline. Measure distance from grade stakes and drive stakes Stretch tight line Bolt, nail, align and block up under forms. Signal operators of construction equipment to facilitate alignment, movement and adjustment of machinery to conform to grade specifications. Mop, brush or spread paints or bituminous compounds over surfaces for protection. Spray materials such as water, sand, steam, vinyl, paint or stucco through hose to clean, coat or seal surfaces. Grind, sand or polish surfaces using abrasive tools or machines. Demolish buildings, saw lumber, dismantle forms, remove objects from concrete, mount hangars and cut and attach insulating material. Work within precise limits and standards of accuracy. Follow oral and written directions. Work within company policies (including Safety and Human Resources policies), client policy and OSHA safety requirements. Perform other duties as assigned by the supervisor as needed. Qualifications: At least 6-months experience as a Helper level construction worker in particular trade for entry level helper At least 2-years experience as a Helper level construction worker in particular trade for a top level helper Must be able to successfully complete all required pre-hire requirements. Physical/Site Requirements: Lift and carry heavy items weighing up to 45 pounds. Move in and around confined and cluttered places, and uneven areas. Full range of motion and flexibility consistent with age. Work up to a 12-hour shift in varying temperature extremes and other outside conditions. Climb and maintain balance on steel framework, stairs, ladders, and scaffolds. Work at heights with fall protection, work from manlifts, baskets, JLG's etc. PPE footwear/prescription safety glasses or eye shields required. Graywolf Integrated Construction Company is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law.

A laborer will assist with various manual needs of the construction work including but not limited to moving equipment, digging, retrieving equipment, standing by for fire safety and any other work instructed by a supervisor or journeyman. Qualification Highlights * Must be able to meet all physical demands - see below. * Must have experience using industrial hand tools and power tools. * Must have reliable transportation and be able to work 7 days as needed. Position Responsibilities * Position may perform a large range of manual activities including but not limited to moving equipment, digging, retrieving equipment, standing by for fire safety, and any other work instructed by a supervisor or a journeyman. * Use fire extinguisher. * Climb on to structures and Scaffolding. * Uses rigging and hoisting devices such as chokers, chain falls and come along to move equipment / materials into place. * Conducts preventative maintenance such as lubrication and fixing or repairing worn parts. * Follows direction from supervisor. JOB REQUIREMENTS Required Knowledge, Skills, and Abilities * Basic knowledge of hand tools and power tools. * Good problem-solving abilities * Good aptitude and manual dexterity * Good reading comprehension * Ability to work with others - team player. * Good communication skills with co-workers and supervisors * Commitment to Zachry values and safety rules and regulations Preferred Qualifications * Zachry ROF'ed employee. * Former Zachry Employee. * Basic mechanical knowledge. * Experience on an industrial construction site Formal/technical education. Reporting to: This position does not have any direct reports. Physical Requirements * Employee will be required to adhere to large amounts of standing, walking, bending, squatting, sitting and lifting. * Will talk and hear to communicate. * Will use arms and hands to signal, grab, hold, turn, push, and pull: objects, materials, controls and tools. * May be required to pick up, lift, carry and move up to 50lbs. * Will work at heights, climb ladders and stairways, and may occasionally work off platforms/scaffolding using the appropriate fall protection requirements. * Must be able to work in all weather conditions (including heat, rain, cold and wind) while wearing appropriate PPE. * Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/spoggles, ear plugs, masks/respirators, hi-vis safety vests, leather gloves and leather steel-toed work boots. CERTIFICATIONS AND/OR LICENSES REQUIRED * * None OTHER POSITION OR SITE REQUIREMENTS OVER 21 YRS OLD, ACTIVE DL, Job Specific Requirements DOES THIS POSITION REQUIRE A COMPUTER? * No BACKGROUND CHECK * Yes REQUIREMENTS MEDICAL * * Drug Screen * Pre-Employment Physical * Pulmonary Function Test * Scott AV 3000 HT * Scott AV 2000 FF * 3M 6000 Half Face SAFETY/ORIENTATION/TRAINING * * Audio * Basic Plus * MVR * Scaffold User * Site Specific

A laborer will assist with various manual needs of the construction work including but not limited to moving equipment, digging, retrieving equipment, standing by for fire safety and any other work instructed by a supervisor or journeyman. Qualification Highlights Must be able to meet all physical demands - see below. Must have experience using industrial hand tools and power tools. Must have reliable transportation and be able to work 7 days as needed. Position Responsibilities Position may perform a large range of manual activities including but not limited to moving equipment, digging, retrieving equipment, standing by for fire safety, and any other work instructed by a supervisor or a journeyman. Use fire extinguisher. Climb on to structures and Scaffolding. Uses rigging and hoisting devices such as chokers, chain falls and come along to move equipment / materials into place. Conducts preventative maintenance such as lubrication and fixing or repairing worn parts. Follows direction from supervisor. JOB REQUIREMENTS Required Knowledge, Skills, and Abilities Basic knowledge of hand tools and power tools. Good problem-solving abilities Good aptitude and manual dexterity Good reading comprehension Ability to work with others - team player. Good communication skills with co-workers and supervisors Commitment to Zachry values and safety rules and regulations Preferred Qualifications Zachry ROF'ed employee. Former Zachry Employee. Basic mechanical knowledge. Experience on an industrial construction site Formal/technical education. Reporting to: This position does not have any direct reports. Physical Requirements Employee will be required to adhere to large amounts of standing, walking, bending, squatting, sitting and lifting. Will talk and hear to communicate. Will use arms and hands to signal, grab, hold, turn, push, and pull: objects, materials, controls and tools. May be required to pick up, lift, carry and move up to 50lbs. Will work at heights, climb ladders and stairways, and may occasionally work off platforms/scaffolding using the appropriate fall protection requirements. Must be able to work in all weather conditions (including heat, rain, cold and wind) while wearing appropriate PPE. Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/spoggles, ear plugs, masks/respirators, hi-vis safety vests, leather gloves and leather steel-toed work boots. CERTIFICATIONS AND/OR LICENSES REQUIRED * *None OTHER POSITION OR SITE REQUIREMENTS OVER 21 YRS OLD, ACTIVE DL, Job Specific Requirements DOES THIS POSITION REQUIRE A COMPUTER? * No BACKGROUND CHECK * Yes REQUIREMENTS MEDICAL * Drug Screen Pre-Employment Physical Pulmonary Function Test Scott AV 3000 HT Scott AV 2000 FF 3M 6000 Half Face SAFETY/ORIENTATION/TRAINING * Audio Basic Plus MVR Scaffold User Site Specific

Come Build Your Career at Aecon! As a Canadian leader in infrastructure development, Aecon is safely and sustainably building what matters for future generations to thrive! We lead some of the most impactful infrastructure projects of our generation, at the forefront of transformational change in transportation and energy, and partnering every day to build, connect, power, and strengthen our communities. At Aecon, you can count on: * Safety Always. Our number one core value. If we can't do it safely, we don't do it at all. * Integrity. We lead by example, with humility and courage. * Accountability. We're passionate about delivering on our commitments. * Inclusion. We provide equitable opportunities for everyone. We lead the infrastructure industry with purpose, and our people are at the heart of everything we do. So, we invest in our people, just like they invest in us! At Aecon we: * Ensure you and your family receive the services needed to support your mental, emotional, and physical well-being. * Believe in helping you build your career through our Aecon University and Leadership Programs. * Are committed to supporting and investing in inclusive work environments, through initiatives like Equity, Diversity & Inclusion training, our Aecon Women in Trades and Aecon Diversity in Trades programs, and our Employee Resource Groups (ERGs) to ensure we are building inclusion into every aspect of our culture at Aecon. * Are a leader in sustainable construction. With a strong commitment to operating responsibly by minimizing our impact on the environment and surrounding communities. Our business success relies on strong execution and continuous improvement - driven by the diversity, expertise and teamwork of our people. We're always searching the globe for innovative, collaborative minds to join our best-in-class Aecon community! What is the Opportunity? We are looking for dependable Labor Helpers to support our industrial work crews. This is a hands-on role ideal for individuals who are physically fit, safety-minded, and ready to work in a fast-paced construction or maintenance environment. No prior trade experience is required-just a strong work ethic and willingness to learn. What You'll Do Here: * Move tools, equipment, and materials to and from work areas. * Clean boilers, tanks, and work zones using scrapers, hoses, and other tools. * Assist with positioning and holding parts for welding, fitting, or assembly. * Attach cables, slings, or ropes to materials under direction. * Help pipefitters, welders, and other tradespeople with basic tasks. * Operate basic equipment (e.g., hand trucks, hoists) and fuel/lubricate machinery. * Perform general labor duties such as sweeping, lifting, and material handling. * Work in various environments including confined spaces, heights, and outdoor conditions. Aecon fosters diversity, inclusion and belonging within and across our organization. We welcome all to apply including, women, visible minorities, Indigenous peoples, persons with disabilities, and persons of any sexual orientation or gender identity. We are committed to adhering to the objectives and requirements outlined in the Accessible Canada Act (ACA), and to meeting the accessibility needs of persons with disabilities in a timely manner. Through the implementation of the requirements of the ACA and its applicable regulations, appropriate accommodations will be provided upon request throughout the interview and hiring process.

EEO Statement: Hat World, Inc., Lids Holdings, Inc., dba Lids and subsidiaries is an Equal Opportunity Employer and is committed to complying with all federal, state, and local EEO laws. Hat World, Inc., prohibits discrimination against employees and applicants for employment based on the individual's race or color, religion or creed, national origin, alienage or citizenship status, marital status, sex, pregnancy status, age, military status, disability, or any other protected characteristic or class protected by law. Hat World, Inc. provides reasonable accommodation for disabilities in accordance with applicable laws. Notice to Applicants: In connection with your application, we collect information that identifies, reasonably relates to or describes you ("Personal Information"). The categories of Personal Information that we collect include your name, government issued identification number(s), email address, mailing address, other contact information, emergency contact information, employment history, educational history, criminal record, and demographic information. We collect and use those categories of Personal Information about you for human resources and other business management purposes, including identifying and evaluating you as a candidate for potential or future employment or future contract positions, recordkeeping in relation to recruiting and hiring, conducting criminal background checks as permitted by law, conducting analytics, and ensuring compliance with applicable legal requirements and Company policies. Need accessibility assistance to apply? Applicants who require accessibility assistance to submit an employment application, please email us at **************************. A member of our Talent team will respond as soon as reasonably possible. This email address and is only for individuals seeking accommodation when applying for a career at Lids. Req ID: 26363 Location: 5239 - Parkdale Mall About Our Company General Position Summary Principle Duties and Responsibilities Providing excellent customer service by following LIDS Sports Group customer service programs. Meet or exceed Company Objectives in all individual sales goals. Participate in store maintenance per the current visual guidelines including: proper merchandising, signage and store cleanliness. Maintain a professional appearance consistent with Dress Code Policy. Additional Principal Duties and Responsibilities Protect Company assets within guidelines of LIDS Retail policies. Participate in restocking and resetting of merchandise. Support and adhere to all LIDS Retail policies, procedures and guidelines. Other duties as assigned. Job Required Knowledge & Skills Strong interpersonal skills and the ability to communicate verbally in a clear and professional manner. Ability to read and operate a computer. Ability to lift up to 50 pounds. Ability to climb a ladder and work with hands overhead. Standing required for up to 100% of the work time. Preferred Job Required Knowledge & Skills Seasonal Part Time Associates start at local minimum wage with up to 10% more based on experience. Exact compensation may vary based on skills, experience, and location. The seasonal duration of this position will conclude on January 6th. Education Reports To EEO Statement: Hat World, Inc., Lids Holdings, Inc., dba Lids and subsidiaries is an Equal Opportunity Employer and is committed to complying with all federal, state, and local EEO laws. Hat World, Inc., prohibits discrimination against employees and applicants for employment based on the individual's race or color, religion or creed, national origin, alienage or citizenship status, marital status, sex, pregnancy status, age, military status, disability, or any other protected characteristic or class protected by law. Hat World, Inc. provides reasonable accommodation for disabilities in accordance with applicable laws. Notice to Applicants: In connection with your application, we collect information that identifies, reasonably relates to or describes you ("Personal Information"). The categories of Personal Information that we collect include your name, government issued identification number(s), email address, mailing address, other contact information, emergency contact information, employment history, educational history, criminal record, and demographic information. We collect and use those categories of Personal Information about you for human resources and other business management purposes, including identifying and evaluating you as a candidate for potential or future employment or future contract positions, recordkeeping in relation to recruiting and hiring, conducting criminal background checks as permitted by law, conducting analytics, and ensuring compliance with applicable legal requirements and Company policies. Need accessibility assistance to apply? Applicants who require accessibility assistance to submit an employment application, please email us at **************************. A member of our Talent team will respond as soon as reasonably possible. This email address and is only for individuals seeking accommodation when applying for a career at Lids. Req ID: 26363 Location: 5239 - Parkdale Mall

Great new opportunity for a Rolling Mill Utility Helper! The role will report to the Rolling Mill Facilitator and Supervisor. Candidate will assist in all facets of the Rolling Mill and Finishing Mill as needed. Train and fill absences, temporary vacancies, and provide relief for Finishing Area Operators. Cleans scrap steel and debris from finishing areas and occasionally from the rolling area, operate remote control crane(s) as needed, perform miscellaneous duties in rolling and finishing as directed. Utilize computer terminals, manual rod cutters, hydraulic rod cutters, cutting torch, mill wrenches, sledge hammer, crane hook, shovel, forklift, scrap buckets, banding gun, broom, steam cleaners, etc. Detect and report faulty material, environmental hazards, and/or improper operation of plant equipment or machinery; refer questionable and unusual matters to proper supervision. Follow all safety regulations and practices The above statements are intended to describe the general nature and level of work being performed by people to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills of personnel so classified. Requirements 2 or more years of general labor experience within a construction, industrial or manufacturing environment. High school diploma or equivalent Able to keep a work area clean. Previous crane remote operating experience, preferred.. Willingness to work a flexible schedule. Wages & Benefits Optimus Steel has a competitive benefit package. Medical/Prescription Dental, Vision, Health & Dependent Care FSA 401K, Company match Basic Life/Accident Insurance Employee Assistance Program PM19 Salary Description $23.92 Per-hour

Skilled Laborer Reports To: Foreman Summary: Assembles rigging to lift and move equipment or material in manufacturing plant, shipyard, or on construction project by performing the following duties. Essential Qualifications, Duties, and Responsibilities: (Other duties may be assigned) Works with craft personnel and assist in removing scale, sand, paint, grease, tar, rust and dirt from equipment. Utilize shovels and other hand equipment to move products from one place to another as directed. Utilize mops and brooms to clean areas of work free of clutter and environmentally friendly. Inspect tools for safe usage prior to delivering and/or removing tools from work locations. Ensures that a proper inventory of equipment is readily available in trucks, trailers or other tool storage areas. Control movement of heavy equipment through narrow openings or confined spaces, by the use of tag lines. Signal or verbally direct workers engaged in hoisting and moving loads in order to ensure safety of workers, equipment and materials. Assist in the loading, unloading and securing of loads for transportation. Dismantle and store rigging equipment out of environmental elements after each use. Must have prior experience working in the pipeline industry. Physical Demands: The employee must regularly lift up to 50 pounds and carry up to 25 pounds. Specific vision abilities required by this job include Close vision, Distance vision, Peripheral vision, Depth perception and Ability to adjust focus. While performing the duties of this Job, the employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is frequently required to stand; walk; climb or balance and stoop, kneel, crouch, or crawl. Skilled Laborers must be willing to comply with PCM Health, Safety, and Environmental rules and regulations. They must also comply with all governmental regulations. The above description covers some of the principal duties and responsibilities of the job. The description shall not however, be constructed as a complete listing of all miscellaneous, incidental or similar duties which may be required from day to day. I have read and understand all the duties and requirements listed above.

**Requisition ID: 177054** Assist skilled craftsperson(s) by performing supportive duties as directed and will work under immediate supervision. The level and degree of job responsibilities and requirements vary depending on months of experience and assigned job step. **Experience Level** Entry **Primary Responsibilities and Duties** - Learn to reads and interprets blue prints, instructions, and other documentation or plan work activities. - Moves materials and equipment to work locations and sets up work site. - Cover, seal, or finish insulated surfaces or access holes with plastic covers, canvas strips, sealants, tape, cement or asphalt mastic. - Learn to fit insulation around obstructions, and shape insulating materials and protective coverings as required. - Install sheet metal around insulated pipes to protect the insulation from weather conditions or physical damage. - Covers or seals insulation with preformed plastic covers, canvas strips, sealant, or tape to secure insulation to structure, according to type of insulation used and structure covered, using staple gun, trowel, paintbrush, or caulking gun. - Follows all hazardous waste handling guidelines. **Qualifications** - May require a high school diploma or its equivalent with previous years of experience in the field or in a related area. - Must possess knowledge skills and abilities for position - Ability to understand, follow and transmit written and oral instructions and communicate effectively with management/supervision - Field experience in chosen craft discipline - Knowledge of the safe and efficient use of hand tools, power tools and layout tools. **Requirements** - Able to meet all physical requirements. - Must have all required tools - Expected to climb and work at heights and in confined spaces (may exceed 200 ft) - Able to work outdoors in all weather conditions - Able to work overtime, nights, and weekends as required by the workload - Observe and comply with all safety and project rules. Performs other duties as required. Equal Opportunity Employer, including disability and protected veteran status. Company: TIC_Craft

Essential Job Functions: Performs skilled tasks involved in the fabrication, installation, maintenance and repair of traffic control devices, including signs, pavement marking, and/or freeway lighting; maintains and services all sign equipment, vehicles and work areas; operates power tools including jack hammers, pipe wrenches, mauls, and/or saws. Other Job Functions: Light maintenance; cleans tools; washes vehicles. Performs other duties as required. Job description statements are intended to describe the general nature and level of work being performed by employees assigned to this job title. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required. This position requires 100% on-site work. Works inside and outside in all types of weather including extreme cold, heat and temperature swings; is exposed to traffic noise, fumes/odors, gas vapors, insect bites, mechanical/electrical and explosive hazards. Possibility of physical injury due to working around excavation holes and trenches. Works Monday through Friday, 7:00 a.m. - 3:30 p.m. May be required to work additional hours during emergencies, standby duty and other miscellaneous events. Knowledge: Some knowledge of traffic signs, pavement markings, and/or construction work zones including fabrication, installation, maintenance, repair. Skills/Abilities: Skilled in the use of light to medium power equipment and small hand tools as listed above; ability to perform manual labor for extended periods of time and during unfavorable weather conditions. Physical Requirements: Constantly sees and hears; frequently lifts, drags, pulls, pushes and crawls; may work in heights up to 35 feet. Education/Experience: High school graduate or equivalent required. Other: This position requires 100% on-site work. Must possess a valid Class C driver's license with a good driving record. Other state valid driver's license equivalent to Texas Class C with a good driving record will be considered. Texas state law requires within 30 days of residency, you must possess a valid Texas driver's license. Applicant selected for hire will be subject to a background investigation and drug/alcohol screen test. The City of Beaumont provides equal employment opportunities (EEO) to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law. In addition, The City of Beaumont will provide reasonable accommodations for qualified individuals with disabilities. To request a reasonable accommodation or other assistance contact a Human Resources representative at ************** or through RELAY Texas at ************** or mail your request to P.O. Box 3827, Beaumont, Texas 77704. The City may consider all related education and/or experience in determining the applicant's minimum qualifications and starting salary.

Role and Responsibilities • Assist with specialized craft activities, including fabrication, welding, installation, or maintenance of industrial systems under the guidance of skilled craftsmen. • Transport and handle materials, tools, and equipment efficiently, ensuring that all necessary resources are readily available for the team. • Prepare materials for use by cutting, grinding, or shaping components as directed by supervisors. • Assist with the installation and assembly of industrial systems or machinery, such as piping, electrical systems, or equipment. • Safely operate hand tools, power tools, and industrial machinery to complete tasks under supervision. • Mix, pour, and apply materials like concrete, mortar, or epoxy coatings to surfaces. • Assist in the assembly and disassembly of scaffolding and other temporary structures needed for specialized work. • Ensure that safety protocols and guidelines are adhered to during all tasks, using appropriate personal protective equipment (PPE) and reporting any hazards to supervisors. • Perform quality checks on work tasks to ensure compliance with project specifications and industry standards. • Clean and maintain tools, machinery, and work areas, ensuring they are ready for use. • Support the team in troubleshooting and addressing basic issues with materials, tools, or equipment. • Assist in training or mentoring less experienced Laborer I team members. • Help maintain project timelines by ensuring that tasks are completed efficiently and on schedule. • Perform other tasks as assigned by project supervisors. Qualifications and Education Requirements • High school diploma or equivalent. • 2+ years of experience in an industrial or construction environment, with some exposure to specialized craft work. • Proficiency in using hand tools, power tools, and other industrial equipment. • Ability to read and interpret basic blueprints or project plans. • Knowledge of basic industrial safety practices and ability to follow safety guidelines. • Strong communication skills and the ability to collaborate effectively with a team. • Good physical endurance and the ability to perform manual labor tasks. • Must be able to lift heavy materials, work in confined spaces, and handle a variety of work environments. Preferred Skills: • Experience in a specialized craft area (e.g., refractory, fabrication, scaffolding). • OSHA 10 or OSHA 30 certification. • Basic first aid or CPR certification. • Ability to work independently or with minimal supervision when required. Physical Requirements • Work is primarily performed on construction job sites, exposed to outdoor elements and varying weather conditions. • Must be able to work in confined spaces or elevated areas depending on the project. • Physical labor may be required, including the ability to lift and move equipment or materials. • Personal protective equipment (PPE) must be worn at all times for safety. • Flexibility to work extended hours or on weekends as project schedules require. • The employee must be able to perform the essential functions of the job with or without reasonable workplace accommodation. The individual must also be able to wear and properly utilize appropriate personal protective equipment (PPE) to work or visit within areas where it is required. This includes hard hat, safety glasses/spoggles, respirators, ear plugs, steel toed shoes, or other protective equipment as required by the work performed and location the work is being done. The Company expects and requires all employees to observe and fulfill all safety responsibilities as outlined in workplace safety training, and actively work toward maintaining a safe workplace. Failure to do so can result in disciplinary action, up to and including termination of employment. Regular attendance and punctuality are required of all employees. Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Employment at JT Thorpe Company is on an “at-will” basis. There is no contract of employment between JT Thorpe Company and anyone or all its employees unless explicitly stated elsewhere. Employment security cannot be guaranteed for or by any employee. No Manager, Supervisor, or employee of the Company has any authority to enter into an agreement for employment for any specified period of time or to make an agreement for employment other than at-will. Thorpe Specialty Services and its affiliates provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job DescriptionGeneral Labor(Night shift) $640+ WEEKLY Join SAVARD Personnel Group - where your skills are valued! Key Requirements: Must have general labor experience Must have a valid ID or DL Must have reliable transportation Must be dependable Shifts: Night shift Monday-Friday 6pm-6am Duration: Temp-Perm How to Apply: Apply & Receive offers NOW! Download Savard 24/7 App! Call us at 225-930-0685 or 409-347-8922 Job ID# 53328011

General Labor(Night shift) $640+ WEEKLY Join SAVARD Personnel Group - where your skills are valued! Key Requirements: Must have general labor experience Must have a valid ID or DL Must have reliable transportation Must be dependable Shifts: Night shift Monday-Friday 6pm-6am Duration: Temp-Perm How to Apply: Apply & Receive offers NOW! Download Savard 24/7 App! Call us at ************ or ************ Job ID# 53328011

ESSENTIAL DUTIES AND RESPONSIBILITIES • General shop/ yard housekeeping, maintenance, and organization. • General maintenance of shop tools, equipment, and specialized attachment. • Transfer supplies and equipment between storage and work areas by hand or by use of a shop forklift. • Load/unload trucks picking up or delivering supplies. • General assembly work that may require operating automated machinery and various power/hand tools. • Inspect all parts and equipment in order to properly report defective material or questionable component conditions to management. • May be required to weld, cut, paint, and/or grind various raw building materials. • Assist mechanics with special projects and cover for multiple positions when staffing levels are low/production or operating demands are accelerated. • Flag and spot team members when equipment is being moved. • Observe and follow all company safety rules and policies. • Performs other duties as requested. EDUCATION & EXPERIENCE High School diploma or equivalent TECHNICAL SKILLS • Ability to follow directions, prioritize and multi-task • Ability to safely and efficiently operate basic hand tools and heavy equipment. • Capable of operating hydraulic lifts, dollies, and pallet jacks • Ability to adhere to and meet deadlines • Strong communication skills TRAVEL What is the % of business travel for this job? 0% How much international business travel? 0% Does this job require working in multiple states or countries? ☒ YES ☐ NO The above statements are not intended to be an exhaustive list of all responsibilities, duties, and skills required of personnel so classified; nothing restricts the company's right to change, assign, or reassign duties and responsibilities at any time or for any reason.