Industrial engineer jobs in Port Huron, MI - 162 jobs

**GM DOES NOT PROVIDE IMMIGRATION-RELATED SPONSORSHIP FOR THIS ROLE. DO NOT APPLY FOR THIS ROLE IF YOU WILL NEED GM IMMIGRATION SPONSORSHIP NOW OR IN THE FUTURE. THIS INCLUDES DIRECT COMPANY SPONSORSHIP, ENTRY OF GM AS THE IMMIGRATION EMPLOYER OF RECORD ON A GOVERNMENT FORM, AND ANY WORK AUTHORIZATION REQUIRING A WRITTEN SUBMISSION OR OTHER IMMIGRATION SUPPORT FROM THE COMPANY (e.g., H-1B, OPT, STEM OPT, CPT, TN, J-1, etc.).** **This job may be eligible for relocation benefits.** **Onsite:** This role is categorized as onsite. This means the successful candidate is expected to report to Orion, MI on a full-time basis. **The Role:** Lean Material Strategy Industrial Engineer will work directly with production, engineering, and Core Teams in implementing lean manufacturing systems. They will analyze throughput data to help departments improve performance. They will be responsible to prepare standardized work for future products alongside the core team and help to launch great products. In steady state, they will drive continuous improvement projects. **What You'll Do:** + Coordinate problem solving activity on plant floor level with multi-department resources + Support as necessary in-plant tryouts, process changes, and implementation plans to resolve ergonomic issues + Assist in establishing operational methods and work standards using various measurement techniques + Analyze throughput data to determine plant bottlenecks then work with the floor to eliminate them + Analyze existing operations and proposes cost justified improvements + Optimize use of floor space, materials, personnel, and equipment + Assist in planning new facilities, operations and/or relocation of same + Develop time studies for job operations and initial set up of sequence material cells + Provide information for various management systems + Regular contact with others outside the work group + Monitor adherence to recommended safety procedures and good housekeeping + Recommend changes to work station, labor, and layouts to reduce waste and cost per vehicle + Work alongside Core team, manufacturing engineering team, engineering team to establish lean work station set-up including standardized work + Establish execution plans to complete the job and or/project + Attend/participate in LAUNCH activities in Warren, MI including but not limited to Meetings, Reviews, Builds + Assist in training launch follow-up team members + Support Floor Readiness for SORP **Required Qualifications:** + 5+ years of experience in a manufacturing or related environment + 2+ years' experience as a Material or Production Industrial Engineer + Highly developed oral & written communication skills + High level of interpersonal skills + Project management skills + High level of analytical ability + Experience creating Standardize Work + Knowledge of and experience in Standard Time Data Systems (STDS) + Knowledge of and experience in Assembly Processing Systems (APS) + Knowledge of AutoCad **Preferred Qualifications:** + Degree in Industrial Engineering or equivalent experience + Knowledge of and experience in GMOS + Knowledge of MGO + Knowledge and experiences in Throughput Analysis + Knowledge of computer software (Office suite and engineering software) GM does not provide immigration-related sponsorship for this role. Do not apply for this role if you will need GM immigration sponsorship now or in the future. This includes direct company sponsorship, entry of GM as the immigration employer of record on a government form, and any work authorization requiring a written submission or other immigration support from the company (e.g., H1-B, OPT, STEM OPT, CPT, TN, J-1, etc). This role is categorized as onsite. This means the selected candidate is expected to report to a specific location on a full-time basis. The selected candidate will be required to travel This job may be eligible for relocation benefits. **About GM** Our vision is a world with Zero Crashes, Zero Emissions and Zero Congestion and we embrace the responsibility to lead the change that will make our world better, safer and more equitable for all. **Why Join Us** We believe we all must make a choice every day - individually and collectively - to drive meaningful change through our words, our deeds and our culture. Every day, we want every employee to feel they belong to one General Motors team. **Benefits Overview** From day one, we're looking out for your well-being-at work and at home-so you can focus on realizing your ambitions. Learn how GM supports a rewarding career that rewards you personally by visiting Total Rewards resources (************************************************************* . **Non-Discrimination and Equal Employment Opportunities (U.S.)** General Motors is committed to being a workplace that is not only free of unlawful discrimination, but one that genuinely fosters inclusion and belonging. We strongly believe that providing an inclusive workplace creates an environment in which our employees can thrive and develop better products for our customers. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, national origin, citizenship status, religion, age, disability, pregnancy or maternity status, sexual orientation, gender identity, status as a veteran or protected veteran, or any other similarly protected status in accordance with federal, state and local laws. We encourage interested candidates to review the key responsibilities and qualifications for each role and apply for any positions that match their skills and capabilities. Applicants in the recruitment process may be required, where applicable, to successfully complete a role-related assessment(s) and/or a pre-employment screening prior to beginning employment. To learn more, visit How we Hire (********************************************* . **Accommodations** General Motors offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email (Careers.Accommodations@GM.com) us or call us at ************. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying. We are leading the change to make our world better, safer and more equitable for all through our actions and how we behave. Learn more about: **Our Company (************************************************** **Our Culture** **How we hire (************************************************ Our diverse team of employees bring their collective passion for engineering, technology and design to deliver on our vision of a world with Zero Crashes, Zero Emissions and Zero Congestion. We are looking for adventure-seekers and imaginative thought leaders to help us transform mobility. Explore our global locations (******************************************** We are determined to lead change for the world through technology, ingenuity and harnessing the creativity of our diverse team. Join us to help lead the change that will make our world better, safer and more equitable for all by becoming a member of GM's Talent Community (beamery.com) (*********************************************** . As a part of our Talent Community, you will receive updates about GM, open roles, career insights and more. Please note that filling out the form below will not add you to our Talent Community automatically; you will need to use the link above. If you are seeking to apply to a specific role, we encourage you to click "Apply Now" on the job posting of interest. The policy of General Motors is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual's age, race, color, sex, religion, national origin, disability, sexual orientation, gender identity/expression or veteran status. Additionally, General Motors is committed to being an Equal Employment Opportunity Employer and offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email us at Careers.Accommodations@GM.com .In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.

The Industrial Engineer will be responsible for direct/indirect labor and activities affecting line speed, cycle checks, scrolls and workstation assignments, change control, and line balancing. A qualified candidate will utilize Lean concepts to identify and eliminate waste as well as perform time/motion studies using MODAPTS. This position will assist the IE Manager and IE Supervisor with technical services to maintain efficient levels of Lean manufacturing and manning. The Industrial Engineer will support Stellantis Production Way (SPW) Domains as required. Basic Qualifications: * Bachelor's degree in Industrial Engineering or related field * Ability to interface with all levels of the organization from shop floor to management * Must be self-motivated * Excellent organizational skills * Excellent written and oral communication skills * Microsoft Office experience * Ability to work any shift, overtime and some travel may be required occasionally Preferred Qualifications: * Experience implementing Stellantis Production Way in a union environment * Knowledge of time study/standards, ratings, MODAPTS, ergonomic evaluations * Knowledge of Chrysler Automated Manufacturing Planning System (AMPS) knowledge * Assembly launch experience * Kitting and indirect labor experience

IAC Port Huron is currently recruiting for a Manufacturing Engineer, for our PH, MI facility. The role will include responsibilities for supporting production and being responsible for development of processes for new programs as assigned and the continuous improvement of existing programs assigned. Position Specific Requirements: Responsible for developing and maintaining the process / process parameters for all phases of programs: pre-prototype, prototype, pre-launch, SOP, post-launch, program balance out, and service for all assigned programs. Develop and maintain BOMs (bill of materials) for assigned programs. Implement Engineering Changes (EC) in Customer, Corporate and Plant Systems: Performs trials and validation runs. Ensure proper training for manufacturing personnel. Modify equipment or tooling as required. Ensure successful: Run @ Rates, PSO's, HVPT's, etc. and completion of all related requirements. Support team requirements for quality roadmaps, corrective actions, continuous improvement activities, scrap reductions, OEE improvements, and manufacturing support as needed. Development and maintenance of PFMEA's Process Flow's, Operator Standard Work Instructions, and all assignments in Prolink, reporting system: Ensure compliance to standards for all AP QP documents. Coordinate/track and implement scrap reduction initiatives, root cause, and operational improvements to assigned programs. Support other programs (non-assigned) as required during any critical stages or issues. Developments of cell layout for optimized material flow and ensure ergonomic issues are addressed. Track tool designs and builds, ensure tooling meets IAC PH guidelines for safety, ergonomics, robustness, and overall quality and craftmanship. Coordinate tool repair / maintenance as required. Support / represent Mendon for feasibility reviews/design reviews for assigned programs. Track all material usage during all trials/prototypes. Perform Process Walks as scheduled. Complete special projects as assigned. Knowledge on robotic system programing is a plus. Key Qualifications: BS in Engineering, or related discipline. 2-5 years of experience in Manufacturing/Process Engineering related to the automotive industry. Strong written and verbal communication skills. Proficient in Microsoft Office software. Strong Analytical and problem-solving skills.

The Marmon Group LLC As a part of the global industrial organization Marmon Holdings-which is backed by Berkshire Hathaway-you'll be doing things that matter, leading at every level, and winning a better way. We're committed to making a positive impact on the world, providing you with diverse learning and working opportunities, and fostering a culture where everyone's empowered to be their best. Location: Preferred near Transportation Group facilities……Included below. Travel: Up to 50% (domestic) About the Role Join the fast-growing Marmon Transportation Products Group - a dynamic team of 30+ companies and 5,000+ employees focused on advancing industrial excellence. We are seeking a Continuous Improvement (CI) Engineer to lead transformational improvement efforts through a powerful combination of Lean, process engineering, and industrial automation. This is an individual contributor role with leadership influence, leading initiatives, and setting the bar for technical excellence. You will work hands-on with our plants to identify opportunities, scope solutions, and implement real, physical improvements to support growth and drive bottom-line impact. As an individual contributor in a team atmosphere the drive to simultaneously be self-directed and feedback oriented, consistently seeking feedback, and ways to improve is a required attribute. You will act as a technical leader and project driver across multiple business units, leveraging your CI expertise to identify improvement opportunities, implement sustainable solutions, and build Lean capability at all levels of the organization. This role also has a heavy team component including supporting corporate CI rollouts, facilitating webinars, leading shop floor kaizens, and delivering training to scale best practices across Marmon Transportation. Team The Marmon Transportation CI team drives growth across transportation business units through process improvements and automation. Many units face daily operational challenges, limiting future improvement planning. The CI team offers support by implementing "quick lean wins" with no capital investment and preparing for sustainable growth through automation. Our strategy includes identifying waste, conducting root cause analysis, and hosting lean Kaizen events. After stabilizing processes, we focus on innovation and automation projects. As our team grows, we aim to enhance our capacity to meet each unit's needs, improving safety, quality, and cost. KEY RESPONSIBILITIES Lean Leadership & Continuous Improvement * Lead 3 or more cross-functional projects to improve safety, quality, delivery, and cost * Facilitate and execute Lean tools including Value Stream Mapping, Kaizen/Impact Events, A3 problem solving, and standard work development * Partner with site leadership and process owners to identify process gaps and implement sustainable solutions * Coach and mentor employees at all levels - from shop floor to leadership - in Lean thinking and sustainable operational practices * Develop plant-level continuous improvement plans based on assessments and key business needs * Track and report KPIs and CI progress; establish effective Management Review systems * Assist in identifying metrics, creating dashboards, and reporting on progress toward plant and corporate CI targets * Help lead Management Review and follow-up routines to drive accountability and sustainment * Understand each business unit and locations place in the lean journey and guide them culturally and technically to the next step Process Engineering & Automation * Analyze and map existing manufacturing processes; identify bottlenecks and design future states aligned with business growth goals * Scope and implement automation solutions, including in-house and vendor-built systems * Lead feasibility studies, cost-benefit analyses, and ROI modeling to support capital requests * Collaborate with engineers, vendors, and integrators to prototype and deploy technologies * Support IIoT initiatives, system connectivity, and data collection for performance tracking * Support Business Units 8020 efforts and guide them through implementing 8020 at a business and shop floor level Mentorship & Technical Guidance * Act as the project technical lead and mentor junior engineers in Lean and automation problem-solving * Share expertise across multiple locations with diverse stakeholder teams * Help improve internal automation processes and contribute to standardization efforts Team Culture Work Ethic * Team passionate about driving improvements for BUs * Fun, collaborative environment Mentorship & Collaboration * Senior mentors with years of operational and technical experience * Emphasize helping teammates and BUs People Centric Team * Success of individuals and team matters * Proud of strong relationship Qualifications Required * Bachelor's degree in mechanical, Industrial, Automation Engineering, or related fields * Experience in manufacturing operations, Lean, CI, and/or automation engineering * Deep understanding of Lean principles and a track record of leading impactful CI projects * Demonstrated success leading Lean initiatives and delivering automation solutions * Strong communication, organizational, and leadership skills * Comfort working in factories and in ambiguous environments where scope evolves Preferred * Hands-on experience with shop floor improvement projects * Exposure to CAD software (SolidWorks, Fusion 360, AutoCAD, etc.) * Working knowledge of IIoT and data systems integration * Familiarity with automation implementation in a Lean context * Familiarity and/or a drive to learn/utilize AI and industrial simulation software What We Offer * Influence across a large industrial network of 30+ companies * Opportunities to attend industry trade shows and research state-of-the-art technologies * Career development through hands-on projects and leadership coaching * Flexibility to shape your role - leadership tracks available if desired * Mentorship and professional development pathways - including future leadership roles if desired Come join our team! Pay Range: 56,000.00 - 84,000.00 We offer a comprehensive benefits package that may include medical, dental, vision, 401k matching, and more! Following receipt of a conditional offer of employment, candidates will be required to complete additional job-related screening processes as permitted or required by applicable law. We are an equal opportunity employer, and all applicants will be considered for employment without attention to their membership in any protected class. If you require any reasonable accommodation to complete your application or any part of the recruiting process, please email your request to ******************, and please be sure to include the title and the location of the position for which you are applying.

CROWN Cork & Seal USA, Inc., a wholly owned company of Crown Holdings, Inc. is a global leader in the design, manufacture and sale of packaging products for consumer goods. At Crown, we are passionate about helping our customers build their brands and connect with consumers around the world. We do this by delivering innovative packaging that offers significant value for brand owners, retailers and consumers alike. With operations in 39 countries employing approximately 25,000 people and net sales of approximately $12 billion, we are uniquely positioned to bring best practices in quality and manufacturing to our customers to drive their businesses locally and globally. Sustaining a leadership position requires us to build a team of highly talented, dedicated and driven individuals. Division: Crown's Food Division is a premier manufacturer of food cans and ends. Our complete array of food packaging serves a variety of markets, including fruit, vegetables, dairy, fish, meat, ready meals, pet food, infant milk powder and other dry food products. We offer a wide selection of food cans from round to bowl as well as shaped cans. We truly focus on excellence. Here is your chance to join the Crown Food Business Unit. Location: Ideal candidate will reside near a major airport in the Midwest and/or Eastern Region of the US as this position will require up to 70% regular travel to the Plant locations. Position Overview: The Manufacturing Engineering (with an Electrical Engineering emphasis) will support eight (8) facilities of the North American Food Division manufacturing operations. This position will work closely with the manufacturing facilities in regard to electrical programming, problem solving, etc. for both the 3-Piece and 2-Piece steel and aluminum food cans and end processes. Duties And Responsibilities: Reporting directly to the Sr Manager Production Engineering (Electrical) duties would include but not be limited to the following: Providing problem-solving on electrical technical matters relating to food can and end performance Developing full documentation package of new and existing installations Continued support of new installations and plants until production efficiencies and goals are met Support plants and personnel as required to identify production problems or issues, identify viable solutions and implement the same Develop job completion schedules and monitor their progress Guide, support and train plant electrical teams Qualifications: In addition to the specific responsibilities listed above, the ideal candidate will possess the following: Minimum Requirements BS degree in Electrical or Electronics Engineering or a related discipline 5+ years in a packaging manufacturing environment, food production or a similar industry. Strong technical knowledge demonstrating broad understanding of electrical power and controls design and installation Demonstrated experience in PLC logic programming, documentation, and troubleshooting control programs (Allen Bradley, Siemens, Modicon, etc.) Experience with facilities power distribution (including voltages to 600v & three phase) and control systems and subsystems Power transmission equipment such as gearboxes, drive trains, conveying equipment, etc. Proven record of delivering engineering outputs to achieve scheduled targets Effective communication skills are needed for this role, both verbal and written as well as the ability to interact with employees at all levels of the organization. Self-motivated and eager to take the initiative; with the ability to work effectively in a team setting and as an individual Well organized and detail oriented with good time management skills Strong PC skills are a must, especially using Word, Outlook, and Excel. Committed to on-going personal development and career growth Preferred Requirements Steel and/or aluminum manufacturing environment experience would be ideal A certification in Six Sigma and/or Lean Manufacturing would be a plus Physical Requirements While performing the duties of this job, the associate is regularly required to sit, stand, walk, use hands, reach with hands and arms, and may be required to balance, stoop, kneel, crouch, or crawl The associate may lift and/or move up to 50 pounds Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus Working Conditions Will be required to perform job duties outside of the typical office setting in a plant environment as well as in an office. While performing the duties of this job, the associate may be exposed to moving mechanical parts and vehicular traffic. The associate may be exposed to a wide range of temperatures. The noise level is frequently loud. *Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.

Yates Cylinders is seeking a detail-oriented and process-driven Manufacturing Engineer to optimize and support production operations at our facility. The ideal candidate will play a critical role in improving manufacturing processes, reducing waste, and ensuring product quality in the fabrication and assembly of hydraulic and pneumatic cylinders. Key Responsibilities: Develop, evaluate, and improve manufacturing methods, including machining, welding, honing, assembly, and testing processes. Design tooling, fixtures, and work instructions to improve production efficiency and operator safety. Collaborate with design engineering, CNC programmers, and quality control to support new product introductions and custom cylinder builds. Analyze production processes and implement lean manufacturing and continuous improvement initiatives (5S, Kaizen, value stream mapping). Troubleshoot process issues and work with production teams to implement corrective actions. Monitor and improve overall equipment effectiveness (OEE), cycle times, and scrap rates. Support the implementation of ERP/MRP systems and ensure accurate BOMs and routings. Ensure all processes comply with company quality standards, ISO 9001, and safety regulations. Qualifications: Strong understanding of machining operations (CNC turning, milling), welding, and assembly techniques. Experience with CAD (SolidWorks preferred) and CAM software. Familiarity with GD&T, process flow diagrams, PFMEAs, and control plans. Hands-on experience with lean manufacturing and Six Sigma methodologies is a plus. Strong communication, teamwork, and problem-solving skills. Preferred Experience: Previous experience working with hydraulic or pneumatic components. ERP software experience (such as Epicor, SAP, or similar). Root cause analysis (RCA) and statistical process control (SPC). Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience: Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, or related field. 2-5 years of experience in a manufacturing engineering role, preferably in a heavy industrial or hydraulic component environment. Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Math Ability: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Computer Skills: To perform this job successfully, an individual should have knowledge of Excel, Internet Explorer, Made2Manage, and Microsoft Outlook. Why Join Yates Cylinders? Yates Cylinders is a leader in the hydraulic cylinder industry with a reputation for quality and fast turnaround. We offer a dynamic work environment, competitive compensation, and opportunities for professional growth.

Visioneering Story- A powerful team with a strong work ethic. Visioneering, Inc. provides the aerospace industry with high-quality conceptual design, engineering, and innovative tooling. As a full-service provider, established in 1953, we provide industry-leading organizations with totally integrated program management, design, engineering, NC machining and manufacturing. Our quality management system has been tried and tested to meet the stringent requirements of AS9100 certification. More information? Check out our quick video: Company Video - Visioneering (vistool.com) Position Title: Manufacturing Engineer Location: On-site (Auburn Hills) Shifts Needed: Day Days | Monday- Friday 6a-4:45p + Saturday 6a-12p Benefits Direct hire position, Referral Bonus Program, Job Development Training, Holiday Schedule, 401k, Flexible Spending Account, Paid Time Off, Health/Dental/Vision Insurance, Pet Insurance, Life/Disability Insurance, ADP Discounts, and MORE. Essential Functions: Evaluate manufacturing processes based on quality criteria, such as efficiency and speed Interpret composite tooling requirements, and curing processes Assist with material selection, especially with fiber-reinforced polymers and resins Troubleshoot issues specific to composite manufacturing (e.g., delamination, fiber misalignment) Collaborate with design engineers to ensure manufacturability of composite parts Recommend and implement improvements in composite processing techniques (e.g., autoclave, resin infusion, hand lay-up) Ensure designs and processes meet FAA, EASA, DoD, and company-specific requirements Provide technical guidance to manufacturing teams during fabrication and assembly Resolve shop-floor issues related to materials, tooling, curing cycles, and bonding Improve manufacturability, reduce scrap, and optimize cycle times Prepare engineering reports, test documentation, and certification packages Maintain configuration control and adherence to quality management systems (AS9100) Contribute to corporate quality policy and objectives Regular, consistent, and punctual attendance Follow OSHA safety guidelines, and ITAR compliance Other duties as assigned Requirements/Qualifications: Hands-on experience with composite materials and processes is highly desirable Independent judgment to plan, prioritize, and organize diversified workloads Ability to suggest changes in office practices or procedures Ability to work with a diverse group of external and internal contacts at all levels of the organization Experience with quality systems (AS9100) Experience with CAD (CATIA) High School diploma or GED required Composites Engineering degree preferred Due to the nature of work performed within our facilities, U.S. citizenship or Valid Permanent Resident status is required- No sponsorship offered. Equal Opportunity Employer Visioneering is an equal employment opportunity employer, offering equal employment opportunities to all individuals regardless of race, color, religion, sex, age, national origin, disability status, sexual orientation, protected veteran status, marital status and any other characteristic protected by law.

Fisher Dynamics is the automotive industry's premier supplier of safety - critical seat structures and mechanisms. Steeped in a tradition of excellence, and rooted in automotive innovation, the Fisher story is filled with automotive manufacturing milestones. We bring design, engineering, and manufacturing vehicle seating systems to a new level with innovative thinking. We're about cutting edge ideas. We have created an environment that encourages an uninterrupted flow of revolutionary concepts and unique ideas. We are currently seeking an experienced Manufacturing Engineer for our Saint Clair Shores, MI campus. This position develops and maintains effective Manufacturing Processes and Systems using best engineering and quality practices to provide optimum solutions to meet company goals and objectives. This position drives continuous improvement activities and cost reduction strategies focused on enhancing production efficiency, reducing waste and exceeding customer expectations. The right candidate MUST have a working knowledge of welding facilities RESPONSIBILITIES: Collaborate with Assembly and Production teams to resolve machine, design, equipment, and process issues, ensuring products meet customer expectations. Coordinate with Quality teams to resolve defects, reduce scrap rates, and implement corrective actions. Troubleshoot manufacturing issues on the production floor using structured problem-solving tools such as 8D and 5 Whys to address bottlenecks, downtime and identify root causes. Execute and follow up on manufacturing improvements related to procedures, labor optimization, production rates, workflow, material handling (preferred), and detection methods. Audit and maintain manufacturing documentation and reports. Update and develop specifications, standard operating procedures, process routings, engineering change requests, equipment and facility layouts, and PFMEAs. Oversee plant layout redesigns and automation initiatives, ensuring timely completion and adherence to budget. Lead the development, maintenance, and implementation of PFMEAs and process-related improvements. Identify, develop, and implement new processes and systems in line with management's technical and financial objectives. Provide cross-functional support for new product launches and design changes, ensuring manufacturing feasibility and smooth implementation. Respond effectively to quality concerns and support the achievement of departmental Key Performance Indicators (KPIs). Follow Advanced Product Quality Planning (APQP) methodologies to ensure readiness of products and processes. Develop and implement manufacturing processes, including the creation of Job Element Sheets (JES), and select appropriate tooling and equipment based on requirements for process capability, capacity, cost-efficiency, maintainability, and ergonomics. Provide leadership and direction to hourly personnel to meet program goals and maintain compliance with company policies and procedures. Use simulation tools (e.g., Arena, FlexSim) to model workflows, analyze bottlenecks, and balance assembly lines. Establish and implement quality plans to ensure proper setup and calibration of: All metrological instruments, including gauges Fixtures and setups Optimal tooling for each job Efficient, cost-effective, and high-quality manufacturing operations Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education Bachelor's degree in mechanical or Process Engineering, or equivalent combination of education, training, and experience. Experience 5+ years of experience in manufacturing, preferably within the automotive seating and/or mechanisms environment. Welding experience is a plus. Familiarity and awareness in the following areas: Pedestrian Safety, Robotics, IATF 16949:2015, 8D and 5 Whys methodologies, Emergency Evacuation Procedures, Ergonomics, Hazard Communication, Safety Signage Awareness, Personal Protective Equipment (PPE), Confined Space Awareness, Bloodborne Pathogens Awareness, Lockout/Tagout Procedures, Failure Mode and Effects Analysis (FMEA), Advanced Product Quality Planning (APQP) Skills Ability to work in a fast-paced, multitasking environment. Strong troubleshooting skills related to manufacturing processes and equipment. Experience in writing Statements of Work (SOW). Excellent written and verbal communication skills. Knowledge of MIG welding and laser welding processes preferred. Proficient in Microsoft Office Suite (Excel, Word, PowerPoint, Outlook). Effective communication and collaboration across departments and with production staff. Understanding of Methods-Time Measurement (MTM) or other motion/time study methodologies. Strong root cause analysis capabilities in a manufacturing setting. Working knowledge of Kaizen and lean manufacturing principles. Intermediate proficiency in AutoCAD. Work Environment 50% Office Environment 50% Production Plant Floor. Minimal travel may be required. Physical Demands Ability to lift up to 30 lbs. Ability to work 8-hour shifts on the production plant floor.

About Atomic Atomic Industries is reinventing how the world makes things. From cars and aerospace systems to medical devices and packaging, most physical goods begin life in a mold or are shaped by a manufacturing tool. Producing these tools has always been slow, manual, and dependent on scarce expertise, taking weeks or months. We're changing that. At our Detroit headquarters, we combine the industrial DNA of America's manufacturing heartland with the speed, intelligence, and precision of Silicon Valley. Our AI-driven platform tackles the hardest problems in geometry, process planning, and fabrication, collapsing production timelines from months to days and soon, minutes. We don't just build software; we run a fully operational factory where our technology produces production-grade tooling every week, enabling tight feedback loops and rapid iteration. Backed by top-tier investors, we're restoring speed, flexibility, and capability to the American industrial base. Our mission is to make manufacturing as agile and scalable as the digital world, and in doing so, rebuild the infrastructure of the physical economy. About the Role We are seeking a manufacturing engineer to help build and launch a high-volume, highly automated injection molding plant. You will work closely with the Plant Manager to design and bring up molding cells, specify and commission equipment, and engineer production lines to run at high yield and uptime from day one. This is a hands-on, execution-focused role. You will be responsible for engineering the full molding cell-from material handling to press automation to part packaging-not just optimizing isolated processes. The ideal candidate has launched automated molding lines in fast-moving, high-mix environments and is comfortable taking ownership of throughput, quality, and cycle time from end to end. Responsibilities Engineer, design, and commission complete injection molding cells, including presses, EOAT, robotics, dryers, vision systems, material handling, and packaging equipment Collaborate with tooling and automation teams to ensure that molds and fixtures are designed for automation, reliability, and maintainability Specify, install, and validate manufacturing equipment, including thermal systems, drying/blending systems, and auxiliary automation Own cell layout, material flow, and process integration; optimize for uptime, cycle time, and changeover efficiency Drive qualification activities including FAT/SAT, DOE, Cpk, GR&R, and root cause analysis Integrate sensor feedback and process monitoring systems in collaboration with automation and software teams Generate and maintain clear, concise documentation including process instructions, validation protocols, and standard work Work alongside quality and process technicians to establish control plans and quality checkpoints Qualifications 5+ years in manufacturing engineering for injection molding operations, with experience launching automated production cells Demonstrated ownership of equipment specification, vendor interaction, process integration, and startup in a production setting Strong working knowledge of mold tooling, press systems, cycle time optimization, and automation integration Experience with high-volume or high-mix operations in plastics manufacturing Familiarity with robotic systems, vision inspection, thermal management, and downstream automation Proficient in root cause analysis, process validation, and lean manufacturing principles Able to work cross-functionally and move quickly with minimal oversight in a startup environment Preferred Experience with Moldflow, RJG, or scientific molding techniques Exposure to MES or real-time factory monitoring systems Proficiency in CAD (SolidWorks, Creo, or equivalent) and engineering documentation systems Background in high-performance, fast-paced manufacturing environments that emphasize quality, speed, and iteration Benefits Competitive salary and generous equity package Full medical, dental, and vision coverage for employees and dependents 401(k) PTO with a 15-day minimum Quarterly team travel to Detroit Visa support for TN, E‑3, and O‑1 candidates Hardware stipend and on-site prototype lab access

This position exists to execute project management tasks related to capital projects, lean manufacturing projects, and other manufacturing improvement related activities. A significant portion of the job involves the use of the SAP database (Routings and Bills of Material). Key Responsibilities Works with Business Unit to create project task lists and timelines for multiple projects that help improve Formsprag's ability to satisfy customers Executes a wide variety of project tasks, commensurate with experience Tracks progress to schedule and provide feedback on performance. Helps with identification and selection of equipment to support projects With input from Production Leaders, analyzes and plans work force utilization, space requirements and workflow, and designs layout of equipment and workspace for maximum efficiency. Uses Lean tools to develop standard work improvements and optimize flow in manufacturing cells. Facilitate quoting and procurement of project items and services Compiles and organizes project data such as quotes, expenditures, and service calls Creates new manufacturing routing sequences, bills of material, and work instructions, etc. for the efficient manufacture of clutch components Synchronizes mfg. data of legacy products within SAP Revises Bills of Material (BOMs) in SAP, as necessary Revises Routing information (Setup/Run Time, etc.) in SAP, as necessary Revises Material Master information in SAP, as necessary Creates technical documents to assist with process control and product assembly Participates in lean manufacturing Kaizen events as appropriate Restrictions imposed by federal export control laws may limit this job opportunity to candidates who are a ‘U.S. Person', which includes U.S. citizens, U.S. nationals, U.S. permanent residents, individuals granted asylum in the United States, and refugees in the United States. PROFESSIONAL EXPERIENCE/QUALIFICATIONS 5+ Minimum Years of Experience Necessary: Knowledge and competence in Microsoft Excel, Word, Project, and PowerPoint are highly desirable. SAP experience is highly desirable. Strong organizational skills are necessary for this position. Bachelor's degree (B.A.) from four-year college or university; or one to two years related experience and/or training; or equivalent combination of education and experience. Technical training or degree helpful. Benefits Medical, Dental, Vision and Prescription Drug Coverage Spending accounts (HSA, Health Care FSA and Dependent Care FSA) Paid Time Off and Holidays 401k Retirement Plan with Matching Employer Contributions Life and Accidental Death & Dismemberment (AD&D) Insurance Paid Leaves Tuition Assistance About Regal Rexnord Regal Rexnord is a publicly held global industrial manufacturer with 30,000 associates around the world who help create a better tomorrow by providing sustainable solutions that power, transmit and control motion. The Company's electric motors and air moving subsystems provide the power to create motion. A portfolio of highly engineered power transmission components and subsystems efficiently transmits motion to power industrial applications. The Company's automation offering, comprised of controls, actuators, drives, and precision motors, controls motion in applications ranging from factory automation to precision control in surgical tools. The Company's end markets benefit from meaningful secular demand tailwinds, and include factory automation, food & beverage, aerospace, medical, data center, warehouse, alternative energy, residential and commercial buildings, general industrial, construction, metals and mining, and agriculture. Regal Rexnord is comprised of three operating segments: Industrial Powertrain Solutions, Power Efficiency Solutions, and Automation & Motion Control. Regal Rexnord has offices and manufacturing, sales and service facilities worldwide. For more information, including a copy of our Sustainability Report, visit RegalRexnord.com. Equal Employment Opportunity Statement Regal Rexnord is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity, pregnancy, age, ancestry, national origin, genetic information, marital status, citizenship status (unless required by the applicable law or government contract), disability or protected veteran status or any other status or characteristic protected by law. Regal Rexnord is committed to a diverse and inclusive workforce. We are committed to building a team that represents diverse and inclusive backgrounds, perspectives, and skills. If you'd like to view a copy of the company's affirmative action plan for protected veterans/individuals with disabilities or policy statement, please email ***************************. If you have a disability and you believe you need a reasonable accommodation in order to search for a job opening or to submit an online application, please e-mail ***************************. Equal Employment Opportunity Posters Notification to Agencies: Please note that Regal Rexnord Corporation and its affiliates and subsidiaries ("Regal Rexnord") do not accept unsolicited resumes or calls from third-party recruiters or employment agencies. In the absence of a signed Master Service Agreement or similar contract and approval from HR to submit resumes for a specific requisition, Regal Rexnord will not consider or approve payment to any third-parties for hires made.

Job Description The Manufacturing Engineer is responsible for the Planning, Set up, Launch of new Manufacturing Processes. The Manufacturing Engineer will also be responsible to Continuously Improve Prototype and Existing Processes. This includes technical support to the Operations and Engineering Teams. ESSENTIAL ROLES AND RESPONSIBILITIES: New Processes; Develop cost estimates for facilities, equipment, and manpower Perform Process Failure Mode and Effect Analysis (PFMEA) Create Scope of Work, solicit potential suppliers, hold bid meetings, make purchasing recommendations to management, and arrange for purchase of equipment Analyze and plan work force utilization, space requirements, workflow, layout of equipment and workspace for maximum efficiency. Lead the manufacturing sign off activity on equipment through all build phases Perform / Support Work Instruction Creation Design and execute design of experiments (DOE) to identify optimal process parameters for weld strength, electrical resistance, quality, and repeatability Prototype Processes; Support prototype activities for test and build purposes Existing Processes; Develop, evaluate, and improve existing manufacturing methods Design tools, jigs, fixtures, and assembly aids that are capable for the purpose intended Establish process/product flow & control plans for components and systems Initiate actions to prevent the occurrence of any non-conformities relating to the manufacturing process Confers with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate production processes Conduct time study and line balancing activities Support Work Instruction Maintenance Develop and optimize laser welding processes Perform weld characterization and failure analysis using cross-sections, microscopy, tensile/shear testing Work collaboratively with the maintenance and operations teams to ensure all equipment is in optimal working condition Cost Savings; Develop cost saving proposals Change Management; Evaluate the impact of design changes on manufacturing processes, tools, equipment, quality and performance Modify and/or enhance manufacturing processes, tools, and equipment to obtain specified functional and operational performance Initiate, recommend and/or provide solutions through designated channels Verify the implementation of solutions Support change control meetings REQUIREMENTS: Bachelor's Degree in Engineering or Engineering Technology. Experience with electrical componets and systems. Battery or Power Pack Unit Assembly strongly preferred Understanding of Just-in-Time delivery and lean applications. 5+ years working experience in a manufacturing plant as a Manufacturing Engineer or equivilent. Ability to work in a cross functional environmnet with Operaitons, Engineering, and Quality. Proficient user of Microsoft Office Suite Applications - Especially within Excel. Basic Knowledge Welding, Assembly, and Quality Checking Processes. INTERNAL TRAINING REQUIREMENTS: Quality Policy Health & Safety Orientation Quality Objectives New Hire or New Position Orientation Environmental Policy Statement Samsung Philosophy and Values QUALITY ASSURANCE REQUIREMENTS: Comply with requirements of the Quality Operating System (QOS) in accordance with ISO 9001:2008 Identify concerns and initiate corrective actions (through verification) relating to product, process and quality systems Initiate preventative and continuous improvement actions relating to product, process and quality systems HEALTH & SAFETY REQUIREMENTS: Follow safe work procedures established by the Company; and follow the OH&S directions of the head of your department or supervisor Use of appropriate personal protective equipment (PPE) and safety systems Where PPE is required to control exposure to hazards in the workplace, wear and maintain the PPE as directed, as indicated in a risk assessment, or as required in OH&S procedures Use other safety and emergency equipment provided in the workplace as directed or as required in OH&S procedures Assist with the preparation of risk assessments Before commencing work or research, a risk assessment should be conducted to identify, assess and control the hazards associated with the work or research. This should be conducted in conjunction with other relevant staff, researchers and the supervisor Report OH&S problems Report workplace hazards to the supervisor as soon as possible after they occur Report injury or illness arising from workplace activities using the incident/injury reporting system as soon as possible after the incident Lead incident investigations and implement corrective actions Complete monthly H&S inspections

Process Engineering Opportunities near Warren, Michigan A highly successful Automation company with a facility near Warren, Michigan is seeking several Process Engineers for their Large-Scale Body in White Projects. The Process Engineer pay rates are anticipated to be hourly based on each candidates experience and education. Overtime is paid at premium rates over 40 hours. All well qualified candidates will be considered regardless of pay rate. We offer excellent benefits including Medical, Dental, 401k and more! Candidates will possess most (if not all) of the following: 3+ years of experience in Process Engineering or Industrial Engineering with Large-Scale Projects - Powertrain, BIW, automation equipment, material handling, conveyors, robotics, etc. BS / AAS in Mechanical Engineering or related field of study preferred. Proficient in NX or SolidWorks, other CAD packages are acceptable. 20-25% travel, mostly day trips in Michigan and Ohio, passport required; occasional travel to Canada or Mexico based on project needs. Willingness to work 40-45 hours/week. Ability to work directly with project management, project engineers, guide teams and communicate with customers on technical matters (punch-list & closeout). High potential for contract-to-direct hire opportunity. Must be able to work in the US and be able to complete standard pre-hire checks including drug screen, background, references, etc.

... • Creating and updating plant 2D layouts • Managing plant's Vault layout and drawing system • Engineering lead for plant innovation efforts • Engineering lead for plant asset management process You'll have... High School Diploma or GED 1 year experience working in a manufacturing environment Work well in a team setting Proficient at creating 2D plant layout drawings Effective at leading and facilitating Even better, you may have... Bachelor of Science / Engineering 3+ years experience working in a manufacturing environment Excellent communication Innovative and Continuous Improvement Mindset You may not check every box, or your experience may look a little different from what we've outlined, but if you think you can bring value to Ford Motor Company, we encourage you to apply! As an established global company, we offer the benefit of choice. You can choose what your Ford future will look like: will your story span the globe, or keep you close to home? Will your career be a deep dive into what you love, or a series of new teams and new skills? Will you be a leader, a changemaker, a technical expert, a culture builder…or all the above? No matter what you choose, we offer a work life that works for you, including: Immediate medical, dental, and prescription drug coverage Flexible family care, parental leave, new parent ramp-up programs, subsidized back-up childcare and more Vehicle discount program for employees and family members, and management leases Tuition assistance Established and active employee resource groups Paid time off for individual and team community service A generous schedule of paid holidays, including the week between Christmas and New Year's Day Paid time off and the option to purchase additional vacation time. For a detailed look at our benefits, click here: ********************************** This position is a salary grade 6, 7 or 8. Visa sponsorship is not available for this position. Candidates for positions with Ford Motor Company must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. We are an Equal Opportunity Employer committed to a culturally diverse workforce. All qualified applicants will receive consideration for employment without regard to race, religion, color, age, sex, national origin, sexual orientation, gender identity, disability status or protected veteran status. In the United States, if you need a reasonable accommodation for the online application process due to a disability, please call **************. Candidates who are in commuting distance to a Ford hub location may be required to be onsite 4 or more days per week. #LI-Onsite #LI-SB7 What you will do ... Perform new or updated layout drawings to support plant engineering and maintenance projects Use software such as AutoCAD and Vault to evaluate the feasibility of designs for assembly and machining operations Advise plant team on layout standards to support Global Ford Production System and Manufacturing Engineering requirements (safety, ergonomics, flow, etc.) Maintain Sterling Plant's layout, machine, and electrical drawings in Ford's Vault drawing management system Be a knowledge resource for locating legacy drawings and prints Support efforts to improve organization of Sterling's files within Vault Act as one of the plant innovation team leaders -- lead team meetings; network with other regional innovation teams and the corporate ATP team; publicize the plant's innovation efforts. Provide support for Plant Innovation projects within the realm of 3D Printing, Digitalization, Analytics, and others. Asset management - lead the annual verification process, and manage the asset movement and financial process Lead document management process for asset transfers, disposals, equipment sales, etc. Be the Central Engineering lead for the asset MCRP audit process; provide documents and support Lead ad-hoc Plant Engineering assignments such as creating / ordering signs and displays, supporting office layout changes, plant event prep, etc. Lead 6-Sigma / DMAIC projects, to support and document continuous improvement actions. Support other plant DMAIC projects

At AAM, the POWER is in our people. We believe that an equitable and inclusive workplace benefits everyone, and that the diversity of our Associates drives creativity and innovation. Our global team is made of dreamers, doers and innovators who are Delivering POWER for a safer, brighter and more sustainable tomorrow. Job Posting Title Manufacturing Engineer Summary #TeamAAM is looking for a Manufacturing Engineer to join our Oxford Forge team in Oxford, Michigan. This is a 1st shift, fully onsite role. The Manufacturing Engineer implements manufacturing techniques, processes, tooling, and machinery to maximize throughput. They will establish control charting of critical features and processes by monitoring results and determining machine and process capabilities and performance reliability. Ready to join the team that is Bringing the Future Faster? Apply today! Job Description Manages the implementation of new processes, selection of equipment to be purchased, and time estimates. Resolves issues with design, manufacturability, or build sequences. Ensures production-part acceptance and manufacturing readiness. Develops manufacturing equipment by studying manufacturing plans and commitments; evaluating manufacturing processes and requirements. Monitors equipment installations by advising crews. Meets production requirements by designing equipment modifications as needed Prepares equipment operators by conducting training; providing reference and support resources. Maintains process integrity by developing and updating policies, procedures, methods, and guidelines. Maintains equipment records by filing documents; updating equipment database. Protects organization value by keeping information confidential; cautioning others regarding potential breaches. All other duties as assigned. Required Skills and Education Bachelor's Degree in Engineering or equivalent experience. 2-4+ years of automotive manufacturing experience. 1-2+ years of forging press experience. Capability of designing, building, and installing components. About AAM: As a leading global Tier 1 Automotive and Mobility Supplier, AAM designs, engineers and manufactures Driveline and Metal Forming technologies to support electric, hybrid and internal combustion vehicles. Headquartered in Detroit with over 80 facilities in 18 countries, we are Bringing the Future Faster for a safer and more sustainable tomorrow. To learn more, visit AAM.com. Why Join #TeamAAM: As a member of #TeamAAM, you'll get to make a difference on day one. From your first day with us, you'll have the opportunity to grow, embrace challenges, build your skills, and bring your authentic self to work every day, all while helping to shape the future of mobility for AAM…and the world. AAM will not discriminate against any Associate or applicant for employment because of age, race, color, gender, religion, weight, height, marital status, sexual orientation, genetic history or information, gender identity or expression, disability, protected veteran status, national origin, or other characteristic protected by law. AAM will take affirmative action to ensure that applicants are employed, and that Associates are treated equally during employment, without regard to their age, race, color, gender, religion, weight, height, marital status, sexual orientation, genetic history or information, gender identity or expression, disability, protected veteran status, national origin, or other characteristic protected by law. For the Disabled Job Seeker: We offer reasonable accommodations for qualified disabled individuals who are applicants for employment. To request assistance or accommodations, please e-mail *************************. AAM is an equal opportunity/affirmative action employer.

Manufacturing Engineer Job Opportunity Must-Have Qualifications: 5-7 years of experience with a bachelor's degree or 10+ years of experience without a degree Experience with CNC machining Ability to indicate a tool/part Demonstrated problem-solving capability Self-motivated and accountable Situational awareness and emotional intelligence Ability to listen to and follow direction Willingness to ask for help when needed Job Description: The Manufacturing Engineer will support production processes and machines, working as part of a team of engineers to develop and maintain manufacturing processes. Key Responsibilities: Assist machine operators with machine faults, recoveries, and setups. Document process changes to ensure clarity and consistency. Maintain engineering documentation, including control plans and tool lists. Troubleshoot and correct causes for nonconforming parts to ensure quality and efficiency. Preferred Qualifications: G-code writing capability. Experience with precision grinding and/or honing. CAM (Computer-Aided Manufacturing) experience. Typical Task Breakdown: Provide support to machine operators for resolving machine faults, performing recoveries, and setting up machines. Document any changes in processes to maintain accurate records. Ensure engineering documentation, such as control plans and tool lists, is up-to-date and accurate. Identify and correct issues causing nonconforming parts, ensuring product quality. If you meet these qualifications and are eager to contribute to the success of a dynamic production environment, we encourage you to apply for this Manufacturing Engineer position.

Job Description Responsible for activity related to engineering, cell layout and process set up for CNC, Lathe, Robodrill and Milling operations. Essential Duties and Responsibilities include, but are not limited to, the following: Work on assigned launch activity in conjunction with the Program Manager. Ensure the design of new lines are safe and meet ergonomic requirements Works closely with Operations on design and layout with the operator in mind Minimizes square footage and maximizes sales per square foot Develop thorough capital and tooling requirements for quotations of new business Approves prints and changes for new programs Completes feasibility studies on new quotations, highlights risks and works with the customer to resolve Sources capital equipment and tooling for new programs Oversee the installation and commissioning of new equipment Sets up processes to meet scrap and efficiency targets Establishes and maintains a capital and tooling budget and meets targets Ensures that the lines are launched within the approved budget Interact with the customers on launch issues, participate in customer APQP meetings Leads Run at Rate activities ensuring successful completion Maintains thorough documentation for manufacturing lines including training and job instructions Work to minimize scrap on future and existing programs Execute engineering changes as needed Update existing lines for capacity increases and VA/VE activities Maintain plant and line layout Develop and update PFMEA Work closely with quality to resolve manufacturing issues and develop control plans Write work instructions Participate in change over process Identify opportunities to speed change over processes Maintain a high level of organization Work with the team to establish 5S criteria for cells Some travel may be required to support customer locations All other duties as assigned. Supervisory Responsibilities None Qualifications / Experience / Education Agree to NETFORM Employee Handbook Pass pre-employment screening (e.g., drug test, physical, and background test) Ability to communicate effectively with co-workers Experience with Solid Works, Solid Edge, and AutoCAD Experience in Hot and Cold Forging Strong understanding of Milling and Lathe operation and programming Flow Forming experience a plus Understanding of takt time and capacity planning Understanding of automation (Fanuc, Allen Bradley, Siemens, ASE) Understanding of 5S and Lean manufacturing principles Must be innovative, dedicated to self-improvement and willing to try new things Plex Experience a Plus Bachelor's degree in engineering or related experience Salaried exempt position - 8am-5pm

Job Description The Manufacturing Engineer's primary responsibilities include evaluation of manufacturing processes by designing and conducting research programs, applying knowledge of product design, fabrication, assembly, tooling, secondary tooling, material flow racks and materials, conferring with equipment vendors, soliciting observations from operators. Reports to the Director of Quality. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. · Focus on the design and operation of integrated systems for the production of high-quality, economically competitive products. These systems may include computer networks, robots, machine tools, and materials-handling equipment. · Communicates manufacturing capabilities, production schedules, or other information to facilitate production processes. They apply continuous improvement methods such as lean manufacturing to enhance manufacturing quality, reliability, or cost-effectiveness. · Maintains current AutoCAD plant drawings and updates accordingly. · Design and procurement for material flow racks. · Institutes TAKT studies (takt time study) · Work with program team to front-load and optimize all aspects of the manufacturing process on each assigned program. · Assist the program team in the implementation of the APQP process. · Support the customer, manufacturing and quality in the launch of new programs. · Support manufacturing and quality in the resolution of customer concerns. · Responsibilities include all, but are not limited to only, those listed above. · Support and maintain compliance of IATF 16949 / ISO 9001 / ISO 14001. Follows all safety, housekeeping and company policies and procedures. Coordinates and maintains all job responsibilities in a continuous and flexible manner and performs other related duties and job assignments as required. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE Bachelors Degree or equivalent job experience in Manufacturing. Engineering / Industrial Engineering. Experience in Secondary Tooling. Minimum of three years' experience working in the automotive industry with injection molded parts and assemblies. Experience in AutoCad. Basic understanding of the injection molding process and secondary processes. Minimum of two years' experience working with GD&T. Hands on tooling and processing experience beneficial. Strong leadership and problem solving skills. Strong written and verbal communication skills. Competent PC skills (i.e. Windows, Excel, Microsoft Word, Power Point, Projects and Outlook. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, talk, hear, and walk. Occasionally bend, squat, reach, twist/turn and lift up to 50 lbs. Specific vision abilities required by this job include ability to adjust focus. Powered by ExactHire:164567

Job Description GM DOES NOT PROVIDE IMMIGRATION-RELATED SPONSORSHIP FOR THIS ROLE. DO NOT APPLY FOR THIS ROLE IF YOU WILL NEED GM IMMIGRATION SPONSORSHIP NOW OR IN THE FUTURE. THIS INCLUDES DIRECT COMPANY SPONSORSHIP, ENTRY OF GM AS THE IMMIGRATION EMPLOYER OF RECORD ON A GOVERNMENT FORM, AND ANY WORK AUTHORIZATION REQUIRING A WRITTEN SUBMISSION OR OTHER IMMIGRATION SUPPORT FROM THE COMPANY (e.g., H-1B, OPT, STEM OPT, CPT, TN, J-1, etc.). This job may be eligible for relocation benefits. Onsite: This role is categorized as onsite. This means the successful candidate is expected to report to Orion, MI on a full-time basis. The Role: Lean Material Strategy Industrial Engineer will work directly with production, engineering, and Core Teams in implementing lean manufacturing systems. They will analyze throughput data to help departments improve performance. They will be responsible to prepare standardized work for future products alongside the core team and help to launch great products. In steady state, they will drive continuous improvement projects. What You'll Do: * Coordinate problem solving activity on plant floor level with multi-department resources * Support as necessary in-plant tryouts, process changes, and implementation plans to resolve ergonomic issues * Assist in establishing operational methods and work standards using various measurement techniques * Analyze throughput data to determine plant bottlenecks then work with the floor to eliminate them * Analyze existing operations and proposes cost justified improvements * Optimize use of floor space, materials, personnel, and equipment * Assist in planning new facilities, operations and/or relocation of same * Develop time studies for job operations and initial set up of sequence material cells * Provide information for various management systems * Regular contact with others outside the work group * Monitor adherence to recommended safety procedures and good housekeeping * Recommend changes to work station, labor, and layouts to reduce waste and cost per vehicle * Work alongside Core team, manufacturing engineering team, engineering team to establish lean work station set-up including standardized work * Establish execution plans to complete the job and or/project * Attend/participate in LAUNCH activities in Warren, MI including but not limited to Meetings, Reviews, Builds * Assist in training launch follow-up team members * Support Floor Readiness for SORP Required Qualifications: * 5+ years of experience in a manufacturing or related environment * 2+ years' experience as a Material or Production Industrial Engineer * Highly developed oral & written communication skills * High level of interpersonal skills * Project management skills * High level of analytical ability * Experience creating Standardize Work * Knowledge of and experience in Standard Time Data Systems (STDS) * Knowledge of and experience in Assembly Processing Systems (APS) * Knowledge of AutoCad Preferred Qualifications: * Degree in Industrial Engineering or equivalent experience * Knowledge of and experience in GMOS * Knowledge of MGO * Knowledge and experiences in Throughput Analysis * Knowledge of computer software (Office suite and engineering software) GM does not provide immigration-related sponsorship for this role. Do not apply for this role if you will need GM immigration sponsorship now or in the future. This includes direct company sponsorship, entry of GM as the immigration employer of record on a government form, and any work authorization requiring a written submission or other immigration support from the company (e.g., H1-B, OPT, STEM OPT, CPT, TN, J-1, etc). This role is categorized as onsite. This means the selected candidate is expected to report to a specific location on a full-time basis. The selected candidate will be required to travel About GM Our vision is a world with Zero Crashes, Zero Emissions and Zero Congestion and we embrace the responsibility to lead the change that will make our world better, safer and more equitable for all. Why Join Us We believe we all must make a choice every day - individually and collectively - to drive meaningful change through our words, our deeds and our culture. Every day, we want every employee to feel they belong to one General Motors team. Benefits Overview From day one, we're looking out for your well-being-at work and at home-so you can focus on realizing your ambitions. Learn how GM supports a rewarding career that rewards you personally by visiting Total Rewards resources. Non-Discrimination and Equal Employment Opportunities (U.S.) General Motors is committed to being a workplace that is not only free of unlawful discrimination, but one that genuinely fosters inclusion and belonging. We strongly believe that providing an inclusive workplace creates an environment in which our employees can thrive and develop better products for our customers. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, national origin, citizenship status, religion, age, disability, pregnancy or maternity status, sexual orientation, gender identity, status as a veteran or protected veteran, or any other similarly protected status in accordance with federal, state and local laws. We encourage interested candidates to review the key responsibilities and qualifications for each role and apply for any positions that match their skills and capabilities. Applicants in the recruitment process may be required, where applicable, to successfully complete a role-related assessment(s) and/or a pre-employment screening prior to beginning employment. To learn more, visit How we Hire. Accommodations General Motors offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email us or call us at ************. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.

The Industrial Engineer will be responsible for direct/indirect labor and activities affecting line speed, cycle checks, scrolls and workstation assignments, change control, and line balancing. A qualified candidate will utilize Lean concepts to identify and eliminate waste as well as perform time/motion studies using MODAPTS. This position will assist the IE Manager and IE Supervisor with technical services to maintain efficient levels of Lean manufacturing and manning. The Industrial Engineer will support Stellantis Production Way (SPW) Domains as required.