Journeyman lineman jobs in Dalton, GA - 933 jobs

At Duke Health, we're driven by a commitment to compassionate care that changes the lives of patients, their loved ones, and the greater community. No matter where your talents lie, join us and discover how we can advance health together. About Duke University Hospital Pursue your passion for caring with Duke University Hospital in Durham, North Carolina, which is consistently ranked among the best in the United States. The largest of Duke Health's four hospitals with 1062 patient beds, it features comprehensive diagnostic and therapeutic facilities, including a regional emergency/trauma center, an endo-surgery center, and more. Work Week: 20 hours per week - flexible schedule General Description of the Job Class The incumbents assigned to this classification will be participants in an approved apprentice or trainee program established by DUHS. These programs have been developed in partnership with an institution of higher learning or professional organizations. They will work under the license/registry/certification of a qualified trainer for the clinical area to develop competencies for their specialized area of study. Reference the Apprenticeship/Trainee program document for specific requirements and expectations for this program. Duties and Responsibilities of this Level Goals and expectations will be clearly defined at the initiation of the program per program guidelines. Performs all responsibilities in a manner that demonstrates service excellence towards patients, physicians, peers and other departments. Assume responsibility for upholding the policies and procedure of the department and organization. The specific nature of the apprenticeship will reflect the needs of the sponsoring organization, the learning goals of the student and the needs of the healthcare institution. Through interactions with their clinical leader, apprentice's will receive mentorship and support to help their success on the engagement. Program length is typically 12 to 18 months. Required Qualifications at this Level Education High school diploma or GED equivalent plus Pre-requisite coursework (acceptance into a Radiography program) Experience Experience in a hospital or health system preferred. Required experience may vary based on program guidelines. Degrees, Licensure, and/or Certification Required Licensure, and/or Certification may vary based on program guidelines. Duke is an Equal Opportunity Employer committed to providing employment opportunity without regard to an individual's age, color, disability, gender, gender expression, gender identity, genetic information, national origin, race, religion, sex (including pregnancy and pregnancy related conditions), sexual orientation or military status. Duke aspires to create a community built on collaboration, innovation, creativity, and belonging. Our collective success depends on the robust exchange of ideas-an exchange that is best when the rich diversity of our perspectives, backgrounds, and experiences flourishes. To achieve this exchange, it is essential that all members of the community feel secure and welcome, that the contributions of all individuals are respected, and that all voices are heard. All members of our community have a responsibility to uphold these values. Essential Physical Job Functions: Certain jobs at Duke University and Duke University Health System may include essential job functions that require specific physical and/or mental abilities. Additional information and provision for requests for reasonable accommodation will be provided by each hiring department.

Title: Electrical Foreman Onsite/Office Directly supervise, manage and coordinate activities of electricians, apprentices, helpers, and temporary workers. Essential Functions Lead by example Implement quality control measures. Examine and inspect work progress, equipment, and construction sites to verify safety and to ensure that specifications are met. Prepare and provide documents such as Jobsite Safety Analysis, Jobsite Hazard Analysis and safety reports. Interpret and track project schedule to provide two-week look ahead and forecast manpower requirements based on the project goals and schedule Read specifications and blueprints to plan procedures and determine construction requirements Maintain basic computer skills Track and complete weekly time sheets. Formally manage and request materials and supplies Supervise, coordinate, and assign the activities of electricians, apprentices, helpers and temp workers Confer with management, trade partners, other departments and contractors in order to coordinate work activities and resolve problems Locate, measure, and mark site locations and placement of structures and equipment, using measuring and marking equipment Foresee any production problems and recommend solutions, such as improving production methods or implementing motivational plans. Train workers in construction methods, operation of equipment, safety procedures, and company policies Meet all requirements as an electrician and perform the work normally assigned to electricians Benefits Company Vehicle Health insurance SEP retirement Paid time off Vision insurance Health savings account Dental insurance Life insurance 4x10 Monday-Thursday work schedule Education, Training and Certifications High School Graduate or General Education Degree (G.E.D) 4-10 years related experience or equivalent knowledge and experience Working Conditions Use of Personal Protective Equipment (PPE) is required (Hard hat, vest, protective eyewear, safety boots.) Work is performed indoors and outdoors, often exposed to the natural elements of cold, heat, moisture, and wind. Must be physically able to repetitively lift and carry at least 50 LBS on a regular basis. Must comply with the company's drug and alcohol testing requirements and background screening process. Equal Opportunity Employer Statement We are an Equal Opportunity Employer and are committed to providing a workplace free from discrimination. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, veteran status, or any other legally protected status. Employment decisions are based on merit, qualifications, and business needs.

Now Hiring - Maintenance Electrician (day shift) - Huntsville, AL Pay Range: $31 - $34/hr You @ BASF ECMS At BASF ECMS, you get more than just compensation, Medical & Dental. Our total offer includes a wide range of elements you need to be your best in every stage of your life. Our benefits include some additional perks below for starters... Retirement Benefits with company contributions Competitive Medical and Dental Plan Options Disability and Life Insurance Programs Wellness Programs Maternity/Paternity Leave, Infertility & Adoption reimbursement Mentoring & Development Programs Employee Discounts Pet Insurance As a Maintenance Electrician you will... Install, troubleshoot and/or repair plant electrical equipment which will include but not be limited to: Interior and exterior lighting (120V, 277V, 480V) Electrical distribution & motor control systems up to 480V AC Three phase motors up to 480V Control circuits and equipment (PLC's, sensors, etc) utilizing voltages of 24VDC or 120VAC. Assist contractor services with maintenance of plant fire and security systems. Install necessary conduit, wiring and industrial electrical components. Perform and ensure integrity of Preventative Maintenance (PM's) on applicable sitewide electrical equipment. Gather and analyze technical data and recommend needed repairs or modifications on production electrical equipment. Update electrical drawings for equipment modifications. (ie. red line drawings). Establish or modify work procedures including PM's to meet the demands of the site. Make recommendations to improve maintenance and production operations. Create corrective work notifications in SAP for all production equipment. Qualifications: High School Diploma or GED with 5 years commercial or industrial (preferred) electrical experience OR Associate/Technical degree or apprenticeship completion in a related Industrial Electrical Maintenance field . Experience in operating aerial manlifts & working at heights up to 50'. Experience in the fabrication and installation of galvanized rigid conduit. Proficiency using a digital multimeter. About BASF Environmental Catalysts and Metal Solutions Leveraging its deep expertise as the global leader in catalysis and precious metals, BASF Environmental Catalysts and Metal Solutions (ECMS) serves customers in many industries including automotive, aerospace, indoor air quality, semiconductors, and hydrogen economy, and provides full loop services with its precious metals trading and recycling offering. With a focus on circular solutions and sustainability, ECMS is committed to helping our customers create a cleaner, more sustainable world. Protecting our elements of life is our purpose and this inspires us to ever-new solutions. ECMS operates globally in 15 countries with approximately 20 production sites and over 4,000 employees. What are you waiting for? Click Apply now to BELONG@BASF!! BASF takes security & data privacy very seriously. We will never request financial information of any kind via email, private text message or direct message on any social medial platform or job board. Furthermore, we will never send a candidate a check for equipment or request any type of payment during the job application process. If you have experienced any of the above, please contact [email protected] to report fraud. BASF is committed to pay transparency practices. The competitive Pay Rate for this role is $24 - $32/hr. Actual pay will be determine based on education, certifications, experience, and other job-related factor permitted by law. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status.

Foreman / Senior Electrician (Commercial New Construction) Job Type: Full-time About the Role We are hiring an experienced Foreman / Senior Electrician to lead crews on large-scale commercial new construction projects. This is a hands-on field leadership role responsible for safety, quality, productivity, and crew coordination. Key Responsibilities Crew Leadership Supervise journeymen, apprentices, and helpers Assign daily tasks, manage manpower, and adjust sequencing to meet schedules Mentor apprentices and enforce jobsite rules and professional conduct Work Planning & Execution Plan and layout work using drawings and field conditions Coordinate with other trades to prevent conflicts Lead daily huddles and task planning meetings Track progress and resolve field issues proactively Technical Oversight Oversee installation of commercial electrical systems, including: Conduit (EMT, rigid, PVC) Switchgear, panels, and transformers Lighting and lighting controls Fire alarm systems (as applicable) Feeders, branch circuits, grounding, and underground work Ensure compliance with NEC, project specs, and quality standards Support inspections, punch lists, and project closeout Safety & Coordination Enforce OSHA and jobsite safety policies Conduct pre-task planning and safety briefings Serve as on-site electrical contact with inspectors and other trades Communicate manpower needs and progress updates to leadership Materials & Documentation Forecast material needs and coordinate deliveries Monitor labor productivity Complete daily reports, timecards, and progress documentation Qualifications 10+ years of commercial electrical construction experience 2+ years as a Foreman or Lead Electrician Strong knowledge of NEC and commercial electrical systems Ability to read blueprints, one-lines, and schematics Valid driver's license and reliable transportation Ability to pass background check and drug screening Physical Requirements Work from ladders, lifts, and elevated positions Lift up to 75 lbs Frequent standing, bending, kneeling, and reaching

A Snapshot of Your Day Join Siemens Energy as you take on the vital role of repairing and maintaining CNC machinery, Manual Controlled machinery (NC), and instrumentation. Imagine ensuring that our plant equipment operates at peak efficiency with minimal downtime. You will engage with complex electrical, hydraulic, pneumatic, mechanical, and lubrication systems, diagnosing and correcting performance issues. Your expertise will help keep our machinery in optimum condition, contributing to our mission of delivering reliable energy solutions. How You'll Make an Impact You will diagnose and resolve equipment performance issues across complex electrical, hydraulic, pneumatic, mechanical, and lubrication systems. Perform electrical preventative maintenance (PMs) using provided check-sheets, setting alignment checking methods, evaluating data, and coordinating necessary adjustments. You will install, repair, test, and calibrate intricate AC and DC electrical systems, including motor-starting circuits, AC magnetic circuits, pilot device systems, pressure and limit switches, and solenoid valves. Determine replacement parts and submit material requisitions to ensure seamless operations. What You Bring You have passed the Electrician A Test, showcasing your technical proficiency. Demonstrate a solid understanding of Siemens 840D and Step 7 or Fanuc controls. Familiarity and training in Lockout/Tagout (LOTO) procedures and high voltage systems. You bring a minimum of 3 years of electrician experience to the team. A High School Diploma or equivalent experience is required, with additional relevant military or school training accepted. Your vision is correctable to 20/40, and you can lift more than 25 pounds while passing a hearing test and a Career Readiness/Work Keys Certificate - Silver Status is required. Applicants must be legally authorized for employment in the United States without need for current or future employer-sponsored work authorization. Siemens Energy employees with current visa sponsorship may be eligible for internal transfers. Offers of employment are contingent upon successful completion of a criminal background check, pre-employment drug screen, and any other test(s) required for the role. About the Team Gas Services Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: Rewards Career growth and development opportunities Supportive work culture Company paid Health and wellness benefits Paid Time Off and paid holidays 401K savings plan with company match Family building benefits Parental leave #HIREOPGN Equal Employment Opportunity Statement Siemens Energy and Siemens Gamesa Renewable Energy is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. California Privacy Notice California residents have the right to receive additional notices about their personal information. Click here to read more .

At Dow, we believe in putting people first and we're passionate about delivering integrity, respect and safety to our customers, our employees and the planet. Our people are at the heart of our solutions. They reflect the communities we live in and the world where we do business. Their diversity is our strength. We're a community of relentless problem solvers that offers the daily opportunity to contribute with your perspective, transform industries and shape the future. Our purpose is simple - to deliver a sustainable future for the world through science and collaboration. If you're looking for a challenge and meaningful role, you're in the right place. About You and this role We are seeking candidates for exciting and rewarding Process Technician Apprenticeship opportunities available at our facility in Knoxville, TN within the U.S. Apprenticeship Program. As part of the U.S. Apprenticeship Program, Apprentices participate in a 2-3 year program offering hands-on work experience in our chemical plants while attending community college to earn a company-paid Associate's degree. During the program, Apprentices will be offered paid tuition, wages, and some benefits. Upon successful completion of the program, Apprentices will have earned an Associate's Degree in one of several technical disciplines. Apprentices will report to an Apprenticeship Program Leader who will support the Apprentice throughout the apprenticeship program. Apprentices who successfully complete the program will also be highly considered for a job within the company. Individuals selected to fill an available Apprentice opening will be required to sign an offer letter that will commit them to working for Dow for 2 years upon being offered a full-time position. The hourly rate of pay for this role will be at least $22.62. The exact pay rate will be communicated if you are chosen to receive an offer of employment. The hourly pay rate is set by the Company and is non-negotiable. Expected hire date for these opportunities is June 8th, 2026; but it could go onto August 3rd, 2026 at the latest. Responsibilities Process Technician Process Technicians operate equipment in assigned areas of the plant and perform operations related activities per the work process. They utilize chemical manufacturing knowledge and experience to operate and troubleshoot the plant in a safe and efficient manner. Primary Responsibilities and Key Skills Routine operation of basic control systems and devices to monitor levels, temperatures, pressures and flow rates, and transfer of products. Controlling, monitoring and adjustment of all control systems and manually operated equipment. Properly lifting hoses, bolt flanges and operate valves and similar equipment including the proper clearing and isolation of equipment. Following operating discipline, procedures, and practices to ensure a safe and efficient operation of assigned duties. Troubleshoot process, product quality, safety, and environmental problems, and identify equipment requiring maintenance. How to perform maintenance and project work safely and efficiently. Clearing and tagging equipment as required and issuing Safe Work Permits for maintenance and project work. Performing all duties with a high degree of dedication to safety and environmental stewardship. Qualifications Educational Requirements A minimum of a High School Diploma or GED is required. Individuals who are currently enrolled in high school or college or have graduated or received a GED within the last two years will be required to provide official transcripts/GED scores prior to being invited to an onsite interview. Must have completed Algebra or Technical Math and Science coursework in High School, per graduation requirements. Completion of Chemistry and / or Physics coursework in High School is preferred. After an offer of employment, but prior to date of hire, must complete college entrance exams / assessments at the community college to be attended. Must not be required to take any remedial or transitional coursework. If already enrolled in the degree program related to the field you applied for or have credits that would transfer toward it, individual must have no less than 2 full semesters remaining toward the applicable degree. Preferred educational qualification: minimum GPA of 2.500 out of 4.000 if you are currently enrolled in high school or college OR you have graduated from high school or college or obtained a GED within the last 2 years Additional Requirements Must be 18 years or older on or before your start date. Must have a current, valid US driver's license or the ability to obtain prior to your start date. Please note that before being cleared to report to work, you will be required to successfully complete a Motor Vehicle Records check to verify the status of your driver's license. Be able to work all applicable shifts on a rotating basis (including weekends & holidays) and work overtime, when needed. A minimum requirement for this U.S. based position is the ability to work legally in the United States. No visa sponsorship/support is available for this position, including for any type of U.S. permanent residency (green card) process. Preferred Skills Active Learning: Demonstrate a strong willingness to learn and actively participate in training programs to gain a thorough understanding of manufacturing processes, safety protocols, and quality standards. Time Management: Effectively manage time to ensure completion of tasks and upholding to production schedules, while maintaining high standards of quality and safety. Enthusiasm for Learning: Proactively seek opportunities to learn new skills and improve existing ones, demonstrating initiative and a commitment to continuous improvement in manufacturing processes and techniques. Troubleshooting (Problem-Solving): Skills in identifying and resolving processes, product quality, safety, and environmental issues. Mechanical Aptitude: Ability in handling equipment and performing maintenance tasks. Environment Health and Safety: Commitment to performing duties safely and with environmental responsibility. Communication: Coordinating with co-workers and other team members effectively. Physical Demands Willing and able to meet physical demands of the job, with or without reasonable accommodations: Lift 50 pounds, lift hoses, bolt flanges and operate valves and similar equipment routinely. Climb ladders/stairs and work at heights. Work in tight or closed-in spaces. Must be able to wear and use personal protective equipment (PPE), including harnesses with a total weight capacity of 300lbs. Work comfortably and safely at elevated heights. Candidates must be familiar with, or willing to undergo training in, the proper usage and maintenance of safety equipment to ensure safe movement and operations at heights. Additional Notes: Relocation assistance is not provided. About Dow Dow (NYSE: DOW) is one of the world's leading materials science companies, serving customers in high-growth markets such as packaging, infrastructure, mobility and consumer applications. Our global breadth, asset integration and scale, focused innovation, leading business positions and commitment to sustainability enable us to achieve profitable growth and help deliver a sustainable future. We operate manufacturing sites in 30 countries and employ approximately 36,000 people. Dow delivered sales of approximately $43 billion in 2024. References to Dow or the Company mean Dow Inc. and its subsidiaries. Learn more about us and our ambition to be the most innovative, customer-centric, inclusive and sustainable materials science company in the world by visiting ************ As part of our dedication to inclusion, Dow is committed to equal opportunities in employment. We encourage every employee to bring their whole self to work each day to not only deliver more value, but also have a more fulfilling career. Further information regarding Dow's equal opportunities is available on ************ Dow is an Equal Employment Opportunity employer and is committed to providing opportunities without regard for race, color, religion, sex, including pregnancy, sexual orientation, or gender identity, national origin, age, disability and genetic information, including family medical history. We are also committed to providing reasonable accommodations for qualified individuals with disabilities and disabled veterans in our job application procedures. If you need assistance or an accommodation due to a disability, you may call us at 1-833-My Dow HR (833-###-####) and select option 8.

Class A Lineman - Transmission (High Voltage / Skilled Trades) Job Type: Full-Time Compensation: $45 - $50 per hour Experience Level: 5+ Years (Class A) Join an essential team where your skills power the nation. Join one of the leading providers of engineering and construction solutions with a legacy of excellence for 80+ years. We value Safety, Integrity, and Innovation. When you join us, you're joining a supportive, team-oriented culture that recognizes your hard work and provides the stability of a non-union environment with a nationwide footprint. The Opportunity As a Class A Transmission Lineman, you will be at the forefront of constructing, maintaining, and repairing the high-voltage systems that keep our world running. This is a high-impact, skilled position where you will lead crews, solve complex problems, and work with cutting-edge high-voltage equipment. Key Responsibilities & Impact Lead the Way: Confidently lead crew members in the absence of the Foreman, ensuring a productive and safe work environment. Transmission Expertise: Safely perform new construction, maintenance, or repair on both energized and de-energized transmission systems. High-Voltage Skill: Work with energized high-voltage systems, showcasing the care and skill needed to protect lives. Technical Operations: Execute stringing of overhead wire, setting poles/anchors, and troubleshooting transmission issues. Advanced Linework: Proficiently sag wire, lead structure erection at all heights, and execute hot line work on conductor systems. Equipment Mastery: Operate digger derricks, puller and tensioner setups, and manage all aspects of heavy lifting and rigging. Mission-Critical Tasks: Perform reconductoring, bucket rescues, and safely install/remove mechanical jumpers. What You Bring to the Team (Requirements) We are looking for dedicated professionals who meet the following standards: Experience: A minimum of 5 years of recent field experience in transmission linework. Safety Focus: A steadfast commitment to following Company safety rules, policies, and conducting pre-job/tailgate briefings. Technical Proficiency: Ability to identify primary and secondary voltage and read blueprints. Knowledge of grounding procedures, minimum approach distances, and flag/tag procedures. Ability to use phasing sticks and understand one-shot reclosers. Familiarity with induced voltage and hot stick work. Physical Excellence: Able to perform rigorous physical labor, climb various structures (wood, steel, etc.), and lift over 50 lbs. Licenses & Mobility: Must possess or be able to obtain a Commercial Driver's License (CDL) permit within 60 days (CDL preferred). Willingness to travel long distances on short notice and work in various locations/states. Willingness to work weekends, holidays, and overtime as requested. Core Competencies: Team-oriented, self-motivated, customer-focused, and an effective communicator. Work Environment & Physical Demands You'll work in a dynamic, high-paced outdoor environment where no two days are the same. You will frequently work at heights and in inclement weather, maintaining company vehicles and tools in top condition. This role requires regular standing, walking, and manual dexterity to handle specialized PPE and rubber goods. Ready to Power Your Career? Apply today to become part of our family-where your safety is our priority and your expertise is valued! Compensation and Benefits Competitive hourly pay: $45 - $50 per hour, based on experience. Comprehensive health, dental, and vision insurance. Company-paid life insurance and long-term disability coverage. 401(k) plan with employer contributions. Paid time off and paid holidays. Per diem and travel reimbursement for remote projects. Training and development opportunities through nationally recognized programs. Cell phone allowance or company-provided phone. Clear career advancement paths within a respected and growing organization.

" **Job Title: Experienced Fiber Journeyman Lineperson** This positionassists with installation, operation, maintenance and repair of overhead fiber lines and systems. **Pay: Competitive/Hourly (more detail during your interview process)** **Benefits** : + Health/Dental/Vision Insurance + Short/Long Term Disability + Matching 401(k) Plan + Paid Holidays and Vacation + FR Clothing Provided + Employee Payroll Deduction Program **Essential Functions & Responsibilities:** + Assists in the construction, operation, maintenance and repair of distribution, substation facilities and systems including reconductoring existing lines. + Attend to service calls concerning power outages and electrical problems. + Receives training both in book/classroom skills and on the job skills. Must continue to pass ongoing training to proceed to higher skill/job levels. + Work will be performed at varying heights above ground, in manholes, and/or in confined spaces. + Operates motorized equipment, use hand tools, and perform routine maintenance on + electrical equipment, machinery, and tools. + Follows safety guidelines as part of training. + Stocks and services vehicles to be equipped to respond to emergency situations. + Works nights, weekends, and holidays for extended periods; required to perform duties as part of recovery force during emergencies and disasters. **Minimum Qualifications:** + Must be 18 years of age or older. + Possess problem-solving mental cognition. + Able to: + work with hands above head for extended periods of time. + walk, climb, and work from ladders, or at various heights, on uneven and slippery surfaces, performing mentally/physically demanding work under unfavorable weather conditions while handling equipment or material. + meet and maintain weight restrictions for bucket truck and all other existing equipment as identified by manufacturer. + work efficiently and effectively from heights. + identify the hazards on the job. + climb a power pole using climbing hooks and belt. + drive all vehicles assigned to the line crew, operate digger derrick to set poles, and use jackhammer, etc. + work long hours and overtime during holidays, emergencies, weekends, etc. Subject to call out work. **Education & Experience** + Journeyman Lineperson Certification required. **Pre-Screen** + Upon offer, employees may be required to complete and pass a pre-employment drug screen, background, and/or MVR check. **License & Certifications:** + Valid commercial driver's license (CDL) required. **Travel Requirements:** + Responds to emergencies during holidays, weekends and national disasters. + May require travel away from show up area **Physical Requirements:** + **OCCASIONAL** (up to 33%): Sitting, Kneeling, and Crawling + **FREQUENT** (up to 66 %): Stooping, Squatting, Body Twisting, Manual Dexterity, Reading, Climbing Ladders, Climbing On/Off Truck, Climbing Poles, Gripping, and Climbing Stairs + **CONTINUOUS** (up to 100%): Standing, Walking, Sense of Touch, Speaking Clearly, Seeing Distant, Seeing, Reaching, Range of Motion, Hearing-Speech Range, Depth Perception, Color Vision, Lifting, Carrying, Pushing, Pulling, Lifting Over 10 lbs. to 50 lbs., Balancing, Lifting Up to 10 lbs., and Lifting Up to 50 lbs. Individuals with a disability who desire a reasonable accommodation can contact the ADA Coordinator by calling ****************** . We partner with the Department of Homeland Security/U.S. Customs and Immigration Service to e-Verify all newly hired employees. " **Benefits** We offer a competitive range of benefits to support our employees' health, well-being, and financial security. Medical, dental, and vision benefits are available to all eligible employees on the first day of employment. For more information on the benefits available for this role, please contact the recruiter or hiring manager. **Individuals with a disability who desire a reasonable accommodation can contact the ADA Coordinator by calling **************. We partner with the Department of Homeland Security/U.S. Customs and Immigration Service to e-Verify all newly hired employees.** **An Equal Opportunity Employer.** **Please note:** + _All job offers are subject to pre-employment drug screening and a background check._ + _Unless otherwise noted, we do not sponsor employees for work authorization in the U.S. for this position._ **Notice to Agencies:** We only accept resumes from recruiters, employment agencies, or staffing services if a Service Agreement has been signed and we have requested recruitment/staffing services for the specific position. Any unsolicited resumes will become the property of the company, and no fees or compensation will be paid to the recruiter, employment agency, or staffing service.

Requirements Must have at least 6 years of line experience. Must know the direction of line feed and be able to switch circuits in emergencies. Must be able to perform work on de-energized or energized lines. Must be able to work with hot line tools. Must be able to terminate connections in meter bases, secondary pedestals, and transformers. Installing grounds, secondary blocks elbows and primary splices in transformers. Must be able to Perform and practices pole top rescue. Must be able to Perform and practices aerial bucket rescue. Must possess and maintain a valid Class A Commercial Driver's License. Physical Requirements: Ability to lift and carry heavy materials, tools, and equipment (up to 50 pounds or more). Must be able to traverse irregular and steep terrain. Endurance to perform physical tasks throughout the workday, including bending, stooping, kneeling, and standing for extended periods. Agility and flexibility to navigate construction sites and access work areas, including climbing ladders and scaffolding. Must be able to position one-self to work in confined spaces such as trenches, pits, manholes, and tunnels. Must be able to wear personal protective gear most of the day. Must be able to work in a variety of weather conditions. Must have manual dexterity, a good sense of balance, and excellent hand-eye coordination. Cinterra provides equal employment opportunities without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Assists other line personnel in connection with construction, maintenance, and repair of the electric system. A class C lineman must already understand and be able to perform the required functions of an apprentice lineman. Work involves moderate physical exertion, heavy lifting, and exposure to inclement weather, as well as the hazardous conditions of working with high voltage energized lines and equipment. JOB SPECIFIC REQUIREMENTS Must possess a minimum of one (1) years of experience performing overhead electric line construction, or completion of formal lineman training program. Must possess, and maintain a valid class A CDL and DOT medical card, and be able to remain insured as a driver by the group liability policy for the fleet. Must be able to work from elevated heights utilizing various methods, to include, but not limited to, bucket trucks and pole climbing tools. Must be able to physically perform all assigned tasks. EDUCATION REQUIREMENTS Must possess at a minimum, a high school diploma, or its equivalent. JOB SPECIFIC DUTIES Must be able to assist with preparing, and conducting a pre-job briefing and Job Hazard Analysis (JHA). Must be able to interpret maps, specifications, staking sheets, and complex diagrams, with minimal assistance. Will assist in the training of apprentice linemen. Ability to assist first class lineman, or higher, with all line work according to safety standards and regulations. Must be able to work days, nights, weekends, and holidays, and be available 24/7 to address unplanned outages or activities. Must possess good judgment, safe work methods, and ability to work well with diverse groups of people. Must be willing to work away from home, for potentially long periods of time, as required, to include storm restoration. SUBSTANCE ABUSE TESTING This position is subject to Department of Transportation (DOT) Federal Motor Carrier Safety Administration (FMCSA) drug and alcohol testing. Personnel in this position must comply with, and successfully pass, a pre-employment screening, as well as, random drug and alcohol testing.

The City of Fairburn is seeking a qualified, highly skilled Senior Electric Lineman that can perform work in the installation, maintenance, alteration and repair of overhead electrical lines, underground cables, electrical substations, and related electrical equipment. Local government or electric utility experience is a plus. Reports to the Electric Superintendent. ** The City of Fairburn will be offering a hiring incentive for the Electric Lineman position** Hiring Range: $30.67 - $33.74 Hourly Rate (Depending on qualifications) Work Days/Hours: Monday - Friday 7:00 a.m. - 4:00 p.m.; may be required to work emergency power outages and in an on call rotation. Posting Start: 10/8/2025 Posting End: open until filled JOB SUMMARY The Senior Electric Lineman is responsible for the installation, maintenance and repairs of the electrical system in the City of Fairburn. ESSENTIAL JOB FUNCTIONS Climbs power poles and steel towers, splicing and making repairs to energized lines. Constructs new overhead lines, setting poles, installing cross arms and brackets, stringing wire, and placing equipment such as transformers, switches, cut-outs, lightning arrestors and insulators. Performs switching operations as a member of a line crew. Runs new service lines from pole or transformer to consumer's premises. Reconstructs existing lines and related fittings. Phases out and cuts in new circuits; pulls slack out of primary and secondary wires; tests poles, lines and other facilities. Trims trees to clear wires. Installs, maintains and repairs electrical underground distribution equipment such as conduit duct systems, boxes, and vaults, switches, capacitors, transformers, street lights, concrete foundations. Installs electrical cable in ducts or direct burial; installs cable risers; splices and terminates non-leaded high voltage cables Drives trucks and operates associated equipment as assigned; assists in the instruction and training of other new crew members in techniques of the trade. Responds to emergency calls during hurricanes, inclement weather, or other emergency situations. Serves as crew leader as required, completing the necessary paperwork (material forms, time sheets, etc.) and preparing, reading and/or interpreting construction prints and work requests. Installs, removes or repairs the following equipment on energized or de-energized lines in all types of weather conditions; anchors, cross-arms, insulators, brackets, capacitors, regulators, poles, switches, lightning arrestors, grounds, transformers (overhead and underground primary, secondary and services) URD switchgear, LBC cabinets, manholes, splices boxes and fuses. Switches, tags, tests and grounds overhead and underground electrical systems. Writes switching orders, performs and directs sub-station and field switching operations. Phases out and cuts in new circuits; pulls slack out of primary and secondary wires; tests poles, lines and other facilities. Installs, maintains and repairs electrical underground distribution equipment such as conduit duct systems, boxes, and vaults, switches, capacitors, transformers, street lights, and concrete foundations. Trims trees to clear wires. Drives trucks and operates associated equipment as assigned; assists in the instruction and training of other new crew members in techniques of the trade. Performs other related duties as assigned. Qualifications QUALIFICATIONS Education and Experience: High school diploma or GED and three-year apprenticeship program; supplemented by five (5) years of related experience; or any equivalent combination of education, training, and experience which provides the requisite knowledge, skills, and abilities for this job. Licenses or Certifications: Valid Class B CDL driver's license required. Class A CDL license preferred or the ability to obtain a Class A license within one year of employment. Integrated Transmission System Operator Certificate Special Requirements: Requires an acceptable general background check to include a local and state criminal history check, and a valid driver's license with an acceptable driving record. Requires pre-employment medical evaluation and satisfactory results from a pre-employment alcohol and controlled substance testing in accordance DOT federal regulations. This position is deemed safety-sensitive and is subject to random alcohol and controlled substance testing. Knowledge, Skills and Abilities: Knowledge of basic arithmetic operations. Knowledge of methods, tools, equipment and materials used in electrical installation and repair work and/or in the construction and maintenance of electrical distribution and transmission lines. Knowledge of safety practices and regulations applying to low and high voltage electrical wires. Knowledge of pertinent first-aid principles and techniques including resuscitation methods. Ability to perform electrical installation and repair work and construct and maintain electric distribution and transmission lines. Ability to think and act quickly and appropriately in emergencies. Ability to work from electrical plans and detailed drawings. Ability to communicate clearly and effectively in English in person and over the phone. Ability to train and supervise others. Ability to develop and maintain effective working relationships with those contacted in the course of work. Ability to use protective clothing and equipment such as masks, coats, vests, hard hats, boots, goggles, gloves, reflective vest and other safety devices. Ability to operate or learn to operate personal computer hardware and software associated with UPC locate activities. Skill in use of operating hand and power tools, vehicles, and related light & medium duty equipment in a safe and efficient manner. PHYSICAL DEMANDS The work is moderate work which requires exerting up to 50 pounds of force. Work requires regular and, at times, sustained performance of moderately physically demanding work, typically involving some combination of climbing and balancing, stooping, kneeling, crouching, and crawling, and that may involve the lifting, carrying, pushing, and/or pulling of moderately heavy objects and materials. Some tasks require the ability to perceive and discriminate colors or shades of colors, sounds, depth, texture, and visual cues or signals. Tasks require the ability to communicate orally. WORK ENVIRONMENT Work is performed in an outdoor environment. Performance of essential functions may require exposure to adverse environmental conditions, such as dirt, dust, pollen, odors, wetness, humidity, rain, fumes, temperature and noise extremes, machinery, vibrations, electric currents, traffic hazards, toxic agents, disease, or pathogenic substances. May be required to work outside regularly scheduled hours and be available for emergency and/or pre-arranged work when called upon. The City of Fairburn is an Equal Opportunity Employer. To perform this job successfully, an individual must be able to perform the essential job functions satisfactorily. In compliance with the American Disabilities Act (ADA) reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential job functions. Prospective and current employees are encouraged to discuss accommodations with the employer.

Job Title: Distribution Apprentice A Crew Foreman Job Classification: Full Time / Non-Exempt Company: Electra Grid Solutions electragridsolutions.com The Distribution Apprentice A is responsible for assisting experienced linemen in the installation, maintenance, and repair of overhead and underground power distribution systems. This is the first step in a multi-level apprenticeship designed to develop knowledge, skills, and safe work practices under the supervision of experienced Journeymen. The role provides hands-on learning and practical training in the utility field. Job Duties and Responsibilities * Work safely on the construction, maintenance, and repair of energized and de-energized power lines * Assist in setting poles and anchors by safety and technical specifications * Maintain company vehicles, tools, and equipment in clean, working condition * Learn to identify and work with distribution voltages and understand induced voltage * Learn to read blueprints and assist in identifying structural or equipment issues * Work productively from aerial devices and at heights under supervision * Assist in assembling and erecting poles of varying heights and configurations * Participate in framing and setting pole structures, including work on de-energized poles * Assist in installing various line hardware and compression connections * Learn and follow correct procedures for PPE use and inspection of rubber goods and cover-up * Climb wood and steel poles/structures safely with proper tools and technique * Understand and perform basic knot-tying and the use of hand lines * Learn proper grounding procedures and minimum approach distances * Understand material types and equipment setup principles used in line work * Function effectively within a crew and demonstrate willingness to learn from others * Practice flagging and tagging procedures as instructed Job Requirements * High School Diploma or GED required * Valid Class A CDL required to be maintained while in position (or ability to obtain within 90 days) * Must pass drug, alcohol, background, MVR, and clearinghouse checks upon hire and continuously while in position * Must pass a DOT physical examination * A basic understanding of electrical distribution systemsis preferred * First Aid and CPR certification preferred (or ability to obtain) * Must be safety-conscious and willing to follow all company safety protocols * Able and willing to travel long distances on short notice * Able and willing to work extended hours, including overtime and weekends * Able and willing to work in all types of weather, including inclement conditions * Demonstrates strong work ethic, attention to detail, and eagerness to learn * Effective communication and team collaboration skills * Professionalism, integrity, and willingness to take initiative Physical Requirements * Must be able to lift and carry up to 50 pounds frequently * Ability to bend, climb, kneel, stoop, and stand for extended periods * Must be able to climb poles, ladders, and steel structures using proper equipment * Must be able to work at heights and in confined spaces * Frequent repetitive use of hands, wrists, and fingers for handling tools and materials * Visual acuity is required for identifying materials, reading instruments, and performing work with precision * Must be able to wear and operate personal protective equipment (PPE) for long periods * Capable of working outdoors year-round in all weather conditions * Able to perform physically demanding labor for extended hours, often under stressful or hazardous conditions Working Conditions * Work performed outdoors in all types of weather conditions * Exposure to electrical hazards, construction environments, and elevated work platforms * Travel required to various job sites, including occasional overnight stays * Extended work hours, including early mornings, late evenings, and weekend shifts as needed Key Attributes * Self-Motivated - Takes initiative and responsibility for safety and quality. * Team-Oriented - Works cooperatively with others in a crew setting. * Customer-Focused - Acts with professionalism and respect. * Safety-Minded - Adheres to safety protocols and uses PPE properly. Additional Notes This job description is not intended to be all-inclusive. Employees may be required to perform other duties as necessary to meet the ongoing operational needs of Electra Grid Solutions. Join Our Team Electra Grid Solutions is committed to safety, excellence, and empowering energy infrastructure. If you're a hardworking individual who thrives in outdoor environments and values teamwork, we encourage you to apply today. electragridsolutions.com

Forever On! From the start in 2008, T5 has been focused on supporting enterprise and hyperscale customers with customized data center solutions. Today, we remain dedicated to an unrivaled level of quality that extends across the lifecycle of the core data center ranging from customized turnkey development, facilities management and data center operations to customized construction needs worldwide!The world's biggest companies trust T5 with their data center operations. At T5, our success is fueled by our team. With over 400 engineers, technicians and professional staff, we're proud to foster an inclusive culture of excellence and progression that's dedicated to serving our customers.Commitment to Diversity & Military VeteransBattle-Tested Leadership Experience100% Data Center FocusedOwner-Operator Mindset Job Description:The Journeyman should be a outside linemen, inside wiremen, installer technician, electrician, or Master Electrician who has been engaged at the trade for at least five (5) years. The Journeyman will be responsible for performing journey-level electrical duties in the diagnosis, maintenance and repair of electrical equipment. RESPONSIBILITIESLighting PMsBattery PMs Rack moves, deployments, and decommissioning Security gate repair Inverter testing on battery backups for lights Team scheduling and material requisition Receptacle panel installations and retrofits MTS board validations, actuation, and installation Electrical Panel SchedulesSpill Prevention kits for Generators, Substations, etc.Heat trace annual testing and installation/retrofits Electrical project support Willpower issues (Nonscheduled, high priority work); Usually DC floor related issues related to cooling Qualifications:EDUCATION OR EQUIVALENT EXPERIENCEAt least five (5) years of experience in the trade Unlimited Electrical or Contractor's license (required) Formal training in approved vocational schools in the fundamentals of the trade Additional Information:PHYSICAL REQUIREMENTSThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to stand, walk, sit, climb, and balance Ability to stoop, kneel, crouch and crawl using both arms and legs Ability to pick-up minimum 60 lbs.Ability to reach with both hands and arms Ability to grasp, push, and pull objects Ability to smell, talk and hear Ability to use hands and arms to reach, handle, feel, and type Ability to see at close and distance ranges and the ability to see and correctly distinguish color Ability to work inside and outside All your information will be kept confidential according to EEO guidelines. T5 Data Centers is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

About Us Carolina Power and Signalization, a Quanta Services Inc. company, is headquartered in Fayetteville, NC. Since its founding in 2008, it has rapidly become the leading utility company in the Carolinas. Our success is driven by our employees, whose dedication and expertise set the standard for excellence in every project we undertake. We attract top-tier talent committed to achieving exceptional results. At Carolina Power and Signalization, we take on the most challenging and complex projects, hiring individuals who thrive in demanding and dynamic environments. About this Role The Lineman for Carolina Power & Signalization is responsible for performing a variety of electrical construction and maintenance tasks related to generating stations, transmission/substation, and distribution lines. Additional duties may be assigned as needed. What You'll Do Responsibilities: * Troubleshoot electrical lines and equipment. * Installs and removes electrical conductors, and places and removes transformers. * Performs all maintenance tasks from Groundman to Class C Lineman levels. * Provides support to Class A Linemen and assists in completing their duties. * Conducts routine line work with minimal supervision. * Demonstrates thorough knowledge and skills to perform live maintenance on high voltage lines. * Functions as a subordinate crew member. * Communicates effectively with property owners and the public. * Adheres to all safety rules while working on electrical equipment. What You'll Bring Experience: * 3 to less than 4 years in overhead line construction. * Proficiency in electrical terminology specific to line work. * Must supply personal tools. * Must hold a valid driver's license and DOT card. * Must maintain a safe driving record. * Must effectively communicate with management and subordinates. What You'll Get As a Quanta Services employee, you'll be offered a wide range of benefits to fit your needs. Benefits: * 401(k) with company match (Traditional & Roth available) * Paid Holidays and PTO * Medical, Dental, Vision * Additional Voluntary benefits available * Employee Discounts Equal Opportunity Employer All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, national origin or ancestry, sex (including gender, pregnancy, sexual orientation, and/or gender identity), age, disability, genetic information, veteran status, and/or any other basis protected by applicable federal, state or local law.We are an Equal Opportunity Employer, including disability and protected veteran status. We prohibit all types of discrimination and are committed to providing access and equal opportunity for individuals with disabilities. For additional information or if reasonable accommodation is needed to participate in the job application, interview, or hiring processes or to perform the essential functions of a position, please contact us the Company's Human Resources department.

Job Description Transmission Lineman 1 Class Transmission 1 Class Lineman is a skilled position in the construction, maintenance and repair of transmission lines. This position works at various locations and may also be required to travel to another state depending on customer demands. Responsibilities/Duties/Knowledge: · Capable of leading crew members in the absence of the Foreman · Installs transformers, lightening arrestors, cutouts, crossarms, insulators, switches, and switchgear · Installing and maintaining transmission lines including new construction and maintenance · Ability to perform light distribution, (cover up, moving wire, storm response) · Running new wire and maintaining old wire · Installing new lines and performing repairs including energized stick work, pole assembly, conductor installation and operating equipment · Setting towers and poles · Reading and interpreting drawings and blueprints · Digging trenches, climbing poles, towers etc. to perform duties · Troubleshooting and repairing systems as required · Collaborating with team members to accomplish projects on time and within budget · High level working knowledge of linework safety, grounding, and heavy equipment operation · Be able to plan and coordinate work efficiently and safely · Must be able to effectively conduct a pre-job or tailgate briefing · Does all other related work as required to complete the job Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle and feel; and reach with hands and arms. Work Environment: While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction job sites. The noise level in the work environment and job sites can be loud. This position is performed in outside weather conditions. Competencies: Self-Motivated Team-Oriented Customer Oriented Must be able to follow Company safety rules and all other Company policies. Required Qualifications: Minimum 3 or more years of recent field experience Valid Class A Commercial Driver License and Acceptable driving record Able to read and communicate effectively in English Able to travel long distances at short notice, when required Able to work for extended periods in various locations, when required Able to lift more than 50 lbs. Able to properly inspect rubber goods and PPE Willing to work overtime when requested Willingness to glove/work live high voltage distribution power lines Special Position Requirements This is a safety sensitive position and all applicable policies including drug testing and background checks will apply. River City Construction provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, national origin, age, disability or genetics. In addition to federal law requirements, River City complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. Benefits We offer a comprehensive benefits package designed to support the well-being of our employees and their families. Our benefits include medical, dental, and vision coverage, paid time off, company-paid holidays, a 401(k) plan, and numerous voluntary benefits.

The Hydro Plant Electrician is responsible for the lead in performing checkout, troubleshooting, installation, modification, and repair of electrical equipment/controls associated with the following power generating plants: pumped storage and conventional hydroelectric plants and simple cycle gas turbine plants. Performing preventive and predictive maintenance on plant electrical equipment that includes Baker surge testing, partial discharge data collection, thermographic and airborne ultrasonic inspections, high voltage and current testing, TTR testing, and Ductor testing. Responsible for generating electric power in compliance with corporate safety policies, mandatory electric reliability standards, and regulations from FERC, EPA, EPD, OSHA, DOT, and other pertinent governmental authorities. Job Duties: Takes the lead in performing check-outs, maintenance, and troubleshooting of electrical equipment such as, but is not limited to, protective relays, over-current devices, meters and transducers, electrical switchgear and circuit breakers, electric motors and motor controls, generators and excitation equipment, batteries, and power inversion and conversion equipment. Maintain work area and equipment in a clean and orderly manner. Observe corporate and plant(s) safety rules and practices. Engage in operations for alteration, installation, or replacement of station electrical components by working with blueprints, electrical schematics, logic diagrams, plans, or sketches. Make necessary changes, remove old components, install new components, and field check the system, as assigned. Perform a variety of duties such as equipment inspection to determine extent of defects, diagnosis of faulty operations and apply corrective methods. Engage in operational tests, lubricate equipment, verify working clearances, and check completed work. Perform preventive and predictive maintenance testing and servicing of components and equipment. While performing these duties, the incumbent may be required to carry up to 75 pounds of tools, equipment, and/or materials. The position may necessitate working within confined spaces and other areas that are typically difficult to access while performing these duties. To access the work locations, the incumbent must be capable of climbing up and down several hundred steps, climb scaffolding, work at heights, within confined spaces, near or over water, near high voltage equipment, and must be able to wear, and use required personnel protective equipment, including self-contained breathing apparatus, full face cartridge respirators, and air lined supply respirators. Operate all electrical shop equipment, basic machine shop tools (saws, drill presses, grinders, and hydraulic presses) and have basic welding skills using SMAW, GMAW, and FCAW welding processes to perform, non-structural welds involving reconditioning of parts or fabricating new parts from drawings or plans. Sets up machines for desired operation and performs work within specified tolerances and standards. This work involves exposure to high voltage, welding arcs, and heat/flame. The incumbent must be able to wear and use the required protective equipment. Balance and align plant equipment in the plants owned and/or operated by Plant Operations. During the execution of these tasks, the individual will encounter rotating machinery and may be exposed to high voltage. The incumbent must be able to wear and use the required protective equipment. Maintain job related qualifications and system knowledge of the electrical equipment at the plants serviced. This to be done by attending and participating in scheduled training and safety meetings and acquiring and maintaining skill levels and certifications to complete job tasks. Perform preliminary design of modifications to mechanical systems, which are reviewed for accuracy and for additional support requirements by the Maintenance Manager and/or Senior Electrical Generation Engineer. Required Qualifications: Education: High School Graduate-General Studies Experience: Five (5) years of progressively responsible electrician experience in a hydroelectric and/or gas turbine electric power generating plant is required. Equivalent Experience: Eight (8) years of progressively responsible electrician experience in an industrial plant is equivalent. Two (2) years of college or technical training in a related technology program are equivalent to two (2) years of experience. Completion of the Rocky Mountain Hydroelectric Plant Maintenance Training Program for a Maintenance Electrician as outlined in Maintenance Training Procedure RMP MD-A002 is equivalent to five (5) years of experience.

Job Description Location: Travel required (multi-state commercial projects) Job Type: Full-Time, Hourly Industry: Commercial Flooring We are seeking a motivated Traveling Flooring Apprentice to support large-scale commercial tile and flooring installations. This role is ideal for someone looking to build a long-term career in the commercial flooring industry, with clear opportunities for advancement into a supervisor position. The apprentice will work alongside experienced crews, assist with jobsite operations, material handling, and installation support, while learning industry best practices and safety standards. Key Responsibilities Assist with large commercial tile and flooring installations Pick up, deliver, and stage materials for job sites Safely operates equipment such as forklifts and LULL (telehandler) (training provided if needed) Manage and maintain jobsite inventory, tools, and materials Support repairs, punch list work, and final touch-ups Move, stage, and organize materials to maintain efficient job site workflow Assist with job site cleanliness and safety compliance Travel to job sites as required and work flexible schedules based on project needs Preferred Qualifications Ability to read and understand blueprints and floor plans Previous experience in construction, flooring, tile, or commercial trades (preferred but not required) Forklift or LULL experience (or willingness to be trained) Strong work ethic and willingness to learn Reliable transportation and ability to travel Ability to lift heavy materials and perform physical labor Strong attention to detail and teamwork skills Compensation & Benefits Hourly pay (based on experience) Overtime opportunities available Benefits package may include: Health insurance Paid time off Travel accommodation per diem (if applicable) Ongoing training and career development Clear growth path to Supervisor Career Growth Opportunity This position is designed as a career-building role. Employees who demonstrate reliability, leadership, and technical skills will have opportunities to advance into supervisor or leadership positions within the company.

B&B Automated Controls is a Commercial/Industrial Energy Management Low Voltage Controls Installer. We are looking for people who are interested in the Electrical Low Voltage field. Our work consist of K-12 Schools, Colleges, Government facilities and Industrial buildings (new construction and retrofits). Our shifts vary when working in locations that are occupied during the day by students. We are willing to train the right electricians to switch over to Low Voltage Control work. We offer competitive pay based on experience along with paid Holidays, paid sick days and IRA with 3% match. No health Insurance at this time. Electrician Apprentice: 2-3 years experience NOTE: Most projects are located North, Northeast or Northwest of Atlanta, Ga. All Applicants Must be able to pass a drug screen and background check. Electricians must be able to bend and install EMT conduit. Experience reading mechanical and electrical drawings and wiring diagrams is a plus. Previous Controls System knowledge is a plus. Apply On Ladder: *************************************************************************************************

--MUST be willing to train M-F 7a-4p and then move to either our B shift or D shift (6:45p-7a swing shift) --MUST have the following: 2+ years experience as an industrial electrician working in a manufacturing setting 2+ years experience with drives, PLC's and VFD Bend conduit experience Ability to interpret electric schematics Familiarity with 480 volts 3 phase ESSENTIAL RESPONSIBILITIES & DUTIES Plans details of working procedure by determining replacement needs or new material required and develops a logical approach to correct the problem. Analyzes circuits, wiring diagrams and drawings to install, repair, calibrate, service or replace electronic devices and systems. Receives wiring diagrams, specifications and instructions from supervisor covering emergency and scheduled repairs, installation, and electrical inspection work to be performed. Performs work requiring a thorough knowledge of electrical theory and principles, statutory codes, properties of materials and principles of operation of electrical equipment. Starts up and shuts down equipment in accordance with company safety procedures for machine activation and shutdown and in line with OSHA requirements. Services electronic equipment by checking, testing, and replacing faulty components, circuits, printed circuit boards, and similar electronic devices. Installs, repairs, and maintains communication cables, power distribution cables, then splicing pieces as required. Fabricates parts if not commercially available, using machine and hand tools common to the trade. Determines need for, analyzes, and makes necessary running adjustments, repairs, and overhauls. Advises and cautions operators and mechanics about potential electrical problems and inherent dangers involved. Notifies supervisor of potentially dangerous electrical equipment noted and corrective action taken. ESSENTIAL SKILLS & ABILITY Problem solving-identifies and resolves problems in a timely manner, gathers and analyzes information skillfully. Planning/organizing-prioritizes and plans work and uses time efficiently. Attention to detail, organized, able to meet deadlines. Quantity-meets productivity standards and completes work in a timely manner. Adaptability-adapts to changes in the work environment, manages competing demands and is able to deal with frequent change, delays or unexpected events. Can function as a self-starter with the ability to work independently. Dependability-consistently at work and on time, follows instructions and responds to management direction. Safety and security-observes safety and security procedures and uses equipment and materials properly. Ability to read and interpret safety rules and instructions which are posted in English. Communication - effectively and professionally conveys information internally and externally through verbal and written communication skills. Actively listens, communicates clearly, concisely and assures understanding. Ability to calculate figures and amounts, add, subtract, multiply and divide numbers. Function as a self-starter with the ability to work independently. Detail-oriented and organized, able to work in a fast-pace environment and meet deadlines. A demonstrated ability to prioritize, follow through, and manage multiple projects. Ability to read and interpret safety rules and instructions which are posted in English