Journeyman lineman jobs in Henderson, TX

Job Posting End Date 12-24-2025 Please note the job posting will close on the day before the posting end date Perform all types of work involved with the installation, rearrangement, maintenance, operation, removal and inspection of electrical transmission and distribution facilities. All items apply to overhead and underground as applicable. Direct crew on a routine basis and exercise leadership and good judgment when in charge. Job Description Successful candidate must be within 30 minutes of the Texarkana Service Center Line Mechanic C: What You'll do: * Assemble, install, maintain, remove and competently inspect overhead, and underground facilities including conductors, cables, transformers, fixtures, structures and other associated equipment under immediate or general supervision as skill level dictates. * After completion of C-100, or equivalent experience, shall be competent to perform work on conductors and equipment energized up to 260 volts under general supervision. Assist with work on conductors and equipment energized at secondary voltages to 600 volts under immediate supervision of higher classification. * After completion of C100, or equivalent experience, test, de-energize and ground URD cable, Splice and terminate URD cable, and troubleshoot, repair and energize URD cable and equipment under immediate or general supervision as skill level dictates. * After completion of C-200, or equivalent experience, shall be capable of working on conductors and equipment energized up to 600 volts under general supervision. Use volt meters, amp meters, ground meggers, continuity testers and other electrical test equipment associated with line work on voltages up to 600 volts. * After completion of C-200, or equivalent experience, may cover up stationary tied in (cannot transfer) primary conductors and equipment under direct supervision as skill level dictates. * After completion of C-300, or equivalent experience, may cover up, transfer or move primary conductors and equipment under direct supervision as skill level dictates. * After completion of C-400, or equivalent experience, perform the same duties as outlined in the B classification during the first TWELVE MONTHS. (Wording from LMB description - During the first twelve months in this classification (LMB) assist with work on energized lines, cables and equipment. * During this time frame, the employee should progress from direct supervision to immediate supervision as skill level dictates. * Also, shall be capable of replacing fuses and operate switching and sectionalizing devices energized at any voltage when working under general supervision.). * Build and erect equipment mountings (such as regulator and transformer platforms) and build overhead transformer installations. * Conduct proper tagging procedures while performing switching of energized circuits * Perform inspection and trouble-shooting of lines. * Perform similar or less skilled work as assigned. * Direct the work of employees assigned to assist. * Complete Monthly Apprentice Cards and submit to local supervision for review .The following reference is provided as a guideline for persons responsible for directing the duties and responsibilities of assigned personnel, to assist in the safety and development of employees, and is not intended to limit assignment of work or the degree of supervision under all operating conditions: * DIRECT SUPERVISION - When a qualified person is working with/hands-on with the person performing the designated task. * IMMEDIATE SUPERVISION - When a qualified person is near the structure/equipment and is in constant visual and/or verbal contact to the person performing the designated task. * GENERAL SUPERVISION - An employee of higher classification, knowledgeable of the task at hand and not necessarily at the job site. * QUALIFIED PERSON - Line Mechanic or Supervisor who is knowledgeable of the task or work to be performed, and is capable of performing the appropriate emergency rescue. What We're Looking For: Education: * High school diploma or GED Experience: * Minimum of one year distribution electrical power line work experience, OR one year of related line experience defined as: successful completion of a one year electrical power line school certificate plus a minimum of 16 weeks internship or distribution electrical power line experience, or an Associate degree from an electrical power line school which includes a minimum of 16 weeks internship or distribution electrical power line experience. Licenses/Certifications: * Valid Class A CDL is required Other Must Haves: * Shall have performed the duties of and have all the qualifications of Line Mechanic D or the equivalent and shall qualify through demonstration, examination and/or performance appraisal as determined by the Company. * Must have the ability and desire to acquire the necessary knowledge and skills to perform the duties and/or responsibilities of the key job (Line Mechanic A) in this family and be qualified through demonstration, examination and/or performance appraisal as determined by the Company. * Must acquire within such time frame as determined by the Company, the qualifications necessary to perform the duties of the next higher classification in the line of progression, or vacate the current job classification. * A physical abilities assessment is also required for this position. Line Mechanic B: What You'll do: * Assemble, install, maintain, remove and inspect conductors, fixtures and other associated equipment on overhead and underground facilities. * During the first twelve months in this classification assist with work on energized lines, cables and equipment. During this time frame, the employee should progress from direct supervision to immediate supervision as skill level dictates. Also, shall be capable of replacing fuses and operate switching and sectionalizing devices energized at any voltage when working under general supervision. * After twelve months in this classification, while performing work on energized lines and equipment, should progress from immediate supervision to general supervision as skill level dictates. * Install and operate cutouts, line switches, reclosers and other sectionalizing devices; re-fuse line and transformer devices; test de-energized line or equipment, and place or remove grounds. * Install, maintain and switch residential and commercial underground distribution facilities. Locate and correct trouble using cable-locating and fault finding tools and equipment. * Install and maintain multiple street light circuits. * Install three-phase transformer banks on poles, aerial or ground-mounted platforms. * Install three-phase regulator banks and energize or remove them from service. Install, maintain, operate and remove capacitor banks from service. * Connect, check phase rotation, parallel and check voltage on single and three-phase transformer installations. * Locate and correct faults and hazardous conditions on lines and/or equipment. * Perform similar or less skilled work. * Prepare, conduct and facilitate safety meetings. * Direct the work of employees assigned to assist. * Complete Monthly Apprentice Cards and submit to local supervision for review .The following reference is provided as a guideline for persons responsible for directing the duties and responsibilities of assigned personnel, to assist in the safety and development of employees, and is not intended to limit assignment of work or the degree of supervision under all operating conditions: * DIRECT SUPERVISION - When a qualified person is working with/hands-on with the person performing the designated task. * IMMEDIATE SUPERVISION - When a qualified person is near the structure/equipment and is in constant visual and/or verbal contact to the person performing the designated task. * GENERAL SUPERVISION - An employee of higher classification, knowledgeable of the task at hand and not necessarily at the job site. * QUALIFIED PERSON - Line Mechanic or Supervisor who is knowledgeable of the task or work to be performed and is capable of performing the appropriate emergency rescue. What We're Looking For: Education: * High school diploma or GED Experience: * Minimum of 2 years of work experience as Line Mechanic C or the equivalent experience as determined by the Company Licenses/Certifications: * Valid Class A CDL is required Other Must Haves: These are additional expectations for the job and could include specific work experience, license / certifications, preemployment testing, expectations about travel, shift work, etc. * Shall have performed the duties of and have all the qualifications of Line Mechanic C or the equivalent and shall qualify through demonstration, examination and/or performance appraisal as determined by the Company. * Must have the ability and desire to acquire the necessary knowledge and skills to perform the duties and/or responsibilities of the key job (Line Mechanic A) in this family and be qualified through demonstration, examination and/or performance appraisal as determined by the Company. * Must acquire within such time frame as determined by the Company, the qualifications necessary to perform the duties of the next higher classification in the line of progression, or vacate the current job classification. * A physical abilities assessment is also required for this position. Line Mechanic A: What You'll do: * Install and maintain transmission and distribution facilities and all types of line equipment on the most congested types of construction, energized or de-energized. * Assemble, install, maintain, remove and inspect conductors, fixtures and other associated equipment on overhead and underground facilities. * Operate cutouts, line switches, reclosers and other sectionalizing devices; re-fuse line and transformer devices; change line and transformer taps; phase out and/or parallel circuits. * Select proper standard drawings and interpret specifications and proceed with all new construction work and live line work without supervision. * Make energized cut overs from old poles and equipment to new or temporary installations. * Work with live line equipment on energized circuits for emergency repairs or routine modifications of facilities. * Make energized cut overs from old poles and equipment to new or temporary installations. * Install, maintain and switch underground residential distribution and commercial facilities. * Locate and correct trouble using cable locating and fault finding tools and equipment. * Direct crew when assigned. Obtain, issue, accept and release transmission and distribution clearances or permits in accordance with established switching and tagging procedures. * Instruct customers regarding meter or service locations, and advise customers regarding service interruptions related to customers' electrical equipment. * Direct the work of employees assigned to assist. Assist employees of equal or higher classification. Perform similar or less skilled work. What We're Looking For: Education: * High school diploma or GED Experience: * Successful completion of apprentice lineman training, including B-200 certification written test with a score of 80% or higher and successful completion of hands-on comprehensive demonstrations. * External candidates must have a minimum of 4 years line work experience and successful completion of the journeyman pre-assessment. Licenses/Certifications: * Valid Class A CDL is required Other Must Haves: * Shall have performed the duties of and have all the qualifications of Line Mechanic B or the equivalent and shall qualify through demonstration, examination and/or performance appraisal as determined by the Company. * A physical abilities assessment is also required for this position. In addition to a competitive compensation, AEP offers a unique comprehensive benefits package that aims to support and enhance the overall well-being of our employees. Where Putting the Customer First Powers Everything We Do At AEP, we're more than just an energy company - we're a team of dedicated professionals committed to delivering safe, reliable, and innovative energy solutions. Guided by our mission to put the customer first, we strive to exceed expectations by listening, responding, and continuously improving the way we serve our communities. If you're passionate about making a meaningful impact and being part of a forward-thinking organization, this is the company for you! What You Will Get: $34.69 - $53.36 OTHER REQUIREMENTS: Shall have performed the duties of and have all the qualifications of Lineman A or the equivalent and shall qualify through demonstration, examination and/or performance appraisal as determined by the Company. Must have a good working knowledge of Company safety rules and practices and be proficient in the application of resuscitation and first aid. Must have a good working knowledge of various circuit connections, voltage identification of lines, phasing, transformer connections and switching devices. Must know the fundamentals of electricity and have the ability to interpret field prints and switching diagrams. Must possess and maintain a valid state driver's license. Must meet all vehicle operation requirements as designated by federal and/or state law. Must have a good working knowledge of the tools, materials and equipment used. Must have a good working knowledge of the Company's transmission and distribution standards. Must possess the ability to deal with employees, customers and the general public in a courteous and proper manner. Must possess the ability to plan work and to properly instruct others. A physical abilities pre-assessment is also required for this position. This role requires regular overtime and on-call response. Travel, including out of town travel, may also be required. Compensation Data Compensation Grade: U073-R05 Compensation Range: $34.69 - $57.65 The Physical Demand Level for this job is: H - Heavy Work: Exerting 50 to 100 pounds of force occasionally, and/or 25 to 50 pounds of force frequently, and/or greater than negligible up to 10-20 pounds of force constantly to move objects. Physical demand requirements are in excess of those for Medium Work. It is hereby reaffirmed that it is the policy of American Electric Power (AEP) to provide Equal Employment Opportunity in all respects of the employer-employee relationship including recruiting, hiring, upgrading and promotion, conditions and privileges of employment, company sponsored training programs, educational assistance, social and recreational programs, compensation, benefits, transfers, discipline, layoffs and termination of employment to all employees and applicants without discrimination because of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, veteran or military status, disability, genetic information, or any other basis prohibited by applicable law. When required by law, we might record certain information or applicants for employment may be invited to voluntarily disclose protected characteristics.

**MasTec Utility Services** delivers critical infrastructure construction and engineering services for power delivery, gas, and water customers, specializing in overhead and underground electric distribution for power delivery systems, gas distribution construction for gas systems, and turnkey solutions for a variety of water, sewer, and civil infrastructure projects. Backed by the strength of decades of experience, unrivaled industry skills, and a deep commitment to core values, MUS delivers safe, innovative, and environmentally responsible services that provide extraordinary value to clients. MasTec Utility Services is a purpose-driven company. Our core values guide our strategy, performance, and culture. We believe in maintaining an environment where team members can make an impact, grow, and thrive. A place where they find meaning and purpose in doing the important work of ensuring communities have the vital energy, light, and communications to prosper. Our culture is inclusive and welcoming. Our teams are empowered with abundant training, tools, and opportunities to follow their curiosity and ambitions. Everyone has an equal chance to advance. Everyone is supported, respected, and challenged to be their best. We're always looking for talented and dedicated people to join us and love where they work. MasTec Utility Services is a proud subsidiary of MasTec (NYSE: MTZ), a Fortune 500 Company ranked by Energy News-Record as one of the leading contractors in the country. MUS is part of the MasTec Power Delivery segment. We are certified as a minority-controlled company by the National Minority Suppliers Development Council (NMSDC). Our rich diversity of people and ideas makes us a stronger, more innovative organization. **Job Summary** The OHE Lineman B assists the Journeyman Lineman and the Foreman while in training and learning the trade. Responsible for performing work related to the construction and maintain of poles, power lines, auxiliary facilities and equipment for the transmission and distribution of electricity. Sets a good example for newer apprentices by always following and teaching safe practices. This position supports and learns from the Lineman team and works with other personnel from the department. Responsibilities + Construct, maintain, and inspect transmission and distribution of electrical or power lines. + Provide technical skills needed for the operation and maintenance of reliable electrical services for the consumer, completing jobs with quality and timeliness. + Provide for connecting and disconnecting, installing and removal, moving and transferring of various electrical devices on customer facilities, e.g., transformers, transformer banks, regulators, switches, switching devices, capacitor banks, etc. + Route or re-route power lines over, under, or around existing lines and structures. + Inspect and/or remove power lines that are damaged. + Assist in carrying poles, digging holes, and other operations involved in setting or replacing poles. + Perform line switching or sectionalizing, as directed. + Provide backup for Class A Apprentice Lineman and assist in completion of duties. + Responsible for timely submission of all Apprentice Program required documentation. + May troubleshoot electrical problems on customer equipment. + Drive bucket truck to jobsite and maintain truck stock. + Investigate consumer complaints and make repairs to energized electrical distribution lines, as needed. + Perform other duties as required and/or assigned. Qualifications **Minimum** + High school diploma, or equivalent. + 2 years of lineman experience. + Valid Class A CDL is required. **Preferred** + 3 or more years of lineman experience. + OSHA 10 Certification. **Physical Demands and Work Environment** This job operates in a field environment. This role routinely requires extended periods of bending, squatting, climbing, kneeling, pushing, pulling, lifting, lifting in awkward positions, standing, and twisting. Also, working in inclement weather conditions, such as extreme heat, extreme cold, rain, ice, snow, and wind. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. This position is physically active, with lifting required. Must be able to bend and lift and carry up to 50 pounds. Clarity of vision at 20 feet or more or 20 inches or less, with the ability to judge distance and space relationships. Precise hand-eye coordination. Ability to identify and distinguish colors. _Please note this is not designed to cover or contain a comprehensive list of activities, duties, or responsibilities that are required of the employee for this job. The Company reserves the right to revise or change the job duties as the need arises. Management reserves the right to change the description, duties, or work schedules to accommodate individuals with disabilities._ Benefits available include Medical, Dental, Vision, Disability and Life insurance, a 401k plan and Employee Stock Purchase plan. MasTec is a publicly traded company MTZ (NYSE). Equal Employment Opportunity: The Company's policy is not to unlawfully discriminate against any applicant or employee based on race, color, national origin, ethnicity, sex, gender, sexual orientation, religion, marital status, age, disability, genetic information, veteran status, or any other basis protected by applicable law and EEOC regulations. The Company also prohibits harassment of applicants or employees based on any of these protected categories. **Minimum** + High school diploma, or equivalent. + 2 years of lineman experience. + Valid Class A CDL is required. **Preferred** + 3 or more years of lineman experience. + OSHA 10 Certification. **Physical Demands and Work Environment** This job operates in a field environment. This role routinely requires extended periods of bending, squatting, climbing, kneeling, pushing, pulling, lifting, lifting in awkward positions, standing, and twisting. Also, working in inclement weather conditions, such as extreme heat, extreme cold, rain, ice, snow, and wind. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. This position is physically active, with lifting required. Must be able to bend and lift and carry up to 50 pounds. Clarity of vision at 20 feet or more or 20 inches or less, with the ability to judge distance and space relationships. Precise hand-eye coordination. Ability to identify and distinguish colors. _Please note this job description is not designed to cover or contain a comprehensive list of activities, duties, or responsibilities that are required of the employee for this job. The Company reserves the right to revise or change the job duties as the need arises. Management reserves the right to change the description, duties, or work schedules to accommodate individuals with disabilities._ Benefits available include Medical, Dental, Vision, Disability and Life insurance, a 401k plan and Employee Stock Purchase plan. MasTec is a publicly traded company MTZ (NYSE). Equal Employment Opportunity: The Company's policy is not to unlawfully discriminate against any applicant or employee based on race, color, national origin, ethnicity, sex, gender, sexual orientation, religion, marital status, age, disability, genetic information, veteran status, or any other basis protected by applicable law and EEOC regulations. The Company also prohibits harassment of applicants or employees based on any of these protected categories. + Construct, maintain, and inspect transmission and distribution of electrical or power lines. + Provide technical skills needed for the operation and maintenance of reliable electrical services for the consumer, completing jobs with quality and timeliness. + Provide for connecting and disconnecting, installing and removal, moving and transferring of various electrical devices on customer facilities, e.g., transformers, transformer banks, regulators, switches, switching devices, capacitor banks, etc. + Route or re-route power lines over, under, or around existing lines and structures. + Inspect and/or remove power lines that are damaged. + Assist in carrying poles, digging holes, and other operations involved in setting or replacing poles. + Perform line switching or sectionalizing, as directed. + Provide backup for Class A Apprentice Lineman and assist in completion of duties. + Responsible for timely submission of all Apprentice Program required documentation. + May troubleshoot electrical problems on customer equipment. + Drive bucket truck to jobsite and maintain truck stock. + Investigate consumer complaints and make repairs to energized electrical distribution lines, as needed. + Perform other duties as required and/or assigned.

Job Title: Apprentice Lineman Reports to: Distribution Crew Foreman FLSA Status: Non-Exempt Work Schedule: Full Time The Apprentice Lineman is an entry-level role that plays a crucial part in the construction, maintenance, and repair of electrical overhead distribution systems. This position requires working at various job sites, often outdoors in different weather conditions, and may involve travel based on customer needs. The role demands a commitment to safety, teamwork, and the ability to perform physically demanding tasks. To accomplish this job successfully, an individual must be able to perform, with or without reasonable accommodation, each essential function satisfactorily. Essential Functions: Safety Compliance: Always work safely, whether performing new construction, maintenance, or repair work on energized and de-energized overhead systems, following safety protocols and guidelines. Overhead Line Work: Assist in stringing overhead wires, setting poles, and anchors, and installing transformers, lightning arrestors, cutouts, crossarms, insulators, switches, and switchgear. Electrical Equipment Handling: Aid in replacing fuses in transformers, clearing faulted circuits, and installing/removing services on overhead distribution lines. Equipment Maintenance: Maintain company vehicles, tools, and equipment in good working condition and report any issues promptly. High Voltage Handling: Work with energized high-voltage systems with appropriate skills and caution, ensuring personal and team safety. Basic Rigging & Hand Tools: Understand and utilize basic rigging techniques, hand lines, and knot tying, ensuring the proper use and maintenance of tools. Transformers & Voltage Knowledge: Assist with the installation and hook-up of single-phase transformers and have the ability to identify primary and secondary voltages on circuits. Bucket Rescue & Safety: Capable of performing basic bucket rescue/escape and demonstrate knowledge of minimum approach distances and the use of personnel protective equipment (PPE). Grounding & Rigging: Understand equipment setup and grounding procedures, as well as the proper use of Kellum grips and other linework materials. Physical Labor & Climbing: Perform physically demanding tasks, including climbing different types of structures (wood, steel, etc.) and working at heights or in confined spaces. Environmental Adaptability: Work efficiently in various weather conditions, including extreme heat, cold, rain, or snow, ensuring safety and effectiveness. Communication & Teamwork: Communicate effectively using company radios, follow directions, and collaborate with team members to complete assigned tasks. Compliance & Inspection: Properly inspect rubber goods, PPE, and other safety equipment, ensuring compliance with company and industry standards. Other Functions: Willingness to work live high-voltage distribution lines using appropriate protective gear. Assist with other tasks and projects as assigned by the Distribution Crew Foreman. Position Qualifications: High School Diploma or GED. Valid Class A CDL preferred but not required. Must be able to obtain Class A CDL License within 6 months of hire. Must pass a background check, MVR check, pre-employment drug screen, and physical examination. Experience & Skills: No Experience required. Ability to work effectively in a team environment and maintain a positive attitude, even in high-pressure situations. Strong communication skills and the ability to follow instructions. Willingness to learn and adapt to different tasks, equipment, and safety procedures. Basic knowledge of electrical systems and linework materials is an advantage. Physical Requirements: N (Not Applicable) Activity is not applicable to this position. O (Occasionally) Position requires this activity up to 33% of the time F (Frequently) Position requires this activity from 33% - 66% of the time C (Constantly) Position requires this activity more than 66% of the time Activity Frequency Stand Constant (C) Walk Constant (C) Sit Occasionally (O) Kneel/Squat Frequently (F) Grasp Frequently (F) Climb Stairs Occasionally (O) Work Environment: This job operates in an outdoor field setting. Exposer to extreme weather may be applicable. The company has reviewed this to ensure that essential functions have been included. It is intended to provide guidelines for job expectations and the employee's ability to perform the position described. It is not intended to be construed as an exhaustive list of all functions, responsibilities, skills and abilities. Additional functions and requirements may be assigned by management. This document does not represent a contract of employment, and the company reserves the right to change this job description and/or assign tasks for the employee to perform, as the company may deem appropriate.

Excited to grow your career? We value our talented employees, and whenever possible strive to help one of our associates grow professionally before recruiting new talent to our open positions. If you think the open position you see is right for you, we encourage you to apply! Our people make all the difference in our success. Compensation Grade ONS-USD-N32 Who We Are INEOS Energy INEOS Energy is the energy division of INEOS, we produce and trade oil, gas, power, liquefied natural gas (LNG) and carbon credits. Operating across the Danish and UK North Sea with offshore oil & gas assets and onshore assets in South Texas, US. This is supported by our investments and projects in low carbon technologies, which will help sustain our business through the energy transition. The key focus for the US Onshore business is to acquire, explore and develop properties to produce natural gas, oil and NGL from underground reservoirs safely and efficiently. Key operated assets are in the Eagle Ford shale basin in South Texas. With over 2,000 well producing net 36kBOE per day. Owning and operating producing US onshore assets is part of INEOS Energy's strategy to build a global integrated portfolio, fit for the energy transition, offering high-quality energy solutions to its customers. About the job Job Title: EDS Lineman Summary of Position We are seeking a dedicated individual to assist in the maintaining and repairing of a 25 kV overhead and underground power line system used to supply power to Oil and Gas Operations. Primary Job Responsibilities * Install, maintain, and repair overhead and underground electrical distribution lines. * Knowledge of equipment use such as bucket trucks, digger derricks, and other related machinery. * Assist in the supervision of construction/maintenance crews for 25 kV overhead and underground power line systems. * Coordinate outage repairs and processing for safe and reliable re-energizing. * Regular inspections and maintenance of power lines and equipment to ensure optimal performance and safety. * Patrols lines and identifies, repairs, and or replaces defective equipment, and corrects any unsafe conditions. * Working closely with other utility workers, engineers, and contractors to ensure projects are completed efficiently and safely. * Work with Electrical Engineers to develop designs and material lists for new and expanding electrical distribution system projects * Respond to emergency outages and perform necessary repairs promptly and safely. * Ensure all work complies with national, state, and local electrical codes and regulations. * Maintain accurate records of work performed, materials used, and time tracking. * Fill in for Lead Lineman during their days off and PTO. * Perform physical tasks such as climbing power poles as required. * Required to be on call and available for after hours, holidays, and weekend work hours when needed. Education & Experience * High school diploma or equivalent. * Completion of a recognized apprenticeship program or equivalent experience. * Valid Journeyman Lineman certification or equivalent experience. * 3-5 years of experience preferred * Proficiency in using electrical tools and diagnostic equipment. * Ability to read and interpret electrical schematics and blueprints. * Valid driver's license; CDL preferred but not required * Strong understanding of safety procedures and regulations. * Physical ability to perform the duties of the position, including working at heights and in various weather conditions. * Trained in pole climbing, pole top rescue, ability to work repairs from climbing. Additional Requirements: * EDS spans from Big Wells to Tilden. Must live within 80 mile radius.

Linetec is a part of the Centuri Group, who is comprised of a family of companies that make up a utility infrastructure enterprise, operating throughout the US and Canada, safely delivering gas, electric and utility services to our customers and the community. We help you build your career on Solid Ground by investing in your development and valuing your unique skills, perspective, and background. Employees are the lifeblood of our organization, and we're committed to providing a stable foundation to continuously grow and thrive. We've got work for the next 100 years - All we need is you! As a Lineman A1 you will build and maintain multiphase energized facilities with minimum supervision under working Journeyman or above. Experience required is fourth year first, six months. The work location for this position is in Alpine, TX. Perks * Benefit Package including Medical, Dental and Vision Coverage * 401K w/ Company Match * Voluntary Life & AD&D Insurance and Short-Term and Long-Term Disability * Vacation/Sick Time and Paid Holidays * Potential Bonus Opportunities * Career Development Opportunities * Employee Discounts * Weekly Payroll Responsibilities * Work on utility poles and fixtures on energized situations * Demonstrate proper cover application, handling energized multiphase primary conductors and working around covered multiphase lines * Frame transformer banks, rotate three phase secondary/services and troubleshoot overhead lines * Read job prints and built to spec * Adhere to safety performance requirements * Complete tree trimming, multimeter operations, using line test equipment, cut-outs and reclosures, advanced rigging, line repair with rubber gloves and hot sticks * Introduction to substation safety, capacitors and reactors, power transformers, URD troubleshooting and circuit breakers * Perform other responsibilities as requested by leadership Education, Skills, Experience Needed * Minimum 4 years' experience in the electrical powerline industry * All the knowledge, skills and abilities required for a Lineman B2 * Understand basic electricity and proper use, care and maintenance of hot sticks * Pass evaluation of competency prior to promotion and activity in the Apprenticeship Training Program Working Environment * Work sites are outdoors in potentially extreme weather conditions * All worksite safety instructions are written and spoken in English; must be fluent in English * Work includes prolonged and repeated: lifting (including overhead, up to 50lbs); standing; climbing; kneeling; reaching and feeling; crouching and crawling * Work is performed within the "red zone" of heavy equipment * Working safely requires quick/accurate hand-eye coordination and the ability to work in a constant state of alertness and safe manner Requirements * Pass pre-employment, random, post-accident, and reasonable suspicion drug screens * Provide valid US work authorization documents for E-Verify * Satisfactory results of pre-employment background check results * Valid driver's license with clean driving record is preferred * Pre-employment medical fit-for-duty test; hold/obtain DOT medical card * With the health and safety of our employees, customers and the communities we serve in mind, all candidates who receive an offer of employment will be required to complete a COVID-19 risk assessment; your responses will help us determine an employment start date Equal Employment Opportunity Statement This job description is subject to change at any time. It reflects management's assignment of essential functions, and does not exclude or restrict the tasks that may be assigned. Centuri and its subsidiary companies will provide equal employment opportunities to all applicants without regard to an applicant's race, color, religion, sex, gender, genetic information, national origin, age, veteran status, disability, or any other status protected by federal, state or local law. Centuri will provide reasonable accommodations to allow an applicant to participate in the hiring process (e.g., accommodations for a test or job interview) if so requested. Centuri is a Department of Transportation regulated employer. Certain safety-sensitive positions are covered under the DOT Drug and Alcohol Testing Regulations, 49 CFR Part 40. It is important to note that marijuana remains a drug listed in Schedule I of the Controlled Substances Act. It remains unacceptable for any safety-sensitive employee subject to drug testing under the company's Drug Free Workplace Policy to use or test positive for marijuana. Nearest Major Market: Midland

VersaTech is an Automation company with over 700 people and $100M+ in annual sales. VersaTech offers Instrumentation and Electrical services to the oil and gas market including construction, maintenance, commissioning and loop checking. VersaTech has offices in Houston, Dilley, Midland, New Orleans, Africa, and Dubai. Our scope of work includes both onshore and offshore projects in the US and overseas. VersaTech has an opening for Class A Lineman. The primary function of this position is to safely perform skilled electrical line work in the construction, operation, maintenance, and repair of the overhead electrical distribution system. Primary Responsibilities: Works safely on construction, maintenance or repair work on energized and de-energized overhead work. Set poles, anchors, install transformers, lightning arrestors, cutouts, cross-arms, insulators, switches, and switchgear. Operate digger truck and bucket truck of various sizes and models Troubleshoot primary and secondary systems Medium to high voltage experience (480,4160 and above) Cable of installing and removing proper cover-up Grounding Operate overhead buckets on electric distribution systems to set transformers plus pulling primary and secondary conductors Will assist and perform other duties as assigned when not performing lineman work Assist electrical crews Operate equipment as needed

5 Star Electric, LLC (5 Star) is a premier full-service provider of electrical construction, maintenance, and repair services with offices in Western Kentucky and Dallas/Fort Worth, Texas. 5 Star specializes in Distribution and Transmission Power Line work, Substation, Industrial, Commercial, Streetlighting, and Fiber installations. Position Title: Transmission Lineman - B Class Our Core Values: Guided by Safety. Focused on Communities. Powered by Care. Essential Functions: Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. The Transmission Lineman - B Class T is responsible for all Groundman and Class C Lineman responsibilities in addition to working energized and de-energized lines and equipment. Roles and Responsibilities: Thorough knowledge of methods, practices and equipment of electrical line work. Thorough knowledge of the hazards of electrical work and necessary safety precautions. Ability to climb poles and perform strenuous duties in a variety of weather conditions. Ability to follow oral and written instructions and communicate effectively verbally and in writing. Ability to work with angry or difficult customers. Skill in operating listed tools and equipment. Ability to accurately read and record data from various types of meter dials. Ability to work in inclement weather. Ability to operate service truck. Digs holes and sets poles for electrical lines. String wire on new construction or in repairing line breaks. Sets and connects transformers and other electrical distribution equipment. Climbs pole's and makes necessary repairs. Trim trees along electrical lines and perform related work as required. Performs related work as required. Responds to work orders for utility disconnections, reconnections, new orders, and other public works service. Maintains are assigned tools and equipment. You must stand on-call after working hours as needed and directed. Class B Lineman is responsible for ensuring safety standards for himself and his crew and is responsible for his/her own safety at all times. Safety should be the number one priority of any apprentice lineman. It is the apprentice lineman's responsibility to report and all accidents/incidents to the foreman immediately and to make the foreman aware of any known potential safety hazards that may exist. Other duties as assigned. Success Factors: Must be able to work outdoors in diverse terrain and in all weather conditions. Physical capabilities required to safely operate a motor vehicle, in all driving conditions Possesses sight, strength and coordination necessary to safely and effectively operate heavy and light equipment and tools. Lifts up to 50 pounds. Climbs poles and works at heights. Duties entail full-body exertion, strenuous lifting, carrying, pushing and pulling. required to stand, walk; and use hands to finger, handle, feel or operate objects, tools, or controls. Specific vision abilities required by this job include close vision, distance vision and the ability to adjust focus. Experience and Education: Two to Three (2-3) years of experience or equivalent hours. Additional Requirements/Licenses/Certifications: Possession of, or ability to obtain, a valid State of Residence Driver License is required. Must have a Valid Class A CDL and current medical examiner card Candidates must pass criminal and Motor Vehicle Record (MVR) background checks and pass a pre-employment drug screen. Must be able to work outdoors in diverse terrain and in all weather conditions. Must complete OSHA 10hr Safety Training Program within 60 days. Completion of formal training program or at least four years of verifiable experience including three years of energized work Successful completion of appropriate knowledge and skills examinations. Compliance with Safety Performance Standards May be Employee Performance Tested to a higher level with testing and verifiable experience Possesses sight, strength and coordination necessary to safely and effectively operate heavy and light equipment and tools. . Completion of Insulate/Isolate Course Critical review and recommendations from Operations, Safety/Training Must have ability for frequent travel on needed training requirements and potential for overtime including storm work. Notes: The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer.

About Us Every moment of every day, people around the world rely on the energy they access through infrastructure built by Quanta. Comprising the largest skilled-labor force in North America, our employees are highly skilled and innovative, continually working to connect people and power. We're building the infrastructure that supports the energy transition, and there are more opportunities than ever to be part of our team. Join us and build your career building a brighter future. Imagine what you could do here. We encourage, inspire, and support our people to seize opportunities in our corporate office and with hundreds of our operating companies worldwide that provide solutions for the utility, renewable energy, electric power, industrial, and communications industries. Quanta actively promotes and maintains a culture of belonging where all employees can be themselves, live their values, and find opportunities to succeed. When you join our team, you join a dynamic organization in which career development is encouraged, excellence is rewarded, and diversity is prized. Come find out how our people power modern life. About this Role Join a Leading Team in Powering the Future! Lindsey Electric, a proud Quanta Services company, is looking for a highly skilled and experienced Lineman to step into a leadership role in the Houston, TX area and surrounding areas. This is more than just a lineman position, it's an opportunity to lead. We're seeking someone with 10-15 years of experience who is ready to take on a foreman or leadership-level role, guiding crews in the installation, maintenance, and repair of overhead and underground power lines and equipment. At Lindsey, you'll be part of a company known for its strong values, commitment to safety, and deep pride in delivering reliable service to the communities we serve. If you're ready to bring your expertise to a place that values hard work and leadership, we'd love to have you on our team. What You'll Do Safely install, maintain, and repair overhead and underground electrical distribution lines and equipment Interpret and work from one-line drawings, schematics, and work orders Operate and maintain tools and equipment necessary for line work, including bucket trucks and digger derricks Respond to outage calls, perform troubleshooting, and restore service efficiently Maintain accurate records of work performed, materials used, and crew activities Work overtime, weekends, and participate in emergency storm response as needed What You'll Bring 10-15 years of verifiable experience as a Journeyman Lineman Valid Class A Commercial Driver's License (CDL) required Strong proficiency in both overhead and underground line work Ability to read and interpret electrical one-line drawings Comfortable working at heights and in varying weather conditions Must be able to work a 4/10 schedule with regular overtime availability What You'll Get As a Quanta Services employee, we offer a wide range of benefits to fit your needs. 401(k) with immediate matching and vesting Fully comprehensive benefits packages; Medical, Dental, Vision Your choice of PPO, HSA, FSA Short term and long term benefits Employee discounts on consumer goods Take-home company truck Gas card Ample overtime opportunities Equal Opportunity Employer All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, national origin or ancestry, sex (including gender, pregnancy, sexual orientation, and/or gender identity), age, disability, genetic information, veteran status, and/or any other basis protected by applicable federal, state or local law. We are an Equal Opportunity Employer, including disability and protected veteran status. We prohibit all types of discrimination and are committed to providing access and equal opportunity for individuals with disabilities. For additional information or if reasonable accommodation is needed to participate in the job application, interview, or hiring processes or to perform the essential functions of a position, please contact us the Company's Human Resources department.

Class A Lineman works in the construction, maintenance and repair of power, transmission, and distribution lines, both overhead and underground while utilizing line trucks, booms, lifts, and wire pulling equipment. Duties and Responsibilities All duties as performed as an Apprentice Line Mechanic A7 plus: Can install, maintain, or repair distribution facilities of all types while energized or deenergized without supervision. Willingness to learn new skills and abilities by participating in continuing education activities. Follow safety standards and procedures. Other duties as assigned by leadership. Qualifications Education & Experience High school diploma or GED required. One and a half years of experience as a Lineman B with Shelton Energy or completion of formal training program with two-year field, or at least four years of verifiable experience including three years of energized work verifiable experience elsewhere. Complete OSHA 10 hr Safety Training Program within 90 days. CDL class A license preferred; must acquire CDL beginners permit within 60 days. Possession of climbing tools preferred. Ability to read and understand minimum approach distances. Desire to learn and commitment to doing quality work while putting safety first. Core Competencies Attention to detail, conflict resolution, team building, mentoring and coaching, business acumen, ethical decision-making and leadership, global and cultural awareness, critical and creative thinking, time management, self-control, ability to adapt to constantly changing circumstances while maintaining a professional demeanor and corporate perspective, results oriented. Working conditions/Physical Requirements/Travel Working Conditions Work sites are outdoors in potentially extreme weather conditions and possible confined space. All worksite safety instructions are written and spoken in English; must be fluent in English. Work includes prolonged and repeated: lifting (including overhead, up to 50lbs); standing; climbing; kneeling; reaching and feeling; crouching and crawling. Work is performed within the “red zone” of heavy equipment. Working safely requires quick/accurate hand-eye coordination and the ability to work in a constant state of alertness and safe manner. Requirements Pass pre-employment, random, post-accident, and reasonable suspicion drug screens. Provide valid US work authorization documents for E-Verify. Satisfactory results of pre-employment background check results. Valid driver's license with clean driving record is required. Pre-employment medical fit-for-duty test; hold/obtain DOT medical card. Ability to wear Personal Protective Equipment (PPE) as dictated by position. With the health and safety of our employees, customers, and the communities we serve in mind, all candidates who receive an offer of employment will be required to complete a COVID-19 risk assessment; your responses will help us determine an employment start date. Travel required. Ability to work on-call, irregular hours, and emergency response. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee Is frequently required to stand; walk; use hands to finger; handle; and fee; and reach with hands and arms. Additional Duties The above statements are typically assigned to employees in this position. They are not to be construed as an exhaustive list of their duties and responsibilities. The Company reserves the right to assign or reassign duties and responsibilities to the job at any time. Direct Reports/Reporting Structure This position has no direct reports. The Class A Lineman reports to the Foreman.

Under the general direction of the Maintenance Shift Supervisor, the Master Electrician performs a variety of skilled electrical trade functions, supporting the installation, maintenance, and repair of electrical systems and equipment critical to plant operations. This role involves working with power generation, distribution, and control systems, ensuring safety, efficiency, and minimal downtime. Based on the founding principles of McWane in 1920, it is expected that all team members will know and exhibit the eight principles of The McWane Way: Safety, Environment, Leadership, Accountability, Excellence, Trust, Teamwork, and Communication as well as the values and behaviors supporting these principles. * Install, maintain, and repair electrical equipment for power generation, distribution, and utilization. * Coordinate, assist, and perform construction, fabrication, installation, and maintenance of generators, transformers, switchboards, controllers, circuit breakers, motors, heating units, and conduit systems. * Solve, locate, and diagnose issues in electrical systems to minimize operational downtime. * Plan, schedule, and assign daily tasks in coordination with the supervisor. * Order and manage electrical parts and materials required for maintenance and installation projects. * Use and maintain electrical hand tools, power tools, measuring instruments, and testing devices. * Assist maintenance mechanics in the repair, dismantling, or reassembly of mechanical equipment. * Read and interpret technical blueprints, schematics, and diagrams, providing guidance to others when needed. * Maintain a clean, safe, and organized work environment, adhering to all safety protocols and procedures. * Follow company safety regulations, ensuring proper use of personal protective equipment (PPE). * Perform other related duties as required to support plant operations. Qualifications * Identify technical malfunctions in electrical units. * Understand the handling and use of electrical repair tools and equipment. * Effectively manage time and coordinate work functions with co-workers. * Excellent written and verbal communication skills. * Work 3rd shift and some weekends. Additional Information All your information will be kept confidential according to EEO guidelines. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. McWane is a Federal VEVRAA contractor, and an Equal Opportunity Employer committed to providing equal employment opportunity in all employment practices. McWane will not discriminate against any applicant for employment because of their race, color, religion, sex, national origin, age, sexual orientation, disability, veteran or service member status, marital status, citizenship status (In IL - sex, including same sex, ancestry, order of protection status, physical or mental disability, military status, pregnancy, unfavorable discharge status, genetic information), (In IA - gender identity), (In CA- gender identity or expression, and genetic information) or any other category protected by federal, state or local law.

Under the general direction of the Maintenance Shift Supervisor, the Master Electrician performs a variety of skilled electrical trade functions, supporting the installation, maintenance, and repair of electrical systems and equipment critical to plant operations. This role involves working with power generation, distribution, and control systems, ensuring safety, efficiency, and minimal downtime. Based on the founding principles of McWane in 1920, it is expected that all team members will know and exhibit the eight principles of The McWane Way: Safety, Environment, Leadership, Accountability, Excellence, Trust, Teamwork, and Communication as well as the values and behaviors supporting these principles. * Install, maintain, and repair electrical equipment for power generation, distribution, and utilization. * Coordinate, assist, and perform construction, fabrication, installation, and maintenance of generators, transformers, switchboards, controllers, circuit breakers, motors, heating units, and conduit systems. * Solve, locate, and diagnose issues in electrical systems to minimize operational downtime. * Plan, schedule, and assign daily tasks in coordination with the supervisor. * Order and manage electrical parts and materials required for maintenance and installation projects. * Use and maintain electrical hand tools, power tools, measuring instruments, and testing devices. * Assist maintenance mechanics in the repair, dismantling, or reassembly of mechanical equipment. * Read and interpret technical blueprints, schematics, and diagrams, providing guidance to others when needed. * Maintain a clean, safe, and organized work environment, adhering to all safety protocols and procedures. * Follow company safety regulations, ensuring proper use of personal protective equipment (PPE). * Perform other related duties as required to support plant operations. Qualifications * Identify technical malfunctions in electrical units. * Understand the handling and use of electrical repair tools and equipment. * Effectively manage time and coordinate work functions with co-workers. * Excellent written and verbal communication skills. * Work 3rd shift and some weekends. Additional Information All your information will be kept confidential according to EEO guidelines. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. McWane is a Federal VEVRAA contractor, and an Equal Opportunity Employer committed to providing equal employment opportunity in all employment practices. McWane will not discriminate against any applicant for employment because of their race, color, religion, sex, national origin, age, sexual orientation, disability, veteran or service member status, marital status, citizenship status (In IL - sex, including same sex, ancestry, order of protection status, physical or mental disability, military status, pregnancy, unfavorable discharge status, genetic information), (In IA - gender identity), (In CA- gender identity or expression, and genetic information) or any other category protected by federal, state or local law.

Under the general direction of the Maintenance Shift Supervisor, the Master Electrician performs a variety of skilled electrical trade functions, supporting the installation, maintenance, and repair of electrical systems and equipment critical to plant operations. This role involves working with power generation, distribution, and control systems, ensuring safety, efficiency, and minimal downtime. Based on the founding principles of McWane in 1920, it is expected that all team members will know and exhibit the eight principles of The McWane Way: Safety, Environment, Leadership, Accountability, Excellence, Trust, Teamwork, and Communication as well as the values and behaviors supporting these principles. Install, maintain, and repair electrical equipment for power generation, distribution, and utilization. Coordinate, assist, and perform construction, fabrication, installation, and maintenance of generators, transformers, switchboards, controllers, circuit breakers, motors, heating units, and conduit systems. Solve, locate, and diagnose issues in electrical systems to minimize operational downtime. Plan, schedule, and assign daily tasks in coordination with the supervisor. Order and manage electrical parts and materials required for maintenance and installation projects. Use and maintain electrical hand tools, power tools, measuring instruments, and testing devices. Assist maintenance mechanics in the repair, dismantling, or reassembly of mechanical equipment. Read and interpret technical blueprints, schematics, and diagrams, providing guidance to others when needed. Maintain a clean, safe, and organized work environment, adhering to all safety protocols and procedures. Follow company safety regulations, ensuring proper use of personal protective equipment (PPE). Perform other related duties as required to support plant operations. Qualifications Identify technical malfunctions in electrical units. Understand the handling and use of electrical repair tools and equipment. Effectively manage time and coordinate work functions with co-workers. Excellent written and verbal communication skills. Work 3rd shift and some weekends. Additional Information All your information will be kept confidential according to EEO guidelines. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. McWane is a Federal VEVRAA contractor, and an Equal Opportunity Employer committed to providing equal employment opportunity in all employment practices. McWane will not discriminate against any applicant for employment because of their race, color, religion, sex, national origin, age, sexual orientation, disability, veteran or service member status, marital status, citizenship status (In IL - sex, including same sex, ancestry, order of protection status, physical or mental disability, military status, pregnancy, unfavorable discharge status, genetic information), (In IA - gender identity), (In CA- gender identity or expression, and genetic information) or any other category protected by federal, state or local law.

Are you ready to advance your career? Discover new opportunities and excitement with Greif. At Greif, we recognize the value of cultivating pipelines of talented individuals at the beginning of their career. Our Global Ealy Career Programs are a strategic investment to build a talented workforce, foster a culture of learning & development, and maintain a competitive edge in the market. Our Apprenticeship Program is a direct path to full-time employment post certification or graduation with a global leader in industrial packaging committed to solving critical challenges worldwide with exceptional customer service and a strong commitment to sustainability. Recognized with the prestigious 2024 Gallup Exceptional Workplace Award and celebrated among Newsweek's Top 100 Global Most Loved Workplaces & Top 100 America's Most Loved Workplaces Greif values each colleague as a vital part of our success. Our dedication to excellence in customer service is driven by innovative strategies and diverse perspectives. As an Apprentice at Greif, you'll embark on a journey of continuous learning and development. You'll receive comprehensive training and mentorship to inspect, repair, and maintain a wide range of equipment. Upon your certification or graduation, you can typically expect an offer of full-time employment to join one of our many Greif locations across the U.S. Looking to join a culture where your contributions make a significant impact, and you are recognized? You've come to the right place! Unlock invaluable experience and propel your career to new heights with an Apprenticeship at Greif! As an Apprentice at Greif you will gain: * Hands-on experience in the maintenance and repair of industrial equipment * On-the-job training and guidance from experienced professionals to supplement your classroom learning program * Opportunities for career advancement based on performance and qualifications You will have the opportunity to: * Learn and apply maintenance procedures for various equipment types * Assist in diagnosing mechanical issues and performing necessary repairs * Follow safety protocols and guidelines at all times * Maintain accurate records of maintenance and repair work * Work collaboratively with experienced technicians and supervisors Qualifications: * Currently enrolled in a Trade or Technical School actively pursuing Certification or an Associate's Degree in a maintenance-related discipline such as Blow molding, Electromechanical, Electrical, Industrial Systems, etc. * High school diploma or equivalent * Ability to work part-time 20 hours per week on-site in Nacogdoches while attending school * Legally authorized to work in the U.S. * Basic understanding of mechanical systems preferred * Willingness to learn and develop technical skills * Strong attention to detail and problem-solving abilities * Ability to work effectively both independently and in a team environment Ready to embark on this exciting journey? We have a place for you here. Apply now! Compensation Range: The pay range for this position is $19.38 - $32.93. Typically, a competitive wage for new hires will fall between $18.00 to $18.00. Offers for this position may vary based on market data and other factors such as job-related knowledge, skills, experience, and geographic location. If the competitive wage is equal in both fields, the starting rate is the same for all applicants that apply for this role. The starting rate is not representative of future compensation increases. The position may also be eligible for a short-term incentive. Benefits Statement: Greif offers a comprehensive benefits package, including medical, dental, paid time off, and other competitive benefits which are available for eligible colleagues effective day one. Protect Yourself From Scams: We value the integrity of our recruitment process and prioritize the well-being of our candidates. While you may find Greif job postings on various platforms, all legitimate opportunities can be verified on our official Careers page at ************** All communication from Greif regarding job opportunities will also come from ************* email address. If you have concerns about the legitimacy of a job posting, receive an unsolicited job offer or suspect fraudulent activity, please contact us for verification via this link Contact Us - Greif. EEO Statement: ******************************************************************************************************* We offer a competitive salary, excellent benefits and opportunity for growth. Greif is an equal opportunity employer. We will not discriminate against any applicant or employee on the basis of sex, race, religion, age, national origin, color, disability, veteran status or any other any other legally protected characteristic. For more information read Greif's Equal Opportunity Policy.

Job Description Install, maintain and repair commercial/industrial electrical systems up to 480 V, ensuring compliance with National Electrical Code (NEC) and Tyler municipal ordinances. Key Responsibilities Lay out, bend and thread conduit; pull, splice and terminate conductors. Read blueprints, one‑lines and wiring diagrams to plan cable routes and panel locations. Test continuity, voltage and amperage; troubleshoot faults with multimeters/megohm testers. Install MCCs, VFDs, lighting and motor‑control circuits; size breakers and fuses. Complete permits, inspection requests and red‑line drawings; mentor apprentices. Enforce lock‑out/tag‑out and NFPA 70E arc‑flash safety procedures. Required Skills & Qualifications Texas Journeyman Electrician License (TDLR). 4+ yrs experience in industrial or commercial construction/service. Strong knowledge of 3‑phase distribution, motor controls and NEC Article 430. Ability to work from lifts, ladders and confined spaces; lift 75 lbs. Preferred Experience with PLC I/O wiring, fire‑alarm or low‑voltage control systems; OSHA 30.

Positions Summary: Install, construct, maintain, and repair various electrical systems, components, and machines in industrial and commercial locations. Essential Duties and Responsibilities: * Proficient with PLC installing, troubleshooting, resetting, and operation * Bends and installs all sizes and types of conduit and other raceways in a neat and workmanlike manner * Installs all sizes and types of conductors (including power and telecommunications) in conduit, cable trays and other raceways. * Terminates and/or connects wire to terminal strips, lugs, instruments, devices, relays, and other control devices * Installs circuit breakers, equipment, panels, transformers, switchboards, boxes, and devices * Works with blueprints, schematic drawings, sketches, and line diagrams. * Work directly with management * Will work alongside others on the jobsite - including electrical work, welding, insulating, and any other tasks as required. * Must complete probationary period and no more than 3 points. * Watch over day-to-day safety, productivity, accuracy, materials, rental equipment and workmanship of each project . Oversee completion of wok * Plan and schedule, review and approve all work to be performed on jobsite * Communicate effectively with customers, co-workers and subcontractors * Interpret documents such as: safety rules, operating and maintenance instructions and procedure manuals * Calculate figures and amounts such as: proportions, percentages, area, circumference and volume * Solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists * Write routine reports & correspondence * Fit and install iron pipe and structural steel (including welding) * Install electrical conduit and wire * Insulate pipe and tanks Certifications: State Journeyman "General Electrician" License * 3 - 5 years of experience in an industrial setting * Ability to apply concepts of basic algebra and geometry. * Strong background in motor controls and wire three phase motors preferred. * Ability to prioritize and handle multiple tasks and projects simultaneously. * Ability to perform heavy physical activity performing strenuous daily activities of a primarily technical nature. EOE, including disability/vets

WES is seeking an E & I Foreman - Electrical, who will lead a Team in achieving operational goals through improved runtime and reduced callouts in the Delaware Basin. Ensuring proper compliance with environmental, federal, and company standards. This person will manage teams operating and maintaining equipment and instrumentation for automated controls at plant facilities. Roles and Responsibilities: * Leads a E & I field team in achieving Delaware Basin Midstream operational goals. * Assure proper training for all team members in safely troubleshooting AC power electrical equipment as well as DC control circuits. * Maintain electrical switchgear, substations, & overhead distribution as well as motors and controls. * Assist the overall Delaware Basin Midstream operations team in the daily economic optimization of operations. * Supports Planning and Field Accounting with budget reviews and research related to discrepancies, and also supports Field Accounting with OPEX accruals. * Directs and oversees onsite project teams, ensuring projects are completed according to project plans. * Coordinates staff and teams needed to accomplish project goals, including supervisor, engineering, and management. * Participates in Emergency Management Training and Tabletop exercises. * Ensures contractors adhere to WES best practices and safety procedures, with the authority to stop work. * Participates in projects with corporate teams. * Provide team members with on-the-job, informal, and formal skill development opportunities. * Develop relationships with third-party customers and producers. * Ensure accurate, timely data is entered and recorded within operational and business software applications. * Accomplish the job following WES core values. Education and Experience: * High School Diploma or GED required. An associate or higher degree in an applicable subject area is desirable. * Bachelor's degree, Trade school, applicable professional certification, or applicable work experience preferred. * 7+ years of relative work experience. * Previous demonstration of leadership experience. * Strong grasp of PSM workflows and processes. (PHA, MOC, Training, etc.) * A strong hands-on and working knowledge of plant & field equipment such as gas engines, compressors, pumps, air compressors, coolers, heaters, and fans. Skills & Competencies: * Fully qualified in safe operations of all tools and equipment. * Journeyman license or higher preferred. * Demonstrate technical expertise in the field and serve as a mentor to other operational personnel. * Apply extensive experience to issues/assignments. * Address complex and escalated issues in a safe and timely manner. Travel Requirements: * The percentage of travel required for this position is 0 - 10%. Work Schedule: * This position is on a 5/2 shift schedule and may be required to work overtime, weekends, and holidays. Western Midstream does not offer sponsorship of employment-based nonimmigrant visa petitions for this role. Western Midstream is an equal opportunity employer committed to diversity in recruiting, hiring, developing, compensating and promoting applicants and employees. All employment decisions are made without regard to sex, race, color, religion, national origin, citizenship, age, disability, marital or veteran status, sexual orientation, gender identity or expression, or any other legally protected categories. This includes providing reasonable accommodation for employee's and applicant's disabilities or religious beliefs and practices. To learn more about our Pay-for-Performance Compensation and our comprehensive benefits package, click here

Responsible for assisting the Assistant Superintendent or Project Manager on large project or several small projects. Small job responsibilities would be for total project with support from the home office project manager. On a larger project with several foreman, and several crews of craftsmen, responsibilities would be an area or scope of work such as electrical or pneumatic as designated by the site superintendent with the support of the field project staff. Qualification Requirements High School Diploma or GED (High School Equivalence Certificate). Required 4 years in construction with 2 years of previous supervisory experience in a construction craft area. Must have the ability to read, write, and communicate in English. Journeyman Electrician License issued in Texas. NCCER certification. TWIC required. Must have valid Texas Driver's License with minimal infractions. Knowledge, Skills, and Abilities Managing one's own time and the time of others. Adjusting actions in relation to others' actions. Teaching others how to do something. Considering the relative costs and benefits of potential actions to choose the most appropriate one. Talking to others to convey information effectively. Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times. Essential Functions Examine and inspect work progress, equipment, and construction sites to verify safety and to ensure that specifications are met. Train workers in construction methods, operation of equipment, safety procedures, and company policies. Read blueprints to determine construction requirements and to plan procedures. Assign work to employees, based on material and worker requirements of specific jobs. Confer with managerial, technical personnel, other departments, and contractors to resolve problems and to coordinate activities. Estimate material and worker requirements to complete jobs. Physical Demands Position requires to work in: climbing, bending, sitting, walking, kneeling, crawling, pushing, pulling, and lifting. Work Environment Is frequently exposed to variable weather conditions. Must be able to work in elevated positions.

Job Title: Apprentice Lineman Reports to: Distribution Crew Foreman FLSA Status: Non-Exempt Work Schedule: Full Time The Apprentice Lineman is an entry-level role that plays a crucial part in the construction, maintenance, and repair of electrical overhead distribution systems. This position requires working at various job sites, often outdoors in different weather conditions, and may involve travel based on customer needs. The role demands a commitment to safety, teamwork, and the ability to perform physically demanding tasks. To accomplish this job successfully, an individual must be able to perform, with or without reasonable accommodation, each essential function satisfactorily. Essential Functions: Safety Compliance: Always work safely, whether performing new construction, maintenance, or repair work on energized and de-energized overhead systems, following safety protocols and guidelines. Overhead Line Work: Assist in stringing overhead wires, setting poles, and anchors, and installing transformers, lightning arrestors, cutouts, crossarms, insulators, switches, and switchgear. Electrical Equipment Handling: Aid in replacing fuses in transformers, clearing faulted circuits, and installing/removing services on overhead distribution lines. Equipment Maintenance: Maintain company vehicles, tools, and equipment in good working condition and report any issues promptly. High Voltage Handling: Work with energized high-voltage systems with appropriate skills and caution, ensuring personal and team safety. Basic Rigging & Hand Tools: Understand and utilize basic rigging techniques, hand lines, and knot tying, ensuring the proper use and maintenance of tools. Transformers & Voltage Knowledge: Assist with the installation and hook-up of single-phase transformers and have the ability to identify primary and secondary voltages on circuits. Bucket Rescue & Safety: Capable of performing basic bucket rescue/escape and demonstrate knowledge of minimum approach distances and the use of personnel protective equipment (PPE). Grounding & Rigging: Understand equipment setup and grounding procedures, as well as the proper use of Kellum grips and other linework materials. Physical Labor & Climbing: Perform physically demanding tasks, including climbing different types of structures (wood, steel, etc.) and working at heights or in confined spaces. Environmental Adaptability: Work efficiently in various weather conditions, including extreme heat, cold, rain, or snow, ensuring safety and effectiveness. Communication & Teamwork: Communicate effectively using company radios, follow directions, and collaborate with team members to complete assigned tasks. Compliance & Inspection: Properly inspect rubber goods, PPE, and other safety equipment, ensuring compliance with company and industry standards. Other Functions: Willingness to work live high-voltage distribution lines using appropriate protective gear. Assist with other tasks and projects as assigned by the Distribution Crew Foreman. Position Qualifications: High School Diploma or GED. Valid Class A CDL preferred but not required. Must be able to obtain Class A CDL License within 6 months of hire. Must pass a background check, MVR check, pre-employment drug screen, and physical examination. Experience & Skills: No Experience required. Ability to work effectively in a team environment and maintain a positive attitude, even in high-pressure situations. Strong communication skills and the ability to follow instructions. Willingness to learn and adapt to different tasks, equipment, and safety procedures. Basic knowledge of electrical systems and linework materials is an advantage. Physical Requirements: N (Not Applicable) Activity is not applicable to this position. O (Occasionally) Position requires this activity up to 33% of the time F (Frequently) Position requires this activity from 33% - 66% of the time C (Constantly) Position requires this activity more than 66% of the time Activity Frequency Stand Constant (C) Walk Constant (C) Sit Occasionally (O) Kneel/Squat Frequently (F) Grasp Frequently (F) Climb Stairs Occasionally (O) Work Environment: This job operates in an outdoor field setting. Exposer to extreme weather may be applicable. The company has reviewed this to ensure that essential functions have been included. It is intended to provide guidelines for job expectations and the employee's ability to perform the position described. It is not intended to be construed as an exhaustive list of all functions, responsibilities, skills and abilities. Additional functions and requirements may be assigned by management. This document does not represent a contract of employment, and the company reserves the right to change this job description and/or assign tasks for the employee to perform, as the company may deem appropriate.

5 Star Electric, LLC (5 Star) is a premier full-service provider of electrical construction, maintenance, and repair services with offices in Western Kentucky and Dallas/Fort Worth, Texas. 5 Star specializes in Distribution and Transmission Power Line work, Substation, Industrial, Commercial, Streetlighting, and Fiber installations. Position Title: Transmission Lineman - C Class Our Core Values: Guided by Safety. Focused on Communities. Powered by Care. Essential Functions: Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. The Transmission Lineman - C Class is responsible for all Groundman/Apprentice 1 responsibilities in addition to working de-energized lines and equipment. Roles and Responsibilities: Thorough knowledge of methods, practices and equipment of electrical line work. Thorough knowledge of the hazards of electrical work and necessary safety precautions. Ability to climb poles and perform strenuous duties in a variety of weather conditions. Ability to follow oral and written instructions and communicate effectively verbally and in writing. Ability to work with angry or difficult customers. Skill in operating listed tools and equipment. Ability to accurately read and record data from various types of meter dials. Ability to work in inclement weather. Ability to operate service truck. Digs holes and sets poles for electrical lines. String wire on new construction or in repairing line breaks. Sets and connects transformers and other electrical distribution equipment. Climbs pole's and makes necessary repairs. Trim trees along electrical lines and perform related work as required. Performs related work as required. Responds to work orders for utility disconnections, reconnections, new orders, and other public works service. Maintains are assigned tools and equipment. You must stand on-call after working hours as needed and directed. Class C Lineman is responsible for ensuring safety standards for himself and his crew and is responsible for his/her own safety at all times. Safety should be the number one priority of any apprentice lineman. It is the apprentice lineman's responsibility to report and all accidents/incidents to the foreman immediately and to make the foreman aware of any known potential safety hazards that may exist. Other duties as assigned. Success Factors: Must be able to work outdoors in diverse terrain and in all weather conditions. Physical capabilities required to safely operate a motor vehicle, in all driving conditions Possesses sight, strength and coordination necessary to safely and effectively operate heavy and light equipment and tools. Lifts up to 50 pounds. Climbs poles and works at heights. Duties entail full-body exertion, strenuous lifting, carrying, pushing and pulling. required to stand, walk; and use hands to finger, handle, feel or operate objects, tools, or controls. Specific vision abilities required by this job include close vision, distance vision and the ability to adjust focus. Experience and Education: One to Two (1-2) years of experience or equivalent hours. Additional Requirements/Licenses/Certifications: Possession of, or ability to obtain, a valid State of Residence Driver License is required. Must have a Valid Class A CDL and current medical examiner card Candidates must pass criminal and Motor Vehicle Record (MVR) background checks and pass a pre-employment drug screen. Must be able to work outdoors in diverse terrain and in all weather conditions. Must complete OSHA 10hr Safety Training Program within 60 days. Completion of formal training program or at least four years of verifiable experience including three years of energized work Successful completion of appropriate knowledge and skills examinations. Compliance with Safety Performance Standards May be Employee Performance Tested to a higher level with testing and verifiable experience. Completion of Insulate/Isolate Course Critical review and recommendations from Operations, Safety/Training Must have ability for frequent travel on needed training requirements and potential for overtime including storm work. Notes: The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer.