Line up worker jobs in Gibsonton, FL - 91 jobs

Requirements Work Schedule & Environment: Monday - Friday, 7:00 AM - 4:00 PM (One-hour lunch break) Work Setting: Warehouse/production environment with moderate to loud noise levels (forklifts, tools, etc.) Physical Requirements: ? Ability to stand, walk, and work with your hands for extended periods ? Lift and move up to 50 lbs ? Work near moving mechanical parts and exposure to industrial chemicals (safety measures in place) ? Reasonable accommodations available for individuals with disabilities

The Laborer / Pipe Layer primary function involves manual labor working outside with your hands on a pipe crew for the installation of many different types of pipe. Must work productively and safely, consistently meet the production goals as set by the Foreman, Superintendent or Project Manager. Responsibilities Work safely to prevent on the job accidents and injuries, wear all site specific mandated protective equipment including but not limited to hard hat, hearing protection, safety-toe boots and safety glasses Manually maneuver pipe Lift a minimum weight of 100 pounds Shovel rock, dirt, or sand Swing a sledgehammer Lay pipe Figure grades Climb in and out of excavations by ladder or earthen ramp Manually carry materials including bags of concrete, lumber, plastic pipe, grates, castings, etc Responsible for the care and storage of all tools they use and clean up. Ability to lift objects, walk and stand for long periods of time and perform strenuous physical labor under adverse field conditions Ability to communicate orally and in writing, understand, follow and transmit written and oral instructions Must have transportation to and from various jobsite Ability to operate equipment and tools properly and safely Must meet attendance schedule with dependability and consistency Exercises their right, responsibility and obligation to stop work when knowledgeable of job hazards Work outside in the elements Able to respond quickly and willing to assist with any job duties asked by Foreman Be able to work well in a group setting as well as individually at times Self-sufficient Able to follow instruction Adhere to all traffic laws, ordinances, and rules involved in heavy equipment operation Ability to read, understands, follow, and enforce safety procedures and prepare written reports and forms Work independently in the absence of supervision Adhere to OSHA safety requirements. Wear mandated protective equipment and clothing Complete and pass all training requirements and attend all safety training programs as required Exercise the right, responsibility, and obligation to stop work when knowledgeable of job hazards Ability to work safely in a wide variety of climatic conditions and job site environments commonly found at Moretrench job sites Complete and pass annual phosphate training and attend all safety training programs related to job Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. All employees are expected to adhere to the safety policies of Moretrench and the clients for whom we work. Following the safety policies of Moretrench Industrial, Inc. is a condition of employment and is everyone's responsibility Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments Work in a TEAM environment - Gives and welcomes feedback; Contributes to building a positive team spirit Oral Communication - Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions; Demonstrates group presentation skills; Participates in meetings Ethics - Treats people with respect; Keeps commitments; Inspires the trust of others; Works with integrity and ethically; Upholds organizational values Adaptability - Adapts to changes in the work environment; Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events Attendance/Punctuality - Is consistently at work and on time Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Commits to long hours of work when necessary to reach goals.; Completes tasks on time or notifies appropriate person with an alternate plan Attend and participate in weekly "Tool-box" safety meetings Must have safety steel-toe, or composite material, work boot (other safety requirements provided by employer upon hire) and normal wear and tear; however are employees responsibility if misplaced or misused) Problem Solving - Identifies and resolves problems in a timely manner; Works well in group problem solving situations; Uses reason even when dealing with emotional topics Interpersonal Skills - Focuses on solving conflict, not blaming; Listens to others without interrupting; Keeps emotions under control; Remains open to others' ideas and tries new things Must be able to communicate in English Qualifications Minimum 5 years' experience operating multiple pieces of heavy equipment at Class A operator level Extensive experience in heavy equipment operations involving mass excavations; clearing and grubbing; backfilling and compacting; excavating and pipe laying; and construction and maintenance of embankments, berms, and dikes In the case of a truck loading excavator, the ability to fully and safely load loads trucks in an efficient manner to meet the goals of the project Demonstrate the skills of a finish grade operator (tolerance of 1/10 of a foot or better) on at least one piece of equipment, dozer or excavator Skilled and fully competent in using GPS system as a grading tool to achieve grades Skilled at the practice of operating safely on worksites according to OSHA, MSHA and Moretrench safety protocols and requirements Note that all job site locations are remote and temporary, so a form of transportation is required. The vast majority of our work is within a 1 hour drive of Riverview, FL (just outside of Tampa) so our personnel do very little travel Valid Florida driver's license, or the equivalent Able to operate heavy machinery for long periods, including evenings and weekends when necessary Must be able to operate machinery in all weather conditions and terrains Must be able to lift 25 pounds at a time Additional Eligibility Qualifications (Project Specific) Must be 18 years or older and have a valid and appropriate state driver's license prior to employment Valid Drivers License Detailed Back-Ground Check Job may require out of town and even overnight travel Competencies / Technical Capacity Regularly works near moving mechanical parts and in outside conditions that include inclement weather. Requires good manual dexterity (hand, hand with arm, two hands) and multi-limb coordination Time Management. Thoroughness. Customer/Client Focus Work Environment While performing the duties of this job, the employee regularly works in outside weather conditions. The employee frequently works near moving mechanical parts and is frequently exposed to wet or humid conditions and vibration. The employee occasionally works in high, precarious places and is occasionally exposed to fumes or airborne particles, toxic or caustic chemicals, and risks of electrical shock. The noise level in the work environment is usually loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to use hands and fingers to handle, feel or operate objects, tools or controls, and reach with hands and arms. The employee is frequently required to stand, talk and hear. The employee is occasionally required to walk, sit, climb, balance, stoop, kneel, crouch, crawl, taste and smell. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus Strength Standing 70% Walking 20% Sitting 10% Lifting - 50 LB Carrying - 50 LB Preferred Education and Experience Any combination of education and experience that demonstrates the knowledge and ability to perform the work. Additional Information Salary Range: $18.00 - $22.00 / hr Actual salary will be based on a variety of factors including relevant internal and external experience, knowledge, skills, scope of job, geographical location or other factors permitted by law Benefits 401(k) + matching Health, Dental, Vision insurance Life insurance Paid time off (PTO) Holiday Pay Moretrench Industrial is an Equal Opportunity Employer. We encourage qualified women, minorities, veterans, individuals with disabilities, and others to apply.

Job will consist of new construction or restoration on docks, boathouses, seawalls, retaining walls, boat-lifts, decks, set piling, boardwalks, and dune walkovers for commercial, residential marine, and shoreline projects. Qualifications Make accurate cuts of wood and other materials using table and chop saws and other related power tools Framing and rough out carpentry Having own tools is a plus Ability to lift 80lbs Can work in and around water and able to Swim Good communication skills - Speak English Must have reliable transportation and be dependable Hours are M-F 6:45am- 3:15pm.

Job Description About Us Since 1976, Shenandoah has been a trusted leader in the trenchless construction industry, combining decades of experience with cutting-edge technology to deliver turnkey solutions. Our extensive fleet-including hydraulic cleaning trucks, video inspection units, test and seal equipment, and heavy machinery-allows us to manage projects of any size, backed by a skilled team of managers, estimators, and superintendents. We are equipped to mobilize crews beyond our target area to provide reliable, efficient service wherever it's needed. For over 40 years, we have partnered with our customers to extend the life of their infrastructure, maximize budgets, and implement strategic maintenance and rehabilitation programs. By staying at the forefront of industry-changing technologies, Shenandoah ensures every project is completed safely, efficiently, and to the highest standards, delivering long-term value and peace of mind to our clients. Position Overview We are seeking a dedicated and hardworking laborer/crew member to join our pipeline rehabilitation team. In this role, you will assist with projects such as slip lining, drainage repair & installation, and canal & lake bank restoration. This is a hands-on position that requires operating small tools and equipment and working closely with a crew in various weather conditions. What You'll Do Work with a crew on pipeline rehabilitation projects Operate small tools and equipment (pumps, gas saws, compactors, bobcats, backhoes) Assist with underground utility construction tasks on-site Ensure safe work practices and compliance with company standards Communicate effectively with supervisors and team members Required Qualifications Underground utility construction experience preferred Desire and eagerness to learn a skilled trade Positive attitude, customer service skills, and strong communication abilities Mechanical aptitude Ability to complete and pass a drug screening and background check Valid Florida driver's license with a clean driving record (MVR check required if operating company vehicles) Willingness to work in all weather conditions Work Schedule Monday - Friday Home daily Overtime & weekend availability as needed Perks of the Job Weekly Pay 401(k) + Company Match Comprehensive Medical, Dental, Vision, and Disability Insurance Company-paid life insurance Paid Time Off (PTO) Paid orientation & training Safety equipment provided Performance bonus & safety bonus Shenandoah is an Equal Employment Opportunity (EEO) employer committed to fostering a diverse and inclusive workforce.

Work with a team to assemble mattresses using established work instructions. Essential Duties and Responsibilities • Assembles mattress units per established work instructions using a variety of pneumatic tools (e.g. c-ring hog-ring guns, staple guns, hot glue guns) • This includes the assembly of Hot Melt Bond (HMB) units on the HMB machine; application of various, specified upholstered layers to HMB and open coil units; foam-encased pocketed coil units; application of specified upholstery layers; and final mattress assembly • Prepares and organizes components for final assembly and restock raw materials at point of use • Inspects mattress components and finished units for unacceptable flaws or structural defects • Performs all duties according to established safety and efficiency procedures and maintains workstation in a neat, clean and orderly fashion Starting Wage is $15.00/hr Requirements MINIMUM QUALIFICATIONS (KNOWLEDGE, SKILLS, AND ABILITIES) • 1 year Distribution and/or production environment with some disagreeable elements such as noise dust and heat. • Demonstrated proficiency in reading, math, written skills and manual dexterity • Ability to communicate clearly, both verbally and in writing, required. • Knowledge of manufacturing or supply chain industry a plus • Bi-lingual in Spanish/English beneficial • Must be physically able to perform efficiently all duties of the position with, or without reasonable accommodation. Duties require lifting, carrying, prolonged standing, walking, pushing, bending and reaching, and may involve the handling of up to 50 pounds. PHYSICAL DEMANDS AND WORK ENVIRONMENT The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. While performing the duties of this job, the employee is regularly required to use hands to handle or fell and talk or hear. The employee is frequently required to reach with hands and arm. The employee is occasionally required to stand; walk and stoop, kneel or crouch. The employee must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. High noise level in the work environment can be constant or intermittent. The employee is occasionally exposed to hot and cold temperatures in the work environment.

GARNEY CONSTRUCTION A Laborer position is available in Sarasota, FL. This position is for a dependable person who wants to assist in daily tasks and learn the essential skills to start a career in the construction industry. This is an excellent opportunity to start your career while earning highly competitive weekly pay starting at $20 per hour, industry-leading benefits, and an opportunity for overtime work. WHAT YOU WILL BE DOING This position is focused on assisting the crew with the completion of daily tasks with the use of a variety of techniques and equipment. Examples of daily tasks: Maintaining and operating pneumatic and electrical tools, such as concrete vibrators, compactors, concrete saws, cut-off saws, jackhammers, and hand-operated trenchers. Lifting, carrying, and holding building materials, tools, and supplies. Joining, wrapping, sealing, and bedding sections of underground pipe and pipe penetrations. WHAT WE ARE LOOKING FOR We are looking for hard-working individuals who enjoy being active and working on their feet throughout the day. The ideal candidate must also be able to use essential tools such as tape measurers, hammers, tool belts, and lineman pliers to perform their assigned tasks accurately. Requirements: Must be able to work on their feet for an entire day. Must be willing to complete OSHA 10 (provided by Garney). Must be willing to complete “Fall Protection Certification” (provided by Garney). Must be willing to work overtime. Must have access to reliable transportation. Must be willing to travel for work. LET'S TALK THE PERKS! Starting pay of $20 per hour. Employee Stock Ownership Plan (ESOP) & 401K Retirement Plan. Health, Dental, Vision, and Life Insurance. Health Savings Account (HSA) / Flexible Spending Account (FSA). Long-term Disability, Wellness Program & Employee Assistance Plans. Holidays and PTO CONTACT US If you are interested in this Laborer position in Sarasota, FL then please APPLY NOW. For other opportunities available at Garney Construction go to careers.garney.com.

Application Instructions Please read all questions carefully and answer honestly to your best ability. You will be contacted if your job qualifications match the needs of our various project teams and locations. Summary/Objective We recruit highly skilled individuals for a variety of disciplines in the construction field. A skilled craft worker is an essential cog in the wheel of any Superior Construction project. Qualified applicants will have experience working on Heavy Civil, Roadway or Bridge Projects. Applicant must be familiar with working from heights and/or Manlifts. Your role within the company will include participation in site safety, protection of the environment, and construction of exciting and challenging projects. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Performs a variety of tasks involving strenuous manual labor in heavy/highway construction projects. * Maintains a clean and well-organized job site: properly store consumable materials, picks up debris and waste for proper disposal, maintains equipment appearance, and secures/stores small tools and supplies. Performs materials handling and storage. * Road widening, highway, road/street or bridge build and rehabilitation projects. * Helping Foremen and other Supervisors as needed. * Laborers may be required to assist with traffic control and/or flagging operations. * Properly secure and store all tools, equipment, and materials at the end of each workday. Other * Understand and comply with all Company Safety policies and procedures as well as OSHA Regulations. * Assists with loading and unloading trucks & deliveries. Competencies * Detail oriented * Stress Management/Composure. * Process driven * Teamwork orientation Supervisory Requirements This position has no supervisory responsibilities. Work Environment This is field based role. The employee will be working on heavy civil and highway construction sites. The noise level in the work environment and job sites can be loud. The position regularly works near moving mechanical parts and in outside conditions that include inclement weather, heat, and humidity, and exposure to dust and asphalt. Physical Demands The position lifts heavy objects, walks, and stands for long periods of time, and performs physical labor under adverse field conditions. The employee lifts, pushes, pulls, or carries objects and uses abdominal and lower back muscles to provide support over time without fatigue. The position requires good manual dexterity (hand, hand with arm, two hands) and multilimbed coordination. The employee must have excellent stamina. Position Type/Expected Hours of Work This is a full-time position. This position will occasionally require long hours and weekend work. Average +/-50 hours per week. Travel The role requires no travel. Required Education and Experience * Must adhere to OSHA safety protocol and work in a drug-free environment * Must be reliable/have reliable transportation Preferred Education and Experience * Construction industry experience preferred * Takes full ownership of assigned projects and can work independently Additional Eligibility Requirements * Must possess or be able to obtain a valid and appropriate state driver's license before employment. * OUR MISSION AND VISION We are an American family-owned and operated heavy civil contractor dedicated to providing innovative solutions to help meet the nation's growing infrastructure needs. To be America's preferred heavy civil contractor, expanding our markets and services while staying true to our family-oriented culture and fostering an environment where our employees can prosper. Our Core Values: * Family * Safety * Integrity * Innovation * Commitment * Empowerment Equal Opportunity Employer Upon hire, you will be provided with a copy of your specific . Please note s are not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. THE COMPANY RESERVES THE RIGHT TO MODIFY, INTERPRET, OR APPLY THIS IN ANY WAY THE COMPANY DESIRES. THIS IN NO WAY IMPLIES THAT THESE ARE THE ONLY DUTIES, INCLUDING ESSENTIAL DUTIES, TO BE PERFORMED BY THE EMPLOYEE OCCUPYING THIS POSITION. THIS JOB DESCRIPTION IS NOT AN EMPLOYMENT CONTRACT, IMPLIED OR OTHERWISE. THE EMPLOYMENT RELATIONSHIP REMAINS "AT-WILL." QUALIFIED EMPLOYEES WHO, BECAUSE OF A PHYSICAL OR MENTAL IMPAIRMENT THAT SIGNIFICANTLY LIMITS A MAJOR LIFE ACTIVITY, REQUIRE A REASONABLE ACCOMMODATION TO PERFORM THE ESSENTIAL FUNCTIONS OF THIS POSITION SHOULD NOTIFY THEIR MANAGER OR HUMAN RESOURCES. Accessibility: If you need an accommodation as part of the employment process please contact Human Resources. Superior Construction provides equal opportunity employment to all individuals regardless of their race, color, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law.

Job Title: Cable Assembler Duration: 12/9/2025 -3/8/2026 Pay Rate: $18.00 -$22.00 per hour (OT after 40 hrs) Shift Timings: Mon-Thurs, 5: 00 AM -3: 30 PM (4/10 schedule) Job Description: This role is for a Cable Harness and Soldering Assembler. The candidate will be responsible for assembling cable harnesses and related wiring components following established quality, safety, and production standards. High mechanical aptitude is required. Key Responsibilities: Assemble cable harnesses per print, work instructions, and diagrams. Use hand tools to strip, crimp, solder, and terminate copper and coax wires. Follow IPC-A-610 and IPC-WHMA-A-620 standards (experience preferred). Read and interpret wiring diagrams and assembly drawings. Conduct visual inspections to ensure workmanship quality. Maintain a clean, organized, and safe work area. Required/Preferred Skills: 1-2 years experience in cable harness assembly (preferred). Experience with IPC-A-610 and IPC-WHMA-A-620 requirements (preferred). Ability to use hand tools such as crimpers, strippers, and soldering tools. Ability to read and follow wiring prints and assembly instructions. Strong attention to detail and mechanical aptitude. Must be able to read and write English.

Plant Laborer Cast-Crete USA, LLC is Florida's leading manufacturer and distributor of precast and prestressed products with branch operations located throughout the state. Our production facility and corporate headquarters are located in the Tampa area. This position would require standing, walking and lifting up to 25 pounds throughout the day. You may be subjected to adverse weather conditions. Essential Duties and Responsibilities: · Daily lifting, carrying and repetition motion throughout the day · Maintain clean work area through good housekeeping practices · Work well with others in a team environment · Reliability and dependability · Ability to meet deadlines in a timely manner Background and Experience: · Full time shift · Must be able to lift up to 25-50 pounds Job Type: Full-time Benefits: 401(k) Dental insurance Health insurance Vision insurance Schedule: 40 hours/week Overtime as needed Monday to Friday Weekends as needed Experience: Construction: 1 year (Preferred) Ability to Commute: Seffner, FL 33584 (Required)

As a leader and innovator in the snack food industry for over 50 years, J&J Snack Foods provides branded snack foods to foodservice and retail supermarket outlets across the U.S. Its products include such icons as SUPERPRETZEL, ICEE, and Dippin' Dots along with other key brands like LUIGI'S Real Italian Ice, The Funnel Cake Factory Funnel Cakes, and Hola Churros. J&J also has a strong presence in bakery providing cakes, cookies, and pies to some of the largest grocery and convenience retailers in industry. Our company continues to deliver record sales led by a talented team and a commitment to “Fun Served Here”. POSITION SUMMARY: This position is responsible for the production of frozen novelty ice cream. The Production employees are responsible for making the product and running the vitaline machines based on the schedule provided by senior management. This includes, but not limited to, standing for the entire shift the inspection of the popsicles, or cups, from a moving conveyer system, product fill, and inspect the seal on paper wraps, or lids. Must be capable of learning the product and company's requirements of final product expectation. The Line Worker must be able to inspect, and work from a fast-moving conveyer system coming from filler machine for quality. This function may require lifting up to, and including, fifty pounds (50 lbs) throughout the shift. Additionally, this position requires adherence to Housekeeping, Good Manufacturing Practices (GMP), Safety and all other Company Rules and Policies. ESSENTIAL FUNCTIONS: (Including but not limited to) inspecting the quality of the final product after filling. Adhere to all environmental, health and safety requirements and procedures. Responsible for food safety and quality. COMPETENCIES: To perform this job successfully, the Machine Operator Line Worker must be self-motivated, able to problem solve, detail-oriented, and able to stay on task. The requirements listed below are representative of the knowledge, skill, and/or ability required. Job knowledge Problem solving Teamwork Interpersonal skills/communication Product knowledge- The line worker must be able to inspect and work from a fast-moving conveyer system. Make decisions regarding the quality of final product. The employee must be able to work well with others and independently. Technical knowledge and skills- Good hand coordination; Good visual ability. EDUCATION AND EXPERIENCE: High School diploma or GED TRAVEL REQUIREMENTS: N/A Physical Activities Check all that apply Frequency (N) Never, (O) Occasionally or (C) Constantly Ascending or descending ladders, stairs, scaffolding, ramps, poles, and the like. O Moving self in different positions to accomplish tasks in various environments including tight and confined spaces. O Remaining in a stationary position, often standing, or sitting for prolonged periods. C Moving self to accomplish tasks or moving from one worksite to another. O Adjusting or moving objects up to 15 pounds in all directions. C Communicating with others to exchange information. C Repeating motions that may include the wrists, hands and/or fingers. C Operating machinery and/or power tools. O Operating motor vehicles or heavy equipment. N Environmental Conditions Check all that apply Frequency Low temperatures. C High temperatures. N Outdoor elements such as precipitation and wind. N Noisy environments. C Hazardous conditions. O Poor ventilation. N Small and/or enclosed spaces. N Physical Demands Frequency Sedentary work that primarily involves sitting/standing. C Light work that includes moving objects up to 20 pounds. C Medium work that includes moving objects up to 50 pounds. C Heavy work that includes moving objects up to 100 pounds or more. N US Hourly Pay Range $17 - $18 USD Disclaimer: This position description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the team member. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. EEO Statement: J&J Snack Foods Corp.is an equal opportunity employer and prohibits discriminatory employment actions against, and treatment of, employees and applicants for employment based on actual or perceived Federal, State and local laws that prohibit employment discrimination on the basis of race, color, age, national origin, ethnicity, alienage, religion or creed, gender, gender identity, pregnancy, marital status, sexual orientation, citizenship, genetic disposition or characteristics, disability or veteran's status, sex offenses, prior record of arrest or conviction, genetic information or predisposing genetic characteristic, status as a victim or witness of domestic violence, sex offenses or stalking and unemployment status.

Job DescriptionJoin Our Dynamic Team as a Production Assembler in Clearwater, FL! Work Now Staffing is excited to announce openings for Production Assemblers with our top-notch client in Clearwater, FL. If you're ready to be part of a fast-paced, high-energy team and make a difference every day, we want you! Pay: $16.50 per hour Shift: 1st Mon-Thurs - 6:00am - 4:30PM Job Details: The Production Worker works alongside and with the team, stepping in as needed to ensure maximum productivity. The Production Worker helps in following and enforcing all safety, quality policies/procedures, as well as adherence to PPE/hygiene policies. Details: Respectfully support and follow direction from all managers and supervisors about line performance Keep track of line count Work to continuously improve in all areas Ensure all actions better the business and do not break any company policies Reports defective materials or questionable conditions to the Quality Assurance and/or Supervisor Maintains the work area and equipment in a clean and orderly condition and follows prescribed safety regulations. Completes tasks as directed by with minimum supervision Update production numbers in the computer system; must be able to use a computer and type/data Essential Duties: Building Lightray equipment; LR3's, LRI's Soldering experience, will be focused on building light trains Also will work at different station building control boxes, reels, etc Minimum Skill Requirements: High school diploma or GED 2-3 years of related experience preferred Must be at least 18 years old Must be able to read, write and speak English Must be willing and able to work entire schedule as we cannot accommodate partial shifts or early/late arrivals Must be able to count and have basic math skills (addition, subtraction, multiplication, division and fractions) Don't miss out on this fantastic opportunity to join a thriving team and grow your career. Apply now and take the first step towards an exciting future with Work Now Staffing! Apply here or visit us in person: Work Now Staffing 5980 66th St N St. Petersburg, FL 33709 727-258-7380 Employees may enroll in an optional medical and supplemental benefits program through our insurance provider. This plan covers preventative and wellness services at no cost including: Annual wellness exams, Immunizations and STI screenings. Additional plan highlights include: A National Network included with over 530,000 in-network doctors; Affordable doctor visits and urgent care co-pays; Enhanced RX program featuring deeply discounted medications; Acute drug formulary with 37 medications; and, 24-7 virtual urgent care. Additional information on pricing and the benefits offered will be provided upon hire.

Looking to find a place you can grow with and love coming to work everyday? Don't let the rainy days of summer cut into your paycheck. Let us help not only give you a job but a career!! We're looking for people with positive attitudes that want more out of a life than just a job you dread showing up for every day. While experience is preferred, a positive attitude with a solid work ethic and the proper training (we provide that part) will do very well. We build our homes in our factory so weather does not affect us! We offer a $1000 sign on bonus (paid out over 6 months), hourly base rate plus monthly production bonus. We also offer great benefits (Medical, Dental, Vision, and more), Personal Time Off, Holiday Pay, no travel, Christmas Bonus, Referral Bonus and much more!! Come join our team and let's build something GREAT!!! Minimum Qualifications: Must be at least 18 years of age Must be legally authorized to work in the United States Be able to read, write, and speak English High School diploma, preferred Knowledge, Skills and Abilities: Ability to read a tape measure Possess basic construction knowledge and comfortable using basic tools Excellent attention to detail Ability to read blueprints, a plus Ability to work in a fast-paced environment and multi-task Ability to trouble shoot and problem solve in a high-volume Versatility and willingness to transfer into various departments when necessary You must be able to communicate efficiently and clearly with other Team Members Working conditions: Continuous exposure to heat, cold, noise, and some working outdoors. Must wear OSHA required PPE Physical requirements: Requires walking, standing, lifting, pushing, pulling and climbing Heavy Work-Exerting up to 50 pounds of force occasionally, and/or up to 20 pounds or force frequently, and/or up to 10 pounds of force constantly to move objects Disclaimer: “This is intended to provide general information about the position. It is not an employment contract. As with all positions, the responsibilities and duties of this position may change. The company, in its discretion, may alter this job description at any time with or without notice.” EEO/AA Statement: Cavco Industries Inc., and all of its Subsidiaries are an EEO/AA (equal opportunity/affirmative action) institution and does not discriminate on the basis of sex, age, race, color, religion, physical or mental disability, creed, national origin, veteran status, sexual orientation, genetic information, gender identity, or gender expression in the programs or activities which it operates.

Full-time Description Job Title: Labor Company: EHC Construction Job Type: Full-Time Industry: Construction / Roadwork To be considered for this role, please go to our website and apply there directly. Website: EHC Inc - Job Opportunities We look forward to hearing from you! Job Overview: EHC Construction is seeking reliable and motivated individuals to join our growing team as Labor. In this role, you will support road construction and maintenance activities while ensuring the safety and efficiency of all operations. This position requires both physical labor and willingness to learn to operate equipment. Key Responsibilities: Perform general labor tasks such as digging, shoveling, lifting, and site cleanup. Prepare construction sites by removing obstacles, compacting space, and moving materials. Safely direct traffic around construction and maintenance zones. Operate construction tools and equipment efficiently for daily tasks. Use appropriate safety gear including headgear, gloves, safety glasses, and clothing at all times. Follow all safety guidelines and health regulations during operation and on site. Ensure construction equipment and tools are cleaned, maintained, and stored correctly. Provide assistance to foremen, operators, and other team members as needed. Operate roller equipment safely and proficiently to compact soil, asphalt, and other materials. Conduct daily safety and maintenance checks on assigned equipment. Stay alert and aware of surroundings, especially when working on public roadways. Complete all assigned tasks efficiently and within project timelines. Willing to learn new tasks and equipment. Take on additional duties as assigned to support team and project goals. Requirements Qualifications: Must be at least 18 years old. Must have reliable transportation to and from job sites. Previous experience operating roller or construction equipment preferred. Ability to perform physically demanding work and lift heavy materials. Willingness to work outdoors in all types of weather. Strong work ethic with a focus on punctuality, responsibility, and safety. Why Join EHC Construction? At EHC Construction, we value hard work, teamwork, and safety. We offer opportunities for growth within a respected company, hands-on experience, and the chance to work on impactful infrastructure projects across the region. Benefits: EHC Construction offers a comprehensive benefits package to support the well-being of our employees: Competitive Pay & Bonuses Health Insurance (Medical, Dental, and Vision) 401(k) with Company Match Paid Time Off (PTO) and Paid Holidays Company-Paid Life Insurance and AD&D Coverage Short-Term Disability Insurance Opportunities for Career Advancement Visit our website for more information about EHC: ************************ Drug-free workplace. Equal Employment Opportunity/Affirmative Action. We use USCIS E-Verify for all EHC, Inc. employees.

Seeking two 1st shift aircraft assemblers with the availability to work OT on the weekends depending on business needs. Basic Qualifications : * 2-5 years of knowledge or experience in assembly, structures, sheet metal or manufacturing. * High School Diploma or GED equivalent. * Must have experience using hand tools (i.e. torque wrench, drills and inspection tools, riveting tools, and various other hand tools). * Ability to read and interpret assembly Drawings or Instructions. * Must be US citizen Desired skills : * Experience in structures assembly and/or sheet metal assembly * F-35, F-16, or C-130 specific experience Benefits provided: * 401K * Medical, dental, and vision * Sick time as applicable to state law Butler America Aerospace, LLC. is an equal opportunity employer. Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics. The Butler America Aerospace, LLC. EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices. Butler America Aerospace, LLC. is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at accommodations@butler.com.

Purpose: Perform assembly operations on a variety of medical products following written and verbal instructions. Duties and Responsibilities: Check work for proper assembly; may use microscope for checking assembly to ensure specifications are met. Set up and operate various packaging devices. Follow all clean room gowning requirements (PPE) Assemble, label, and package a variety of sterile and non-sterile products or sub-assemblies following established procedures and accurately complete all necessary paperwork. Print labels as required and complete associated paperwork. Perform preventative maintenance on tools, equipment, and machines as required. Perform other duties and special projects as assigned Work Experience Requirements: A minimum of one year work experience preferably in assembly and packaging operations. Physical Requirements Must be able to lift 20 pounds. Must be able to stand 10 hours/day. Knowledge Requirements: Ability to follow verbal and written instructions. Able to work at established production rates and demonstrate good hand/eye coordination and manual dexterity. Must be able to work all scheduled overtime. Basic English speaking/comprehension/reading-ability required This position is not eligible for employer-based visa sponsorship. Benefits: CONMED offers a wide array of benefits to fit your unique needs. Visit our Benefits Page for more information. Competitive compensation Excellent healthcare including medical, dental, vision and prescription coverage Short & long term disability plus life insurance -- cost paid fully by CONMED Retirement Savings Plan (401K) -- CONMED matches your contributions dollar for dollar, with the potential for up to 7% per pay period Employee Stock Purchase Plan -- allows stock purchases at discounted price Tuition assistance for undergraduate and graduate level courses Know someone at CONMED? Have them submit you as a referral before applying for this position to be eligible for our Employee Referral Program incentives! CONMED is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Protected veterans and individuals with disabilities are encouraged to apply. The Know Your Rights: Workplace Discrimination is Illegal Poster reaffirms this commitment. Colorado Residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information. If you feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact us at ************ option #5.

As an Associate Assembler at GE Aviation Systems LLC, you will be responsible for the assembly of aircraft components and systems following established procedures and quality standards. This role operates on the 2nd shift, contributing to the timely production of high-quality aerospace parts. Job Responsibilities * Perform assembly operations on various aircraft components and sub-assemblies according to blueprints, work instructions, and engineering specifications. * Utilize hand tools, power tools, and specialized equipment to assemble parts with precision and accuracy. * Inspect assembled components for defects, ensuring compliance with quality standards and specifications. * Complete necessary documentation, including work orders, inspection reports, and production logs. * Adhere to all safety protocols and company policies to maintain a safe working environment. * Collaborate with team members and supervisors to troubleshoot issues and optimize assembly processes. * Maintain a clean and organized work area. * Participate in continuous improvement initiatives and training programs. Job Qualifications * High School Diploma or GED equivalent. * Previous experience in manufacturing or assembly preferred, ideally in an aerospace or precision manufacturing environment. * Ability to read and interpret blueprints, schematics, and work instructions. * Strong attention to detail and manual dexterity. * Basic understanding of quality control principles. * Ability to work effectively in a team-oriented manufacturing environment. * Must be able to work the 2nd shift (typically afternoon/evening hours). * Physical ability to stand for extended periods, lift up to 30 pounds, and perform repetitive tasks. * Basic computer skills for data entry and documentation. Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No

Join Our Team - Production Tech / Assembly Tech Department: Trolling Motor Assembly ? Position Type: Full-Time, Non-Exempt Power Your Career with Power-Pole! Are you mechanically inclined, detail-oriented, and looking for a hands-on career in a fast-paced, team-driven environment? Join Power-Pole, a leader in high-performance marine technology, as a Production Tech / Assembly Tech and be part of something that moves-literally! In this role, you'll help build, test, and package some of the most advanced trolling motors and accessories in the industry. Whether you love working with your hands, solving mechanical challenges, or taking pride in craftsmanship and precision, this opportunity is perfect for you! What You'll Do: ? Assemble high-quality trolling motors - from sub-assemblies to main builds ? Test final products to ensure top-tier performance ? Build and test remotes & foot buttons for seamless operation ? Use pneumatic tools and other industry-standard equipment ? Keep your workspace clean, safe, and organized ? Work independently and as part of a team to meet production goals What We're Looking For: Self-Starter - You take initiative and make the most of your time Team Player - You give and receive feedback and contribute to a positive work environment Mechanically Inclined - You're comfortable using hand tools and working with moving parts Problem-Solver - You can follow instructions but also raise concerns and suggest solutions Detail-Oriented - You take pride in accuracy and quality workmanship Adaptable & Dependable - You show up on time, stay organized, and handle challenges with a great attitude Why Join Power-Pole? ? Career Growth - Work with industry-leading technology and expand your skills ? Team-Oriented Culture - Join a workplace that values collaboration and integrity ? Exciting Work Environment - Be part of the innovation behind cutting-edge marine products Ready to Build Something Great? Apply Today! At Power-Pole, we're more than just a workplace-we're a team that values craftsmanship, quality, and innovation. If you're looking for an exciting, hands-on role with opportunities to grow, we'd love to meet you! Apply now and start your journey with Power-Pole! Requirements Work Schedule & Environment: Monday - Friday, 7:00 AM - 4:00 PM (One-hour lunch break) Work Setting: Warehouse/production environment with moderate to loud noise levels (forklifts, tools, etc.) Physical Requirements: ? Ability to stand, walk, and work with your hands for extended periods ? Lift and move up to 50 lbs ? Work near moving mechanical parts and exposure to industrial chemicals (safety measures in place) ? Reasonable accommodations available for individuals with disabilities

GARNEY CONSTRUCTION A Laborer position is available in Sarasota, FL. This position is for a dependable person who wants to assist in daily tasks and learn the essential skills to start a career in the construction industry. This is an excellent opportunity to start your career while earning highly competitive weekly pay starting at $20 per hour, industry-leading benefits, and an opportunity for overtime work. WHAT YOU WILL BE DOING This position is focused on assisting the crew with the completion of daily tasks with the use of a variety of techniques and equipment. Examples of daily tasks: * Maintaining and operating pneumatic and electrical tools, such as concrete vibrators, compactors, concrete saws, cut-off saws, jackhammers, and hand-operated trenchers. * Lifting, carrying, and holding building materials, tools, and supplies. * Joining, wrapping, sealing, and bedding sections of underground pipe and pipe penetrations. WHAT WE ARE LOOKING FOR We are looking for hard-working individuals who enjoy being active and working on their feet throughout the day. The ideal candidate must also be able to use essential tools such as tape measurers, hammers, tool belts, and lineman pliers to perform their assigned tasks accurately. Requirements: * Must be able to work on their feet for an entire day. * Must be willing to complete OSHA 10 (provided by Garney). * Must be willing to complete "Fall Protection Certification" (provided by Garney). * Must be willing to work overtime. * Must have access to reliable transportation. * Must be willing to travel for work. LET'S TALK THE PERKS! * Starting pay of $20 per hour. * Employee Stock Ownership Plan (ESOP) & 401K Retirement Plan. * Health, Dental, Vision, and Life Insurance. * Health Savings Account (HSA) / Flexible Spending Account (FSA). * Long-term Disability, Wellness Program & Employee Assistance Plans. * Holidays and PTO CONTACT US If you are interested in this Laborer position in Sarasota, FL then please APPLY NOW. For other opportunities available at Garney Construction go to careers.garney.com. THE BENEFITS OF WORKING AT GARNEY Free medical, prescription, dental, and vision plans ($0 premiums) Virtual doctor visits with no co-pay Shares of company stock at no cost starting your first day 401(k) plan with a 3.5% match Student loan resources Weekly paychecks Paid time off 8 paid holidays Health Savings Account (HSA) with a lump sum and matching contributions Free life insurance & disability policy Free access to healthcare coordinators Counseling sessions with mental health professionals at no cost Access to consultations with legal/financial professionals at no cost Free programs assisting with weight loss, maternity health, prescriptions for chronic conditions, and more 50% employee discount in the Garney apparel store BUILDING SUSTAINABLE FUTURES WITH THE WORLD'S MOST PRECIOUS RESOURCES-WATER AND PEOPLE. EEO - it's the law poster Right to work This organization participates in E-verify Nearest Major Market: Sarasota Nearest Secondary Market: Tampa

As a leader and innovator in the snack food industry for over 50 years, J&J Snack Foods provides branded snack foods to foodservice and retail supermarket outlets across the U.S. Its products include such icons as SUPERPRETZEL, ICEE, and Dippin' Dots along with other key brands like LUIGI'S Real Italian Ice, The Funnel Cake Factory Funnel Cakes, and Hola Churros. J&J also has a strong presence in bakery providing cakes, cookies, and pies to some of the largest grocery and convenience retailers in industry. Our company continues to deliver record sales led by a talented team and a commitment to “Fun Served Here”. POSITION SUMMARY: This position is responsible for the production of frozen novelty ice cream. The Production employees are responsible for making the product and running the vitaline machines based on the schedule provided by senior management. This includes, but not limited to, standing for the entire shift the inspection of the popsicles, or cups, from a moving conveyer system, product fill, and inspect the seal on paper wraps, or lids. Must be capable of learning the product and company's requirements of final product expectation. The Line Worker must be able to inspect, and work from a fast-moving conveyer system coming from filler machine for quality. This function may require lifting up to, and including, fifty pounds (50 lbs) throughout the shift. Additionally, this position requires adherence to Housekeeping, Good Manufacturing Practices (GMP), Safety and all other Company Rules and Policies. ESSENTIAL FUNCTIONS: (Including but not limited to) inspecting the quality of the final product after filling. Adhere to all environmental, health and safety requirements and procedures. Responsible for food safety and quality. COMPETENCIES: To perform this job successfully, the Machine Operator Line Worker must be self-motivated, able to problem solve, detail-oriented, and able to stay on task. The requirements listed below are representative of the knowledge, skill, and/or ability required. Job knowledge Problem solving Teamwork Interpersonal skills/communication Product knowledge- The line worker must be able to inspect and work from a fast-moving conveyer system. Make decisions regarding the quality of final product. The employee must be able to work well with others and independently. Technical knowledge and skills- Good hand coordination; Good visual ability. EDUCATION AND EXPERIENCE: High School diploma or GED TRAVEL REQUIREMENTS: N/A Physical Activities Check all that apply Frequency (N) Never, (O) Occasionally or (C) Constantly Ascending or descending ladders, stairs, scaffolding, ramps, poles, and the like. O Moving self in different positions to accomplish tasks in various environments including tight and confined spaces. O Remaining in a stationary position, often standing, or sitting for prolonged periods. C Moving self to accomplish tasks or moving from one worksite to another. O Adjusting or moving objects up to 15 pounds in all directions. C Communicating with others to exchange information. C Repeating motions that may include the wrists, hands and/or fingers. C Operating machinery and/or power tools. O Operating motor vehicles or heavy equipment. N Environmental Conditions Check all that apply Frequency Low temperatures. C High temperatures. N Outdoor elements such as precipitation and wind. N Noisy environments. C Hazardous conditions. O Poor ventilation. N Small and/or enclosed spaces. N Physical Demands Frequency Sedentary work that primarily involves sitting/standing. C Light work that includes moving objects up to 20 pounds. C Medium work that includes moving objects up to 50 pounds. C Heavy work that includes moving objects up to 100 pounds or more. N US Hourly Pay Range $15 - $16 USD Disclaimer: This position description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the team member. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. EEO Statement: J&J Snack Foods Corp.is an equal opportunity employer and prohibits discriminatory employment actions against, and treatment of, employees and applicants for employment based on actual or perceived Federal, State and local laws that prohibit employment discrimination on the basis of race, color, age, national origin, ethnicity, alienage, religion or creed, gender, gender identity, pregnancy, marital status, sexual orientation, citizenship, genetic disposition or characteristics, disability or veteran's status, sex offenses, prior record of arrest or conviction, genetic information or predisposing genetic characteristic, status as a victim or witness of domestic violence, sex offenses or stalking and unemployment status.