Line up worker jobs in Mercer Island, WA

Nova Group Inc., a Quanta Services company, is an industry leading general engineering construction company with 45 plus years of experience worldwide. Nova specializes in hydrant fueling, waterfront, electrical and utility military construction projects for the Department of Defense (NAVFAC, USACE) and Department of Energy at various National Laboratories. Nova exceeds customer expectations through innovative construction, safety, quality and outstanding customer service. Headquartered in Napa, CA, with regional offices in Rancho Bernardo, CA, Port Orchard, WA, Japan and project locations stretching across the US, as well as internationally, the opportunities are endless with Nova! Nova offers employees competitive health benefits, matching 401K contributions, career advancement opportunities, and endless training opportunities. PRIMARY PURPOSE: Assist skilled craft workers in performing their assigned duties. TYPICAL DUTIES: * Performs a variety of tasks involving dexterous use of hands and tools. * Mops, brushes or spreads paint or bituminous compounds over services and applies caulking compound by hand or with caulking gun to seal surfaces. * Lifts, carries and holds building materials and supplies, levels earth to fine grade using pick and shovel and measures distances from grade stakes, drives stakes and stretches tight line. * Grinds, sands and polishes surfaces such as concrete or wood. * Cleans tools, equipment, materials and work area. * Adheres to all safety regulations and procedures. * Works harmoniously, cooperatively and courteously with others at all times. * Performs miscellaneous other duties and responsibilities as required. REQUIREMENTS: Worker should be able to: Follow specific instruction; perform a variety of duties that change often; repeat tasks of short duration according to set procedures; work within standard of accuracy; and evaluate information using measurable standards. Physically, worker must be able to stand and walk for long periods; use arms and hands to reach for handle and manipulate objects; lift and carry materials weighing 100 pounds; climb up and down ladders, scaffolding and other objects and carry tools and equipment; stoop, kneel, crouch, crawl, see and hear (naturally or with correction). Must posses a valid driver license Benefits * Prevailing wage rate plus fringe benefit rate. ($20.00 - $45.00 per hour base rate, $10.00 - $25.00 per hour fringe benefit). * 401k Equal Opportunity Employer, Disabled, and Veterans are encouraged to apply.We are committed to helping individuals with disabilities participate in the workforce and ensuring equal opportunity to apply and compete for jobs. If you need assistance or have a request for an accommodation of a qualified disability to apply for a job posting, please email or write us at the address below and we'll be happy to help. All others interested in applying for a job posting should do so through our career site.Nova Group, Inc. c/o Human Resources 185 Devlin Rd Napa, CA 94558 If you want to view the Know Your Rights: Workplace Discrimination is Illegal poster, please choose your language: English - Spanish - Arabic - Chinese English - Spanish - Chinese If you want to view the Pay Transparency Policy Statement, please click the link: English View Company Information To see other positions, click here.

When you work for AmeriGas, you become a part of something BIG! Founded in 1959, AmeriGas is the nation's premier propane company, serving over 1.5 million residential, commercial, industrial and motor fuel propane customers. Together, over 6,500 dedicated professionals will deliver over 1 billion gallons of propane from 1,800+ distribution points across the United States. Applications for this position will be accepted until 01/30/2026. Posting Job Summary (Purpose): The Utility Worker primarily works in the outside production area of the AmeriGas Cylinder Exchange facility. The employee is responsible for the processing of cylinders (20 lb. barbeque grill cylinders). Key Characteristics: * Models a commitment to safety through his/her own day-to-day behavior; follows company safety procedures and policies * Demonstrates high professional and personal standards; has a commitment to quality, timeliness, and continuous improvement * Ability to function effectively as a member of a production team Duties and Responsibilities: * Sort, inspect, clean, paint, label, and refill empty cylinders. * Maintain a safety focus at all times and wear the proper PPE * Ensure the consistent quality of cylinders are being processed * Load filled cylinders onto the truck(s) for the next day's shipments. * Ability to stand and walk 8 - 12 hours per day. * Ability to lift 50 pounds repeatedly throughout the day. * Perform general housekeeping duties. Knowledge, Skills and Abilities: * Ability to follow processes, procedures, and instructions * Ability to function effectively as a member of a production team * Willingness to grow and learn * Basic mechanical aptitude * Basic computer knowledge * Work in a fast-paced environment * Be able to stand 8-10 hours per day * Ability to obtain required state licensing * Ability to be forklift certified Education and Experience Required: * 1 - 2 years work experience in manufacturing is preferred * High School Diploma or GED Working conditions: * Environmental conditions such as wind, rain, ice, and snow may affect this job, as the production area where the employee spends most of the workday is not enclosed. AmeriGas Propane, Inc. is an Equal Opportunity Employer. The Company does not discriminate on the basis of race, color, sex, national origin, disability, age, gender identity, sexual orientation, veteran status, or any other legally protected class in its practices. AmeriGas is a Drug Free Workplace. Candidates must be willing to submit to a pre-employment drug screen and a criminal background check. Successful applicants shall be required to pass a pre-employment drug screen as a condition of employment, and if hired, shall be subject to substance abuse testing in accordance with AmeriGas policies. As a federal contractor that engages in safety-sensitive work, AmeriGas cannot permit employees in certain positions to use medical marijuana, even if prescribed by an authorized physician. Similarly, applicants for such positions who are actively using medical marijuana may be denied hire on that basis. The pay for this position ranges from $20.00 to $21.00, depending on circumstances including an applicant's skills and qualifications, certain degrees and certifications, prior job experience, market data, and other relevant factors. Additional compensation may include eligibility to earn a performance-based bonus or commissions on completed sales depending on position. This is the Company's good faith and reasonable estimate of the range of compensation for this position as of the time of posting. The Company offers a wide array of comprehensive benefit programs and services including medical, dental, vision, flexible spending and health savings accounts to our benefits-eligible employees. Additional benefits include retirement savings plans like 401(k) and paid days off such as parental leave, military leave, vacation/paid time off, sick leave in compliance with state law, as applicable, paid holidays, and disability coverage. Some benefits offerings are subject to any legal requirements or limitations, employee eligibility status, and where the employee lives and/or works.

Job Description Job Unit: Varies Department: Production / Carton Shop Non-Exempt Salary: Hourly Reports to: Production Supervisor Summary Description Assembles precut steel garage door sections using hand and power tools. May be required to perform functions of other jobs within the department. Essential Duties Obtain work orders and production schedule and assemble materials accordingly Install rubberized seal onto edge of sections Install end cap onto sections Stack sections including running sections through banding machine Perform quality assurance inspection Essential Job Skills and Experience Education/experience: Any combination of education providing the required skill and knowledge for successful performance would be qualifying. Typical qualifications would be: High School Diploma or GED. No Previous experience required; some transferrable experience preferred Skills/Knowledge Required: Must be able to read a tape measure accurately Able to lift 50-75lbs safely Able to stand for extended periods of time (10-12-hour days) Good hand-eye coordination Physical Environment/Working Conditions: This position is in our manufacturing plant. It will involve standing, walking and lifting for long periods of time throughout the day and requires repetitive motion of arms, shoulders, wrists and hands. The plant is not climate controlled and will require the employee to dress appropriately. Noise levels can become high so NWD provides and requires hearing protection in the department. Equipment Used: Tape Measure, Hand Tools The above information on this description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory or all duties, responsibilities, and qualifications required of employees assigned to this level. Who we are: Hörmann is a premier manufacturer of steel, aluminum and custom wood garage doors. We provide the building industry with high quality, innovative garage doors at competitive prices while maintaining a reputation of quality, reliability and integrity. We offer a team-centered environment, where each member's unique knowledge, skills, abilities, and efforts define our success as a company. Hörmann is an Equal Opportunity Employer with a diverse employment environment. Hörmann is a drug-free workplace. A pre-employment drug test must be negative regardless of whether you live, test or plan to work iin an area that permits legalized use of marijuana for either medical or recreational purposes. All offers of employment will be contingent on successfully passing a criminal background check and a pre-employment drug test. Job type: Full-time Pay: $18.50-22.52 Benefits: 401(k) 401(k) matching Dental Insurance Health Insurance Health Savings Account Life Insurance Paid time off Tuition reimbursement Vision Insurance Schedule: Day Shift Monday to Friday

Bremerton, WA Summary: Performs variety of general work on U.S. Navy shore facilities, waterborne vessels, surface ships and/or submarines. Tasks will be assigned by the Project Manager. Duties and Responsibilities include the following: Other duties may be assigned. Performs a variety of general manual labor tasks including, but not limited to, lifting and moving materials, loading and unloading vehicles, surface preparation work, and other activities in helping or assisting mode. Assists mechanic in simple repairs on machinery. Perform housekeeping efforts to maintain cleanliness of the worksite. Delivering materials as required. Perform duties as Fire Watch. Participates in special projects as required. Employees may be required to travel to work to other locations. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills: Must possess basic computer skills to enter data into different data basis. Education/Experience: High School Diploma or GED. Certificates and Licenses: Must be able to successfully pass a criminal background check and obtain and maintain a security badge for all military installations and civilian shipyards as needed. Knowledge, Skills and Other Abilities: Ability to follow written and verbal instructions. Must be able to read and understand material safety data sheets (MDS). Able to follow safety procedures. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required on a regular basis to stand, walk, sit, use hands, reach with hands and arms, climb, balance, stoop, kneel, crouch, crawl, talk and/or hear. Frequently the employee is required to carry objects that might weigh up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is working on a ship. The employee is occasionally exposed to work near moving mechanical parts or working in a confined space. The employee is regularly exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Wage Range: $18.00-$28.00 In determining compensation, various factors will be considered, including but not limited to, educational background; relevant experience, knowledge, skills, and abilities, market factors; and geographic location.

Founded in 2011 by two Bellevue locals, we have grown to become the preeminent Eastside luxury home builder today. Since Day 1, we have been driven by innovation and obsessed with setting our homes apart through their overall design and functionality. We truly get a thrill doing what we love most: building enduring homes with distinctive details. Learn more about us and see our work at: ******************** Why MN? We pride ourselves on our empowered team environment and dedication to taking care of our people. We believe in setting you up to succeed with clear career progression, learning opportunities, and ownership of your role from the get-go. Accountability is huge for us and we place a lot of trust in our employees to do the right thing. We believe that a supportive and inclusive culture yields happy people, and happy people are the most successful at what they do. About This Role Our Laborers work primarily on our jobsites to fill gaps between subcontractor trades and keep our projects moving safely, on-time and on-budget. Hours are usually 7am-4pm (M-F), 40-hours per week. Overtime is available, and some weekend work may be required. On a Given Day, Your Work Might Include Observe all safety requirements on job sites, and actively seek to correct or report safety hazards or infractions Operate a variety of tools safely, including but not limited to: skill saw, drill, nail gun Moving, securing, installing, building, and loading or unloading construction materials Assisting in the building or construction of various objects Effectively using heavy and light equipment, depending on the jobsite/assignment Moving dirt or other material as directed in plans or by the Project Manager Moving items from place to place, according to direction from the Project Manager Maintain a clean job site Perform other duties as assigned Physical Requirements Frequent physical work including lifting, digging, bending, twisting, kneeling, climbing ladders, and using hand and power tools Lifting up to 100lb on occasion Standing and/or walking for extended periods of time Ability to work outdoors in cold and hot weather Travel & Vehicle Requirements Regular travel between job sites within a 5-mile radius of Bellevue and Kirkland Valid WA State driver's license, an acceptable driving record and proof of vehicle insurance are required What You'll Need to Succeed 1-2 years' hands-on experience in residential construction. Carpentry experience strongly preferred Comfortable working with hand and power tools Experience working with and interpreting blueprints Strong work ethic, reliability and dependability Ability to work with a team or independently Basic but effective communication skills required Employee Benefits 100% covered employee premiums for medical and dental self-coverage 100% employer-paid life insurance 100 % employer-paid long term disability insurance Paid medical and family leave Critical illness insurance 401(K) with generous company match, no vesting schedule, and access to professional financial advisors 15 PTO & 9 holidays New iPhone for your personal and business use Free onsite parking Company paid events Complimentary snacks & beverages Hours & Compensation This is a full-time position paying $20.82/hr - $29.15/hr. The hourly range represents the anticipated low and high end of the hourly range for this position. Individual placement within a salary range will vary based upon factors including but not limited to candidate experience, knowledge, individual skills, and organizational performance. Don't meet every single requirement? Studies have shown that women and people of color are less likely to apply to jobs unless they meet every single qualification. At MN Custom Homes we are dedicated to building a diverse, inclusive, and authentic workplace, so if you are excited about this role but your past experience doesn't align perfectly with every qualification in the job description, we encourage you to apply anyways. You may be just the right candidate for this or other roles. MN Custom Homes is an equal opportunity employer

Job DescriptionJoin Our Team at Orca Bay Foods Orca Bay Foods has proudly operated as a trusted food processor in the Pacific Northwest for nearly 30 years. We are committed to quality, safety, and cleanliness in everything we do. If you're reliable, hardworking, and ready to be part of a fast-paced team, we invite you to apply and grow with us. We are currently hiring Production Workers to support operations at our Seattle-based processing facility. In this role, you will help produce and package high-quality seafood and food products while following established safety and sanitation procedures. This is a land-based, full-time opportunity offering steady hours and long-term growth potential. Key Responsibilities Process and package fresh and frozen food products (including shellfish) Rotate through various positions on the production line including sorting, labeling, weighing, packing, sealing, loading, and unloading Follow all food safety, sanitation, and quality procedures Maintain clean and organized work areas Perform visual inspections of products to ensure quality standards are met Follow instructions from supervisors and team leads and be flexible to shift tasks as needed Work Environment & Conditions Cold and wet production environment (temperatures as low as 40°ree;F) Fast-paced, physically demanding environment requiring prolonged standing Regular exposure to moving mechanical parts, humidity, and noise You must not have known allergies to shellfish or other seafood products Physical Requirements Stand for extended periods Regularly lift and move 25-50 lbs; occasionally up to 75 lbs Frequent use of hands and arms; occasional walking and stair climbing Schedule & Availability Available Shifts: 1st Shift: 4:00 AM - 4:00 PM 2nd Shift: 3:00 PM - 3:00 AM Extended hours and weekend work (including Saturday and Sunday) may be required during peak production periods Must be dependable and able to meet all attendance requirements What We Offer Full-time, year-round employment Stable 40+ hour workweeks during both peak and non-peak seasons Benefits eligibility after 60 days of employment Opportunities for growth and advancement within the company • Ability to follow verbal and written instructions • Must be able to work weekends and overtime as needed • Ability to lift or move 25-50 lbs. and occasionally lift 50-75 lbs. • Able to work at a fast pace in a cold & wet work environment • Perform other duties or production positions as assigned by supervisors/leads Benefits: The typical hourly pay range for this role is $21.00 - $23.00 per hour. Individual base pay depends on various factors such as complexity and responsibility of role, job duties/requirements, and relevant experience and skills. Starting Pay: $21.00 per hour This position offers the following benefits: 100% Employer Paid Medical and Dental 401(k) Profit Sharing Plan Paid Time Off (accrue up to 10 days annually at hire) 9 Paid Holidays Group Life Insurance Long Term Disability Employee Assistance Program Flexible Spending Account Pre-Tax Commuter Benefit Voluntary Benefits (vision, disability, life insurance) Free Parking

Digital Control Incorporated (DCI) is the world's leading supplier of underground locating and steering products for the horizontal directional drilling (HDD) industry. Since the introduction of this revolutionary technology 30 years ago, Digital Control has been at the forefront of trenchless technologies that enable the efficient installation of underground utilities such as fiber optic, telecom, gas, and water lines world-wide. DCI's products are valued for their durable design, ease of use and uncompromising commitment to customer service. We are seeking a Manufacturing Assembly Technician based out of our headquarters in Kent, WA to help ensure our products continue to live up to DCI's high standards and exceed the expectations of our global customers. You will apply your assembly skill and knowledge of electronic devices to produce complex electromechanical products in a high-mix environment. If you are hands-on and passionate about technology, collaboration, and continuous improvement, then DCI could be a perfect fit for you! Requirements What You'll Do: Consistently perform assembly and initial testing of new products and/or sub-assemblies as quickly as possible while maintaining exemplary quality standards Assemble and test per established methods, schematics, and procedures Effectively communicate product and departmental issues between assembly personnel, department leads, manufacturing management and other interested parties Communicate with other technicians regarding methods and best practices Communicate with production planning personnel regarding work in process, answer questions and explain problems, solutions and expected completion times Proactively communicate with other individuals and departments on assembly related issues Work with all tools necessary for any potential job and possess a high level of expertise on various electronic and mechanical systems Be familiar with a variety of the field's concepts, practices, and procedures Perform a variety of complicated tasks with limited supervision and oversight Assemble electronic and electro/mechanical equipment, including soldering experience and programming electronic devices Perform work requiring a thorough knowledge of electrical, electronic and mechanical principles Proficiently use a personal computer to perform job tasks, including Microsoft Windows and Office Suite Inform appropriate management and technicians of potential product problems and suggests corrective actions Rely on experience and judgment to plan and accomplish goals Maintain company-required performance and maintenance records for identified equipment Report product and process improvement suggestions to manufacturing engineering Ensure yourself and everyone that works in or visits the Assembly Shop follows appropriate personal safety and ESD prevention protocols Work independently as well as with a team Possess a high sense of integrity and confidentiality, will be required to maintain confidential product and trade secrets information Who you are: Two-year technical degree or accredited apprenticeship program or equivalent additional experience in a technical field Three years of proven experience in the electronics and/or electro/mechanical fields Experience and ability to work in a fast-paced manufacturing environment Ability to read and understand technical drawings Effective written/ oral communication Ability to change direction and handle multiple responsibilities and tasks on a regular basis A thorough knowledge of electrical/electronic components and equipment, including the use of special instruments for diagnostic purposes is preferred Hands-on aptitude, self-directed and able to work independently Lean Six Sigma and continuous improvement experience preferred Equipment maintenance experience preferred PCB programming experience preferred Benefits Unparalleled health benefits (PPO plan with no deductibles, no co-pays, DCI covers 99% of costs) Quarterly bonuses: we all share in the success of the company Professional development 401k match (3% match from DCI regardless of participation, 5% maximum match, 100% vested immediately) 22 days PTO Parental leave Company covers 100% of payroll taxes for state family medical leave 11 annual paid holidays plus 1 floating holiday Winter break (we are closed the last week of each year) See more benefits information here. Compensation: DCI is proud to offer comprehensive compensation packages including competitive base pay and discretionary quarterly profit sharing bonuses to all part-time and full-time team members. Base pay is reviewed at a minimum on an annual basis. Pay range: $50,600 - $55,800 per year. To ensure equity, our compensation philosophy is to bring people into new roles in the range of the mid-point of that role. Factors considered for pay include the level of skill, experience, training, external market factors, and internal value. Profit sharing bonus: Over the last 3 years, quarterly bonuses ranged between 11% and 16%. Future bonuses could be higher or lower depending on company profits. Why DCI? Work hard, play often... DCI employees are innovative and creative. Our open (forest-like) work environment creates free flowing conversations across all functions. We have gaming days; Lego challenges and ping pong matches to build on our creativity when one hits a roadblock. If that is not enough, our employees bring their four-legged companions (dogs) to work and can take them for a walk around the Green River trail. DCI takes pride in caring a lot about our employees. We believe that employees should not be burdened with benefits expenses, so we provide lucrative health care plans unmatched in most other companies. We also like to eat at DCI and find any excuse to celebrate the most random holidays (Pi Day, Chocolate Ice Cream Day, etc.) We have monthly catered lunches, a fully stocked snack area, sporting tickets, wellness competitions, and most importantly a team of people who will tell you that DCI is the best place they've ever worked. This is evident by our long service team and low turnover. We Celebrate Inclusion: DCI is an equal opportunity employer. Employment at DCI is based solely on a person's merit and qualifications directly related to professional competence. DCI does not discriminate against any employee or applicant because of race, creed, color, religion, gender, sexual orientation, gender identity/expression, national origin, disability, age, genetic information, veteran status, marital status, pregnancy or related condition (including breastfeeding), or any other basis protected by law. It is DCI's policy to comply with all applicable national, state and local laws pertaining to nondiscrimination and equal opportunity. The Company's EEO policy includes the full & complete support of the Company and all levels of leadership. Because it's just the right thing to do. We hope you think so too.

Laborers must be able to lift and carry debris safely up to 50lbs. Mixing materials and staging materials will also be a requirement. Must be willing to be trained to operate various types of equipment. Laborers will also need to have a basic understanding of productivity and production goals. They will be expected to set goals on a daily or even hourly basis related to the requirements of the estimate and the project. The purpose of this position is to ensure the efficiency of a project through planned and thoughtful movement of materials and debris. Tasks and responsibilities include: Material staging and placement Material delivery and logistical planning Tools inventory Tools and gang box staging Debris removal Tools repair and maintenance Mix plaster and fireproofing materials Communicate with lead man or foreman Operate fireproofing pumps and mixers Benefits and compensation set per union agreement. NOTE: In the Seattle area wages range from $ 30.00 per hour for entry level apprentices to $53.00 per hour for Journeyman. Wages are determined by union scale as determined in the current collective bargaining agreement. Benefits are offered through the union and may include health insurance, pension, vacation, etc. Anning-Johnson Co is a Equal Employment Opportunity (EEO) employer. It is the policy of the Company to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disability status, genetic information, or any other characteristic protected by applicable law.

**$500 Hiring Bonus! ** Applicants will receive $250 after their first 30 days, and an additional $250 upon reaching 90 days of employment. We are now offering an attendance bonus starting November 1st. 1st month perfect attendance- $50, 2nd month $100, and 3rd month $150. Pay Rate: $16.66 hourly, reviewed after 90 days and annually 1st shift schedule is 6:00 AM to 2:30 PM M-F (Our Kitchen staff starts at 5:30 in some cases) Green Revolution is a leading legal cannabis products manufacturer and distributor in Washington State. We pride ourselves on delivering the highest quality, most consistent, and diverse portfolio of cannabis goods. Our commitment to sustainability and socially responsible practices is evident in every aspect of our business. Our products are gluten-free, Kosher, and at the FDA level of food production with safety, quality, and customer service as a critical aspect. As a 1st Shift Production Operator, you will be responsible for assisting with the production of a variety of cannabis products (Beverages, Edibles, Tinctures, etc.). You will work as part of a team to create products that meet our high standards for quality and consistency. Experience in the food and beverage industry is a plus! Cannabis knowledge is not required, and we provide ample training to make you as successful as possible. This is a fast-paced role that requires attention to detail, the ability to follow strict procedures, and a commitment to safety. If you are passionate about your work and want to be part of a dynamic team, we encourage you to apply. Responsibilities Assist with the production of cannabis products, including preparing, packaging, and labeling Maintain accurate records of all production activities Ensure that all products meet our high standards for quality and consistency Follow strict procedures to ensure compliance with local, state, and federal regulations Participate in regular training to stay up-to-date on industry developments and best practices Maintain a clean and organized work environment to uphold our commitment to safety and quality Assist with inventory management and restocking of production materials Requirements Requirements Applicants should have a positive attitude with a growth mindset. We are a close-knit team that is expanding rapidly. Opportunity for growth is absolute. Be able to physically work fast, on one's feet doing repetitive tasks for long periods of time. Be able to lift 35-50 pounds -Mechanical or technical aptitude is a big plus. Experience being part of a constantly growing team. Must obtain a WA food handler's card within 10 days of beginning work. Multiple tasks done outside of baking and beverage production will be a requirement. Previous experience in a packaging or production environment is a plus. Experience designing and changing processes and procedures to increase quality and productivity is preferred. Experience with multiple pieces of equipment in the packaging, food, or beverage industry strongly preferred, but will consider technical aptitude in lieu of experience. Experience with mixing using established recipes is preferred, but will train the right applicant. Knowledge of scales and adjusting recipes based on production needs is preferred, but not required. Employees must have WA state identification on their person available for inspection at all times by compliance entities Must be 21 years of age or older EEO Statement Green Revolution is an equal opportunity employer and administers all personnel practices without regard to race, color, religious creed, sex, gender, age, ancestry, national origin, mental or physical disability or medical condition, sexual orientation, gender identity or expression, marital status, military or veteran status, genetic information, or any other category protected under federal, state, or local law. Benefits Benefits: Discounted cannabis products at nearly all Washington Retail stores. FREE Employee Assistance Program (EAP) 401(k) Retirement Plan Medical insurance Dental insurance Vision insurance Sixty hours paid vacation after the first year of employment. Paid sick leave. Unpaid Time off may be available upon request. Job Type: Full-time M-F

Job DescriptionSalary: $20.02 per hour Line Supplier- MIX Room AM Shift 05:00am- 01:30pm Schedule and Pay: $20.02 per Hour Monday- Friday with possible additional hours and weekend shifts Duties: Check the schedule and discuss with Line Leads and supervisors what product needs to be delivered to the lines Check and fill out paperwork Move racks from the coolers to the lines accordingly with schedule and FIFO Arrange the racks in the coolers sorting by batch/number Supply the lines with packaging materials accordingly Move out pallets with finished goods Qualifications: Extremely reliable attendance Passion for accuracy Able to move constantly and quickly for an entire 8 hour shift Responsible about getting work done independently Can handle working in hot and cold environments What you will bring: Prior food manufacturing experience preferred but not required Ability to work with your hands extensively and stand on your feet for 8 hours Ability to bend, reach and lift repeatedly (up to 50lbs) Drive to continuously improve performance, efficiency, and speed Basic English proficiency for reading, writing and communicating What we have to offer you: 401K with company match (available after 6 months) Health Insurance - medical, dental, vision Flexible Spending Account Childcare, Transit and Medical available Company Paid Life Insurance Supplemental Life Insurance available Paid Time Off after 90 days Who we are: A High Growth, Entrepreneurial Plant-Based Protein Company Established in 2018, Greenleaf Foods is a leading consumer plant-based protein company committed to shaping the future of plant-based eating. Our portfolio of plant-based protein brands includes Lightlife Foods and Field Roast Grain Meat Co. Lightlife products inspire clean, nourishing health with a simple ingredient deck and great taste the entire family will enjoy. Lightlife is proud to make the countrys #1 brand of tempeh the #1 plant-based hot dog. Field Roast is known for bringing food enthusiasts together with globally inspired flavors, whole-food ingredients and innovative processes that make its plant-based meats and cheeses. Together, the brands feature more than 50 products and represent a leading market position in the plant-based protein category. Greenleaf Foods is anequal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Covid-19 Vaccination: Greenleaf Foods is committed to ensuring the health and safety of all our employees. As part of this commitment, we have adopted a number of COVID-19 safety measures, including a requirement for all employees to be fully vaccinated by March 31, 2022and to show proof of vaccination. In keeping with this policy, successful candidates will need to provide proof of vaccination by March 31, 2022 (or prior to their first day of work if the start date is after March 31, 2022). We will of course consider accommodations for anyone unable to be vaccinated following workplace anti-discrimination and other applicable laws.

Join Global, a 1st Flagship Company in Bremerton, WA, as a Full-Time Laborer and embark on an exciting career where teamwork, safety and respect are at the core of everything we do. This position offers the opportunity for professional development and growth, perfect for former navy personnel, recent graduates, and construction workers looking to expand their skills. Working onsite, you will experience a fun and energetic company culture that values safety and individual accountability. With a competitive pay rate of $20.00 - $21.39 per hour, you'll be part of a team dedicated to integrity and commitment to excellence. Take the next step in your career with us! You will be given great benefits such as Medical, Dental, Vision, 401(k), Life Insurance, Health Savings Account, Flexible Spending Account, and Paid Time Off. Global A 1st Flagship COMPANY: Our Story Since 1964, Global - A 1st Flagship Company, has been on a mission to provide top-quality, innovative services for our customers. Global focuses on going above and beyond to meet and exceed customer expectations and provide a positive and safe working environment. Global is a woman-owned business with the ability to provide prime services at the lowest cost. Day to day as a Laborer Join our team at Global, as a Full-Time Laborer where your days will be filled with a variety of tasks from tying up vessels to cleaning piers and vessel decks. You will have the opportunity to prepare surfaces for preservation and apply sealing compounds with precision. Additionally, you'll assist Mechanical and Electrical trades, showcasing your commitment to teamwork. This role will require occasional work at extreme heights and the ability to lift weights of up to 40 pounds, all while ensuring safety and respect are at the forefront of every task. If you are looking for a dynamic role where no two days are the same, apply now and be part of our fun and energetic team dedicated to integrity and growth. Are you a good fit for this Laborer job? Individuals who possess at least one year of General Labor experience and are comfortable using basic hand tools are prioritized (Shipyard or Navy experience is a big plus!). However, the ability to follow both written and verbal instructions accurately is crucial for success in this position and training can be provided for candidates who exemplify Global's core values of Commitment, Integrity, Growth, Individual Accountability, Respect, and Safety. Join us! If you feel that this job is what you're looking for, apply today! We look forward to reviewing your application! As a federal contractor all employment offers are contingent on passing a pre-employment background check and drug screen.

Looking for your next big role in restoration? Step into a hands-on opportunity where your experience matters, your hard work is rewarded, and overtime is part of the deal. Now Hiring: Tech II or Lead Tech - Restoration Services Are you an experienced restoration tech ready to take your career to the next level? Do you thrive in high-energy environments and want the chance to rack up solid pay and OT? We're partnering with a respected restoration company in Kent, WA to hire motivated, skilled individuals for long-term roles in the field. Job Overview - Restoration Tech II / Lead Tech: Support and lead water, fire, and environmental damage restoration projects Operate restoration tools and equipment safely and efficiently Ensure safety and quality standards are followed on job sites Job Details: Pay: $23.00 - $25.00/hour to start Schedule: Full-time Overtime: 20-40 hours/week OT potential (expected) Location: Kent, WA What's in It for You? Medical, dental, and vision insurance Life insurance and 401(k) with company match Paid time off & holidays Growth opportunities and skill development A team that values hard work and integrity What We're Looking For: Industry experience in restoration (Required) Ability to lift 50-75 lbs and perform physical tasks for extended periods Comfortable working in fast-paced, high-pressure environments Ability to pass a drug screening (some background restrictions may apply) Our Mission: "We positively impact people and our community by placing motivated, qualified individuals at great places to work." To apply: Email: ************************************* Call: ************** Office Hours: Monday - Friday | 8:00 AM - 5:00 PM We are an equal opportunity employer, dedicated to a policy of nondiscrimination in employment on any basis including race, creed, color, religion, gender, sexual orientation, national origin, veteran status, age, disability, and any other status protected by law. American Workforce Group "Built on Relationships, Backed by Integrity" #IND4

West Sound Workforce is assisting Metagenics, a leading health and wellness manufacturer, now hiring entry-level Production Associates at their Gig Harbor facility. For more than 30 years, Metagenics has produced science-based vitamins and supplements trusted by healthcare professionals worldwide. As a Production Associate, you'll have the chance to work in a variety of areas, measuring raw ingredients, operating equipment, or labeling and packaging finished products. The work is hands-on and detail-oriented, so success comes from having solid basic math skills, mechanical aptitude, and a focus on consistency and accuracy. If you like problem-solving, staying busy, and being part of a fast-paced team, this could be a great fit. Metagenics offers more than just a job; their Gig Harbor campus includes amenities like woodland walking trails and a fitness center, and they are committed to creating a supportive workplace where employees can grow and feel valued. Shift information: Full time, Monday-Friday Day and swing shifts Available positions: Solid Dose Packagers and Fillers: $18-$19/hr Loads and unloads machines, cleans equipment, completes paperwork as required Manufacturing Packagers: $18-$19/hr Operate packaging equipment, label containers and products, and maintain equipment cleanliness Weighers: $19-$20/hr Sort and measure ingredients, pour and add them to scales, record weights, label containers, and maintain production logs Blenders: $20-$21/hr Sort, pour, and screen ingredients, add them to scales and blenders, label containers, complete production logs, and clean equipment What we are looking for: Previous experience in production or manufacturing is a plus Comfort with, or experience operating, machinery Strong communication skills Basic math proficiency Ability to follow written and verbal instructions Physical stamina to meet the demands of the role Benefits offered upon permanent hire: Medical, dental, and vision coverage Annual Health Savings Account contribution (for eligible employees Life and disability insurance Free mental health resources Vacation and sick time Two paid volunteer days per year 11 paid holidays Employee product discounts

Job Type: Full time Shift Schedule: M-Th, 3p -1:30a Salary: potential to earn up to $20 - $22/hour ** Pre-employment background check and drug screen required Production Worker / Shavings Baler Operator Lignetics is developing a portfolio of consumer brands in several different categories including wood pellets for home heating, BBQ pellets for grilling, wood pellets and shavings for animal bedding, and a wood fiber-based cat litter. Each of our products have unique features and benefits but are all linked with a wonderful recycled, renewable, sustainable, and carbon neutral story. We turn recycled saw dust into value-add, branded consumer products. Production Worker / Shavings Baler Operator Responsibilities: Assist and operate various packaging equipment Work in close proximity of machines that compress wood by-products generated from mill operations or like manufacturing processes Open compression chamber doors, facilitates placement of bags and removal of bales from packaging equipment Record bales weights and keep records of daily activity per company standards Perform routine maintenance on packaging equipment Requires ability to learn and preform standard setups, adjustments, routine maintenance and operating characteristics of all packaging equipment Forklift certified or able to obtain forklift certification to perform basic forklift duties time to time required by the company Ability to troubleshoot and solve problems Production Worker / Shavings Baler Operator Qualifications/Education: High School diploma or GED preferred Manufacturing and production line experience preferred Must possess good eye, hand and foot coordination Will need to concentrate for extended periods of time and multi-task Will be lifting 50 lbs. and standing for a minimum of 7 hours per day Requires mechanical aptitude and troubleshooting skills Requires the ability to do simple math calculations Production Worker / Shavings Baler Operator Benefits: Employee referral bonus program 2 weeks paid time off + 2 floating holidays Medical, Dental, and Vision Insurance (FSA & HSA options) Educational assistance Life insurance, short term & long-term disability 401(k) with employer match & immediate vesting Employee heating pellet program Lignetics SWAG gear to include an annual pair of work boots & other PPE Lignetics believes that all persons are entitled to equal employment opportunity (EEO) and does not discriminate against its employees or applicants because of race, color, religion, sex, sexual orientation, pregnancy, national origin, ancestry, age, marital status, disability, genetic information, or on any other protected status under state, local or federal law. Equal employment opportunity is extended to all persons in all aspects of the employer-employee relationship, including, but not limited to, recruitment, hiring, training, promotion, transfer, discipline, layoff, recall and termination. Salary Description $20-22/hour

• Cleaning and preparing work sites. • Loading and unloading materials and equipment • Building and taking down scaffolding and temporary structures • Operating and tending machinery and heavy equipment • Following instructions from supervisors and implementing construction plans • Assisting skilled tradespeople in their duties

Job Description The Gig: Production of alternate meats. The People: In a fast paced environment. Start up company with lots of potential for longevity and a possibility for a career. The Pay: $18/hour. (subject to change) The Must Haves: Ability to be on your feet for at least 8 hours a day. Lift repeatedly up to 50 lbs. If you have food allergies please disclose them so we can make sure that product isn't used in these alternative meats. Must pass a background check. For more information about this job, contact our HireQuest NW office in Bellingham, Washington at ************ or email *****************************

Our vision is that every person has the opportunity to learn, work, and thrive in all aspects of life. To achieve our vision, we are committed to dismantling racism and advancing equity, diversity, and inclusion so we can help people reach their fullest potential through our education, job placement, and career pathway services. We do our work with great gratitude for the community donations, purchases, and partnerships that make our mission possible. ***For immediate consideration, please complete our Goodwill Application.*** Weekends Required! Must have open availability! Right now our Lacey, WA store is seeking a Part Time Production Worker! Hourly Rate: $16.66 per hour + 15% discount on all donated and new goods! Position Summary: Production Workers are responsible for processing donated merchandise for re-sale including sorting, and pricing in a warehouse environment. This is a career advancing position. Giving great experience and development skills to pursue advancement. Essential Duties and Responsibilities: The Production Worker responsibilities include the following and other duties as assigned: Tickets items for sale by attaching price ticket to item Records and keeps daily production records Places ticketed items on or in appropriate transport container Monitors and reports supply needs to supervisor Ensures the area stays clean, well-organized and safe Other duties may be assigned Able to work and maintain in a fast pace environment Willingness to cross train in other areas Product Quality Assurance Inspect, clean, and repair items to be priced and placed on the sales floor. Flexibility Ability to change priorities as business dictates. Product Handling and Sorting Unloads sacks, boxes, and miscellaneous donated items from gay lords or donation carts and transports them to proper processing or storage areas.

Reports to: Department Lead Type: Full-Time Schedule: 2nd Shift (Monday - Friday; 1:15pm - 9:45pm) Responsibilities: Process parts in tanks according to specifications, work order and other requirements Calculates the appropriate amount of time needed to process parts Removes parts from tank after specified time, rinses parts and immerse them in bath before finishing processing Completes paperwork as required by company and processing guidelines Oversee and assist all line assistants to optimize throughput Evaluate and log all preventative maintenance on processing line Ensure all hazardous waste material is disposed of correctly Will receive training in racking and unracking before transitioning to full line responsibilities Demonstrates strong attention to detail and accuracy, and basic math skills Must be comfortable with exposure to chemical odors within compliance Other duties as assigned POSITION QUALIFICATIONS Competency Statement(s) Accountability - Ability to accept responsibility and account for his/her actions. Accuracy - Ability to perform work accurately and thoroughly. Applied Learning - Ability to participate in needed learning activities in a way that makes the most of the learning experience. Communication, Oral - Ability to communicate effectively with others using the spoken word. Decision Making - Ability to make critical decisions while following company procedures. Detail Oriented - Ability to pay attention to the minute details of a project or task. Ethical - Ability to demonstrate conduct conforming to a set of values and accepted standards. Honesty / Integrity - Ability to be truthful and be seen as credible in the workplace. Initiative - Ability to make decisions or take actions to solve a problem or reach a goal. Judgment - The ability to formulate a sound decision using the available information. Organized - Possessing the trait of being organized or following a systematic method of performing a task. Problem Solving - Ability to find a solution for or to deal proactively with work-related problems. Safety Awareness - Ability to identify and correct conditions that affect employee safety. Working Under Pressure - Ability to complete assigned tasks under stressful situations. Time Management - Ability to utilize the available time to organize and complete work within given deadlines. Experience - Prior warehouse or manufacturing experience is a plus but not required. Requirements: Education: High School Graduate or General Education Degree (Required) Experience- Relevant Experience Preferred Benefits: Compensation Range: $20.74 to $23.00 per hours (DOE) + shift differential for 2nd and 3rd shift Medical, Dental, Vision, Employer Paid Basic Life, Supplemental Life Insurance, 401k with a 3% Employer Match Generous Paid Time Off Program 8 Holidays and 2 Floater Holiday On-the-job training, no experience required Join a great company with opportunities for growth! Work Environment: Temperatures in the work environment can fluctuate with outside weather conditions. Due to the manufacturing environment, Personal Protection Equipment may be required including safety glasses, goggles, aprons, rubber boots, gloves, and a respirator (provided by Company).

Atwork Kent is hiring reliable Production Workers for immediate openings across South King County. These are full-time positions with opportunities to grow and gain hands-on experience. Job Details: Job Title: Production Worker Pay: $17 $19 per hour (based on experience and shift) Schedule: Full-time; multiple shifts available Work Locations: Kent, West Seattle, SeaTac, North Tukwila, and nearby areas Responsibilities: Operate production machines and equipment Assemble, inspect, or package products Maintain a clean and safe work environment Follow all safety rules and procedures Lift and move materials (up to 50 lbs) Requirements: Must be able to stand for extended periods Able to perform repetitive tasks Dependable and punctual Must be eligible to work in the U.S. Benefits of Working with AtWork: Weekly pay Temp-to-hire opportunities Supportive and responsive staffing team How to Apply: Call our Kent office at ************** AtWork is an Equal Opportunity Employer.