Logistics operator jobs in North Little Rock, AR - 94 jobs

(Eligible for our Referral Bonus Program - Please be sure to indicate the NEW Cooperative employee on your application) Essential Duties & Responsibilities: Include but are not limited to the following: Operations * Apply pre and post emerge crop protection products, dry and liquid fertilizer, and lime. * Operate fertilizer tender trucks. * Fill and transport NH3 equipment. * Assist in loading and unloading of products from vehicles based on work orders. * Operate forklift/loader to move seed, chemical, fertilizer, etc. * Utilize the automated Kahler system when processing bulk agronomy products. * Assist in other areas of the location as needed. Maintenance * Perform standard routine maintenance and repairs to equipment throughout all areas of the location. * Ensures that work area, equipment, and vehicles are all neat, clean, and well maintained. * Assist in setup and maintenance of equipment. Other * Uses all tools, equipment, and vehicles carefully and for their intended use. * Works extended hours as requested by supervisor to ensure good customer service in busy season. Basic Employment Expectations: Safety * Performs work safely and uses the appropriate PPE. * Checks the work area for hazards and corrects/reports unsafe conditions. * Considers the safety of oneself, and other employees, and customers. * Follows all safety protocols and seeks advice from supervisor when uncertain. Communication * Maintains open communication and cooperates with supervisors, departments, and fellow employees. * Communicates with supervisor and others immediately when unexpected problems cause absence, lateness, or the need to leave early. Accountability & Professionalism * Abides by policies set forth in the employee policy manual. * Carries a fair share of the workload. * Promotes NEW Cooperative through positive, friendly, and professional interactions. * Is punctual, follows directives, and works in an efficient and timely manner; accepts personal responsibility for the quality and timeliness of the work. * Understands that satisfactory attendance is essential to the efficient operations of the work environment. Customer Service * Continually works to satisfy customers to address questions/concerns through effective communication, solving problems, responding to questions, and managing their expectations. Personal/Professional Development * Establishes personal performance goals and works toward these goals. * Continually upgrades and demonstrates knowledge of the job. Qualifications & Requirements: * Must be licensed and insurable to drive. * Must have or the ability to obtain a Class A CDL (Commercial Driver's License) with tanker and HazMat endorsement. * Must have or be able to obtain a Commercial Applicators License. * Must be able to pass a D.O.T. physical every 2 years at a minimum as required by law. * High school diploma or GED with 1-3 months of related experience. * Understand the importance of providing very high levels of customer service. * Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. * Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. * Understand the seasonality of the farm supply business and the in-season time commitment. * Must be able to interact and effectively communicate with customers and individuals at all levels of the organization. * Possesses problem solving capability and understands the operational processes. Physical Demands: * The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * While performing the duties of this job, the employee is regularly required to sit, stand, walk, use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; and talk or hear. The employee is rarely required to stoop, kneel, crouch, or crawl. * The employee must occasionally lift and/or move up to 50 pounds. Abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Work Environment: * The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Position will rarely work in wet or humid, extreme cold/heat (all non-weather) conditions, work in high, precarious places, work in fumes or airborne particles, risk of electrical shock, work in explosive atmosphere, and vibration. * Position will occasionally work near moving mechanical parts and toxic or caustic chemicals. * Position will frequently work in outdoor weather conditions. Disclaimer: This job description indicates the general nature and minimum level of work expected. It is not designed to cover every activity, duty, or responsibility required of the employee. The employee may be asked to perform other duties related to the successful performance of the job.

The Forklift Operator of Watco Logistics Retail Services is responsible for safely operating warehouse equipment while ensuring the safe handling of warehouse inventory. ESSENTIAL DUTIES AND RESPONSIBILITIES INCLUDING THE FOLLOWING (OTHER DUTIES MAY BE ASSIGNED) Perform transportation, distribution & maintenance operations Efficiently conduct picking and put away procedure with high level accuracy Adhere to all Warehouse safety policies & procedures Adhere to all warehousing, handling, and shipping legislation requirements Maintain standards of health and safety, hygiene, and security Ability to accept and productively react to fast-changing work environment QUALIFICATIONS/SKILLS & ABILITIES To perform this job successfully, an individual must be able to perform each essential duty. The requirements listed below are representative of the knowledge, skill, and/or ability required: Proven work experience in warehousing and/or in the distribution industry High level of attention to detail Team player with decision making and problem-solving skills Verbal and written communication skills Thorough understanding of applicable federal, state, local, and company safety policies Thorough understanding of WMS (Warehouse Management System) High school/GED completion preferred Transportation or related experience preferred Forklift operation certification preferred Workplace safety certification preferred WORK ENVIRONMENT Work is performed primarily in a warehouse environment with frequent interruptions and regular high noise level. The work environment characteristics described here are representative of those a team member encounters while performing the essential functions of this job. PHYSICAL REQUIREMENTS & PHYSICAL DEMANDS Must be able to lift up to 50 pounds at a time Must be able to adapt and work in warm and cold temperature environment Must be able to traverse and access all areas of the warehouse

This role accelerates business value by having primary responsibility of this position is moving completed pallets from the lines. The pallets must be shrink wrapped and placed to be stacked or loaded onto trucks. Additional purpose could also entail moving completed pallets from the staging area and triple stacking them in the freezers. Demonstrates our “True North” attributes: voice of the customer, respect for the individual, no nonsense communication and utilization of facts, servant leadership and has a continuous improvement mindset in every facet of leadership and daily interaction. Leads, collaborates and demonstrates the lean principles and utilizes the lean methodologies and tools to facilitate continuous process improvements and value creation for our customers, employees and shareholders. Actively utilizes lean tools (VSM, Kaizen, A3, etc.) to inform and assess business opportunities to drive continuous improvement. Lead and participate in Kaizen and value stream mapping activities. DUTIES AND RESPONSIBILITIES: 1. Must be able to move pallets from the line with a forklift and place them to be shrink wrapped. 2. Must be able to operate the shrink wrap machine. 3. Must be able to load and unload trucks and trailers using proper documentation. 4. Must operate the forklift in a safe and responsible manner as to not jeopardize equipment or employees. 5. Must be able to perform an accurate inventory count in all freezers. 6. Must be able to retrieve triple stacked product safely and load trucks efficiently. 7. Must ensure there are a limited number of short pallets in the freezer. 8. Make and assume other duties and responsibilities required or assigned by management. 9. Adhering to the Code of Business Ethics is essential. We value honesty and integrity above all else and we expect our employees to be committed to the highest ethical standards. 10. Maintain high safety standards. Safety is personal for us all. ESSENTIAL MENTAL FUNCTIONS AND SKILLS Ability to read and interpret documents in English, such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to work in a constant state of alertness and safe manner Ability to work in an unfatigued state Ability to accurately gauge lengths of time and distance Ability to quickly store and recall instructions in one's short term memory Ability to concentrate and perform tasks involving high levels of cognitive function and judgment Ability to cope with sudden changes in surrounding and/or emergency situations and/or alarms Demonstrate a caring, committed and concerned attitude about safety Possess fast reflexes and unimpaired coordination and ability to rapidly respond to stimuli Not mentally or physically impaired from any cause that can adversely affect ability to safely and competently perform required functions Ability to take prompt and appropriate response to operating conditions CONTACTS: Internal: P&V Supervisor, P&V Maintenance Personnel, Delivery Supervisor and Drivers External: Dock customers OPERATING RESPONSIBILITIES: Work must be performed safely to avoid injuries and property damages. Work must be done in such a manner to maintain product flow in the production room while stacking ice and loading trucks. SUPERVISORY RESPONSIBILITY: No supervisory responsibility EDUCATION AND EXPERIENCE: Must have high school diploma or GED with the ability to count product and completed simple paperwork. Must be certified as a forklift operator. WORKING CONDITIONS/PHYSICAL REQUIREMENTS: Must be able to lift and stack product up to 45lbs in 12 hour shifts. Must be able to work in room temperatures of 45-60 degrees and in the freezers at 15 degrees. RESPONSIBILITY FOR PROPERTY, FUNDS, AND INFORMATION: Accountable for freezer cleanliness, product and forklift. While performing the duties of this job, the employee is regularly required to sit and talk or hear. The employee frequently is required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to stand and walk. Specific vision abilities required by this job include close vision, color vision, depth perception, and ability to adjust focus. Location Pine Bluff City: Pine Bluff State: Arkansas

Essential Functions: * Ability to multi task keeping job production flowing throughout the store and production area at all times. * Insure work area is a safe environment at all times. * Ability to carry out verbal / written material tasks under minimum supervision. * Perform daily inspections on loader. * Staging vehicles, which includes, transporting the vehicles to and from the staging area. * Transport vehicles to and from the drain shop. * Check fluids twice daily to ensure proper operation. * Use forklift or skit steer while observing all safety regulations. * Assists in a complete safe production/store environment for employees and customers. * Ensures an environmentally safe environment. * All other duties as assigned. Marginal Functions: * Knowledge and experience in the Auto Dismantling Industry. * Prior experience in operating a Loader or similar equipment A +. Physical Activities Required to Perform Essential Functions: * Sitting, walking, bending, stretching are required regularly to perform job function, production, and environmental/safety responsibility functions. * Able to sit for 6-8 hours per day in two hour intervals. * Manual dexterity to handle tools and the ability to move 50 pounds are regularly required to perform routine functions. * Vision must be sufficient to perform job functions as described above. * Good eye hand coordination and good motor skills. Job Conditions: * Exposure on a regular basis to outdoor weather conditions. * Periodic exposure to minimal chemical hazards. Qualifications: * Must attend retraining classes annually that meet company standards and expectations. * Must successfully complete the Chemical Hazards Training program. * Able to read, understand, and follow written and verbal instructions. * Detail-oriented with excellent organizational skills. * Able to handle multiple competing tasks and priorities. * Perform quality work efficiently with minimal supervision. * To work flexible shifts and schedules. * Use proper safety equipment and safety procedures. PLEASE NOTE: The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required. All U.S. applicants must be 18 years of age or older and all Canada applicants must be 16 years of age or older. Radius Recycling participates in e-verify for all U.S. new hires. An offer of U.S. employment by Radius Recycling or any of its subsidiaries is contingent on the satisfactory completion of a post-offer drug screen and background check. All new hires must review and sign an Arbitration Agreement. This applies to all U.S. non-union employees. As an Equal Opportunity Employer, Radius Recycling does not discriminate on the basis of race, religion, color, sex, marital status, disability status, national origin or ancestry, veteran status, age, prior industrial injury, sexual orientation, genetic information, or any other protected status under local, state or federal law.

The Jarraff Operator is responsible for trimming, pruning, and removing trees with the aid of a bucket truck or other equipment or tools. ESSENTIAL FUNCTIONS Always follow and help enforce safe practices and rules Assist in preparing truck and materials needed for each day at General Foreperson's direction Perform professional tree maintenance activities as directed by General Foreperson Clear and trim trees and brush away from utility lines; remove branches and tree material Clean up and dispose of all debris Maintain and keep track of all tools and equipment used in daily operations Constantly observe and practice climbing and tree maintenance skills in a continued effort to improve your own professional skills Be ready and willing to assist other crew members in all aspects of daily activities Safeguard employees and public from hazards in and around the work area by enforcing safe job practices, keeping work area clean and orderly, and staying in frequent voice communication with co-workers Perform duties for storm work as needed SUPERVISORY RESPONSIBILITIES Aerial Lift Trimmers have no direct reports. EXPERIENCE REQUIREMENTS Prior experience in electric utility vegetation management, construction, logging, landscaping, mechanical, or military industries preferred; previous aerial lift experience preferred EDUCATION REQUIREMENTS High School diploma or education equivalent preferred KNOWLEDGE, SKILLS, AND ABILITIES Must be able to demonstrate a working knowledge of all knots, ropes and rigging devices used in tree trimming and removal operations. Must be able to identify tree species Must be familiar with electrical hazards and appropriate operating procedures when in proximity to electrical conductors and aerial techniques in the event of an emergency aloft Must be able to work and maneuver at considerable heights under varying and adverse weather conditions Must possess physical strength and agility, good balance, good depth perception and the ability to hear verbal instructions from a distance. Must be able to obtain and maintain first-aid certification and CPR Must be able to administer and implement emergency rescue techniques, including tree rescue and all applicable first aid techniques Must be able to quickly remove yourself from a potential danger area Must be able to wear necessary personal protective equipment (PPE) Must be able to travel out of town for storm restoration work when needed This is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee. Other duties, responsibilities, and activities may change or be assigned at any time with or without notice. Work authorization requirements: Must meet I-9 requirements. Affirmative Action/EEO statement: Xylem Tree Experts and Kendall Vegetation Services provide equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities required of the employee for this job. Duties, obligations, and activities may change at any time, with or without notice. Benefits Offered: This is a full-time position that offers health insurance benefits for medical, vision, and dental, as well as the option for enrollment in a 401K. AI Usage Disclaimer: As part of our commitment to efficiency and innovation, we may use artificial intelligence (AI) tools during the recruiting and onboarding processes. These tools assist with tasks such as resume screening, interview scheduling, and communication. All decisions regarding hiring and employment are ultimately made by our human team. If you have questions or concerns about this process, please contact our HR department

If you are looking for an opportunity to work in a dynamic team environment where integrity and passion drive operational excellence, AmerCable is the place for you! AmerCable is an ISO 9001:2015-certified manufacturer of jacketed electrical power, control and instrumentation cables. The company's core markets, mining, oil and gas, and industrial, require complex cable designs that can operate reliably over long periods of time in harsh operating environments. As a customer-focused company, AmerCable's top priority is to help its customers be more productive and profitable with high-quality cable products and services, fast reliable delivery, field engineering support and outstanding customer service. All cable products are made in El Dorado, Arkansas or Katy, Texas. Benefits Health Insurance Dental/Vision Insurance Paid Time Off Life Insurance Paid Holidays 401K Matching AmerCable is an ISO 9001-certified manufacturer of jacketed electrical power, control and instrumentation cables. The company's core markets, mining, oil and gas, and industrial, require complex cable designs that can operate reliably over long periods of time in harsh operating environments. At this time, we are looking for a Shipping Operator to join our AmerCable Team. Responsibilities: Operate Mobile Equipment is used to handle materials in the department. Process production material into finished goods inventory. Follow procedural guidelines handling and processing materials Operate department cutting lines. Assist all other Team member as needed to increase efficiency. Monitor and improve product quality Monitor and improve operator/machine efficiency Operate the machines according to machine work instructions/SOP Produce product “on time” per current work schedule Comply with all safety rules at all times Follow all housekeeping practices Adheres to all AmerCable's Safety Standards and Safe Work Practices Follows and abides by Mattr's Code of Ethics and Business Conduct Standards Preferred skills and qualifications: Must be able to work in a non-climate-controlled environment Must be able to physically move material, possibly up to 75 lbs. Good reading comprehension is required. High school diploma or GED Ability to work extended hours as needed, including weekends and holidays. Must have basic mechanical abilities. Must be able to operate mobile equipment and computer systems Required training includes ISO 9000 principles AmerCable is an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law.

Loading and unloading pallets and other materials from trailers. ESSENTIAL DUTIES AND RESPONSIBILITIES * Locating product in warehouse * Pulling orders from warehouse racks using a log * Performing an initial walk-around of your forklift to ensure that it is in good working order before operating it, and reporting any problems or irregularities to maintenance * Staging and palletizing product * Lifting product, either on pallets or un-palletized * Performing light Quality Control to ensure that products are going to the correct areas * Performing general cleanup and maintenance of your work area Job Requirements EDUCATION AND EXPERIENCE * High School Diploma or equivalent * Experience operating a forklift for the same company for at least 6-12 consecutive months * Recent certification * Basic math/counting skills * Ability to pass a background check and drug screen * Good, clear visual ability * Ability to lift 30-50 pounds * Flexibility with regard to hours and scheduling * Experience with multiple forklift types (sit-down, stand-up, cherry-picker, clamp and reach) preferred * Experience in both loading/unloading as well as in placing product in warehouse racks preferred * Computer skills a plus

Extrusion Line Operator - Plastic Sheet Manufacturing 📍 🕒 Shift: 12 Hour Shifts, work 3 shifts one week, followed by 4 shifts the next 💼 Full-Time | Safety Sensitive Position (per Arkansas Medicinal Marijuana Provisions) Job Summary We are seeking a detail-oriented and safety-conscious Extrusion Line Operator to join our manufacturing team. This position is responsible for operating and maintaining plastic sheet extrusion equipment used in the production of food packaging materials. The ideal candidate will have a strong work ethic, a commitment to quality, and the ability to thrive in a fast-paced, team-oriented environment. ⚠️ Note: This is a Safety Sensitive Position under the Medicinal Marijuana Provisions of the State of Arkansas. Key Responsibilities Operate and maintain plastic extrusion lines to produce high-quality plastic sheet. Monitor and control production processes to ensure consistent output. Use measuring tools and equipment to verify product quality. Identify and differentiate raw materials used in production. Maintain accurate production and quality documentation. Keep work area and equipment clean and organized. Manage materials and inventory effectively. Perform other duties as assigned. Qualifications High school diploma or GED required. 3-6 months of related experience preferred. Career Readiness Certificate (Silver Level or above) is a plus. Basic computer skills required. Strong math and reading comprehension skills. Key Competencies Strong communication and teamwork skills. Attention to detail and quality-focused mindset. Problem-solving and decision-making abilities. Ability to work safely and efficiently in a high-paced environment. Work Environment & Physical Demands Exposure to loud noise, moving mechanical parts, and airborne particles. Frequent standing, walking, climbing, and lifting (up to 50 lbs). Requires good vision (close, distance, peripheral, depth perception, and focus adjustment). If you're ready to be part of a company that values safety, quality, and teamwork, we encourage you to apply today! Please attach a resume. All offers subject to drug screen and background check. EOE. EVerify.

FREZ-n-STOR is a commercial cold storage warehouse that provides quick freezing, handling and storage for the food industry. We are seeking motivated and detailed-oriented forklift drivers to join our Operations Department. Schedule and Pay: 1st shift: 6:00am or 7:00am start time (shifts runs from 8 to 10 hour). Hours may vary. 2nd shift: 4:00pm start time (shift runs from 8 to 10 hours). Hours may vary. Pay: $18.00/hr. - $19.40/hr. Requirements: Must be able to operate electric stand up reach trucks. Must be able to work in freezing temperatures - (Gear provided to keep warm). Must be able to work 8-10 hours per day. Must be able to lift 25 lbs. continuously throughout the shift. Steel Toe or composite boots. Specific Duties & Responsibilities: Lift and store heavy loads with an electric stand up reach truck. Move pallets in/out of freezers and blast cells. Retrieve orders for shipment. Follow procedures for correct inventory tracking. Wrap pallets to prepare for shipment. Add slats, restack boxes and remove broken pallets. Maintain work area clean. Benefits: 401(k) 401(k) Matching Medical Insurance Dental Insurance Vision Insurance Life Insurance Health Savings and Flexible Spending Short and Long Term Disability Paid Time Off

This is where your work makes a difference. At Baxter, we believe every person-regardless of who they are or where they are from-deserves a chance to live a healthy life. It was our founding belief in 1931 and continues to be our guiding principle. We are redefining healthcare delivery to make a greater impact today, tomorrow, and beyond. Our Baxter colleagues are united by our Mission to Save and Sustain Lives. Together, our community is driven by a culture of courage, trust, and collaboration. Every individual is empowered to take ownership and make a meaningful impact. We strive for efficient and effective operations, and we hold each other accountable for delivering exceptional results. Here, you will find more than just a job-you will find purpose and pride. Your Role At Baxter Set-up, adjust, and perform minor repairs on complex production equipment. May also operate equipment after set-up or monitor several machines for needed adjustments. Your team Baxter is focused on saving and sustaining lives by manufacturing high-quality products. We strive to create quality products for our customers each day. Delivering life-saving products is about getting them right, and attention to detail is how we make sure we meet that challenge. We are a team that supports each other throughout each shift. Working together in a supportive and open culture makes our processes evolve for the better and engages our workforce. What You'll Be Doing Performs some (up to all) of the following tasks: checking measurements, performing die adjustments, performing visual inspections, cleaning equipment and area, making labels, packaging and labeling rolls, palletizing, using batch trace, wrapping/moving finished product, monitoring process, completing changeovers, completing screen changes, completing die cleaning, updating batch boards, discarding scrap, operating forklift, creating/maintaining/verifying documentation, and cover other operators to allow for breaks. Performs all other duties as assigned. Responsible for quality and productivity of assigned line(s). What You'll Bring Must have basic computer skills, basic math skills, the ability to read and understand job instructions, and basic knowledge of tools. Must be able to write legibly and use a numbering system. May be required to operate forklift based on specific line responsibilities. Must understand and obey all safety rules and be able to perform all job tasks in a safe and timely manner. Must be willing to work overtime on weekends and off shift to cover absentees and vacations on other shifts. High School diploma or equivalent. TABE and 4-Cast training will be sufficient if completed prior to May 2010; otherwise, minimum score of Silver on the Career Readiness Certificate is required or BaxTech/SWAT in lieu of CRC. Industrial/Mechanical experience and knowledge of extrusion preferred. Physical / Safety Requirements Requires walking, lifting a minimum of 35 lbs., lifting above head, bending, twisting, pushing, stretching, squatting, pulling, reaching, standing, climbing, and carrying. Must be able to safely operate a forklift. Must pass forklift physical. Will work around heat and fumes. Duties may require overtime work, including nights and weekends Use of hands and fingers to manipulate office equipment is required Position requires standing and walking for extended periods of time We understand compensation is an important factor as you consider the next step in your career. At Baxter, we are committed to equitable pay for all employees, and we strive to be more transparent with our pay practices. The hourly rate for this role is $20.50per hour. We may pay more or less than of the anticipated range based upon market data and other factors, all of which are subject to change. Individual pay is based on upon location, skills and expertise, experience, and other relevant factors. For questions about this, our pay philosophy, and available benefits, please speak to the recruiter if you decide to apply and are selected for an interview. Applicants must be authorized to work for any employer in the U.S. We are un-able to sponsor or take over sponsorship of an employment visa at this time. US Benefits at Baxter (except for Puerto Rico) This is where your well-being matters. Baxter offers comprehensive compensation and benefits packages for eligible roles. Our health and well-being benefits include medical and dental coverage that start on day one, as well as insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance. Financial and retirement benefits include the Employee Stock Purchase Plan (ESPP), with the ability to purchase company stock at a discount, and the 401(k) Retirement Savings Plan (RSP), with options for employee contributions and company matching. We also offer Flexible Spending Accounts, educational assistance programs, and time-off benefits such as paid holidays, paid time off ranging from 20 to 35 days based on length of service, family and medical leaves of absence, and paid parental leave. Additional benefits include commuting benefits, the Employee Discount Program, the Employee Assistance Program (EAP), and childcare benefits. Join us and enjoy the competitive compensation and benefits we offer to our employees. For additional information regarding Baxter US Benefits, please speak with your recruiter or visit our Benefits site: Benefits | Baxter Equal Employment Opportunity Baxter is an equal opportunity employer. Baxter evaluates qualified applicants without regard to race, color, religion, gender, national origin, age, sexual orientation, gender identity or expression, protected veteran status, disability/handicap status or any other legally protected characteristic. Know Your Rights: Workplace Discrimination is Illegal Reasonable Accommodations Baxter is committed to working with and providing reasonable accommodations to individuals with disabilities globally. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application or interview process, please click on the link here and let us know the nature of your request along with your contact information. Recruitment Fraud Notice Baxter has discovered incidents of employment scams, where fraudulent parties pose as Baxter employees, recruiters, or other agents, and engage with online job seekers in an attempt to steal personal and/or financial information. To learn how you can protect yourself, review our Recruitment Fraud Notice.

The operator is responsible for removing molded parts from the molding machine, inspecting plastic parts, removing flash if necessary, inspecting for quality of parts, and then packaging parts. This position is also responsible for the initial quality inspection of the plastic part being produced in their work area by performing the following duties. Essential Duties, Functions, and Responsibilities Communicates with their supervisor when issues occur, packages parts, and labels correctly. Performs any tasks asked and/or assigned by their direct supervisor or the management team. Maintains a neat material storage area and ensures that the area is free from tipping or falling material hazards. Review blueprints or other instructions to determine operational methods or sequences. Follow all safety policies and procedures. Exhibit exemplary attendance and punctuality. Comply with company policies and procedures. Perform other duties as assigned. Qualifications Experience, Knowledge, Skills and Abilities Prior operating experience is a preferred. The ability to add and subtract two-digit numbers and to multiply and divide with 10's and 100's. The ability to give full attention to what other people are saying, take time to understand the points being made, and ask questions as appropriate. The ability to keep hands and arms steady while moving arms or holding arms and hands in one position. The ability to provide a high level of attention to detail and focus on the given task. The ability to quickly move hands to grasp, manipulate, or assemble objects. The ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects. The ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. The ability to deal with problems involving several variables in standardized situations. Company Benefits Include: Medical Dental Vision Aflac Life Insurance PTO 401k 401k Match

Job Description Cannelure Operator The Cannelure Operator is responsible for operating and maintaining cannelure machines used to form grooves (cannelures) on cartridge cases, bullets, or similar cylindrical components. The operator ensures products meet strict specifications and quality standards required in ammunition manufacturing or precision machining environments. Key Responsibilities: Set up and operate cannelure machines according to production schedules and job specifications. Monitor machine operation and adjust settings to ensure proper groove depth, spacing, and alignment. Inspect parts visually and with measuring instruments (e.g., calipers, micrometers, gauges) to ensure conformity to specifications. Perform routine machine maintenance and cleaning to ensure optimal operation. Record production data, including quantities produced, scrap, and inspection results. Troubleshoot minor machine issues and escalate mechanical problems to maintenance when necessary. Ensure all work is completed in compliance with safety procedures and quality standards. Maintain a clean and organized work area. Collaborate with quality control and other production team members to resolve defects or inefficiencies. Qualifications: High school diploma or equivalent (GED); technical training is a plus. 1+ year of experience in a manufacturing environment, preferably operating precision machinery. Familiarity with measuring tools and basic mechanical skills. Ability to read and interpret technical drawings, blueprints, or specifications. Strong attention to detail and commitment to quality. Ability to work independently and follow written and verbal instructions. Good hand-eye coordination and manual dexterity. Ability to lift up to 50 lbs and stand for long periods. Preferred Skills: Experience with ammunition or metal part manufacturing. Knowledge of quality assurance standards (ISO 9001, MIL-STD, etc.). Familiarity with Lean Manufacturing or Six Sigma principles.

The Forklift Operator transports materials between receiving, storage, and production areas using a forklift or other powered industrial trucks. Responsibilities 1.Load/unload trucks and move materials to designated locations. 2.Perform routine cleaning and organization of the production area. 3.Ensure loads are secure and stored safely. 4.Assist in warehouse organization and space optimization. 5.Comply with all traffic and safety rules within the facility. Requirements: Experience operating sit down / stand up forklifts Basic math skills for counting and verifying materials Ability to work in a fast-paced environment Safety Compliance, Spatial Awareness, Physical Stamina Valid forklift certification (OSHA- compliant)

Nutrien is a leading provider of crop inputs and services, and our business results make a positive impact on the world. Our purpose, Feeding the Future , is the reason we come to work each day. We're guided by our culture of care and our core values: safety, inclusion, integrity, and results. When we say we care, we mean it. We're creating an inclusive workplace where everyone feels safe, has a sense of belonging, trusts one another, and acts with integrity. Through the collective expertise of our nearly 26,000 employees, we operate a world-class network of production, distribution, and ag retail facilities. We efficiently serve growers' needs and strive to provide a more profitable, sustainable, and secure future for all stakeholders. Help us raise the expectation of what an agriculture company can be and grow your career with Nutrien. Commitment to Safety Nutrien's mission is to Feed the Future and though our Terminal takes this responsibility very seriously, our business success cannot be achieved without our core value of Safety, especially when it comes to our employees. Our Terminal operates on the principles of Do it safely or not at all , there is always time to do it safely , and Care for each other's health, safety and security . We have adopted a culture of care that encompasses both the physical and psychological safety of our employees and their wellbeing. About Our Leal Terminal Leal, ND Distribution Terminal opened in 1987 and employs 4 full-time employees. This Nutrien location stores and distributes anhydrous ammonia, which is moved inbound by Rail or Truck and outbound by truck. Our team size facilitates a family environment where teamwork is essential. About Our Operator Job If you have an interest in equipment operations and are looking for new opportunities in the Agriculture Industry, then we encourage you to explore this opportunity. We offer on the job training tailored to each new employee based on their experience level. There is opportunity for growth and advancement through long term succession planning and business need. This position is responsible for maintaining safe and efficient operation of the ammonia terminal area. The role includes handling shipments for both incoming and outgoing product fertilizers, recording data, and making operational corrections as required. Looking for your next opportunity as your season wraps up? Join our team for a permanent, hands-on role with on-the-job training! What you will do: Maintain, operate, and monitor equipment Maintain and operate computerized and non-computerized control systems Perform terminal site preventative maintenance Ammonia compressor, pump, and condenser maintenance Hose testing Troubleshoot, analyze, and repair site equipment to ensure site equipment reliability Pump seal replacement Valve repair and replacement Record and enter data readings Measure ammonia product and manage daily inventory Assist and Train drivers to load and unload product onto trucks through pump and piping systems General ground maintenance including mowing, weed eating, and snow removal Assist in contractor assessments and permitting of contractor tasks Provide excellent customer service to all internal and external customers Adhere to local, state, and federal governmental regulations and standards Entering Data into Computer system, Job Task Evaluations, Process Safety events, update and review Terminal Procedures, Equipment Maintenance Reports, and participation in morning toolbox and various other safety meetings What you will bring: Minimal experience required - On the job training provided High school diploma or equivalent Valid driver's license required Safety mindset Positive attitude Team oriented and reliable Strong written and verbal communications skills Possess intermediate computer skills, including Microsoft Office Works with minimal supervision and is self-motivated Willingness to learn with continuous improvement mindset Available for overtime and to be “on-call” to support Terminal during non-typical working hours as required Must be willing to travel occasionally for training courses and/or to assist at other terminals Instrumentation/electrical experience an asset Process Safety Management (PSM), experience an asset Must live within a 35-mile radius from the site Must be capable of wearing and passing respirator fit evaluation This position includes a 90-day probationary period, during which the employee's suitability for the role will be assessed. Ready to make an impact with us? Apply today! The estimated salary that Indeed, Glassdoor and LinkedIn lists does not represent Nutrien's compensation structure. Nutrien is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information, and other legally protected categories. . This job will remain posted until filled. In accordance with Nutrien policies, you will be required to undergo a background check, and may be required to undergo a substance test. While we appreciate all applications we receive, only candidates under consideration will be contacted. Applicants must meet minimum age requirements, as permitted by law. Our Recruitment Process: Application > Resume Review > Pre-screen/Interview > Offer > Pre-Employment Conditions > Welcome to Nutrien To stay connected to us and for the latest job postings and news, follow us on: LinkedIn, Facebook, Instagram, and X.

Superior Hydrovac is a full-service turn-key hydro excavation company dedicated to providing world-class hydrovac services across a diverse range of industries. With a highly trained workforce, a fleet of state-of-the-art hydrovac trucks, and the most advanced tools and technology in our field, we offer an unmatched level of expertise and capabilities. From project assessment and planning to execution and cleanup, Superior Hydrovac is specially equipped to handle every aspect of your excavation project. We are continually finding solutions to fit our customer's needs. Hydrovac Operators are skilled laborers running machinery designed to excavate and expose underground utilities safely. This role requires precision and expertise in equipment operation, safety protocols, and efficient excavation practices. Roles and Responsibilities: Responsible for the successful completion of hydro excavation projects including utility line exposure, debris removal, slot trenching, and digging Operate Hydrovac trucks and equipment in a safe and professional manner Supervise activities of Hydrovac Laborers in order to ensure employee skill development Set up and inspect grounding and/or bonding procedures for Hydrovac operation Complete all required paperwork properly and within set time lines Perform pre and post-trip inspections, as well as routine maintenance Performing Required Daily Vacuum Excavation Tasks: Potholing Existing Underground Utilities for HDD Work Pole Holes, Anchors, and Trench Work for Company Divisions Exposing Existing Underground Utilities for New Placement and Maintenance Work Success Factors: Knowledge of basic underground utilities Skills in operating heavy equipment and machines proficiently and safely Ability to use time and equipment efficiently to complete projects on time Ability to communicate effectively in a team environment Mechanical aptitude Mapping and Print Reading Ability to work in confined spaces Mechanical ability; and knowledge of equipment and heavy vehicle operation, maintenance, and repair Repetitive Lifting of Vac Piping Connections Willingness and ability to learn additional skills Experience and Education: Class A CDL Air Brake and Tanker Endorsement is required Minimum of 1 year of related experience or training Additional Requirements/Licenses/Certifications: Possession of, or ability to obtain, a valid State of Residence Driver's License is required within two weeks of employment. Candidates must pass criminal and Motor Vehicle Record (MVR) background checks and pass a pre-employment drug screen. Notes: The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer.

The Jarraff Operator operates heavy equipment of various types to remove branches and tree material from electrical lines. Must have past experience operating a Jarraff for this position. ESSENTIAL FUNCTIONS Always follow and help enforce safe practices and rules Assist in preparing equipment and materials for each day's work at Foreperson's direction Operate equipment as directed by Foreperson Help maintain and repair equipment and tools used in operations Assist other crew members in all aspects of daily activities and take a leadership role when required Cleans up and disposes of all debris Sets up barriers, warning signs, flags, markers, etc. to protect employees and public Keeps informed on new equipment, specifications, standard practices, operating procedures, and customer and company employee relations policies and practices. Track and report mileage to Foreperson Perform duties for storm work as needed SUPERVISORY RESPONSIBILITIES Equipment Operators have no direct reports. EXPERIENCE REQUIREMENTS Prior heavy equipment operating experience in electric utility vegetation management, construction, logging, landscaping, mechanical, or military industries preferred EDUCATION REQUIREMENTS High School diploma or education equivalent preferred KNOWLEDGE, SKILLS, AND ABILITIES Must be knowledgeable about the daily maintenance and safe operations of all equipment used Must possess physical strength and good balance to climb into and around mobile equipment Must be able to enter and exit a vehicle numerous times a day Must be able to work outdoors under varying and sometimes adverse weather conditions Must be able to hear verbal instructions from a distance Must be able to obtain and maintain first-aid certification and CPR Must be able to wear necessary personal protective equipment (PPE) Must have good vision and be attentive Must have and maintain a Driver's License if hired for a driving position; must have and maintain a CDL and DOT Medical Card to operate any truck over 26,000 lbs. Must be able to write, read and comprehend written and verbal job instructions/information Must be able to maintain balance over uneven terrain Must be able to communicate with others Must have endurance necessary to perform duties throughout a standard eight or ten hour day Must be able to travel out of town for storm restoration work when needed This is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee. Other duties, responsibilities, and activities may change or be assigned at any time with or without notice. Work authorization requirements: Must meet I-9 requirements. Affirmative Action/EEO statement: Xylem Tree Experts and Kendall Vegetation Services provide equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities required of the employee for this job. Duties, obligations, and activities may change at any time, with or without notice. Benefits Offered: This is a full-time position that offers health insurance benefits for medical, vision, and dental, as well as the option for enrollment in a 401K.

Reporting to the Shift Supervisor or Process Supervisor, the Operator is responsible for coordinating all activities on the conveyor by organizing the work orders at the load and unload stations. Loads and unloads product, completed the required paperwork and assists the Shift Supervisor/Process Supervisor in the safe operation of the system. Responsibilities * Responsible for operation of the plant in the absence of the Shift Supervisor and/or Process Supervisor. * Under the direction of the Process Supervisor: * Prepares dosimeters for work orders scheduled to be run. * Operates and takes readings on the dosimeter reader. * Assembles processed dosimeters with run data sheet, work orders and load/unload sheets. * Maintains accurate downtime and system configuration log. * Records input, dosimeter and unload information in the computer. * Familiar with and able to perform emergency procedures required by license. * Reports system problems to the Maintenance Supervisor or Maintenance Technician. * Knows how to replace designated mechanical components of the system and assists Maintenance as required. * Assist with other tasks as assigned by Supervisor. * SUPERVISION GIVEN: Oversees the work of others. Qualifications * High School Diploma or GED. * Thirty (30) days of experience working in a sterilization environment and meeting training requirements. * Must be able to read, write and speak fluent English. * Must be able to add, subtract, multiply and divide in all units of measure using whole numbers, fractions and decimals. * Must be willing to work established shifts. * Must be able to lift a minimum of 50 pounds and perform repetitive bending and lifting motions over a period of time. * Must have forklift driving experience. * Computer skills desired. Training Required * Must complete all required training for an "Operator" outlined in the training manual. Benefits Sotera Health offers a competitive benefits package that includes: * Medical, Rx, Dental, Vision, Disability, Life Insurance, Health Savings and Flexible Spending Accounts * 401(k) program with Company match that immediately vests * Paid holidays, vacation and sick time * Free financial planning assistance * Paid parental leave * Education assistance * Voluntary benefits including Critical Illness, Accident, Hospital Indemnity and Pet Insurance * Employee Assistance Program (EAP) All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or protected veteran status. Sterigenics U.S. LLC takes affirmative action in support of its policy to employ and advance in employment individuals who are minorities, women, protected veterans, and individuals with disabilities. We strongly encourage those from underrepresented groups to apply. VEVRAA Federal Contractor

Reporting to the Process Supervisor or Manager Operations, the Operator is responsible for monitoring the system which includes observing pressure, temperature and relative humidity measurements on charts or computer monitors. Ensures that product is moved through the facility at the appropriate times. Responsibilities Monitors system which includes: Observing pressure, temperature and relative humidity measurements on charts or computer monitors. Turning valves and adjusting controls to ensure the safe operation of the equipment. Observing sterilizers and auxiliary units to detect malfunctions and assisting with repairs as needed. Documenting and recording process readings. Reports any damaged product to the Shift Supervisor or Process Supervisor. Reports system problems to the Maintenance Supervisor or Maintenance Technician. Performs some daily and weekly equipment preventative maintenance tasks and may assist Maintenance as required. Stores and removes chemicals used in processing in accordance with established procedures and laws. Participates on plant safety committees and follows all established safety rules and regulations. Assists with other tasks as assigned by Supervisor. SUPERVISION GIVEN: Oversees the work of Process Assistant Operators Qualifications High School Diploma or GED. Minimum of six (6) months to one (1) year of experience working in a sterilization environment desired. Must be able to read, write and speak fluent English. Must be able to add, subtract, multiply and divide in all units of measure using whole numbers, fractions and decimals. Must be willing to work established shifts. Must be able to lift a minimum of 50 pounds and perform repetitive bending and lifting motions over a period of time. Must have forklift driving experience. Computer skills desired. Special Requirements Experience with a company using EO sterilization of products is desirable Must be medically approved for respirator use Must be able to tolerate exposure to high temperatures and high humidity (120F and 60% RH for 20 minutes) Benefits Sotera Health offers a competitive benefits package that includes: Medical, Rx, Dental, Vision, Disability, Life Insurance, Health Savings and Flexible Spending Accounts 401(k) program with Company match that immediately vests Paid holidays, vacation and sick time Free financial planning assistance Paid parental leave Education assistance Voluntary benefits including Critical Illness, Accident, Hospital Indemnity and Pet Insurance Employee Assistance Program (EAP) All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or protected veteran status. Sterigenics U.S. LLC takes affirmative action in support of its policy to employ and advance in employment individuals who are minorities, women, protected veterans, and individuals with disabilities. We strongly encourage those from underrepresented groups to apply. VEVRAA Federal Contractor

Acuren is currently recruiting for Drone Operators for an EMBEDDED role in Bentonville, Arkansas. . Responsibilities Organize and report test results Perform specialized inspections May instruct and supervise others Perform other job-related tasks as assigned by management Requirements High School Diploma or equivalent Some college preferred Demonstrated ability to effectively perform assigned NDT tasks and interpret results of inspections Knowledge of Drone equipment MUST BE ABLE TO PASS DRUG/ALCOHOL AND BACKGROUND SCREENS PER CLIENT REQUIREMENTS. Benefits Competitive salary Medical, dental, vision, and supplemental insurance 401K Plan Paid Holidays Paid Time Off Company Overview Acuren is a trusted, single source provider of technology-enabled asset protection solutions used to evaluate the structural integrity of critical energy, industrial and public infrastructures. Committed to delivering a Higher Level of Reliability , Acuren provides an unrivaled spectrum of capabilities including inspection, traditional and advanced NDE/NDT, failure analysis, rope access, materials engineering, field engineering, reliability engineering, drones, robotics, V-Deck and condition-based monitoring services. Our work is critical to the integrity and safety of industrial firms, including petroleum refinery, pipeline, power generation, pulp & paper, mining, pharmaceutical, aerospace and automotive industries. Acuren employs over 4,000 dedicated professionals supporting the mechanical integrity and inspection programs of the world's largest industrial segments. Acuren is a market leader. Our formula for success is straightforward: be capable locally, with certified and well-equipped personnel supported by trained, experienced leaders. Continuing to build on a strong heritage of safety, quality and professionalism, Acuren strives to maintain incident free work environments, pursues advanced technical developments, and supports reliability programs that are valued by clients and employees. #LI-BE1