Machine operator jobs in Northbridge, MA

Our Team Members are motivated, team oriented, friendly, dependable and driven to providing excellent guest service! A qualified candidate will serve our guests Hot and Fresh Food in a Clean and Safe environment in a Friendly and Fast manner. Previous fast food experience is preferred. Qualifications: Stand for up to 8 hours during a shift and be able to lift 30 to 50 pounds, Requires you to use motion that entails pushing, pulling, stretching and continuous bilateral use of fingers and wrists.

Are you looking to build your career in machining and manufacturing? We're seeking a CNC Machine Operator to join our team and play a key role in keeping production running smoothly. In this role, you'll work hands-on with CNC machines, ensuring quality parts are produced to spec while learning and growing your technical skills. What You'll Do: •Load and unload CNC machines and ensure parts meet quality standards. •Inspect parts and troubleshoot basic issues during production. •Read and interpret blueprints and drawings to complete jobs accurately. •Use measuring tools such as micrometers, calipers, indicators, and gauges. •Maintain safety and quality standards in a fast-paced production environment. What We're Looking For: •High school diploma or equivalent. •2+ years of CNC or machining experience preferred, but not required-we're willing to train the right person. •Basic machining knowledge and ability to use common inspection tools. •Strong work ethic, reliability, and ability to work independently with minimal supervision. •Team-oriented mindset and commitment to safety and quality. •Must be authorized to work in the U.S. Full-time.

Full-time Description 1st shift (6:00 a.m. - 3:00 p.m.) 2nd shift (3:00 p.m. - 12:00 a.m.). The position will train on 1st shift (6:00 a.m. - 3:00 p.m.) for approximately three months. As a Welding Machine Operator, you will perform a variety of standard operations to operate a computer-controlled welding machine to produce welded wire mesh to meet production schedule requirements, meet all quality specifications, perform set-ups, changeovers and assist with routine maintenance. The Welding Machine Operator does not physically perform the welding, the machine does. Requirements High School Diploma required or its equivalent with 2-5 years of experience as a machine operator or very good mechanical aptitude Must be able to work independently Must be detail oriented and organized Maintain a clean work area Lifting requirements up to approximately 50 lbs. Maintain high levels of efficiency and quality Good mechanical aptitude Essential duties and responsibilities: Work from specification sheets, job orders and verbal instructions Ensure that all wires are properly positioned for feeding into the welder Maintain continual visual inspection of product and process for proper positioning, welding, and cutting Clean and maintain welding electrodes on a regular basis and make minor adjustments to machine as needed Perform and record prescribed quality checks Inform supervisor of any processing or operating problems Remove welded rolls of mesh from rollers Palletize finished rolls Monitor wire field Perform general preventative maintenance task Help other machine operators as needed Benefits: We offer a competitive & market salary and a comprehensive benefits package including health insurance, dental, vision, life insurance, STD, LTD, 401(k), profit sharing. Riverdale Mills is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, genetics, disability, age, veteran status, or any other characteristic protected by law. Employment is conditioned upon successful completion of a background check and upon having the appropriate legal right to work. About Us: Riverdale Mills Corporation is one of the largest manufacturers of galvanized and PVC coated welded wire mesh in the world. A privately held company based in Northbridge, MA. Riverdale Mills specializes in the design and manufacturing of commercial, industrial and consumer wire products, tools and accessories for the marine, aquaculture, security, and construction and farming industries. The company's exemplary quality and manufacturing expertise is known worldwide.

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Security Clearance: None/Not Required At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. A Machine Operator B will set-up, run CNC and manual equipment, and operate machinery to perform a variety of machining and inspection operations on various materials. * Starting Wage: $31.74* * 3rd Shift - 10:00PM - 6:30AM - Andover, MA. This position is an onsite role.* * Must pass Technical Interview* What you will do: * Works to verbal, written and computer instructions * Selects tooling, fixturing, machine feeds and speeds, and methods, including calculating dimensions, to accommodate machining operations and processes. * Utilizes precision measuring equipment to machine and inspect parts and assemblies * Deburrs parts utilizing all available methods * Marks, identifies parts as required * Simultaneously operates multiple pieces of equipment/processes * Advances or retrieves product, material and tooling for self and others * Performs all duties contained in the Machine Operator C classification as directed * Performs general maintenance and housekeeping of workplace, tools and equipment * Maintains records, moves materials and follows safety rules in performance of duties * Performs other similar duties as required or directed * Machines, Tools, and Equipment used, includes but not limited to: All CNC and manually controlled machines required to perform any machining / inspection operations; holding fixtures, tooling, various hand tools and inspection equipment. Qualifications You Must Have: * High School Diploma or equivalent. * Minimum of 1 year experience in Machine Trades, Machining, and/or Maintenance Experience Qualifications We Prefer: * Minimum of 2 years working knowledge of Geometric Dimensioning and Tolerancing ( GD&T) What We Offer: * Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation. Please consider the following role type definitions as you apply for this role. * Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. This position is part of a collective bargaining agreement. Wage and workplace conditions, including shift times, are subject to this agreement. Individuals hired into this position will be represented by a union. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Join the Gaco team, a trusted name in building envelope solutions with a heritage dating back to 1955. We're seeking a Machine Operator who's ready to be part of a company committed to formulating everyday success for every customer through innovative, reliable products used to adhere, seal, and protect at every level of the building envelope. Job Title: Machine Operator | Req ID: 15188 | HR Contact: Edgar Alexander DERCE MOLINARES | Location: Building Envelope - Rockland, MA ABOUT THE ROLE AMRIZE is a leading international manufacturer and supplier of a comprehensive product portfolio for commercial building performance solutions. This position is responsible for operating the pour table and laminator, verifying product run information is correct, and driving operational efficiencies e.g. wet density and line speed. Starting pay $28.12 Monday through Thursday from 6am to 4:30pm. WHAT YOU'LL BE DOING * Check the status of equipment in the production operating system. * Responsible for preparing each run according to the daily production schedule. * Validating batch information and set up. * Monitors each run for quality and efficiency e.g., wet density and line speed. * Adjusts equipment settings based on quality control feedback. * Capturing production run information (chemical used, downtime, and scrap reporting) and inputting data into the production data base. * Maintains the hour by hour board. * Maintain the 5 S posture of the Machine Operator area. * Other duties as assigned by supervisor. WHAT ARE WE LOOKING FOR * High School Diploma; or 1-2 year vocational training/associates degree * Strong Math Skills * Data Entry Experience * Forklift certified * Safety conscious mindset * Basic maintenance skills * Basic computer skills WHAT WE OFFER * Competitive Compensation * Retirement Savings * Medical, Dental, Disability and Life Insurance Coverage * Holistic Health & Well-Being Programs * Health Savings Accounts (HSA) & Flexible Spending Accounts (FSA) for Health and Dependent Care * Vision and other Voluntary Benefits and Discounts * Paid Time Off and Holidays * Paid Parental Leave (Maternity and Paternity) * Educational #HBEIA BUILDING INCLUSIVE WORKSPACES At Amrize, there is endless opportunity for you to play your part. Whether you're in a technical, managerial, or frontline role, you can shape a career that works for you. We're seeking builders, creative thinkers and innovators. Come put your expertise to work while developing the knowledge and skills to drive your career forward. With us you'll have the chance to build your ambition! Amrize North America Inc. takes pride in our hiring processes and our commitment that all qualified applicants will receive consideration for employment without regard to age, race, color, ethnicity, religion, creed, national origin, ancestry, gender, gender identity, gender expression, sex, sexual orientation, marital status, pregnancy, parental status, genetic information, citizenship, physical or mental disability, past, current, or prospective service in the uniformed services, or any other characteristic protected by applicable federal, state or local law. Amrize North America Inc, and its respective subsidiaries are Equal Opportunity Employers, deciding all employment on the basis of qualification, merit and business need. Amrize Canada Inc. is committed to the principles of employment equity and encourages the applications from women, visible minorities, and persons with disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request accommodation in order to apply for a position with us, please email recruiting-accommodations@amrize.com. This email address should only be used for accommodations and not general inquiries or resume submittals. In Ontario, our organization/business is committed to fulfilling our requirements under the Accessibility for Ontarians with Disabilities Act. Under the Act, accommodations are available on request for candidates taking part in all aspects of the selection process. While we sincerely appreciate all applications, only candidates selected for an interview will be contacted.

As part of the Research & Advanced Development group, you will research and develop new approaches to solving challenging manipulation problems for real-world robotics systems, allowing them to understand and interact with their environment in unprecedented ways. Your work will contribute to enhancing the capabilities of our robotic solutions and explore new solutions and approaches, unlocking new value we deliver to our customers. This position offers a unique opportunity to work at the cutting edge of robotics applied to real-world challenges. This role will be onsite at the Bedford, MA office. This position will run from approximately Jan. - June 2026 (dates flexible). We are seeking interns in a variety of disciplines related to robot learning including: * Imitation learning for complex, agile manipulation behaviors with suction and finger-based grippers * Reinforcement learning to improve manipulation robustness and dealing with new situations * AI systems (VLM, other) applied to various warehouse tasks, such as dealing with unexpected situations, dense packing, or error/damage detection. * Gripper morphology optimization across large scale product data In this role you will: * Perform applied research in robot learning to address real-world warehouse challenges * Collaborate with other researchers and engineers to apply research findings to our robots * Leverage production data and our internal development systems to implement and evaluate your solutions Qualifications * Currently pursuing an advanced degree (MS or PhD) in Robotics, Machine Learning, Computer Science, or a closely related field. * Strong software development expertise in Python; C++ is a plus * Demonstrated proficiency with major deep learning frameworks such as PyTorch * Experience with modern machine learning methods such as imitation learning, reinforcement learning, generative models, vision transformers, or related. * Exposure to developing ML models for hardware interacting with the real world * Experience developing in Linux (Ubuntu) and ROS COOP-2517TK

Tutor Intelligence, an MIT robotics startup, has developed a novel no-code interface to instruct robots on new tasks. We are deploying this technology to factories and warehouses across America, and are growing our team to support 24-7 operations. This is an operational role - perfect for someone who is looking to get involved with technology and join a fast-moving startup. In this role, you will work to keep the robots in the field happy and healthy. Your responsibilities include: * Instructing robots via a web-based portal* Responding to customer support calls and resolving technical issues* Learning protocols for diagnosing and solving robot issues* Tracking robot performance and providing feedback to engineering* Reporting bugs and testing new features This role is shift-based and requires regular weekend coverage. Shift 1: 6:30am - 3:30pmShift 2: 3pm - 11pmShift 3: 11pm - 7am (Overnight) Shift 4: 11am - 7pm (Sat-Weds) We have weekend and holiday operations, which mean you will be scheduled for at least one weekend day and holidays (as needed). This opportunity comes with benefits, including health insurance. We are fully in-person in Watertown MA, with parking onsite. We are a startup looking for people who are eager and excited to do what they can, to ensure the team is making progress and our mission is successful. If this sounds like you (and you don't mind hanging with a bunch of robot nerds :), then we look forward to your application!

Job Description The Extrusion Operator will set up and run various extrusion machines and ancillary equipment in the manufacturing of medical and non-medical extruded tubing. The operator will be expected to perform his/her job duties safely and with attention to the execution of all tasks with efficiency and quality. Essential Duties & Responsibilities Set ups, tear downs, operates and cleans extrusion machines and ancillary equipment within supplied specification. Performs moisture analysis on raw materials and ensures utmost quality of extruded product by performing quality inspections using a variety of measurement equipment including, but not limited to: Pin gauges Micrometers Verniers Video microscopes Laser micrometers Troubleshoots extrusion issues as needed. All other responsibilities as assigned by supervisor. Required Qualifications: 3 years of manufacturing/machine operator experience preferred. Willing to train mechanically inclined candidates. Must be able to read, apply and train others on documented work instructions. Must be able to perform basic math and use basic tools, such as ruler, calculator, etc. Must possess ability to calculate the tooling necessary for new single lumen extrusions, run time, part weights and raw material required for order Reads and interprets customer and internal product specifications and prints Preferred Qualifications: High school diploma or equivalent Advanced related technical schooling Physical Requirements: Physically able to lift up to 50 pounds, stand, and/ or walk for prolonged periods of time. Must possess fine hand motor skills to handle small manufacturing tools, QC tools and fine product.

Overview Works under direction of department foreman to prints, sketches or verbal instructions. Machine product from various materials to blue print, sketches, work instructions and work procedures. Responsibilities May be required to setup and operate less complex machine tools as: cutoff saw, belt sander, drill, lathes and milling machines. Responsible for machining and inspecting product to insure it is within specifications. Able to operate CNC Perform all machining operations, including but not limited to Milling, Turning, Facing, and Drilling, Reaming, Threading, Tapping, Deburring and assembly of product. Perform basic machine maintenance as instructed. Maintain a clean and organized work area. Fully responsible for the quality of their own work. Comply with all company safety policies, procedures and practices. Participate in efforts to achieve department and company goals. Work overtime as required. Perform other related duties as assigned. Qualifications Education/Experience: High School Diploma or equivalent - Trade School Diploma preferred. Minimum two years of hands- on experience in the set-up and operation of CNC and Manual Machine Tools. Experience with the methods and devices to lift heavy irregularly shaped objects. Knowledge: Shop mathematics, able to read complex blue prints, Understand order of machining operations and good manufacturing practices. Skill: Able to correctly use and read precision measuring tools (i.e. Micrometers, Vernier Calipers and indicators) Ability to control the machine tool to hold specified tolerances. Verbal and written communication skills to convey information within the organization. Ability to solve practical manufacturing problems with little guidance Basic computer skills (i.e. data entry, editing, searching). Ability to organize and prioritize daily tasks. Physical/Environmental Demands: Possess manual dexterity sufficient to reach/handle items, works with the fingers, and perceives attributes of objects and materials. Be able to lift heavy weight, carry at least 50 pounds and move, pull or push materials of this magnitude. Work near moving mechanical parts. Periodically exposed to hazards of a serious nature requiring care in the use of machinery as well as the use of personal protective equipment. Education/Experience: High School Diploma or equivalent - Trade School Diploma preferred. Minimum two years of hands- on experience in the set-up and operation of CNC and Manual Machine Tools. Experience with the methods and devices to lift heavy irregularly shaped objects. Knowledge: Shop mathematics, able to read complex blue prints, Understand order of machining operations and good manufacturing practices. Skill: Able to correctly use and read precision measuring tools (i.e. Micrometers, Vernier Calipers and indicators) Ability to control the machine tool to hold specified tolerances. Verbal and written communication skills to convey information within the organization. Ability to solve practical manufacturing problems with little guidance Basic computer skills (i.e. data entry, editing, searching). Ability to organize and prioritize daily tasks. Physical/Environmental Demands: Possess manual dexterity sufficient to reach/handle items, works with the fingers, and perceives attributes of objects and materials. Be able to lift heavy weight, carry at least 50 pounds and move, pull or push materials of this magnitude. Work near moving mechanical parts. Periodically exposed to hazards of a serious nature requiring care in the use of machinery as well as the use of personal protective equipment. May be required to setup and operate less complex machine tools as: cutoff saw, belt sander, drill, lathes and milling machines. Responsible for machining and inspecting product to insure it is within specifications. Able to operate CNC Perform all machining operations, including but not limited to Milling, Turning, Facing, and Drilling, Reaming, Threading, Tapping, Deburring and assembly of product. Perform basic machine maintenance as instructed. Maintain a clean and organized work area. Fully responsible for the quality of their own work. Comply with all company safety policies, procedures and practices. Participate in efforts to achieve department and company goals. Work overtime as required. Perform other related duties as assigned.

Perform inspection of product run through Automated 5DX x-ray inspection equipment as it is manufactured on the SMT line. Essential Duties and Responsibilities: * Verify process compliance to established 5DX programs with respect to selecting programs, identifying failures called out by the program and entering defect data into OCuity, as well as data transfer between 5DX and PLR. * Adhere to all ESD requirements and Board Handling. * Use of Moisture Sensitive Device (MSD) handling requirements based on the components' moisture sensitive levels (MSL). * Verify product compliance to workmanship standards as documented in work instructions. * Verify integrity of data collected by machinery. * Communicate defects not captured by equipment to responsible personnel for enhancement of program integrity. * Communicate to assembly operators defects being noted during the 5DX program review. * Support and follow all ISO standards related to NEOTech's various Quality Management Systems. These systems may include, but are not limited to, quality, the environment, health, safety and security. * Support all corporate and site 5S objectives. * Perform all other duties, as assigned.

Location: North Kingstown, United States of AmericaThales people architect identity management and data protection solutions at the heart of digital security. Business and governments rely on us to bring trust to the billons of digital interactions they have with people. Our technologies and services help banks exchange funds, people cross borders, energy become smarter and much more. More than 30,000 organizations already rely on us to verify the identities of people and things, grant access to digital services, analyze vast quantities of information and encrypt data to make the connected world more secure. Position Summary This is an on-site position in North Kingstown, RI This position is eligible for the Americas referral program for external candidates: Tier 1 - $2500 Referral Bonus. Machine Operator will operate various card production equipment to personalize debit/credit cards according to customers' specifications. Work with other operators, technicians, and supervisory staff to achieve daily / monthly goals. Perform minor equipment maintenance and adjustments per written and oral instructions. Work independently, performing quality inspections on own work according to production standards. Identify potential production and quality problems, recommending remedial, corrective or contingency action. Awareness and compliance with all security and production policies & procedures. Essential Functions / Key Areas of Responsibility Must be able to work in a high-paced environment Operate card production equipment and perform related activities Confirm work receipt Formulate and implement work priority decisions Exceed production output and quality standards Perform minor equipment maintenance and adjustments per written and oral instructions Work independently performing quality inspections on own work to production standards Maintain a clean and orderly work area Identify potential production and quality problems; recommending remedial, corrective or contingency action Work with other operators, technicians and supervisory staff to assist with problems and to an effective work environment Awareness and compliance with all security and production policies/procedures Must possess basic computer skills Maintain housekeeping standards of workstation Order supplies as needed Attend appropriate training and meetings as required Meet safety standards Minimum Requirements High School Diploma or equivalent experience Basic computer skills Basic math skills required Good communication skills in both written and verbal Strong analytical, numerical and reasoning abilities Ability to write routine reports and correspondence Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form Ability to establish credibility and be decisive - but able to recognize and support the organization's preferences and priorities Preferred Qualifications 1-3 years' experience in mechanical ability 1-3 years' experience in safety rules and maintenance instructions Intermediate computer skills Physical Demands Required to be standing and operating a machine 6+ hours a day #LI-Onsite #LI-AS007 This position will require successfully completing a post-offer background check. Qualified candidates with [a] criminal history will be considered and are not automatically disqualified, consistent with federal law, state law, and local ordinances. We are an equal opportunity employer, including disability and veteran status. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you need an accommodation or assistance in order to apply for a position with Thales, please contact us at ************************************. The reference Total Target Compensation (TTC) market range for this position, inclusive of annual base salary and the variable compensation target, is between Total Target Cash (TTC) 35,888.63 - 58,265.40 USD Annual This reflects how companies in a similar industry and geographic region generally pay for similar jobs. This range helps the Company make pay decisions as one data point among many. Where a position falls within this range is also dependent on other factors including - but not limited to - the employee's career path history, competencies, skills and performance, as well as the company's annual salary budget, the customer's program requirements, and the company's internal equity. Thales may offer additional benefits and other compensation, depending on circumstances not related to an applicant's status protected by local, state, or federal law. (For Internal candidate, if you need more information, please reach out to your HR Shared Service, 1st Point) Thales provides an extensive benefits program for all full-time employees working 30 or more hours per week and their eligible dependents, including the following: •Elective Health, Dental, Vision, FSA/HSA, Voluntary Life and AD&D, Whole Group Life w/LTC, Critical Illness, Hospital Indemnity, Accident Insurance, Legal Plan, Identity Theft, and Pet Insurance •Retirement Savings Plan after 30 days of employment with a company contribution and a match, and with no vesting period •Company paid holidays and Paid Time Off •Company provided Life Insurance, AD&D, Disability, Employee Assistance Plan, and Well-being Program

FCS Reporting to the Operations Manager The above position is vacant at our Worcester Branch. The overall purpose of this position is to distribute and receive consignments. Minimum Requirements: * Clear criminal record * PSIRA accredited with a minimum Grade C qualification is advantageous * At least 1 years' experience in security industry or similar role * Computer literate (compulsory) * Possess excellent communication skills * Must be able to work at night * Able to work under pressure * Physically fit Job Specification (not totally inclusive): * Prepare for vault room duties * Planning of the vault room schedules CIT * Receiving and distributing of consignments to and from CIT teams * Scanning of consignments * Balancing of vault and locking up * Sorting of consignments * Documentation and administration duties * Searching duties Other Personality Attributes and Core Competencies: * Accuracy * Good interpersonal skills * Organising and planning ability * Quality assurance * Willing to work overtime * Customer focus * Team Work * Honest and reliable We reserve the right not to make an appointment to any advertised position. Whilst preference is given to existing employees at all times and the choice made is purely on merit, Historically Disadvantaged Candidates and Black Female Candidates are encouraged and supported in the FSG team. Whilst black female candidates will be given priority as per our transformation policy subject to the above criteria. Fidelity Services Group (Pty) Ltd supports global fair practice and business ethics on continuous development of our human capital as the key resource to our success in the markets in which we participate. Should you not be contacted regarding this position within 10 working days from the closing date, please regard your application as unsuccessful.

Machine Operator I operates production equipment, is responsible for manufacturing and assembly of customer products. Follows blueprints, guidelines, and travelers to ensure product specifications and that tolerance levels are met. Being a Machine Operator I maintain the required records of production reports any inconsistencies or equipment issues following standard procedures. Machine Operator I is an entry level position with some understanding of manufacturing equipment. Role and Responsibilities * Ability to use inspection equipment (micrometers, calipers, comparator, etc.) * Maintains a high standard of quality. * Performs first piece and in process inspection(s) * Keeps record of all inspections and parts run. * Strive to maximize efficiency and improve quality. * Perform ERP system transactions. * Flexible with the ability to change job priorities as instructed. * Comfortable with cross-functional tasks to support a continuously improving environment. * Run both manual and CNC controlled manufacturing equipment. * Other duties as assigned. Qualifications * Ability to work with small diameter parts requiring tight tolerances and high-quality finishes. * Ability to read blueprints/drawings is desirable. * Have good mechanical and math aptitude, understand work instructions. * 1-2 years' industrial experience in manufacturing/machine operating is preferred. * Good communication skills. * Dependable, efficient and productive work habit * Good problem-solving skills. Education Requirements High school diploma or equivalent. Physical Requirements: * Frequent performing repetitive work. * Occasional lifting (max. 40 lbs.) * Occasional carrying (max. 40 lbs.) * Subject to physical hazards from moving equipment and machine parts * Constant safety glasses * Constant full PPE (where required) * Frequent standing * Occasional sitting, walking, pushing, pulling, reaching. M-F 7:00am to 3:15pm

Performs the operational functions of data manipulation on various types of label equipment within the department to meet production quality standards and deadlines. ESSENTIAL DUTIES and RESPONSIBILITIES include but may not be limited to the following: Operates the label machines properly and efficiently in order to meet production deadlines according to the daily job schedule. Minimizes waste or misuse of raw materials. Communicates label production issues with the Production Supervisor or the Manager. Maintains a daily and weekly schedule of cleaning and maintenance for the machines within the department. Performs distribution functions as needed. Maintains inventory levels of raw materials within the production areas. Keeps an accurate log of raw materials used in the production of labels. Logs date and ID number of cartons of product to maintain a FIFO inventory and to identify any quality control problems with raw materials. Uses TCM system to log each job accurately and correctly to record time and materials for each job. Responsible for maintenance of all dies. Keeps all work areas safe, clean and in good condition. Follows any other instructions given by supervisors and/or management to complete other tasks or projects, ensuring the objectives are accomplished accurately and within the timeframe allotted. Maintains a clean, organized and safe work area, uses required PPE, and follows all safety rules and procedures. May be required to work overtime or on another shift as needed. EDUCATION and/or EXPERIENCE: High School diploma or general education degree (GED); or one year job related experience and/or training; or equivalent combination of education and experience. The ideal candidate will possess prior experience running digital inkjet presses and have strong mechanical and computer aptitude. Operators are responsible for operating a machines at budgeted waste and production numbers while ensuring that safety and quality policies and procedures are followed, as well as ensuring that production meets the targeted service goals and cost objectives. Strong candidates should have experience in variable data printing and/or mailing services. Must be detail-oriented, a self-starter and have the demonstrated ability to prioritize while maintaining high levels of organization, productivity and versatility. Candidates must also possess a sense of urgency, high energy, a great attitude with excellent communication skills. Further relevant experience is in set up and operations of intelligent and generic inserters (DM10 or Flow Master) as well as print bindery equipment like stitchers, perfect binders, cutters, custom trimmers, folders, mailers, tippers and poly wrappers. MANAGEMENT DISCLAIMER: Vestcom's Management reserves the right to revise, change or modify the duties and responsibilities of this position at any time to meet business and organizational needs. This position description may not list all duties for this position. The incumbent in the position may be asked to perform other duties. This position description is not a contract for employment and either the incumbent or Vestcom may terminate employment at any time, for any reason. ABOUT VESTCOM: Vestcom Parent Holdings, Inc. is the leading provider of tech-enabled shelf-edge pricing and promotion communications for the retail industry. Established in 1985, Vestcom helps clients transform their retail environment to be more engaging to consumers and more efficient for retail store teams. Vestcom provides its Retail and CPG clients with proprietary software solutions that drive edge-of-shelf media pricing, advertising, and planogram information; nutritional content; and other critical data that drives their businesses. Vestcom's services and technology are leveraged in over 60,000 retail stores nationwide and facilitate tens of billions pricing and promotional updates each year (example clients include Kroger, Albertsons/Safeway, Walgreens, and Dollar General). With more than 50 patents and a rich culture of innovation, the company has experienced tremendous growth throughout its history. Vestcom is led by Chairman & CEO, John Lawlor, who joined the company in 2009. John and the senior leadership team are focused on driving the vision for the company's future growth and building on its expertise of content integration and history of innovation in execution at the shelf-edge. Vestcom is owned by Charlesbank Capital Partners. Charlesbank is a Boston-based middle-market private equity firm with a 20-year track record of superior investment returns. For many years, the firm managed an investment portfolio solely for the Harvard University endowment, before establishing Charlesbank as an independent firm in 1998. Charlesbank is now actively investing its ninth fund, its largest fund to date. Vestcom is headquartered in Little Rock, Arkansas and has 10 production facilities across the United States. The company also operates in the United Kingdom. You can learn more at ****************

Join the global leader in the fast-growing playing cards and board games industry. Cartamundi's purpose is “Sharing the Magic of Playing together”. A powerful purpose that drives social and interactive customer experiences with a human touch both online and in the physical world. The Guillotine Cutter, Machine Operator operates an overhead knife cutting stock to precise measurements for game money, score pads, cards, etc. This person will program the cutting sequence into the cutter's computer while following the work instruction on the time ticket. This role requires a high attention to detail and precision. What You'll Do as a Guillotine Cutter, Machine Operator: Responsible for accurately reporting production and waste counts by verifying sheet/piece counts using prescribed methods. Operator is responsible for changing blades and performing required TPM. Responsible for the overall operation of the cutting cell including setups and changeovers. Both paper processing and board/card conversion. Must make productivity and quality standards on all cutting operations following applicable QSAMs. Move between Cost Centers to support business needs. Train new/transferred employees as required. Works under limited supervision and must be able to operate a forklift. Supports and participates in Continuous Improvement, Safety, Quality, and Environmental programs and/or other operational strategies. We're Looking for a Guillotine Cutter, Machine Operator Who Has: Ability to make good judgement. Basic math skills, including decimals and fractions. Ability to use measuring instruments to calculate cut dimensions with a high degree of accuracy. Ability to learn to operate all overhead knives and cutting processes. Physical Requirements Include the Ability to: Stand or sit for an 8-hour shift Repetitively grasp, pinch, push and pull with arms hands, occasionally simultaneously, with and without mechanical assisted devices Frequently transfer objects and materials weighing up to 25 lbs Reach above shoulder height to work, bending and stooping occasionally to work at different heights Safely mount, dismount and operate mobile equipment Move from one area to another in the department around equipment, climb stairs, platforms and ladders This Guillotine Cutter, Machine Operator position is located on-site in our East Longmeadow, MA facility What Benefits a Guillotine Cutter, Machine Operator Can Expect from Cartamundi: Competitive pay and shift differential Climate controlled facility 401(k) with company match Health, dental, and vision insurance starting day one HSA and FSA Life insurance Short Term Disability Paid time off Tuition reimbursement Employee discounts on daycare, gym memberships, travel, and much more Apply today and discover the magic of making a difference at Cartamundi! This position is a member of Local 224 RWDSU. Cartamundi does not discriminate on the basis of race, sex, color, religion, age, national origin, marital status, disability, veteran status, genetic information, sexual orientation, gender identity or any other reason prohibited by law in provision of employment opportunities. Candidates must be 18 years old to work for Cartamundi. No agencies please. No sponsorship available. About Cartamundi: Cartamundi is responsible for sales and distribution of its own American household Playing Card and Games brands like BICYCLE , BEE , KEM , ARISTOCRAT and HOYLE . Internationally, Cartamundi owns many other leading brands such as Fournier , Shuffle , COPAG , Grimaud , Color Addict to name few. Next to our own brands, we are the manufacturer of excellence for our customer's nostalgic card and board games and collectable cards such as Monopoly , Pokémon , UNO , Disney, Harry Potter and Magic the Gathering . A truly global company, Cartamundi is in full expansion and increasing its local presence through strategic partnerships and investments. Currently, Cartamundi operates across 23 locations (including 13 factories) throughout the Americas, Asia, and Europe, with over 2500 employees, and products being sold in more than 185 countries. In 2020, Cartamundi celebrated its 50th anniversary starting back in 1970 when 2 Belgian families merged their Playing Cards business in the heart of Europe. Today, Cartamundi North America represents its largest business, with 3 Customer Design Centers, 4 large Manufacturing units and providing jobs to over 1,500 people. In North America, for 140 years, The United States Playing Card Company (“USPC”) has been the leader in the distribution and production of premier playing cards and a creator of innovative family-friendly games. Whether it is a game of blackjack on the casino floor or game night with the family our brands and products play a part.

Machine Operator will operate various card production equipment to personalize debit/credit cards according to customers'specifications. Work with other operators, technicians, and supervisory staff to achieve daily / monthly goals. Perform minor equipment maintenance and adjustments per written and oral instructions. Work independently, performing quality inspections on own work according to production standards. Identify potential production and quality problems, recommending remedial, corrective or contingency action. Awareness and compliance with all security and production policies & procedures. Physical Demands Required to be standing and operating a machine 6+ hours a day Essential Functions / Key Areas of Responsibility Must be able to work in a high-paced environment Operate card production equipment and perform related activities Confirm work receipt Formulate and implement work priority decisions Exceed production output and quality standards Perform minor equipment maintenance and adjustments per written and oral instructions Work independently performing quality inspections on own work to production standards Maintain a clean and orderly work area Identify potential production and quality problems;recommending remedial, corrective or contingency action Work with other operators, technicians and supervisory staff to assist with problems and to an effective work environment Awareness and compliance with all security and production policies/procedures Must possess basic computer skills Maintain housekeeping standards of workstation Order supplies as needed Attend appropriate training and meetings as required Meet safety standards Minimum Requirements: High School Diploma or equivalent experience Basic computer skills Basic math skills required Good communication skills in both written and verbal Strong analytical, numerical and reasoning abilities Ability to write routine reports and correspondence Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form Ability to establish credibility and be decisive -but able to recognize and support the organization's preferences and priorities Preferred Qualifications 1-3 years'experience in mechanical ability 1-3 years'experience in safety rules and maintenance instructions Intermediate computer skills

WHY RANFAC? At Ranfac you own your success and career path. We provide an opportunity to advance your career in an environment that encourages growth and learning. You have a voice and can be an engine for change. Joining Ranfac is joining a family atmosphere where work life balance is a guarantee. You have the opportunity to make a difference by doing work that matters to manufacture advances in healthcare. Learn more about Ranfac by visiting ************** today! Overview Operates equipment and ensures that parts are to specification prior to quality control. First shift 7:30 a.m. - 4:00 p.m., Monday - Friday only. This shift is not flexible. Entry level Machine Operator Position with the following skills: Perform math skills - Addition, subtraction, multiplication, and division Inspection required with proper use of scales- Micrometers, calipers, and optical comparators and various other gauges Strong Analytical skills -Blueprints, schematics, models and other specifications Demonstrate a positive attitude and respond to requests in a timely and respectful manner. Keen attention to detail Commitment and ability to follow safety rules and procedures and utilize safety equipment Dependable, flexible and collaborates well with team members High school diploma/ged

Job DescriptionDescription: 1st shift (6:00 a.m. - 3:00 p.m.) As a Welding Machine Operator, you will perform a variety of standard operations to operate a computer-controlled welding machine to produce welded wire mesh to meet production schedule requirements, meet all quality specifications, perform set-ups, changeovers and assist with routine maintenance. The Welding Machine Operator does not physically perform the welding, the machine does. Requirements: High School Diploma required or its equivalent with 2-5 years of experience as a machine operator or very good mechanical aptitude Must be able to work independently Must be detail oriented and organized Maintain a clean work area Lifting requirements up to approximately 50 lbs. Maintain high levels of efficiency and quality Good mechanical aptitude Essential duties and responsibilities: Work from specification sheets, job orders and verbal instructions Ensure that all wires are properly positioned for feeding into the welder Maintain continual visual inspection of product and process for proper positioning, welding, and cutting Clean and maintain welding electrodes on a regular basis and make minor adjustments to machine as needed Perform and record prescribed quality checks Inform supervisor of any processing or operating problems Remove welded rolls of mesh from rollers Palletize finished rolls Monitor wire field Perform general preventative maintenance task Help other machine operators as needed Benefits: We offer a competitive & market salary and a comprehensive benefits package including health insurance, dental, vision, life insurance, STD, LTD, 401(k), profit sharing. Riverdale Mills is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, genetics, disability, age, veteran status, or any other characteristic protected by law. Employment is conditioned upon successful completion of a background check and upon having the appropriate legal right to work. About Us: Riverdale Mills Corporation is one of the largest manufacturers of galvanized and PVC coated welded wire mesh in the world. A privately held company based in Northbridge, MA. Riverdale Mills specializes in the design and manufacturing of commercial, industrial and consumer wire products, tools and accessories for the marine, aquaculture, security, and construction and farming industries. The company's exemplary quality and manufacturing expertise is known worldwide.

As part of the Research & Advanced Development group, you will research and develop new approaches to solving challenging manipulation problems for real-world robotics systems, allowing them to understand and interact with their environment in unprecedented ways. Your work will contribute to enhancing the capabilities of our robotic solutions and explore new solutions and approaches, unlocking new value we deliver to our customers. This position offers a unique opportunity to work at the cutting edge of robotics applied to real-world challenges. This role will be onsite at the Bedford, MA office. This position will run from approximately Jan. - June 2026 (dates flexible). We are seeking interns in a variety of disciplines related to robot learning including: Imitation learning for complex, agile manipulation behaviors with suction and finger-based grippers Reinforcement learning to improve manipulation robustness and dealing with new situations AI systems (VLM, other) applied to various warehouse tasks, such as dealing with unexpected situations, dense packing, or error/damage detection. Gripper morphology optimization across large scale product data In this role you will: Perform applied research in robot learning to address real-world warehouse challenges Collaborate with other researchers and engineers to apply research findings to our robots Leverage production data and our internal development systems to implement and evaluate your solutions Qualifications Currently pursuing an advanced degree (MS or PhD) in Robotics, Machine Learning, Computer Science, or a closely related field. Strong software development expertise in Python; C++ is a plus Demonstrated proficiency with major deep learning frameworks such as PyTorch Experience with modern machine learning methods such as imitation learning, reinforcement learning, generative models, vision transformers, or related. Exposure to developing ML models for hardware interacting with the real world Experience developing in Linux (Ubuntu) and ROS COOP-2515TK