Mechanical design engineer jobs in Abilene, TX - 43 jobs

Kiewit is one of North America's largest and most respected construction and engineering organizations. With its roots dating back to 1884, the employee-owned organization operates through a network of subsidiaries in the United States, Canada, and Mexico. Kiewit offers construction and engineering services in a variety of markets including transportation; oil, gas and chemical; power; building; marine; water/wastewater; industrial; and mining. Kiewit had 2024 revenues of $16.8 billion and employs 31,800 staff and craft employees. Position Summary Assist skilled craft workers in performing their assigned duties. Performs tasks that require physical labor at construction sites must have the ability to perform a variety of duties. Experience Level Entry Primary Responsibilities and Duties * Assist craftsman in setting up work as required. * Follow instructions given by superintendents, foreman and other experienced crew. * Perform all required duties with the first focus on safety. * Responsible for keeping work areas clean and in orderly conditions. * Read and understand warning signs, operating instructions for equipment, jobsite safety rules and jobsite policies. * Learn to observe functioning of installed equipment or systems to determine hazards. Qualifications * May require a high school diploma or its equivalent with previous years of experience in the field or in a related area. * Must possess working knowledge skills and abilities for position. * Ability to understand, follow and transmit written and oral instructions and communicate effectively with management/supervision. * Ability to use hand tools, power tools and layout tools safe and efficiently. Requirements * The person in this position needs to constantly move about a construction/industrial site, so should be able to stand, walk, sit, reach, stoop, kneel, crouch, and/or crawl * Constantly works in a construction environment and will be exposed to changing outdoor weather conditions * Work irregular hours, weekends, overtime and holidays as required * May be required to use ladders/mechanical platforms/manlifts/scaffold to access required equipment/work areas (may exceed 200 feet), so must be able to climb and maintain balance on formwork, steel formwork, stairs, ladders and scaffolds * Move and work in and around confined and cluttered places, and uneven surfaces * Must be able to complete tasks in a noisy and dusty environment * May be required/able to move items weighing up to 50 pounds across construction/industrial site * May require U.S. Driver License * Observe and comply with all safety and project rules, perform other duties as required * Ability to pass pre-access drug and alcohol testing Equal Opportunity Employer, including disability and protected veteran status.

Onsite Mechanical Engineer - Liquid Cooling SME - Critical Facilities - Impact, TX This opportunity is working onsite at a HPC / Hyperscale Data Center Facility. This firm provides data center solutions custom-fit to the requirements of their client's mission-critical operational facilities. They provide reliability of mission-critical facilities for many of the world's largest organizations (Enterprise and Hyperscale Customers). This role offers exciting projects that incorporate cutting-edge liquid cooling, HVAC, and mechanical infrastructure technologies. Our client is seeking an Onsite Mechanical Engineer to act as a Subject Matter Expert / SME in liquid cooling at the rack level for Hyperscale client onsite at a the Customer's Data Center. They will provide onsite design, commissioning consulting and management expertise in Data Center / Mission Critical Facilities Space with the mindset to provide reliability, energy efficiency, and sustainable design when providing these consulting services. This career-growth minded opportunity offers leading-edge technology and innovation as well as competitive salaries and benefits. The ideal candidate will have past experience with Mechanical , HVAC and Controls Systems specifically for large data centers / Hyperscale. They will have experience and in-depth knowledge of HVAC / Mechanical / Controls System design, installation, commissioning and operations. This role will support ongoing facility operations, upgrades, and infrastructure deployments with a strong focus on HVAC, liquid cooling at Rack and Server, piping and other mechanical systems used in hyperscale / HPC data center environments. Responsibilities: Oversee projects, assist with design- plans, provide and gather specifications, and execute assignments in a multidisciplinary mechanical engineering design role for large sized data center facility design projects Serve as the mechanical subject matter expert onsite in meetings and throughout engineering, commissioning, and go live Assist with Conceptual Designs gathered from meetings with the client and translate to field-level execution Support data center operations with design upgrades, retrofits, and equipment assessments for mechanical and cooling systems Review mechanical design criteria, specifications, drawings, equipment submittals, and other documentation pertinent to engineering design and commissioning Work with Management to create / respond to RFPs Represent the company in: commissioning, design, construction and coordination meetings Participate in onsite commissioning efforts including HVAC systems, chilled water systems, CRAHs, cooling towers, and liquid cooling infrastructure Understand functional tests for various systems, such as: HVAC / Mechanical Systems, Controls, etc. Interface with clients, contractors, equipment vendors and owners agents and internal stakeholders as needed; Execute project assignments; Interface with project contractors, vendors, and testing technicians; Interact with all facets of the company: engineering, design, when requested Write comprehensive technical reports when needed which including system analysis, deficiency lists, and O&M documentation in addition to: recommendations for optimizing building operations, functional checklists, list of deficiencies, equipment operation and maintenance manuals Troubleshoot HVAC and cooling systems in the field; identify and resolve equipment performance issues Assist with quality control processes and mechanical system validation procedures Qualifications: 5-10 years of experience in Mechanical systems, HVAC, or liquid cooling infrastructure for critical facilities or data centers Bachelor's Degree in Mechanical Engineering or similar engineering degree a plus Licensed PE / EIT a Plus Experience with AutoCAD for minor tweaks for any design plans a plus Previous experience using: Revit MEP projects, BIM a plus Experience with Mechanical Systems ( HVAC , Liquid Cooling, Manifolds, Cooling Towers, CFD ( Fluid Dynamics), Boilers , Chillers , Pumps , CRAC / CRAH Units , Air Handling Units , etc. ) Familiarity with mechanical equipment testing, balancing, equipment sizing, calculations, and commissioning in high-uptime data center facilities Previous Data Center / Mission Critical experience a must Ability to successfully work independently Excellent communication skills, both written and verbal (this role requires heavy amount of writing, documentation, and client interaction) Self Starter, self motivated, and should prioritize well Previous experience in the Military / Military Veterans a huge plus! Experience with Electrical / Mechanical: Navy nukes - EMN, ETN, MMNs, Seabees, Army - Power Generation, Air Force - Power Production, Generator Techs, Maritime, Coast Guard, Army National Guard, etc. Submittal Instructions: Please apply directly by clicking the link below, alternatively you can forward your resume directly to: ************************************** After applying, if you have further questions, you may call ************ and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, *************************** If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Insight Global's top data client is seeking a Mechanical Engineer who will be responsible in reading and interpreting mechanical, plumbing, electrical and controls schematics and diagrams. Experience in bidding, designing, building, operating and commissioning of mechanical systems. This person will be responsible in mechanical construction and the processes required for a proper installation. Pay rate: $55-60/hr, dependent on experience We are a company committed to creating diverse and inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity/affirmative action employer that believes everyone matters. Qualified candidates will receive consideration for employment regardless of their race, color, ethnicity, religion, sex (including pregnancy), sexual orientation, gender identity and expression, marital status, national origin, ancestry, genetic factors, age, disability, protected veteran status, military or uniformed service member status, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to ********************.To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: **************************************************** Skills and Requirements 7-10 years' experience as a Mechanical Engineer Hyperscale data center or mission critical (gas & oil, power plant, etc.) experience Experience with mechanical systems: piping, sheet metal, cooling towers, ducts, chillers Construction background Bim 360 experience or similar software

This position will collaborate with team members to primarily design projects that support master-planned communities (such as single-family residential sections, commercial sites, utility extensions, mass grading, drainage/detention facilities or improvements, existing or proposed roadway improvements, etc.). Technical tasks include but not limited to utility design (primarily water, sanitary sewer, and storm sewer), roadway design, grading design, drainage design, plan production support, plan submittal/approval coordination, conceptual analyses/exhibits, cost estimations, and quantity take-offs. Accountability and Duties: Designs construction plans utilizing AutoCAD Civil 3D. Follows QA/QC procedures for design and plan production milestones. Monitors scopes, budgets, and schedules of assigned projects. Assists project managers and/or other project teams as requested. Requirements Requirements Minimum Qualifications Bachelor's degree in engineering from an accredited four-year college or university. 0-2 years related experience. Certificates, Licenses, Registrations: Valid driver's license EIT Certification (Preferred) Required Knowledge, Skills, and Abilities: Outstanding Interpersonal skills, ability to interact with a variety of people. Adaptable and able to respond quickly and accurately under pressure. Able to manage tasks/responsibilities in a fast-paced environment. Must be fluent in the English language. Available to work nights and weekends to complete projects as necessary. Proficient in MS office. AutoCAD Civil 3D and/or Bluebeam Revu experience is a plus. Physical Demands: Normal office environment Employer's Disclaimer: Position subject to possible modification to reasonably accommodate individuals with disabilities.

About Samsung Austin Semiconductor Samsung is a world leader in advanced semiconductor technology, founded on the belief that the pursuit of excellence creates a better world. At SAS, we are Innovating Today to Power the Devices of Tomorrow. Come innovate with us! Position Summary We are seeking an outstanding Engineer to join the Product Operations team to help start up one of the most advanced manufacturing facilities in US. This pivotal role serves as the internal command center that drives successful real-time operations & shipments by identifying critical paths for production, anticipating gaps, & driving results through cross team collaboration. With an eye towards efficiency & sustainability, the engineer drives initiatives that create or refine workflows, ensuring successful operations that adapt to changes in the evolving semiconductor industry. Role and Responsibilities Here's What You'll Be Responsible For: * Assume ownership of Logistic Equipment, or supply chain role depending on factory needs. * Coordinate preventive maintenance and software upgrades with third party vendors to keep tools consistently up to date and fully operational. * Diagnose & communicate tool related problems, coordinating with vendors and contractors as needed to restore operations after downtime. * Work with engineering, shift operation, and quality teams to identify tactical issues, resolve critical incidents, & author, implement, and maintain SOPs for each ownership domain. * Partner with systems technology and engineering teams to design & demonstrate the improvements to enhance equipment & factory flow. * Effectively communicate at all levels to champion lean manufacturing initiatives that enhance factory efficiency. * Develop & deploy new tools than refine existing processes & lead training to ensure seamless integration into standard workflows. Skills and Qualifications Here's what you'll need: * Bachelor's degree or equivalent in Engineering & Applied Mathematics. * 3+ years' experience in lean manufacturing, six sigma, factory operations, capacity planning, or project management. * Proficiency in Microsoft Office: Excel, PowerPoint, Word. * Experience with Equipment troubleshooting preferred. * Experience with Automated Manufacturing or Semiconductor FAB a plus. * Consistent track record of driving successful cross functional projects in a fast-paced environment with competing priorities. * Ability to anticipate problems, design preventative solution, & use persuasive communication to secure stakeholder buy-in. The current base salary range for this role is between $70,480 - $179,090. Individual base pay rates will depend on factors including duties, work location, education, skills, qualifications and experience. Total compensation for this position will include a competitive benefits package and may include participation in company incentive compensation programs, which are based on factors to include organizational and individual performance. Total Rewards At Samsung SAS, base pay is just one part of our total compensation package. The base compensation for this role will depend on education, experience, skills, and location. We offer a comprehensive benefits package, including: * Medical, dental, and vision insurance * Life insurance and 401(k) matching with immediate vesting * Onsite café(s) and workout facilities * Paid maternity and paternity leave * Paid time off (PTO) + 2 personal holidays and 10 regular holidays * Wellness incentives and MORE Eligible full-time employees (salaried or hourly) may also receive MBO bonuses based on company, division, and individual performance. All positions at SAS are full-time on-site. U.S. Export Control Compliance This role requires access to information subject to U.S. export control laws. Applicants must be authorized to access such information or eligible for government authorization. Trade Secrets Notice By submitting an application, you agree not to disclose to Samsung-or encourage Samsung to use-any confidential or proprietary information (including trade secrets) belonging to a current or former employer or other entity. * Please visit Samsung membership to see Privacy Policy, which defaults according to your location. You can change Country/Language at the bottom of the page. If you are European Economic Resident, please click here. * Samsung Electronics America, Inc. and its subsidiaries are committed to employing a diverse workforce, and provide Equal Employment Opportunity for all individuals regardless of race, color, religion, gender, age, national origin, marital status, sexual orientation, gender identity, status as a protected veteran, genetic information, status as a qualified individual with a disability, or any other characteristic protected by law.

DPR Construction is seeking a self-perform project engineer- drywall with at least 1 year of commercial construction experience for our self-perform work group. Project engineering will be on commercial projects within our core markets: healthcare, advanced technology, higher education, life sciences, and commercial, specifically for our self-perform services. The project engineer will work closely with all members of the project team and the self-perform work group, and will be responsible for the following: Working knowledge of contract with owner. Working knowledge of subcontracts with tiered trade contractors and material vendors. Prepare work scopes packages. Organize & maintain cost structure. Prepare, monitor and update scope(s) schedule. Help maintain weekly work plans and implementation of lean construction methods. Document schedule impacts to project. Identify changes in the project. Distribute change documents to all field personnel. Prepare estimates of DPR's change order work. Assemble, submit, and complete accurate change request in accordance with owner contact requirements. Expedite approval of change orders. Attend and document minutes at owner/architect meeting, subcontractor meeting, staff meeting and other meetings; follow through on action items. Attend and participate in bi-weekly self-perform team meeting, providing critical updates around project parameters. Participate in and apply DPR's environmental health and safety plan to constantly maintain injury-free environments. Assist foremen and field crews in the implementation of DPR policies and the execution of the project. Assist and organize the duties of the field staff. Provide direction, prioritization, performance feedback and coordination to ensure all job duties and project requirements are fulfilled. Complete 3 safety jobsite audits weekly. Financial Reports - Assist Project manager in: Updating pertinent project information relating to labor, productivity, and cash flow. Keep all cost, commitment and projection information current in the company job costing system. Preparing monthly progress reports by incorporating all new subcontract change amounts, material purchases costs to date and change orders. Preparing monthly fee and cost status reports. Prepare owner billing by assembling DPR costs, receiving and reviewing subcontractor/material invoices and organizing the documents in accordance with the owner's requirements. Prepare and monitor labor cost reports and job records including: Daily site walks and safety reporting. Evaluation of construction activities. Prepare and monitor equipment and material coding logs. Monitor safety inspection and accident logs and reports. Record official notices: warranties/guarantees. Maintain request for information log. Distribute new drawings, changes, approved submittals, RFI responses and other project information to all affected parties. Act as purchasing agent under lead foremen's and project manager's direction. Assist with scheduling and expediting material, equipment purchases and delivery. Identify and expedite long lead items. Schedule and expedite submittals of shop drawings, samples, and supplier data for timely approval. Schedule tiered subcontractor work and ensure subs are ready on schedule. Manage the shop drawings packages such as concrete forms and wall frame detailing. Participate and aide in job layout. Verify elevations and dimensions, providing adequate information for field crew completeness. Review all vendor shop drawings, product data, samples, manuals, etc. for all compliance with contact documents and coordination with all other items of work. Seek and study problems, conflicts, incomplete or ambiguous design information and any other questions/issues presented by subs, vendors, designers, DPR crews and staff or others. Resolve all promptly including, when necessary, interfacing with designers, engineers or the owner. Document solutions using RFI. Distribute to all affected parties. Qualifications We are looking for a flexible, detail-oriented team player with the ability to manage multiple tasks, produce quality work, and consistently meet deadlines. The successful candidate will possess: Excellent listening skills and strong communication skills. Ability to identify and resolve complex issues. Effective participation in team environment. Proficient computer skills in Microsoft Office Suite, project management software (CMiC or similar), and (not necessary but preferred) On Screen Take Off and Quick Bid. 1+ years of experience as a project engineer, preferably within DPR's core market projects. Bachelor's degree in construction management, engineering or related field. A strong work ethic and a “can-do” attitude. This position is salaried. DPR Construction is a forward-thinking, self-performing general contractor specializing in technically complex and sustainable projects for the advanced technology, life sciences, healthcare, higher education and commercial markets. Founded in 1990, DPR is a great story of entrepreneurial success as a private, employee-owned company that has grown into a multi-billion-dollar family of companies with offices around the world. Working at DPR, you'll have the chance to try new things, explore unique paths and shape your future. Here, we build opportunity together-by harnessing our talents, enabling curiosity and pursuing our collective ambition to make the best ideas happen. We are proud to be recognized as a great place to work by our talented teammates and leading news organizations like U.S. News and World Report, Forbes, Fast Company and Newsweek. Explore our open opportunities at ********************

Description Mechanical Project Engineer is a vital contributor to the success of our construction projects, serving as the technical backbone for planning, coordination, and execution. From reviewing drawings and managing RFIs to supporting submittals, procurement, and quality control, this role ensures every system is designed and delivered with precision. You'll work closely with Project Managers, Superintendents, and field teams to resolve technical challenges, coordinate with design teams, and keep projects aligned with schedule and budget. This role is ideal for an engineer who thrives in a fast-paced environment and is eager to apply both critical thinking and mechanical expertise in the field. Mechanical Project Engineers are valued for their problem-solving ability, communication skills, and attention to detail. Their work supports seamless collaboration between design and construction, helping bring complex systems to life safely, efficiently, and to the highest standard. Self.Made. at RKAt RK, Self. Made. isn't a tagline, it's how work gets done. People here build more than projects; they build capability, confidence, and careers they can be proud of. With so much work designed and fabricated in-house, ideas move quickly from concept to shop floor to job site. Teams collaborate across disciplines, solve real-world challenges, and grow through hands-on work that truly matters. RK Company OverviewRK Industries is a second-generation family-owned company led by brothers Rick and Jon Kinning. With seven specialized business units working together, we deliver construction, fabrication, manufacturing, and building services with a focus on safety, quality, and craftsmanship. People join RK for the craftsmanship, complexity, and the ability to make a real impact. Our in-house capabilities mean employees see their ideas become real solutions, creating meaningful collaboration and clear visibility into how work gets built. Growth happens through challenging projects, mentorship from experienced builders, and opportunities that stretch your skill set. With RK University, accredited apprenticeships, competitive benefits, and deep community investment, RK offers the stability of a family-owned company with the opportunity and momentum of an industry leader. Maintenance and administration functions necessary for successful completion of projects. Processing submittals, expediting deliveries, generating and tracking all administrative documentation and preparing project closeout records. Assist with preparation of budgets, billings and change estimates, buyout and negotiation of subcontractors, monitoring of labor hours and project costs, coordination with owners, architects, engineers, general contractors, subcontractors and suppliers. In-house coordination with field workforce, and estimating, purchasing and accounting departments, and processing accounts payable. Role Responsibilities Assist with and/or perform the following as delegated by the assigned Project Manager: Manage contractual agreements with owners, contractors, subcontractors, material suppliers, field staff, and within RKMI's management system. Ensure daily corporate documentation is completed and up to date, including time cards, daily reports, additional work authorizations, receiving documents, as-built drawings, etc. Negotiate terms, conditions, and scope of work for contractual agreements issued to RKMI in accordance with corporate policies and procedures, and estimate bid proposal. Prepare and distribute initial project budget. Coordinate and attend RKMI in-house pre-construction meetings. Ensure permits and/or licenses are obtained and current for project. Coordinate timely completion and thorough buy-out procedures on materials and equipment, in conjunction with the superintendent and purchasing department, with emphasis on maintaining all buy-outs under the established budget. Ensure superintendent's take-offs are complete, accurate and on time. Buy-out, negotiate and issue all lower-tier subcontract(s), with emphasis on complete scopes in compliance with the contract documents and within the established budget. Oversee and coordinate the project submittal approval process. Responsible for proper/timely processing of shop drawings, product submittals, operation and maintenance manuals, and recording all as-built drawings. Responsible for the administration of the signed subcontract requirements with respect to conformance with the agreement, contract documents, and change orders. Assist in the development, preparation, and finalization of RKMI's mechanical construction CPM schedule with input from superintendent(s). Coordinate ordering, processing, and delivery of materials and equipment with vendors and purchasing department. Coordinate communications and correspondences from owners, general contractors, and subcontractors. Review reports, including those prepared by local police, for completeness and accuracy, and forward to vice president of finance. Ensure project quality control procedures are followed during construction process, in accordance with the contract documents and RKMI's policies and procedures. Ensure that change orders requests (COR's) are processed in accordance with proper procedures, and that the superintendent has information required for implementation. Ensure change orders (CO's) are processed on time and are properly documented. Coordinate and track take-off orders, procurement and release of change orders items with the purchasing department and superintendent(s). Responsible for initiating, overseeing, and verifying billings. Verify that all materials invoiced and work billed has been delivered to and/or completed at job site. Review and monitor labor costs, hours, and projections with superintendent(s). Provide monthly and quarterly information to project manager, vice president of operations and vice president of finance, including but not limited to: forecasted estimate on costs required for completion of project, outstanding extra work total costs, and amount that has been performed but un-billed, encountered busts in the bid, and pending claims. Assist in legal claims as necessary. Responsible for job closeout being performed in proper and efficient manner and keeping the project manager and vice president of operation informed of closeout status. Monitor crafts compliance with company/project safety program requirements. Assist safety manager with preparation, documentation, and distribution of accident reports. Assist in resolution of conflicts with client, a/e liaison, etc. Optimize the profitability of the company by demonstrating the ability of a decision maker with reliable and mature judgment. Qualifications Indirect supervision. Fully competent in all conventional aspects of subject matter or functional area. Plans and conducts work requiring judgment in independent evaluation, selection and substantial adaptation/modification of standards. Devises new solutions to problems encountered. Independently performs most assignments with instruction Receives guidance for unusual or complex problems and supervisor approval for changes in standards. 3-5 years of experience in a related position. College/university graduate or equivalent combination of skills and experience generally expected for specified technical roles What Sets RK Industries Apart Safety: Our unmatched culture of safety is our foremost core value, guiding everything we do each day: Health, Safety, & Environmental Awards: Whether in Construction, Manufacturing, Fabrication, or Service, RK Industries is highly recognized and accredited throughout the industry: Accreditations & Recognition Benefits: RK Industries offers competitive benefits to support your growth and well-being: Benefits & Rewards Philanthropy: RK Industries not only builds our community through our projects, but also invests in it by supporting local services for over a decade through the RK Foundation: RK Foundation Development: Through RK University, we provide hands-on training and development opportunities that empower employees to advance their careers and grow within the company, to include leadership and technical learning opportunities, we well as our accredited apprentice program: RK University & RK Apprenticeship Program Applications are accepted on an ongoing basis RK Industries, LLC is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or any other status protected by applicable law

As a Project Engineer, you will join a project team tasked with the responsibility for all technical and engineering aspects of your project. You will lead daily coordination between our clients, trade partners, engineers, architects, and our employees. The Project Engineer is responsible for planning, scheduling, predicting, and managing all the technical tasks to assure accuracy, proper resources, and quality for the lifecycle of the project. **Responsibilities** + Collaborate with the Project Managers in purchasing activities including scoping and take-offs + Prepare and forward submittals; confirm submittal complies with plans/specs + Support the development and updating of the project schedule and subcontractor detail schedules + Play a lead role in the development of project plans + Monitor and expedite material deliveries ensuring all deliveries conform with the project schedule + Review change proposals from trade partners and negotiate as appropriate + Facilitate with the Project Manager and Superintendent in the coordination of drawings + Draft change orders. Solicit prices from subcontractors and suppliers. Perform scope take-off and estimate costs + Lead close out of project; includes assembling manuals and other warranties for turnover to owner and preparation final payment documents for subcontractors + Develop and lead training sessions for your team and trade partners + Take ownership of document management applications **Basic Qualifications** + Undergraduate or graduate degree in engineering, architecture, construction management, a related discipline or relevant work experience + 2+ years experience in an engineer, project engineer, or a similar role in the construction industry + Demonstrated knowledge of scheduling, cost engineering, subcontract coordination, and general project administration + Demonstrated ability reading drawings and specifications + Computer proficient including Microsoft Office and Google Workspace products. + Exceptional written and verbal communication skills + Interest and passion for building and the industry + Alignment to Clark Standards of Excellence: Self-Motivated, Results Oriented, Adaptable, Team Player, Accountable, Ethical, Innovative, Resilient, Builds Relationships **Preferred Qualifications** + OSHA 10 certification + Procore experience + Primavera P6 experience + Experience working for a general contractor Clark Construction Group is one of the largest building and infrastructure companies in the United States. Our portfolio spans every major building market, from public to private, corporate to cultural, education to entertainment, and the infrastructure connecting it all - power, transportation, water, and roadways. Since 1906, we've been delighting and delivering value to our clients and project partners, providing diverse opportunities for our team, and strengthening the communities where we live. With offices strategically located across the country, we pride ourselves on being a local builder with national reach. Learn more about Clark Construction (*********************************** . There is a sense of camaraderie that comes with delivering impactful projects as a team. It creates a sense of humility and fosters pride in the work we do. At Clark, we are proud to build what matters, together. Learn more about careers at Clark (****************************************** . Find even more opportunities with the Clark Group, our collection of companies - delivering construction and asset solutions for clients across the United States. Clark Group's capabilities span the entire asset lifecycle - from project development and financing to construction and facility maintenance. **_Asset Solutions_** **Altura Associates (********************************************* **Coda** **Edgemoor Infrastructure & Real Estate (************************************************ **S2N Technology Group** _Building & Infrastructure_ **Atkinson Construction (*********************************************** **Shirley Contracting Company** **C3M Power Systems (************************************************** **_Equal Opportunity Employer_** Clark Construction Group, LLC (and its subsidiaries and affiliates) is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, age, national origin, religion, physical and mental disability, genetic information, marital status, sexual orientation, gender identity, citizenship, pregnancy or maternity, protected veteran status, or any other status prohibited by applicable national, federal, state or local law. Clark promotes a drug-free workplace. Applicants have rights under Federal Employment Laws: Family and Medical Leave Act (FMLA), Equal Employment Opportunity (EEO), and Employee Polygraph Protection Act (EPPA). Clark is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please email ************************************ or call ************** and let us know the nature of your request and your contact information. **_Authorization to Work_** Applicants must be currently authorized to work in the US on a full-time basis in order to be considered. Equal Opportunity Employer: Clark Construction Group, LLC, (subsidiaries and affiliates) is an Equal Opportunity Employer committed to diversity and inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to sex, race, color, age, national origin, religion, physical and mental disability, genetic information, marital status, sexual orientation, gender identity/assignment, citizenship, pregnancy or maternity, protected veteran status, or any other status prohibited by applicable national, federal, state or local law. Clark Construction promotes a drug-free workplace.

Project Engineer - Civil, Industrial & Commercial Concrete 🏢 Company: Gregory Construction Gregory Construction, a Christian-principled, award-winning contractor, is seeking a Project Engineer to support civil, industrial, and commercial concrete projects across the Southeast. This role is essential in assisting project leadership to ensure work is executed safely, on time, within budget, and to Gregory's high standards of quality and integrity. Key Responsibilities: Provide engineering support to Superintendents and Project Managers in daily field operations. Review drawings, RFIs, and project documents to support accurate execution. Assist with purchase order requisitions, material tracking, and delivery coordination. Maintain project documentation, including daily reports, records, and files. Attend and contribute to project progress meetings. Monitor project schedules, costs, and resources to ensure deadlines and budgets are met. Support in maintaining safety, quality, and compliance standards on all project sites. Perform additional tasks as assigned to support project success. Qualifications: Bachelor's degree in Civil Engineering, Construction Management, or a related field. Foundational knowledge of construction specifications, methods, and procedures. Ability to apply engineering principles to solve construction challenges. Strong organizational and communication skills. Previous construction internship, co-op, or field experience is a plus. Willingness to travel as needed for project assignments. Why Gregory Construction: Competitive pay, PTO, and company-paid health/dental/vision/life insurance. 401(k) with company match. Opportunities for mentorship, training, and career growth. Supportive, faith-based culture built on Safety, Integrity, Excellence, Communication, and Determination. Apply today to join Gregory Construction as a Project Engineer and grow your career with a respected leader in civil, industrial, and commercial construction.

Providence caregivers are not simply valued - they're invaluable. Join our team at Enterprise Information Services and thrive in our culture of patient-focused, whole-person care built on understanding, commitment, and mutual respect. Your voice matters here, because we know that to inspire and retain the best people, we must empower them. We are seeking a visionary Principal Service Engineer to join our IS Asset and Supply Chain Management team, driving innovation in IT service delivery at scale. In this role, you will leverage ServiceNow to ensure data integrity, streamline workflows, and optimize hardware fulfillment processes -including IT asset disposition (ITAD), imaging, and project-based orders. You'll collaborate with 3rd Party Logistics Partners, End User Support, and internal ServiceNow and Oracle teams to deliver seamless IS equipment services to caregivers. As a technical leader, you will design and implement service architectures, establish best practices, and champion automation to enhance compliance, resilience, and cost efficiency. With a focus on continuous improvement and AI-driven user experiences, you will mentor peers, influence strategic decisions, and act as a thought leader in adopting emerging technologies-all while ensuring exceptional caregiver experiences and measurable improvements in KPIs. Providence supports 100% virtual work for residents located in the following areas: + Alaska + Washington + Oregon + Montana + California + Texas Required Qualifications: + Bachelor's Degree - Supply Chain, Computer Engineering, Computer Science, Mathematics, Engineering -OR- a combination of equivalent education and experience + 8 years Related experience; more preferred. + Strong experience in automation, specifically related to deployment, recovery, or other manual processes. + Strong experience with n-tier solutions. + Strong experience with resilience modeling (failure mode analysis) and ability to simulate service outages for point solutions (automated) and platforms (manually). + Strong experience influencing engineering team members in translating customer and technical requirements into service architecture to meet Quality of Service Expectations. + Strong experience leading and representing the Service in backlog discussions and standups to establish appropriate prioritization of Live Site requirements. + Strong experience leveraging data and metrics to drive behavior, process, and priority decisions. Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems. + Strong experience in advanced problem solving using systematic procedures and investigating problems utilizing root cause analysis. Preferred Qualifications: + Master's Degree - Supply Chain, Computer Engineering, Computer Science, Mathematics, Engineering -OR- a combination of equivalent education and experience + Experience in a Healthcare environment + PMP Certification + Agile development experience + 8 or more years of experience leading service engineering initiatives across complex, global supply chain environments, driving operational excellence system reliability, and cross-functional collaboration to deliver scalable, high-impact solutions + 5 or more years of experience working directly in ServiceNow + Lead end-to-end design and implementation of scalable service engineering solutions for global supply chain systems + Develop and optimize automation frameworks to improve supply chain reliability, uptime, and performance. + Strong proficiency in scripting (e.g., Power Automate) to support diagnostics, monitoring, and automation + Drive continuous improvement initiatives across procurement and order fulfillment + Collaborate with vendors and third-party logistics providers to ensure seamless integration and service delivery + Implement KPIs and dashboards to monitor service health and supply chain performance in real time + Lead feedback reviews and implement corrective actions to prevent recurrence Salary Range by Location: + AK: Anchorage: Min: $68.33, Max: $116.36 + AK: Kodiak, Seward, Valdez: Min: $71.23, Max: $121.29 + California: Humboldt: Min: $71.23, Max: $121.29 + California: Northern California - Except Humboldt: Min: $79.92, Max: $136.08 + California: Southern California: Min: $71.23, Max: $121.29 + Montana: Except Great Falls: Min: $55.01, Max: $93.68 + Montana: Great Falls: Min: $52.12, Max: $88.75 + Oregon: Non-Portland Service Area: Min: $63.70, Max: $108.47 + Oregon: Portland Service Area: Min: $68.33, Max: $116.36 + Texas: Min: Min: $52.12, Max: $88.75 + Washington: Western: Min: $71.23, Max: $121.29 + Washington: Southwest - Olympia, Centralia: Min: $68.33, Max: $116.36 + Washington: Clark County: Min: $68.33, Max: $116.36 + Washington: Eastern: Min: $60.81, Max: $103.54 + Washington: Southeastern: Min: $63.70, Max: $108.47 Why Join Providence? Our best-in-class benefits are uniquely designed to support you and your family in staying well, growing professionally, and achieving financial security. We take care of you, so you can focus on delivering our Mission of caring for everyone, especially the most vulnerable in our communities. About Providence At Providence, our strength lies in Our Promise of "Know me, care for me, ease my way." Working at our family of organizations means that regardless of your role, we'll walk alongside you in your career, supporting you so you can support others. We provide best-in-class benefits and we foster an inclusive workplace where diversity is valued, and everyone is essential, heard and respected. Together, our 120,000 caregivers (all employees) serve in over 50 hospitals, over 1,000 clinics and a full range of health and social services across Alaska, California, Montana, New Mexico, Oregon, Texas and Washington. As a comprehensive health care organization, we are serving more people, advancing best practices and continuing our more than 100-year tradition of serving the poor and vulnerable. Posted are the minimum and the maximum wage rates on the wage range for this position. The successful candidate's placement on the wage range for this position will be determined based upon relevant job experience and other applicable factors. These amounts are the base pay range; additional compensation may be available for this role, such as shift differentials, standby/on-call, overtime, premiums, extra shift incentives, or bonus opportunities. Providence offers a comprehensive benefits package including a retirement 401(k) Savings Plan with employer matching, health care benefits (medical, dental, vision), life insurance, disability insurance, time off benefits (paid parental leave, vacations, holidays, health issues), voluntary benefits, well-being resources and much more. Learn more at providence.jobs/benefits. Applicants in the Unincorporated County of Los Angeles: Qualified applications with arrest or conviction records will be considered for employment in accordance with the Unincorporated Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. About the Team Providence Shared Services is a service line within Providence that provides a variety of functional and system support services for our family of organizations across Alaska, California, Montana, New Mexico, Oregon, Texas and Washington. We are focused on supporting our Mission by delivering a robust foundation of services and sharing of specialized expertise. Providence is proud to be an Equal Opportunity Employer. We are committed to the principle that every workforce member has the right to work in surroundings that are free from all forms of unlawful discrimination and harassment on the basis of race, color, gender, disability, veteran, military status, religion, age, creed, national origin, sexual identity or expression, sexual orientation, marital status, genetic information, or any other basis prohibited by local, state, or federal law. We believe diversity makes us stronger, so we are dedicated to shaping an inclusive workforce, learning from each other, and creating equal opportunities for advancement. Requsition ID: 403936 Company: Providence Jobs Job Category: Development/Engineering Job Function: Information Technology Job Schedule: Full time Job Shift: Day Career Track: Business Professional Department: 4011 SS IS ESI CLOUD HOSTING Address: WA Renton 1801 Lind Ave SW Work Location: Providence Valley Office Park-Renton Workplace Type: Remote Pay Range: $See Job Posting - $See Job Posting The amounts listed are the base pay range; additional compensation may be available for this role, such as shift differentials, standby/on-call, overtime, premiums, extra shift incentives, or bonus opportunities.

TW Constructors (TWC) Full Time Haskell, TX About Us: TW Constructors has been a leader in design/build construction, interior renovations, and construction management in the St. Louis market for over 20 years. Recognized as the Largest Minority Owned Business Enterprise in the area, our team is committed to excellence throughout the construction process. Founded on principles of collaboration and success, we focus on supporting our clients' objectives for project longevity, sustainability, and community impact. Our extensive network of personnel, subcontractors, and vendors ensures every detail is considered from project conception to completion, including budgeting, scheduling, and construction. At TW Constructors, we build more than facilities, we build community support and success. The Role: The Project Engineer will be based on the construction project site, and may even travel to sites across the country. The Project Engineer will provide support to the project staff to ensure quality and timely execution of design/build, self-perform projects from design to completion. These phases include: Scheduling, bidding, permitting, subcontractor buyout, cost reporting, preparation of subcontracts, the handling of owner coordination, construction quality oversight, and project closeout. Travel or relocation will be required. Responsibilities: Effectively influence, negotiate, and communicate with owners, architects, engineers, subcontractors, suppliers and co-workers Actively contribute to the project schedule and close-out process Assist Superintendent in the management of subcontractors. Monitor project labor, project costs, and equipment needs Participate in the design development process to collaborate and value engineer construction methods to reduce time and cost Assist in the preconstruction, quality, and safety processes Establish and maintain project schedules and budgets, responsible for overall project delivery Ensure contractor compliance of safety/OSHA requirements are met on all job sites to minimize risk Manage submittal process, change order negotiations and contract compliance Establish effective relationships and strive for a collaborative team environment Provide pricing for changes in project scope Our projects are nationwide - Travel or relocation will be required Qualifications: Bachelor's Degree in Construction Management, Engineering, or related field of study 1-5 years of experience in commercial project management Successful internships or project engineering experience is a plus Design-Build experience is ideal Active jobsite experience and strong safety record Ability to interpret blueprints, specifications, inspection reports, etc. Significant knowledge of construction methods as well as an understanding of municipalities and the permit processes Ability to manage subcontractors and vendors Proven ability to negotiate and track change orders, submittals, RFI's, and pay requests Ability to manage multiple projects and tasks at a time Proven ability to direct Superintendent to ensure accurate completion of project scope Documented ability to meet sensitive timelines Strong knowledge of Building Code and Safety Regulations Strong knowledge of MS Office suite including MS Excel, and MS Project or other Project Management software Procore Certified or knowledge and skill in Procore Ability to walk the job site, climb ladders, and multi floor scaffolding. Ability to lift objects at least 50lbs. We are a drug free work place, must be able to pass pre and random drug tests Self-motivated and able to lead and motivate team members Thoughtful and confident decision making skills with high ethical standards Good verbal and written communication skills Good interpersonal skills and a high level of professionalism Problem solving skills and the ability to think and react quickly under pressure Service-oriented approach in working with owners, co-workers, and any joint venture partners Strong attention to detail and high level of organization Reliable, dependable and professional with a strong sense of urgency Why People Choose TW Constructors TW Constructors is committed to creating an inclusive, supportive, and safe workplace where people feel connected, valued, and able to reach their full potential. We partner with individuals who share our dedication to diversity and a welcoming environment where everyone can see themselves represented at every level of the company. We are proud to serve the communities where we work and continue to grow as one of the fastest-expanding construction firms in the nation. If you are ready to take the next step in your career, we invite you to join the TW Constructors team. Why Build Your Future With TW Constructors Career Growth We believe in promoting from within and supporting long-term development. Comprehensive Benefits 100% Employer-Paid Health Plans for employees Employer-Provided Dental and Vision Plans Employer-Sponsored Health Reimbursement Arrangement (HRA) 401(k) Retirement Plan with Company Match Employer-Provided Basic Life Insurance (up to $200,000) Employer-Provided Long-Term Disability (LTD) Insurance Additional Benefits available for employees and their families Headquarters Perks In-office gym Personal training sessions Yoga classes Massage therapist Game room Company Culture Fun, energetic, and people-centered Strong focus on work-life balance and safety Team activities and employee engagement Support for both physical and mental wellness Our Impact and Recognition Fastest-growing contractor in St. Louis Largest MBE construction firm in St. Louis Ranked #34 Top Data Center Construction Firms (BD+C) Ranked #74 Top Healthcare Construction Firms (BD+C) Known for high-profile, complex, award-winning, mission-critical projects Job sites and opportunities nationwide across TWC and its affiliates Join our fast-growing team and be part of a supportive, collaborative environment. Apply directly with confidence. Your application will remain completely confidential. TW Constructors is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. TW Constructors is a background screening, drug-free workplace. Both of these requirements will be partial determination of final result in hiring. TW Constructors does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of TW Constructors without a prior written search agreement will be considered unsolicited and the property of TW Constructors. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

The Project Engineer has responsibility for coordination of technical activities on assigned projects. Plans, schedules, conducts, and coordinates in conjunction with the Project Manager; monitors work for quality assurance and quality control, accepted engineering practices and standards, ensures effective communication and coordination on assigned project between all disciplines and all other project assignments. The Project Manager may delegate certain project management responsibilities to the Project Engineer, including day-to-day interaction with the Client's designated representative as well as coordination of all internal activities performed by Haydon's staff. Per diem and Housing included. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Submittal & Shop Drawing Reviews Project Controls including Document Control, RFI's, and Schedule Updates Daily Subcontractor Management Quantity Tracking & Verification including performing work Takeoffs Quality Assurance/Quality Control Requires extensive regular contact with assigned Haydon crews and/or subcontractors Participating in Owner and Subcontractor meetings COMPETENCIES To perform the job successfully, an individual should demonstrate the following competencies: Analytical - Synthesizes complex or diverse information; collects and researches data; uses intuition and experience to complement data; designs workflows and procedures. Planning/Organizing - Prioritizes and plans work activities; uses time efficiently; plans for additional resources; sets goals and objectives; organizes or schedules other people and their tasks; develops realistic action plans. Communications - Strong problem solving, risk management, organization, and communication skills. Expresses ideas and thoughts verbally; expresses ideas and thoughts in written form; exhibits good listening and comprehension; keeps others adequately informed; selects and uses appropriate communication methods. Job Knowledge - Competent in required job skills and knowledge; exhibits ability to learn and apply new skills; keeps abreast of current developments; requires minimal supervision; displays understanding of how job relates to others; uses resources effectively. Quantity - Meets productivity standards; completes work in timely manner; strives to increase productivity; works quickly. Quality Management - Looks for ways to improve and promote quality; demonstrates accuracy and thoroughness. QUALIFICATIONS The requirements listed below are representative of the knowledge, skill, and/or ability required. Education and/or Experience Bachelor's degree in Construction Management, Engineering; 0-3 years experience in heavy civil and related functions plus thorough knowledge of civil construction industry; or equivalent combination of education and experience considered. Excellent skills in P6 scheduling software and excellent computer skills Microsoft Office, Bluebeam, On Center OST, and MS Project. High energy level and the ability to inspire and motivate a team. Understands and abides by all government processes and regulations. Physical Demands While performing the duties of this Job, the employee is regularly required to use hands to type, handle, or feel and talk or hear. The employee is frequently required to stand; walk and sit. The employee is occasionally required to reach with hands and arms and stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds.

Job Description Onsite Mechanical Engineer - Liquid Cooling SME - Critical Facilities - Impact, TX This opportunity is working onsite at a HPC / Hyperscale Data Center Facility. This firm provides data center solutions custom-fit to the requirements of their client's mission-critical operational facilities. They provide reliability of mission-critical facilities for many of the world's largest organizations (Enterprise and Hyperscale Customers). This role offers exciting projects that incorporate cutting-edge liquid cooling, HVAC, and mechanical infrastructure technologies. Our client is seeking an Onsite Mechanical Engineer to act as a Subject Matter Expert / SME in liquid cooling at the rack level for Hyperscale client onsite at a the Customer's Data Center. They will provide onsite design, commissioning consulting and management expertise in Data Center / Mission Critical Facilities Space with the mindset to provide reliability, energy efficiency, and sustainable design when providing these consulting services. This career-growth minded opportunity offers leading-edge technology and innovation as well as competitive salaries and benefits. The ideal candidate will have past experience with Mechanical , HVAC and Controls Systems specifically for large data centers / Hyperscale. They will have experience and in-depth knowledge of HVAC / Mechanical / Controls System design, installation, commissioning and operations. This role will support ongoing facility operations, upgrades, and infrastructure deployments with a strong focus on HVAC, liquid cooling at Rack and Server, piping and other mechanical systems used in hyperscale / HPC data center environments. Responsibilities: Oversee projects, assist with design- plans, provide and gather specifications, and execute assignments in a multidisciplinary mechanical engineering design role for large sized data center facility design projects Serve as the mechanical subject matter expert onsite in meetings and throughout engineering, commissioning, and go live Assist with Conceptual Designs gathered from meetings with the client and translate to field-level execution Support data center operations with design upgrades, retrofits, and equipment assessments for mechanical and cooling systems Review mechanical design criteria, specifications, drawings, equipment submittals, and other documentation pertinent to engineering design and commissioning Work with Management to create / respond to RFPs Represent the company in: commissioning, design, construction and coordination meetings Participate in onsite commissioning efforts including HVAC systems, chilled water systems, CRAHs, cooling towers, and liquid cooling infrastructure Understand functional tests for various systems, such as: HVAC / Mechanical Systems, Controls, etc. Interface with clients, contractors, equipment vendors and owners agents and internal stakeholders as needed; Execute project assignments; Interface with project contractors, vendors, and testing technicians; Interact with all facets of the company: engineering, design, when requested Write comprehensive technical reports when needed which including system analysis, deficiency lists, and O&M documentation in addition to: recommendations for optimizing building operations, functional checklists, list of deficiencies, equipment operation and maintenance manuals Troubleshoot HVAC and cooling systems in the field; identify and resolve equipment performance issues Assist with quality control processes and mechanical system validation procedures Qualifications: 5-10 years of experience in Mechanical systems, HVAC, or liquid cooling infrastructure for critical facilities or data centers Bachelor's Degree in Mechanical Engineering or similar engineering degree a plus Licensed PE / EIT a Plus Experience with AutoCAD for minor tweaks for any design plans a plus Previous experience using: Revit MEP projects, BIM a plus Experience with Mechanical Systems ( HVAC , Liquid Cooling, Manifolds, Cooling Towers, CFD ( Fluid Dynamics), Boilers , Chillers , Pumps , CRAC / CRAH Units , Air Handling Units , etc. ) Familiarity with mechanical equipment testing, balancing, equipment sizing, calculations, and commissioning in high-uptime data center facilities Previous Data Center / Mission Critical experience a must Ability to successfully work independently Excellent communication skills, both written and verbal (this role requires heavy amount of writing, documentation, and client interaction) Self Starter, self motivated, and should prioritize well Previous experience in the Military / Military Veterans a huge plus! Experience with Electrical / Mechanical: Navy nukes - EMN, ETN, MMNs, Seabees, Army - Power Generation, Air Force - Power Production, Generator Techs, Maritime, Coast Guard, Army National Guard, etc. Submittal Instructions: Please apply directly by clicking the link below, alternatively you can forward your resume directly to: ************************************** After applying, if you have further questions, you may call ************ and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, *************************** If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Kiewit is one of North America's largest and most respected construction and engineering organizations. With its roots dating back to 1884, the employee-owned organization operates through a network of subsidiaries in the United States, Canada, and Mexico. Kiewit offers construction and engineering services in a variety of markets including transportation; oil, gas and chemical; power; building; marine; water/wastewater; industrial; and mining. Kiewit had 2024 revenues of $16.8 billion and employs 31,800 staff and craft employees Position Summary Kiewit South Central is looking for a Mixer Truck Driver for the Grindstone Project local in Santo, TX. This is not an over-the-road position rather is a site based mining haul truck position. Requirements * Valid Class A or B License (CDL). * 1 year of driving experience. * 6 months of mixer truck experience. Shift Information * Shift schedules depend on business requirements (employees are limited to working a maximum of 14 hours per shift). * Must be available to work night shifts. * Additional overtime and weekends may be required. Additional Information * Pay Rate: up to $25 per hour. * Must have a valid DOT medical card. * All offers are contingent on your ability to pass a Drug and Alcohol test. * Maybe required to complete orinetation in Santo, TX. Work Environment * The person in this position needs to constantly move about a construction/industrial site, so should be able to stand, walk, sit, reach, stoop, kneel, crouch, and/or crawl * Constantly works in a construction environment and will be exposed to changing outdoor weather conditions * Work irregular hours, weekends, overtime and holidays as required * May be required to use ladders/mechanical platforms/manlifts/scaffold to access required equipment/work areas (may exceed 200 feet), so must be able to climb and maintain balance on formwork, steel formwork, stairs, ladders and scaffolds * Move and work in and around confined and cluttered places, and uneven surfaces * Must be able to complete tasks in a noisy and dusty environment * May be required/able to move items weighing up to 50 pounds across construction/industrial site * Must have required tools * Licenses (Class A or B - CDL) * Observe and comply with all safety and project rules, perform other duties as required * Ability to pass pre-access drug and alcohol testing About Kiewit As one of North America's largest and most respected construction and engineering organizations, Kiewit provides opportunities to make a positive impact in communities across North America in a variety of markets including transportation, water/wastewater, power, oil, gas and chemical, building and mining. Whether you're a carpenter planning forms for a concrete pour, a rigger prepping the proper components for complex crane lift, or a laborer working hard to help your team get the job done on time, Kiewit's skilled craft employees strive to be the best. From Day One on the job, we'll give you meaningful responsibility and the opportunity to prove yourself. With access to industry-leading training and development, Kiewit craft employees are in full control of their careers. For more information on our current projects/job openings, or to apply online visit our website at: *********************** Equal Opportunity Employer, including disability and protected veteran status.

About Samsung Austin Semiconductor Samsung is a world leader in advanced semiconductor technology, founded on the belief that the pursuit of excellence creates a better world. At SAS, we are Innovating Today to Power the Devices of Tomorrow. Come innovate with us! Position Summary In your role as an Instrumentation and Control Design Engineer you'll be responsible for instrumentation design, control system engineering, and industrial networking, working with Siemens FMCS Platforms. Role and Responsibilities Here's What You'll Be Responsible For: * Interpret and enforce Samsung design standards, specifications, and performance criteria. * Ensure EOR and contractor adhere to functional requirements. * Confirm that EOR I&C design is complete, technically correct, and aligns with owner expectations. * Act as the main technical liaison between the owner and the EOR for all I&C design matter. * Ensure I&C design aligns with applicable codes e.g IEC, ISA, NFPA, NEC and local regulator requirements. * Provide expert inputs during HAZOP, LOPA, SIL assessment, and ensure proper implementation. * Evaluate proposed design changes, identifying potential impact on functionality, safety and cost. Skills and Qualifications Here's what you'll need: * 6 to 8 years of experience in instrumentation and control design engineering. * Bachelor degree in Electrical Engineering, Electronic engineering or related fields. * Expertise with industry standards and codes (ISA, IEC, NES, NFPA). * Proven I&C design skills. Instrumentation selection, PLC systems and industrial network architecture * Software experience with CAD, Navisworks, Revit. Siemens TIA portal and DCS platform. * PE, PMP, ISA CCS are advantageous. The current base salary range for this role is between $70,480 - $179,090. Individual base pay rates will depend on factors including duties, work location, education, skills, qualifications and experience. Total compensation for this position will include a competitive benefits package and may include participation in company incentive compensation programs, which are based on factors to include organizational and individual performance. Total Rewards At Samsung SAS, base pay is just one part of our total compensation package. The base compensation for this role will depend on education, experience, skills, and location. We offer a comprehensive benefits package, including: * Medical, dental, and vision insurance * Life insurance and 401(k) matching with immediate vesting * Onsite café(s) and workout facilities * Paid maternity and paternity leave * Paid time off (PTO) + 2 personal holidays and 10 regular holidays * Wellness incentives and MORE Eligible full-time employees (salaried or hourly) may also receive MBO bonuses based on company, division, and individual performance. All positions at SAS are full-time on-site. U.S. Export Control Compliance This role requires access to information subject to U.S. export control laws. Applicants must be authorized to access such information or eligible for government authorization. Trade Secrets Notice By submitting an application, you agree not to disclose to Samsung-or encourage Samsung to use-any confidential or proprietary information (including trade secrets) belonging to a current or former employer or other entity. * Please visit Samsung membership to see Privacy Policy, which defaults according to your location. You can change Country/Language at the bottom of the page. If you are European Economic Resident, please click here. * Samsung Electronics America, Inc. and its subsidiaries are committed to employing a diverse workforce, and provide Equal Employment Opportunity for all individuals regardless of race, color, religion, gender, age, national origin, marital status, sexual orientation, gender identity, status as a protected veteran, genetic information, status as a qualified individual with a disability, or any other characteristic protected by law.

DPR Construction is seeking a senior project engineer with a minimum of 5 years of commercial construction experience. Project engineer responsibilities will be on commercial projects within our core markets: advanced technology, commercial, healthcare, higher education and life sciences. Project engineers will work closely with all members of the project team and will be responsible for the following: Participation and application of DPR's environmental health and safety plan to constantly maintain injury-free environments including performing weekly safety audits. Mentor, develop and train team members for fast-paced growth. Management of other project engineer team members. Understanding and enforcement of contracts, including between DPR and subcontractors as well as DPR and the owner. Assist superintendent and project manager in the implementation of DPR policies and the execution of the project. Organizing the duties of other engineers, field office coordinator, project accountant and other assigned project staff. This includes providing direction, prioritization, and performance feedback. Participation in trainings and company meetings to facilitate individual and company growth. Organizing and electronically archiving project files for easy access by the project team. Preparation, monitoring, and updating project schedules. Working with the superintendent to impact the schedule with project constraints. Preparation, maintenance, and implementation of various document control entities such as daily reports, material procurement logs, submittal logs, as-builts, testing and inspection logs, RFI logs, and change order logs. Distribution of new drawings, changes, approved submittals, RFI responses, and other project information to all affected parties. Identifying, assembling, negotiating, and distributing change orders to both the owner and subcontractors. Preparing agendas, documents, meeting minutes, and actions for various meetings including owner/architect/contractor meetings, subcontractor coordination meetings, safety meetings, and staff meetings. Participating in project cost control. This includes maintaining internal records and working with subcontractors to make sure changes are getting paid. Preparing owner billing by assembling DPR costs, receiving and reviewing subcontractor invoices and organizing the documents in accordance with the owner's requirements. Qualifications We are looking for a flexible, detail-oriented team player with the ability to manage multiple tasks, produce quality work, and consistently meet deadlines. The successful candidate will possess: Organized work approach with the ability to adapt and adjust as required to support the projects' current needs. Detailed knowledge of the assigned project scopes with a 100% hands-on approach. A desire to seek out and resolve construction problems/conflicts that arise during design and construction phases. Goal-orientated approach to promptly coordinate and resolve project issues within the project team (including interfacing with designers, engineers, and owners). Excellent listening and strong communication skills. Ability to identify and resolve complex issues. Effective participation in team environment. Proficient computer skills in Microsoft Office Suite, project management software (CMiC, Prolog or similar), scheduling software (Primavera or similar) and BIM software (AutoCAD, Revit, Navisworks or similar). 5+ years of experience as a project engineer, preferably within DPR's core markets. Bachelor's degree in construction management, civil engineering or related field. A strong work ethic, a “can-do” attitude and a passion for construction. This position is salaried. DPR Construction is a forward-thinking, self-performing general contractor specializing in technically complex and sustainable projects for the advanced technology, life sciences, healthcare, higher education and commercial markets. Founded in 1990, DPR is a great story of entrepreneurial success as a private, employee-owned company that has grown into a multi-billion-dollar family of companies with offices around the world. Working at DPR, you'll have the chance to try new things, explore unique paths and shape your future. Here, we build opportunity together-by harnessing our talents, enabling curiosity and pursuing our collective ambition to make the best ideas happen. We are proud to be recognized as a great place to work by our talented teammates and leading news organizations like U.S. News and World Report, Forbes, Fast Company and Newsweek. Explore our open opportunities at ********************

As a Project Engineer, you will join a project team tasked with the responsibility for all technical and engineering aspects of your project. You will lead daily coordination between our clients, trade partners, engineers, architects, and our employees. The Project Engineer is responsible for planning, scheduling, predicting, and managing all the technical tasks to assure accuracy, proper resources, and quality for the lifecycle of the project. Responsibilities Collaborate with the Project Managers in purchasing activities including scoping and take-offs Prepare and forward submittals; confirm submittal complies with plans/specs Support the development and updating of the project schedule and subcontractor detail schedules Play a lead role in the development of project plans Monitor and expedite material deliveries ensuring all deliveries conform with the project schedule Review change proposals from trade partners and negotiate as appropriate Facilitate with the Project Manager and Superintendent in the coordination of drawings Draft change orders. Solicit prices from subcontractors and suppliers. Perform scope take-off and estimate costs Lead close out of project; includes assembling manuals and other warranties for turnover to owner and preparation final payment documents for subcontractors Develop and lead training sessions for your team and trade partners Take ownership of document management applications Basic Qualifications Undergraduate or graduate degree in engineering, architecture, construction management, a related discipline or relevant work experience 2+ years experience in an engineer, project engineer, or a similar role in the construction industry Demonstrated knowledge of scheduling, cost engineering, subcontract coordination, and general project administration Demonstrated ability reading drawings and specifications Computer proficient including Microsoft Office and Google Workspace products. Exceptional written and verbal communication skills Interest and passion for building and the industry Alignment to Clark Standards of Excellence: Self-Motivated, Results Oriented, Adaptable, Team Player, Accountable, Ethical, Innovative, Resilient, Builds Relationships Preferred Qualifications OSHA 10 certification Procore experience Primavera P6 experience Experience working for a general contractor

Job DescriptionProject Engineer - Civil, Industrial & Commercial Concrete 🏢 Company: Gregory Construction Gregory Construction, a Christian-principled, award-winning contractor, is seeking a Project Engineer to support civil, industrial, and commercial concrete projects across the Southeast. This role is essential in assisting project leadership to ensure work is executed safely, on time, within budget, and to Gregory's high standards of quality and integrity. Key Responsibilities: Provide engineering support to Superintendents and Project Managers in daily field operations. Review drawings, RFIs, and project documents to support accurate execution. Assist with purchase order requisitions, material tracking, and delivery coordination. Maintain project documentation, including daily reports, records, and files. Attend and contribute to project progress meetings. Monitor project schedules, costs, and resources to ensure deadlines and budgets are met. Support in maintaining safety, quality, and compliance standards on all project sites. Perform additional tasks as assigned to support project success. Qualifications: Bachelor's degree in Civil Engineering, Construction Management, or a related field. Foundational knowledge of construction specifications, methods, and procedures. Ability to apply engineering principles to solve construction challenges. Strong organizational and communication skills. Previous construction internship, co-op, or field experience is a plus. Willingness to travel as needed for project assignments. Why Gregory Construction: Competitive pay, PTO, and company-paid health/dental/vision/life insurance. 401(k) with company match. Opportunities for mentorship, training, and career growth. Supportive, faith-based culture built on Safety, Integrity, Excellence, Communication, and Determination. Apply today to join Gregory Construction as a Project Engineer and grow your career with a respected leader in civil, industrial, and commercial construction. Powered by JazzHR mi7xCqLY8V

About Samsung Austin Semiconductor Samsung is a world leader in advanced semiconductor technology, founded on the belief that the pursuit of excellence creates a better world. At SAS, we are Innovating Today to Power the Devices of Tomorrow. Come innovate with us! Position Summary As a Mechanical Systems Project Manager for Samsung, you'll be responsible for code compliance, safety, and system performance for new construction, remodel construction, and sustaining operation of our existing facilities. Role and Responsibilities * Oversee and coordinate on-site construction activities to ensure adherence to project specs, schedules and safety standards. Project planning for mechanical systems related to new and retrofit construction, a strong focus on system knowledge, equipment installation, handover plan, and project closeout. * Managing construction general contractor activities related to new and retrofit construction. * Monitoring field installations for large engineering design and construction projects ensuring safety, quality, schedule and cost adherence. * Ensure code compliance with mechanical standards, building codes, plumbing codes, and environmental regulations throughout the construction life cycle. Ensure System performance for new construction, remodel construction, and sustaining operation evaluation of existing facilities. * Identifying, tracking, managing, resolving, and communicating project issues during all phases of project-related work * Leading strategic fab and support project planning for mechanical systems relate to new and retrofit construction. * Develop, review, and approve site construction specifications related to mechanical piping, equipment, and the associated distribution rooms and buildings. Skills and Qualifications * Bachelors Degree in Engineering Field * 7+ years of project experience focused on HVAC, exhaust, plumbing, chilled water/heating hot water systems, compressed dry air generation and distribution in an industrial setting. * Registered Professional Engineer in state of Texas or registered in another state with ability to transfer preferred. * Project Management Professional (PMP) or Program Management Professional (PgMP) preferred. The current base salary range for this role is between $81,490 and $133,455. Individual base pay rates will depend on factors including duties, work location, education, skills, qualifications and experience. Total compensation for this position will include a competitive benefits package and may include participation in company incentive compensation programs, which are based on factors to include organizational and individual performance. Total Rewards At Samsung SAS, base pay is just one part of our total compensation package. The base compensation for this role will depend on education, experience, skills, and location. We offer a comprehensive benefits package, including: * Medical, dental, and vision insurance * Life insurance and 401(k) matching with immediate vesting * Onsite café(s) and workout facilities * Paid maternity and paternity leave * Paid time off (PTO) + 2 personal holidays and 10 regular holidays * Wellness incentives and MORE Eligible full-time employees (salaried or hourly) may also receive MBO bonuses based on company, division, and individual performance. All positions at SAS are full-time on-site. U.S. Export Control Compliance This role requires access to information subject to U.S. export control laws. Applicants must be authorized to access such information or eligible for government authorization. Trade Secrets Notice By submitting an application, you agree not to disclose to Samsung-or encourage Samsung to use-any confidential or proprietary information (including trade secrets) belonging to a current or former employer or other entity. * Please visit Samsung membership to see Privacy Policy, which defaults according to your location. You can change Country/Language at the bottom of the page. If you are European Economic Resident, please click here. * Samsung Electronics America, Inc. and its subsidiaries are committed to employing a diverse workforce, and provide Equal Employment Opportunity for all individuals regardless of race, color, religion, gender, age, national origin, marital status, sexual orientation, gender identity, status as a protected veteran, genetic information, status as a qualified individual with a disability, or any other characteristic protected by law.