Mechanical design engineer jobs in Davenport, IA

Job Description RFA Engineering (*************** is an engineering service provider dedicated to delivering our clients with timely engineering support and expertise. We are seeking an experienced candidate to become an integral part of our engineering team. The selected candidate will work with an experienced engineering staff using state-of-the-art engineering tools & processes. This position will operate onsite at our customer's world-class engineering and manufacturing facility. This is a full-time position with a full benefit package listed below that includes opportunities for professional growth, direct hire by our customers, and additional opportunities within our own organization. Mechanical Design Engineer As a Mechanical Design Engineer, you will be responsible for finding, vetting, designing, and implementing cost reduction ideas into production. The support operates across product lines and vehicle systems (structures, hydraulics, powertrain, electrical, and cabs). Work with various product line specific design engineers to understand function and requirements Responsibilities Create models and prints utilizing proper model-based definition methods and GD&T Ability to work with a large number of stakeholders and communicate project scope, status, changes, and challenges Work with various suppliers and internal departments to facilitate part fit-up, testing, and start of production Supporting fit ups on the factory floor and supporting new part testing as needed Communicate project details across all levels of the organization Manage multiple tasks and projects with different product groups Requirements Bachelors of Science in Mechanical, Aerospace, or Agricultural Engineering or related degree 3+ years of demonstrated design or cost reduction experience. Excellent communication both written and verbal Demonstrated ability to meet get projects completed with minimal oversight Strong analytical, problem solving and troubleshooting skills Ability to work independently Desired Skills Creo and Windchill proficiency Knowledge and application of GD&T standards Familiarity with CI processes Strong communication skills with ability to present and speak in front of groups Collaboration and flexibility across multiple design disciplines and product lines Adaptability to accommodate changes in scope and schedule of projects Familiarity with construction and forestry equipment Visa sponsorship is NOT available for this position. Pay Range: $80,000-$110,000 - Commensurate with experience About RFA Engineering RFA Engineering has provided product development and engineering services to industry leading customers since 1943. Our primary focus is the development of off highway equipment including agricultural, construction, mining, recreational, industrial, and special machines. Our work includes concept development, product design, documentation, problem-solving, simulation, optimization, and testing of components, systems and complete machines. Our engineering staff is located at our Engineering Center in Minneapolis, branch office in Dubuque, IA, and at numerous customer sites throughout the U.S. Competitive Benefits Health and Dental Insurance TelaDoc Healthiest You Supplemental Vision Insurance Company Paid Life Insurance Company Paid Long-Term Disability Short-term Disability Retirement Savings Account (Traditional 401k & Roth 401k) Flexible Spending Plan Dependent Care HSA for Medical Expenses Bonus Plan (Exempt Employees Only) Paid Time Off (PTO) Paid Holidays Bereavement Leave Employee Assistance Programs (EAP) Education Assistance Equal Opportunity and Veteran Friendly

Stanley Consultants is an award-winning and industry-leading global consulting engineering firm, with an unmatched commitment to culture, values, and ethics. We are dedicated to client experience and solve the most complex challenges to create a sustainable, connected, and enriched world for all. As the world changes, Stanley strategically evolves with it, integrating the latest technology, innovation, and resiliency practices. With over a century of experience serving the energy, federal government, transportation, and water sectors, we have helped improve lives and shape the infrastructure systems that connect us. As an employee-owned organization with a People First approach, we stand apart from other engineering consulting and services firms. At Stanley, your voice counts, your growth matters, and your success is our success. Stanley Consultants offers flexible work options, competitive pay and great benefits, a strong sense of community, and the chance to build a meaningful, long-term career! Job Title - Mechanical CADD DesignerLocation - Denver, CO (Centennial) | Jackson, MI | Muscatine, IAJob Type - HybridRequisition ID - 11128 Stanley Consultants is seeking a Mechanical CADD Designer. This position will use OpenPlant or Plant3D software to produce neat, legible mechanical piping construction documents that meet company and client quality control standards. Primarily functions as a graphics lead or task lead on simple projects or as a sub-lead on large, complex projects.What You Will Be Doing: Perform duties as graphics lead, including: Graphics budget and schedule control Plan and control the development of project drawings and other drafting presentations Receive objectives and technical advice from supervisor or engineer/architect. Revise drawings under direct supervision from verbal and written instructions, marked prints, sketches, computations, and other sources prepared by others. Accumulate and assemble information as directed by drafting or task leads. Familiarize yourself with engineering, construction, or drafting terms and symbols. Check for inconsistencies between drawings. Has a solid understanding of design and drafting techniques and a functional familiarity with engineering terminology. Gather information and data for projects from catalogs and other reference material. Perform other work-related duties as assigned. Required Qualifications: Associate or technical school degree, or combination of education and relevant experience. Proficient in some combination of Bentley MicroStation, OpenPlant, or Plant3d software. Familiar with putting together Isometric drawings using the software. Industrial, institutional, federal, or utility experience (or some combination) preferred. Mechanical 2D/3D drafting/modeling and design experience. Minimum of 5+ years of experience. Preferred Qualifications: Use of ProjectWise Use of AutoCAD Use of OpenPlant and Plant3D Stanley's Approach to FlexibilityWhile some members choose to work out of their local office on a full-time basis, we offer a hybrid schedule for eligible positions consisting of two days a week in the office, two days a week remotely, and Friday being a flexible day that can be worked either in the office or at home. Eligible roles can also offer a compressed workweek schedule. Members who participate will be assigned a 9/80 work schedule, meaning every other Friday off! What we offer:Member-Owned. Member-ownership is at the heart of our culture, aligning client satisfaction, company performance, and personal reward.Work-Life Balance. We realize there's more to life than just work.Paid Time Away. Stanley Consultants offers numerous paid holidays, generous paid time off (PTO), parental leave, and professional development leave.Health Portfolio. We provide a comprehensive portfolio of health services including medical, dental, vision, FSA, HSA, Doctor On Demand, wellness reimbursement, and mental health resources.Financial Health. We offer life insurance, short- and long-term disability insurance, identity theft protection, and many other benefits.Professional Growth. When your skills grow, so do we, which is why we offer tuition assistance, professional society membership, and more.Financial Rewards. We share our prosperity with members through company stock ownership, a generous 401K match, incentive compensation, and profit-sharing contributions to retirement 401K plans. Click Here: A Great Place To Work Learn more about Stanley Consultants in this short video: Working at Stanley Consultants Stanley Consultants does not welcome unsolicited resumes from staffing and recruiting agencies. Any unsolicited resumes submitted to Stanley Consultants, including but not limited to resumes submitted directly to Stanley Consultants members, or any of our representatives, will be deemed the property of Stanley Consultants. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

Established in 1991, Collabera has been a leader in IT staffing for over 22 years and is one of the largest diversity IT staffing firms in the industry. As a half a billion dollar IT company, with more than 9,000 professionals across 30+ offices, Collabera offers comprehensive, cost-effective IT staffing & IT Services. We provide services to Fortune 500 and mid-size companies to meet their talent needs with high quality IT resources through Staff Augmentation, Global Talent Management, Value Added Services through CLASS (Competency Leveraged Advanced Staffing & Solutions) Permanent Placement Services and Vendor Management Programs. Collabera recognizes true potential of human capital and provides people the right opportunities for growth and professional excellence. Collabera offers a full range of benefits to its employees including paid vacations, holidays, personal days, Medical, Dental and Vision insurance, 401K retirement savings plan, Life Insurance, Disability Insurance. Position Details: Industry Manufacturing Work Location Moline IL 61244 Job Title Design Engineer Duration 1 Year (Strong possibility of extension) Job Description: We'd like to see project engineers with a mechanical/vehicle/machinery background as well as Creo skills. Position Scope: • Looking for a motivated team player that can design, Validate, and implement combine Performance and Continuous Improvement projects as well as serve as a team design modeler. • Projects will cover all functions of the machine less the hydraulics, drives, electrical, and operator station sub-systems. • You will be responsible for the investigation, root cause analysis, design, and implementation of each project assigned. • This will require a strong communicator that can work across several departments for success. • In addition to the requirements in the position description, a strong candidate will have experience in designing combine systems, combine functional knowledge, on highway or off highway design experience, root cause investigation, implementing parts into production, and experience using client's AgPDM management and SAP systems. Qualifications REQUIRED SKILLS/EXPERIENCE: • BS in mechanical or agricultural engineering or related discipline and/or 3-5 years experience with managing and implementing mechanical design engineering projects. • ProE/Creo experience - Intermediate skill level/knowledge (sheetmetal, hose/tube routing) DESIRED SKILLS/EXPERIENCE: • Combine functional knowledge. • Background with off highway equipment and vehicles, agricultural preferred. • SAP experience. • PDM systems experience - (engineering data management software) • Product verification and validation of designs experience. • Knowledge of the application of analytical engineering tools (ie FEA). • Travel: Minimal field travel may be required. Additional Information To know more on this opportunity or to schedule an interview, please contact: Monaliza Santiago ************

Job Description 3D CAD Designer/Drafter - 1st Shift | $20-$25/hr | Bettendorf, IA Schebler, an employee-owned (ESOP) company, is looking for a talented 3D CAD Designer/Drafter to join our Chimney Systems Division. This is a 1st shift, Monday-Friday position where your designs directly contribute to our success. As an ESOP company, Schebler believes in the power of employee ownership. When you work with us, you become an owner and have a stake in our collective success. We foster an environment that values collaboration, innovation, and personal growth. Join us and help shape the future of our company while building a rewarding career. Essential Duties and Responsibilities: Develop 3D models and technical drawings from client specifications. Use Autodesk Inventor &AutoCAD to create submittal drawings & coordination models. Prepare manufacturing-ready drawings and accurate documentation. Review and validate work for accuracy and compliance. Communicate with clients to ensure designs meet their needs. Provide product knowledge and support to internal teams and stakeholders. Education, Experience, Certifications: Education: Associate's degree in CAD required; Bachelor's degree preferred. Experience: 1-2 years of relevant CAD design experience preferred. Required Knowledge, Skills, and Abilities: Proficiency in Autodesk Inventor preferred, with consideration given to proficiency in SolidWorks, or Creo/ProE. Strong AutoCAD and Microsoft Office skills (Excel, Outlook, Word). Detail-oriented, collaborative, and eager to learn. Other Requirements: Prolonged periods sitting at a desk and working on a computer. Must have the ability to communicate information in speaking and writing so others will understand. Must be able to see details at close range. Must be able to lift up to 15 pounds at times. Must be able to routinely move throughout the office area to assist customers and coworkers. At Schebler, you're more than a designer-you're an owner. Join us and design your future while shaping ours. Apply today! The above statements are intended to describe the general nature of work assigned to this job. This is not intended to be an exhaustive list of all responsibilities, duties and requirements . T his contractor and subcontractor shall abide by the requirements of 41 CFR §§ 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity or national origin. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status or disability. Job Posted by ApplicantPro

Full-time Description Shive-Hattery's Quad Cities (Bettendorf IA) office has an opening for a Mechanical Engineer with 5+ years of experience. Experience in building HVAC, piping, & plumbing design is required. Experience with industrial manufacturing projects is a plus. Mechanical design of building systems to include plumbing, heating, cooling, ventilation, fire protection, building automation, and industrial process systems Work in a team setting with mechanical team members and multi-disciplines teams including electrical, structural, architectural and civil Work on a variety of mechanical projects across our market sectors. Common projects include government facilities, healthcare, industrial, commercial and education facilities Produce construction drawings using Revit 3D modeling software Will be visiting project sites to assist with measuring, data collection and construction observation duties Why Shive-Hattery? You will find the right balance at Shive-Hattery. A large pool of resources in a 500+ person design firm, with a small firm feel where you build personal connections with colleagues, partners and clients. Flourish as a professional with the freedom to chart your own course and make an impact - and Design What Matters to make the world a better place. At Shive-Hattery, our learning and teaching culture is built on collaboration. You'll have the opportunity to both learn from and teach your peers, working across disciplines to enhance your skills and grow professionally. We offer a competitive total compensation package, including industry-leading pay and over thirty-five benefits designed to support your well-being and career development. Benefit Highlights: Medical, Dental, Vision - 4 tiers of coverage Voluntary Life Insurance - Employee, Spouse, and Child Voluntary Insurance Plans - Accident, Critical Illness, & Hospital Indemnity FSA - Medical & Dependent Care 8 Paid Holidays + PTO Paid Parental Leave 401K/Roth 401K with Company Match Overtime Bonus Profit Sharing Bonus First Time License Bonus Tuition Reimbursement & Licensure/Certification Financial Support Professional Development Opportunities Calm Meditation & Stress Relief Subscription …And Many More! U.S. Citizen, U.S. Person, or Immigration Status Requirements: At this time, we are unable to provide visa sponsorship now or in the future. Candidates must have current and ongoing authorization to work in the United States without employer sponsorship. Shive-Hattery offers a flexible work environment and supports balancing personal and professional responsibilities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Requirements Graduate of an accredited engineering school with bachelor's degree in Mechanical Engineering or Architectural Engineering with an HVAC emphasis. Registered Professional Engineer in at least one state. Experience as a lead mechanical engineer who guided a team of professional engineers on multiple projects. Experienced in 3D modeling software, Revit preferred. Experience with Microsoft Word and Excel is desired. Collaborates with other team members in a professional environment and have good interpersonal skills Communicates effectively, orally and in writing Manages time and workload effectively which includes planning, organizing, and prioritizing with attention to engineering detail

Proin eu mi. Nulla ac enim. In tempor, turpis nec euismod scelerisque, quam turpis adipiscing lorem, vitae mattis nibh ligula nec sem. Duis aliquam convallis nunc. Proin at turpis a pede posuere nonummy. Integer non velit. Donec diam neque, vestibulum eget, vulputate ut, ultrices vel, augue. Vestibulum ante ipsum primis in faucibus orci luctus et ultrices posuere cubilia Curae; Donec pharetra, magna vestibulum aliquet ultrices, erat tortor sollicitudin mi, sit amet lobortis sapien sapien non mi. Integer ac neque. Duis bibendum.

**Job Title** **Chemical Manufacturing Engineer** **Collaborate with Innovative 3Mers Around the World** Choosing where to start and grow your career has a major impact on your professional and personal life, so it's equally important you know that the company that you choose to work, and its leaders, will support and guide you. With a wide variety of people, global locations, technologies and products, 3M is a place where you can collaborate with other curious, creative 3Mers. **This position provides an opportunity to transition from other private, public, government or military experience to a 3M career.** **The Impact You'll Make in this Role** As a **Chemical Manufacturing Engineer** , you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative and diverse people around the world. Here, you will make an impact by: + Working with cross functional teams to make improvements to product cost, service, and quality + Improving productivity through continuous improvement activities + Writing, maintaining, and improving production standard operating procedures + Ensuring process safety and compliance by leading PSM activities on all assigned products, maintaining material balances, and leading waste reduction projects. **Your Skills and Expertise** To set you up for success in this role from day one, 3M requires (at a minimum) the following qualifications: + Bachelor's degree or higher (completed and verified prior to start) from an accredited institution in Chemical Engineering, Mechanical Engineering, or Industrial Engineering. + Five (5) years of Engineering Experience in a private, public, government or military environment. Additional qualifications that could help you succeed even further in this role include: + Ten (10) years of Engineering Experience in a private, public, government or military environment. + Experience as a Chemical Engineer in a Chemical based Manufacturing facility + Experience with Reactor Systems + Experience with Distributed Control Systems (DCS) **Work location:** + **Cordova, Illinois** **Travel: May include up to 5%** **Relocation Assistance: May be authorized** **Must be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status).** _Responsibilities of this position may include direct and/or indirect physical or logical access to information, systems, technologies subjected to the regulations/compliance with U.S. Export Control Laws._ _U.S. Export Control laws and U.S. Government Department of Defense contracts and sub-contracts impose certain restrictions on companies and their ability to share export-controlled and other technology and services with certain "non-U.S. persons" (persons who are not U.S. citizens or nationals, lawful permanent residents of the U.S., refugees, "Temporary Residents" (granted Amnesty or Special Agricultural Worker provisions), or persons granted asylum._ _To comply with these laws, 3M must help assess candidates' U.S. person status._ _The questions asked in this application are intended to assess this and will be used for evaluation purposes only. Failure to provide the necessary information in this regard will result in our inability to consider you further for this particular position._ **Supporting Your Well-being** 3M offers many programs to help you live your best life - both physically and financially. To ensure competitive pay and benefits, 3M regularly benchmarks with other companies that are comparable in size and scope. **Chat with Max** For assistance with searching through our current job openings or for more information about all things 3M, visit Max, our virtual recruiting Applicable to US Applicants Only:The expected compensation range for this position is $141,150 - $172,517, which includes base pay plus variable incentive pay, if eligible. This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate's relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences and Retirement Benefits, etc.). Additional information is available at: **************************************************************** Good Faith Posting Date Range 12/05/2025 To 01/04/2026 Or until filled All US-based 3M full time employees will need to sign an employee agreement as a condition of employment with 3M. This agreement lays out key terms on using 3M Confidential Information and Trade Secrets. It also has provisions discussing conflicts of interest and how inventions are assigned. Employees that are Job Grade 7 or equivalent and above may also have obligations to not compete against 3M or solicit its employees or customers, both during their employment, and for a period after they leave 3M. Learn more about 3M's creative solutions to the world's problems at ********** or on Instagram, Facebook, and LinkedIn @3M. Responsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties. Safety is a core value at 3M. All employees are expected to contribute to a strong Environmental Health and Safety (EHS) culture by following safety policies, identifying hazards, and engaging in continuous improvement. Pay & Benefits Overview: https://**********/3M/en\_US/careers-us/working-at-3m/benefits/ 3M does not discriminate in hiring or employment on the basis of race, color, sex, national origin, religion, age, disability, veteran status, or any other characteristic protected by applicable law. **Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly.** **3M Global Terms of Use and Privacy Statement** Carefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at 3M are conditioned on your acceptance and compliance with these terms. Please access the linked document by clicking here (************************************************************************************************* , select the country where you are applying for employment, and review. Before submitting your application, you will be asked to confirm your agreement with the terms. At 3M we apply science in collaborative ways to improve lives daily as our employees connect with customers all around the world. Learn more about 3M's creative solutions to global challenges at ********** or on Twitter @3M or @3MNews. 3M does not discriminate in hiring or employment on the basis of race, color, sex, national origin, religion, age, disability, veteran status, or any other characteristic protected by applicable law.

Job Description The Electrical Design Engineer is responsible for carrying out electrical design activities related to customer orders and customer quote requests assigned to the designer. The position & output includes providing recommendations on costs and performance for quote requests, as well as determining the final MIP for orders in collaboration with the mechanical designer. Key areas of effectiveness include the accuracy and volume of output, the cost efficiency of the product, and the timeliness of deliverables. The Designer is responsible for developing designs that require new applications, working with minimal supervision. This role involves handling designs with complex specifications, reviewing and approving test reports, resolving field issues, and proposing improvements to enhance cost, quality, and productivity. Key Responsibilities Electrical Design Activity for Quotes and Orders Review quotes, orders, and specifications Discuss any discrepancies or clarifications with the Sales team. Address clarifications or discrepancies with the customer, as well as any special application requirements. Support the Sales team in resolving specification issues. Collaborate with the Design Engineering Manager on special application or design requirements. Prepare electrical design using design programs. Estimate total costs based on past data and product knowledge. Report cost variance or pricing issues to the Sales team and Design Engineering Manager. Send drawings for approval to Sales, when needed. Review customer comments on approved drawings, if applicable. Order any special material, if required. Support Purchasing in finalizing specifications of purchased special components with Suppliers. Communicate final design details to Mechanical Designers. Create drawings for filing storage. Understand and apply design guidelines in SPI and other engineering documents, ensuring minimal cost. Implement changes through the HCN process in a timely manner, when applicable. Review and approve test reports, as required. Request special tests to meet customer's additional specifications, if required. Review field issues for resolution, as needed. Problem Solving Ability to solve problems on the shop floor and address customer-raised electrical design issues. Collaborates with the Manager on more complex issues to find solutions. Reviews reported shop defects, corrects designs, and uses this feedback to prevent future errors. Projects Participates and leads projects for cost reduction and quality improvement. Participation in quality improvement projects through MOS. Design for special applications and spec. Training for new staff members when required and provides guidance to other Designers. Maintenance of engineering files for Power along with Mechanical Designer. Participation in Transform projects as required Workflow Management Review personal work center daily for order of job completion. May need to prioritize jobs in some instances, with input from manager. Move operations in work center assigned to designer when completed. Do you qualify? We are seeking: Bachelor's degree in electrical engineering or similar 6+ years of experience working in electrical engineer 6+ years in transformer business or electromagnetic components Ability to communicate with internal customers and other departments. Ability to participate and lead project teams and contribute effectively. Ability to troubleshoot complex manufacturing and testing issues. Understanding of the requirements in standards and codes. Ability to guide and mentor other designers in understanding application requirements. Comprehensive knowledge of transformer design, manufacturing, and testing. Able to communicate with customers and vendors, align requirements with transformer specifications, and resolve issues effectively. Eager to learn and develop new skills. Works well in a team, offering support to others and seeking help when necessary. Provides guidance and mentorship to other designers. Creates detailed guidelines for design and testing processes for different applications. Some of the benefits of working at HPS Micron Group LLC: Casual dress Company events Company 401K Dental care Disability insurance Employee assistance program Extended health care Life AD/D insurance Medical insurance On-site parking Paid time off Tuition reimbursement Vision care We are a Great Place to Work Certified! Our people work hard for us-so we make sure our benefits work hard for them. Our equitable pay, benefits, and practices prioritize security, health, and well-being while sharing in our business success through competitive pay and excellent benefits. Our core benefits focus on wellness, mental health, and financial security when employees need them the most, early career or getting ready for retirement. We also support work-life balance through flexible work schedules, paid time off, and leaves of absence. Employees and their families also have access to our confidential, best-in-class Employee and Family Assistance Program (EFAP). We are committed to sustainable business practices and offer opportunities for our employees to support the communities where we live and work.

Why Join LeClaire Manufacturing? At LeClaire Manufacturing, you'll be part of a team that values innovation, craftsmanship, and collaboration. As a growing company with deep roots in precision aluminum casting and machining, we offer a dynamic environment where your ideas and skills directly impact our success. You'll enjoy the opportunity to work with cutting-edge technology, contribute to exciting new product launches, and grow your career alongside passionate professionals. We believe in investing in our people, fostering a culture of continuous improvement, and celebrating the pride that comes from building something exceptional. Position Summary: We are seeking a highly versatile Manufacturing Engineer / Tooling Specialist to support a fast-paced startup manufacturing environment. This role will flex between designing and building machining fixtures, permanent molds, and foundry patterns; and programming CNCs to meet evolving production demands. The proportion of design, fabrication, and CNC programming work will shift based on the immediate needs of the startup phase and early production ramp-up. Key Responsibilities: Design & Engineering Create 3D CAD models and detailed drawings for machining fixtures, permanent molds, and patterns. Collaborate with engineering, quality, and production teams to optimize designs for manufacturability and performance. Incorporate mold flow or machining simulation feedback into final designs. Fabrication & Toolmaking Manufacture tooling in-house using manual and CNC machining equipment, additive manufacturing, and standard shop tools. Assemble, fit, and finish molds, patterns, and fixtures to meet production specifications. Troubleshoot and repair tooling to minimize downtime. CNC Programming Develop and optimize CNC programs (3-, 4-, and 5-axis as applicable) for fixture components, patterns, and production parts. Select tooling, work holding, and cutting strategies to improve cycle time, quality, and tool life. Validate programs through simulation and on-machine prove-out. Cross-Functional Startup Support Shift seamlessly between design, hands-on toolmaking, and programming depending on production priorities. Support first-run trials, PPAPs, and process optimization efforts. Maintain accurate documentation and revision control for tooling and programs. Qualifications: Proven experience designing and building machining fixtures, permanent molds, and patterns. Proficiency in CAD (SolidWorks, Inventor, etc.) and CAM (Mastercam, Fusion 360, etc.) software. Strong CNC programming skills and hands-on machining experience. Familiarity with aluminum casting and machining processes preferred. Ability to move quickly between varied tasks and priorities in a startup environment. Strong problem-solving skills and attention to detail. Attributes for Success: Adaptable and resourceful, able to adjust workload focus daily. Communicative and collaborative across multiple departments. Quality-minded with pride in craftsmanship. Self-driven and capable of taking projects from concept through completion. Physical Requirements: Ability to lift up to 50 lbs. Comfortable working in both office/design and shop floor environments. Able to stand for extended periods when operating equipment. Ready to Make an Impact? If you're a hands-on problem solver who thrives in a fast-paced, collaborative environment, we invite you to bring your expertise to LeClaire Manufacturing. This is more than just a job-it's a chance to shape the future of a growing company while honing your skills across design, fabrication, and CNC programming. Join us and be part of a team that values craftsmanship, innovation, and continuous improvement. Apply today and help us build something extraordinary.

The Industrial Engineer is responsible for assembly and engineering processes integrated into TVS Supply Chain Solutions' Value Added Assembly services. The Industrial Engineer will work as a part of a cross-functional team with procurement, operations, quality, and IT. The Industrial Engineer will work to improve efficiency, material routing, and operational effectiveness. The role will also require serving as a workstream leader for new product introduction, including designing and implementing assembly and manufacturing processes. The Industrial Engineer will identify and implement required fixtures, mechanical controls, electrical controls, vision systems, and other work aids as needed. This role reports directly to the Director of Operations and indirectly to the Vice President of Operational Excellence. Please note that we are unable to provide immigration support or sponsorship for this position. Applicants must have the legal right to work in Iowa without requiring sponsorship now or in the future. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. * Collaborate in the design and development of new processes to optimize assembly efficiencies. * Design, implement, and Document error-proofing, including DC torque tools, hydraulic and pneumatic jigs and fixtures, and PLC-based control logic. * Evaluate existing processes, equipment, and products for effectiveness * Develop and implement cost-saving measures * Manage project tasks and coordinate with key stakeholders, including Operations, Business Development, and Finance. * Analyse operational data, layout, material, and workforce utilization; make and implement recommendations for improvement * Author engineering documentation including project plans, product deviations (ECNs), CAD files, bill of material, ladder logic, and equipment specifications and settings. * Collaborate with procurement and supply-chain departments for supplier development activities. * Identify, plan, and execute capital projects. * Diagnose and resolve PLC ladder logic (RSLOGIX) and Vision Inspection Systems (Cognex). Complete break / fix actions for all PLC-driven equipment. * Lead implementation activities for new or changing processes and systems. * Provide training, resources, and documentation. * Apply statistical methods and perform mathematical calculations to determine processes, staff requirements, and production standards. * Confer with vendors, staff, and management personnel regarding purchases, procedures, product specifications, service capabilities, and project status. * Participate in TVS SCS quality and excellence initiatives. Competencies * Technical Capacity * Communication proficiency * Problem-solving/analysis * Decision making * Initiative * Results driven * Thoroughness * Adaptability * Collaboration skills * Teamwork orientation * Time Management Physical Demands The physical demands described here are representative of those that an employee must meet to perform the essential functions of this job successfully. While performing the duties of this job, the employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee may occasionally be required to lift 51 pounds, anything over this, an employee needs to request assistance. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Work Environment This job is performed in a busy warehouse/manufacturing environment with high forklift traffic. Warehouses are subject to seasonal temperatures. Steel-toed shoes, safety glasses and vests are required Personal Protective Equipment (PPE). Position Type/Expected Hours of Work Full Time, Exempt. Schedule flexibility for extended or unplanned work hours is required. Travel National travel will be required on an as-needed basis. Education and Experience * Bachelor's degree in engineering or related field required. * 5+ years of work experience in Industrial Engineering and Supply Chain Operations * Proficient technical skills: MS Office, Outlook, CAD, Visio, RSLogix * Demonstrated understanding of MTMs (Methods-Time Measurement) and experience diagnosing/resolving PLC ladder logic issues (Programable Logic Controller). * Knowledge of a Warehouse Management System (WMS) or equivalent inventory software is preferred. * Lean Manufacturing experience is preferred. Other Duties Please note that this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities required of the employee for this job. Duties, responsibilities, and activities may change at any time, with or without notice. TVS SCS NA is committed to cultivating a diverse and inclusive culture as an EEO employer. The TVS SCS NA team does not discriminate against candidates and employees because of their disability, sex, race, gender identity, sexual orientation, religion, national origin, age, veteran status, or any other protected status under the law within any employment practices. We are pleased to provide reasonable accommodations to applicants; please contact [Hope Molyneaux, *********************] to request a reasonable accommodation. The employee selected for this role must be able to perform the position's essential functions satisfactorily. If requested, reasonable accommodation will be made to enable employees with disabilities to perform the essential functions of their job, absent undue hardship. TVS SCS NA complies with the CPRA: CALIFORNIA PRIVACY NOTICE **************************************************************************************************

Tri-City Group is currently seeking a Project Engineer for an immediate opening in Davenport, IA. The Project Engineer is responsible for on-site administrative and technical support on construction project sites. Responsibilities include but are not limited to: Complete projects on time, within budget and meet the quality demands of our clients Assist in research and documentation of the procurement of all major equipment packages Help with the tracking of progress and adherence of the scope of all sub-contractors to be utilized Assist in the management (scheduling and receiving direction) of all owners furnished equipment Assist in the logistics of all major package delivery and storage Administratively support the tracking and logging of all information required within the Procurement, Quality Assurance, Quality Control, and Commissioning activities under the direction of the Project Manager Support the Project Manager in all areas including, procurement, purchasing, subcontract and lease agreements, and equipment tracking Maintain Company presence during project meetings - Jobsite construction and coordination meetings Assist in tracking project schedule utilizing Primavera P6 software Assist in gathering documentation for field testing and owner acceptance Assist in closeout documents Assist in tracking and scheduling final punch list items Assist in scheduling and documenting Owner training Work with PMAs on submitting proper documentation for projects Assist in the shop drawing review process Qualifications: Bachelor's degree in engineering or construction management 1 or more years of related experience in Construction Administration, Construction management, and/or related education and experience. Excellent written and verbal communication skills Knowledge of Primavera P6 is a plus. OSHA 30 (preferred) If not certified, willingness to obtain upon hire. Candidates must possess strong attention to detail, tact, and consideration, a focus on accuracy, solid communication skills, positive initiative, and judgment, the ability to problem-solve and meet deadlines, self-motivation, business acumen, and organization. All job offers are contingent upon completing a successful drug screen and reference check. Tri-City Group is an equal opportunity employer.

Marmon Link As a part of the global industrial organization Marmon Holdings-which is backed by Berkshire Hathaway-you'll be doing things that matter, leading at every level, and winning a better way. We're committed to making a positive impact on the world, providing you with diverse learning and working opportunities, and fostering a culture where everyone's empowered to be their best. Marmon Renew is a global leader in beverage and food service equipment remanufacturing. Our commitment to quality, ability to meet specific customer needs, and provide 'like new' equipment at a reduced cost provides an immediate value proposition to our customers. As part of the Engineering team, the Manufacturing Engineer is responsible for the development and implementation of manufacturing processes on new and existing products to achieve an optimum relationship between cost and quality. This position is responsible for every aspect of process engineering, industrial engineering, production standard costs, tooling/equipment procurement, improving operating performance, identifying and reducing waste, supporting new product evaluation and onboarding, and troubleshooting in assigned areas of responsibility. This Manufacturing Engineer ensures a quality system is effectively implemented to prevent defects and provides information for continuous improvement, including using lean manufacturing concepts to eliminate waste. Essential Duties and Responsibilities * Continually evaluate alternatives leading to the development and implementation of manufacturing processes on new and existing products to achieve an optimum relationship between cost and quality. * Responsible for work center design and product/process flow including ergonomic considerations, lean manufacturing technology, mechanical design, electrical component usage & system logic, changeover ease, etc. to optimize the manufacturing process. * Evaluate new equipment models and develop processing plans and supporting standard work to launch production runs. * Lead business unit efforts in the development and implementation of lean manufacturing concepts including developing strategies, training employees, facilitating kaizen events, etc. * Coordinate activities in scrap reduction, elimination of rework, material variances, labor variances, safety & ergonomic evaluations, and overall continuous improvement in assigned areas. * Collaborate with the staff to ensure that all performance goals and objectives are supported. Establish and maintain a cooperative relationship with all support functions. * Coordinate activities with the Plant Manager to ensure conformance with objectives and policies. * Plan, justify, execute, and monitor capital programs as assigned. This includes budgeted capital projects such as tooling, equipment, automation initiatives, etc. * Develop and maintain the layout of production and non-production floor space for effective utilization. Develop and maintain all production routings, work measurement standards, manufacturing set-up and work instructions, work center descriptions, etc. for operations in assigned areas. * Provide support and coordinate all mechanical/electrical repairs with the Maintenance Department to develop detailed instructions for all preventative and predictive maintenance tasks for the upkeep of all equipment in assigned areas. * Develops sampling plans, quality standards, and process control instructions to monitor and reduce variation. * Interface with customer to identify process and product improvement opportunities and to identify short term, and long-term corrective actions. Required Qualifications, Skills/Competencies * BSME, BSIE, or equivalent with at least 3 years of experience in manufacturing and/or equivalent combination of education and experience. * Experience with implementing and executing lean manufacturing concepts. * Strong leadership and exhibited skills mentoring, developing, and training employees on continuous improvement. * Excellent persuasive skills and the ability to facilitate, support and implement change within the organization. * Proven ability to collaborate with leaders across the organization. * Proven project management skills. * Excellent written and verbal communication skills and ability to work with all levels of employees. * Ability to read, analyze and interpret business periodicals, professional journals, technical procedures, and governmental regulations. * Ability to write reports, business correspondence, procedure manuals and effectively present information and respond to questions from employees, engineers, and other disciplines. Pay Range: 64,000.00 - 96,000.00 We offer a comprehensive benefits package that may include medical, dental, vision, 401k matching, and more! Following receipt of a conditional offer of employment, candidates will be required to complete additional job-related screening processes as permitted or required by applicable law. We are an equal opportunity employer, and all applicants will be considered for employment without attention to their membership in any protected class. If you require any reasonable accommodation to complete your application or any part of the recruiting process, please email your request to ******************, and please be sure to include the title and the location of the position for which you are applying.

Job Description RFA Engineering (*************** is an engineering service provider dedicated to delivering our clients with timely engineering support and expertise. We are seeking a growth-oriented candidate to become an integral part of our engineering team. The selected candidate will work with an experienced engineering staff using state-of-the-art engineering tools & processes. This position will operate onsite at our customer's world-class engineering and manufacturing facility. This is a full-time position with a full benefit package listed below that includes opportunities for professional growth, direct hire by our customers, and additional opportunities within our own organization. Mechanical Design Engineer - Hydraulics We are seeking a Mechanical Design Engineer with a focus on hydraulic systems to support product design and integration. This role involves working closely with suppliers, customers, and cross-functional teams to develop efficient, cost-effective solutions. Key responsibilities include 3D modeling with Creo, creating 2D drawings, supporting assembly line challenges, and troubleshooting hydraulic systems. Responsibilities Communication with suppliers and customers on product selection and integration Use of Creo and Windchill to support 3-D Modeling of components, sheet metal and hydraulic or electrical routings. Creation and support of 2D drawings and specification documentation Work with manufacturing, quality, product verification and validation, customer support and suppliers to develop efficient and cost effective designs Support Assembly Line challenges Using Hydraulic Schematics to troubleshoot and validate system function. Compile and furnish necessary information (engineering decisions and reports of pertinent design analyses data) to document the design solution required for building of prototypes and adoption of the design with possible involvement of other functional engineers. Requirements Bachelor's of Science in Mechanical, Electrical, Aerospace, or Agricultural Engineering or related degree Strong mechanical and electrical aptitude demonstrated through work experience or hobbies Excellent communication both written and verbal Demonstrated ability to meet deadlines and commitments Strong analytical, problem solving and troubleshooting skills Ability to thrive in a team environment Desired Attributes Experience in 3-D Modeling Software; Creo (Preferred) Previous experience with Windchill or PDMLink Strong understanding of GD&T Design experience with off-road mobile equipment Ability to address quality issues, determine root cause and drive to a corrective action Desire to work in an engineering environment focusing on robust & cost effective designs Experience working with Hydraulic or Electrical Systems Experience operating off-road mobile equipment Visa sponsorship is NOT available for this position. Pay Range: $65,000-$90,000 - Commensurate with experience About RFA Engineering RFA Engineering has provided product development and engineering services to industry leading customers since 1943. Our primary focus is the development of off highway equipment including agricultural, construction, mining, recreational, industrial, and special machines. Our work includes concept development, product design, documentation, problem-solving, simulation, optimization, and testing of components, systems and complete machines. Our engineering staff is located at our Engineering Center in Minneapolis, branch office in Dubuque, IA, and at numerous customer sites throughout the U.S. Competitive Benefits Health and Dental Insurance TelaDoc Healthiest You Supplemental Vision Insurance Company Paid Life Insurance Company Paid Long-Term Disability Short-term Disability Retirement Savings Account (Traditional 401k & Roth 401k) Flexible Spending Plan Dependent Care HSA for Medical Expenses Bonus Plan (Exempt Employees Only) Paid Time Off (PTO) Paid Holidays Bereavement Leave Employee Assistance Programs (EAP) Education Assistance Equal Opportunity and Veteran Friendly

Job DescriptionStanley Consultants is an award-winning and industry-leading global consulting engineering firm, with an unmatched commitment to culture, values, and ethics. We are dedicated to client experience and solve the most complex challenges to create a sustainable, connected, and enriched world for all. As the world changes, Stanley strategically evolves with it, integrating the latest technology, innovation, and resiliency practices. With over a century of experience serving the energy, federal government, transportation, and water sectors, we have helped improve lives and shape the infrastructure systems that connect us. As an employee-owned organization with a People First approach, we stand apart from other engineering consulting and services firms. At Stanley, your voice counts, your growth matters, and your success is our success. Stanley Consultants offers flexible work options, competitive pay and great benefits, a strong sense of community, and the chance to build a meaningful, long-term career! Job Title - Mechanical CADD DesignerLocation - Denver, CO (Centennial) \u007C Jackson, MI \u007C Muscatine, IAJob Type - HybridRequisition ID - 11128 Stanley Consultants is seeking a Mechanical CADD Designer. This position will use OpenPlant or Plant3D software to produce neat, legible mechanical piping construction documents that meet company and client quality control standards. Primarily functions as a graphics lead or task lead on simple projects or as a sub-lead on large, complex projects.What You Will Be Doing: Perform duties as graphics lead, including: Graphics budget and schedule control Plan and control the development of project drawings and other drafting presentations Receive objectives and technical advice from supervisor or engineer/architect. Revise drawings under direct supervision from verbal and written instructions, marked prints, sketches, computations, and other sources prepared by others. Accumulate and assemble information as directed by drafting or task leads. Familiarize yourself with engineering, construction, or drafting terms and symbols. Check for inconsistencies between drawings. Has a solid understanding of design and drafting techniques and a functional familiarity with engineering terminology. Gather information and data for projects from catalogs and other reference material. Perform other work-related duties as assigned. Required Qualifications: Associate or technical school degree, or combination of education and relevant experience. Proficient in some combination of Bentley MicroStation, OpenPlant, or Plant3d software. Familiar with putting together Isometric drawings using the software. Industrial, institutional, federal, or utility experience (or some combination) preferred. Mechanical 2D/3D drafting/modeling and design experience. Minimum of 5+ years of experience. Preferred Qualifications: Use of ProjectWise Use of AutoCAD Use of OpenPlant and Plant3D (Hourly range for CO location) Stanley Consultants is committed to maintaining transparency in our hiring process, including providing information about compensation. The starting salary for the successful candidate in this position is competitive and will be determined by the selected candidate's qualifications and experience, geographic location, internal equity, company policy and practices. In compliance with pay transparency laws, pay ranges are disclosed for positions and locations where required. Stanley's Approach to FlexibilityWhile some members choose to work out of their local office on a full-time basis, we offer a hybrid schedule for eligible positions consisting of two days a week in the office, two days a week remotely, and Friday being a flexible day that can be worked either in the office or at home. Eligible roles can also offer a compressed workweek schedule. Members who participate will be assigned a 9/80 work schedule, meaning every other Friday off! What we offer:Member-Owned. Member-ownership is at the heart of our culture, aligning client satisfaction, company performance, and personal reward.Work-Life Balance. We realize there's more to life than just work.Paid Time Away. Stanley Consultants offers numerous paid holidays, generous paid time off (PTO), parental leave, and professional development leave.Health Portfolio. We provide a comprehensive portfolio of health services including medical, dental, vision, FSA, HSA, Doctor On Demand, wellness reimbursement, and mental health resources.Financial Health. We offer life insurance, short- and long-term disability insurance, identity theft protection, and many other benefits.Professional Growth. When your skills grow, so do we, which is why we offer tuition assistance, professional society membership, and more.Financial Rewards. We share our prosperity with members through company stock ownership, a generous 401K match, incentive compensation, and profit-sharing contributions to retirement 401K plans. Click Here: A Great Place To Work Learn more about Stanley Consultants in this short video: Working at Stanley Consultants Stanley Consultants does not welcome unsolicited resumes from staffing and recruiting agencies. Any unsolicited resumes submitted to Stanley Consultants, including but not limited to resumes submitted directly to Stanley Consultants members, or any of our representatives, will be deemed the property of Stanley Consultants. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c) We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

3D CAD Designer/Drafter - 1st Shift | $20-$25/hr | Bettendorf, IA Schebler, an employee-owned (ESOP) company, is looking for a talented 3D CAD Designer/Drafter to join our Chimney Systems Division. This is a 1st shift, Monday-Friday position where your designs directly contribute to our success. As an ESOP company, Schebler believes in the power of employee ownership. When you work with us, you become an owner and have a stake in our collective success. We foster an environment that values collaboration, innovation, and personal growth. Join us and help shape the future of our company while building a rewarding career. Essential Duties and Responsibilities: * Develop 3D models and technical drawings from client specifications. * Use Autodesk Inventor &AutoCAD to create submittal drawings & coordination models. * Prepare manufacturing-ready drawings and accurate documentation. * Review and validate work for accuracy and compliance. * Communicate with clients to ensure designs meet their needs. * Provide product knowledge and support to internal teams and stakeholders. Education, Experience, Certifications: * Education: Associate's degree in CAD required; Bachelor's degree preferred. * Experience: 1-2 years of relevant CAD design experience preferred. Required Knowledge, Skills, and Abilities: * Proficiency in Autodesk Inventor preferred, with consideration given to proficiency in SolidWorks, or Creo/ProE. * Strong AutoCAD and Microsoft Office skills (Excel, Outlook, Word). * Detail-oriented, collaborative, and eager to learn. Other Requirements: * Prolonged periods sitting at a desk and working on a computer. * Must have the ability to communicate information in speaking and writing so others will understand. * Must be able to see details at close range. * Must be able to lift up to 15 pounds at times. * Must be able to routinely move throughout the office area to assist customers and coworkers. At Schebler, you're more than a designer-you're an owner. Join us and design your future while shaping ours. Apply today! The above statements are intended to describe the general nature of work assigned to this job. This is not intended to be an exhaustive list of all responsibilities, duties and requirements. This contractor and subcontractor shall abide by the requirements of 41 CFR §§ 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity or national origin. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status or disability.

Job DescriptionDescription: Shive-Hattery's Quad Cities (Bettendorf IA) office has an opening for a Mechanical Engineer with 5+ years of experience. Experience in building HVAC, piping, & plumbing design is required. Experience with industrial manufacturing projects is a plus. Mechanical design of building systems to include plumbing, heating, cooling, ventilation, fire protection, building automation, and industrial process systems Work in a team setting with mechanical team members and multi-disciplines teams including electrical, structural, architectural and civil Work on a variety of mechanical projects across our market sectors. Common projects include government facilities, healthcare, industrial, commercial and education facilities Produce construction drawings using Revit 3D modeling software Will be visiting project sites to assist with measuring, data collection and construction observation duties Why Shive-Hattery? You will find the right balance at Shive-Hattery. A large pool of resources in a 500+ person design firm, with a small firm feel where you build personal connections with colleagues, partners and clients. Flourish as a professional with the freedom to chart your own course and make an impact - and Design What Matters to make the world a better place. At Shive-Hattery, our learning and teaching culture is built on collaboration. You'll have the opportunity to both learn from and teach your peers, working across disciplines to enhance your skills and grow professionally. We offer a competitive total compensation package, including industry-leading pay and over thirty-five benefits designed to support your well-being and career development. Benefit Highlights: Medical, Dental, Vision - 4 tiers of coverage Voluntary Life Insurance - Employee, Spouse, and Child Voluntary Insurance Plans - Accident, Critical Illness, & Hospital Indemnity FSA - Medical & Dependent Care 8 Paid Holidays + PTO Paid Parental Leave 401K/Roth 401K with Company Match Overtime Bonus Profit Sharing Bonus First Time License Bonus Tuition Reimbursement & Licensure/Certification Financial Support Professional Development Opportunities Calm Meditation & Stress Relief Subscription …And Many More! U.S. Citizen, U.S. Person, or Immigration Status Requirements: At this time, we are unable to provide visa sponsorship now or in the future. Candidates must have current and ongoing authorization to work in the United States without employer sponsorship. Shive-Hattery offers a flexible work environment and supports balancing personal and professional responsibilities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.Requirements: Graduate of an accredited engineering school with bachelor's degree in Mechanical Engineering or Architectural Engineering with an HVAC emphasis. Registered Professional Engineer in at least one state. Experience as a lead mechanical engineer who guided a team of professional engineers on multiple projects. Experienced in 3D modeling software, Revit preferred. Experience with Microsoft Word and Excel is desired. Collaborates with other team members in a professional environment and have good interpersonal skills Communicates effectively, orally and in writing Manages time and workload effectively which includes planning, organizing, and prioritizing with attention to engineering detail

Job Title Chemical Manufacturing Engineer Collaborate with Innovative 3Mers Around the World Choosing where to start and grow your career has a major impact on your professional and personal life, so it's equally important you know that the company that you choose to work, and its leaders, will support and guide you. With a wide variety of people, global locations, technologies and products, 3M is a place where you can collaborate with other curious, creative 3Mers. This position provides an opportunity to transition from other private, public, government or military experience to a 3M career. The Impact You'll Make in this Role As a Chemical Manufacturing Engineer, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative and diverse people around the world. Here, you will make an impact by: * Working with cross functional teams to make improvements to product cost, service, and quality * Improving productivity through continuous improvement activities * Writing, maintaining, and improving production standard operating procedures * Ensuring process safety and compliance by leading PSM activities on all assigned products, maintaining material balances, and leading waste reduction projects. Your Skills and Expertise To set you up for success in this role from day one, 3M requires (at a minimum) the following qualifications: * Bachelor's degree or higher (completed and verified prior to start) from an accredited institution in Chemical Engineering, Mechanical Engineering, or Industrial Engineering. * Five (5) years of Engineering Experience in a private, public, government or military environment. Additional qualifications that could help you succeed even further in this role include: * Ten (10) years of Engineering Experience in a private, public, government or military environment. * Experience as a Chemical Engineer in a Chemical based Manufacturing facility * Experience with Reactor Systems * Experience with Distributed Control Systems (DCS) Work location: * Cordova, Illinois Travel: May include up to 5% Relocation Assistance: May be authorized Must be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status). Responsibilities of this position may include direct and/or indirect physical or logical access to information, systems, technologies subjected to the regulations/compliance with U.S. Export Control Laws. U.S. Export Control laws and U.S. Government Department of Defense contracts and sub-contracts impose certain restrictions on companies and their ability to share export-controlled and other technology and services with certain "non-U.S. persons" (persons who are not U.S. citizens or nationals, lawful permanent residents of the U.S., refugees, "Temporary Residents" (granted Amnesty or Special Agricultural Worker provisions), or persons granted asylum. To comply with these laws, 3M must help assess candidates' U.S. person status. The questions asked in this application are intended to assess this and will be used for evaluation purposes only. Failure to provide the necessary information in this regard will result in our inability to consider you further for this particular position. Supporting Your Well-being 3M offers many programs to help you live your best life - both physically and financially. To ensure competitive pay and benefits, 3M regularly benchmarks with other companies that are comparable in size and scope. Chat with Max For assistance with searching through our current job openings or for more information about all things 3M, visit Max, our virtual recruiting Applicable to US Applicants Only:The expected compensation range for this position is $141,150 - $172,517, which includes base pay plus variable incentive pay, if eligible. This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate's relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences and Retirement Benefits, etc.). Additional information is available at: *************************************************************** Good Faith Posting Date Range 12/05/2025 To 01/04/2026 Or until filled All US-based 3M full time employees will need to sign an employee agreement as a condition of employment with 3M. This agreement lays out key terms on using 3M Confidential Information and Trade Secrets. It also has provisions discussing conflicts of interest and how inventions are assigned. Employees that are Job Grade 7 or equivalent and above may also have obligations to not compete against 3M or solicit its employees or customers, both during their employment, and for a period after they leave 3M. Learn more about 3M's creative solutions to the world's problems at ********** or on Instagram, Facebook, and LinkedIn @3M. Responsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties. Safety is a core value at 3M. All employees are expected to contribute to a strong Environmental Health and Safety (EHS) culture by following safety policies, identifying hazards, and engaging in continuous improvement. Pay & Benefits Overview: https://**********/3M/en_US/careers-us/working-at-3m/benefits/ 3M does not discriminate in hiring or employment on the basis of race, color, sex, national origin, religion, age, disability, veteran status, or any other characteristic protected by applicable law. Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly. 3M Global Terms of Use and Privacy Statement Carefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at 3M are conditioned on your acceptance and compliance with these terms. Please access the linked document by clicking here, select the country where you are applying for employment, and review. Before submitting your application, you will be asked to confirm your agreement with the terms.

Why Join LeClaire Manufacturing? At LeClaire Manufacturing, you'll be part of a team that values innovation, craftsmanship, and collaboration. As a growing company with deep roots in precision aluminum casting and machining, we offer a dynamic environment where your ideas and skills directly impact our success. You'll enjoy the opportunity to work with cutting-edge technology, contribute to exciting new product launches, and grow your career alongside passionate professionals. We believe in investing in our people, fostering a culture of continuous improvement, and celebrating the pride that comes from building something exceptional. Position Summary: We are seeking a highly versatile Manufacturing Engineer / Tooling Specialist to support a fast-paced startup manufacturing environment. This role will flex between designing and building machining fixtures, permanent molds, and foundry patterns; and programming CNCs to meet evolving production demands. The proportion of design, fabrication, and CNC programming work will shift based on the immediate needs of the startup phase and early production ramp-up. Key Responsibilities: * Design & Engineering * Create 3D CAD models and detailed drawings for machining fixtures, permanent molds, and patterns. * Collaborate with engineering, quality, and production teams to optimize designs for manufacturability and performance. * Incorporate mold flow or machining simulation feedback into final designs. * Fabrication & Toolmaking * Manufacture tooling in-house using manual and CNC machining equipment, additive manufacturing, and standard shop tools. * Assemble, fit, and finish molds, patterns, and fixtures to meet production specifications. * Troubleshoot and repair tooling to minimize downtime. * CNC Programming * Develop and optimize CNC programs (3-, 4-, and 5-axis as applicable) for fixture components, patterns, and production parts. * Select tooling, work holding, and cutting strategies to improve cycle time, quality, and tool life. * Validate programs through simulation and on-machine prove-out. * Cross-Functional Startup Support * Shift seamlessly between design, hands-on toolmaking, and programming depending on production priorities. * Support first-run trials, PPAPs, and process optimization efforts. * Maintain accurate documentation and revision control for tooling and programs. Qualifications: * Proven experience designing and building machining fixtures, permanent molds, and patterns. * Proficiency in CAD (SolidWorks, Inventor, etc.) and CAM (Mastercam, Fusion 360, etc.) software. * Strong CNC programming skills and hands-on machining experience. * Familiarity with aluminum casting and machining processes preferred. * Ability to move quickly between varied tasks and priorities in a startup environment. * Strong problem-solving skills and attention to detail. Attributes for Success: * Adaptable and resourceful, able to adjust workload focus daily. * Communicative and collaborative across multiple departments. * Quality-minded with pride in craftsmanship. * Self-driven and capable of taking projects from concept through completion. Physical Requirements: * Ability to lift up to 50 lbs. * Comfortable working in both office/design and shop floor environments. * Able to stand for extended periods when operating equipment. Ready to Make an Impact? If you're a hands-on problem solver who thrives in a fast-paced, collaborative environment, we invite you to bring your expertise to LeClaire Manufacturing. This is more than just a job-it's a chance to shape the future of a growing company while honing your skills across design, fabrication, and CNC programming. Join us and be part of a team that values craftsmanship, innovation, and continuous improvement. Apply today and help us build something extraordinary.

Established in 1991, Collabera has been a leader in IT staffing for over 22 years and is one of the largest diversity IT staffing firms in the industry. As a half a billion dollar IT company, with more than 9,000 professionals across 30+ offices, Collabera offers comprehensive, cost-effective IT staffing & IT Services. We provide services to Fortune 500 and mid-size companies to meet their talent needs with high quality IT resources through Staff Augmentation, Global Talent Management, Value Added Services through CLASS (Competency Leveraged Advanced Staffing & Solutions) Permanent Placement Services and Vendor Management Programs. Collabera recognizes true potential of human capital and provides people the right opportunities for growth and professional excellence. Collabera offers a full range of benefits to its employees including paid vacations, holidays, personal days, Medical, Dental and Vision insurance, 401K retirement savings plan, Life Insurance, Disability Insurance. Position Details: Industry Manufacturing Work Location East Moline IL 61244 Job Title Manufacturing Engineer Duration 1 Year (Strong possibility of extension) Job Description: • Duties: Provides support and basic trouble shooting for current operations. Investigates, gathers and analyze data for specifically assigned, recurring tasks. • Establishes routings, methods, layouts, tools, costs, methods documentation, quality plans and labor standards for revisions to current operations and/or new parts or programs of limited scope. • Identifies and implements cost reduction, quality, safety and ergonomic improvement ideas of limited scope. • Works with electronic tools to perform engineering functions. Develops and implements plans of limited scope to support lean manufacturing through the client's Production System. • Designs operations layouts to improve material flow and material presentation. • Participates in team studies related to capacity, energy, productivity and efficiency. Implements new manufacturing processes and technology. • Modifies existing performance pay plans; assists in development of baseline data for new wage performance pay plans. • Provide production support to assembly line departments in both routine and special safety/quality/productivity projects and actions. Qualifications • This is a 1st shift position, typically 7 am - 3:30 pm but some OT is required and starts and end times will need to be flexible. • Prefer 1+ year in Assembly Manufacturing Engineering and SHOP FLOOR experience. • Candidate should be familiar with assembly, tools, processes and systems (previous exposure to client is a plus). • Candidate must have daily support to line operations/shop floor experience. • Ability to interact with wage operators as well as other salaried workers is required. • Real world, industrial shop floor experience is necessary for this position, the education requirement for • BS in engineering is preferred but secondary to the need for on the job experience. Additional Information To know more about this position, please contact: Monaliza Santiago ************