Mechanical design engineer jobs in Lake Mary, FL - 482 jobs

About Us: CUES is the global leader in water, wastewater, and stormwater inspection equipment. We design advanced robotic systems that keep water infrastructure safe and reliable. What You'll Do Design & Develop: Create mechanical systems for robotic cameras, transporters, and lifting devices. Innovate: Work on electromechanical systems for mobile robots used in pipe inspection and repair. Collaborate: Partner with electrical, firmware, and software engineers to build integrated robotic solutions. Model & Analyze: Use SolidWorks for 3D modeling and perform simulations to optimize performance. Test & Validate: Develop test methods, analyze data, and ensure compliance with UL, ANSI, ISO standards. Lead Projects: Manage schedules, guide junior engineers, and drive design improvements. Stay Ahead: Research emerging technologies in robotics and automation. What We're Looking For Education: Bachelor's in Mechanical Engineering (Master's preferred). Experience: 6+ years in mechanical design for robotics, automation, AGVs, or drones. Skills:CAD proficiency (SolidWorks) Machine design (power transmission, sealing, mechatronics packaging) Knowledge of GD&T, FEA, and design for manufacturing Familiarity with electrical principles and interdisciplinary teamwork Bonus Points: Experience with controls programming and electronics. Why Join Us? You'll help shape the future of robotic systems that protect critical water infrastructure-working on cutting-edge technology in a collaborative environment. Would you like me to also create a short version for posting on LinkedIn or job boards (around 4-5 bullet points), or a candidate screening checklist based on this role?

Seeking a Geotechnical Construction Design Engineer for the Orlando FL market. Company values honesty, compassion and teamwork... And they are doubling their size in the next year! Looking for a new Design Engineer to be a part of that growth! Geotechnical Construction Design Engineer Benefits: Health, dental and vision Life and disability insurance PTO and vacation Paid holidays 401K Geotechnical Construction Design Engineer Requirements: Must be local in the Orlando FL area - no relocation options available Bachelor's Degree in Geotechnical or Civil Engineering Must have a Florida PE license 4+ years of current experience as a titled Design Engineer for a Geotechnical Construction company Experience with MSE walls, shored excavations, and FDOT specifications Experience with foundation, grouting and/or retaining wall design and construction Experience with estimates, proposals and project delivery activities Exceptional attention to detail and analytical skills Autonomous mentality, critical thinking and decision-making skills Experience with AutoCAD, LPILE, DeepFDN, Shoring Suite, etc Geotechnical Construction Design Engineer Preferred Skills: Experience in a contractor/design-build environment Existing relationships with FDOT constructors, Florida developers, design engineering firms and GCs

Our client is a full-service fire alarm & suppression company who have been in business for over 25 years. They offer high quality industrial and commercial fire protection systems and services. They are now looking to add a Fire Alarm Design Engineer to their growing team. You will be joining a business that has several offices down the East Coast, this role will be based in the Orlando, Florida office Fire Alarm Designer As a Fire Alarm Designer, you will be responsible for creating comprehensive fire alarm system designs that meet project specifications, client needs, and regulatory requirements. Your work will involve collaborating with architects, engineers, and clients to develop effective solutions that ensure safety and compliance with fire codes and industry standards. You will utilize design software and your technical expertise to create detailed layout drawings, schematics, and specifications for fire alarm systems in various types of buildings. Job Responsibilities Read and interpret building construction documents such as drawings, specifications and other contract documents. Prepare fire alarm shop drawings, specifications, equipment submittals and computer hydraulic calculations as needed for compliance with applicable fire protection codes. Prepare material data submittals for fire alarm equipment and material as necessary. Survey existing buildings for accurate, economical installation of fire alarm systems. Work closely with Design Manager, Sr. Designer, Project Managers, field staff and other employees throughout the company. Generate Request for Information Forms (RFI's), test certificates and Operation and Maintenance Manuals (O&M's). Attend Project Manager's meetings as necessary. Job Qualifications NICET certification - Level I or higher. 3+ years' experience in commercial / industrial fire alarm design. CAD experience. Ability to read & analyze building construction documents. Ability to work in a timely manner and meet deadlines. Must possess a valid unrestricted driver's license. Must be able to drive to job sites. Must be detail oriented. Ability to communicate properly and professionally, both verbally and by documentation. Ability to coordinate and work well with others.

We're Watts. Together, we're reimagining the future of water. We feel proud every day about what we do. We're all part of the same crucial mission, no matter what function we support -- it's to provide safe, clean water for the world, and to protect our planet's most valuable resource. What we do: For 150 years, Watts has built best-in-class products that are trusted by customers in residential and commercial settings across the world. We are at the forefront of innovation, working with cutting-edge technology to provide smart and connected, sustainable water solutions for the future. Watts is a leading brand with a quality reputation - and we have a dynamic future ahead. Scope of Position This highly motivated individual, as part of the mechanical engineering team, will be responsible for supporting the manufacturing of stainless-steel fixtures from design to production. This role involves optimizing manufacturing processes, improving product quality, and collaborating with the mechanical design team to ensure efficient, cost-effective production. This position does not have direct reports. This position reports to the Mechanical Engineering Manager. This role is onsite and is based in Oviedo, FL. Primary Job Duties and Responsibilities Develop and evaluate manufacturing processes for stainless steel plumbing fixtures and secure hardware products Troubleshoot production issues and implement corrective and preventive actions 3D modeling of components, producing and maintaining technical drawings of the Company's products, and creating drawings of products for marketing purposes Work cross-functionally with mechanical, manufacturing, and quality teams to ensure project alignment Create and maintain manufacturing documentation, including work instructions, routings, BOMs, and process flows Assume responsibility for other projects and duties as assigned by the Mechanical Engineering Manager or company management. Support continuous improvement by identifying opportunities to reduce costs or improve manufacturing processes. Required Qualifications 3+ years of experience with stainless steel manufacturing or metal fabrication environments Strong proficiency in SolidWorks for 3D modeling and manufacturing drawings Ability to read and interpret engineering prints and specifications Strong analytical and problem-solving skills Understanding of manufacturing process and design for manufacturability Ability to manage multiple tasks and adapt to shifting project priorities Effective communication and collaboration skills across engineering and manufacturing teams Understanding of and adherence to applicable laws, codes, policies, regulations, and safety practices and procedures, as applicable. Must successfully establish employment eligibility and satisfactorily complete background checks and required pre-employment testing as a condition of employment. Preferred Qualifications Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, or a related field Familiarity with ASME, ASSE, and plumbing industry standards Experience with high security, anti-ligature, or vandal-resistant product design Knowledge of lean manufacturing principles and continuous improvement methodologies Understanding of surface finishing processes (polishing, passivation, electropolishing) General Applicable Company Competencies Commitment to Watts' values of integrity, accountability, continuous improvement and innovation, and transparency. Punctuality and dependability. Ability to be flexible and adapt to changing work priorities and stressful conditions. Adherence to all personnel policies, procedures, and standards of process as implemented by Watts. Maintain productive and collaborative relationships with other Watts employees. Adherence to Watts' seven cultural beliefs: Growth Mindset, Customer-Focused Innovation, Constant Communication, Clear Goals, Collaborate Globally, Be Inclusive, and Take Action. Working Conditions: While performing the job duties, you will be working on-site at a manufacturing facility and will perform the majority of your duties in an office environment. You may, at times, be required to be present on the manufacturing floor and will be required to wear the appropriate personal protective equipment. You will be required to work in the office at the Oviedo location (Monday - Friday). Your scheduled work hours will be communicated to you by your manager. Physical Requirements: Specific physical abilities required for this position include, but are not limited to: Ability to remain seated at a desk or workstation for extended periods. Ability to perform repetitive tasks like typing on a keyboard or using a mouse for extended periods. Ability to physically move around the office, organize or transport files, packages, or other office-related materials. Ability to read documents, use a computer, and perform data entry tasks. Ability to communicate clearly with management and coworkers, particularly in meetings or phone calls. Ability to operate standard office equipment such as computers, printers, phones, and copiers. Ability to occasionally lift and carry light objects, such as office supplies, documents, or small equipment. Nothing in this job description restricts Watts' right to assign or reassign duties, responsibilities, and working hours/conditions to this position at any time. This position is "at will," which means that either the employee or Watts may terminate the employment relationship at any time, with or without notice, and for any lawful reason. #LI Onsite Watts in it for you: Please note that the following benefits apply only to permanent roles and do not apply to internship roles. Competitive compensation based on your skills, qualifications and experience Comprehensive medical and dental coverage, retirement benefits Family building benefits, including paid maternity/paternity leave 10 paid holidays and Paid Time Off Continued professional development opportunities and educational reimbursement Additional perks such as fitness reimbursements and employee discount programs Learn more about our benefit offerings here: How we work: At Watts, our culture is team-oriented and supportive. Employees here genuinely care about the quality of their work, and about each other. Our people are the heart of who we are and contribute to our longevity and continued success. And this is a place where you can have a big career. No matter your role, there are opportunities for learning and development, and your daily contributions make a meaningful impact on the lives of people who use our products and on the future of water. Watts is committed to equal employment opportunity. We follow a policy of administering all employment decisions and personnel actions without regard to race, color, religion, creed, sex, pregnancy, national origin, sexual orientation, age, physical or mental disability, genetic disposition or carrier status, marital status, military or veteran status, minorities, or any other category protected under applicable federal, state, or local law. Consistent with the obligations of state and federal law, Watts will make reasonable accommodations for qualified individuals with disabilities. Any employee who needs a reasonable accommodation should contact Human Resources.

Interplan is a commercial architectural and engineering firm with over 50 years of experience specializing in restaurant and retail design for large nationwide clients. With offices in Orlando and Chicago, our Orlando office is expanding, and we are seeking a talented Mechanical Designer/Engineer to join our team! Responsibilities Single point contact for engineering projects Be able to do building heating/cooling load calculations Design applicable heating/cooling systems Equipment and system specifications Do basic HVAC plans for RTU and split system design Duct sizing and diffuser selection Temperature controls Grease exhaust hood design Grease exhaust/Make-up air systems Basic general exhaust systems Responsible to permit comments Review shop drawing submittals Other duties as assigned Qualifications & Prior Experience 2 - 4 years of professional experience in design required A minimum of 2 years experience in the design of building HVAC systems required Any retail or grocery store design experience a plus Experience in the design of building HVAC systems Has lead projects in mechanical and plumbing designs Has PE or on track to get PE Knowledge/understanding of mechanical building codes Knowledge of heating and cooling load calculations, mechanical materials, systems, and their application Experience with DX, chilled water, and variable air systems Ability to run heating/cooling loads with Carrier and/or Trane programs is required Ability to produce energy code calculations required Proficiency in AutoCAD 2000 or later to produce construction documents in accordance with Interplan standards required Compensation & Benefits Open and collaborative work environment Continuing Education and Professional Development Active employee lead activities committee Medical, Dental, and Vision Insurance Short Term Disability and employer-paid Long Term Disability and Life Insurance Flex Spending and Dependent Care Accounts Employee Assistance Program Health and Wellness Program Paid Holidays Paid Time Off (PTO) 401k with Employer Match, Financial Advisor for employees on ongoing Financial Wellness Education Performance-based Bonus Program Join our team at Interplan and contribute to creating spaces that celebrate Humanity! This is a full-time in-office position with opportunities for growth and development within the company.

Job Description Interplan is a commercial architectural and engineering firm with over 50 years of experience specializing in restaurant and retail design for large nationwide clients. With offices in Orlando and Chicago, our Orlando office is expanding, and we are seeking a talented Mechanical Designer/Engineer to join our team! Responsibilities Single point contact for engineering projects Be able to do building heating/cooling load calculations Design applicable heating/cooling systems Equipment and system specifications Do basic HVAC plans for RTU and split system design Duct sizing and diffuser selection Temperature controls Grease exhaust hood design Grease exhaust/Make-up air systems Basic general exhaust systems Responsible to permit comments Review shop drawing submittals Other duties as assigned Qualifications & Prior Experience 2 - 4 years of professional experience in design required A minimum of 2 years experience in the design of building HVAC systems required Any retail or grocery store design experience a plus Experience in the design of building HVAC systems Has lead projects in mechanical and plumbing designs Has PE or on track to get PE Knowledge/understanding of mechanical building codes Knowledge of heating and cooling load calculations, mechanical materials, systems, and their application Experience with DX, chilled water, and variable air systems Ability to run heating/cooling loads with Carrier and/or Trane programs is required Ability to produce energy code calculations required Proficiency in AutoCAD 2000 or later to produce construction documents in accordance with Interplan standards required Compensation & Benefits Open and collaborative work environment Continuing Education and Professional Development Active employee lead activities committee Medical, Dental, and Vision Insurance Short Term Disability and employer-paid Long Term Disability and Life Insurance Flex Spending and Dependent Care Accounts Employee Assistance Program Health and Wellness Program Paid Holidays Paid Time Off (PTO) 401k with Employer Match, Financial Advisor for employees on ongoing Financial Wellness Education Performance-based Bonus Program Join our team at Interplan and contribute to creating spaces that celebrate Humanity! This is a full-time in-office position with opportunities for growth and development within the company.

Individuals assigned to this classification will perform engineering calculations and must be able to layout and design systems in accordance with established policies, standards and procedures, but must exercise judgment in their application with minimal supervision. Individuals should be able to apply practical knowledge and experience in their field to resolve problems and conflicts related to the projects assigned to them. Individuals should be capable of independent decision-making for engineering tasks on the projects assigned to them. Individuals may occasionally supervise subordinate personnel or assist other engineers or designers. Qualifications: A Bachelor of Science degree in Mechanical Engineering and minimum 3 years of experience is required. EIT preferable. Or An associate degree with minimum 5 years' experience in the design of HVAC and/or Plumbing systems under the supervision of a Professional Engineer required. Responsibilities: Attends preliminary job meetings and helps evaluate scope of work performed. Independently prepares or directs preparation of system layout, detail drawings, schematics and specifications with minimum supervision. Performs calculations and design engineering systems. Provides technical information and assistance to project engineer or team leader. Makes recommendations as to the feasibility of certain systems or equipment and evaluate products for their application. Assists final plan checking. Respond to RFI's. Respond to code comments and resolve permit issues with code officials/AHJ. Assists in resolving construction conflicts and answers questions from contractors and bidders. Coordinate design work with other disciplines. Contact various public utility company personnel to coordinate mechanical and electrical utilities for a project. Review shop drawings for conformance to plans and specifications. Performs job site inspections and is responsible for thorough and competent field installations that meets the plans and specifications. Completes project “punch list” and assists in resolving any conflicts between owner and contractor. Mentor Engineering Designers I and II. Ability to meet fast-paced deadlines while maintaining quality design. Respond to RFI's and submittals. Additional duties as required. Skills: Active Listening. Critical Thinking. Proficient in REVIT preferred. Proficient in PDF manipulation. Researching and writing reports/opinions. Excellent written and oral communication. Proficient in Microsoft Office tools. Time Management. Equipment selection. WORK ENVIRONMENT: Must be able to handle stressful situations, multi-tasking, and working within reasonable time constraints to meet production schedules and budgets. Will work in normal office environment and may also be required to work outside of a normal office from time-to-time. The above criteria has been developed to establish guidelines for this position, but note that these are only guidelines, and a person's ability, talent, effort, personality, and other aspects of the profession shall become a deciding factor for each position. Promotions are dependent on effort, attitude, ability, need, and schooling and should not be considered automatic. Cuhaci & Peterson provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Cuhaci & Peterson complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Nothing in this restricts management's right to assign or reassign duties and responsibilities to this job at any time. Additionally, this job description reflects management's assignment of essential functions. It does not prescribe or restrict the tasks that may be assigned. Requirements are subject to possible modification to reasonably accommodate individuals with disabilities. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an “at will” relationship between the employee and Cuhaci & Peterson Architects, Engineers & Planners, Inc.

This is a reputable and one of the fastest growing MEP firms in the state of FL. Based in Orlando, FL with office in the Midwest. The Mechanical Engineer, E.I.T. shall develop theability to produce comprehensive facility mechanical designs while assisting the project engineer and, at a minimum, have the following capabilities: • Understand advanced mechanical/HVAC theory and calculations, mechanical system components and devices. • Have the ability to comprehend and implement inputs and direction from the project engineer. • Apply Revit, AutoCAD, energy calculation, word processing/spreadsheet and other basic software to support project designs. • Quickly develop knowledge of codes, standards, and best practices and the ability to apply them within the mechanical design. • Be able to develop and draft HVAC plans, riser diagrams and schedules. • Develop the understanding of the components of the electrical, plumbing and fire protection systems that will affect the design and be able to coordinate those discipline requirements into the mechanical design. • Attend internal and client coordination meetings with senior staff. • Apply general engineering principles to develop problem solving abilities and technical expertise. • Learn the basics of project management and project budgets. • Expectation of technical and management growth to assume a more responsible role. • Take personal ownership of the work produced. Requirements• Bachelor's degree and E.I.T. exam passed (required), military training, field experience, proven relevant technical experience. • Experience working in a professional A/E office, Consulting Firm, Construction Contractor, or equivalent. • Ability to travel. • Proficient in Revit, AutoCAD, energy calculation, word processing/spreadsheet and other basic software. • Strong written, verbal and communication skills with the ability to participate in a collaborative team environment. BenefitsThe company provides a full range of benefits from the start date and several weeks of PTO. Medical, Dental, Life & AD&D Voluntary Medical GAP Insurance Voluntary Vision Insurance Voluntary Short Term Disability and Long Term Disability Voluntary Additional Life/AD&D AFLAC CLICK TO UPLOAD YOUR RESUME HERE Or email your resume to: Company Email We are an Engineering Specialized Placement Firm based in Florida with Clients throughout the US. Visit our website or call us if you'd like to review offers. Stargate Recruiting, LLC or call our office: **************

We are looking for motivated mechanical engineers to develop cutting-edge products for our military, governmental, and commercial customers. Our group of mechanical engineers drive products from conception to production including product ideation, research, laboratory/prototype builds, experimental testing, and design for manufacturing. We do not hire discrete design, test, and analysis engineers - our engineers work across all of these roles. This is a hands-on job which will see you design something in CAD, perform FEA/CFD/hand analysis on it, have it fabricated, and physically test and iterate it yourself. As an engineer, you'll have the opportunity to lead your own projects and research. Your creativity and interest determine the next technology you investigate. We design and manufacture a wide variety of products and perform R&D on an even wider variety. Some of our ongoing research efforts that you may be involved with in this role include: HVAC systems for highly-demanding military applications, diesel engine component design and electrification, advanced robotics and additive manufacturing, design and fabrication of ZnS windows for hypersonic vehicles, laser weapon cooling systems, and much more. You will have the opportunity to learn every day, and no two days will be the same. This position may include proposal writing for your next idea, analytical calculations, computational simulations (CFD and FEA), laboratory build and testing, and direct customer interfacing. Company Expectations We are looking for people that fit our values problem solvers; people that can innovate solutions to real-world problems intellectual curiosity and passion for engineering internally motivated; we do not micromanage highly-agile; our work crosses many boundaries, and no two days are alike Position Requirements BSME +3 years of experience OR MSME from an Accredited University GPA not less than 3.3 at all degree levels US Citizenship required due to strict ITAR regulations Strong understanding of mechanical engineering fundamentals Interest in hands-on engineering work in one or more focus areas of Mainstream Prior experience in design, test, and/or analysis with an interest in learning more about each ANSYS experience with willingness to verify design through test Knowledge of testing equipment and setups is a plus CFD/FEA modeling (ANSYS/FLUENT) experience is a plus Mainstream Engineering Corporation is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

OUC - The Reliable One is presently seeking a Project Engineer System Protection to join the Trans,Substation & Sys Protect division. At OUC, we don't just work - we're building a bright future of innovation and transformation for future generations. This is a hybrid position offering two remote workdays per week. Must be onsite Tuesdays and Thursdays. We are looking for a motivated Electrical Engineer with a strong background in power systems and protective relaying to support the design and reliability of substation protection and control systems. They will apply engineering expertise to support capital projects while ensuring compliance with NERC standards. OUC is an industry leader and the second largest municipal utility in Florida committed to innovation, sustainability, and our community. OUC's mission is to provide exceptional value to our customers and community by delivering sustainable and reliable services and solutions. Join a team of visionary Change Agents, Strategists, and Community Ambassadors who understand the vital role of diverse experiences in powering creativity and industry transformation. At OUC, each position contributes to the success and achievement of our goals. Click here to learn more about what we do. The ideal candidate will have: Bachelor's Degree in Electrical Engineering from accredited college or university. Minimum of four (4) years of experience in the electric utility industry Must have strong understanding of AutoCAD Knowledge of NERC Reliability Standards Ability to interpret Protection & Control drawings Strong project coordinator and task tracking abilities OUC offers a very competitive compensation and benefits package. Our Total Rewards package includes to cite a few: Competitive compensation Low-cost medical, dental, and vision benefits and paid life insurance premiums with no probationary period. OUC's Hybrid Retirement Program includes a fully-funded cash balance account, defined contribution with employer matching along with a health reimbursement account Generous paid vacation, holidays, and sick time Paid parental leave Educational Assistance Program, to include tuition reimbursement, paid memberships in professional associations, paid conference and training opportunities Wellness incentives and free access to all on-site OUC fitness facilities Access to family-oriented recreational areas Paid Conference and Training Opportunities Free downtown parking Hybrid work schedule Click here to view our Benefits Summary. Salary Range: $94,210.39 - $117,763.28 annually - commensurate with experience LOCATION Pershing- 6003 Pershing Ave. Orlando, FL 32822 Please see below a complete Job description for this position. Job Purpose: Design protection and control relaying applications for substations with focus on Protection & Control Settings and SCADA Settings. Expected to develop or possess expertise in protective relay settings calculations and analysis based on current and evolving standards (IEEE, NERC, etc.). Provide design support to field personnel; develop and maintain sufficient level of expertise in use of CAD software for efficient production of engineering work. Primary Functions: Ensure accomplishment of projects through effective planning, organizing, estimating, scheduling, and monitoring of work activities; Generate plans and drawings for projects associated with protective relaying and retrofits; Perform fault studies, relay setting calculations and relay loadability studies; ensure North American Electric Reliability Corporation (NERC) requirements are being met; Review calculations and relay settings performed by consultants; Create requisitions, track materials used in relay projects, and approve invoices associated with engineering work; Coordinate capital projects associated with protective relaying and control devices; Work with system protection supervisor to track work flow and resources; Perform line-testing and provide feedback and recommendations regarding system protection operations and maintenance; Perform other duties as assigned. Technical Requirements: This work requires an understanding of power systems, transformers, protective relaying, and electrical engineering principles. Additionally, expected to develop or possess expertise in protective relay settings calculations and analysis based on current and evolving standards (IEEE, NERC, etc.). Working knowledge of all, but not limited to the following: Interpretation of relay documents and Protection & Control design drawings Analysis and reporting of fault analysis and relay actions Experience with power system modeling and relay coordination studies using Aspen One- Liner software Familiarity with Aspen Relay Database, SEL-5030 AcSELerator, EnerVista UR, Software Applications (i.e. AutoCAD (design/drafting software), Setting (vendor) software, electrical engineer software (ASPEN) and fault analysis software; NERC Reliability standards; Institute of Electrical and Electronic Engineers (IEEE) standards; Gantt Chart development; Vendor instruction books; Related industry, organizational and departmental policies, practices, and procedures; legal guidelines, ordinances, and laws; Ability to use Microsoft Office Suite (Word, Excel, Outlook, etc.) and standard office equipment. Education/ Certification/ Years of Experience Requirements: Bachelor's degree in Electrical Engineering from an ABET accredited college or university; Minimum of four (4) years of engineering experience in the electric utility industry; System protection engineering experience (preferred); Special training to be completed within two (2) years of hire: Vendor Training System Protection Protective Relay Application Settings and Fault Analysis Software Training CADD Proficiency Leadership Training Working Conditions: This job may involve occasional exposure to some disagreeable elements (dust, heat, fumes, cold, noise, vibration, etc.) and accidents are improbable other than minor injuries. This job may involve occasionally with or around chemicals, insects and extreme heat (non-weather). This job may involve occasional exposure to blood borne pathogens and risk of electric shock. Physical Requirements: This job requires constant sitting, typing, reading, and writing. This job requires very frequent speaking and hearing. This job may require occasional driving of a company vehicle. OUC-The Reliable One is an Equal Opportunity Employer who is committed through responsible management policies to recruit, hire, promote, train, transfer, compensate, and administer all other personnel actions without regard to race, color, ethnicity, national origin, age, religion, disability, marital status, sex, sexual orientation, gender identity or expression, genetic information and any other factor prohibited under applicable federal, state, and local civil rights laws, rules, and regulations . EOE M/F/Vets/Disabled

DIRECT HIRE | DESIGN DRAFTER | Tavares/Leesburg, FL area Seeking a talented and detail-oriented Design Drafter with experience in structural/architectural drafting/design. Exciting opportunity to join a growing business (locations nationwide) and have access to new technologies as they pursue integrating AI technologies and advanced rendering software (fly-bys, walk-throughs, photographic-level renderings, etc.). You'll create custom building designs, photorealistic renderings, proposals, marketing collateral, and social media assets on fast-track schedules - directly impacting projects coast-to-coast while growing your skills in a collaborative, high-energy environment. Key Skills (do not have to have all): CAD, REVIT, Bluebeam, BIM, 3D Modeling, Rendering, Construction Materials, etc. **Experience with 3D renderings would be a big plus** Anticipate $50K-$70K, dependent on experience Full suite of benefits Seeking experience with Architectural and/or Structural Design/Drafting related to commercial builds Office-based role, M-F Responsibilities: Design and Drafting: Develop detailed drawings and plans for commercial buildings using AutoCAD. Collaboration: Partner with engineers, architects, and project managers to create comprehensive design solutions tailored to construction methods. Plan Review: Interpret and review project specifications, blueprints, and other technical documents specific to design. Compliance: Ensure all designs meet relevant building codes, standards, and regulations. Revisions: Update and revise drawings based on feedback from stakeholders and evolving project requirements. Documentation: Keep accurate records of all drawings, revisions, and project documentation. Requirements: Prefer Design/Drafting related degree/certifications 2+ years of experience in structural or architectural drafting/design for commercial buildings Proficiency in AutoCAD (3D), REVIT + Illustrator, SketchUp, Bluebeam, or Adobe InDesign Strong understanding of construction methods, materials, and building codes. Exceptional precision and attention to detail in drafting and design work. Excellent verbal and written communication skills. Ability to identify issues and develop effective solutions. Ability to collaborate effectively within a multidisciplinary team environment. Portfolio of design or drafting work required Keywords: Revit Designer, Architectural Renderer, 3D Visualization Specialist, Construction Graphics Designer, SketchUp Renderer, Prefab Design, Building Proposal Designer, Revit + Illustrator EEO

Job Description DIRECT HIRE | DESIGN DRAFTER | Tavares/Leesburg, FL area Seeking a talented and detail-oriented Design Drafter with experience in structural/architectural drafting/design. Exciting opportunity to join a growing business (locations nationwide) and have access to new technologies as they pursue integrating AI technologies and advanced rendering software (fly-bys, walk-throughs, photographic-level renderings, etc.). You'll create custom building designs, photorealistic renderings, proposals, marketing collateral, and social media assets on fast-track schedules - directly impacting projects coast-to-coast while growing your skills in a collaborative, high-energy environment. Key Skills (do not have to have all): CAD, REVIT, Bluebeam, BIM, 3D Modeling, Rendering, Construction Materials, etc. **Experience with 3D renderings would be a big plus** Anticipate $50K-$70K, dependent on experience Full suite of benefits Seeking experience with Architectural and/or Structural Design/Drafting related to commercial builds Office-based role, M-F Responsibilities: Design and Drafting: Develop detailed drawings and plans for commercial buildings using AutoCAD. Collaboration: Partner with engineers, architects, and project managers to create comprehensive design solutions tailored to construction methods. Plan Review: Interpret and review project specifications, blueprints, and other technical documents specific to design. Compliance: Ensure all designs meet relevant building codes, standards, and regulations. Revisions: Update and revise drawings based on feedback from stakeholders and evolving project requirements. Documentation: Keep accurate records of all drawings, revisions, and project documentation. Requirements: Prefer Design/Drafting related degree/certifications 2+ years of experience in structural or architectural drafting/design for commercial buildings Proficiency in AutoCAD (3D), REVIT + Illustrator, SketchUp, Bluebeam, or Adobe InDesign Strong understanding of construction methods, materials, and building codes. Exceptional precision and attention to detail in drafting and design work. Excellent verbal and written communication skills. Ability to identify issues and develop effective solutions. Ability to collaborate effectively within a multidisciplinary team environment. Portfolio of design or drafting work required Keywords: Revit Designer, Architectural Renderer, 3D Visualization Specialist, Construction Graphics Designer, SketchUp Renderer, Prefab Design, Building Proposal Designer, Revit + Illustrator EEO

Full-time Description Boat Company With over 100 years of excellence, Nautique Boat Company, a subsidiary of Correct Craft, is recognized globally for building the world's finest ski and wake boats. Since 1925, we've led the marine industry through innovation, superior craftsmanship, and a dedication to quality. Beyond our boats, we're driven by purpose. Through Nautique Cares, we contribute to causes both locally and around the globe improving that performance, people, and philanthropy go hand-in-hand. Learn more at ***************** Job Description: The CAD Engineer II plays a key role in developing and managing 3D CAD models and technical drawings that support product design, engineering, and manufacturing processes. This mid-level role emphasizes 3D modeling as a primary responsibility, ensuring accurate, functional digital representations of parts, assemblies, and systems. Working with moderate supervision, CAD Engineer II transforms rough design concepts into complete and detailed CAD deliverables, while coordinating closely with engineering and design teams to ensure quality and compliance with specifications. Key Responsibilities: Utilize CAD software to create 2D and 3D models using SolidWorks or similar CAD software. Collaborate with more senior engineering and project managers to understand the design requirements. Ensure compliance with relevant regulations, standards, and company policies throughout the design process. Works on projects of moderate to high complexity with support. Generate engineering models, drawings, and bills of materials for new designs under direction. Interpret engineering sketches, layouts, and verbal instructions to produce accurate CAD outputs. Maintain organized project files and documentation for easy access and review. Approve mechanical models and drawings for release. Creates 3D models for tooling. Resolve discrepancies between design intent, markups, and final deliverables. Assist in the development and design of composite parts and molds. Generate engineering change notices as required. Evaluate vendor-supplied items for their suitability regarding fit, finish, and performance. Gain exposure to some of the more complex tasks within the job function. Complete other functions assigned by supervisor. Skills and Abilities: Proficiency in CAD software, particularly SolidWorks. Strong understanding of mechanical design principles and materials. Ability to create and interpret technical drawings and specifications for productions product requests. Strong interpersonal, written, and verbal communication skills with the ability to work closely with all members of the organization. Demonstrated organization and project management skills. Strong analytical and conceptual thinking skills. Problem-solving skills and willingness to take initiative for decisions. Ability to juggle and manage competing tasks and demands and deal with frequent changes, delays, or unexpected events. Requirements Knowledge, Education, and/or Experience Required: BS in Mechanical Engineering or related technical field. Demonstrated proficiency in 3D CAD Modeling experience, preferably SolidWorks and NX. 2 to 4 years of CAD experience within a manufacturing environment. Understanding of engineering principles and design practices. Desire to work in a “hands-on” environment. Knowledge, Education, and/or Experience Preferred Experience in the marine industry. Experience with the development of composite parts. Knowledge of composite molding process. Experience with technical drawings and documentation. Ability to trailer a boat and operate. Physical Demands Must be able to work in a non-climate-controlled environment where ambient air temperature can exceed outside air temperature occasionally. Must be able to bend at the waist and knees and stand for extended periods of time. Must be able to lift 25 pounds when necessary. This is a safety-sensitive position. Additional Requirements: Must be a licensed driver with a good driving record (subject to MVR). Americans with Disability Specifications The physical demands described here are representative of those that must be met by an employee to successfully perform the essential function of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. The work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential function of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee may be exposed to weather conditions, a normal office environment, or a factory environment that is not climate controlled. The noise level in the work environment is usually moderate. The factory in certain areas maintains a high fiberglass and dust environment. Personal Protective Equipment might be required in certain areas of the factory including but not limited to safety glasses, respirators, hearing protection, gloves, and protective garments. Employees in safety-sensitive positions must report to work fit for duty and must remain fit for duty throughout their workday. To be fit for duty, the employee must not be impaired by alcohol, illicit drugs, or medication. Equal Employment Opportunity Employer Nautique Boat Company provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Nautique Boat Company complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Nautique Boat Company expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of Nautique Boat Company's employees to perform their job duties may result in discipline up to and including discharge.

Description: Objective Mack Industries is looking for a Precast Concrete Drafter to assist in the technical efforts necessary to support our sales, production, and product development departments. The main focus of this position will be to develop detailed shop drawings of precast concrete products and preparing bid submittal packages for customers. Paid Weekly Essential Functions Prepare project shop drawings to present to the customer for approval Completes submittals for customer approval Engages directly with customers to ensure specifications and lead time are met Works alongside sales and production teams contributing efforts where needed Maintains project flow, following targets as established by the Engineering Manager Communicates effectively with General Contractors, Field Personnel, Architects, Engineers and other departments to facilitate project outcomes and competition Utilizes Stack IT, AutoCAD, and 3-D software to create detailed shop drawings for fabrication Utilizes ERP Software to import orders, enter order lines. Requirements: Minimum Qualifications Associates or Bachelor's degree in Civil Engineering Technology or related field preferred Knowledge in precast manufacturing and construction processes a plus Construction experience a plus Proficient in AutoCAD Proficient in Microsoft Office Applications (Excel, PowerPoint, Word, Outlook, etc) Strong written and verbal communication skills Strong mathematics and science abilities a plus Valid driver's license with a clean driving record Behavioral Traits Willingness to work collaboratively within a team Customer focused, attentive and responsive. Proactive and independent with the ability to take initiative Shows good judgement in difficult situations Organized with attention to detail Shows accountability for efforts and results Environment Conditions and Physical Strain Due to the nature of the operation, the levels of noise, dust and dirt can be high. Must be able to lift up to 50 lbs., on occasion Must be able to stand for extended periods of time Must be able to squat, crawl, climb and kneel to complete tasks This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities and activities may change, or new ones may be assigned at any time with or without notice. Mack Industries, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status.

The Sr. Aerospace Engineer provides engineering support for aerospace systems and subsystems in support of DoD aviation and training programs. The engineer supports the analysis, design, integration, testing, validation, airworthiness, and sustainment of aircraft, aviation subsystems, and associated Training Aids, Devices, Simulators, and Simulations (TADSS). Responsibilities include supporting development and review of aerospace system requirements, specifications, and technical architectures; conducting performance, safety, and airworthiness analyses; supporting test planning, execution, and evaluation activities; and assisting with Government Acceptance Testing (GAT) and On-Site Acceptance Testing (OSAT). The Aerospace Engineer participates in reviews of design baselines, drawings, and technical data packages and supports configuration management and change control activities. The role supports analysis of flight performance, aerodynamics, structures, propulsion, avionics integration, and environmental factors as applicable. The Aerospace Engineer assists in development and review of technical documentation, engineering assessments, and reports; supports preparation and evaluation of Engineering Change Proposals (ECPs) and Value Engineering Proposals (VEPs); and participates in hardware and software quality assurance activities to ensure compliance with DoD, Army, and airworthiness requirements. Required Education Bachelor's degree in aerospace engineering or a closely related engineering discipline (Mechanical, Aeronautical, Systems Engineering) 10 years of experience performing aerospace or aviation engineering in support of military, DoD, or aviation programs Demonstrated experience in one or more of the following areas: Aircraft systems engineering and integration Aerodynamics, flight performance, or propulsion analysis Airworthiness and safety assessments Aerospace testing, validation, and acceptance support Review of technical drawings, specifications, and data packages Configuration management and engineering change support Preferred Qualifications Master's degree in aerospace engineering or a related discipline Experience supporting Army aviation platforms (e.g., UH-60, AH-64, CH-47, Huey II) Familiarity with: DoD 5000 series and Defense Acquisition Guidebook Airworthiness release processes Aviation standards and military specifications Certifications or training in: Systems Engineering (INCOSE) Six Sigma / Lean Test & Evaluation or airworthiness disciplines Clearance Requirement: An active Secret clearance is required

Interplan is a commercial architectural and engineering firm with over 50 years of experience specializing in restaurant and retail design for large nationwide clients. With offices in Orlando and Chicago, our Orlando office is expanding, and we are seeking a talented Mechanical Designer/Engineer to join our team! Responsibilities Single point contact for engineering projects Be able to do building heating/cooling load calculations Design applicable heating/cooling systems Equipment and system specifications Do basic HVAC plans for RTU and split system design Duct sizing and diffuser selection Temperature controls Grease exhaust hood design Grease exhaust/Make-up air systems Basic general exhaust systems Responsible to permit comments Review shop drawing submittals Other duties as assigned Qualifications & Prior Experience 2 - 4 years of professional experience in design required A minimum of 2 years experience in the design of building HVAC systems required Any retail or grocery store design experience a plus Experience in the design of building HVAC systems Has lead projects in mechanical and plumbing designs Has PE or on track to get PE Knowledge/understanding of mechanical building codes Knowledge of heating and cooling load calculations, mechanical materials, systems, and their application Experience with DX, chilled water, and variable air systems Ability to run heating/cooling loads with Carrier and/or Trane programs is required Ability to produce energy code calculations required Proficiency in AutoCAD 2000 or later to produce construction documents in accordance with Interplan standards required Compensation & Benefits Open and collaborative work environment Continuing Education and Professional Development Active employee lead activities committee Medical, Dental, and Vision Insurance Short Term Disability and employer-paid Long Term Disability and Life Insurance Flex Spending and Dependent Care Accounts Employee Assistance Program Health and Wellness Program Paid Holidays Paid Time Off (PTO) 401k with Employer Match, Financial Advisor for employees on ongoing Financial Wellness Education Performance-based Bonus Program Join our team at Interplan and contribute to creating spaces that celebrate Humanity! This is a full-time in-office position with opportunities for growth and development within the company.

Job Description We are looking for motivated mechanical engineers to develop cutting-edge products for our military, governmental, and commercial customers. Our group of mechanical engineers drive products from conception to production including product ideation, research, laboratory/prototype builds, experimental testing, and design for manufacturing. We do not hire discrete design, test, and analysis engineers - our engineers work across all of these roles. This is a hands-on job which will see you design something in CAD, perform FEA/CFD/hand analysis on it, have it fabricated, and physically test and iterate it yourself. As an engineer, you'll have the opportunity to lead your own projects and research. Your creativity and interest determine the next technology you investigate. We design and manufacture a wide variety of products and perform R&D on an even wider variety. Some of our ongoing research efforts that you may be involved with in this role include: HVAC systems for highly-demanding military applications, diesel engine component design and electrification, advanced robotics and additive manufacturing, design and fabrication of ZnS windows for hypersonic vehicles, laser weapon cooling systems, and much more. You will have the opportunity to learn every day, and no two days will be the same. This position may include proposal writing for your next idea, analytical calculations, computational simulations (CFD and FEA), laboratory build and testing, and direct customer interfacing. Company Expectations We are looking for people that fit our values problem solvers; people that can innovate solutions to real-world problems intellectual curiosity and passion for engineering internally motivated; we do not micromanage highly-agile; our work crosses many boundaries, and no two days are alike Position Requirements BSME +3 years of experience OR MSME from an Accredited University GPA not less than 3.3 at all degree levels US Citizenship required due to strict ITAR regulations Strong understanding of mechanical engineering fundamentals Interest in hands-on engineering work in one or more focus areas of Mainstream Prior experience in design, test, and/or analysis with an interest in learning more about each ANSYS experience with willingness to verify design through test Knowledge of testing equipment and setups is a plus CFD/FEA modeling (ANSYS/FLUENT) experience is a plus Mainstream Engineering Corporation is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics. Job Posted by ApplicantPro

Description: Boat Company With over 100 years of excellence, Nautique Boat Company, a subsidiary of Correct Craft, is recognized globally for building the world's finest ski and wake boats. Since 1925, we've led the marine industry through innovation, superior craftsmanship, and a dedication to quality. Beyond our boats, we're driven by purpose. Through Nautique Cares, we contribute to causes both locally and around the globe improving that performance, people, and philanthropy go hand-in-hand. Learn more at ***************** Job Description: The CAD Engineer II plays a key role in developing and managing 3D CAD models and technical drawings that support product design, engineering, and manufacturing processes. This mid-level role emphasizes 3D modeling as a primary responsibility, ensuring accurate, functional digital representations of parts, assemblies, and systems. Working with moderate supervision, CAD Engineer II transforms rough design concepts into complete and detailed CAD deliverables, while coordinating closely with engineering and design teams to ensure quality and compliance with specifications. Key Responsibilities: Utilize CAD software to create 2D and 3D models using SolidWorks or similar CAD software. Collaborate with more senior engineering and project managers to understand the design requirements. Ensure compliance with relevant regulations, standards, and company policies throughout the design process. Works on projects of moderate to high complexity with support. Generate engineering models, drawings, and bills of materials for new designs under direction. Interpret engineering sketches, layouts, and verbal instructions to produce accurate CAD outputs. Maintain organized project files and documentation for easy access and review. Approve mechanical models and drawings for release. Creates 3D models for tooling. Resolve discrepancies between design intent, markups, and final deliverables. Assist in the development and design of composite parts and molds. Generate engineering change notices as required. Evaluate vendor-supplied items for their suitability regarding fit, finish, and performance. Gain exposure to some of the more complex tasks within the job function. Complete other functions assigned by supervisor. Skills and Abilities: Proficiency in CAD software, particularly SolidWorks. Strong understanding of mechanical design principles and materials. Ability to create and interpret technical drawings and specifications for productions product requests. Strong interpersonal, written, and verbal communication skills with the ability to work closely with all members of the organization. Demonstrated organization and project management skills. Strong analytical and conceptual thinking skills. Problem-solving skills and willingness to take initiative for decisions. Ability to juggle and manage competing tasks and demands and deal with frequent changes, delays, or unexpected events. Requirements: Knowledge, Education, and/or Experience Required: BS in Mechanical Engineering or related technical field. Demonstrated proficiency in 3D CAD Modeling experience, preferably SolidWorks and NX. 2 to 4 years of CAD experience within a manufacturing environment. Understanding of engineering principles and design practices. Desire to work in a “hands-on” environment. Knowledge, Education, and/or Experience Preferred Experience in the marine industry. Experience with the development of composite parts. Knowledge of composite molding process. Experience with technical drawings and documentation. Ability to trailer a boat and operate. Physical Demands Must be able to work in a non-climate-controlled environment where ambient air temperature can exceed outside air temperature occasionally. Must be able to bend at the waist and knees and stand for extended periods of time. Must be able to lift 25 pounds when necessary. This is a safety-sensitive position. Additional Requirements: Must be a licensed driver with a good driving record (subject to MVR). Americans with Disability Specifications The physical demands described here are representative of those that must be met by an employee to successfully perform the essential function of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. The work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential function of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee may be exposed to weather conditions, a normal office environment, or a factory environment that is not climate controlled. The noise level in the work environment is usually moderate. The factory in certain areas maintains a high fiberglass and dust environment. Personal Protective Equipment might be required in certain areas of the factory including but not limited to safety glasses, respirators, hearing protection, gloves, and protective garments. Employees in safety-sensitive positions must report to work fit for duty and must remain fit for duty throughout their workday. To be fit for duty, the employee must not be impaired by alcohol, illicit drugs, or medication. Equal Employment Opportunity Employer Nautique Boat Company provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Nautique Boat Company complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Nautique Boat Company expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of Nautique Boat Company's employees to perform their job duties may result in discipline up to and including discharge.

Full-time Description Objective Mack Industries is looking for a Precast Concrete Drafter to assist in the technical efforts necessary to support our sales, production, and product development departments. The main focus of this position will be to develop detailed shop drawings of precast concrete products and preparing bid submittal packages for customers. Paid Weekly Essential Functions Prepare project shop drawings to present to the customer for approval Completes submittals for customer approval Engages directly with customers to ensure specifications and lead time are met Works alongside sales and production teams contributing efforts where needed Maintains project flow, following targets as established by the Engineering Manager Communicates effectively with General Contractors, Field Personnel, Architects, Engineers and other departments to facilitate project outcomes and competition Utilizes Stack IT, AutoCAD, and 3-D software to create detailed shop drawings for fabrication Utilizes ERP Software to import orders, enter order lines. Requirements Minimum Qualifications Associates or Bachelor's degree in Civil Engineering Technology or related field preferred Knowledge in precast manufacturing and construction processes a plus Construction experience a plus Proficient in AutoCAD Proficient in Microsoft Office Applications (Excel, PowerPoint, Word, Outlook, etc) Strong written and verbal communication skills Strong mathematics and science abilities a plus Valid driver's license with a clean driving record Behavioral Traits Willingness to work collaboratively within a team Customer focused, attentive and responsive. Proactive and independent with the ability to take initiative Shows good judgement in difficult situations Organized with attention to detail Shows accountability for efforts and results Environment Conditions and Physical Strain Due to the nature of the operation, the levels of noise, dust and dirt can be high. Must be able to lift up to 50 lbs., on occasion Must be able to stand for extended periods of time Must be able to squat, crawl, climb and kneel to complete tasks This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities and activities may change, or new ones may be assigned at any time with or without notice. Mack Industries, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status.