Mechanical design engineer jobs in Palm Springs, FL

Agilis is looking for Mechanical Design Engineers, both entry-level and experienced, who can help us solve complex problems related to gas turbines and other complex machinery. The Mechanical Design Engineer acts as a mentor to others and will work in a creative environment which is conducive to teamwork and strong professional development. Successful candidates for our positions will be able to work on a variety of projects using a variety of software. Responsibilities and duties for this position include: • Performing initial and ongoing design projects and reviews • Delivering documentation that provides critical analysis and suggestions for innovative solutions • Developing CAD project drawings • Collaborating with team members including program management and technical leads to optimize engine performance.

REQUIRES CANDIDATE RESIDENCY IN THE SOUTH FLORIDA AREA. Mechanical Design Engineer 2 with a minimum of 3 years experience in HVAC systems design. A candidate will only be considered for a position that has experience in this field. The ideal candidate will be expected to immediately step in to assist and provide support for all design aspects of assigned jobs. The candidate shall show a solid understanding of the HVAC Engineering discipline and can provide immediate support for a fast-paced environment. Candidate must have proficient knowledge of Revit and AutoCAD. Key responsibilities will include: Perform project and drawing set up tasks in Revit and AutoCAD by creating discipline specific drawing sheet using the architectural base files Independently produce basic & intermediate level HVAC designs using AutoCAD and/or Revit per applicable code under the supervision of a senior engineer Independently prepare HVAC engineering calculations required to design HVAC systems, including sizing of source equipment and distribution systems under the supervision of a senior engineer Read and learn international and local building codes to assist in producing code compliant design documents Attend project meetings as need to ensure scope of work understanding Conduct site visits to survey and capture existing conditions and author report that illustrate and describe observations and findings Communicate effectively with clients and internal team members in the design and specification development of HVAC building systems Execute construction administration duties which include first level responses to RFI and Submittal review under supervision of senior engineering staff Attend and participate in engineering industry training, events, and/or continuing education to stay current on latest engineering concepts and technologies Education and Experience 3+ years of HVAC (BUILDING) design experience in a relevant field of design Revit & AutoCAD proficiency Bachelor's Degree in Engineering from an accredited 4-year college/university is preferred

Join ENERCON as a Part-Time Principal Mechanical Engineer. We are seeking accomplished Mechanical Engineers at the Principal level to bring their expertise to high-impact projects. This flexible, part-time role (averaging 30 hours or less per week) allows seasoned professionals to continue shaping innovative solutions while maintaining work-life balance. If you are looking to share your years of knowledge, we encourage you to explore our exciting opportunity and become part of our innovative and impactful team. What divisions could you work for? Nuclear Services Group (NSG) ENERCON Federal Services (EFS) Responsibilities A typical day may include being part of a multi-discipline engineering team for major projects such as cooling water systems (pumps, motors, control systems, piping, heat exchangers) for existing or new power plants. Other days you may be leading simple design projects such as valve replacements or writing engineering reports (such as corrosion studies or pros and cons of different equipment). You will also: Deliver High-Quality Engineering Documents: Prepare accurate and error-free drawings, sketches, calculations, and analyses that meet industry codes, standards, and regulations, ensuring client needs are met with precision Adhere to Standards: Develop engineering documents in alignment with client, ENERCON, and regulatory requirements while following established procedures, processes, and project directives Stay Ahead of the Curve: Keep your knowledge sharp and current with industry codes, standards, safety culture principles, and advanced design techniques tailored to the nuclear sector Commit to Excellence: Produce engineering deliverables that meet stringent quality assurance standards, aligning with project scopes and exceeding client expectations Build Lasting Client Relationships: Establish trust and rapport with clients through clear communication, professional interactions, and the delivery of exceptional engineering solutions Collaborate Across Disciplines: Work closely with other teams to ensure designs are comprehensive, integrated, and consider the needs of all disciplines involved Get Hands-On in the Field: Travel to plant sites to connect with client personnel, conduct on-site walkdowns, and evaluate plant structures, systems, and components firsthand to inform project work #LI-MB1 Qualifications Bachelor's Degree in Mechanical Engineering from an accredited university or equivalent 10 years of prior experience in nuclear or power generation design of mechanical systems Experience in one of the following industries required: engineering/design services, power generation, nuclear power, heavy industrial including chemical or pulp & paper, and government (DOE) projects Nuclear Engineering Change qualifications from any site that can be transferred are preferred 10CFR50.59 Screen and / or Evaluation qualifications that can be transferred are preferred Thermal-hydraulic and design modification experienced desired Demonstrated proficiency in preparation of mechanical calculations Proficient in Word and Excel Good writing, presentation and communication skills Ability to be an individual contributor and work effectively in teams Candidates who have mentorship experience or a desire to mentor early to mid career engineers preferred Must be able to get badged at a nuclear facility Must be able to perform plant walkdowns Pay Range USD $90,000.00 - USD $177,450.00 /Yr. Additional Information About ENERCON: At Enercon Services, Inc. (ENERCON), we're driven by our people-and we're proud to offer rewarding careers in a culture of excellence. We provide a comprehensive benefits package and professional development opportunities that support your long-term growth. What We Offer: Enjoy full benefits for you and your dependents starting day one, no waiting period Flexible work arrangements, including hybrid and alternative schedules 401(k) with employer matching Tuition reimbursement Professional Engineer (PE) license support and incentives Want to see the full picture? Click HERE to see our Comprehensive Benefits Salary Range Information: If a salary range is listed, it reflects the typical range for this full-time position based on the role, level, and location. Individual compensation within the range will be determined by factors such as work location, relevant experience, job-related skills, and education or training. Eligibility to Work: Candidates must be legally eligible to work in the US without requiring current or future sponsorship. Ability to pass a pre-employment and random drug and alcohol screenings, ENERCON and client specific background checks, and annual motor vehicle record (MVR) according to company and client policies. Equal Opportunity Employer: ENERCON does not discriminate in employment opportunities or practices based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other characteristic protected by law. Connect with Us: *************** | LinkedIn

Join Our Team in Beautiful Martin County, Florida! The Martin County Board of County Commissioners is hiring! Are you ready to make a real impact in your community while enjoying the unmatched lifestyle of the Treasure Coast? We're looking for talented professionals who are passionate about public service, innovation, and shaping the future of Martin County. Why Work With Us? * Competitive Pay & Full Benefits Package * Florida Retirement System (FRS) Pension * Generous Paid Time Off & Holidays Now Hiring: Project Engineer Location: Martin County, FL Department: Public Works Department Salary: $78,796.87 - $129,519.83 Click here to view the full job description and apply now! Be a part of something bigger. Serve your community. Grow your career.

BROWARD COLLEGE MECHANIC APPRENTICE AND AIRCRAFT WASHER INTERNSHIP Internship Opportunity: Mechanic Apprentice and Aircraft Washer Supervising Department: Aircraft Maintenance, reporting to a Licensed A & P Mechanic Target Program at Broward College: Those individuals already on the pathway to Airframe & Powerplant Certification. Role Description: Work under the supervision and guidance of Mechanics of the department to ensure that aircraft are prepared to safely function per regulation. Participate in the Mechanic Apprentice training offered by the department. Participate in internal communication with all other departments related to equipment considerations, product excellence, scheduling issues and required paperwork. Focus on safety by observing self and teammates and being vigilant, report issues and offer suggestions to promote continuous process improvement. Perform the duties required to prepare, clean, wash and apply corrosion preventative so that aircraft are presented in the best possible manner. And other collateral duties as assigned such as inventory control. Value of the Opportunity: Gain real-world experience in the chosen field. Establish a relationship with a potential employer. Acquire skills in and understanding of Cessna 208 Aircraft. Successful evaluation of performance at the Ninety (90) Day milestone, from both Tropic Ocean Airways and a representative faculty member at Broward College, will lead to a conditional job offer. Upon graduation from the Broward College Program the graduate will transition to full-time employment with Tropic Ocean Airways, and accumulated experience on our Amphibious Caravan will translate to a higher pay rate to respect that tenure.

At McFarland Johnson (MJ), you'll own your future. We're a 100% employee-owned firm with 80 years of experience delivering innovative engineering, planning, environmental, technology and construction solutions that make a lasting impact on the clients and communities we serve. Certified as a Great Place to Work, our employee-owners describe MJ's culture as collaborative , people-focused , and supportive . Join us, and help shape the future of infrastructure, together. We're looking for a Junior Mechanical Engineer to join our growing Facilities division in Hollywood, FL. This is more than just a job - it's chance to shape your career, grow alongside a collaborative team, and help design the future of infrastructure solutions across the country. Position Summary The Mechanical Engineer will be responsible for the design, development, and technical execution of HVAC and other mechanical building systems for a variety of projects, including aviation, hospitality, healthcare, and educational facilities. This role requires the ability to work independently on complex tasks, ensure code compliance, and coordinate seamlessly with multidisciplinary teams using Building Information Modeling (BIM) workflows. Key Responsibilities HVAC System Design: Lead the design and development of complete HVAC systems, including performing detailed load calculations, equipment selection and sizing, and ductwork/piping layouts using software like Carrier HAP or Trane Trace. BIM & Construction Documents: Create detailed schematics, construction documents, and specifications using Revit MEP and AutoCAD, ensuring accuracy and adherence to company and industry standards. Project Coordination: Coordinate mechanical designs with architectural, structural, electrical, and plumbing teams, proactively identifying and resolving design conflicts through effective clash detection and BIM coordination. Technical Analysis & Compliance: Evaluate designs for code compliance (ASHRAE, NFPA, local energy codes), perform energy modeling analyses, and recommend design modifications to optimize system efficiency and performance. Leadership & Mentorship: Provide technical guidance and mentorship to junior engineering staff and designers, contributing to the team's professional development. Client & Stakeholder Interaction: Attend client meetings, conduct field inspections and site surveys, respond to Requests for Information (RFIs), and provide construction phase support. Qualifications & Skills Education: Bachelor's degree in Mechanical Engineering from an ABET-accredited program is required. Experience: A minimum of 5+ years of relevant mechanical engineering experience in a design consulting environment, with a strong background in HVAC systems. Software Proficiency: Expert-level proficiency in Building Information Modeling (BIM) software, specifically Revit MEP, is a core requirement. Familiarity with other design software (AutoCAD, SolidWorks) is a plus. Licensure: Progress toward or the ability to obtain Florida Professional Engineer (P.E.) licensure within a reasonable timeframe is highly desirable. Skills: Strong analytical, problem-solving, and project management skills. Excellent communication skills to collaborate effectively with clients, contractors, and internal teams. Knowledge: Comprehensive knowledge of industry codes, standards, and best practices related to mechanical building systems. Why Join Us? Career Growth: Accelerate your professional career with opportunities to lead, learn, and expand your expertise. Collaborative Culture: Work alongside multidisciplinary teams that thrive on creativity, support, and teamwork. Collaborative is the most frequent word used to describe MJ's culture in annual employee survey. Employee Ownership: As a 100% ESOP, your contributions directly shape our shared success - you own your future. Innovation & Impact: Work on projects that push boundaries, drive sustainability, and create real-world solutions. Professional Development: From mentorship, ongoing technical training, and conferences we invest in your growth every step of the way. Work-Life Balance: Enjoy flexible schedules, generous PTO, and a culture that values balance so you can thrive both professionally and personally. Shape the next generation: For experienced professionals, MJ offers the chance to mentor emerging talent, share your expertise, and leave a lasting legacy in the industry. Benefits & Perks Competitive base salary with performance-based incentive payment plan/bonus structure. Comprehensive benefits package, including medical, dental, vision coverage. Generous Paid Time Off, including Parental Leave. Company funded ESOP + 401(k) employer match. Ongoing technical training and professional development opportunities. Join Us and Make a Difference Join a team where your work has purpose, your ideas are valued, and your growth is personal. Apply today and become a part of a company where you can #ownyourfuture.

Job Description UNEW, Inc., formerly ETS Power Group, Inc. has been on the forefront of the Gas Turbine Engine OEM Replacement parts industry since 1999. Our success in the industry is a product of advanced knowledge and experience along with innovative concepts and efficient modification through design and quality control. Please visit our website at ************* At UNEW, we know our team is the reason for our success and we are highly selective when it comes to recruiting. Our company consists of “all-stars” in every department, at every level and has maintained a corporate culture aimed to empower, educate and value each team member's opinion and promote and create visionary ideas. The Senior Modeler-Drafter will play a critical role in supporting engineering activities related to part assembly and installation, ensuring the highest standards of quality and precision. Responsibilities: Collaborate with engineers to assist in the development of part assembly and installation engineering drawings. Create, modify, and check NX models and drawings to meet production requirements. Prepare comprehensive production detail drawings with a focus on accuracy and clarity. Review and implement changes to engineering drawings, ensuring compliance with industry standards and company protocols. Manage multiple projects independently, effectively prioritizing tasks to meet deadlines. Requirements: Associate's degree in a related field or applicable years of experience 5 years of experience in design/drafting Working knowledge of NX 10 or higher Experience with GOM software, a plus. Experience with gas turbines; Gas turbine airfoil experience a plus Due to the nature of our work, you must be a US Citizenship or Green card holder UNEW offers employees an environment that values diversity, strong work ethics, and provides a highly competitive salary, valuable benefits including 401K matching contributions, health, dental, vision, disability and life insurance. Want to be a part of a team that encourages your innovation and values your abilities? Then Contact UNEW Today!

UNEW, Inc., formerly ETS Power Group, Inc. has been on the forefront of the Gas Turbine Engine OEM Replacement parts industry since 1999. Our success in the industry is a product of advanced knowledge and experience along with innovative concepts and efficient modification through design and quality control. Please visit our website at ************* At UNEW, we know our team is the reason for our success and we are highly selective when it comes to recruiting. Our company consists of “all-stars” in every department, at every level and has maintained a corporate culture aimed to empower, educate and value each team member's opinion and promote and create visionary ideas. The Senior Modeler-Drafter will play a critical role in supporting engineering activities related to part assembly and installation, ensuring the highest standards of quality and precision. Responsibilities: Collaborate with engineers to assist in the development of part assembly and installation engineering drawings. Create, modify, and check NX models and drawings to meet production requirements. Prepare comprehensive production detail drawings with a focus on accuracy and clarity. Review and implement changes to engineering drawings, ensuring compliance with industry standards and company protocols. Manage multiple projects independently, effectively prioritizing tasks to meet deadlines. Requirements: Associate's degree in a related field or applicable years of experience 5 years of experience in design/drafting Working knowledge of NX 10 or higher Experience with GOM software, a plus. Experience with gas turbines; Gas turbine airfoil experience a plus Due to the nature of our work, you must be a US Citizenship or Green card holder UNEW offers employees an environment that values diversity, strong work ethics, and provides a highly competitive salary, valuable benefits including 401K matching contributions, health, dental, vision, disability and life insurance. Want to be a part of a team that encourages your innovation and values your abilities? Then Contact UNEW Today!

BROWARD COLLEGE MECHANIC APPRENTICE AND AIRCRAFT WASHER INTERNSHIP Internship Opportunity: Mechanic Apprentice and Aircraft Washer Supervising Department: Aircraft Maintenance, reporting to a Licensed A & P Mechanic Target Program at Broward College: Those individuals already on the pathway to Airframe & Powerplant Certification. Role Description: Work under the supervision and guidance of Mechanics of the department to ensure that aircraft are prepared to safely function per regulation. Participate in the Mechanic Apprentice training offered by the department. Participate in internal communication with all other departments related to equipment considerations, product excellence, scheduling issues and required paperwork. Focus on safety by observing self and teammates and being vigilant, report issues and offer suggestions to promote continuous process improvement. Perform the duties required to prepare, clean, wash and apply corrosion preventative so that aircraft are presented in the best possible manner. And other collateral duties as assigned such as inventory control. Value of the Opportunity: Gain real-world experience in the chosen field. Establish a relationship with a potential employer. Acquire skills in and understanding of Cessna 208 Aircraft. Successful evaluation of performance at the Ninety (90) Day milestone, from both Tropic Ocean Airways and a representative faculty member at Broward College, will lead to a conditional job offer. Upon graduation from the Broward College Program the graduate will transition to full-time employment with Tropic Ocean Airways, and accumulated experience on our Amphibious Caravan will translate to a higher pay rate to respect that tenure.

LEAF Engineers is a frontrunner for success in providing comprehensive mechanical, electrical and plumbing, technology, and fire protection engineering design services. Our engineers are focused on system performance, reliability, flexibility, and ease of maintenance. Our work typically consists of large commercial projects, primarily award-winning K-12 schools. With an emphasis on teamwork, we reach beyond the traditional MEP approach to solve problems and integrate a more holistic style to our processes. Within LEAF, you will find a fast-paced environment with many opportunities to learn and accelerate your career. You will help with the design of HVAC systems for commercial and educational facilities including load calculations, air-unit and chiller equipment selections, ductwork, pump and pipe sizing and layout. You would also be responsible for QA/QC construction documents, provide design ideas and solutions, and train or mentor other Designers, Operators or Engineers. Your Impact: • Develop and modify Revit models of plumbing and HVAC systems and components according to established standards • Review Revit modeling techniques, based on input from the engineering team and project managers • Manage the execution of the design for Revit models and AutoCAD documents for multiple projects • Oversee equipment schedules, making changes and adjustments as necessary with input from the engineering team as required • Use Revit to manage the design for interferences with other building elements and resolve conflicts with other team members • Interpret consultant design documents and design the necessary HVAC system • Utilize knowledge of design techniques and principals to mentor and train other designers and engineers involved in the production of plans, sections diagrams, equipment schedules, and drawings. • Organize detailed documentation to track project development and design process • Produce coordinated floor plans, riser diagrams, and isometrics for complex HVAC systems • Monitor installation of equipment and systems to ensure compliance with design specifications and safety codes Here's What You'll Need: • 4-6 years of work experience with an engineering consultant • Bachelor's degree in Mechanical Engineering or related engineering technology degree • Proficient in Revit and AutoCAD • Physical ability and willingness to conduct site inspections and fieldwork, i.e., climb ladders, walk on roofs, etc. • Ability to self-assess and command a high level of accuracy Here's How You'll Stand Out: • Strong oral, written, and communication skills • Excellent time-management and organizational skills • Project experience in K-12 educational market

Benefits: 401(k) 401(k) matching Competitive salary Dental insurance Health insurance Paid time off Vision insurance Job Title: Electro-mechanical Engineer Reports to: Technical Director Overview: Join our dynamic team at Caliber Sales Engineering as an Electro-mechanical Engineer. As an Electro-mechanical Engineer, you will assume a leadership role in our technical team, leveraging your expertise in both electro-mechanical systems and manufacturing processes to oversee the assembly, repair, and optimization of complex machinery and equipment. This multifaceted role requires a strong foundation in electrical and mechanical engineering, coupled with hands-on experience in manufacturing, reverse-engineering, assembly, and repair environments. You will play a critical role in ensuring the functionality, reliability, and quality of electromechanical systems throughout their lifecycle. Prior experience in supporting/maintaining Northrop, Lockheed, or Raytheon radar systems is highly encouraged. Key Responsibilities Assembly and Integration: Design and develop assembly procedures, work instructions, and fixtures for electromechanical systems. Oversee the assembly process, ensuring components are correctly installed and systems are assembled according to specifications. Collaborate with design engineers to ensure designs are optimized for manufacturability and assembly. Repair and Maintenance: Diagnose and troubleshoot electromechanical systems to identify issues and root causes. Perform repairs and replacements of faulty components, ensuring equipment is restored to operational condition. Conduct preventive maintenance to extend equipment lifespan and minimize downtime. Quality Assurance: Develop and implement quality control processes to verify the functionality and performance of assembled systems. Conduct tests and inspections to ensure compliance with industry standards and customer requirements. Implement corrective actions to address quality issues and improve product reliability. Process Optimization: Analyze manufacturing and assembly processes to identify opportunities for improvement in efficiency, quality, and cost-effectiveness. Implement process enhancements and lean manufacturing principles to streamline operations and reduce waste. Continuously monitor and evaluate production metrics to achieve operational excellence. Documentation and Reporting: Maintain detailed documentation of assembly procedures, repair activities, and quality assurance measures. Generate reports on repair activities, equipment performance, and process improvements. Ensure compliance with documentation standards and regulatory requirements. Training and Support: Provide training and technical support to assembly technicians and repair personnel. Foster a culture of safety, quality, and continuous improvement within the assembly and repair team. Qualifications Education & Experience: Bachelors degree in Electrical Engineering, Mechanical Engineering, or a related field. Relevant certifications in electromechanical systems, manufacturing, or repair are advantageous. Equivalent work or military experience is also considered. Proven experience in electromechanical assembly, repair, and maintenance, preferably in a manufacturing or industrial environment. Strong knowledge of electrical and mechanical components, systems, and troubleshooting techniques. Hands-on experience with assembly tools, test equipment, and repair procedures. Familiarity with military operations and requirements Veteran with technical experience Experience in radar electronics troubleshooting and repair is advantageous. Knowledge of AC/DC circuits, digital electronics, pneumatics, hydraulics, controls Preferred 5+ years of experience. Experience with retrofitting and updating old architecture with new technology to continue product lifespan Technical Skills: Proficiency in CAD software for designing and analyzing electromechanical systems. Familiarity with PLCs, sensors, actuators, motors, and other electromechanical components. Experience with using 3D printers and CNC machines for modifying existing products and new product development Ability to interpret technical drawings, schematics, and specifications. Skills: Excellent problem-solving skills and analytical thinking. Strong communication and interpersonal skills for effective collaboration. Detail-oriented with a commitment to quality and continuous improvement. Ability to manage multiple tasks and priorities effectively. Personal Attributes Adaptability: Able to thrive in a dynamic environment with changing priorities and deadlines. Leadership: Capable of taking initiative and leading projects to successful completion. Team Player: Collaborative and supportive of colleagues across different disciplines. Innovative Thinking: Creative in proposing and implementing process improvements and solutions. Results-Driven: Motivated to achieve operational efficiency and deliver high-quality repairs and assemblies. US Citizen With ability to obtain Security Clearance This role offers an exciting opportunity for a skilled engineer with a passion for electromechanical systems and hands-on problem-solving. If you are ready to contribute your expertise to a team committed to excellence in manufacturing and repair, we encourage you to apply and join our organization. Full Time, On Site Equal Opportunity Statement: Caliber Sales Engineering is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, age, or any other federally protected class. Disclaimer: This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities required of the employee. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description About the Role: Position Overview The Systems Engineer (Mechanical) is responsible for the design, analysis, and integration of mechanical and structural systems across complex maritime platforms. This role requires a systems-level mindset with strong mechanical engineering expertise, supporting projects that involve mechanical interface integration with electrical and communications systems. Key Responsibilities Requirements Analysis & System Design • Perform system-level requirements analysis, decomposition, and allocation for mechanical and structural systems. • Translate customer and MIL-STD specifications into mechanical design criteria and system architecture. • Develop performance and environmental requirements (shock, vibration, noise, thermal, fluid flow). System Architecture Development • Develop and evaluate mechanical system architectures • Model mechanical system performance and ensure integration with electrical and control systems. • Optimize design for manufacturability, maintainability, and shipboard installation. Integration & Interface Management • Manage mechanical interfaces across systems - including mounting structures, thermal management, piping, and cable routing. • Develop Interface Control Documents (ICDs), installation drawings, and 3D models showing integrated mechanical layouts. • Collaborate with electrical, controls, and software teams to ensure cohesive system integration. Testing, Verification, & Validation • Develop test procedures and support system-level verification and validation for mechanical and environmental performance. • Participate in integration, commissioning, and acceptance testing onboard ships or at test facilities. • Conduct root-cause analyses and corrective actions for mechanical or thermal anomalies. Compliance & Risk Management • Ensure compliance with maritime and defense standards (MIL-STD-901D, MIL-STD-167, ABS, DNV, etc.). • Support configuration and risk management throughout the product lifecycle. • Conduct reliability, maintainability, and safety analyses (FMEA, fault tree analysis, hazard assessment). Documentation & Reporting • Prepare mechanical design documentation, test reports, analysis packages, and installation procedures. • Support design reviews, technical interchange meetings (TIMs), and customer technical audits. Collaboration & Technical Leadership • Work cross-functionally with electrical, software, manufacturing, and field service teams to deliver integrated maritime solutions. • Provide mentorship and technical guidance to junior engineers and designers. • Interface with shipyards, customers, and government stakeholders during design, production, and installation phases. Qualifications Education: • Bachelor's degree or higher in Mechanical Engineering, Systems Engineering, or related STEM field. Experience: • 3+ years of relevant experience in mechanical or systems engineering, preferably in maritime, defense, or shipbuilding industries. • Proficiency with CAD and modeling tools (e.g., SolidWorks, Creo, NX, or AutoCAD). • Experience with FEA and thermal/structural analysis tools • Knowledge of materials selection, corrosion control, and environmental design for marine applications. • Understanding of fluid dynamics, thermodynamics, and vibration/shock requirements in shipboard environments. Other Requirements: • U.S. Citizenship required. • Ability to obtain and maintain a DoD Secret (or higher) security clearance. • Excellent technical communication, documentation, and teamwork skills. • Willingness to travel to shipyards, test sites, or customer facilities as needed Skills: The required skills will be utilized daily as you engage in system design and troubleshooting, ensuring that you can effectively analyze and resolve issues. Your programming knowledge will be essential for developing scripts and automating processes, enhancing system efficiency. Familiarity with operating systems and networking will allow you to monitor and maintain system performance proactively. Preferred skills, such as cloud computing knowledge, will enable you to contribute to modern system architectures and solutions. Overall, a combination of these skills will empower you to collaborate effectively with team members and deliver high-quality engineering solutions.

About RYAM RYAM is a global leader of cellulose-based technologies, including high purity cellulose specialties, a natural polymer commonly found in filters, food, pharmaceuticals and other industrial applications. The Company also manufactures products for paper and packaging markets. With manufacturing operations in the U.S., Canada and France, RYAM employs approximately 2,500 people and generates approximately $1.4 billion of revenues. More information is available at ********************** RYAM's intellectual property and manufacturing processes have been developed over 90 years, resulting in unique properties and very high quality and consistency. RYAM is consistently ranked among the nation's top 50 exporters and delivers products to 79 ports around the world, serving customers in 20 countries across five continents. At RYAM, we're shaping the future of talent. RYAM has a specific purpose… to be the world's leading manufacturer of renewable products, including paper, packaging, and high purity cellulose. We want smart, innovative people who can find new ways to solve challenging problems. We need talented professionals across multiple disciplines who want to contribute to the company's mission and advance its vision, while also shaping its future. How you'll shape the future of the Engineering area: * Prepare in-depth feasibility studies, project appropriation requests, economic analysis and cost estimates for additions and modifications. * Work with consultant engineering firms to develop larger and more complex projects while managing costs. * Prepare or supervise preparation of drawings for assigned capital and other projects. * Participate with project teams in selecting equipment and material for new plant facilities and modifications. * Prepare and analyze equipment and contract specifications, bid packages and make recommendations. * Assist other Project Engineers in own field of experience and engineering. * Supervise contractors' field work. * Advise maintenance supervision on field work of assigned projects. * Coordinate with purchasing, traffic and receiving for delivery of new equipment and materials. Successful completion of all phases of assigned projects within authorized costs. * Investigate various types of equipment problems involving selection of material, improvement of equipment, and repair versus replacement analyses. * Inspect plant facilities, such as boilers, tanks, piping, and process equipment during shutdowns. * Inspect equipment deterioration and failures and recommend actions required to reduce or eliminate failures and ensure safe condition of potentially hazardous equipment. * Ensure that all phases of project work are properly documented, i.e., project costs, equipment manuals and drawings, material certifications, etc. * Procure spare parts and coordinate training for mechanics and operators as needed for new equipment and systems. * Ensure projects incorporate ergonomic consideration and are designed for safe operation. Additionally, responsible for contractor safety on project work. * May have responsibility for supervision of drawings and drafting. * May perform other duties as assigned depending upon the needs of the business. You'll be someone who can bring: * Bachelor of Science Degree in Engineering - Mechanical or Chemical preferred. * Three to five years engineering experience with preference in pulp/paper industry. * Experience managing engineering related projects is mandatory. * Specialized knowledge of process design, plaint maintenance practices, and project management. * Must be able to take a project from inception to completion with minimal supervision. * Capable of providing technical assistance and direction to interdisciplinary engineering personnel. Why you'll love working for RYAM: * Competitive pay * Medical, Dental, Vision * Short term / Long term disability * Paid Parental Leave * Bonus / Merit * Life insurance (Company paid & Voluntary) * Company paid Employee Assistance Program (EAP) * Tuition reimbursement * Wellness reimbursement * Retirement plan EOE/Vet/Disability

Job DescriptionBenefits: Competitive salary Dental insurance Health insurance Opportunity for advancement Paid time off Training & development The Powerplant Engineer develops and drives technical improvements within our shop process, develops repair capability through tooling design and testing systems, coordinates and investigates out of scope findings and measurements including 3D and 4D measurement systems. Liaison with customer and OEM engineers on repair scopes and Engineering deviations. Responsibilities and Duties (included but not limited to): Measurement, documentation and reporting on out of scope findings on engines and parts Repair development, design and documentation Assists production line Inspectors with work scope processing, the input of non-routines and assurance of necessary tooling and data requirements. Research technical data, tooling, drawings, and parts requirements for future capability and capacity expansion. Assist QA with technical data research, technical records, material traceability, tooling and parts requirements. Track documentation during creating, review and approval processes and throughout their lifecycle. Produces high quality written reports that detail specific findings, processes and results to meet client expectations, applicable standards, and are appropriate for their intended audience. Liaison with customer service, customers, engineers and staff to achieve our goals Preferred Skill Set: Masters Degree in Aerospace Engineering (preferred) Experience on CFM56 and LEAP engine lines Knowledge and experience of the Civil Aviation MRO Industry Familiar with FAA Part 145 Knowledge of aircraft and engine technical data Excellent communication skills - Strong verbal, written and analytical skills Able to navigate and decipher technical manuals Excellent organizational habits Capable of multitasking Experience using Microsoft Office Suite CAD Design

+ Led substation engineering projects from early-stage development through construction and commissioning, ensuring full compliance with interconnection, technical, and regulatory requirements. + Coordinated multidisciplinary engineering, external EOR teams, procurement, permitting, and utility/ISO stakeholders to deliver safe, cost-effective, and on-schedule substation designs and installations. **Responsibilities:** + All assigned substation projects from conception (Early Stage) through construction and commissioning (Execution). + In the conceptual phase, you will work with the Early-Stage Project Manager to support the engineering requirements and scope with the Development Group. + Training, due diligence, and technical oversight of external engineers of record (EOR) for all assigned substation projects to ensure compliance with required generation interconnection agreements, scope of work documents, project specifications, site specific design requirements, IEEE, NESC, ASCE and all other applicable industry codes and standards. + Securing engineering consulting resources from a list of approved suppliers by developing a scope of work, securing bids, evaluating, and awarding work through NEER's Integrated Supply Chain (ISC) Group. + Coordinate with other project stakeholders to develop and secure a substation site, support any engineering updates, data and permits necessary to design and build the substation. + Competitively source, select and contracting geotechnical, survey, engineering, and construction services, and supporting the E&C Cost Estimating Team with scope assumptions. + Coordination with other groups to ensure that the assigned E&C substation projects are successful. Generally responsible for representing E&C's internal and external interests on assigned projects, including presentations/briefing on current progress, issues, and risk mitigation in meetings with various levels of management. + Support Transmission Services during review of interconnection documentation including system impact studies, facility studies, reactive and harmonic studies and Interconnection agreements and ensures that Transmission Owner requirements and E&C engineering design are consistent and in compliance with all ISO requirements and incorporated into the project design. + Must be able to work with and communicate often to the respective transmission owners/operators/ISOs to ensure project deliverables will meet specific off-taker requirements, are timely and accurate. + Manage all project long lead major material orders to minimize risk of delays or exceeding the project budget. Assists ISC with all substation project SOW creation, review, approval, and preparation of shopping carts for engineering services and materials in a timely manner. + Support E&C Estimating with template update via project feedback, technical support, and scope modifications. + Works collaboratively with project engineering resources in various disciplines to determine project priorities, work plans and lines of demarcation. + Ensures projects are efficiently, cost effectively and safely implemented in accordance with department process, procedures, industry standards and policies. + Support assigned project commissioning activities to meet corporate objectives. + Support Legal in any regulatory filings, depositions and/or hearings. + Collaborate with component OEMs to enhance/adapt their designs to better integrate with NEER's philosophies. **Experience:** + Experience with substation projects from conception (Early Stage) to (Execution). **Skills:** + Clear communication, root-cause analysis, and documentation skills. **Education:** + Bachelor's degree **About US Tech Solutions:** US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit *********************** (********************************** . US Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, colour, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Ames Construction has built America for more than 60 years, and the exceptional people who make up our team are a vital factor in our success. We are a full-service, heavy civil and industrial general contractor that brings innovative solutions to many market segments, from highway and bridge construction to mining and rail. Ames is an employee-owned company that retains its entrepreneurial spirit while offering the experience and stability of a proven construction industry leader. Equipped with our core values of People, Team, Our Bond, Persistence, and Vision, we make communities across the U.S. safer, keep supply chains moving, and lay the groundwork for a sustainable future. By joining Ames, you will be working with talented colleagues at an award-winning, nationally recognized top 65 general contractor. We are seeking a motivated Project Engineer to join our team in the heavy civil construction industry. This role is ideal for individuals passionate about infrastructure development and eager to gain hands-on experience in managing large-scale projects such as highways, bridges, utilities, and site development. Key Responsibilities * Assist Project Managers and Superintendents with daily project operations. * Review and interpret project plans, specifications, and contract documents. * Track project progress, prepare reports, and maintain accurate documentation. * Coordinate with subcontractors, suppliers, and internal teams to ensure timely delivery of materials and services. * Support quality control and safety compliance on job sites. * Assist in cost tracking, budgeting, and schedule updates. * Participate in problem-solving and provide technical support during construction activities. Qualifications * Education: Bachelor's degree in Civil Engineering, Construction Management, or related field. * Experience: Internship or co-op experience in construction preferred but not required. * Strong understanding of construction principles and project management fundamentals. * Proficiency in Microsoft Office Suite; familiarity with scheduling software (e.g., Primavera P6) is a plus. * Excellent communication, organizational, and analytical skills. * Ability to work in a fast-paced environment and adapt to changing priorities. * Must have a valid Driver's License. Ames Construction is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. This position requires ensuring compliance with CMMC, FAR, and Accounting Standards in all Federal efforts.

We are seeking to add a Mechanical Design Engineer to our R&D team. The role involves carrying out product development projects and providing support for completed products. We are looking for candidates with strong mechanical engineering experience who can thrive in a dedicated, innovative, and fast-paced work environment. Responsibilities + Collaborate with the engineering manager and fellow engineers on new product development projects. + Perform engineering calculations and analyses, and create design drawings. + Develop quality control and testing documents, and collect data on prototypes. + Communicate with operations and production teams on manufacturing requirements and provide necessary engineering support. + Gather user requirements and product feedback. + Monitor product performance and manage design updates after new products are released. Essential Skills + Bachelor's degree in Mechanical Engineering. + Strong proficiency in CAD software, specifically SolidWorks and/or AutoCAD. + Ability to multi-task and work effectively in a fast-paced environment. + Motivated and responsible individual. + FEA experience using Ansys ideally + Testing and prototype development. Work Environment The work environment is innovative and fast-paced, requiring strong collaboration with team members. The role involves using advanced CAD software such as SolidWorks and AutoCAD, along with performing various engineering tasks. The dress code is professional, and the environment is dedicated to fostering innovation and product development. Job Type & Location This is a Contract to Hire position based out of Coral Springs, FL. Pay and Benefits The pay range for this position is $35.00 - $55.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Coral Springs,FL. Application Deadline This position is anticipated to close on Jan 1, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

REQUIRES CANDIDATE RESIDENCY IN THE SOUTH FLORIDA AREA. Qualifications and Expectations: Minimum of 5 years' experience in HVAC and/or Plumbing BUILDING Systems Design, only considered for if experience is in these fields. Expected to immediately step in to assist and provide support for all design aspects of assigned projects. Shows a strong understanding of the HVAC engineering discipline and can provide immediate support for a fast-paced department. Must have working knowledge of AutoCAD MEP and/or Revit. Self-motivated, ability to learn quickly, accept responsibilities and take on new challenges as presented. Job Responsibilities Expectations: Perform project and drawing set up tasks in Revit and AutoCAD by creating discipline specific drawing sheet using the architectural base files Independently and accurately produce basic, intermediate, and advanced level mechanical/HVAC designs using AutoCAD and/or Revit in accordance with project scope Ability to carry out design project from design narrative thru permit drawing submission Independently and accurately prepare HVAC engineering calculations required to design plumbing systems, including sizing of source equipment and distribution systems Apply international and local building codes to assist in producing code compliant design documents Participate and provide QAQC review of design documents for your discipline of proficiency Lead and manage projects independently by communicating directly with clients to coordinate and align on scope of work Cross-functionally communicate with other engineering disciplines and team members to coordinate where they intersect Attend project meetings as need to ensure scope of work understanding Conduct site visits to survey and capture existing conditions and author report that illustrate and describe observations and findings Communicate effectively with clients and internal team members in the design and specification development of plumbing building systems Execute construction administration duties which include first level responses to RFI and Submittal review under supervision of senior engineering staff Attend and participate in engineering industry training, events, and/or continuing education to stay current on latest engineering concepts and technologies Qualifications: Must have at least 5 years of HVAC design experience in a relevant field of design, MEP preferred. Must be proficient in Revit, AutoCAD, & Bluebeam Bachelor's Degree in Engineering from an accredited 4-year/university preferred.

Benefits: 401(k) 401(k) matching Competitive salary Dental insurance Health insurance Paid time off Vision insurance Job Title: Electro-mechanical Engineer Reports to: Technical Director Overview: Join our dynamic team at Caliber Sales Engineering as an Electro-mechanical Engineer. As an Electro-mechanical Engineer, you will assume a leadership role in our technical team, leveraging your expertise in both electro-mechanical systems and manufacturing processes to oversee the assembly, repair, and optimization of complex machinery and equipment. This multifaceted role requires a strong foundation in electrical and mechanical engineering, coupled with hands-on experience in manufacturing, reverse-engineering, assembly, and repair environments. You will play a critical role in ensuring the functionality, reliability, and quality of electromechanical systems throughout their lifecycle. Prior experience in supporting/maintaining Northrop, Lockheed, or Raytheon radar systems is highly encouraged. Key Responsibilities Assembly and Integration: Design and develop assembly procedures, work instructions, and fixtures for electromechanical systems. Oversee the assembly process, ensuring components are correctly installed and systems are assembled according to specifications. Collaborate with design engineers to ensure designs are optimized for manufacturability and assembly. Repair and Maintenance: Diagnose and troubleshoot electromechanical systems to identify issues and root causes. Perform repairs and replacements of faulty components, ensuring equipment is restored to operational condition. Conduct preventive maintenance to extend equipment lifespan and minimize downtime. Quality Assurance: Develop and implement quality control processes to verify the functionality and performance of assembled systems. Conduct tests and inspections to ensure compliance with industry standards and customer requirements. Implement corrective actions to address quality issues and improve product reliability. Process Optimization: Analyze manufacturing and assembly processes to identify opportunities for improvement in efficiency, quality, and cost-effectiveness. Implement process enhancements and lean manufacturing principles to streamline operations and reduce waste. Continuously monitor and evaluate production metrics to achieve operational excellence. Documentation and Reporting: Maintain detailed documentation of assembly procedures, repair activities, and quality assurance measures. Generate reports on repair activities, equipment performance, and process improvements. Ensure compliance with documentation standards and regulatory requirements. Training and Support: Provide training and technical support to assembly technicians and repair personnel. Foster a culture of safety, quality, and continuous improvement within the assembly and repair team. Qualifications Education & Experience: Bachelor's degree in Electrical Engineering, Mechanical Engineering, or a related field. Relevant certifications in electromechanical systems, manufacturing, or repair are advantageous. Equivalent work or military experience is also considered. Proven experience in electromechanical assembly, repair, and maintenance, preferably in a manufacturing or industrial environment. Strong knowledge of electrical and mechanical components, systems, and troubleshooting techniques. Hands-on experience with assembly tools, test equipment, and repair procedures. Familiarity with military operations and requirements Veteran with technical experience Experience in radar electronics troubleshooting and repair is advantageous. Knowledge of AC/DC circuits, digital electronics, pneumatics, hydraulics, controls Preferred 5+ years of experience. Experience with retrofitting and updating old architecture with new technology to continue product lifespan Technical Skills: Proficiency in CAD software for designing and analyzing electromechanical systems. Familiarity with PLCs, sensors, actuators, motors, and other electromechanical components. Experience with using 3D printers and CNC machines for modifying existing products and new product development Ability to interpret technical drawings, schematics, and specifications. Skills: Excellent problem-solving skills and analytical thinking. Strong communication and interpersonal skills for effective collaboration. Detail-oriented with a commitment to quality and continuous improvement. Ability to manage multiple tasks and priorities effectively. Personal Attributes Adaptability: Able to thrive in a dynamic environment with changing priorities and deadlines. Leadership: Capable of taking initiative and leading projects to successful completion. Team Player: Collaborative and supportive of colleagues across different disciplines. Innovative Thinking: Creative in proposing and implementing process improvements and solutions. Results-Driven: Motivated to achieve operational efficiency and deliver high-quality repairs and assemblies. US Citizen - With ability to obtain Security Clearance This role offers an exciting opportunity for a skilled engineer with a passion for electromechanical systems and hands-on problem-solving. If you are ready to contribute your expertise to a team committed to excellence in manufacturing and repair, we encourage you to apply and join our organization. Full Time, On Site Equal Opportunity Statement: Caliber Sales Engineering is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, age, or any other federally protected class. Disclaimer: This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities required of the employee. Duties, responsibilities, and activities may change at any time with or without notice. Caliber's History Caliber Sales Engineering is a woman Owned Small Business founded in 1987. CSE was established as an export management company located in South Florida, USA. For more than 30 years Caliber Sales Engineering has grown significantly and provided support to both US and international end users with spares, repairs, system upgrades, onsite management, manpower, and other services. We have provided our services to both commercial and military clients. CSE has long established relationships with OEMs, manufacturers, and aftermarket repair facilities located in the US and globally to support our clients. With offices both in the US and in the Middle East we understand how to remain relevant in a constantly changing global environment. Over the last few years CSE has continued to develop and grow our in-house manufacturing and repair capabilities to include Form Fit & Function, upgrade, and the refurbishment focusing on military components. In addition, CSE has expanded capabilities to include the design and manufacture of power storage solutions. Caliber Sales Engineering is ISO 9001:2015 Registered, AS9100D & AS9120B Compliant and TRACE certified, we understand how important quality is and strive for continuous improvement Celebrating over 30 years in business! Our mission is to offer quality products and services at competitive prices with on-time scheduled deliveries. What distinguishes Caliber is our proven track record of achieving customer satisfaction through exceeding contract excellence by engaging with our customer and providing creative and innovative solutions and reducing our clients total cost of ownership, resulting in increased fleet and operational readiness.