Mechanical design engineer jobs in Pensacola, FL - 79 jobs

We are Engineering the Future Only 30 minutes from Mobile Bay and just an hour from the pristine white sand beaches of Alabama's Gulf Coast, your next career move could come with a view! Join Kaishan Compressor USA in Loxley, Alabama at our US Headquarters where we design and engineer high quality rotary screw air compressors that are driving a more energy efficient future. Our 100,000 square foot state-of-the-art facility is climate controlled and is an engineer's dream with a brand-new R&D area. Please note this role is an in-person role at our Loxley Headquarters and is not eligible for remote work. Day To Day: Design the screw compressor system and system components, such as the inlet filter, oil separator, oil cooler, oil filter, after-cooler, air or gas piping system, oil piping system and related pneumatic and fluid dynamic controls etc. This design shall include the related heat balance analysis, fluid dynamic analysis, strength analysis and any other necessary analyses. Complete the P&ID or flow schematic drawings for any compressor packages. The flow schematic drawing shall be supported by the necessary calculation and analysis. Work with suppliers to specify and select any required mechanical component. Complete the detailed layouts for the compressor packages. Perform the design work with designer(s) as necessary. Review and check the drawings completed by designers and take the responsibility for the design. Design the compressor canopies and compressor skids. Understand the engineering economics and conduct the efficiency and cost and reliability analysis. Apply the theory of screw compressors and their systems and develop the experience and knowledge to support the compressor applications and production. Complete the Bill of Materials (BOM) for compressor systems. Actively involve the product innovation team and communicate any necessary information from the end users for the purpose of the product innovation. Complete any mechanical engineering related tasks assigned by his or her supervisor. Perform follow- up tests in the R&D area. Assist the Quality Department in the field quality resolution process. Conduct some small design projects. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. What We Believe In: Performing quality work within deadlines with or without direct supervision. Interacting professionally with other employees, customers, and suppliers. Working effectively as a team contributor on all assignments. Working independently while understanding the necessity for communicating and coordinating work efforts with other employees and organizations. Always work safely and report any unsafe conditions. We are all responsible for Safety! About You: Thinking of applying? See if this sounds like you: Bachelor's or master's degree in mechanical engineering or industrial engineering. Minimum 5 years of experience with compressors or a related field. Knowledge of thermodynamics, heat transfer, fluid dynamics, mechanics of materials, fabrication processes, sound and vibration principles, and sheet metal and structural. Knowledge and/or experience in compressors and their systems is a plus. Ability to use 3D CAD (Solid Works a plus) Knowledge of product structures and costing methods. Must be creative, innovative, cost driven, have good hands-on practical mechanical skills and be able to work in a team environment. Strong attention to detail Able to collaborate with members from different teams within the organization. Really Good Benefits: We offer Medical, Dental, Vision, Vacation and Sick Time-Off, Short and Long-Term Disability, Life Insurance, Tuition Reimbursement, Matching 401K match of 6% and an Amazing Profit-Sharing Program! Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

At Zone 5 Technologies, we're redefining what's possible in unmanned aircraft systems. Our team of engineers and innovators is developing cutting-edge autonomous solutions that push the boundaries of UAS technology - solving complex challenges that matter. We're building the future of UAS capabilities, and we're looking for exceptional talent to join us. If you're driven by hard problems, energized by rapid innovation, and ready to make an impact on next-generation flight systems, you belong here. We're looking for an experienced Mechanical Engineer responsible for the design, development, modification, and optimization of mechanical systems for a variety of weapon systems and other aerospace applications. This role focuses on creating innovative and reliable mechanical designs and components while ensuring their structural integrity, performance, and compliance with industry standards. The engineer will work with cross-functional teams to advance technologies in sectors such as defense, commercial aviation, and space exploration. Responsibilities: Design and Development: Design mechanical components and systems for UAS, weapon systems, and other aerospace vehicles, including airframes, propulsion systems, control surfaces, landing gears, and payload integration. Prototyping and Testing: Build and test prototypes to ensure mechanical reliability and performance, including ground and flight tests to validate designs. Structural Analysis: Conduct stress, strain, and fatigue analysis on structures and systems to ensure they can withstand operational conditions such as high speeds, altitudes, and varying temperatures. Thermal Management: Design and analyze thermal systems to manage heat dissipation, especially for high-performance aerospace applications. System Integration: Collaborate with electrical, avionics, and software engineers to integrate mechanical systems with sensors, communication, and control systems in unmanned aircraft. Material Selection: Evaluate and select lightweight, high-performance materials, optimizing for fuel efficiency, durability, and strength. Failure Analysis: Perform root cause analysis on mechanical system failures and develop solutions to enhance the safety and performance. UAV Maintenance and Repair Procedures: Develop guidelines for the inspection, maintenance, and repair of mechanical systems to ensure long- term operational efficiency. Regulatory Compliance: Ensure all designs meet relevant regulations and industry standards. Engage in R&D for cutting-edge unmanned technologies, including autonomous systems, additive manufacturing, and advanced composite materials. Documentation: Create detailed reports, design specifications, maintenance manuals, and testing documentation for mechanical systems. Qualifications: Education: Bachelor's or Master's degree in Mechanical Engineering, Aerospace Engineering, or a related field. Experience: 3-7 years of experience in aerospace mechanical systems, including 2+ years working on unmanned aircraft, weapon systems, or other relevant systems. Skills: Proficiency in CAD and mechanical design software (e.g., SolidWorks) for aerospace applications. Proficiency in detailed design including geometric dimensioning and tolerancing (GD&T) and drafting. Experience with design for manufacturability (DFM) and tooling design. Experience with finite element analysis (FEA), computational fluid dynamics (CFD), and other simulation tools. Strong knowledge of fluid dynamics, thermodynamics, structural mechanics, and aerodynamics. Understanding of aerospace manufacturing processes, including 3D printing and advanced composite materials. Familiarity with UAV-specific regulations and broader aerospace certification processes (e.g., DO-160, AS9100). Strong analytical, problem-solving, and project management skills. Pay range for this role$115,000-$150,000 USD What's in it for you: Benefits: Competitive total compensation package Comprehensive benefit package options include medical, dental, vision, life, and more. 401k with company-match 4 weeks of paid time off each year 12 annual company holidays Why Join Zone 5 Technologies? Innovative Environment: Work on cutting-edge technology that is shaping the future of defense and aerospace. Collaborative Culture: Join a team of passionate professionals dedicated to pushing the boundaries of what's possible. Career Growth: Opportunities for professional development and career advancement. If you are passionate about unmanned aircraft technology and want to be a part of a dynamic and growing company, we would love to hear from you. Apply today and join the Zone 5 Technologies team! Note about our Texas roles: we are in the process of opening a location on the mid-west side of the DFW metro region. Roles in Texas will initially work remotely and then be expected to be onsite when that location opens in 2026. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire. Zone 5 Technologies is a federal contractor and participates in E-Verify to confirm employment eligibility. As required by law, we will verify the identity and employment authorization of all new employees using the E-Verify system. Learn more about your rights and responsibilities under E-Verify: *************************

In business since 2000, LanceSoft is a nationally certified Minority Business Enterprise (MBE) that has established itself as a pioneer in providing highly scalable, cost-effective workforce solutions to a diverse set of customers across various industries in the United States. Headquartered in Virginia, LanceSoft currently operates out of several locations in the US and Canada. Job Description •Ability to create and update AUTOCAD drawings. •Ability to create 3D models using additive manufacturing equipment. •Ability to revise engineering drawings from basic layouts, established references, notes and discussions with engineers, and standard data. •Utilize computer-aided design equipment and/or manual tools. •Complete layout drawings prepared by others in accordance with standard engineering drafting practices or may develop complete major layouts of engineering drawings. •Prepare detailed drawings; contributes design modifications (as needed) to improve quality of product. •Technical knowledge and experience with AutoCAD software and CAD standards required. •Ability to prioritize multiple projects/tasks and respond to the needs of multiple project managers. •Requires knowledge, skills associated with the mechanical and electrical disciplines. •Well versed in developing mechanical drawings. •Understanding of and experienced in proper drawing dimensioning. •Understanding of and experience in proper weld nomenclature. •Ability to work as part of a team in a fast paced environment with critical deadlines •Professional, dependable, and results oriented. •Ability to follow simple oral or written instructions. •Strong organizational skill and detail oriented. •Strong oral and written communication skills. •Good problem solver with the ability to identify alternative solutions. •Perform additional duties as assigned by manager. Qualifications Qualifications/Minimum Requirements: •High School Diploma or equivalent. Associated degree preferred. •3+ years of AutoCAD (AutoDesk) experience or other CAD software. •2+ years of Solidworks experience or other 3D Modeling software. •Valid driver's license. •Strong Mechanical aptitude. •Must be self-directed. Additional Information Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, gender Identity, sexual orientation, national origin, age, disability, veteran status, pregnancy, or other status protected by law. We wish to thank all applicants for their interest and effort in applying for this position, however, only candidates selected for interviews will be contacted. No unsolicited agency referrals please.

Primary location: Pensacola, Florida Employment status: Full-Time Travel: The estimated base salary range for this role is “$100,000 to $135,000” per year. Individual pay is based upon location, skills and expertise, experience and other relevant factors What does it mean to work at Armstrong? It means being immersed in a supportive culture that recognizes you as a key player in Armstrong's future. We are a large company with a local feel, where you will get to know and collaborate with leadership and your colleagues across the company. By joining us, you'll have the opportunity to make the most of your potential. Alongside a competitive remuneration package, you will receive: A benefits package including: medical, dental, prescription drug, life insurance, 401k match, long-term disability coverage, vacation and sick time, and many more. Personal development to grow your career with us based on your strengths and interests. A working culture that balances individual achievement with teamwork and collaboration. We draw on each other's strengths and allow for different work styles to build engagement and satisfaction to deliver results. Under the general supervision of the Reliability Engineering Manager, this position is responsible for providing mechanical engineering support relating to the manufacturing equipment and processes. This includes providing daily technical support for the Value Streams, identifying and executing process improvement and cost reduction opportunities, and the designing and installation of capital projects. Projects are generally moderate to significant in both scope and technical complexity. What's in it for you? Gain ownership of critical equipment and processes while leading impactful capital projects. Collaborate with cross-functional teams to solve problems and improve plant reliability. Expand technical expertise and leadership skills with opportunities to transfer knowledge and manage contractors. What does a Project Engineer do? Provides technical assistance on a proactive basis. Actively participating as a Value Stream Team member to drive resolution of common cause and special cause issues that negatively impact Plant Reliability. Investigates problems in operations and recommending corrective action. This includes consulting with production personnel, analyzing the supporting data, recommending corrective action, and following through on recommendations to evaluate their effectiveness. Owns certain critical equipment, systems, and processes within the Plant. Serves as the plant contact for AWI Capital Project teams assigned to the Pensacola Plant to represent the needs of the plant to AWI Capital and communicating critical issues needing resolution back to the Plant. Executes capital projects per agreed cost, schedule, and performance. Applies Precision Maintenance concepts and principles to all work performed in the plant. Transfers technical knowledge where appropriate to other plant personnel to elevate organization understanding and performance. Value Added Activities (% Time Spent) 25% Owner of Critical Equipment, Systems, and Processes 25% Supporting Plant Productivity and Objectives 50% Execution of Capital Projects Supervisory Responsibilities Manage contractors and technicians performing work on your individual projects Required Qualifications B.S. Degree in Mechanical/Chemical Engineering from ABET Accredited College or University 5-7 years of engineering experience in a manufacturing environment preferred Demonstrated experience managing capital projects of up to $500,000 Hands-on experience with industrial dust collection and combustion systems AutoCAD/Inventor skills SAP knowledge What will make you stand out? EIT or FE Certifications Professional Engineer License Minitab knowledge Fusion 360 knowledge Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Climbing stairs and on platforms around machinery. Working in potential hot and humid environments for extended periods of time. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Why should you join Armstrong World Industries? Armstrong World Industries (AWI) is an Americas leader in the design and manufacture of innovative interior and exterior architectural applications including ceilings, specialty walls and exterior metal solutions. With approximately $1.4 billion in revenue, AWI has about 3,700 employees and a manufacturing network of 21 facilities in North America. At home, at work, in healthcare facilities, classrooms, stores, or restaurants, we offer interior solutions that help to enhance comfort, save time, improve building efficiency and overall performance, and create beautiful spaces. For more than 160 years, we have built our business on trust and integrity. It set us apart then, and it sets us apart now, along with our ability to collaborate with and innovate for the people we're here to serve - our customers, our shareholders, our communities and our employees. We are committed to developing new and sustainable architectural solutions, with design and performance possibilities that make a positive difference in spaces where we live, work, learn, heal and play. It's an exciting, rewarding business to be in, and we're committed to continue to grow and prosper for the benefit of all of our stakeholders. We hope you join us. Our Sustainability Ambition "Bringing our Purpose to Life" - lead a transformation in the design and building of spaces fit for today and tomorrow. We are committed to: Engaging a diverse, purpose-driven workforce; Transforming buildings from structures that shelter into structures that serve and preserve the health and well-being of people and planet; Pursuing sustainable, innovative solutions for spaces where we live, work, learn heal and play; Being a catalyst for change with all of our stakeholders; and Making a positive difference in the environments and communities we impact. Armstrong is committed to engaging a diverse, purpose-driven workforce. As part of our dedication to diversity, AWI is committed to Equal Employment Opportunity and all qualified applicants receive consideration for employment without regard for race, sex, color, national origin, ethnicity, gender, protected veteran status, disability, sexual orientation, gender identity, or religion. We are also committed to providing reasonable accommodations for qualified individuals with disabilities and disabled veterans in our job application procedures. If you need assistance or an accommodation due to a disability, you may contact us at by email at AWI talent acquisition and let us know the nature of your request and your contact information. Requests for accommodation will be evaluated on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this email address. Come and build your future with us and apply today! #LI-NR1

Job Title: Project Engineer- Tyndall AFB ***Work Location: Panama City, FL*** Salary: Based on experience and will be discussed with manager in interview REQUIREMENT- Must be a US Citizen and must pass a federal background review and drug screen Duties/Responsibilities: Responsible for observation and reporting on assigned projects to government personnel. Oversees construction, contract administration, and quality assurance activities in accordance with established policies, procedures, and regulations. Analyzes design and construction issues with respect to contract requirements. Delivers recommendations regarding compliance to contract provisions and exercises engineering judgment to assist in the development of solutions between conflicting plan details or requirements which become evident as construction progresses. Make technical interpretations of drawings and specifications; provide engineering determinations on meeting the contract requirements. Review submittals, respond to contractor questions, RFIs, construction deficiencies, project issues, requests for equitable adjustment, and claims. Assist in preparing documents for change orders and claims. Reviews schedule items and pay applications to ensure balance with percentages for each corresponding work feature or component of work. Reviews contractor's submittals including QA and Safety Plans. Provides field surveillance and delivers daily detailed reports. Reviews drawings and specifications. Assists in preparation of scope of work modifications and cost estimates. Provides safety oversight. Utilize Resident Management System (RMS). Education/Experience: Bachelor's Degree in related field 10 years of experience on large complex multimillion dollar federal construction projects, preferably Department of Defense Facilities experience with administrative buildings, airfield facilities and apron, barracks, water and electrical systems, and roadways. Experience with Three-Phase QC/Inspection process Experience preferred EM 385-1-1 USACE Safety Manual Experience with Resident Management System (RMS) Benefits: Competitive salary based on experience. Comprehensive health, dental, and vision insurance. Retirement savings plan with company match. Paid time off and holidays. Professional development and career advancement opportunities. A supportive and collaborative work environment. Equal Opportunity Employer (U.S.) all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristic protected by law. Accura uses E-Verify in its hiring practices to achieve a lawful workplace. *******************

Job DescriptionTransportation Project Engineer Thompson Engineering has an immediate opening for a Transportation Project Engineer to join our growing team in Mobile, Daphne, or Orange Beach, Alabama. This position is ideal for a motivated roadway design professional seeking growth into a project engineer role within a collaborative, employee-owned firm. At Thompson Engineering, we aspire to be the firm of choice by driving success for our clients, employees, and the communities we serve. We provide a broad range of engineering and related services across multiple markets throughout the Southeast, guided by our core values of integrity, safety, performance, ownership, teamwork, innovation, entrepreneurial spirit, and professionalism. Our culture supports self-driven engineers by providing opportunities to gain valuable experience, develop technical expertise, and build a long-term, rewarding career. Position Description This role is suited for an engineer with 5-10 years of roadway design experience on local and/or state transportation projects who is ready to assume a lead design role on roadway and bridge projects. The successful candidate will possess a strong understanding of geometric roadway and roadside design and be capable of producing roadway plans for Alabama state and local clients. Immediate benefits include opportunities to develop client relationships and represent Thompson Engineering in professional organizations. Long-term growth opportunities may include advancement into senior leadership roles with responsibility for managing projects and developing junior engineers. This position works closely with Thompson Engineering's multi-disciplined team of engineers, surveyors, and environmental scientists. Your Role and Responsibilities As a Transportation Project Engineer, you will work closely with team leaders and support staff to deliver high-quality roadway and bridge designs throughout the Southeast. Responsibilities include: Preparing preliminary design studies, project planning documents, and related activities Developing project specifications, cost and material estimates, reports, and engineering studies Producing design, detail, and layout drawings and sketches Managing task schedules, submittals, and project budgets to ensure timely and cost-effective delivery Ensuring compliance with company safety and quality policies and procedures Minimum Requirements Bachelor's degree in Civil Engineering 5-10 years of relevant experience Alabama Professional Engineer (PE) license, or ability to obtain, required Proven experience with ALDOT design methods, standards, specifications, and plan preparation Proficiency in MicroStation, InRoads, and other Bentley products Working knowledge of OpenRoads preferred Strong knowledge of drainage design and applicable software Ability to manage client expectations, project schedules, and budgets Ability to mentor and train entry-level engineers Strong written and verbal communication skills Ability to work both in the field and in an office environment for extended periods Physical Requirements Ability to work flexible schedules and overtime as required Ability to sit for extended periods and operate a computer Ability to wear appropriate personal protective equipment (PPE) Valid driver's license and ability to operate a company vehicle if required About Thompson Engineering Founded in 1953, Thompson Engineering provides planning, design, and construction-related services across the industrial, commercial, transportation, federal, and municipal markets. From early environmental and geotechnical services to full-scale design, project management, and construction management, Thompson Engineering supports projects from start to finish across the Southeast. Thompson Engineering is a recognized leader in delivering innovative, high-quality solutions for transportation, economic development, and waterfront projects.

Job Description Since 1996, RQC, LLC. has been a leading player in Southern California's robust commercial and governmental Design-Build economy. We now have a national presence with current projects spanning coast to coast. We are a full-service Design-Build company. We specialize in fast-track projects in new commercial construction for both public and private clients, with a primary focus in the Department of Defense market. We are seeking a Mechanical General Laborer to join our team located in Hurlburt Field, FL! This position is responsible for performing tasks that involve physical labor at a construction site using hand and power tools of all types. This position may also assist other craft workers in their duties, while also cleaning and preparing sites, cleaning up rubble and debris, and removing other non-hazardous waste materials. In addition, this position may operate one or several types of power construction equipment. This is all to be done using the appropriate equipment and implementing the required safety practices in support of RQ's Mission, Vision, and Values. RQ Construction believes in the growth and development of our employees, so on the job training and certifications are provided per the project's needs for safety, equipment operations, etc. Prevailing wages will be paid for work performed on a military installation. Pay Range: $18.00-$25.00 per hour Benefits: Medical, Dental, Vision, 401k with Match, 1 week of vacation and sick time. Qualifications are as follows: A high school diploma or GED is the preferred minimum formal education for this position. One or more years (or equivalent) field or trade work experience in commercial construction required; government, military, or large commercial construction experience preferred. Forklift certification and logistics/warehouse/residential are a plus. CPR and First Aid Certifications preferred; Specific training or certificates in the following preferred: Forklift/Manlift training and certificate Fall protection training Scissor lift/boom lift certificate OSHA 10-hour We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, creed, gender (including gender identity and gender expression), religion (all aspects of religious beliefs, observance or practice, including religious dress or grooming practices) marital status, registered domestic partner status, age, national origin or ancestry, physical or mental disability, medical condition (including cancer or a record or history of cancer, and genetic characteristics), sex (including pregnancy, childbirth, breastfeeding or related medical condition), genetic information, sexual orientation, veteran status, or any other basis or status protected by federal, state, or local law or ordinance or regulation. All candidates considered for hire must provide evidence of identity and U.S. work authorization at the time of hire. Additionally, all candidates must successfully pass a drug screening and commercial criminal background check, including a stricter Department of Defense background check, for access to job site at military base (if applicable for position being hired for). Job Posted by ApplicantPro

**Country:** United States of America ** Onsite **U.S. Citizen, U.S. Person, or Immigration Status Requirements:** U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. **Security Clearance Type:** None/Not Required **Security Clearance Status:** Not Required Collins Aerospace is looking for **Manufacturing Engineer** to support repair operations in a facility that is transitioning to state-of-the-art equipment and advanced manufacturing processes. You will be working cross functionally with other engineering disciplines optimizing the performance of a wide range of tasks to facilitate repair operations, production, and business unit objectives for the **Alabama Service Center Foley MRO.** You will also be designing and arranging machines, tooling, and sequence of operations and making sure that mandatory modifications are incorporated to ensure configuration compliance and to improve efficiency. In addition, you will have an opportunity to support advanced manufacturing automation projects and engage with other facilities for Continuous Improvement initiatives. + This role is eligible for relocation assistance **What you will do:** + Work 1st shift hours (6:30am - 3pm) Monday - Friday + Manufacturing Process Design and Improvement: Design, control, and optimize manufacturing processes by collaborating with multi-disciplinary teams and translating engineering design requirements into formal manufacturing documentation. + Advanced Equipment Integration: Develop and deploy advanced manufacturing equipment, including robotics, CNC systems, sensors, and process monitoring tools, while integrating automated solutions for improved efficiency and acts as the CapEx Project Manager. + Process Monitoring and Troubleshooting: Implement manufacturing process controls, troubleshoot process and equipment issues, and drive data-driven improvements to enhance capability, reliability, and cost-effectiveness. + Continuous Improvement and Problem Solving: Lead continuous improvement initiatives, corrective action investigations, and problem-solving efforts to reduce cycle time, lead time, and Cost of Poor Quality (COPQ). Oversee a portfolio of complex projects, ensuring alignment with strategic business objectives. + Tooling and Fixture Development: Own the design, arrangement, and optimization of tooling, fixtures, and gages, ensuring availability and alignment with manufacturing processes. + Defect Analysis and Quality Improvement: Perform defect analysis and identify opportunities to influence engineering designs for improved producibility and reduced costs. + Digital Manufacturing and Innovation: Drive digital manufacturing initiatives, apply 3D modeling and CAD for workspace optimization, and leverage emerging technologies to enhance safety, quality, and efficiency. + New Product Introduction and R&D: Perform process development for new product introductions, conduct ROI analyses to pursue funding, and research new technologies for accelerated time-to-market strategies. + Data Analysis and Lean Principles: Apply statistical methods, Lean manufacturing principles, and ergonomic analysis to improve safety, quality, and operational efficiency across processes. + Compliance and Safety: Work safely always by following company policies and procedures and ensure compliance with safety protocols and manufacturing standards. + Work in a team enviornment + Preform other duties as assigned **Qualifications You Must Have:** + Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and minimum 5 years prior relevant experience or an Advanced Degree in a related field and minimum 3 years of experience + Experience reading and interpreting specifications, engineering drawings, blueprints and models. + Experience adapting equipment or tooling design to factory and production conditions. + Experience with Continuous Improvement tools (Lean, Six Sigma, Red X). + Experience with 3D modeling software (CATIA, Solidworks, NX). + Experience applying and interpreting standard and geometric dimensions and tolerances. + Demonstrated background in optimization of manufacturing processes, such as machining, welding, assembly, and/or other advanced manufacturing methods. + Strong computer skills in the Microsoft suite of programs. **Qualifications We Prefer:** + Experience with process sensing, monitoring equipment, and data collection. + Industry 4.0 (IIOT). + Experience/education with technical writing. + Proficiency with industrial robotics (e.g., ABB, FANUC, KUKA, etc.) and/or related automation technologies (CNC systems, Siemens, FANUC, etc.). + Hands-on experience with welding and industrial additive manufacturing / 3D printing. + Experience configuring PLCs (e.g. Beckhoff, Allen-Bradley, Siemens) for system automation and integrating sensors using industrial communication protocols (e.g. Modbus, DeviceNet, EtherNet/IP, ROS-Industrial). + Background in configuring and interfacing with industrial robot controllers (e.g. ABB IRC, KUKA KRC). **What We Offer:** **Some of our competitive benefits packages include:** - Medical, dental, and vision insurance - Three weeks of vacation for newly hired employees - Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option - Tuition reimbursement program - Student Loan Repayment Program - Life insurance and disability coverage - Optional coverages you can buy pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection - Birth, adoption, parental leave benefits - Ovia Health, fertility, and family planning - Adoption Assistance - Autism Benefit - Employee Assistance Plan, including up to 10 free counseling sessions - Healthy You Incentives, wellness rewards program - Doctor on Demand, virtual doctor visits - Bright Horizons, child and elder care services - Teladoc Medical Experts, second opinion program - And more! Our Advanced Structures team leverages advanced materials and additive manufacturing to develop complex interior and exterior solutions. These solutions ensure structural integrity of the aircraft, help aircraft take off and land, stay trim in the air, move forward, carry cargo and conduct rescues. We delight our customers with superior products and best-in-class service. Our global team is committed to continuous improvement - we work hard to make our solutions lighter-weight, stronger and more technically advanced, so that plane travel can be safer, more affordable and more sustainable in the years to come. We are looking for the best and brightest to fly and land with us! *Please ensure the role type (defined below) is appropriate for your needs before applying to this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. **_As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote._** The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. _RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act._ **Privacy Policy and Terms:** Click on this link (******************************************************** to read the Policy and Terms Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Security Clearance Type: None/Not Required Security Clearance Status: Not Required Collins Aerospace is looking for Manufacturing Engineer to support repair operations in a facility that is transitioning to state-of-the-art equipment and advanced manufacturing processes. You will be working cross functionally with other engineering disciplines optimizing the performance of a wide range of tasks to facilitate repair operations, production, and business unit objectives for the Alabama Service Center Foley MRO. You will also be designing and arranging machines, tooling, and sequence of operations and making sure that mandatory modifications are incorporated to ensure configuration compliance and to improve efficiency. In addition, you will have an opportunity to support advanced manufacturing automation projects and engage with other facilities for Continuous Improvement initiatives. This role is eligible for relocation assistance What you will do: Work 1st shift hours (6:30am - 3pm) Monday - Friday Manufacturing Process Design and Improvement: Design, control, and optimize manufacturing processes by collaborating with multi-disciplinary teams and translating engineering design requirements into formal manufacturing documentation. Advanced Equipment Integration: Develop and deploy advanced manufacturing equipment, including robotics, CNC systems, sensors, and process monitoring tools, while integrating automated solutions for improved efficiency and acts as the CapEx Project Manager. Process Monitoring and Troubleshooting: Implement manufacturing process controls, troubleshoot process and equipment issues, and drive data-driven improvements to enhance capability, reliability, and cost-effectiveness. Continuous Improvement and Problem Solving: Lead continuous improvement initiatives, corrective action investigations, and problem-solving efforts to reduce cycle time, lead time, and Cost of Poor Quality (COPQ). Oversee a portfolio of complex projects, ensuring alignment with strategic business objectives. Tooling and Fixture Development: Own the design, arrangement, and optimization of tooling, fixtures, and gages, ensuring availability and alignment with manufacturing processes. Defect Analysis and Quality Improvement: Perform defect analysis and identify opportunities to influence engineering designs for improved producibility and reduced costs. Digital Manufacturing and Innovation: Drive digital manufacturing initiatives, apply 3D modeling and CAD for workspace optimization, and leverage emerging technologies to enhance safety, quality, and efficiency. New Product Introduction and R&D: Perform process development for new product introductions, conduct ROI analyses to pursue funding, and research new technologies for accelerated time-to-market strategies. Data Analysis and Lean Principles: Apply statistical methods, Lean manufacturing principles, and ergonomic analysis to improve safety, quality, and operational efficiency across processes. Compliance and Safety: Work safely always by following company policies and procedures and ensure compliance with safety protocols and manufacturing standards. Work in a team enviornment Preform other duties as assigned Qualifications You Must Have: Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and minimum 5 years prior relevant experience or an Advanced Degree in a related field and minimum 3 years of experience Experience reading and interpreting specifications, engineering drawings, blueprints and models. Experience adapting equipment or tooling design to factory and production conditions. Experience with Continuous Improvement tools (Lean, Six Sigma, Red X). Experience with 3D modeling software (CATIA, Solidworks, NX). Experience applying and interpreting standard and geometric dimensions and tolerances. Demonstrated background in optimization of manufacturing processes, such as machining, welding, assembly, and/or other advanced manufacturing methods. Strong computer skills in the Microsoft suite of programs. Qualifications We Prefer: Experience with process sensing, monitoring equipment, and data collection. Industry 4.0 (IIOT). Experience/education with technical writing. Proficiency with industrial robotics (e.g., ABB, FANUC, KUKA, etc.) and/or related automation technologies (CNC systems, Siemens, FANUC, etc.). Hands-on experience with welding and industrial additive manufacturing / 3D printing. Experience configuring PLCs (e.g. Beckhoff, Allen-Bradley, Siemens) for system automation and integrating sensors using industrial communication protocols (e.g. Modbus, DeviceNet, EtherNet/IP, ROS-Industrial). Background in configuring and interfacing with industrial robot controllers (e.g. ABB IRC, KUKA KRC). What We Offer: Some of our competitive benefits packages include: • Medical, dental, and vision insurance • Three weeks of vacation for newly hired employees • Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option • Tuition reimbursement program • Student Loan Repayment Program • Life insurance and disability coverage • Optional coverages you can buy pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection • Birth, adoption, parental leave benefits • Ovia Health, fertility, and family planning • Adoption Assistance • Autism Benefit • Employee Assistance Plan, including up to 10 free counseling sessions • Healthy You Incentives, wellness rewards program • Doctor on Demand, virtual doctor visits • Bright Horizons, child and elder care services • Teladoc Medical Experts, second opinion program • And more! Our Advanced Structures team leverages advanced materials and additive manufacturing to develop complex interior and exterior solutions. These solutions ensure structural integrity of the aircraft, help aircraft take off and land, stay trim in the air, move forward, carry cargo and conduct rescues. We delight our customers with superior products and best-in-class service. Our global team is committed to continuous improvement - we work hard to make our solutions lighter-weight, stronger and more technically advanced, so that plane travel can be safer, more affordable and more sustainable in the years to come. We are looking for the best and brightest to fly and land with us! *Please ensure the role type (defined below) is appropriate for your needs before applying to this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

**Crane Aerospace and Electronics** has an exciting opportunity for a **Manufacturing Engineer-Electronics** at our **Fort Walton beach, FL** location. **About Crane:** **Crane Aerospace & Electronics** supplies critical systems and components to the aerospace and defense markets. You'll find Crane Aerospace & Electronics in some of the toughest environments: from engines to landing gear; from satellites to medical implants and from missiles to unmanned aerial systems (UAS). Located minutes away from picturesque white-sand beaches and emerald green water, our Crane Aerospace & Electronics Fort Walton Beach location is home to our Defense Power business - a leading supplier of high-power solutions for aerospace & defense applications. You'll join a trusted, dynamic organization that supplies prime defense manufacturers with custom radar, directed energy and electric warfare solutions for placement on innovative, next-gen military platforms. Join us and our growing business as we supply solutions that enable the latest defense technology! **Job Summary:** The Manufacturing Engineer performs independent assignments to develop and recommend improvements in the Manufacturing system and in product manufacturability and cost effectiveness. **Essential Functions:** + Study, analyze and design methods, procedures, processes, layouts, flow, fixtures and tooling as needed to support production. + Investigate, recommend, and implement manufacturing cost reduction and product improvement programs. + Identify root cause and corrective actions for manufacturing problems. + Participate in customer specification and statement of work reviews. + Participate in the review and evaluation of new product designs or design changes. + Review and analyze design change requests initiated by manufacturing personnel to determine feasibility, validity, savings, effect on design, and to verify justification for change. + Evaluate, test and select facilities, equipment and materials required for production in conjunction with Production Supervisors, Purchasing and other groups. + Perform a variety of cost analyses, e.g., cost estimates for quotations or "make or buy" decisions. + Develop manufacturing operating instructions. + Develop and track manufacturing metrics to monitor the health of processes. + Evaluate non-conformances as part of the Material Review Board + Direct work activities of production operators to aid in problem solving. + Develop procedures and train assemblers and operators in machine operations, processes or assembly applications. + Coordinate with vendors and customers. + Identify and prioritize work with limited input from manager. + Develop ROI or business case and present to management in the support of capital equipment, new product or process development and productivity improvements. + Any other task assigned by supervisor or management. **Minimum Qualifications:** + Experience: 5+ years of experience as a Manufacturing Engineer + Knowledge: Practical application knowledge of the theories of modern production principles and methods as applied to a high technology electronics design and manufacturing operation; Basic knowledge of material characteristics and processing, chemicals; Basic concepts of electrical systems, mechanical systems, fluids, and heat transfer + Knowledge of AS9100 and AS9145 + Skills/Abilities: Able to effectively communicate with employees at all levels of the organization. + Education/Certification: BA or BS degree required. Preferred in Electrical Engineering, Industrial Engineering, Material Science or related field. + **Eligibility Requirement:** This role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government. Additionally, as a US Department of Defense contractor, we are bound by the International Traffic in Arms Regulations (ITAR). Applicants selected could be subject to a Government security investigation and must meet the eligibility requirements for access to classified information **Preferred Qualifications:** + Experience in a regulated manufacturing environment. **Top Benefits:** As a team member at Crane Aerospace and Electronics, you'll enjoy: + **Benefits:** Health care, dental, vision, life and disability insurance starting the first day of the month. + **Time Off:** 15 days of paid time off that start accruing your first day at Crane and 12 paid holidays per year. + **401k Retirement Plan:** 401k plan with company match + **Education Reimbursement:** eligible after 90 days of employment You can see a list of our benefits at *************************************** or visit our website at *************** for more information on our company and great opportunities. We are committed to operational excellence and world class processes. We employ Lean manufacturing techniques to optimize manufacturing efficiency and accuracy on all product lines. Our products are known for their technical strength, proven reliability and overall value. In our efforts to maintain a safe and drug-free workplace, Crane Aerospace & Electronics requires that candidates complete a satisfactory background check. FAA sensitive positions require employees to participate in a random drug test pool. \#LI-CK1 #CAE _This description has been designed to indicate the general nature and level of work being performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job._ _Crane Company. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, gender, sexual orientation, general identity, national origin, disability or veteran status._ At Crane, we believe that attracting and retaining the highest quality people is the best insurance of success. Our goal is to recruit talented people and train them within a culture that calls for performance with trust and respect. Join us. The unique backgrounds and differences of our associates make us stronger, more capable, and more successful. Beyond an associate's base compensation, we reward and reinforce wellbeing with a compelling package of both cash and non-cash benefits, including comprehensive health, wellness incentives, assistance with retirement savings, paid time off, paid holidays, and tuition reimbursement - as well as performance-based bonus programs for certain positions. Crane prioritizes career development for our associates. All associates receive an annual development plan that includes a mixture of on-the-job coaching and formal training experiences to support individual development needs. We firmly believe in associate growth that supports career progression and we will proactively support your ongoing career development.

Crane Aerospace and Electronics has an exciting opportunity for a Manufacturing Engineer-Electronics at our Fort Walton beach, FL location. About Crane: Crane Aerospace & Electronics supplies critical systems and components to the aerospace and defense markets. You'll find Crane Aerospace & Electronics in some of the toughest environments: from engines to landing gear; from satellites to medical implants and from missiles to unmanned aerial systems (UAS). Located minutes away from picturesque white-sand beaches and emerald green water, our Crane Aerospace & Electronics Fort Walton Beach location is home to our Defense Power business - a leading supplier of high-power solutions for aerospace & defense applications. You'll join a trusted, dynamic organization that supplies prime defense manufacturers with custom radar, directed energy and electric warfare solutions for placement on innovative, next-gen military platforms. Join us and our growing business as we supply solutions that enable the latest defense technology! Job Summary: The Manufacturing Engineer performs independent assignments to develop and recommend improvements in the Manufacturing system and in product manufacturability and cost effectiveness. Essential Functions: Study, analyze and design methods, procedures, processes, layouts, flow, fixtures and tooling as needed to support production. Investigate, recommend, and implement manufacturing cost reduction and product improvement programs. Identify root cause and corrective actions for manufacturing problems. Participate in customer specification and statement of work reviews. Participate in the review and evaluation of new product designs or design changes. Review and analyze design change requests initiated by manufacturing personnel to determine feasibility, validity, savings, effect on design, and to verify justification for change. Evaluate, test and select facilities, equipment and materials required for production in conjunction with Production Supervisors, Purchasing and other groups. Perform a variety of cost analyses, e.g., cost estimates for quotations or "make or buy" decisions. Develop manufacturing operating instructions. Develop and track manufacturing metrics to monitor the health of processes. Evaluate non-conformances as part of the Material Review Board Direct work activities of production operators to aid in problem solving. Develop procedures and train assemblers and operators in machine operations, processes or assembly applications. Coordinate with vendors and customers. Identify and prioritize work with limited input from manager. Develop ROI or business case and present to management in the support of capital equipment, new product or process development and productivity improvements. Any other task assigned by supervisor or management. Minimum Qualifications: Experience: 5+ years of experience as a Manufacturing Engineer Knowledge: Practical application knowledge of the theories of modern production principles and methods as applied to a high technology electronics design and manufacturing operation; Basic knowledge of material characteristics and processing, chemicals; Basic concepts of electrical systems, mechanical systems, fluids, and heat transfer Knowledge of AS9100 and AS9145 Skills/Abilities: Able to effectively communicate with employees at all levels of the organization. Education/Certification: BA or BS degree required. Preferred in Electrical Engineering, Industrial Engineering, Material Science or related field. Eligibility Requirement: This role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government. Additionally, as a US Department of Defense contractor, we are bound by the International Traffic in Arms Regulations (ITAR). Applicants selected could be subject to a Government security investigation and must meet the eligibility requirements for access to classified information Preferred Qualifications: Experience in a regulated manufacturing environment. Top Benefits: As a team member at Crane Aerospace and Electronics, you'll enjoy: Benefits: Health care, dental, vision, life and disability insurance starting the first day of the month. Time Off: 15 days of paid time off that start accruing your first day at Crane and 12 paid holidays per year. 401k Retirement Plan: 401k plan with company match Education Reimbursement: eligible after 90 days of employment You can see a list of our benefits at *************************************** or visit our website at *************** for more information on our company and great opportunities. We are committed to operational excellence and world class processes. We employ Lean manufacturing techniques to optimize manufacturing efficiency and accuracy on all product lines. Our products are known for their technical strength, proven reliability and overall value. In our efforts to maintain a safe and drug-free workplace, Crane Aerospace & Electronics requires that candidates complete a satisfactory background check. FAA sensitive positions require employees to participate in a random drug test pool. #LI-CK1 #CAE This description has been designed to indicate the general nature and level of work being performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. Crane Company. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, gender, sexual orientation, general identity, national origin, disability or veteran status.

**Outside Recruiters Please Do Not Contact Us** Summary/Objective We are seeking an experienced Project Engineer to assist, support, and collaborate on the safe and profitable management and execution of projects. The candidate will work with their assigned project manager to help achieve their respective project management objectives. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Develop and implement project execution strategies Maintain and communicate various project performance metrics and analytics Provide leadership and support to functional area managers Support forecasting and reporting Act as a liaison between the superintendent and the subcontractors in coordinating the delivery date of materials by analyzing the schedule and the required installation dates. Construction engineering Work with subcontractors and vendors Foster and maintain favorable relationships with project stakeholders Market and promote the Superior Construction brand Other Assist with the leadership and development of team members Foster and maintain a safe work environment Strong interpersonal, written, and verbal communication skills All other duties as assigned Competencies Ethical Conduct Diversity and inclusion Results driven Teamwork orientation Excellent analytical, organizational, and communication skills Supervisory Requirements This position will not have any direct reports. Work Environment Additionally, a pressurized environment is the norm. The employee will be working on heavy civil and highway construction sites. The noise level in the work environment and job sites can be loud. The position regularly works near moving mechanical parts and in outdoor conditions that include inclement weather, heat, humidity, and exposure to dust and asphalt. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be able to navigate rugged terrain, climb substantial heights, and work over and on water. The position requires good manual dexterity (hand, hand with arm, two hands) and multilimbed coordination. The employee must have excellent stamina. Position Type/Expected Hours of Work This is a full-time exempt position. This position sometimes requires long hours, holidays, and weekend work. Travel The role will require up to 30% of travel. Required Education and Experience BS Construction, Engineering, or other relevant fields of study Entry-level to four years of industry tenure Field-based project execution experience Field-based leadership roles Knowledge of route surveying and scheduling Strong oral and written communication skills Safety Trained Supervisor Construction Certification Preferred Education and Experience Viewpoint experience is a plus Additional Eligibility Requirements Must possess or be able to obtain a valid and appropriate state driver's license before employment. OUR MISSION AND VISION We are an American family-owned and operated heavy civil contractor dedicated to providing innovative solutions to help meet the nation's growing infrastructure needs. To be America's preferred heavy civil contractor, expanding our markets and services while staying true to our family-oriented culture and fostering an environment where our employees can prosper. Our Core Values: Family Safety Integrity Innovation Commitment Empowerment Equal Opportunity Employer Upon hire, you will be provided with a copy of your specific . Please note s are not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. THE COMPANY RESERVES THE RIGHT TO MODIFY, INTERPRET, OR APPLY THIS IN ANY WAY THE COMPANY DESIRES. THIS IN NO WAY IMPLIES THAT THESE ARE THE ONLY DUTIES, INCLUDING ESSENTIAL DUTIES, TO BE PERFORMED BY THE EMPLOYEE OCCUPYING THIS POSITION. THIS JOB DESCRIPTION IS NOT AN EMPLOYMENT CONTRACT, IMPLIED OR OTHERWISE. THE EMPLOYMENT RELATIONSHIP REMAINS “AT-WILL.” QUALIFIED EMPLOYEES WHO, BECAUSE OF A PHYSICAL OR MENTAL IMPAIRMENT THAT SIGNIFICANTLY LIMITS A MAJOR LIFE ACTIVITY, REQUIRE A REASONABLE ACCOMMODATION TO PERFORM THE ESSENTIAL FUNCTIONS OF THIS POSITION SHOULD NOTIFY THEIR MANAGER OR HUMAN RESOURCES. Accessibility: If you need an accommodation as part of the employment process please contact Human Resources. Superior Construction provides equal opportunity employment to all individuals regardless of their race, color, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law.

We are Engineering the Future Only 30 minutes from Mobile Bay and just an hour from the pristine white sand beaches of Alabama's Gulf Coast, your next career move could come with a view! Join Kaishan Compressor USA in Loxley, Alabama at our US Headquarters where we design and engineer high quality rotary screw air compressors that are driving a more energy efficient future. Our 100,000 square foot state-of-the-art facility is climate controlled and is an engineer's dream with a brand-new R&D area. Please note this role is an in-person role at our Loxley Headquarters and is not eligible for remote work. Day To Day: Design the screw compressor system and system components, such as the inlet filter, oil separator, oil cooler, oil filter, after-cooler, air or gas piping system, oil piping system and related pneumatic and fluid dynamic controls etc. This design shall include the related heat balance analysis, fluid dynamic analysis, strength analysis and any other necessary analyses. Complete the P&ID or flow schematic drawings for any compressor packages. The flow schematic drawing shall be supported by the necessary calculation and analysis. Work with suppliers to specify and select any required mechanical component. Complete the detailed layouts for the compressor packages. Perform the design work with designer(s) as necessary. Review and check the drawings completed by designers and take the responsibility for the design. Design the compressor canopies and compressor skids. Understand the engineering economics and conduct the efficiency and cost and reliability analysis. Apply the theory of screw compressors and their systems and develop the experience and knowledge to support the compressor applications and production. Complete the Bill of Materials (BOM) for compressor systems. Actively involve the product innovation team and communicate any necessary information from the end users for the purpose of the product innovation. Complete any mechanical engineering related tasks assigned by his or her supervisor. Perform follow- up tests in the R&D area. Assist the Quality Department in the field quality resolution process. Conduct some small design projects. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. What We Believe In: Performing quality work within deadlines with or without direct supervision. Interacting professionally with other employees, customers, and suppliers. Working effectively as a team contributor on all assignments. Working independently while understanding the necessity for communicating and coordinating work efforts with other employees and organizations. Always work safely and report any unsafe conditions. We are all responsible for Safety! About You: Thinking of applying? See if this sounds like you: Bachelor's or master's degree in mechanical engineering or industrial engineering. Minimum 5 years of experience with compressors or a related field. Knowledge of thermodynamics, heat transfer, fluid dynamics, mechanics of materials, fabrication processes, sound and vibration principles, and sheet metal and structural. Knowledge and/or experience in compressors and their systems is a plus. Ability to use 3D CAD (Solid Works a plus) Knowledge of product structures and costing methods. Must be creative, innovative, cost driven, have good hands-on practical mechanical skills and be able to work in a team environment. Strong attention to detail Able to collaborate with members from different teams within the organization. Really Good Benefits: We offer Medical, Dental, Vision, Vacation and Sick Time-Off, Short and Long-Term Disability, Life Insurance, Tuition Reimbursement, Matching 401K match of 6% and an Amazing Profit-Sharing Program! Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

In business since 2000, LanceSoft is a nationally certified Minority Business Enterprise (MBE) that has established itself as a pioneer in providing highly scalable, cost-effective workforce solutions to a diverse set of customers across various industries in the United States. Headquartered in Virginia, LanceSoft currently operates out of several locations in the US and Canada. Job Description •Ability to create and update AUTOCAD drawings. •Ability to create 3D models using additive manufacturing equipment. •Ability to revise engineering drawings from basic layouts, established references, notes and discussions with engineers, and standard data. •Utilize computer-aided design equipment and/or manual tools. •Complete layout drawings prepared by others in accordance with standard engineering drafting practices or may develop complete major layouts of engineering drawings. •Prepare detailed drawings; contributes design modifications (as needed) to improve quality of product. •Technical knowledge and experience with AutoCAD software and CAD standards required. •Ability to prioritize multiple projects/tasks and respond to the needs of multiple project managers. •Requires knowledge, skills associated with the mechanical and electrical disciplines. •Well versed in developing mechanical drawings. •Understanding of and experienced in proper drawing dimensioning. •Understanding of and experience in proper weld nomenclature. •Ability to work as part of a team in a fast paced environment with critical deadlines •Professional, dependable, and results oriented. •Ability to follow simple oral or written instructions. •Strong organizational skill and detail oriented. •Strong oral and written communication skills. •Good problem solver with the ability to identify alternative solutions. •Perform additional duties as assigned by manager. Qualifications Qualifications/Minimum Requirements: •High School Diploma or equivalent. Associated degree preferred. •3+ years of AutoCAD (AutoDesk) experience or other CAD software. •2+ years of Solidworks experience or other 3D Modeling software. •Valid driver's license. •Strong Mechanical aptitude. •Must be self-directed. Additional Information Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, gender Identity, sexual orientation, national origin, age, disability, veteran status, pregnancy, or other status protected by law. We wish to thank all applicants for their interest and effort in applying for this position, however, only candidates selected for interviews will be contacted. No unsolicited agency referrals please.

At Zone 5 Technologies, we're redefining what's possible in unmanned aircraft systems. Our team of engineers and innovators is developing cutting-edge autonomous solutions that push the boundaries of UAS technology - solving complex challenges that matter. We're building the future of UAS capabilities, and we're looking for exceptional talent to join us. If you're driven by hard problems, energized by rapid innovation, and ready to make an impact on next-generation flight systems, you belong here. We're looking for a Mechanical Engineer V/VI for Unmanned Aircraft Systems (UAS) which is a senior-level role responsible for leading the design, development, and implementation of advanced mechanical systems for UAVs. This position involves strategic oversight, innovative problem-solving, and mentorship of junior engineers. Engineers in this role will contribute to cutting-edge advancements in UAS technologies, driving innovation in areas such as autonomous systems, additive manufacturing, and aerospace materials. Key Responsibilities: Strategic Design Leadership: Lead the design of complex mechanical systems for UAVs, including advanced airframes, propulsion systems, and payload integration. Advanced Prototyping and Testing: Oversee the development and testing of UAV prototypes, ensuring compliance with performance and reliability goals. Comprehensive Structural Analysis: Conduct and review in-depth stress, strain, and fatigue analysis for UAV mechanical systems operating under extreme conditions. Thermal Management Expertise: Develop and implement innovative thermal systems for high-performance UAVs. Cross-Functional Integration: Lead collaboration with multidisciplinary teams to integrate mechanical systems with avionics, sensors, and software controls. Material Innovation: Drive research and development of advanced materials for UAV applications, focusing on composites and lightweight alloys. Failure Analysis and Solutions: Lead root cause analysis of mechanical failures and propose long-term, impactful solutions. Regulatory Compliance Leadership: Ensure all designs meet and exceed UAS regulations and industry certifications. Research and Development: Spearhead R&D initiatives to advance UAS technologies, including autonomous navigation and advanced manufacturing techniques. Mentorship and Leadership: Provide technical guidance and mentorship to junior and mid-level engineers, fostering professional growth within the team. Documentation and Reporting: Author comprehensive technical documentation, including design reviews, test reports, and compliance certifications. Qualifications: Education: Bachelor's or Master's degree in Mechanical Engineering, Aerospace Engineering, or a related field. Experience: 10+ years of experience in aerospace mechanical systems, with at least 5 years dedicated to UAV development. Skills: Advanced proficiency in CAD and mechanical design software (SolidWorks). Extensive experience with FEA, CFD, and other advanced simulation tools. Expertise in structural mechanics, aerodynamics, and thermodynamics. In-depth knowledge of UAV manufacturing processes, including additive manufacturing and composite fabrication. Strong leadership and project management skills. Familiarity with advanced UAV regulations and certifications (e.g., FAA Part 107, DO-178). Proven ability to drive innovation and manage complex engineering projects. Pay range for this role$175,000-$225,000 USD What's in it for you: Benefits: Competitive total compensation package Comprehensive benefit package options include medical, dental, vision, life, and more. 401k with company-match 4 weeks of paid time off each year 12 annual company holidays Why Join Zone 5 Technologies? Innovative Environment: Work on cutting-edge technology that is shaping the future of defense and aerospace. Collaborative Culture: Join a team of passionate professionals dedicated to pushing the boundaries of what's possible. Career Growth: Opportunities for professional development and career advancement. If you are passionate about unmanned aircraft technology and want to be a part of a dynamic and growing company, we would love to hear from you. Apply today and join the Zone 5 Technologies team! Note about our Texas roles: we are in the process of opening a location on the mid-west side of the DFW metro region. Roles in Texas will initially work remotely and then be expected to be onsite when that location opens in 2026. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire. Zone 5 Technologies is a federal contractor and participates in E-Verify to confirm employment eligibility. As required by law, we will verify the identity and employment authorization of all new employees using the E-Verify system. Learn more about your rights and responsibilities under E-Verify: *************************

Thompson Engineering has an immediate opening for a Transportation Project Engineer to join our growing team in Mobile, Daphne, or Orange Beach, Alabama. This position is ideal for a motivated roadway design professional seeking growth into a project engineer role within a collaborative, employee-owned firm. At Thompson Engineering, we aspire to be the firm of choice by driving success for our clients, employees, and the communities we serve. We provide a broad range of engineering and related services across multiple markets throughout the Southeast, guided by our core values of integrity, safety, performance, ownership, teamwork, innovation, entrepreneurial spirit, and professionalism. Our culture supports self-driven engineers by providing opportunities to gain valuable experience, develop technical expertise, and build a long-term, rewarding career. Position Description This role is suited for an engineer with 5-10 years of roadway design experience on local and/or state transportation projects who is ready to assume a lead design role on roadway and bridge projects. The successful candidate will possess a strong understanding of geometric roadway and roadside design and be capable of producing roadway plans for Alabama state and local clients. Immediate benefits include opportunities to develop client relationships and represent Thompson Engineering in professional organizations. Long-term growth opportunities may include advancement into senior leadership roles with responsibility for managing projects and developing junior engineers. This position works closely with Thompson Engineering's multi-disciplined team of engineers, surveyors, and environmental scientists. Your Role and Responsibilities As a Transportation Project Engineer, you will work closely with team leaders and support staff to deliver high-quality roadway and bridge designs throughout the Southeast. Responsibilities include: * Preparing preliminary design studies, project planning documents, and related activities * Developing project specifications, cost and material estimates, reports, and engineering studies * Producing design, detail, and layout drawings and sketches * Managing task schedules, submittals, and project budgets to ensure timely and cost-effective delivery * Ensuring compliance with company safety and quality policies and procedures Minimum Requirements * Bachelor's degree in Civil Engineering * 5-10 years of relevant experience * Alabama Professional Engineer (PE) license, or ability to obtain, required * Proven experience with ALDOT design methods, standards, specifications, and plan preparation * Proficiency in MicroStation, InRoads, and other Bentley products * Working knowledge of OpenRoads preferred * Strong knowledge of drainage design and applicable software * Ability to manage client expectations, project schedules, and budgets * Ability to mentor and train entry-level engineers * Strong written and verbal communication skills * Ability to work both in the field and in an office environment for extended periods Physical Requirements * Ability to work flexible schedules and overtime as required * Ability to sit for extended periods and operate a computer * Ability to wear appropriate personal protective equipment (PPE) * Valid driver's license and ability to operate a company vehicle if required About Thompson Engineering Founded in 1953, Thompson Engineering provides planning, design, and construction-related services across the industrial, commercial, transportation, federal, and municipal markets. From early environmental and geotechnical services to full-scale design, project management, and construction management, Thompson Engineering supports projects from start to finish across the Southeast. Thompson Engineering is a recognized leader in delivering innovative, high-quality solutions for transportation, economic development, and waterfront projects.

Since 1996, RQC, LLC. has been a leading player in Southern California's robust commercial and governmental Design-Build economy. We now have a national presence with current projects spanning coast to coast. We are a full-service Design-Build company. We specialize in fast-track projects in new commercial construction for both public and private clients, with a primary focus in the Department of Defense market. We are seeking a Mechanical General Laborer to join our team located in Hurlburt Field, FL! This position is responsible for performing tasks that involve physical labor at a construction site using hand and power tools of all types. This position may also assist other craft workers in their duties, while also cleaning and preparing sites, cleaning up rubble and debris, and removing other non-hazardous waste materials. In addition, this position may operate one or several types of power construction equipment. This is all to be done using the appropriate equipment and implementing the required safety practices in support of RQ's Mission, Vision, and Values. RQ Construction believes in the growth and development of our employees, so on the job training and certifications are provided per the project's needs for safety, equipment operations, etc. Prevailing wages will be paid for work performed on a military installation. Pay Range: $18.00-$25.00 per hour Benefits: Medical, Dental, Vision, 401k with Match, 1 week of vacation and sick time. Qualifications are as follows: * A high school diploma or GED is the preferred minimum formal education for this position. * One or more years (or equivalent) field or trade work experience in commercial construction required; government, military, or large commercial construction experience preferred. * Forklift certification and logistics/warehouse/residential are a plus. * CPR and First Aid Certifications preferred; Specific training or certificates in the following preferred: * Forklift/Manlift training and certificate * Fall protection training * Scissor lift/boom lift certificate * OSHA 10-hour We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, creed, gender (including gender identity and gender expression), religion (all aspects of religious beliefs, observance or practice, including religious dress or grooming practices) marital status, registered domestic partner status, age, national origin or ancestry, physical or mental disability, medical condition (including cancer or a record or history of cancer, and genetic characteristics), sex (including pregnancy, childbirth, breastfeeding or related medical condition), genetic information, sexual orientation, veteran status, or any other basis or status protected by federal, state, or local law or ordinance or regulation. All candidates considered for hire must provide evidence of identity and U.S. work authorization at the time of hire. Additionally, all candidates must successfully pass a drug screening and commercial criminal background check, including a stricter Department of Defense background check, for access to job site at military base (if applicable for position being hired for).

Outside Recruiters Please Do Not Contact Us Summary/Objective We are seeking an experienced Project Engineer to assist, support, and collaborate on the safe and profitable management and execution of projects. The candidate will work with their assigned project manager to help achieve their respective project management objectives. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Develop and implement project execution strategies * Maintain and communicate various project performance metrics and analytics * Provide leadership and support to functional area managers * Support forecasting and reporting * Act as a liaison between the superintendent and the subcontractors in coordinating the delivery date of materials by analyzing the schedule and the required installation dates. * Construction engineering * Work with subcontractors and vendors * Foster and maintain favorable relationships with project stakeholders * Market and promote the Superior Construction brand Other * Assist with the leadership and development of team members * Foster and maintain a safe work environment * Strong interpersonal, written, and verbal communication skills * All other duties as assigned Competencies * Ethical Conduct * Diversity and inclusion * Results driven * Teamwork orientation * Excellent analytical, organizational, and communication skills Supervisory Requirements This position will not have any direct reports. Work Environment Additionally, a pressurized environment is the norm. The employee will be working on heavy civil and highway construction sites. The noise level in the work environment and job sites can be loud. The position regularly works near moving mechanical parts and in outdoor conditions that include inclement weather, heat, humidity, and exposure to dust and asphalt. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be able to navigate rugged terrain, climb substantial heights, and work over and on water. The position requires good manual dexterity (hand, hand with arm, two hands) and multilimbed coordination. The employee must have excellent stamina. Position Type/Expected Hours of Work This is a full-time exempt position. This position sometimes requires long hours, holidays, and weekend work. Travel The role will require up to 30% of travel. Required Education and Experience * BS Construction, Engineering, or other relevant fields of study * Entry-level to four years of industry tenure * Field-based project execution experience * Field-based leadership roles * Knowledge of route surveying and scheduling * Strong oral and written communication skills * Safety Trained Supervisor Construction Certification Preferred Education and Experience * Viewpoint experience is a plus Additional Eligibility Requirements * Must possess or be able to obtain a valid and appropriate state driver's license before employment. OUR MISSION AND VISION We are an American family-owned and operated heavy civil contractor dedicated to providing innovative solutions to help meet the nation's growing infrastructure needs. To be America's preferred heavy civil contractor, expanding our markets and services while staying true to our family-oriented culture and fostering an environment where our employees can prosper. Our Core Values: * Family * Safety * Integrity * Innovation * Commitment * Empowerment Equal Opportunity Employer Upon hire, you will be provided with a copy of your specific . Please note s are not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. THE COMPANY RESERVES THE RIGHT TO MODIFY, INTERPRET, OR APPLY THIS IN ANY WAY THE COMPANY DESIRES. THIS IN NO WAY IMPLIES THAT THESE ARE THE ONLY DUTIES, INCLUDING ESSENTIAL DUTIES, TO BE PERFORMED BY THE EMPLOYEE OCCUPYING THIS POSITION. THIS JOB DESCRIPTION IS NOT AN EMPLOYMENT CONTRACT, IMPLIED OR OTHERWISE. THE EMPLOYMENT RELATIONSHIP REMAINS "AT-WILL." QUALIFIED EMPLOYEES WHO, BECAUSE OF A PHYSICAL OR MENTAL IMPAIRMENT THAT SIGNIFICANTLY LIMITS A MAJOR LIFE ACTIVITY, REQUIRE A REASONABLE ACCOMMODATION TO PERFORM THE ESSENTIAL FUNCTIONS OF THIS POSITION SHOULD NOTIFY THEIR MANAGER OR HUMAN RESOURCES. Accessibility: If you need an accommodation as part of the employment process please contact Human Resources. Superior Construction provides equal opportunity employment to all individuals regardless of their race, color, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law.

Job DescriptionTransportation Project Engineer Thompson Engineering has an immediate opening for a Transportation Project Engineer to join our growing team in Mobile, Daphne, or Orange Beach, Alabama. This position is ideal for a motivated roadway design professional seeking growth into a project engineer role within a collaborative, employee-owned firm. At Thompson Engineering, we aspire to be the firm of choice by driving success for our clients, employees, and the communities we serve. We provide a broad range of engineering and related services across multiple markets throughout the Southeast, guided by our core values of integrity, safety, performance, ownership, teamwork, innovation, entrepreneurial spirit, and professionalism. Our culture supports self-driven engineers by providing opportunities to gain valuable experience, develop technical expertise, and build a long-term, rewarding career. Position Description This role is suited for an engineer with 5-10 years of roadway design experience on local and/or state transportation projects who is ready to assume a lead design role on roadway and bridge projects. The successful candidate will possess a strong understanding of geometric roadway and roadside design and be capable of producing roadway plans for Alabama state and local clients. Immediate benefits include opportunities to develop client relationships and represent Thompson Engineering in professional organizations. Long-term growth opportunities may include advancement into senior leadership roles with responsibility for managing projects and developing junior engineers. This position works closely with Thompson Engineering's multi-disciplined team of engineers, surveyors, and environmental scientists. Your Role and Responsibilities As a Transportation Project Engineer, you will work closely with team leaders and support staff to deliver high-quality roadway and bridge designs throughout the Southeast. Responsibilities include: Preparing preliminary design studies, project planning documents, and related activities Developing project specifications, cost and material estimates, reports, and engineering studies Producing design, detail, and layout drawings and sketches Managing task schedules, submittals, and project budgets to ensure timely and cost-effective delivery Ensuring compliance with company safety and quality policies and procedures Minimum Requirements Bachelor's degree in Civil Engineering 5-10 years of relevant experience Alabama Professional Engineer (PE) license, or ability to obtain, required Proven experience with ALDOT design methods, standards, specifications, and plan preparation Proficiency in MicroStation, InRoads, and other Bentley products Working knowledge of OpenRoads preferred Strong knowledge of drainage design and applicable software Ability to manage client expectations, project schedules, and budgets Ability to mentor and train entry-level engineers Strong written and verbal communication skills Ability to work both in the field and in an office environment for extended periods Physical Requirements Ability to work flexible schedules and overtime as required Ability to sit for extended periods and operate a computer Ability to wear appropriate personal protective equipment (PPE) Valid driver's license and ability to operate a company vehicle if required About Thompson Engineering Founded in 1953, Thompson Engineering provides planning, design, and construction-related services across the industrial, commercial, transportation, federal, and municipal markets. From early environmental and geotechnical services to full-scale design, project management, and construction management, Thompson Engineering supports projects from start to finish across the Southeast. Thompson Engineering is a recognized leader in delivering innovative, high-quality solutions for transportation, economic development, and waterfront projects.