Mechanical design engineer jobs in Shirley, NY

Mechanical Design Engineer (Building Systems) $54/hr - $58/hr + Bonus + Training + Progression + Overtime + 401k + Medical + Dental + Vision Westport, Connecticut (Commutable from: Norwalk, Fairfield, Darien) Are you a Mechanical Engineer looking to take the lead on a range of technical projects within mechanical building systems and progress your career into lead roles in the future, while getting full on the job training on electrical & plumbing systems to broaden your expertise. On offer is a change to increase your responsibility and take the technical lead on innovative mechanical design projects for household name clients. You will receive all the tools to develop into a technical expert in the future. This company are specialists within their industry, and are now in a phase of exciting growth as an organization. This is a unique opportunity to get in at the ground floor of already well-established organization. On offer is a chance to work on one-of-a-kind projects with household name clients, surrounding mechanical building systems, you will develop into a technical expert in the industry and progress your career through clear pathways into leadership. This role would suit a Mechanical Design Engineer from a building system background, looking to broaden their experience and play a key role in the growth of an exciting organization. The Role: Mechanical Design of intricate building systems Work closely with key household name client supporting their needs Progress into a technical expert in the future The Candidate: Building System Mechanical Design experience AutoCAD & Revit experience Understanding of Building Codes To apply for this role or to be considered for further roles, please click "Apply Now”, or contact Edward Chandler at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates. Keywords: Mechanical Design Engineer; Mechanical Engineer; Building Systems; HVAC Design; MEP Engineering; Mechanical Building Systems; Building Services Engineering; Mechanical Drafting; AutoCAD; Revit; BIM; 3D Modelling; Technical Design; Mechanical Layouts; Building Codes; Construction Codes; Mechanical Schematics; Piping Design; Plumbing Systems; Electrical Systems Training; Multidisciplinary Engineering; Facilities Engineering; Commercial Buildings; Design Engineering; Project Engineering; Technical Lead; Engineering Progression; Engineering Training; Westport CT; Connecticut Engineering Jobs; Norwalk; Fairfield; Darien; Mechanical Engineering Contractor; Engineering Consultancy; Building Services Projects; Client-Facing Engineer; Mechanical System Integration.

Haugland Group, a privately-owned Long Island, New York-based civil infrastructure and energy construction company has an immediate opportunity for an experienced Project Engineer to join our team. We are looking for an experienced, self-motivated, highly organized individual to join the Project Management team to provide all facets of construction project support, including submittal processing, material management, and budget analysis. At Haugland, we understand that pushing the boundaries of what has been done is essential to develop the infrastructure of tomorrow. The journey won't be simple, but what gets us there is. At Haugland Group, Our Word is Our Way. We are leaders in building what's next because we see the path to get there and we're setting a new standard of exceptional along the way. Let's build together! Key Functions Coordinate with the Project Management team on engineering and procedural plans, and suggest project enhancements/value engineering opportunities Prepare and track project submittals Facilitate Change Order process, prepare monthly budget analysis, and projections/cost to complete Manage CPM baseline and updates Manage RFI's and engineering-related inquiries Assist with project purchase orders and subcontracts Ensure all project materials are approved, delivered and tracked accordingly Coordinate with the finance department to prepare, review and evaluate monthly costs Update and maintain the company ERP system with all current project information in the appropriate programs Desired Qualifications 5+ years of relevant experience, ideally in construction management Bachelor's Degree in Construction Management Utility Engineering preferred Experience with ERP management and improvements Proficient in the use of Microsoft Office and standard computer applications Display a high level of initiative, effort, and commitment towards completing assignments in a timely manner Ability to identify problems; determine accuracy and relevance of information; use sound judgment to generate and evaluate alternatives, and make recommendations Effective communication skills, interpersonal and organizational skills, and a strong work ethic Why Haugland? Compensation range for this role is 90-120k At Haugland Group, our benefits are designed to convey company culture and values which has employees at its forefront. Excellent benefits package including medical, prescription drug, dental, vision, Health Savings, short/long term disability, and life insurance 401k with 5% employer match Employer funded Dependent Care FSA Potential for annual performance-based raise Paid Time off Paid company observed holidays Educational and professional advancement opportunities Frequent company-sponsored events Relaxed, friendly office Fast paced, exciting environment Haugland Group LLC and its operating divisions, affiliates, related entities, and subsidiaries (collectively, “the Company”) do not accept unsolicited resumes from search firms or employment agencies. Unsolicited referrals and resumes are considered property of the Company and therefore, the Company will not pay a fee for any placement resulting from the receipt of an unsolicited referral. Only upon the Company's written request may preferred vendors may be invited to refer talent for specific open positions. In these cases, a fully executed agreement with the Company must be in place and current. We are an Equal Opportunity Employer.

Shawn's Lawns, Inc. is a specialized contractor offering services in excavation and site development. The company is dedicated to providing expertise in mass earth moving, rock removal and crushing, paving, and demolition projects. With a strong focus on quality and precision, Shawn's Lawns, Inc. is recognized for handling complex projects with efficiency and professionalism. The organization prides itself on being the premier site work contractor in the area. As a family owned business with several high level employees who have been with the company for 20+ years we believe the company has established a great work culture. Role Description We are seeking a full-time Project Engineer to join our on-site team in Stamford, CT. In this role, you will oversee various aspects of site development and excavation projects. Your responsibilities will include project planning, submittals, coordination, management, and ensuring on-time delivery within budgetary constraints. You will also collaborate with cross-functional teams, manage project timelines, and ensure adherence to technical and safety standards. Qualifications Bachelor's degree in Civil Engineering, or a related field preferred Previous experience in excavation, site development, or construction projects is required Strong Communication skills, both written and verbal, to collaborate with team members and stakeholders Proficiency in Project Management and Project Planning to ensure projects are executed effectively and efficiently Expertise in Project Engineering to design, plan, and oversee technical aspects of site development projects Foundational knowledge of site development to support relevant project requirements Ability to solve problems proactively and adapt to on-site project demands Demonstrated ability to manage multiple projects and meet deadlines

Did you love building as a kid? Do you enjoy taking something apart, just to figure out how to put it back together? Do you geek out on robots? Our engineers drive packaging innovation, creating new ways to improve - and increase - performance. We're passionate about designing custom equipment that exceeds our customers' expectations. Our engineers partner closely not only with our customers, but also with peers across sales, manufacturing, and assembly. We offer rewarding, challenging opportunities throughout the world, across multiple packaging segments. If you're excited by how machines work and want to make them better, we want to talk to you. Do we have your attention? Keep reading. Modern Packaging is seeking a talented Mechanical Design Engineer to develop, design, and implement new product designs of automated machinery. Candidate shall have the ability to create new designs, modify existing designs, and provide technical support to customers. The position is located at our Deer Park, NY location and will report to the Director of Engineering. Are you excited about this work? Engineering, design, and fabrication of automated machinery Develop machine drawings, 3D modeling, assembly and detail drawings. Manage projects from quote to FAT (Factory Acceptance Test). Interface with manufacturing to ensure parts are properly fabricated, machined, and assembled. This will include updating revisions to mechanical design specifications/drawings. Interface with assembly department to conduct machine testing and proper operation. Interface with other departments e.g., controls, parts, purchasing, etc., to coordinate work/projects and ensure customer on-time delivery. Create and maintain Bill of Materials. What's in it for you? There's no monopoly on innovative ideas or limits to how far you can advance with our team. We offer an open, communicative environment that fosters individual initiative. We pride ourselves in being a company where people are happy and choose to build a career. In addition to growth opportunities, as a ProMach employee, you receive more than just a paycheck. The education and experience you bring to a role with us matter. Placement within our salary range is determined based upon years of directly relatable experience for your position. These components, along with local and national compensation survey data, contribute to deciding a candidate's potential starting rate of pay. Total compensation includes your pay, potential short-term incentive opportunities, comprehensive medical/dental/vision programs, as well as life insurance, disability insurance, paid time off programs, a retirement savings plan with a company match, and a wellness program. And because we understand the importance of feeling protected, there is no waiting period for benefits - you are eligible on your first day of employment! Please note that the pay ranges listed on external job boards, outside our posting details, do not accurately reflect our internal compensation ranges. Base Salary Range: $95,000 - $115,000 If this sounds like you, we want to connect! Bachelor's degree in Mechanical Engineering or Mechanical Engineering Technology (BSME or BSMET), or similar engineering or technical degree from an accredited four-year college or university or equivalent industry experience in mechanical design required. At least 3 years' experience in design of automated industrial machinery. Experience using AutoCAD and Autodesk Inventor and/or SolidWorks. General knowledge of manufacturing processes, techniques, and practices. Strong analytical skills, ability to utilize knowledge to provide creative design ideas. Excellent verbal and written communication skills. Desire to be hands-on with equipment building & design, ability to work both independently and in a team environment. Pro Mach, Inc. We have been named to the Inc. 5,000 list of the fastest growing private companies in the U.S. seven times. We continue to introduce innovative products, enter new markets, expand our global presence, and actively acquire new capabilities. We have the rewards, opportunities, and the market strengths of a large organization combined with the entrepreneurial culture of a small, fast-paced company. You will enjoy the benefits of working with a growing company that competes globally with the personal touch and feel of a smaller company where you can make an impact every day. Curious about life at ProMach? Follow us on LinkedIn, Twitter, and Instagram! More career opportunities to consider! Pro Mach is an Equal Opportunity Employer. Pro Mach uses E-Verify to verify employment eligibility of all new hires to work in the United States. Pro Mach is a drug-free workplace. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. #MODER

Who We Are Precision Combustion, Inc (PCI) is a leader in innovative clean energy technologies, specializing in advancements in fuel cell systems for terrestrial and space applications, catalytic fuel reforming, chemical processes, and carbon utilization technologies. Our dedicated team is committed to developing solutions that drive efficiency and sustainability in energy applications. Role Overview As a Mechanical Design Engineer at PCI, you will engage in the design, development, and testing of value-added systems and components, including Solid Oxide Fuel Cell (SOFC), integral to our state-of-the-art energy technologies. You will work closely with multidisciplinary teams to bring innovative concepts to fruition and to troubleshoot technical problems, ensuring high-quality and reliable product designs that meet customer needs. Key Responsibilities Design and analyze mechanical components and systems for clean energy applications. Collaborate with cross-functional teams to improve existing designs and develop new product concepts. Execute simulations (Computational Fluid Dynamics, thermal, and FEA), laboratory tests, and validations on mechanical systems to ensure performance and reliability. Prepare and maintain technical documentation including design specifications, test results, reports, and presentations. Utilize CAD tools for detailed design and prototyping of mechanical components. Support the component and prototype manufacturing process with design guidelines and product specifications. Requirements Bachelor's degree in Mechanical Engineering is preferred . 3+ years of experience in mechanical design engineering, preferably in the clean energy or related industries. Ideally with direct experience in the design of SOFCs or with High-Pressure High-Temperature flow systems. Proficient in CAD software (e.g., SolidWorks, AutoCAD) for 3D modeling and design. Strong analytical skills with experience in mechanical simulations (FEM/CFD, FEA analysis). Familiarity with materials selection and manufacturing processes. Excellent communication and teamwork skills to collaborate effectively with cross-disciplinary teams. Proactive approach to problem-solving and innovation. Benefits At PCI you'll find cohesive teams and a culture that promotes open communication and support. We also recognize that we are a team made up of individuals with full lives that extend beyond the work day. Our policies and benefits are crafted with our employees in mind. We offer: A competitive salary and benefits platform (medical/dental/vision; STD/LTD, Life Insurance and more) 401(k) with company match Paid Time Off, 10 paid Holidays, and Paternal Leave Tuition reimbursement for continuing education Flexible work hours Growth and Development opportunities More information can be found on our Career page at pci.energy

Job Description Amphenol Communications Solutions (ACS), a division of Amphenol Corporation, is a world leader in interconnect solutions for Communications, Mobile, RF, Optics, and Commercial electronics markets. Amphenol Corporation is one of the world's largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable. ACS has an expansive global presence in research and development, manufacturing, and sales. We design and manufacture a wide range of innovative connectors as well as cable assemblies for diverse applications including server, storage, data center, mobile, RF, networking, industrial, business equipment, and automotive. Position: Mechanical Engineering Intern 2026Summer Intern Program Location: Hamden, CT Amphenol Spectra-Strip is enabling the electronics revolution with wire and cable solutions. We are the market leader for products that power the internet, cloud compute and artificial intelligence. We make components that run at 224Gbps per lane and can download 100 full length HD movies in a single second. Amphenol is a great place with outstanding engineers working on the fastest signals, with all the software and equipment needed to be successful. We are currently seeking a Product Development Engineer to join our team to lead product innovation in design, validation, and launch phases. RESPONSIBILITIES: This role supports our Mechanical Engineering group. You will work closely with internal engineers and manufacturing personnel, supporting the development and validation of product prototypes through polit production. This position also works within the production area, creating and testing designs. What you'll do: Gain Experience! Support the product design effort through analysis, testing, and deployment Generating detailed technical drawings Gather test data to support R&D activities Support production with fixture designs Identify process deficiencies and help develop solutions to improve those deficiencies QUALIFICATIONS: A good candidate should be at least a sophomore in a Mechanical Engineering program Experience with solid modeling tools (SolidWorks) Ability to communicate with technical & non-technical people Ability to work in team environment Amphenol Corporation is proud of our reputation as an excellent employer. Our main focus is to provide the highest level of support and responsiveness to both our employees and our customers, the world's largest technology companies. Amphenol Corporation offers the opportunity for career growth within a global organization. We believe that Amphenol Corporation is unique in that every employee, regardless of his or her position, has the ability to positively impact the business. This position requires access to controlled technology that is subject to US export controls. Qualified candidates must be a US Person (including US Citizen, lawful permanent resident, or protected individual as defined by 8 U.S.C. 1324b(a)(3)) or eligible to obtain required authorization(s) from the U.S. Government. Amphenol is an "Equal Opportunity Employer" - Minority/Female/Disabled/Veteran/Sexual Orientation/Gender Identity/National Origin For additional company information please visit our website at ****************************

IntroductionASML US brings together the most creative minds in science and technology to develop lithography machines that are key to producing faster, cheaper, and more energy-efficient microchips. We design, develop, integrate, market, and service these advanced machines, enabling our customers-the world's leading chipmakers-to reduce the size and increase the functionality of their microchips, which in turn leads to smaller, more powerful consumer electronics.We are currently recruiting for an internship located at our office in Wilton, CT.Your AssignmentThis position is for a Production Engineering First Line Support (FLS) Intern with an innovative attitude. The intern will provide support to the mechanical/mechatronics production engineering team, including: Data analysis, procedure writing, factory floor troubleshooting, and continuous improvement projects. Spending time in the cleanroom providing direct support to production processes and conducting time studies when needed. Working in an office environment on continuous improvement and process development for production. Projects are tailored to candidate skills and can include: Automation enhancements and programming Tooling and design improvements Cycle time reduction initiatives Supporting troubleshooting and improvement of mechanical assembly and alignment issues, module testing, final quality concerns, and manufacturing tooling challenges. Performing analysis on mechanical performance data and deriving actionable conclusions. Evaluating and dispositioning failed parts with proposed solutions. Assisting in the development of manufacturing procedures and technical work instructions, as well as participating in design and document reviews. Your Profile Pursuing a Bachelor's or Master's degree in Mechanical Engineering, Mechatronics Engineering, or a related field. (minimum of 3 years completed) SkillsWorking at the cutting edge of technology means new challenges and problems to solve every day-and collaboration is key. You'll be part of a creative, dynamic work environment where you'll work with supportive colleagues and have the flexibility to choose how best to tackle tasks.To thrive in this role, you'll need: Ability to read and interpret mechanical drawings and technical documentation. Familiarity with CAD tools (e.g., SolidWorks, NX) and mechanical design principles. Knowledge of mechatronic systems, actuators, sensors, and precision motion control is a plus. Experience with data analysis tools such as MATLAB, LabVIEW, or Python is beneficial. Understanding of manufacturing processes, tolerances, and assembly techniques. Ability to learn and apply new information quickly. Strong attention to detail and accuracy. Ability to work on multiple projects and communicate solutions effectively. Other InformationThis position is located on-site in Wilton, CT. It requires in-person presence for work-related events, training courses, and meetings to ensure teamwork, collaboration, and innovation.Additional Responsibilities: There is potential for exposure to strong magnetic fields, high voltage and currents. This position requires access to controlled technology, as defined in the United States Export Administration Regulations (15 C.F.R. § 730, et seq.). Qualified candidates must be legally authorized to access such controlled technology prior to beginning work. Business demands may require ASML to proceed with candidates who are immediately eligible to access controlled technology. Inclusion and diversity ASML is an Equal Opportunity Employer that values and respects the importance of a diverse and inclusive workforce. It is the policy of the company to recruit, hire, train and promote persons in all job titles without regard to race, color, religion, sex, age, national origin, veteran status, disability, sexual orientation, or gender identity. We recognize that inclusion and diversity is a driving force in the success of our company. Need to know more about applying for a job at ASML? Read our frequently asked questions. Request an Accommodation ASML provides reasonable accommodations to applicants for ASML employment and ASML employees with disabilities. An accommodation is a change in work rules, facilities, or conditions which enable an individual with a disability to apply for a job, perform the essential functions of a job, and/or enjoy equal access to the benefits and privileges of employment. If you are in need of an accommodation to complete an application, participate in an interview, or otherwise participate in the employee pre-selection process, please send an email to USHR_Accommodation@asml.com to initiate the company's reasonable accommodation process. Please note: This email address is solely intended to provide a method for applicants to initiate ASML's process to request accommodation(s). Any recruitment questions should be directed to the designated Talent Acquisition member for the position.

Quanex is looking for a Design Engineer to join our team located in New Haven, CT. Come join the Quanex Access Solutions Team (Bilco) where you can be a part of a growing team! The Bilco Brand manufactures a complete line of products that provide access for commercial building applications. Products are available in a number of standard sizes and are custom engineered to meet unique access requirements. We Offer You! * Competitive Salary * Bonus Potential * 401K with 5% company match, yours to keep after 2 years * 15% immediate return if you participate in the company's ESPP * Medical, Dental & Vision Plans * Employer paid disability plans and life insurance * Paid Time Off & Holidays * Various Work Schedules * Tuition support for degree and continuous education * Employee Resource Groups focused on employee empowerment What's attractive about the Design Engineer? * Responsibility for product development within a Lean environment, engineering documentation for all product lines, and product review and testing. * Work in collaborative environment. * Be a part of a growth oriented business. What Success Looks Like: * Initiating product design and innovation. * Ensure that products comply with all applicable codes and regulations. * Determining feasibility of manufacture and modifications necessary to alter construction of a specific product to accommodate customer requirements. * Supporting engineering staff in testing of new product prototypes, or new design applications to customer specifications. * Interacting with customers and meeting their needs. What You Bring: * Bachelor of Science degree in Mechanical Engineering or Industrial Engineering * 5+ years of product development experience * Excellent verbal and written communication skills * The ability to work closely with other engineers and others, including external customers, in a team environment. * Experience with root cause problem solving and driving improvements to designs and processes. * Experience with Solidworks and AutoCAD. The targeted salary range for this position is $78,000-$90,000 with bonus potential. About Quanex, A Part of Something Bigger Quanex (NYSE: NX) is a global, publicly traded manufacturing company primarily serving OEMs in the fenestration, cabinetry, solar, refrigeration and outdoor products markets. We are A Part of Something Bigger by improving the performance and aesthetics of end products through continuous innovation, helping customers achieve greater production efficiencies, dedication to giving back to communities where we operate, producing shareholder value and helping our employees learn, grow, and thrive. Learn more at Quanex.com. #QHP1 #LI-LG1

Power-Flo Technologies is committed to being the premier provider of supplies, services, and solutions to the electrical, industrial, mechanical, and automation industries. We are looking for you to join our collaborative team as a Design Engineer. This is a full-time, on-site role. Primary Functions Responsible for design of electrical panels and schematics to meet customer requirements. Provide panel jobs quotes and estimates. Act as project management on panel jobs. Assist with customer technical support. Post-sales support on core products. Salary commensurate with experience (Range from $45,000 - $145,000 annually) Benefits Package * Medical, Dental, Vision * PTO Program and Paid Holidays * 401K * EAP Design Engineer Essential Responsibilities * Review engineered contract drawings and specifications for the design of electrical control panels. * Design and layout of electrical panels using AutoCAD. * Ensure that all panels are being designed and constructed to UL Standards. * Creating Bill of Materials for the sales engineer team. * Create testing procedures for specific projects to be used by shop personnel. * Determine parameters to program variable frequency drives and soft starters. * Provide technical support on the products we manufacture. Design Engineer Necessary Qualifications * 3 years+ experience in the design of electrical system preferred * Ability to use AutoCAD for electrical design work. * Hold a degree in the engineering field. * Must have a valid and clean driver's license to travel to job sites and other branches as needed. Design Engineer Physical Requirements * Some Minor Lifting and Moving of Parts and Equipment We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

FLSA Status: Salary/Exempt Reports To: General Manager Direct Reports: None Power Connector, LLC is entering a new and exciting phase of growth and opportunity filled with innovative and progressive thinking and strategizing. In December 2021, Power Connector was acquired by the Trexon Global network. With this historic transition comes the need to enhance and grow the company through restructuring, reorganization, modernization, optimization, and business development. We, at Power Connector, are responsible for revolutionizing the company and securing and expanding its global connection. Power Connector's Design Engineer is critical in contributing to the fundamental changes that are transforming Power Connector. This position is instrumental in enhancing and strengthening our design capabilities to enable the growth and development of the business by driving innovation and improvements via New Product Introduction and connector design iterations and enhancements. This position's primary focus is to contribute and execute on the team's strategic plans for design innovation and product line sustainability and expansion. Power Connector's Design Engineer is a dynamic, adaptable, open-minded problem solver with exceptional technical and analytical skills. This position plays a key role in sustaining and enhancing our current capabilities and output through strategic planning and engineering to increase efficiency and productivity in all design engineering disciplines. This position enjoys the inherent challenges of sustaining and growing a business by optimizing engineering processes and introducing new approaches to design in a diverse and dynamic organization. This position has a strong influence on the fundamental principles guiding design structure and functionality and works closely with the General Manager to realize the company's true designing potential. Responsibilities • Assist with research and development, new product introduction, and production deployment. • Create CAD models, drawings, specification sheets, and prototypes for new and existing products. • Modify existing products to improve efficiency and performance. • Design for manufacturability. • Research materials and production costs to determine manufacturing requirements. • Ensure product designs conform to customer and government specifications. • Test designs to ensure they meet safety, usability, and environmental impact standards. • Analyze data from tests and identify opportunities for improvement. • Collaborate with engineering, sales, procurement, and production teams. • Present designs and prototypes to customers and colleagues. • Create BOMs and routings for new products, legacy products, and engineering changes as necessary. • Develop and manage costing analysis as necessary during product development and deployment. • Create part numbers, assign classification, build product structure and Bill of Materials, generate routings, assign standard labor times, etc. for all levels of components and assemblies in current MRP system. • Manage and participate in product design reviews to provide input on design and manufacturing requirements, functional requirements, capacity, potential failure modes, etc. • Manage projects, including budgets, schedules, and costs when applicable. • Perform DFMEAs, PFMEAs, and Risk Assessments. • Ensure that the company's designs and designing processes comply with all government laws and regulations. • Review and calculate labor, material, and other production costs along with reviewing schedules and future production requirements to assist management in decision-making. • Collaborate with quality team to assure products are being produced to applicable specifications. • Evaluate quality control processes and make recommendations for improvements in quality control. • Devise procedures to inspect and report quality issues. • Assure the reliability and consistency of product manufacturing by checking processes and final output. • Facilitate proactive solutions by collecting and analyzing manufacturing data. • Document and optimize design procedures to ensure replicability and compliance with internal and external standards. • Contribute to internally driven and customer-driven Root Cause Corrective Actions and failure analysis. • Assist in the preparation for quality audits. • Any additional tasks necessary to execute on the team's strategy for design sustainability, improvement, and optimization. Minimum Qualifications Education and Experience • Bachelor of Science in engineering or related field • 3-10 years of design engineering or relevant experience • 2-5 years of electrical connector design experience Knowledge • Ability to create 3D Computer-aided design (CAD) models and drawings • Ability to read drawings, specifications, test procedures, etc. • Fundamental mathematical and physical principles • Proficient in MS Office • Geometric Dimensioning and Tolerancing (GD&T) Skills • Good oral and written communication and presentation skills • Great interpersonal skills • Excellent organizational skills • Results-oriented with strong analytical skills • Ability to work well independently and part of a team • Ability to motivate team members in a creative and effective manner • Ability to work effectively under stressful and dynamic environments Other responsibilities, initiatives and ad-hoc projects as required. Compensation range: $90,000 - $125,000

Job Description Design Engineer Bohemia, NY * US Citizenship is required for this role * If you're ready for the challenge of working for a dynamic organization, Dayton T. Brown, Inc. has a career opportunity available for a hands-on Design Engineer to join our growing Engineering and Test Division. Our three divisions, Engineering and Test, Technical Services, and Mission Systems, make DTB a diverse and interesting place to work. Dayton T. Brown, Inc. is a premier leader as an independent testing laboratory providing testing and engineering services. We support customers across all platforms and services in the military, aerospace, shipboard, railway, weapons manufacturers, automotive and consumer industries worldwide. The ideal candidate will be able to hit the ground running, must take a hands-on approach to their work, be flexible in their duties, and be a proven self-starter. Responsibilities include, but are not limited to: Design custom structural test fixtures that meet customer statement of work requirements Create fixture concepts based on requirements Develop a design from concept through completion based on discussions with the internal engineering team and end user/customer Interfaces with customers and the engineering team to translate design needs Participate in and conduct initial and ongoing design reviews Select appropriate structural material based on engineering analysis Use Autodesk Inventor to create drawings of machined parts, weldments, schematics and top and sub-assemblies Create drawings to commercial standards that can be used for fabrication and assembly Prepare bills of materials that include fabricated parts, standard hardware, and applicable test instrumentation Apply tolerances to ensure parts are produced with the desired fit Demonstrate a basic understanding of data acquisition systems and hydraulic/pneumatic control systems. Familiarity with various fabrication methods Prepare fabrication plan and fixture assembly procedures Act as the technical contact for the fabricators and assemblers during the production phase of projects Supporting quoting efforts for Design/Fabrication as needed Collaborate with Project Managers to status ongoing projects Provide project engineering support during all aspects of the test program Manage test programs. Some of the areas of testing include structural testing, armament, pressure, and windblast. Coordinate required resources and schedule required to conduct testing Interface with customers Write test procedures and test reports Travel as required within the continental US Overtime will be required during certain periods of a project Required Qualifications: BSME or comparable 4+ years' experience working as a Design Engineer Currently hold an FE certification and eligible to go for a PE A PE licensure will eventually be required Strong proficiency using Autodesk Inventor/ Assembly handling or equivalent software Experience in mechanical CAD design (Autodesk Inventor), ability to perform simple design hand calculations, fixture design, and especially fixture design for testing products Knowledge of FEM/Analysis Must be a US Citizen and able to pass a drug test and background check Expertise in defense, aerospace, telecom, commercial, and/or automotive product qualification requirements Ability to read and interpret test specifications Must be computer literate, including MS Office Must be able to work in a fast-paced work environment Ability to work without supervision and to provide technical consultation and guidance Experience managing labor and resource schedules Strong communication skills, both written and verbal Demonstrated technical innovation/guidance, project management, and problem solving Ability to work without supervision, with latitude for independent action and decision making Preferred Qualifications: Experience in using FEM software like ANSYS is a plus but not required Experience with CNC machining beneficial but not required Dayton T. Brown, Inc. offers: Competitive salaries Tuition Reimbursement at up to 100% Medical/Dental/Vision/FSA 401k with company matching Paid time off Group life insurance Employee activities A family-friendly work culture Cash incentives and recognition awards Dayton T. Brown, Inc. is an equal opportunity employer - Veterans and Disabled. Job Posted by ApplicantPro

Job Description The Design Engineer 3 is a senior level engineer who provides engineering support on systems, system elements, interfacing systems, components, devices and/or processes. Possesses broad knowledge of industry practices, standards, and technology areas. Works as either technical or programmatic lead of a team and assists with solving complex problems in an engineering discipline. Develops strategic and implementation plans. Essential Functions Works on multiple highly complex major projects requiring innovative, original solutions May plan multiple projects simultaneously. Estimates, tracks & completes project on time and within budget. Subject Matter Expert in at least one area or system. Strong technical, proposal and report writing skills with ability to collect or generate all necessary backup material. Exercises considerable latitude and technical judgment in deciding work methods. Can lead a group of engineers and technicians, responsible for budget and manpower estimates. Develops innovative solutions to unique problems. Works mostly independently with minimal supervision. Exercises substantial initiative/ judgment in work methods and in interpreting goals. Able to give effective presentations to critical/high level customers. Knowledgeable in all technical areas of the group's scope or having a demonstrated ability to achieve that level of proficiency in a short period of time. Responsible for large and fairly complex projects. Ability to work well with and mentor both high and low performers in a team or group environment, setting expectations, and providing input and feedback in a helpful way that fosters accountability. Ability to deal with personnel problems in a constructive manner. Proven leadership skills. Identifies problems and actively devises appropriate solutions. Ability to continuously improve through additional training or research Qualifications/Minimum requirements U.S. Citizenship Required. BSME or equivalent educational degree required. Minimum six (6) years or demonstrated capability in an Engineering role, experience within a manufacturing environment and aerospace industry preferred. Strong knowledge of AS9100 and ISO requirements. Ability to read, write, and speak in English proficiently. Strong work ethic; can work independently or in a group. Highly professional with excellent telephone etiquette. Must be detail oriented, self-motivated and the ability to multi-task in a fast-paced environment. Salary Range: $90k to $100k annually. This estimated range represents a good faith projection of what we believe is a competitive compensation range for this position. Please understand that the offered salary will be determined based on factors such as the applicant's credentials, experiences, and the specific requirements of the role, as well as potential internal equity and external market considerations. We do not customarily hire at the top end of the range. East/West adheres to pay transparency and equity principles and strives to remain competitive within the market. The full compensation package will be shared and discussed during the hiring process. In addition to the base salary, East/West is committed to supporting our team's well-being and professional growth through a comprehensive benefits package. This generous benefits package, includes but is not limited to: Medical Dental, Vision, Life Insurance, Long-Term Disability Aflac Voluntary benefits (Critical Illness, Accident, Hospital, STD) PTO (3 weeks accrued first year!) 10 Paid Holidays Flexible Spending Accounts 401(k) with matching Pet Insurance 9/80 work week (Every other Friday off) Job Title: Design Engineer 3 Reports To: Engineering Manager FLSA Classification: Exempt Job Type: Full time EOE/Disability/Veteran EAST/WEST INDUSTRIES INC . is a woman-owned small business located in Ronkonkoma, NY. We are a world leader in the development and production of aircraft seats and life support systems for high-performance military aircraft, and ground support equipment for servicing such aircraft. Job Posted by ApplicantPro

Established in 1991, Collabera has been a leader in IT staffing for over 22 years and is one of the largest diversity IT staffing firms in the industry. As a half a billion dollar IT company, with more than 9,000 professionals across 30+ offices, Collabera offers comprehensive, cost-effective IT staffing & IT Services. We provide services to Fortune 500 and mid-size companies to meet their talent needs with high quality IT resources through Staff Augmentation, Global Talent Management, Value Added Services through CLASS (Competency Leveraged Advanced Staffing & Solutions) Permanent Placement Services and Vendor Management Programs. Collabera recognizes true potential of human capital and provides people the right opportunities for growth and professional excellence. Job Description Supports the manufacture of products to ensure Operations core metrics are successfully achieved. Provides technical leadership and support of manufacturing improvements and floor support for assigned product lines. Principal Accountability: Provides engineering support for troubleshooting efforts for any process issues in designated area. Summarize and draw conclusions from test results leading to effective technical resolution of process problems. Develops and maintains the documentation necessary to ensure the consistent manufacture of MITG products (processes, drawings, and shop floor paperwork). Works with Process Development engineers to ensure design for manufacturing elements are incorporated into PDP activities. Identifies, justifies, and implements significant data driven projects to reduce manufacturing costs, improve processes, increase product reliability, and enhance process capability. Designs and evaluates new and existing fixtures and equipment, test methods, specifications, layouts, and standards supporting a Lean manufacturing environment. Identify and recommend manufacturing technologies to strategically develop business objectives and potential opportunities. May have supervisory responsibility for technician staff. Comply with applicable FDA and international regulatory laws/standards and the MITG Code of Conduct. Other duties as assigned or required Additional Information Please contact: Sagar Rathore ************ ******************************

Headquartered in Old Saybrook, CT, Infiltrator Water Technologies is the leading provider of engineered plastic chambers, synthetic aggregates, tanks, advanced wastewater treatment systems, and accessories for the onsite/decentralized wastewater and storm water management industries. The majority of Infiltrator products are manufactured from recycled plastic. Founded in 1987, we operate throughout the US and Canada with 8 manufacturing plants in the US, dedicated sales, and corporate team members. Infiltrator is a pioneer in innovative plastic technologies for underground water management. Infiltrator components are used in most onsite septic systems installed in the United States and Canada. Infiltrator is a proud Corporate Partner of Habitat for Humanity and each year donates components for 50 septic systems serving Habitat homes in North America. Infiltrator is committed to advancing the state of the art in all fronts, including product design, manufacturing, materials, wastewater science, marketing, management, and employee development. In other words, we strive to be the best we can be. Responsibilities Infiltrator Water Technologies has an exciting new role available - Product Design Engineer II. We are seeking an experienced and talented Mechanical Engineer with expertise in plastic design. Here is a bit about the role: New Product development including engineering concept, design analysis, calculations and problem solving. Conduct form/fit feasibility studies on new product concepts. Address product design issues with respect to tooling and manufacturing with other team members. Provides technical support to other departments. Works directly on the development of prototype parts. Responsible for CAD design, drawings and changes. Responsible for conducting design reviews and drawing reviews Apply project management principles to define task workload and timelines. Assure technical quality and design process rigor in execution of all assigned tasks. Apply product lifecycle management approach through PDM software QUALIFICATIONS: Excellent written/verbal communication skills and superior interpersonal skills for interaction with all levels of personnel and contacts within and outside IWT. S. in Mechanical Engineering, preferably with a concentration in plastics part design and molding. Proven creative skills in product design and problem solving through coursework or personal interests. Must have at least 5+ years designing 3D (physical) products that have a high percentage of plastic materials. Hands-on physical skills associated with product development extremely important. Experience with working in a shop environment and ability to make simple prototypes highly desirable. 5+ years with CAD experience required; SolidWorks preferred. Experience with a range of materials (particularly various plastics) and processes (injection molding, thermoforming). Must possess a comfort level with (and interest in) working in a very fast-paced product development environment where ideation and product design rapidly evolve. #HP EEO Statement ADS supports an inclusive workplace that values diversity of thought, experience, and background. We celebrate the power of our differences to create better solutions for our customers by ensuring employees can be their authentic selves each day. ADS is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ancestry, age, physical or mental disability, sex, sexual orientation, gender identity/expression, pregnancy, veteran status, marital status, creed, status with regard to public assistance, genetic status or any other status protected by federal, state or local law.

Job Type: Full-Time, On-Site Reports to: Vice President of Engineering Salary: $115,000 - $140,000 TEC Building Systems is a leader in the design, installation, and maintenance of Building Automation and Control Systems in the New York City, Metropolitan area; providing advanced control system solutions to the commercial, institutional, transportation, healthcare, and large-scale residential markets. We are currently seeking control system design engineers with various levels of experience to join the engineering group of our rapidly expanding organization. Control System Design Engineers are responsible for managing the design phase of projects, creating highly functional, cost-effective control system designs that comply with project plans and specifications. The design phase includes: Reviewing contract plans, specifications, proposals, and budgets. Developing design project delivery schedule. Designing DDC control panels, wiring schematics, and system interfaces to control building mechanical, electrical, and plumbing systems. Selecting control system products and developing project bill of materials. Documenting system sequence of operations and operating parameters. Designing BMS communication networks. Developing electrical installation wiring diagrams and scopes of work. Senior Design Engineer: 10+ years of experience. A senior design engineer works independently or leads a team in the design of large, highly complex control system designs. Must demonstrate the ability to handle and lead all control system design aspects associated with complex mechanical and building systems across numerous vertical markets. Able to train, oversee and supervise others. Required skills: Knowledgeable in building mechanical, electrical, and plumbing (MEP) systems. Able to read and understand architectural, mechanical, electrical, fire protection, and communication systems contract drawings and specifications. Proficient in AutoCAD, Bluebeam, and Microsoft Office suite. Excellent oral and written communication skills. Able to work on multiple projects and varying project teams. Degree in electrical or mechanical engineering preferred.

Quanex is looking for a Design Engineer to join our team located in New Haven, CT. Come join the Quanex Access Solutions Team (Bilco) where you can be a part of a growing team! The Bilco Brand manufactures a complete line of products that provide access for commercial building applications. Products are available in a number of standard sizes and are custom engineered to meet unique access requirements. We Offer You! Competitive Salary Bonus Potential 401K with 5% company match, yours to keep after 2 years 15% immediate return if you participate in the company's ESPP Medical, Dental & Vision Plans Employer paid disability plans and life insurance Paid Time Off & Holidays Various Work Schedules Tuition support for degree and continuous education Employee Resource Groups focused on employee empowerment What's attractive about the Design Engineer? Responsibility for product development within a Lean environment, engineering documentation for all product lines, and product review and testing. Work in collaborative environment. Be a part of a growth oriented business. What Success Looks Like: Initiating product design and innovation. Ensure that products comply with all applicable codes and regulations. Determining feasibility of manufacture and modifications necessary to alter construction of a specific product to accommodate customer requirements. Supporting engineering staff in testing of new product prototypes, or new design applications to customer specifications. Interacting with customers and meeting their needs. What You Bring: Bachelor of Science degree in Mechanical Engineering or Industrial Engineering 5+ years of product development experience Excellent verbal and written communication skills The ability to work closely with other engineers and others, including external customers, in a team environment. Experience with root cause problem solving and driving improvements to designs and processes. Experience with Solidworks and AutoCAD. The targeted salary range for this position is $78,000-$90,000 with bonus potential. About Quanex, A Part of Something Bigger Quanex (NYSE: NX) is a global, publicly traded manufacturing company primarily serving OEMs in the fenestration, cabinetry, solar, refrigeration and outdoor products markets. We are A Part of Something Bigger by improving the performance and aesthetics of end products through continuous innovation, helping customers achieve greater production efficiencies, dedication to giving back to communities where we operate, producing shareholder value and helping our employees learn, grow, and thrive. Learn more at Quanex.com. #QHP1 #LI-LG1

Summary:This position is responsible for the design and development of beauty display components, including vacuum trays, injection trays, fabricates, corrugated structures, and end caps. The role involves 3D modeling, high-quality rendering, and the preparation of detailed 2D engineering drawings. In addition, the designer will produce high-precision prototype samples using laser cutting machines and 3D printers. Success in this role requires a balanced understanding of aesthetic design principles and practical engineering applications.Job Description: • Create 3D design models for beauty display products, including vacuum trays, injection trays, and corrugated/fabricated parts • Produce high-quality rendered visuals for client presentations and internal reviews • Generate accurate 2D engineering drawings to support manufacturing and prototyping • Operate laser cutting machines and 3D printers to fabricate prototype samples • Collaborate closely with cross-functional teams, including engineering, product development, and marketing • Ensure that all designs are optimized for cost-effective manufacturing and material use • Continuously improve processes and stay updated with the latest design and prototyping technologies Benefits Premium Medical Insurance Coverage 401(k) Savings Plan Paid Time Off (PTO) based on seniority Paid Holidays Additional Workplace Offerings (subject to change or eligibility.) Annual Bonus Plan Onsite Employee Fitness Center with Indoor Racquetball Court and Yoga Room Summer Fridays Complimentary Gourmet Breakfast, Lunch, and Dinner Relocation Support for New Hires Work Anniversary Recognitions Congratulatory & Condolence Gifts Employee Referral Bonus Program License/Certification Reimbursements Corporate Employee Discounts Visa Sponsorships (100% paid by the company) i.e., New H-1B, H-1B Transfer, O-1, and Green Card Commuter Support (Shuttle Bus Program and EZPass Support) Vehicle Perks Qualification(s):Education(s):Bachelor of Science (B.S): Industrial Design (Required), Bachelor of Science (B.S): Mechanical Engineering (Required) Work Experience:Experience Range I: 0 - 2 years of relevant experience or industry exposure in a related field Skill(s):3D Designing, Adobe Photoshop, Luxion KeyShot, Product Engineering, Siemens NX, SolidWorksLanguage(s):EnglishCertification(s):Not Applicable The anticipated compensation range is 19.25 - 36.55 USD Hourly Actual compensation will be determined based on various factors including qualifications, education, experience, and location. The pay range is subject to change at any time dependent on a variety of internal and external factors. Kiss Nail Products, Inc., KDC GA Corp., Ivy Enterprises, Inc., AST Systems, LLC, Red Beauty, Inc., or Dae Do, Inc. (collectively, the “Company”) is an equal opportunity employer and is committed to a diverse and inclusive workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, or any other characteristic protected by law.

This is an entry level position in manufacturing engineering as part of our manufacturing training and development program. This position will provide an excellent developmental opportunity in operations and manufacturing combined with practical hands on projects contributing directly to the performance and success of the company. This position develops and improves manufacturing processes by studying product and manufacturing methods as well as drives product and process changes to reduce cost and lead time and improve quality and delivery. The position will include a mentorship and corporate exposure. Roles and Responsibilities: • Support manufacturing production processes with all required technical needs. • Develop and improve manufacturing processes by deploying product and manufacturing method enhancements. • Determine product and process manufacturing flow and sequences, material and labor requirements, and quality inspection points. • Create and maintain manufacturing routers and processes • Must be able and willing to work extra time as necessary to ensure completion of assigned tasks Experience in a manufacturing environment desirable.

Trexquant is a growing systematic fund at the forefront of quantitative finance, with a core team of highly accomplished researchers and engineers. We are in the process of optimizing and reimagining our quant platform to keep pace with our expanding trading operations. To support our rapid growth, we are seeking a talented C++ Trading & Simulator Engineer to join our growing technology team and help build the next generation of trading systems and analytics platforms. As a C++ Trading & Simulator Engineer, you will work closely with quantitative researchers and traders to design, develop, and optimize high-performance systems for algorithmic trading. Your responsibilities will include building and maintaining the core infrastructure for trading simulations, data pipelines, and low-latency execution platforms. The ideal candidate will have a strong background in C++ development, and experience in creating scalable, low-latency, high-throughput systems.