Mechanical engineering internship jobs in Hamilton, OH

Mechanical Engineering Co-op/Intern - Summer 2026 This reflects potential openings for the Summer 2026 Co-op/Internship Session (May-August). This is a general job description and represents multiple openings in various departments. Honda offers both single and multi-semester co-ops and internships. College students must apply to the requisition pertaining to their major and semester of interest. Please note: Sponsorship for employment visa status for these positions is unavailable. Applicants requiring sponsorship for employment visa status now or in the future (e.g., F-1 CPT/OPT, H-1B, TN, etc.) will not be considered. More about the Mechanical Engineering Co-op/ Intern at Honda The below descriptions reflect potential environments and duties within our various Mechanical Engineering Co-op/ Intern positions that we offer. Work environments and projects may include but are not limited to: Manufacturing: * Focus on equipment, process, quality and new model activities related to the department of placement (i.e Assembly department, Weld department, Paint department, Stamping department, Casting and Machining department, etc) * Project management * Problem analysis * Investigating new technologies and implementing countermeasure Quality: * Learning and performing vehicle testing * Conducting tests for chassis, brakes, controls, bonnet, trunk and/ or door systems * Testing procedures and fixtures * New model development, drawing, layouts and design change requests * Investigating and providing countermeasures for mass production design related issues * Warranty data trend analysis * Re-creating problem failures to determine root cause, develop countermeasures and perform confirmation testing Purchasing: * Assessing supplier process capabilities * Problem reporting and analysis. * Implementing countermeasures * Verifying and judging effectiveness * Investigating suspect part issues and approving part changes * Approving and verifying supplier countermeasures * Issuing trouble reports * Various daily tasks such as attending meetings, working on assigned project activities, problem analysis, writing technical reports, troubleshooting manufacturing or quality problems and communicating to internal/ external customers Facilities: * Updating and documenting Computer-Aided Design (CAD) drawings of existing infrastructure * Analyzing and designing existing sanitation, Heating, Ventilation, and Air Conditioning (HVAC) and building pressure systems * Developing short and long-term solutions to problems found * Designing modifications of existing facilities infrastructures * Updating mechanical engineering specifications and standards * Reviewing electrical drawings * Learning and understanding plant power infrastructure * Verifying electrical panel schedules * Updating highbay light location Tooling Equipment: * Designing manufacturing equipment and tooling in 2D and 3D Computer-Aided Design (CAD) systems * Determining equipment electrical hardware, software (Programmable Logic Controller (PLC), Human-Machine Interface (HMI), etc.), safety requirements and appropriate design * Managing a schedule and tracking daily processes * Investigating and troubleshooting problems during installation and manufacturing Research and Design: * Supporting the development of vehicle testing and countermeasure analysis (assisting with problem and data analysis, countermeasures, test set-up, data acquisition, test monitoring, recording activities, performance testing and reporting results) * Assisting design engineers in developing/ designing of future models and supporting the creation of drawings * Computer-Aided Design (CAD) Design * Cost and weight calculations * Attending meetings and working with various design/ test groups, suppliers, manufacturing groups, etc. What you need to be successful in this role Required: * Legally authorized to work in the U.S. without sponsorship * General Engineering Coursework * Minimum 2.5 Cumulative GPA or higher (You will be required to provide your current transcript) * Class status- Sophomore (by credit hour) or above * Availability to work a minimum of 10 weeks at 40 hours per week. * Enrollment in a bachelor's or master's degree program studying Mechanical Engineering or related field. * Valid U.S. Driver's License (exceptions considered on a case-by-case basis) * Ability to provide own transportation to and from work each day. Desired: Auto Computer Aided Design (AutoCAD), Computer-Aided Three-Dimensional Interactive Application (CATIA), Manufacturing related coursewor Position Locations Mechanical Engineering Co-op/Intern positions are offered in the cities/ states listed below, if you are selected to move forward in the process, you will be given the opportunity to make selections on your location preferences: * Anna, Ohio (45 minutes north of Dayton, Ohio) * Marysville, Ohio (45 minutes northwest of Columbus, Ohio) * Raymond, Ohio (45 minutes northwest of Columbus, Ohio) * East Liberty, Ohio (55 minutes northwest of Columbus, Ohio) * Russells Point, Ohio (30 minutes northwest of Marysville, Ohio) * Greensburg, Indiana (55 minutes southeast of Indianapolis, Indiana and 60 minutes northwest of Cincinnati, Ohio) * Lincoln, Alabama (45 minutes northeast of Birmingham, Alabama) * Timmonsville, South Carolina (20 minutes southwest of Florence, South Carolina) * Swepsonville, North Carolina (15 minutes SE of Burlington, North Carolina) Honda Co-operative and Learning Internships Program Benefits Housing Accommodations: Honda offers housing at a shared cost, or a housing stipend based on location for our Co-ops and Interns. It is not required to opt-in to but is available should you need housing at the time of your Co-op/ Internship with Honda. Honda Business Resource Groups: One of the ways Honda gives diversity a voice is through its business resource groups. The associate-led, company-supported groups have members aligned across different dimensions of diversity such as gender, ethnicity, ability, life stage and experiences. The groups provide networking opportunities, a chance to give back and professional development. Some groups have even given feedback on Honda products, making them more appealing to all. Embracing all views is what will drive us into the future. Honda wants passionate, driven people to be a part of that future. Performance Feedback: Honda Co-ops and Interns will have the opportunity to receive informal and formal feedback from their leaders, ask questions and express future interest in a scheduled mid-term and final evaluation. Mentorship: Each Co-op/ Intern is assigned a mentor in your department to help you navigate your time at Honda. On-site Wellness Center: Co-ops and Interns have access to join our Wellness Centers (varies by location). Our Wellness Centers are full gyms equipped with cardio machines, weights, basketball courts, pools, dieticians, personal trainers and group fitness classes. Paid overtime: Co-ops and Interns will receive 1.5 times their hourly rate of pay for any overtime worked. Hourly Wage Range: $27.22-$35.22 Pay will be based on several variables that include, but not limited to, geographic location, work experience, education, etc. Consideration for full time employment: Our Cooperative Learning Internships program is utilized as a talent pipeline for our full-time positions! Additional details regarding Honda Co-op and Intern benefits are provided upon offer.

**CMTA, a Legence company** CMTA (********************** is one of the fastest growing engineering firms in the U.S., with nationally recognized expertise in sustainable, high-performance building engineering. We are a collaborative, innovative, and energetic team that leverages a data-driven, holistic approach to consulting engineering, performance contracting, and zero energy projects. We focus on finding engineers whose skills and personalities drive them to excel, fostering a workplace that provides unparalleled growth and career opportunities. For college students interested in engineering design for the built environment, CMTA has a robust co-op program for students pursuing a degree in Mechanical Engineering, Electrical Engineering, and Architectural Engineering. We offer an opportunity for students to immerse themselves for one or more semesters in the consulting engineering world. Our co-ops build industry competitive skills in a hands-on environment, all while working on a team, and being trained by Professional Engineers in AutoCAD and Revit. The skills our co-ops learn allow them to create real construction drawings for real CMTA projects. This position is a full time (40 hrs./week), **onsite** position with a competitive hourly pay rate and eligible for overtime pay. **This position will start May 2026 and go through Summer. Dates are flexible with school calendar.** Our hope is that the co-op students that are hired will do multiple co-op rotations with CMTA with possible consideration for full time employment upon graduation. **Job Description:** This position provides a unique opportunity for hands-on training in mechanical/HVAC/Energy design. The ideal candidate will possess excellent interpersonal skills and be able to work well with a team, and independently. Our engineers will teach the student co-op how we design and implement mechanical systems/infrastructure and implement energy efficient measures in our building projects. This is a great opportunity to work on some of the most challenging and complex MEP projects, and become an important part of our design team. **Job Functions: (may include but are not limited to)** + Produce detailed layout and equipment details of HVAC systems, + Produce one-line diagrams/schematics, + Assist the design team in the process of assembling organized sets of drawings, + May assist in the data collection and/or field verification, and + Work in conjunction with designers and engineers to help develop all aspects of a project. **Requirements** : + Pursuing a Bachelor of Mechanical Engineering or Architectural Engineering, preferably a sophomore (2nd year), or junior (3rd year), + Strong interest in Building Systems Mechanical Engineering, + AutoCAD and REVIT experience preferred, + Strong interpersonal and communication skills, + Proficiency with Microsoft Word and Excel, + Ability to work both independently and with a team, + Ability to work full time throughout the co-op term, + Ability to travel locally for job site inspections, field work, etc. No sponsorship available for this position. \#LI-RH1 #LI-Onsite **About Legence** Legence (****************************** (Nasdaq: LGN) is a leading provider of engineering, consulting, installation, and maintenance services for mission-critical systems in buildings. The company specializes in designing, fabricating, and installing complex HVAC, process piping, and other mechanical, electrical, and plumbing (MEP) systems-enhancing energy efficiency, reliability, and sustainability in new and existing facilities. Legence also delivers long-term performance through strategic upgrades and holistic solutions. Serving some of the world's most technically demanding sectors, Legence counts over 60% of the Nasdaq-100 Index among its clients. **Benefits Overview** **Time Off Benefits:** Paid sick leave **Financial Benefits:** 401(k) retirement savings plan **Reasonable Accommodations** If you need assistance or accommodations during the application or interview process, please contact us at ******************* or your dedicated recruiter with the job title and requisition number. **Third-Party Recruiting Disclaimer** Legence and its affiliates do not accept unsolicited resumes from agencies; any such submissions without a prior signed agreement authorized by Legence Holdings LLC's CHRO or Director of Talent Acquisition will not incur fees and are considered property of Legence. **Pay Disclosure & Considerations** Where pay ranges are indicated, please note that a successful candidate's exact pay will be determined based relevant job-related factors, including any of the following: candidate's experience, skills, and qualifications, as well as geographic and market considerations. We are committed to ensuring fair and competitive compensation for all employees and comply with all applicable salary transparency laws. **Equal Employment Opportunity Employer** Legence and its affiliate companies are proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), marital or familial status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, other non-merit-based factors, and any other characteristic protected under applicable local, state or federal laws and regulations. EEO is the Law **Job Details** **Pay Type** **Hourly**

For college students interested in engineering design for the built environment, CMTA has a robust co-op program for students pursuing a degree in Mechanical Engineering, Electrical Engineering, and Architectural Engineering. We offer an opportunity for students to immerse themselves for one or more semesters in the consulting engineering world. Our co-ops build industry competitive skills in a hands-on environment, all while working on a team, and being trained by Professional Engineers in AutoCAD and Revit. The skills our co-ops learn allow them to create real construction drawings for real CMTA projects. This position is a full time (40 hrs./week), onsite position with a competitive hourly pay rate and eligible for overtime pay. This position will start May 2026 and go through Summer. Dates are flexible with school calendar. Our hope is that the co-op students that are hired will do multiple co-op rotations with CMTA with possible consideration for full time employment upon graduation. Job Description:This position provides a unique opportunity for hands-on training in mechanical/HVAC/Energy design. The ideal candidate will possess excellent interpersonal skills and be able to work well with a team, and independently. Our engineers will teach the student co-op how we design and implement mechanical systems/infrastructure and implement energy efficient measures in our building projects. This is a great opportunity to work on some of the most challenging and complex MEP projects, and become an important part of our design team. Job Functions: (may include but are not limited to) Produce detailed layout and equipment details of HVAC systems, Produce one-line diagrams/schematics, Assist the design team in the process of assembling organized sets of drawings, May assist in the data collection and/or field verification, and Work in conjunction with designers and engineers to help develop all aspects of a project. Requirements: Pursuing a Bachelor of Mechanical Engineering or Architectural Engineering, preferably a sophomore (2nd year), or junior (3rd year), Strong interest in Building Systems Mechanical Engineering, AutoCAD and REVIT experience preferred, Strong interpersonal and communication skills, Proficiency with Microsoft Word and Excel, Ability to work both independently and with a team, Ability to work full time throughout the co-op term, Ability to travel locally for job site inspections, field work, etc. No sponsorship available for this position. #LI-RH1 #LI-Onsite

Applied Optimization (AO) Job Title: Mechanical Engineering Intern Reports to: Principal Scientist FLSA Status: Part Time (Non-Exempt) To support an interdisciplinary research and development team that collects data, analyzes experimental data, and implements new generation scientific algorithms in the areas of mechanical engineering and material science, or space science. Essential Functions: Conduct numerical modeling, mathematics support, and computer programming Support resolution of software issues and requests from customers Support the troubleshooting and debugging of software Assist with enhancement of software functionality Maintain positive customer relations, to include projects status updates Interpret blueprints, technical drawings, schematics, and computer-generated reports Ensure accuracy and follow documentation procedures for all work; maintain notebook of daily activities and provide weekly report of work Other duties as assigned Required Qualifications: Undergraduate or graduate student enrolled in a program related to the field of mechanical engineering with a superior academic record General understanding of software development and knowledge of various coding languages Attention to detail and effective time and schedule management skills Effective organizing, planning, debugging, and problem-solving skills Ability to adapt within a small team to support evolving customer requirements Ability to execute instructions and communication in written, oral, and diagram form Demonstrated strong writing, fact-gathering, and analytical skills Basic computer and software skills including but not necessarily limited to Microsoft Office products (e.g., Outlook, Word, Excel, and Power Point) Preferred Qualifications: College sophomore or junior with a cumulative GPA (Grade Point Average) of 3.5 or higher A minor degree or dual degree in mathematics, computer science, computer engineering, or physics Knowledge or experience in C++ object modeling/software development, MATLAB programming, or other coding languages Ability to occasionally work 2nd shift preferred Citizenship/Security Clearance Requirements: U.S. Citizen or Green Card Holder May be required to obtain and maintain U.S. Government Security Clearance About Our Internships: Hours: The internship is a part-time, year-round position that requires a minimum of sixteen hours per week of work. The hours are flexible and they can change from one semester to another based on the students class schedule. The weekly hours can be adjusted to balance for the examinations, tests and project submissions. About Us: Applied Optimization is a growing organization located in Fairborn, OH. We are an equal opportunity employer offering a competitive salary that is commensurate with qualifications and a comprehensive benefits package. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, physical or mental disability, protected veteran status, or any other characteristic protected by applicable law. Find out more about us at ***************** This job description is subject to change.

OTC Industrial Technologies is looking for an enthusiastic Mechanical Engineer Intern to join our summer of 2025 internship program. This internship will support our Engineering Team & Quality in projects such as: * Provide Technical and administrative support to the Engineering Group * Read mechanical & Electrical Blueprints and be able to troubleshoot equipment, in both mechanical & electrical systems * Review/create bill of materials & scope of work documentation * Review product specifications and create internal equipment standards * Ability to revise electrical schematics in AutoCAD & Solid Works CAD software * Assist in design, fabrication, and installation of compressor systems, fixtures, tooling, etc. * Ability to create detailed technical reports for internal and/or customer use * Assist in the development of Solidworks PDM database and Solidworks Toolbox * Assist in the development of organizational standards and documentation * Help to create an inteligent parts database in SolidWorks * Assist in the Quality audits of manufacturing and decommissioned modules. Competencies: * Familiarity with 2D and 3D CAD Systems such as AutoCAD, Inventor, and Solidworks * Strong Computer Skills, including proficiency in MS Office applications * Well Developed problem solving & communication * Excellent written and interpersonal skills * Comfortability in sharing thoughts, ideas, and questions How will this internship contribute to the development of his/her knowledge, skills & abilities? * Work in cross functional teams, i.e. electrical and application engineers to learn collaborative design across multiple disciplines. * Due to the expectation that many of the requested tasks will be learning experiences in the areas of automatic controls design, industrial automation, systems and project engineering. All work will be completed under the supervision of experienced team members who will provide appropriate instruction. * Degree Concentrations applicable to the Industrial Segment: Industrial Engineering, Electrical Engineering, Mechanical Engineering, Manufacturing related concentrations. Our Offer to You: * A quality internship experience with impactful assignments & projects * A brand name that is identified across the country as a leading industrial distributor * A competitive hourly wage for the summer (Late May to Early August) * Professional development & growth working for a technology company that provides expert solutions for a wide range industries. At OTC Industrial Technologies, we believe that our employees are our greatest strength. Through investment in our people and growth from within, we believe in providing you with a wide variety of opportunities to accelerate your career potential as you help us drive change to move our business forward. For over 60 years, employing and developing the best-in-class talent has been at the forefront of our success. By coupling our teams' hands-on experience with a wide range of products from top vendors, we provide customers with the best quality products and technical application expertise and services at the lowest possible costs. Working with OTC Industrial Technologies is perfect for purpose driven individuals who are motivated to be part of an exciting transformational company.

SPECIFICATION Mechanical Designer III Department: Utilities & Central Energy (UCE) Reporting Relationship: Lead Designer, UCE COMPANY BACKGROUND KFI Engineers is a recognized industry leader in facility infrastructure design and performance. Since 1996, our culture of collaboration and unique capabilities have allowed us to make a difference in the way infrastructure and processing projects are delivered. Headquartered in St. Paul, MN, with numerous regional offices throughout the United States, and a team of hundreds of professionals, we offer opportunities to continue your career with mentorship programs, career growth support, and continued education. With KFI, we find a way to provide creative solutions to unique projects while providing the same care we would expect if we were the client. For more information about KFI Engineers and our culture, please visit **************** POSITION OVERVIEW & RESPONSIBILITIES The Mechanical Designer III plays a key role in the successful execution of projects, focusing primarily on the production of AutoCAD Plant 3D and Revit drawings. The Mechanical Designer III is responsible for producing quality construction documents and coordinating design work with other engineering disciplines. The successful candidate will also be expected to work within a team environment and collaborate with other project team members. The Mechanical Designer - Level III position is an advanced role focused on taking on significant responsibility in design tasks with an emphasis on independent work. This role involves completing design documents for assigned projects, mentoring junior designers, and contributing to project management. Specific responsibilities will include, but not be limited to, the following: Layout and design mechanical systems for assigned projects General Arrangement Drawings P&ID preparation Construction Documents Creation of 3D-models and piping isometric drawings Perform design work on complex and diverse projects, often requiring multiple technologies Coordinate project design with other disciplines Perform accurate design calculations and measurements Conducts construction observations. Sizes and selects components for mechanical systems. Collaborate with others as a CAD and design resource and provide training when assigned Independently perform assigned layout work and Smart 3D Design tasks Train and mentor junior designers Design piping systems independently Conduct field visits and data collection Estimate project hours for own tasks Manage small projects independently Write specifications for review by Engineer of Record Represent the company at project meetings with approval Contribute to flowsheets and P&ID design Perform equipment sizing and selection Coordinate design with all stakeholders Apply advanced mechanical system design principles (chilled water, steam, etc.) Demonstrate proficiency in at least one specialized area: Plumbing Design, Piping Design, HVAC Design, Fire Protection Design, or General Arrangement Design. Other duties as assigned. QUALIFICATIONS Required An AAS Degree in design/drafting or equivalent work experience. Must be legally authorized to work in the US on a permanent basis without the need for work sponsorship now or in the future. Minimum of 6 years of work experience in mechanical design or related field. Experience in central boiler and/or chiller plants required but will consider one or more of the following: Agribusiness process plants Facility manufacturing Food Manufacturing / Clean Systems Underground tunnel distribution systems Mechanical equipment / skid design. Advanced knowledge of building codes and industry standards. Excellent project management and leadership skills. Advanced proficiency in CAD software, particularly Plant 3D Design (will consider Revit). Excellent communication and collaboration skills. Knowledge of computer technology and specific areas of application, including MS Office. Travel: May include up to 10% domestic travel. Preferred Field experience is desirable. Experience in a consulting and/or construction capacity. Experience in cost estimating and budgeting for mechanical projects Working Conditions Some work locations will feature the tough terrain typical of construction sites. CORE BEHAVIORS Accountable Demonstrates persistence in the achievement of goals. Acts with a sense of urgency. Takes responsibility for own actions. Business Focus Demonstrates agility, adapts well to changes. Works well under pressure. Meets commitments to internal/external customers. Project Execution Plans projects well, managing last-minute rushes and disruptions. Balances Speed and Quality. Looks for improvement in our delivery, tools and processes. Other duties as assigned. Demonstrates Respect for Others Keeps others adequately informed. Exhibits objectivity and openness to others' views. Adapts communication style and method based on audience and situation. Team Player Balances team and individual responsibilities. Shares expertise with others. Inspires respect and trust. Benefits: At KFI, our comprehensive benefit program provides our employees with the resources to support their health, wellness and financial well-being. Full-Time employees have access to: Health, dental and vision insurance coverage Virtual health services Health Savings Account (HSA) & Health Reimbursement Account (HRA) for HDHP enrollees with KFI contributions Flexible Spending Account 401(k) plan Short-term and long-term disability insurance, life and AD&D insurance Employee Assistance Program Paid Time Off to include Earned Sick and Safe Time in accordance with state laws Company Paid Holidays Tuition Reimbursement Bereavement Leave Voluntary benefits offered include life, accident, critical illness coverage Compensation: $40.00-51.00 per hour. The final agreed upon compensation is based on individual qualifications, experience, work location, and education. This position is eligible for an annual bonus. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. This position is not eligible for Visa sponsorship. Equal Opportunity Employer - Veterans and Disabilities

Zachary Piper Solutions is seeking a Secret-cleared Mechanical Design Engineer to support a long-term Air Force program in Cincinnati, Ohio. This role requires strong Siemens NX expertise and the ability to contribute to a high-visibility engineering effort. Responsibilities: * Interpret and modify designs within NX modules, including Modeling, Drafting, and Assemblies * Automate engineering workflows using Perl, Python, or CGI * Utilize foundational knowledge of the Teamcenter environment * Apply GD&T principles to support batch processing, design rule checks, and custom toolbar plug in monitoring * Review and navigate log files within NX Manager Qualifications: * 3+ years of CAD design experience * Proficiency with Siemens NX * Experience with Perl, Python, or CGI scripting * Ability to obtain and maintain a government background check Compensation: * Salary range: $130k-$160k * Full benefits package including Medical, Dental, Vision, 401k, PTO, Sick Leave (as required), and Holidays This job opens for applications on 12/3/2025. Applications for this job will be accepted for at least 30 days from the posting date. Secret Clearance, Mechanical Design Engineer, Mechanical Engineer, CAD Design, Siemens NX, NX Modeling, NX Drafting, NX Assemblies, Teamcenter, GD&T, Geometric Dimensioning and Tolerancing, Engineering Automation, Scripting, Python, Perl, CGI, NX Manager, CAD Workflow Automation, Air Force Program, Defense Engineering, DoD, Aerospace Engineering, CAD Designer, Log File Analysis, Design Rule Checking, Batch Processing, Cincinnati Engineering Jobs, Cleared Engineering Roles

BASIC FUNCTION:The Trainee Engineer in the Rotational Development Program is an entry-level engineering professional participating in a structured program designed to develop broad technical and operational expertise across multiple key functions within the organization.RESPONSIBILITIES:Over the course of the program, the engineer will rotate through four core domains:Process Engineering Gain hands-on experience in optimizing manufacturing processes, improving product quality, and implementing continuous improvement initiatives. Develop process flow sheets for new and existing operation Support equipment design for new plant installations, collaborating with project and mechanical engineering teams to define specifications and layout Analyze and optimize production processes to improve efficiency, quality, and sustainability. Support troubleshooting and root cause analysis for process deviations. Engineering Project Management Participate in the planning, execution, and delivery of capital and technical projects, learning how to manage timelines, budgets, and cross-functional teams. Assist in planning, budgeting, and executing engineering projects and related deliverables. Coordinate with cross-functional teams to ensure timely delivery of project milestones. Track project progress and prepare status reports for stakeholders. Plant Production Operations Work directly with production teams to understand day-to-day operations, troubleshoot issues, and contribute to performance and efficiency improvements. Participate in daily production activities to understand operational workflows. Monitor KPIs such as throughput, yield, and downtime, and propose corrective actions. Ensure compliance with safety, quality, and environmental standards. Early Project Phase Development Collaborate with R&D and innovation teams to support feasibility studies, pilot trials, and the development of new technologies or products. Collaborate with R&D and innovation teams to support feasibility studies and pilot trials. Contribute to the design and scale-up of new processes or products. Document learnings and provide feedback to improve early-phase methodologies. Cross-Rotation Responsibilities Engage in regular feedback sessions with mentors and program coordinators. Demonstrate adaptability and initiative in diverse technical environments. Other duties as assigned. QUALIFICATIONS: Bachelor's Degree in Chemical Engineering, Mechanical Engineering, Industrial Engineering, or a related technical field. Master's degree desired. Prior experience through internships, co-op programs, or academic projects in one or more of the following areas: Process design and optimization Equipment specification or layout planning Manufacturing or plant operations Engineering project coordination or CAPEX initiatives Early-phase product or process development Knowledge and skills: Familiarity with process flow diagrams (PFDs), piping and instrumentation diagrams (P&IDs), and basic equipment design principles. Exposure to engineering software tools (e.g., AutoCAD, Aspen Plus, SolidWorks, MS Project). Strong analytical and problem-solving capabilities. Adaptability and curiosity to learn across diverse technical domains. Effective communication and collaboration in cross-functional teams. Willingness to relocate or travel across sites during the rotation period.Must possess current US employment authorization; sponsorship not available for this position. EOE

Are you an experienced Mechanical Designer looking for a new challenge and an opportunity to further advance your skills and career in a great working environment? Join our fast-growing team supporting leading Aerospace companies! If you are a highly motivated individual, a self-starter with an entrepreneurial spirit and a genuine interest in technology, we have the perfect job for you! The Role The successful candidate will draw upon their experience to aid in the design and analysis of gas turbine engine components. Collaboration and a forward thinking approach are important to ensure we remain the supplier of choice for our customers. You will also be the face of QDSS to your customers. Through listening to customer challenges, and building on your previous experiences, you will find creative approaches that will solve their most difficult engineering problems. Roles & Responsibilities: Develop and/or modify designs related to Aero-engine components by analyzing product specifications, performance requirements, and existing manufacturing capabilities Execute mechanical design projects of gas turbine components on Structures/Rotating parts (Frames, Shaft, Disk, Blisk, seals etc.) Evaluate concepts of new designs/improvements, manufacturing methods, materials or processes and complete required documentation by applying engineering principles and Industry standards, and generating reports, procedures or change proposals Capture design & system requirements from the customer, and incorporate into the component design Support technical substantiation, contribute & present in technical and program reviews Develop components and modules keeping cost, performance, life, and system requirements in mind Design and Analysis of the component using CAE tools (NX, ANSYS Classic, ANSYS workbench) Direct interface with other internal/external engineering functions Apply technical principles, theories, and concepts to solve a wide range of challenging engineering problems Evaluate form, fit, function and life of the components relative to the certified configuration Evaluate non-conformances by reviewing, analyzing design criteria's and acceptability limits, recommend disposition procedures and maximizing producibility Required Skills (Technical Competency): We're excited to talk to you if your qualifications meet the following criteria: 1+ years of experience in the mechanical design of Gas-turbine or Turbo-machinery components Minimum BS/B.Tech in Mechanical or Aerospace engineering from an accredited university Experience with NX and ANSYS (Classic or workbench) or other similar tools Ability to easily interpret technical drawings with understanding of GD&T Demonstrated ability to meet deadlines, work under time constraints, maintain composure and handle multiple tasks simultaneously Ability to interact with employees/managers at all levels with strong oral and written communication skills Project Management experience is desired, but not required Strong interpersonal skills and ability to work in a team environment Like to work in a fast paced, creative environment Enjoy people and dynamic teams with diverse experiences. We have fun together! US Citizen required & willing to get clearance in near term Physical Requirements & Work Environment: Mostly Office Environments, Occasional Shop Floor involvement. Substantial amounts of telephone and computer work. Heavily Regulated Industries with strict adherence to procedures. Flexibility to meet business deadlines by staying late or arriving early. Typical 8 hour days plus lunch / 40 hour weeks / core (required) hours are 9AM to 4PM Ability to use personal transportation to visit customer locations. Due to the nature of the work, all candidates must be a U.S. Citizen. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Full compensation package is based on candidate experience and certifications Pay Ranges$58,000-$65,000 USD At Quest Defense Systems and Solutions, we don't just build technology - we engineer the future. From next-generation aerospace solutions to cutting-edge defense systems, we tackle the toughest, mission-critical challenges that keep people safe and push the boundaries of innovation. This is where problem-solvers, innovators, and visionary thinkers come together to shape the future. With over 25 years of aerospace and defense engineering expertise, our commitment to delivering high-quality, transformative solutions sets us apart - not just as an industry leader, but as a driving force for impactful change. Together, we're not just leading the industry - we're revolutionizing it. Quest Defense provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Build your Career with an Industry Leader Headquartered in Cincinnati, LSI Industries (NASDAQ: LYTS) specializes in the creation of advanced lighting, graphics, and display solutions across strategic vertical markets. The company's American-made products, which include lighting, print graphics, digital graphics, refrigerated and custom displays, aim to help businesses stand out in a competitive market. With a workforce of approximately 2,000 employees and 20 facilities throughout North America, LSI provides top-quality solutions for its clients. LSI's management team is focused on continued profitable growth. We are looking for a Manufacturing Design Engineer to support our team at our corporate location in Cincinnati, OH. SUMMARY: Provide manufacturing influence and expertise to the Design Engineering team to ensure that manufacturability, repeatability, process control and quality are considered and met at every stage of the production development process. Provide cross functional coordination between Operations, Engineering and the Quality departments to facilitate seamless transition of new product designs into the manufacturing environment. ESSENTIAL DUTIES AND RESPONSIBILITIES: Work with design engineers on implementing new product designs into production. This includes identifying production capabilities/limitations, conducting engineering builds, coordinating pilots with Operations, and assisting in preparing necessary documentation that helps successfully implement product to shop floor. Review bills of material, assembly drawings, routings, and other production support documentation to maintain accuracy and work closely with Product Support Teams implementing changes and proposed improvements. Work with cross-functional teams in the planning and designing of new products to ensure their manufacturability and apply DFM methods and analysis. Assist in the design and specification of assembly fixtures, jigs, tools and testers as needed to achieve manufacturing goals. Drive continuous improvement projects start to finish updating all necessary Engineering and Manufacturing documentation, processes, procedures, and equipment as needed to support the continuous improvement. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE: Bachelor's degree (B. A.) from four-year college or university; and one to two years related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. REASONING ABILITY Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. OTHER SKILLS AND ABILITIES Use computer assisted drafting system (CAD) equipment and software. COMMENTS Employee may upon occasion be required to go to a job site to record data or make observations. Benefits: 401(k) Health insurance Dental insurance Vision insurance Paid time off EEOC: LSI is committed to a diverse and inclusive workplace. LSI is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.

As an Advanced Mechanical Design Engineer here at Honeywell, you will be a key contributor to the design and development of cutting-edge mechanical solutions. Your strong knowledge of mechanical design principles and methodologies will ensure that the products developed under your leadership meet the highest standards of quality and reliability. Your proficiency in CAD software and other design tools will enable you to effectively oversee the design process and ensure the delivery of innovative and high-performance mechanical solutions. You will report directly to our Mechanical Engineering Manager and you'll work out of our Mason, OH location on a hybrid work schedule. Note: New Hires are required to report onsite M-F for the first 90 days. In this role, you will impact the development of Loop Sorter MHE system designs that will drive the success of our Industrial Automation business. You will collaborate with cross-functional teams to define mechanical requirements and specifications, design and develop loop sorter systems, and perform mechanical analysis and simulations to ensure product performance and reliability. KEY RESPONSIBILITIES * Lead and drive the mechanical design process of loop sorter applications, from concept to project turnover * Collaborate with cross-functional teams to define requirements and specifications of loop sorter applications * Perform mechanical analysis and simulations to ensure project performance and reliability * Provide technical guidance and support to junior engineers on loop sorter applications * Stay updated with the latest industry trends and technologies Due to compliance with U.S. export control laws and regulations, candidate must be a U.S. Person, which is defined as, a U.S. citizen, a U.S. permanent resident, or have protected status in the U.S. under asylum or refugee status or have the ability to obtain an export authorization. BENEFITS OF WORKING FOR HONEYWELL * Benefits - Medical, Vision, Dental, Mental Health * Paid Vacation * 401k Plan/Retirement Benefits (as per regional policy) * Career Growth * Professional Development In addition to a competitive salary, leading-edge work, and developing solutions side-by-side with dedicated experts in their fields, Honeywell employees are eligible for a comprehensive benefits package. This package includes employer subsidized Medical, Dental, Vision, and Life Insurance; Short-Term and Long-Term Disability; 401(k) match, Flexible Spending Accounts, Health Savings Accounts, EAP, and Educational Assistance; Parental Leave, Paid Time Off (for vacation, personal business, sick time, and parental leave), and 12 Paid Holidays. For more information visit: ******************************* The application period for the job is estimated to be 40 days from the job posting date; however, this may be shortened or extended depending on business needs and the availability of qualified candidates. Job Posting Date: 10/31/25. YOU MUST HAVE * Bachelor's degree from an accredited institution in a technical discipline such as the sciences, technology, engineering or mathematics * 6+ years of experience in mechanical design * Experience in Loop Sorter, cross belt (cross-belt) sorter, or tilt tray sorter WE VALUE * Bachelor's degree in Mechanical Engineering or related field * Proven track record of successful mechanical design projects for conveyor MHE * Ability to lead and mentor junior engineers * Strong understanding of industry standards and best practices * Experience with product testing and validation * Knowledge of materials and manufacturing processes ABOUT HONEYWELL Honeywell International Inc. (Nasdaq: HON) invents and commercializes technologies that address some of the world's most critical challenges around energy, safety, security, air travel, productivity, and global urbanization. We are a leading software-industrial company committed to introducing state of the art technology solutions to improve efficiency, productivity, sustainability, and safety in high growth businesses in broad-based, attractive industrial end markets. Our products and solutions enable a safer, more comfortable, and more productive world, enhancing the quality of life of people around the globe. Learn more about Honeywell: ******************************* THE BUSINESS UNIT Honeywell Industrial Automation enables process industry operations, creates world-class sensor technologies, automates supply chains, makes warehouses smarter, and improves worker safety. This combination builds on our core strengths in controls and automation technologies which in turn allows us to deliver better commercial outcomes for our customers. We enable customers to enhance the safety, sustainability, resiliency and productivity of their people, plants and assets.

As an Advanced Mechanical Design Engineer here at Honeywell, you will be a key contributor to the design and development of cutting-edge mechanical solutions. Your strong knowledge of mechanical design principles and methodologies will ensure that the products developed under your leadership meet the highest standards of quality and reliability. Your proficiency in CAD software and other design tools will enable you to effectively oversee the design process and ensure the delivery of innovative and high-performance mechanical solutions. You will report directly to our Mechanical Engineering Manager and you'll work out of our Mason, OH location on a hybrid work schedule. Note: New Hires are required to report onsite M-F for the first 90 days. In this role, you will impact the development of Loop Sorter MHE system designs that will drive the success of our Industrial Automation business. You will collaborate with cross-functional teams to define mechanical requirements and specifications, design and develop loop sorter systems, and perform mechanical analysis and simulations to ensure product performance and reliability. YOU MUST HAVE Bachelor's degree from an accredited institution in a technical discipline such as the sciences, technology, engineering or mathematics 6+ years of experience in mechanical design Experience in Loop Sorter, cross belt (cross-belt) sorter, or tilt tray sorter WE VALUE Bachelor's degree in Mechanical Engineering or related field Proven track record of successful mechanical design projects for conveyor MHE Ability to lead and mentor junior engineers Strong understanding of industry standards and best practices Experience with product testing and validation Knowledge of materials and manufacturing processes ABOUT HONEYWELL Honeywell International Inc. (Nasdaq: HON) invents and commercializes technologies that address some of the world's most critical challenges around energy, safety, security, air travel, productivity, and global urbanization. We are a leading software-industrial company committed to introducing state of the art technology solutions to improve efficiency, productivity, sustainability, and safety in high growth businesses in broad-based, attractive industrial end markets. Our products and solutions enable a safer, more comfortable, and more productive world, enhancing the quality of life of people around the globe. Learn more about Honeywell: ******************************* THE BUSINESS UNIT Honeywell Industrial Automation enables process industry operations, creates world-class sensor technologies, automates supply chains, makes warehouses smarter, and improves worker safety. This combination builds on our core strengths in controls and automation technologies which in turn allows us to deliver better commercial outcomes for our customers. We enable customers to enhance the safety, sustainability, resiliency and productivity of their people, plants and assets. KEY RESPONSIBILITIES Lead and drive the mechanical design process of loop sorter applications, from concept to project turnover Collaborate with cross-functional teams to define requirements and specifications of loop sorter applications Perform mechanical analysis and simulations to ensure project performance and reliability Provide technical guidance and support to junior engineers on loop sorter applications Stay updated with the latest industry trends and technologies Due to compliance with U.S. export control laws and regulations, candidate must be a U.S. Person, which is defined as, a U.S. citizen, a U.S. permanent resident, or have protected status in the U.S. under asylum or refugee status or have the ability to obtain an export authorization. BENEFITS OF WORKING FOR HONEYWELL • Benefits - Medical, Vision, Dental, Mental Health • Paid Vacation • 401k Plan/Retirement Benefits (as per regional policy) • Career Growth • Professional Development In addition to a competitive salary, leading-edge work, and developing solutions side-by-side with dedicated experts in their fields, Honeywell employees are eligible for a comprehensive benefits package. This package includes employer subsidized Medical, Dental, Vision, and Life Insurance; Short-Term and Long-Term Disability; 401(k) match, Flexible Spending Accounts, Health Savings Accounts, EAP, and Educational Assistance; Parental Leave, Paid Time Off (for vacation, personal business, sick time, and parental leave), and 12 Paid Holidays. For more information visit: ******************************* The application period for the job is estimated to be 40 days from the job posting date; however, this may be shortened or extended depending on business needs and the availability of qualified candidates. Job Posting Date: 10/31/25.

This person will work with staff engineers to update the design of existing products. In addition, job duties will consist of working on various designs and CAD services projects in a variety of industries. Projects include conceptual design, layouts, form/fit and function analysis, GD&T, parametric modeling, detailing and engineering change notices. Qualifications * Experience in mechanical design * Experience with SolidWorks, Inventor, NX, Solid Edge, CREO and/or AutoCAD * GD&T experience is helpful. TES offers an extremely competitive compensation package that includes; major medical, vision, dental, life insurance, long-term disability insurance, vacation, holiday and 401K with company match. Interested? send your resume and cover letter to ****************** Thinkpath Engineering Services (TES) has been a global leader in Engineering and Design Services since 1977. Headquartered in Miamisburg, OH, TES has additional offices in Columbus, IN; Tampa, FL; Marietta, GA; and Toronto, ON. TES provides the following engineering services: * Engineering Design and Drafting Services: Conceptual design, analysis, layout, form/fit and function analysis, drafting (including Geometric Dimensioning and Tolerancing), Technical Data Packages (TDP) development as well as reverse engineering services * CAD Services: Includes parametric modeling, detailing, incorporation of ECNs into existing designs, BOM development, and conversion services between various CAD packages. * Technical Documentation: TES technical documentation team has the ability to author documents, incorporate engineering changes into existing documents, create illustrations and produce animations. * Contract and Direct Placement: Technical placement of engineers, designers, drafters, as well as additional technical professionals in various industries.

Are you ready to apply cutting-edge technologies to solve real world problems? You might just be a perfect fit for the CDO team. Since 1995, CDO Technologies has delivered the best solutions for unique business problems in the commercial and federal sectors ranging from Asset Management to IT Services. Primary Duties/Responsibilities: Work with SKM Electrical system modeling software for Arc Flash Analysis, short circuit studies, protective device coordination, power flow studies, etc. Obtain real world experience in Electrical Power Engineering Hands-on field work - investigating existing conditions and gathering information at project locations Work with project engineers developing designs for power distribution and facility electrical systems, including emergency power, telecom / data, fire / security, and lighting. Co-op will become familiar with system protection applications, short circuit analysis, medium/high voltage systems and distribution components. Projects will generally be for healthcare or institutional facilities. In addition to participating in project design work, expect to use Autocad, Revit, research and document completed projects, attend meetings, and assist in developing presentations. This position is 50/50 office work and project site work. Overnight travel for this co-op position would be unusual (but not improbable). CDO is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Advanced Drainage Systems is a leading manufacturer of stormwater and onsite septic wastewater solutions, committed to sustainability and innovation. With a vast manufacturing and distribution network, we deliver high-quality products across multiple industries while recycling over half a billion pounds of plastic annually. At ADS, we foster a culture where diverse perspectives drive better ideas, ensuring every employee feels valued, heard, and empowered to make an impact. Responsibilities Engineering interns will aid manufacturing and project engineering with rebuilding manufacturing equipment. Candidates will be given opportunities in design work and project management. Candidates will be challenged, supported, and trained by an experienced team to be successful in this position. The position is available for up to 40 hours per week and will accommodate school schedules. Primary Job Responsibilities: The responsibilities of this position include, but are not limited to: * Assisting the Machine Tooling Operations team with project planning through various rebuild stages * Work on 3D CAD models and 2D drawings for various ADS equipment based on guidance from engineering team * Interact professionally with cross functional teams * Comfortable with complex problem solving and rapidly changing priorities * Other duties as requested, directed, or assigned Job Skills: This position should possess the following skills/knowledge: * MS Office Suite (Excel, PowerPoint, Project, Word, Outlook, etc.) * Strong communication skills both written and verbal Educational Requirements: Candidates must be enrolled in a university program pursuing a Bachelor's Degree or higher in Mechanical Engineering or be a recent Engineering graduate. Preferred Experience: * Strong project management skills * Tooling and design experience * Experience in 3D modeling (Inventor is preferred) and 2D drawing generations * Proficient in the use of Auto CAD 2D Physical Requirements: * Ability to lift up to 50lbs. * Work safely in and around manufacturing plant equipment Why Join ADS? Growth Opportunities & Global Presence: With a global network of approximately 70 manufacturing plants and 40 distribution centers, ADS offers extensive opportunities for career growth and development in various locations around the world. Inclusive and Creative Work Culture: ADS fosters a culture of passion, innovation, and continuous improvement, empowering employees to shape industry-leading solutions. We value diverse perspectives, recognizing that they drive better ideas, processes, and performance. Our workplace is built on respect, inclusivity, and shared responsibility, ensuring every team member feels valued and contributes to our collective success. Innovative & Sustainability Focused: Advanced Drainage Systems is one of the largest plastic recyclers in North America, ensuring over half a billion pounds of plastic is kept out of landfills every year. Learn More: ******************************** EEO Statement Advanced Drainage Systems is proud to be an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Advanced Drainage Systems is a leading manufacturer of stormwater and onsite septic wastewater solutions, committed to sustainability and innovation. With a vast manufacturing and distribution network, we deliver high-quality products across multiple industries while recycling over half a billion pounds of plastic annually. At ADS, we foster a culture where diverse perspectives drive better ideas, ensuring every employee feels valued, heard, and empowered to make an impact. Responsibilities Engineering interns will aid manufacturing and project engineering with rebuilding manufacturing equipment. Candidates will be given opportunities in design work and project management. Candidates will be challenged, supported, and trained by an experienced team to be successful in this position. The position is available for up to 40 hours per week and will accommodate school schedules. Primary Job Responsibilities: The responsibilities of this position include, but are not limited to: Assisting the Machine Tooling Operations team with project planning through various rebuild stages Work on 3D CAD models and 2D drawings for various ADS equipment based on guidance from engineering team Interact professionally with cross functional teams Comfortable with complex problem solving and rapidly changing priorities Other duties as requested, directed, or assigned Job Skills: This position should possess the following skills/knowledge: MS Office Suite (Excel, PowerPoint, Project, Word, Outlook, etc.) Strong communication skills both written and verbal Educational Requirements: Candidates must be enrolled in a university program pursuing a Bachelor's Degree or higher in Mechanical Engineering or be a recent Engineering graduate. Preferred Experience: Strong project management skills Tooling and design experience Experience in 3D modeling (Inventor is preferred) and 2D drawing generations Proficient in the use of Auto CAD 2D Physical Requirements: Ability to lift up to 50lbs. Work safely in and around manufacturing plant equipment Why Join ADS? Growth Opportunities & Global Presence: With a global network of approximately 70 manufacturing plants and 40 distribution centers, ADS offers extensive opportunities for career growth and development in various locations around the world. Inclusive and Creative Work Culture: ADS fosters a culture of passion, innovation, and continuous improvement, empowering employees to shape industry-leading solutions. We value diverse perspectives, recognizing that they drive better ideas, processes, and performance. Our workplace is built on respect, inclusivity, and shared responsibility, ensuring every team member feels valued and contributes to our collective success. Innovative & Sustainability Focused: Advanced Drainage Systems is one of the largest plastic recyclers in North America, ensuring over half a billion pounds of plastic is kept out of landfills every year. Learn More: ******************************** EEO Statement Advanced Drainage Systems is proud to be an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Element has an opportunity for a Engineer Intern (Medical Devices) position at our Fairfield, OH location. Responsibilities Prepare material specimens for testing Perform tests as directed by customer specifications Operate under the supervision of a more senior test technician and/or a Department Manager Gather and record test data Construct and maintain various test fixtures and other laboratory equipment Skills / Qualifications Preferred if the candidate is currently pursuing a Bachelors degree in a related field. Possess the ability to work alone periodically throughout the work day with supervision Understand what must be completed each work day and takes the initiative to complete those tasks properly and in timely manner Ability to read and understand customer specifications and perform the testing required Able to develop a proven ability to set up and perform a variety of tests according to customer specifications under the supervision and technical input of Senior/Principal Engineers. Physical Demands: Frequency of required physical force: Minimum (moderate). Lifting requirements: lifting 50 lbs. on occasion Ability to stand on feet for long periods of time Ability to lift 50+lbs periodically #LI-TK1 Company Overview Element is one of the fastest growing testing, inspection and certification businesses in the world. Globally we have more than 9,000 brilliant minds operating from 270 sites across 30 countries. Together we share an ambitious purpose to ‘Make tomorrow safer than today'. When failure in use is not an option, we help customers make certain that their products, materials, processes and services are safe, compliant and fit for purpose. From early R&D, through complex regulatory approvals and into production, our global laboratory network of scientists, engineers, and technologists support customers to achieve assurance over product quality, sustainable outcomes, and market access. While we are proud of our global reach, working at Element feels like being part of a smaller company. We empower you to take charge of your career, and reward excellence and integrity with growth and development. Industries across the world depend on our care, attention to detail and the absolute accuracy of our work. The role we have to play in creating a safer world is much bigger than our organization. Diversity Statement At Element, we always take pride in putting our people first. We are an equal opportunity employer that recognizes diversity and inclusion as fundamental to our Vision of becoming “the world's most trusted testing partner”. All suitably qualified candidates will receive consideration for employment on the basis of objective work related criteria and without regard for the following: age, disability, ethnic origin, gender, marital status, race, religion, responsibility of dependents, sexual orientation, or gender identity or other characteristics in accordance with the applicable governing laws or other characteristics in accordance with the applicable governing laws.

Creating Peace of Mind by Pioneering Safety and Security At Allegion, we help keep the people you know and love safe and secure where they live, work and visit. With more than 30 brands, 12,000+ employees globally and products sold in 130 countries, we specialize in security around the doorway and beyond. Additionally, in 2024 we were awarded the Gallup Exceptional Workplace Award, which recognizes the most engaged workplace cultures in the world. Senior Mechanical Engineer - Blue Ash, OH-(Onsite) Allegion is looking for a passionate Senior Mechanical Engineer to work as part of a highly engaged small team within a global organization of 12,000+ employees, representing 30+ brands (including Schlage, Von Duprin, LCN and Steelcraft) focused on safety, security and access management. You'll work on solutions that will enable seamless access and help keep you and your loved ones safe and secure where they work, live and thrive. What You Will Do: * Define mechanical system requirements and specifications to meet customer, marketing, and internal stakeholder needs. * Utilize engineering tools (FMEA, Root Cause Analysis, GD&T, Tolerance Stack Analysis & DFM/DFA) to ensure that requirement risks are evaluated and mitigated early in the design process. * Ensure designs meet system requirements through proper verification methods. * Develop required design documentation, 3D models/drawings, and instructions for manufacturing and product test requirements. Experience with Pro-E/Creo is a plus. * Work with all engineering disciplines in a team environment with good understanding of cross functional design processes (high focus on interactions with Manufacturing Engineering, Operations, and Engineering functions at other brands) * Define design trade-offs as necessary to ensure the highest level of product performance and quality when considering product cost, manufacturability, and available technologies. * Coordinate development timelines and track activities to meet delivery and cost commitments. * Responsibilities could include technical leadership of cross-functional teams, leading design reviews and supplier reviews, developing technical documentation, product change management, and/or process development/enhancement. * Provide day-to-day direction and oversight for other employees. What You'll Need to Succeed: * BS in Mechanical Engineering. * 7+ years of experience in the design, development, implementation, and integration of mechanical systems. * Proven experience in moderate to complex product and/or program management. * An upbeat, positive attitude and have a passion for technology and willingness to explore and adopt emerging technologies for practical business purposes. * Ability to quickly understand new business domains and be creative and thoughtful about applying technology to enable business growth, consumer satisfaction, and/or process improvements. * Ability to quickly build proof-of-concept solutions that are forward looking to how they could be implemented on a larger scale. * Self-motivated mindset with strong engineering project management skills. * Ability to communicate well verbally and in writing, with various team members in roles that are both technical and non-technical, particularly to give direction to other team members or present business value of various initiatives to leadership. * A proactive work approach to coordinate efforts with employees at all levels including internal business partners, other technology teams, external suppliers/consultants, service providers, etc. * Experience in product design from concept to production and have experience utilizing cross functional processes such as engineering change control. * Demonstrated experience leading and executing mechanical product design under little or no supervision. * Ability leading teams that may be globally co-located. * Have Experience delivering technical solutions for projects leveraging agile project management methodologies. * Experience using an integrated development environment or application lifecycle management tools such as Visual Studio or DevOps * Proficiency with engineering tools including FMEA, Root Cause Analysis, GD&T, Tolerance Stack Analysis & DFM/DFA. * Experience with manufacturing processes such as roll forming, press break, sheet metal stampings, machining, welding, and rapid prototyping is a plus. * Experience with Sheet Metal Design, Creo, Solidworks, Windchill, Finite Element Analysis, Industry Standards/Validation, Value Analysis Value Engineering, Designing for Harsh Environment Conditions is a plus. Allegion is a Great Place to Grow your Career if: * You're seeking a rewarding opportunity that allows you to truly help others. With thousands of employees and customers around the world, there's plenty of room to make an impact. As our values state, "this is your business, run with it". * You're looking for a company that will invest in your professional development. As we grow, we want you to grow with us. * You want a culture that promotes work-life balance. Our employees enjoy generous paid time off, because at Allegion we recognize that you have a full life outside of work! What You'll Get from Us: * Health, dental and vision insurance coverage, helping you "be safe, be healthy" * Unlimited Paid Time Off * Hybrid work arrangement * A commitment to your future with a 401K plan, which currently offers a 6% company match and no vesting period * Tuition Reimbursement * Employee Discounts through Perks at Work * Community involvement and opportunities to give back so you can "serve others, not yourself" * Opportunities to leverage your unique strengths through CliftonStrengths assessment & coaching Apply Today! Join our team of experts today and help us make tomorrow's world a safer place! Not sure if your experience perfectly aligns with the role? Studies have shown that some people are less likely to apply to jobs unless they meet every single qualification and every single preferred qualification of a job posting. At Allegion, we are dedicated to building a diverse, inclusive, and authentic workplace. So, if you're excited about this role but your past experience doesn't align perfectly with every item in the job description, we encourage you to apply anyway. You may be just the right candidate for this role. #LI-TB1 #LI-Onsite We Celebrate Who We Are! Allegion is committed to building and maintaining a diverse and inclusive workplace. Together, we embrace all differences and similarities among colleagues, as well as the differences and similarities within the relationships that we foster with customers, suppliers and the communities where we live and work. Whatever your background, experience, race, color, national origin, religion, age, gender, gender identity, disability status, sexual orientation, protected veteran status, or any other characteristic protected by law, we will make sure that you have every opportunity to impress us in your application and the opportunity to give your best at work, not because we're required to, but because it's the right thing to do. We are also committed to providing accommodations for persons with disabilities. If for any reason you cannot apply through our career site and require an accommodation or assistance, please contact our Talent Acquisition Team. Allegion plc, 2023 | Block D, Iveagh Court, Harcourt Road, Dublin 2, Co. Dublin, Ireland REGISTERED IN IRELAND WITH LIMITED LIABILITY REGISTERED NUMBER 527370 Allegion is an equal opportunity and affirmative action employer Privacy Policy

Job Description Title: Senior Mechanical Design Engineer COMPANY PROFILE: Our client is a full-service architecture and engineering firm specializing in healthcare and public sector projects. The firm integrates thoughtful and inclusive principles into every design and leverages advanced technology, including 3-D and laser scanning, Building Information Modeling (BIM), thermal imaging, and virtual reality, to deliver high-quality results. The organization is mission-driven, using exceptional design skills to improve clinical outcomes for patients and support the well-being of healthcare professionals. POSITION PROFILE: Our client is seeking a Senior Mechanical Design Engineer to join the growing Cincinnati team. This role requires technical expertise in mechanical systems, strong leadership skills, and the ability to manage multiple projects simultaneously. The Senior Mechanical Engineer will supervise mechanical engineering staff, oversee design work from concept through completion, and serve as the primary client interface for mechanical engineering services. POSITION RESPONSIBILITIES: Lead mechanical engineering scope for design projects from concept through completion, ensuring quality, budget, and timeline requirements are met Oversee HVAC system design, energy modeling, and technical specifications for a variety of projects Prepare and perform quality control on design documents, including drawings, specifications, and calculations Conduct field surveys, review shop drawings, and implement BIM plans Review designs for code compliance, regulatory requirements, and internal standards Assign work to mechanical engineering staff, set expectations, and provide feedback Develop labor estimates and enter forecasts in project management systems Mentor and supervise mechanical engineering team members, providing guidance, check-ins, and annual performance reviews Act as primary client interface for mechanical engineering, fostering strong, long-term client relationships Identify and implement best practices to enhance efficiency, innovation, and technical quality Represent the firm in client interviews, industry presentations, and professional associations POSITION QUALIFICATIONS: Minimum 10 years of experience in mechanical engineering Bachelor's or Master's Degree in Engineering from an accredited program Licensed Professional Engineer (PE) Experience in healthcare projects preferred Experience preparing contract documents (drawings and specifications) Experience coordinating design across multi-discipline projects Experience leading engineering teams and delivering projects of varying scale and complexity Strong understanding of building codes and construction practices ADDITIONAL INFORMATION: Competitive compensation with benefits including medical, dental, disability, and life insurance, 401k with match, year-end performance bonus, paid parental leave, and generous PTO Opportunities for professional development, training, and career growth, including support for certifications and licensure Work performed primarily in an office environment, with travel to client meetings and project sites as needed Physical requirements include standing, walking, sitting, using hands and arms for typing and handling objects, operating a vehicle, and lifting up to 20 lbs EOE STATEMENT: Emissary Recruiting Solutions and its Clients/Affiliates are equal opportunity employers who zealously support and advance diversity in the workplace.