Numerical control operator jobs in Brooklyn Park, MN

The CNC Turning Supervisor is a hands-on leader responsible for overseeing daily operations within the CNC Turning Department. This role ensures parts are produced safely, efficiently, and to high quality standards while providing technical guidance and leadership to machinists. The supervisor will perform setups, troubleshoot issues, support programming needs, and drive continuous improvement across the department. The ideal candidate has strong CNC turning experience, including advanced setups, live tooling, multi-axis turning, and the ability to balance production priorities with effective team leadership. Key Responsibilities Leadership & Oversight Supervise daily operations of the CNC Turning Department to ensure schedule adherence and consistent product quality. Lead, train, and mentor machinists in setup, programming support, and inspection techniques. Maintain accountability for quality, efficiency, attendance, and workplace conduct. Coordinate workflow, prioritize jobs, and allocate resources to meet production demands. Collaborate with Production, Quality, and Programming teams to align daily priorities. Maintain a clean, organized, and safe work environment. Technical Execution Perform CNC turning setups, including live tooling and Y-axis operations. Set up and operate CNC turning machines with twin-spindle, live tooling, or multi-turret capabilities. Assist with creating, editing, or optimizing CNC programs (MDI or CAM) to improve accuracy and efficiency. Conduct first-piece inspections and verify dimensional accuracy to ensure quality compliance. Troubleshoot tooling, machine, and program-related issues and support machinists in resolving problems. Accurately interpret complex blueprints and apply GD&T requirements. Continuous Improvement Monitor departmental performance and identify opportunities to increase efficiency and reduce process variation. Help standardize setup procedures, documentation, and best practices for consistency and repeatability. Support improvements in tooling, fixturing, and programming standards. Participate in Lean initiatives and maintain documentation for processes and setups. Ensure ongoing adherence to all safety and quality standards. Qualifications Required 5+ years of CNC turning experience, including setups and operation. Proficiency in reading blueprints and applying GD&T. Strong machining troubleshooting skills (tooling, programs, machines). Effective leadership, communication, and team-building abilities. Excellent attention to detail and strong organizational skills. Ability to thrive in a fast-paced, team-oriented environment. Commitment to quality, safety, and continuous improvement. Preferred Experience with twin-spindle, live tooling, or multi-turret turning centers. CAM programming experience (Mastercam, GibbsCAM, or similar). Prior experience in a lead or supervisory role. Experience with advanced CNC machine brands (e.g., Doosan, DMG Mori, etc.).

We are seeking a motivated Mold Maker to join the team at our brand-new product development facility in Plymouth, MN. This role will provide an opportunity to gain experience in all aspects of mold building and will provide opportunities for future growth, training, and development. The primary responsibilities of this role are to build injection molds and related tools/components which are manufactured and maintained to a high degree of quality. This is an intermediate level role and will work closely with and under direction of other senior Mold Makers. The Mold Maker ensures ProMed's brand, philosophy, systems, policies, and procedures are properly implemented and observed. Schedule: Flexible day shift hours. Shift typically starts between 4:00 a.m. - 8:00 a.m. Get out early on Fridays! ESSENTIAL DUTIES & RESPONSIBILITIES Position duties and responsibilities include, but are not limited to the following: Fabricate precision injection molds from CAD models and drawings that meet dimensional specifications and quality standards, ensuring manufacturing processes achieve required tolerances Collaborate with senior mold makers to gain further experience with all aspects of mold building, maintenance/repairs, and injection molding Independently set up, program, and operate multiple types of CNC machining equipment including 3 and 5-axis mills, sinker EDM, and grinders with minimal supervision, producing precise medical injection molds that meet tight tolerances Modifies or repairs existing molds, fixtures, etc. in accordance with engineering drawings, solid models, or verbal instructions. Conduct comprehensive quality inspections of in-process and finished mold components to ensure conformance with engineering specifications and customer requirements Maintain machining equipment with routine preventative maintenance to ensure optimal performance and minimize production downtime Contribute to individual and team continuous improvement activities Observe and adhere to all safety expectations, procedures, and regulations Ensure tool room is maintained in a clean and orderly manner daily Other Duties as Needed: Any other duties and tasks as deemed necessary and appropriate QUALIFICATION, EDUCATION & EXPERIENCE To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Required: 2 years technical or trade school degree with an emphasis on tool making or equivalent experience A minimum of 5 years of experience as a Mold Maker building injection molds Intermediate understanding of programming (CAM) software Must have a high degree of skill, attention to detail, and a passion for precision Machine setup experience with 3 or 5-axis mills, sinker EDM, and grinders Capable with general shop measuring equipment, micrometers, calipers, gauge pins, etc. Humble personality who is willing to learn from the team while bringing new ideas in a professional manner for the betterment of the organization General curiosity and drive for building things and understanding how they work Meets expectations of regular, reliable attendance Ability to work independently with minimal supervision Professional, courteous, and friendly personality Preferred: Experience with Mastercam or CAM-TOOL Silicone mold building experience WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the principal roles and responsibilities of this job. Exposure to heated/air conditioned, ventilated facilities with florescent lighting; Exposure to building where a variety of chemical substances are used for cleaning, and/or operation of equipment; The noise level in the work environment is typical of a tool shop; Duties are performed indoors; Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. PHYSICAL, SENSORY, COGNITIVE & NEUROLOGICAL DEMANDS While performing the duties of this job: Ability to lift 50 pounds; Ability to operate heavy machinery; The employee may be required to stoop, bend, squat, kneel, reach, stand, walk, lift, pull, push, grasp, talk, hear, see and use repetitive motions; Specific vision abilities required include close vision such as to read handwritten or typed material and the ability to adjust focus; The position requires the individual to meet multiple demands from several people and interact with internal and external people; Employee moves about the building and be able to maneuver in tight spaces between desks, etc.; Employee may have duties involving walking on even or uneven surfaces; Employee occasionally to frequently use a whiteboard, which can require grasping whiteboard pens, reaching at, below, or above shoulder height and may require trunk or neck rotation to look back; Employee may use computers, overhead projectors, TV, VCR, and other work-related equipment, which may require an approximately 25+ pound force to push or pull equipment; It is necessary to grasp and manipulate pens, markers, scissors, staplers, etc. occasionally to frequently. Employee must see and hear on a continuous basis as well as speak frequently; Position varies from standing, sitting, walking, etc. On some occasions it may be necessary to move quickly, run, etc. over smooth or uneven surfaces. ProMed offers a generous benefits package including: 401k with company match Profit Sharing program Medical Insurance Health Savings Account/Flexible Spending Account Dental Insurance Vision Insurance Life Insurance Short, and Long-Term Disability Insurance Critical Illness, Accident, and Identity Theft Protection Pet Insurance ProMed does not discriminate in employment opportunities or practices on the basis of race, color, creed, religion, national origin, ancestry, age, sex, marital status, order of protection, disability, military status, sexual orientation, gender identity, pregnancy, public assistance, family status, unfavorable discharge from military service, genetic information or other segmenting factor protected by law, or local human rights commission activity.

Time to get out of the shop?! Excellent career opportunity to utilize your machinist background! We are seeking a machinist with excellent tooling knowledge to assist our Outside Sales & Applications Engineering teams. Why this job? $29.50 - $32.00/hour starting hourly rate - plus incentives Excellent Medical, Dental, and Vision Insurance Day 1 of Employment 401k with Match Generous Paid Time Off Ongoing technical training provided 8 AM - 5 PM - Monday - Friday (IN OFFICE - NO HYBRID) Responsibilities Primary Internal Support - Serve as the main internal resource for the Tooling Outside Sales team, providing timely assistance and information as needed. Quoting & Order Entry - Prepare accurate quotes and process orders for tooling and other product lines as required. Customer Service - Deliver knowledgeable, professional, and courteous service to customers. Duties may include entering orders into the system, verifying pricing and lead times, sending order confirmations, and providing updates on overdue or pending orders. EOS Processing Support - Assist with EOS processing for quoted and ordered tooling items. Phone & Sales Support - Handle overflow tooling calls and provide phone support for the Inside Sales team during vacations, meetings, and peak call times. Interdepartmental Coordination - Work with the Accounting department to resolve cost and pricing discrepancies and assist with addressing open orders that require billing or closure. Meetings & Supplier Interaction - Participate in Tooling Sales meetings and occasionally meet with suppliers to stay informed on product updates, new offerings, and other relevant information. Additional Responsibilities - Perform other duties and tasks as assigned to support the overall function of the department. Requirements Knowledge of machining materials and processes generally gained through a 2-year technical degree or certificate in Machine Technology, or a minimum of 3 years of hands-on experience in a machine shop environment, including working with tooling and accessories, setting up jobs, and running CNC machines. Ability to interact professionally and tactfully with internal and external customers, as well as vendors. Ability to educate customers and offer additional tooling solutions and alternatives. Ability to organize and follow-up on multiple projects. Ability to operate and enter information into a computer. Why our company? Productivity, Inc. is known for its impressive customer service and integrity within our industry. We achieve that reputation by hiring the right people, treating them with respect, providing excellent customer service, and acting with integrity. We are a stable, established company, and we've been around for a long time! Over the years, we have continued to grow, learn, evolve, and expand, providing growth opportunities to our long-term employees. We are committed to providing Equal Employment Opportunities to all employees and applicants. IND123 Compensation details: 29.5-32 Hourly Wage PIb3c5c189cff0-31181-39074861

rms Company provides contract manufacturing of high-quality, tight-tolerance medical implants, components and sub-assemblies using cutting-edge technology. rms is part of the Cretex Medical family of companies. Learn more at ******************** and ********************** Lathe CNC Machinist Position Summary The Lathe CNC Machinist operates CNC machines to support the manufacture of components and devices for the medical device industry. Shifts Available: 4th Shift Friday - Sunday 5:00 am - 5:00 pm Sign-On Bonus Available: $1,000-$3,000 dependent on level of experience! Responsibilities Lathe CNC Machinist Duties and Responsibilities * Operate Lathe CNC machines * Perform quality inspection on completed parts * Perform preventative maintenance on Lathe CNC machines to ensure consistent machine performance * Complete tool changes Qualifications Lathe CNC Machinist Position Requirements * Operator experience with Lathe CNC machines * Strong math background, preferable in machine math/shop math * Understanding of Geometric Dimensioning and Tolerancing (GD&T) * Ability to read and interpret blueprints * Experience using a microscope * Ability to read measurement equipment such as micrometer, caliper, pressure micrometer Lathe CNC Machinist Preferred Knowledge, Skills and Abilities * Machining experience with medical components, devices, or instruments * Previous experience with tight tolerances * Programming experience with Lathe CNC Machines * Experience with set-up on Lathe CNC Machines * Experience in troubleshooting of Lathe CNC Machines rms Company Benefits As a Cretex Medical company, rms offers a full benefit package to its employees. Benefits include medical, dental, vision and life insurance options. rms also offers a 401(k) retirement plan with employer match, profit sharing, short- term and long-term disability insurance, paid time off, holiday pay, and an onsite medical clinic. rms Company also offers company specific benefits, such as: * Onsite Clinic * Paid Parental Leave * Monthly Social Events * Annual Employee Appreciation Week * Volunteer Opportunities * Training and Development Opportunities * Tuition Reimbursement * Wellness Program Applicants will receive consideration for employment regardless of their race, color, creed, religion, national origin, sex, sexual orientation, disability, age, veteran status, marital status, family status, status with regard to public assistance, or any other protected status as required by law. Our company uses E-Verify to confirm the employment and eligibility of all newly hired employees. To learn more about E-Verify, including your rights and responsibilities, please visit ********************* Cretex Companies use cutting oils, solvents, and other chemicals in the manufacturing process. Testing is conducted on a periodic basis to ensure that all chemicals are kept well below the OSHA permissible exposure levels. Pay Range USD $20.38 - USD $35.72 /Yr.

Job Description Lathe Operator -Northern Iron Location: St Paul MN Pay: $23.00 - $25.00/hour plus an $2.00 for shift differential pay Schedule: 2nd Shift Monday-Thursday 2pm-1230am (Mandatory OT on Fridays When Required) Northern Iron Machine (NIM) is seeking a skilled Lathe Operator to join our team in St Paul MN. This is a great opportunity for a dependable, detail-oriented professional looking to build a long-term career in a growing company that values craftsmanship and teamwork. Key Responsibilities: · Operate lathes and related machining equipment safely and efficiently · Use measuring tools such as micrometers and tape measures to ensure accuracy · Perform routine inspections of tooling and finished parts · Conduct preventive maintenance on equipment · Safely operate overhead cranes and forklifts Qualifications: · 2-5 years of experience operating lathes or similar equipment · High school diploma or technical diploma in a related field preferred · Strong mechanical aptitude and understanding of machining principles · Ability to read and interpret measurements accurately · Excellent attention to detail and commitment to safety Benefits: · Vacation, PTO and paid holidays after 30 days · Health, dental, and vision insurance (eligibility begins first of the month after 30 days) · Company-paid disability and life insurance · 401(k) with company match · Reimbursement for safety boots and prescription safety glasses · Company-provided uniforms · Tuition reimbursement and training programs · Supportive, team-oriented work environment with opportunities for advancement Northern Iron Machine provides a positive work environment, job stability, and long-term career opportunities. We take pride in our team and the quality of work we deliver every day. If you're a qualified Lathe Operator looking for a company where your skills are valued and your growth is supported, apply today. Powered by JazzHR KyX4w1dzti

Resonetics, the world leader in micro manufacturing for the life sciences industry, is changing the industry and elevating the customer experience resulting in rapid growth domestically and internationally. This is a phenomenal opportunity to join an innovative, fast-paced organization with an employee focused culture and put their mark on something meaningful. This individual will be responsible for scaling up small volume to medium volume projects and developing a manufacturable process during this scale up. This individual will have swiss technicians report directly to them and would be responsible for the work of the group. They would be responsible for creating programs using Esprit and or Solidcam and planning and ordering all materials and tooling necessary for small batch runs done in the lab. They would also coordinate with other engineers in the lab to plan equipment. Assist in transitioning Lightspeed projects to production through the defined PReP process in a small team and collaborative environment. 1st shift: 6am-2pm (Monday-Friday) Responsibilities Set-up and operate CNC Swiss machines. (Citizen L12 and L20) Program new parts and improve existing parts using Esprit or Solidcam software Oversee Lightspeed job ensuring consistent quality is achieved, participate in basic process development on Resonetics technology Mentor and train Swiss technicians Work with customers on new projects Help with equipment setup utilizing loosely defined setup process and basic troubleshooting of Resonetics technology workstations Ability to work under minimal supervision, taking responsibility to complete assigned tasks Document process parameters and project details for each Lightspeed project accurately per Resonetics Quality Systems requirements Good understanding of how to develop processes Update data in Resonetics digital systems for responsibilities as instructed with feedback from Engineering Utilize applicable inspection equipment to perform tight tolerance visual inspection of Lightspeed product for complex parts Read and interpret print specifications on Lightspeed projects, ensure all required visual and geometric measurements are taken and documented per Quality Systems requirements Must ensure assigned tasks are completed within the defined timeline while ensuring safety and quality are never sacrificed Seeks continuous self-improvement, open and willing to accept constructive criticism Provide project guidance and technical skill training for Application Development Technicians Demonstrating and training manufacturing methods to Production operators to support new Resonetics programs Ability to adapt quickly and positively to changing priorities and processes Employee must conduct themselves in a professional and appropriate manner and is responsible for maintaining a high standard of conduct and job performance. Actively participate in continuous improvement activities. Other duties as assigned. Required Qualifications 4+ years of Citizen swiss set up or similar 4+ years of programming experience using Esprit and or Solid Cam 2+ years' Experience leading small groups High School diploma or Equivalent Ability to create job related documentation for quality purposes Ability to read and understand engineering drawings per GD&T system Strong communication and organizational skills Preferred Qualifications Prior experience and/or training in production setting and comparable manufacturing preferred. Proven understanding of tooling requirements to setup and operate CNC Swiss machines, including pre-setting of tools. Ability to read and edit programs. Familiarity with ISO Quality System, particularly in medical device manufacturing. Ability to read and understand blueprints and specifications. Srong math background, preferable in machine math/shop math. Ability to apply software used on high precision manufacturing equipment (G-code). Familiarity with ISO certified Quality Systems, particularly in medical device manufacturing Basic understanding of materials science and materials properties, especially for common medical device materials (Nitinol, Stainless Steels, Titanium & other metals, Medical Polymers and Ceramics) Ability to create and troubleshoot programs for inspection devices and other auxiliary equipment Ability to generate drawings and models with 2D & 3D software using GD&T (Solidworks). Compensation The compensation for this role is competitive and will be based on experience and qualifications. The anticipated range is $30-40/hr For temp, temp-to-hire, and regular full-time positions, our company policy is that we are unable to provide visa sponsorship. Candidates must already be legally authorized to work in the United States without the need for sponsorship now or in the future.

ARCH-Minneapolis is looking for motivated machine operators to join our team! Must have some CNC Lathe machining experience or Machine Tool Technology degree. Looking for team members to join on our Weekend Day shift. Multiple opportunities to learn and grow with us. $1000 sign-on bonus! Pay Range: $20-25, depending upon experience. Base plus 15% shift differential. Medical, Dental & Vision effective day one! Competitive 401(k) with employer match and several other benefits offered. Summary Produces machined parts by operating a Lathe computer numerical control (CNC) machine; maintaining quality and safety standards; keeping records; and maintaining equipment. Primary Responsibilities Inspects products during the machining operation to determine if parts meet specifications, complying with established standards and methods for inspection, testing, evaluation and calibration Follow all job work order instructions Must be able to run more than one machine where cycle time permits Complete all required shop floor documentation for the job including both part dimensional and visual inspection Maintain equipment by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; reports to management/maintenance the need for machine repairs Understands and complies with company policy safety guidelines, quality systems requirements and housekeeping standards Qualifications High school diploma or GED equivalent Must be a U.S. Citizen or Permanent Resident, due to contractual requirements Preferred Qualifications Machine Tool Technology degree (completed or pursuing) A minimum of 1 year's experience operating a CNC mill machine Strong mechanical aptitude Ability to read and understand blueprints Strong attention to detail Effective verbal and written communication skills Physical Demands and Work Environment: While performing the duties of this job, continuous mental and visual attention is needed. The ability to stand for a shift, sit, talk and hear is frequently required. Lifting up to 40 pounds is required. Exposure to manufacturing areas where temperature may vary and personal protective equipment is required. Additional Notes ARCH Global Holdings, LLC. is an Equal Opportunity Employee and wholeheartedly supports diversity in the workplace as a basic premise for business success. All employees of ARCH Global Holdings, LLC. are employed on an at-will basis. This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbent(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities.

CNC Swiss Machinist - 2nd Shift Envision your machining experience at work with an industry leader! Enjoy a supportive and inclusive atmosphere with a wide-ranging benefits package, and excellent job security! For over 70 years, Tolomatic has been a family-owned company and over that time has become an innovative leader in pneumatic and motion control products with a global reach. Take advantage of this opportunity to use your machining skills while working on a variety of made-to-order projects. As a part of the team, you will enjoy: A clean, modern, climate-controlled work environment. Convenient location off Highway 55 offering an easy commute. Competitive total compensation package. Starting Pay Range of $23.00 to $36.00 an hour - DOE. Great employee benefits including: Medical, Dental, Disability, Life, PTO, Profit Sharing, 401K Plan, Annual Bonus and Tuition Reimbursement. Real, achievable advancement opportunities. Tolomatic is looking for CNC Swiss Machinists for our 2nd shift: 2nd Shift hours are 3:25pm to 1:55am Monday-Thursday ($1.50/hour Shift Premium) Signing bonus available up to $6,000 depending on shift. About You: Ability to set up CNC Swiss machines Two year Machine Tool diploma or degree or equivalent experience (preferred) Assist with fabricating new components per Engineering drawings Ability to verify work using various measurement methods. Work on jobs according to due date as provided using scheduling system Report job progress using current scheduling system Working knowledge of GD&T Basic computer skills Primary Objective: Our Machinists setup and operate CNC swiss machines to perform routine or repetitive operations in a manner which consistently meets customer specifications, quality requirements, and production standards. The Company: Tolomatic is a leading supplier of electrical linear actuators and electric linear motion control and pneumatic actuators and cylinders. Tolomatic has earned its industry-wide reputation for designing and manufacturing highly durable and reliable electric linear and pneumatic actuators, and power transmission products for a variety of industries including packaging, material handling, medical, food processing, automotive, semiconductor, and general automation. If you have previous experience as a CNC Swiss Machinist, we want to hear from you! Do not miss out on this opportunity. Join the Tolomatic team today! All qualified applicants will receive consideration for employment without regard to the individual's race, color, sex, national origin, religion, age, disability, genetic information, status as a military veteran or any other characteristic protected by applicable law.

Full-time Description At UMC, we don't just make products - we innovate, solve problems, and build a better future. As a proud, privately owned second-generation manufacturer, we've earned our reputation as leaders in our industry by producing highly complex parts with precision and ingenuity. What sets us apart? Our people. We're a passionate team that values collaboration, continuous learning, and going above and beyond. If this sounds like your kind of workplace, keep reading! Why UMC? Generous PTO: Start with 3 weeks of paid time off per year, with accrual starting on day one. Night shift employees receive an additional week of PTO (4 weeks total)! Comprehensive Benefits: Medical, dental, vision, short- and long-term disability, and paid holidays. Competitive Pay: Attractive salary with a 25% pay differential for night shift roles. 401k Match: Dollar-for-dollar matching up to 5%. Professional Growth: Tuition reimbursement for professional development. Work Schedule: Monday through Thursday, 4:30 pm - 3:00 am, onsite in Monticello, MN. About the Role As a Senior Turn Machinist, you will play a key role in the daily operation and setup of Turn machines, ensuring quality, precision, and efficiency in our manufacturing processes. You will be responsible for meeting production goals, troubleshooting processes, and maintaining a safe, high-performing work environment. If you enjoy working with cutting-edge technology, solving problems, and continuously improving processes, and are aligned with our core values- Great People, Going Beyond, and Growing -we would love to have you join our team. What You'll Do Independently set up and operate machines for all jobs, ensuring adherence to company quality standards and production efficiency. Troubleshoot production issues with support from Supervisors and Engineers to ensure smooth production flow. Conducted in-process inspections of machined products, documenting results to ensure products met specifications. Assist Machinists in diagnosing and resolving technical issues that arise during machining operations, leveraging analytical problem-solving to identify root causes and implement effective corrective actions. Maintain a safe working environment, upholding a proactive safety culture by identifying and addressing potential hazards. Requirements What You'll Bring: Education and Experience: Associate's degree in Machining or related field, or work experience in place of education. 5+ years' experience as a machinist; 10+ years' experience preferred. Mori Seiki or DMG Mori Turn experience preferred Skills and Competencies: Ability to express ideas, share information, listen actively, and demonstrate professionalism in written and verbal communication. Able to read and interpret blueprints, use simple math to perform basic calculations, and use hand-held measuring tools. Proficient knowledge of GD&T. Subject matter expert and “go-to” in assigned machining area, collaborating with other Senior Machinists and Supervisors Strong mechanical aptitude. Advanced knowledge of reading G-code and M-code. Excellent attention to detail and problem-solving skills. Able to work efficiently with minimal supervision. Embodies the personal commitment to the shared core values of UMC: Great People, Going Beyond, and Growing. Culture Fit: You're a team player who thrives on collaboration. You bring a growth mindset and embrace challenges with grit. You care deeply about delivering excellence and going beyond expectations. Ready to Join a Winning Team? If you're passionate about building relationships, solving problems, and contributing to a culture of innovation, UMC is the place for you. Let's grow together - apply today and make an impact! UMC is an Equal Employment Opportunity Employer Salary Description $30.77-$40.31/hour

Job Description Bonus: Eligible for up to $5,0000 RELOCATION AND HIRING BONUS Job Title: CNC Machinist Specialist (Expert Level) Department: Machine Shop Reports To: Supervisor of Department FLSA: Non-Exempt Status: Full-Time Shift: 1st & 2nd shift (4x10 Schedule) (1st 5:00 am - 3:00 PM) (2nd 2:45 PM - 12:45 AM) Location: Pueblo, CO (Relocation Assistance Available) Remote: On-Site Pay Range: $30.00-$39.00 Hourly About Gulftech International Our companies are the world's recognized leaders in the engineering, manufacturing, leasing, selling, and servicing of industrial equipment and components serving food production and processing companies. Gulftech's family of companies touches 90% of the world's fresh produce, nuts, and fish products across 85 countries worldwide. About Gulfco Manufacturing Gulfco is a family-owned manufacturing organization with best-in-class operations and a “small company” culture that produces parts, equipment, and industrial solutions for the global food processing and packaging industries. As a proud member of the Gulftech family of companies, we serve as the turnkey supplier to a diverse portfolio of multi-national contract manufacturers, each of which is the leader in their respective market throughout the world. Job Summary Are you a skilled CNC Machinist who thrives on challenging setups and tight tolerances? This role goes beyond button-pushing - we need someone confident in setting up, dialing in, and producing complex, one-off, and low-volume parts with high precision. Responsibilities Must be a subject matter expert in the following functions/activities (perform correctly and without assistance): Able to Run Manual and CNC Machines at an expert Level. Perform full setups on CNC mills and/or lathes from print or model - including indicating vises, fixtures, and part zeros. Interpret complex blueprints, GD&T, and 3D models to execute machining strategies. Adjust feeds, speeds, tooling, and offsets to optimize quality and efficiency. Troubleshoot issues related to tooling, setup, and part accuracy independently. Ensure in-process inspection and first article inspection compliance. Collaborate with engineers and programmers to refine setups and improve processes. What You Bring: 5+ years of CNC machining experience, with a strong emphasis on complex setups and first-run parts. Strong proficiency in reading and interpreting technical drawings, GD&T, and setup sheets. Strong understanding of machine offsets, tool presetting, and basic G/M code. Experience with multi-axis machining or live tooling. Strong understanding of machining processes and techniques. Proficient in reading and interpreting blueprints and technical drawings. Familiar with the use of precision measuring instruments like micrometers and calipers. Solid understanding of lean manufacturing At least 5 years of relevant experience in machining manufacturing. We offer competitive pay, a benefits package, and opportunities for career growth. Benefits and Compensation Two medical plans (PPO & HSA), dental, and vision insurance Paid time off, Vacation, and eight Holidays Employee assistance program (EAP) 401k Profit sharing Free Life Free AD&D Free Disability insurance (Shot and Long-Term Disability) Tuition Assistance Company cell phone/cell phone stipend *Salary information is a general guideline only. Actual compensation considers factors such as (but not limited to) the scope and responsibilities of the position, location, work experience, education, and key skills. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. *Gulfco Manufacturing is dedicated to the principles of equal employment opportunity in any term, condition, or privilege of employment. We do not discriminate against applicants or employees on the basis of age, ancestry, race, sex (including pregnancy and sexual orientation/gender identity), color, religion, national origin, parental status, marital status, political affiliation, family medical history or genetic information, military or veteran status, disability, medical condition, or any other non-merit based factor or status protected by federal, state or local law

Job Description ENJOY THE FREEDOMS OF WORKING IN SOUTH DAKOTA!!! This job is located in Humobldt, SD. Just 20 minutes away from Sioux Falls, SD. APPLY AT: ******************************************************************** Hourly Range $30-$37.50 Duties and Essential Job Functions 2-year Technical degree or equivalent, 5+ years experience and attention to detail is required. Duties will include: -Programming new parts and optimizing existing programs on a Citizen L32 -Performing set-ups on multiple Citizen L32 Swiss machines -Load stock into bar feeder and monitor the machining process -Make necessary adjustments to maintain nominal print dimensions and required surface finishes -Performs visual and physical inspection of parts produced per QMS -Performs accurate transactions (clock on, clock off, entering quantities, closing out operation when done, filling in appropriate paperwork). -Keep a clean and organized work environment -May be responsible for overseeing other Swiss operators Personal Effectiveness Competencies -Integrity: displaying accepted social and work behaviors -Willingness to learn: understanding the importance of learning new information for both current and future problem-solving and decision-making interpersonal skills -Must maintain a positive attitude, leadership skills, independent judgment, and strong communication skills. Academic Competencies -Applied science: using scientific rules and methods to solve problems -Basic computer skills: using a personal computer and related applications to convey and retrieve information -Applied mathematics and measurement: using mathematics to solve problems -Reading for information: understanding written sentences and paragraphs in work-related documents -Business writing: using standard business English -Listening to and following directions: giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times -Locating and using information: knowing how to find information and identifying essential information -Speaking and presentation: speaking so others can understand Workplace Competencies -Business fundamentals: determining how an economy functions as a whole -Teamwork: developed capacities used to work with people to achieve goals -Adaptability and flexibility: being open to change and to considerable variety in the workplace -Marketing and customer focus: actively looking for ways to identify market demands and meet the customer or client needs -Planning and organizing: identifying complex problems and reviewing related information to develop and evaluate options and implement solutions -Problem-solving and decision-making: considering the relative costs and benefits of potential actions to choose the most appropriate one -Applied technology: developed capacities used to design, set-up, operate, and correct malfunctions involving application of machines or technological systems Industry-Wide Technical Competencies -Technical drawings and schematics -CAD drawing fundamentals -Troubleshooting processes -Set up, operate, monitor, control, and improve manufacturing processes and schedules to meet customer requirements Critical Work Functions: -Programming Citizen L32 Work Centers -Perform manufacturing process applications and operations -Production basics -Precision measurement -Manual tool and equipment operations -Basic manufacturing process applications and operations Future Competencies (As Necessary) -Tool Selection training -Speeds and Feed training -GD&T training *Enjoy the freedoms of living in South Dakota!!! Benefits offered: 2 Medical plans, Dental, Vision, LTD, STD, Life, HSA, 3% Simple IRA match and other voluntary plans offered through Aflac, PTO that is accrued at each pay cycle, flexible work schedule and more! #hc43170

Weekend shift- Friday-Sunday, 5:00am-5:20pm (25% shift differential) full-time benefits eligible Our Machinists perform vertical mill machining at very close tolerances, adjust CAM programs using Gibbs CAM, machine set up and inspections of the parts they machine. Machining programs are created by our full-time programmer in Gibbs CAM but all machinists have the ability to edit their programs. The majority of our parts are made from high performance plastic; however, machinists will also work with aluminum, 303 stainless steel and machinable ceramic. Short runs, no production work. All newer CNC vertical milling machines-Kira and Kitamura Super clean and bright shop! Very rewarding work - no long-run production parts Qualifications Minimum of either a Two-year Vo-Tech education in CNC Machining Technology OR Right Skills Now Certificate for manufacturing and 6 months related machining experience OR 1+ year manual/CNC machining experience. Ability to perform close tolerance work, read and comprehend part drawings and inspect his/her own work using both computer controlled and hand tool inspection equipment Programming experience with any CAM packages a plus (Virtual Gibbs highly preferred) Motivated, responsible, cooperative Pay range for this position is $24.00 to $38.00. A 25% pay differential for weekend shift is available for this position. This salary information serves as a general guideline for starting wages. Several factors are considered when making an offer for this position including but not limited to work experience, education, geographic location, certifications, key skills, market and business conditions. Johnstech can share more about the specific compensation package for your preferred role during the hiring process. Benefit offerings and perks for full-time employees include: Medical Insurance (ICHRA) Health Savings Account (HSA) for qualified insurance plans- employer and employee funded Flexible Spending Account (FSA) for qualified insurance plans-employee funded Dental Insurance Vision Insurance Accidental Insurance Critical Illness Insurance Basic Life & AD&D Insurance Supplemental Life & AD&D Insurance 401(k) Safe Harbor Plan + company matching Short Term Disability Insurance Long Term Disability Insurance Tuition Assistance Paid Time Off - Holiday, Personal Holiday, Volunteer Day and accrued PTO Paid Parental Leave Paid Bereavement Paid Jury Duty Free parking Complimentary coffee (Caribou), apple cider, hot chocolate, tea & fresh popped popcorn! About Johnstech Founded in 1991, Johnstech's designs, patents and manufactures high performance test sockets are sold primarily to integrated circuit manufacturers and IC test contractors. The company's patented technologies allow its contactors to achieve far greater accuracy and improved reliability in test results. These high-performance contactors are leading an industry-wide move away from traditional test sockets. Johnstech is headquartered in Minneapolis, Minnesota, with offices in Singapore and Philippines. For more information, visit ****************** Johnstech is an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate on the basis of race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law.

rms Company provides contract manufacturing of high-quality, tight-tolerance medical implants, components and sub-assemblies using cutting-edge technology. rms is part of the Cretex Medical family of companies. Learn more at ******************** and ********************** Lathe CNC Machinist Position Summary The Lathe CNC Machinist operates CNC machines to support the manufacture of components and devices for the medical device industry. Shifts Available: 4th Shift Friday - Sunday 5:00 am - 5:00 pm Sign-On Bonus Available: $1,000-$3,000 dependent on level of experience! Responsibilities Lathe CNC Machinist Duties and Responsibilities Operate Lathe CNC machines Perform quality inspection on completed parts Perform preventative maintenance on Lathe CNC machines to ensure consistent machine performance Complete tool changes Qualifications Lathe CNC Machinist Position Requirements Operator experience with Lathe CNC machines Strong math background, preferable in machine math/shop math Understanding of Geometric Dimensioning and Tolerancing (GD&T) Ability to read and interpret blueprints Experience using a microscope Ability to read measurement equipment such as micrometer, caliper, pressure micrometer Lathe CNC Machinist Preferred Knowledge, Skills and Abilities Machining experience with medical components, devices, or instruments Previous experience with tight tolerances Programming experience with Lathe CNC Machines Experience with set-up on Lathe CNC Machines Experience in troubleshooting of Lathe CNC Machines rms Company Benefits As a Cretex Medical company, rms offers a full benefit package to its employees. Benefits include medical, dental, vision and life insurance options. rms also offers a 401(k) retirement plan with employer match, profit sharing, short- term and long-term disability insurance, paid time off, holiday pay, and an onsite medical clinic. rms Company also offers company specific benefits, such as: Onsite Clinic Paid Parental Leave Monthly Social Events Annual Employee Appreciation Week Volunteer Opportunities Training and Development Opportunities Tuition Reimbursement Wellness Program Applicants will receive consideration for employment regardless of their race, color, creed, religion, national origin, sex, sexual orientation, disability, age, veteran status, marital status, family status, status with regard to public assistance, or any other protected status as required by law. Our company uses E-Verify to confirm the employment and eligibility of all newly hired employees. To learn more about E-Verify, including your rights and responsibilities, please visit ********************* Cretex Companies use cutting oils, solvents, and other chemicals in the manufacturing process. Testing is conducted on a periodic basis to ensure that all chemicals are kept well below the OSHA permissible exposure levels. Pay Range USD $20.38 - USD $35.72 /Yr.

Challenge Machine and Manufacturing, a part of Assurance Manufacturing, is 100% employee owned. We are currently seeking a Prototype CNC Mill Machinist (Set Up) for our 1st shift. Challenge Machine is a small contract machine shop that serves the Semiconductor, Medical and Aerospace industries. We machine a variety of smaller components made from exotic plastics and both ferrous and non-ferrous materials. The Prototype CNC Mill Machinist (Set Up) is responsible for machining of parts to meet customer specification and maintain a high level of quality. Prototype CNC Mill Machinist Responsibilities: Set up and run CNC mill to machine parts to customer supplied print/specifications. Follows Gibbs CAM program for machining operations and tooling requirements. Make adjustments to program and machine as necessary in order to meet print. Inspect parts for conformance to specifications. Conducting physical first article inspection at machining station. Follows ISO and 6S procedures. Communicate shop needs to management. Keeping necessary records. Maintaining equipment and supplies. May run more than one machine simultaneously. Maintains clear and honest communication at all times. Learns and applies the latest relevant knowledge to the work. Follows work order procedures and routings. Maintains, organizes, and cleans equipment and the work area. Notifies supervisor when faulty equipment or defective materials are discovered. Follows Control of Nonconforming Product Procedure. Follows procedures in relation to inspection of parts. Crosstrain in other areas of the plant as necessary to meet production demands. Adhere to all safety rules and guidelines. Keep the work environment safe and tidy. Prototype CNC Mill Machinist Qualifications: High School diploma or equivalent education required. Certificate in machine shop technology or machine tool technology/machinist preferred. Minimum of 2 years manufacturing experience. Minimum of 1 year of general machine operating experience. Knowledge of operations including drilling, boring and milling etc. employing recognized tooling and procedures and where tolerances are close, but not difficult to maintain is required. Ability to work from programming instructions, operational data and machine setup instructions defining and coding tool arrangements, material clamping methods, machine calibrations and console settings, for operations such as bore, mill, drill, face, thread and occasional profiling contouring. Strong analytical, communication, and computer skills. Attention to detail and self motivated. Good teamwork skills. Good organizational, interpersonal and communication skills. Strong and positive work ethic. Time management skills. Ability to multitask. Basic understanding of technical plans, drawings, models and blueprints. Basic understanding of Geometric Dimensioning and Tolerancing (GD&T). Excellent ability to read and listen to assignments given in a variety of forms. Basic understanding of mathematics. Ability to measure parts with calipers and micrometers. We offer a comprehensive compensation and benefit package that includes medical/HSA, dental, vision, STD, LTD, basic life, voluntary life, vacation, 401k with company match, Employee Stock Ownership Plan (ESOP) and discretionary bonuses. Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Challenge Machine & Manufacturing 1651 99th Lane NE, Blaine, MN 55449 We participate in E-verify.

TOMZ Corporation, a leader in manufacturing of devices and components for major medical device companies, is looking for a motivated CNC Machinist to join our organization. TOMZ offers competitive compensation and excellent benefits, including 401k, health/dental, vision, and paid time off. TOMZ maintains a modern, clean, and safe facility with state-of-the-art equipment and dedication to continuous process improvement. TOMZ is registered with the FDA as a Class 2 and Class 3 Medical Device Manufacturer and certified to ISO 13485. Summary of Position Reporting to the Operations Supervisor, this position will have direct responsibility for the set-up and manufacture of components within the Swiss machining department. TOMZ manufactures parts via high- precision metal machining, finishing, assembly, and anodizing processes for Medical Devices. The successful candidate will be expected to maintain the ISO 13485 standards documentation, set up and operate equipment, and perform visual and dimensional inspections on machined components using various precision measuring equipment. Essential Functions * Operate and maintain Citizen Lathes, Tsugami Lathes, Index multi-spindle lathes, 3-4-5 axis production equipment, including Robo Drills, Mill Turn, and horizontal/vertical mills. * Perform offsets and tool changes to ensure efficient production with minimal support. * Set up complex legacy components and new production orders for steady machine operation. * Conduct visual and dimensional inspections using microscopes, micrometers, calipers, pin gauges, thread gauges, comparators, Micro-Hite, CMM, and vision systems. * Perform scheduled and regular preventive maintenance on equipment. * Drive problem-solving activities for complex machine or process issues. * Complete and compile documentation related to quality inspection standards. * Ensure proper material control, identification, and traceability for conforming and nonconforming materials. * Support Quality Best Practices and contribute to continuous improvement in GDP/GMP. * Capable of mentoring and training lower-level machinists. * Facilitate a continuous improvement in culture and ensure quality and delivery objectives are met. * Utilize ERP and QMS systems to document and control inspection and traceability activities. * Maintain safe working conditions and follow occupational safety and health requirements, including PPE guidance. * Adhere to the TOMZ Quality Management System. * Perform other duties as assigned. Qualifications: Education * Certification from a technical school program or equivalent, directly transferable work experience in a manufacturing or engineering discipline may be accepted. * Certification from a technical school program is strongly preferred. Experience * Minimum of 3-7 years' experience in a regulated manufacturing environment. Qualifications * Experience in Class I, II, and/or III medical device manufacturing within a regulated environment using calibrated equipment and hazardous materials. * Relevant job experience in regulated manufacturing, with industry experience in aerospace, defense, or automotive. * Knowledge of and experience with GMP/ISO standards. * A self-starter capable of working independently and as part of a team, with the ability to collaborate across various functional areas, including R&D, Manufacturing, and QA, to achieve results with minimal guidance. * Advanced understanding of mechanical equipment usage, care, and inspection processes. * Ability to use hand-held tools for preventive maintenance, repairs, and tool changes. * Skilled in reading and understanding of blueprints, specifications, and procedures. * Detail-oriented with the ability to maintain accuracy and complete tasks promptly. * Proficient in identifying nonconformances and maintaining organization. * Intermediate skills in GD&T. Preferred Skills * Strong verbal and written English language communication skills. Physical Demands * Ability to bend, stoop, squat, kneel, and lift up to 50 pounds. Team lift or mechanical assistance required for objects over 50 pounds. * Perform repetitive hand and arm movements while lifting up to 20 pounds, including gripping, twisting, and placing components for extended periods, and lifting objects overhead. * 20/20 vision (assisted or unassisted) required for sorting raw and non-conforming materials. Good dexterity is needed for managing small to medium products. * Exposure to oil, grease, occupational noise, cleaning solvents, dust, metal particles, sparks, coolant, and sharp-edged materials. Personal protective equipment (PPE) such as safety glasses, dust masks, ear plugs, cut-resistant or chemical-resistant gloves, and engineering controls may be required. * Ability to sit or stand for prolonged periods. WEEKEND SHIFT: 20% DIFFERENTIAL 5AM-5PM FRI-SUN 2ND SHIFT: 15% DIFFERENTIAL 5PM-3:30AM 1st shift- No differential Pay range: $31.00-$37.00

Mid Continent Engineering is seeking a CNC Machinist to join our team! This is a 1st Shift- 6 am to 4:30 pm, Monday through Thursday opportunity. Mid-Continent has been a supplier to first-tier OEMs within the medical, aerospace and defense industries for decades. Mid-Continent Engineering stuffs the armed forces supply chain with products of our capabilities such as precision machining, aerospace welding, chromate conversion, paint/powder coat finishing, mechanical assemblies, and other design-assist services. A few things we have to offer: Competitive Wages Medical, Dental & Vision for employee & family including domestic partners. 401k Tuition Reimbursement PTO accrual starts immediately. Yearly shoe allowance Referral Program Summary: This position will be responsible for the set-up, adjustment, and operation of CNC Mill Machines. Use of tools to perform progressive machining operations on a variety of standardized work, having close tolerances and finish requirements. Essential Duties & Responsibilities include the following: The ability to operate and set-up CNC Mill Machines. Analyze drawings, sketches, and design data of parts to determine dimension & configuration of cuts, selection of cutting tools, machine speeds and feed rates. Revise program if needed to eliminate instruction errors or omissions. Use shop equipment, overhead cranes, chains, slings, and forklifts in a safe manner. Communicate with co-workers/supervisors to maintain a safe and positive work environment. Perform other duties, as assigned. Education & Experience: High School Diploma or G.E.D. Prefer a degree from a two-year technical school. 3+ years of CNC Mill Machine or relevant shop experience Programming experience with Surf Cam or Mastercam, is a plus. Ability to read and interpret blueprints, written instructions, and processing. Epicor ERP Software experience is a plus. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand; walk; use of hands, fingers, feet, and hands to reach with arms. The ability to talk or hear. The employee is occasionally required to sit; climb or balance and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Employees must be able to cope with Minnesota climate variances, endure heat & cold conditions in the shop. Endure heavy workloads, high noise levels from hammering, and grinding (hearing protection provided). Protect against metal particles, fumes, sparks, particles, and gases (safety glasses, safety-toed boots, ear plugs, and gloves provided per the company policy guidelines). Individuals working in an office setting will not endure some of the physical & work environments conditions of the production floor unless office is adjacent to the production floor or per the individuals job duties and/ or responsibilities. All office personnel must abide by the PPE guidelines (safety glasses, safety-toed boots that are provided per the company policy guidelines) when entering the production floor or if a requirement of a department that individual is entering or working in. 1st Shift- 6 am to 4:30 pm- Monday through Thursday

MultiSource Manufacturing LLC is a customer-focused contract manufacturer working to provide high quality engineering and fabrication services. We strive to be a comprehensive resource for all the services you need from hands-on project management to industry standardized installation. For precision machining to complete assembly, MultiSource is your one-stop-shop for quality, efficiency, and excellence in manufacturing. JOB DESCRIPTION: Sets-up, operates, and verifies the quality of work on a wide variety of CNC Milling machines involving close tolerances and difficult set-ups. Performs routine or repetitive operations in a manner which will consistently meet quality requirements and production standards. Actively participates in continuous improvement activities. SCHEDULE: 1st shift; Monday-Friday, 7:00am-3:30pm OR 2nd shift; Monday - Thursday,3:30pm to 2:00am. ESSENTIAL FUNCTIONS AND BASIC DUTIES: * Monitors variations in sequence, e.g., positioning, cycle time, etc., and makes necessary corrections. * Performs repeat set-ups without supervision. May perform more complex set-ups with supervision. * Works from drawings and/or specifications with direction from the Team Leader. * Troubleshoots routine jobs without supervision and more complex jobs with supervision. * Runs production and deburrs parts as required. * Studies specifications, blueprint, drawings or sample prototypes to determine dimensions and tolerances of finished parts. * Select and align tooling, fixtures and attachments for machining. * Adjust machine to produce a conforming product. * Perform in-process inspection of own work while running machine. * Complete required paperwork and keep material and paperwork organized. * Maintains work area in a neat and orderly condition. Works safely, and complies with all established safety rules and work practices. * Maintain and care for all shop tools, machines and equipment. * Conform to the company quality system as documented. QUALIFICATIONS: * EDUCATION/CERTIFICATION: High school education or equivalent, plus at least 2 years of Vo-Tech training in machine tool technology or a related area or equivalent. * EXPERIENCE REQUIRED: At least 5 to 7 years of Mill machine set-up and operating experience in a job shop environment. * PHYSICAL STRENGTH: Lift up to 40 pounds. * LANGUAGE ABILITY: Ability to understand and follow instructions in English. * SKILLS ABILITIES: Very strong mechanical aptitude and problem-solving skills. * REQUIRED KNOWLEDGE: Ability to read blueprints and use measuring instruments. BENEFITS AND COMPENSTION: MultiSource Manufacturing LLC offers competitive salaries and benefits - many benefits begin the first of the month after 30 days of employment. Benefits include: medical, dental, vision, life insurance, 401(k), paid time off, and much more!

Job Description Mid Continent Engineering is seeking a CNC Machinist to join our team! This is a 2nd Shift-4 pm to 2:30 am, Monday through Thursday opportunity. The shift premium for 2nd Shift is $2.00, an hour. Mid-Continent has been a supplier to first-tier OEMs within the medical, aerospace and defense industries for decades. Mid-Continent Engineering stuffs the armed forces supply chain with products of our capabilities such as precision machining, aerospace welding, chromate conversion, paint/powder coat finishing, mechanical assemblies, and other design-assist services. A few things we have to offer: Competitive Wages Medical, Dental & Vision for employee & family including domestic partners. 401k Tuition Reimbursement PTO accrual starts immediately. Yearly shoe allowance Referral Program Summary: This position will be responsible for the set-up, adjustment, and operation of CNC Mill Machines. Use of tools to perform progressive machining operations on a variety of standardized work, having close tolerances and finish requirements. Essential Duties & Responsibilities include the following: The ability to operate and set-up CNC Mill Machines. Analyze drawings, sketches, and design data of parts to determine dimension & configuration of cuts, selection of cutting tools, machine speeds and feed rates. Revise program if needed to eliminate instruction errors or omissions. Use shop equipment, overhead cranes, chains, slings, and forklifts in a safe manner. Communicate with co-workers/supervisors to maintain a safe and positive work environment. Perform other duties, as assigned. Education & Experience: High School Diploma or G.E.D. Prefer a degree from a two-year technical school. 3+ years of CNC Mill Machine or relevant shop experience Programming experience with Surf Cam or Mastercam, is a plus. Ability to read and interpret blueprints, written instructions, and processing. Epicor ERP Software experience is a plus. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand; walk; use of hands, fingers, feet, and hands to reach with arms. The ability to talk or hear. The employee is occasionally required to sit; climb or balance and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Employees must be able to cope with Minnesota climate variances, endure heat & cold conditions in the shop. Endure heavy workloads, high noise levels from hammering, and grinding (hearing protection provided). Protect against metal particles, fumes, sparks, particles, and gases (safety glasses, safety-toed boots, ear plugs, and gloves provided per the company policy guidelines). Individuals working in an office setting will not endure some of the physical & work environments conditions of the production floor unless office is adjacent to the production floor or per the individuals job duties and/ or responsibilities. All office personnel must abide by the PPE guidelines (safety glasses, safety-toed boots that are provided per the company policy guidelines) when entering the production floor or if a requirement of a department that individual is entering or working in. 2nd Shift- 4 pm to 2:30 am- Monday through Thursday 2nd Shift hourly premium $2.00, an hour

Dahlquist Machine Dahlquist Machine by Fathom is the premier precision machining company in America with over 30 state-of-the-art CNC mills and lathes paired with over 50 years of industry experience. Centrally located in a northern suburb of Minneapolis, Dahlquist Machine produces high-quality products with 100% on-time delivery-specializing in short- to medium-run quantities for high precision light metals, aluminum, and plastic parts. Fathom Manufacturing Fathom is one of the largest digital manufacturing platforms offering on-demand manufacturing in North America. With more than 90 large-platform industrial-grade 3D printing machines and a national footprint with more than 500,000 square feet of manufacturing capacity across 12 facilities, Fathom seamlessly blends in-house capabilities across plastic and metal additive technologies, CNC machining, injection molding & tooling, urethane casting, sheet metal fabrication, and design and engineering. Vertical Milling Machinist Position Summary: The CNC Vertical Mills Machinist plays a critical role in producing high-quality, intricate parts within a fast-paced manufacturing environment. This position requires proficiency in setting up and operating advanced CNC vertical machining centers (Brother, OKK, and YCM), employing MDI (Manual Data Input) programming, and performing manual inspections to ensure precision. By leveraging strong problem-solving skills and attention to detail, the Machinist will troubleshoot issues, work with diverse materials-such as aluminum, plastic, and steel-and drive continuous improvement throughout the machining process. By collaborating with cross-functional teams and maintaining clear communication across shifts, the CNC Vertical Mills Machinist ensures all parts meet Dahlquist Machine by Fathom's rigorous quality standards and on-time delivery goals. This role demands the ability to make critical decisions under pressure, a commitment to safe work practices, and strict adherence to company EH&S policies. Through exceptional technical expertise and dedication to efficiency, the CNC Vertical Mills Machinist propels the growth of Dahlquist Machine by Fathom and aligns with Fathom's on-demand manufacturing vision. Key Responsibilities: * Set up and operate CNC vertical machining centers (Brother, YCM, and OKK) * Perform MDI (Manual Data Input) programming for efficient part production * Conduct manual inspections using gauges and instruments to ensure part quality before submitting to the Quality Department for CMM inspection * Interpret complex 2-D drawings and apply GD&T principles * Monitor and inspect parts throughout the machining process * Follow company quality and safety procedures * Communicate and collaborate with team members to resolve technical issues * Participate in lean manufacturing initiatives to improve processes Qualifications/Requirements: * Associate degree in a relevant field, or 3+ years of experience in milling, or 5+ years of overall CNC machining experience * Familiarity with Brother, OKK, or YCM machines preferred * Experience with various materials, such as aluminum, plastic, and steel * Ability to read and interpret blueprints * Proficiency in manual inspection using gauges and instruments in support of CMM inspection * Strong work ethic and attention to detail * Ability to thrive in a fast-paced, team-oriented environment * Capable of handling sensitive and confidential information * Good communication skills for effective teamwork Hours: 5:45a.m. - 3:45 p.m. Monday - Thursday Equal Opportunity Employer/Veterans/Disabled This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. If E-Verify cannot confirm that you are authorized to work, this employer is required to give you written instructions and an opportunity to contact Department of Homeland Security (DHS) or Social Security Administration (SSA) so you can begin to resolve the issue before the employer can take any action against you, including terminating your employment. Employers can only use E-Verify once you have accepted a job offer and completed the Form I-9.