Numerical control operator jobs in Newton, MA - 642 jobs

CNC Programmer / Fabrication Specialist Must have active Secret Clearance Seeking an experienced fabrication specialist and machinist with expertise in complex parts development, providing autonomy over their fabrication approach, fixture design/fabrication, tooling, CAM programming, setup, and machine operation. The ideal candidate is a talented, creative, and motivated individual with a strong aptitude for problem solving, critical thinking, creativity, and excellent interpersonal, verbal/written communication, and time management skills with an enthusiasm, aptitude and willingness to learn new state-of-the-art technologies and software. Given the nature of working in a high precision environment, meticulous attention to detail is paramount in successful execution and delivery of high-quality hardware that's instrumental to program success. The position supports high precision mechanical fabrication that oftentimes requires leveraging several advanced manufacturing technologies in series to achieve the final deliverable part. . Requirements: 10+ years of direct experience in simultaneous 5-axis machining, including setup, CAM programming, tooling selection, and CAM simulation Competency reading mechanical drawings and interpreting GD&T Ability to design and fabricate basic fixtures Experience using basic hand tools and inspection equipment, such as: Calipers, thread/pin gages, micrometers, dial indicators Previous experience with the following software types: CAM software, 3D CAD, MS Office (Excel. Word, Outlook) Enthusiastic to learn new fabrication techniques, technologies, and machine tools Ability to work in a team environment and collaborate with other Laboratory personnel to solve fabrication challenges Comfortable attending manufacturability reviews with confidence to participate and provide feedback Self-motivator with excitement for working in R&D environment supporting novel prototype development that demonstrates technology of national importance Maintain a clean and well-organized work area and follow safety protocols Ability to lift up to 50lbs Desired Skills: Previous work in high mix, low volume job shop environment SolidWorks CAD software hyper MILL CAM software M&H on machine inspection software Heidenhain iTNC 530 controller Prior experience machining any of the following: Titanium, Invar, Metal Matrix Composites (MMCs), Hastelloy, 17-4 PH, Invar, Fiber Reinforced Composites Digital fabrication tools, such as; Model Based Definition (MBD), Product Lifecycle Management (PLM) software (Aras Innovator) Exposure to ultrasonic machining

A prestigious educational institution located in Boston is seeking an Associate Vice President & University Controller to manage financial operations, ensure compliance, and lead the accounting staff. Candidates should possess a CPA and have significant experience in financial management and leadership. The role involves overseeing audits, financial reporting, and staff development. The institution offers comprehensive benefits including health, dental, and generous tuition remission for employees and their dependents. #J-18808-Ljbffr

Job Title: Brake Press Operator- 2nd Shift Schedule: Monday-Thursday, 4:00 PM - 2:30 AM Company: Munters Corporation Salary: $24.03- $30.39 per hour + 15% shift differential About Us: Munters is a global leader in climate solutions for mission-critical processes. We offer innovative, efficient and sustainable solutions for customers in industries where controlling indoor humidity, temperature and energy efficiency is mission-critical. Climate control systems often account for a large percentage of the energy consumption in many of our customers'operations. With an optimal climate system, we can help them to more efficiently use energy or waterresources, and thereby reduce their climate and environmental impact. Sustainability is an important part of Munters' business strategy and value creation.We pride ourselves on fostering a dynamic and inclusive work environment where our employees are valued members of the team and are given meaningful projects to work on. Work Schedule: Monday-Thursday 4:00 pm-2:30 am JOB SUMMARY: Utilize press brake to form components using engineering drawings. ESSENTIAL FUNCTIONS: * Form components using engineering drawings * Roll parts using power rolls * Work in other areas when needed. ADDITIONAL RESPONSIBILITIES: * Maintain ISO-9001 standards * Observe all safety rules. KNOWLEDGE/SKILLS/ABILITIES: Ability to set up and operate Amada Press Brake JOB QUALIFICATIONS: * High School/Trade School * 1-5 years related experience. Benefits: Competitive salary Comprehensive health, dental, and vision insurance plans. Generous vacation and paid time off. 401(k) retirement savings plan with employer matching. Professional development opportunities, including tuition reimbursement and conference attendance. Company-sponsored social events and team-building activities. State-of-the-art equipment and tools to support your work. Equal Opportunity Employer: We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. All offers are contingent on a pre-employment drug test, background check, and physical as applicable for the position. #HPMUNTERS

The responsibilities of a Zund/CNC Operator are to set up and operate digital die cutting equipment and ensure the customer needs are met by producing high quality printed material in a safe, productive manner. Effectively run all digital die cutting equipment Complete jobs according to customer specifications by producing quality work and performing quality checks Monitor production throughout the run for quality, maintaining all required samples as designated by the customer and procedures Complete standard set up and standard adjustments Perform basic preventative maintenance in accordance with production schedule Change modules, bits, blades and tools on all Zund equipment. Meet customer needs by reviewing and following the posted Zund schedule Troubleshoot various press issues as needed Ensure have proper press supplies/inventory on hand to meet production needs Move materials via material handling equipment including forklift and pallet jacks Track job costs/production hours as applicable Perform maintenance to department equipment Contribute to safety goals by maintaining a clean, clutter-free workplace, report potentially unsafe conditions and ensure that the department meets and exceeds safety requirements Meet productivity and quality standards by completing work in timely and accurate manner Work overtime as needed Other duties as assigned Minimum Qualifications High school diploma or general education degree (GED) Basic computer skills including email, basic mouse, keyboard and menu navigation Basic math skills including addition, subtraction, multiplication, division and measurement Ability to communicate/understand basic written and verbal instructions Able to be certified in driving a fork truck and unitize a pallet jack Preferred Qualifications 1 plus years of experience working in printing, manufacturing, distribution and/or fulfilment Physical Requirements Frequent reaching, bending, climbing, kneeling, crouching, and stooping Frequent walking and standing for prolonged periods of time Ability to lift, pull, push up to 50 pounds Ability to visually inspect all work for defects Compensation: $18.00 - $25.00 per hour At FASTSIGNS, every day is unique and presents exciting opportunities, including new ways to use your talent and grow your skills. We have a large network of independently owned locations - both locally and internationally - who offer competitive pay and ongoing training opportunities. Are you ready to plan for your future? Discover your next career. Make your statement. Learn more by exploring the positions offered by FASTSIGNS centers. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to FASTSIGNS Corporate.

Tutor Intelligence, an MIT robotics startup, has developed a novel no-code interface to instruct robots on new tasks. We are deploying this technology to factories and warehouses across America, and are growing our team to support 24-7 operations. This is an operational role - perfect for someone who is looking to get involved with technology and join a fast-moving startup. In this role, you will work to keep the robots in the field happy and healthy. Your responsibilities include: * Instructing robots via a web-based portal* Responding to customer support calls and resolving technical issues* Learning protocols for diagnosing and solving robot issues* Tracking robot performance and providing feedback to engineering* Reporting bugs and testing new features This role is shift-based and requires regular weekend coverage. Shift 1: 6:30am - 3:30pmShift 2: 3pm - 11pmShift 3: 11pm - 7am (Overnight) Shift 4: 11am - 7pm (Sat-Weds) We have weekend and holiday operations, which mean you will be scheduled for at least one weekend day and holidays (as needed). This opportunity comes with benefits, including health insurance. We are fully in-person in Watertown MA, with parking onsite. We are a startup looking for people who are eager and excited to do what they can, to ensure the team is making progress and our mission is successful. If this sounds like you (and you don't mind hanging with a bunch of robot nerds :), then we look forward to your application!

Job Description Nova Biomedical: One Global Brand. One Vision. Together under one name. Advanced Instruments and Nova Biomedical are now united under one brand, Nova Biomedical, marking a major milestone in our journey to deliver greater value to our customers. By combining our strengths, we're accelerating innovation, supporting critical workflows, and delivering world-class service across the biopharmaceutical and clinical markets. About the company At Nova Biomedical, we're not just building instruments, we're powering breakthroughs that improve lives. Our smart, science-driven solutions are trusted in over 100 countries to speed drug development and enhance patient care. Our integration brings together more than 70 years of scientific excellence with Nova's cutting-edge innovation, forming a powerhouse of precision, purpose, and possibility. With FDA-registered, ISO-certified manufacturing, more than 125 FDA approvals, and industry-trusted diagnostics, we're setting new standards in quality and reliability. Nova Biomedical is proud to be a global leader in osmolality testing and biotechnology and in vitro diagnostic (IVD) instrumentation, dedicated to advancing patient care and scientific discovery with a legacy that continues to shape the future of life sciences. With headquarters in Norwood and Waltham, Massachusetts, and a global team of nearly 2,000 employees, we're building a collaborative, empowered culture grounded in shared values: Customer Centricity, Ingenuity, Ownership & Accountability, Collaboration, and Integrity. Working at Nova Biomedical means joining a mission-driven organization where your contributions matter. Whether you're in engineering, science, manufacturing, or support, you'll be part of a team that values innovation, invests in your growth, and is committed to making a real-world impact on global health. Explore what's next with us at novabiomedical.com or aicompanies.com About the role Responsible for operation, set up, and programming of all manual and automated equipment in the shop. Must be proficient in Mastercam CAD system. If you're passionate about CNC machinery / programming and want to be part of a team that is shaping the future of life sciences, we'd love to hear from you, apply today! What you'll do Ability to set up all shop equipment including the Manual Milling, Lathe and Trak Lathe machines Ability to program all manual and automated equipment and machines Set up and maintain operation of CNC Millers and Lathes, including tool offsets and editing of CNC programs Responsible for part quality, dimensional inspections and meeting time standards Maintaining equipment upkeep and a clean Model Shop overall What we are looking for in you Read and write English and follow written/verbal instructions Perform Machine Shop math Working knowledge of Good Manufacturing Practices (GMP) Be able to work independently Proficient with all shop measuring tools Five plus years of Machine Shop experience and the skill level of Machinist A with programming knowledge High School or Technical School graduate Physical Requirements for this role include: Ability to lift up to 50 lb. Ability to work while standing, sitting, or bent for prolonged periods Ability to work in a loud Machine Shop environment with CNC mill and lathe machines Ability to wear PPE eyewear The full list of physical requirements for this role is available upon request. Why work for Nova Biomedical Flexible Medical, Dental, & Vision Coverage Competitive 401k company match Bonus Program, Generous PTO and paid holidays Generous Tuition reimbursement Hybrid and flexible work arrangements (job specific) Professional development, engagement and events Company marketplace for lunch and snacks! (location specific) Company subsidized cafeteria (Waltham) Work Location: On-site in Waltham Schedule/Hours: Monday to Friday, 7am - 3:30pm Targeted Salary Range: $39 -$43 Nova Biomedical believes in transparency and integrity throughout all we do, including compensation. The provided salary range for this role represents the expected base salary or hourly rate for this opening. Actual compensation will be commensurate with the candidate's experience and may vary based on individual factors such as location, skills, and education. EEO Statement: Nova Biomedical takes pride in being an equal opportunity employer committed to hiring a diverse and inclusive workforce. As a part of our commitment to a diverse and inclusive workforce, Nova Biomedical will continue to take steps to assure that recruitment, hiring, assignment, promotion, compensation, and all other personnel decisions are made and administered without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, gender expression, veteran status, age, mental or physical disability, genetic information or any other protected class. Privacy policy *******************************************************************

SummaryJob Description If you want to do work that really matters among a team of spirited and collaborative individuals, you need to know more about GE Aerospace. We've become a world leader in the design, development and manufacture of advanced aviation technologies including jet engines, components, and integrated systems for commercial and military aircraft. We're a people-first organization that will bring out your best ideas and performance as part of our on-going LEAN transformation. We believe that the world works better when it flies. Do you? If so, come aboard. Working at our Lynn Facility Come and elevate your career in a facility that combines a rich tradition of aviation technology with a deep commitment to the future of flight. The GE Aerospace manufacturing site in Lynn designs, produces, assembles, and tests military and commercial aircraft engines and components. With more 2,500 employees and 1.6 million sqft of manufacturing space, we're making a huge contribution to the future of flight. And, considering that very first jet engines were born here in 1942, we clearly are the career home of people who are deeply knowledgeable about building quality engines. What's more, GE Aerospace has invested more than $100 million in our facility in the last five years alone. By engaging with highly collaborative teams, we're reaching for new Sustainable Aviation Fuel milestones every year. And by encouraging our teams to join us in extensive community service and volunteerism, we're making a difference in all the ways that matter. Here are just a few of the best reasons you will want to consider us: Do work with a real purpose helping to solve the global challenge of how the world flies more sustainably. Be a part of a global workforce of diverse backgrounds, perspectives, ideas, and experiences where everyone feels supported and respected. Earn merit-based rewards and incentives. Free Onsite Parking. Set work schedule with no mandatory overtime. Work in a climate-controlled building out of the elements. Have opportunities for continuous learning and development. POSITION RESPONSIBILITIES: • Develop 2 and 3-axis N/C processes for development hardware (i.e., machining programs, tooling,) as well as 4 and 5 axis N/C processes. • Contribute to process improvement efforts on mature hardware with similar support. • Set up and operation of machine tool equipment (both N/C and standard types to support development/production cell activities) • Work to blueprints, sketches, and verbal instructions to produce development hardware. • Perform in-process dimensional checks, including CMM operations/set up. • Troubleshoot process issues. • Create development/production planning and support revisions of production planning as appropriate for process changes. • Provide direction to other skilled employees involved with development and production. • Perform other related duties as required MINIMUM QUALIFICATIONS: • Bachelor's degree from an accredited university/college OR associate degree with a minimum of 2 years in manufacturing experience OR a High School Diploma/GED with a minimum of 4 years manufacturing experience; All manufacturing experience must be specifically machining, assembly, machine repair or inspection. • NC programming experience (APT, UG, or other structured systems.) • Proficient in shop mathematic i.e. geometry and trigonometry, blueprint reading, geometric dimensioning, and tolerances DESIRABLE QUALIFICATIONS: • Apprentice graduate. • Machining experience, NC and/or manual • Strong oral and written communication skills. • Manufacturing experience • Experience in tooling and fixturing, STAS, tooling vendors, Maximo generation. • Ability to work with minimal supervision and direction - self-starter. • Ability to interface with various levels of management (i.e., Design Engineering and Project) and shop floor workforce. • Ability to maintain relationships that facilitate task accomplishment; to cooperate and resolve conflicts; to recognize needs and be sensitive of others. • Ability to receive guidance and supervision; follow work rules, safety practices, work procedures; meet deadlines; punctuality and attendance standards, etc. The base pay range for this position is 1700.19/weekly. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on 12/31/2026. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a “Sponsor”). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

About Seurat Seurat is transforming manufacturing for people and our planet by delivering a scalable additive manufacturing solution to fundamentally change how products are made. Seurat's proprietary Area Printing process, developed at Lawrence Livermore National Labs (LLNL), allows metal components to be manufactured at price points and quality levels that compete directly with conventional manufacturing techniques, enabling the reshoring of supply chains and promoting the decarbonization of industry. Seurat has raised over $180M and is backed by leading venture partners like Capricorn, NVentures (NVIDIA), True Ventures, General Motors Ventures, Denso, Porsche SE, SIP global partners, Honda, Xerox Ventures/Myriad Venture Partners, Cubit Capital, Siemens Energy, and Maniv Mobility. We are currently seeking a skilled CNC Machinist to add to our team. Job Responsibilities: Operate the CNC machine daily, including fixturing, running programs, and maintenance. Use CAD/CAM software to program 3-axis milling machines to machine complex metallicstructures and components. 4th and 5th Axis experience are a bonus. Design complex fixturing. Select tooling and maintain the tool library. Support the Applications Team (R&D) with DFM (design for manufacturing). Assist with the procurement of additional milling/manufacturing equipment. Operate auxiliary manufacturing equipment (bandsaw, furnace, media blast, etc.) while maintaining the shop in a clean and organized condition. Qualifications: Required 10+ years of combined experience operating and programming CNC machinery Strong verbal and written communication skills. Work effectively with cross-functional and multidisciplinary team environment. Travel up to 10%. Preferred Associate degree or above in engineering disciplines. Experience with a variety of materials (aluminum, stainless steels, titanium and nickel-based alloys, etc.) Experience with Autodesk Fusion/Solidworks CAM Experience in machining metal additive-manufactured parts Experience with Haas Equipment Experience of working in commercial metal AM manufacturing facilities (service bureaus, manufacturing divisions, laboratories, etc.) is strongly preferred. Massachusetts Salary Range Salary Range$78,000-$90,000 USD Seurat Technologies is an Equal Opportunity Employer that values employees with a broad cross-cultural perspective. We strive to create an inclusive environment, empower employees and embrace diversity. We encourage everyone to respond. All applicants will receive fair and impartial treatment without regard to race, color, religion, sex, national origin, ancestry, citizenship status, age, legally protected physical or mental disability, protected veteran status, status in the U.S. uniformed services, sexual orientation, gender identity or expression, marital status, genetic information or on any other basis which is protected under applicable federal, state or local law.

The CNC Machinist will be responsible for operation of CNC machining centers in a high-volume manufacturing environment. The technician may be asked to support other processes or production lines as demand and production schedules dictate. 2 nd Shift - Mon - Fri, 3:00pm - 11:30pm Essential Duties and Responsibilities: Develop and maintain strong, internal working relationships across ConforMIS. Understand the objectives, responsibilities, and mission of the Production department and works towards those goals. Prioritize and plan work activities; adapt for changing conditions. Operation and light maintenance of CNC machining centers and associated tooling. Hand deburring of metal medical implants after machining. Perform in-process inspection of CNC machined parts. Perform timely and accurate transactions of workflow in ERP system. Maintain CNC machine spare parts and consumable tooling. Assist in the investigation and implementation of corrective actions on product and process failures. Comply with all company policies and procedures including safety regulations, personal protective equipment requirements, Standard Operating Procedures, Work Instructions and Good Manufacturing Procedures. Interface with vendors to seek solutions for equipment repairs and refurbishment. Responsible for upkeep of manufacturing areas and provide a clean and safe work environment. Review all manufacturing documentation, assembly, inspection, test, packaging procedures and provide feedback. Support engineering activities such as process validations and equipment qualifications. Other responsibilities as assigned. Qualifications: High school diploma or equivalent. Technical education preferred. 1-5 years of experience in a medical device and/or regulated environment. Demonstrated English reading and writing skills. Familiarity with ISO Standards and Good Manufacturing Practices. Familiarity with Oracle (or equivalent) ERP systems and Microsoft Office Applications. Skills, Abilities, Competencies Required: Excellent written and verbal communication skills. Able to work accurately in a fast-paced, hectic, ever-changing environment with strong attention to detail. Demonstrated ability to monitor own work to ensure quality, accuracy and thoroughness. Strong organizational, analytical and time-management skills. Able to self-motivate and work both independently and as part of a team. Experience with inspection equipment (calipers, micrometers, comparator). Experience with metal polishing and other post-machining processes. Experience operating and maintaining CNC machining centers. Experience in a lean manufacturing environment a plus. Manual dexterity and coordination to load and unload parts during machining operations. Ability to work in a fast-paced environment and multitask. Comfortable with change. Ability to work as part of a team as well as independently. Familiar with Geometric Dimensioning and Tolerancing. Familiar with general machining techniques and practices. ConforMIS is an Equal Opportunity Employer

Job Description Who you are: Do you have experience running horizontal and vertical CNC Milling machines? Candidates must be capable of setting up and running Mazak HCN-5000 Horizontal Milling Centers, Mazak 700, or equivalent equipment. What you will be doing: Set up horizontal and vertical milling machines (Mazak) and related equipment Working knowledge of Mazatrol Smooth G and Nexus controls required (will confirm during interview process) Knowledge of Fanuc Series 18i-M and 18i-MB controls a Plus. A working understanding of G & M Code functions. The ability to link multiple machining operations to each other Manage tool list, tooling offsets, pallet fixturing and related tooling within the cell Demonstrates a working knowledge of speeds and feeds and a working knowledge of cutting tools and their applications Work closely with the programing department to develop and insure proper milling machining techniques Read prints and process travelers without supervision Read and understand work instructions and maintenance procedures Knowledge of Inspection equipment to measure and record all dimensional features as required Follow the direction of the Cell lead and execute proven fabrication recipes as documented while highlighting any issues encountered Maintains area, equipment, and tooling in a neat and orderly condition, while always exercising good machining practices. Understand and adhere to ISO and Quality policies. Required to lift or move objects up-to 40 lbs. Other duties as required Our ideal candidate has: Ability to read and comprehend simple instructions, short correspondence, and memos in English. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations. High school diploma or general education degree (GED) Minimum 10 years combined CNC operator and set-up Must have a minimum of Five years' experience as a CNC set-up person. About our client: MP's client has found a niche in the contract manufacturing market. They thrive on projects that are too small for the big CMs, and too complex for everyone else. Their unique blend of complimentary operational groups yields a formula that drives customer loyalty. In 2023, 80% of our client's revenue came from customers that have been with them for more than 15 years. These partnerships are built on stringent requirements that have created a culture of Clean Precision Manufacturing. Our client is a leading contract manufacturer in the semiconductor capital equipment industry, specializing in CNC machining, precision fabrication, and cleanroom welding. They provide high-quality, custom-engineered solutions for global leaders in high-tech industries. Our commitment to innovation, quality, and customer satisfaction has positioned us as a trusted partner in advanced manufacturing. Additional information: 2nd shift, Monday-Thursday, 3:30 pm-2:00 am Pay rate: $25.00-$45.00 per hour We have added new equipment to our modern, clean, climate-controlled facility. Profit Sharing Bonus 401 (k)- 4% match Medical (75% paid by company) Dental Vision Health Savings Account (HAS) with company contribution Flexible Spending Plans (FSA) Time Off: Holidays (11), Sick Time & Vacation Time

We are seeking a skilled CNC Programmer to join our dynamic manufacturing team. The ideal candidate will have a strong mechanical background and experience in programming CNC machines to produce high-quality components. This role requires precision, attention to detail, and the ability to work collaboratively in a fast-paced environment. Duties Develop and optimize CNC programs for both Lathe and Milling machining operations, ensuring high accuracy and efficiency. Must have 3+ years of Mastercam 19 or up Set up and operate CNC machines, including lathes and milling machining equipment. Conduct inspections using coordinate measuring machines, micrometers, bore gauges, and other precision measuring tools to ensure product quality. Apply geometric dimensioning and tolerancing (GD&T) principles in programming and inspection tasks. Maintain tooling inventory and ensure all tools are calibrated and in good working condition. Fabricate components as needed while adhering to safety standards and best practices. Requirements Proven experience as a CNC Programmer in a manufacturing environment. Strong mechanical knowledge with the ability to read blueprints and technical drawings. Proficiency in CAD software for designing parts and tooling. Familiarity with electrical discharge machining (EDM) processes is a plus. Experience with tooling setup, maintenance, and optimization. Knowledge of coordinate measuring machines (CMM) for quality control purposes. Ability to use precision measuring instruments such as micrometers and bore gauges effectively. Excellent problem-solving skills with a keen attention to detail. Strong communication skills and the ability to work well within a team. If you are passionate about precision machining and possess the required skills, we invite you to apply for this exciting opportunity as a CNC Programmer. Job Type: Full-time Pay: $35.00 - $40.00 per hour Expected hours: 40 per week Benefits: 401(k) 401(k) 4% Match 401(k) matching Dental insurance Health insurance Life insurance Paid time off Referral program Retirement plan Vision insurance Schedule: 8-hour shift Day shift Monday to Friday Morning shift

Enjet Aero Malden manufactures precision sheet metal and machined turbine engine components. We offer competitive salaries based upon experience and generous benefits including medical, dental, 401k and paid vacation and holidays. Job Description We are looking for a motivated individual that can set up and run CNC vertical turning machines. Must have a complete knowledge of G & M codes along with the ability to edit programs. Proficiency with conversational controls a huge plus. Sheet metal machining, advanced CNC knowledge (no CNC operators), along with the ability to make decisions. A high level of B/P reading is required. Additional Information We offer competitive salaries based upon experience and generous benefits including medical, dental, 401k and paid vacation and holidays.

We're looking for a skilled CNC Machinist to join our team and work on high-precision components using multi-axis CNC lathes. If you take pride in clean setups, accurate parts, and keeping machines running at their best, this is a great fit. About the Role You'll handle full set-ups and daily operation on equipment including DECO 2000, Nakamura, STAR ST38, and SR20 with bar feeders. This role requires at least two years of set-up experience on multi-axis lathes. What You'll Do · Read and interpret customer prints, including geometric tolerances. · Perform first-piece and in-process inspections to ensure parts meet spec. · Make offsets, minor program edits, and tool changes as needed. · Perform basic machine maintenance and keep equipment running smoothly. · Set up bar feeders, collets, bushings, gang and power tools, drill stations, C-spindles, ejector pins, and back-working tools. · Edit programs and understand G-codes, M-codes, and tool movements. · Support efficient production and maintain quality throughout each run. Preferred Skills · Toolmaking · Ability to make or modify tools and drills. · Strong understanding of tooling geometry. What We're Looking For · 2+ years of multi-axis CNC lathe set-up experience · Solid print-reading and inspection abilities · Strong attention to detail and pride in producing quality work · Someone who likes staying productive and keeping machines dialed in

Job Description **What makes us strong? **Our employees in 50 countries worldwide - all working with passion to enable high-tech applications with our strong metals: tungsten and molybdenum. At our Plansee site in Franklin, USA, we specialize in transforming semi-finished molybdenum and tungsten products into complex components-leveraging decades of precision manufacturing and engineering excellence. Join a highly motivated team in Franklin, USA, where local expertise meets the global knowledge and values of the Plansee Group. Plansee USA is looking for a skilled CNC Machinist to join the 2nd Shift team! Responsibilities Studies work orders, blueprints, engineering plans, materials, specifications, reference planes, locations of surfaces and machining parameters, interpreting geometric dimensions and tolerances (GD&T). Operates primary and high-end machinery including set-up and complete program understanding with editing ability to produce complex, non-routine parts and components. Perform assignments involving machining of surfaces at unusual or compound angles; items that require different or compound indexing; multiple lead and various other non-standard screw threads; helical or other types of gears, worm threads; or surfaces closely interrelated dimensions or complex configurations that usually require special adaption or extension of the use of conventional machine tools. Perform machining operations on CNC machine tools including shop floor programming and using such procedures as multiple setups, in place machining of fixtures, debugging first run programs and making or suggesting changes to machine tool program. Qualifications Seven to 10 years machining experience in a manufacturing production environment. Advanced knowledge of concepts, practices and procedures involving CNC machines. Familiarity with lean manufacturing and continuous improvement techniques. Ability to read and interpret machining and fabrication drawings. Solid math, geometry and trigonometry skills and understanding GD&T. Strong attention to detail, ability to communicate effectively and work in a team environment. Benefits 15% Shift Differential; $1k Sign on Bonus Medical - 90% paid for with 100% reimbursement on deductible Dental Vision Flexible spending accounts Company paid life and disability insurance 401 K w/ company match Time off Benefits Pay range: $33-$40 + bonus plan And much more! Equal Employment Opportunity We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity and/or expression, status as a veteran, and basis of disability or any other federal, state or local protected class. Recruitment Team | *********************** Plansee USA LLC You should be proficient in: GD&T Equipment Troubleshooting CNC Tooling Troubleshooting Skills CNC Programming CNC Machine Repair CNC Machine Installation Machine Setups for Production Runs Manual Machining Skills Blueprint Reading Machines & technologies you'll use: CNC Mill (3-4 axis VMC) (Fanuc, Bridgeport, ProtoTRAK, Okuma, Dmg Mori Seiki) CNC Lathe (2-4 axis) (Okuma, Nakamura) CNC Swiss Lathe CNC Mill (5+ axis VMC) (Okuma) CNC Lathe (5+ axis) (Okuma)

Machines parts to customer specifications doing in-process part inspections. Lead will oversee and schedule turning or milling area; troubleshoot; program and work with milling or turning lead on first piece inspections. Essential Duties and Responsibilities - Assist in Mfg. of parts which require strict customer specifications. - Machine (turning/lathe/mill/mill-turn) product to customer specifications/print using CNC programs. Lead will program, perform upgrades and check outcomes to changes. - Deburr machined parts per requirements. - Detect, segregate and report non-conforming material and foreign object debris (FOD). - Control of non-conforming material along with understanding the use of documentation reporting such issue. - Maintain part identification and lot segregation. - Inspect work as necessary to prints callouts. - Accurately report any damaged/nonconforming parts to team leaders/Mgr. - Assist with packaging and shipping parts. - Properly fill out documentation/job travelers accurately. - Compliance with AS9100D and customer-specific requirements. - Report any safety issues found in performance of normal job activities. Competencies - Print Reading - Basic understanding of geometric dimensioning and tolerancing is a plus. - Multitasking (i.e. inspect/measure parts while other parts are running, running more than one machine at a time) - Dexterity - Endurance (standing on job for long-periods of time) - Attention to detail - Cleanliness and organization - Focus on safety/safe work track-record - Reading/understanding gages and other measurement devices (such as calipers and micrometers) - Team player/doing things for the right reasons within the confines of an AS9100 environment Required Knowledge and Skills - Geometric dimensioning and tolerance understanding. - Brown and Sharpe Micro-Val CMM experience a plus. - Experience with CMM Manager software a plus. - Use of many types of inspection equipment, dial indicators, gage blocks, micrometers. - Good communication skills. - Good math skills - Familiar with AS9100 shop environment. Specific Training Required - Familiarity with Jet Machined Products inspection forms and record keeping practices. - AS9100 awareness. Education Required/Preferred - Vocational or non-vocational High School Graduate or GED Direct Supervisor Turning/milling lead and if lead the General Manager Physical/Mental Demands - Must be able to lift and move machined parts Work Environment - Clean and relatively quiet in most areas, hearing protection required in some areas - Eye hazard potential, eye protection required for certain operations Frequency of Overtime/Extended Hours Occasional overtime, workload dependent.

Job DescriptionBenefits: 401(k) matching Competitive salary Dental insurance Free uniforms Health insurance Paid time off Vision insurance Training & development Precision Aerospace Manufacturing | North Shore, MA | 4-Day Work Week + Benefits Join a high-performance aerospace manufacturer on the North Shore that builds mission-critical engine components for the Department of Defense and major OEMs. We're a small business with big impactand were hiring a Set-Up CNC Lathe Machinist to help us deliver quality, precision, and reliability at every turn. If youre a self-driven machinist who takes pride in your craftsmanship and thrives in a no-nonsense, quality-first environment, this is your opportunity to join a team thats committed to excellence. Position Details - Schedule: MondayThursday, 10-hour shifts (4-day work week) - Optional Overtime: Fridays available based on workload - Location: Groveland, MA - Status: Full-time, on-site Key Responsibilities - Set up and operate CNC lathes to machine complex aerospace parts - Select tooling, adjust offsets, and make minor program edits - Inspect parts with precision measuring tools (micrometers, indicators, bar gages, etc.) - Maintain clean and organized workstations aligned with safety standards - Collaborate with production and quality teams to ensure high output and zero-defect delivery Preferred Qualifications - Minimum 3 years CNC lathe setup experience in a precision manufacturing environment - Familiarity with Fanuc controls or similar G-code-based systems - Experience holding tolerances - Strong mechanical aptitude and detail orientation What We Offer - 401(k) with generous company match - Health and dental insurance - Company-sponsored life insurance - Paid time off - Stable 4-day work week (Fridays off unless you want OT) - Clean, climate-controlled, well-equipped shop environment Ready to produce precision parts with a purpose? Apply now and become part of a team that machines the future of flight.

Job Description Schedule: Full-Time Pay Range: $28-$36/hr (DOE) About the Role We're seeking an experienced CNC Programmer/Machinist to join a growing precision manufacturing team on the North Shore. This role supports production by programming, setting up, and operating CNC machines to produce high-quality parts for aerospace, medical, and industrial applications. Key Responsibilities Create, edit, and optimize CNC programs (G-code) for mills and/or lathes Set up machines, select tooling, and run first-piece inspections Operate CNC machinery to produce components to tight tolerances Read and interpret blueprints, drawings, and GD&T Perform quality checks using calipers, micrometers, and other precision instruments Troubleshoot machining issues and make adjustments as needed Maintain equipment and follow shop safety standards Qualifications 3+ years CNC machining experience (mills, lathes, or both) Strong G-code programming or CAM software experience (Mastercam, Fusion 360, etc.) Ability to read engineering drawings and use precision measuring tools Strong mechanical aptitude and problem-solving skills Experience with tight-tolerance aerospace/medical parts a plus Salary info: $28 - $34 / hr

Job Purpose As a CNC Machinist at VulcanForms you will operate CNC Lathe and/or Mill Machines to support manufacturing based on skillset and shop demand. VulcanForms operates in an environmentally controlled, state-of-the-art facility committed to producing quality parts for our clients. We manufacture products for several industries, including aerospace, military and defense, satellite, and medical devices. Please note that the CNC Machinist position is shift-based and this is during our 1st shift. Key Responsibilities Ability to operate a CNC lathe (including work holding, kitting of tools, touching off of tools/establishing offsets, reading of manufacturing drawings, and first article buy-off) on FANUC, Yasnac, Mitsubishi, and controls. Ability to operate a CNC 3, 4 or 5-axis Mill (including work holding, kitting of tools, touching off of tools/establishing offsets, reading manufacturing drawings, and first article buy-off) on Fanuc, Yasnac, Brother, and Heidenhain controls Experience with utilizing a pre-setter offline for tool offsets is a plus. Experience with quick-change tooling is a plus. Operate, set up, and edit programs on the machines within the department. In addition to running machines, the Machinist will periodically inspect parts during production to monitor for consistent dimensional and visual quality. Responsible for continuously monitoring equipment and tooling. In the event of a breakdown or other event that would disrupt the process. Follow the instructions on the Process sheet, Drawings, and/or Programs. Support training of more junior team members on all aspects of machining. Helps others identify issues and troubleshoot their work. Interface/communicate with Quality, Engineering, and other team members. Maintains the work area and equipment clean and orderly and follows prescribed safety regulations. Qualifications 4+ years of experience with 3, 4, and 5-axis CNC Milling Centers, 2-axis and multi axis, live tooling lathes, experience with the controls listed in the Key Accountabilities section above. Ability to read Blueprints and have a good understanding of GD&T Ability to work in a team environment Adhere to and enforce the company's health & safety policies and procedures Adhere to and enforce the company's quality policies and procedures Good hand/eye coordination Preferred Graduate of Advanced Machine Technology Course. Knowledge of 5S/6S. VulcanForms offers a competitive salary and equity package. Actual compensation is based on factors such as the candidate's skills, qualifications, and experience. In addition, VulcanForms provides comprehensive benefits including medical, dental, vision, and life insurance; generous paid time off; and a 401(k) plan with company match. The hourly pay range for this position varies by level; final level and compensation will be determined based on a candidate's experience. Level 1: $20.00 - $27.50 Level 2: $24.48 - $33.66 Level 3: $28.00 - $38.50 Level 4: $30.00 - $41.25

The CNC Machinist will be responsible for production and post-processing of medical devices. Common secondary processes include cutting, deburring, media blasting, polishing, filing, cleaning, and packaging. This role will be focused on operating machine shop equipment including but not limited to CNC Mills, Turning centers, Wire EDMs and Bandsaws. 2nd Shift, Monday - Friday, 3 PM - 11:30 PM Essential Duties and Responsibilities Develop and maintain strong internal working relationships across restor3d. Understand the objectives, responsibilities, and mission of the Sterility & Lot Release department and work towards those goals. Prioritize and plan work activities; adapt for changing conditions. Operation of multi axis machines (3-axis mill/turn, 5-axis mill/turn and Wire EDM). Setting of tooling and making tool offsets. Run programs developed on CAM software such as Mastercam. Interpret engineering specifications and drawings. Perform equipment maintenance. Support transfer activities requiring CNC equipment. Ensure high quality production in adherence with industry standards. Create sustainable manufacturing processes, programs, and fixtures. Follow all appropriate safety precautions, including usage of PPE and maintaining facility cleanliness. Dimensional and visual inspection of manufactured goods as part of quality-controlled process. Collaborate with programmer and engineering to improve processes. Qualifications Highschool diploma or GED required. Associates or post-secondary education preferred. 3 years of CNC Mill or Lathe set up and operation. Minimum 4 years of machine shop experience. Proficiency with CAM and CAD software such as Mastercam and Solidworks. Strong attention to detail and mechanical aptitude. Ability to work in a regulated industry including adherence to good documentation practices and good quality practices. Strong visualization and analytical skills. Skills, Abilities, Competencies Required: Excellent written and verbal communication skills. Able to work accurately in a fast-paced, hectic, ever-changing environment with strong attention to detail. Demonstrated ability to monitor own work to ensure quality, accuracy, and thoroughness. Strong organizational, analytical, and time-management skills. Able to self-motivate and work both independently and as part of a team. Machine shop tooling such as cutters, bandsaws, and basic handheld tools . Working with CNC equipment such as Mill, EDM and lathe, furnaces, direct Metal Printers, polymeric 3D Printers, media blasting cabinets, testing frames, cleaning and inspection equipment. Position may involve handling of ultra-fine, medical grade, metallic powder, handling of other tooling, components, raw materials and waste material applicable to the manufacture of medical devices. Knowledge of respirator and fire-retardant PPE. Able to lift and carry up to 50 pounds. Operate while wearing protective equipment. Repetitive movements such as periods of standing, working with hands and tools, squatting, kneeling and moving up and down ladders.