Operations engineer jobs in Portland, ME - 142 jobs

Diodes Incorporated is seeking a full-time equipment engineer to join our talented manufacturing team. This position requires a flexible schedule and the willingness to work occasional overtime. You will be responsible for multiple activities with respect to future planning, project execution, maintenance and repair of semiconductor manufacturing equipment. These activities would include deliverables such as troubleshooting and repairs, continuous improvements to help with availability, cost savings and OEE. Good written skills for creating and updating activity checklists, corrective and preventative maintenance procedures, and specification updates, as well as good interpersonal skills to provide clear technician direction and training and present data to management. Must have good project execution acumen, strong semiconductor equipment experience and be comfortable working in a fast-paced manufacturing environment and taking ownership of equipment within your assigned area. Principle Duties and Responsibilities: Working hours: 40-hour work week, Monday through Friday. OT is expected in order to keep your assigned area running as smoothly as possible. Work is performed within a clean room environment that requires the wearing of a smock, hood, booties, latex gloves, and safety glasses. Requires the use of airline respirator. Requires occasional wearing of personal protective equipment including, but not limited to, aprons, gauntlets, and full-face masks. Requires lifting of objects that weigh up to 50 lbs. May require work with hazardous gases, chemicals, and high voltages. Troubleshoot and repair electromechanical systems. Troubleshoot and repair electro-pneumatic systems. Consistently directs one's own work at a high level and demonstrates advanced leadership skills for small teams and is sought out as a subject matter expert for assigned area. Follows procedures without deviation and update them as needed. Discusses repair and maintenance requirements with peers and balances work with available talent. Reviews tool histories for all area tools looking for common themes and proposes improvements / repairs and executes on them. Identifies abnormal tool conditions and execute corrective actions. Has clear technical knowledge of the equipment and its sub-systems within area assigned. Has process knowledge enough to understand recipes and the desired outcomes. Understands and uses SPC charts to identify failure modes. Responsible for the completion of all scheduled and unscheduled preventative maintenance and repair procedures in a timely, accurate, and safe manner within assigned area. A safety-minded approach is required: employees must be able to learn, understand and follow all safety documentation, specs and protocol, including LOTO. Must also be able to identify any/all safety concerns and regulatory violations in order to eliminate them. May possibly be cross trained in other areas as needed Knowledge, Skills and Abilities: Strong electrical/mechanical semiconductor knowledge. Ability to perform He-Leak checks of gas and vacuum systems. Comfort handling chemicals, including acids, bases, and solvents. Experience troubleshooting electrical issues. Experience troubleshooting vacuum systems. Ability to read electrical schematics Ability to use digital multimeters and voltage supplies. Ability to work well in a collaborative environment, and as part of a team. The flexibility to work outside of normal schedule, cross train, (learn more than one job or operation) and multi-task as needed. A BS in Engineering or relevant technical discipline, or Military Equivalent. Diodes Incorporated (Nasdaq: DIOD), a Standard and Poor'sSmallCap 600 and Russell 3000 Index company, is a leading global manufacturer and supplier of high-quality application specific standard products within the broad discrete, logic, and analog semiconductor markets. Diodes serves the consumer electronics, computing, communications, industrial, and automotive markets. We offer a competitive benefits package to include medical, dental, vision, FSA, 401k with company match, company paid Short Term and Long-Term disability and standard life insurance policy. We also provide paid time off and an employee wellness program.

Colby Co. is a midsize multi-discipline design firm specializing in mechanical, electrical, fire protection, structural, civil and architecture. Seventy employees strong, Colby Co. is noted for its commitment to technical and service excellence in a fun, flexible, rigorous work environment. Located in the vibrant small city of Portland, Maine, Colby Co. offers a balance of opportunities for working and living well. Colby Co. has been named to the “Best Places to Work in Maine” list consecutively for the last seven years, and as an “Emerging Professional Friendly Firm” by the New England Chapter of AIA for the last three years. We are seeking a Mechanical Engineer with 5-10 years of building and industrial experience in a consulting engineering design firm setting. We are looking for an engineer who can perform a broad range of mechanical engineering designs including HVAC systems, industrial systems (pumps, heat exchangers, piping, etc.), plumbing systems, and system controls. Experience with energy audits and sustainable design is a plus. The successful candidate will bring a deep, successful track record of design, quality control and construction administration experience. In addition to an outstanding technical skillset, they will be a quick, flexible thinker and problem-solver who is accustomed to working in fluid teams on tight deadlines. This position is a part of the Mechanical Engineering Department which is comprised of mechanical, plumbing, and controls engineers. You will have the opportunity to work on multidisciplinary design teams as many of our projects encompass more than one discipline. Projects range in size from $50,000 to $90M in construction value for State, Federal, Industrial and Commercial clients. Desired traits: PE License or ability to sit for PE Exam Proficiency in AutoCAD and/or Revit a Plus Experience with Trane Trace 700 and/or DOE 2 a plus Sustainable design experience a plus In addition to a comprehensive insurance and retirement benefits package, Colby Co. offers two paid volunteer days a year, paid educational reimbursement, summer hours, paid time off (PTO), flex time, ability to work remotely, and company outings. Colby Co. is an Equal Employment Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Full-time Description SMRT is a multi-disciplinary, full-service architecture and engineering firm specializing in high-performing, complex, and sustainable environments. We are a collaborative team united by a shared vision, seeking innovative professionals ready to design for what's next. We solve complex problems with smart, inventive solutions. Collaboration drives our success, allowing us to create exceptional spaces and tackle challenges head-on. We're committed to partnership with clients and colleagues, if you're curious, creative, and committed to sustainable design, you'll fit right in. Join SMRT's Mechanical Engineering group and be part of our dynamic team Collaborate through the integrated design process with experts across architecture, structural, electrical, site, and interiors to shape innovative solutions from start to finish. Dive into projects covering HVAC, plumbing, fire protection, process, and commissioning, making a direct impact on carbon reduction, resiliency, and user wellness. Beyond design, engage in exciting pursuits and business development, working alongside top-of-their-game professionals to deliver cutting-edge, sustainable solutions. What our Mechanical Engineers Do: Function as Engineer of Record for mechanical scope. Develop schematic level information and document project work in accordance with codes, SMRT, and industry standards. Supervise quality and efficient production of contract documents. Perform modeling and calculations. Research specifications and materials. Review and respond to contractor submittals and RFIs. Visit project sites for existing conditions assessments, construction progress observation, and project closeout. Coordinate and communicate project workloads with discipline leaders and other members of the mechanical group. Coordinate work with other in-house disciplines as applicable. Work under supervision of discipline leaders. May function as a Project Manager depending on experience. Skills you need to be successful in this role: Ability to work independently and as part of a team. Knowledge of national, state, and local codes as they pertain to mechanical systems. Ability to relate to building constructio n, their components in three dimensions, and interact with other disciplines to coordinate all document efforts. Understanding of materials, systems, and commercial building construction. Strong interpersonal and written communication skills. Demonstrated ability to meet multiple deadlines on multiple projects. Experience working with HVAC software such as Trane Trace. Working knowledge of Microsoft Office. What WE have to offer: Flexible work environment. Paid Time Off (Vacation, Sick, Holiday, Volunteer Hours) starting at 6 weeks total. Healthcare, Dental, and Life Insurance benefits. Immediate start 401(K) retirement savings plan with an automatic company contribution. Education and training assistance. Reimbursement for licensure. SMRT is an equal opportunity employer. We consider applicants for all positions without regard to race, color, religion, sex/gender identity, sexual orientation, national origin, age, marital or veteran status, the presence of a medical condition or disability or any other legally protected status. Requirements Minimum of 5 years of experience designing mechanical systems. P.E. license preferred. Bachelor's Degree in Mechanical Engineering or related field preferred.

Harriman is growing! We are looking for a Mechanical Engineer to join our team and join our full-service practice. If you are looking for a firm that understands the importance of work-life balance, enjoys working with lots of other people, and can work independently in our hybrid-work environment, then this is an opportunity that you need to look into! Working at Harriman, you will be immersed in our mission to design relevant and innovative solutions to meet human needs. Our work is challenging, creative, and is based on the belief our designs are the best when we collaborate together. Duties and Responsibilities: A licensed engineer will be expected to act independently regarding engineering methods and calculations, applying sound and diverse knowledge of engineering principles and practices in a broad array of assignments. At level 1, a licensed engineer is expected to plan and conduct work including evaluation, selection, and design of mechanical equipment and components. They are expected to assess problems and answer technical questions independently in front of clients, including providing guidance to and review the work of unlicensed engineers and designers. They are also expected to perform project management duties on small projects. Requirements Minimum 4 years of experience. Familiar with the principles of engineering, knowledge of advanced math, physics, and mechanical science applicable to the field. Undergrad Degree (4 years minimum) in Mechanical Engineering (other engineering degrees to be considered on a case-by-case basis). Has passed the Professional Engineers exam. Able to complete small and medium sized projects with minimal supervision. Proficient with the tools required to achieve project completion (ie software, reference documents, calculations, and contacts). Able to work collaboratively in a team environment. Software Proficiencies: Proficient with Revit and/or AutoCAD. Proficient with Load Calculation software, Trane Trace 700/3D Proficient with PDF Editing software such as Adobe or Bluebeam. Proficient with Newforma Project Center. Proficient with Deltek Vision. Capable of utilizing additional software as needed to perform complex calculations. Microsoft Office Suite Zoom/Teams/Video Conferencing Software What will set you apart In addition to the required technical skills, we must work together collaboratively in a team environment to succeed. Some general expectations that are required for all staff members include, but are not limited to, the following: Strong work ethic Positive attitude Be a team player Be flexible, adaptable, and open to new ideas Actively seek out clarification via the expertise of colleagues when unsure. Be respectful of others and their opinions and ideas Manage your efforts efficiently and effectively to complete tasks on time and with limited impact on co-worker's schedules Be prompt to appointments and meetings out of the office as well as in-house Inform studio leader of PTO, or unexpected time away from the office and record in studio PTO Calendar Participate in meetings, trainings, and activities such as project team and committee meetings, all-office meetings (such as the Monthly Harriman Huddle), and studio-specific meetings. Ability to accept and learn from criticism Avoid conflicts of interest Market oneself and the company always by conducting oneself professionally: we all represent Harriman! Communicate, communicate, communicate! Benefits: We offer completive salaries and a full benefits package including medical, dental, 401K program, hybrid work schedule, gym reimbursement, and a friendly, collaborative work environment. Harriman is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability or veteran status.

**Change the world. Love your job.** In your first year with TI, you will participate in the Career Accelerator Program (CAP), which provides professional and technical training and resources to accelerate your ramp into TI, and set you up for long-term career success. Within this program, we also offer function-specific technical training and on-the-job learning opportunities that will encourage you to solve problems through a variety of hands-on, meaningful experiences from your very first day on the job. The TMG Development program is a 12-month program for new college graduates in the TMG organization. Do you want to work for an organization that values your opinion? Do you want to work for an organization where you can play a pivotal role in several different areas? As a Texas Instruments Equipment Engineer, you will have the opportunity to work in a vibrant and dynamic team-oriented environment. **Responsibilities include:** + Evaluate, select, and order equipment that is most appropriate and cost effective for the manufacture of company products + Oversee the installation, modification, upgrade and maintenance of manufacturing equipment + Keep current on equipment manufacturers' technical notices, upgrades and safety issues + Study equipment performance and reliability + Establish programs and solutions for increasing uptime and for equipment problems that affect the manufacturing process + Provide technical support to the manufacturing equipment repair and process engineering organizations + Define and write preventative maintenance schedules **Why TI?** + Engineer your future. We empower our employees to truly own their career and development. Come collaborate with some of the smartest people in the world to shape the future of electronics. + We're different by design. Diverse backgrounds and perspectives are what push innovation forward and what make TI stronger. We value each and every voice, and look forward to hearing yours. Meet the people of TI (*************************************** UI/CandidateExperience/en/sites/CX/pages/4012) + Benefits that benefit you. We offer competitive pay and benefits designed to help you and your family live your best life. Your well-being is important to us. **About Texas Instruments** Texas Instruments Incorporated (Nasdaq: TXN) is a global semiconductor company that designs, manufactures and sells analog and embedded processing chips for markets such as industrial, automotive, personal electronics, communications equipment and enterprise systems. At our core, we have a passion to create a better world by making electronics more affordable through semiconductors. This passion is alive today as each generation of innovation builds upon the last to make our technology more reliable, more affordable and lower power, making it possible for semiconductors to go into electronics everywhere. Learn more at TI.com . Texas Instruments is an equal opportunity employer and supports a diverse, inclusive work environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, creed, disability, genetic information, national origin, gender, gender identity and expression, age, sexual orientation, marital status, veteran status, or any other characteristic protected by federal, state, or local laws. If you are interested in this position, please apply to this requisition. **Minimum requirements:** + Bachelors degree in Electrical Engineering, Electrical & Computer Engineering, Chemical Engineering, Mechanical Engineering, Materials Science Engineering, Physics or related engineering degree + Cumulative 3.0/4.0 GPA, or higher **Preferred qualifications:** + Knowledge of AMAT PVD and/or AMAT TxZ chambers equipment + Knowledge of PVD, CVD, high vacuum and/or ultra high vacuum + Knowledge of other equipment (e.g., AMAT, Veeco, TEL, Novellus, and/or ASM) + Understanding of tool monitoring and interdiction software, and equipment maintenance and documentation + Strong verbal and written communication skills + Demonstrated strong analytical, critical thinking and problem solving skills + Ability to work in teams and collaborate effectively with people in different functions + Ability to take the initiative and drive for results + Strong time management skills that enable on-time project delivery + Ability to work effectively in an interrupt-driven, fast-paced and rapidly changing environment + Demonstrated ability to build strong, influential relationships **ECL/GTC Required:** Yes

Oversee new common system and infrastructure installation / capacity augment projects. Monthly common system capacity reporting for assigned facilities. Day to day maintenance and PMs of assigned FirstLight facilities. Subject matter and special task per management assignment. This role has combined responsibility for data center process and compliance activities. Responsible for Physical security at the data center - enroll new customer, escort customers, shipping/receiving, Generating reports, Data Entry. Responsibilities: Responsible for Physical security at the data center - enroll new customer, escort customers, shipping/receiving, Generating reports, Data Entry. Coordination and oversight of installation, repair, and routine maintenance for each assigned facilities asset. Coordinate internal resources, contractors/vendors for existing facilities and new construction, cabinet installations and service cross connections. Monthly common system capacity reporting for assigned facilities. SP Marketplace documentation of All Facilities / assets assigned. ESSENTIAL DUTIES AND RESPONSIBILITIES: Maintenance and installation activities on major network infrastructure components. Works with Network Design Engineering to facilitate clean SOW packages, Understands power and grounding, HVAC / UPS architecture fundamentals. Basic understanding of test equipment i.e., Power/grounding / HVAC / UPS, all related / required testing equipment to conduct and troubleshoot the FirstLight infrastructure. Network Facilities Technician must understand access procedures for all relevant sites under their area of operation. . Preventative maintenance / reporting for infrastructure components i.e., HVAC, Emergency Generators, transfer switching, remote gen set operation, maintenance, and interface connections. Network Facilities Engineer has oversight of contract labor for end-to-end installation, test, turn-up, and maintenance of all infrastructure and common systems related projects. Participate in On-Call Rotation. Be available as Essential Personnel in emergency scenarios. When necessary, assist with Field Operations installation tasks. Completes special projects and other duties as assigned. Security services at the Data Center - access control, Data Entry, Shipping Receiving, Customer escorts and other items as needed\7 To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the qualifications, knowledge, skill and/or ability required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Basic understanding of CLR's, Floor Plan diagrams, One Line power diagrams Work under a Service order workflow from internal systems Inventory control protocols, (i.e., use of PIC list / POR process in the accounting software SharePoint access / use of departmental, engineering and NOC related pages Troubleshooting process (i.e., point to point analysis) Basic understanding of AC / DC power architecture and operational fundamentals Basic Utility and Emergency Power Architecture and operational fundamentals Basic Field Test equipment operation (i.e., Power Measurement) Enhances department and organization reputation by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments. Position Expectations: Overall common systems operations and maintenance of FirstLight facilities, accommodating customers, contractors, and internal colleagues. Coordinate projects with Facilities Director, department managers and project managers. The duties require strict adherence to budgets, adherence to a formal bid process including but not limited to Scope development, bid site walks, Bid open and close scheduling. This position is responsible for management of multiple contract service providers and projects simultaneously. WORK ENVIRONMENT / PHYSICAL DEMANDS: The work environment characteristics and physical demands described are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee frequently is required to walk, sit, use hands and fingers, handle objects or controls, talk and hear, stand, and reach with hands and arms. The employee must occasionally lift and/or move up to 100 pounds, pull cables, and use various hand tools. Position requires frequent entry into structures with stairs, ladders, and other vertical obstacles. Travel to critical infrastructure locations may be required. Occasional overnight travel may be required. Employee will be required to work and drive, in all-weather conditions. The noise level in the work environment is usually moderate but may occasionally have noise from power equipment and tools. *** Common Systems definition examples: Power / Water / Sewage utilities Primary Power systems AC - DC Secondary (Emergency) Power systems; Generators /ATS /UPS systems Battery Plants / Strings All power interface systems i.e. switchboards, distribution architecture Fuel storage integrity and monitoring Site telemetry and sensor installation / maintenance HVAC systems HVAC controls systems Structural Infrastructure - i.e. Cable Ladder, Fiber Management, Enclosure / Equipment Rack infrastructure Floors, roof, Wall structure / penetration integrity Site Maintenance, Interior facility maintenance / Exterior site maintenance including but not limited to Plowing and mowing, access points and security, structural integrity. Preventative Maintenance contracts and schedules for all site critical system assets Physical integrity of Intrusion, Access and Fire alarm systems About FirstLight FirstLight provides fiber-optic data, Internet, data center, cloud and voice services to enterprise and carrier customers throughout the Northeast connecting more than 13,000 locations in service with more than 125,000 locations serviceable by our more than 25,000-route mile network. FirstLight offers a robust suite of advanced telecommunications products featuring a comprehensive portfolio of high bandwidth connectivity solutions including Ethernet, wavelength, and dark fiber services as well as dedicated Internet access solutions, data center, cloud and voice services. FirstLight's clientele includes national cellular providers and wireline carriers and many leading enterprises, spanning high tech manufacturing and research, hospitals and healthcare, banking and financial, secondary education, colleges and universities, and local and state governments. FirstLight is committed to cultivating and preserving a culture of diversity, and inclusion. We recognize that our differences are assets that strengthen us as a team, and FirstLight is committed to fostering an environment where everyone feels welcomed, valued, respected and recognized. FirstLight Fiber is an equal opportunity employer. In accordance with state and federal laws, FirstLight's equal opportunity policy is that all applicants and employees are treated equally by the company with respect to employment opportunities, regardless of race, color, religion, sex, sexual orientation, disability, or veteran status or veteran disability.

Sabre Yachts is a leading manufacturer in building Downeast style motor yachts, based in Raymond, Maine since 1970. Sabre has exceptional world-class craftsmen and women in the boat building industry who craft beautiful luxury yachts. Product Engineer Sabre Yachts Raymond, ME | Full-Time | On-Site Position Summary Sabre Yachts seeks a skilled Product Engineer to support the full lifecycle of our premium yachts, from concept development through production and customer delivery. This role serves as a key technical authority, ensuring designs meet our standards for quality, performance, manufacturability, and serviceability. The Product Engineer works cross-functionally with design, production, purchasing, and customer service to deliver engineering solutions that uphold our brand values and meet cost, schedule, and regulatory requirements. Responsibilities Engineering Support development of new and existing models from concept through production release. Create and maintain 2D/3D CAD models, drawings, assemblies, BOMs, and change notices. Collaborate with production to resolve build issues and improve manufacturability. Coordinate prototype builds and sea trials; capture feedback and implement improvements. Provide technical support for warranty, service, and field-related issues. Problem Solving & Improvement Identify and document design or production issues. Apply root-cause analysis and lead cross-functional problem-solving efforts. Implement corrective and preventive actions to improve quality and reliability. Support continuous improvement across models, systems, and processes. Administrative & Facility Support Maintain accurate drawings, reports, and engineering documentation. Manage multiple projects and meet schedule commitments. Support document control, design standards, and engineering systems. Maintain a clean, safe, and organized work area and assist with facility improvement efforts. Qualifications A degree in engineering or industrial design is preferred; however, equivalent technical training or production-focused engineering experience is also accepted. 3+ years of experience in boatbuilding or manufacturing engineering preferred. Proficiency in CAD software (SolidEdge, Rhino, AutoCAD, or equivalent). Strong understanding of marine systems, composites, and production processes. Excellent communication, analytical, and problem-solving skills. Ability to manage multiple priorities in a fast-paced production environment. ABYC Certification or PE licensure is a plus. Additional Requirements Ability to interpret engineering drawings, specifications, and regulatory standards. Strong math and computer skills, including spreadsheets and modeling tools. Ability to maintain confidentiality regarding proprietary product information. The Product Engineer works cross-functionally with design, production, quality control, purchasing, sales & marketing, and customer service. Works under general supervision with expected independent judgment on technical matters.

About the Opportunity The Sr Machine Learning (ML) Engineer applies expertise in deploying and scaling AI pipelines across at least one major cloud platform (AWS, GCP, or Azure). The Engineer will collaborate with our Data Scientists to architect, deploy, and maintain production-grade AI solutions. As part of the AI Solutions Hub, the Engineer will architect, engineer, and deploy AI pipelines that push technological boundaries for our clients. The Engineer will tackle complex challenges at the intersection of Large Language Models, Computer Vision, and Predictive Analytics while ensuring production reliability and scalability. The Engineer combines technical excellence with strong collaboration skills to help our clients realize transformative AI projects. MINIMUM QUALFICIATIONS * Expert knowledge of at least one major cloud platform (AWS, GCP, or Azure) * Strong programming skills in Python and infrastructure-as-code tools * Proficient with containerization (Docker) and orchestration (Kubernetes) * Knowledge and skills required for this job are normally obtained through a bachelor's degree at at least 3+ years of experience in software engineering with a focus on cloud infrastructure plus 1 more years of hands-on experience deploying ML models to production JOB DUTIES 1) Model Development & Deployment * Design and implement scalable model serving architectures for both GenAI (LLMs, diffusion models) and traditional ML models * Build and maintain real-time and batch inference pipelines with high availability and fault tolerance * Optimize AI workloads for performance, cost-efficiency, and low-latency inference * Develop distributed model training and inference architectures leveraging GPU-based compute resources * Implement server-less and containerized solutions using Docker, Kubernetes, and cloud-native services 2) MLOps Pipeline Development * Architect end-to-end MLOps pipelines covering training, validation, deployment, and monitoring * Design and implement model validation and monitoring systems with alerts * Automate data pipelines for feature engineering, model retraining, and data versioning using cloud data services (e.g., Redshift, BigQuery, Synapse) * Implement monitoring for model drift, data drift, and service reliability 3) DevOps & Automation * Implement CI/CD pipelines for ML model deployment using GitHub Actions, Jenkins, or equivalent * Develop infrastructure-as-code templates for reproducible environment setup * Design and build scalable cloud infrastructure using compute, storage, and database services (e.g., EC2, Cloud Storage, Cosmos DB) * Ensure high availability, auto-scaling, and fault tolerance of AI services in production 4) Security & Compliance * Design and maintain IAM roles and permissions for ML workflows * Ensure compliance with data privacy requirements in model serving * Implement encryption and key management for model artifacts and sensitive data * Set up secure access controls using cloud-native security services (e.g., KMS, Cloud KMS, Key Vault) Position Type Research Additional Information Northeastern University considers factors such as candidate work experience, education and skills when extending an offer. Northeastern has a comprehensive benefits package for benefit eligible employees. This includes medical, vision, dental, paid time off, tuition assistance, wellness & life, retirement- as well as commuting & transportation. Visit ************************************* for more information. All qualified applicants are encouraged to apply and will receive consideration for employment without regard to race, religion, color, national origin, age, sex, sexual orientation, disability status, or any other characteristic protected by applicable law. Compensation Grade/Pay Type: 113S Expected Hiring Range: $112,180.00 - $162,662.50 With the pay range(s) shown above, the starting salary will depend on several factors, which may include your education, experience, location, knowledge and expertise, and skills as well as a pay comparison to similarly-situated employees already in the role. Salary ranges are reviewed regularly and are subject to change.

About Us: Machine Solutions is the premier provider of advanced equipment and services for the medical device, biopharmaceutical, and blood- and plasma-collection industries. We support our customers' needs and growth by delivering quality and value through a wide breadth of products. Machine Solutions provides proprietary mechanical solutions to a variety of complex process, testing and device design challenges. Our equipment has become the industry standard for stent crimping, balloon catheter pleating and folding, catheter braiding and medical device manufacturing applications. As a pioneer in radio frequency technology, the company has continued to develop advancing technology for thermal forming, molding and welding plastic for medical manufacturing, biopharmaceutical, and blood- and plasma-processing applications. Our experienced team of engineers has been instrumental in automating manual processes that enable our customers to increase production volumes and profit margins, and we believe in providing a superior customer experience by designating resources to a dedicated aftermarket team that is always ready to provide technical service and process support. Machine Solutions is privately owned by BW Forsyth Partners, a Barry-Wehmiller company. BW Forsyth Partners is the investment arm of multibillion-dollar global manufacturing and engineering consulting firm Barry-Wehmiller. Established in 2009, BW Forsyth Partners blends Barry-Wehmiller's unparalleled legacy of value creation and people-centric culture development with keen investing experience to help companies realize their true potential. With a focus limited to areas known well, BW Forsyth Partners seeks to partner with leadership teams to acquire small- to middle-market companies in the capital and component equipment, and professional services sectors. In each of our operating companies, BW Forsyth Partners deploys operational improvements and strategy development without compromising the autonomy, strategic vision and entrepreneurial spirit of their leadership teams. Job Description: POSITION: Mechanical Engineer III DEPARTMENT: Engineering REPORTS TO: Mechanical Engineering Leader COMPANY SUMMARY: Intec Automation Inc. is an established (25+ years of business), small automation company based in Rochester, NH that specializes in the design and build of custom automation equipment. To support our continued growth, we are looking for an energetic individual to serve as a Mechanical Engineer. The individual we are seeking must enjoy problem solving, and rarely building the same machine twice. The company needs a hands-on, assertive individual that is self-motivated, pursuant of personnel development and growth, who is willing to share knowledge and enhance the capabilities of co-workers and the company alike. GENERAL PURPOSE OF JOB: Designs, develops, and tests all aspects of mechanical components, equipment, and machinery. Design parts and assemblies alone or in a team of engineers. Review and complete MCRs (MSI Engineering Change Requests). ESSENTIAL DUTIES AND RESPONSIBILITIES: Designs, develops, and tests all aspects of mechanical components, equipment, and machinery. May integrate components to produce the final design; and evaluate the design's overall effectiveness, manufacturability, cost, reliability, and safety. In addition to design and development, the position may provide production supervision of parts and equipment, determine the causes of component failure, and test manufactured products to maintain quality. Position may be required to assist and communicate with customers on the project management and technical aspects of the product and assist in product planning, installation, and operation. Position is responsible for appropriately documenting design and processes related to the end product. Position will utilize Solidworks and EPDM to create and store drawings electronically that can then be viewed, printed, or programmed directly into automated manufacturing systems. Position will also prepare variations and changes to current design drawings. Position may involve designing or modifying custom tooling (mold, dies, etc.) with product managers or customers. Position may involve process development on various systems with product managers or customers. Position will utilize the ERP (M1) system to create or modify parts and assemblies for Procurement. Assist or lead creating engineering process documentation. Ad-hoc projects as needed. MUST-HAVE SKILLS: Proficiency in designing mechanical components, assemblies, and systems with attention to manufacturability, reliability, and safety Advanced skills in SolidWorks for 3D modeling and drafting Ability to create and maintain detailed engineering drawings, BOMs, and process documentation Familiarity with ERP systems such as M1 for part creation and procurement processes Competence in stress analysis, tolerance stack-up, and material selection Experience designing or modifying custom tooling (molds, dies, fixtures) Ability to develop and optimize manufacturing processes Strong problem-solving skills for diagnosing component failures and implementing corrective actions Skills in testing mechanical systems for quality, reliability, and compliance Strong communication skills for collaborating with customers on technical and project details Ability to work independently and in a team environment, sharing knowledge and mentoring others Capable of creating custom, one-off designs and solving unique engineering challenges Proficiency in producing clear, high-quality engineering documentation Capability to lead technical efforts and supervise interns or junior engineers ADDITIONAL SKILLS: Experience with EPDM for managing design data and revisions Understanding of mathematical concepts relevant to mechanical engineering Familiarity with Quality Assurance concepts Ability to assist in planning, scheduling, and coordinating technical efforts throughout the project lifecycle SUPERVISORY RESPONSIBILITIES: Position could lead and direct the work of other members of the technical team. Typically, this would be a technical report on a project-by-project basis without direct supervisory responsibilities. May train and supervise interns and other Mechanical Engineers. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and Experience: Level 8: Masters degree (M.A.) or equivalent experience in Mechanical Engineering; plus, five to ten years related experience and/or training. Language Skills: Level 5: Ability to read, analyze, and interpret common scientific and technical journals, and legal documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies. Ability to effectively present information to your specific group and top management. Math Skills: Level 5: Ability to apply advanced mathematical concepts related to Mechanical Engineering such as exponents, logarithms, quadratic equations, and permutations. Ability to apply mathematical operations to such tasks as frequency distribution, determination of test reliability and validity, analysis of variance, correlation techniques, sampling theory, and factor analysis. Reasoning Ability: Level 6: Ability to apply principles of logical or scientific thinking to a wide range of intellectual and practical problems. Ability to deal with nonverbal symbolism (formulas, scientific equations, graphs, etc.,) in its most difficult phases. Ability to deal with a variety of abstract and concrete variables. Benefits Package Available for all levels: Competitive Salary (increases with level) Medical & Dental Insurance 401k Retirement Plan FSA Plan Life Insurance Paid Vacation/Personal Time Professional development opportunities Physical Demands Applicable to all levels: Stand, Walk, Push, Pull, Reach Overhead, Bend to Floor Sit for Extended Periods of Time May Occasionally Need to Lift Up to 50 Lbs. Normal Visual Requirements for Reading Written Instructions and Computer Screens Normal Hearing Requirements for Verbal Communications Normal Manufacturing Environment with Occasional Exposure to Loud Noise #LI-SR1 At Barry-Wehmiller we recognize that people come with a wealth of experience and talent beyond just the technical requirements of a job. If your experience is close to what you see listed here, please still consider applying. We know that our differences often can bring about innovation, excellence and meaningful work-therefore, people from all backgrounds are encouraged to apply to our positions. Please let us know if you require reasonable accommodations during the interview process. Barry-Wehmiller is an equal opportunity employer. M/F/D/V This organization uses E-Verify. Applicants may be subject to pre-employment screening which may include drug screening, reference checks, employment verifications, background screening and/or skills assessments. Company: Machine Solutions, Inc.

Job Purpose Directly contributes to the execution of AEC's strategic plans and overall growth of AEC by being a primary interface for Engineering, R&T and AEC's Business Development organization to drive insertion of composite material based emerging technologies into applications. This individual will identify and drive internal and customer facing activities to accelerate AEC's profitable growth through technology differentiation. Achieving this requires establishing and maintaining outstanding relationships with agreed target customers, AEC senior leadership and collaboratively working with AEC's Engineering, Customer and Marketing organization to strengthen AEC's brand in the marketplace. Job Responsibilities In performing their respective tasks and duties, all employees are expected to adhere to Albany's current values: Albany Wins Together, Count on Each Other, Own Your Actions, Care About Each Other, and Share Your Enthusiasm. Safety must always come first; we never compromise on safety for the sake of achieving another objective. Employees are also responsible for the health and safety of themselves and each other. Composite structures technical lead in capturing new opportunities and leading application developments for AEC's new and emerging technologies with new customers; and primary technical interface to AEC Business Development organization on efforts to insert our new and emerging technologies with existing customers on either current or new platforms Contributes directly to the execution of customer and internally funded development projects aimed at TRL 4-7 applications Responsible for developing technical scopes of work, proposals, and directional production pricing targets to drive adoption of AEC's technologies Provides technical leadership and support to project engineers during project execution Develops and maintains strong relationships with targeted key customers to identify: customer needs where AEC's unique technology can be leveraged to provide a solution new programs that provide the best opportunity to insert AEC's unique technologies in the near intermediate and long term opportunities where our customers' and AEC's R&D activities could complement each other through collaboration Works collaboratively with AEC's Business Development organization to ensure that engagements with customers lead to a common vision and value for AEC Supports the strengthening of AEC's brand in the marketplace through industry and trade show engagements Contributes to AEC's technical organization as a recognized leader in composite materials and processes knowledge base across the organization Supports the ongoing direction of AEC's technologies focus areas by aligning the voice of the customer with AEC's growth strategies Supervisory responsibility: No Supervisors are responsible for overseeing their work group including but not limited to: formal evaluations/performance management as set out by the organization, recruitment, and developing

To be eligible to enlist in the U.S. Navy, candidates must be between the ages of 18-34 The most powerful energy sources in the world need the most powerful minds behind them. As a Nuclear Reactors Engineer, youll be responsible for researching, designing, maintaining, operating and regulating the nuclear reactors and power plants that drive the most advanced fleet of submarines and aircraft carriers on Earth. Here, you can fuel a passion for problem-solving by defining and redefining the cutting edge of nuclear propulsion, while setting the standard in nuclear reactor research and regulation. RESPONSIBILITIES Naval Reactors Engineers have oversight of the Navy's entire fleet of nuclear-powered ships as well as shore-based prototypes and nuclear propulsion support facilities for Americas Navy. The wide array of technical areas involved in the Naval Nuclear Propulsion program include: Reactor and fluid systems design Reactor physics Materials development Component design such as steam generators, pumps and valves Instrumentation and control of reactor, steam and electric plants Testing and quality control Shielding Chemistry and radiological controls As a Navy Reactors Engineer stationed at Naval Reactors Headquarters in Washington, D.C., you will provide technical oversight while managing projects ranging from reactor design to fleet operations to de-fueling and decommissioning warships. PAY AND BENEFITS From the day you start, youll receive: Competitive salary Free health insurance Free housing A retirement plan 30 days paid vacation per year EDUCATION OPPORTUNITIES In addition to the best-in-class training and state-of-the-art facilities, current undergrad students who meet the prerequisite background will also get the chance to get paid while finishing school through the Nuclear Propulsion Officer Candidate (NUPOC) program. Students in majors like mathematics, engineering, physics and chemistry may receive preferred acceptance into the program. If accepted into the NUPOC program as an aspiring Naval Reactors Engineer, you can: Receive a salary in excess of $4,000 per month for up to 18 months prior to your college graduation Receive an immediate one-time sign-on bonus of $15,000 Enjoy military health care benefits while you are a student in the program Postgraduate Education Opportunities As a Naval Reactors Engineer, once youre out of school youll have a position waiting as a respected professional and Officer affiliated with the most accomplished nuclear program on earth. Beyond undergraduate and formal Navy training and education, you can pursue additional graduate education through the following: Post-9/11 GI Bill Navy Tuition Assistance Program Completing Joint Professional Military Education (JPME) at one of the various service colleges Using Tuition Assistance to attend online or in-person graduate programs during shore assignments. Navy College Program VOLED Assistance Center VOLED Region Advisors The Naval Postgraduate School (NPS) Navy War College (NWC) USAF Air University Air Command and Staff College QUALIFICATIONS AND REQUIREMENTS U.S. citizen between the ages of 19 and 29. Exceptions may be possible up to age 40. Graduate or current student pursuing a B.A., B.S. or M.S. (preferably major in mathematics, engineering, physics, chemistry or other technical areas). Those still in school may apply as early as 18 months from completion of an undergraduate degree for Naval Reactors Engineers. Applicants may also join the NUPOC program as early as 12 months from completion of a master's degree. Additional academic requirements include: Completed one academic year of calculus Completed one academic year of calculus-based physics A competitive GPA and a minimum grade of "B" in all technical courses General qualifications may vary depending upon whether youre currently serving, whether youve served before or whether youve never served before. WORK ENVIRONMENT Preliminary training and eventual staff assignments center around Naval Reactors Headquarters at the Navy Yard in Washington, D.C. At Headquarters, you will be a part of an elite, streamlined staff of roughly 500 people who oversee the entire Naval Nuclear Propulsion Program from cradle to grave. Even junior-level Naval Reactors Engineers assume responsibility for key technical work in a variety of state-of-the-art facilities, including: Two Department of Energy laboratories Two nuclear prototype/training sites Nearly 100 nuclear-powered ships and submarines Six shipyards More than 1,000 firms that support the Naval Reactors Program RequiredPreferredJob Industries Government & Military

This position is responsible for the planning, direction, and coordination for the development of innovative non-woven products for a broad range of applications. Specific areas of focus will include wet-laid non-wovens formed from engineering fibers and bonding systems. Products will be developed starting from laboratory hand sheets to in-house pilot trials to production scale qualification runs. Development work will concentrate on innovative solutions to market needs, with the accompanying goal of establishing a strong intellectual property base. Ancillary programs related to product enhancements, cost reductions, etc. will be required at times. 1. Maintain a “Safety First” attitude in the performance of all tasks. 2. Must be knowledgeable in the effective use of Lean Continuous Improvement (LCI) tools and concepts to assist in process improvements, both within Lydall, and externally at our customers/suppliers. Serve as an active participant in LCI programs. 3. Work with Marketing and Operations to develop products to meet customer requirements for new business opportunities. 4. Use project management tools when appropriate. 5. Coordinate and lead production trials of new and modified products. Supervise Pilot scale trials when appropriate. 6. Draft internal and customer specs for developed products. 7. Assist Quality Assurance in evaluating and resolving unusual, non-routine customer complaints. 8. Provide technical assistance to Manufacturing concerning unusual, non-routine situations. 9. Work with Purchasing and Manufacturing in the evaluation of new sources of raw materials, product improvements and/or cost reductions. 10. Prepare and distribute appropriate reports to document technical findings, following ISO requirements. 11. Evaluate competitive products as needed. 12. Assist in the preparation of patent applications for new technologies. 13. Supervise, train, evaluate, develop and coach technical staff. This includes conducting annual performance appraisals for all direct reports. 14. Coordination of time and attendance system / labor reporting. Daily approval of time and attendance punches including pay codes. Other: • Must adhere to all company and location policies and safety rules • Must be able to work extended hours when required • All other duties as assigned Qualifications: • BS in Paper Science or Chemical Engineering preferred, chemical engineering or material science considered. • Five to seven years of industrial experience. • Normal travel requirements should not exceed 20 percent. • Ability to work in cross-functional teams within the facility as well as throughout the company • Ability to organize, manage, and control workflow • Ability to meet deadlines despite conflicting priorities • Proficiency with a variety of software applications, such as Microsoft Excel, Word, PowerPoint, and Office • Strong verbal, written, analytical, presentation and interpersonal skills • Supervisory skills to manage at least one technician.

Aviation Technology Associates (AVTECH) is looking for an Aircraft Sustainment / Liaison Engineer for the following locations: Oklahoma City, OK Farfield, CA Wichita, KS Altus, OK Portsmouth, NH Trenton, NJ Goldsboro, NC Position Purpose: Liaison (Sustainment) Engineer supporting line maintenance and heavy maintenance depot operations at US Air Force bases. Principle Duties and Responsibilities: Essential Functions: Providing technical dispositions and guidance for aircraft issues that exceed published limits for structural damage including sheet metal and composite repairs. This often includes performing a structural analysis. Providing work deviation authorization, interpretation of service documents & Technical Orders. Providing options for repairing versus replacing a part to minimize financial impact. Providing aircraft system trouble shooting assistance. Attending regular production meetings to ensure timely support. Providing on-site engineering assistance for significantly damaged aircraft as required. Coordinating events/issues with USAF Program Office for additional action, troubleshooting and follow-up. Monitoring trends and recurring discrepancies requiring corrective action. Developing Typical Repairs and manual supplement to eliminate repetitive Engineering Technical Assistance Requests (ETARs). Authoring policies and processes to ensure general compliance with FAA regulations As an ideal candidate to join the AVTECH team, you will meet the following: Education and Experience Requirements: BS Degree (or higher) in Aeronautical, Aerospace, Mechanical, or Structural Engineering Two plus (2+) years in specific technical discipline Required Unique Skills: Ability to perform structural analysis to substantiate repairs Strong written and verbal communication skills Strong investigative, analytical, and problem solving skills Self-motivated, conscientious and ability to prioritize multiple tasks Knowledge of FARs, FAA policies, and vendor manual (AMM, IPC, CMM) Must be willing to work a flexible work schedule to meet internal customer's needs Aircraft/airline/MRO aviation engineering experience desired Ability to pass a Tier 1(minimum) Investigation for work on Department of Defense contracts. Existing security clearance is preferred. Location / Travel: This is a REMOTE position with no relocation requirement. Travel to USAF bases will be required once per month (minimum) for 3-4 days at a time. All travel costs are covered (including, flights, hotel, rental car, GSA per diem, etc.). Additionally, the travel locations/frequency are subject to change (with an advanced notice) depending on where coverage is needed. This is a salary position including paid time off and health insurance benefits.

Are you a Mechanical Engineer who loves automation? Our client is seeking a full-time Automation Design Engineer with experience in automation design as a Mechanical Engineer. What We're Looking for: Are you able to generate concept drawings in AutoCAD and follow through to machine build/delivery? Mechanical Engineering degree or commensurate experience? Strong technical writing skills? Desire to travel in North America and beyond. What You'll be Doing: Detail drafting from existing designs and the ability to direct other drafting resources. Conception and design of new automation using AutoCAD, Inventor, and SolidWorks. Creating BOM's and releasing machined, fabricated, and purchased parts. Machine build follow-up, revisions, and documentation. Hands-on automation assembly and development. Interface with customers to support equipment installation and service and provide process solutions. Compensation: If hired, you will enjoy a comprehensive compensation and benefits package, including an on-site fitness center, health insurance (standard plans and an HSA plan), dental and vision, flexible spending accounts, life insurance, short term disability, critical illness, accident insurance, legal shield, and a 401(k)-retirement plan with company match. Vacation, sick time, and paid holidays. If this sounds like a fit for you, please apply at ********************* under "Automation Design Engineer".

Ameresco, Inc. (NYSE:AMRC) is a leading energy solutions provider dedicated to helping customers reduce costs, enhance resilience, and decarbonize to net zero in the global energy transition. We are a trusted, full-service partner to public sector and government entities, K-12 schools, higher education, utilities, and healthcare customers across the U.S., Canada, the U.K., and Europe. At Ameresco, we show the way by developing, constructing and operating tailored smart energy efficiency solutions, distributed energy resources, and infrastructure upgrades that drive cost savings, resilience, decarbonization, and innovation. Our comprehensive portfolio is built to address the challenges of today and adapt the future, ensuring long-term sustainability and success for our customers. Position Overview: Ameresco is currently seeking an Operations Engineer to work with Ameresco's Alternative Fuels group, based out of our Portland, ME office. This position supports the maintenance and troubleshooting of control systems for biomass, landfill gas to energy, automated demand response, combined heat and power, and alternative energy projects throughout the United States. Responsibilities: Handle service requests, helping energy plant operators to troubleshoot plant issues. Monitor and troubleshoot operation of automated reporting systems, data collection systems, and plant SCADA systems. Travel to plant and facility locations to install or troubleshoot servers, hardware, data collection systems, plant and control systems, networking equipment, etc. Work with the Compliance Team to ensure that data collection systems are in line with contractual and permit obligations. Maintain power and renewable natural gas processes. Assist in operational plant troubleshooting, tuning, and controls. Integrate with third party equipment using industrial protocols including EthernetIP, Modbus, and others as required. Program servers with remote access capability to run HMI applications, data collection systems, “call out” notification systems and other programs and applications as required. Perform other duties as assigned. Some travel is required. Minimum Qualifications: Bachelor of Science in Engineering, or 5 years of related experience in landfill gas to energy (LFGTE) or renewable natural gas (RNG) operations. Additional Qualifications: Understanding of power plant systems and ability to troubleshoot and understand data from those systems. Exposure to Allen Bradley RSLogix 5000 / 500 platforms and HMI and Historian software packages. Experience configuring and maintaining Microsoft Server operating systems in a virtualized environment. Experience configuring Ethernet-based networks using industrial control protocols including EthernetIP, Modbus TCP, and OPC. Proficient with programming, including experience with PLC ladder logic, Visual Basic, and SQL Proven ability to gather, validate, and analyze quantitative data and information in Excel. Valid Drivers' License issued by state of residence and in good standing. #LI-HP1 Ameresco challenges the brightest, most talented, and creative individuals in the industry by providing an environment that fosters initiative and achievement. We are proud of our comprehensive and competitive employee benefits, including people-oriented insurance, investment, and incentive plans. All official communications from Ameresco will originate from **************** email address. Any correspondence from other domains should be regarded as fraudulent. Please report any suspicious activity to the platform where the issue was encountered. For further inquiries or concerns, please contact us at 1-866-AMERESCO Ameresco is an Equal Opportunity Employer.

Job Description Diodes Incorporated is seeking a full-time equipment engineer to join our talented manufacturing team. This position requires a flexible schedule and the willingness to work occasional overtime. You will be responsible for multiple activities with respect to future planning, project execution, maintenance and repair of semiconductor manufacturing equipment. These activities would include deliverables such as troubleshooting and repairs, continuous improvements to help with availability, cost savings and OEE. Good written skills for creating and updating activity checklists, corrective and preventative maintenance procedures, and specification updates, as well as good interpersonal skills to provide clear technician direction and training and present data to management. Must have good project execution acumen, strong semiconductor equipment experience and be comfortable working in a fast-paced manufacturing environment and taking ownership of equipment within your assigned area. Principle Duties and Responsibilities: Working hours: 40-hour work week, Monday through Friday. OT is expected in order to keep your assigned area running as smoothly as possible. Work is performed within a clean room environment that requires the wearing of a smock, hood, booties, latex gloves, and safety glasses. Requires the use of airline respirator. Requires occasional wearing of personal protective equipment including, but not limited to, aprons, gauntlets, and full-face masks. Requires lifting of objects that weigh up to 50 lbs. May require work with hazardous gases, chemicals, and high voltages. Troubleshoot and repair electromechanical systems. Troubleshoot and repair electro-pneumatic systems. Consistently directs one's own work at a high level and demonstrates advanced leadership skills for small teams and is sought out as a subject matter expert for assigned area. Follows procedures without deviation and update them as needed. Discusses repair and maintenance requirements with peers and balances work with available talent. Reviews tool histories for all area tools looking for common themes and proposes improvements / repairs and executes on them. Identifies abnormal tool conditions and execute corrective actions. Has clear technical knowledge of the equipment and its sub-systems within area assigned. Has process knowledge enough to understand recipes and the desired outcomes. Understands and uses SPC charts to identify failure modes. Responsible for the completion of all scheduled and unscheduled preventative maintenance and repair procedures in a timely, accurate, and safe manner within assigned area. A safety-minded approach is required: employees must be able to learn, understand and follow all safety documentation, specs and protocol, including LOTO. Must also be able to identify any/all safety concerns and regulatory violations in order to eliminate them. May possibly be cross trained in other areas as needed Knowledge, Skills and Abilities: Strong electrical/mechanical semiconductor knowledge. Ability to perform He-Leak checks of gas and vacuum systems. Comfort handling chemicals, including acids, bases, and solvents. Experience troubleshooting electrical issues. Experience troubleshooting vacuum systems. Ability to read electrical schematics Ability to use digital multimeters and voltage supplies. Ability to work well in a collaborative environment, and as part of a team. The flexibility to work outside of normal schedule, cross train, (learn more than one job or operation) and multi-task as needed. A BS in Engineering or relevant technical discipline, or Military Equivalent. Diodes Incorporated (Nasdaq: DIOD), a Standard and Poor'sSmallCap 600 and Russell 3000 Index company, is a leading global manufacturer and supplier of high-quality application specific standard products within the broad discrete, logic, and analog semiconductor markets. Diodes serves the consumer electronics, computing, communications, industrial, and automotive markets. We offer a competitive benefits package to include medical, dental, vision, FSA, 401k with company match, company paid Short Term and Long-Term disability and standard life insurance policy. We also provide paid time off and an employee wellness program.

Change the world. Love your job. In your first year with TI, you will participate in the Career Accelerator Program (CAP), which provides professional and technical training and resources to accelerate your ramp into TI, and set you up for long-term career success. Within this program, we also offer function-specific technical training and on-the-job learning opportunities that will encourage you to solve problems through a variety of hands-on, meaningful experiences from your very first day on the job. The TMG Development program is a 12-month program for new college graduates in the TMG organization. Do you want to work for an organization that values your opinion? Do you want to work for an organization where you can play a pivotal role in several different areas? As a Texas Instruments Equipment Engineer, you will have the opportunity to work in a vibrant and dynamic team-oriented environment. Responsibilities include: Evaluate, select, and order equipment that is most appropriate and cost effective for the manufacture of company products Oversee the installation, modification, upgrade and maintenance of manufacturing equipment Keep current on equipment manufacturers' technical notices, upgrades and safety issues Study equipment performance and reliability Establish programs and solutions for increasing uptime and for equipment problems that affect the manufacturing process Provide technical support to the manufacturing equipment repair and process engineering organizations Define and write preventative maintenance schedules Minimum requirements: Bachelors degree in Electrical Engineering, Electrical & Computer Engineering, Chemical Engineering, Mechanical Engineering, Materials Science Engineering, Physics or related engineering degree Cumulative 3.0/4.0 GPA, or higher Preferred qualifications: Knowledge of AMAT PVD and/or AMAT TxZ chambers equipment Knowledge of PVD, CVD, high vacuum and/or ultra high vacuum Knowledge of other equipment (e.g., AMAT, Veeco, TEL, Novellus, and/or ASM) Understanding of tool monitoring and interdiction software, and equipment maintenance and documentation Strong verbal and written communication skills Demonstrated strong analytical, critical thinking and problem solving skills Ability to work in teams and collaborate effectively with people in different functions Ability to take the initiative and drive for results Strong time management skills that enable on-time project delivery Ability to work effectively in an interrupt-driven, fast-paced and rapidly changing environment Demonstrated ability to build strong, influential relationships

Job Description Sabre Yachts is a leading manufacturer in building Downeast style motor yachts, based in Raymond, Maine since 1970. Sabre has exceptional world-class craftsmen and women in the boat building industry who craft beautiful luxury yachts. Product Engineer Sabre Yachts Raymond, ME | Full-Time | On-Site Position Summary Sabre Yachts seeks a skilled Product Engineer to support the full lifecycle of our premium yachts, from concept development through production and customer delivery. This role serves as a key technical authority, ensuring designs meet our standards for quality, performance, manufacturability, and serviceability. The Product Engineer works cross-functionally with design, production, purchasing, and customer service to deliver engineering solutions that uphold our brand values and meet cost, schedule, and regulatory requirements. Responsibilities Engineering Support development of new and existing models from concept through production release. Create and maintain 2D/3D CAD models, drawings, assemblies, BOMs, and change notices. Collaborate with production to resolve build issues and improve manufacturability. Coordinate prototype builds and sea trials; capture feedback and implement improvements. Provide technical support for warranty, service, and field-related issues. Problem Solving & Improvement Identify and document design or production issues. Apply root-cause analysis and lead cross-functional problem-solving efforts. Implement corrective and preventive actions to improve quality and reliability. Support continuous improvement across models, systems, and processes. Administrative & Facility Support Maintain accurate drawings, reports, and engineering documentation. Manage multiple projects and meet schedule commitments. Support document control, design standards, and engineering systems. Maintain a clean, safe, and organized work area and assist with facility improvement efforts. Qualifications A degree in engineering or industrial design is preferred; however, equivalent technical training or production-focused engineering experience is also accepted. 3+ years of experience in boatbuilding or manufacturing engineering preferred. Proficiency in CAD software (SolidEdge, Rhino, AutoCAD, or equivalent). Strong understanding of marine systems, composites, and production processes. Excellent communication, analytical, and problem-solving skills. Ability to manage multiple priorities in a fast-paced production environment. ABYC Certification or PE licensure is a plus. Additional Requirements Ability to interpret engineering drawings, specifications, and regulatory standards. Strong math and computer skills, including spreadsheets and modeling tools. Ability to maintain confidentiality regarding proprietary product information. The Product Engineer works cross-functionally with design, production, quality control, purchasing, sales & marketing, and customer service. Works under general supervision with expected independent judgment on technical matters.

Harriman is growing! We are looking for a Mechanical Engineer to join our team and join our full-service practice. If you are looking for a firm that understands the importance of work-life balance, enjoys working with lots of other people, and can work independently in our hybrid-work environment, then this is an opportunity that you need to look into! Working at Harriman, you will be immersed in our mission to design relevant and innovative solutions to meet human needs. Our work is challenging, creative, and is based on the belief our designs are the best when we collaborate together. Duties and Responsibilities: A licensed engineer will be expected to act independently regarding engineering methods and calculations, applying sound and diverse knowledge of engineering principles and practices in a broad array of assignments. At level 1, a licensed engineer is expected to plan and conduct work including evaluation, selection, and design of mechanical equipment and components. They are expected to assess problems and answer technical questions independently in front of clients, including providing guidance to and review the work of unlicensed engineers and designers. They are also expected to perform project management duties on small projects. Requirements Minimum 4 years of experience. Familiar with the principles of engineering, knowledge of advanced math, physics, and mechanical science applicable to the field. Undergrad Degree (4 years minimum) in Mechanical Engineering (other engineering degrees to be considered on a case-by-case basis). Has passed the Professional Engineers exam. Able to complete small and medium sized projects with minimal supervision. Proficient with the tools required to achieve project completion (ie software, reference documents, calculations, and contacts). Able to work collaboratively in a team environment. Software Proficiencies: Proficient with Revit and/or AutoCAD. Proficient with Load Calculation software, Trane Trace 700/3D Proficient with PDF Editing software such as Adobe or Bluebeam. Proficient with Newforma Project Center. Proficient with Deltek Vision. Capable of utilizing additional software as needed to perform complex calculations. Microsoft Office Suite Zoom/Teams/Video Conferencing Software What will set you apart In addition to the required technical skills, we must work together collaboratively in a team environment to succeed. Some general expectations that are required for all staff members include, but are not limited to, the following: Strong work ethic Positive attitude Be a team player Be flexible, adaptable, and open to new ideas Actively seek out clarification via the expertise of colleagues when unsure. Be respectful of others and their opinions and ideas Manage your efforts efficiently and effectively to complete tasks on time and with limited impact on co-worker's schedules Be prompt to appointments and meetings out of the office as well as in-house Inform studio leader of PTO, or unexpected time away from the office and record in studio PTO Calendar Participate in meetings, trainings, and activities such as project team and committee meetings, all-office meetings (such as the Monthly Harriman Huddle), and studio-specific meetings. Ability to accept and learn from criticism Avoid conflicts of interest Market oneself and the company always by conducting oneself professionally: we all represent Harriman! Communicate, communicate, communicate! Benefits: We offer completive salaries and a full benefits package including medical, dental, 401K program, hybrid work schedule, gym reimbursement, and a friendly, collaborative work environment. Harriman is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability or veteran status.