Plant operator jobs in Jacksonville, NC

Job Description POSITIONS AVAILABLE: 1 PRIMARY FUNCTION: Position is responsible for the efficient management of assigned plant and operations. This position has direct responsibility for personnel, equipment, scheduling, safety, quality, workmanship, and completion of assigned projects on time and within the estimated budget. This position may include duties within, but not be limited to: Asphalt Material, Equipment, Plant, and Electrical. ESSENTIAL DUTIES: 1.) Supervise and direct crew to assure completion of assigned project as instructed by the superintendent and/or other manager. Includes human resources and employee related matters. 2.) See that new personnel receive proper orientation to acquaint them with company policies, safety requirements, and job responsibilities. 3.) Conduct periodic evaluation of assigned personnel with special emphasis on their contribution to the company and our contribution to them. 4.) Assist and direct crews in proper use of equipment, improving job performance, controlling cost and quality of work, increasing productivity, improving communication and housekeeping on project. 5.) Perform equipment inspections, request maintenance and repairs as needed. 6.) Order materials as needed for the project or operation of the plant. 7.) Monitor assigned personnel and maintain regular work hours. Maintain daily payroll records and log hours worked for each employee assigned to you. 8.) Complete all required daily reports, verify their accuracy and transmit promptly to the supervisor. 9.) Ensure all work complies with OSHA, MSHA, local laws, ordinances, and EPA regulations. 10.) Ensure all work is performed with an emphasis on safety. Insist upon compliance of all safety regulations. Conduct daily huddle meetings with safety as the primary agenda. 11.) Maintain good relations with the general public, engineers, architects, inspectors and customers to facilitate job progress and to promote a positive company image. Develop a courteous and considerate attitude toward these groups. 12.) Work long, flexible hours as demanded by our customers including nights, weekends, and work outside for extended periods during all seasons of the year. 13.) Perform necessary work while complying with all company policies and procedures. 14.) Perform additional duties as required in the operations of the project or plant, or as directed by the supervisor. 15.) Must have regular and predictable attendance. MINIMUM REQUIREMENTS: Education: Must be a minimum of 21 years old Work Experience: Minimum of 3 years' experience in asphalt plant operations Experience with NCDOT requirements Physical Demands: Light physical effort required including pulling and lifting or moving materials up to 20 pounds. If a position specific Physical Demands sheet is attached, it will describe in more detail the physical demands that are required. Physical Activity: Position requires the ability to continuously work around noise, dust, heat, cold, oil, and heavy equipment. Personal protective equipment may be required. Position requires ability to exchange ideas quickly and clearly and the ability to receive and evaluate detailed information and instructions. The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required of the position. All employees may have other duties assigned at any time. EOE. Minorities/Women/Protected Veterans/Individuals with Disabilities.

Job Description Operate and monitor chemical processing equipment to ensure optimal performance and safety. Conduct routine inspections of machinery and equipment to identify any issues or maintenance needs. All operators are expected to work as a team and use consensus decision making to achieve departmental goals and objectives. Maintain accurate records of production data, including batch numbers, quantities, and quality control measures. Collaborate with team members to implement lean manufacturing practices for improved efficiency. Read and act upon daily area operating instructions. Provide feedback to supervision on operational issues, related to process conditions, improvement ideas, operational instructions, etc. Provide shift change relief. Conduct hourly (minimal requirement) tours of manufacturing area to ensure good operating condition of all equipment. Identify and resolve mechanical and/or process-related issues. Check levels, temperatures, pressures etc. Communicate findings to supervision. Collect and analyze process samples. Record results on prescribed schedule. Work regularly assigned shifts and provide a fair and equitable amount of overtime for co-worker absences, illnesses, vacations, holidays, etc. Assist in materials handling, including the safe transport of chemicals within the facility. Adhere to all safety protocols and SOP guidelines to maintain a safe working environment. Participate in training programs to enhance skills related to machining, fabrication, and forklift operation. Qualifications: High school diploma or equivalent required Process Technology degree or certification Ability to read, write, and speak English fluently 2-3 years' experience working with machinery, mechanical, and chemical processes No fear of heights or confined spaces Experience with materials handling techniques and safety practices. Proficient computer skills, the ability to use process control software and enter data Ability to perform mathematical calculations Ability to complete Hazmat training Strong problem-solving skills and the ability to troubleshoot equipment issues effectively. Commitment to maintaining high standards of safety and quality throughout all operations. Possess a valid driver's license Must have clarity of vision at 20 feet or more and at 20 inches or less. Able to judge distances and space relationships. Peripheral vision is needed while eyes are fixed. Eye adjustment is used in doing near point work. Able to identify and distinguish colors. Express ideas by spoken word, as well as perceive the nature of sounds. Must be able to speak and hear other plant employees, vendors, customers, etc. Preferred Qualifications: Associate degree in chemistry or related field Lean manufacturing experience boiler experience Certified forklift operator 3-5 years' experience as a process/chemical operator Pipefitting experience Experience in instrumentation & industrial electrical components Environmental Conditions: Job duties occur both inside and outside. There is exposure to extreme temperatures, moisture, humidity, and loud noises Gases, dust, odors, fumes, and mists associated with normal chemical plant operation may be present In production areas employees must wear company supplied protective equipment such as hard hat, safety glasses, respirator, gloves, slickers, and boots Must be able to climb stairs, bend, stoop, walk, twist, grasp, pull, push, reach overhead, and lift up to 50 pounds Benefits: 401(k) 401(k) matching Dental insurance Employee assistance program Flexible spending account Health insurance Health savings account Life insurance Paid time off Parental leave Safety equipment provided Vision insurance Join us as we strive for to maintain a safe, efficient, and welcoming environment for all! 12 hour rotating shifts Overtime as needed Call in as needed

ELECTROLUX HOME PRODUCTS DESCRIPTION Plant Assembly Utility DUTIES AND RESPONSIBILITIES: Performs all duties on the assembly lines and/or operating a Powered Industrial Truck to provide plant wide support when needed Tests and repairs ranges appliances Trains new associates on job tasks and assists in follow-up of quality issues Troubleshoots functional defects Repair workmanship errors Will cover absenteeism or other reasons in the plant May perform other job duties as needed such as insulation wrapper QUALIFICATIONS AND BASIC SKILLS: High School Diploma or GED 1+ years experience testing, repairing, and troubleshooting appliances or mechanical system 1+ years experience with assisting with quality issue resolution and process improvements Must achieve Powered Industrial Lift Truck certification within 6 months of hire Must achieve EMS Yellow Gear Certification within 30 days of hire and EMS Green Gear Certification within 12 months Able to bend, stoop, grip, reach and lift up to 40 lbs. on a repetitive basis Able to stand for the majority of the shift Electrolux Home Products, Inc. is an Equal Opportunity Employer. Qualified applicants are considered for employment without regard to race, color, religion, gender, national origin, citizenship, age, physical or mental disability, genetic information, sexual orientation, veteran status, military status, or any other characteristic or status protected by federal, state or local law. If you need assistance during the application process due to a disability, the company will attempt to provide reasonable assistance. Applicants will not be penalized as a result of a request for assistance.

Process Expert (Chemical Operator) in production unit will be responsible for operating and troubleshooting equipment, assisting maintenance, and maintaining environment. Process Experts are required to learn all jobs in the unit including floor operations and control room, understand and follow all Site and Unit Safety procedures and protocols, and perform all functions necessary to chemical manufacturing. Responsibilities: Perpetuates a culture of safety, quality, reliability, and engagement with all colleagues, contractor, and guests in the unit. Conduct routine checks on equipment and proactively report, mitigate, and solve emerging issues. Operate field equipment (e.g., valves, pumps) to perform operations tasks per SOP. Conduct Behavior Based Observations (BBO) and communicates HazRecs and Near Miss incidents. Provide inputs to improve Standard Operating Procedures (SOPs) and Energy Isolation Plans (EIPs), provide updates and changes as needed. Generates ideas and improvement projects. Start up and shutdown of process equipment in a safe manner. Attend training to improve and maintain production processes as required. LOTO equipment and issues safe work permits to turn over equipment to maintenance for repairs and participate in return to service of equipment. Housekeeping of area, participate in 5S. Performs preliminary troubleshooting on equipment and process malfunctions and make first attempt repairs where appropriate. Strictly follows all batch recipe sheets and instructions. Maintains accurate records of all observations and results. Accurately and thoroughly reports data via written (Logbook & SAP) to process leaders. Ability to work 12 hour rotating shifts, including nights, weekends, holidays, and overtime. Willing and able to work in inclement weather, climb structures and perform work at heights. All candidates will be fit tested for respiratory protection, therefore, clean shaven will be required. Qualifications: High School diploma or equivalent Mechanical and troubleshooting ability. Manufacturing or industrial experience a plus Effective communication skills both written and verbal to effectively interact with all levels of the organization. Ability to manage multiple priorities to effectively manage the needs in a fast-paced work environment while ensuring quality work and accurate results. Initiative, motivation, and self-discipline required to be successful in self-directed, collaborative work environment. Computer skills/aptitude and or proficiency on PC based systems Demonstrated ability to work as a contributing team member with a forward-thinking attitude and someone who encourages/engages others. Celanese is a global leader in chemistry, producing specialty material solutions used across most major industries and consumer applications. Our businesses use our chemistry, technology and commercial expertise to create value for our customers, employees and shareholders. We support sustainability by responsibly managing the materials we create and growing our portfolio of sustainable products to meet customer and societal demand. We strive to make a positive impact in our communities and to foster inclusivity across our teams. Celanese Corporation employs more than 11,000 employees worldwide with 2024 net sales of $10.3 billion. For more information about Celanese Corporation and its product offerings, visit ***************** Celanese is an Equal Opportunity Employer. Celanese does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. All employment is decided on the basis of qualifications, merit, and business need.

General Purpose: Perform all aspects of sampling, monitoring and testing required to maintain compliance with Federal State and Local regulations governing the wastewater treatment process, and storm water and sludge management. Perform other tasks as assigned. Role qualifications: Employee will need to be able to: Lift and stack 50 pounds Work at a fast pace for up to 3 hours at a time Work in a warm, dusty environment for extended periods. Work in a cold, moist environment for extended periods. Push and/or Pull heavy objects Tolerate the sight of continuous moving objects Walk up and down multiple flights of stairs multiple times daily. Have no fear of Heights. Climb up and down ladders Be around chemical for extended periods Work responsibilities: Be able to perform and document various tests required by State and Federal agencies for the processing plant. Perform daily checks of the wastewater treatment process and periodic checks of pump stations. Have a working knowledge of the operation, methods and procedures of a wastewater treatment. Have a working knowledge of the machinery used for wastewater treatment and pumping stations. Have a thorough knowledge of mechanical equipment and the ability to diagnose and correct equipment malfunction. Have a working knowledge of basic machinery preventive maintenance and repair. Have a basic knowledge of State and Federal rules governing wastewater discharges and worker's safety. Have the ability to work with independence and to make routine decisions on the operation of the plant processes and equipment during the Waste Water Manager's absence. Essential Skills and Experience: Be dependable and honest. Time management: the ability to organize and manage multiple priorities Strong team player Commitment to company values Follow all safety rules and procedures. Operate or be trained to operate a forklift. Be able to work overtime when needed. Familiar with Lockout Tag out Nonessential Skills and Experience: Poultry experience Production Experience Plant Experience Physical Demands and work environment: The physical and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical demands: While performing the duties of the job, the employee is required to walk; sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; balance; stoop. Employee must occasionally lift and or move up to 50 pounds. Employee must be able to walk up and down multiple flights of stairs multiple times a daily. Specific vision abilities required by the job include close vision, color vision, depth perception and the ability to adjust focus. Work environment: While performing the duties of this job, the employee is exposed to weather conditions prevalent to the time. Employee will be working dusty environment. The noise level in the work environment is usually moderate to loud.

Job DescriptionSalary: negotiable/experience A Wastewater Operator is responsible for operating, monitoring, and maintaining wastewater treatment facilities to ensure compliance with environmental regulations and to protect public health and the environment. This role involves mechanical, chemical, and biological processes to treat and discharge or reuse wastewater safely. Key Responsibilities Operate and monitor wastewater treatment plant equipment and processes, including pumps, motors, aerators, filters, and chemical feed systems. Collect and analyze samples of wastewater and sludge to monitor treatment efficiency and compliance with regulatory standards. Adjust treatment processes based on test results and operational data to maintain optimal performance. Inspect and maintain equipment, perform basic repairs, and report malfunctions or needed maintenance. Record operational data, including flow rates, chemical usage, and meter readings, in daily logs or digital systems. Ensure compliance with federal, state, and local environmental regulations and safety standards (e.g., EPA, OSHA). Respond to alarms or emergencies, troubleshoot system issues, and take corrective actions. Maintain plant cleanliness and safety, including chemical storage areas and mechanical rooms. Assist with preventative maintenance programs and improvement projects. Collaborate with other operators, engineers, and supervisors to ensure efficient plant operations. Qualifications Education: High school diploma or GED required; associate degree in environmental science, water/wastewater technology, or related field preferred. Experience: Prior experience in wastewater or water treatment preferred; entry-level positions may provide on-the-job training. Licensing: State wastewater operator certification Skills & Abilities: Knowledge of wastewater treatment processes and equipment. Ability to read meters, gauges, and flow charts. Strong mechanical aptitude and troubleshooting skills. Understanding of safety and environmental compliance requirements. Basic computer literacy for data entry and SCADA systems. Physical ability to lift 50 lbs., climb ladders, and work in confined spaces or adverse weather conditions. Work Environment Work is performed in both indoor and outdoor settings, sometimes in noisy, wet, or odor-prone conditions. Rotating shifts, weekends, holidays, and on-call duty may be required to maintain continuous operations. Must adhere to strict safety procedures and wear protective gear when handling chemicals or operating machinery

Company Details Darling Ingredients repurposes and recycles materials from the animal agriculture and food industries - transforming them into essential ingredients that do everything from feeding animals to fertilizing crops to fueling planes and nourishing people. We're the number one publicly traded company of our kind, operating a global family of brands and businesses that span more than 260 facilities in over 15 countries. Our unique scale allows us to make entire industries less wasteful and more sustainable, helping move the world toward a more circular economy. Darling Ingredients offers full time employees a full suite of benefits including but not limited to the following: 401(k), Health, Dental and Vision Insurance, and Paid Time Off. Job Summary The Waste Water Operator controls water flows and processes through plant equipment and in biological systems. Performs test, maintenance, etc. to ensure proper operation of all waste water related equipment. Other duties as assigned by Plant Manager. Essential Duties/Responsibilities: Nothing in this restricts management's right to assign or reassign duties and responsibilities to this job at any time. * Perform and interpret analytical tests and observations necessary to monitor and control the treatment process. * Perform and interpret standard bacteriological examinations. * Perform required analytical methods process controls tests within acceptable quality control standards. * Collect water and waste water samples from the wastewater control plant. * Perform calculations, keep required records and utilize computer software. * Chemical inventory and addition throughout waste water treatment processes. * Maintain proper operation of DAF. * Control flows throughout wastewater treatment processes. * Daily clean foot valves and flow meters at pump stations. * Monitor aerator and mixers. * Responsible for the proper operation of disinfection system. * Apply chemicals to sustain a minimum of a 24 hour period. * All other duties as assigned. Minimum Qualifications: * High School Diploma or GED. * Minimum 1-year prior experience in a rendering facility or production environment. * Willing to obtain wastewater certificate. Preferred Qualifications: * One or more years of experience in a chemistry, microbiology, biochemistry or related field preferred. * Must be a self-starter and stay busy with constructive work with little supervision. * Good with math. * Good oral communication skills. The information contained in this job description is intended to describe the essential job functions required of those assigned to this job. It is not intended to be an exhaustive list of all responsibilities, duties, knowledge, skills, and abilities needed to perform the job. Please note that management retains the right to assign or reassign duties and responsibilities to this job at any time. The ability to competently perform all the essential duties of the position, with or without reasonable accommodation, demonstrated commitment to effective customer service delivery, integrity, and the ability to work productively as a member of a team or work group are basic requirements of all positions at Darling Ingredients. Darling Ingredients is an equal opportunity employer and gives consideration to qualified applicants without regard to race, color, creed, religion, age, pregnancy, sex, sexual orientation, gender identity, national origin, genetic information, physical or mental disability, military service, protected veteran status, or any other characteristic protected by applicable federal, state and local law. Know Your Rights: If you would like more information, please click on the link and paste into your browser: *************************** Working Conditions and Physical Demands The physical demands and work environment factors described below are representative of those that must be met by an employee to successfully perform the main duties of this job. Working Environment None Occasionally = up to 20% Frequently = 21% to 50% Constantly = at least 51% Exposed to unpleasant or disagreeable physical environments such as high noise level, strong odors, and/or exposure to heat and cold ☐ ☐ ☒ ☐ Exposed to bio hazardous conditions ☐ ☐ ☒ ☐ Exposed to toxic or caustic chemicals which mandate attention to safety considerations ☐ ☐ ☒ ☐ Exposed to Electrical hazards; risk of electrical shock ☐ ☒ ☐ ☐ Handles or works with potentially dangerous equipment ☐ ☐ ☒ ☐ Travels to offsite locations ☒ ☐ ☐ ☐ Other (please describe): ☒ ☐ ☐ ☐ Physical Demands None Occasionally = up to 20% Frequently = 21% to 50% Constantly = at least 51% Sit: Must be able to remain in a stationary position. ☐ ☐ ☒ ☐ Walk: Must be able to move about inside/outside office or work location. ☐ ☐ ☒ ☐ Use hands to finger, handle or feel: Operates a computer and other office machinery. ☐ ☐ ☒ ☐ Stoop, kneel, crouch, or crawl: Must be able to position one's self to maintain computers in the lab, including under desks and in the server closet. ☐ ☐ ☒ ☐ Climb or balance: Must be able to ascend/descend on a ladder. ☐ ☐ ☒ ☐ Talk, hear, taste, smell: Must be able to use senses to; effectively communicate with co-workers and clients and detect hazardous conditions. ☐ ☐ ☒ ☐ Weight and Force Demands None Occasionally = up to 20% Frequently = 21% to 50% Constantly = at least 51% Up to 10 pounds ☐ ☐ ☒ ☐ Up to 25 pounds ☐ ☐ ☐ ☐ Up to 50 pounds ☐ ☐ ☐ ☐ Up to 100 pounds ☐ ☐ ☐ ☐ More than 100 pounds ☐ ☐ ☐ ☐ Vision Demands Required No special vision requirements ☐ Close vision (clear vision at 20 inches or less) ☒ Distance vision (Clear vision at 20 feet or more) ☒ Color vision (ability to identify and distinguish colors) ☒ Peripheral vision ☒ Depth perception ☒ Ability to adjust focus ☒

Job Title: Wastewater Treatment PE/PM Type: Direct Hire located in Wilmington, NC Candidates must reside in the Greater Wilmington, NC areas. Required Skills & Experience: NC Professional Engineer (PE) Licensure or EIT on track for PE Licensure 4-8 years' experience in design and permitting of Water / Wastewater Treatment Plant (WWTP) projects. Design, permitting, and Engineering of Water/Wastewater Treatment Facility projects. QA/QC of designs for W/WW Treatment projects. B.S. Degree in civil/environmental/chemical engineering from a recognized, accredited program. Fundamentally sound, strong in design and value engineering, analytically strong problem-solving skills, experienced in dealing with regulatory agencies, and strong management, organization, and communication skills. Enjoy working with people, be proactive, and be a motivator. Driven to deliver quality product, a true understanding of schedule and budget, keeping managers informed, and following up to see a project to completion. Ability to work on multiple projects in parallel and handle projects from inception to completion. Willing to work as a team and have strong organization and communication skills. Requires a valid driver's license, acceptable motor vehicle record, cleared criminal background check and negative drug test result. Big Bonus Points if you Have: Hydraulic/Hydrologic Modeling and/or Design skills. WWTP project experience. Willingness / Ability to grow into a Management position performing as a Seller/Doer Relationships in the industry (WWTP) Self-motivated with an entrepreneurial spirit. Excellent problem-solving skills. Motivated to learn and develop your career path. Sound functional/technical skills in the role. Job Overview: We are seeking an experienced Water/Wastewater Treatment PE/PM. This is a critical role in a very fast-growing business unit to provide design and plan production support of civil engineering (water/wastewater) design projects. Essential Job Responsibilities: Fulfill engineering duties for the design, permitting, and construction administration of Water/Wastewater Treatment Facility projects. Preparation of accurate presentations, process evaluation, design, details, and construction documents. Knowledge and/or understanding treatment process modeling and overall process hydraulics. Oversight of project design teams, including engineers, designers, consultants, and clients. Review and perform QA/QC of designs for W/WW Treatment projects. Coordination and collaboration with firm disciplines, other project engineers or project managers. Research, interpretation and ensuring implementation of relevant codes, treatment process requirements, client requirements, standards, and templates. Preparation of specifications, review of shop drawings, and construction administration support. Periodic travel to perform business development and project management tasks. Duty includes preparation or review of subsequent reports and exhibits. Oversight and assistance with compiling documents/construction plans from all disciplines and submittal to agencies having jurisdiction. Oversight of project quality control implementation. Weekly coordination with and reporting to manager regarding project/program performance with respect to quality, status, schedule, and budget. WHAT WE OFFER: Join a company that puts its employees first: Employee Stock Ownership Plan (ESOP): All employees are owners & benefit from profits earned Competitive pay + paid holidays, bereavement and parental, medical, and military leave Multiple office locations to work from: Stick close to home or travel for a change of scenery Growth opportunities & training: Grow confidently in your career with our mentoring & training options Professional development: Tuition reimbursement, early career professional program, online courses & more Work that makes a difference: See the direct impact your work has on our communities Collaborative, supportive team: People to help you solve problems, cheer successes & encourage you along the way Job Requisition #39381 #LI-RS1 #Civil #Hybrid A reasonable estimate of the Base Salary for this role is $110,000 - $140,000 per year. The disclosed pay range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. The compensation decisions are dependent on the facts and circumstances of each case, such as skills and experience levels.

General Purpose: Perform all aspects of sampling, monitoring and testing required to maintain compliance with Federal State and Local regulations governing the wastewater treatment process, and storm water and sludge management. Perform other tasks as assigned. Role qualifications: Employee will need to be able to: Lift and stack 50 pounds Work at a fast pace for up to 3 hours at a time Work in a warm, dusty environment for extended periods. Work in a cold, moist environment for extended periods. Push and/or Pull heavy objects Tolerate the sight of continuous moving objects Walk up and down multiple flights of stairs multiple times daily. Have no fear of Heights. Climb up and down ladders Be around chemical for extended periods Work responsibilities: Be able to perform and document various tests required by State and Federal agencies for the processing plant. Perform daily checks of the wastewater treatment process and periodic checks of pump stations. Have a working knowledge of the operation, methods and procedures of a wastewater treatment. Have a working knowledge of the machinery used for wastewater treatment and pumping stations. Have a thorough knowledge of mechanical equipment and the ability to diagnose and correct equipment malfunction. Have a working knowledge of basic machinery preventive maintenance and repair. Have a basic knowledge of State and Federal rules governing wastewater discharges and worker's safety. Have the ability to work with independence and to make routine decisions on the operation of the plant processes and equipment during the Waste Water Manager's absence. Essential Skills and Experience: Be dependable and honest. Time management: the ability to organize and manage multiple priorities Strong team player Commitment to company values Follow all safety rules and procedures. Operate or be trained to operate a forklift. Be able to work overtime when needed. Familiar with Lockout Tag out Nonessential Skills and Experience: Poultry experience Production Experience Plant Experience Physical Demands and work environment: The physical and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical demands: While performing the duties of the job, the employee is required to walk; sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; balance; stoop. Employee must occasionally lift and or move up to 50 pounds. Employee must be able to walk up and down multiple flights of stairs multiple times a daily. Specific vision abilities required by the job include close vision, color vision, depth perception and the ability to adjust focus. Work environment: While performing the duties of this job, the employee is exposed to weather conditions prevalent to the time. Employee will be working dusty environment. The noise level in the work environment is usually moderate to loud.

The Enviva team is driven by our shared vision for a renewable energy future. We are a fast-growing, purpose-driven, global energy company specializing in delivering sustainable wood bioenergy solutions. We are the world's largest producer of sustainable wood pellets, which provide a low-carbon alternative to fossil fuels. The Control Room Operator is responsible for monitoring the status of all plant systems on a continuous basis. The operator will respond to alarms by taking appropriate corrective actions and procedures and ensure that the plant meets its generating requirements while operating safely and efficiently. The operator will also monitor activities and ensure the smooth functioning of systems and equipment. To succeed in this role, these individuals require an understanding of control room operations, the ability to prepare accurate records, and a range of other technical and soft skills. Responsibilities Operate plant functions from the control room. Manage chip feed system, fuel feed system, furnace, dryer system, primary and secondary sizing and pellet presses. Act as overall contact for plant operations. Monitoring: Checking indicator screens and signal lights, and monitoring production rates and system statuses. Monitor spark detection equipment. Manage and monitor various levels and feed rated to ensure continuous plant operation. Adjusting: Translating signals into production realities and adjusting production line processes. Operate computers, monitors and corrects operational values. Maintaining: Maintaining working schedules, equipment temperature, and safety standards Resolving issues: Assess and adjust accordingly to criticality of potential malfunctions and equipment failures, and using technical skills to resolve problems Communicating: Communicating with team members and responding to calls for assistance. Multi-task with equipment alarms and radio commands/communication. Strong aptitude in math; ability to use addition, subtraction, multiplication and division to perform flow, pressure, performance and meter calculations Ability to work both independently and in a team environment Knowledge of generating unit operation, engineering, or maintenance practices Qualifications Ability to understand and follow written and verbal job instructions. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and written procedures. Be able to use basic hand tools. Must possess basic computer & math skills. Able to learn how to operate HMI touch screens. Preferred Qualifications - What Sets You Apart High school diploma or GED. Experience in wood products, furnace/dryer operations, or similar manufacturing environment High attention to detail. Ability to work under stressful conditions. Problem solving skills. Prior experience working in a Control Room Working conditions Must be able to work in outdoor environments and occasionally in temperatures above 100 degrees and below 32 degrees Willing and able to work in a hot, humid, cold and noisy industrial environment Willing and able to maintain strict adherence to safety rules and regulations, to include wearing safety equipment. Occasionally walk on slippery or uneven surfaces. Ability to work shift assignments up to 12 hours that include weekends, nights or rotating shifts. Physical requirements Willing and able to perform tasks such as lifting, walking, climbing, stooping, standing, pushing and/or pulling for up to twelve (12) hours a day Willing and able to work around moving equipment and machinery Willing and able to pull and lift, up to 50 lbs. Be comfortable climbing ladders, conveyors, working at heights and on steel grating. Ability to safely and successfully perform the essential job functions consistent with the ADA and other federal, state and local standards, including meeting qualitative and/or quantitative productivity standards. This position is not eligible for visa support. EEO Statement Enviva is dedicated to the principles of equal employment opportunity (EEO) in any term, condition or privilege of employment. Enviva does not discriminate against applicants or employees on the basis of race, color, creed, religion, sex, national origin, age, physical or mental disability, ancestry, marital status, sexual orientation, gender identity or expression, veteran status, uniform service member, genetic information or any other status protected by law. Enviva complies with applicable state and local laws governing nondiscrimination in employment in every location in which we operate.

Join our global leading business offering outstanding personal development & global career opportunities Be part of a group that is safety driven and values inclusion - Wilmington California For California based roles the expected hourly wage is $38.97 About the role Finding better ways to provide the materials the world needs We are looking for a Utility Operator (Probationary) to operate and monitor all equipment pertaining to the areas of the Spray Dry Operation, which includes Zinc Borate Fines Mill, charge-making and charge transferring equipment, and processing and packaging equipment. This is a great opportunity to Join an encouraging leadership group, committed to your growth and development while gaining knowledge and experience at our Wilmington operation. In addition to paying competitively and providing great benefits packages, we want you to live the lifestyle that is right for you and your family. And because of our size and scale, there are many opportunities to learn, grow and do more than you ever thought possible. Every hour of every shift, your safety and wellbeing is our number one priority. We do the work only if it is safe, and we invest to make sure every member of the team has the quality tools they need to do their job. Reporting to the Supervisor and working in a diverse team, you will be: Operate lift trucks and other equipment. Move and stage raw materials for plant use in appropriate areas. Perform minor maintenance on equipment as needed. Collect and submit samples to the lab, initiating corrective actions as required. Collect and record process data on appropriate forms. Complete packing slips accurately. Wash and clean process equipment according to prescribed standards. Ensure equipment operates correctly and safely, correcting unsafe or potentially damaging conditions. Contain and control spilled or dumped product to maximize recovery and minimize waste generation. Isolate and prepare equipment for maintenance/operations using LOTO methods and follow HSE work instructions and job procedures. Attend HSE training sessions, review work practices for HSE issues, and properly store and dispose of materials impacting the environment. Perform other duties as assigned What you'll bring A commitment to the safety of yourself and your team Valid driver's license and a high school diploma or equivalent Previous experience operating process equipment is desirable Mechanical aptitude required to make adjustments and minor repairs to equipment and instrumentation Ability to communicate clearly verbally and in writing Proficiency in basic math MSHA knowledge preferred Ability to perform work with accuracy and attention to detail What we offer We are committed to providing our employees with a generous benefits package. Be recognized for your contribution, your thinking, your hard work, and go home knowing you've helped the world progress, we provide: A safety-focused and inclusive working environment Access to top-tier family-friendly health programs including medical, prescription drug, dental, vision, life insurance coverage, and various voluntary benefits. 401(k) matching program (company matched .35 per dollar up to 5% of your base pay) Generous Rio Tinto employee share program, which allows you to purchase Rio Tinto Company shares. Comprehensive leave policies which cover all moments that matter in life: PTO (paid time off), paid holidays, and paid bereavement leave. A favourable child-caregiver leave program (Up to 100% salary top-up) Ongoing Employee Assistance Program (EAP) for you and your family; to help in addressing educational opportunities, addiction treatment, depression, stress, domestic issues, financial management, and legal concerns. Discount programs for leisure purposes and access to Virgin Pulse with incentives supporting your wellbeing. Where you'll be working This role is based in the Port of Los Angeles in the city of Wilmington, California. This historical site is one of the oldest operations in the Port of LA, some employees are third generation workers at this operation. The southern California area offers a vast array of activities for every lifestyle from camping, surfing, fishing, hiking, family parks, sports arenas, concerts and much more. About Rio Tinto Rio Tinto is a leading global mining and materials company. We operate in 35 countries where we produce iron ore, copper, aluminium, critical minerals, and other materials needed for the global energy transition and for people, communities, and nations to thrive. We have been mining for 150 years and operate with knowledge built up across generations and continents. Our purpose is finding better ways to provide the materials the world needs - striving for innovation and continuous improvement to produce materials with low emissions and to the right environmental, social and governance standards. But we can't do it on our own, so we're focused on creating partnerships to solve problems, create win-win situations and meet opportunities. Every Voice Matters Rio Tinto is committed to equal employment opportunity. All qualified applicants will be considered without regard to race, color, sex, age, religion, national origin, disability, or any other characteristic protected by federal, state, or local law. We are committed to an inclusive environment where people feel safe, respected and valued. We want our people to feel that all voices are heard and that a variety of perspectives are not only welcome but are essential to our success. We treat all our people fairly and with dignity. Rio Tinto participates in E- Verify to confirm work authorization. Please visit ******************** for more information.

At Dow, we believe in putting people first and we're passionate about delivering integrity, respect and safety to our customers, our employees and the planet. Our people are at the heart of our solutions. They reflect the communities we live in and the world where we do business. Their diversity is our strength. We're a community of relentless problem solvers that offers the daily opportunity to contribute with your perspective, transform industries and shape the future. Our purpose is simple - to deliver a sustainable future for the world through science and collaboration. If you're looking for a challenge and meaningful role, you're in the right place. Dow (NYSE: DOW) is one of the world's leading materials science companies, serving customers in high-growth markets such as packaging, infrastructure, mobility and consumer applications. Our global breadth, asset integration and scale, focused innovation, leading business positions and commitment to sustainability enable us to achieve profitable growth and help deliver a sustainable future. We operate manufacturing sites in 30 countries and employ approximately 36,000 people. Dow delivered sales of approximately $43 billion in 2024. References to Dow or the Company mean Dow Inc. and its subsidiaries. Learn more about us and our ambition to be the most innovative, customer-centric, inclusive and sustainable materials science company in the world by visiting ************ About you Dow has an exciting opportunity for a Pilot Plant Technician in Wilmington, DE! You are a self-starter who can identify, prioritize and accomplish multiple tasks. You can provide support to the operation of the Research & Development (R&D) Pilot Plant. You can work directly with engineers, scientists, leaders, and other technicians to ensure safe and proficient operation of the plants to deliver product samples and process information as requested in the planned experiments. Duties and Responsibilities Operate and field checks process equipment, and monitors process conditions, equipment, and control systems in a defined area. Perform tasks assigned to operations as per Master Task List (e.g. Field checks, equipment preparation, samples, etc.). Use trouble shooting skills to resolve process related deviations and problems, and understands how the assigned duties relate to others in the team and how the team integrates with other related teams. Monitor, collect, and input plant metrics for Statistical Process Control, asset utilization, conversion costs, production yields, and identifies opportunities for plant optimization Use process knowledge and skills to make improvements in plant performance and Operating discipline, including creating and improving job procedures. Write SWP's and perform lock out/tag out. Participate in Root Cause Investigations. Perform process upset/crisis response activities assigned by Pilot Plant Technologist. Demonstrate proficient application of Life Critical Standards, operate plant discipline and sets role model in safety culture. Complete all assigned training per facility training plan Move drums (55gal) and lift up to 50lbs Required qualifications: A minimum of a High School Diploma or GED is required and one of the following: An Associate's Degree or higher with emphasis in Process Technology, Chemistry, Biology, or similar technology related area. 4 or more years of relevant technical military experience/training. 3 or more years of work experience in a chemical facility operations role or other relevant industry experience. Willing and able to work shift schedule and 12 hour rotating shift Ability to work overtime and holidays as needed A minimum requirement for this U.S. based position is the ability to work legally in the United States. No visa sponsorship/support is available for this position, including for any type of U.S. permanent residency (green card) process. Preferred qualifications: You have 3 or more years of experience within chemical, manufacturing, oil/gas or industrial environment. The physical abilities, with or without reasonable accommodations, include: Wear safety equipment, such as earplugs, goggles, and steel-toed shoes Wear and use respirators Perform frequent bending, reaching, and lifting Work in tight or closed-in spaces Climb stairs/ladders and work high off the ground Stand or walk for extended periods of time Frequent/occasional lifting of material weighing approximately 50 pounds, including repositioning of full 55gal drums on pallets Your skills: Maintenance: Must have significant maintenance experience along with the ability to comfortably use hand tools. Mechanical Equipment: Mechanical aptitude and hands-on experience in running large-scale polymer compounding equipment preferred. Operations: Experience with operation of continuous, integrated chemical process pilot plants. Must also have experience in chemical process research and development or production support. Timeliness: Must be prompt and able to stick to the shift schedule. It is imperative that the candidate must be able to arrive to assigned shifts in a timely manner. Communication: Strong written and verbal communication skills. Good interpersonal skills. Computer Skills: Microsoft application expertise, to include Word, Excel, PowerPoint, and Outlook is required. Organizing, Planning, and Prioritizing Work: A self-starter who can identify, prioritize and accomplish multiple tasks. Time management: It is essential that the individual should have the ability to prioritize their workload depending on significance and deadline Note: relocation assistance is not provided with this position. Benefits - What Dow offers you We invest in you. Dow invests in total rewards programs to help you manage all aspects of you: your pay, your health, your life, your future, and your career. You bring your background, talent, and perspective to work every day. Dow rewards that commitment by investing in your total wellbeing. Here are just a few highlights of what you would be offered as a Dow employee: Equitable and market-competitive base pay and bonus opportunity across our global markets, along with locally relevant incentives. Benefits and programs to support your physical, mental, financial, and social well-being, to help you get the care you need...when you need it. Competitive retirement program that may include company-provided benefits, savings opportunities, financial planning, and educational resources to help you achieve your long term financial-goals. Employee stock purchase programs (availability varies depending on location). Student Debt Retirement Savings Match Program (U.S. only). Dow will take the value of monthly student debt payments and apply them as if they are contributions to the Employees' Savings Plan (401(k)), helping employees reach the Company match. Robust medical and life insurance packages that offer a variety of coverage options to meet your individual needs. Travel insurance is also available in certain countries/locations. Opportunities to learn and grow through training and mentoring, work experiences, community involvement and team building. Workplace culture empowering role-based flexibility to maximize personal productivity and balance personal needs. Competitive yearly vacation allowance. Paid time off for new parents (birthing and non-birthing, including adoptive and foster parents). Paid time off to care for family members who are sick or injured. Paid time off to support volunteering and Employee Resource Group's (ERG) participation. Wellbeing Portal for all Dow employees, our one-stop shop to promote wellbeing, empowering employees to take ownership of their entire wellbeing journey. On-site fitness facilities to help stay healthy and active (availability varies depending on location). Employee discounts for online shopping, cinema tickets, gym memberships and more. Additionally, some of our locations might offer: Transportation allowance (availability varies depending on location) Meal subsidiaries/vouchers (availability varies depending on location) Carbon-neutral transportation incentives e.g. bike to work (availability varies depending on location) Join our team, we can make a difference together. About Dow Dow (NYSE: DOW) is one of the world's leading materials science companies, serving customers in high-growth markets such as packaging, infrastructure, mobility and consumer applications. Our global breadth, asset integration and scale, focused innovation, leading business positions and commitment to sustainability enable us to achieve profitable growth and help deliver a sustainable future. We operate manufacturing sites in 30 countries and employ approximately 36,000 people. Dow delivered sales of approximately $43 billion in 2024. References to Dow or the Company mean Dow Inc. and its subsidiaries. Learn more about us and our ambition to be the most innovative, customer-centric, inclusive and sustainable materials science company in the world by visiting ************ As part of our dedication to inclusion, Dow is committed to equal opportunities in employment. We encourage every employee to bring their whole self to work each day to not only deliver more value, but also have a more fulfilling career. Further information regarding Dow's equal opportunities is available on ************ Dow is an Equal Employment Opportunity employer and is committed to providing opportunities without regard for race, color, religion, sex, including pregnancy, sexual orientation, or gender identity, national origin, age, disability and genetic information, including family medical history. We are also committed to providing reasonable accommodations for qualified individuals with disabilities and disabled veterans in our job application procedures. If you need assistance or an accommodation due to a disability, you may call us at 1-833-My Dow HR ************** and select option 8.

POSITIONS AVAILABLE: 1 PRIMARY FUNCTION: Position is responsible for the efficient management of assigned plant and operations. This position has direct responsibility for personnel, equipment, scheduling, safety, quality, workmanship, and completion of assigned projects on time and within the estimated budget. This position may include duties within, but not be limited to: Asphalt Material, Equipment, Plant, and Electrical. ESSENTIAL DUTIES: 1.) Supervise and direct crew to assure completion of assigned project as instructed by the superintendent and/or other manager. Includes human resources and employee related matters. 2.) See that new personnel receive proper orientation to acquaint them with company policies, safety requirements, and job responsibilities. 3.) Conduct periodic evaluation of assigned personnel with special emphasis on their contribution to the company and our contribution to them. 4.) Assist and direct crews in proper use of equipment, improving job performance, controlling cost and quality of work, increasing productivity, improving communication and housekeeping on project. 5.) Perform equipment inspections, request maintenance and repairs as needed. 6.) Order materials as needed for the project or operation of the plant. 7.) Monitor assigned personnel and maintain regular work hours. Maintain daily payroll records and log hours worked for each employee assigned to you. 8.) Complete all required daily reports, verify their accuracy and transmit promptly to the supervisor. 9.) Ensure all work complies with OSHA, MSHA, local laws, ordinances, and EPA regulations. 10.) Ensure all work is performed with an emphasis on safety. Insist upon compliance of all safety regulations. Conduct daily huddle meetings with safety as the primary agenda. 11.) Maintain good relations with the general public, engineers, architects, inspectors and customers to facilitate job progress and to promote a positive company image. Develop a courteous and considerate attitude toward these groups. 12.) Work long, flexible hours as demanded by our customers including nights, weekends, and work outside for extended periods during all seasons of the year. 13.) Perform necessary work while complying with all company policies and procedures. 14.) Perform additional duties as required in the operations of the project or plant, or as directed by the supervisor. 15.) Must have regular and predictable attendance. MINIMUM REQUIREMENTS: Education: Must be a minimum of 21 years old Work Experience: Minimum of 3 years' experience in asphalt plant operations Experience with NCDOT requirements Physical Demands: Light physical effort required including pulling and lifting or moving materials up to 20 pounds. If a position specific Physical Demands sheet is attached, it will describe in more detail the physical demands that are required. Physical Activity: Position requires the ability to continuously work around noise, dust, heat, cold, oil, and heavy equipment. Personal protective equipment may be required. Position requires ability to exchange ideas quickly and clearly and the ability to receive and evaluate detailed information and instructions. The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required of the position. All employees may have other duties assigned at any time. EOE. Minorities/Women/Protected Veterans/Individuals with Disabilities.

Barnhill Contracting Company's success is built on the values, principles and vision of the man - Robert E. Barnhill, Sr. - whose name we proudly bear. Robert Barnhill built this company on a foundational belief that there is power in people. He was a motivator. A hard worker. A leader of leaders. His passion for people and his firm belief in the Golden Rule - treating others as you want to be treated - still drive us today. We are firm, flexible and honest. We do the right thing, every single time. We empower our leaders in the field to be decision makers. We are easy to work with - a core philosophy that is both intentional and deliberate. One that requires discipline. Grit. All of these qualities, along with our founder's vision, have helped grow Barnhill Contracting Company into one of the Southeast's leading contractors. Our success is built from the dedicated service of each and every one of our employees. Construction is hard work - long hours and immense pressure to meet critical deadlines - and we are proud to employ the most talented group of people in the industry. When you join the Barnhill team, you become part of the Barnhill Family. Job Description: Perform general labor duties including a designated spotter for trucks and equipment on an asphalt paving lay down crew or grading crew. Job Duties & Responsibilities: Performs various unskilled task which are associated with asphalt paving and/or grading operations. This includes but not limited shoveling asphalt, stone or dirt. Uses various tools such as a shovel, rake, lute, broom, pick, hammer, saw, pneumatic hammer, drill, tamp and concrete saw. May operate a farm type tractor with power broom attachment. Perform duties of the designated spotter of which training will be conducted. Minimum Qualifications & Training: One year experience but will train the right person Encourage a valid NC Drivers License Willingness to learn multiple task Ability to abide by precise instructions and strict but necessary safety rules and policies. Maintain a good attendance and safety record. Ability to work weekends and some nights. Tasks Essential to Job Functions: The job requires the following motions: standing, walking, stretching, bending, lifting, pulling, twisting, throwing, reaching and squatting. Requires regular lifting of or in excess of 25 pounds and occasionally up to 100 pounds. Walking and standing may require a full day of 12 to 15 hours. Will be exposed to sometimes extreme hot and cold temperatures. Job requires riding to and from work. If the driving of a company vehicle is required, then the guidelines of the company driver qualifications standards must be met. What We Offer: Choice of Health Insurance options (BCBSNC) Dental Vision Short Term Disability Insurance Long Term Disability Insurance Life Insurance Paid Time Off Holiday Pay Weather Related Pay 401(k) and Profit Sharing CareOne (EAP) Corporate Chaplains of America Barnhill Contracting Company is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Job Description PRIMARY FUNCTION: Position is responsible for the efficient management of assigned plant and operations. This position has direct responsibility for personnel, equipment, scheduling, safety, quality, workmanship, and completion of assigned projects on time and within the estimated budget. This position may include duties within, but not be limited to: Asphalt Material, Equipment, Plant, and Electrical. ESSENTIAL DUTIES: 1.) Supervise and direct crew to assure completion of assigned project as instructed by the superintendent and/or other manager. Includes human resources and employee related matters. 2.) See that new personnel receive proper orientation to acquaint them with company policies, safety requirements, and job responsibilities. 3.) Conduct periodic evaluation of assigned personnel with special emphasis on their contribution to the company and our contribution to them. 4.) Assist and direct crews in proper use of equipment, improving job performance, controlling cost and quality of work, increasing productivity, improving communication and housekeeping on project. 5.) Perform equipment inspections, request maintenance and repairs as needed. 6.) Order materials as needed for the project or operation of the plant. 7.) Monitor assigned personnel and maintain regular work hours. Maintain daily payroll records and log hours worked for each employee assigned to you. 8.) Complete all required daily reports, verify their accuracy and transmit promptly to the supervisor. 9.) Ensure all work complies with OSHA, MSHA, local laws, ordinances, and EPA regulations. 10.) Ensure all work is performed with an emphasis on safety. Insist upon compliance of all safety regulations. Conduct daily huddle meetings with safety as the primary agenda. 11.) Maintain good relations with the general public, engineers, architects, inspectors and customers to facilitate job progress and to promote a positive company image. Develop a courteous and considerate attitude toward these groups. 12.) Work long, flexible hours as demanded by our customers including nights, weekends, and work outside for extended periods during all seasons of the year. 13.) Perform necessary work while complying with all company policies and procedures. 14.) Perform additional duties as required in the operations of the project or plant, or as directed by the supervisor. 15.) Must have regular and predictable attendance. MINIMUM REQUIREMENTS: Education: Must be a minimum of 21 years old Work Experience: Minimum of 3 years' experience in asphalt plant operations Experience with NCDOT requirements Physical Demands: Light physical effort required including pulling and lifting or moving materials up to 20 pounds. If a position specific Physical Demands sheet is attached, it will describe in more detail the physical demands that are required. Physical Activity: Position requires the ability to continuously work around noise, dust, heat, cold, oil, and heavy equipment. Personal protective equipment may be required. Position requires ability to exchange ideas quickly and clearly and the ability to receive and evaluate detailed information and instructions. The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required of the position. All employees may have other duties assigned at any time. EOE. Minorities/Women/Protected Veterans/Individuals with Disabilities.

Barnhill Contracting Company's success is built on the values, principles and vision of the man - Robert E. Barnhill, Sr. - whose name we proudly bear. Robert Barnhill built this company on a foundational belief that there is power in people. He was a motivator. A hard worker. A leader of leaders. His passion for people and his firm belief in the Golden Rule - treating others as you want to be treated - still drive us today. We are firm, flexible and honest. We do the right thing, every single time. We empower our leaders in the field to be decision makers. We are easy to work with - a core philosophy that is both intentional and deliberate. One that requires discipline. Grit. All of these qualities, along with our founder's vision, have helped grow Barnhill Contracting Company into one of the Southeast's leading contractors. Our success is built from the dedicated service of each and every one of our employees. Construction is hard work - long hours and immense pressure to meet critical deadlines - and we are proud to employ the most talented group of people in the industry. When you join the Barnhill team, you become part of the Barnhill Family. Job Description: Perform general labor duties including a designated spotter for trucks and equipment on an asphalt paving lay down crew or grading crew. Job Duties & Responsibilities: Performs various unskilled task which are associated with asphalt paving and/or grading operations. This includes but not limited shoveling asphalt, stone or dirt. Uses various tools such as a shovel, rake, lute, broom, pick, hammer, saw, pneumatic hammer, drill, tamp and concrete saw. May operate a farm type tractor with power broom attachment. Perform duties of the designated spotter of which training will be conducted. Minimum Qualifications & Training: One year experience but will train the right person Encourage a valid NC Drivers License Willingness to learn multiple task Ability to abide by precise instructions and strict but necessary safety rules and policies. Maintain a good attendance and safety record. Ability to work weekends and some nights. Tasks Essential to Job Functions: The job requires the following motions: standing, walking, stretching, bending, lifting, pulling, twisting, throwing, reaching and squatting. Requires regular lifting of or in excess of 25 pounds and occasionally up to 100 pounds. Walking and standing may require a full day of 12 to 15 hours. Will be exposed to sometimes extreme hot and cold temperatures. Job requires riding to and from work. If the driving of a company vehicle is required, then the guidelines of the company driver qualifications standards must be met. What We Offer: Choice of Health Insurance options (BCBSNC) Dental Vision Short Term Disability Insurance Long Term Disability Insurance Life Insurance Paid Time Off Holiday Pay Weather Related Pay 401(k) and Profit Sharing CareOne (EAP) Corporate Chaplains of America Barnhill Contracting Company is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

PRIMARY FUNCTION: Position is responsible for the efficient management of assigned plant and operations. This position has direct responsibility for personnel, equipment, scheduling, safety, quality, workmanship, and completion of assigned projects on time and within the estimated budget. This position may include duties within, but not be limited to: Asphalt Material, Equipment, Plant, and Electrical. ESSENTIAL DUTIES: 1.) Supervise and direct crew to assure completion of assigned project as instructed by the superintendent and/or other manager. Includes human resources and employee related matters. 2.) See that new personnel receive proper orientation to acquaint them with company policies, safety requirements, and job responsibilities. 3.) Conduct periodic evaluation of assigned personnel with special emphasis on their contribution to the company and our contribution to them. 4.) Assist and direct crews in proper use of equipment, improving job performance, controlling cost and quality of work, increasing productivity, improving communication and housekeeping on project. 5.) Perform equipment inspections, request maintenance and repairs as needed. 6.) Order materials as needed for the project or operation of the plant. 7.) Monitor assigned personnel and maintain regular work hours. Maintain daily payroll records and log hours worked for each employee assigned to you. 8.) Complete all required daily reports, verify their accuracy and transmit promptly to the supervisor. 9.) Ensure all work complies with OSHA, MSHA, local laws, ordinances, and EPA regulations. 10.) Ensure all work is performed with an emphasis on safety. Insist upon compliance of all safety regulations. Conduct daily huddle meetings with safety as the primary agenda. 11.) Maintain good relations with the general public, engineers, architects, inspectors and customers to facilitate job progress and to promote a positive company image. Develop a courteous and considerate attitude toward these groups. 12.) Work long, flexible hours as demanded by our customers including nights, weekends, and work outside for extended periods during all seasons of the year. 13.) Perform necessary work while complying with all company policies and procedures. 14.) Perform additional duties as required in the operations of the project or plant, or as directed by the supervisor. 15.) Must have regular and predictable attendance. MINIMUM REQUIREMENTS: Education: Must be a minimum of 21 years old Work Experience: Minimum of 3 years' experience in asphalt plant operations Experience with NCDOT requirements Physical Demands: Light physical effort required including pulling and lifting or moving materials up to 20 pounds. If a position specific Physical Demands sheet is attached, it will describe in more detail the physical demands that are required. Physical Activity: Position requires the ability to continuously work around noise, dust, heat, cold, oil, and heavy equipment. Personal protective equipment may be required. Position requires ability to exchange ideas quickly and clearly and the ability to receive and evaluate detailed information and instructions. The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required of the position. All employees may have other duties assigned at any time. EOE. Minorities/Women/Protected Veterans/Individuals with Disabilities.

Job Description POSITIONS AVAILABLE: 1 PRIMARY FUNCTION: Perform general construction tasks involving physical labor at construction projects and plants. May operate hand and power tools of all types: Air hammers, small mechanical hoists, surveying and measuring equipment, and a variety of other equipment and instruments. May clean and prepare sites, dig trenches, set braces for support, erect scaffolding, cleaning up rubble and debris. ESSENTIAL DUTIES: Asphalt Plant - Yardman Operate jackhammers, drills and other power tools as required. Position, join, align, and seal structural components. Shovel materials. Signal equipment operators to facilitate alignment, movement, and adjustment of machinery, equipment, and materials. Spray materials such as water, sand, steam, or paint through hoses to clean, coat, or seal surfaces. Tend machines that pump asphalt & etc. Tend pumps, compressors, and generators to provide power for tools, machinery, and equipment, or to heat and move materials such as asphalt. Lubricate, clean, and repair machinery, equipment, and tools. Apply caulking compounds by hand or using caulking guns. Clean and prepare sites to eliminate possible hazards. Control traffic passing near, in, and around work area. Erect and disassemble scaffolding, shoring, braces, ramps, and other temporary structures. Load, unload building materials, machinery, and tools. Mix ingredients to create compounds for covering or cleaning surfaces. Learn and follow safety regulations. Work long, flexible hours as demanded by our customers including nights, weekends, and work outside for extended periods during all seasons of the year.1 Perform additional duties as required or directed by their immediate supervisor or other manager. Must have regular and predictable attendance. MINIMUM REQUIREMENTS: Education: High school diploma or GED preferred. Must be a minimum of 18 years old. Work Experience: Ability to communicate problems based on the many variables of the project. Prioritize and handle multiple tasks at once. Other: Dependable transportation to the plant location is required. Must be willing to work nights. Must have the willingness and be available to work long hours or weekends if required. Must be dependable with a good work ethic. Must not be afraid of heights. Must be willing to follow directions and learn. Room for advancement with training. Heavy Physical Demands: Heavy physical effort required including pulling and lifting or moving heavy weight material with frequent lifting or moving materials or equipment (over 80 pounds). If a position specific Physical Demands sheet is attached, it will describe in more detail the physical demands that are required. Physical Activity: Position requires the ability to continuously work around any or all of the following: noise, dust, heat, cold, oil and heavy equipment. Personal protective equipment is normally required of the position. Position requires ability to exchange ideas quickly and clearly and the ability to receive and evaluate detailed information and instructions. The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required of the position. All employees may have other duties assigned at any time. EOE. Minorities/Women/Protected Veterans/Individuals with Disabilities.

POSITIONS AVAILABLE: 1 PRIMARY FUNCTION: Perform general construction tasks involving physical labor at construction projects and plants. May operate hand and power tools of all types: Air hammers, small mechanical hoists, surveying and measuring equipment, and a variety of other equipment and instruments. May clean and prepare sites, dig trenches, set braces for support, erect scaffolding, cleaning up rubble and debris. ESSENTIAL DUTIES: Asphalt Plant - Yardman Operate jackhammers, drills and other power tools as required. Position, join, align, and seal structural components. Shovel materials. Signal equipment operators to facilitate alignment, movement, and adjustment of machinery, equipment, and materials. Spray materials such as water, sand, steam, or paint through hoses to clean, coat, or seal surfaces. Tend machines that pump asphalt & etc. Tend pumps, compressors, and generators to provide power for tools, machinery, and equipment, or to heat and move materials such as asphalt. Lubricate, clean, and repair machinery, equipment, and tools. Apply caulking compounds by hand or using caulking guns. Clean and prepare sites to eliminate possible hazards. Control traffic passing near, in, and around work area. Erect and disassemble scaffolding, shoring, braces, ramps, and other temporary structures. Load, unload building materials, machinery, and tools. Mix ingredients to create compounds for covering or cleaning surfaces. Learn and follow safety regulations. Work long, flexible hours as demanded by our customers including nights, weekends, and work outside for extended periods during all seasons of the year.1 Perform additional duties as required or directed by their immediate supervisor or other manager. Must have regular and predictable attendance. MINIMUM REQUIREMENTS: Education: High school diploma or GED preferred. Must be a minimum of 18 years old. Work Experience: Ability to communicate problems based on the many variables of the project. Prioritize and handle multiple tasks at once. Other: Dependable transportation to the plant location is required. Must be willing to work nights. Must have the willingness and be available to work long hours or weekends if required. Must be dependable with a good work ethic. Must not be afraid of heights. Must be willing to follow directions and learn. Room for advancement with training. Heavy Physical Demands: Heavy physical effort required including pulling and lifting or moving heavy weight material with frequent lifting or moving materials or equipment (over 80 pounds). If a position specific Physical Demands sheet is attached, it will describe in more detail the physical demands that are required. Physical Activity: Position requires the ability to continuously work around any or all of the following: noise, dust, heat, cold, oil and heavy equipment. Personal protective equipment is normally required of the position. Position requires ability to exchange ideas quickly and clearly and the ability to receive and evaluate detailed information and instructions. The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required of the position. All employees may have other duties assigned at any time. EOE. Minorities/Women/Protected Veterans/Individuals with Disabilities.