Press operator jobs in Alton, TX - 1,383 jobs

The following position is responsible for the grinding process in the manufacturing cycle. The work assigned is based upon the individual's training, experience, and ability. The roll grinder is expected to perform the requirements of the job per the Standard Operating Procedures and specific job Instructions recorded on the job router. The Supervisor may assign specific equipment or other tasks at the supervisor's discretion. Job Duties: Reading and interpreting production schedules, job router cards, blueprints, non-conformance reports, and any other materials that summarize requirements for the grinding of rubber rolls. Locating and retrieving rolls to the grinding production area utilizing overhead cranes and various materials handling equipment. Preparing the individual rolls for installation in the grinding equipment, utilizing knives to trim back rubber from the rollers prior to installing the rollers into the equipment, cleaning steel surfaces of rollers using hand or mechanical equipment, cleaning steel surfaces of rollers using hand or mechanical equipment, such as die-grinders or sheet abrasive/polishing materials. Setting the grinding equipment, installing special grinding wheels or attachments, adjusting and setting tooling on tool posts, installing live-centers, chucks centers, extensions, dogs, etc. Aligning the rollers in the equipment to meet all dimensional requirements of job order. This includes adjustment for taper, TIR, roller surface finish, and finish dimensions. Measure all required dimensions and understand the relationship of the dimensions to the specific requirements of the job. Utilize all inspection and measurement equipment per procedure and instruction, including durometer gauges, pi-tapes, P&J gauges, micrometers, vernier diameter tapes, dial indicators, profilometers, temperature-indicating devices, and others as needed. Complete the grinding operation and inspect the finished product to ensure that all requirements are met. Complete all necessary paperwork, inspection reports, job router information, and operator sign-off on job. Clean all metal and rubber surfaces prior to protective wrapping. Unload the grinding equipment safely and without damage or harm to personnel, equipment or finished product. Deliver the finished product to a designated storage area or shipping container. Safely operate the grinding equipment to produce the desired results and meet the specific job requirement. Maintain a clean work environment, floors swept, supplies properly stored, equipment cleaned and well maintained. Other duties as assigned by supervisor. Qualifications: Language Skills Read, write, and understands English. Read mechanical blueprints and interpret technical documents. Write legible documentation conforming to prescribed style and format. Communicates effectively. Mathematical Skills Utilize all inspection and measurement equipment per procedure and instruction, including Durometer gauges, Micrometers, Vernier diameter tapes, Dial indicators, Profilometers, temperature-indicating devices, and others as needed. Understands/applies basic math, including accurate addition, subtraction, multiplication, and division. Other Skills Learn and utilize safe operating procedures. Strong reasoning ability. Physical Requirements: Stand, bend, and stooping for extended periods of time. Reaches by extending hand(s) or arm(s) in any direction. Ability to exert up to 50 pounds of force, and/or up to 25 pounds of force frequently. Required ability to use finger and hand dexterity to manipulate objects and lift 50 pounds. Vision ability within normal parameters. Hearing within normal range. Coordination to step over and maneuver around obstacles. Demonstrates safe operating habits. Education and Experience: High school diploma, GED, or high school equivalency #IND Maxcess is an equal employment opportunity employer. We do not discriminate on the basis of race, religion, sex, disability, age, pregnancy, national origin, sexual orientation, or any other characteristic protected by applicable law. We are committed to diversity and inclusion, and all qualified candidates are encouraged to apply.

Job Title:Laser Punch Press Operator- 2nd Shift Company:Munters Corporation About Us: Munters is a global leader in climate solutions for mission-critical processes. We offer innovative, efficient and sustainable solutions for customers in industries where controlling indoor humidity, temperature and energy efficiency is mission-critical. Climate control systems often account for a large percentage of the energy consumption in many of our customers'operations. With an optimal climate system, we can help them to more efficiently use energy or waterresources and thereby reduce their climate and environmental impact. Sustainability is an important part of Munters' business strategy and value creation.We pride ourselves on fostering a dynamic and inclusive work environment where interns are valued members of the team and are given meaningful projects to work on. Scope: Perform duties setup and operate punch press to cut, specified metal sheets to defined specifications and set and operate a range of metal fabrication equipment to cut, notch, and shape metal parts, working within the limits of standard or accepted practice. Essential Duties: Work from job packets, bill of materials (BOM), blueprints, drawings, and/or production schedule. Perform machine startup and shutdown procedures on punch press equipment. Position work piece onto table with hands or crane, using vacuum system to hold piece in place. Layout cuts on computer and select tooling according to thickness and type of metal. Interpret job information to determine specific material requirements. Layout operations to maximize material utilization. Label completed parts with appropriate part number. Remove chips and drop from parts and staging table. Determine sequence of operation for each process and edit program based on sequence. Rack and move pieces to staging area. Verify conformance of first piece to specifications using calipers, protractors, gauges, and measuring tape. Gauge work pieces randomly through run to ensure maintenance of settings and make adjustments as necessary. Perform quality checks, complete check lists, verify counts, record time per job and ensure compliance with production schedules. Submit production documentation as required. Stage completed parts for movement or move to subsequent operations to maintain workflow. Maintain a clean and safe work area. Take responsibility for the physical inventory of materials. Request material reorders as necessary. Other Duties: Perform or assist with any operations, as required to maintain workflow and to meet schedules and quality requirements. Maintain work areas in a clean and orderly condition. Consistently operate in keeping with all safety rules and requirements. Participate in any variety of meetings and work groups to integrate activities, communicate issues, obtain approvals, resolve problems, and maintain specified level of knowledge pertaining to new developments, requirements, and policies. Perform other related duties as assigned. Tools and Equipment: Use hand tools, tape measure, calipers, protractors, cranes, forklift, carts, pallets, computer, fiber laser cutting machine, pneumatic tools, and protective devices. Minimum Personal Protection Equipment (PPE): Safety Glasses - ANSI Z87.1 Gloves- ANSI Cut 3 4544 Sleeves- ANSI Cut 3 4544 Foot Protection, Steel Toe - ASTM F2413-11 Ear protection Physical Demand: Frequently push with up to 120 lbs. of force. Occasionally push and pull up to 50 lbs. Frequently lift and carry up to 40 lbs. Frequently stand, walk, bend, crouch, kneel, climb, maneuver, stoop, squat, grasp, and reach. Visual and aural acuity Frequently stand, walk, bend, crouch, kneel, climb, maneuver, stoop, squat, grasp, and reach. Benefits: Competitive Salary Comprehensive health, dental, and vision insurance plans Generous vacation and paid time off 401K retirement savings plan with employer matching Professional development opportunities, including tuition reimbursement, and conference attendance Company-sponsored social events and team-building activities State-of-the-art equipment and tools to support your work Equal Opportunity Employer: We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. All offers are contingent on a pre-employment drug test and background check, as applicable for the position. #HPMUNTERS

Adecco is hiring immediately for Machine Operators in Northeast El Paso, Texas. ** Please see special notes at the bottom of this advertisement. They are very important. While working as a Machine Operator for Adecco, you will earn $10.75 - $14.00 an hour, depending on your department and shift. Overtime is absolutely available in these positions! These Machine Operators with Adecco enjoy some great benefits! Optional benefits with options such as medical, dental, vision, and 401(k) Weekly pay As an Adecco associate, you will be treated with respect and encouraged to further your career Optional forklift certification - ask me how! In this role, you will unload and process plastic coils (also known as reels) or plastic components from machines. You will be responsible for assisting technicians and shift leads in start-up of lines as required You will determine if product is usable or scrap by interpreting basic test results using visual work instructions. Requirements: This position is entry level Must be able to follow verbal and written instructions Ability to stand for an entire shift and walk around the warehouse (all shifts are 12-hour shifts - 4 days per week, rotating 3 days per week) Previous warehouse experience is preferred - for extrusion department, it is a must that you have experience operating machinery in a warehouse (not heavy equipment, but warehouse production machinery) We have multiple shifts available, and we can help you choose the best shift to fit your schedule! For instant consideration for this Warehouse Machine Operator job in El Paso, TX, click on Apply Now! NOTE: Due to the high volume of applications, an appointment is a must - we are not seeing people on a walk-in basis until February. We are happy to assist you during your appointment time. Steel-toed shoes are a requirement of all open positions. It is highly recommended that you wear steel-toed shoes for your interview, in the event that you have an on-the-spot interview with the supervisor. It is possible that we will walk the warehouse. Pay Details: $10.75 to $14.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

McGough is a respected partner that brings six generations of experience to high profile, unique and complex construction projects. We take great pride in our people and their extraordinary expertise in planning, development, construction and facility management. McGough employee tenure reflects the commitment and pride we share in our work. Ask anyone who knows us - the caliber of our people sets us apart. OPERATOR McGough Construction is hiring for operating engineers who are certified in Rough Terrain Forklifts and/or hold the CCO certification for Mobile Hydro-Cranes and Tower Cranes. This is a full-time hourly position with union pay scales per regional location. Job Responsibilities: Major functions include running rough terrain forklifts, mobile hydro-cranes, and tower cranes. Job Qualifications: This position is physically demanding with the large majority of work in outdoor conditions.

The Robotic Welder Operator works with little or no instruction in performing robotic welding of steel in various shapes, sizes, and thicknesses as needed for projects. Duties and Responsibilities: Programs, sets-up, and operates robotic welder. Builds or modifies tooling for product and new design. Complete fit-up of structure, pipe and accessories for vessels. Welds in multiple positions. Trains and mentor others. Identify various metals and alloys such as mild & high strength steel, aluminum, and stainless as well as identify structural shapes. Use measuring devices and gauges to determine thickness and size of metal. Use oxygen/acetylene torch for cutting metals. Use grinder and other hand or power tools required to grind, bevel, or fit metals together, and remove slag. Read and follow blueprints to determine structure or fit of parts that are being welded and are in compliance with the Method of Production Standard. Maintain work area and equipment in a clean orderly condition and follow prescribed safety procedures. May perform other duties as assigned. Skills and Specifications: Good knowledge of welding procedures, practices, symbols, and techniques required to weld and/or fuse metals together. Skilled ability to use hand and power tools associated with welding, such as chipping hammer, grinder, arc welder, and oxygen/acetylene torch including setup or connection of hoses, cords, and regulators. Accomplished ability to read and comprehend blueprints and/or sketches. Demonstrated proficiency with computers. Knowledge and ability to use common measuring instruments and hand tools such as tape measure, level, square, file or rasp. Solid problem-solving skills. Ability to contribute and work in a team environment. Ability to demonstrate accuracy and thoroughness to ensure first quality of work. Ability to establish and maintain healthy working relationships with people in course of work. Willingness to work additional hours in order to meet tight deadlines. Ability to safely operate a forklift. Skills and Education: High School Diploma or GED with additional technical training in welding and machine operations. Proficient in both verbal and written English. Basic math comprehension: counting, arithmetic, interpreting numerical information such as ranges and an understanding of units of measure including metric system.

Job Description We are looking for a Machine Operator to join our team! To Apply: Click on the “apply” button to get started or apply in-person (240 E. 1st Street, La Feria, TX 78559) What We Offer: Work in a team-oriented environment where collaboration is a priority. Achieve your professional goals without sacrificing the balance between work and life. A comprehensive benefits package with options to choose what works best for you and your family. About the Role: As a Machine Operator with Best Block, you are responsible for: Safe Operation and Maintenance of a Sophisticated, Computerized, Manufacturing Machine Reporting All Needed Information to the Plant Manager Using Equipment and Tools to Manufacturing Specifications Taking Variety of Measurements to Monitor Process and Ensure Quality Production Machine Maintenance and Set-Up Cleaning the Machinery Operating a Forklift We Require: A Minimum of 1 Year of Manufacturing Experience. You Must Have Strong Mechanical Aptitude and Trouble-shooting Skills. A Working Knowledge of Electrical, Hydraulic, Power, Transmission, Pneumatic, and Control Systems. *Your offer may be contingent upon passing a drug test and physical exam for this role.*

Job DescriptionDescription: The E-Coat Operator must possess basic math, reading and writing skills and be committed to observe and follow all quality and safety procedures. He/She must have good time management and decision making skills. The ability to follow procedures correctly and inspect quality of work is of vital importance. Working well in teams from diverse backgrounds as both a leader and an individual contributor is required. Responsibilities: Inspects and loads parts on the E-Coat line Plugs and masks parts when necessary Full knowledge of "Traveler" information which includes flowing procedures Responsable for keeping track of counts and production paperwork Making sure that Travelers and any other pertinent information is passed along to the next station. Reports any non-conform parts to Quality Department immediately Works with lab on update of chemical and system specs. Assists the E-Coat Lead to make sure rectifier and PLC are set to standard. Qualifications and Experience: Continue to receive ongoing training provided which includes: On the job training, forklift, written and verbal training. Fully aware of Ecoat.us being a premier coating applicator for the HVAC, Oil & Gas, Aerospace, DOD, and General Industrial Markets. With over 180 Unique Processes available, we are able to help with all of your corrosion, abrasion, and weather-ability issues. Skills or Certifications: Full knowledge of Rectifier and PLC Has the ability to lift weights up to 50 lbs. Certified Forklift Driver Benefits: ecoat.us Holdings, LLC is pleased to offer a comprehensive benefit package including paid time off, medical, dental and vision insurance, short term disability, 401K with company match and a company paid life insurance policy. Requirements: Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Work is performed in a manufacturing environment which contains dust and material particles in the air. The noise level in the work environment is medium to loud and may require the use of hearing protection. Temperature in the facility id Cold/Hot at certain times of the year.

AERONES, a Global Leader in advanced Wind Turbine maintenance and robotics, is seeking a Wind Turbine Robotics Operator focused on Robotics services to join our U.S. Operations Team. This position is also known as Wind Field Technician. We specialize in cutting-edge robotic solutions that ensure safety, efficiency, and top-tier service for the wind energy industry. In this role, you'll have the opportunity to travel to wind farms across the country, with all accommodation and travel expenses fully covered by the Company. You will be performing inspections, maintenance, repairs, and upgrades on wind turbines - ensuring peak performance and safety standards are met. GWO Basic Safety Training (BST) and GWO Advanced Rescue Training (ART) Full certifications will be required to undertake the role. Job Tasks and Responsibilities: Maintenance and operation of robotic systems used for cleaning, inspection, and repair of wind turbines. Performing routine inspections on turbines to ensure optimal performance and compliance with safety standards. Preventative maintenance on wind turbines and associated systems to reduce downtime and maximize energy production. Fault diagnosis and resolution of technical issues using advanced diagnostic tools and technology. Reporting and documentation of work completed, including identifying issues, repairs, and maintenance performed. Ensuring adherence to safety protocols and industry standards. What We Offer: Stable, long term employment with career growth in a rapidly expanding, innovative Company Competitive hourly rate: $22.50 - $30.00 per hour (based on experience) $60 a day meal per diem Paid travel and lodging for Projects nationwide Work with a Global Team pioneering the future of wind turbine technology What We're Looking For: Strong mechanical and electrical troubleshooting skills Ability to travel frequently and work in Field conditions Previous experience in wind turbine maintenance is an advantage Requirements The minimum requirements to be considered for this role include: Applicants must be legally authorized to work in the United States. We are unable to sponsor Visas at this time. A Valid Drivers License Basic Computer skills Willing and able to undertake a Physical Check (Medical) to ensure ability to undertake the responsibilities of the role (working in confined spaces, climbing, lifting etc). Nice to have: GWO Basic Safety Training (BST) GWO Advanced Rescue Training (ART) Full GWO Basic Technical Training (BTT) OSHA 10 NFPA 70E Electrical safety awareness First Aid GE / Vestas / Siemens Gamesa / Nordex Turbine Operations / LOTO GWO Sea Survival Benefits We believe great work starts with feeling valued and supported. That's why we are building an thoughtful, competitive benefits and perks to help you thrive - professionally and personally - through every step of your Career with us. You will be eligible for: Health Insurance Medical (80% Employer contribution) Dental Vision Term Life Paid Time Off (PTO) - 10 days Aerones is an Equal Opportunity Employer. We are committed to creating a diverse and inclusive workplace and consider all qualified applicants for employment without regard to Race, Color, Religion, Sex, Sexual Orientation, Gender Identity or Expression, National origin, Age, Disability, Veteran Status, or any other legally protected status. Employment decisions are based on qualifications, merit, and business needs. AERONES - Build the Future!

JOB TITLE: Robot Fitter / Operator DEPARTMENT: Manufacturing PAY: $24/hr BENEFITS: Benefits include a full health insurance policy that is 100% covered by Prime, a 50% matching 401(k) package, and a $25,000 life insurance policy. Comprehensive dental, vision and supplemental life insurance options are also available. PTO is available after 1 year. 8 paid holidays. SUMMARY: Our Robot Fitter is responsible for facilitating the completion of steel structures in compliance with blueprints/pre-engineered drawings for the robotic welding machines. DUTIES AND RESPONSIBILITIES: Efficiently read and interpret blueprints. Lay out and position metal designs for completion. Heats, forms, and dresses metal parts with the use of welding equipment. Add stiffeners, brackets, face plates, etc. using prints for location prior to finish welding. Maintains a safe, clean working environment. Hold required configurations or positions for welding by a tack-weld, heat-bend, clamp, hold, or grind. Proficient within a team environment. Works in correlation with the robot operators and has basic knowledge of pendant operations. Comprehends how to use measuring equipment. Performs other related duties as assigned by management. QUALIFICATIONS: Must be able to pass 1G weld test. Prior experience in manufacturing/fabrication shop is preferred but not required. Ability to work with minimal supervision. Ability to understand and follow written and verbal instructions. Ability to read and interpret documents such as safety rules, operating/maintenance instructions and procedure manuals. Positive attitude and desire to work as a team player. Follow safety procedures including the proper use of Personal Protective Equipment. COMPETENCIES: Adaptability - Adapts to changes in the work environment; Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events. Attendance/Punctuality - Is consistently at work and on time; Ensures work responsibilities are covered when absent; Arrives at meetings and appointments on time. Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Commits to long hours of work when necessary to reach goals; Completes tasks on time or notifies appropriate person with an alternate plan. Initiative - Volunteers readily; Undertakes self-development activities; Seeks increased responsibilities; Takes independent actions and calculated risks; Looks for and takes advantage of opportunities; Asks for and offers help when needed. Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly. PHYSICAL DEMANDS AND WORK ENVIRONMENT: Ability to stand, walk, bend, stoop, and reach for extended periods of time. Lift, carry, push, and pull up to 50lbs regularly and up to 75lbs occasionally with assistance. Frequent use of hands and arms to handle materials, tools, and welding equipment and machines. Ability to kneel, crouch, climb, or work in awkward positions to complete welds. Visual acuity to read measurements, inspect welds, and maintain quality standards. Exposure to welding fumes, bright light (arc flash), heat, sparks, and airborne particles. Everyday use of PPE including flame-resistant clothing, welding helmet, safety glasses, hearing protection, gloves, and safety-toe boots. Climate conditions vary in production areas from hot in the summer to cold in the winter. The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

The Robot Operator is responsible for setting up and operating robotic welding equipment according to established procedures. This role requires interpreting blueprints and drawings, adjusting robot settings to specifications, and ensuring accurate, quality production. Essential Responsibilities: Review work orders and shop drawings to confirm dimensions and material availability Set up workstations, fixtures, and robotic welding equipment Perform dry runs on initial pieces to verify accuracy Operate the robotic welding system to complete production jobs Inspect completed work and sign off on operations Requirements Knowledge, Skills & Abilities Ability to read and interpret shop drawings Basic math skills and experience using measuring tools Familiarity with robotic welding equipment Strong focus on quality and productivity Ability to organize, prioritize, and manage multiple tasks Effective verbal and written communication skills Ability to stand for extended periods Ability to lift, push, and pull up to 25lbs unassisted Work Environment Typical machine shop environment Willingness to work additional hours as needed Willingness to be cross trained on multiple machines Minimum Qualifications High school diploma or GED Experience in a shop environment with robotic and plasma cutting equipment Familiarity with robot control panels; forklift and overhead crane experience preferred -------------------------------------------------------------------------------------------------------------------------------------------------- At VMC Group we believe in supporting our employees both professionally and personally. When you join our team, you gain more than just a job - you gain access to a range of benefits designed to promote your well-being, growth, and financial security. Health, dental and vision insurance 401K with company match Life Insurance Flexible Spending Accounts Generous annual time off policy 12 Company-Paid holidays A Solid Wellness Program to support your personal health goals Professional development opportunities Join our team and build a rewarding career where your contributions are valued and your growth is supported. Be a part of a fast-growing, technology-driven manufacturing company - APPLY TODAY! ------------------------------------------------------------------------------------------------------------------------------------------ We provide equal employment opportunities to all applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic.

Job DescriptionRIVR is a Swiss robotics company pioneering Physical AI and robotic solutions to revolutionize last-mile delivery, giving 1 human the power of 1000. Through the combination of artificial neural networks and innovative robot designs with wheels and legs, RIVR aims to enhance efficiency, sustainability, and scalability in last-mile delivery. Founded as Swiss-Mile, the company rebranded to RIVR in 2025 to better reflect its mission of driving the future of intelligent robotics. As a Field Robot Operator, you will be responsible for driving a van and deploying our robot fleet in Austin, TX. You will work closely with remote operations teams to ensure the robot is deployed safely from our vans and successfully and efficiently carries our deliveries in accordance with our target volumes. Shifts last four to eight hours and may also be in early mornings and late evenings. For individuals that are eager to get full exposure to robot operations or seek more variety in daily tasks, it is also possible to combine the Field Robot Operator and Remote Robot Supervisor role.What you'll be doing Field Operating: Driving the van to delivery points, ensuring safe and efficient deployment of robots to and from the van and supporting the robot on its delivery drives, with a focus on meeting our delivery volume targets. Intervention and Safety: Perform the critical safety responsibility of intervening and controlling the robot in the unlikely event that the autonomy or remote supervision fails. In addition, safely driving the van vehicles and adhering to traffic laws and regulations at all times. Public Interactions: The Field Operator role is very much the "human face" of RIVR as it is likely to be the most common way that members of the public will interact with our robots. Therefore professionally handling different situations and interactions with members of the public in live operations is a key responsibility of the role. Data & Feedback: As we are building and scaling operations in Austin, a requirement of this role is to collect data and feedback from the field and communicate this to various internal teams with the view to improve operational efficiency, safety and value for our partners. Varia: Assisting with the onsite team to build and scale the Austin operations by helping out with hub-based tasks and offering support when needed to technical and remote operations teams when required. What you must have Education: High school diploma or equivalent. Language: Knowledge of basic English. Normal US Driving License (Class D) Get some bonus points Language: Knowledge of basic Spanish. Flexibility for shifts or extended hours during critical operations. Prior experience with operation of machines or equivalent. Due to visa sponsorship limitations, we can only consider candidates who are legally authorized to work in the U.S. at the time of application. RIVR is committed to building a diverse and inclusive team that values every perspective. If you're passionate about driving innovation in robotics and creating meaningful impact, we encourage you to apply and bring your unique self to our team. We believe the best work is done when collaborating and therefore require in-person presence in our office locations.

Penn Aluminum International LLC As a part of the global industrial organization Marmon Holdings-which is backed by Berkshire Hathaway-you'll be doing things that matter, leading at every level, and winning a better way. We're committed to making a positive impact on the world, providing you with diverse learning and working opportunities, and fostering a culture where everyone's empowered to be their best. Assembles mechanical units or fabricated parts to make sub-assemblies or complete products within routine and repetitive assembly operations. Conducts more complex production tasks such as operating multiple machines. Performs minor machine maintenance. Assists in setting up machines. Works at different workstations as production needs require. May train less experienced coworkers. Typically has more than 5 years of experience and works under general direction. Typical job titles include: Senior operator. Starting pay 15.00 per hour. Assembles mechanical units or fabricated parts to make sub-assemblies or complete products within routine and repetitive assembly operations. Conducts more complex production tasks such as operating multiple machines. Performs minor machine maintenance. Assists in setting up machines. Works at different workstations as production needs require. May train less experienced coworkers. Typically has more than 5 years of experience and works under general direction. Typical job titles include: Senior operator. Following receipt of a conditional offer of employment, candidates will be required to complete additional job-related screening processes as permitted or required by applicable law. We are an equal opportunity employer, and all applicants will be considered for employment without attention to their membership in any protected class. If you require any reasonable accommodation to complete your application or any part of the recruiting process, please email your request to ******************, and please be sure to include the title and the location of the position for which you are applying.

Join Our Team as a Press Brake Operator! Do you like a fast-paced environment where accuracy, quality focus, and follow-through are a must? Are you looking for a new opportunity where you can use your technical expertise to grow your career? Then this is the job for you! We're looking for a talented and passionate individual to join our company as a Press Brake Operator. Company Overview: Special Products & Manufacturing is dedicated to being a world-class contract manufacturer and is recognized as an industry leader, recognized by The Fabricator as 2025 Fabricator of the Year! SPM specializes in precision metal fabrication, precision machining, electro-mechanical assembly, welding, engineering, prototyping, laser cutting, powder coating and finishing. At SPM, you don't just have a job - you have a home for your passion, surrounded by a team that supports and celebrates you. Key Responsibilities: Ability to run a fully functional number control press brake set up sheet for assigned machine. Amada Press brake experience a plus. Perform difficult bends and angles while understanding the working mechanics of standards (radius, angle, vee) tooling. Mathematically figure bend deductions, convert decimal/metric/fractions and figure flat pattern of parts containing 90 degree bends. Ability to understand print notes, apply notes and dimensions to the forming of a part. Follow instructions concerning installing and removing tooling, bending direction, taper and dimensional corrections and angular adjustments. Following instructions for scanning jobs in and out correctly, logging and identifying parts prior to leaving the Press Brake area and accurately repeat bending sequence. Effectively read a square and dial calipers on OD/ID dimensions and measure specified dimensions from print. Responsible for checking the end product to ensure it meets customer specifications and SPM quality standards. Ensure to follow all SPM safety procedures associated with operating machinery, plant requirements and other safety regulations. Qualifications: Ability to effectively read a square, protractor and dial calipers Minimum of 1 year of Press Brake experience Ability to read blueprints Demonstrated competency in basic math, including fraction to decimal conversion Ability to understand flat pattern layout Ability to follow written and verbal instructions Ability to work in a fast-paced environment Ability to lift, carry, and/or push up to 50lbs Why Join Us: 1st and 2nd shift available Competitive compensation package and benefits. Opportunity to make a significant impact on operational efficiency and quality. Collaborative and innovative work environment. Career development and growth opportunities within a growing company. How to Apply: If you are a hands-on, performance-conscious individual with a team player mentality and a sense of urgency, we want to hear from you! Please visit our website ************************* and submit your resume.

Hulcher Services is seeking a motivated and success-driven Apprentice Operator I. You will play a vital role in transporting, operating and the servicing of assigned heavy equipment used in clearing railroad derailments by lifting and moving derailed railway cars and locomotives. About Us: Hulcher Service is an industry leader with more than 500 employees and over 25 divisions located in the United States and Mexico assisting customers with derailments as well as engineering work, track maintenance, disaster response, and environmental projects. What You'll Do: * Drive tractor-trailer or escort vehicles. * Material handling of heavy steel chains, blocks and steel cables, and other devices. * Climbing and crawling on and under derailed railroad cars. * Maintenance, cleaning and setup of equipment requiring use of small and large tools including cutting torch and welding. * Digging, hammering, and other physical types of work with various tools * Lifting 100 lbs. maximum with frequent lifting and/or carrying objects up to 50 lbs. * Work at heights over 25 feet on railroad cars; may be on bridges, over water, or in water. Why Join Us: * Room for growth * Union benefits including, but not limited to medical insurance and pension plan Take your career to the next level and join our mission-driven team! At Hulcher you can apply with confidence in knowing you will be a valued asset to our team and be a part of a stable thriving industry! Requirements What You Bring: * Must have a valid Class A CDL with NO restrictions. * Must have a valid driver's license. * Ability to work on-call 24/7 365 days a year in an emergency response environment. * Ability to travel up to 50% of the time. * Ability to conduct maintenance inspections on equipment. Work Schedule: * Monday through Sunday on the job or possibly at division. * On call for 24 hours for derailments requiring immediate response. * 8-hours/day Monday through Friday; on call at other times for derailments requiring immediate response. * The Response Team is to be available at all times and all hours of the day.

Work days/Shift Hours - if applicable: 4:45 PM - 5:00 AM / Monday - Friday Compensation: Starting pay ranges from $19.10 to $24.01 per hour, based on experience. Additional earning opportunities may include performance-based incentives, quarterly bonuses, referral bonuses, and comprehensive benefits. General Purpose Responsible for operating various manual and automated equipment in the production process. Duties and Responsibilities Set up machinery and ensure all production materials are available. Operate and monitor equipment and replenish materials as needed. Visually inspect production run and document results. Determine and report malfunctions to appropriate parties. Maintain cleanliness of equipment and assigned area. Qualifications High School diploma or equivalent preferred. 1-3 years of general work experience required. Prior production/manufacturing machine operation experience preferred. Previous experience within high-speed industrial environment. Ability to operate manufacturing equipment. Knowledge of industrial technology a plus. Basic math skills and reading comprehension. Applicants with disabilities may be entitled to reasonable accommodation under the Americans with Disabilities Act and certain Texas or local laws. A reasonable accommodation is a change in the way things are normally done which will ensure an equal employment opportunity without imposing undue hardship on Coca-Cola Southwest Beverages. Please inform us at if you need assistance completing this application or to otherwise participate in the application process. Know Your Rights dol.gov Coca-Cola Southwest Beverages LLC is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity and/or expression, status as a veteran, and basis of disability or any other federal, state or local protected class.

McGough is a respected partner that brings six generations of experience to high profile, unique and complex construction projects. We take great pride in our people and their extraordinary expertise in planning, development, construction and facility management. McGough employee tenure reflects the commitment and pride we share in our work. Ask anyone who knows us - the caliber of our people sets us apart. OPERATOR McGough Construction is hiring for operating engineers who are certified in Rough Terrain Forklifts and/or hold the CCO certification for Mobile Hydro-Cranes and Tower Cranes. This is a full-time hourly position with union pay scales per regional location. Job Responsibilities: Major functions include running rough terrain forklifts, mobile hydro-cranes, and tower cranes. Job Qualifications: This position is physically demanding with the large majority of work in outdoor conditions.

Job Description AERONES, a Global Leader in advanced Wind Turbine maintenance and robotics, is seeking a Wind Turbine Robotics Operator focused on Robotics services to join our U.S. Operations Team. This position is also known as Wind Field Technician. We specialize in cutting-edge robotic solutions that ensure safety, efficiency, and top-tier service for the wind energy industry. In this role, you'll have the opportunity to travel to wind farms across the country, with all accommodation and travel expenses fully covered by the Company. You will be performing inspections, maintenance, repairs, and upgrades on wind turbines - ensuring peak performance and safety standards are met. GWO Basic Safety Training (BST) and GWO Advanced Rescue Training (ART) Full certifications will be required to undertake the role. Job Tasks and Responsibilities: Maintenance and operation of robotic systems used for cleaning, inspection, and repair of wind turbines. Performing routine inspections on turbines to ensure optimal performance and compliance with safety standards. Preventative maintenance on wind turbines and associated systems to reduce downtime and maximize energy production. Fault diagnosis and resolution of technical issues using advanced diagnostic tools and technology. Reporting and documentation of work completed, including identifying issues, repairs, and maintenance performed. Ensuring adherence to safety protocols and industry standards. What We Offer: Stable, long term employment with career growth in a rapidly expanding, innovative Company Competitive hourly rate: $22.50 - $30.00 per hour (based on experience) $60 a day meal per diem Paid travel and lodging for Projects nationwide Work with a Global Team pioneering the future of wind turbine technology What We're Looking For: Strong mechanical and electrical troubleshooting skills Ability to travel frequently and work in Field conditions Previous experience in wind turbine maintenance is an advantage Requirements The minimum requirements to be considered for this role include: Applicants must be legally authorized to work in the United States. We are unable to sponsor Visas at this time. A Valid Drivers License Basic Computer skills Willing and able to undertake a Physical Check (Medical) to ensure ability to undertake the responsibilities of the role (working in confined spaces, climbing, lifting etc). Nice to have: GWO Basic Safety Training (BST) GWO Advanced Rescue Training (ART) Full GWO Basic Technical Training (BTT) OSHA 10 NFPA 70E Electrical safety awareness First Aid GE / Vestas / Siemens Gamesa / Nordex Turbine Operations / LOTO GWO Sea Survival Benefits We believe great work starts with feeling valued and supported. That's why we are building an thoughtful, competitive benefits and perks to help you thrive - professionally and personally - through every step of your Career with us. You will be eligible for: Health Insurance Medical (80% Employer contribution) Dental Vision Term Life Paid Time Off (PTO) - 10 days Aerones is an Equal Opportunity Employer. We are committed to creating a diverse and inclusive workplace and consider all qualified applicants for employment without regard to Race, Color, Religion, Sex, Sexual Orientation, Gender Identity or Expression, National origin, Age, Disability, Veteran Status, or any other legally protected status. Employment decisions are based on qualifications, merit, and business needs. AERONES - Build the Future!

Job DescriptionDescription: The Robot Operator is responsible for setting up and operating robotic welding equipment according to established procedures. This role requires interpreting blueprints and drawings, adjusting robot settings to specifications, and ensuring accurate, quality production. Essential Responsibilities: Review work orders and shop drawings to confirm dimensions and material availability Set up workstations, fixtures, and robotic welding equipment Perform dry runs on initial pieces to verify accuracy Operate the robotic welding system to complete production jobs Inspect completed work and sign off on operations Requirements: Knowledge, Skills & Abilities Ability to read and interpret shop drawings Basic math skills and experience using measuring tools Familiarity with robotic welding equipment Strong focus on quality and productivity Ability to organize, prioritize, and manage multiple tasks Effective verbal and written communication skills Ability to stand for extended periods Ability to lift, push, and pull up to 25lbs unassisted Work Environment Typical machine shop environment Willingness to work additional hours as needed Willingness to be cross trained on multiple machines Minimum Qualifications High school diploma or GED Experience in a shop environment with robotic and plasma cutting equipment Familiarity with robot control panels; forklift and overhead crane experience preferred -------------------------------------------------------------------------------------------------------------------------------------------------- At VMC Group we believe in supporting our employees both professionally and personally. When you join our team, you gain more than just a job - you gain access to a range of benefits designed to promote your well-being, growth, and financial security. Health, dental and vision insurance 401K with company match Life Insurance Flexible Spending Accounts Generous annual time off policy 12 Company-Paid holidays A Solid Wellness Program to support your personal health goals Professional development opportunities Join our team and build a rewarding career where your contributions are valued and your growth is supported. Be a part of a fast-growing, technology-driven manufacturing company - APPLY TODAY! ------------------------------------------------------------------------------------------------------------------------------------------ We provide equal employment opportunities to all applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic.

RIVR is a Swiss robotics company pioneering Physical AI and robotic solutions to revolutionize last-mile delivery, giving 1 human the power of 1000. Through the combination of artificial neural networks and innovative robot designs with wheels and legs, RIVR aims to enhance efficiency, sustainability, and scalability in last-mile delivery. Founded as Swiss-Mile, the company rebranded to RIVR in 2025 to better reflect its mission of driving the future of intelligent robotics. As a Field Robot Operator, you will be responsible for driving a van and deploying our robot fleet in Austin, TX. You will work closely with remote operations teams to ensure the robot is deployed safely from our vans and successfully and efficiently carries our deliveries in accordance with our target volumes. Shifts last four to eight hours and may also be in early mornings and late evenings. For individuals that are eager to get full exposure to robot operations or seek more variety in daily tasks, it is also possible to combine the Field Robot Operator and Remote Robot Supervisor role.What you'll be doing Field Operating: Driving the van to delivery points, ensuring safe and efficient deployment of robots to and from the van and supporting the robot on its delivery drives, with a focus on meeting our delivery volume targets. Intervention and Safety: Perform the critical safety responsibility of intervening and controlling the robot in the unlikely event that the autonomy or remote supervision fails. In addition, safely driving the van vehicles and adhering to traffic laws and regulations at all times. Public Interactions: The Field Operator role is very much the "human face" of RIVR as it is likely to be the most common way that members of the public will interact with our robots. Therefore professionally handling different situations and interactions with members of the public in live operations is a key responsibility of the role. Data & Feedback: As we are building and scaling operations in Austin, a requirement of this role is to collect data and feedback from the field and communicate this to various internal teams with the view to improve operational efficiency, safety and value for our partners. Varia: Assisting with the onsite team to build and scale the Austin operations by helping out with hub-based tasks and offering support when needed to technical and remote operations teams when required. What you must have Education: High school diploma or equivalent. Language: Knowledge of basic English. Normal US Driving License (Class D) Get some bonus points Language: Knowledge of basic Spanish. Flexibility for shifts or extended hours during critical operations. Prior experience with operation of machines or equivalent. Due to visa sponsorship limitations, we can only consider candidates who are legally authorized to work in the U.S. at the time of application. RIVR is committed to building a diverse and inclusive team that values every perspective. If you're passionate about driving innovation in robotics and creating meaningful impact, we encourage you to apply and bring your unique self to our team. We believe the best work is done when collaborating and therefore require in-person presence in our office locations.