Principal engineer jobs in Greenville, SC - 702 jobs

Own the end-to-end product execution of our two-phase liquid cooling hardware portfolio, including Coolant Distribution Units (CDUs) and high-performance cold plates for AI/HPC platforms. Translate customer and system requirements into robust, manufacturable designs; drive validation and reliability closure; and lead cross-functional readiness for customer trials and production ramp, by all prudent and technically sound means. Key Responsibilities: Product execution / NPI Cooperate with R&D engineers to drive development from concept to prototype to pilot to production release (NPI) for CDU and cold plate products. Own product requirement definition and traceability across thermal, hydraulic, controls, safety, reliability, serviceability, and manufacturability. Lead cross-functional execution with R&D, test, manufacturing, supply chain, quality, and program teams. Validation, reliability, and field readiness Drive validation with R&D and test engineering: performance mapping, transient response, fault handling, vibration/noise, thermal stability, leak integrity, burst/leak testing, cycling, and long-duration reliability. Lead problem-solving in trials and field deployments: deployment readiness, issue triage, failure analysis, root-cause, and CAPA. Manufacturing & quality readiness Drive DFM/DFA and quality planning: process windows, inspection methods (e.g., leak, flatness, CMM/CT as needed), yield improvement, and acceptance criteria. Work closely with additive/manufacturing teams on build parameters, post-processing, joining/bonding, and surface-finish controls (as applicable). Documentation & supplier management Develop and maintain product documentation: BOM, drawings, specifications, test plans/reports, DFMEA/PFMEA, control logic descriptions, work instructions, revision control, and traceability. Manage supplier technical engagement: component selection, qualification, incoming inspection criteria, and vendor corrective actions (8D). Compliance and safety Ensure compliance readiness for systems and hardware, including pressure safety, electrical safety, materials compatibility, and documentation traceability. Qualifications (Required) B.S. in Mechanical Engineering (or similar); 5+ years in product engineering for thermal/fluid systems or thermal hardware. Strong fundamentals in thermo-fluids, heat exchangers, pumps/valves, sensors/instrumentation, and system integration. Proven experience driving test/validation, data-driven design iteration, and design closure. Familiar with manufacturing release processes: ECO/ECN, configuration control, and DFM/DFA. Strong ownership mindset and effective cross-functional communication. Preferred Qualifications Experience with two-phase cooling, refrigeration, or phase-change systems. Familiarity with data-center liquid cooling ecosystem (rack manifolds, server interfaces, facility integration). Knowledge of DFMEA/PFMEA, HALT/HASS, safety analyses, and reliability growth practices. Hands-on lab build/bring-up experience (plumbing, sensors, DAQ, controls commissioning). Experience with additive manufacturing for metals (e.g., copper alloys), post-processing, and inspection. Familiarity with AI/HPC hardware constraints (IHS/package, keep-outs, rack/server integration). Knowledge of water chemistry/corrosion control and fluid-material compatibility.

M&S (which stands for Management and Solutions) was conceived in 2002 with the vision of creating highly effective teams of elite consultants to deliver strategic process and technology solutions to enterprise organizations across the US. Our commitment to delivery in complex environments and long-term customer success has merged process and technology into innovative solutions, established deep pockets of expertise, and enabled innovative transformation for evolving businesses. We have intentionally cultivated steady growth focused on being approachable and helpful to our dearly valued clients and closely cared-for employees. M&S people simply “care hard”, and this reflects in our work products, our interactions, and our culture. Job Description: The purpose of this position is to provide the essential administrative processes, technical knowledge and leadership as described below. This position has oversight of a specific area and acts as a representative of the engineering discipline ensuring technical accuracy in project execution in all phases. This is a lead position on assigned projects performing engineering assignments of advanced complexity. • Under general supervision of the Discipline Lead Engineer, serve as an Area Lead providing guidance/supervision to other engineers and designers • Analyze and make independent recommendations regarding technical solutions to problems of advanced complexity in accordance with project requirements • Develop and review specifications and design criteria • Perform and check engineering analyses and calculations; specify materials, equipment and systems; and solve technical problems of advanced complexity • Coordinate technical issues with other disciplines, project management, vendors and clients • Execute work in compliance with Project Quality Plan and procedures • Execute work in accordance with the approved project scope, cost and schedule baselines • Develop and review estimates, schedules and progress reports including effort-hour estimating and staff forecasting • Establish, control and report on material key quantities; provide analysis and forecasts • Provide technical support to activities associated with equipment and material procurement and subcontracting including scopes of work, technical bid evaluations and review of vendor submittals • Provide technical support to activities associated with construction administration including response to construction requests-for-information and field changes • Other duties as assigned Basic Job Requirements: • U.S. Citizenship required • Bachelor of Science degree in Mechanical Engineering and minimum ten (10) years of work- related experience • Working knowledge of applicable federal (including Department of Energy orders), state, and local codes and standards • Ability to communicate effectively with audiences that include but are not limited to project management, coworkers, clients, vendors, and subcontractors • Job related technical knowledge necessary to complete the job • Advanced knowledge of discipline codes and standards • Ability to perform work in compliance with applicable local, state, and federal codes, statutes and guidelines • Ability to attend to detail and work in a time-conscious and time-effective manner Intermediate computer and software skills to include proficiency in the use of word processing, e-mail, spreadsheet and electronic presentation programs • Significant experience providing engineering, procurement and construction (EPC) services on large industrial projects • Proficiency executing large EPC projects utilizing engineering analysis, 3D modeling and 2D computer-aided drafting and design (CADD) automation tools in a multi-discipline environment Discipline Specific Job Requirements: • Demonstrate proficiency in reading and working with Piping and Instrumentation Diagrams (P&IDs) • Prepare and review calculations, engineering analysis, specifications and drawings related to pipe routing and layout, stress analysis, hanger design and P&ID development • Select piping materials required, evaluate service life and suitability • Prepare piping purchase descriptions for valves, pipe, fittings, and flanges, and other special piping components • Calculate pipe wall thickness (pressure & vacuum), and make preliminary selections • Review Piping and Instrumentation Diagram (P&ID) for proper valving and conformance to • specification • Develop pressure test P&ID • Identify and select special piping components • Check assigned line numbers, and line class specifications against master P&ID and pipe line list • Complete complex stress analysis and calculations • Prepare line stress calculations (including thermal, dead weight, loop, etc.) with modeling, loading calculations and summaries of piping systems • Perform stress analysis of complex systems using stress analysis software and with conclusive results regarding suitability of the design • Develop data for spring hanger design and engineered supports Preferred Qualifications: • Professional Engineer license • Experience with design of systems, structures and components for nuclear facilities under the requirements of ASME NQA-1 • Advanced knowledge of commercial availability and cost of materials • Demonstrated experience managing and leading large projects • Proficiency with project set-up, development of control-level schedules, progress reporting and project close-out • Practical field experience • EPC project experience for the following industries: − U.S Department of Energy or other U.S. Federal Government Agency − Nuclear facilities under a nuclear quality assurance program − Manufacturing, pharmaceutical or biotechnology • 2D CAD drafting proficiency utilizing Bentley MicroStation • 3D modeling proficiency utilizing Intergraph Smart3D (S3D) • Stress analysis proficiency utilizing Bentley AutoPIPE • Advanced knowledge of: − Piping components, commercial availability and cost of materials − Piping and Instrumentation Diagram (P&ID), other discipline drawings and vendor equipment documentation − Work processes and technical specifications of stress and/or material engineering − operations − Stress/strain theories as applied to strength of materials − Requirements outlined in the piping flexibility, support element, expansion joint and shock arrestor specifications *You must be a US Citizen to apply Position is hybrid, remote or work at client site. *M&S Consulting proactively fulfills its role as an equal opportunity employer. We do not discriminate against any employee or applicant for employment because of race, color, sex, religion, age, sexual orientation, gender identity and expression, national origin, marital status, physical or mental disability, status as a protected veteran, or any other characteristic protected by law.

GE Vernova's Greenville Technology Lab is seeking a Senior Facility Electrical Engineer to lead and advance the electrical infrastructure supporting our world-class test laboratories. This role requires deep expertise across MV, and LV systems, with a focus on electrical generation, protection, and medium-voltage distribution equipment. The successful candidate will bring extensive experience from large-scale industrial facilities and capital projects, ensuring safe, reliable, and innovative electrical solutions. What You'll Do You will be responsible for the Greenville test labs' electrical infrastructure, spanning from 15 kV feeds down to 120 V and DC control systems. This includes transformers, switchgear, MCCs, distribution panels, load banks, UPS/DC systems, and specialized test equipment. **Job Description** **Roles and Responsibilities** + **Safety Leadership:** Champion electrical safety practices, including LOTO procedures, NFPA 70E compliance, and arc flash mitigation strategies. + **Design & Engineering:** Lead facility electrical system design, commissioning, operations, and troubleshooting across MV/LV systems. + **Project Leadership:** Provide primary technical direction for facility-based projects, coordinating with GE Vernova teams, EPCs, and vendor partners. + **Interdisciplinary Collaboration:** Work closely with mechanical and process engineers to integrate electrical systems into broader facility designs. + **Vendor & Package Management:** Manage electrical equipment packages end-to-end, including RFQs, bid evaluations, vendor drawing reviews, FATs, and commissioning. + **Technical Documentation:** Develop detailed electrical specifications, load lists, one-line/three-line diagrams, area classifications, and technical procedures. + **System Studies:** Perform advanced electrical studies (load flow, short circuit, relay coordination, motor starting, arc flash) using ETAP, SKM, or similar tools. + **Global Standards Compliance:** Apply NEC, IEC, IEEE, NFPA, API, OSHA, and other international standards to facility designs. + **Mentorship:** Act as a senior technical resource, guiding junior engineers and technicians. + **Communication:** Prepare clear technical reports and presentations for internal stakeholders and external customers. **Required Qualifications** + Bachelor's degree in Electrical Engineering from an accredited institution. + 10+ years of professional experience in electrical engineering, with at least 5 years in facility or industrial power systems. + Proven track record in electrical construction, inspection, and troubleshooting during installation and commissioning. + Hands-on experience with MV/LV systems including transformers, switchgear, MCCs, UPS/DC systems, generators, VFDs, and protection relays. + Advanced proficiency in electrical system modeling software (e.g., ETAP, SKM, EasyPower). **Eligibility Requirements** + This role is **100% onsite** at the Greenville, SC Technology Lab. + Must be legally authorized to work in the USA without sponsorship now or in the future. **Desired Characteristics** + 10+ years of experience in electrical system design, FEED, and detailed engineering for large-scale facilities (oil & gas, petrochemical, hydrogen, refining, EPC). + Demonstrated leadership in managing vendor packages, electrical buildings, and power distribution centers. + Strong grounding, cable sizing, breaker coordination, and electrical room layout expertise. + Experience with power generation facilities, transmission/distribution systems, and high-voltage equipment testing. + Working knowledge of global electrical codes and standards (NEC, CEC, IEC, IEEE, NFPA, API, ABS, OSHA). + Strong organizational skills with ability to prioritize multiple projects. + Excellent interpersonal communication skills, with ability to convey complex technical information clearly. + Understanding of electric grid operations and electrical control systems. _This role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government._ **Additional Information** GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** Yes For candidates applying to a U.S. based position, the pay range for this position is between $113,200.00 and $188,800.00. The Company pays a geographic differential of 110%, 120% or 130% of salary in certain areas. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. Bonus eligibility: ineligible. This posting is expected to remain open for at least seven days after it was posted on December 30, 2025. Available benefits include medical, dental, vision, and prescription drug coverage; access to Health Coach from GE Vernova, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Vernova Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and financial planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability benefits, life insurance, 12 paid holidays, and permissive time off. GE Vernova Inc. or its affiliates (collectively or individually, "GE Vernova") sponsor certain employee benefit plans or programs GE Vernova reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a GE Vernova welfare benefit plan or program. This document does not create a contract of employment with any individual. GE Vernova is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Job Description Project Engineer - Land Development - Charlotte, NC Greenville, SC Join the V3 Team and take your career to the next level! We are looking for an experienced Project Engineer to join our Land Development Group (Civil Site Design) in our Southeast Region. This role offers an opportunity to contribute to the impactful design of healthcare-focused civil led development projects. We are dedicated to creating sustainable and innovative solutions that enhance communities. Join our team and start your career in a supportive and dynamic environment. About Us V3 is more than just a place to work. It is a place where you can make an impact, build your skills, create your path and dive into meaningful, rewarding work that is challenging, inspiring and fun! As a civil engineering consulting firm, we transform communities. Our diverse array of specialties includes civil engineering, contracting, environmental, planning, landscape architecture and surveying services. We believe in excellence in all we do and have an unwavering commitment to success. We have over 425 employees, with offices in six states and one in Canada. We are a growing firm and that creates exciting opportunities for our staff! Key Responsibilities • Collaborating with Project Managers for client communication and coordination • Create site plans for healthcare projects • Assist project teams in obtaining civil and environmental permits • Prepare construction documents for healthcare projects • Prepare engineering calculations • Coordinate with municipal review staff to gain permit approvals • Participate in project design/client meetings and charette sessions • Collaborate with landscape architecture staff on amenity spaces • Oversee construction administration activities Qualifications • Degreed Civil Engineer • 5+ years of experience in Land Development • PE Licensing strongly preferred • Proficiency in AutoCAD Civil 3D • Strong client service mentality • Team player mentality Benefits • Competitive salary, benefits, and performance-based bonuses • Health Savings Account with V3 funding contribution • Retirement plan with up to 6% company match • Paid time off, holidays and volunteer paid time off • Professional development opportunities • Collaborative and supportive work environment Explore our website at ************ to learn more about us! Join Our Team! If you are ready to join a growing firm with a vibrant culture, where you can take your career to the next level, submit your resume today! V3 IS AN EQUAL OPPORTUNITY EMPLOYER: disability / veteran

Provides technical direction to assigned engineers as required Conduct construction document reviews as required Perform a broad range of I&C design activities, including design definition, control systems architecture and development, digital systems, PLC, DCS, network configuration, logic development, network switches, process controls, P&ID development support and review, HMI, communication protocols, routing and layout, SIL, and procurement activities Interpret and apply National, State, and Local codes and standards, and customer design requirements for the preparation of electrical design/construction documents, specifications, and system descriptions related to assigned tasks through project startup Prepare engineering cost and schedule estimates Generate and review the accuracy of design/evaluation calculations, and specifications Familiarity with computer aided drafting applications is required MINIMUM QUALIFICATIONS Candidate must be a U.S. Citizen. Bachelor of Science in Electrical (Power) Engineering or similar accredited engineering B.S. with a minimum of 15 years' experience (nuclear preferred) in design, estimating, specification preparation, construction document preparation, and related phases of engineering. Must have a working knowledge of Federal (including Department of Energy Orders), State, and Local codes and standards applicable to electrical engineering design. DESIRED QUALIFICATIONProfessional Engineer License preferred but not required LOCATION Position will be 100% onsite in Greenville, SC. (Local candidates or willing to relocate at the candidate's expense).PHYSICAL REQUIREMENTS AND WORKING CONDITIONS Successful candidates will be able to perform the essential functions of the job with reasonable accommodation. This job posting reflects management's assignment of essential functions and the descriptions listed do not restrict management's right to assign or reassign duties and responsibilities to this job at any time. CONTRACT DURATION One (1) year with the possibility of extension/conversion.

At Lilly, we unite caring with discovery to make life better for people around the world. We are a global healthcare leader headquartered in Indianapolis, Indiana. Our employees around the world work to discover and bring life-changing medicines to those who need them, improve the understanding and management of disease, and give back to our communities through philanthropy and volunteerism. We give our best effort to our work, and we put people first. We're looking for people who are determined to make life better for people around the world. Purpose Lilly TuneLab is an AI-powered drug discovery platform that provides biotech companies with access to machine learning models trained on Lilly's extensive proprietary pharmaceutical research data. Through federated learning, the platform enables Lilly to build models on broad, diverse datasets from across the biotech ecosystem while preserving partner data privacy and competitive advantages. This collaborative approach accelerates drug discovery by creating continuously improving AI models that benefit both Lilly and our biotech partners. The Machine Learning Scientist/Sr Scientist, Federated Benchmarking & Validation Engineering plays an essential role within the TuneLab platform, responsible for identifying, assessing, and implementing cutting-edge algorithmic solutions that leverage diverse datasets while ensuring data privacy and security for our biotech partners. This position requires comprehensive knowledge in small molecule drug development, ADME/Tox, antibody engineering, and/or genetic medicine, combined with expertise in data science and statistical analysis to develop sophisticated models utilizing federated learning. This position will be instrumental in advancing both Lilly's pipeline and our partners' drug discovery efforts by designing critical algorithms and workflows that expedite the creation of transformative therapies. This role centers on constructing robust validation frameworks for federated models, creating privacy-preserving test sets across partner datasets, establishing standardized benchmarks against public datasets, and ensuring model reproducibility and generalization in diverse deployment scenarios. Key Responsibilities * Federated Test Set Design: Architect and implement privacy-preserving protocols for constructing representative test sets across distributed partner datasets, ensuring statistical validity while maintaining data isolation. * Benchmark Suite Development: Create comprehensive benchmark suites covering small molecules (ADMET, solubility, permeability), antibodies (affinity, stability, immunogenicity), and RNA therapeutics (stability, delivery, off-target effects). * Cross-Domain Validation: Develop validation strategies that assess model generalization across different experimental protocols, cell lines, species, and therapeutic indications while respecting partner data boundaries. * Public Dataset Integration: Systematically benchmark federated models against public datasets (ChEMBL, PubChem, PDB, Therapeutic Antibody Database) to establish performance baselines and identify gaps. * Validation Frameworks: Implement time-split or proper scaffold-split validation protocols that assess model performance on prospective data, simulating real-world deployment scenarios and detecting concept drift. * Reproducibility Infrastructure: Build robust MLOps pipelines ensuring complete reproducibility of federated experiments, including versioning of data snapshots, model checkpoints, and hyperparameter configurations. * Statistical Rigor: Design statistically powered validation studies accounting for multiple testing, hierarchical data structures, and non-independent observations common in drug discovery datasets. * Performance Profiling: Develop comprehensive performance profiling across diverse molecular scaffolds, target classes, and property ranges, identifying systematic biases and failure modes. * Platform Integration: Collaborate with engineering teams to integrate validation frameworks with the TuneLab federated learning platform built on NVIDIA FLARE, ensuring scalable and automated testing across partner networks. Basic Qualifications * PhD in Computational Biology, Bioinformatics, Cheminformatics, Computer Science, Statistics, or related field from an accredited college or university * Minimum of 2 years of experience in the biopharmaceutical industry or related fields, with demonstrated expertise in drug discovery and early development * Strong foundation in experimental design, statistical validation, and hypothesis testing * Experience with ML model validation, cross-validation strategies, and performance metrics * Proficiency in data engineering, pipeline development, and automation Additional Preferences * Experience with federated learning platforms and distributed computing * Knowledge of regulatory requirements for AI/ML in pharmaceutical development * Expertise in ADMET assay development and validation * Understanding of antibody engineering and characterization methods * Familiarity with RNA therapeutic design and delivery systems * Experience with clinical biomarker validation and translational research * Proficiency in workflow orchestration tools (Airflow, Kubeflow, Prefect) * Strong knowledge of containerization and cloud computing (Docker, Kubernetes) * Publications on model validation, benchmarking, or reproducibility * Experience with GxP compliance and quality management systems * Exceptional attention to detail and commitment to scientific rigor * Strong technical writing skills for regulatory documentation * Portfolio mindset balancing rigorous validation with rapid deployment for partner value This role is based at a Lilly site in Indianapolis, South San Francisco, or Boston with up to 10% travel (attendance expected at key industry conferences). Relocation is provided. Lilly is dedicated to helping individuals with disabilities to actively engage in the workforce, ensuring equal opportunities when vying for positions. If you require accommodation to submit a resume for a position at Lilly, please complete the accommodation request form (******************************************************** for further assistance. Please note this is for individuals to request an accommodation as part of the application process and any other correspondence will not receive a response. Lilly is proud to be an EEO Employer and does not discriminate on the basis of age, race, color, religion, gender identity, sex, gender expression, sexual orientation, genetic information, ancestry, national origin, protected veteran status, disability, or any other legally protected status. Our employee resource groups (ERGs) offer strong support networks for their members and are open to all employees. Our current groups include: Africa, Middle East, Central Asia Network, Black Employees at Lilly, Chinese Culture Network, Japanese International Leadership Network (JILN), Lilly India Network, Organization of Latinx at Lilly (OLA), PRIDE (LGBTQ+ Allies), Veterans Leadership Network (VLN), Women's Initiative for Leading at Lilly (WILL), en Able (for people with disabilities). Learn more about all of our groups. Actual compensation will depend on a candidate's education, experience, skills, and geographic location. The anticipated wage for this position is $151,500 - $244,200 Full-time equivalent employees also will be eligible for a company bonus (depending, in part, on company and individual performance). In addition, Lilly offers a comprehensive benefit program to eligible employees, including eligibility to participate in a company-sponsored 401(k); pension; vacation benefits; eligibility for medical, dental, vision and prescription drug benefits; flexible benefits (e.g., healthcare and/or dependent day care flexible spending accounts); life insurance and death benefits; certain time off and leave of absence benefits; and well-being benefits (e.g., employee assistance program, fitness benefits, and employee clubs and activities).Lilly reserves the right to amend, modify, or terminate its compensation and benefit programs in its sole discretion and Lilly's compensation practices and guidelines will apply regarding the details of any promotion or transfer of Lilly employees. #WeAreLilly

Senior Field Service Engineer (FSE) involved in vacuum heat treatment. This position will require varying extensive travel and working from the technical office in South Carolina and servicing clients throughout North America (90% US, some Canada Mexico) The FSE will be responsible for traveling to our client's locations (which include major manufacturers in Medical, Automotive, and Aerospace fields) Directing the Installation of the Furnace, and correct component connections for (Gas, Water, and Electricity) depending on the client Commissioning Vacuum tests after installation to ensure proper functionality of the Furnace Performing after sales services including (preventative/emergency maintenance and repair, Troubleshooting and leak detection) EDUCATIONAL REQUIREMENTS: Associate's Degree or Trade certificate equivalent in either of the following programs: Electronics engineering, Mechatronics technology, Mechanical engineering, Machine Tool technology, Industrial Maintenance Ability and willingness to be trained and learn the processes for quality control testing and instrument Calibration Ability and willingness to learn about Vacuum technology and it's Industrial applications High Mechanical/Electrical aptitude Basic PLC knowledge ( Siemens S7/ Allen Bradley) Experience with Industrial hand tools, power tools, drill presses and MIG/electrode welder Completion of Drug screen and background check

Nightwing provides technically advanced full-spectrum cyber, data operations, systems integration and intelligence mission support services to meet our customers' most demanding challenges. Our capabilities include cyber space operations, cyber defense and resiliency, vulnerability research, ubiquitous technical surveillance, data intelligence, lifecycle mission enablement, and software modernization. Nightwing brings disruptive technologies, agility, and competitive offerings to customers in the intelligence community, defense, civil, and commercial markets. **Principal Cyber Engineer** Nightwing provides technically advanced full-spectrum cyber, data operations, systems integration and intelligence mission support services to meet our customers' most demanding challenges. Our capabilities include cyber space operations, cyber defense and resiliency, vulnerability research, ubiquitous technical surveillance, data intelligence, lifecycle mission enablement, and software modernization. Nightwing brings disruptive technologies, agility, and competitive offerings to customers in the intelligence community, defense, civil, and commercial markets. **CODEX Overview** Nightwing's CODEX (Cyber Offense and Defense Experts) division brings together an elite team of mission-focused industry experts who are well known for their ability to overcome the most advanced technical challenges. The team comprises engineers of multiple disciplines including vulnerability research, reverse engineering, CNO/CNE development, hardware emulation, system engineering, and data analytics. Our engineers do more than just work with cutting-edge technology-they ensure missions succeed for our customers. CODEX offices span the nation and offer its engineers the ability to advance their careers through mentorship, training, and an expansive technical portfolio that covers every side of cyber. If you want to be part of a collaborative team that supports challenging, meaningful work that is vital to our national security, apply today! **Principal Cyber Engineer** Cyber Offense and Defense Experts (CODEX) is seeking a cyber engineer to join our team to solve real-time cyber challenges, working on site with our end users in their spaces. Applicants will join a team of developers building high impact native applications for mobile devices, with continuous and meaningful feedback from users. Applicants are expected to integrate reverse engineering results into development products and expand their knowledge of the mobile platform to meet development objectives and customer requirements. The place of performance for this work is at a Nightwing site in Greenville, South Carolina. **Technical Requirements** + Current TS clearance is required + Experience developing for Android or another mobile platform + At least 8 years of experience with C/C++ on Unix/Linux platforms using Make/CMake build systems + Familiarity with static decompilers (e.g HexRays) & disassemblers (e.g. Ghidra) + Experience developing against or working with large open-source projects (e.g. AOSP) **Desired Experience** + Team or task leadership experience + Understanding of CNE techniques and methodologies on Android and Linux + Experience with the ARM64/ARM32 Architecture or other similar platform + Familiarity with Atlassian products (Bitbucket, Bamboo, JIRA, etc.) + Familiarity with version control software such as git + Reverse engineering ARM binaries + Developing proof-of-concept exploit software **Education Requirements** Requires a degree in a technical discipline This position is not relocation eligible, but a signing bonus may be an option for the sufficiently qualified candidate. ERIN Eligibility - This requisition is eligible for an employee referral award. ALL eligibility requirements must be met to receive the referral award. \#CODEX _At Nightwing, we value collaboration and teamwork. You'll have the opportunity to work alongside talented individuals who are passionate about what they do. Together, we'll leverage our collective expertise to drive innovation, solve complex problems, and deliver exceptional results for our clients._ _Thank you for considering joining us as we embark on this new journey and shape the future of cybersecurity and intelligence together as part of the Nightwing team._ _Nightwing is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class._ _At Nightwing, we value collaboration and teamwork. You'll have the opportunity to work alongside talented individuals who are passionate about what they do. Together, we'll leverage our collective expertise to drive innovation, solve complex problems, and deliver exceptional results for our clients._ _Thank you for considering joining us as we embark on this new journey and shape the future of cybersecurity and intelligence together as part of the Nightwing team._ _Nightwing is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class._

Nightwing provides technically advanced full-spectrum cyber, data operations, systems integration and intelligence mission support services to meet our customers' most demanding challenges. Our capabilities include cyber space operations, cyber defense and resiliency, vulnerability research, ubiquitous technical surveillance, data intelligence, lifecycle mission enablement, and software modernization. Nightwing brings disruptive technologies, agility, and competitive offerings to customers in the intelligence community, defense, civil, and commercial markets. Principal Cyber Engineer Nightwing provides technically advanced full-spectrum cyber, data operations, systems integration and intelligence mission support services to meet our customers' most demanding challenges. Our capabilities include cyber space operations, cyber defense and resiliency, vulnerability research, ubiquitous technical surveillance, data intelligence, lifecycle mission enablement, and software modernization. Nightwing brings disruptive technologies, agility, and competitive offerings to customers in the intelligence community, defense, civil, and commercial markets. CODEX Overview Nightwing's CODEX (Cyber Offense and Defense Experts) division brings together an elite team of mission-focused industry experts who are well known for their ability to overcome the most advanced technical challenges. The team comprises engineers of multiple disciplines including vulnerability research, reverse engineering, CNO/CNE development, hardware emulation, system engineering, and data analytics. Our engineers do more than just work with cutting-edge technology-they ensure missions succeed for our customers. CODEX offices span the nation and offer its engineers the ability to advance their careers through mentorship, training, and an expansive technical portfolio that covers every side of cyber. If you want to be part of a collaborative team that supports challenging, meaningful work that is vital to our national security, apply today! Principal Cyber Engineer Cyber Offense and Defense Experts (CODEX) is seeking a cyber engineer to join our team to solve real-time cyber challenges, working on site with our end users in their spaces. Applicants will join a team of developers building high impact native applications for mobile devices, with continuous and meaningful feedback from users. Applicants are expected to integrate reverse engineering results into development products and expand their knowledge of the mobile platform to meet development objectives and customer requirements. The place of performance for this work is at a Nightwing site in Greenville, South Carolina. Technical Requirements Current TS clearance is required Experience developing for Android or another mobile platform At least 8 years of experience with C/C++ on Unix/Linux platforms using Make/CMake build systems Familiarity with static decompilers (e.g HexRays) & disassemblers (e.g. Ghidra) Experience developing against or working with large open-source projects (e.g. AOSP) Desired Experience Team or task leadership experience Understanding of CNE techniques and methodologies on Android and Linux Experience with the ARM64/ARM32 Architecture or other similar platform Familiarity with Atlassian products (Bitbucket, Bamboo, JIRA, etc.) Familiarity with version control software such as git Reverse engineering ARM binaries Developing proof-of-concept exploit software Education Requirements Requires a degree in a technical discipline This position is not relocation eligible, but a signing bonus may be an option for the sufficiently qualified candidate. ERIN Eligibility - This requisition is eligible for an employee referral award. ALL eligibility requirements must be met to receive the referral award. #CODEX At Nightwing, we value collaboration and teamwork. You'll have the opportunity to work alongside talented individuals who are passionate about what they do. Together, we'll leverage our collective expertise to drive innovation, solve complex problems, and deliver exceptional results for our clients. Thank you for considering joining us as we embark on this new journey and shape the future of cybersecurity and intelligence together as part of the Nightwing team. Nightwing is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class. At Nightwing, we value collaboration and teamwork. You'll have the opportunity to work alongside talented individuals who are passionate about what they do. Together, we'll leverage our collective expertise to drive innovation, solve complex problems, and deliver exceptional results for our clients. Thank you for considering joining us as we embark on this new journey and shape the future of cybersecurity and intelligence together as part of the Nightwing team. Nightwing is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.

Purpose: The Principal Metrology Engineer provides measurement services to support product development, benchmarking, production, and manufacturing process development for JTEKT North America. The role is primarily focused on current products and their mating components. Essential Duties and Accountabilities: Metrology fundamentals activities: Leads metrological work covering a variety of products and mating components. Performs or guides collection of measurements per established methods when available. Defines gaging methods when not previously established Properly interprets and applies GD&T to measurements; may be called upon to advise designers on use and application of GD&T to product prints. Suggests improvements to methods as appropriate. Resonsible for metrology equipment (with Metrology Consultant): Operation, calibration, and maintenance. Equipment includes TSK and Taylor Hobson. CMM is Sheffield, and there is a variety of other more specific instruments. Works with Metrology Consultant to identify trends and technology improvements; assists in the development of mid- and long-term metrology plan; participates in developing recommendations for purchase of new technology/machines as appropriate; assists with training technical staff to maintain/improve lab capability. Support of Production, Product Validation, and New Business Launches: Works alongside with Metrology Lab Manager, Metrology Consultant, and with Application and Product Engineering management to identify gaps in capability to support new product/business launches; directly supports and/or leads project teams (as appropriate) to develop new gages or gaging methods; trains staff in current and new techniques as needed/appropriate. Works with lab managers to secure technician support as needed. Perform other duties as assigned Supervisory Responsibilities This position has no direct supervisory responsibilities, though providing specific task direction to technicians is expected. May be called upon to participate or lead a Cross-Functional Project Team if required. Requirements: BS in Engineering (STEM) or equivalent; advanced degree preferred 10 - 15 years' experience Demonstrated expertise with metrology equipment, and data acquisition systems. Ability to troubleshoot problems with hardware and software Demonstrated expertise in programming of metrology equipment Recognized expertise with the application and interpretation of GD&T; gaging development Demonstrated skill with mechanical and electrical systems Experience with quality management systems, specifically TS16949 (ISO9001) Other Desirable Experience: Knowledge of bearing design, applications, manufacturing, and/or damage analysis Strong written and verbal communication skills Team skills TSK Calypso programming knowledge is a plus Work Environment/Physical Demands: Primarily office/Metrology Lab, but may occasionally require exposure to manufacturing areas which require the use of personal protective equipment such as safety glasses with side shields and mandatory hearing protection. Working with components up to 50 lbs PPE (when required): safety glasses, steel toe shoes, ear plugs, and requirements to follow all safety guidelines Majority of work required to be on site in Greenville Test Lab.

Civil Project Engineer Thomas & Hutton is a growing, well-established professional services firm providing consulting services throughout the southeast. We are an award-winning company that has been recognized as one of the best places to work in Georgia and South Carolina. Some of our many services include Civil, Environmental, Structural and Marine Engineering; Land Surveying; Land Planning; Landscape Architecture; Geographic Information Systems and Construction Administration. Thomas & Hutton has an opening for a motivated and driven Civil Project Engineer in Greenville, SC. The position requires a strong understanding of civil site design and development with previous experience working with water, sewer, and storm drainage infrastructure design projects. This position is responsible for permitting and performing design work and engineering calculations on civil site development projects. Excellent written and verbal communication skills required as regular client interaction is required in this role. Knowledge of Civil 3D software required. Education: Bachelors or Masters in Civil Engineering. Professional Engineer registration or ability to obtain registration within 6 months of hire required. Experience: 5+ years' experience in working in the field of Civil Engineering Design. Strong AutoCAD and computer-based civil design skills. Skills: Working knowledge of AutoCAD and Civil 3D software applications. Progressive experience in planning, design, and permitting of civil site design, drainage improvement, and small transportation projects. Ability to write technical specifications and bid documents Strong understanding of stormwater hydraulics and hydrology Strong understanding of how to effectively prepare grading and drainage plans and reports Ability to perform construction administration which includes construction site visits and coordination with the client and contractor Ability to communicate both verbally and in writing Proven ability to multi-task, appropriately prioritize workflow and complete tasks Highly client service oriented, self-starter, and team player Ability to solve problems Excellent time management skills The ability to work a regular schedule of 730AM - 530PM Mon-Thurs and 730AM - 1130AM Fri. with additional hours as needed to meet project deadlines. Please note, sponsorship is not available for this position. Thomas & Hutton is a Drug-Free Workplace & E-Verify Participant Thomas & Hutton's Mission Statement, “Relationships and Solutions for Success” describes not only our unwavering commitment to clients, but also our commitment to the success, both professionally and personally, of our employees. Thomas & Hutton was named to the Best Places to Work in South Carolina and Georgia by SCBIZ and Georgia Trend, and named One of the best Civil Engineering firms to work for by CE News/Zweig White. What makes Thomas & Hutton a great place to work? Opportunities for professional development, strong benefits and compensation packages, a commitment to make our communities better for future generations, a family-oriented culture, and our reputation as a firm with extremely knowledgeable professionals who serve as trusted advisors to our clients. Visit *********************** to learn more. Some of our many benefits include: Superior Health, Dental, Vision, and Rx Insurance Programs Condensed work schedule Generous base compensation and bonus plan Retirement Plans Generous paid time off and holidays Thomas & Hutton University - On-site provider of professional development hours and continuing education credits College tuition reimbursement programs (Graduate & Undergraduate) In-house Up and Ready Civil 3D Software Training Program We are an equal opportunity employer. Qualified minorities, women, veterans and individuals with disabilities are encouraged to apply. If you want to view the EEO is the Law poster, please choose your language: English - Spanish - Arabic - Chinese

We are AUTOKINITON AUTOKINITON is a Michigan-based family of automotive companies delivering operational excellence, high-quality execution, and customer service. We offer 100% vertical integration capabilities such as end-to-end engineering, manufacturing, and in-house logistics. We're proud of our Tier 1 supplier legacy for manufacturing propulsion-agnostic, structural automotive components, and assemblies around the globe. To help us drive excellence, you'll get to: * Support new program equipment launch activity as it relates to startup, debug and achieving performance objectives. * Maintain a strategy for redeployment and/or obsolescence of exiting robot assets as it pertains to age, hours, application, etc. * Create Robot training modules tailored to the needs of the maintenance department. * Maintain PM tracking matrix for hours, greasing, battery, and counterbalance greasing for all Robots. * Be capable of troubleshooting and repairing breakdowns of equipment using PC/PLC ladder logic * Troubleshoot Technical/Mechanical concerns on equipment and support other skilled trades as required. * Maintain spare parts and life cycle maintenance schedule. This salary role is a part of our maintenance team and reports to the Maintenance Manager. Required experience: * Five (5) to (8) years of technical hands-on experience related. * Robot programming languages at an advanced level. * Fanuc robot teaching and mechanical knowledge. * Ability to work independently, self-starter with the ability to work in a fast-paced environment. * Self-starter and ability to work productively for long periods of little to no supervision * Excellent problem-solving skills such as 8D and 5 Whys. * Excellent organizational, analytical and communication skills. * Ability to prioritize responsibilities in a fast-paced environment. * Ability to mentor and teach the team in effective problem-solving methods. Working conditions: * We'll provide position-specific details including physical and focused efforts, working environment and conditions, and reasonable accommodations during the interview process. Where you'll be: This position is located at our Greenville facility in Fountain Inn, South Carolina offering many community events, resources, programs, and recreational opportunities for you and your family. Community features: * Greenville SC is located situated in the foothills of the Blue Ridge Mountains, approximately halfway between Atlanta, GA and Charlotte, NC. * Falls Park on the Reedy has riverside gardens, a suspension bridge and waterfall views. * Crystal-clear lakes, pristine waterfalls and gorgeous mountain vistas make the Upcountry a destination all its own. Why you'll enjoy working here: * Competitive Wages and Comprehensive Benefits: Medical, Dental, Vision, 401(k) with Company contribution match, and 14 paid holidays, including a bridge holiday in December. * Work-Life Balance: Many of our Associates have stayed with us for 25+ years! It takes a good work-life balance to make it that far. We support your personal and professional priorities as they impact your well-being. * Growth Opportunities: Take your career to the next level through tuition reimbursement programs, on-the-job training, learning management systems, and advancement opportunities from within our organization. * Learning and Development: We empower all our Associates - from entry-level to senior-level - with the skills and knowledge necessary to succeed in their current roles and beyond at AUTOKINITON. AUTOKINITON Promotes a dynamic and collaborative work environment for everyone. AUTOKINITON is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. AUTOKINITON makes hiring decisions based solely on qualifications, merit, and business needs at the time. Posted Date 11/21/2025

· Provides technical expertise and develops technical solutions (configuration, performance estimation, economics, etc.) as part of the ITO (Inquiry to Order) process while interfacing with the commercial and sales teams. This includes a technical analysis of client need: definition and optimization of the products; scope; schedule; industrial scheme; cost, considering contract and internal policies and procedures. · Responsible for interpreting customer needs and defining the parts scope of supply and input for cost and cycle for assigned technical proposals · Participate and lead continuous improvement activities such maintenance or development of assigned TAG (technical application guideline) codes. · Responsible for successful execution of the engineering and related downstream activities for the overall CM&U order/project. · Provide appropriate solutions to developing technical issues arising during CM&U project. · Utilize standardized tools and process to set up project structure within different GE systems. · Create and coordinate the overall engineering and drafting deliverable schedule using Enovia PLM software. Manage changes over the lifecycle of the project to ensure timely delivery to support parts delivery, outage activities, or other downstream work. · Ensure timely demand placement of parts designed and defined by engineering teams. · Author Field Modification Instruction (FMI) documentation · Integrate with Project Management, Engineering, Manufacturing and Sourcing, Vendors, Service Shops and other teams as necessary to ensure a successful project. · Keep attention to the overall project schedule and budgeted hours. Address and correct deviations as they arise. · Support other team members both domestically and globally. · Provide timely and accurate responses to technical inquiries using technical files (such as Design Data, Previous Reports, etc.), personal experience/knowledge and information from other technical experts as necessary. · Complete project closeout activities including gathering feedback and data to support continuous improvement. Additional Skills & Qualifications - Bachelor's Degree in Engineering or related engineering/science or equivalent knowledge/experience. Knowledge of the Legacy Alstom Gas Turbine technology · Knowledge of the GE Gas Turbine product portfolio. · Knowledge in the Gas Turbine Requisition process. Experience Level Intermediate Level Job Type & Location This is a Contract position based out of Greenville, SC. Pay and Benefits The pay range for this position is $85000.00 - $95000.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a hybrid position in Greenville,SC. Application Deadline This position is anticipated to close on Jan 20, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

* Drive product enhancements and improvements on sensor products, accessories, and their associated digital tools. * Test sensor products and digital tool features before releases and create/update supporting documentation. * Provide product and application-based technical customer support for IIOT Technologies customers via phone, email, chat, and video conferencing. * Establish and maintain extensive BOM"s. * Provide product selection and installation support and find creative solutions to customer issues. * Drive product enhancements and improvements on sensor products, accessories, and their associated digital tools. * Collaborate with other functional areas, including product management, R&D, and quality, to ensure overall alignment. * Support warranty and quality functions. * Occasional travel as required. Travel to provide on-site customer support, including product training, installation support, and troubleshooting. * Create, use, and maintain software programs to help facilitate customers" requests and make daily tasks more efficient. * Completed a mechanical engineering (or mechanical engineering technologies), Electrical engineering bachelor"s degree program, Computer Science or possibly Manufacturing/IIOT engineering * Focus on customer interaction and satisfaction * Strong analytical skills with an emphasis on critical thinking, root cause analysis, and problem solving * Attention to detail with a strong sense of ownership and responsibility * Excellent written and verbal communication skills * Collaborates well with others and is a good team player * Entrepreneurial spirit with a passion for new and changing ideas Preferred: * Fluent in Spanish * IIOT or IOT expereince * Familiarity with basic mechanical concepts and systems * Familiarity with IT infrastructure * Familiarity with Android and iOS devices * Basic programming experience with Visual Studio, Python, ASM, and Java * Willingness to learn and adapt new skills * Understanding/Experience in vibration analysis

Project EngineeringTechnician I South Carolina Full- Time - Entry-Level Overview of Bunnell-Lammons Engineering, Inc. At Bunnell-Lammons, Inc. (BLE), every member of our team has a personal stake in ensuring the success of our clients. As employee-owners of the firm, we are all personally accountable for building lasting relationships and delivering outstanding results. We put people first, whether that's our clients, our employees, or our community. It's why we listen more and work harder to understand the unique needs of our clients. And it's why we prioritize the career development of every individual on our team. People are why we do this, and why we love what we do. We are at our best when we work together. That means bringing together a diverse team of talented, passionate, multidisciplinary experts to collaborate closely with clients to create comprehensive solutions to complex problems. We believe that by working together, no problem is insurmountable. Notice to applicants: Background checks are conducted as part of any conditional offer made, including (but not limited to & role dependent) education, professional registration, employment, references and global watchlist screening. To be a considered applicant: Applicants must be authorized to work in the United States without sponsorship and able to interview on site where the position is located. Job Description As a Project Engineering Technician I for Bunnell-Lammons Engineering, Inc. (BLE), you will be working under the immediate supervision/direction of a registered professional engineer. You will work as a team member alongside site managers and engineers to perform the required inspection or sampling services. Our special Inspections technicians play a critical role in the quality assurance for every construction project no matter how large or small. Special Inspections Technicians actively collect concrete, soil, and other site materials for testing along with the continuous monitoring of general contractor activities, which may include but are not limited to onsite testing and reporting of earthwork and soil construction; foundation/subgrade evaluation; reinforcing steel; concrete placements; masonry as well as asphalt testing. Special Inspections Technicians are also responsible for accurately preparing daily reports for submission to the assigned project engineer. These reports not only include your test results summary, but detailed construction site observations as well. Minimum Job Requirements Must be at least eighteen (18) years of age. High School Diploma or General Education (GED) Valid Driver's License with Clean Motor Vehicle Driving history (3 years) Ability to work outdoors on a construction site in all seasons and weather conditions for extended periods of time. You must be self-motivated, able to efficiently work independently while completing scheduled tasks. Must be able to effectively communicate both verbally and in writing with team members, BLE leadership, clients, local, state, and federal authorities of all levels. Must be detail oriented and work in a time conscious and time effective manner. Basic knowledge in the operation of smartphones and computers for communication and record keeping (MS Office applications Word, Excel, and Outlook). Ability to stand, walk, kneel, stoop, bend, lift (50 pound), tug and pull, on unstable, unpaved ground. Applicant Requirements All newly employed Special Inspection Technicians are mandated to acquire the Special Inspector general Requirements Certification and one of the three (3) additional certifications within three (3) months of beginning the position, and the remaining two (2) certifications within the following eighteen (18) months, such that the technician has acquired, within two (2) years, the following certifications: Special Inspector general Requirements Certification - GR (Within three (3) months of employment)). Reinforced Concrete Codes -47C Plans - 47P Structural Masonry Codes - 84C Plans - 84P Soils Codes - ECC Soils Plans - ECP Preferred Qualifications Two years of previous construction materials inspection Industry certified inspector Benefits Medical/Vision/Dental 401(K) with partial company matching. Life Insurance Short/long term disability Paid vacation Paid sick leave. Eight (8) paid holidays. Company Vehicle/gas card Time and a half overtime pay. 100% of travel expenses are covered by BLE. Education re-imbursement program(s) Employee referral program Certification bonuses Visit: *************** and/or connect with BLE on LinkedIn Job Posted by ApplicantPro

Senior Civil Engineer - Industrial Site Development (Hybrid / Multiple U.S. Locations) We are seeking an experienced Civil Engineer with a strong background in the planning, analysis, and design of medium to large-scale industrial site development projects. This role offers the opportunity to work on high-impact projects within a collaborative, multidisciplinary environment. The position is hybrid and can be based out of any major U.S. metro area where the organization maintains an office. Key Responsibilities Lead and support site development and master planning efforts for industrial facilities. Perform grading and earthwork design using AutoCAD Civil 3D, including cut/fill analysis and earthwork balancing. Prepare erosion and sediment control plans, stormwater pollution prevention plans (SWPPP), and coordinate related permitting. Conduct hydrologic and hydraulic analysis to design storm drain and stormwater management systems. Design underground utilities, gravity sewer systems, and perform site space planning. Interpret and apply local Authority Having Jurisdiction (AHJ) requirements for design and construction across various regions. Utilize stormwater modeling software (e.g., StormCAD, CivilStorm) to support system design. Collaborate effectively with cross-disciplinary engineering teams, project managers, and clients. Required Qualifications Bachelor's degree in Civil Engineering (or equivalent experience). Professional Engineer (PE) license required. 10+ years experience in civil/site development, ideally supporting industrial or large-scale commercial projects. Strong proficiency in AutoCAD Civil 3D, including all major sitework design modules. Experience using Navisworks and Bluebeam in project coordination and review workflows. Excellent analytical, problem-solving, and communication skills. Ability to work effectively both independently and within multi-disciplinary teams. Demonstrated ability to learn quickly and expand technical capabilities. Preferred Candidate Profile Ideal candidates will come from mid-to-large EPC or A/E environments, such as: Fluor KBR AECOM / CH2M Hill Wood / Amec Foster Wheeler Shaw / other large industrial-focused design firms Work Environment & Location Hybrid schedule with flexibility. May be based in any U.S. metro area with a company office presence. Opportunity for career growth, continued training, and work on complex, globally impactful industrial projects. Please send your resume to hmccormick@selectek.net for consideration.

Do you have a passion for leveraging data, analytics, and AI to drive meaningful change? At GE Aerospace, we are transforming supply chain processes to address one of our most critical business challenges: delivery. As a Staff Enterprise Application Engineer specializing in Palantir, you will utilize your expertise in Palantir Foundry and AWS cloud technologies to design, deploy, and tailor solutions for complex aerospace challenges. In this role, you will build and maintain Foundry pipelines, modular applications, and workflows, while working closely with stakeholders to create cutting-edge solutions using ontology, advanced analytics, and AI. **** **Roles and Responsibilities** + Architect and design sound/supportable technical solutions to complex business requirements + Develop and maintain Foundry pipelines using Pipeline Builder to ingest, transform, and integrate data. + Build modular applications and workflows leveraging Python, and Foundry AIP. + Collaborate with data engineers, analysts, and stakeholders to refine data models and ontology mapping. + Assist in Foundry workshops to guide stakeholders through platform capabilities. + Support testing, debugging, and performance tuning of Foundry applications. + Work with aerospace data to identify patterns, trends, and insights using Palantir Foundry and AWS analytical tools. + Develop custom applications and workflows within Foundry and AWS to address specific challenges. + Ensure data integrity and compliance with aerospace industry standards. + Apply lean methodologies to identify opportunities for process improvement. + Share feedback with Palantir and AWS product teams to enhance tools and workflows. + Provide technical coaching and direction to more junior teammates. **Technical Qualifications** + Strong experience in Python, PySpark, and front-end frameworks like React, Angular, or Vue.js. + Experience with Pipeline Builder, AIP, and Foundry's application development ecosystem. + Proficiency in AWS cloud services such as EC2, S3, Lambda, RDS, and CloudFormation. + Experience with Git-based code repositories and CI/CD workflows. **Minimum Qualifications** + Bachelor's degree from accredited university or college with minimum of 4 years of professional experience OR associate's degree with minimum of 7 years of professional experience OR High School Diploma with minimum of 9 years of professional experience + Minimum 3 years of professional experience in Computer Science or "STEM" Majors (Science, Technology, Engineering and Math) + **Note:** Military experience is equivalent to professional experience The base pay range for this position is $110,700- $184,600. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on October 31, 2025. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs ( _i.e_ ., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. **Eligibility Requirement:** + Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job. **Desired Characteristics** + Ability to operate in an ambiguous environment as we establish this transformation program and define roles & responsibilities. + Demonstrated ability to quickly understand new concepts and analyze system deficiencies + Passionate about security and the quality of the applications they support + Organized, thorough, and detail oriented + Collaborates well with others to solve problems and actively incorporates input from various sources + Eager to learn, shares ideas, encourages and accepts feedback well + Strong analytical skills - strong problem-solving skills, communicates in a clear and succinct manner and effectively evaluates information / data to make decisions; anticipates obstacles and develops plans to resolve + Demonstrated customer focus - evaluates decisions through the eyes of the customer; builds strong customer relationships and creates processes from the customer's viewpoint + Experience working with an offshore development team + High level of energy and enthusiasm, with the ability to thrive in a dynamic, fast-paced setting + Comfortable with empowering colleagues and inspiring others to be their best **Note:** To comply with US immigration and other legal requirements, it is necessary to specify the minimum number of years' experience required for any role based within the USA. For roles outside of the USA, to ensure compliance with applicable legislation, the JDs should focus on the substantive level of experience required for the role and a minimum number of years should NOT be used. This Job Description is intended to provide a high-level guide to the role. However, it is not intended to amend or otherwise restrict/expand the duties required from each individual employee as set out in their respective employment contract and/or as otherwise agreed between an employee and their manager. **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Insight Global is looking for a Project Engineer to join their team. Below is an overview of the daily responsibilities: - Providing technical guidance to Project Management and Applications/Regional Customer Applications Engineering - Conducting Customer Kick-Off Meetings (CKOMs) and/or Design Liaison Meetings (DLMs) with customers and/or their design representatives (EPCs) - Reviewing contract documentation and communicating project requirements to all design functions, utilizing internal documentation systems and regular communication with internal engineering organizations - Mitigating engineering schedule issues and taking preventative action to avoid delivery delays or late customer deliverables - Providing technical support to engineering, manufacturing, sourcing, suppliers, and installation personnel to ensure equipment meets all customer requirements and business objectives - Supporting resolution of cross-functional design complexities and working to resolve technical issues - Providing technical support to engineering, manufacturing, sourcing, suppliers, and installation personnel to ensure equipment meets all customer requirements and business objectives We are a company committed to creating diverse and inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity/affirmative action employer that believes everyone matters. Qualified candidates will receive consideration for employment regardless of their race, color, ethnicity, religion, sex (including pregnancy), sexual orientation, gender identity and expression, marital status, national origin, ancestry, genetic factors, age, disability, protected veteran status, military or uniformed service member status, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to ********************.To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: **************************************************** Skills and Requirements Bachelor's Degree in Engineering from an accredited college or university OR a high school diploma/ GED with 5 years of relevant experience Minimum 2 years of experience in Project Engineering, Design Engineering, and/or Field Engineering related to Gas Turbine Projects Experience and/or knowledge of plant system design engineering, manufacturing, assembly, installation, and/or testing Ability and willingness to manage multiple priorities simultaneously and have creative problem solving Customer-facing experience Process improvement mindset Ability and willingness to travel, as required ~10%

COURSER accelerates the growth of IT service provider companies. We forge dynamic partnerships, leveraging our values of Teamwork, Service, Growth-Mindedness, Trust, and Innovation to deliver impactful solutions and phenomenal customer experiences. If you thrive in a fast-paced IT environment, join our rapidly expanding team and contribute to our ongoing success. Project Engineer II The Project Engineer II is responsible for implementing and configuring IT solutions to meet client needs. This role involves conducting technical assessments, deploying infrastructure and cloud services, troubleshooting complex issues, and ensuring client satisfaction. The Project Engineer II collaborates with project managers, senior engineers, and clients to deliver high-quality projects on time and within budget. Key Responsibilities: · Collaborate with clients, project managers, and internal teams to define project scope, objectives, and timelines. Develop detailed project plans, allocate resources, and set milestones to ensure timely delivery. · Provide technical direction and hands-on implementation for IT projects, including network infrastructure, cloud services, hardware, software installations, and other IT solutions. · Work directly with clients to understand their technical requirements, challenges, and goals. Serve as the main technical point of contact throughout the project lifecycle. · Design and configure IT systems, networks, and infrastructure that meet client requirements, using industry best practices and ensuring scalability, reliability, and security. · Oversee the execution of IT projects, ensuring technical specifications are met, and that the project is delivered on time, within budget, and in line with the scope. · Configure, test, and implement new systems, software, and technologies, ensuring that all solutions work seamlessly and meet client expectations. · Address any technical issues that arise during project implementation, working quickly and effectively to resolve problems and minimize disruptions. · Maintain detailed documentation of all systems, configurations, and processes related to each project, including setup guides, architecture diagrams, and post-implementation reports. · Provide training and guidance to clients and internal teams on new systems and technologies implemented as part of the project. · Report on project status to stakeholders, including progress updates, potential risks, and solutions to ensure client satisfaction and project success. · Offer post-project support, including troubleshooting, system optimization, and helping clients with ongoing maintenance or future upgrades. Qualifications: · Bachelor's degree in Computer Science, Information Technology, or a related field. · Preferred 3-5 years of experience in IT infrastructure implementation, ideally within an MSP or similar environment. · Proficiency in network infrastructure, server configuration, virtualization, and storage solutions. · Strong understanding of cloud platforms (AWS, Azure, GCP) and virtualization technologies (e.g., VMware, Hyper-V). · Experience with firewalls, VPNs, load balancers, and network security best practices. · Scripting ability in PowerShell, Python, or similar languages for task automation. · Familiarity with configuration management tools, such as Ansible, Chef, or Puppet, is an advantage. · Proven track record in delivering technical projects, including hands-on configuration and troubleshooting. · Experience in client-facing roles, with a focus on meeting client needs and managing project expectations. · Strong problem-solving and analytical skills with attention to detail. · Excellent communication skills for interacting with clients and collaborating with internal teams. · Ability to manage multiple tasks and projects, working independently and as part of a team. · Commitment to continuous learning and staying current with emerging technologies. Preferred Skills: · AWS Certified Solutions Architect - Associate or Microsoft Certified: Azure Solutions Architect. · VMware Certified Professional (VCP). · CompTIA Network+, CompTIA Security+, or other relevant certifications. Why you'll love working here At COURSER, we prioritize the personal and professional development of our employees. We offer best-in-class training, mentorship, and clear self-promotion paths to help you grow. We foster a culture of innovation and encourage challenging the status quo. With teams located across the country, we leverage a wealth of knowledge and a collaborative spirit, eager to share and grow together. Benefit Highlights · Competitive benefits package, including medical, dental, vision, and life insurance · 401k match · Unlimited vacation time* · Paid sick time · 10 Holidays including your Birthday and a Floating Holiday! · Healthy Lifestyle reimbursement · Amazon Prime reimbursement · 40 Hours for Volunteer Time · Paid parental leave · Reimbursement for ongoing education and certifications · Learning and development programs *Unlimited vacation time after completing one full year of employment. For the first year of employment, full-time team members are provided 10 vacation days. COURSER is an Equal Opportunity Employer. We support diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, creed, religion, sex, sexual orientation, gender, gender identity, genetic information, national origin, citizenship status, marital status, age, physical or mental disability, caregiver status, veteran status, uniformed service member status or any other category protected by applicable federal, state, or local laws. Powered by JazzHR ecose Umpy9