Project engineer jobs in Reading, OH

Immediate need for a talented PCB Design Engineer. This is a 11+ months contract opportunity with long-term potential and is located in Cincinnati, OH(Onsite). Please review the job description below and contact me ASAP if you are interested. Job ID: 25-94418 Pay Range: $55 - $58/hour. Employee benefits include, but are not limited to, health insurance (medical, dental, vision), 401(k) plan, and paid sick leave (depending on work location). Key Requirements and Technology Experience: Key skills; PCB, Design Validation, Embedded Systems Development and qualification of electromechanical components such as Switch assemblies, cable assemblies, PCBAs. Understand Measurement Systems analysis and understanding of establishing calibration requirements. Work with suppliers to meet established cost, quality, and performance requirements. Work with suppliers on component qualification activities and monitor the execution. Understand and conduct Design of Experiments, Process Stability / Control / Capability methods, etc. for process characterizations/mfg./equipment development Effective communication with suppliers on design requirements and process capability needs Position may require up to 30% travel both domestic and international. Board Bring-up Design review, DFMEA, DFM & Board Revision Low-level Embedded drivers development for on-board peripherals & Motor control Schematics & BOM updates for PCBAs Write Module test plan and execution Writing Engineering Studies for board level & device level testing Design Transfer Test Engineering scope: Writing Test Specs for ICT/ FCT Liaison technical discussions between supplier & design team and resolve stumbling blocks Design review of Hardware & fixture for Functional Testers ICT/ FCT Qualification and deployment on plant Our client is a leading IT Industry, and we are currently interviewing to fill this and other similar contract positions. If you are interested in this position, please apply online for immediate consideration. Pyramid Consulting, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. By applying to our jobs you agree to receive calls, AI-generated calls, text messages, or emails from Pyramid Consulting, Inc. and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here.

What You'll Do As a Design Engineer, you will support the account management team throughout the pre-sales process. You will be responsible for delivering complete system designs and associated documentation. This will include the Scope of Work, Bill of Materials, Labor Estimates, and High-Level System Sketches in accordance with company and departmental standards. You will also act as the technical subject matter expert for the account managers, and other departments as needed. Day-to-Day Responsibilities · Develop system designs based on customer requirements and needs analysis · Develop proposal documentation package (SOW, BOM, Sketches, etc.) for account management · Attend calls and/or site visits as technical subject matter expert with account manger · Review pre-construction site design and architectural documentation · Identify logistical requirements or challenges with executing proposed system design · Develop design documentation for custom hardware · Provide advanced engineering support to project delivery teams as required · Attend manufacturer and industry training to remain up to date on technologies, trends, and design requirements What We Are Looking For Must-Haves · Minimum two (2) years of demonstrated AV/IT system design experience · AVIXA CTS certification · Demonstrated IP network design/architecture experience · Enterprise Video Teleconference and Unified Communications design experience · First-hand experience configuring, programming, and supporting audio, video, and control systems · Ability to work and think independently to meet deadlines and delivery requirements · Strong interpersonal communication skills · Business and technical writing skills · Proficiency with Microsoft Visio, AutoCAD, Revit, and Bluebeam Nice-to-Haves · Formal education in electronics or related fields preferred · AVIXA CTS-D and/or BICSI RCDD certifications · Manufacturer audio, video, and control system certifications

Note: Looking for USC / GC We are seeking an experienced PCB Design Engineer to support the development, qualification, and test engineering of electromechanical medical device components. This role involves hands-on PCB design, board bring-up, supplier collaboration, design transfer, and manufacturing test readiness in a regulated environment. Key Responsibilities PCB Design & Hardware Development Design and develop PCBAs for electromechanical components including switch assemblies and cable assemblies. Perform schematic design, BOM creation, and updates for PCBAs. Support board bring-up, debugging, and board revisions. Conduct design reviews, DFMEA, DFM, and implement design improvements. Develop low-level embedded drivers for on-board peripherals and motor control. Supplier Collaboration & Qualification Work closely with suppliers to meet cost, quality, and performance targets. Lead and monitor component qualification activities with suppliers. Communicate design requirements and process capability expectations effectively. Act as a technical liaison between suppliers and internal design teams. Manufacturing & Process Engineering Apply Measurement System Analysis (MSA) and establish calibration requirements. Conduct Design of Experiments (DOE), process stability, control, and capability studies. Support process characterization, manufacturing readiness, and equipment development. Lead design transfer from development to manufacturing. Testing & Validation (Test Engineering Scope) Write and execute module-level test plans. Develop engineering studies for board-level and device-level testing. Create test specifications for ICT (In-Circuit Test) and FCT (Functional Circuit Test). Review and approve hardware and fixture designs for functional testers. Support ICT/FCT qualification and deployment at manufacturing plants. Troubleshoot test issues and resolve technical roadblocks during deployment. Required Skills & Qualifications Strong experience in PCB design and board bring-up. Hands-on knowledge of DFMEA, DFM, DOE, MSA, and process capability methods. Experience working with ICT/FCT test development and qualification. Familiarity with embedded systems and low-level driver development. Strong supplier management and cross-functional communication skills. Experience in regulated industries (medical devices preferred). Nice to Have Experience with motor control systems Prior exposure to Johnson & Johnson or medical device standards International supplier collaboration experience

We're looking to hire a talented Lead Engineer I or a Process Engineer II with experience in oral solid dosage to help develop innovative treatments for chronic diseases. Apply today-this is your chance to make a real impact in healthcare! Relocation assistance is available! Pay: $95k-$115k for the Lead Engineer I $85k-$100k for the Process Engineer II Location: Wilmington County, Ohio Responsibilities: Support the scale-up and transfer of oral solid dosage formulations and processes to the production facility Design and recommend equipment purchases Troubleshoot and maintain manufacturing systems, processes, and equipment Identify and implement process and equipment improvements Develop and implement SOPs Author high-quality technical protocols/reports (engineering studies, summary reports, equipment specifications, change controls, and investigations) Requirements: Lead Engineer I: BS degree in Engineering or technical discipline 5+ years of OSD pharmaceutical experience Experience with OSD equipment procurement Knowledge of cGMP, OSHA, EPA and FDA facility requirements and regulations Knowledge of OSD operations, statistics, equipment design, process control, process scale-up, and equipment validations Experience in statistical analysis Process Engineer II: BS degree in Engineering or technical discipline 2-5 years of OSD pharmaceutical experience Experience with OSD equipment procurement Knowledge of cGMP, OSHA, EPA and FDA facility requirements and regulations Knowledge of OSD operations, statistics, equipment design, process control, process scale-up, and equipment validations Experience in statistical analysis We strongly encourage candidates who have some of the skills to apply. We look forward to a conversation to learn more about you!

Senior Azure Cloud Engineer - Location: Hybrid onsite 2-3 days per week in Cincinnati, OH 45245 (Eastgate mall Batavia) - 6 Month Contract to Hire - Must be Green Card or US Citizen - Pay: $80-$90 per hr W-2 Conversion Salary ($150k - $160K) CBTS is searching for a Senior Azure-focused Cloud Engineer to design, deploy, and maintain the cloud infrastructure that supports these systems. This role ensures reliability, performance, scalability, security, and operational continuity across multiple applications, environments, and services. You will be responsible for building the underlying platform that allows engineering teams to deliver features quickly and securely-while enabling the ecosystem to scale. Responsibilities: Cloud Infrastructure & Architecture Design and implement Azure-based infrastructure for: APIs (Azure App Service) MAUI + Blazor application backends Databases (Azure SQL) Blob storage for media and timing data Azure Functions (event-driven workloads) Identity & Access Management (Azure AD / Managed Identity) API Management (APIM) Build secure, resilient, highly available cloud environments for production, staging, and development. DevOps & CI/CD Maintain GitHub Actions or Azure DevOps pipelines for: Automated builds Automated deployments Database migrations Artifact and container management Support infrastructure-as-code (IaC) using: Bicep ARM Terraform (optional) Security & Compliance Implement cloud security best practices: Azure Key Vault for secret management Role-based Access Control (RBAC) Network Security Groups and firewalls Managed Identities for services Zero-trust access flows Manage API throttling, DDoS protection, and monitoring alerts. Observability & Monitoring Implement monitoring and alerting with: Azure Monitor Application Insights Log Analytics Create diagnostic dashboards for: API health Latency Errors Throughput Live event traffic (race-day spikes) Performance & Scalability Tune SQL and App Service performance. Support auto-scaling rules for high-demand racing events. Optimize storage, cold/warm data tiers, and retention policies. Ensure low-latency real-time updates (SignalR-backed services). Operational Responsibilities Manage incident response and root cause analysis. Implement backup, restore, and disaster recovery procedures. Work with backend/frontend teams on deployment readiness. Enforce environment standards and configuration consistency. Maintain cloud documentation, runbooks, and architecture diagrams. Requirements Technical Skills 3-7+ years in cloud engineering, DevOps, or infrastructure roles. Strong experience with Azure services: App Service Azure SQL Storage Accounts (blobs/queues/tables) Azure Functions VNETs, networking, firewalls API Management Azure AD / Entra ID Key Vault Monitoring & Application Insights Experience with CI/CD: GitHub Actions or Azure DevOps Deployment slots Automated migrations Infrastructure-as-Code experience (Bicep/ARM/Terraform). Strong understanding of security, identity, and environment isolation. Nice to Have Experience supporting .NET/Blazor/MAUI app deployments. Familiarity with Clean Architecture and modular monolith patterns. Understanding of real-time systems (SignalR). Experience with containerization (Docker) and Azure Container Apps or AKS. Experience with Sports technology or IoT-like hardware integrations. SQL performance tuning experience. Soft Skills Strong communication and documentation skills. Ability to work cross-functionally with developers, designers, and leadership. Operates with high ownership and problem-solving initiative. Thrives in a fast-paced, evolving startup-style environment. CBTS provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a protected veteran in accordance with applicable federal, state and local laws.

Senior Mechanical Engineer (PE) - Industrial & Commercial HVAC/Process Systems KODIAK Construction Recruiting & Staffing Cincinnati Metropolitan Area (On-site) Senior Mechanical Engineer (PE) - Industrial & Commercial HVAC/Process Systems in Cincinnati, OH We're hiring a licensed Mechanical Engineer (PE) with deep expertise in hydronic systems-water and steam boilers, chilled water, and full HVAC system design-for complex industrial and commercial environments. This role owns the design, analysis, and stamping of mechanical systems while supporting project managers, sales, and field operations to deliver code-compliant, construction-ready solutions. Key Responsibilities Lead mechanical and hydronic system design for design-build projects. Review, seal, and approve permit-ready drawings (Ohio PE required). Provide engineering oversight and mentor junior designers. Ensure all designs meet IMC, IFGC, ASHRAE, and energy code requirements. Develop calculations and system models using Carrier HAP, AutoCAD, Revit, and Excel. Support QC reviews and participate in client-facing technical meetings. Apply engineering expertise in process steam, process piping, and process water systems for industrial and/or food-grade facilities. Qualifications Ohio PE License (required); KY/IN PE or ability to obtain within 12 months. 5+ years of mechanical/HVAC design experience with strong hydronics competency. Experience with industrial process systems; ammonia refrigeration experience is a plus. Proven commercial/industrial project background. Proficient in load calculation software and CAD/Revit platforms. Strong code knowledge and design best practices. What's In It for You Competitive compensation + 401(k) with company match Medical, dental, vision, life, disability Tuition reimbursement + PE license support Paid vacation, sick leave, and holidays National resources backed by local leadership Seniority Level Mid-Senior level Industry Construction HVAC and Refrigeration Equipment Manufacturing Employment Type Full-time Job Functions Engineering Skills Revit Mechanical Systems Computer-Aided Design (CAD) Industrial Engineering Hydronics Ammonia Refrigeration Commercial Projects Boilers Chilled Water HVAC

Title: Electrical Engineer FullTime Key Responsibilities Design, test, and validate hardware and analog circuits. Perform PCB design and analysis using CAD tools. Conduct diagnostics, root cause analysis, and repair/refurbishment activities. Support CGD projects to certify electronics for nuclear and other regulated industries. Collaborate with a small, entrepreneurial team to solve customer challenges. Adapt quickly to new tools, technologies, and client demands. Qualifications Must Have (1 or more of the following): Hardware design experience PCB (CAD) design expertise Electronics testing experience Analog circuit design experience Bachelor's degree in Electrical Engineering (ABET-accredited EE program required; technology

-Design life safety and asset protection systems using AutoCAD and proprietary software applications, adhering to local, national, and manufacturer requirements. -Direct contractors in the proper installation and operation of systems. -Survey job sites to ensure proper system design and installation. -Read, review, and implement customer-supplied project specifications. -Attend manufacturer training classes and other continued education training -Create project-specific operation and maintenance manuals. -Update existing drawings. -Assist office staff with engineering-related tasks such as process improvement. -Assist with system inspection and maintenance (if needed). -Assist in system startups and commissioning (if needed). Qualifications: -Previous experience in the Fire Protection Industry is required -Previous experience as a Design Engineer -Proficient knowledge of AutoCAD 2D drafting. -Knowledge and efficient use of 3D design software. -Understanding of MS Office applications. -Good organizational skills. -Ability to communicate technical information. -Desire to learn industry standards. -Willingness to study for and obtain NICET certification.

As a Project Manager with Graycor Industrial Constructors' Metals division, you will have the authority to drive successful project results, moving your projects from preconstruction through final closeout in the safest manner possible while maintaining the highest quality standards. Our Metals division provides construction and industrial maintenance services to steel mills and other metal producers. At Graycor, You Will Have the Opportunity to: Ensure all safety compliance and quality programs are being executed on the project site. Safety is one of our core values. Actively participate in bidding and pre-construction services. Represent Graycor as the client's contact. Openly and confidently communicate with all other parties involved with the project, establishing trust and rapport with owners, engineers, subcontractors, and local union officials. Manage the performance of the professional support personnel on the project site. This typically includes Project Engineers, Field Superintendents, and administrative staff. Maintain strict control over the budget and keep project on schedule, ensuring ongoing profitability. Execute subcontracts and purchase orders, and approve subcontractor invoices and change requests. Negotiate contract changes with the client. Complete close-out requirements for projects. Mentor and train Project Engineers to ensure their ongoing career growth and development. Implement new ideas. Be an active member and leader within the Graycor Industrial Constructors, actively participating in committees, make recommendations for new initiatives, and embrace new policies related to Safety, Quality, Continuous Improvement Programs, and Lean Construction. To Be Successful in this Role, You Will Need: A minimum of seven (7) years of relevant heavy industrial construction operations experience within the steel and metal producing industries. A bachelor degree is preferred but not required. Strong leadership skills with the desire to succeed. Our best Project Managers are self-starters who drive excellence and meet high standards with the ability to inspire commitment, monitor performance, coach and develop people, negotiate positive outcomes, create a collaborative environment, reduce liability, solve problems and issues. Effective communication skills to motivate your team, delegate tasks, and present proposals to clients with competence and confidence. Ability to communicate with highly technical individuals. The fortitude to juggle competing priorities in a fast-paced environment. Multi-tasking with a sense of urgency while maintaining strong attention to detail and accuracy is crucial. Must be familiar with a “self-perform” project environment and be used to working in a unionized labor environment. Must be familiar with lump sum, competitive bid environment.

Feldkamp Mechanical, one of the leading mechanical contractors in the Ohio region specializing in commercial and industrial piping, HVAC and Refrigeration is seeking a Project Manager for our Cincinnati, Ohio office. This position is responsible for overall management direction for HVAC / Plumbing projects. Responsible for all phases of the construction project including but not limited to managing employees, subcontractors, owner relations, quality control, safety, schedule and executing to the project budget. Key Responsibilities: Plan, direct, and coordinate all activities for the projects assigned to ensure objectives are accomplished safely within prescribed funding and scheduling parameters. Monitor and control project(s) budget and schedule. Prepare and report project(s) costs, progress, and forecasts. Establish and execute project work plans. Maintain open communication channels with clients, permitting agents, or other stakeholders. Manage pay applications, Requests for Information, Purchase Orders, Submittals, Change Orders, Claims, Request for Proposals, Request for Qualifications, and any other required project related communication. Coordinate with Operations Manager and General Superintendent the allocation of shared resources such as personnel and equipment. Serve as company representative at required project meetings and prepare documentation, as necessary. Perform in depth review of all essential elements of projects assigned to identify challenges to mitigate or opportunities to realize. Supervise work performed to ensure it meets company standards and quality plan. Review drawings and specifications for constructability, completeness, and accuracy. Supervision of Project Coordinators and Foremen, as assigned. Promptly respond to project ad-hoc needs. Enforce safety policies and procedures. Ensure all on-site compliance with project procedures, safety program requirements, work rules and company policies. Apply expert level knowledge in commercial HVAC and plumbing, materials, equipment, and risk management. Regular attendance is required according to company policy to ensure crews can operate at a normal efficiency level. Performs other related duties as assigned. Required Skills/Abilities: Highly proficient in the HVAC and Plumbing industries. Excellent verbal and written communication skills. Proficient in Microsoft Office Suite, G-suite or related software. Thorough understanding of contracts, plans, specifications, and regulations. Ability to remain flexible and efficient in a fast-paced environment. Ability to make intelligent and quick decisions, working well under pressure, and when faced with unexpected occurrences or delays. Ability to effectively multitask while analyzing and solving problems. Thorough understanding of engineering, architectural, and other construction drawings. Proficient with software/internet-based programs such as Bluebeam and Procore. Education and Experience: College degree in construction management, civil engineering, or equivalent combination of work experience and technical training and/or extensive experience in construction, design, and management required. Minimum five (5) to ten (10) years of related Project Management experience and in managing construction projects required. Demonstrated ability to thoroughly understand drawings and specifications, general contractor & subcontractor documents, materials, means and methods. Valid Driver's License with a clear MVR. Project Management Professional (PMP) certification is a plus. OSHA 30 Ability to travel as necessary. WORK ENVIRONMENT AND EXPECTATIONS Some job duties are performed within an established office environment under normal lighting and climate-controlled tolerances. The noise level in the work environment is usually low to moderate. When the employee is at a work site, the employee is regularly exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places and outdoor weather conditions. The noise in the work environment is often loud. Requires a consistent physical presence at the branch office to oversee shared services functions and employees, normally achieved by working standard business hours. Certain positions will require flexibility of working hours to meet the demands of the job and the direction of the manager. The work environments are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. PHYSICAL REQUIREMENTS Prolonged periods of standing and walking. Requires lifting, positioning, pushing, and/or pulling. Frequently reaching, stooping, bending, kneeling, and crouching. Prolonged periods sitting at a desk and working on a computer. Must be able to lift at least 50 pounds at times. Why Join Us? We're committed to attracting talented individuals who seek a company with a strong foundation of success and an outstanding culture. We proactively provide competitive compensation, comprehensive benefits, and clear pathways for career advancement with autonomy and flexibility in an entrepreneurial environment. Learn more about us at ************************* We celebrate diversity and are committed to creating an inclusive environment for all employees. We do not discriminate in any aspect of employment on the basis of race, color, religion, national origin, ancestry, gender, sexual orientation, gender identity and/or expression, age, veteran status, disability, or any other characteristic protected by federal, state, or local employment discrimination laws where Kelso does business.

With concrete restoration at the core of its business, LRT has become a leader in the application of the latest technologies, materials, and installation methods for the repair and preservation of concrete and masonry. LRT was established in 1979 and has flourished in its ability to restore, protect, and preserve the structures its customers use to live, work, and play. As a leader in the industry, we achieve excellence with best-practiced individuals, integrity, and guided by our values of PEOPLE. HONOR, and GRIT. We are growing in the Cincinnati, OH area and have an opportunity for a Construction Project Manager to join our team. 3 years' experience with Structural Restoration, Concrete, and/or Waterproofing is highly preferred. LRT works on structures in many industries from simple repairs to multi-year restorations across different technical trades. Our projects provide value-added solutions to owners, engineers, and contractors. Your responsibilities in this role: 1. Financial -Responsible for the overall financial success of each project and the team. 2. Estimating -The Project Manager is primarily responsible for the pursuit, estimating, and bidding process for their teams. 3. Administrative -Responsibilities include but are not limited to change order management, customer-driven documentation and submittal processes, contract management, schedule documentation, and LRT administrative and management processes. 4. Business Development 5. Long-Term Horizon Project 6. Team Planning Skills: Communication abilities in both written and verbal forms are some of the most valuable Project Manager skills. In addition, proficiency in modern business and construction technological tools is highly desired. The ability to work well with and develop relationships with a wide range of people that can vary from field workers to engineers to executives with customers is very important. In addition, financial analysis, process management, leadership ability, and a mentality of continuous improvement are important skills/attributes of a successful Project Manager. What you need to qualify: · Minimum of 3+ experience in the construction industry. Experience strictly related to concrete and/or masonry restoration and specialties is highly desirable but not required. Prior experience in the roles of Project Engineer, Field Engineer, or Estimator in the industry would be desired. · Associate or Bachelor's Degree in Construction Management or Civil Engineering is highly desirable but not required. Alternate degrees or simply industry experience is sufficient depending upon the individual's skills and work experience. · Knowledge of construction, finance, and management with a thorough understanding of best corporate and industry practices. · Highly collaborative work style-work from office or job site location. LRT is proud to be an Equal Opportunity Employer and member of the Drug-Free Safety

Shift 1 (United States of America) Milacron is looking for an Automation Controls Engineer to join our team in Batavia, OH. In this role, you will be responsible for the development and testing of control system software for new product development. To be successful you will need to understand how control and machine interact to produce parts. It is helpful to have experience in robotic software development for machine logic and machine motion/server control. The Software Development Life Cycle (SDLC) includes implementation of new features on existing control platforms. This requires understanding and following the existing control architecture and associated style guides. Work You'll Do: To accomplish this, you will need to have experience in developing web-based frontend via Javascript, C# and HTML. This includes development on legacy system using Qt. The backend machine control is a PLC development environment. Team: You'll work with a global team of developers to gain not only an understanding of the software system but also how injection molding machines and plastic extrusion machines work for our customers. The team will be there to mentor you, identify training opportunities and guide you through your initial tasking. Basic Qualifications: Understanding of the machine logic using C, C++ for motion and process control. Successfully working with a team of developers that produces and maintains a product. Minimum of a Bachelor's engineering degree (Mechatronics' EE, CE, CM, or related major). Preferred Qualifications: 3-5 years of Software development experience with a focus on web development. Languages include C, C# and JavaScript. PLC development experience developing in C with PLC function blocks and/or structure text. Experience with developing motion control software and robotic automation. Experience with B&R Automation Studio and/or Beckhoff Twin CAT 3 a plus. Ability to read and interpret electrical and hydraulic prints. Who we are: Milacron is a global leader in the manufacture, distribution and service of highly engineered and customized systems within the $27 billion plastic technology and processing industry. We are the only global company with a full-line product portfolio that includes hot runner systems, injection molding, extrusion equipment. We maintain strong market positions across these products, as well as leading positions in process control systems, mold bases and components, maintenance, repair and operating (“MRO”) supplies for plastic processing equipment. Our strategy is to deliver highly customized equipment, components and service to our customers throughout the lifecycle of their plastic processing technology systems. EEO: The policy of Milacron is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual's age, race, color, sex, religion, national origin, disability, sexual orientation, gender identity/expression or veteran status. We are committed to being an Equal Employment Opportunity (EEO) Employer and offer opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email us at recruitingaccommodations@milacron.com. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.

Click on "Learn more about this agency" button below to view Eligibilities being considered and other IMPORTANT information. The primary purpose of this position is to serve as a professional aerospace engineer in support of the acquisition, development, or sustainment of weapon systems, subsystems, and/or support equipment. Summary Click on "Learn more about this agency" button below to view Eligibilities being considered and other IMPORTANT information. The primary purpose of this position is to serve as a professional aerospace engineer in support of the acquisition, development, or sustainment of weapon systems, subsystems, and/or support equipment. Overview Help Accepting applications Open & closing dates 11/04/2025 to 03/04/2026 Salary $88,621 to - $155,164 per year Salary rates by location can be found here, ***************************************************************************************** Pay scale & grade NH 3 Locations Few vacancies in the following locations: Eglin AFB, FL Hanscom AFB, MA Wright-Patterson AFB, OH Fort Worth, TX Show morefewer locations (1) Arlington, VA Remote job No Telework eligible No Travel Required Occasional travel - You may be expected to travel for this position. Relocation expenses reimbursed No Appointment type Permanent Work schedule Full-time Service Competitive Promotion potential None Job family (Series) * 0861 Aerospace Engineering Supervisory status No Security clearance Other Drug test No Financial disclosure No Bargaining unit status No Announcement number AFMC-086103-12829080-KDB Control number 849493600 This job is open to Help The public U.S. Citizens, Nationals or those who owe allegiance to the U.S. Duties Help * Performs professional aerospace engineering work involved in the application of advanced theories, concepts, principles, and processes to the acquisition, development, or sustainment of weapon systems, subsystems, and/or support equipment. * Functions as the organization's technical specialist in design and development engineering for critical systems and subsystems. * Performs complex and comprehensive analysis and uses systematic, disciplined, quantifiable approaches to implement, develop, and document projects. * Serves as a consultant and technical specialist to senior subject matter experts, agency, and /or DoD officials responsible for broad program operations. Requirements Help Conditions of employment * U.S. Citizenship is required * Males must be registered for Selective Service, see *********** * The position is subject to provisions of the DoD Priority Placement Program * Disclosure of Political Appointments * For more information on Acq Demo please go to DoD AcqDemo Homepage *********************** and Fact Sheet ***********************faq.html * Relocation costs or other incentives may be available and considered by the organization. * Work may occasionally require travel away from the normal duty station on military or commercial aircraft. * This position may require drug testing and the candidate may be subject to passing a drug test upon selection. * Selectee is expected to be granted with and/or maintain the appropriate security clearance required for the position. * Selectee may be required to serve a probationary period. * Employee may be required to work overtime. * The employee must meet the Defense Acquisition Workforce Improvement Act (DAWIA) requirements applicable to the duties of the position. * All federal employees are required to have direct deposit. * This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur. * The employee must meet the continuing acquisition education requirements IAW DoDI 5000.66 paragraph E2.2.8. * This is an acquisition coded position. Selectee must complete required certification level 2 in Engineering and Technical Management. Qualifications Experience requirements are described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions, Professional and Scientific Positions. BASIC REQUIREMENT OR INDIVIDUAL OCCUPATIONAL REQUIREMENT: A Bachelor's degree (or higher degree) in Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. Click here to view occupational requirements for this position. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: SPECIALIZED EXPERIENCE: Applicants must have at least 1 year (52 weeks) of specialized experience at the next lower broadband NH-02, equivalent to the next lower grade GS-11 or equivalent in other pay systems. Specialized experience includes applying working knowledge of scientific and/or engineering methods of research and investigation to solve complex scientific, engineering, and/or developmental problems related to aerospace engineering. NOTE: Due to the use of 120-day rosters, this period of experience may be completed within 120 days of the closing date of this announcement. This announcement establishes a pool of candidates to fill future positions. We accept applications continuously during the open period of this announcement. We review applications and refer candidates for selection consideration as vacancies occur within the organization. Additional vacancies may be filled from this announcement upon its closing for up to 120 days. KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: * Knowledge of professional aerospace engineering concepts, principles, practices, standards, methods, techniques, materials, and equipment to effectively apply advanced engineering theories, principles, and concepts to project development, execution, and advisory services. * Knowledge of development testing and evaluation sufficient to apply experimental theories and new applications to issues and provide technical advice and direction in support of weapon systems, subsystems, and/or support equipment. * Knowledge of integrated air-vehicles, ground systems, and support equipment sufficient to plan, design, test, troubleshoot, evaluate, and oversee the development and/or sustainment of aerospace vehicles, systems, equipment, and components. * Knowledge of other engineering disciplines and standard acquisition regulations, practices, and procedures. * Ability to devise and evaluate criteria, parameters, characteristics, and interrelationships for design approaches, and to assess the impact of new technology on current systems and processes. * Ability to communicate clearly, concisely, and with technical accuracy, both orally and in writing, as well as work in a professional manner with peers, management, contractors, academia, and other agencies. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment.You will receive credit for all qualifying experience, including volunteer experience. Education ARE YOU USING YOUR EDUCATION TO QUALIFY? If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcriptswith the application. Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience; transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click here to check accreditation. FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying. Additional information This is an acquisition demonstration project position NH-03 equivalent to a GS-12 to GS-13. Interagency Career Transition Assistance Program (ICTAP): For information on

Job DescriptionSalary: tek Worx is the leading supplier of energy optimization solutions for chiller and boiler systems in industrial, institutional and commercial sites. Our growth and success has opened the opportunity for multiple Application Engineers to function as the lead technical representatives for these large scale HVAC projects. Responsibilities: Pre-sale data collection and site assessment including mechanical/operational and control system audits Develop project implementation plan and budget Field startup/commissioning to ensure system compliance with specifications Client field training on system operation, maintenance and troubleshooting Coordinate post-installation performance measurement/verification and support Qualifications: Experience in one of the following: Industrial and/or commercial HVAC: central plants, mechanical systems, or Mechanical/HVAC equipment: chillers, boilers, pumps, cooling towers, valves, or Control systems: building automation, PLC, instruments, VFDs, or related areas B.S. in Engineering or Associate degree in mechanical or electrical/electronic technology with 2 years related experience Ability to communicate technical material to a non-technical audience Strong interpersonal skills; able to work comfortably with customers, system integration partners and sub-customers Able to travel domestically up to 20% of the time (M-F only) tek Worx Culture & Benefits Opportunities for personal and professional growth Competitive salary and profit sharing Health insurance Employer-funded HSA account Education reimbursement 401(k) match Self-managed vacation policy Emphasis on work/life balance Open and cooperative work environment Ifyou are a self-motivated, collaborative and goal oriented individual seeking a position that guarantees a direct business impact, we encourage you to submit your resume. Please note, a drug/alcohol screen, background check and psychological profile examination are required for any successful candidates. Must be a US citizen or Green Card holder.

Skanska is searching for a dynamic Project Engineering Intern. This is a great opportunity to start a career with a company that builds things that matter and values its team. We are proud to share our culture of diversity and inclusion. Our work makes a clear contribution to society and the environment around us. We build in many different verticals. (******************************************************** Whether we are building schools to provide inspiring spaces for learning, roads to connect communities, or hospitals to care for patients, it all contributes to our purpose - we build for a better society. Skanska's values -Be Better Together, Act Ethically and Transparently, Commit to Customer, and Care for Life-are deeply ingrained in how we work, which is why our values support and drive our D&I efforts. Project Engineering Intern positions include Engineering, Field Engineering (mechanical or civil), Cost Engineering, Safety Engineering, Estimating, Finance/Accounting, and Equipment/Maintenance. The Project Engineer Intern assists and supports the Project Manager and the Superintendent on assigned projects. The position works under direct supervision with mentorship, performs routine daily activities, and gathers and distributes information. During an internship with Skanska, you may have the opportunity to gain experience with coordinating project activities with direct supervision from the Project and/or Operations Manager, performing accounting activities with assistance, performing estimating functions as requested with assistance, and other duties as assigned. **Project Engineering Intern Required Qualifications:** + Knowledge of basic phases of construction projects; + Knowledge of mathematics functions (geometry, basic algebra); + Computer skills (MS Office, HCSS, CGC, etc); + Ability to perform all work in a timely, professional, and efficient manner while effectively communicating and interacting with customers, clients, subcontractors, and other third parties; + Ability to present information in a clear and understandable manner in both written and verbal form; + Working towards a bachelor's in Construction Management, Engineering, Mechanical Engineering, Civil Engineering, or related field, or equivalent through experience **Salary Range - Hourly Pay Ranges: $20/hr to $23/hr** **Our** Investment (************************************************ **in our full-time, permanent team members:** + We believe that Benefits (********************************************************************** should connect you to the support you need when it matters most, and should help you care for those who matter most. That's why we provide an array of options (including medical, dental, and vision insurance plans), expert guidance, and always-on tools that are personalized to meet the needs of your reality - to help support you physically, financially, and emotionally through the big milestones and in your everyday life. Please visit the Compensation and Benefits (********************************************************************** summary on our careers site for more details. + As a Skanska community, our values ground us, and our diversity of experience propels us forward. No matter what your career stage, there's a place for you to thrive here and partner with us in shaping how our world lives, moves, and connects. + At Skanska, we Care for Life. And we're committed to supporting your whole health and peace of mind through inclusive and personalized total rewards. + We're committed to your success by developing you in your role and supporting your career growth + Compensation and financial well-being (********************************************************************** - Competitive base salary, excellent bonus program, 401k, & Employee ownership program. **Come work with us and join a winning team!** **Background Check Required** Skanska is an Equal Employment Opportunity (EEO) Employer. We do not discriminate on the basis of race, color, religion, sex, national origin, disability, age, genetic information, citizenship, protected veteran status, or any other categories protected under applicable federal, state, and local laws. Skanska Equal Employment Opportunity Skanska uses knowledge & foresight to shape the way people live, work, and connect. More than 135 years in the making, we're one of the world's largest construction and project development companies. With operations in select markets throughout the Nordics, Europe and the United States, global revenue totaled $15.9 billion in 2024. Skanska in the U.S. operates 28 offices across the country, with its headquarters in New York City. In 2024, the U.S. construction sector generated $8.2 billion in revenue, and the U.S. development sector's net investments in commercial projects totaled $224 million. Together with our customers and the collective expertise of our 6,300 teammates in the U.S. and 26,300 globally, we create innovative and sustainable solutions that support healthy living beyond our lifetime. Skanska's Applicant Privacy Policy for California Residents (****************************************************************************************************************** **Search Firm and Employment Agency Disclaimer** _Search Firm and Employment Agency Disclaimer Skanska USA Human Resources ("Skanska HR") provides HR services to the Skanska business units within the U.S.A. including Skanska USA Civil Inc., Skanska USA Building Inc., Skanska USA Commercial Development Inc. and Skanska Infrastructure Development Inc. (collectively "Skanska USA"). As such, Skanska HR is the sole authorized representative of Skanska USA to execute any agreements with search firms, employment agencies or any employment vendor ("Vendor"). As a condition precedent to any entitlement for payment, a Vendor shall have both (1) Skanska USA Placement Agreement, and (2) an Engagement Job Order executed by an authorized Skanska HR representative. Absent the properly executed documents, Skanska HR shall have no obligation to make payment to the Vendor. Verbal or written communications from any employee of Skanska USA business units shall not be considered binding obligations. All resumes whether unsolicited or solicited shall be considered property of Skanska HR._

The Aerospace Engineer will work with the Installation Aerodynamics team to perform aerodynamic design and optimization of inlets, nacelles, and exhaust systems, as well as related aerodynamic components. In this role you will coordinate with internal and external stakeholders including airframers, global partners, leadership staff, and the broader installation aero team to provide aerodynamic performance assessments of aerodynamic engine components and commercial aviation propulsion systems. Essential Responsibilities As the Aerospace Engineer, you will: * Execute, with guidance from senior engineering resources, aerodynamic analysis, design, test, and integration functions required to define and support assigned components, assemblies, and systems that meet business standards and program / product requirements * Prepare and present technical information to internal and external customers * Perform computational fluid dynamics (CFD) analysis including geometry modification & meshing * Use, develop, and test in-house engineering tools to perform aerodynamic evaluations * Set up and execute test programs achieving test objectives within schedule and budget guidelines * Document and communicate aero design, analysis, and test data results * Share engineering information, lessons learned, and promote open dialogue * Assure proper documentation of technical data generated for the assigned projects and/or tasks consistent with engineering policies and procedures Qualifications/Requirements * Bachelor of Science degree from an accredited university or college in Mechanical Engineering, Aerospace Engineering, or related discipline with a minimum of 2 years of relevant experience * Master of Science degree from an accredited university or college in Mechanical Engineering, Aerospace Engineering, or related discipline * Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening. Desired Characteristics * Experience in engine, nacelle, or aircraft aerodynamic design, CFD, or test support * Demonstrated passion for the aviation industry * Highly motivated and passionate with excellent communication skills * Proven teaming and collaboration capability This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

The Commissioning Engineer is a deployable member of the Engineering team responsible for system commissioning, acceptance testing, and end-user knowledge transfer. This role ensures that integrated AV, UC, and IT systems are tested, validated, and fully functional prior to project turnover. The Commissioning Engineer servs as an on-site technical leader and works closely with installation, project management, programming, and engineering teams to deliver systems that meet Pixel integration standards and project specifications. ROLES AND RESPONSIBILITIES: · Conduct pre-deployment system testing and validation, in-office, prior to installation. · Perform on-site commissioning and acceptance testing prior during final system verification. · Provide direction and technical leadership to installation personnel while on-site to ensure proper system functionality and adherence to company standards. · Conduct knowledge transfer sessions with client stakeholders and end users following acceptance testing. · Test and verify control system functionality and collaborate with programmers to debug and optimize performance. · Make minor control system and/or GUI modifications when necessary to align with project documentation and system performance goals. · Configure and tune DSP systems. · Perform network configuration to support AV-over-IP solutions. · Configure, test, and optimize digital video signal chains. · Deploy and configure unified communications systems (Microsoft Teams Rooms, Zoom Rooms, and Cisco Webex). · Validate and troubleshoot USB signal extension, connection, and operations. · Document commissioning and acceptance testing results and provide detailed feedback to engineering and programming teams. · Maintain professionalism and represent the company positively during client-facing engagements. SUCCESS FACTORS: · Ability to Travel Nationwide · A high level of customer centricity · Strong team player with the ability to adapt to diverse team members · Ability to perform in a fast paced/high volume environment · Excellent verbal and written communication skills · Exceptional Critical Thinking skills · Detail Oriented- a high level of attention to detail is required · A high level of time management, accountability, and prioritization skills · Self-motivated, goal-oriented, and driven to accomplish department goals · Ability to be organized, problem solve, and be solution oriented · Proficient in Microsoft Office (Word, Excel, Outlook, Power Point) WORK ENVIRONMENT: · Must be able to work in a variety of physical positions, including climbing, sitting, standing, walking, and driving · When working on site, could be required to wear common protection of safety equipment, such as safety glasses, gloves, hearing protection and hard hats EXPERIENCE AND EDUCATION: · 3-5 years of experience in AV integration, service, or commissioning. *Programming or Engineering experience is a plus* · Hands-on experience with Crestron, Q-SYS, or Extron control systems · Hand-on experience with Q-SYS, Biamp, or Shure DSP platform configuration and tuning · Demonstrated understanding of AV-over-IP and network-based media transport technologies and protocols · Real world experience configuring and deploying UC ecosystems such as Microsoft Teams, Zoom, and Webex · Strong troubleshooting and system-level problem-solving skills · CTS certification, or ability to quickly obtain Pixel Technologies is an equal opportunity employer. All candidates agree to complete a selection assessment and pre-employment drug screen.

The Project Coordinator supports the Project Management team in initiating, tracking, and overseeing all aspects of construction projects. This includes managing schedules, budgets, material procurement and delivery, engineering, manufacturing, and installation to ensure projects are completed on time and to quality standards. Responsibilities also include performing material take-offs to estimate costs for labor, materials, and equipment and compiling submittal packages. Key Responsibilities Budget Management Assist the Project Management team with monthly re-estimates and variance corrections related to labor, materials, and equipment costs. Track and document change orders and claims, ensuring timely submission. Support accurate and timely job billing. Project Documentation Prepare essential project documents including Means & Methods, submittals, change proposals, pay requests, correspondence, transmittals, and reports. Estimating Conduct material take-offs and estimate associated costs for labor, materials, and equipment. Project Execution Understand project scope and requirements to effectively support the Project Manager. Collect necessary information for submittal packages. Coordinate the issuance of equipment and building permits to meet project deadlines. Onsite presents during the installation phase of the project. Scheduling Recommend cost-effective strategies to meet project goals. Assist in managing vendor schedules and scopes within project timelines. Qualifications Bachelor's degree in Construction Management or a related field preferred. 0- 2 years' experience in construction project management. Experience with custom curtain wall systems, unitized wall systems, structural glass wall systems, or architectural metal panels is highly desirable. Strong verbal and written communication skills. Ability to perform under pressure and adapt to changing priorities. Valid driver's license and safe driving record. Must carry insurance as outlined in the Company Driver Policy. Proficient in Microsoft Office Suite. Experience with MS Project or similar project management software preferred. Travel required based on project needs.

Are you ready to see your future take flight? At GE Aerospace, we believe the world works better when it flies. We are a world-leading provider of jet engines, components, and integrated systems for commercial and military aircraft. We have a relentless dedication to the future of safe and more sustainable flight and believe in our talented people to make it happen. Job Description Job Summary: Help invent the future of flight, lift people up, and bring them home safely as a GE Aerospace intern or co-op! You'll build professional and technical skills in an aerospace systems & defense role working on challenging, real-world problems to design aerospace systems for commercial and military applications & support through service life. Build relationships with interns/coops and leaders and prepare for a potential full-time position after graduation in one of our fantastic leadership programs or a direct hire opportunity. You will gain broad exposure to the engineering field with an array of opportunities ranging from design & analysis to working hands-on with aerospace systems. Ultimately, you'll be placed taking your preferences into account while also considering your major, year of schooling, and business needs at the time of placement. Essential Responsibilities: An Aerospace Systems & Defense intern/co-op may experience work in the development of engine controls, navigation, & guidance systems; gas turbine engine components; electrical power systems; mechanical systems; vehicle health & data management systems; mission systems; computing systems; and platform systems integration. Responsibilities may include design, analysis, development, and testing, writing software requirements, software testing, simulation, tool development and product/program support. Qualifications/Requirements: * Minimum 3.0 cumulative GPA off a 4.0 scale without rounding. * Attending a full time matriculated and nationally accredited baccalaureate or graduate program in engineering (degrees accepted: Mechanical Engineering, Aeronautical/Aerospace Engineering). * Willingness and ability to work in the United States; primary locations are: Dayton, OH. * Reliable transportation, many of our sites do not have public transportation available. Eligibility Requirements: Any offer of employment is conditioned upon the successful completion of a background investigation and drug screen. Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening. Desired Characteristics: * A solid commitment to a career in technology and a passion for engineering * Humble: respectful, receptive, agile, eager to learn * Transparent: shares critical information, speaks with honesty, contributes constructively * Focused: quick learner, strategically prioritizes work, committed, and takes initiative * Leadership ability: strong communicator, decision-maker, and collaborative teamwork * Problem solver: analytical-minded, challenge existing processes, critical thinker * Strong knowledge of computer and Microsoft products * Proficiency in at least one programming language Benefits: Pay rates for this position begin at $20/hour and increase for each undergraduate year completed. Relocation support and housing assistance is available for those who relocate to a new city. Equal Opportunity Employer: GE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes