Quality control analyst jobs in Little Rock, AR - 26 jobs

Southwest Power Pool (SPP) is about more than power. We're about the power of relationships. Our employees have the opportunity to work together to ensure electricity is delivered reliably and affordably to the millions of people living in our service territory. We have been voted one of Arkansas' Best Places to work by Arkansas Business and we are looking for a member of our team who is passionate about our mission to keep the lights on! We have a core ideology here at SPP that we stand by: Do the right thing, for the right reason, in the right way. We believe in supporting our employees through a fantastic benefits package: Competitive and transparent pay with bonus opportunities Excellent insurance package including three great medical plans to choose from, employer-paid short-term disability, long-term disability, and life insurance Relocation bonus (if applicable) Hybrid working environment for positions that are eligible Fantastic contributions to your retirement through a 401(k) savings plan with employer-match benefits and a pension (defined benefit plan) fully funded by SPP PLEASE NOTE: SPP is not able to sponsor employment visas or student-work authorizations (STEM OPT) for this position. Please ensure you are eligible to work in the U.S. without sponsorship prior to applying. COMPENSATION INFORMATION The salary range(s) represents our good faith estimate for the role at this time. While we strive to provide competitive and transparent compensation, there may be circumstances where an offer is above or outside of the listed range. We are open to discussing salary expectations with qualified candidates considering factors such as the candidate's qualifications, skills, competencies, experience and geographic location will all be considered during the hiring process. Quality Control Specialist I | Pay Range: $57,200.00 - $70,060.00 Join our IT Quality Control team as a Quality Control Specialist! Turn your analytical skills into meaningful impact. Southwest Power Pool is seeking a Quality Control Specialist I to support the development, evaluation, and implementation of processes that strengthen our security and compliance framework. If you enjoy working with data, writing clear documentation, and collaborating across technical teams, this role is a great fit. What You'll Do Document and improve IT security processes Analyze evidence and datasets for security and compliance Support audits under NERC CIP and SOC1 standards Create reports and dashboards that highlight risks and trends Partner with Cyber Security, IT, and Compliance teams to drive improvements Why Join Us? You'll be part of a collaborative team dedicated to accuracy, clarity, security, and continuous improvement. This role offers an excellent opportunity to build experience in IT controls, cybersecurity compliance, audit support, and technical documentation-while directly contributing to the protection of SPP's systems and operations. Ready to make an impact? Apply today and help strengthen SPP's security and compliance controls. To be successful as an Quality Control Specialist I, we're looking for: Education Requirements: Bachelor degree in computer science, business administration, or related IT field, or equivalent technical work experience may be considered in lieu of degree requirement Experience Requirements: Introductory knowledge/experience in IT, IT control methodologies, and/or IT technical writing Experience with Microsoft Office; additional experience with ServiceNow, Jira, Confluence, SQL, or Python is a plus Competent in both written and oral communication Logical and efficient with attention to detail Demonstrated ability to provide flexible prioritization and organizational skills Competent understanding of industry compliance requirements and the IT controls that support these requirements Competent understanding of, compliance with, and enforcement of SPP Policies and Procedures Preferred: Experience with IT domains such as networking, firewalls, asset management, access management, etc. Experience with security controls (e.g. NIST Cybersecurity Framework) Experience with IT technical writing Experience with test planning and test execution coordination Experience with data analysis tools (e.g. SQL, Excel, Tableau, Python) Experience with Governance, Risk and Compliance (GRC) tools/platforms Work Environment: This job operates in a professional office environment. This role routinely uses standard office equipment. Physical Demands: The physical and mental demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully. While performing the duties of this job, the employee is regularly required to make decisions, interpret data, and problem solve. The employee frequently is required to stand or sit for extended periods; use hands to operate a computer keyboard and standard office equipment. The employee must occasionally lift and move up to 10 pounds. Requires the ability to work and collaborate with managers and employees at all levels to exchange ideas, information, and opinions to facilitate the task. Specific vision abilities required by this job include close vision, distance vision, color vision, and ability to adjust focus. Understanding of compliance with and enforcement of SPP Policies and Procedures Position Type, Location, and Expected Hours of Work: This is a full-time, hybrid onsite role located in Little Rock, Arkansas. The standard work schedule is Monday through Friday, 8:00 a.m. to 5:00 p.m., with occasional extended hours as business needs arise. Travel Requirement: This position requires minimal travel (approximately 10%). SPP is an Affirmative Action and Equal Opportunity Employer of individuals with disabilities and protected veterans and is committed to excellence. If you need a reasonable accommodation for any part of the employment process, please contact us at ********** and let us know the nature of your request. We will only respond to messages left that involve a request for a reasonable accommodation in the application process. We will accommodate the needs of any qualified candidate who requests a reasonable accommodation under the Americans with Disabilities Act (ADA). At SPP we believe in a culture of belonging. Learn more here: Culture of Belonging - Southwest Power Pool. Full job descriptions will be made available to those selected for an interview.

Job ID 251330 Posted 16-Jan-2026 Service line PJM Segment Role type Full-time Areas of Interest Building Surveying/Consultancy, Construction, Consulting **About the role** The Facility Condition Assessments (FCA) Team at CBRE | Turner & Townsend Inc. is currently seeking a detail-oriented individual who will ensure that the deliverables are accurate, consistent, and conform to the standards and guidelines for the facility condition assessments, capital planning, and asset management reports established by the Building Consultancy group. Primary duties include identifying content issues, developing and enforcing quality standards, and collaborating with teams to provide various client deliverables in a timely manner. **What you'll do** + Data Assessment: Review facility condition and asset data for content, structure, and quality, and identify anomalies and inconsistencies. Must have fluency of the English language, as it relates to grammar, punctuation, and spelling. Must be able to compare data criteria/fields for content, agreement, and technical accuracy. + Standards Adherence: Collaborate with team members to ensure that the comprehensive quality standards and metrics (e.g., accuracy, completeness, timeliness) are met. Must be able to switch between sets of rules pertaining to each client and project. + Data Cleansing and Resolution: Identify and rectify errors, inconsistencies, and redundancies within facility condition assessment and asset datasets. + Monitoring and Reporting: Evaluate and provide corrective action of data quality, create reports for facility capital planning engagements. + Process Improvement: Recommend changes to existing processes, entry, and deliverable workflow. Must be a team player and not afraid to ask questions. Must be comfortable in a fast-paced, high-volume setting and managing projects and deadlines. **What you'll need** + We will provide reasonable accommodations that may be made to enable individuals with disabilities. To perform this job optimally, an individual must be able to perform each crucial duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. + Associate's degree (AA/AS), College Diploma, or equivalent preferred. Minimum of three years of related experience in addition to education. Consideration will be given to a person with 5 years of related experience, regardless of whether they hold a degree. Experience in the Architecture, Engineering, and Construction field is preferred. + Experience with Microsoft Office Suite products. + Applicants must be currently authorized to work in the United States without the need for visa sponsorship now or in the future. **Additional Skills** + Ability to write in a clear and concise, coherent way using appropriate grammar, spelling, punctuation, and style. Adapt writing style for different audiences, purposes, and formats. + Ability to edit technical documents in a detailed and accurate manner to ensure deliverables are professional and presentable. + Ability to comprehend and interpret instructions, short correspondence, and memos and ask clarifying questions to ensure understanding. Must be detail-oriented and observant + Requires basic knowledge of financial terms and principles. Ability to calculate simple figures such as percentages. + Must have a basic understanding of architectural, mechanical, and electrical equipment and features, and some familiarity with industry standards and language. **Disclaimer:** _Please be advised that effective January 1, 2025, CBRE Project Management and Turner & Townsend will be consolidated into a single global business entity. As a candidate applying for a position, you should be aware that while your initial employment may be with CBRE Project Management, you will subsequently transfer to the newly formed entity that encompasses both organizations._ Turner & Townsend carefully considers multiple factors to determine compensation, including a candidate's education, training, and experience. The minimum salary for this position is $50,000 annually and the maximum salary for this position is $70,000 annually. The compensation that is offered to a successful candidate will depend on the candidate's skills, qualifications, and experience. Successful candidates will also be eligible for a discretionary bonus based on Turner & Townsend's applicable benefit program. This role will provide the following benefits: 401(K), Dental insurance, Health insurance, Life insurance, and Vision insurance. **Equal Employment Opportunity:** CBRE has a long-standing commitment to providing equal employment opportunity to all qualified applicants regardless of race, color, religion, national origin, sex, sexual orientation, gender identity, pregnancy, age, citizenship, marital status, disability, veteran status, political belief, or any other basis protected by applicable law. **Candidate Accommodations:** CBRE values the differences of all current and prospective employees and recognizes how every employee contributes to our company's success. CBRE provides reasonable accommodations in job application procedures for individuals with disabilities. If you require assistance due to a disability in the application or recruitment process, please submit a request via email at recruitingaccommodations@cbre.com or via telephone at *************** (U.S.) and *************** (Canada). CBRE, Inc. is an Equal Opportunity and Affirmative Action Employer (Women/Minorities/Persons with Disabilities/US Veterans)

Job DescriptionSalary: About Us: Obsidian Achernar Mauritius (currently trading as One Africa Markets) is a fast-growing business in the finance sector, committed to maintaining the highest standards of financial management and regulatory adherence. We pride ourselves on fostering a culture of integrity, transparency, and ethical conduct. As we continue to expand our operations in Mauritius, we are seeking a talented and experienced Internal Control Officer to join our team. This role is integral to maintaining the financial health and integrity of our operations. Job Purpose: The Internal Control Officer will work with the Internal Control Manager to develop, implement, and continuously improve the company's internal control framework. This role focuses on enhancing the effectiveness of risk management, internal controls, and governance processes while ensuring compliance with regulatory requirements and driving operational efficiency. Responsibilities Work with stakeholders to design, implement, and enhance the companys internal control framework to ensure robust risk management and compliance. Oversee the documentation, testing, and evaluation of internal controls across various functions, reporting to the internal control manager. Ensure ongoing monitoring and continuous improvement of internal controls across the organization. Conduct periodic risk assessments to identify key financial, operational, and compliance risks and report findings to the internal control manager and stakeholders. Lead risk mitigation initiatives and develop action plans in collaboration with relevant departments. Collaborate with cross-functional teams to identify opportunities for process improvement and control enhancements. Recommend best practices and provide strategic direction to improve efficiency and reduce risk. Assist in designing new processes, policies, and procedures to mitigate operational risks and strengthen internal controls. Support internal and external audit engagements by providing necessary documentation, control evidence, and explanations. Act as a liaison between the company and external auditors to ensure a smooth audit process and address identified issues. Coordinate corrective action plans for audit findings and ensure timely resolution. Prepare regular reports on the status of internal controls, risks, and compliance. Present findings, recommendations, and updates on control activities to executives and other stakeholders. Ensure clear and effective communication regarding control improvements, risk management, and compliance across the business. Ensure access rights align with job responsibilities and are periodically reviewed to prevent unauthorized usage. Collaborate with IT and cybersecurity teams to implement robust security measures, monitor access logs, and address potential breaches promptly. Develop and deliver training programs to enhance awareness of internal controls, compliance standards, and risk management practices within the organization. Promote the adoption of best practices and ensure that employees understand their role in maintaining effective internal controls. Key Qualifications Bachelors degree in Finance, Accounting, Law, Business Administration, or a related field. Minimum of 3 years of experience in internal controls, risk management, or compliance in the finance sector. Familiar with designing and enhancing internal control frameworks and risk mitigation. Strong leadership skills and ability to communicate effectively with stakeholders. Experience coordinating with auditors and resolving findings efficiently. Skills in managing access controls and cybersecurity measures. Ability to conduct risk assessments and recommend process improvements. Awareness of financial regulatory standards and frameworks. Integrity, professionalism, and attention to detail. Strong analytical, problem-solving, and decision-making abilities. Ability to work effectively in a fast-paced, dynamic environment.

JobID: 8801 JobSchedule: Full time JobShift: Day : As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America Job Summary Basic Job FunctionsPosition is required to assist in the inspection, acceptance, and/or rejection of work performed in a particular discipline in compliance with applicable codes and/or specifications as dictated by quality programs and/or contract documents and specifications.Structural Inspection:Experience level must fall within the erection of structural steel. Must be able to work in elevated areas. Must have knowledge of AISC, AWS D1.1, and AWS D1.6 Codes. Must have knowledge of bolt?up inspection including bolt lot verifications using Skidmore?Wilhelm. Additionally, must have knowledge of architectural, insulation and lagging, grout and concrete placement, Epoxy anchor installation inspection. Must have CWI (Certified Welding Inspector) certification.Electrical and Instrumentation Inspection:Experience must fall in the installation of electrical and instrumentation components, including interconnecting wiring, cables, and tubing. Must be knowledgeable of ICEA, IEEE, ISA, NEC, NEMA, NESC, and NFPA Codes and standards.Mechanical Inspection:Experience level must fall in the setting and alignment of static and rotating equipment, equipment skids, coolers, tanks, and interconnecting process piping fabrication and installation. Must be able to use measuring tools such as micrometers, calipers, transits, etc. and be able to set up dial indicators and laser alignment devices.Piping Inspection:Experience level must fall in pipe installation inspection, including welding, supports, instrumentation, etc. Must have CWI (Certified Welding Inspector) certification. Key Responsibilities 1. Assists material handling personnel with required material storage and PM requirements as needed. 2. Communicates with others regarding inspections results and recommends corrective procedures. 3. Participates in activities to support the company's strategic planning efforts. 4. Participates in the preparation of Quality control ITP. 5. Performs control measuring and tests equipment. 6. Verifies the installation of the systems, components and equipment in accordance with the assigned discipline. Minimum Job Requirements 1. 1+ year construction practices 2. 1+ year in quality control inspection discipline 3. HS Degree Required 4. Proficient use of all Microsoft Office Suite programs Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefit list: Market Competitive Salary (paid weekly) Bonus Eligibility based on company, group, and individual performance Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting Your First Day Flexible Time Off (FTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program #LI-KW1

Phasellus sit amet erat. Nulla tempus. Vivamus in felis eu sapien cursus vestibulum. Proin eu mi. Nulla ac enim. In tempor, turpis nec euismod scelerisque, quam turpis adipiscing lorem, vitae mattis nibh ligula nec sem. Duis aliquam convallis nunc.

About the Company: We provide specialized subcontracting and technical assistance services to support clients in the transport and aerospace industries. We work closely with clients to ensure that our solutions meet their needs and exceed their expectations. Our team members are motivated individuals that do remarkable things every day! Position Summary: AAA, United States, Inc. has partnered with a company in Little Rock, Arkansas that shapes the future by designing and building military aircraft, business jets and space systems. We are looking for experienced Quality Control A Inspectors who are seeking their next opportunity in a complex and ever-changing work environment! The Quality Control A Inspector performs in-process and final inspections of aircraft systems and components to determine the conformity of the aircraft to approved data and airworthiness. Perform installation inspections of components, structures, wiring and other aircraft associated items for conformity to engineering and other approved data. Essential Functions: Perform complete major inspection of aircraft, components, major assemblies, sub- assemblies, production tools or parts during manufacturing, modifications, installation, service, overhaul or flight to determine airworthiness, safety or conformance to approved data and Company standards and requirements. Apply technical knowledge in the fields of mechanics, hydraulics, electricity, sheet metal, rigging, instruments, test flights, etc. to determine and sign off safety, airworthiness, or conformance. Perform conformity inspection of components, major assemblies, sub-assemblies, or parts during manufacturing, modifications, installations to determine safety or conformance to standards and requirements. Interpret and check prints, both hard copy and electronic, engineering change orders and governmental regulatory procedures and specifications. Determine extent of work to be performed where no specifications, regulations or written standards are available. Use precision measuring guides, gauges and laboratory instruments. Is familiar with FAR Part 145, 135, 91, 65 and 21 and related A/C's Is familiar with FWW processes. Prepare necessary aircraft related FAA, customer or company documents. Complete and maintain reports and records as required. Accurately enter electronic data related to aircraft production, completion and installation operations. Suggest dispositions of damaged or worn parts and the possibility of salvage based on FAA/EASA regulations, company practices or procedures. Work in a safe manner in accordance with OSHA and company safety procedures. Perform all other duties as assigned as assigned Requirements High school diploma or equivalent. Airframe certificate Minimum of 5 years experience in maintenance of aircraft Experience with FAR 145 Repair Station and FAR 43 Maintenance. Able to read and understand structural and avionic drawings, schematics, test procedures, etc. Good verbal and written communication skills to prepare detailed reports. Computer literacy Able to walk up and down steps with or without reasonable accommodation Able to walk long distances, climb, stand, and kneel for extended periods of time with or without reasonable accommodation Pass vision testing, minimum 20/20 corrected, and with no limitations in color perception. Able to access confined areas. Working knowledge of Federal Aviation Regulations', Type Certificate Data Sheet, Airworthiness Directives', Advisory Circulars, etc. Able to work in a high noise environment (jet engines, air tools, etc.) with or without reasonable accommodation

The Quality Assurance Inspector monitors, records and verifies key production quality indicators and Process Critical Control Points for incoming raw materials and all production operations. Essential Job Functions Monitors inbound raw bulk material for proper truck seals, bin placement to assure proper rotation / and storage requirements, and appropriate Certificates of Analysis to match actual inbound ingredients Verifies food safety plan HACCP to assure compliance and makes proper notifications if the process does not conform to specifications. Specifically checks the following: Metal detector verifications every hour +/- 15 minutes Bar Code validator verifications every two (2) hours +/- 15 minutes Internal product cook temperature every hour +/- 15 minutes Package seals and container seals verified hourly +/- 15 minutes Batter temperature verified hourly +/- 15 minutes PES (Product evaluation system) review hourly +/- 15 minutes Verifies code dates on all packages as required Monitors quality attributes of raw and finished goods to include batter thickness, height, diameter, color, temperature, and weights at various stages of the process, baked temperatures, finished food evaluations etc. Maintains thermometer calibration adjustments / logs and batter strainer logs daily. Puts non-conforming product on hold as needed for further management review, investigation and final disposition Verifies GMP's are being followed with non-conformances being documented as well as Performs specification studies to monitor process controls as needed. Education/Training Required: Ability to read, write legibly, and perform simple mathematical functions. Preferred: HS Diploma or GED Experience/Knowledge/Abilities Required: 1+ years food experience in a production environment. Demonstrated excellent communication, teamwork & partnership skills. Able to effectively resolve conflict in challenging situations. Preferred: 1+ years' experience in a Quality role. Bi-lingual in English and Spanish Personal Protective Equipment (PPE): Slip resistant footwear Apron or smock or uniform Company supplied gloves Hairnet/beard net Ear, eye, and head protection gear Employees Supervised: None Work Environment : Typical food manufacturing environment with regular exposure to heat and cold environments depending on the area assigned. Safety Sensitive Position: Yes

Job Description Department: Quality Reports To: Quality Manager FLSA Status: Non-Exempt Why Central Moloney? Since 1949, Central Moloney has been an industry leader in transformer manufacturing, with an unwavering commitment to quality and innovation. As an ISO 9001-certified company, we offer stability, hands-on learning, and a supportive culture that values every individual. Join a team where your attention to detail directly impacts the reliability of the power grid. At Central Moloney, we don't just manufacture transformers-we power the infrastructure that keeps homes, hospitals, and communities running. As a QC Receiving Inspector, you play a critical role in ensuring incoming materials meet quality standards before they ever reach production. Position Description: The QC Receiving Inspector is responsible for inspecting incoming materials, components, and parts to ensure compliance with engineering drawings, specifications, and quality standards. This role supports production by identifying nonconforming materials, maintaining accurate inspection records, and ensuring only approved materials enter the manufacturing process. The position requires strong attention to detail, consistency, and the ability to follow established inspection procedures in a fast-paced manufacturing environment. Position Responsibilities / Duties: Inspect incoming raw materials, components, and purchased parts in the receiving area for conformance to drawings, specifications, and quality requirements. Verify dimensions, quantities, and visual characteristics using measuring tools such as calipers, tape measures, and gauges. Review and interpret engineering drawings, purchase orders, and inspection criteria. Document inspection results accurately and complete rejection or nonconformance reports for materials that do not meet specifications. Clearly tag, segregate, and communicate nonconforming material to Quality, Purchasing, and Operations teams. Maintain organized inspection records and documentation in accordance with ISO 9001 and company quality procedures. Support audits and quality reviews as needed. Follow all safety, quality, and company policies while working in the receiving and inspection areas. Communicate effectively with team members and supervisors regarding inspection findings and material status. Requirements Qualifications Education: High school diploma or equivalent required. Technical or vocational coursework related to quality, manufacturing, or inspection is a plus. Experience: Prior experience in quality control, receiving inspection, or manufacturing inspection preferred. Experience working in a manufacturing or industrial environment is strongly desired. Skills and Competencies: Ability to read and interpret engineering drawings and specifications. Proficiency using basic measuring tools (calipers, rulers, tape measures, gauges). Strong attention to detail and commitment to accuracy. Ability to complete inspection and rejection reports clearly and accurately. Familiarity with quality systems, procedures, and documentation. Ability to work independently while meeting daily deadlines. Effective communication skills and a team-oriented mindset. Comfortable working in a fast-paced manufacturing environment. Physical and Environmental Requirements Lifting: Able to lift 50 pounds unassisted. Environment: Work in a facility with loud noise, extreme temperatures, and environmental stressors. Physical Activities: Sit, stand, walk, bend, climb, crouch, reach, and grasp as needed. PPE: Wear required PPE, including eye and hearing protection, gloves, and safety toe footwear. Dexterity and Vision: Manual dexterity and specific vision abilities (close, distance, color, peripheral, depth perception, and focus adjustment). Stamina: Stand for long shifts. Skills: Effective communication, basic math skills, and teamwork. Safety: Adhere to safety protocols and address hazards. Benefits Benefits Medical, Dental, Life Insurance, 401(k) Please Note & Review the Following: This position is considered safety-sensitive because impairment by drugs or alcohol may constitute a threat to health or safety, and/or a lapse of attention could result in injury, illness, or death. Central Moloney is a tobacco-free facility. The use of tobacco products (including cigarettes, cigars, smokeless tobacco, and e-cigarettes/vapes) is not permitted on company property. Equal Opportunity Employer Statement Central Moloney is an equal opportunity employer. We make employment decisions based on qualifications, merit, and business needs. We do not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, marital or family status, genetic information, veteran status, or any other status protected by law. We are committed to creating a respectful, fair, and welcoming workplace for all, and we believe that a variety of experiences and perspectives strengthens our team. Recruitment Policy: No Third-Party Involvement We value the interest of all job seekers; however, we do not accept unsolicited resumes or candidate submissions from recruitment agencies, staffing firms, or third-party recruiters. Any resumes submitted in the absence of a signed agreement with Central Moloney will be considered the property of CMI. Central Moloney will not be responsible for any fees related to unsolicited resumes.

Job Description America's Car-Mart ???? ???? Job Type: Full-Time ???? Industry: Vehicle Reconditioning / Fleet Operations / Inventory Management Join a Company That Puts People First At America's Car-Mart, we're not just about selling vehicles-we're about building relationships and delivering value to our customers and communities. We're looking for a Quality Control Inspector who shares our passion for precision, affordability, and doing things right the first time. ???? What You'll Do Calling all detail-driven researchers! Are you someone who loves digging deep to find the perfect solution? We're looking for a Parts/Researcher Coordinator who thrives on uncovering the best parts at unbeatable prices and ensuring they arrive right on time. If you're passionate about research, coordination, and love the thrill of getting things right-this is the perfect fit. Apply today and turn your passion for research into a rewarding career! ???? Key Responsibilities Source and order parts for vehicle reconditioning across multiple locations Research and compare vendors to find the best pricing and availability Track shipments and ensure timely delivery to meet reconditioning deadlines Maintain accurate inventory records and cost tracking Collaborate with service teams to align parts availability with workflow Analyze purchasing trends and identify cost-saving opportunities Build and maintain strong vendor relationships ???? What You Bring Experience in parts coordination, procurement, or vendor research (automotive or fleet preferred) Strong attention to detail and organizational skills Excellent communication and negotiation abilities Proficiency with spreadsheets, inventory software, and online sourcing tools A proactive mindset and a passion for problem-solving ???? Compensation & Benefits Base pay: $18-$22/hour, depending on experience Monthly performance bonus based on cost savings, sourcing efficiency, and inventory accuracy Health, dental, and vision insurance Paid time off and holidays Career growth opportunities within a growing company A supportive, people-first culture Apply now on Indeed and become part of the Car-Mart family-where your work drives real impact in Hot Springs and beyond. Employment is contingent upon your pre-employment background review, drug test, satisfactory MVR, and any state or local requirements for necessary licensure, as applicable #LOT1

and our ONE team, visit careersthatcrush.com. COME WORK FOR A ROCK SOLID TEAM! What we offer: * Competitive Pay for Experience with annual performance increases * $1.00 Night Shift Diff * PTO Available as of DAY ONE * 401(k) plan with company match * Employee Pension Plan (FREE to employees) * Full Medical, Health & Wellness Benefits start on FIRST DAY * Hiring for NIGHTS Position Summary Responsibilities include sampling and performing routine laboratory testing of aggregate material. Use prescribed standards to determine chemical and/or physical characteristics for quality control purposes and to determine conformity to specifications. Set up, adjustment and operation of laboratory equipment and instrumentations such as agitators, scales, ovens and other lab equipment required. Work around industrial equipment and machinery to obtain materials samples from production facilities such as conveyors, stockpiles, rail cars and/or customer sites. Record test results in AggQC and/or standardized forms. Report and communicate test results internally and externally (DOT and other customers as required). Clean, maintain and calibrate laboratory equipment. Inspect stockpiles for proper construction. Inspect haul units for cleanliness. Maintain test data files. Assist in investigating and resolving customer technical problems. Become GDOT certified within a reasonable time. Participate as a team member. Perform other related duties as assigned by supervisor. Knowledge, Skills, Abilities * High School diploma, GED or equivalent experience required; technical degree preferred * State certified for aggregate field and laboratory testing in GA preferred; ability to obtain state certification required * Minimum of 2 years' experience in quality control in an aggregate or construction environment * Excellent interpersonal, verbal, and written communication skills * Proficient in MS Office and computer skills * Must have basic math skills * Proactive in safety and works well in a team environment * Minimal travel required * Must be able to work 12 hour shifts, possible weekends, overtime, and holidays as needed * Must be able to read equipment operating manual * Must be able to complete pre-shift inspection report * Must be able to read and interpret gauges * Possess basic mathematical aptitude to complete daily reports * Must be able to wear all required safety equipment * Must be able to communicate over CB radio or with hand signals and warning sounds, with coworkers regarding movement of vehicles and mobile equipment * Must be able to perform duties in a safe manner * Must be service oriented with proven ability to work in a TEAM environment Physical Requirements * Must be able to climb on and off equipment * Must be able to bend, stoop, squat, crouch, kneel * Capable of lifting and carrying up to 50 lbs * Must work outside in all weather conditions consistent with extreme ambient temperatures: heat, cold, wetness, dryness, dust, and noisy conditions * Must be able to work at various heights WORKING CONDITIONS Larger equipment is typically air conditioned. There will be times when outside assignments may require periods of work in all weather conditions-heat, cold, wet or dry and dusty. Must be able to work in areas where noise levels are up to 85 dbs. DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.

Job Description Responsible for performing inspections of aircraft maintenance and alterations for quality and airworthiness. The Quality Control Inspector may also perform aircraft maintenance (including inspection), preventive maintenance and alteration and assist customers with technical and operational support relative to the customer's aircraft. DUTIES AND RESPONSIBILITES Responsible for Quality Assurance for quality and airworthiness and may report to Maintenance Supervision for the assignment of aircraft maintenance tasks. Using technical data acceptable to and/or approved by the FAA, the Quality Control Inspector provides inspection and approval for return to service with respect to work performed. Adheres to general work and safety requirements. May travel to locations other than the Repair Station's fixed location to support customer aircraft. May perform inspections, adjusts and repairs, replace components and corrects any malfunction or deficiency with and without power applied to the aircraft. May perform repairs on components removed from the aircraft. May remove and re-install aircraft components to gain access for the performance of assigned tasks. May troubleshoot (fault isolation) aircraft system malfunction. May perform basic mechanical and electrical removals and installations. Documents, records, and signs for work performed and/or inspected per RSM/QCM. Perform other related tasks as assigned by supervision. May fuel and defuel aircraft. May perform aircraft line services. Performs inspection on-site and at off-site locations. Supports production aircraft under Production Certificate System. Assists other employees in the performance of their duties within area(s) of qualification. Is familiar with and adheres to the RSM/QCM and applicable regulations. Is responsible for and accountable for work performed. QUALIFICATIONS Possess a Mechanics certificate with Airframe and Power plant ratings. Minimum 5 years' experience in aircraft maintenance and alteration of turbo fan powered business aircraft. Trained in or experience with the methods, techniques, practices, aids, equipment, and tools used to perform aircraft maintenance and alterations. Minimum 5 years' experience working on our Falcon models. Thoroughly familiar with the applicable regulations, the RSM/QCM and proficient in the use of the various inspection methods, techniques, practices, aids, equipment, and tools appropriate for the work being performed and approved for return to service. Able to work unsupervised for extended periods. Excellent written and verbal communications skills. Can Do attitude - highly motivated, Demonstrate excellent customer service skills. Team player that exhibits and models Dassault Falcon Jet core values and attributes. Repair Station Training Applicable Airframe Initial Training Applicable Engine Training Applicable Avionics Systems Training RVSM Training FAR 91.411/FAR 91.413 Training Human Factors Training Performs duties as assigned.

About the Company: We provide specialized subcontracting and technical assistance services to support clients in the transport and aerospace industries. We work closely with clients to ensure that our solutions meet their needs and exceed their expectations. Our team members are motivated individuals that do remarkable things every day! Position Summary: AAA, United States, Inc. has partnered with a company in Little Rock, Arkansas that shapes the future by designing and building military aircraft, business jets and space systems. We are looking for experienced Quality Control B Inspectors who are seeking their next opportunity in a complex and ever-changing work environment! The Quality Control B Inspector inspects parts and components to known standards to ensure conformity of products including cosmetic acceptability. They will conduct interior shell component and in-process inspections as well as verify that parts and components conform to approved data. They will also properly document all inspections and verifications to support the build of the aircraft. Essential Functions: Interpret data, CATIA models, company standards, work instructions, and perform necessary calculations using shop math to conform detail parts, tooling, assemblies and installations and document results. Perform complete inspection of components, major assemblies, sub-assemblies, production tools or parts during manufacturing, modifications, repairs & installations to determine safety or conformity to approved data & company standards & specifications. Properly documents findings and actions taken. Interpret and verify per complex data, engineering change orders and governmental regulatory procedures and specifications and properly document results. Apply technical knowledge in the fields of manufacturing and assembly, plumbing, electrical, etc. to determine conformity, approval for return to service, & airworthiness. Use precision measuring guides, gauges and laboratory type instruments. Suggest dispositions of damaged or worn parts and the possibility of salvage based on company practices or procedures. Be familiar with relative FAA/EASA regulations and requirements. Be familiar with regulatory processes. Prepare necessary customer and/or company documents. Complete and maintain reports and records as required. Assist other personnel on specific job assignments as requested by Quality Management. Maintain a clean and organized work area. Complete tasks accurately and thoroughly. May perform inspections of incoming purchased parts and products. May perform inspections of outgoing parts and products being shipped from customer. Work in a safe manner in accordance with OSHA and company safety regulations/procedures. Requirements High school diploma or equivalent. Two (2) years' experience in an aircraft or aeronautical environment. Must possess above average verbal, written skills, and interpersonal communication skills. Must possess well-developed critical thinking, logic, and analytical skills. Able to work from heights or small-enclosed areas for short periods with or without reasonable accommodation. Able to climb, stoop, bend, kneel, and/or work from unleveled surfaces with or without reasonable accommodation. Ability to read and interpret complex drawings, 3D models and specifications. Able to use precision measuring tools, gauges, and laboratory type instruments. Must possess computer literacy with the ability to learn new applications. Must be pro-active and team oriented. Pass vision testing, minimum 20/20 corrected, and with no limitations in color perception. Regulatory issued Airframe & Powerplant (A & P) license. Able to work unsupervised for short periods. Aircraft/aviation experience specific to the area of assignment (e.g., upholstery, cabinet, etc.)

JobID: 8801 JobSchedule: Full time JobShift: Day : As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America Job Summary Basic Job FunctionsPosition is required to assist in the inspection, acceptance, and/or rejection of work performed in a particular discipline in compliance with applicable codes and/or specifications as dictated by quality programs and/or contract documents and specifications.Structural Inspection:Experience level must fall within the erection of structural steel. Must be able to work in elevated areas. Must have knowledge of AISC, AWS D1.1, and AWS D1.6 Codes. Must have knowledge of bolt?up inspection including bolt lot verifications using Skidmore?Wilhelm. Additionally, must have knowledge of architectural, insulation and lagging, grout and concrete placement, Epoxy anchor installation inspection. Must have CWI (Certified Welding Inspector) certification.Electrical and Instrumentation Inspection:Experience must fall in the installation of electrical and instrumentation components, including interconnecting wiring, cables, and tubing. Must be knowledgeable of ICEA, IEEE, ISA, NEC, NEMA, NESC, and NFPA Codes and standards.Mechanical Inspection:Experience level must fall in the setting and alignment of static and rotating equipment, equipment skids, coolers, tanks, and interconnecting process piping fabrication and installation. Must be able to use measuring tools such as micrometers, calipers, transits, etc. and be able to set up dial indicators and laser alignment devices.Piping Inspection:Experience level must fall in pipe installation inspection, including welding, supports, instrumentation, etc. Must have CWI (Certified Welding Inspector) certification. Key Responsibilities 1. Assists material handling personnel with required material storage and PM requirements as needed. 2. Communicates with others regarding inspections results and recommends corrective procedures. 3. Participates in activities to support the company's strategic planning efforts. 4. Participates in the preparation of Quality control ITP. 5. Performs control measuring and tests equipment. 6. Verifies the installation of the systems, components and equipment in accordance with the assigned discipline. Minimum Job Requirements 1. 1+ year construction practices 2. 1+ year in quality control inspection discipline 3. HS Degree Required 4. Proficient use of all Microsoft Office Suite programs Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefit list: Market Competitive Salary (paid weekly) Bonus Eligibility based on company, group, and individual performance Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting Your First Day Flexible Time Off (FTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program #LI-KW1

The Quality Assurance Inspector monitors, records and verifies key production quality indicators and Process Critical Control Points for incoming raw materials and all production operations. Essential Job Functions Monitors inbound raw bulk material for proper truck seals, bin placement to assure proper rotation / and storage requirements, and appropriate Certificates of Analysis to match actual inbound ingredients Verifies food safety plan HACCP to assure compliance and makes proper notifications if the process does not conform to specifications. Specifically checks the following: Metal detector verifications every hour +/- 15 minutes Bar Code validator verifications every two (2) hours +/- 15 minutes Internal product cook temperature every hour +/- 15 minutes Package seals and container seals verified hourly +/- 15 minutes Batter temperature verified hourly +/- 15 minutes PES (Product evaluation system) review hourly +/- 15 minutes Verifies code dates on all packages as required Monitors quality attributes of raw and finished goods to include batter thickness, height, diameter, color, temperature, and weights at various stages of the process, baked temperatures, finished food evaluations etc. Maintains thermometer calibration adjustments / logs and batter strainer logs daily. Puts non-conforming product on hold as needed for further management review, investigation and final disposition Verifies GMP's are being followed with non-conformances being documented as well as Performs specification studies to monitor process controls as needed. Education/Training Required: Ability to read, write legibly, and perform simple mathematical functions. Preferred: HS Diploma or GED Experience/Knowledge/Abilities Required: 1+ years food experience in a production environment. Demonstrated excellent communication, teamwork & partnership skills. Able to effectively resolve conflict in challenging situations. Preferred: 1+ years' experience in a Quality role. Bi-lingual in English and Spanish Personal Protective Equipment (PPE): Slip resistant footwear Apron or smock or uniform Company supplied gloves Hairnet/beard net Ear, eye, and head protection gear Employees Supervised: None Work Environment: Typical food manufacturing environment with regular exposure to heat and cold environments depending on the area assigned. Safety Sensitive Position: Yes Rotating schedule. 7am-7pm

Department: Quality Reports To: Quality Manager FLSA Status: Non-Exempt Why Central Moloney? Since 1949, Central Moloney has been an industry leader in transformer manufacturing, with an unwavering commitment to quality and innovation. As an ISO 9001-certified company, we offer stability, hands-on learning, and a supportive culture that values every individual. Join a team where your attention to detail directly impacts the reliability of the power grid. At Central Moloney, we don't just manufacture transformers-we power the infrastructure that keeps homes, hospitals, and communities running. As a QC Receiving Inspector, you play a critical role in ensuring incoming materials meet quality standards before they ever reach production. Position Description: The QC Receiving Inspector is responsible for inspecting incoming materials, components, and parts to ensure compliance with engineering drawings, specifications, and quality standards. This role supports production by identifying nonconforming materials, maintaining accurate inspection records, and ensuring only approved materials enter the manufacturing process. The position requires strong attention to detail, consistency, and the ability to follow established inspection procedures in a fast-paced manufacturing environment. Position Responsibilities / Duties: Inspect incoming raw materials, components, and purchased parts in the receiving area for conformance to drawings, specifications, and quality requirements. Verify dimensions, quantities, and visual characteristics using measuring tools such as calipers, tape measures, and gauges. Review and interpret engineering drawings, purchase orders, and inspection criteria. Document inspection results accurately and complete rejection or nonconformance reports for materials that do not meet specifications. Clearly tag, segregate, and communicate nonconforming material to Quality, Purchasing, and Operations teams. Maintain organized inspection records and documentation in accordance with ISO 9001 and company quality procedures. Support audits and quality reviews as needed. Follow all safety, quality, and company policies while working in the receiving and inspection areas. Communicate effectively with team members and supervisors regarding inspection findings and material status. Requirements Qualifications Education: High school diploma or equivalent required. Technical or vocational coursework related to quality, manufacturing, or inspection is a plus. Experience: Prior experience in quality control, receiving inspection, or manufacturing inspection preferred. Experience working in a manufacturing or industrial environment is strongly desired. Skills and Competencies: Ability to read and interpret engineering drawings and specifications. Proficiency using basic measuring tools (calipers, rulers, tape measures, gauges). Strong attention to detail and commitment to accuracy. Ability to complete inspection and rejection reports clearly and accurately. Familiarity with quality systems, procedures, and documentation. Ability to work independently while meeting daily deadlines. Effective communication skills and a team-oriented mindset. Comfortable working in a fast-paced manufacturing environment. Physical and Environmental Requirements Lifting: Able to lift 50 pounds unassisted. Environment: Work in a facility with loud noise, extreme temperatures, and environmental stressors. Physical Activities: Sit, stand, walk, bend, climb, crouch, reach, and grasp as needed. PPE: Wear required PPE, including eye and hearing protection, gloves, and safety toe footwear. Dexterity and Vision: Manual dexterity and specific vision abilities (close, distance, color, peripheral, depth perception, and focus adjustment). Stamina: Stand for long shifts. Skills: Effective communication, basic math skills, and teamwork. Safety: Adhere to safety protocols and address hazards. Benefits Benefits Medical, Dental, Life Insurance, 401(k) Please Note & Review the Following: This position is considered safety-sensitive because impairment by drugs or alcohol may constitute a threat to health or safety, and/or a lapse of attention could result in injury, illness, or death. Central Moloney is a tobacco-free facility. The use of tobacco products (including cigarettes, cigars, smokeless tobacco, and e-cigarettes/vapes) is not permitted on company property. Equal Opportunity Employer Statement Central Moloney is an equal opportunity employer. We make employment decisions based on qualifications, merit, and business needs. We do not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, marital or family status, genetic information, veteran status, or any other status protected by law. We are committed to creating a respectful, fair, and welcoming workplace for all, and we believe that a variety of experiences and perspectives strengthens our team. Recruitment Policy: No Third-Party Involvement We value the interest of all job seekers; however, we do not accept unsolicited resumes or candidate submissions from recruitment agencies, staffing firms, or third-party recruiters. Any resumes submitted in the absence of a signed agreement with Central Moloney will be considered the property of CMI. Central Moloney will not be responsible for any fees related to unsolicited resumes. 📍 Where We Hire Central Moloney is currently authorized to employ individuals (remote or on-site) only in the following states: Arkansas (AR), Florida (FL), Kansas (KS), Tennessee (TN), Texas (TX), and Wisconsin (WI). Candidates must physically reside in one of these states to be eligible for employment. Employment across state lines is not permitted.

America's Car-Mart Job Type: Full-Time Industry: Vehicle Reconditioning / Fleet Operations / Inventory Management Join a Company That Puts People First At America's Car-Mart, we're not just about selling vehicles-we're about building relationships and delivering value to our customers and communities. We're looking for a Quality Control Inspector who shares our passion for precision, affordability, and doing things right the first time. What You'll Do Calling all detail-driven researchers! Are you someone who loves digging deep to find the perfect solution? We're looking for a Parts/Researcher Coordinator who thrives on uncovering the best parts at unbeatable prices and ensuring they arrive right on time. If you're passionate about research, coordination, and love the thrill of getting things right-this is the perfect fit. Apply today and turn your passion for research into a rewarding career! Key Responsibilities * Source and order parts for vehicle reconditioning across multiple locations * Research and compare vendors to find the best pricing and availability * Track shipments and ensure timely delivery to meet reconditioning deadlines * Maintain accurate inventory records and cost tracking * Collaborate with service teams to align parts availability with workflow * Analyze purchasing trends and identify cost-saving opportunities * Build and maintain strong vendor relationships What You Bring * Experience in parts coordination, procurement, or vendor research (automotive or fleet preferred) * Strong attention to detail and organizational skills * Excellent communication and negotiation abilities * Proficiency with spreadsheets, inventory software, and online sourcing tools * A proactive mindset and a passion for problem-solving Compensation & Benefits * Base pay: $18-$22/hour, depending on experience * Monthly performance bonus based on cost savings, sourcing efficiency, and inventory accuracy * Health, dental, and vision insurance * Paid time off and holidays * Career growth opportunities within a growing company * A supportive, people-first culture Apply now on Indeed and become part of the Car-Mart family-where your work drives real impact in Hot Springs and beyond. Employment is contingent upon your pre-employment background review, drug test, satisfactory MVR, and any state or local requirements for necessary licensure, as applicable #LOT1

Responsible for performing inspections of aircraft maintenance and alterations for quality and airworthiness. The Quality Control Inspector may also perform aircraft maintenance (including inspection), preventive maintenance and alteration and assist customers with technical and operational support relative to the customer's aircraft. DUTIES AND RESPONSIBILITES * Responsible for Quality Assurance for quality and airworthiness and may report to Maintenance Supervision for the assignment of aircraft maintenance tasks. * Using technical data acceptable to and/or approved by the FAA, the Quality Control Inspector provides inspection and approval for return to service with respect to work performed. * Adheres to general work and safety requirements. * May travel to locations other than the Repair Station's fixed location to support customer aircraft. * May perform inspections, adjusts and repairs, replace components and corrects any malfunction or deficiency with and without power applied to the aircraft. * May perform repairs on components removed from the aircraft. * May remove and re-install aircraft components to gain access for the performance of assigned tasks. * May troubleshoot (fault isolation) aircraft system malfunction. * May perform basic mechanical and electrical removals and installations. * Documents, records, and signs for work performed and/or inspected per RSM/QCM. * Perform other related tasks as assigned by supervision. * May fuel and defuel aircraft. * May perform aircraft line services. * Performs inspection on-site and at off-site locations. * Supports production aircraft under Production Certificate System. * Assists other employees in the performance of their duties within area(s) of qualification. * Is familiar with and adheres to the RSM/QCM and applicable regulations. * Is responsible for and accountable for work performed. QUALIFICATIONS * Possess a Mechanics certificate with Airframe and Power plant ratings. * Minimum 5 years' experience in aircraft maintenance and alteration of turbo fan powered business aircraft. * Trained in or experience with the methods, techniques, practices, aids, equipment, and tools used to perform aircraft maintenance and alterations. * Minimum 5 years' experience working on our Falcon models. * Thoroughly familiar with the applicable regulations, the RSM/QCM and proficient in the use of the various inspection methods, techniques, practices, aids, equipment, and tools appropriate for the work being performed and approved for return to service. * Able to work unsupervised for extended periods. * Excellent written and verbal communications skills. * Can Do attitude - highly motivated, * Demonstrate excellent customer service skills. * Team player that exhibits and models Dassault Falcon Jet core values and attributes. * Repair Station Training * Applicable Airframe Initial Training * Applicable Engine Training * Applicable Avionics Systems Training * RVSM Training * FAR 91.411/FAR 91.413 Training * Human Factors Training * Performs duties as assigned.

As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America Job Summary Basic Job FunctionsPosition is required to assist in the inspection, acceptance, and/or rejection of work performed in a particular discipline in compliance with applicable codes and/or specifications as dictated by quality programs and/or contract documents and specifications.Structural Inspection:Experience level must fall within the erection of structural steel. Must be able to work in elevated areas. Must have knowledge of AISC, AWS D1.1, and AWS D1.6 Codes. Must have knowledge of bolt?up inspection including bolt lot verifications using Skidmore?Wilhelm. Additionally, must have knowledge of architectural, insulation and lagging, grout and concrete placement, Epoxy anchor installation inspection. Must have CWI (Certified Welding Inspector) certification.Electrical and Instrumentation Inspection:Experience must fall in the installation of electrical and instrumentation components, including interconnecting wiring, cables, and tubing. Must be knowledgeable of ICEA, IEEE, ISA, NEC, NEMA, NESC, and NFPA Codes and standards.Mechanical Inspection:Experience level must fall in the setting and alignment of static and rotating equipment, equipment skids, coolers, tanks, and interconnecting process piping fabrication and installation. Must be able to use measuring tools such as micrometers, calipers, transits, etc. and be able to set up dial indicators and laser alignment devices.Piping Inspection:Experience level must fall in pipe installation inspection, including welding, supports, instrumentation, etc. Must have CWI (Certified Welding Inspector) certification. Key Responsibilities 1. Assists material handling personnel with required material storage and PM requirements as needed. 2. Communicates with others regarding inspections results and recommends corrective procedures. 3. Participates in activities to support the company's strategic planning efforts. 4. Participates in the preparation of Quality control ITP. 5. Performs control measuring and tests equipment. 6. Verifies the installation of the systems, components and equipment in accordance with the assigned discipline. Minimum Job Requirements 1. 1+ year construction practices 2. 1+ year in quality control inspection discipline 3. HS Degree Required 4. Proficient use of all Microsoft Office Suite programs Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefit list: Market Competitive Salary (paid weekly) Bonus Eligibility based on company, group, and individual performance Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting Your First Day Flexible Time Off (FTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program #LI-KW1

America's Car-Mart 📍 🕒 Job Type: Full-Time 💼 Industry: Vehicle Reconditioning / Fleet Operations / Inventory Management Join a Company That Puts People First At America's Car-Mart, we're not just about selling vehicles-we're about building relationships and delivering value to our customers and communities. We're looking for a Quality Control Inspector who shares our passion for precision, affordability, and doing things right the first time. 🚗 What You'll Do Calling all detail-driven researchers! Are you someone who loves digging deep to find the perfect solution? We're looking for a Parts/Researcher Coordinator who thrives on uncovering the best parts at unbeatable prices and ensuring they arrive right on time. If you're passionate about research, coordination, and love the thrill of getting things right-this is the perfect fit. Apply today and turn your passion for research into a rewarding career! 🔧 Key Responsibilities Source and order parts for vehicle reconditioning across multiple locations Research and compare vendors to find the best pricing and availability Track shipments and ensure timely delivery to meet reconditioning deadlines Maintain accurate inventory records and cost tracking Collaborate with service teams to align parts availability with workflow Analyze purchasing trends and identify cost-saving opportunities Build and maintain strong vendor relationships 🎯 What You Bring Experience in parts coordination, procurement, or vendor research (automotive or fleet preferred) Strong attention to detail and organizational skills Excellent communication and negotiation abilities Proficiency with spreadsheets, inventory software, and online sourcing tools A proactive mindset and a passion for problem-solving 💰 Compensation & Benefits Base pay: $18-$22/hour, depending on experience Monthly performance bonus based on cost savings, sourcing efficiency, and inventory accuracy Health, dental, and vision insurance Paid time off and holidays Career growth opportunities within a growing company A supportive, people-first culture Apply now on Indeed and become part of the Car-Mart family-where your work drives real impact in Hot Springs and beyond. Employment is contingent upon your pre-employment background review, drug test, satisfactory MVR, and any state or local requirements for necessary licensure, as applicable #LOT1