Quality control inspector jobs in Amarillo, TX - 26 jobs

Job Title: QA Inspection Technician - Special Tooling Visually inspects weapons tooling through visual inspections and records reviews to verify conformance to procurement requirements. Visually inspects procured items for Suspect/Counterfeit Items. Performs records and data review of support documents to verify compliance with written procedures. Performs other duties as assigned depending on area of assignment. Obtains operating procedures, engineering documents, drawings, and other specifications, for preparation final acceptance activities as assigned. Reviews weapons related records for accuracy and completeness. Responsible for visual verification of in-process and final product to ensure completeness and accuracy of product and records. Performs assignments with a high degree of quality, accuracy, and efficiency exercising prescribed safety and security measures. Works effectively with managers, co-workers, representatives of other Departments/Divisions, and outside agencies. Follows prescribed standards of housekeeping and cleanliness of work area to ensure safety and efficient operations. Responsible for detecting defects in material and workmanship. Responsible for care and protection of assigned materials and/or equipment. Performs functions with a high degree of accuracy in all phases of duties under general supervision. Responsible for maintaining a knowledge of applicable Federal, State, Department of Energy (DOE), Corporate and Plant rules, regulations, Labor Agreements and Plant-wide operating policies and procedures. Performs other duties as assigned. Required to attend and/or successfully complete training classes as determined by Product Quality management and the Training and Development Technologies Department, through General Employee Training (Reference DOE Order 426.2), and Management. Participates in worker involvement including input to work planning and methods to identify hazards and controls. Understands a workers' right to stop work when they feel their own or others personal safety is jeopardized. Attends all required safety meetings and training. Offers suggestions on improvements to the work environment. Skills and Minimum Qualifications Must meet initial employment requirements. Must be able to perform all duties and functions outlined above. Must be able to read, write, and comprehend applicable written and/or oral instructions. Must be physically fit to perform the above job functions as determined by Medical Evaluation. Must be able to be qualified for the Human Reliability Program (HRP) certification. Must be able to complete all training necessary to be certified for weapon work. Minimum of one-year gainful experience in mechanical or electronics work that involved working to close tolerances, with proven ability to read and interpret drawings and specifications, or equivalent education and/or training. Ability to maintain neat, accurate, concise and complete records and files for inspections. All qualifications, work history, training, and education are to be verified by direct contact with former employers and/or documented proof. Ability to perform the functions and responsibilities involved will be determined by a comprehensive interview and background evaluation. Required to complete course(s) in drawing reading and interpretation. What You Can Expect Meaningful work and unique opportunities to support missions vital to national and global security. Top-notch, dedicated colleagues. Generous pay and benefits with .a stable organization. Education High School diploma or (GED) General Equivalency Diploma. DOE 426.2A Requirements In addition to the above requirements, the applicant must also meet the requirements of DOE O 426.2A (i.e., High School diploma, or a DOE O 426.2A alternative). DOE O 426.2A experience requirements can be satisfied following employment. In the interim, newly hired personnel will not be assigned duties that could impact the safety basis of nuclear facilities. (Ref. DOE O 426.2A) Functional Requirements Lifting or carrying less than 40 pounds Straight pulling or pushing (2 hours/day) Ability to keyboard Repetitive motion of the wrist/forearm Walking (2 hours/day) Standing (2 hours/day) Climbing with legs only (stairs) Near vision (must be able to read computer screen, manuscript, book etc, at approximately 13-16 inches from the face) Depth perception (ability to tell how close or far an object is) Good hearing No evidence of current drug or alcohol abuse Ability to perform safety-sensitive duties Environmental Factors Radiation exposure (plutonium, tritium, uranium) Around moving vehicles Prolonged or irregular hours Shift work - specify - Swing/Graves Explosives Why Pantex? You get #morethanajob. We encourage employees to achieve a healthy personal balance among home, work and the community. One of the ways we embrace work-life balance is by offering flexible work arrangements that provide alternatives to the traditional workweek, while still meeting business needs. Top talent and personal commitment mean more to our success than any other factors, so we reward our people with the kinds of benefits that make a positive difference in the quality of their lives. Benefits such as: medical plan, prescription drug plan, vision plan, dental plan, employer matched 401(k) savings plan, disability coverage, education reimbursement and many more. Want to stay healthy and fit but hate the cost of a gym membership? Take advantage of one of our onsite workout facilities and eat healthy in our onsite cafeterias. Much more than a workplace, at Pantex, you can build a career that lasts a lifetime. Notes The minimum education and experience for the lowest career level in the job posting range are listed under Minimum Job Requirements. Successful candidates hired into a higher career level than the minimum in the range must meet the requirements listed in the job leveling charts for the career level into which they are being hired. If a range of Career Levels is posted, i.e., Senior Associate to Senior Specialist, internal applicants already in one of the Career Levels would come across at their current Career Level. Internal applicants currently in a lower level Career Level would move to the lowest posted Career Level. Requires a Q clearance; however all qualified candidates will be considered regardless of their current clearance status. The ability to obtain and maintain a Department of Energy Q clearance is required. Position may require entry into Materials Access Areas (MAA) and participation in the Human Reliability Program (HRP). If HRP is required, candidate must complete a counterintelligence-scope polygraph, pursuant to 10CFR 709. Medical requirements may apply. Pantex is a drug-free workplace. Candidates accepting a job offer will be required to pass a pre-placement physical, drug screening and background investigation. As an employee, you may be required to receive and maintain a security clearance from the United States Department of Energy in order to meet eligibility requirements for access to sensitive information or matter. U.S. citizenship is a requirement for security clearance applicants. All employees are subject to being randomly selected for drug testing without advance notification. Pantex is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, gender, sexual orientation, gender identity, age, religion, national origin, ancestry, genetic information, disability or veteran status.

Job Title: QA Inspection Technician - Special Tooling * Visually inspects weapons tooling through visual inspections and records reviews to verify conformance to procurement requirements. * Visually inspects procured items for Suspect/Counterfeit Items. * Performs records and data review of support documents to verify compliance with written procedures. * Performs other duties as assigned depending on area of assignment. * Obtains operating procedures, engineering documents, drawings, and other specifications, for preparation final acceptance activities as assigned. * Reviews weapons related records for accuracy and completeness. * Responsible for visual verification of in-process and final product to ensure completeness and accuracy of product and records. * Performs assignments with a high degree of quality, accuracy, and efficiency exercising prescribed safety and security measures. * Works effectively with managers, co-workers, representatives of other Departments/Divisions, and outside agencies. * Follows prescribed standards of housekeeping and cleanliness of work area to ensure safety and efficient operations. * Responsible for detecting defects in material and workmanship. * Responsible for care and protection of assigned materials and/or equipment. * Performs functions with a high degree of accuracy in all phases of duties under general supervision. * Responsible for maintaining a knowledge of applicable Federal, State, Department of Energy (DOE), Corporate and Plant rules, regulations, Labor Agreements and Plant-wide operating policies and procedures. * Performs other duties as assigned. * Required to attend and/or successfully complete training classes as determined by Product Quality management and the Training and Development Technologies Department, through General Employee Training (Reference DOE Order 426.2), and Management. * Participates in worker involvement including input to work planning and methods to identify hazards and controls. * Understands a workers' right to stop work when they feel their own or others personal safety is jeopardized. * Attends all required safety meetings and training. Offers suggestions on improvements to the work environment. Skills and Minimum Qualifications * Must meet initial employment requirements. * Must be able to perform all duties and functions outlined above. * Must be able to read, write, and comprehend applicable written and/or oral instructions. * Must be physically fit to perform the above job functions as determined by Medical Evaluation. * Must be able to be qualified for the Human Reliability Program (HRP) certification. * Must be able to complete all training necessary to be certified for weapon work. * Minimum of one-year gainful experience in mechanical or electronics work that involved working to close tolerances, with proven ability to read and interpret drawings and specifications, or equivalent education and/or training. * Ability to maintain neat, accurate, concise and complete records and files for inspections. * All qualifications, work history, training, and education are to be verified by direct contact with former employers and/or documented proof. Ability to perform the functions and responsibilities involved will be determined by a comprehensive interview and background evaluation. * Required to complete course(s) in drawing reading and interpretation. What You Can Expect * Meaningful work and unique opportunities to support missions vital to national and global security. * Top-notch, dedicated colleagues. * Generous pay and benefits with .a stable organization. Education * High School diploma or (GED) General Equivalency Diploma. DOE 426.2A Requirements * In addition to the above requirements, the applicant must also meet the requirements of DOE O 426.2A (i.e., High School diploma, or a DOE O 426.2A alternative). DOE O 426.2A experience requirements can be satisfied following employment. In the interim, newly hired personnel will not be assigned duties that could impact the safety basis of nuclear facilities. (Ref. DOE O 426.2A) Functional Requirements * Lifting or carrying less than 40 pounds * Straight pulling or pushing (2 hours/day) * Ability to keyboard * Repetitive motion of the wrist/forearm * Walking (2 hours/day) * Standing (2 hours/day) * Climbing with legs only (stairs) * Near vision (must be able to read computer screen, manuscript, book etc, at approximately 13-16 inches from the face) * Depth perception (ability to tell how close or far an object is) * Good hearing * No evidence of current drug or alcohol abuse * Ability to perform safety-sensitive duties Environmental Factors * Radiation exposure (plutonium, tritium, uranium) * Around moving vehicles * Prolonged or irregular hours * Shift work - specify - Swing/Graves * Explosives Why Pantex? You get #morethanajob. We encourage employees to achieve a healthy personal balance among home, work and the community. One of the ways we embrace work-life balance is by offering flexible work arrangements that provide alternatives to the traditional workweek, while still meeting business needs. Top talent and personal commitment mean more to our success than any other factors, so we reward our people with the kinds of benefits that make a positive difference in the quality of their lives. Benefits such as: medical plan, prescription drug plan, vision plan, dental plan, employer matched 401(k) savings plan, disability coverage, education reimbursement and many more. Want to stay healthy and fit but hate the cost of a gym membership? Take advantage of one of our onsite workout facilities and eat healthy in our onsite cafeterias. Much more than a workplace, at Pantex, you can build a career that lasts a lifetime. Notes The minimum education and experience for the lowest career level in the job posting range are listed under Minimum Job Requirements. Successful candidates hired into a higher career level than the minimum in the range must meet the requirements listed in the job leveling charts for the career level into which they are being hired. If a range of Career Levels is posted, i.e., Senior Associate to Senior Specialist, internal applicants already in one of the Career Levels would come across at their current Career Level. Internal applicants currently in a lower level Career Level would move to the lowest posted Career Level. Requires a Q clearance; however all qualified candidates will be considered regardless of their current clearance status. The ability to obtain and maintain a Department of Energy Q clearance is required. Position may require entry into Materials Access Areas (MAA) and participation in the Human Reliability Program (HRP). If HRP is required, candidate must complete a counterintelligence-scope polygraph, pursuant to 10CFR 709. Medical requirements may apply. Pantex is a drug-free workplace. Candidates accepting a job offer will be required to pass a pre-placement physical, drug screening and background investigation. As an employee, you may be required to receive and maintain a security clearance from the United States Department of Energy in order to meet eligibility requirements for access to sensitive information or matter. U.S. citizenship is a requirement for security clearance applicants. All employees are subject to being randomly selected for drug testing without advance notification. Pantex is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, gender, sexual orientation, gender identity, age, religion, national origin, ancestry, genetic information, disability or veteran status.

Job DescriptionApply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: To verify property occupancy. To report on the general condition of the property using a mobile application. Most inspections are exterior only. About 10% require interior photos after the property has gone vacant. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities Most common type of inspection should only take 5-6 minutes. Complete the inspection within 4 days after it is assigned. Report general property conditions and make a determination of occupancy based on industry standards. Take 9+ photos of the property with brief comments. Complete a short form in an app. Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory. Requirements (to be considered you must have the following): Computer with an internet connection Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas) Smartphone (Android or iPhone) Printer Pass a standard background check using a valid driver's license Pay and Hours This is a 1099 position. Each inspection has a flat rate. Rates vary based on county and volume. Although you are paid per inspection, you will earn the equivalent of $30-$40 per hour. Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only Powered by JazzHR NnC7CPtaL4

Amarillo Gear Company LLC As a part of the global industrial organization Marmon Holdings-which is backed by Berkshire Hathaway-you'll be doing things that matter, leading at every level, and winning a better way. We're committed to making a positive impact on the world, providing you with diverse learning and working opportunities, and fostering a culture where everyone's empowered to be their best. SCOPE: The Tool Specialist will provide assistance with CNC machine tooling (tool bodies, inserts, endmills, grinding wheels, etc.) and hand tooling (wrenches, hardware, etc.) for the manufacturing plant. They will be responsible for organizing, inventorying, and repairing tooling in the tool crib, ordering special tooling, sending off tooling to be repaired, setting up and maintaining tool setup package carts for various work-centers, and assisting with part changeover at various CNC machines. They will work with different departments to improve production flow and on-time delivery throughout the entire manufacturing plant. EDUCATION REQUIREMENTS/ EXERIENCE: * 2+ years of hands-on programming experience preferred * Ability to write and understand machine code preferred * Inventory experience * Be comfortable in a fast-paced environment * Some experience with CAD/CAM software, such as Autodesk Fusion * Strong communication and documentation skills, with the ability to communicate with machinists on machine processes * Highly proficient in Microsoft Office (Excel, Word, Access, PowerPoint, etc.) * Mathematically inclined RESPONSIBILITIES: * Ensure each CNC machine has all the tooling required to manufacture various parts ahead of time to help production flow smoothly through the shop. * Coordinate tool tests with the CNC Programmer and report CNC programming changes that need to be made to improve tool life and part quality. * Clean up extra unused tooling at each work-center and inventory it to be sharpened or reused. * Set up tool packages for CNC machine changeovers to ensure CNC operators have all tooling they need to perform quick changeovers. * Inventory current tooling used at work-centers (such as custom-made boring heads) to help identify where spare tooling will be required to help production flow. * Assist the CNC operators in part changeover duties in pit-crew style changeovers to help the changeover go quicker and smoother. * Help complete program changes/transfers when CNC Programmer needs support. * Perform other duties, as assigned. REQUIRED PHYSICAL DEMANDS: * Standing for more than 1 hour, walking more than 100 ft., reach above, at or below shoulders, climb stairs, bend, stoop, and/or squat, grasping, hand/wrist twisting, lifting of up to 50lbs. Following receipt of a conditional offer of employment, candidates will be required to complete additional job-related screening processes as permitted or required by applicable law. We are an equal opportunity employer, and all applicants will be considered for employment without attention to their membership in any protected class. If you require any reasonable accommodation to complete your application or any part of the recruiting process, please email your request to ******************, and please be sure to include the title and the location of the position for which you are applying.

We are seeking a passionate, dedicated Quality Control Technician to ensure our products exceed industry standards and client expectations. With a focus on quality, sustainability, and innovation, we serve a diverse range of clients across commercial, residential, and infrastructure projects. As a Quality Control Technician, you will play a crucial role in maintaining the quality and integrity of our concrete products. You will be responsible for conducting tests, analyzing data, and developing solutions to improve product quality. This position requires a keen eye for detail, a strong understanding of concrete technology, and the ability to work collaboratively with intersecting departments at SRM such as operations, production, sales, and technical services. Key Responsibilities: Conduct routine and non-routine analyses of raw materials, in-process, and finished concrete products using industry-standard methods. Interpret test results, compare them to established specifications and control limits, and make recommendations on the appropriateness of data for release. Perform visual inspections of finished products to ensure compliance with quality standards and specifications. Collaborate with production teams to identify and troubleshoot production challenges that affect quality. Assist in the development and implementation of quality control training programs for production staff. Maintain accurate and organized records of tests, analyses, and other quality-related activities. Stay updated with the latest trends, technologies, and regulations in the concrete industry to recommend improvements to our quality control processes. Qualifications Able to meet schedule requirements. Shifts vary based on scheduled pours. Candidates must be able to accommodate day shifts, as well as overnight shifts. ACI certification preferred Associate or bachelor's degree in Civil Engineering, Materials Science, Concrete Management, Construction Management, or related field is preferred. 1-3 years of experience in quality control or quality assurance, preferably in the concrete or construction materials industry. Strong understanding of concrete technology and testing methods. Excellent analytical skills and attention to detail. Effective communication and interpersonal skills. Ability to work independently and in a team environment. Proficiency in Microsoft Office and experience with quality management software. Willingness to undergo SRM's pre-employment screenings. About us: SRM strives to be the largest, most profitable construction material company in the country, while maintaining a best-in-class culture. SRM's 5 Principles of Service: Safety, Quality, Kindness, Cleanliness, Go-Getter Why Join Us? Our commitment to our team includes: Growth: Opportunities for advancement in a rapidly growing company. Home Daily: Enjoy work-life balance with daily home time. Competitive Compensation: Hourly pay with eligibility for bonuses and annual raises. Exceptional Benefits: Comprehensive benefits package including low-cost medical, dental, vision, STD, LTD, and life insurance, paid holidays, PTO and vacation programs, 401k with $100 match/week, family days, and more! Overtime Opportunities: Daily overtime after 8 hours and weekly after 40 hours Candidates will be required to undergo a pre-employment drug screen, SRM's pre-employment physical, and consent to background checks, including Clearinghouse and MVR checks. We are an equal-opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Amarillo Gear Company LLC As a part of the global industrial organization Marmon Holdings-which is backed by Berkshire Hathaway-you'll be doing things that matter, leading at every level, and winning a better way. We're committed to making a positive impact on the world, providing you with diverse learning and working opportunities, and fostering a culture where everyone's empowered to be their best. SCOPE: The Tool Specialist will provide assistance with CNC machine tooling (tool bodies, inserts, endmills, grinding wheels, etc.) and hand tooling (wrenches, hardware, etc.) for the manufacturing plant. They will be responsible for organizing, inventorying, and repairing tooling in the tool crib, ordering special tooling, sending off tooling to be repaired, setting up and maintaining tool setup package carts for various work-centers, and assisting with part changeover at various CNC machines. They will work with different departments to improve production flow and on-time delivery throughout the entire manufacturing plant. EDUCATION REQUIREMENTS/ EXERIENCE: 2+ years of hands-on programming experience preferred Ability to write and understand machine code preferred Inventory experience Be comfortable in a fast-paced environment Some experience with CAD/CAM software, such as Autodesk Fusion Strong communication and documentation skills, with the ability to communicate with machinists on machine processes Highly proficient in Microsoft Office (Excel, Word, Access, PowerPoint, etc.) Mathematically inclined RESPONSIBILITIES: Ensure each CNC machine has all the tooling required to manufacture various parts ahead of time to help production flow smoothly through the shop. Coordinate tool tests with the CNC Programmer and report CNC programming changes that need to be made to improve tool life and part quality. Clean up extra unused tooling at each work-center and inventory it to be sharpened or reused. Set up tool packages for CNC machine changeovers to ensure CNC operators have all tooling they need to perform quick changeovers. Inventory current tooling used at work-centers (such as custom-made boring heads) to help identify where spare tooling will be required to help production flow. Assist the CNC operators in part changeover duties in pit-crew style changeovers to help the changeover go quicker and smoother. Help complete program changes/transfers when CNC Programmer needs support. Perform other duties, as assigned. REQUIRED PHYSICAL DEMANDS: Standing for more than 1 hour, walking more than 100 ft., reach above, at or below shoulders, climb stairs, bend, stoop, and/or squat, grasping, hand/wrist twisting, lifting of up to 50lbs. Following receipt of a conditional offer of employment, candidates will be required to complete additional job-related screening processes as permitted or required by applicable law. We are an equal opportunity employer, and all applicants will be considered for employment without attention to their membership in any protected class. If you require any reasonable accommodation to complete your application or any part of the recruiting process, please email your request to ******************, and please be sure to include the title and the location of the position for which you are applying.

**Yearout Mechanical, a Legence company** Yearout Mechanical (********************* is a New Mexico based company specializing in the installation of mechanical and process systems for the commercial, government, manufacturing and industrial communities of New Mexico and Texas. Since our incorporation in August of 1964, Yearout Mechanical has consistently grown and expanded its capabilities, reaching its present position as the premier mechanical contractor in New Mexico. Our mission is to be invaluable to our partners (clients, vendors, industry, and employees) so they cannot imagine success without us, by providing comfortable, reliable and efficient mechanical systems that meet our partners' needs. **Quality Control Specialist - Yearout Mechanical** As a Quality Control Representative at Yearout Mechanical, you'll play a hands-on role in ensuring fabrication and installation quality for HVAC, plumbing, and process/utility systems across New Mexico and Texas. You will perform inspections, maintain documentation, and collaborate closely with Fabrication, Field, and BIM/VDC teams so every deliverable meets first-pass quality expectations through startup and turnover. **What You'll Do** **Perform inspections & tests** + Execute planned inspections and tests (ITPs/hold points) from material receiving through fit-up, supports/hangers, cleanliness/flush checks, pressure/leak testing, insulation/labeling, startup, and turnover. + Conduct field and shop walkdowns, dimensional checks, and system verification activities. **Apply codes & standards** + Use IMC/IPC, SMACNA, and applicable AWS/ASME elements (e.g., B31/Section IX) as required by project scope. + Follow established procedures and support updates to quality documents as needed. **Documentation & traceability** + Maintain quality records, including RFIs, submittals, test reports, redlines/as-builts, and inspection logs. + Ensure material and component traceability from model to shop to field. + Support preparation of QA/QC turnover packages. **NCR/CAPA support** + Identify nonconformances, document NCRs, and participate in root cause and corrective/preventive action activities. + Track and update status in quality databases and support timely closure. **Collaboration across teams** + Coordinate daily with Fabrication, Field, and BIM/VDC teams on spool releases, weld/bolt logs, checklists, and handoffs. + Communicate clearly with project teams to keep quality gates and schedules aligned. **Partner & inspector interface** + Support interactions with clients, vendors, GCs, third-party inspectors, and AHJs during inspections or audits. + Provide clear, professional documentation and responses as needed. \#LI-ST1 #LI-Onsite **About Legence** Legence (****************************** (Nasdaq: LGN) is a leading provider of engineering, consulting, installation, and maintenance services for mission-critical systems in buildings. The company specializes in designing, fabricating, and installing complex HVAC, process piping, and other mechanical, electrical, and plumbing (MEP) systems-enhancing energy efficiency, reliability, and sustainability in new and existing facilities. Legence also delivers long-term performance through strategic upgrades and holistic solutions. Serving some of the world's most technically demanding sectors, Legence counts over 60% of the Nasdaq-100 Index among its clients. **Benefits Overview** **Health & Welfare:** Company Paid medical, dental, vision, prescription drug, accident & sickness benefit, basic group life and AD&D, and Employee Assistance Program **Time Off Benefits:** Paid vacation, company-paid holidays, and paid sick leave **Financial Benefits:** 401(k) retirement savings plan **Reasonable Accommodations** If you need assistance or accommodations during the application or interview process, please contact us at ******************* or your dedicated recruiter with the job title and requisition number. **Third-Party Recruiting Disclaimer** Legence and its affiliates do not accept unsolicited resumes from agencies; any such submissions without a prior signed agreement authorized by Legence Holdings LLC's CHRO or Director of Talent Acquisition will not incur fees and are considered property of Legence. **Pay Disclosure & Considerations** Where pay ranges are indicated, please note that a successful candidate's exact pay will be determined based relevant job-related factors, including any of the following: candidate's experience, skills, and qualifications, as well as geographic and market considerations. We are committed to ensuring fair and competitive compensation for all employees and comply with all applicable salary transparency laws. **Equal Employment Opportunity Employer** Legence and its affiliate companies are proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), marital or familial status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, other non-merit-based factors, and any other characteristic protected under applicable local, state or federal laws and regulations. EEO is the Law **Job Details** **Pay Type** **Hourly**

I/E QC FOREMAN Must be able to test, calibrate, troubleshoot, overhaul and repair controlling, indicating and measuring instrument devices to ensure specified operating performance using hand tools, testing and calibrating instruments and equipment and precision measuring instruments. Ability to read and understand manuals, blueprint schematics and testing specifications. Must have some knowledge of electrical schematics and PLCs. Other duties may be assigned. Specific Duties and Responsibilities: Apply knowledge of mathematics to instrumentation, such as ratio and proportions, numbers with power of 10's, algebra equations, English-to-metric conversion, inches of water to PSI, inches of mercury to PSI, etc. Read blueprints, schematics and loop drawings and prepare job reports. Assemble and disassemble all types of electronic process controls, pneumatic controls and hydraulic systems and components. Calibrate equipment using common calibration procedures and be able to read, interpret, apply and know where to find other procedures. Understand the principles of pH and redox and equipment needed to measure them and be able to control the pH and redox of a liquid. Work with and understand Ohm's Law and Kerchoff's Law and with Diodes, capacitors and other electrical components. Understand steam and how it reacts to different situations, (e.g. saturation properties). Work with the principles of chemistry and physics required in instrumentation such as specific gravity, density of liquids and solids, mechanical advantages, proportions of liquids, melting points, freezing points, boiling points of liquids, etc. Troubleshoot and check out electrical, pneumatic, and hydraulic systems using proper test equipment. Understand fundamental instrumentation loops and how they function as a loop, and what the function of each component part is in each type of loop. Understand common types of chemical plant process equipment such as distillation columns, heat exchangers, boilers, turbines and compressors. Apply the procedures for measuring pressure level, flow, temperature, weight, density, heat flux, humidity and moisture, etc. Maintain current electrician's license or identification card to meet state regulations. Executes the specific inspections on materials, equipment and construction/installation activities on site. Issues the relevant Quality Records and, when necessary, writes and sends to QC Supervisor non-conformances reports. Checks cable laying and cable identification. Performs all relevant loop checks. Updates as built drawings. Performs punch-listing operations. Checks power transformers, switchboard, accumulator battery, sockets outlet, lighting system. Performs visual inspections, dimensional test, checks rating and material for connection. Performs tests of continuity, insulation resistance. Calibrates safety valves. Calibrates instruments. Checks installation of instruments. Performs tests functional instruments. Checks pneumatic signal connection. Checks fiber optic cable. Performs test communication functionalities. Verify special processes and the relevant workers' qualifications. Witness the tests, controls and inspections carried out. Check conformity with the Quality Control Plan, obtain the relevant documentation, check procedures and equipment to be used in tests, controls and inspections, manage documents certifying tests, controls and inspections. Ensure the correct implementation of the approved Inspection Test Plan. Qualifications Required for this Position: REQUIREMENTS Previous construction experience within the oil and gas industry Previous exposure to high voltage electrical installation including switchgear and electric drives. Exposure to Hazardous Area installations Instrument calibrations including ultrasonic flow meter, level transmitters, temperature transmitters, pressure transmitters etc. Minimum of 5 years' experience in a comparable role A working knowledge of BS/IEC/ISO/API/ATEX/EEMUA codes and standards relating to electrical and instrumentation work. Working knowledge of construction standards, codes of practice and regulations/legislation relating to electrical and instrumentation work. Knowledge of safety legislation and regulations Proficient in the use of Microsoft Office Package. Familiar with other computer packages (e.g. MS Project, Outlook, Win PCS, etc.) Hazardous Area installation and inspection experience is an advantage Ability to perform well under pressure Education - no minimum education requirements. Experience - 3-5 years of Journeyman level and QA/QC experience. Austin ("The Company") is an equal employment opportunity employer. The Company's policy prohibits discrimination against any applicant or employee based on race, color, sex, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. The Company also prohibits harassment of applicants or employees based on any of these protected categories. It is also the Company's policy to comply with all federal, state and local laws respecting consideration of unemployment status in making hiring decisions.

**I/E QC FOREMAN** Must be able to test, calibrate, troubleshoot, overhaul and repair controlling, indicating and measuring instrument devices to ensure specified operating performance using hand tools, testing and calibrating instruments and equipment and precision measuring instruments. Ability to read and understand manuals, blueprint schematics and testing specifications. Must have some knowledge of electrical schematics and PLCs. Other duties may be assigned. Specific Duties and Responsibilities: + Apply knowledge of mathematics to instrumentation, such as ratio and proportions, numbers with power of 10's, algebra equations, English-to-metric conversion, inches of water to PSI, inches of mercury to PSI, etc. + Read blueprints, schematics and loop drawings and prepare job reports. + Assemble and disassemble all types of electronic process controls, pneumatic controls and hydraulic systems and components. + Calibrate equipment using common calibration procedures and be able to read, interpret, apply and know where to find other procedures. + Understand the principles of pH and redox and equipment needed to measure them and be able to control the pH and redox of a liquid. + Work with and understand Ohm's Law and Kerchoff's Law and with Diodes, capacitors and other electrical components. + Understand steam and how it reacts to different situations, (e.g. saturation properties). + Work with the principles of chemistry and physics required in instrumentation such as specific gravity, density of liquids and solids, mechanical advantages, proportions of liquids, melting points, freezing points, boiling points of liquids, etc. + Troubleshoot and check out electrical, pneumatic, and hydraulic systems using proper test equipment. + Understand fundamental instrumentation loops and how they function as a loop, and what the function of each component part is in each type of loop. + Understand common types of chemical plant process equipment such as distillation columns, heat exchangers, boilers, turbines and compressors. + Apply the procedures for measuring pressure level, flow, temperature, weight, density, heat flux, humidity and moisture, etc. + Maintain current electrician's license or identification card to meet state regulations. + Executes the specific inspections on materials, equipment and construction/installation activities on site. + Issues the relevant Quality Records and, when necessary, writes and sends to QC Supervisor non-conformances reports. + Checks cable laying and cable identification. + Performs all relevant loop checks. + Updates as built drawings. + Performs punch-listing operations. + Checks power transformers, switchboard, accumulator battery, sockets outlet, lighting system. + Performs visual inspections, dimensional test, checks rating and material for connection. + Performs tests of continuity, insulation resistance. + Calibrates safety valves. + Calibrates instruments. + Checks installation of instruments. + Performs tests functional instruments. + Checks pneumatic signal connection. + Checks fiber optic cable. + Performs test communication functionalities. + Verify special processes and the relevant workers' qualifications. + Witness the tests, controls and inspections carried out. + Check conformity with the Quality Control Plan, obtain the relevant documentation, check procedures and equipment to be used in tests, controls and inspections, manage documents certifying tests, controls and inspections. + Ensure the correct implementation of the approved Inspection Test Plan. Qualifications Required for this Position: REQUIREMENTS + Previous construction experience within the oil and gas industry + Previous exposure to high voltage electrical installation including switchgear and electric drives. + Exposure to Hazardous Area installations Instrument calibrations including ultrasonic flow meter, level transmitters, temperature transmitters, pressure transmitters etc. + Minimum of 5 years' experience in a comparable role + A working knowledge of BS/IEC/ISO/API/ATEX/EEMUA codes and standards relating to electrical and instrumentation work. + Working knowledge of construction standards, codes of practice and regulations/legislation relating to electrical and instrumentation work. + Knowledge of safety legislation and regulations + Proficient in the use of Microsoft Office Package. + Familiar with other computer packages (e.g. MS Project, Outlook, Win PCS, etc.) + Hazardous Area installation and inspection experience is an advantage Ability to perform well under pressure **Education** - no minimum education requirements. **Experience** - 3-5 years of Journeyman level and QA/QC experience. Austin ("The Company") is an equal employment opportunity employer. The Company's policy prohibits discrimination against any applicant or employee based on race, color, sex, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. The Company also prohibits harassment of applicants or employees based on any of these protected categories. It is also the Company's policy to comply with all federal, state and local laws respecting consideration of unemployment status in making hiring decisions. **Qualifications** **Licenses & Certifications** **Required** + Valid Driver's License + TX Journeyman Electrician Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

Any Employment Offers are Contingent Upon Successful Completion of the Following: Verification of Work Authorization and Employment Eligibility Substance Abuse Screening Physical Exam (if applicable) Background Checks for Badging/Security Clearances (if applicable) About Hensel Phelps: Founded in 1937, Hensel Phelps specializes in building development, construction and facility services in markets ranging from aviation to government, commercial, transportation, critical facilities, healthcare and transportation. Ranked #1 in aviation and #6 overall general contractor in 2024 by BD+C, Hensel Phelps is one of the largest employee-owned general contractors in the country. Driven to deliver EXCELLENCE in all we do and supported by our core values of Ownership, Integrity, Builder, Diversity and Community, Hensel Phelps brings our clients' visions to life with a comprehensive approach that begins with innovative planning and extends throughout the life of the property. Position Descriptions: The Quality Control Engineer (QCE) is responsible for performing many of the quality control tasks at the project level as defined in the quality control plan for the project. The QC engineer exercises judgment and discretion in making quality control-related recommendations, implementing quality control policies and procedures, and handling a wide variety of quality control matters in the field and office. The QC engineer is typically assigned to a single project but may be required to support multiple smaller projects, when necessary. This is a safety sensitive position. Position Qualifications: A 4-year degree in civil or structural engineering, architecture, or construction management. Minimum of 1-2 years' experience on large commercial construction projects. A valid Driver's License. Strong communication skills (verbal and written). Computer software - Microsoft Office Suite, specifically Excel-based templates, Prolog, Primavera and AutoCAD. Proficiency with Microsoft Office applications (i.e., Excel, Word, PowerPoint, etc.). Must be able to manage multiple tasks and have excellent follow-up skills both internally and externally. Ability to work under pressure in a fast-paced, deadline-driven environment. Strong understanding of federal, state, and local reporting requirements and regulations. Essential Duties: Interface directly with the owner's quality assurance team on all quality-related issues. Be technically experienced and capable of comprehending the specifications, standards and code requirements for all disciplines. Participate in submittal reviews, weekly QC meetings and preparatory meetings. Perform all initial and follow-up inspections and manage the punch list process. Inspections are conducted to verify that trade partner work complies with the project specifications and applicable codes. This includes performing material inspections to verify that the products are to specifications and that storage, staging and material handling methods are implemented. Maintain records that identify areas inspected, tests performed and any significant findings. Initiate deficiency reports and track their resolution to the satisfaction of all stakeholders. Work closely with trade partner quality control personnel to understand their QC procedures. Review the trade partner's quality control logs and ensure corrective actions are implemented, when required. Assist with the coordination and scheduling of third-party testing and source inspections. Interface with third party testing agencies, as necessary. Physical Work Classification & Demands: Moderate Work. Exerting up to 50 pounds of force occasionally, and/or up to 25 pounds of force frequently, and/or 10 pounds of force constantly to move objects. • The individual in this position will periodically walk, kneel, sit, crouch, reach, stoop, read/see, speak, push, pull, lift, stand, and finger/type. The frequency of each action varies by workflow and office activity. • Walking - The person in this position needs to occasionally move about inside the office to access file cabinets, office machinery, boxes, cabinets, etc. • Constantly operates a computer and other office machinery, such as a calculator, copy machine, phone, computer, and computer printer. • The person in this position frequently communicates with employees and external stakeholders regarding a variety of topics related to office administration. • Constantly computes, analyzes, and conceptualizes mathematical calculations and formulas. • The person in this position regularly sits in a stationary position in front of a computer screen. • Constantly reads written communications and views mail submissions. Will also need to read blueprints and take/verify field measurements. • Climbing - Ascending or descending ladders, stairs, scaffolding and ramps at various heights. • Balancing - Ability to maintain body equilibrium to prevent falling and to walk, stand or crouch. • Stooping - Bending the body downward and forward by the spine at the waist. • Visual acuity and ability to operate a vehicle as certified and appropriate. • Occasionally exposed to high and low temperatures • Frequently exposed to noisy environments and outdoor elements such as precipitation and wind. Benefits: Hensel Phelps provides generous benefits for our salaried employees. This position is eligible for company paid medical insurance, life insurance, accidental death & dismemberment, long-term disability, 401(K) retirement plan, health savings account (HSA) (HSA not available in Hawaii), and our employee assistance program (EAP). It also is eligible for employee paid enrollment in vision and dental insurance. Hensel Phelps also believes in the importance of taking time to recharge. As a result, salaried employees are eligible for paid time off beginning upon hire. Salaried positions (project engineers and above) participate in an annual bonus plan, subject to company and employee performance. Salaried employees (this is all salaried employees) are also eligible for a company cell phone or cell phone allowance in accordance with company policy. Further, salaried employees (project engineers and above) also receive either a vehicle or vehicle allowance in accordance with Hensel Phelps' policies. Based on position location, a cost of living adjustment (COLA) may also be included (subject to periodic review and adjustment). Equal Opportunity and Affirmative Action Employer: Hensel Phelps is an equal opportunity employer. Hensel Phelps is committed to engaging in affirmative action to increase employment opportunities for protected veterans and individuals with disabilities. Hensel Phelps shall not discriminate against any employee or applicant for employment on the basis of race, color, religion, sex, age, national origin, sexual orientation, gender identity and expression, domestic partner status, pregnancy, disability, citizenship, genetic information, protected veteran status, or any other characteristic protected by federal, state, or local law. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c) #LI-MK1

Environmental Technician June 2022 Supervisor's Title: Food Safety Manager Reports to: Food Safety Manager Department: QA Exempt Status: Non-Exempt - Hourly Work Schedule: Shift Work The Environmental Technician is responsible for the accurate performance of gathering samples, performing periodic compliance inspections, and performing environmental related activities in accordance with Panhandle Products procedures and regulatory requirements. Essential Functions Collect all EMP (Environmental Monitoring Program) samples, both swabs and air, according to schedule and SOP. Collect ATP Environmental swabs and perform ATP testing per schedule. Prepare samples collected for shipment and create Sample Anaylsis Request Forms (SARFs). Review all PC (Preventative Control) records for product release (HTST charts, MD charts, etc.) Communicate needed corrections on PC records appropriately and document corrective action. Inspect facility after maintenance/construction (Food Safety Permit). Peform lighting (Lumens) testing as required. Peform air flow testing as required. Perform compressed air testing as required. Conduct glass/hard plastic inspections per schedule. Perform pre-operations inspections to ensure effectiveness of sanitation programs. Daily inventory of Food Safety Hold Level 1 product as needed. Interpret and report results to production and management as required. Responsible for ensuring the quality and accuracy of results obtained. Participate in lab proficiency programs as outlined and assigned by Lab Manager. Follow all Good Laboratory Practices and safety policies. Communicate with Food Safety Manager any issues with regards to testing completion. Actively participate in training program as assigned by Food Safety Manager. Conduct internal audits and inspections to monitor GMP and PRP compliance, sanitation effectiveness, hygiene zone compliance, pest control verifications, and/or Food Safety Plan (HACCP Plan) verifications. Perform equipment maintenance and cleaning as scheduled. Promotes and exhibits strong Food Safety and Quality practices. Promotes and exhibits sustainability practices. Promotes and exhibits strong housekeeping practices. Must report Safety, Food Safety, and Quality, Sustainability and Housekeeping problems to direct supervisor immediately. Perform any other relevant duties and responsibilities defined in company policies and procedures, applicable legislations, or the SQF code. Regular attendance is an essential function of this position. Schedule will include working weekends, holidays, and rotating shifts as assigned; some overtime may be required. Complies with all applicable food safety regulations and mandates (Safe Quality Foods, Food and Drug Admin, Pasteurized Milk Ordinance). Complies with all company food safety policies and procedures (including Good Manufacturing Practices). Responsible for providing food safety and quality feedback to appropriate manager. Perform other duties as assigned. Qualifications Minimum of 6 months of experience working in a microbiological laboratory. Prefer high school diploma or GED from accredited institution. Experience executing Pathogen Environmental Monitoring (PEM) program. Prefer experience in internal GMP/Food Safety Inspections. English skills must be proficient to understand, read, write, and speak. Fundamental knowledge of the proper use of all laboratory chemicals, good lab practices, and lab safety. Proven ability enter data into LIMS system or spreadsheet software. Punctual and regular attendance is required. Participate in proactive team efforts to achieve departmental and company goals. Ability to prioritize tasks, handle multiple projects simultaneously and delegate assignments to others. Strong organizational skills and attention to detail. Excellent written and verbal communication skills. Excellent analytical and problem-solving skills. English skills must be proficient to understand, read, write, and speak. Comply with all safety policies, practices, and procedures. Report all unsafe activity to supervisor and/or Human Resources. Physical Requirements and Environmental Conditions Physical Requirements: Physical effort is regularly required. Frequently involves moderate walking and periods of standing. Ascending or descending ramps, stairs, ladders and/or scaffolding. Frequently involves crouching, stooping, kneeling and/or climbing or balancing. Frequently involves lifting more than 50 lbs. Typical Environmental Conditions: Works in a food processing manufacturing facility with moderate noise. May be exposed to moderate to high noise levels (i.e., production equipment, forklifts, heavy traffic). May be exposed to humidity, intense heat and cold, outdoor weather conditions, and fumes and toxic chemicals. May work in areas with mechanical moving parts, above ground with risk of fall, or areas with risk of electrical shock. May be exposed to ingredients that may cause allergic reactions and may be exposed to various allergen ingredients

Monitors plant operations of compliance with regulatory and company requirements in the Harvest Dept. QA will be responsible for paperwork he/she is assigned. Tech will monitor area from pre-wash up until gut table. They will assure that tags are in place where is needed (black, red, yellow tags). At each break, they will change out SRM sterilizers and make sure that any contact area is cleaned at each break. Tech will also check equipment after each break. Acts as liaison to USDA regulators. Responsibilities Duties include but are not limited to: Performing environmental sampling of equipment, drains, and raw and finished products. Calibration of thermometers and scales on a daily basis. Monitor sanitation standard operating procedures and document SSOP's in accordance with the companies program. Monitoring and documenting the quality of packaging, raw materials, and finished products. Monitoring foreign material detection and rejection. Monitoring and recording weights of finished products. Taking raw and finished product temperatures. Monitor physical, chemical, and sensory characteristics of raw and finished products. Generating and completing the required records and documentation on a daily basis for each product line in accordance to the customer's specifications. Perform HACCP monitoring and verification for all critical control points of the company's HACCP programs. Working alongside USDA and production employees. Monitor and ensure food security and safety. Qualifications H.S. diploma Good Work History - Beef industry experience a must - QA in food processing a plus Be able to possess basic math and computer skills, and be able to read and analyze process charts, graphs, and logs. Must possess good analytical and logical problem-solving skills. Must be HACCP certified, or be able to become HACCP certified. Must have excellent oral and written skills at a technical and general level. Knowledgeable with USDA inspected facilities.

Any Employment Offers are Contingent Upon Successful Completion of the Following: * Verification of Work Authorization and Employment Eligibility * Substance Abuse Screening * Physical Exam (if applicable) * Background Checks for Badging/Security Clearances (if applicable) About Hensel Phelps: Founded in 1937, Hensel Phelps specializes in building development, construction and facility services in markets ranging from aviation to government, commercial, transportation, critical facilities, healthcare and transportation. Ranked #1 in aviation and #6 overall general contractor in 2024 by BD+C, Hensel Phelps is one of the largest employee-owned general contractors in the country. Driven to deliver EXCELLENCE in all we do and supported by our core values of Ownership, Integrity, Builder, Diversity and Community, Hensel Phelps brings our clients' visions to life with a comprehensive approach that begins with innovative planning and extends throughout the life of the property. Position Descriptions: The Quality Control Engineer (QCE) is responsible for performing many of the quality control tasks at the project level as defined in the quality control plan for the project. The QC engineer exercises judgment and discretion in making quality control-related recommendations, implementing quality control policies and procedures, and handling a wide variety of quality control matters in the field and office. The QC engineer is typically assigned to a single project but may be required to support multiple smaller projects, when necessary. This is a safety sensitive position. Position Qualifications: * A 4-year degree in civil or structural engineering, architecture, or construction management. * Minimum of 1-2 years' experience on large commercial construction projects. * A valid Driver's License. * Strong communication skills (verbal and written). * Computer software - Microsoft Office Suite, specifically Excel-based templates, Prolog, Primavera and AutoCAD. * Proficiency with Microsoft Office applications (i.e., Excel, Word, PowerPoint, etc.). * Must be able to manage multiple tasks and have excellent follow-up skills both internally and externally. * Ability to work under pressure in a fast-paced, deadline-driven environment. * Strong understanding of federal, state, and local reporting requirements and regulations. Essential Duties: * Interface directly with the owner's quality assurance team on all quality-related issues. * Be technically experienced and capable of comprehending the specifications, standards and code requirements for all disciplines. * Participate in submittal reviews, weekly QC meetings and preparatory meetings. * Perform all initial and follow-up inspections and manage the punch list process. Inspections are conducted to verify that trade partner work complies with the project specifications and applicable codes. This includes performing material inspections to verify that the products are to specifications and that storage, staging and material handling methods are implemented. * Maintain records that identify areas inspected, tests performed and any significant findings. Initiate deficiency reports and track their resolution to the satisfaction of all stakeholders. * Work closely with trade partner quality control personnel to understand their QC procedures. Review the trade partner's quality control logs and ensure corrective actions are implemented, when required. * Assist with the coordination and scheduling of third-party testing and source inspections. Interface with third party testing agencies, as necessary. Physical Work Classification & Demands: Moderate Work. Exerting up to 50 pounds of force occasionally, and/or up to 25 pounds of force frequently, and/or 10 pounds of force constantly to move objects. * The individual in this position will periodically walk, kneel, sit, crouch, reach, stoop, read/see, speak, push, pull, lift, stand, and finger/type. The frequency of each action varies by workflow and office activity. * Walking - The person in this position needs to occasionally move about inside the office to access file cabinets, office machinery, boxes, cabinets, etc. * Constantly operates a computer and other office machinery, such as a calculator, copy machine, phone, computer, and computer printer. * The person in this position frequently communicates with employees and external stakeholders regarding a variety of topics related to office administration. * Constantly computes, analyzes, and conceptualizes mathematical calculations and formulas. * The person in this position regularly sits in a stationary position in front of a computer screen. * Constantly reads written communications and views mail submissions. Will also need to read blueprints and take/verify field measurements. * Climbing - Ascending or descending ladders, stairs, scaffolding and ramps at various heights. * Balancing - Ability to maintain body equilibrium to prevent falling and to walk, stand or crouch. * Stooping - Bending the body downward and forward by the spine at the waist. * Visual acuity and ability to operate a vehicle as certified and appropriate. * Occasionally exposed to high and low temperatures * Frequently exposed to noisy environments and outdoor elements such as precipitation and wind. Benefits: Hensel Phelps provides generous benefits for our salaried employees. This position is eligible for company paid medical insurance, life insurance, accidental death & dismemberment, long-term disability, 401(K) retirement plan, health savings account (HSA) (HSA not available in Hawaii), and our employee assistance program (EAP). It also is eligible for employee paid enrollment in vision and dental insurance. Hensel Phelps also believes in the importance of taking time to recharge. As a result, salaried employees are eligible for paid time off beginning upon hire. Salaried positions (project engineers and above) participate in an annual bonus plan, subject to company and employee performance. Salaried employees (this is all salaried employees) are also eligible for a company cell phone or cell phone allowance in accordance with company policy. Further, salaried employees (project engineers and above) also receive either a vehicle or vehicle allowance in accordance with Hensel Phelps' policies. Based on position location, a cost of living adjustment (COLA) may also be included (subject to periodic review and adjustment). Equal Opportunity and Affirmative Action Employer: Hensel Phelps is an equal opportunity employer. Hensel Phelps is committed to engaging in affirmative action to increase employment opportunities for protected veterans and individuals with disabilities. Hensel Phelps shall not discriminate against any employee or applicant for employment on the basis of race, color, religion, sex, age, national origin, sexual orientation, gender identity and expression, domestic partner status, pregnancy, disability, citizenship, genetic information, protected veteran status, or any other characteristic protected by federal, state, or local law. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c) #LI-MK1

Job Title: Special Mechanical Inspector (SMI) Craft Supervisor Career Level From: Supervisor Career Level To: Supervisor Job Specialty: Maintenance Planning What You'll Do Directly supervise and coordinate activities of bargaining maintenance technicians Must complete Pre-Job Briefings for all self-performed work Manager personnel and equipment resources for work Review and approve time records for direct reports Required to provide management and oversight of maintenance activities for the organization Must be able to effectively and efficiently communicate verbally and in written form Specific tasks include management and oversight of: Union craft pool Schedule and assign jobs, working with planning and scheduling departments Ensure the safe execution of work in the crafts group while meeting work schedules, quality standartds, and adherence to department budget Extensive knowledge of fall protection and general Personal Protective Equipment (PPE) Waste removal and tracking Provide technical guidance to the site, and resolve critical site issues Knowledge of hazards associated with electrical work Familiar with electrical theory and operation Other duties as assigned by supervisor Minimum Job Requirements Bachelor's degree with a minimum of five years of relevant experience Applicants with a high school diploma or equivalent may be considered on an exceptional basis with 13 or more years of relevant experience Department of Energy (DOE) Order 426.2A Requirements In addition to the above requirements, the applicant must also meet the requirements of DOE O 426.2A ((i.e., High School diploma and 3 years nuclear experience, or a DOE O 426.2 alternative)). DOE O 426.2A experience requirements can be satisfied following employment. In the interim, newly hired personnel will not be assigned duties that could impact the safety basis of nuclear facilities. (Ref. DOE O 426.2A) Preferred Job Requirements Executing corrective, predictive and preventive maintenance associated with Pantex Facilities Working effectively with other team members Completing written record of work performed #JointheMission: Your Impact Starts Here At Pantex, you won't just find a job-you'll discover a career of purpose safeguarding national security through work performed nowhere else on Earth. We empower dedicated, innovative individuals like you to achieve their greatest impact surrounded by exceptional talent and limitless opportunities for professional growth. When you #JointheMission, you choose a lifetime career where your commitment is genuinely valued and rewarded. At Pantex, we believe that extraordinary talent thrives when supported by a balanced life. Discover the flexibility that empowers you to excel, coupled with a benefits package designed for your total peace of mind from comprehensive health coverage and robust retirement planning, to opportunities for continuous learning through education reimbursement. Notes The minimum education and experience for the lowest career level in the job posting range are listed under Minimum Job Requirements. Successful candidates hired into a higher career level than the minimum in the range must meet the requirements listed in the job leveling charts for the career level into which they are being hired. If a range of Career Levels is posted, i.e., Senior Associate to Senior Specialist, internal applicants already in one of the Career Levels would come across at their current Career Level. Internal applicants currently in a lower level Career Level would move to the lowest posted Career Level. Requires a Q clearance; however all qualified candidates will be considered regardless of their current clearance status. The ability to obtain and maintain a Department of Energy Q clearance is required. Position may require entry into Materials Access Areas (MAA) and participation in the Human Reliability Program (HRP). If HRP is required, candidate must complete a counterintelligence-scope polygraph, pursuant to 10 CFR 709. Medical requirements may apply. Pantex is a drug-free workplace. Candidates accepting a job offer will be required to pass a pre-placement physical, drug screening and background investigation. As an employee, you may be required to receive and maintain a security clearance from the United States Department of Energy in order to meet eligibility requirements for access to sensitive information or matter. U.S. citizenship is a requirement for security clearance applicants. All employees are subject to being randomly selected for drug testing without advance notification. Pantex is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, age, religion, national origin, ancestry, genetic information, disability or veteran status.

Job Title: Special Mechanical Inspector (SMI) Craft Supervisor Career Level From: Supervisor Career Level To: Supervisor Job Specialty: Maintenance Planning What You'll Do * Directly supervise and coordinate activities of bargaining maintenance technicians * Must complete Pre-Job Briefings for all self-performed work * Manager personnel and equipment resources for work * Review and approve time records for direct reports * Required to provide management and oversight of maintenance activities for the organization * Must be able to effectively and efficiently communicate verbally and in written form * Specific tasks include management and oversight of: * Union craft pool * Schedule and assign jobs, working with planning and scheduling departments * Ensure the safe execution of work in the crafts group while meeting work schedules, quality standartds, and adherence to department budget * Extensive knowledge of fall protection and general Personal Protective Equipment (PPE) * Waste removal and tracking * Provide technical guidance to the site, and resolve critical site issues * Knowledge of hazards associated with electrical work * Familiar with electrical theory and operation * Other duties as assigned by supervisor Minimum Job Requirements * Bachelor's degree with a minimum of five years of relevant experience * Applicants with a high school diploma or equivalent may be considered on an exceptional basis with 13 or more years of relevant experience Department of Energy (DOE) Order 426.2A Requirements In addition to the above requirements, the applicant must also meet the requirements of DOE O 426.2A ((i.e., High School diploma and 3 years nuclear experience, or a DOE O 426.2 alternative)). DOE O 426.2A experience requirements can be satisfied following employment. In the interim, newly hired personnel will not be assigned duties that could impact the safety basis of nuclear facilities. (Ref. DOE O 426.2A) Preferred Job Requirements * Executing corrective, predictive and preventive maintenance associated with Pantex Facilities * Working effectively with other team members * Completing written record of work performed #JointheMission: Your Impact Starts Here At Pantex, you won't just find a job-you'll discover a career of purpose safeguarding national security through work performed nowhere else on Earth. We empower dedicated, innovative individuals like you to achieve their greatest impact surrounded by exceptional talent and limitless opportunities for professional growth. When you #JointheMission, you choose a lifetime career where your commitment is genuinely valued and rewarded. At Pantex, we believe that extraordinary talent thrives when supported by a balanced life. Discover the flexibility that empowers you to excel, coupled with a benefits package designed for your total peace of mind from comprehensive health coverage and robust retirement planning, to opportunities for continuous learning through education reimbursement. Notes The minimum education and experience for the lowest career level in the job posting range are listed under Minimum Job Requirements. Successful candidates hired into a higher career level than the minimum in the range must meet the requirements listed in the job leveling charts for the career level into which they are being hired. If a range of Career Levels is posted, i.e., Senior Associate to Senior Specialist, internal applicants already in one of the Career Levels would come across at their current Career Level. Internal applicants currently in a lower level Career Level would move to the lowest posted Career Level. Requires a Q clearance; however all qualified candidates will be considered regardless of their current clearance status. The ability to obtain and maintain a Department of Energy Q clearance is required. Position may require entry into Materials Access Areas (MAA) and participation in the Human Reliability Program (HRP). If HRP is required, candidate must complete a counterintelligence-scope polygraph, pursuant to 10 CFR 709. Medical requirements may apply. Pantex is a drug-free workplace. Candidates accepting a job offer will be required to pass a pre-placement physical, drug screening and background investigation. As an employee, you may be required to receive and maintain a security clearance from the United States Department of Energy in order to meet eligibility requirements for access to sensitive information or matter. U.S. citizenship is a requirement for security clearance applicants. All employees are subject to being randomly selected for drug testing without advance notification. Pantex is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, age, religion, national origin, ancestry, genetic information, disability or veteran status.

**Any Employment Offers are Contingent Upon Successful Completion of the Following:** + Verification of Work Authorization and Employment Eligibility + Substance Abuse Screening + Physical Exam (if applicable) + Background Checks for Badging/Security Clearances (if applicable) **About Hensel Phelps:** Founded in 1937, Hensel Phelps specializes in building development, construction and facility services in markets ranging from aviation to government, commercial, transportation, critical facilities, healthcare and transportation. Ranked #1 in aviation and #6 overall general contractor in 2024 by BD+C, Hensel Phelps is one of the largest employee-owned general contractors in the country. Driven to deliver EXCELLENCE in all we do and supported by our core values of Ownership, Integrity, Builder, Diversity and Community, Hensel Phelps brings our clients' visions to life with a comprehensive approach that begins with innovative planning and extends throughout the life of the property. **Position Descriptions:** The Quality Control Engineer (QCE) is responsible for performing many of the quality control tasks at the project level as defined in the quality control plan for the project. The QC engineer exercises judgment and discretion in making quality control-related recommendations, implementing quality control policies and procedures, and handling a wide variety of quality control matters in the field and office. The QC engineer is typically assigned to a single project but may be required to support multiple smaller projects, when necessary. This is a safety sensitive position. **Position Qualifications:** + A 4-year degree in civil or structural engineering, architecture, or construction management. + Minimum of 1-2 years' experience on large commercial construction projects. + A valid Driver's License. + Strong communication skills (verbal and written). + Computer software - Microsoft Office Suite, specifically Excel-based templates, Prolog, Primavera and AutoCAD. + Proficiency with Microsoft Office applications (i.e., Excel, Word, PowerPoint, etc.). + Must be able to manage multiple tasks and have excellent follow-up skills both internally and externally. + Ability to work under pressure in a fast-paced, deadline-driven environment. + Strong understanding of federal, state, and local reporting requirements and regulations. **Essential Duties:** + Interface directly with the owner's quality assurance team on all quality-related issues. + Be technically experienced and capable of comprehending the specifications, standards and code requirements for all disciplines. + Participate in submittal reviews, weekly QC meetings and preparatory meetings. + Perform all initial and follow-up inspections and manage the punch list process. Inspections are conducted to verify that trade partner work complies with the project specifications and applicable codes. This includes performing material inspections to verify that the products are to specifications and that storage, staging and material handling methods are implemented. + Maintain records that identify areas inspected, tests performed and any significant findings. Initiate deficiency reports and track their resolution to the satisfaction of all stakeholders. + Work closely with trade partner quality control personnel to understand their QC procedures. Review the trade partner's quality control logs and ensure corrective actions are implemented, when required. + Assist with the coordination and scheduling of third-party testing and source inspections. Interface with third party testing agencies, as necessary. **Physical Work Classification & Demands:** Moderate Work. Exerting up to 50 pounds of force occasionally, and/or up to 25 pounds of force frequently, and/or 10 pounds of force constantly to move objects. - The individual in this position will periodically walk, kneel, sit, crouch, reach, stoop, read/see, speak, push, pull, lift, stand, and finger/type. The frequency of each action varies by workflow and office activity. - Walking - The person in this position needs to occasionally move about inside the office to access file cabinets, office machinery, boxes, cabinets, etc. - Constantly operates a computer and other office machinery, such as a calculator, copy machine, phone, computer, and computer printer. - The person in this position frequently communicates with employees and external stakeholders regarding a variety of topics related to office administration. - Constantly computes, analyzes, and conceptualizes mathematical calculations and formulas. - The person in this position regularly sits in a stationary position in front of a computer screen. - Constantly reads written communications and views mail submissions. Will also need to read blueprints and take/verify field measurements. - Climbing - Ascending or descending ladders, stairs, scaffolding and ramps at various heights. - Balancing - Ability to maintain body equilibrium to prevent falling and to walk, stand or crouch. - Stooping - Bending the body downward and forward by the spine at the waist. - Visual acuity and ability to operate a vehicle as certified and appropriate. - Occasionally exposed to high and low temperatures - Frequently exposed to noisy environments and outdoor elements such as precipitation and wind. **Benefits:** Hensel Phelps provides generous benefits for our salaried employees. This position is eligible for company paid medical insurance, life insurance, accidental death & dismemberment, long-term disability, 401(K) retirement plan, health savings account (HSA) (HSA not available in Hawaii), and our employee assistance program (EAP). It also is eligible for employee paid enrollment in vision and dental insurance. Hensel Phelps also believes in the importance of taking time to recharge. As a result, salaried employees are eligible for paid time off beginning upon hire. Salaried positions (project engineers and above) participate in an annual bonus plan, subject to company and employee performance. Salaried employees (this is all salaried employees) are also eligible for a company cell phone or cell phone allowance in accordance with company policy. Further, salaried employees (project engineers and above) also receive either a vehicle or vehicle allowance in accordance with Hensel Phelps' policies. Based on position location, a cost of living adjustment (COLA) may also be included (subject to periodic review and adjustment). **Equal Opportunity and Affirmative Action Employer:** Hensel Phelps is an equal opportunity employer. Hensel Phelps is committed to engaging in affirmative action to increase employment opportunities for protected veterans and individuals with disabilities. Hensel Phelps shall not discriminate against any employee or applicant for employment on the basis of race, color, religion, sex, age, national origin, sexual orientation, gender identity and expression, domestic partner status, pregnancy, disability, citizenship, genetic information, protected veteran status, or any other characteristic protected by federal, state, or local law. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c) \#LI-MK1 Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

**Yearout Mechanical, a Legence company** Yearout Mechanical (********************* is a New Mexico based company specializing in the installation of mechanical and process systems for the commercial, government, manufacturing and industrial communities of New Mexico and Texas. Since our incorporation in August of 1964, Yearout Mechanical has consistently grown and expanded its capabilities, reaching its present position as the premier mechanical contractor in New Mexico. Our mission is to be invaluable to our partners (clients, vendors, industry, and employees) so they cannot imagine success without us, by providing comfortable, reliable and efficient mechanical systems that meet our partners' needs. **Quality Control Specialist - Yearout Mechanical** As a Quality Control Representative at Yearout Mechanical, you'll play a hands-on role in ensuring fabrication and installation quality for HVAC, plumbing, and process/utility systems across New Mexico and Texas. You will perform inspections, maintain documentation, and collaborate closely with Fabrication, Field, and BIM/VDC teams so every deliverable meets first-pass quality expectations through startup and turnover. **What You'll Do** **Perform inspections & tests** + Execute planned inspections and tests (ITPs/hold points) from material receiving through fit-up, supports/hangers, cleanliness/flush checks, pressure/leak testing, insulation/labeling, startup, and turnover. + Conduct field and shop walkdowns, dimensional checks, and system verification activities. **Apply codes & standards** + Use IMC/IPC, SMACNA, and applicable AWS/ASME elements (e.g., B31/Section IX) as required by project scope. + Follow established procedures and support updates to quality documents as needed. **Documentation & traceability** + Maintain quality records, including RFIs, submittals, test reports, redlines/as-builts, and inspection logs. + Ensure material and component traceability from model to shop to field. + Support preparation of QA/QC turnover packages. **NCR/CAPA support** + Identify nonconformances, document NCRs, and participate in root cause and corrective/preventive action activities. + Track and update status in quality databases and support timely closure. **Collaboration across teams** + Coordinate daily with Fabrication, Field, and BIM/VDC teams on spool releases, weld/bolt logs, checklists, and handoffs. + Communicate clearly with project teams to keep quality gates and schedules aligned. **Partner & inspector interface** + Support interactions with clients, vendors, GCs, third-party inspectors, and AHJs during inspections or audits. + Provide clear, professional documentation and responses as needed. \#LI-ST1 #LI-Onsite **About Legence** Legence (****************************** (Nasdaq: LGN) is a leading provider of engineering, consulting, installation, and maintenance services for mission-critical systems in buildings. The company specializes in designing, fabricating, and installing complex HVAC, process piping, and other mechanical, electrical, and plumbing (MEP) systems-enhancing energy efficiency, reliability, and sustainability in new and existing facilities. Legence also delivers long-term performance through strategic upgrades and holistic solutions. Serving some of the world's most technically demanding sectors, Legence counts over 60% of the Nasdaq-100 Index among its clients. **Benefits Overview** **Health & Welfare:** Company Paid medical, dental, vision, prescription drug, accident & sickness benefit, basic group life and AD&D, and Employee Assistance Program **Time Off Benefits:** Paid vacation, company-paid holidays, and paid sick leave **Financial Benefits:** 401(k) retirement savings plan **Reasonable Accommodations** If you need assistance or accommodations during the application or interview process, please contact us at ******************* or your dedicated recruiter with the job title and requisition number. **Third-Party Recruiting Disclaimer** Legence and its affiliates do not accept unsolicited resumes from agencies; any such submissions without a prior signed agreement authorized by Legence Holdings LLC's CHRO or Director of Talent Acquisition will not incur fees and are considered property of Legence. **Pay Disclosure & Considerations** Where pay ranges are indicated, please note that a successful candidate's exact pay will be determined based relevant job-related factors, including any of the following: candidate's experience, skills, and qualifications, as well as geographic and market considerations. We are committed to ensuring fair and competitive compensation for all employees and comply with all applicable salary transparency laws. **Equal Employment Opportunity Employer** Legence and its affiliate companies are proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), marital or familial status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, other non-merit-based factors, and any other characteristic protected under applicable local, state or federal laws and regulations. EEO is the Law **Job Details** **Pay Type** **Hourly**

Job DescriptionApply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: To verify property occupancy. To report on the general condition of the property using a mobile application. Most inspections are exterior only. About 10% require interior photos after the property has gone vacant. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities Most common type of inspection should only take 5-6 minutes. Complete the inspection within 4 days after it is assigned. Report general property conditions and make a determination of occupancy based on industry standards. Take 9+ photos of the property with brief comments. Complete a short form in an app. Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory. Requirements (to be considered you must have the following): Computer with an internet connection Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas) Smartphone (Android or iPhone) Printer Pass a standard background check using a valid driver's license Pay and Hours This is a 1099 position. Each inspection has a flat rate. Rates vary based on county and volume. Although you are paid per inspection, you will earn the equivalent of $30-$40 per hour. Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only Powered by JazzHR BDhi98SGyW

**Yearout Mechanical, a Legence company** Yearout Mechanical (********************* is a New Mexico based company specializing in the installation of mechanical and process systems for the commercial, government, manufacturing and industrial communities of New Mexico and Texas. Since our incorporation in August of 1964, Yearout Mechanical has consistently grown and expanded its capabilities, reaching its present position as the premier mechanical contractor in New Mexico. Our mission is to be invaluable to our partners (clients, vendors, industry, and employees) so they cannot imagine success without us, by providing comfortable, reliable and efficient mechanical systems that meet our partners' needs. **Quality Control Specialist - Yearout Mechanical** As a Quality Control Representative at Yearout Mechanical, you'll play a hands-on role in ensuring fabrication and installation quality for HVAC, plumbing, and process/utility systems across New Mexico and Texas. You will perform inspections, maintain documentation, and collaborate closely with Fabrication, Field, and BIM/VDC teams so every deliverable meets first-pass quality expectations through startup and turnover. **What You'll Do** **Perform inspections & tests** + Execute planned inspections and tests (ITPs/hold points) from material receiving through fit-up, supports/hangers, cleanliness/flush checks, pressure/leak testing, insulation/labeling, startup, and turnover. + Conduct field and shop walkdowns, dimensional checks, and system verification activities. **Apply codes & standards** + Use IMC/IPC, SMACNA, and applicable AWS/ASME elements (e.g., B31/Section IX) as required by project scope. + Follow established procedures and support updates to quality documents as needed. **Documentation & traceability** + Maintain quality records, including RFIs, submittals, test reports, redlines/as-builts, and inspection logs. + Ensure material and component traceability from model to shop to field. + Support preparation of QA/QC turnover packages. **NCR/CAPA support** + Identify nonconformances, document NCRs, and participate in root cause and corrective/preventive action activities. + Track and update status in quality databases and support timely closure. **Collaboration across teams** + Coordinate daily with Fabrication, Field, and BIM/VDC teams on spool releases, weld/bolt logs, checklists, and handoffs. + Communicate clearly with project teams to keep quality gates and schedules aligned. **Partner & inspector interface** + Support interactions with clients, vendors, GCs, third-party inspectors, and AHJs during inspections or audits. + Provide clear, professional documentation and responses as needed. \#LI-ST1 #LI-Onsite **About Legence** Legence (****************************** (Nasdaq: LGN) is a leading provider of engineering, consulting, installation, and maintenance services for mission-critical systems in buildings. The company specializes in designing, fabricating, and installing complex HVAC, process piping, and other mechanical, electrical, and plumbing (MEP) systems-enhancing energy efficiency, reliability, and sustainability in new and existing facilities. Legence also delivers long-term performance through strategic upgrades and holistic solutions. Serving some of the world's most technically demanding sectors, Legence counts over 60% of the Nasdaq-100 Index among its clients. **Benefits Overview** **Health & Welfare:** Company Paid medical, dental, vision, prescription drug, accident & sickness benefit, basic group life and AD&D, and Employee Assistance Program **Time Off Benefits:** Paid vacation, company-paid holidays, and paid sick leave **Financial Benefits:** 401(k) retirement savings plan **Reasonable Accommodations** If you need assistance or accommodations during the application or interview process, please contact us at ******************* or your dedicated recruiter with the job title and requisition number. **Third-Party Recruiting Disclaimer** Legence and its affiliates do not accept unsolicited resumes from agencies; any such submissions without a prior signed agreement authorized by Legence Holdings LLC's CHRO or Director of Talent Acquisition will not incur fees and are considered property of Legence. **Pay Disclosure & Considerations** Where pay ranges are indicated, please note that a successful candidate's exact pay will be determined based relevant job-related factors, including any of the following: candidate's experience, skills, and qualifications, as well as geographic and market considerations. We are committed to ensuring fair and competitive compensation for all employees and comply with all applicable salary transparency laws. **Equal Employment Opportunity Employer** Legence and its affiliate companies are proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), marital or familial status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, other non-merit-based factors, and any other characteristic protected under applicable local, state or federal laws and regulations. EEO is the Law **Job Details** **Pay Type** **Hourly**