Quality control inspector jobs in Longview, TX - 2,161 jobs

Who We Are: Delta, founded in 1971, is a global provider of power and thermal management solutions. Its mission statement, "To provide innovative, clean and energy-efficient solutions for a better tomorrow," focuses on addressing key environmental issues such as global climate change. As an energy-saving solutions provider with core competencies in power electronics and automation, Delta's business categories include Power Electronics, Mobility, Automation, and Infrastructure. Delta, founded in 1971, is a global provider of power and thermal management solutions. Its mission statement, "To provide innovative, clean and energy-efficient solutions for a better tomorrow," focuses on addressing key environmental issues such as global climate change. As an energy-saving solutions provider with core competencies in power electronics and automation, Delta's business categories include Power Electronics, Mobility, Automation, and Infrastructure. Delta, founded in 1971, is a global provider of power and thermal management solutions. Its mission statement, "To provide innovative, clean and energy-efficient solutions for a better tomorrow," focuses on addressing key environmental issues such as global climate change. As an energy-saving solutions provider with core competencies in power electronics and automation, Delta's business categories include Power Electronics, Mobility, Automation, and Infrastructure. About the role: The Quality Control Inspector is responsible for inspecting sheet metal parts, welded assemblies, and finished products to ensure compliance with engineering drawings, welding standards, and customer requirements. This role supports the manufacturing team by identifying nonconformities, ensuring corrective actions, and maintaining product quality throughout fabrication and welding processes. Key responsibilities: Perform dimensional inspections of sheet metal components using calipers, micrometers, height gauges, and other precision measurement tools. Conduct visual and dimensional weld inspections per AWS D1.1, ISO, or equivalent welding standards. Verify weld quality, including size, length, penetration, porosity, cracks, undercut, and overall workmanship. Review and interpret engineering drawings, specifications, and weld symbols to ensure product conformity. Perform in-process inspections during sheet metal fabrication (cutting, bending, stamping, drilling, assembly, etc.). Inspect surface finishes, powder coating/painting, and other secondary processes Document inspection results, prepare quality reports, and maintain records. Support root cause analysis and corrective/preventive actions (CAPA) Collaborate with production and engineering teams to resolve quality issues. Ensure inspection tools and gauges are calibrated and properly maintained. Follow all company safety, ISO 9001, and quality system procedures. Minium Qualifications: High school diploma or technical certification required, associate degree in a technical field preferred. 2+ years of experience in quality inspection within a sheet metal fabrication or welding environment. Experience with precision measurement tools (calipers, micrometers, height gauges, CMM experience a plus). Strong attention to detail and ability to work independently. Good communication and documentation skills. Preferred Qualifications: Strong knowledge of welding processes (MIG, TIG, spot welding) and common weld defects. Ability to read and interpret engineering drawings, GD&T, and weld symbols. Familiarity with AWS D1.1 or similar welding standards; welding inspection certification (CWI, WI) preferred. Understanding of ISO 9001 quality systems; IATF knowledge a plus. Benefit at Delta Electronics Americas: Life at Delta EEO Statement: Delta Electronics Americas is an Equal Opportunity Employer and is committed to compliance with all applicable federal, state, and local laws. Delta Electronics America is committed to fostering a diverse, inclusive, and respectful workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, age, marital status, national origin, disability, veteran status, or any other protected characteristic. The base salary range for this full-time position is 45k-55k per year. Actual pay will depend on factors such as location, skills, experience, market conditions, and business needs. This role may also be eligible for incentive pay, subject to the terms of the applicable plan. Eligible employees receive company-provided benefits in accordance with plan terms and eligibility requirements. Benefits include health coverage, wellness resources, retirement savings plan, paid time off, and other company‑sponsored programs; parental leave is provided in accordance with applicable law. About the role: The Quality Control Inspector is responsible for inspecting sheet metal parts, welded assemblies, and finished products to ensure compliance with engineering drawings, welding standards, and customer requirements. This role supports the manufacturing team by identifying nonconformities, ensuring corrective actions, and maintaining product quality throughout fabrication and welding processes. Key responsibilities: Perform dimensional inspections of sheet metal components using calipers, micrometers, height gauges, and other precision measurement tools. Conduct visual and dimensional weld inspections per AWS D1.1, ISO, or equivalent welding standards. Verify weld quality, including size, length, penetration, porosity, cracks, undercut, and overall workmanship. Review and interpret engineering drawings, specifications, and weld symbols to ensure product conformity. Perform in-process inspections during sheet metal fabrication (cutting, bending, stamping, drilling, assembly, etc.). Inspect surface finishes, powder coating/painting, and other secondary processes Document inspection results, prepare quality reports, and maintain records. Support root cause analysis and corrective/preventive actions (CAPA) Collaborate with production and engineering teams to resolve quality issues. Ensure inspection tools and gauges are calibrated and properly maintained. Follow all company safety, ISO 9001, and quality system procedures. Minium Qualifications: High school diploma or technical certification required, associate degree in a technical field preferred. 2+ years of experience in quality inspection within a sheet metal fabrication or welding environment. Experience with precision measurement tools (calipers, micrometers, height gauges, CMM experience a plus). Strong attention to detail and ability to work independently. Good communication and documentation skills. Preferred Qualifications: Strong knowledge of welding processes (MIG, TIG, spot welding) and common weld defects. Ability to read and interpret engineering drawings, GD&T, and weld symbols. Familiarity with AWS D1.1 or similar welding standards; welding inspection certification (CWI, WI) preferred. Understanding of ISO 9001 quality systems; IATF knowledge a plus. Benefit at Delta Electronics Americas: Life at Delta EEO Statement: Delta Electronics Americas is an Equal Opportunity Employer and is committed to compliance with all applicable federal, state, and local laws. Delta Electronics America is committed to fostering a diverse, inclusive, and respectful workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, age, marital status, national origin, disability, veteran status, or any other protected characteristic. The base salary range for this full-time position is 45k-55k per year. Actual pay will depend on factors such as location, skills, experience, market conditions, and business needs. This role may also be eligible for incentive pay, subject to the terms of the applicable plan. Eligible employees receive company-provided benefits in accordance with plan terms and eligibility requirements. Benefits include health coverage, wellness resources, retirement savings plan, paid time off, and other company‑sponsored programs; parental leave is provided in accordance with applicable law.

Fabricate, repair, and maintain various tools, dies, and fixtures used in the manufacturing process Interpret engineering drawings, blueprints, and specifications to create precise tooling components Operate manual machining equipment, such as lathes, milling machines, and grinders Perform inspections and quality checks to ensure compliance with specifications and standards Assist with aircraft structures III work, including assembly, installation, and repair tasks as needed 5 + years of experience as a Machinists or Tool Maker 5 + years of experience operating manual mill and manual lathe machines 5 + years of experience reading and understanding engineering drawings, blueprints, schematics, and specifications 5 + years of experience working with precision measuring tools Knowledge of aircraft structures III and related processes

We Are Artificial Lift. It's what we do. All day. Everyday. Flowco is redefining well “optimization” with the very latest in USA manufactured gas lift and plunger lift technologies and delivering unrivaled customer support wherever and whenever you need it. We are seeking a QUALITY ASSURANCE INSPECTOR (2nd Shift) to become an integral part of our team! This position is located in FORT WORTH, TEXAS. Job Summary : Preserve the quality standards of products by the inspection of incoming materials, in-process work, finished products, and recording the quality results Responsibilities may include, but are not limited to: Read blueprints and use inspection equipment Inspect, test, or measure materials or products being produced (primarily machined parts) Inspection and measuring equipment calibration duties (machine shop related equipment) Develop and conduct various inspections on inbound materials from suppliers and outbound internally made products (machined parts and assemblies) Ensure that the quality check procedure in place are followed during every manufacturing phase Create comprehensive documentation for quality issues and document the corrective actions that were taken Educate the manufacturing team on quality control issues and work with departmental supervisors to improve overall product quality Create process checklists and coordinate quality inspections with departmental supervisors Required : High School Diploma/GED Required : 2-year minimum QA experience Preferred : 5-year minimum QA experience Preferred : Valid & Current CWI certification (welding inspection) Preferred : Valid & Current CWI certification (welding inspection) Preferred : Oil & Gas product/material/manufacturing industry experience Preferred : Experience with component/assembly inspection Must be able to lift up to 75lbs Must be able to stand for 8+ hours per shift Must be able to read, give, and take direction in English Must be able to work full time and have great attendance Must pass drug screen & background check Must have excellent communication skills Must be detailed oriented, have basic math skills and computer skills Must have a courteous and positive attitude, also have a sense of urgency, drive, pride, and desire to succeed Will be working in a shop environment Well versed at analyzing information, reporting investigation results, and have solid documentation skills Performs tasks associated with the quality control inspection of various products while meeting productivity, quality, safety, behavioral, and attendance expectations Experience with inspecting parts made in a machine shop and the typical inspection equipment typically used to inspect machined parts. 3+ experience using CMM machine is a plus. NO RECRUITERS/HEADHUNTERS/STAFFING AGENCIES Unsolicited emails or calls will not be read or returned

Join Komatsu and Be Part of Something Big! Are you ready to build something BIG? Komatsu in Longview, Texas is currently searching for a safety and quality minded individual to join the our Quality department. As a fabrication inspector, this dynamic indiviual will be working hands on with various inspection processes, collaborating with team members as well as supervision ensuring the quality standard. Komatsu offers excellent benefit package, competitive pay, annual bonus potential, and annual merit reviews. Key Job Responsibilities Work safe and be an advocate for safety. Visual inspection of manufactured parts and raw materials per drawing requirements. Hardness testing of raw materials and manufactured parts using the Brinell and Rockwell hardness testing methods. Prioritizes raw materials and parts for the various inspection processes. Requires the ability to prioritize raw materials and parts for the various inspection processes. Set‐up of all types of gages for use in the inspection processes. Requires the ability to set‐up all types of gages for use in the inspection processes. Knowledge of visual inspections processes and procedures. Knowledge of surface conditions of materials & machined surfaces. In‐process and final inspection of assembled equipment such as Feeder Breakers, Wheeled Loaders, Sizers, Drills, etc. per the requirements of applicable drawings, specifications, procedures & work instructions. Qualifications/Requirements Must have completed required training in the areas selected for specialization such as Assembled Equipment, CMM, Faro Laser Tracker, Faro Arm, Gear Check, Metals & Physical Testing Lab, or Gage Lab. Must have completed academic requirements for American Society for Nondestructive Testing (ASNT) Recommended Practice SNT‐TC‐1A Qualified to use both Brinell and Rockwell hardness testing machines. Minimum of two years Machinist, Inspection or Dimensional inspection experience. Ability to read, analyze, & interpret general business periodicals. Self‐starter, able to prioritize & multi‐task with good analytical skills. Ability to calculate figures & amounts such as proportions, percentages, area, circumference & volume. Experience with dimensional mechanical measuring tools such as micrometers & calipers. Ability to understand and interpret drawings and technical requirements. Knowledge of receiving, in‐process and final inspection processes and procedures. Additional Information Hiring Range At Komatsu, your base pay is one part of your total compensation package. This role pays $0.00. The actual offer will consider a wide range of factors, including experience and location. Company Benefits Komatsu provides an extensive and robust employee benefits package that is designed to enhance the well-being of our employees and family members. We embrace a positive and empowering employee experience with a culture that prides itself on a diverse and inclusive environment. * Health benefits: Medical, dental, vision, HSA, wellness programs, etc. * 401k and/or employee savings programs * Employee time off (vacation and designated holidays) * Employee and family assistance programs * Disability benefits * Life insurance * Employee learning and development programs Diversity & Inclusion Commitment At Komatsu, we come from diverse backgrounds, with unique perspectives, experiences and contributions. We believe that our people are part of our shared purpose. Connected by our core values of ambition, perseverance, collaboration and authenticity, we are committed to continually advancing in our support of diversity and inclusion. United, we are on a journey towards a sustainable future that creates value together. Company Information Komatsu develops and supplies technologies, equipment and services for the construction, mining, forklift, industrial and forestry markets. Headquartered in Tokyo, Japan, Komatsu employs more than 64,000 people worldwide, operating in more than 140 countries. For more than a century, the company has been creating value for its customers through manufacturing and technology innovation, partnering with others to empower a sustainable future where people, business and the planet thrive together. Since the company's founding in 1921, Komatsu has been committed to supporting individuals and communities through job training, skills development and giving back. As a Komatsu employee, you will be encouraged to grow alongside our global company, contributing to a more sustainable future for all. If you are looking for a company that values your talent and potential, join Komatsu to be a part of something big and help advance modern society. Learn more at **************** EEO Statement Komatsu is an Equal Opportunity Workplace and an Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Job DescriptionApply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: To verify property occupancy. To report on the general condition of the property using a mobile application. Most inspections are exterior only. About 10% require interior photos after the property has gone vacant. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities Most common type of inspection should only take 5-6 minutes. Complete the inspection within 4 days after it is assigned. Report general property conditions and make a determination of occupancy based on industry standards. Take 9+ photos of the property with brief comments. Complete a short form in an app. Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory. Requirements (to be considered you must have the following): Computer with an internet connection Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas) Smartphone (Android or iPhone) Printer Pass a standard background check using a valid driver's license Pay and Hours This is a 1099 position. Each inspection has a flat rate. Rates vary based on county and volume. Although you are paid per inspection, you will earn the equivalent of $30-$40 per hour. Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only Powered by JazzHR PLUohstqCX

Job Title: Distribution Inspector 3Location: Austin, TXKey Responsibilities:Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping. Spearhead capital rebuild and relocation projects, overseeing every aspect from planning to execution, ensuring seamless operations and compliance with industry standards. Utilize techniques and technologies to identify and address leaks swiftly and efficiently, minimizing environmental impact and ensuring the safety of communities. Ensure all inspections meet or exceed industry regulations and standards. Foster strong relationships with clients and internal teams, delivering clear, concise, and actionable insights from inspections, fostering a culture of collaboration and excellence. Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblite, Locus IQ, Pragma CAD, as-built drawings, and ONE MAP. Qualifications:5-6 years of hands-on experience in pipeline inspection, with a focus on capital rebuilds, relocations, and leak detection. API 1169 CertificationProven expertise in overseeing large-scale projects, from start to finish. Exceptional problem-solving skills and attention to detail, with a focus on precision and accuracy in all aspects of inspection and reporting. Strong communication skills with the ability to work effectively in a team environment. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Braun Intertec is seeking an Entry-Level Construction Materials Testing Technician to join our Tyler, Texas office. As a technician, you will learn to perform a variety of testing on construction materials such as soils, concrete, masonry, and asphalt. Onsite materials testing is conducted on various commercial and transportation construction projects. The chosen candidate(s) will receive in-depth technical training and industry certifications upon successful completion of examinations and demonstration of ability. This is a career opportunity to become a member of a highly successful, fast paced team with a steady and growing backlog of exciting projects. Candidates should be comfortable working outdoors in varying weather conditions and be able to lift 50-75+ pounds. Responsibilities: Perform field density tests of soils Perform field concrete testing, including slump, air content, and strength Prepare daily reports Work with project managers and senior technicians or staff to ensure specifications are followed Perform routine sampling and testing of soils, aggregates, concrete, masonry, and asphalt and assist with more complex tasks, as required The ideal candidate will have: A strong safety focus and attention to detail A demonstrated ability to learn and apply technical concepts Flexibility to work extended or nontraditional hours as needed Excellent verbal and written communication skills Related work experience in materials testing or construction is a plus All candidates must have: A High School diploma or equivalent A valid driver's license with clean driving record for the last 3 years The ability to lift 50-75+ pounds #LI-MJ1 Check out this video to see what life is like as a CMT: **************************** Braun Intertec employees are encouraged to expand their skills and certifications through company provided training and mentoring. Braun Intertec is a Drug-Free Workplace and requires all new hires to complete a pre-employment drug screen test, criminal background check, and motor vehicle report. Braun Intertec offers a competitive compensation and benefits package, including: medical, dental, vision, life insurance, 401(k) plan, PTO, Employee Stock Ownership Program (ESOP), and paid holidays. Compensation Range: $39,600.00 - $59,400.00 As an EEO/Affirmative Action Employer, all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, veteran or disability status. Braun Intertec strives to ensure that its careers web site is accessible to all. If you need assistance completing your online application, please email ************************. As an Equal Opportunity Employer, Braun Intertec is committed to providing reasonable accommodations for qualified individuals with disabilities and disabled veterans. If you need a reasonable accommodation to assist with your job search or application for employment, please e-mail us at ************************. In your e-mail, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.

The Quality Assurance Technician I supports AAON's commitment to delivering high-quality HVAC products by performing inspections, tests, and audits throughout the manufacturing process. This entry-level role ensures that components and finished units meet internal and external standards. The technician works closely with production teams to identify defects and recommend corrective actions. Attention to detail and a strong understanding of quality principles are essential. Primary Duties The Quality Assurance Technician I is responsible for executing quality control procedures and supporting continuous improvement efforts across production lines. Duties include: Primary duties may include, but are not limited to: * Conducting inspections of incoming materials, in-process components, and finished products to ensure compliance with specifications. * Documenting inspection results and maintaining accurate records in accordance with company standards. * Reporting non-conformances and assisting in root cause analysis and corrective action implementation. * Collaborating with production and engineering teams to resolve quality issues and improve processes. * Using measurement tools such as calipers, micrometers, and multimeters to verify product dimensions and performance. * Supporting internal audits and participating in quality training sessions. * Ensuring compliance with AAON's quality management system and applicable industrystandards. * Promoting a culture of quality and accountability on the production floor. Job Requirements Education and Experience Requirements: Requires a high school diploma or GED. Technical training or coursework in quality assurance, manufacturing, or HVAC systems is preferred. Knowledge, Skills, and Abilities: * Basic understanding of quality control principles and inspection techniques. · Familiarity with mechanical and electrical components used in HVAC systems. * Ability to read and interpret blueprints, schematics, and technical documents. · Strong attention to detail and organizational skills. * Effective communication and teamwork abilities. * Basic computer skills, including data entry and use of Microsoft Office, or any combination of education and experience, which would provide an equivalent background. Essential Mental and Physical Functions: This role requires consistent focus, precision, and the ability to work independently or as part of a team. Physical demands include standing for long periods, walking between workstations, and handling small tools and components. Key Functions: * Ability to identify defects and inconsistencies in products. * Manual dexterity for operating inspection tools and equipment. * Visual acuity for detailed inspections and reading technical documents. * Ability to lift up to 30 lbs occasionally and work in a fast-paced environment. Work Environment: The Quality Assurance Technician I works in a manufacturing setting with exposure to HVAC equipment, moderate noise levels, and varying temperatures. PPE is required in designated areas. The role may involve rotating shifts and occasional overtime based on production needs. Disclaimer: Please note this is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at a time with or without notice. This is not an exhaustive list of all functions that the employee may be required to perform, and the employee may be required to perform additional functions. The company reserves the right to revise this job description at any time. The employee must be able to perform the essential functions of the position satisfactorily. If requested, reasonable accommodations may be made to enable employees with disabilities to perform the essential functions of the job, absent undue hardship.

Come Grow with Us!! The purpose of the Quality Assurance Technician is to support production and ensure consistent product quality. This is achieved through in line sampling, internal and external sorting, and product testing on laboratory equipment to ensure product meets or exceeds customer expectations. ESSENTIAL DUTIES Perform product testing at designated intervals and during machine/job startups and provide feedback on quality measures Perform Job Audits of completed jobs for accuracy and report waste Review job jackets in process and confirm the tools required for manufacturing are available and correct Sort internal and external product for defects, coordinate staging, removal, and inventory level changes Assist in training personnel on best known methods of defect identification and new SOP implementation Actively promote following procedures and all measures of detection, correction, and prevention of defects Participate in root cause and corrective action process to eliminate and reduce manufacturing defects Support the manufacturing process contributing to overall plant success We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Pay: DOE

Prysmian is the world leader in the energy and telecom cable systems industry. Each year, the company manufactures thousands of miles of underground and submarine cables and systems for power transmission and distribution, as well as medium low voltage cables for the construction and infrastructure sectors. We also produce a comprehensive range of optical fibers, copper cables and connectivity for voice, video and data transmission for the telecommunication sector. We are 30,000 employees, across 50+ countries. Everyone at Prysmian has the potential to make their mark; because whatever you do, wherever you are based, you will be part of a company that is helping transform the world around us. Make Your Mark at Prysmian Group - Join Us Comprehensive Benefit Package including Medical, Dental, Vision and Life Insurance. 401K Savings Plan with Company Matching Contributions, Paid Holidays and Vacation. Overview: The QA Lab Tech ensures product compliance at the point of production, laboratory testing, data analysis, and support for root cause investigations. This role is key in maintaining quality standards and driving continuous improvement on the manufacturing floor. Compensation: $25.80/hr Schedule: 2-2-3 12-hour shift (day/night shift available) Training Hours: Mon-Fri 7am - 3pm Job Duties: • Support production by being a QA presence at production lines. • Interact with operators and helpers to ensure standard work is done consistently. • Provide technical support for lab operations. • Select and test products at various production stages. • Perform destructive and non-destructive testing. • Collaborate with management and engineering on standards. • Follow safety and procedural guidelines strictly. • Record and evaluate test data, noting deviations. • Input data into analysis systems. • Execute routine tasks accurately and timely. • Serve as a quality contact for operators and helpers. • Conduct and document production audits. • Maintain a quality presence in production areas. • Perform other reasonable tasks as assigned. Key Job Requirements: • Results-driven with manufacturing experience. • Adaptable to fast-paced environments. • Detail-oriented with big-picture awareness. • Skilled in multitasking under pressure. • Strong communicator and motivator. • Critical thinker with analytical skills. • Proficient in written and verbal communication. • Strong planning, leadership, and computer skills. Desired Background: • 2-4 years in wire and cable or related industry. • Experience with various software systems. • Project management and Lean Manufacturing familiarity. Work Environment and Physical Requirements: • Ability to stand for extended periods of time (up to 8-10 hours per shift). • Ability to walk long distances within the plant and between workstations. • Ability to lift and carry up to 40 pounds occasionally. • Manual dexterity and ability to handle small tools and lab equipment. • Ability to bend, stoop, reach, and perform repetitive motions as needed. • Tolerance to working in varying environmental conditions (e.g., heat, noise) Prysmian, as an Equal Opportunity Employer, aims to attract and recruit individuals with diverse backgrounds, skills, and abilities. We strongly believe that diversity brings significant value at all levels of the organization, increasing the possibility of capturing market opportunities and maximizing value for our customers and stakeholders. With Diversity, Equity, and Inclusion (DE&I) as part of our Social Ambition 2030 and a strategic pillar of our Company culture, Prysmian is committed to the development of an organization that prioritizes talent, where people feel respected, included, and free to fully express their potential just as they are. All Managers and HRs in Prysmian are responsible for ensuring DE&I policies are respected during the recruiting process, as well as recognizing and mitigating unconscious biases that must not influence our selection processes. All persons will be considered for employment without regard to their race, ethnicity, religion, nationality, origin, citizenship status, socio-economic status, age, sex, gender identity or expression, sexual orientation, marital status, disability, military service or veteran status, pregnancy, parental leave, medical conditions, or any other characteristic protected by applicable federal, state or local laws. Prysmian will endeavor to make a reasonable accommodation for any disclosed physical or neurological condition or disability of a qualified applicant unless the accommodation would impose an undue hardship on the operation of our business. Visit our DE&I Page to learn more about Prysmian's commitments. Your application data will be treated according to our Data Protection Policy. If you believe you require assistance to complete this form or to participate in an interview, please contact us at *********************************. ************************************************************************************ ******************************************************************************************************* ********************************************************************************************

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for sustainability, quality and integrity. Our 99,600 employees operate a network of 2,600 offices and laboratories, working together to enable a better, safer and more interconnected world. Summary The Petroleum Inspector performs testing of bulk liquid or gaseous hydrocarbon or chemical cargo supervision services, such as but not limited to, gauging, sampling and reconciliation of transfer from shore tank, barge or ship to shore tank, barge or ship. Acts in accordance with Client, SGS Operational Excellence practices and Industry standards. Job Functions * Physically samples, measures, and takes the temperature of vessel's tanks and shore tanks utilizing a variety of methods dictated by company and American Petroleum Institute (API) procedures. * Follows Safely standards and performs job efficiently. Works within defined technical processes and procedures or methodologies. * Calculates and reports quantities of the bulk liquid or gaseous hydrocarbon transferred and performs full reconciliation. * Completes all required reports and forms, using the SGS propriety Ship Inspection Report (SIR) and / or Site Acceptance Test (SAT) systems. * Works in cooperation with client's representatives, US Customs, vessel personnel, government agents and shore facility personnel. * Maintains regular communication with the business unit office staff with reference to job status, problems, concerns, etc. * Maintains knowledge and adheres to the latest industry, client and SGS internal standards, policies and procedures. * Operates to the highest standards of ethics, in accordance with the SGS Code of Integrity including adhering to all company safety practices. * Assists in other branch duties as assigned related to back office support and housekeeping. * Performs other duties as assigned. Qualifications Education and Experience * High School or equivalent (Required) * 6 months to 2 years of transferrable industry experience (Prefered) * Completion of internal Inspector Development Program Level (Preferred) Licenses and Certifications * Valid Driver's License (Required) * Transportation Worker Identification Credential (TWIC) (Preferred) * Must maintain valid Driver's License and TWIC card once obtained through course of employment (Required) * International Federation of Inspection Agencies (IFIA) Certification (Preferred) Knowledge, Skills and Abilities * Continues to gain knowledge and expertise in the profession (Required) * Uses existing procedures to solve routine or standard problems (Required) * Has no discretion to vary from established procedures by performing structured work assignments (Required) * Language Skills: English - Basic level (Required) * Mathematical Skills: Basic level of proficiency with a good understanding of fractions and decimals (Required) * Reasoning Skills/Abilities: Intermediate level (Required) * Communication Skills: Must be able to effectively present information and respond to questions from individuals and/or groups both within the organization or while representing the organization (Required) * Flexibility: Must be flexible with ability to accept changes in instructions on short notice (Required) * Individual must be dependable and reliable whose daily presence adds to the success of the Department (Required) * Must have a positive attitude and show eagerness to accomplish goals and achieve desired results while working independently or in a team setting (Required) * Ability to work independently with minimal or no supervision (Required) * Ability to work effectively under pressure, while performing numerous projects with different deadlines (Required) * Ability to synthesize information from a variety of sources into solutions (Required) Computer Skills * MS Office - Basic to Intermediate user proficiency (Required) Physical Demands of the Job * Stand: Frequently * Move or traverse: Frequently * Sit: Occasionally * Use hands: Constantly * Reach with hands and arms: Frequently * Climb or balance: Frequently * Stoop, kneel, crouch or crawl: Frequently * Talk/hear: Constantly * Taste/Smell: Occasionally * Lift/carry/push or pull: Frequently 50 lbs Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a call back. Please note, this phone number is not for general employment information, but is only for individuals who are experiencing difficulty applying for a position due to a disability.

Westlake offers you the potential to enrich your work life and career experience in an entrepreneurial environment. We work together to enhance peoples' lives through our products and presence in the communities in which we operate. Responsible for the coordination of the safe day-to-day operations of the Quality Control Laboratory. Ensure that test methods comply with internal, ISO, ASTM, government, and industry standards. Ensure the provision of analytical testing support to Longview Operations departments, HSE Environmental, Maintenance Reliability, and, as needed, Technical Service & Development (TS&D), Product Development & Stewardship, Research & Support Technology Labs, Product Regulatory, Lake Charles Operations, and customers. Responsible for the preparation and maintenance of routine and non-routine test procedures and equipment. Responsible for the Quality Assurance group. Supervise the work of the Quality Assurance (QA) Specialists. Responsible for oversight of the site quality program that ensures that all products released for shipment meet or exceed customers' fitness-for-use requirements, including disposition of non-conforming product. These functions require a working knowledge of the Longview products, personnel, and business practices. DUTIES AND RESPONSIBILITIES May include, but are not limited to, the following: Perform duties in a manner that protects personal safety as well as the safety of all personnel on site. Follow Company policies and programs, including all HSE policies and procedures. When appropriate, promptly report Safety, Health, or Environmental incidents or issues to management so the situation can be corrected. Attend weekly Safety meetings to help prevent off-site and job accidents. Establish and lead a laboratory safety program. Interpret, explain, and administer Company personnel policies and departmental instructions as they apply to employees supervised. Explain, reinforce, and enforce Company and departmental policies. Ensure that the laboratory performs to high-quality standards, including the establishment and maintenance of control standards for critical laboratory tests. Ensure that laboratory equipment is properly calibrated, according to ISO 9001 requirements. Lead first line team, seeking assistance from outside resources, technical support or departmental supervision as needed. Oversee the Lead Technician, Sr. Technician, Lab Technician, Day Technician, and QA Specialist daily assignments and priorities. Ensure that the overall training for QA Specialist and QC Lab personnel is well coordinated. Assign and direct personnel regarding the training of laboratory technicians and other appropriate personnel in the use of laboratory instrumentation and equipment. Assist in the preparation of appropriate training materials and help coordinate the continuing education of QA and laboratory personnel. Complete all computer-based training modules as assigned and ensure that employees supervised do the same. Clearly communicate expectations for employees supervised and follow up with appropriate reinforcement. Complete annual Performance Appraisals and review with employees supervised, i.e. QA Specialists, QC Day, Lead, and Lab Technicians. Objectively evaluate employee performance and seek opportunities for improvement in all job classifications. Assign and direct personnel to ensure that lab equipment is operational. Assign personnel to write work orders, issue Safe Work and Open Flame permits, and assign responsibility for Lockout-Tagout of equipment. Oversee the preventative maintenance program for lab equipment and instruments. Utilizing the Enterprise Document Management System (EDMS), assign and direct personnel regarding creation, revision, and maintenance of laboratory SOPs. Ensure maintenance of instrument and equipment operating procedures. Approve laboratory SOPs. Responsible for the oversight of the site quality program for evaluating raw material fitness-for-use, reviewing batch new-make testing records, reviewing shipment testing records, reviewing customer complaint database information, and reviewing manufacturing records. Work with Operations, TS&D, and business teams to develop and implement improvements to the site quality assurance processes to ensure that only the product that meets customer fitness-for-use is released for shipment. Oversee the QA process for disposition of non-conforming product, including product that does not initially meet specifications and product that cannot be assigned to an order through the SAP Batch Determination transaction. Authorize, initiate, and approve new or revised Sales Specifications, Formula Approval Sheets, Formula Specifications, Sampling Plans, and Customer Specifications. Approve all new raw material specifications to ensure compliance with all site quality procedures and processes. Ensure maintenance of raw material specification files. Attend ISO Internal Auditor Training. Serve as Lead Auditor/Auditor for Westlake Internal Audits. Follow Level II and III SOPs in accordance with ISO 9001 requirements and ensure supervised employees do the same. Coordinate with Operations, TS&D, Technology Labs and Product Regulatory to ensure all Westlake products comply with required governmental mandates. Serve as a technical resource for third-party and customer audits, and customer visits. Direct the selection, set-up and operation of new laboratory testing equipment, seeking appropriate input from the QC Lab Chemist and/or Technology Lab resources. Ensure coordination of work schedules, including overtime when needed. Ensure location and sourcing of special testing with outside laboratories. Establish a program for maintenance of lab supplies inventory. Attend appropriate seminars, conferences and training programs. Maintain contact with vendors to keep abreast of new instrumentation and equipment used in the polymer industry that may benefit Westlake labs. Write monthly reports of work performed. Attend morning Production Meetings as required. Maintain ASTM membership and attend D20 committee meetings. Perform additional tasks as assigned by management. EDUCATION, EXPERIENCE AND QUALIFICATIONS High School diploma or the equivalent is required. B.S. or A.A. Degree in Chemistry or lab related field preferred, but not required. Minimum 5 years of experience in quality/lab processes and operation. Knowledge of Polyethylene and Epolene production facilities is required. Knowledge of analytical and physical testing requirements and instrumentation used for each production area is required. Proficiency in verbal and written communication skills is required. Software/computer experience is required. PHYSICAL DEMANDS This job is performed mainly in control room or office setting; physical presence is required. While performing the duties of this job, the employee is frequently required to sit; stand; walk; have full use and range of motion of arms, hands and fingers to reach, grasp, hold, push or pull, twist, and work with tools; and talk or hear. The employee is occasionally required to perform tasks that may require bending, stooping, kneeling, crouching, lying down or working from elevated platforms. The employee must be able to move safely over uneven terrain or in confined spaces. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. The employee must be able to see details of objects that are more/less than a few feet away; see differences between colors, shades, and brightness, and determine the distance between objects. This job requires a response to audible emergency alarms inside of the plant. Employees must be able to evacuate when required. WORK ENVIRONMENT The employee must be able to work in a normal factory environment, including enclosed spaces and exposure to various hazards. The noise level in the work environment is usually moderate, as it is normally based in an office. Some of the work may be required in the operating units, which can require the use of required PPE, including safety glasses, hearing protection, flame-retardant clothing, etc. May also result in exposure to outside elements and may require the use of stairs and elevators. Travel, including air travel or auto travel, may occasionally be required. Westlake is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to any characteristics protected by applicable legislation. If you are an active Westlake employee (or an employee of any Westlake affiliates), please do not apply here. You will apply via the Jobs Hub application in Workday.

About Us: Skeeter Products, Inc. is a leading boat manufacturing company, known for producing state-of-the-art, high-performance Bass Fishing Boats that set the standard in the boating industry. Our reputation for quality craftsmanship and innovation has made us a top choice for boating enthusiasts worldwide. We're looking for someone with previous quality experience in a manufacturing environment to join our dynamic team as a Quality Inspector and help us continue producing world-class boats. JOB SUMMARY: Responsible for assisting in daily QA activities as assigned for various areas of boat and trailer plant. Duties include part and process inspections, process reviews, QA projects, reporting, and all other duties as assigned. JOB DUTIES: Assist daily QA inspection workflow at assigned area Assist in interdepartmental communication of QA Department process Perform data logging Assist in QA projects and procedures at assigned area Confirm product is built to work order and quality specifications Fill out and file proper check sheets and reports Cross assist inside Quality Department Any other duties or training assigned QUALIFICATIONS: Understanding of Skeeter QA Processes Understanding of boat and trailer mechanical systems Understanding of boat and trailer cosmetic appearance Must have strong communication skills Working ability of MS Office products Ability to read and write English Color sensitivity Work overtime as needed Ability to lift up to 50 lbs. Ability to work in heat Ability to work around fumes, chemicals, dirt and dust Color sensitivity and good visual acuity Manual dexterity Have good attendance habits Ability to follow instructions accurately

Prysmian is the world leader in the energy and telecom cable systems industry. Each year, the company manufactures thousands of miles of underground and submarine cables and systems for power transmission and distribution, as well as medium low voltage cables for the construction and infrastructure sectors. We also produce a comprehensive range of optical fibers, copper cables and connectivity for voice, video and data transmission for the telecommunication sector. We are 30,000 employees, across 50+ countries. Everyone at Prysmian has the potential to make their mark; because whatever you do, wherever you are based, you will be part of a company that is helping transform the world around us. Make Your Mark at Prysmian Group - Join Us Comprehensive Benefit Package including Medical, Dental, Vision and Life Insurance. 401K Savings Plan with Company Matching Contributions, Paid Holidays and Vacation. Overview: The QA Lab Tech ensures product compliance at the point of production, laboratory testing, data analysis, and support for root cause investigations. This role is key in maintaining quality standards and driving continuous improvement on the manufacturing floor. Compensation: $25.80/hr Schedule: 2-2-3 12-hour shift (day/night shift available) Training Hours: Mon-Fri 7am - 3pm Job Duties: * Support production by being a QA presence at production lines. * Interact with operators and helpers to ensure standard work is done consistently. * Provide technical support for lab operations. * Select and test products at various production stages. * Perform destructive and non-destructive testing. * Collaborate with management and engineering on standards. * Follow safety and procedural guidelines strictly. * Record and evaluate test data, noting deviations. * Input data into analysis systems. * Execute routine tasks accurately and timely. * Serve as a quality contact for operators and helpers. * Conduct and document production audits. * Maintain a quality presence in production areas. * Perform other reasonable tasks as assigned. Key Job Requirements: * Results-driven with manufacturing experience. * Adaptable to fast-paced environments. * Detail-oriented with big-picture awareness. * Skilled in multitasking under pressure. * Strong communicator and motivator. * Critical thinker with analytical skills. * Proficient in written and verbal communication. * Strong planning, leadership, and computer skills. Desired Background: * 2-4 years in wire and cable or related industry. * Experience with various software systems. * Project management and Lean Manufacturing familiarity. Work Environment and Physical Requirements: * Ability to stand for extended periods of time (up to 8-10 hours per shift). * Ability to walk long distances within the plant and between workstations. * Ability to lift and carry up to 40 pounds occasionally. * Manual dexterity and ability to handle small tools and lab equipment. * Ability to bend, stoop, reach, and perform repetitive motions as needed. * Tolerance to working in varying environmental conditions (e.g., heat, noise) Prysmian, as an Equal Opportunity Employer, aims to attract and recruit individuals with diverse backgrounds, skills, and abilities. We strongly believe that diversity brings significant value at all levels of the organization, increasing the possibility of capturing market opportunities and maximizing value for our customers and stakeholders. With Diversity, Equity, and Inclusion (DE&I) as part of our Social Ambition 2030 and a strategic pillar of our Company culture, Prysmian is committed to the development of an organization that prioritizes talent, where people feel respected, included, and free to fully express their potential just as they are. All Managers and HRs in Prysmian are responsible for ensuring DE&I policies are respected during the recruiting process, as well as recognizing and mitigating unconscious biases that must not influence our selection processes. All persons will be considered for employment without regard to their race, ethnicity, religion, nationality, origin, citizenship status, socio-economic status, age, sex, gender identity or expression, sexual orientation, marital status, disability, military service or veteran status, pregnancy, parental leave, medical conditions, or any other characteristic protected by applicable federal, state or local laws. Prysmian will endeavor to make a reasonable accommodation for any disclosed physical or neurological condition or disability of a qualified applicant unless the accommodation would impose an undue hardship on the operation of our business. Visit our DE&I Page to learn more about Prysmian's commitments. Your application data will be treated according to our Data Protection Policy. If you believe you require assistance to complete this form or to participate in an interview, please contact us at *********************************. ************************************************************************************ ******************************************************************************************************* ********************************************************************************************

AMERISPEC INSPECTION SERVICES IS INTERESTED IN HIRING THE NEXT GREAT INSPECTORS IN EAST TEXAS & LOUISIANA! Do you have what it takes to be that person? AmeriSpec Inspection Services is looking to hire Full Time Professional Inspectors. About AmeriSpec: We are a family owned and locally operated company that provides quality inspection services for our clients here in East Texas and Louisiana. We are committed to providing our staff the training, knowledge, and tools needed to be successful in the field while providing the excellent service that our clients demand. Essential Duties and Responsibilities: include the following. This position independently completes home inspections and ancillary services from start to finish. Other duties may be assigned. Attend annual regional AmeriSpec conferences Experience in Remediation, Water Damage, Trades, and/or an allied craft a plus Experience in writing protocols a plus Valid Driver's License and clean driving record Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals Willingness to maintain records and communicate with Marketing Manager and Office Manager about job tasks Willingness to perform onsite educational seminars for real estate agents and other local professionals Willingness to comply with the State of Texas and governing agencies for licenses held Willingness to comply with the State of Louisiana Home Inspector Laws & Regulations and gain licensing in that state Perform other related duties as assigned Assist in marketing efforts as directed by a Marketing Representative Possess good communication skills and good computer skills Develop and maintain alliances with successful area real estate agents Work closely with Owner and/or Senior Inspectors to learn the essentials of Commercial & Home Inspections along with Mold Assessments and Protocols Independently perform home inspections from start to finish Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with little to no supervision. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience: Bachelor's Degree or equivalent from four-year college or technical school; or six months to one year experience as an AmeriSpec Associate Inspector; Completion of state requirements by an approved TREC provider; or equivalent combination of education and experience. Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Mathematical Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret graphs. Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Certificates, Licenses, Registrations: Must be TREC licensed and willing to be licensed in the State of Louisiana Must comply with applicable state licensure requirements and continuing education Must be willing to receive ongoing training and licensing for our ancillary services that we offer Other Skills and Abilities: Good communication skills Ability to work independently Ability to learn new information Ability to learn new skills Relationship building Time management Organizational skills Mentoring and coaching skills Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel objects, tools, or controls. The employee is also regularly required to talk and/or listen. The employee is frequently required to stand, to walk, and to reach with hands and arms. The employee is occasionally required to sit, climb or balance, stoop, kneel, crouch, or crawl and to smell. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to outside weather conditions. The employee is occasionally exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; extreme cold; extreme heat; risk of electrical shock and risk of radiation. The noise level in the work environment is usually moderate. Travel: This position requires extended periods of travel time, to and from job locations and areas where continuing education may be required. Inspectors are required to maintain cleanliness of personal vehicles at all times. Fuel expenses will be reimbursed. Benefits Career Advancement Opportunities Flexible Scheduling Great Work Environment Sick Time, PTO, and Health Benefits Plan AmeriSpec Inspection Services is an Equal Opportunity Employer Compensation: $20.00 - $24.00 per hour AmeriSpec offers the best training in the industry by combining classroom instruction, in-field inspections and hands-on technical training in our state-of-the-art facility, led by instructors with over 30 years of experience. A replica of a home, as well as a host of training aids such as a roof, water heater, plumbing, electrical panel and appliances are utilized during training. It is specifically designed for AmeriSpec business owners and inspectors and illustrates what to examine when performing a quality home inspection. Parts of the house are fully functional, such as the kitchen and indoor lighting. In addition, used water heaters, furnaces, and air conditioning units are brought into the classroom, giving inspectors the opportunity to examine these important home systems and components. This innovative facility includes a combustion safety simulator/residential pressure diagnostic tool. This provides AmeriSpec business owners and inspectors with the training needed to make them the best in the industry. Interested in a career with AmeriSpec? Please review our open positions using the filters above. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to AmeriSpec Corporate.

Department: Quality Assurance - 503 JobTitle: QA Technician ESSENTIALDUTIES AND RESPONSIBILITIES include the following. Other duties may beassigned. This position will cover various departments and shifts. Inspect products and monitor operating procedures at all phases of production run to ensure SOP's and GMP's are correctly followed Collect samples from required areas of the plant and transfer samples to the laboratory Verify internal temperatures of products Perform preoperational evaluation on all processing rooms, equipment and facilities to ensure SOP's are being followed Auditing incoming raw materials and outgoing products; i.e., check temperatures, packaging, label of product etc. Perform thermometer calibration according to SOP's Fill out paperwork: i.e., preoperational evaluation records, product information, operational evaluation record etc. Monitor production personnel to ensure employee hygiene practices are being followed correctly Verify the calibration of production instruments: i.e., metal detector and scales Quality Controls Safety Teamwork Other duties deemed necessary by management Prepare sample and incubation media for microbiological test Perform chemical analysis: i.e., APC, Listeria, Salmonella, Coliform, Yeast and Mold Verify QA paperwork: i.e., pre shipment review, product information, product formulation log, injection and tumble record, etc. Maintain cleanliness of laboratory. Dispose of chemical waste and retains sample as required. Record test results and fill out required paperwork: i.e., non-complaint product record Perform sensory evaluation of product including flavor, color, and microbiological test. Prepare and sent sample to outside laboratory for shelf life study, chemical, and microbiological test Prepare label including nutritional information, ingredient statement, and heating instruction for application of USDA approval Basic supervision of all of the above duties listed

The perks of working here We're committed to providing our employees with meaningful benefits and real opportunities. Good Benefits including: Medical Dental (with orthodontic) Disability Vision Life insurance 401K with company match Attendance Bonuses Merit Increases Paid Time Off (PTO) and Paid Holidays Growth opportunities in a stable and safe work environment Collaborative and positive team culture Responsibilities Revolution is hiring a Quality Assurance Technician for the night shift at its Kilgore, TX facility. This is a 12 hour rotating shift schedule from 7:00 pm - 7:00 am.This position will work closely with production lines to ensure the facility meets quality standards. • Inspect product to verify compliance with known specifications (all departments) • Correctly input data into computer system • Interpret test data as pass or fail • Handle quality issues with peers and departmental supervision during shift • Be proactive in addressing quality issues and provide feedback in a timely manner • Assure that raw materials are within tolerance • Write and place non-conforming material on hold • Perform Layered Process Audits throughout the plant • Perform measurement studies • Write/update Standard Operating Procedures (SOP's) • Find Continuous Improvement Ideas in the plant • Effectively communicate with department Managers, Supervisors and Leads Qualifications High School diploma 2 year college degree preferred 1 - 2 years of Quality experience in an industrial environment preferred. Necessary math skills - Addition, subtraction, and multiplication to record accurate reports. Must be able to read and write. Experience with automated manufacturing equipment preferred. Periodically lift and carry up to 30 lbs. Must be able to stand and walk for 8-12 hours. Ability to work 12-hour shifts. Must be able to read a tape measure Must be able to spot defects that could occur in each department Must be able to write neatly and legibly Must be able to distinguish between slight color variations Able to read, understand and verify all information on spec sheets. Must be detail-oriented and possess a pride of workmanship Demonstrate basic math skills Must have adequate computer skills…Word, Excel, PowerPoint Capable of working without supervision Capable of interaction with management and peers ABOUT REVOLUTION It's time to redefine possible. At Revolution, we exist to empower businesses and consumers to contribute to a better future through sustainable loop plastic solutions. Our unique, circular approach results in sustainable products and services that effectively meet the needs of businesses today, while helping prepare them for tomorrow. And we're just getting started. Learn more at revolutioncompany.com. Revolution welcomes diversity and is An Equal Opportunity/Affirmative Action Employer - Minority / Women / Disability / Veteran and other protected categories are always encouraged to apply. #operation #operator #recycling #plastics #manufacturing #reclaim #plantworker #production #extrusion #bags #plasticbags #xtrusion #bags #plasticbags PM20 We can recommend jobs specifically for you! Click here to get started.

Great job for Uber Drivers, Lyft, Door Dash, Uber Eats, Pizza delivery, etc. What Do Mortgage Field Service Contractors Do? By law, mortgage companies and banks are required to document the occupancy and physical condition of all mortgaged loans. To do this they send a Property Inspector to the physical property to take specific photos and to reasonably determine if the property is occupied or vacant. The property inspector then reports the general condition of the property using a mobile app. Mortgage Field Service Inspectors are Property Inspectors who: *Determine if a property is occupied or vacant. *Rate the property as Good, Fair, or Poor. *Take photos of the property using your smart cell phone. *Fill out a form on your cell phone using a downloadable app. *Answer multiple choice questions about the property condition. REQUIREMENTS: *Must be able to pass a criminal background check. *Must have dependable transportation (good gas mileage is a plus). *Must have a smartphone (Android or iPhone). *Must have a printer/scanner (or easy access to both). *Must a desktop/laptop or tablet to print forms. INCOME and ASSIGNMENTS: Income-based on area and volume. Most inspectors can complete several inspections an hour. Rural areas may pay more per inspection on average. The faster inspections are completed, the more inspections are provided. Based on 1099 contractor work. No resume required.

Job DescriptionPetroleum Inspector Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company's core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty Integrity: Create an empowered, engaging, and accountable culture focused on client service Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Position Summary Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. • Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. • Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours • Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours • Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours • Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours • Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours • Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours • Sitting Weight N/A-Duration/Day Up to 6 hours • Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved.