Quality control technician jobs in Brownsville, TX - 33 jobs

Ability to complete all phases of process including machine/equipment operation, setup, troubleshoot and correct process deficiencies Ability to develop process/procedures to customer requirements Work with minimum supervision and a dynamic environment with frequent interruptions while ensuring a safe workplace Participate in productivity improvements Proficient in problem solving in manufacturing processes Ability to lead problem solving exercises Be able to offer ideas to improve quality, manufacturing and efficiency within the department Must have working knowledge of basic hand tools and measuring devices and equipment, good mechanical aptitude and blueprint reading skills Primary Responsibilities: Check finished parts for defects, maintain adequate supplies of miscellaneous items used in department and requisition parts needed, and assist in daily operation of department when supervisor is out Must be able to operate, set up and trouble shoot all equipment Occasionally relieve operators in production lines (applicable to production departments) Must be able to train others in the operation, set up, troubleshooting of equipment, and manufacturing processes Should be able to offer and design ways to improve quality, manufacturing and efficiency within the department Should constantly promote and improve safety Must be able to safely operate and drive forklift as well as operate any other material handling equipment Must be able to communicate problems and resolutions to management Must have own toolbox and tools needed to perform the job Complete production documentation and reports Perform all 5s, TPM and SMED responsibilities assigned First Brands Group is a proud equal opportunity employer. We are deeply committed to building a workplace and global community where inclusion is valued. Employment decisions at FBG are based on business needs, job requirements and individual qualifications, without regard to race, color, religion, or belief, national, social, or ethnic origin, sex, or age. All qualified applicants will be considered for employment without regard to the above forementioned as well as, gender, gender identity family/marital status, sexual orientation, national origin, age, past or present military veteran status, or any other non-merit based or legally protected grounds. FBG will not tolerate discrimination or harassment based on any of these grounds or characteristics.

Full-time Description The QC Specialist is responsible for performing final quality inspections on all serviced vehicles to ensure they meet Bert Ogden Auto Group's safety and quality standards prior to customer delivery. This includes verifying proper torque of all lug nuts and confirming that the oil pan drain plug and oil filter housing are properly secured and free of leaks. The QC Specialist serves as the final checkpoint to guarantee that all vehicles are safe, compliant, and ready for release. Requirements Perform final quality inspections on all serviced vehicles before release. Verify all lug nuts are present, undamaged, and torqued to manufacturer specifications. Inspect oil pan drain plug and oil filter housing for proper installation and leaks. Use proper tools and PPE, ensuring torque wrenches and inspection equipment are calibrated. Document inspection results using the QC Inspection Checklist for each vehicle. Red-tag and report any failed inspections or safety concerns immediately to the Shop Foreman or Service Manager. Record all corrective actions and re-inspect vehicles after repairs. Ensure all completed checklists are signed, dated, and attached to the Repair Order. Coordinate with Service Advisors and Cashiers to verify QC completion before vehicle delivery. Maintain consistent adherence to Bert Ogden Auto Group's safety and quality standards. Remain available during all shop hours and ensure coverage during absences. Uphold zero tolerance for missed inspections or critical safety errors. QUALIFICATIONS Ability to work efficiently in a fast-paced environment. Advanced knowledge of vehicle maintenance procedures. Effective communication skills with customers and team members. EDUCATION and/or EXPERIENCE Strong attention to detail and organizational skills. Proficiency in using torque wrenches and inspection tools. Ability to accurately complete documentation and follow processes. Effective communication with technicians, service advisors, and management. PHYSICAL DEMANDS & WORK ENVIRONMENT Ability to stand, bend, and move under vehicles for extended periods. Must be able to lift up to 50 lbs. safely. Occasional lifting, standing, crawling, reaching, use of stairs. Occasional attendance at social gatherings. Ability to travel occasionally. CERTIFICATES, LICENSES, REGISTRATIONS Valid Texas Driver's License OTHER REQUIREMENTS Pass Background Check Pass Drug Test 21 Years-Old or Older EMPLOYMENT BENEFITS INCLUDE: Paid Vacation and Holidays 401(K) Vision Insurance Dental Insurance Medical Insurance

Full-time Description The QC Specialist is responsible for performing final quality inspections on all serviced vehicles to ensure they meet Bert Ogden Auto Group's safety and quality standards prior to customer delivery. This includes verifying proper torque of all lug nuts and confirming that the oil pan drain plug and oil filter housing are properly secured and free of leaks. The QC Specialist serves as the final checkpoint to guarantee that all vehicles are safe, compliant, and ready for release. Requirements Perform final quality inspections on all serviced vehicles before release. Verify all lug nuts are present, undamaged, and torqued to manufacturer specifications. Inspect oil pan drain plug and oil filter housing for proper installation and leaks. Use proper tools and PPE, ensuring torque wrenches and inspection equipment are calibrated. Document inspection results using the QC Inspection Checklist for each vehicle. Red-tag and report any failed inspections or safety concerns immediately to the Shop Foreman or Service Manager. Record all corrective actions and re-inspect vehicles after repairs. Ensure all completed checklists are signed, dated, and attached to the Repair Order. Coordinate with Service Advisors and Cashiers to verify QC completion before vehicle delivery. Maintain consistent adherence to Bert Ogden Auto Group's safety and quality standards. Remain available during all shop hours and ensure coverage during absences. Uphold zero tolerance for missed inspections or critical safety errors. QUALIFICATIONS Ability to work efficiently in a fast-paced environment. Advanced knowledge of vehicle maintenance procedures. Effective communication skills with customers and team members. EDUCATION and/or EXPERIENCE Strong attention to detail and organizational skills. Proficiency in using torque wrenches and inspection tools. Ability to accurately complete documentation and follow processes. Effective communication with technicians, service advisors, and management. PHYSICAL DEMANDS & WORK ENVIRONMENT Ability to stand, bend, and move under vehicles for extended periods. Must be able to lift up to 50 lbs. safely. Occasional lifting, standing, crawling, reaching, use of stairs. Occasional attendance at social gatherings. Ability to travel occasionally. CERTIFICATES, LICENSES, REGISTRATIONS Valid Texas Driver's License OTHER REQUIREMENTS Pass Background Check Pass Drug Test 21 Years-Old or Older EMPLOYMENT BENEFITS INCLUDE: Paid Vacation and Holidays 401(K) Vision Insurance Dental Insurance Medical Insurance

Full-time Description The QC Specialist is responsible for performing final quality inspections on all serviced vehicles to ensure they meet Bert Ogden Auto Group's safety and quality standards prior to customer delivery. This includes verifying proper torque of all lug nuts and confirming that the oil pan drain plug and oil filter housing are properly secured and free of leaks. The QC Specialist serves as the final checkpoint to guarantee that all vehicles are safe, compliant, and ready for release. Requirements Perform final quality inspections on all serviced vehicles before release. Verify all lug nuts are present, undamaged, and torqued to manufacturer specifications. Inspect oil pan drain plug and oil filter housing for proper installation and leaks. Use proper tools and PPE, ensuring torque wrenches and inspection equipment are calibrated. Document inspection results using the QC Inspection Checklist for each vehicle. Red-tag and report any failed inspections or safety concerns immediately to the Shop Foreman or Service Manager. Record all corrective actions and re-inspect vehicles after repairs. Ensure all completed checklists are signed, dated, and attached to the Repair Order. Coordinate with Service Advisors and Cashiers to verify QC completion before vehicle delivery. Maintain consistent adherence to Bert Ogden Auto Group's safety and quality standards. Remain available during all shop hours and ensure coverage during absences. Uphold zero tolerance for missed inspections or critical safety errors. QUALIFICATIONS Ability to work efficiently in a fast-paced environment. Advanced knowledge of vehicle maintenance procedures. Effective communication skills with customers and team members. EDUCATION and/or EXPERIENCE Strong attention to detail and organizational skills. Proficiency in using torque wrenches and inspection tools. Ability to accurately complete documentation and follow processes. Effective communication with technicians, service advisors, and management. PHYSICAL DEMANDS & WORK ENVIRONMENT Ability to stand, bend, and move under vehicles for extended periods. Must be able to lift up to 50 lbs. safely. Occasional lifting, standing, crawling, reaching, use of stairs. Occasional attendance at social gatherings. Ability to travel occasionally. CERTIFICATES, LICENSES, REGISTRATIONS Valid Texas Driver's License OTHER REQUIREMENTS Pass Background Check Pass Drug Test 21 Years-Old or Older EMPLOYMENT BENEFITS INCLUDE: Paid Vacation and Holidays 401(K) Vision Insurance Dental Insurance Medical Insurance

Full-time Description The QC Specialist is responsible for performing final quality inspections on all serviced vehicles to ensure they meet Bert Ogden Auto Group's safety and quality standards prior to customer delivery. This includes verifying proper torque of all lug nuts and confirming that the oil pan drain plug and oil filter housing are properly secured and free of leaks. The QC Specialist serves as the final checkpoint to guarantee that all vehicles are safe, compliant, and ready for release. Requirements Perform final quality inspections on all serviced vehicles before release. Verify all lug nuts are present, undamaged, and torqued to manufacturer specifications. Inspect oil pan drain plug and oil filter housing for proper installation and leaks. Use proper tools and PPE, ensuring torque wrenches and inspection equipment are calibrated. Document inspection results using the QC Inspection Checklist for each vehicle. Red-tag and report any failed inspections or safety concerns immediately to the Shop Foreman or Service Manager. Record all corrective actions and re-inspect vehicles after repairs. Ensure all completed checklists are signed, dated, and attached to the Repair Order. Coordinate with Service Advisors and Cashiers to verify QC completion before vehicle delivery. Maintain consistent adherence to Bert Ogden Auto Group's safety and quality standards. Remain available during all shop hours and ensure coverage during absences. Uphold zero tolerance for missed inspections or critical safety errors. QUALIFICATIONS Ability to work efficiently in a fast-paced environment. Advanced knowledge of vehicle maintenance procedures. Effective communication skills with customers and team members. EDUCATION and/or EXPERIENCE Strong attention to detail and organizational skills. Proficiency in using torque wrenches and inspection tools. Ability to accurately complete documentation and follow processes. Effective communication with technicians, service advisors, and management. PHYSICAL DEMANDS & WORK ENVIRONMENT Ability to stand, bend, and move under vehicles for extended periods. Must be able to lift up to 50 lbs. safely. Occasional lifting, standing, crawling, reaching, use of stairs. Occasional attendance at social gatherings. Ability to travel occasionally. CERTIFICATES, LICENSES, REGISTRATIONS Valid Texas Driver's License OTHER REQUIREMENTS Pass Background Check Pass Drug Test 21 Years-Old or Older EMPLOYMENT BENEFITS INCLUDE: Paid Vacation and Holidays 401(K) Vision Insurance Dental Insurance Medical Insurance

Full-time Description The QC Specialist is responsible for performing final quality inspections on all serviced vehicles to ensure they meet Bert Ogden Auto Group's safety and quality standards prior to customer delivery. This includes verifying proper torque of all lug nuts and confirming that the oil pan drain plug and oil filter housing are properly secured and free of leaks. The QC Specialist serves as the final checkpoint to guarantee that all vehicles are safe, compliant, and ready for release. Requirements Perform final quality inspections on all serviced vehicles before release. Verify all lug nuts are present, undamaged, and torqued to manufacturer specifications. Inspect oil pan drain plug and oil filter housing for proper installation and leaks. Use proper tools and PPE, ensuring torque wrenches and inspection equipment are calibrated. Document inspection results using the QC Inspection Checklist for each vehicle. Red-tag and report any failed inspections or safety concerns immediately to the Shop Foreman or Service Manager. Record all corrective actions and re-inspect vehicles after repairs. Ensure all completed checklists are signed, dated, and attached to the Repair Order. Coordinate with Service Advisors and Cashiers to verify QC completion before vehicle delivery. Maintain consistent adherence to Bert Ogden Auto Group's safety and quality standards. Remain available during all shop hours and ensure coverage during absences. Uphold zero tolerance for missed inspections or critical safety errors. QUALIFICATIONS Ability to work efficiently in a fast-paced environment. Advanced knowledge of vehicle maintenance procedures. Effective communication skills with customers and team members. EDUCATION and/or EXPERIENCE Strong attention to detail and organizational skills. Proficiency in using torque wrenches and inspection tools. Ability to accurately complete documentation and follow processes. Effective communication with technicians, service advisors, and management. PHYSICAL DEMANDS & WORK ENVIRONMENT Ability to stand, bend, and move under vehicles for extended periods. Must be able to lift up to 50 lbs. safely. Occasional lifting, standing, crawling, reaching, use of stairs. Occasional attendance at social gatherings. Ability to travel occasionally. CERTIFICATES, LICENSES, REGISTRATIONS Valid Texas Driver's License OTHER REQUIREMENTS Pass Background Check Pass Drug Test 21 Years-Old or Older EMPLOYMENT BENEFITS INCLUDE: Paid Vacation and Holidays 401(K) Vision Insurance Dental Insurance Medical Insurance

Job ID: R0117027 Company Name: HITACHI ENERGY USA INC Profession (Job Category): Quality Management Job Schedule: Full time Remote: No Job Description: About the Role We are seeking a 1st Shift OIP Quality Technician to join our Alamo, TN facility. In this position you will play a critical role throughout the manufacturing process, ensuring the highest standards of quality are maintained at every stage. From inspecting components before assembly to conducting root cause analyses, your expertise will help deliver products that meet or exceed customer expectations. Key Responsibilities Champion Hitachi Energy's core values of safety and integrity, fostering a safe, collaborative, and productive work environment. Use Differential Scanning Calorimeter (DSC) to measure the reactivity of uncured epoxy and report glass transition temperature. Understand use of and maintenance of a respirator. Use rheometer to measure plasticity of silicone. Measure weight and density of epoxy. Documenting and analyzing test results of various chemicals. Mix and handle various chemicals using proper PPE. Monitor the shelf life of various chemicals. Auditing, monitoring, and determining the quality of manufacturing processes and/or outputs against defined internal and regulatory standards. Reporting and troubleshooting manufacturing process deviations and defects in finished goods. Communicates information that requires some explanation or interpretation. Participate in supporting Operations and Engineering to identify the root cause and be an active participant in identifying the solution and helping the team implement and ensure that it followed rigorously. Required: High School diploma, associate's degree or combination of education and work experience. Proficiency in MS Office 365 (Excel, Word, PowerPoint); familiarity with SAP ERP is a plus. Work authorization to work for Hitachi Energy in the U.S. Preferred: Experience with tools like SharePoint, Power BI, and SAP. Quality Technician preferred 2 to 5 years' experience. Strong analytical and problem-solving abilities. (empty) Equal Employment Opportunity (EEO)-Females/Minorities/Protected Veterans/Individuals with Disabilities Protected veterans and qualified individuals with a disability may request a reasonable accommodation if you are unable or limited in your ability to use or access the Hitachi Energy career site as a result of your disability. You may request reasonable accommodations by completing a general inquiry form on our website. Please include your contact information and specific details about your required accommodation to support you during the job application process.This is solely for job seekers with disabilities requiring accessibility assistance or an accommodation in the job application process. Messages left for other purposes will not receive a response.

Full-time Description The QC Specialist is responsible for performing final quality inspections on all serviced vehicles to ensure they meet Bert Ogden Auto Group's safety and quality standards prior to customer delivery. This includes verifying proper torque of all lug nuts and confirming that the oil pan drain plug and oil filter housing are properly secured and free of leaks. The QC Specialist serves as the final checkpoint to guarantee that all vehicles are safe, compliant, and ready for release. Requirements Perform final quality inspections on all serviced vehicles before release. Verify all lug nuts are present, undamaged, and torqued to manufacturer specifications. Inspect oil pan drain plug and oil filter housing for proper installation and leaks. Use proper tools and PPE, ensuring torque wrenches and inspection equipment are calibrated. Document inspection results using the QC Inspection Checklist for each vehicle. Red-tag and report any failed inspections or safety concerns immediately to the Shop Foreman or Service Manager. Record all corrective actions and re-inspect vehicles after repairs. Ensure all completed checklists are signed, dated, and attached to the Repair Order. Coordinate with Service Advisors and Cashiers to verify QC completion before vehicle delivery. Maintain consistent adherence to Bert Ogden Auto Group's safety and quality standards. Remain available during all shop hours and ensure coverage during absences. Uphold zero tolerance for missed inspections or critical safety errors. QUALIFICATIONS Ability to work efficiently in a fast-paced environment. Advanced knowledge of vehicle maintenance procedures. Effective communication skills with customers and team members. EDUCATION and/or EXPERIENCE Strong attention to detail and organizational skills. Proficiency in using torque wrenches and inspection tools. Ability to accurately complete documentation and follow processes. Effective communication with technicians, service advisors, and management. PHYSICAL DEMANDS & WORK ENVIRONMENT Ability to stand, bend, and move under vehicles for extended periods. Must be able to lift up to 50 lbs. safely. Occasional lifting, standing, crawling, reaching, use of stairs. Occasional attendance at social gatherings. Ability to travel occasionally. CERTIFICATES, LICENSES, REGISTRATIONS Valid Texas Driver's License OTHER REQUIREMENTS Pass Background Check Pass Drug Test 21 Years-Old or Older EMPLOYMENT BENEFITS INCLUDE: Paid Vacation and Holidays 401(K) Vision Insurance Dental Insurance Medical Insurance

Located in Harlingen, TX Salary: $10.00 Express Employment is now hiring a Quality Control for one of our clients in Harlingen, TX. Inspecting incoming raw material Must have some knowledge of basic math, and minimum computer skills Examine product for external and/or internal damage Must complete all reports on a timely basis Must be able to weigh products and keep an accurate count of product Keep documentation on the proper log sheets Must have previous Quality control experience Job Location: Harlingen, TX PAY: DOE. #2315ST Express Office: Brownsville 954 West Price Road Brownsville, TX 78520

Inspecting for quality: Checking for skin damage, temperature, hardness, and other factors that could affect the quality of the avocados Measuring ripeness: Taking temperature readings and measuring the stage of ripeness Inspecting containers: Checking the quality of containers that the avocados are packaged in Monitoring transport: Keeping track of the temperature of the avocados during transport Using software: Using software and barcode scanners to support the inspection process Reporting quality: Creating reports on the quality of the avocados, including any issues that are found Communicating: Working with the sales team to communicate quality issues and ensuring that customers receive high quality products Ensuring safety: Complying with safety policies and procedures, and keeping the work area clean and organized

Pure Hothouse Foods, marketed under the Pure Flavor brand, is a family of greenhouse vegetable growers who share a commitment to bringing A Life of Pure Flavor™ to communities everywhere. Our passion for sustainable greenhouse growing, strong support for our retail & foodservice customers, and focus on engaging consumers is built on a foundation drawn from generations of growing expertise. We are the next generation of vegetable growers, inspired to put quality, flavor, and customers first by providing greenhouse-grown vegetables from our farms that are strategically located throughout North America. With a dedicated, energetic and highly skilled workforce, we believe our employees make the difference. We offer our employees the opportunity to advance their careers in our progressive, vibrant organization. Job Summary: The Vegetable Inspector (QC) is responsible to assess and report on the quality of all vegetables received, in inventory, and shipped from the facility and ensures that all products shipped meet or exceed customer and regulatory requirements. Responsibilities: Ensure all loads of vegetables arriving at the facility are visually inspected; Perform outbound inspections on shipments Complete QC Inspection Reports for each arriving load, including distressed loads, or any load we deem necessary Ensure all inventory is assessed and is categorized according to its quality and condition Place and release quarantine/on-hold product Conduct outgoing quality checks and/or review the checks conducted by the shippers Regularly inspect finished product and packaging for adherence to standards, when requested or applicable Qualifications: Secondary school education or equivalent required; post secondary education, preferred Minimum (1) year experience as a Vegetable Inspector or Quality Inspector in produce or related industry, preferred Knowledge of Good Manufacturing Practices, Health and Safety, and Food Safety Basic understanding of Fresh Fruit & Vegetable regulations, plus Consumer Packaging & Labeling requirements and standards Computer skills (essential) Proven ability to work in a fast-paced environment, demonstrate keen attention to detail and task-related accuracy Strong verbal and written communication skills Other core expectations as defined by the company Work Environment: Hours of work may vary depending on business needs; flexibility is required This job operates within a refrigerated warehouse, where temperatures range from 45-55°F. The noise level in the work environment can be loud due to packaging machinery, and forklift truck operation. The employee frequently is required to stand; walk; bend; twist; use hands to handle or feel product or packaging; and reach with hands and arms. The position involves walking and lifting, regularly, up to 30-pounds, occasionally up to 50-pounds. Visual requirements. If you are looking for a challenging and rewarding career opportunity, submit your resume to Pure Hothouse Foods today! Pure Flavor Farms is committed to providing an accessible and barrier-free environment. Accommodations are available on request for candidates taking part in all aspects of the selection process. Please contact the Human Resources department if an accommodation is required. Check us out at or follow us on Facebook, Twitter, Instagram or LinkedIn.

GENERAL DESCRIPTION OF POSITION: This position is vital in the health care delivery system. This is traditionally the patient's first clinical point of contact so patient relationship, management of patient care, management of patient information, team communication, demonstration of safer and professional conduct and activities using patient centered medical home principles, policies and procedures is critical. Always supports the vision and the mission of the Clinic. The Technician will perform Pediatric, Adult and Geriatric venipunctures, finger sticks, and heel sticks as ordered by the Provider. Will perform routine and special laboratory tests procedures without supervision and as described in the Laboratory procedure manual; will maintain accurate laboratory records and make available for inspections /audits by Lab Supervisor, Lab Director, Lab Consultant and CLIA Surveyors. Performs necessary quality controls; participates in proficiency testing program and maintains lab instruments as indicated by manufacturer recommendations. This position requires weekend rotations; evening coverage as needed. ESSENTIAL JOB FUNCTIONS: (with or without accommodations) Patient relationships: Will greet and welcome the patient in a pleasant, respectful, culturally and linguistically appropriate manner. Arrive patients and complete the lab visit in EMR system, following established lab workflows (SOP). Assure all patient questions are answered in a positive and cordial manner. Assures the patient has a clear understanding of all communications. Ensures lab orders are verified and ready for patients with a lab appointment; remind the patient of the importance of keeping the appointment and/or communicating any changes. Management of patient care: Collects appropriate specimens for testing and instructs patients on specimen collection. Completes lab orders in EMR for all tests requested and collected; Prepare and process specimens that are sent out to reference laboratories when necessary; performs patient testing and reporting as described in the Laboratory Manual. Performs routine tests with accuracy and precision under minimal/no supervision. Follows established SOP when transcribing in-house lab results electronically; tracts, reconcile and reviews lab reports daily or as needed: follows policies in place for priority and panic value reporting. Management of patient information: Delivers panic lab results to ordering or assigned provider with log. Performs quality control measures to validate test results and monitor QC data and participate in an external proficiency testing program. Will keep and maintain all laboratory records and controls on file for 2 years. Organize and upkeep QC records for monthly review. Adheres to all HIPAA regulations in and outside of the Clinic; Communicates patient information as requested to enhance patient services. Team communication: Participates in department huddles. Approaches patient care as a team involving clinical and non-clinical staff (eg. Physicians, mid-levels, educators, appointments staff) to achieve patient care objectives. Inform Supervisor of supplies needed and /or orders supplies as needed. Demonstration of safer and professional conduct: Calibrates instruments where applicable, maintains instruments following manufacturer recommendations/ troubleshooting procedures. Keeps work area clean and disinfected daily. Records temperature reading daily for control devices; participates in continuing education and attends required meetings. Submits require credential documents in a timely manner (license, certification, etc.). Maintain a friendly and safe environment for self and others. Will refrain from texting and speaking on cell phone while on duty. Attends work on a regular and predictable schedule in accordance with clinic leave policy. Refrain from informal communication with patients and others. Responsible for our own safety as well as the safety of others. Utilizes PPE and maintains safety measures; follows guidelines in effect. POSITION DIRECTLY SUPERVISED: None

We at Bestica believe our success is a direct result of hard work and outstanding employee dedication. Our environment is dynamic, friendly, and collaborative. We foster a positive culture, where innovation and synergy are encouraged to build our workplace into a community of like-minded, passionate people. Bestica is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. If this opportunity aligns with your capabilities and career desires, please take a moment to visit our website at ****************

JOB AD: Laboratory Technician Aspen Medical has an exciting opportunity for Lab Techs to partner with us in providing quality medical care to patients within a transitional setting. Lab Techs, alongside fellow team members, will be fully entrusted to ensure that the utmost competent care and safety is consistently delivered with compassion to the patient population. The medical teams will be located within a secure medical facility, where such services include, but are not limited to the following: Medical Screening (New Arrivals) Comprehensive Screening Sick Call 24-Hour Emergency Medical and Mental Health Treatment Women's Medical Care Aspen Medical will provide additional EMS, Diagnostic and Laboratory, and other ancillary services. All clinic service delivery services will be provided in accordance with US clinical standards and compliance measures. Citizenship: *All Aspen Medical staff must be US citizens or Green Card holders. Sponsorship will not be available . Requirements: Education: Successful completion of a full-time training course of approximately a year's duration in a medical or clinical laboratory assistant (or technician), or successful completion of an associate degree course of study of which the 2nd year of the 2-year program included successful completion of a training course of approximately a year's duration in a certified laboratory assistant school approved by a nationally recognized accrediting agency that included instruction in chemistry, hematology, blood banking, and microbiology (including serology), or Bachelor's degree of Medical Laboratory Science (or equivalent) in which the program included instruction in chemistry, hematology, blood banking, and microbiology (including serology) Certification: Current, valid certification from American Medical Technologist (AMT) or American Society of Clinical Pathology - Board of Certification (ASCP-BOC) as a Medical Laboratory Technologist (MLT), Medical Laboratory Scientist (MLS), or Clinical Laboratory Technician (CLT) is preferred Current, valid American Heart Association certification in Basic Life Support (BLS) License/Registration/Certificate: Current, valid, and unrestricted license or registration from a State, the District of Columbia, the Commonwealth of Puerto Rico, or a territory of the United States is preferred Experience: A minimum of one year of recent, relevant, related experience Language Proficiency: Fluency in Spanish is highly desired but not required *Pay rate details and associated work schedules will be outlined during the interview phase. Aspen Medical is committed to a diverse and inclusive workplace. We are an equal opportunity employer, and Aspen Medical does not discriminate based on race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. For individuals with disabilities who would like to request accommodation, please contact [email protected]. By joining Aspen Medical, you will join a responsive mission-driven organization where you will be a vital member of a small, dynamic team supported by a large international corporation.

MUST UPLOAD HS DIPLOMA/GED , TX DRIVERS LICENSE AND RESUME REQUIRED: * High School Diploma or General Equivalency Diploma (GED) in English, * A current Texas driver's license and an acceptable driving record are required. * One (1) year progressive experience in television production, transmission/broadcasting and/or engineering. PREFERRED: Associate's Degree with specialization in Television Production Telecommunications, Media, Radio and Television Broadcasting, Computer Science, Photography, or related area preferred. DUTIES AND RESPONSIBILITIES: Produces educational, instructional or informational videos using professional broadcast equipment. Assists in production of live and recorded television programming. Serves as Technical Director, Character Generator, Audio Director, Videographer/Photographer and/or Video Operator as needed. Insures the proper transmission signal as required by the Cable Operator. Maintains a continuous audio and video signal for KBSD. Prepares all television production equipment, such as cameras, lighting, microphones and other equipment as required for field and in-house productions. Creates/designs program appropriate sets and lighting. Builds and maintains a variety of sets and props. Performs preventative and minor equipment maintenance. Strives continually to promote the safety, health and comfort of students and employees in the performance of duties. Drives District vehicles to and from work sites; obeys all traffic laws. Follows established safety procedures and techniques to perform job duties. Maintains confidentiality. Maintains a high level of ethical behavior as is expected of all District employees. Maintains professional growth by attending in-service and meetings as requested/required. Performs any other duties as assigned by the Supervisor/Director.

Quality Inspector Job Responsibilities: Inspects and approves incoming as well as Finish Goods materials by confirming specifications, conducting visual and measurement tests, and rejecting and returning unacceptable materials. Approves finished products by confirming specifications, conducting visual and measurement tests, returning products for re-work as required, and confirming re-work when necessary. Participates in Containment Activities Documents inspection results by completing reports and logs, summarizes re-work and scrap, and inputs data into quality database. Keeps measurement equipment operating by following operating instructions and calibration requirements and calling for repairs as required. Maintains safe and healthy work environment by following standards and procedures and complying with legal regulations. Updates job knowledge by participating in cross training opportunities and keeping up-to-date by reading technical publications. Accomplishes quality and organization mission by completing related results as needed. Quality Inspector Qualifications/Skills: Written and verbal communication skills Basic math skills Basic computer skills Attention to detail Analytic skills Documentation skills Hand/eye coordination Reporting skills Blueprint reading Education and Experience Requirements: High school diploma Experience with quality control techniques Experience with measuring devices such as meters, gauges, computers, calipers, and other measuring instruments One to two years' quality inspector experience First Brands Group is a proud equal opportunity employer. We are deeply committed to building a workplace and global community where inclusion is valued. Employment decisions at FBG are based on business needs, job requirements and individual qualifications, without regard to race, color, religion, or belief, national, social, or ethnic origin, sex, or age. All qualified applicants will be considered for employment without regard to the above forementioned as well as, gender, gender identity family/marital status, sexual orientation, national origin, age, past or present military veteran status, or any other non-merit based or legally protected grounds. FBG will not tolerate discrimination or harassment based on any of these grounds or characteristics.

Full-time Description The QC Specialist is responsible for performing final quality inspections on all serviced vehicles to ensure they meet Bert Ogden Auto Group's safety and quality standards prior to customer delivery. This includes verifying proper torque of all lug nuts and confirming that the oil pan drain plug and oil filter housing are properly secured and free of leaks. The QC Specialist serves as the final checkpoint to guarantee that all vehicles are safe, compliant, and ready for release. Requirements Perform final quality inspections on all serviced vehicles before release. Verify all lug nuts are present, undamaged, and torqued to manufacturer specifications. Inspect oil pan drain plug and oil filter housing for proper installation and leaks. Use proper tools and PPE, ensuring torque wrenches and inspection equipment are calibrated. Document inspection results using the QC Inspection Checklist for each vehicle. Red-tag and report any failed inspections or safety concerns immediately to the Shop Foreman or Service Manager. Record all corrective actions and re-inspect vehicles after repairs. Ensure all completed checklists are signed, dated, and attached to the Repair Order. Coordinate with Service Advisors and Cashiers to verify QC completion before vehicle delivery. Maintain consistent adherence to Bert Ogden Auto Group's safety and quality standards. Remain available during all shop hours and ensure coverage during absences. Uphold zero tolerance for missed inspections or critical safety errors. QUALIFICATIONS Ability to work efficiently in a fast-paced environment. Advanced knowledge of vehicle maintenance procedures. Effective communication skills with customers and team members. EDUCATION and/or EXPERIENCE Strong attention to detail and organizational skills. Proficiency in using torque wrenches and inspection tools. Ability to accurately complete documentation and follow processes. Effective communication with technicians, service advisors, and management. PHYSICAL DEMANDS & WORK ENVIRONMENT Ability to stand, bend, and move under vehicles for extended periods. Must be able to lift up to 50 lbs. safely. Occasional lifting, standing, crawling, reaching, use of stairs. Occasional attendance at social gatherings. Ability to travel occasionally. CERTIFICATES, LICENSES, REGISTRATIONS Valid Texas Driver's License OTHER REQUIREMENTS Pass Background Check Pass Drug Test 21 Years-Old or Older EMPLOYMENT BENEFITS INCLUDE: Paid Vacation and Holidays 401(K) Vision Insurance Dental Insurance Medical Insurance

Job ID: R0117024 Company Name: HITACHI ENERGY USA INC Profession (Job Category): Quality Management Job Schedule: Full time Remote: No Job Description: We are seeking a 3rd Shift OPD Quality Technician to join our Alamo, TN facility. In this position you will play a critical role throughout the manufacturing process, ensuring the highest standards of quality are maintained at every stage. From inspecting components before assembly to conducting root cause analyses, your expertise will help deliver products that meet or exceed customer expectations. Key Responsibilities Champion Hitachi Energy's core values of safety and integrity, fostering a safe, collaborative, and productive work environment. Use Differential Scanning Calorimeter (DSC) to measure the reactivity of uncured epoxy and report glass transition temperature. Understand use of and maintenance of a respirator. Use rheometer to measure plasticity of silicone. Measure weight and density of epoxy. Documenting and analyzing test results of various chemicals. Mix and handle various chemicals using proper PPE. Monitor the shelf life of various chemicals. Auditing, monitoring, and determining the quality of manufacturing processes and/or outputs against defined internal and regulatory standards. Reporting and troubleshooting manufacturing process deviations and defects in finished goods. Communicates information that requires some explanation or interpretation. Participate in supporting Operations and Engineering to identify the root cause and be an active participant in identifying the solution and helping the team implement and ensure that it followed rigorously. Required: High School diploma, associate's degree or combination of education and work experience. Proficiency in MS Office 365 (Excel, Word, PowerPoint); familiarity with SAP ERP is a plus. Work authorization to work for Hitachi Energy in the U.S. Preferred: Experience with tools like SharePoint, Power BI, and SAP. Quality Technician preferred 2 to 5 years' experience. Strong analytical and problem-solving abilities. Equal Employment Opportunity (EEO)-Females/Minorities/Protected Veterans/Individuals with Disabilities Protected veterans and qualified individuals with a disability may request a reasonable accommodation if you are unable or limited in your ability to use or access the Hitachi Energy career site as a result of your disability. You may request reasonable accommodations by completing a general inquiry form on our website. Please include your contact information and specific details about your required accommodation to support you during the job application process.This is solely for job seekers with disabilities requiring accessibility assistance or an accommodation in the job application process. Messages left for other purposes will not receive a response.

Pure Hothouse Foods, marketed under the Pure Flavor brand, is a family of greenhouse vegetable growers who share a commitment to bringing A Life of Pure Flavor™ to communities everywhere. Our passion for sustainable greenhouse growing, strong support for our retail & foodservice customers, and focus on engaging consumers is built on a foundation drawn from generations of growing expertise. We are the next generation of vegetable growers, inspired to put quality, flavor, and customers first by providing greenhouse-grown vegetables from our farms that are strategically located throughout North America. With a dedicated, energetic and highly skilled workforce, we believe our employees make the difference. We offer our employees the opportunity to advance their careers in our progressive, vibrant organization. Job Summary: The is responsible to assess and report on the quality of all vegetables received, in inventory, and shipped from the facility and ensures that all products shipped meet or exceed customer and regulatory requirements. Responsibilities: Ensure all loads of vegetables arriving at the facility are visually inspected; Perform outbound inspections on shipments Complete QC Inspection Reports for each arriving load, including distressed loads, or any load we deem necessary Ensure all inventory is assessed and is categorized according to its quality and condition Place and release quarantine/on-hold product Conduct outgoing quality checks and/or review the checks conducted by the shippers Regularly inspect finished product and packaging for adherence to standards, when requested or applicable Qualifications: Secondary school education or equivalent required; post secondary education, preferred Minimum (1) year experience as a Vegetable Inspector or Quality Inspector in produce or related industry, preferred Knowledge of Good Manufacturing Practices, Health and Safety, and Food Safety Basic understanding of Fresh Fruit & Vegetable regulations, plus Consumer Packaging & Labeling requirements and standards Computer skills (essential) Proven ability to work in a fast-paced environment, demonstrate keen attention to detail and task-related accuracy Strong verbal and written communication skills Other core expectations as defined by the company Work Environment: Hours of work may vary depending on business needs; flexibility is required This job operates within a refrigerated warehouse, where temperatures range. The noise level in the work environment can be loud due to packaging machinery, and forklift truck operation. The employee frequently is required to stand; walk; bend; twist; use hands to handle or feel product or packaging; and reach with hands and arms. The position involves walking and lifting, regularly, up to 30-pounds, occasionally up to 50-pounds. Visual requirements. If you are looking for a challenging and rewarding career opportunity, submit your resume to Pure Flavor today! Pure Flavor is committed to providing an accessible and barrier-free environment for all individuals, including candidates and employees. We are an equal opportunity employer and comply with all applicable accessibility and accommodation legislation, including the Accessibility for Ontarians with Disabilities Act (AODA) in Canada and the Americans with Disabilities Act (ADA) in the United States. Accommodations are available upon request for candidates participating in all aspects of the selection process. If you require accommodation, please contact our Human Resources department. Check us out at ******************* or follow us on Facebook, Twitter, Instagram or LinkedIn.