Quality control technician jobs in Lawton, OK

Details Gross Rate up to $3,602 per week Department: Associate Travel Program - Cardiac Cath Lab Schedule: Multiple Shifts available, 40 hours per week Hospital: Multiple Ascension acute care hospitals Location: Local and national travel options are available dependent on need. This position is a permanent, full time position made up of 8-13 week assignments - not a short term option or temporary contract. Ability to extend as needed. Benefited positions available, rate changes will apply. For more information about the internal Ascension Travel Program, please visit our site. Benefits Paid time off (PTO) Various health insurance options & wellness plans Retirement benefits including employer match plans Long-term & short-term disability Employee assistance programs (EAP) Parental leave & adoption assistance Tuition reimbursement Ways to give back to your community Benefit options and eligibility vary by position. Compensation varies based on factors including, but not limited to, experience, skills, education, performance, location and salary range at the time of the offer. Responsibilities Assist with procedures to analyze, diagnose and treat the cardiovascular system. Prepare patients for procedures. Review medical history, position patient and clean/shave/numb testing sites as appropriate. Interpret, describe and report test results; recognize recording errors and artifacts and react appropriately. Monitor patient prior to, during and after procedure and promptly report any abnormal findings in patient's condition. Prepare and maintain equipment, supplies and lab area. Ensure equipment is properly functioning. Report potential problems or equipment malfunction to appropriate personnel. Lock/tag out equipment if appropriate. Assist in maintaining a clean, and orderly department. Requirements Licensure / Certification / Registration: BLS Provider obtained within 1 Month (30 days) of hire date or job transfer date required. American Heart Association or American Red Cross accepted. One or more of the following required: Registered Cardiovascular Invasive Specialist credentialed from the Cardiovascular Credentialing International (CCI) obtained prior to hire date or job transfer date. Cardiographic Tech credentialed from the Cardiovascular Credentialing International (CCI) obtained prior to hire date or job transfer date. Radiologic Technologist specializing in Radiography credentialed from the American Registry of Radiologic Technologists (ARRT) obtained prior to hire date or job transfer date. Cardiac Sonographer credentialed from the American Registry for Diagnostic Medical Sonography (ARDMS) obtained prior to hire date or job transfer date. Advanced Life Support preferred. American Heart Association or American Red Cross accepted. Approved Local Exception preferred. Education: High School diploma equivalency with 2 years of cumulative experience OR Associate's degree/Technical degree OR 4 years of applicable cumulative job specific experience required. Additional Preferences Additional Preferences: One year of Cath Lab experience. One year of recent experience as a Cardiovascular Technician Travelers must be willing to travel 50+ miles from permanent residence. Local and national travel options are available dependent on need. Candidates are stipend eligible for sites over 50+ miles from their permanent residence. Partner with Recruitment to learn more. #ATP Why Join Our Team Ascension associates are key to our commitment of transforming healthcare and providing care to all, especially those most in need. Join us and help us drive impact through reimagining how we can deliver a people-centered healthcare experience and creating the solutions to do it. Explore career opportunities across our ministry locations and within our corporate headquarters. Ascension is a leading non-profit, faith-based national health system made up of over 134,000 associates and 2,600 sites of care, including more than 140 hospitals and 40 senior living communities in 19 states. Our Mission, Vision and Values encompass everything we do at Ascension. Every associate is empowered to give back, volunteer and make a positive impact in their community. Ascension careers are more than jobs; they are opportunities to enhance your life and the lives of the people around you. Equal Employment Opportunity Employer Ascension provides Equal Employment Opportunities (EEO) to all associates and applicants for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity or expression, pregnancy, childbirth, and related medical conditions, lactation, breastfeeding, national origin, citizenship, age, disability, genetic information, veteran status, marital status, all as defined by applicable law, and any other legally protected status or characteristic in accordance with applicable federal, state and local laws. For further information, view the EEO Know Your Rights (English) poster or EEO Know Your Rights (Spanish) poster. As a military friendly organization, Ascension promotes career flexibility and offers many benefits to help support the well-being of our military families, spouses, veterans and reservists. Our associates are empowered to apply their military experience and unique perspective to their civilian career with Ascension. Please note that Ascension will make an offer of employment only to individuals who have applied for a position using our official application. Be on alert for possible fraudulent offers of employment. Ascension will not solicit money or banking information from applicants. E-Verify Statement This employer participates in the Electronic Employment Verification Program. Please click the E-Verify link below for more information. E-Verify

Lincoln Electric Product Co. Inc. is seeking a motivated, dedicated, dynamic QC Technician I, you will play a critical role in ensuring the quality and reliability of our electrical distribution switchboards. You will be responsible for inspecting incoming materials, conducting in-process quality checks, and performing final product testing. Your attention to detail and commitment to quality will help maintain our high standards. This full-time, exempt position reports directly to the QC Supervisor. *Working Conditions*: Manufacturing Floor Environment *Job Responsibilities:* · Verify incoming materials, components, and assemblies against specifications, engineering drawings, and purchase orders. * Conduct thorough visual inspections, dimensional checks, and functional tests on electrical components. * Inspect and verify the quality of incoming documentation, such as test reports and certificates of compliance. * Document inspection results, including any deviations or non-conformances, and report to the Quality Manager. * Monitor production processes to ensure adherence to quality standards, engineering drawings, and work instructions. * Inspect wiring, connections, and terminations for accuracy, security, and compliance with electrical codes and wiring diagrams. * Verify the correct installation of components and assemblies. * Conduct functional tests on subassemblies, including voltage and current measurements, insulation resistance tests, and operational checks. * Identify and document any deviations or non-conformances and take immediate corrective action. * Perform comprehensive inspections of completed switchboards to ensure compliance with customer specifications and industry standards. * Verify electrical continuity, insulation resistance, and other performance parameters using appropriate testing equipment. * Conduct functional tests to ensure proper operation of all control and protection functions. * Inspect product labeling, wiring diagrams, and documentation for accuracy and completeness. * Identify and document any non-conformances and initiate appropriate corrective actions. * Maintain accurate and up-to-date inspection records, including inspection reports, test data sheets, and non-conformance reports. * Complete required quality reports and documentation, such as inspection reports, quality control plans, and process control charts. * Contribute to the development and improvement of quality procedures, work instructions, and inspection checklists. * Participate in root cause analysis and corrective action activities to identify and eliminate quality problems. * Identify opportunities for process improvement and suggest innovative solutions. * Collaborate with engineering, production, and procurement teams to implement corrective actions and prevent future quality issues. * Participate in quality audits and reviews to assess the effectiveness of the quality management system. *Skills, Requirements, and Specifications* * 0-1 years of quality control experience, preferably in the electrical switchboard or related manufacturing industry. * Proven experience in quality systems. * Strong understanding of electrical components, circuits, and switchboard assembly. * Ability to read and interpret electrical schematics, wiring diagrams, and engineering drawings. * Proficiency in using electrical testing equipment (e.g., megger, multimeter, oscilloscope). * Strong attention to detail and accuracy. * Good communication and interpersonal skills. * Ability to work independently and as part of a team. * Familiarity with quality management systems and standards (e.g., ISO 9001). * Experience with industry standards and codes (e.g., UL,NEC, IEC). * May involve travel to suppliers, customers, or other manufacturing locations * In-depth knowledge of switchboard manufacturing processes, components, and testing standards. * Familiarity with electrical testing equipment and protocols. * Proficiency on both spoken and written English is required. Pay: From $45,760.00 per year Benefits: * 401(k) * 401(k) matching * Dental insurance * Health insurance * Paid time off * Vision insurance Application Question(s): * Do you have the ability to accurately read electrical schematics, including identifying components, tracing circuits, and understanding wiring paths as required for QC duties? * Are you comfortable and experienced working with high-voltage electrical systems up to 600V? Work Location: In person

Introduction Experience the HCA Healthcare difference where colleagues are trusted, valued members of our healthcare team. Grow your career with an organization committed to delivering respectful, compassionate care, and where the unique and intrinsic worth of each individual is recognized. Submit your application for our Cardiac Cath Lab Tech Lead opening with HCA Houston Healthcare Northwest today and find out what it truly means to be a part of the HCA Healthcare team. Benefits HCA Houston Healthcare Northwest, offers a total rewards package that supports the health, life, career and retirement of our colleagues. The available plans and programs include: Comprehensive medical coverage that covers many common services at no cost or for a low copay. Plans include prescription drug and behavioral health coverage as well as free telemedicine services and free AirMed medical transportation. Additional options for dental and vision benefits, life and disability coverage, flexible spending accounts, supplemental health protection plans (accident, critical illness, hospital indemnity), auto and home insurance, identity theft protection, legal counseling, long-term care coverage, moving assistance, pet insurance and more. Free counseling services and resources for emotional, physical and financial wellbeing 401(k) Plan with a 100% match on 3% to 9% of pay (based on years of service) Employee Stock Purchase Plan with 10% off HCA Healthcare stock Family support through fertility and family building benefits with Progyny and adoption assistance. Referral services for child, elder and pet care, home and auto repair, event planning and more Consumer discounts through Abenity and Consumer Discounts Retirement readiness, rollover assistance services and preferred banking partnerships Education assistance (tuition, student loan, certification support, dependent scholarships) Colleague recognition program Time Away From Work Program (paid time off, paid family leave, long- and short-term disability coverage and leaves of absence) Employee Health Assistance Fund that offers free employee-only coverage to full-time and part-time colleagues based on income. Learn more about Employee Benefits Note: Eligibility for benefits may vary by location. We are seeking a(an) Cardiac Cath Lab Tech Lead for our team to ensure that we continue to provide all patients with high quality, efficient care. Did you get into our industry for these reasons? We are an amazing team that works hard to support each other and are seeking a phenomenal addition like you who feels patient care is as meaningful as we do. We want you to apply! Job Summary and Qualifications We are seeking a Cardiac Cath Lab Radiology Technologist Lead for our facility to ensure that we continue to provide all patients with high quality, efficient care. We are an amazing team that works hard to support each other and we are seeking a phenomenal addition like you who feels patient care is as meaningful as we do. We want you to apply now! What You Will Do In Your Role: You will be responsible for assisting the R.N. in assessing, planning, implementing, and evaluating the care of the Cath Lab patient. You will be responsible to function in a call-out situation by scrubbing and running the table (x-ray). You will ensure archiving and storage of digital data and maintains proper operation of image review stations. You will perform post processing manipulation of digital data to supply physician with additional clinical data. You will be able to function in a Code Blue situation. What qualifications you will need: 1 year of experience in the field or in a related area Prior Cath Lab experience preferred Graduate of accredited school of Radiologic Technology required ARRT and Radiology Technologist through the Texas Department of Health or RCIS certification required. Current BCLS certification from the American Heart Association required. ACLS certification within 6 months of employment HCA Houston Healthcare Northwest is a 415+ bed acute care hospital that has been serving the north Houston communities for more than 40 years, providing a wide range of medical services including cardiology, maternity care, Level III NICU, pediatrics, bariatrics and neurology. We comprehensively serve our community by employing expert physicians, specialists, nurses and support staff who work together as a unified team to offer a range of diagnostic treatment and support services. From our 24-hour emergency department with Level II Trauma capabilities, to women's services, to cardiology, we are dedicated to improving the health of our community by delivering exceptional, personalized healthcare. We are members of HCA Houston Healthcare, the most comprehensive family of hospitals in the region and part of the leading provider of healthcare in the country, HCA Healthcare. Together we are stronger, smarter and more accessible in providing the patient-centered care you need close to home. HCA Healthcare has been recognized as one of the World's Most Ethical Companies by the Ethisphere Institute more than ten times. In recent years, HCA Healthcare spent an estimated $3.7 billion in cost for the delivery of charitable care, uninsured discounts, and other uncompensated expenses. "Across HCA Healthcare's more than 2,000 sites of care, our nurses and colleagues have a positive impact on patients, communities and healthcare. Together, we uplift and elevate our purpose to give people a healthier tomorrow."- Jane Englebright, PhD, RN CENP, FAAN Senior Vice President and Chief Nursing Executive If you find this opportunity compelling, we encourage you to apply for our Cardiac Cath Lab Tech Lead opening. We promptly review all applications. Highly qualified candidates will be directly contacted by a member of our team. We are interviewing apply today! We are an equal opportunity employer. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Cath Lab Tech - Rowlett, TX Pay : $66k -$96k Guaranteed hours : 40 Timings : 7am - 5pm Cath Lab Tech FT Days · $10K Sign on Bonus · Cardiovascular Invasive Specialists, Cath Lab Techs, CV Tech, Rad Techs welcomed)!! · ARRT or RCIS Certification required · 10 hour shifts - 4 days a week - On Call 10-13 days a month. Call includes weekends and holidays. JOB SUMMARY The Cardiovascular Invasive Specialist, under general supervision, helps Physicians during catheterization / electrophysiology lab procedures. Prepares room and equipment, instructs patients, monitors patient's condition and provides routine and emergency patient care during procedures. Contributes to the orientation and training of other team members. Help in daily, monthly, and or quarterly quality control initiative through auditing and reporting. QUALIFICATIONS EDUCATION - Associate's or 2 years of work experience above the minimum qualification EXPERIENCE - Less than 1 Year of Experience CERTIFICATION/LICENSE/REGISTRATION - ACLS (ACLS): ACLS within 30 days of hire/transfer. Basic Life Support (BLS): BLS within 30 days of hire/transfer. ARRT-R Radiography (ARRT-R), Cert Cardiac Device Spec (CCDS), Cert EP Specialist (CEPS), Medical Radiologic Tech (MRT), Reg Cardio Electrophysiology (RCES), Reg Cardiovascular Invasive Sp (RCIS): Must meet one of the following: American Registry of Radiologic Tech(ARRT-R) and MRT thru TX Medical Board, or Cardio Invasive Spec(RCIS), or Reg Cardiac Electro Spec(RCES), or Cert Electro Spec(CEPS), or Cert Cardiac Device Spec (CCDS). Steven Paul Health Care Lead P: ************** E: *************************** Minisoft Technologies LLC

Job Posting Start Date 11-28-2025 Job Posting End Date 01-30-2026Flex is the diversified manufacturing partner of choice that helps market-leading brands design, build and deliver innovative products that improve the world.A career at Flex offers the opportunity to make a difference and invest in your growth in a respectful, inclusive, and collaborative environment. If you are excited about a role but don't meet every bullet point, we encourage you to apply and join us to create the extraordinary.Job Summary Summary: The “Quality Technician” will be based in ……., reporting to …… In charge of performing product inspection and/or audits of quality control programs, first article inspections and calibration, inspecting flat blank layouts, out of box audit (OBA) and sampling and testing of incoming components and raw materials. Purge material. Ensures raw materials, in process and finished products meet company standards. General documentations updated (Quality alerts). SHIFT: H - 6:00pm-6:00am Wed, Thur, Fri ,every other Sat (20% Diff) Responsibilities: Audits processes, tests and inspects products and/or develops, compiles and evaluates statistical data to define and maintain quality and reliability of products. Working from engineering drawings, specifications, schematics, diagrams, written descriptions, layouts or defined plans to perform complex engineering testing, checkout, First Article Inspection, root cause research, internal corrective actions and supplier correction actions. Interprets engineering drawings, schematic diagrams or formulas and confers with management or engineering staff to define quality and reliability standards. Selects processes to be audited from primarily the manufacturing areas and checks for a variety of features, including ESD (electro-static discharge) and handling practices, documentation, training and process integrity. Selects products for audits at specified stages in the production or post-production process, and tests products for variety of qualities such as dimensions, performance and mechanical, electrical or cosmetic characteristics. Records audit data, applying statistical quality control procedures. Evaluates data and writes reports to validate or indicate deviations from existing standards. Recommends modifications of existing quality or production standards, programs or reports to achieve optimum quality within limits of equipment capability. Perform calibration on inspection tools e.g. micrometers, calipers height gages etc. Maintain gage track program, print list of gages due for calibration in the beginning of each month and follow up with calibration. Send gages out for calibration, maintain calibration records. Prepares graphs or charts of data or enters data into computer for research data. Download quality information from quality system to be used for QA reports. Research for engineering test results and implements process changes to resolve problems. Performs out of box audits (OBA) as required. Provides factory hold up to identify and resolve issues associated with purchased parts, materials and manufacturing. May be required to perform receiving inspection. Review at the beginning of the shift the Quality Auditors assistance and validated the Check List. Scrap disposition at MRB in less than 24 hours. Assure that the Customer implementation activities are in place. Meet the SSYMA requirements (boats, goggles, gloves, ear plugs). Review the SPC data and confirm the actions are effective. Validate the tooling and gauges are working properly (microscope, magnifier, etc). Qualifications: Requires a High School Diploma or equivalent, technical training, or equivalent experience. Typically requires 1 year of related experience. What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Job CategoryQuality Is Sponsorship Available? NoFlex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first).

IS LOCATED IN COLUMBUS, TX Titan offers: Competitive pay Medical benefits available on day one (1) of your employment 10paid vacation days, 10 paid holidays 3 paid personal days 401(K) Great working environment Position Summary: Performs various auditing functions of established procedures and processes throughout the organization to ensure compliance. Coordinates the adjustment of procedures/processes, as necessary, to facilitate continuous improvement, efficiency and productive gains. Responsible for understanding and supporting corporate Quality Assurance policy. Job Description: Schedules, coordinate and performs regular audits of department procedures and processes Work with department personnel to document procedures and process Ability to document, track, and communicate audit findings to the appropriate department head and Quality Manager Schedules and coordinates vendor and sub-contractor audits and reviews Responsible for reviewing component or system failures and facilitating requires process/procedure changes to correct future failures Prepares written reports of all audits accomplished Responsible for interpreting, supporting and communicating Quality Assurance policy, processes, and procedures published by the Quality function Performs in-process inspections on most types of fabrication, welding and assembly of pressure vessels, piping, structural steel and production equipment Interprets drawings, customer specifications and standards of moderate complexity Addresses quality issues related to non-conforming material or components, and obtain timely disposition to maintain production flow Has comprehensive knowledge of ASME, ANSI, ASNT, ASTM, AWS, NACE, API, ASIC and SSPC national codes Possesses basic computer knowledge Maintains an attitude conducive to progress through positive change, continuous improvement, and an active contribution to the teamwork concepts. Excellent communication skills Required Test: None Preferred Education and Experience: High school diploma or equivalent or equal combination of education and experience Five (5) years related experience and/or training; technical school or on the job training and AWS - Certified Weld Inspector or; Ten (10) years related experience and/or training, technical school or on the job training with no CWI Physical Strain: Lifting up to 50 pounds with frequent lifting and/or carrying objects weighing up to 30 pounds Bending, squatting, climbing, pulling, stooping, twisting, reaching, working at elevated heights Must be able to work under pressure

JobID: 210694079 JobSchedule: Full time JobShift: : Join our team to play a pivotal role in mitigating tech risks and upholding operational excellence, driving innovation in risk management. As a Tech Risk & Controls Lead in [Insert LOB and/or Sub LOB], you will be responsible for identifying, and mitigating compliance and operational risks in line with the firm's standards. You will also provide subject matter expertise and technical guidance to technology-aligned process owners, ensuring that implemented controls are operating effectively and in compliance with regulatory, legal, and industry standards. By partnering with various stakeholders, including Product Owners, Business Control Managers, and Regulators, you will contribute to the reporting of a comprehensive view of technology risk posture and its impact on the business. Your advanced knowledge of risk management principles, practices, and theories will enable you to drive innovative solutions and effectively manage a diverse team in a dynamic and evolving risk landscape. Job responsibilities * Ensure effective identification, quantification, communication, and management of technology risk, focusing on root cause analysis and resolution recommendations * Develop and maintain robust relationships, becoming a trusted partner with LOB technologists, assessments teams, and data officers to facilitate cross-functional collaboration and progress toward shared goals * Execute reporting and governance of controls, policies, issue management, and measurements, offering senior management insights into control effectiveness and inform governance work * Proactively monitor and evaluate control effectiveness, identify gaps, and recommend enhancements to strengthen risk posture and regulatory compliance Required qualifications, capabilities, and skills * 5+ years of experience or equivalent expertise in technology risk management, information security, or related field, emphasizing risk identification, assessment, and mitigation * Familiarity with risk management frameworks, industry standards, and financial industry regulatory requirements * Proficient knowledge and expertise in data security, risk assessment & reporting, control evaluation, design, and governance, with a proven record of implementing effective risk mitigation strategies * Demonstrated ability to influence executive-level strategic decision-making and translating technology insights into business strategies for senior executives Preferred qualifications, capabilities, and skills * CISM, CRISC, CISSP, or similar industry-recognized risk and risk certifications are preferred

Job Description Knapheide Installation Center in Red Oak, TX is looking to hire a Quality Technician II to manage the Quality Control auditing process, ensuring completed products meet Knapheide quality standards for form, fit, and function. This full-time position works Monday - Friday from 7:00 AM - 4:00 PM. At Knapheide, you're more than an employee. You're part of a family filled with multi-generation employees who take pride in the work they do. Knapheide has been in business since 1848 and is the premier work truck equipment, accessory, and commercial upfit provider in the United States. BENEFITS & PERKS Paid time off Paid holidays, including Black Friday and Christmas Eve 401(k) with 7% company contribution, once eligible Medical, dental, and vision insurance Employer paid life insurance DAY TO DAY AS A QUALITY TECHNICIAN As a Quality Technician II, you'll investigate quality issues, determine root cause and initiate corrective action. You'll communicate quality issues throughout the organization in order to prevent further occurrences. You'll supervise and train Quality Technicians on Knapheide quality standards and maintain the Knapheide Weld Program including weld training, certifications, and auditing. To be successful in this role, you'll need excellent communication skills and the ability to organize and prioritize job duties in order to meet deadlines. This role reports to the General Manager and the Knapheide Truck Equipment Center (KTEC) Quality Manager. Limited travel may be required. OUR IDEAL CANDIDATE Career-minded - looking for more than a job Team player - gets along well with others Organized & attentive to detail - nothing gets by you without being double-checked Efficient - a knack for effectively prioritizing tasks and managing your time REQUIREMENTS High School Diploma or GED Equivalent; Associates or Bachelor's Degree preferred Previous experience working in a Quality role preferred Ability to lift/move up to 75 pounds If you're someone who never settles for second best, takes pride in the work you do, and you're looking for a jump start on a new career, apply today!

Crusoe's mission is to accelerate the abundance of energy and intelligence. We're crafting the engine that powers a world where people can create ambitiously with AI - without sacrificing scale, speed, or sustainability. Be a part of the AI revolution with sustainable technology at Crusoe. Here, you'll drive meaningful innovation, make a tangible impact, and join a team that's setting the pace for responsible, transformative cloud infrastructure. About This Role: As our Quality Control Technician focused on switchboard testing, you will be instrumental in guaranteeing the quality and operational readiness of the electrical distribution systems that power our cutting-edge AI infrastructure. You will be responsible for executing comprehensive testing protocols for switchboard assemblies at various stages of production. Your understanding of electrical testing principles, safety regulations, and switchgear functionality will be essential in identifying and mitigating potential issues before deployment. This role requires a proactive and detail-oriented individual with strong analytical and problem-solving skills, coupled with a solid background in electrical testing and quality control within a manufacturing environment. You will collaborate closely with engineering and production teams to ensure adherence to specifications and maintain the highest levels of product quality. This is a full-time position where your expertise will directly impact the reliability and safety of our mission-critical infrastructure. What You'll Be Working On: Switchboard Testing and Inspection: Execute comprehensive testing procedures for switchboard assemblies, including but not limited to visual inspections, electrical continuity tests, insulation resistance tests, functional tests, and operational checks. Test Procedure Execution: Follow detailed test procedures and checklists to ensure consistent and thorough evaluation of switchgear performance against engineering specifications and industry standards. Electrical Testing and Verification: Execute electrical testing procedures, including continuity testing, insulation resistance testing, functional testing, and other relevant electrical tests to ensure switchboard meets performance specifications and safety requirements, energized functionality testing. Test Equipment Management: Ensure that all electrical testing equipment is properly calibrated, maintained, and operated according to safety guidelines. Test Equipment Operation and Maintenance: Proficiently operate various electrical testing equipment (e.g., multimeters, megohmmeters, Hi-Pot testers) and ensure proper calibration and maintenance of this equipment. Data Acquisition and Reporting: Accurately record and document test data, identifying trends, discrepancies, and potential failure points. Generate clear and concise test reports summarizing findings. Non-Conformance Reporting: Document any test failures or non-conformances, and collaborate with engineering and production teams to support root cause analysis and the implementation of effective corrective and preventive actions. Quality Standards and Compliance: Ensure all testing activities adhere to relevant industry standards, safety regulations (e.g., NEC, NFPA 70E, UL 891, IEEE, ANSI), and internal quality management system requirements. Cross-Functional Collaboration: Work closely with electrical engineering, manufacturing, and quality assurance teams to resolve testing issues, provide feedback on design for testability, and contribute to continuous improvement initiatives. Training and Guidance: Provide training and guidance to production personnel on basic quality checks and testing procedures related to switchgear assemblies. Documentation Control: Maintain accurate and organized records of all test procedures, test results, and calibration records. Other Duties: Undertake other quality-related tasks and projects as assigned to support overall operational efficiency and quality objectives. What You'll Bring to the Team: Education: Minimum High School graduate or GED; Associate's or Bachelor's degree in Electrical Engineering Technology or a related field is preferred, and equivalent field experience will be considered. Experience: Minimum of five years' experience in electrical testing and quality control roles, with a strong focus on testing medium and/or low voltage switchgear assemblies. Electrical Testing Knowledge: Thorough understanding of electrical testing principles, methodologies, and safety practices. Switchboard Familiarity: Comprehensive knowledge of switchgear components, functionality, and relevant industry standards (e.g., NEC, NFPA 70E, UL 891, IEEE, ANSI). Technical Proficiency: Demonstrated ability to interpret and understand electrical schematics, wiring diagrams, and technical specifications. Test Equipment Expertise: Hands-on experience operating and maintaining various electrical testing equipment. Computer Skills: Proficient in basic computer applications, including Google Suite (mail, drive, docs, sheets) and Microsoft Office (Word and Excel). Physical Requirements: Ability to perform physical tasks associated with testing and inspection, including standing, walking, bending, and lifting components as needed. Requires good manual dexterity and visual acuity for detailed inspection and operation of test equipment. Safety & Compliance: Willingness to strictly adhere to all safety regulations and participate in required safety training programs. This position is located in a safety-sensitive facility and may require participation in drug and alcohol programs. Company Values Alignment: Your personal values resonate with Crusoe's core principles. Soft Skills: Exceptional attention to detail and a strong commitment to electrical safety and product reliability. Excellent analytical and problem-solving skills for diagnosing and resolving electrical issues. Strong communication and interpersonal skills to effectively collaborate with cross-functional teams. Bonus Points: Certifications related to electrical testing or quality control (e.g., NETA certification). Experience with automated testing systems. Knowledge of data acquisition and analysis software. Experience in a manufacturing environment with high-reliability electrical equipment. Familiarity with root cause analysis and corrective action processes for electrical failures. Benefits: Hybrid work schedule Industry competitive pay Restricted Stock Units in a fast growing, well-funded technology company Health insurance package options that include HDHP and PPO, vision, and dental for you and your dependents Employer contributions to HSA accounts Paid Parental Leave Paid life insurance, short-term and long-term disability Teladoc 401(k) with a 100% match up to 4% of salary Generous paid time off and holiday schedule Cell phone reimbursement Tuition reimbursement Subscription to the Calm app MetLife Legal Company paid commuter benefit; $300/month Compensation Range Compensation will be paid in the range of up to $23 -$30/hr + Bonus. Restricted Stock Units are included in all offers. Compensation to be determined by the applicants knowledge, education, and abilities, as well as internal equity and alignment with market data. Crusoe is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.

We are creating devices that enable a bi-directional interface with the brain. These devices allow us to restore movement to the paralyzed, restore sight to the blind, and revolutionize how humans interact with their digital world. Team Description: Join our innovative Equipment Quality Team, a dynamic collective of experts dedicated to maintaining the precision and efficacy of high-tech equipment in preclinical and manufacturing domains. Engage with the latest in biomedical devices, industrial instrumentation, and high-end technologies like lasers and RF systems. As pioneers who've crafted a robust equipment program from scratch, we champion creative problem-solving and strive to set industry benchmarks. Immerse yourself in a mission-critical role that propels safety and regulatory compliance to new heights, and become part of a collaborative force driving the future of biomedical quality. Job Description and Responsibilities: Neuralink is seeking an Equipment Quality Technician with a strong knowledge of applied metrolog. This technician will calibrate, repair, and perform preventative maintenance on equipment in the quality program. In addition, they will troubleshoot and repair instruments and systems. This role requires participation in cross-functional teams and some travel. Additionally, you will be expected to: Calibrate and perform preventive maintenance on any instrument or device in the equipment quality program with little to no supervision Provide the technical expertise for assisting management in developing work procedures and protocols Assist in the design, fabrication, check-out, start-up, and acceptance of new or modified equipment Determine and requisition parts required for maintenance repairs Adhere to cGxP guidelines, SOPs, and safety rules/regulations Assist management with determining work schedules and project costs Work closely with cross-functional team members in regards to continuous improvement activities, solving problems, and improving overall product quality Explain calibration issues and processes to customers and management when needed Required Qualifications: Ability to comprehend and apply manuals and schematics for maintenance and troubleshooting Proficiency in using hand tools, physical/dimensional test instruments, and electronic test instruments Able to work in a dynamic, fast-paced environment Strong interpersonal skills: ability to work with colleagues and cross-functional teams in a professional and organized manner Competence in operating computing hardware and standard software Minimum of 1 year of experience related industrial instrumentation/calibration experience and/or training, or equivalent combination of education and experience Willingness to assist with other Quality Engineering activities such as facilities, equipment, and facilities validation Preferred Qualifications: Experience in PMEL, TMDE, Metrology, Calibration, Instrumentation, Validation, or Biomedical Equipment Associates or Bachelors Degree in Science, Technology, Engineering, Mathematics or military training in calibration Relevant experience working in a highly regulated (e.g., GMP, GCP, GLP) environments Expected Compensation: At Neuralink, your base pay is one part of your total compensation package. The anticipated hourly rate for this position is expected to be within the below range. Your actual base pay will be determined by your job-related skills, experience, and relevant education or training. Texas Hourly Range: $20 - $34/Hr USD What We Offer: Full-time employees are eligible for the following benefits listed below. An opportunity to change the world and work with some of the smartest and most talented experts from different fields Growth potential; we rapidly advance team members who have an outsized impact Excellent medical, dental, and vision insurance through a PPO plan Paid holidays Commuter benefits Meals provided Equity (RSUs) *Temporary Employees & Interns excluded 401(k) plan *Interns initially excluded until they work 1,000 hours Parental leave *Temporary Employees & Interns excluded Flexible time off *Temporary Employees & Interns excluded

As a successful family-owned company on a path to global growth, the Brose Group offers challenging responsibilities and exciting career opportunities to performance-driven, skilled specialists with solid professional knowledge and proven career expertise who wish to contribute to our company's success. Your tasks * Perform measurements and tests according to inspection plans and first-off approvals (e.g., dimensional checks, pull tests, torque verification, grease weight, CMM, UTS, tensile testing, etc.). * Conduct internal process and product audits per schedule (e.g., LPAs) or as required. * Maintain calibration records and manage the gage calibration system. * Perform ongoing Non-Right-First-Time (NRFT) and scrap analysis; implement corrective and preventive actions to reduce defects. Escalate and communicate quality concerns promptly to mitigate risk. * Prepare, distribute, and ensure execution of Quality Alerts; collect required signatures and maintain records. * Verify, maintain, and create Poka-Yoke (error-proofing) red rabbits as required. * Perform incoming inspections in line with the control plan. * Release or block material according to quality status; coordinate and manage sorting activities when necessary. * Maintain and update the failure table to track recurring issues. * Provide line-side support to production teams on quality-related matters. * Maintain the quality cage (controlled area for nonconforming parts). * Lead quality response activities during emergency situations, including containment and sorting. * Support root cause analysis (e.g., 5-Why, Ishikawa) and corrective action implementation. * Participate in cross-functional teams for continuous improvement initiatives. * Support training of production associates on quality standards and inspection methods. * Perform other duties as assigned by the Manager/Supervisor. Your Profile High school diploma or equivalent Two years or more of related experience and/or training; or equivalent combination of education and experience We offer you a modern working environment with our Brose working world Brose offers a high-tech work environment and a wide range of benefits. Along with competitive performance-based compensation and health insurance, our employees also benefit from attractive social and family-oriented programs throughout our North American locations*. Our benefits packages include comprehensive medical and insurance. Brose also provides educational assistance and a variety of community outreach, family, and sporting events. Flexible working hours and a collaborative work environment give our employees the freedom to balance work and personal life. Brose believes in investing in people. We offer a wide range of development programs with great opportunity for individual growth through training, international or regional assignments and tailored career paths. Our objective is to provide our employees the tools necessary to live a balanced life, experience a rewarding work environment and contribute to our surrounding communities. * Benefits package may vary slightly per location Our benefits * Health Management * Fit and healty * Brose Kids Club * Care of Relatives * Catering Service * Relocation * Dual Career * Leasing benefits * Brose Shop * Flexible office concept * Variable working hours * Modern work and communication equipment * Performance-based compensation and success payments * Corporate discounts * Suggestion Scheme IDEAS Our location Plant Spartanburg, Duncan, SC Brose Spartanburg, Inc 1171 Howell Rd Suite 300 Duncan, 29334 customer service *************** *************** *********************

Job DescriptionSUMMARY A detail-oriented Laboratory Technician to manage and perform calibration, verification, and maintenance of measurement and test equipment used throughout our manufacturing operations. The ideal candidate will ensure all equipment remains within specified tolerances and complies with internal quality systems and external standards (e.g., ISO 9001, ISO/IEC 17025, or other applicable requirements). ESSENTIAL DUTIES AND RESPONSIBILITIES Perform calibration, verification, and functional checks on a variety of instruments and equipment (e.g., pressure, temperature, dimensional, electrical, torque, and flow devices) Maintain and update calibration records, certificates, and traceability documentation in accordance with internal quality procedures Identify and segregate equipment found out of tolerance Coordinate repairs or adjustments with internal teams or external vendors Develop and maintain calibration schedules to ensure on-time service for all equipment Support root cause analysis and corrective actions for measurement-related nonconformances Work with quality and engineering teams to define calibration requirements for new or modified equipment Ensure all calibration activities meet relevant standards (e.g., NIST traceability, ISO/IEC 17025, or customer-specific requirements) Assist in audit preparation and provide technical support during internal and external audits. Maintain a clean, organized calibration area and follow all safety protocols and environmental procedures EDUCATION AND EXPERIENCE Education: Associate's degree in Metrology, Engineering Technology, Physics, or related technical field (or equivalent experience) Experience: 5+ years performing calibrations or working in a metrology or testing environment Familiarity with measurement principles, uncertainty, and common standards for dimensional, electrical, or mechanical calibration Ability to interpret technical drawings, specifications, and equipment manuals Strong computer skills and experience with calibration management software (e.g., GAGEtrak, IndySoft, or similar) Excellent attention to detail, recordkeeping, and organizational skills Ability to work independently and manage multiple priorities in a manufacturing environment CERTIFICATES, LICENSES, REGISTRATIONS Individuals must be able to perform the duties of the job at a level as generally prescribed and learned by attaining the credentials below. ASQ Certified Calibration Technician (CCT) preferred ASQ Certified Quality Technician (CQT) preferred PHYSICAL DEMANDS Ability to lift and move equipment up to 50 pounds Work may involve standing for extended periods or using fine motor tools Typical work environment: laboratory and production floor MANAGEMENT DISCLAIMER TECO-Westinghouse's Management reserves the right to revise, change or modify the duties and responsibilities of this position at any time to meet business and organizational needs. This position description may not list all duties for this position. The incumbent in the position may be asked to perform other duties. This position description is not a contract for employment and either the incumbent or TECO-Westinghouse may terminate employment at any time, for any reason. Powered by JazzHR 2eMynjmPfm

At Niagara, we're looking for Team Members who want to be part of achieving our mission to provide our customers the highest quality most affordable bottled water. Consider applying here, if you want to: Work in an entrepreneurial and dynamic environment with a chance to make an impact. Develop lasting relationships with great people. Have the opportunity to build a satisfying career. We offer competitive compensation and benefits packages for our Team Members. Plant Quality Technician - NIGHTSResponsible for executing corporate and plant specific Food Safety, Quality and Laboratory requirements. The QA Technician reports to QA Manager. In the absence of the Quality Assurance Technician, the QA Manager or designate will assume the job duties. Essential Functions Ensure all parameters of food safety and quality are being adhered to and maintained throughout the facility. Assist with batching chemicals/ingredients for production. Calibrate lab and line equipment for accurate results. Collect in-process and finished product samples. Conduct standardized qualitative and quantitative testing to ensure it meets specifications. Perform aseptic testing for microbial contamination. Follow protocols for documenting testing results. Recognize deficiencies and initiate proper follow-up. Identify and isolate product that does not meet standards. Aid in troubleshooting deficiencies and non-conformances. Review food safety and quality records. Actively participate in plant teams (HACCP, Safety, etc.) Conduct other duties as assigned by management. Please note this job description is not designed to contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without prior notice. Qualifications Minimum Qualifications: 0 Years - Experience in Field or similar manufacturing environment 0 Years - Experience in Position 0 Years - Experience managing people/projects *experience may include a combination of work experience and education Must read, write and communicate in English. Must be able to work 12 hour shift (days or nights) on a rotating schedule Must follow GMP Policy - wear company issued shirt, hat, safety glasses, earplugs and hairnet in production areas. Able to lift up to 50 lbs. Able to work under pressure in a very fast paced environment Preferred Qualifications: 2 Years- Experience in Field or similar manufacturing environment 2 Years - Experience working in Position 2 Years - Experience managing people/projects *experience may include a combination of work experience and education Competencies This position embodies the values of Niagara's LIFE competency model, focusing on the following key drivers of success: Lead Like an Owner Makes safety the number one priority Keeps alert for safety issues and escalates immediately Effectively prioritizes tasks based on department goals Shows respect to others and confronts interpersonal issues directly Prioritizes resolution of customer issues effectively Responds promptly and honors commitments to internal and external customers InnovACT Makes recommendations to continuously improve policies, methods, procedures, and/or products Demonstrates adaptability by reacting appropriately to unexpected changes in situations or circumstances Increases performance through greater efficiency Find a Way Seeks to develop technical knowledge through learning from other experts Understands interdepartmental impact of individual decisions and actions Seeks solutions rather than placing blame Empowered to be Great Consistently looks for ways to improve one's self through growth and development opportunities Communicates clearly and promptly up, down, and across Communicates effectively to manage expectations Education Minimum Required: High School Diploma Preferred: Associate's Degree Certification/License: Required: N/A Preferred: HACCP Foreign Language Required: Full Professional Proficiency Preferred: None Required Benefits Our Total Rewards package is thoughtfully designed to support both you and your family: Regular full-time team members are offered a comprehensive benefits package, while part-time, intern, and seasonal team members are offered a limited benefits package. Paid Time Off for holidays, sick time, and vacation time Paid parental and caregiver leaves Medical, including virtual care options Dental Vision 401(k) with company match Health Savings Account with company match Flexible Spending Accounts Expanded mental wellbeing benefits including free counseling sessions for all team members and household family members Family Building Benefits including enhanced fertility benefits for IVF and fertility preservation plus adoption, surrogacy, and Doula reimbursements Income protection including Life and AD&D, short and long-term disability, critical illness and an accident plan Special discount programs including pet plans, pre-paid legal services, identity theft, car rental, airport parking, etc. Tuition reimbursement, college savings plan and scholarship opportunities And more! *********************************************** * *Los Angeles County applicants only** Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers, the California Fair Chance Act, and any other applicable local and state laws. Any employment agency, person or entity that submits a résumé into this career site or to a hiring manager does so with the understanding that the applicant's résumé will become the property of Niagara Bottling, LLC. Niagara Bottling, LLC will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Employment agencies that have fee agreements with Niagara Bottling, LLC and have been engaged on a search shall submit résumé to the designated Niagara Bottling, LLC recruiter or, upon authorization, submit résumé into this career site to be eligible for placement fees.

Quality Technician Reports to:Assistant Quality Manager Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers' standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning ISO:9001, ISO:14001 and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: In this position, the Quality Technician performs dimensional and/or functional inspection on purchased materials and manufactured parts. Uses technical expertise and inspection instrumentation to verify conformance of materials/parts to prints, process sheets and specifications. Minimum Qualifications: Know & understand the use of all inspection equipment including (but not limited to): Micrometers Calipers Dial Indicators Height Gages Optical Comparators Gage Pins and Gage Blocks Sine Blocks and Setups Surface Finish Testers CMM Thread Gages Understand basic Geometric Tolerance. Able to read and understand drawings Knowledgeable about current quality system standards such as ISO-9002 and/or TS16949 Ability to multitask in response to numerous demands; time management skills Computer literate: Excel, Word, etc. Attention to detail Desired Skills: Experience with inspection and measuring equipment calibration Previous auditing experience and skills Experience writing procedures and work instructions PPAP documentation experience Specific Duties: Perform first piece, in-process and final inspections Provide inspection results to Quality Engineer for inclusion in PPAP's Understand cosmetic part requirements based on specific customer standards Provide inspection support based on needs of Manufacturing and Engineering Managers Maintain up to date documentation by completing all necessary paperwork i.e. in-process inspection records, signing off on travelers, 1st piece inspection tags, etc. Perform basic training as required for operator or team leader for First-Piece and In-Process Inspection Provide continuous feedback to the Assistant Quality Manager regarding quality, engineering and manufacturing-related issues Suggest process improvements Perform part and process related internal audits Maintain QA Lab and equipment in clean, orderly condition Special projects and assignments Physical Requirements: Regularly lifts and/or moves 25-50 pounds Requires frequent reaching, handling and grasping Requires occasional climbing of stairs, balancing, bending, crouching, fine manipulation and feeling This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

Axiom Space is collaborating with Astrolab, Inc. to develop a Lunar Terrain Vehicle (LTV) for future Artemis missions, combining Axiom's advanced AxEMU spacesuit with Astrolab's FLEX rover to enable groundbreaking scientific exploration on the Moon's surface. This partnership reflects Axiom Space's broader mission to build era-defining space infrastructure that drives exploration and fuels a vibrant space economy that will empower our civilization to transcend Earth for the benefit of every human, everywhere. Axiom Space fosters a work environment inclusive of all perspectives. We are the pioneers of commercial space, leading the transformation of low-Earth orbit into a global space marketplace. Our mission-driven team is seeking a bold and dynamic Senior Quality Technician who is fueled by high ownership, execution horsepower, growth mindset, and driven to understand our world, science/technology, and life itself, for the benefit of all on Earth and beyond. Employment in this role is contingent on Astrolab/Axiom being selected as a winner of NASA's LTVS contract. POSITION SUMMARY We are looking for a resilient, high-energy, experienced Senior Quality Control Technician with a good eye for detail. You will be responsible for performing standardized quality control checks on our company products to ensure they meet the required legal and company standards for safety and quality. You may also be required to maintain tool control records, calibrated test & inspection equipment, prepare test data, and identify areas for quality control improvement. Additional responsibilities may require you to operate company vehicles to store and transport materials and products. Lastly, you must be able to perform all tasks as directed by supervisor. KEY DUTIES & RESPONSIBILITIES Developing and maintaining company inspection reports Inspecting goods or products according to quality and safety standards across all stages of production Ensuring company tools and equipment are calibrated and working correctly Reporting quality anomalies to the supervisor Collating test data and drafting quality reports Identifying possible areas for improvement in quality control processes and implement new methods accordingly Comply with safety regulations and maintain clean and orderly work areas Urgently communicate quality, safety, or compliance concerns Communicating project progress, status, and potential issues to stakeholders and leadership Implementing and maintaining agile project management methodologies throughout the project lifecycle Perform additional job duties as assigned QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education & Experience High School diploma or GED Minimum of 10+ years of inspection experience Understanding of advanced mathematical concepts including fractions, ratios, and proportions Track record of delivering outcomes in ambiguous, fast-moving environments Uses good judgement to problem-solve proactively, positively impacting hard challenges Proven to deliver high quality results under tight deadlines Grit Passion for space and the mission Entrepreneurial, growth mindset Perseverance Resourceful, adaptable Skills GD&T experience Experience with Coordinate Measuring Machine (CMM) Advance Experience with Quality Inspection Tools Executes priorities with precision and pace High EQ and ability to collaborate within teams and cross-functionally Tech-savvy in using systems and tools to move faster and smarter Excellent written and verbal communication skills Competencies: Embody our core values of leadership, innovation, and teamwork. In addition, to perform the job successfully, an individual should demonstrate the following competencies: Accountability Sense of Urgency Extreme Ownership Execution and Delivery Efficiency Effectiveness WORK ENVIRONMENT: Generally, an office environment, but can involve inside or outside work depending on the task. Requirements Must be able to complete a U.S. government background investigation. Management has the prerogative to select at any level for which the position is advertised. Proof of U.S. Citizenship or US Permanent Residency is a requirement for this position. Must be willing to work evenings and weekends as needed to meet critical project milestones. Physical Requirements Work may involve sitting or standing for extended periods (90% of the time) May require lifting and carrying up to 25 lbs. (5% of the time) Equipment and Machines Standard office equipment (PC, phone, printer, etc.) Axiom Space is proud to be an equal opportunity employer. Axiom Space does not discriminate on the basis of race, regional color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with disability, or other applicable legally protected characteristics.

+ Maintains and repairs machinery such as engines, motors, pneumatic tools, conveyor systems, and production machines and equipment. Performs maintenance and repairs to physical structures of facility. + Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. + The requirements listed below are representative of the knowledge, skill, and/or ability required. + Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. **Experience:** + Minimum three to five years related experience and/or training; or equivalent combination of education and experience. **Skills:** **Language Skills:** + Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. + Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. + Bilingual (English Spanish) preferred. **Mathematical Skills:** + Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. + Ability to compute rate*** ratio, and percent and to draw and interpret bar graphs. **Education:** + Minimum High school diploma or general education degree (GED) **About US Tech Solutions:** US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit *********************** (********************************** . US Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, colour, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job Title: Level II QC Technician Metalforms is committed to matching the needs of our customers with products and services which provide value and can help them conserve resources, improve environmental quality to increase production, reduce and avoid down time, and assist in the development of new products. This will be accomplished through design, fabrication, testing and maintenance of heat exchangers and related process equipment. At Metalforms, we provide our customers with a variety of services that have helped us to become one of the leading providers of heat transfer solutions along the Gulf Coast Region. Metalforms was recently acquired by TransTech Energy, a leading provider of custom-engineered and fabricated solutions for liquids and gas processing, storage, transfer, and utilization across a broad range of industries including energy, petrochemical, specialty chemical, renewables, biofuels, and a variety of industrial process industries. Job Summary The primary responsibilities of the Level II QC Technician are to perform shop work in the following Non-destructive Testing techniques: (MT) Magnetic Particle, (PT) Dye Penetrant, (VT) Visual Testing, and (UTT) Ultrasonic thickness testing Job Requirements High school diploma or GED required SNT-TC1A for one or all of the following (Magnetic Particle, Penetrant, or Ultrasonic testing) required Prior certification as an NDT Level II with 1 year experience or prior experience as an NDT Level I technician with adequate field experience hours to certify to level II per SNT-TC1A standards in all or one of the following (Magnetic Particle, Penetrant, or Ultrasonic testing). Must have the ability to perform a wide variety of tasks and respond to short-notice work assignments Must have the ability to adapt to an ever-changing schedule Must be able to read technical documents, blueprints, and engineering specifications Must be able to follow precise directions and procedures Benefits Designed to Work for You: Free HSA health plan or traditional PPO 401(k) with generous company match (Safe Harbor) Dental, vision, and optional coverage like accident & critical illness insurance HSA and FSA accounts to save on healthcare costs Company-paid Life, Long Term Disability, and AD&D insurance Confidential support for mental health, family matters, legal concerns, and more through our Employee Assistance Program Discounts on gyms, shopping & entertainment Health benefits kick in fast - first of the month after 30 days Time Off We offer a variety of paid time off options to support rest, wellness, and personal needs: Paid Time Off Paid Holidays Bereavement Leave This organization provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. #MetalForms

Amarillo Gear Company LLC As a part of the global industrial organization Marmon Holdings-which is backed by Berkshire Hathaway-you'll be doing things that matter, leading at every level, and winning a better way. We're committed to making a positive impact on the world, providing you with diverse learning and working opportunities, and fostering a culture where everyone's empowered to be their best. SCOPE: The Tool Specialist will provide assistance with CNC machine tooling (tool bodies, inserts, endmills, grinding wheels, etc.) and hand tooling (wrenches, hardware, etc.) for the manufacturing plant. They will be responsible for organizing, inventorying, and repairing tooling in the tool crib, ordering special tooling, sending off tooling to be repaired, setting up and maintaining tool setup package carts for various work-centers, and assisting with part changeover at various CNC machines. They will work with different departments to improve production flow and on-time delivery throughout the entire manufacturing plant. EDUCATION REQUIREMENTS/ EXERIENCE: * 2+ years of hands-on programming experience preferred * Ability to write and understand machine code preferred * Inventory experience * Be comfortable in a fast-paced environment * Some experience with CAD/CAM software, such as Autodesk Fusion * Strong communication and documentation skills, with the ability to communicate with machinists on machine processes * Highly proficient in Microsoft Office (Excel, Word, Access, PowerPoint, etc.) * Mathematically inclined RESPONSIBILITIES: * Ensure each CNC machine has all the tooling required to manufacture various parts ahead of time to help production flow smoothly through the shop. * Coordinate tool tests with the CNC Programmer and report CNC programming changes that need to be made to improve tool life and part quality. * Clean up extra unused tooling at each work-center and inventory it to be sharpened or reused. * Set up tool packages for CNC machine changeovers to ensure CNC operators have all tooling they need to perform quick changeovers. * Inventory current tooling used at work-centers (such as custom-made boring heads) to help identify where spare tooling will be required to help production flow. * Assist the CNC operators in part changeover duties in pit-crew style changeovers to help the changeover go quicker and smoother. * Help complete program changes/transfers when CNC Programmer needs support. * Perform other duties, as assigned. REQUIRED PHYSICAL DEMANDS: * Standing for more than 1 hour, walking more than 100 ft., reach above, at or below shoulders, climb stairs, bend, stoop, and/or squat, grasping, hand/wrist twisting, lifting of up to 50lbs. Following receipt of a conditional offer of employment, candidates will be required to complete additional job-related screening processes as permitted or required by applicable law. We are an equal opportunity employer, and all applicants will be considered for employment without attention to their membership in any protected class. If you require any reasonable accommodation to complete your application or any part of the recruiting process, please email your request to ******************, and please be sure to include the title and the location of the position for which you are applying.

Job Description Quality Control Technician ATX Specialty Foods - Kyle, TX 78640 ATX Specialty Foods is a fast growing, premier producer of high quality dips & sauces. At ATX we serve up a broadly diversified portfolio of retail branded, food service, and private label offerings. We believe that great food comes from passion, quality ingredients and good people. That's where you come in! Experience in high traffic waste management is preferred but will train the right person. A firm understanding of general cleaning, sanitizing, and chemical safety is required. The position requires a 100% commitment to food safety and staying on task without direct supervision. BENEFITS: Medical Insurance Dental Insurance Vision Insurance Competitive pay Employee of the Month Reward Program Weekly "Lunch On Us" gift cards ($10) for demonstrated core values Monthly Company/Customer Sponsored Lunches A+ Team and Culture Frequent review periods Potential for overtime Opportunities for cross training Opportunity for career advancement Reporting directly to the quality manager, this position offers support to quality management responsibilities and is directly responsible for production quality control activitie The quality control technician is accountable for: Monitoring food safety throughout the manufacturing and packaging process Responsible for performing/reviewing pre-operational inspections and swabs Monitoring daily cleaning & sanitation duties Responsible for ensuring the correct SOPs are being followed Ensure all the employees are following GMP's Keep track of product on hold and/or disposition Working with receiving to assure raw ingredients quality Perform Critical Control Point checks and record keeping Collect product samples for lab tests Finished product release A successful candidate will have the following qualifications & skills: A bachelors degree in a science or quality related field OR 2-4 years of production quality control experience Prior experience in a food environment Familiarity with analytical testing methods a plus Must demonstrate the ability to analyze and summarize data Self-motivated with proven leadership skills Proficient in Microsoft Office Able to lift up to 50 lbs. Required to stand and walk for the major part of the shift Must be able to work in a team environment Must have a positive attitude Must have good written and oral communication skills Bilingual - English/Spanish is a plus Ability to work in fast-paced, effectively under pressure, and deadline-oriented environment Flexible availability for second shift/over time This is a full-time, first shift position. ATX Specialty Foods is an equal opportunity employer. ______________________________________________________________