Quality control technician jobs in Lubbock, TX - 20 jobs

The Site Templater plays a critical role in obtaining accurate measurements for countertop fabrication and installation. This position requires precision, strong communication, and knowledge of stone fabrication processes. The role involves daily travel to job sites, interaction with customers, and collaboration with production teams to ensure accurate templates and successful project outcomes. ESSENTIAL FUNCTIONS: Travel daily to residential and commercial job sites to take precise measurements. Create dimensional drawings based on field measurements (tract and custom jobs). Take site photos and confirm placement of sinks, backsplashes, and other features with customers. Confirm countertop details (stone type, color, edge profile, etc.). Translate field drawings into digital templates using AutoCAD or laser equipment. Operate CAD software to produce accurate installation plans. Communicate with other departments regarding modifications or clarifications to templates. Identify and document site issues, reporting them clearly on drawings. Collaborate with production planning and fabrication teams to align templates with available materials. Maintain accurate logs of drawings, templates, and revisions in company systems (e.g., SPS). Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions. QUALIFICATIONS (EDUCATION, CERTIFICATIONS, AND/OR TRAINING): Preferred Education: Associate degree in Draft or Civil Engineering preferred Knowledge of stone fabrication and installation processes Required Education: High school diploma, or equivalent Valid driver's license Preferred Experience: Experience using laser measuring equipment or paper templating Required Experience: 1 to 2 years' experience in operating CAD software (AutoCAD preferred). Field experience in countertop fabrication, templating, or installation. ESSENTIAL KNOWLEDGE, SKILLS, AND ABILITIES (KSA): Knowledge: Countertop fabrication and installation methods. CAD software for drawing and planning. Reading and analyzing architectural plans and layouts. Skills: CAD proficiency for simple-to-moderate drawings. Excellent communication and customer interaction skills. Strong organizational and time-management skills. Abilities: Accurately record measurements using tapes, lasers, or templating machines. Produce clear, legible, and accurate field drawings. Work independently with minimal supervision while managing multiple site visits. Troubleshoot site conditions and provide practical solutions. WORK ENVIRONMENT: This position will be primarily performed in the field, with frequent site visits to active construction environments. It will also involve working at our office, where drawing reviews and digital templating will be performed. Finally, this position will also involve occasionally working in fabrication facilities. PHYSICAL DEMANDS: Regularly required to walk, stand, kneel, squat, bend, and maneuver in construction environments. Must be able to lift and handle template materials and tools. Frequent eye-hand coordination required for measurements and CAD work. TRAVEL REQUIREMENTS: This position will involve regular, frequent travel to construction sites within the Houston area, as well as to our office and manufacturing facilities, as well as third-party facilities and offices. ABOUT ALLIED STONE INC.: With over 20 years of experience, Allied Stone Inc. is a trusted leader in high-quality stone fabrication. We foster long-lasting partnerships with major suppliers to ensure consistent quality at competitive prices. Our trendsetting designers, skilled craftsmen, and cutting-edge technology create seamless client experiences, resulting in unrivaled finished spaces. ALLIED STONE INC. OFFERS: Competitive salaries and comprehensive benefits. Ongoing learning opportunities within a diverse, inclusive, and rewarding work environment. AFFIRMATIVE ACTION/EEO STATEMENT: Allied Stone Inc. is committed to providing equal employment opportunities for all individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other characteristic protected by applicable law. We embrace diversity and encourage a work environment where differences are respected and valued. OTHER DUTIES: This job description is not designed to cover or contain a comprehensive listing of duties or responsibilities required of the employee. Duties and responsibilities may change at any time with or without notice.

POSITION: Welding Quality Control Inspector 1 or 2 SHIFT: 6:00 am - 4:30 pm, Monday - Thursday (OT Friday/Saturday as needed) PAY RATE: $21 - $26+ per hour (Depending On Experience) LOCATION: Lubbock, TX We are looking for committed, focused, detail-oriented individuals to join our quality control team as a Quality Control Inspector. This position is responsible for inspecting products to ensure they meet quality and contract specifications and meet external certification standards. If you are perceptive, care about quality, and have an acute concern for detail, apply today to be a Game Changer here at TrueNorth Steel. At TrueNorth Steel we value Safety, Integrity, Humility, Focus, Knowledge, Commitment, and Confidence. Since 1945, we have been delivering quality, trusted products to our customers. As an industry leader in quality manufactured and fabricated steel products, TrueNorth Steel puts safety at the forefront of our business, helping us achieve the quality we promise. TrueNorth Steel offers a comprehensive benefits package to full-time employees, which includes an excellent health/dental package, disability, life insurance, flexible spending account benefits, profit-sharing, 401(k) with company match, and paid time off. ESSENTIAL JOB FUNCTIONS Responsible for inspecting products to ensure they meet quality and contract specifications and meet external certification standards. Follow all company safety and quality requirements. Ensure that all materials and workmanship are completed in accordance with UL, STI, API, AWS, AISC, or City of LA standards, drawings and specifications, as applicable per site. Inspect materials and finished goods to ensure they meet customer requirements and/or contract specifications, including but not limited to checking welds, welding consumables, base material, cut & formed parts, layout work and coatings. Review welding specs and/or requirements for each project and work with team to solve fabrication challenges. Document and segregate non-conforming fabricated material and workmanship. Review and work with site management & shop supervisor to address remedies for non-conformances and their prevention. Ensure Welding Specification Procedures (WPS) are current and in place for projects, as applicable per site. Supervise and/or conduct Welder Qualification Test Reports (WQTR) to AWS (D1.1 and/or D1.5) and CWB standards, as applicable per site. Annual calibration of welding equipment, QC inspection equipment and pre-qualifications for bolt, as applicable per site. Remain current with AWS CWI and City of LA Supervisor &/or Inspector licenses, code analysis, industry standards, procedures and processes, as applicable per site. Understand, support and implement company Quality Management System. Work with Quality Assurance & Site Managers and Shop Supervisor to develop annual training programs for new and experienced employees to minimize product non-conformance. Represent the company, as needed, on field issues requiring investigation and decisions associated with product quality and conformance. Apply and work within appropriate controls related to Safety and Housekeeping. Operate overhead crane safely. Willing to work flexible hours and overtime or weekends as needed. Prompt and dependable attendance. Other duties as assigned. KNOWLEDGE, SKILLS AND QUALITIES Welding inspection training. Any applicable standards knowledge such as AWS, City of LA, API, UL, or STI. A thorough knowledge of contract documents and blueprint reading. Excellent math skills Leadership skills to motivate co-workers to quality workmanship. Ability to accept responsibility and account for his/her actions. Ability to perform work accurately and thoroughly. Ability to be truthful and be seen as credible in the workplace. Ability to make decisions or take actions to solve a problem or reach a goal. Be dependable and trustworthy. Embrace and demonstrate the qualities of the TrueNorth Steel Game Changer definition. EDUCATION AND WORK EXPERIENCE Minimum of five years welding experience, or equivalent training in manufacturing/structural steel. AWS Certified Weld Inspector or Associate Inspector is preferred.

Job Description Thompson Engineering is a leader in delivering high-quality infrastructure and construction projects across the South. With a strong commitment to safety, quality, and client satisfaction, we are currently seeking a dedicated and experienced Civil QA/QC Inspector to join our growing team. The Civil QA/QC Inspector will oversee the quality assurance and quality control aspects of civil construction work including earthworks, concrete, asphalt, utilities, drainage, and structural components. The ideal candidate will be responsible for ensuring that all construction activities comply with applicable codes, standards, project specifications, and quality plans. The Ideal candidate must be willing to travel to support project needs. Essential Functions of the Position Conduct QA/QC inspections for all civil construction activities, including but not limited to earthwork, foundation, concrete placement, utilities, roadways, and structural components. Review and interpret project drawings, specifications, and quality requirements. Prepare and maintain daily inspection reports, test results, non-conformance reports (NCRs), and corrective action documentation. Monitor construction work to ensure compliance with approved inspection and test plans (ITPs). Coordinate with contractors, site engineers, consultants, and quality managers to address any quality-related issues. Verify materials and workmanship meet the project's approved submittals and standards. Attend quality and coordination meetings as needed. Ensure that all inspection and testing records are properly documented and archived. Support continuous improvement by identifying recurring quality issues and suggesting practical solutions. Minimum Requirements High School Diploma or GED required; Associate's or Bachelor's degree in Civil Engineering, Construction Management, or related field preferred. Minimum of [3-5] years of experience in civil construction QA/QC, preferably in infrastructure or large-scale projects. In-depth knowledge of industry standards and codes (ASTM, ACI, AASHTO, etc.). Experience reviewing and implementing Inspection and Test Plans (ITPs) and Quality Control Plans (QCPs). Familiarity with construction materials and laboratory/field testing procedures. Strong organizational and communication skills. Proficiency with Microsoft Office Suite and QA/QC reporting tools. Valid driver's license and the ability to travel to project sites. Preferred Certifications (Not Required, but a Plus): ACI Concrete Field Testing Technician - Grade I NICET Certification in Civil/Construction Inspection OSHA 10 or 30 Certification ISO 9001 Quality Management Systems knowledge QMS/QA-related training or certifications Physical Requirements Must be willing to work flexible schedules and overtime as needed by the department needs. Ability to lift and carry a minimum of 40 lbs. Drive a company vehicle in a safe manner Walk, stoop, bend, and climb up and down stairs and ladders Stand, walk and balance in irregular and uneven terrain and pavements, concrete, grass, dirt and gravel. Work in high grounds and high open buildings Work outside for extended periods in the heat and cold Ability to wear appropriate PPE for hazardous materials Ability to read and write in English About Thompson Engineering Thompson Engineering was established in 1953 in Mobile, Alabama. Since then, the company has grown to include multiple offices in states throughout the Southeast. Thompson Engineering is a subsidiary of Thompson Holdings, Inc. Our sister companies are Watermark Design Group, an architectural and interior design firm, and Thompson Consulting Services, a disaster recovery consulting firm. As a group, the three firms provide a broad range of architectural and engineering services. Thompson is an employee-owned firm with more than 300 personnel in multiple disciplines. Our staff has a vested interest in providing safe, quality driven, successful projects that are completed on time and within budget. Our business relies heavily on our performance and the repeat satisfaction of our customers. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen and motor vehicle record checks are required.

Role and Responsibilities The Quality Control (QC) Inspector coordinates activities and enforces best-practices as it relates to the overall quality of our product and manufacturing process. The QC Inspector is responsible for receiving inspection of incoming materials, in-process inspections of product, and final inspection of outgoing customer shipments. The essential duties and responsibilities include, but are not limited to: Visual receiving, in-process, and final inspection of product to ensure product conforms to work orders. Developing and maintaining inspection reports including recording actual dimensional measurements using measuring tapes and/or diameter tapes and comparing to work order requirements. Measuring male and female threads, including National Pipe Tapered (NPT) threads, using thread micrometers. Recording and reporting non-conforming product to the Plant Manager for rework. Developing, maintaining, and enforcing current quality control procedures. Verifying completed orders conform to sales order requirements before final shipment preparation. Identifying areas for quality control improvement and implementing new methods in coordination with the Plant Manager. Qualifications and Education Requirements To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Minimum 3 years' experience required in a Quality Control field. Ductile and/or steel pipe industry experience is highly preferred. High School diploma or GED is required. Bachelor's or Associate degree in a related field is an advantage. Preferred Skills Certified Welding Inspector (CWI) is an advantage. Proficient in using measuring hand tools including measuring tapes, diameter tapes, and thread micrometers. Proficient in Microsoft Office software programs including Word and Excel. Ability to develop and maintain records in an organized and efficient manner. Ability to work well with individuals in multiple departments and be detail oriented. Excellent verbal and written communication skills and regard for quality standards. Ductile or steel pipe knowledge is an advantage. Additional Notes Pre-employment drug testing shall be required. All applicants shall be authorized to work in the U.S. COMPENSATION AND BENEFITS After 30 days of employment, employee is eligible for company benefits including medical, dental, vision, sick pay, vacation accruals, and 401(k).

Job DescriptionRole and Responsibilities The Quality Control (QC) Inspector coordinates activities and enforces best-practices as it relates to the overall quality of our product and manufacturing process. The QC Inspector is responsible for receiving inspection of incoming materials, in-process inspections of product, and final inspection of outgoing customer shipments. The essential duties and responsibilities include, but are not limited to: Visual receiving, in-process, and final inspection of product to ensure product conforms to work orders. Developing and maintaining inspection reports including recording actual dimensional measurements using measuring tapes and/or diameter tapes and comparing to work order requirements. Measuring male and female threads, including National Pipe Tapered (NPT) threads, using thread micrometers. Recording and reporting non-conforming product to the Plant Manager for rework. Developing, maintaining, and enforcing current quality control procedures. Verifying completed orders conform to sales order requirements before final shipment preparation. Identifying areas for quality control improvement and implementing new methods in coordination with the Plant Manager. Qualifications and Education Requirements To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Minimum 3 years' experience required in a Quality Control field. Ductile and/or steel pipe industry experience is highly preferred. High School diploma or GED is required. Bachelor's or Associate degree in a related field is an advantage. Preferred Skills Certified Welding Inspector (CWI) is an advantage. Proficient in using measuring hand tools including measuring tapes, diameter tapes, and thread micrometers. Proficient in Microsoft Office software programs including Word and Excel. Ability to develop and maintain records in an organized and efficient manner. Ability to work well with individuals in multiple departments and be detail oriented. Excellent verbal and written communication skills and regard for quality standards. Ductile or steel pipe knowledge is an advantage. Additional Notes Pre-employment drug testing shall be required. All applicants shall be authorized to work in the U.S. COMPENSATION AND BENEFITS After 30 days of employment, employee is eligible for company benefits including medical, dental, vision, sick pay, vacation accruals, and 401(k).

Decima International is a professional services company, providing project management and controls services to clients in the United States and the Middle East. Our mission is to become the premier professional services provider across all industry sectors we are engaged in. To accomplish this, Decima International's founders established a simple yet powerful formula: Approach each client engagement as a partnership, create an environment that attracts the most talented professionals and allows them to flourish, and regulate growth to maintain excellence in our service standards. If you are interested in a long and rewarding career working with high-profile clients on some of the most challenging projects in the world, then Decima is where you belong. At Decima, you will be able to explore incredible growth and professional development opportunities. We are looking for a driven and capable Mechanical QA Inspector to support us with the development of multiple hyperscale data center projects for one of our top technology clients. This is a client-facing role that requires strong interpersonal, communication and organizational skills, ability to self-direct, client representation, and an emphasis on strong project management fundamentals. Must be able to manage multiple projects concurrently. A strong background in data center development, design, engineering, controls, and operations requirements is a big plus. You will play an integral role in ensuring the development and implementation of the Quality Management System (QMS) in addition to the coordination, performance, and completion of all construction audits and commissioning services of the project. The Mechanical QA Inspector is accountable for the quality of work performed, compliance with building codes, safety regulations, as well as meeting the project's contractual requirements set forth by the client. We are looking to bring in dedicated individuals with a passion for innovation and talent for multitasking in a fast-paced environment. We will help you grow, pursue, and fulfill what inspires you so we can make big impacts on the world, together. RESPONSIBILITIES Understand the project scope and requirements. Ensure compliance with quality standards, building codes, safety regulations, and environmental guidelines. Review and verify material submittals for A/E and Client approval. Confirm delivered materials match approved submittals. Manage and review submittals, RFI logs, maintenance logs, and other project documents promptly. Update QC punch lists and coordinate with general contractors (GC) and subcontractors for completion. Conduct internal quality audits and site inspections. Adhere to Quality, Health, Safety, & Environment (HSE) standards. Provide technical support to address operational challenges and client concerns. Plan and inspect Definable Features of Work (DFWs). Develop and implement Audit and Test Plans for quality inspections and testing. Maintain and update Quality manuals, checklists, and forms. Collaborate with third-party QA/QC firms as needed. Participate in Quality Management System (QMS) audits. Build relationships with project partners, consulting engineering firms, public agencies, and clients. Ensure document control compliance and maintain project submittal logs and quality control reports. Verify and document material compliance with approved submittals. Compile and forward project closeout documents, including O&M manuals, as-builts, and warranties. Investigate and address non-conformance issues promptly. Ensure calibration of inspection, measurement, and test equipment. Liaise with the General Contractor, Client, and Project Management team to resolve quality issues. Prepare presentations on progress, findings, and recommendations for management. Review subcontractors' submittals for compliance. Coordinate and monitor subcontractors, suppliers, direct labor, and materials. Collaborate with public utility suppliers for final service connections. Coordinate activities of inspection agencies. Achieve required MEPS and electromechanical inspections. Assist in preparing periodic QA/inspection progress reports. Review and approve subcontractor work percentages. Oversee commissioning processes. Manage the MEP project closeout to ensure all requirements are met. QUALIFICATIONS Required Qualifications: 15+ years of construction and quality management experience. Bachelor's degree in mechanical, electrical engineering, or a related field. Experience with managing field engineering, inspection, and NDE related to all QA/QC functions. Proficient with reading, understanding, and interpreting plans, specifications, drawings, contracts, and other documents pertaining to MEP aspects of projects. Ability to develop and manage non-conformance, defects, and reporting programs, including root cause analysis. Ability to ensure correct codes, standards, job specifications, project procedures, and federal and provincial regulations are properly identified, correctly specified in detail, and met or exceeded. Ability to work in high-production environments and respond quickly and effectively under pressure and deadlines while maintaining a professional demeanor. Technical knowledge of materials and construction concepts. Experience working as a Mechanical Quality Supervisor for large commercial, industrial, or mission-critical facilities construction projects. An excellent understanding of construction Quality Management Systems (QMS). Familiarity with punch list procedures and project closeout processes. Strong attention to detail and excellent analytical skills. Strong knowledge of high, medium, and low-voltage systems, HVAC, control systems, commissioning, LEED/Green building projects, and general ground-up construction projects as applicable to MEPS. Preferred Qualifications: Project Management Professional (PMP) certification. Construction Quality Manager Certification (CCQM) US Army Corps of Engineers (USACE) Certified Quality Auditor (CQA) Member of the American Society for Quality Six Sigma Certifications ISO 9001 Green Business Certification (LEED) Strong background in data center development and construction POSITION DETAILS: Primary Location (On-site): Lubbock, Texas Position: Mechanical QA Inspector Position Classification: Salary-based full-time hours Current US work permit required. This position does not offer sponsorship for employment (e.g., H-1B visa sponsorship or transfer not offered) PRODUCTIVITY TOOLS: Microsoft Office Microsoft 365 CxAlloy Decima International is an Equal Opportunity Employer who is committed to the safety and wellbeing of all. All qualified applicants will receive consideration for employment without regard to race, religion, creed, color, national origin, ancestry, sex (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, medical condition, marital or domestic partner status, sexual orientation, gender, gender identity, gender expression and transgender status, mental disability or physical disability, genetic information, military or veteran status, citizenship, low-income status or any other status or characteristic protected by applicable law. At Decima International, we offer a competitive salary package, including paid time off and performance-based bonuses. We also provide excellent medical, vision and dental insurance for our employees.

Job Description Decima International is a professional services company, providing project management and controls services to clients in the United States and the Middle East. Our mission is to become the premier professional services provider across all industry sectors we are engaged in. To accomplish this, Decima International's founders established a simple yet powerful formula: Approach each client engagement as a partnership, create an environment that attracts the most talented professionals and allows them to flourish, and regulate growth to maintain excellence in our service standards. If you are interested in a long and rewarding career working with high-profile clients on some of the most challenging projects in the world, then Decima is where you belong. At Decima, you will be able to explore incredible growth and professional development opportunities. We are looking for a driven and capable Electrical QA Inspector to support us with the development of multiple hyperscale data center projects for one of our top technology clients. This is a client-facing role that requires strong interpersonal, communication and organizational skills, ability to self-direct, client representation, and an emphasis on strong project management fundamentals. Must be able to manage multiple projects concurrently. A strong background in data center development, design, engineering, controls, and operations requirements is a big plus. You will play an integral role in ensuring the development and implementation of the Quality Management System (QMS) in addition to the coordination, performance, and completion of all construction audits and commissioning services of the project. The Electrical QA Inspector is accountable for the quality of work performed, compliance with building codes, safety regulations, as well as meeting the project's contractual requirements set forth by the client. We are looking to bring in dedicated individuals with a passion for innovation and talent for multitasking in a fast-paced environment. We will help you grow, pursue, and fulfill what inspires you so we can make big impacts on the world, together. RESPONSIBILITIES Understand the project scope and requirements. Ensure compliance with quality standards, building codes, safety regulations, and environmental guidelines. Review and verify material submittals for A/E and Client approval. Confirm delivered materials match approved submittals. Manage and review submittals, RFI logs, maintenance logs, and other project documents promptly. Update QC punch lists and coordinate with general contractors (GC) and subcontractors for completion. Conduct internal quality audits and site inspections. Adhere to Quality, Health, Safety, & Environment (HSE) standards. Provide technical support to address operational challenges and client concerns. Plan and inspect Definable Features of Work (DFWs). Develop and implement Audit and Test Plans for quality inspections and testing. Maintain and update quality manuals, checklists, and forms. Collaborate with third-party QA/QC firms as needed. Participate in Quality Management System (QMS) audits. Build relationships with project partners, consulting engineering firms, public agencies, and clients. Ensure document control compliance and maintain project submittal logs and quality control reports. Verify and document material compliance with approved submittals. Compile and forward project closeout documents, including O&M manuals, as-builts, and warranties. Investigate and address non-conformance issues promptly. Ensure calibration of inspection, measurement, and test equipment. Liaise with the General Contractor, Client, and Project Management team to resolve quality issues. Prepare presentations on progress, findings, and recommendations for management. Review subcontractors' submittals for compliance. Coordinate and monitor subcontractors, suppliers, direct labor, and materials. Collaborate with public utility suppliers for final service connections. Coordinate activities of inspection agencies. Achieve required MEPS and electromechanical inspections. Assist in preparing periodic QA/inspection progress reports. Review and approve subcontractor work percentages. Oversee commissioning processes. Manage the MEP project closeout to ensure all requirements are met. QUALIFICATIONS Required Qualifications: 15+ years of construction and quality management experience. Bachelor's degree in mechanical, electrical engineering, or a related field. Experience with managing field engineering, inspection, and NDE related to all QA/QC functions. Proficient with reading, understanding, and interpreting plans, specifications, drawings, contracts, and other documents pertaining to MEP aspects of projects. Ability to develop and manage non-conformance, defects, and reporting programs, including root cause analysis. Ability to ensure correct codes, standards, job specifications, project procedures, and federal and provincial regulations are properly identified, correctly specified in detail, and met or exceeded. Ability to work in high-production environments and respond quickly and effectively under pressure and deadlines while maintaining a professional demeanor. Technical knowledge of materials and construction concepts. Experience working as an Electrical QA/QC Supervisor for large commercial, industrial, or mission-critical facilities construction projects. An excellent understanding of construction Quality Management Systems (QMS). Familiarity with punch list procedures and project closeout processes. Strong attention to detail and excellent analytical skills. Strong knowledge of high, medium, and low-voltage systems, HVAC, control systems, commissioning, LEED/Green building projects, and general ground-up construction projects as applicable to MEPS. Preferred Qualifications: Project Management Professional (PMP) certification. Construction Quality Manager Certification (CCQM) US Army Corps of Engineers (USACE) Certified Quality Auditor (CQA) Member of the American Society for Quality Six Sigma Certifications ISO 9001 Green Business Certification (LEED) Strong background in data center development and construction POSITION DETAILS: Primary Location (On-site): Lubbock, Texas Position: Electrical QA Inspector Position Classification: Salary-based full-time hours Current US work permit required. This position does not offer sponsorship for employment (e.g., H-1B visa sponsorship or transfer not offered) PRODUCTIVITY TOOLS: Microsoft Office Microsoft 365 CxAlloy Decima International is an Equal Opportunity Employer who is committed to the safety and wellbeing of all. All qualified applicants will receive consideration for employment without regard to race, religion, creed, color, national origin, ancestry, sex (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, medical condition, marital or domestic partner status, sexual orientation, gender, gender identity, gender expression and transgender status, mental disability or physical disability, genetic information, military or veteran status, citizenship, low-income status or any other status or characteristic protected by applicable law. At Decima International, we offer a competitive salary package, including paid time off and performance-based bonuses. We also provide excellent medical, vision and dental insurance for our employees.

Xylem is a Fortune 500 global water solutions company dedicated to advancing sustainable impact and empowering the people who make water work every day. As a leading water technology company with 23,000 employees operating in over 150 countries, Xylem is at the forefront of addressing the world's most critical water challenges. We invite passionate individuals to join our team, dedicated to exceeding customer expectations through innovative and sustainable solutions. Xylem is seeking a Quality Inspector responsible for performing inspections on incoming materials, parts, and assemblies to ensure compliance with engineering drawings, specifications, and quality standards. This role plays a key part in maintaining product integrity and supporting continuous improvement within our manufacturing operations. Essential Duties and Responsibilities Inspect incoming materials and finished assemblies for compliance with standards, drawings, and purchase order requirements. Document inspection results through receiving and final inspection reports. Generate Product Inspection Reports (PIRs) for all non-conforming materials. Collaborate with Quality Engineering to identify root causes and assist in implementing corrective actions. Perform additional quality-related tasks as assigned. Availability to work Monday through Saturday as needed. Minimum Qualifications High school diploma or GED required. Minimum of 2 years of experience in dimensional inspection. Ability to read and interpret engineering drawings. Proficient in the use of standard inspection tools and measuring equipment. Strong attention to detail and effective communication skills. Preferred Qualifications Experience in a pump fabrication or machine shop environment. Basic computer skills and familiarity with ISO 9000 quality standards. Physical Demands Ability to stand or sit for 8+ hours per shift. Frequent reaching, walking, pushing, pulling, and lifting. Must be able to lift and handle parts up to 35 lbs.; heavier items will be lifted using a hoist. Work Environment Typical manufacturing shop environment with seasonal temperature changes. Exposure to noise-ear protection required. Work around electrical components, motors, and wiring. Required PPE includes: safety glasses, ear plugs, safety shoes (with toe and metatarsal guards), gloves, and work uniform. Join the global Xylem team to be a part of innovative technology solutions transforming water usage, conservation, and re-use. Our products impact public utilities, industrial sectors, residential areas, and commercial buildings, with a commitment to providing smart metering, network technologies, and advanced analytics for water, electric, and gas utilities. Partner with us in creating a world where water challenges are met with ingenuity and dedication; where we recognize the power of inclusion and belonging in driving innovation and allowing us to compete more effectively around the world. At Xylem, you'll not only contribute to solving water issues but also have the chance to make a difference through our paid Volunteer Program, Xylem Watermark. We prioritize our employees' well-being through inclusion and belonging as well as our Employee Resource Groups (ERG). Proud to be an Equal Employment Opportunity (including disability and veterans) and Affirmative Action workplace, Xylem fosters an inclusive environment free from discrimination or harassment. Please note that the information in this outlines the general nature of the position and is not an exhaustive list of duties. Xylem is dedicated to providing reasonable accommodations to enable all employees to perform their essential job functions. We reserve the right to modify this job description and assign additional duties as needed. Embrace the opportunity to be part of Xylem's transformative journey in shaping the future of water technology! #XylemCareers #GlobalImpact #WaterInnovation

The Engineering Technician works with the Engineering team to provide technical support to Operations, utilizes and maintains equipment needed for inventory control and mapping, conducts drone surveys, generates reports, and is a support role to the Geology and Environmental departments. Functional Responsibilities Ø Exhibit a strong work ethic with the ability to take direction and work in a team setting and independently. Ø Adhere to Permian Basin Materials Code of Conduct and company policies. Ø Conduct regular monthly and as needed drone flight services for calculating aggregate inventory and mapping land contours. Communicate findings to appropriate manager and collaborate with management to verify accuracy or explain variances. Ø Generate reports of information gathered from the drone and other research assignments. Ø Utilize GPS equipment for surveying and identifying land boundaries. Ø Assist in data processing, mapping, and modeling. Ø Collect, sort, and prepare rock samples for testing. Ø Assist with Environmental department tasks (sample collection, site visits, inspections). Ø Support Geology department with field sampling, sample analysis (QC) and drilling. Ø Maintain accurate, timely records of test data, quality control results, and files for the Engineering department. Ø Complete special projects as assigned. Ø Comply with all Safety, Health, Environmental and other Company policies and procedures. Ø Perform other functions and duties as required. Competencies: Ø Possess background knowledge in drone operation, engineering or earth science. Ø Capable of conducting independent research. Ø Work well in a team or independently. Ø Pay close attention to detail. Ø Exhibit strong organizational skills. Ø Communicate clearly and effectively. Ø Understand and interpret drone related data and volumetric analysis. Ø Demonstrate ability to communicate technical material into layman's terms for explanatory purposes. Ø Exhibit solid customer service and interpersonal skills. Ø Demonstrate intellectual curiosity. Ø Exhibit familiarity with proper lab safety procedures. EXPERIENCE/TRAINING/CERTIFICATIONS Ø An Associate degree in Surveying, Engineering Technology, Earth Sciences or similar preferred. Ø A High School diploma required. Ø FAA unmanned aircraft licensing is required to be obtained within 1-2 months of hire and maintained during entirety of employment with PB Materials. Ø 1-3 years of experience in aggregate or related industry a plus. Ø Willingness to travel to his/her assigned locations within the Permian Basin and spend a significant portion of time in a mining environment. Ø A valid driver's license with no major violations that would exclude a person from driving for business as defined by our insurance carrier and company policy. Requirements PHYSICAL AND ENVIRONMENTAL REQUIREMENTS Ø Candidate must be drug free. Ø Position requires moderately strenuous physical work. Ø Must be able to: o Lift and carry up to 40 pounds from floor to 3' - 5' occasionally, o Sit or stand for extended periods of time, o Travel safely while walking over uneven terrain, roads, and pavement, o Use hands and fingers to operate computers and other office machinery, o Effectively communicate in verbal and written formats with internal and external personnel, clients, and vendors, o Wear proper protective equipment including hard hat, safety glasses, high visibility clothing, steel-toed boots, and gloves, o Observe all company Safety policies on company premises and while operating heavy construction machinery, o Occasionally work in extreme hot and cold weather conditions, o Work safely in wet, muddy, and slippery conditions occasionally, Ø Environment will vary from outdoors with varying noise levels and vibrations associated with construction equipment, and exposure to building materials, dust, and dirt at operating sites to a normal office environment.

Job Description Magrym Consulting Inc. is seeking a qualified Construction Materials Testing (CMT) Technician in Midland, Texas. As a growing company, technicians will have the opportunity to grow with us. Candidates should be willing to work overtime and weekends as required. Duties include: Soil and Aggregate Sampling Logging materials Perform Aggregate, Soil and Concrete Testing Lab and Field work Follow ASTM and AASHTO Standards Software data entry Geotechnical sample logging Maintaining a clean working environment Accurate recording of timesheets Daily travel to and from construction sites, generally within 100 miles from the home office The ability to train to achieve minimum certificates in ACI, NICET, and/or State Testing Certificates within 6 months of hire Ability to work outside in the vicinity of large construction equipment Ability to utilize hand tools such as sledgehammers, shovels and picks Observing and documenting field activities Maintain equipment and lab vehicles In-house equipment verification General Skills: Attention to detail Basic Math, Microsoft Suite skills Excellent communication with internal and external clients General maintenance skills Strong safety focus Physical Requirements: Ability to lift 60+ lbs Stand in one place for 1 to 2 hours at a time Ability to wear appropriate PPE for hazardous materials Wear steel toe shoes as needed Ability to work indoors and outdoors in all weather conditions Ability to reach with hands and arms, climb or balance, and stoop, kneel, crouch or crawl. At times, this position may be working at or on uneven terrain, varying heights, in confined spaces, or supported trenches. Requirements High School Diploma or equivalent Valid Texas Drivers License Clean driving record ACI Field Technician Certification (preferred) ACI Laboratory Technician Certification (preferred) ACI Aggregate Base Testing Technician Certification (preferred) Ability to pass a pre-employment/random drug test Associates or Bachelor degree in Civil Engineering, Architecture or Construction is a plus Benefits Dental insurance Health insurance Life insurance On-the-job training Paid time off Paid Holidays Paid training 401K Retirement plan Vision Insurance Dental Insurance Short Term/Long Term Disability

Select Milk Producers is one of the nation's largest and most progressive dairy cooperatives, with 32 wholly owned subsidiaries, 8 processing plants, and 8 joint ventures including Continental Dairy Facilities, Continental Dairy Facilities Southwest, Mill Haven Foods, Select Custom Solutions, GreenLink and Select Services. With over 800 employees, the Select Milk family of companies impacts all aspects of the dairy farm business and at the heart of our family of companies, is you. "We strive to go above and beyond what's expected in providing for our families, leading our employees, caring for our land and animals, serving our customers, producing quality milk, and serving one another. This commitment is more than our business, it's in our culture and our character. We believe in being accountable, in doing what's right, in performing at our best, in setting a higher standard." Select Milk Producers and its subsidiaries offer an attractive compensation and a best-in-class benefits package that includes but is not limited medical, vision, dental, life insurance and more that can be tailored for you and your family. Other benefits for eligible employees include 401(k) up to 6% company match, life and disability insurance, and paid holidays & vacation. We are proud to promote an equal employment opportunity workplace. SUMMARY OF FUNCTIONS: The Quality Assurance Technician is responsible for analytical and microbiological evaluations of all raw, pasteurized, and final products. All work must comply with USDA, FDA, AOAC, GFSI, GMP, and safety regulations, as well as company policies. A Technician I performs routine testing and QA tasks under close supervision, focusing on building technical proficiency and knowledge. DUTIES AND RESPONSIBILITIES: • Operate laboratory testing equipment and independently perform a broad range of analytical and microbiological tests • Perform daily quality checks and audits under close supervision. • Accurately complete worksheets and logs, either electronic or paper. • Assist in the preparation of solutions, media, and sample compositing for third-party testing. • Follow all safety, GMP, and laboratory protocols. • Maintain cleanliness and organization of the laboratory work area. • Escalate unusual results or product defects immediately to a supervisor. • Participate in basic training and continuous improvement activities. • Perform other duties as assigned by management. KNOWLEDGE, SKILLS, AND ABILITIES REQUIRED: • Must work in a safe, efficient manner and follow all safety procedures including the use of safety equipment. • Must have the ability to troubleshoot small problems and be able to discern when issues may require input from levels of authority within the corporation. Must be willing to ask for assistance when the process is unclear. • Developing knowledge of laboratory practices. Works under close supervision. Seeks guidance when issues arise. EDUCATION AND/OR EXPERIENCE: • Tech I: Bachelor's degree preferred (or equivalent coursework) in Dairy Science, Microbiology, Food Science, Chemistry, or related field or similar work experience in related industry. CERTIFICATES, LICENSES, REGISTRATIONS: • All levels must be able to acquire a Certified Sampler license by the state regulatory agency. • All levels must be able to obtain certification as Certified Industry Supervisor in accordance with the Pasteurized Milk Ordinance (PMO) and state regulatory requirements. Tech I: Expected to obtain certifications within specified timeframe.

The Site Templater plays a critical role in obtaining accurate measurements for countertop fabrication and installation. This position requires precision, strong communication, and knowledge of stone fabrication processes. The role involves daily travel to job sites, interaction with customers, and collaboration with production teams to ensure accurate templates and successful project outcomes. ESSENTIAL FUNCTIONS: Travel daily to residential and commercial job sites to take precise measurements. Create dimensional drawings based on field measurements (tract and custom jobs). Take site photos and confirm placement of sinks, backsplashes, and other features with customers. Confirm countertop details (stone type, color, edge profile, etc.). Translate field drawings into digital templates using AutoCAD or laser equipment. Operate CAD software to produce accurate installation plans. Communicate with other departments regarding modifications or clarifications to templates. Identify and document site issues, reporting them clearly on drawings. Collaborate with production planning and fabrication teams to align templates with available materials. Maintain accurate logs of drawings, templates, and revisions in company systems (e.g., SPS). Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions. QUALIFICATIONS (EDUCATION, CERTIFICATIONS, AND/OR TRAINING): Preferred Education: Associate degree in Draft or Civil Engineering preferred Knowledge of stone fabrication and installation processes Required Education: High school diploma, or equivalent Valid driver's license Preferred Experience: Experience using laser measuring equipment or paper templating Required Experience: 1 to 2 years' experience in operating CAD software (AutoCAD preferred). Field experience in countertop fabrication, templating, or installation. ESSENTIAL KNOWLEDGE, SKILLS, AND ABILITIES (KSA): Knowledge: Countertop fabrication and installation methods. CAD software for drawing and planning. Reading and analyzing architectural plans and layouts. Skills: CAD proficiency for simple-to-moderate drawings. Excellent communication and customer interaction skills. Strong organizational and time-management skills. Abilities: Accurately record measurements using tapes, lasers, or templating machines. Produce clear, legible, and accurate field drawings. Work independently with minimal supervision while managing multiple site visits. Troubleshoot site conditions and provide practical solutions. WORK ENVIRONMENT: This position will be primarily performed in the field, with frequent site visits to active construction environments. It will also involve working at our office, where drawing reviews and digital templating will be performed. Finally, this position will also involve occasionally working in fabrication facilities. PHYSICAL DEMANDS: Regularly required to walk, stand, kneel, squat, bend, and maneuver in construction environments. Must be able to lift and handle template materials and tools. Frequent eye-hand coordination required for measurements and CAD work. TRAVEL REQUIREMENTS: This position will involve regular, frequent travel to construction sites within the Houston area, as well as to our office and manufacturing facilities, as well as third-party facilities and offices. ABOUT ALLIED STONE INC.: With over 20 years of experience, Allied Stone Inc. is a trusted leader in high-quality stone fabrication. We foster long-lasting partnerships with major suppliers to ensure consistent quality at competitive prices. Our trendsetting designers, skilled craftsmen, and cutting-edge technology create seamless client experiences, resulting in unrivaled finished spaces. ALLIED STONE INC. OFFERS: Competitive salaries and comprehensive benefits. Ongoing learning opportunities within a diverse, inclusive, and rewarding work environment. AFFIRMATIVE ACTION/EEO STATEMENT: Allied Stone Inc. is committed to providing equal employment opportunities for all individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other characteristic protected by applicable law. We embrace diversity and encourage a work environment where differences are respected and valued. OTHER DUTIES: This job description is not designed to cover or contain a comprehensive listing of duties or responsibilities required of the employee. Duties and responsibilities may change at any time with or without notice.

Thompson Engineering is a leader in delivering high-quality infrastructure and construction projects across the South. With a strong commitment to safety, quality, and client satisfaction, we are currently seeking a dedicated and experienced Civil QA/QC Inspector to join our growing team. The Civil QA/QC Inspector will oversee the quality assurance and quality control aspects of civil construction work including earthworks, concrete, asphalt, utilities, drainage, and structural components. The ideal candidate will be responsible for ensuring that all construction activities comply with applicable codes, standards, project specifications, and quality plans. The Ideal candidate must be willing to travel to support project needs. Essential Functions of the Position Conduct QA/QC inspections for all civil construction activities, including but not limited to earthwork, foundation, concrete placement, utilities, roadways, and structural components. Review and interpret project drawings, specifications, and quality requirements. Prepare and maintain daily inspection reports, test results, non-conformance reports (NCRs), and corrective action documentation. Monitor construction work to ensure compliance with approved inspection and test plans (ITPs). Coordinate with contractors, site engineers, consultants, and quality managers to address any quality-related issues. Verify materials and workmanship meet the project's approved submittals and standards. Attend quality and coordination meetings as needed. Ensure that all inspection and testing records are properly documented and archived. Support continuous improvement by identifying recurring quality issues and suggesting practical solutions. Minimum Requirements High School Diploma or GED required; Associate's or Bachelor's degree in Civil Engineering, Construction Management, or related field preferred. Minimum of [3-5] years of experience in civil construction QA/QC, preferably in infrastructure or large-scale projects. In-depth knowledge of industry standards and codes (ASTM, ACI, AASHTO, etc.). Experience reviewing and implementing Inspection and Test Plans (ITPs) and Quality Control Plans (QCPs). Familiarity with construction materials and laboratory/field testing procedures. Strong organizational and communication skills. Proficiency with Microsoft Office Suite and QA/QC reporting tools. Valid driver's license and the ability to travel to project sites. Preferred Certifications (Not Required, but a Plus): ACI Concrete Field Testing Technician - Grade I NICET Certification in Civil/Construction Inspection OSHA 10 or 30 Certification ISO 9001 Quality Management Systems knowledge QMS/QA-related training or certifications Physical Requirements Must be willing to work flexible schedules and overtime as needed by the department needs. Ability to lift and carry a minimum of 40 lbs. Drive a company vehicle in a safe manner Walk, stoop, bend, and climb up and down stairs and ladders Stand, walk and balance in irregular and uneven terrain and pavements, concrete, grass, dirt and gravel. Work in high grounds and high open buildings Work outside for extended periods in the heat and cold Ability to wear appropriate PPE for hazardous materials Ability to read and write in English About Thompson Engineering Thompson Engineering was established in 1953 in Mobile, Alabama. Since then, the company has grown to include multiple offices in states throughout the Southeast. Thompson Engineering is a subsidiary of Thompson Holdings, Inc. Our sister companies are Watermark Design Group, an architectural and interior design firm, and Thompson Consulting Services, a disaster recovery consulting firm. As a group, the three firms provide a broad range of architectural and engineering services. Thompson is an employee-owned firm with more than 300 personnel in multiple disciplines. Our staff has a vested interest in providing safe, quality driven, successful projects that are completed on time and within budget. Our business relies heavily on our performance and the repeat satisfaction of our customers. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen and motor vehicle record checks are required.

Role and Responsibilities The Quality Control (QC) Inspector coordinates activities and enforces best-practices as it relates to the overall quality of our product and manufacturing process. The QC Inspector is responsible for receiving inspection of incoming materials, in-process inspections of product, and final inspection of outgoing customer shipments. The essential duties and responsibilities include, but are not limited to: Visual receiving, in-process, and final inspection of product to ensure product conforms to work orders. Developing and maintaining inspection reports including recording actual dimensional measurements using measuring tapes and/or diameter tapes and comparing to work order requirements. Measuring male and female threads, including National Pipe Tapered (NPT) threads, using thread micrometers. Recording and reporting non-conforming product to the Plant Manager for rework. Developing, maintaining, and enforcing current quality control procedures. Verifying completed orders conform to sales order requirements before final shipment preparation. Identifying areas for quality control improvement and implementing new methods in coordination with the Plant Manager. Qualifications and Education Requirements To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Minimum 3 years' experience required in a Quality Control field. Ductile and/or steel pipe industry experience is highly preferred. High School diploma or GED is required. Bachelor's or Associate degree in a related field is an advantage. Preferred Skills Certified Welding Inspector (CWI) is an advantage. Proficient in using measuring hand tools including measuring tapes, diameter tapes, and thread micrometers. Proficient in Microsoft Office software programs including Word and Excel. Ability to develop and maintain records in an organized and efficient manner. Ability to work well with individuals in multiple departments and be detail oriented. Excellent verbal and written communication skills and regard for quality standards. Ductile or steel pipe knowledge is an advantage. Additional Notes Pre-employment drug testing shall be required. All applicants shall be authorized to work in the U.S. COMPENSATION AND BENEFITS After 30 days of employment, employee is eligible for company benefits including medical, dental, vision, sick pay, vacation accruals, and 401(k).

Xylem is a Fortune 500 global water solutions company dedicated to advancing sustainable impact and empowering the people who make water work every day. As a leading water technology company with 23,000 employees operating in over 150 countries, Xylem is at the forefront of addressing the world's most critical water challenges. We invite passionate individuals to join our team, dedicated to exceeding customer expectations through innovative and sustainable solutions. Xylem is seeking a Quality Inspector responsible for performing inspections on incoming materials, parts, and assemblies to ensure compliance with engineering drawings, specifications, and quality standards. This role plays a key part in maintaining product integrity and supporting continuous improvement within our manufacturing operations. Essential Duties and Responsibilities Inspect incoming materials and finished assemblies for compliance with standards, drawings, and purchase order requirements. Document inspection results through receiving and final inspection reports. Generate Product Inspection Reports (PIRs) for all non-conforming materials. Collaborate with Quality Engineering to identify root causes and assist in implementing corrective actions. Perform additional quality-related tasks as assigned. Availability to work Monday through Saturday as needed. Minimum Qualifications High school diploma or GED required. Minimum of 2 years of experience in dimensional inspection. Ability to read and interpret engineering drawings. Proficient in the use of standard inspection tools and measuring equipment. Strong attention to detail and effective communication skills. Preferred Qualifications Experience in a pump fabrication or machine shop environment. Basic computer skills and familiarity with ISO 9000 quality standards. Physical Demands Ability to stand or sit for 8+ hours per shift. Frequent reaching, walking, pushing, pulling, and lifting. Must be able to lift and handle parts up to 35 lbs.; heavier items will be lifted using a hoist. Work Environment Typical manufacturing shop environment with seasonal temperature changes. Exposure to noise-ear protection required. Work around electrical components, motors, and wiring. Required PPE includes: safety glasses, ear plugs, safety shoes (with toe and metatarsal guards), gloves, and work uniform. Join the global Xylem team to be a part of innovative technology solutions transforming water usage, conservation, and re-use. Our products impact public utilities, industrial sectors, residential areas, and commercial buildings, with a commitment to providing smart metering, network technologies, and advanced analytics for water, electric, and gas utilities. Partner with us in creating a world where water challenges are met with ingenuity and dedication; where we recognize the power of inclusion and belonging in driving innovation and allowing us to compete more effectively around the world. At Xylem, you'll not only contribute to solving water issues but also have the chance to make a difference through our paid Volunteer Program, Xylem Watermark. We prioritize our employees' well-being through inclusion and belonging as well as our Employee Resource Groups (ERG). Proud to be an Equal Employment Opportunity (including disability and veterans) and Affirmative Action workplace, Xylem fosters an inclusive environment free from discrimination or harassment. Please note that the information in this outlines the general nature of the position and is not an exhaustive list of duties. Xylem is dedicated to providing reasonable accommodations to enable all employees to perform their essential job functions. We reserve the right to modify this job description and assign additional duties as needed. Embrace the opportunity to be part of Xylem's transformative journey in shaping the future of water technology! #XylemCareers #GlobalImpact #WaterInnovation

Job Description Decima International is a professional services company, providing project management and controls services to clients in the United States and the Middle East. Our mission is to become the premier professional services provider across all industry sectors we are engaged in. To accomplish this, Decima International's founders established a simple yet powerful formula: Approach each client engagement as a partnership, create an environment that attracts the most talented professionals and allows them to flourish, and regulate growth to maintain excellence in our service standards. If you are interested in a long and rewarding career working with high-profile clients on some of the most challenging projects in the world, then Decima is where you belong. At Decima, you will be able to explore incredible growth and professional development opportunities. We are looking for a driven and capable Mechanical QA Inspector to support us with the development of multiple hyperscale data center projects for one of our top technology clients. This is a client-facing role that requires strong interpersonal, communication and organizational skills, ability to self-direct, client representation, and an emphasis on strong project management fundamentals. Must be able to manage multiple projects concurrently. A strong background in data center development, design, engineering, controls, and operations requirements is a big plus. You will play an integral role in ensuring the development and implementation of the Quality Management System (QMS) in addition to the coordination, performance, and completion of all construction audits and commissioning services of the project. The Mechanical QA Inspector is accountable for the quality of work performed, compliance with building codes, safety regulations, as well as meeting the project's contractual requirements set forth by the client. We are looking to bring in dedicated individuals with a passion for innovation and talent for multitasking in a fast-paced environment. We will help you grow, pursue, and fulfill what inspires you so we can make big impacts on the world, together. RESPONSIBILITIES Understand the project scope and requirements. Ensure compliance with quality standards, building codes, safety regulations, and environmental guidelines. Review and verify material submittals for A/E and Client approval. Confirm delivered materials match approved submittals. Manage and review submittals, RFI logs, maintenance logs, and other project documents promptly. Update QC punch lists and coordinate with general contractors (GC) and subcontractors for completion. Conduct internal quality audits and site inspections. Adhere to Quality, Health, Safety, & Environment (HSE) standards. Provide technical support to address operational challenges and client concerns. Plan and inspect Definable Features of Work (DFWs). Develop and implement Audit and Test Plans for quality inspections and testing. Maintain and update Quality manuals, checklists, and forms. Collaborate with third-party QA/QC firms as needed. Participate in Quality Management System (QMS) audits. Build relationships with project partners, consulting engineering firms, public agencies, and clients. Ensure document control compliance and maintain project submittal logs and quality control reports. Verify and document material compliance with approved submittals. Compile and forward project closeout documents, including O&M manuals, as-builts, and warranties. Investigate and address non-conformance issues promptly. Ensure calibration of inspection, measurement, and test equipment. Liaise with the General Contractor, Client, and Project Management team to resolve quality issues. Prepare presentations on progress, findings, and recommendations for management. Review subcontractors' submittals for compliance. Coordinate and monitor subcontractors, suppliers, direct labor, and materials. Collaborate with public utility suppliers for final service connections. Coordinate activities of inspection agencies. Achieve required MEPS and electromechanical inspections. Assist in preparing periodic QA/inspection progress reports. Review and approve subcontractor work percentages. Oversee commissioning processes. Manage the MEP project closeout to ensure all requirements are met. QUALIFICATIONS Required Qualifications: 15+ years of construction and quality management experience. Bachelor's degree in mechanical, electrical engineering, or a related field. Experience with managing field engineering, inspection, and NDE related to all QA/QC functions. Proficient with reading, understanding, and interpreting plans, specifications, drawings, contracts, and other documents pertaining to MEP aspects of projects. Ability to develop and manage non-conformance, defects, and reporting programs, including root cause analysis. Ability to ensure correct codes, standards, job specifications, project procedures, and federal and provincial regulations are properly identified, correctly specified in detail, and met or exceeded. Ability to work in high-production environments and respond quickly and effectively under pressure and deadlines while maintaining a professional demeanor. Technical knowledge of materials and construction concepts. Experience working as a Mechanical Quality Supervisor for large commercial, industrial, or mission-critical facilities construction projects. An excellent understanding of construction Quality Management Systems (QMS). Familiarity with punch list procedures and project closeout processes. Strong attention to detail and excellent analytical skills. Strong knowledge of high, medium, and low-voltage systems, HVAC, control systems, commissioning, LEED/Green building projects, and general ground-up construction projects as applicable to MEPS. Preferred Qualifications: Project Management Professional (PMP) certification. Construction Quality Manager Certification (CCQM) US Army Corps of Engineers (USACE) Certified Quality Auditor (CQA) Member of the American Society for Quality Six Sigma Certifications ISO 9001 Green Business Certification (LEED) Strong background in data center development and construction POSITION DETAILS: Primary Location (on-site): Abernathy, Texas Position: Mechanical QA Inspector Position Classification: Salary-based full-time hours Travel: 10% travel expected Current US work permit required. This position does not offer sponsorship for employment (e.g., H-1B visa sponsorship or transfer not offered) PRODUCTIVITY TOOLS: Microsoft Office Microsoft 365 CxAlloy Decima International is an Equal Opportunity Employer who is committed to the safety and wellbeing of all. All qualified applicants will receive consideration for employment without regard to race, religion, creed, color, national origin, ancestry, sex (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, medical condition, marital or domestic partner status, sexual orientation, gender, gender identity, gender expression and transgender status, mental disability or physical disability, genetic information, military or veteran status, citizenship, low-income status or any other status or characteristic protected by applicable law. At Decima International, we offer a competitive salary package, including paid time off and performance-based bonuses. We also provide excellent medical, vision and dental insurance for our employees.

Decima International is a professional services company, providing project management and controls services to clients in the United States and the Middle East. Our mission is to become the premier professional services provider across all industry sectors we are engaged in. To accomplish this, Decima International's founders established a simple yet powerful formula: Approach each client engagement as a partnership, create an environment that attracts the most talented professionals and allows them to flourish, and regulate growth to maintain excellence in our service standards. If you are interested in a long and rewarding career working with high-profile clients on some of the most challenging projects in the world, then Decima is where you belong. At Decima, you will be able to explore incredible growth and professional development opportunities. We are looking for a driven and capable Mechanical QA Inspector to support us with the development of multiple hyperscale data center projects for one of our top technology clients. This is a client-facing role that requires strong interpersonal, communication and organizational skills, ability to self-direct, client representation, and an emphasis on strong project management fundamentals. Must be able to manage multiple projects concurrently. A strong background in data center development, design, engineering, controls, and operations requirements is a big plus. You will play an integral role in ensuring the development and implementation of the Quality Management System (QMS) in addition to the coordination, performance, and completion of all construction audits and commissioning services of the project. The Mechanical QA Inspector is accountable for the quality of work performed, compliance with building codes, safety regulations, as well as meeting the project's contractual requirements set forth by the client. We are looking to bring in dedicated individuals with a passion for innovation and talent for multitasking in a fast-paced environment. We will help you grow, pursue, and fulfill what inspires you so we can make big impacts on the world, together. RESPONSIBILITIES Understand the project scope and requirements. Ensure compliance with quality standards, building codes, safety regulations, and environmental guidelines. Review and verify material submittals for A/E and Client approval. Confirm delivered materials match approved submittals. Manage and review submittals, RFI logs, maintenance logs, and other project documents promptly. Update QC punch lists and coordinate with general contractors (GC) and subcontractors for completion. Conduct internal quality audits and site inspections. Adhere to Quality, Health, Safety, & Environment (HSE) standards. Provide technical support to address operational challenges and client concerns. Plan and inspect Definable Features of Work (DFWs). Develop and implement Audit and Test Plans for quality inspections and testing. Maintain and update Quality manuals, checklists, and forms. Collaborate with third-party QA/QC firms as needed. Participate in Quality Management System (QMS) audits. Build relationships with project partners, consulting engineering firms, public agencies, and clients. Ensure document control compliance and maintain project submittal logs and quality control reports. Verify and document material compliance with approved submittals. Compile and forward project closeout documents, including O&M manuals, as-builts, and warranties. Investigate and address non-conformance issues promptly. Ensure calibration of inspection, measurement, and test equipment. Liaise with the General Contractor, Client, and Project Management team to resolve quality issues. Prepare presentations on progress, findings, and recommendations for management. Review subcontractors' submittals for compliance. Coordinate and monitor subcontractors, suppliers, direct labor, and materials. Collaborate with public utility suppliers for final service connections. Coordinate activities of inspection agencies. Achieve required MEPS and electromechanical inspections. Assist in preparing periodic QA/inspection progress reports. Review and approve subcontractor work percentages. Oversee commissioning processes. Manage the MEP project closeout to ensure all requirements are met. QUALIFICATIONS Required Qualifications: 15+ years of construction and quality management experience. Bachelor's degree in mechanical, electrical engineering, or a related field. Experience with managing field engineering, inspection, and NDE related to all QA/QC functions. Proficient with reading, understanding, and interpreting plans, specifications, drawings, contracts, and other documents pertaining to MEP aspects of projects. Ability to develop and manage non-conformance, defects, and reporting programs, including root cause analysis. Ability to ensure correct codes, standards, job specifications, project procedures, and federal and provincial regulations are properly identified, correctly specified in detail, and met or exceeded. Ability to work in high-production environments and respond quickly and effectively under pressure and deadlines while maintaining a professional demeanor. Technical knowledge of materials and construction concepts. Experience working as a Mechanical Quality Supervisor for large commercial, industrial, or mission-critical facilities construction projects. An excellent understanding of construction Quality Management Systems (QMS). Familiarity with punch list procedures and project closeout processes. Strong attention to detail and excellent analytical skills. Strong knowledge of high, medium, and low-voltage systems, HVAC, control systems, commissioning, LEED/Green building projects, and general ground-up construction projects as applicable to MEPS. Preferred Qualifications: Project Management Professional (PMP) certification. Construction Quality Manager Certification (CCQM) US Army Corps of Engineers (USACE) Certified Quality Auditor (CQA) Member of the American Society for Quality Six Sigma Certifications ISO 9001 Green Business Certification (LEED) Strong background in data center development and construction POSITION DETAILS: Primary Location (on-site): Abernathy, Texas Position: Mechanical QA Inspector Position Classification: Salary-based full-time hours Travel: 10% travel expected Current US work permit required. This position does not offer sponsorship for employment (e.g., H-1B visa sponsorship or transfer not offered) PRODUCTIVITY TOOLS: Microsoft Office Microsoft 365 CxAlloy Decima International is an Equal Opportunity Employer who is committed to the safety and wellbeing of all. All qualified applicants will receive consideration for employment without regard to race, religion, creed, color, national origin, ancestry, sex (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, medical condition, marital or domestic partner status, sexual orientation, gender, gender identity, gender expression and transgender status, mental disability or physical disability, genetic information, military or veteran status, citizenship, low-income status or any other status or characteristic protected by applicable law. At Decima International, we offer a competitive salary package, including paid time off and performance-based bonuses. We also provide excellent medical, vision and dental insurance for our employees.

The Site Templater plays a critical role in obtaining accurate measurements for countertop fabrication and installation. This position requires precision, strong communication, and knowledge of stone fabrication processes. The role involves daily travel to job sites, interaction with customers, and collaboration with production teams to ensure accurate templates and successful project outcomes. ESSENTIAL FUNCTIONS: Travel daily to residential and commercial job sites to take precise measurements. Create dimensional drawings based on field measurements (tract and custom jobs). Take site photos and confirm placement of sinks, backsplashes, and other features with customers. Confirm countertop details (stone type, color, edge profile, etc.). Translate field drawings into digital templates using AutoCAD or laser equipment. Operate CAD software to produce accurate installation plans. Communicate with other departments regarding modifications or clarifications to templates. Identify and document site issues, reporting them clearly on drawings. Collaborate with production planning and fabrication teams to align templates with available materials. Maintain accurate logs of drawings, templates, and revisions in company systems (e.g., SPS). Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions. QUALIFICATIONS (EDUCATION, CERTIFICATIONS, AND/OR TRAINING): Preferred Education: Associate degree in Draft or Civil Engineering preferred Knowledge of stone fabrication and installation processes Required Education: High school diploma, or equivalent Valid driver's license Preferred Experience: Experience using laser measuring equipment or paper templating Required Experience: 1 to 2 years' experience in operating CAD software (AutoCAD preferred). Field experience in countertop fabrication, templating, or installation. ESSENTIAL KNOWLEDGE, SKILLS, AND ABILITIES (KSA): Knowledge: Countertop fabrication and installation methods. CAD software for drawing and planning. Reading and analyzing architectural plans and layouts. Skills: CAD proficiency for simple-to-moderate drawings. Excellent communication and customer interaction skills. Strong organizational and time-management skills. Abilities: Accurately record measurements using tapes, lasers, or templating machines. Produce clear, legible, and accurate field drawings. Work independently with minimal supervision while managing multiple site visits. Troubleshoot site conditions and provide practical solutions. WORK ENVIRONMENT: This position will be primarily performed in the field, with frequent site visits to active construction environments. It will also involve working at our office, where drawing reviews and digital templating will be performed. Finally, this position will also involve occasionally working in fabrication facilities. PHYSICAL DEMANDS: Regularly required to walk, stand, kneel, squat, bend, and maneuver in construction environments. Must be able to lift and handle template materials and tools. Frequent eye-hand coordination required for measurements and CAD work. TRAVEL REQUIREMENTS: This position will involve regular, frequent travel to construction sites within the Houston area, as well as to our office and manufacturing facilities, as well as third-party facilities and offices. ABOUT ALLIED STONE INC.: With over 20 years of experience, Allied Stone Inc. is a trusted leader in high-quality stone fabrication. We foster long-lasting partnerships with major suppliers to ensure consistent quality at competitive prices. Our trendsetting designers, skilled craftsmen, and cutting-edge technology create seamless client experiences, resulting in unrivaled finished spaces. ALLIED STONE INC. OFFERS: Competitive salaries and comprehensive benefits. Ongoing learning opportunities within a diverse, inclusive, and rewarding work environment. AFFIRMATIVE ACTION/EEO STATEMENT: Allied Stone Inc. is committed to providing equal employment opportunities for all individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other characteristic protected by applicable law. We embrace diversity and encourage a work environment where differences are respected and valued. OTHER DUTIES: This job description is not designed to cover or contain a comprehensive listing of duties or responsibilities required of the employee. Duties and responsibilities may change at any time with or without notice.

Decima International is a professional services company, providing project management and controls services to clients in the United States and the Middle East. Our mission is to become the premier professional services provider across all industry sectors we are engaged in. To accomplish this, Decima International's founders established a simple yet powerful formula: Approach each client engagement as a partnership, create an environment that attracts the most talented professionals and allows them to flourish, and regulate growth to maintain excellence in our service standards. Decima International is a professional services company, providing project management and controls services to clients in the United States and the Middle East. Our mission is to become the premier professional services provider across all industry sectors we are engaged in. To accomplish this, Decima International's founders established a simple yet powerful formula: Approach each client engagement as a partnership, create an environment that attracts the most talented professionals and allows them to flourish, and regulate growth to maintain excellence in our service standards. If you are interested in a long and rewarding career working with high-profile clients on some of the most challenging projects in the world, then Decima is where you belong. At Decima, you will be able to explore incredible growth and professional development opportunities. We are looking for a driven and capable Civil Structure Architecture QA Inspector to support us with the development of multiple data center projects for one of the top technology clients in the world. This is a client-facing role that requires strong interpersonal, communication, and organizational skills, the ability to self-direct, client representation, and an emphasis on strong project management fundamentals. Must be able to manage multiple projects concurrently and across multiple regions. A strong background in data center development, design, engineering, controls, and operations requirements is a big plus. You will play an integral role in ensuring the implementation and management of the Quality Management System (QMS) in addition to the coordination, performance, and completion of all construction inspection and testing services of a project. The Civil Structure Architecture QA Inspector is accountable for the guarantee of the work performed, as well as meeting the project's contractual requirements set forth by the client. We are looking to bring in dedicated individuals with a passion for innovation and talent for multitasking in a fast-paced environment. We will help you grow, pursue, and fulfill what inspires you so we can make big impacts on the world, together. RESPONSIBILITIES Develop a sound knowledge of the project scope and requirements. Ensure compliance with stringent contract and owner quality requirements. Prepare comprehensive, project-specific QC plans. Review and verify material submittals for A/E and Client review. Verify that delivered materials comply with approved submittals. Provide and review submittals, RFI logs, maintenance logs, and other project-related materials in a timely manner. Review and update QC punch lists and coordinate punch list completion with GC and subcontractors. Verify the implementation and operation of the quality assurance and control systems by planning and conducting internal quality audits and inspections of activities on site. Ensure implementation and continuous improvement in overall Quality Systems. Ensure that all contractual / company and local authority requirements for Quality, Health, Safety & Environment (HSE) requirements are complied with. Review, update, and verify the distribution of the Quality Management Procedure, Quality Manual, and related procedures for Infrastructure, MEP, Civil, and other subcontractors and divisions by the GC. Verify that GC implements adequate training/awareness of company personnel for Quality systems. Ensure that all non-conformance issues are promptly investigated, corrective and preventive actions are proposed/implemented, and are quickly closed out. Ensure that the contractual quality requirements of a project are fully communicated to all key personnel, so that their roles in fulfilling these requirements are fully understood. Ensure that all GC and subcontractors' quality systems and plans are acceptable to the company as applicable to the "Project Contract". Ensure that Subcontractors'/Suppliers' quality systems are implemented and effective. Ensure that the calibration of all inspection, measurement, and test equipment is conducted according to the defined schedule. Conduct reviews of the approved suppliers and subcontractors' list. Liaise with the General Contractor, Client, and Project Management team to ensure that all potential and actual quality issues are fully resolved. Establish a strong relationship with the GC and Client, and communicate with both technical and management-level personnel. Prepare PowerPoint decks and present to management on progress, findings, and recommendations. Review project plans, requirements, and specifications. Perform other related duties as required and assigned. QUALIFICATIONS Required Qualifications: 15+ years of construction quality management experience. Bachelor's degree in Civil, Structural, Architectural Engineering, or a related field. Experience with managing field engineering, inspection, and NDE related to all QA/QC functions. Ability to develop and manage non-conformance, deficiencies, and reporting programs, including root cause analysis. Experience in developing and monitoring of project QA/QC budgets. Ability to ensure that correct codes, standards, job specifications, project procedures, and federal and provincial regulations are properly identified, correctly specified in detail, and met or exceeded. Must have the ability to work within strict deadlines and under pressure while maintaining a professional demeanor. Experience working as a QA/QC Manager for large Commercial, Industrial, or Mission-Critical Facilities construction projects. An excellent understanding of construction Quality Management Systems (QMS). Experience developing various types of reports, targeting different audiences. Experience in client-facing positions. Demonstrated ability to understand technical and complicated construction programs and the ability to communicate progress to both technical and management-level personnel. Strong communication skills, including the ability to communicate with any audience clearly and accurately. Proficient in Microsoft Office programs. Preferred Qualifications: Project Management Professional (PMP) certification. Certified Construction Manager (CCM) certification. Strong background in data center development and construction. POSITION DETAILS: Primary Location (On-site): Abernathy, Texas Position: CSA QA Inspector Position Classification: Salary-based full-time hours Current US work permit required. This position does not offer sponsorship for employment (e.g., H-1B visa sponsorship or transfer not offered) PRODUCTIVITY TOOLS: Microsoft Office Microsoft 365 Decima International is an Equal Opportunity Employer who is committed to the safety and wellbeing of all. All qualified applicants will receive consideration for employment without regard to race, religion, creed, color, national origin, ancestry, sex (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, medical condition, marital or domestic partner status, sexual orientation, gender, gender identity, gender expression and transgender status, mental disability or physical disability, genetic information, military or veteran status, citizenship, low-income status or any other status or characteristic protected by applicable law. At Decima International, we offer a competitive salary package, including paid time off and performance-based bonuses. We also provide excellent medical, vision and dental insurance for our employees.