Quality inspector jobs in Cedar Rapids, IA - 45 jobs

Job Title: Quality Control Inspector (Electrical Contractor) Employment Type: Full-Time We are seeking a Quality Control Inspector to oversee electrical construction activities on project sites, ensuring all work meets applicable codes, standards, and project specifications. This role plays a key part in promoting quality, safety, and compliance through inspections, documentation, and collaboration with field teams. Key Responsibilities: * Inspect electrical installations and verify compliance with NEC, NFPA, IEEE, and project requirements * Review drawings, specifications, and quality plans * Document inspections, test results, and non-conformance reports (NCRs) * Support field teams with quality assurance processes * Ensure adherence to safety protocols including LOTO and arc flash * Collaborate with project managers, subcontractors, and engineers to maintain high standards Qualifications: * Bachelor's degree in a related field (or equivalent experience) * Minimum 3 years of construction or field-related experience * Proficiency in Microsoft Office and willingness to learn platforms like Procore and Bluebeam * OSHA 30 preferred (or willingness to obtain) * Strong attention to detail, communication, and organizational skills Work Environment: Primarily based on active construction sites with occasional office visits. Must be available for non-standard hours during key construction phases. What We Offer: * Competitive Pay * Comprehensive Benefits Package with Tax-Advantaged HSA and FSA offerings * Employer-Paid Short- and Long-Term Disability Programs * Employer-Paid Life Insurance * Generous Paid Time Off Provisions * 401K Retirement Savings Plan with Company Match * Tuition Reimbursement * Fully Paid Parental Leave * Voluntary Products Including: Critical Illness Insurance and Accident Insurance * Corporate Wellness Program with Wellness Time Off and Rewards Visa sponsorship is not available for this position at this time. The Company does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of the Company without a prior written search agreement will be considered unsolicited and the property of the Company. Please, no phone calls or emails. The Weitz Company, LLC (and its U.S.-based subsidiaries and affiliates) recognizes the value of and is committed to hiring and retaining a diverse and inclusive workforce. We are an Equal Opportunity Employer and follow applicable affirmative action guidelines and policies. All qualified applicants will receive consideration for employment (including minorities, females, veterans, and individuals with disabilities, regardless of sexual orientation, gender identity, or other protected categories in accordance with applicable state and federal laws). The Company is a drug and alcohol-free workplace and background checks are required if applicable. Click here to review our Privacy Notice. Location Cedar Rapids, IA Department Safety & Quality Employment Type Full-Time Minimum Experience Experienced

Transco As a part of the global industrial organization Marmon Holdings-which is backed by Berkshire Hathaway-you'll be doing things that matter, leading at every level, and winning a better way. We're committed to making a positive impact on the world, providing you with diverse learning and working opportunities, and fostering a culture where everyone's empowered to be their best. Who We Are: Transco Railway Products, Inc. has been the leader in providing railcar maintenance and services to the railcar industry. We have earned the reputation for honesty, integrity, and superior quality which has allowed us to establish a committed customer base. Transco is part of Marmon - a strong, growing, global organization that consists of more than 100 autonomous manufacturing and service companies. Job Description: We are looking for a Quality Control Inspector to perform final inspections on railcars to ensure the required work is completed and in compliance with industry standards and customer requirements. The QC Inspector will also support the production team with other quality initiatives as needed. Job Requirements: Perform inspections of the final product to assess the quality of work performed and compliance to company standards using checklists, reports, forms, procedures, hand tools, gauges, and test instruments. Work with production to identify and plan for the day's shipments to ensure verifications and inspections are made in a timely manner. Ability to use railroad gauges, testing techniques, and test equipment necessary for railcar inspections. Report adverse and/or non-compliant items to the responsible supervisor and QA Manager and follows-up to confirm that remedies have been put in place on items before the car is released to subsequent processes/stages. Communicate technical information verbally and in writing. Ability to instruct employees on proper railcar maintenance activities using established procedures and training materials. Able to perform tasks that require climbing and balancing on ladders and platforms. Verifies cars are properly secured and identified prior to being released. Able to pass drug screen and physical. What We Offer: Transco strives to be the Employer of Choice. Our generous benefits package includes: Benefits on Day 1 Medical/Dental/Vision with first in class vendors Health Savings Account Flexible Spending Account (Medical and Dependent Care) Company Paid Benefits: Short Term Disability, Long Term Disability, Life Insurance Employee Assistance Program 4 weeks of Paid Parental Leave Vacation Benefits 401k with generous company match and additional employer annual contribution Don't worry if you think that you do not meet all the qualifications. The tools, technology, and methodologies we use are constantly changing and we value talent and interest over specific experience. It is the policy of Transco to provide equal employment opportunities to all qualified persons, and to recruit, hire, train, promote, and compensate persons in all job without regard to race, color, religion, sex, national origin, disability, or sexual orientation, gender identify, protected veteran status or any other protected characteristic protected by the law. Pay Range: 54,000.00 - 66,000.00 We offer a comprehensive benefits package that may include medical, dental, vision, 401k matching, and more! Following receipt of a conditional offer of employment, candidates will be required to complete additional job-related screening processes as permitted or required by applicable law. We are an equal opportunity employer, and all applicants will be considered for employment without attention to their membership in any protected class. If you require any reasonable accommodation to complete your application or any part of the recruiting process, please email your request to ******************, and please be sure to include the title and the location of the position for which you are applying.

Braun Intertec is seeking an Experienced Construction Materials Testing (CMT) Technician to join our Cedar Rapids office. As a technician, you will perform a variety of testing on construction materials such as soils, concrete, masonry, and asphalt. Onsite materials testing is conducted on various industrial, commercial and transportation construction projects located throughout the region. As a technician, you will receive in-depth technical training and industry certifications upon successful completion of examinations and demonstration of ability. This is a career opportunity to become a member of a highly successful, fast paced team with a steady and growing backlog of exciting projects for a 100% employee-owned company. Responsibilities: Perform routine & complex sampling and testing of soils, aggregates, concrete, masonry, and asphalt Perform field concrete testing, including slump, air content, and temperature Perform field density tests of soils Prepare daily reports and documentation of field activities in electronic format Work with project managers and senior technicians or staff to ensure specifications are followed Assist with training & mentoring of junior staff, as needed Qualifications: A strong safety focus and attention to detail Excellent plan reading skills A demonstrated math and technical aptitude Flexibility to work extended or nontraditional hours as needed Excellent verbal and written communication skills State DOT certifications, and/or NICET certifications ICC Concrete and Soils Certification preferred or must be willing to get within 90 days of hire. ACI Concrete Field-Testing Certification Required. 1+ years of construction materials testing experience A High School diploma or equivalent A valid driver's license The ability to lift 75+ pounds Comfortable working outdoors in varying weather conditions Ability to reach with hands and arms, climb or balance, and stoop, kneel, crouch or crawl At times, this position may be working at or on uneven terrain, varying heights, in confined spaces, or supported trenches Check out this video to see what life is like as a CMT: **************************** At Braun Intertec, employees are encouraged to expand their skills and certifications through company provided training and mentoring. Braun Intertec offers a competitive compensation and benefits package, including medical, dental, vision, life insurance, 401(k) plan, PTO, Employee Stock Ownership Program (ESOP), and paid holidays. #LI-MB1 Compensation Range: $48,000.00 - $72,000.00 As an EEO/Affirmative Action Employer, all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, veteran or disability status. Braun Intertec strives to ensure that its careers web site is accessible to all. If you need assistance completing your online application, please email ************************. As an Equal Opportunity Employer, Braun Intertec is committed to providing reasonable accommodations for qualified individuals with disabilities and disabled veterans. If you need a reasonable accommodation to assist with your job search or application for employment, please e-mail us at ************************. In your e-mail, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.

Mestek Machinery is the industry-leading designer and manufacturer of the most complete, productive, and innovative metal forming solutions for the fabrication of HVAC sheet metal ductwork and fittings. Our family of companies -- Lockformer, Engel, Iowa Precision, Roto-Die, have decades of experience addressing every facet of the HVAC duct industry. The result is a combined knowledge and experience that develops cutting edge, precision technology and automated manufacturing equipment that improves productivity while ensuring the highest-quality finished ducts and fittings. JOB DESCRIPTION Quality Tech will conduct routine quality inspections throughout production, including in-process and final inspections of new machinery. ESSENTIAL DUTIES * QC inspection of all new equipment. * Conduct reviews of checklists for compliance with equipment specification standards per customer purchase agreements. * Is a liaison between production and engineering for technical updates. * Will participate in overflow part quality check as needed for machining operation. * Design and implement methods for process control, process improvement, testing and inspection. * Record and maintain documentation of all machinery inspections. * Work with the safety committee to ensure continuous compliance with all environmental, health, and safety (EHS) regulations and standards. * Identify and troubleshoot quality issues and recommend solutions. * Collaborate and train production staff in quality control procedures and standards. * Participate in continuous improvement initiatives to enhance quality control processes. * Communicate quality control findings and recommendations to management. * Support Service as needed with new equipment installations. * Performs assumes other duties and responsibilities as may be required. EDUCATION AND EXPERIENCE * Associate Engineer Degree or equivalent, electrical or mechanical. * A minimum of 3 years' experience in a manufacturing environment. * Thoroughly versed in the use of an array of electronic test equipment. * Understand basic electrical and mechanical engineering principles. * Understand basic pneumatic/hydraulic fundamentals. * Diverse knowledge of inspection and control methods, techniques and documentation. * Excellent communication skills (written and verbal). * Ability to use a variety of precision measuring tools, including micrometers and calipers. * Demonstrated ability to work independently with minimal supervision. * Strong computer skills including QA applications, word processing, spreadsheets and databases.

Job DescriptionSalary: Job Title: Quality Control Inspector (Electrical Contractor) Employment Type: Full-Time We are seeking a Quality Control Inspector to oversee electrical construction activities on project sites, ensuring all work meets applicable codes, standards, and project specifications. This role plays a key part in promoting quality, safety, and compliance through inspections, documentation, and collaboration with field teams. Key Responsibilities: Inspect electrical installations and verify compliance with NEC, NFPA, IEEE, and project requirements Review drawings, specifications, and quality plans Document inspections, test results, and non-conformance reports (NCRs) Support field teams with quality assurance processes Ensure adherence to safety protocols including LOTO and arc flash Collaborate with project managers, subcontractors, and engineers to maintain high standards Qualifications: Bachelor's degree in a related field (or equivalent experience) Minimum 3 years of construction or field-related experience Proficiency in Microsoft Office and willingness to learn platforms like Procore and Bluebeam OSHA 30 preferred (or willingness to obtain) Strong attention to detail, communication, and organizational skills Work Environment: Primarily based on active construction sites with occasional office visits. Must be available for non-standard hours during key construction phases. What We Offer: Competitive Pay Comprehensive Benefits Package with Tax-Advantaged HSA and FSA offerings Employer-Paid Short- and Long-Term Disability Programs Employer-Paid Life Insurance Generous Paid Time Off Provisions 401K Retirement Savings Plan with Company Match Tuition Reimbursement Fully Paid Parental Leave Voluntary Products Including: Critical Illness Insurance and Accident Insurance Corporate Wellness Program with Wellness Time Off and Rewards Visa sponsorship is not available for this position at this time. The Company does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of the Company without a prior written search agreement will be considered unsolicited and the property of the Company. Please, no phone calls or emails. The Weitz Company, LLC (and its U.S.-basedsubsidiaries and affiliates) recognizes the value of and is committed to hiring and retaining a diverse and inclusive workforce.We are an Equal Opportunity Employer and follow applicable affirmative action guidelines and policies. All qualified applicantswill receive consideration for employment (including minorities, females, veterans, and individuals with disabilities, regardless of sexual orientation, gender identity, or other protected categories in accordance with applicablestate and federal laws). The Company is a drug and alcohol-free workplace and background checks are required if applicable.Click hereto review our Privacy Notice. Location Cedar Rapids, IA Department Safety & Quality Employment Type Full-Time Minimum Experience Experienced

Quality Control Inspector Company: Loenbro - Industrial Services Group Reports To: Regional Quality Manager Do you want to work for an industry leading, growing, diversified employer who believes in doing what we say, leading by example, doing the right thing, and practicing stewardship? Loenbro is a leader in the industrial services space who strives to be more than just a contractor to our customer, but a business partner who provides superior quality and service. This is your opportunity to work for a great employer who puts employees and their customers first. We have worked hard to build and maintain our reputation and are looking for industrious, conscientious, and motivated individuals to join our team. We encourage you to visit our website at *************** to learn more about our organization and who we are. Position Overview: We are looking for an experienced initiative-taking QC Inspector to join our growing Industrial Construction team. This position will be responsible for the duties listed below along with other related functions. A team-oriented mentality and the drive to continuously improve is what sets the Loenbro team at the top of the industry. This position works closely with related engineering, construction, fabrication, and other departments to ensure that the team's aligned goals are met. Employee will be expected to travel to remote jobs as needed throughout the intermountain region and possibly beyond Job Duties: * Weld Map Isometric drawings. * Enter welding and inspection information into tracking tools. * Assist with pressure testing plans and functions. * Review and File NDE/NDT Reports. * Work with NDE personnel for planning and execution of work. * Assemble and review project documentation packages. * Perform and document inspections based on drawings, specifications, and procedures to determine compliance. * Perform weld inspections. * Review welding requirements and ensure welding procedures comply. * Create and implement Project Quality Assurance Plans. * Provide support and training to other inspectors. * Write inspection and assess plans (I&TP's). * Committed to Loenbro's core values and safety policies. Skills/Qualifications: * Have a current AWS CWI or ASNT VT II or ability to pass the VT II exam. * Knowledge of NDT methods (UT, MT, PT, RT) with ASNT-SNT-TC-1A documented training/hands on hours. * Well-rounded with ASTM standards and materials. * Efficient in Microsoft Excel and Word. * Ability to communicate effectively with co-workers Quality Control Inspector. * Excellent interpersonal written and verbal communication skills. * Elevated level of organizational skills. * Extensive knowledge of reading and understanding drawings. * Must be a quick learner and motivated. * Ability to travel and relocate as needed. * Initiative-taking with the drive to learn and grow. * Must be able to work as a team. Essential Requirements: * Comply with all company policies and procedures. * Ability to work in a challenging environment. * Climbing up and down stairs and ladders while working on scaffolds and in trenches to access work. * Lifting up to 50 pounds. * Walking on uneven terrain for extended periods. * Standing for extended periods. * The use of respirators if required by projects Quality Control Inspector. * Driving if required to travel to and from locations. * Occasionally you may need to kneel, reach, or stoop. * If driving is required, a valid driver's license and proof of insurability is required. All drivers are subject to a DMV background records search. Benefits * Personal Time Off (PTO). * Holidays: 6 paid holidays. * Health Benefits: All employees are eligible for medical, dental, vision and life insurance coverage. * 401(k) Retirement: The Company provides a 100% match of the first 4% of employees' contribution each year, to the plan. Eligibility is immediately following 90 days of employment. We are "Leading the Change" in the Energy Services Industry. Our growth and successes have not changed who we are. We live our core values every day. WE TAKE ACTION WE DO WHAT WE SAY WE LEAD BY EXAMPLE WE DO THE RIGHT THING WE PRACTICE STEWARDSHIP Loenbro is an Equal Opportunity Employer.

Job Description A Quality Inspector in a heavy manufacturing setting. A Quality Inspector is responsible for reviewing products and materials during manufacturing to make sure they meet company requirements. The duties include measuring objects compared to intended physical specifications, running quality tests and identifying defects. Essential Duties and Responsibilities: Determines quality and reliability standards by studying drawings and formulas; verifying specifications with engineering staff. Identifies raw material conditions by collecting samples; conducting inspections and physical test of materials. Identifies in-process product condition by collecting samples during productions process; conducting in-process inspections and physical tests. Determines disposition of finished product by collecting, classifying, analyzing, and interpreting production and quality data; judging product acceptability in comparison to specifications. Determines acceptability of rework by conducting inspections and physical tests of reworked product. Documents finished product status by recording and summarizing raw materials, in-process, and finished-product inspection and physical test data; updating quality assurance data base. Maintains product quality documentation system by writing or rewriting quality assurance procedures. Maintains quality assurance operations by following quality assurance policies and procedures; reporting needed changes. Contributes to team effort by accomplishing relating results as needed. . Education and Experience: High School diploma or equivalent. Expert knowledge of quality expectations and standards. Proven ability to read and interpret blue prints. General understanding of hydraulic, electrical and air systems. General understanding of welding and weld quality. General understanding of paint process and quality.

The Quality Control Technician oversees and inspects products to ensure standards are met, and/or repairs in the shop ensuring proper procedures are followed to improve effciency and results. The employee also ensures that the shop is clean and organized and makes adjustments when applicable. JOB DUTIES Provides assistance to the technicians when necessary regarding quality control procedures. Completes documentation to show that that tests have been carried out and records whether the product meets the standards or not. May monitor serialized products and maintain inspection logs. May work with other teams to find solutions and implement new protocols and procedures in response to deviations. May help drive results in the shop by using Lean and Six Sigma methodologies. Ensures there is a clean, organized, and efficient environment within the shop by sustaining individual accountability of all team members. Performs other duties as assigned. Inspects products using specialized equipment and/or monitors repair practices to ensure compliance with quality control procedures. EDUCATION & EXPERIENCE Typically requires a high school diploma or GED and zero (0) to three (3) years of experience or an equivalent combination KNOWLEDGE, SKILLS, ABILITIES Familiar with industrial repair parts and processes a plus. Must be knowledgeable in 5s Lean or Six Sigma methodologies. Lean/ Six Sigma Green Belt is a plus. Very organized and detailed oriented individual. COMPANY INFORMATION: Motion offers an excellent benefits package which includes options for healthcare coverage, 401(k), tuition reimbursement, vacation, sick, and holiday pay. Not the right fit? Let us know you're interested in a future opportunity by joining our Talent Community on jobs.genpt.com or create an account to set up email alerts as new job postings become available that meet your interest! GPC conducts its business without regard to sex, race, creed, color, religion, marital status, national origin, citizenship status, age, pregnancy, sexual orientation, gender identity or expression, genetic information, disability, military status, status as a veteran, or any other protected characteristic. GPC's policy is to recruit, hire, train, promote, assign, transfer and terminate employees based on their own ability, achievement, experience and conduct and other legitimate business reasons.

Job Description Quality Control Technician Yes We are seeking a Quality Control Technician to support the inspection, validation, and continuous improvement of newly manufactured industrial machinery. This role is hands-on and embedded directly in production, working closely with engineering, manufacturing, and service teams to ensure equipment meets customer specifications and internal quality standards. This position plays a critical role in ensuring machinery is built right the first time-through in-process inspections, final equipment validation, and documentation. Key Responsibilities Perform quality inspections on all newly manufactured equipment, including in-process and final inspections Review inspection checklists to ensure compliance with customer purchase agreements and equipment specifications Serve as a liaison between Production and Engineering to communicate technical updates and quality requirements Support overflow part inspections for machining operations as needed Design and implement inspection, testing, and process control methods to improve quality outcomes Document and maintain records of all machinery inspections and quality findings Identify, troubleshoot, and recommend corrective actions for quality issues Collaborate with and train production staff on quality control standards and procedures Participate in continuous improvement initiatives related to quality, inspection, and process optimization Work with the safety committee to ensure compliance with environmental, health, and safety (EHS) standards Communicate quality findings, trends, and recommendations to leadership Support service teams as needed during new equipment installations Perform additional duties as required to support manufacturing and quality objectives Education & Experience Associate degree in Engineering or equivalent experience (electrical or mechanical preferred) Minimum of 3 years of experience in a manufacturing or industrial equipment environment Technical Skills Strong understanding of basic electrical and mechanical principles Working knowledge of pneumatic and hydraulic systems Experience using electronic test equipment Proficiency with precision measuring tools (micrometers, calipers, etc.) Knowledge of inspection and quality control methods, techniques, and documentation Additional Skills Strong written and verbal communication skills Ability to work independently with minimal supervision Comfortable working cross-functionally with production, engineering, and service teams Solid computer skills, including QA applications, spreadsheets, databases, and word processing

**Discover a more connected career** At TelCom Construction, LLC, as a Quality Control Field Technician, you'll ensure that construction or installation work meets specified standards by performing inspections, conducting tests, and monitoring compliance throughout projects. You'll address issues, document findings, and collaborate with teams to implement improvements and maintain high-quality outcomes **Connecting you to great benefits** + Weekly Paychecks + Paid Time Off, Parental Leave, and Holidays + Insurance (including medical, prescription drug, dental, vision, disability, life insurance) + 401(k) w/ Company Match + Stock Purchase Plan + Education Reimbursement + Legal Insurance + Discounts on gym memberships, pet insurance, and much more! **What you'll do** + Conduct quality inspections during the installation process to ensure work meets plans and specifications + Perform final inspections as requested by customers to ensure compliance with construction standards + Identify issues and report them to relevant team members for resolution + Record and follow up on non-compliance issues until they are resolved + Ensure all required testing is completed as specified and document the results + Follow installation milestones and support project activities as directed by management + Work overtime, travel, and handle on-call or after-hours responsibilities as needed, and perform duties in all weather conditions + Other duties as assigned IND1 **What you'll need** + To be 18 years of age or older + Authorization to work in the United States for this company + Valid State driver's license (cannot be Provisional), including an acceptable driving record + One year of relevant work experience Additional qualifications + Quality control experience preferred + Associates Degree in an industry related field or equivalent work experience + Knowledge and understanding of the telecommunication construction industry standard practices + Knowledge of Customer Installation Standards and Documentation **Physical abilities & exposures** + **Routinely** : work alone in remote locations, operate vehicle, squeeze, bend, stoop, stand, walking, climb stairs, use keyboard and mouse + **Occasionally** : work at heights, use ladder, life greater than 55 pounds **Why grow your career with us** Your career here is more than just a job - it's your pathway to opportunity. Our hands-on training, supportive environment, and responsive leadership connect you to work with purpose. Our commitment to you extends beyond professional development to a safety-first culture that ensures you can do what you do best, with peace of mind. **Building stronger solutions together** Our company is an equal-opportunity employer - we are committed to providing a work environment where everyone can thrive, grow, and feel connected. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

As a Quality Control Inspector, you are an invaluable manufacturing team member, ensuring the highest production quality from in-process inspections to final inspections. Inspect products and materials visually and with measurement tools like torque wrenches, micrometers, or calipers. Your job is to ensure our products are consistently high quality and adhere to relevant specifications. Support operations and quality teams regarding the quality of the products and materials, process scrap, perform rework and efforts and help solve problems by providing rejection information for root cause analysis. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. * Perform quality inspections to ensure products and materials meet standards, print and/or specifications * Conduct quality in process and final inspections * Document issues noticed during testing, measurement or visual inspection * Removing products that don't meet production standards * Accepting or rejecting finished products and discussing inspection results with the production team and Quality Engineers * Serve as the primary quality resource to operations * Interface with quality and operation representatives concerning quality problems * Directly support the Quality Engineer to adequately control the quality hold area and the disposition of materials and products. * Directly support Quality Engineer to evaluate causes of scrap and work toward the elimination of such defects * Coordinate with Operations and direct associates on quality standards * Regular and reliable attendance at work * Participate in all TVS SCS quality and excellence initiatives. Competencies * Attention to detail * Be able to follow inspection sheets and work instructions * Knowledge of basic math and computer skills * Ability to influence others to follow work instructions, rules and regulations * Strong leadership skills and teamwork mentality * Verbal and written communication skills * Dexterity, physical strength, and physical stamina * Conscientious * Adaptable * Initiative Physical Demands The physical demands described here are representative of those that an employee must meet to successfully perform the essential functions of this job. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The associate may occasionally be required to lift 51 pounds, anything greater than 51 pounds requires assistance. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Work Environment This job is performed in a busy warehouse environment with high forklift traffic. Warehouses are subject to seasonal temperatures. Steel-toed shoes, safety glasses and vests are required personal protective equipment (PPE). It is estimated a 10% office environment and 90% warehouse environment. Position Type/Expected Hours of Work Full Time, Non-Exempt. Schedule flexibility for extended or unplanned work hours is required. Travel Travel is not expected for this position. Education and Experience * High school diploma or GED certificate * Ability to read work instructions/inspection sheets and use precise measurement tools, such as a torque wrench, micrometer, and caliper * Attention to detail * Ability to follow verbal and written instructions * Valid driver's license and reliable transportation * Proficiency with Microsoft Office Suite including Excel, Word, and PowerPoint Other Duties Please note that this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities required of the employee for this job. Duties, responsibilities, and activities may change at any time, with or without notice. TVS SCS NA is committed to cultivating a diverse and inclusive culture as an EEO employer. The TVS SCS NA team does not discriminate against candidates and employees because of their disability, sex, race, gender identity, sexual orientation, religion, national origin, age, veteran status, or any other protected status under the law within any employment practices. We are pleased to provide reasonable accommodations to applicants; please contact [Hope Molyneaux, *********************] to request a reasonable accommodation. The employee selected for this role must be able to perform the position's essential functions satisfactorily. If requested, reasonable accommodation will be made to enable employees with disabilities to perform the essential functions of their job, absent undue hardship. TVS SCS NA complies with the CPRA: CALIFORNIA PRIVACY NOTICE **************************************************************************************************

Are you looking for Part-Time work? Less than 30 hours per week? Then Iowa Premium, a National Beef Company in Tama, Iowa, may be the place for you! We are seeking individuals interested in working part-time in our Quality Assurance department as Fabrication Quality Assurance Technician. If this is you, Apply TODAY!! Responsibilities Responsibilities for this position include but are not limited to: Fabrication Quality Assurance Technicians are responsible for monitoring product quality. Fabrication Quality Assurance Technicians are stationed at the end of production lines where they inspect various pieces of meat for adherence to specifications. Fabrication Quality Assurance Technicians are responsible for knowing the product specifications for the line they are working on and filling out an audit report form. Fabrication Quality Assurance Technicians must also follow and help enforce plant Good Manufacturing Procedures and Sanitation Standard Operating Procedures. Other Fabrication Quality Assurance Technician responsibilities include metal detector auditing and testing trim for E.coli, via N60 sampling. Other duties as assigned. This is a safety sensitive position. This is an on-site position. Qualifications Qualified candidates must be available to work Monday, Friday, and Saturday The ideal candidate for this position should possess the following: Strong written and verbal communication skills are necessary A knowledge of HACCP Process (Hazard Analysis Critical Control Points) Experience with email communications Microsoft Office (Excel) Beef products knowledge is preferred Ability to withstand extreme hot/cold environments Must be able to read, write and speak English This is an hourly, management support position. Must be available to work holidays Must be at least 18 years of age or older. Applicants must be authorized to work for ANY employer in the U.S. We are unable to provide visa sponsorship at this time. Company Overview Iowa Premium, a National Beef Company, is dedicated to being the premier supplier of premium family farm-raised corn-fed Black Angus beef. Our employees are key to our success. We offer a variety of employment opportunities in our production and packaging facility in Southeast Iowa. We strive to be a preferred employer in Tama County, whether it's measured by the number of people employed or the good we do in the community. Come join our family! National Beef is an equal opportunity employer committed to workplace diversity. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, natural origin, age, gender identity, protected veterans status, or status as a disabled individual.

The Weld Inspector is responsible for inspecting and testing welded joints of work in progress and completed units for defects, correct dimensions, strength, weld penetration and conformance. The Weld Inspector is also responsible for performing welding duties. Essential Duties and Responsibilities: Inspect and test welded joints of work in progress and completed units for visible defects, correct dimensions, joint strength, bead formation, weld penetration, and conformance with layouts, blueprints, work order specifications, and applicable codes or company policies. Apply knowledge of welding principles and metallurgical properties to detect flaws such as cracks, cold welds, spatter, and undercuts using tools like flashlights or magnifying glasses. This includes inspecting both manual and robotic welding. Verify cleaning, prepping, and painting procedures are followed and meet quality standards. Conduct stress testing on joints using applicable equipment or prepare and review test samples. Verify product alignment and dimensions; set up machines and fixtures for work in progress; complete first article inspections per company policy. Observe welders' techniques and performance in the weld shop to ensure adherence to standards. Mark defective pieces and recommend appropriate rework or scrapping procedures. Record inspection data and report findings to the Weld Shop Manager. Perform and assist in coordinating weld tests in accordance with the company's weld certification program. Maintain all required welding certifications: AWS D1.1, CWB S-Class, AWS-TKY, and CWB Certified Weld Supervisor for W47.1. Set up and operate welding equipment according to CWB-recommended parameters. Use a variety of power and hand tools to grind or chip off excess slag or spatter. Use E10 software proficiently to process inspected and completed parts, and follow all company procedures related to data entry and documentation. Share safety responsibility with the departmental manager; ensure all safety rules and procedures are followed. Report any safety concerns. Document and notify the Weld Shop Manager of quality issues, including written descriptions, photos, employee name/number, and recommended repair procedures. Notify the Weld Shop Manager and/or Maintenance of equipment issues, and communicate blueprint or design changes to appropriate departments, always including the Weld Manager in these updates. Report any quality, safety, or production issues to the Weld Manager immediately. Collaborate with the Weld Manager to ensure efficient workflow and achieve goals for quality, volume, and efficiency. Remain flexible with duties; assisting team members in tasks such as tacking, welding, painting, material handling, pipe rolling, etc. Be a team player and role model. Promote a positive work atmosphere focused on cooperation, productivity, and the strategic plan. Assist with employee training and serve as a mentor when directed by management. Keep the work area clean and organized; support others in maintaining shop cleanliness. Understand that Senior Management or the Weld Manager may adjust work hours based on business needs or workflow demands. Perform any other duties as assigned. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Maintain welding certifications in accordance with our welding certification program: AWS D1.1, CWB S class, AWS-TKY. Weld Inspectors must always keep their AWS certified weld inspector certifications current according to AWS standards and their CWB certified weld supervisor certification for W47.1 * Know the welding processes including our welding certification process. * Read and comprehend engineered drawings, blueprints, specifications, policies and procedures, work order specifications, and code books. * Be professional and cordial to all team members at all times; take direction and constructive criticism well from management; display a positive attitude and be a team player; use strong communication skills, especially interpersonal skills; handle the position under time constraints and stress. * Ensure tasks are executed in the most effective manner in regards to time, cost and function and perform work at a high standard level - maintain strong quality control in the welding department. * Interpret * Safely use hand grinders, hammers, chisels, chippers, punches, torches, hand plaz, welding machines, forklifts, calipers, micrometers or any other weld measuring tools, band saws, chop saws, forklift * Strive for ongoing self-improvement through training, classes, advanced welding techniques, and other appropriate training. * Have computer experience. Mathematical Skills: Use basic math skills such as addition, subtraction, division, multiplication, and any other calculations as it pertains to a certified weld inspector. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the employee is regularly required to stand; walk; use hands to finger, handle, or feel and reach with hands and arms. The employee is frequently required to talk or hear. The employee is occasionally required to climb or balance and stoop or kneel. The employee must regularly lift and/or move up to 50 pounds safely. Specific vision abilities required by this job include peripheral vision, depth perception and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is exposed to hot humid conditions or cold conditions. Could be required to work outside in a variety of weather conditions including hot or cold temperatures, rain, or snow. The employee is exposed to fumes or airborne particles. The noise level in the work environment is usually loud.

Mestek Machinery is the industry-leading designer and manufacturer of the most complete, productive, and innovative metal forming solutions for the fabrication of HVAC sheet metal ductwork and fittings. Our family of companies -- Lockformer, Engel, Iowa Precision, Roto-Die, have decades of experience addressing every facet of the HVAC duct industry. The result is a combined knowledge and experience that develops cutting edge, precision technology and automated manufacturing equipment that improves productivity while ensuring the highest-quality finished ducts and fittings. JOB DESCRIPTION Quality Tech will conduct routine quality inspections throughout production, including in-process and final inspections of new machinery. ESSENTIAL DUTIES QC inspection of all new equipment. Conduct reviews of checklists for compliance with equipment specification standards per customer purchase agreements. Is a liaison between production and engineering for technical updates. Will participate in overflow part quality check as needed for machining operation. Design and implement methods for process control, process improvement, testing and inspection. Record and maintain documentation of all machinery inspections. Work with the safety committee to ensure continuous compliance with all environmental, health, and safety (EHS) regulations and standards. Identify and troubleshoot quality issues and recommend solutions. Collaborate and train production staff in quality control procedures and standards. Participate in continuous improvement initiatives to enhance quality control processes. Communicate quality control findings and recommendations to management. Support Service as needed with new equipment installations. Performs assumes other duties and responsibilities as may be required.

Job Title: Quality Control Inspector (Electrical Contractor) Employment Type: Full-Time We are seeking a Quality Control Inspector to oversee electrical construction activities on project sites, ensuring all work meets applicable codes, standards, and project specifications. This role plays a key part in promoting quality, safety, and compliance through inspections, documentation, and collaboration with field teams. Key Responsibilities: Inspect electrical installations and verify compliance with NEC, NFPA, IEEE, and project requirements Review drawings, specifications, and quality plans Document inspections, test results, and non-conformance reports (NCRs) Support field teams with quality assurance processes Ensure adherence to safety protocols including LOTO and arc flash Collaborate with project managers, subcontractors, and engineers to maintain high standards Qualifications: Bachelor's degree in a related field (or equivalent experience) Minimum 3 years of construction or field-related experience Proficiency in Microsoft Office and willingness to learn platforms like Procore and Bluebeam OSHA 30 preferred (or willingness to obtain) Strong attention to detail, communication, and organizational skills Work Environment: Primarily based on active construction sites with occasional office visits. Must be available for non-standard hours during key construction phases. What We Offer: Competitive Pay Comprehensive Benefits Package with Tax-Advantaged HSA and FSA offerings Employer-Paid Short- and Long-Term Disability Programs Employer-Paid Life Insurance Generous Paid Time Off Provisions 401K Retirement Savings Plan with Company Match Tuition Reimbursement Fully Paid Parental Leave Voluntary Products Including: Critical Illness Insurance and Accident Insurance Corporate Wellness Program with Wellness Time Off and Rewards Visa sponsorship is not available for this position at this time. The Company does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of the Company without a prior written search agreement will be considered unsolicited and the property of the Company. Please, no phone calls or emails. The Weitz Company, LLC (and its U.S.-based subsidiaries and affiliates) recognizes the value of and is committed to hiring and retaining a diverse and inclusive workforce. We are an Equal Opportunity Employer and follow applicable affirmative action guidelines and policies. All qualified applicants will receive consideration for employment (including minorities, females, veterans, and individuals with disabilities, regardless of sexual orientation, gender identity, or other protected categories in accordance with applicable state and federal laws). The Company is a drug and alcohol-free workplace and background checks are required if applicable. Click here to review our Privacy Notice. Location Cedar Rapids, IA Department Safety & Quality Employment Type Full-Time Minimum Experience Experienced

Quality Control Inspector Company: Loenbro - Industrial Services Group Reports To: Regional Quality Manager Do you want to work for an industry leading, growing, diversified employer who believes in doing what we say, leading by example, doing the right thing, and practicing stewardship? Loenbro is a leader in the industrial services space who strives to be more than just a contractor to our customer, but a business partner who provides superior quality and service. This is your opportunity to work for a great employer who puts employees and their customers first. We have worked hard to build and maintain our reputation and are looking for industrious, conscientious, and motivated individuals to join our team. We encourage you to visit our website at *************** to learn more about our organization and who we are. Position Overview: We are looking for an experienced initiative-taking QC Inspector to join our growing Industrial Construction team. This position will be responsible for the duties listed below along with other related functions. A team-oriented mentality and the drive to continuously improve is what sets the Loenbro team at the top of the industry. This position works closely with related engineering, construction, fabrication, and other departments to ensure that the team's aligned goals are met. Employee will be expected to travel to remote jobs as needed throughout the intermountain region and possibly beyond Job Duties: Weld Map Isometric drawings. Enter welding and inspection information into tracking tools. Assist with pressure testing plans and functions. Review and File NDE/NDT Reports. Work with NDE personnel for planning and execution of work. Assemble and review project documentation packages. Perform and document inspections based on drawings, specifications, and procedures to determine compliance. Perform weld inspections. Review welding requirements and ensure welding procedures comply. Create and implement Project Quality Assurance Plans. Provide support and training to other inspectors. Write inspection and assess plans (I&TP's). Committed to Loenbro's core values and safety policies. Skills/Qualifications: Have a current AWS CWI or ASNT VT II or ability to pass the VT II exam. Knowledge of NDT methods (UT, MT, PT, RT) with ASNT-SNT-TC-1A documented training/hands on hours. Well-rounded with ASTM standards and materials. Efficient in Microsoft Excel and Word. Ability to communicate effectively with co-workers Quality Control Inspector. Excellent interpersonal written and verbal communication skills. Elevated level of organizational skills. Extensive knowledge of reading and understanding drawings. Must be a quick learner and motivated. Ability to travel and relocate as needed. Initiative-taking with the drive to learn and grow. Must be able to work as a team. Essential Requirements: Comply with all company policies and procedures. Ability to work in a challenging environment. Climbing up and down stairs and ladders while working on scaffolds and in trenches to access work. Lifting up to 50 pounds. Walking on uneven terrain for extended periods. Standing for extended periods. The use of respirators if required by projects Quality Control Inspector. Driving if required to travel to and from locations. Occasionally you may need to kneel, reach, or stoop. If driving is required, a valid driver's license and proof of insurability is required. All drivers are subject to a DMV background records search. Benefits Personal Time Off (PTO). Holidays: 6 paid holidays. Health Benefits: All employees are eligible for medical, dental, vision and life insurance coverage. 401(k) Retirement: The Company provides a 100% match of the first 4% of employees' contribution each year, to the plan. Eligibility is immediately following 90 days of employment. We are “Leading the Change” in the Energy Services Industry. Our growth and successes have not changed who we are. We live our core values every day. WE TAKE ACTION WE DO WHAT WE SAY WE LEAD BY EXAMPLE WE DO THE RIGHT THING WE PRACTICE STEWARDSHIP Loenbro is an Equal Opportunity Employer.

Job Description A Quality Inspector in a heavy manufacturing setting. A Quality Inspector is responsible for reviewing products and materials during manufacturing to make sure they meet company requirements. The duties include measuring objects compared to intended physical specifications, running quality tests and identifying defects. Essential Duties and Responsibilities: Determines quality and reliability standards by studying drawings and formulas; verifying specifications with engineering staff. Identifies raw material conditions by collecting samples; conducting inspections and physical test of materials. Identifies in-process product condition by collecting samples during productions process; conducting in-process inspections and physical tests. Determines disposition of finished product by collecting, classifying, analyzing, and interpreting production and quality data; judging product acceptability in comparison to specifications. Determines acceptability of rework by conducting inspections and physical tests of reworked product. Documents finished product status by recording and summarizing raw materials, in-process, and finished-product inspection and physical test data; updating quality assurance data base. Maintains product quality documentation system by writing or rewriting quality assurance procedures. Maintains quality assurance operations by following quality assurance policies and procedures; reporting needed changes. Contributes to team effort by accomplishing relating results as needed. . Education and Experience: High School diploma or equivalent. Expert knowledge of quality expectations and standards. Proven ability to read and interpret blue prints. General understanding of hydraulic, electrical and air systems. General understanding of welding and weld quality. General understanding of paint process and quality.

Transco As a part of the global industrial organization Marmon Holdings-which is backed by Berkshire Hathaway-you'll be doing things that matter, leading at every level, and winning a better way. We're committed to making a positive impact on the world, providing you with diverse learning and working opportunities, and fostering a culture where everyone's empowered to be their best. Who We Are: Transco Railway Products, Inc. has been the leader in providing railcar maintenance and services to the railcar industry. We have earned the reputation for honesty, integrity, and superior quality which has allowed us to establish a committed customer base. Transco is part of Marmon - a strong, growing, global organization that consists of more than 100 autonomous manufacturing and service companies. Job Description: We are looking for a Quality Control Inspector to perform final inspections on railcars to ensure the required work is completed and in compliance with industry standards and customer requirements. The QC Inspector will also support the production team with other quality initiatives as needed. Job Requirements: * Perform inspections of the final product to assess the quality of work performed and compliance to company standards using checklists, reports, forms, procedures, hand tools, gauges, and test instruments. * Work with production to identify and plan for the day's shipments to ensure verifications and inspections are made in a timely manner. * Ability to use railroad gauges, testing techniques, and test equipment necessary for railcar inspections. * Report adverse and/or non-compliant items to the responsible supervisor and QA Manager and follows-up to confirm that remedies have been put in place on items before the car is released to subsequent processes/stages. * Communicate technical information verbally and in writing. * Ability to instruct employees on proper railcar maintenance activities using established procedures and training materials. * Able to perform tasks that require climbing and balancing on ladders and platforms. Verifies cars are properly secured and identified prior to being released. * Able to pass drug screen and physical. What We Offer: * Transco strives to be the Employer of Choice. Our generous benefits package includes: * Benefits on Day 1 * Medical/Dental/Vision with first in class vendors * Health Savings Account * Flexible Spending Account (Medical and Dependent Care) * Company Paid Benefits: Short Term Disability, Long Term Disability, Life Insurance * Employee Assistance Program * 4 weeks of Paid Parental Leave * Vacation Benefits * 401k with generous company match and additional employer annual contribution Don't worry if you think that you do not meet all the qualifications. The tools, technology, and methodologies we use are constantly changing and we value talent and interest over specific experience. It is the policy of Transco to provide equal employment opportunities to all qualified persons, and to recruit, hire, train, promote, and compensate persons in all job without regard to race, color, religion, sex, national origin, disability, or sexual orientation, gender identify, protected veteran status or any other protected characteristic protected by the law. Pay Range: 54,000.00 - 66,000.00 We offer a comprehensive benefits package that may include medical, dental, vision, 401k matching, and more! Following receipt of a conditional offer of employment, candidates will be required to complete additional job-related screening processes as permitted or required by applicable law. We are an equal opportunity employer, and all applicants will be considered for employment without attention to their membership in any protected class. If you require any reasonable accommodation to complete your application or any part of the recruiting process, please email your request to ******************, and please be sure to include the title and the location of the position for which you are applying.

**Discover a more connected career** At TelCom Construction, LLC, as a Quality Control Field Technician, you'll ensure that construction or installation work meets specified standards by performing inspections, conducting tests, and monitoring compliance throughout projects. You'll address issues, document findings, and collaborate with teams to implement improvements and maintain high-quality outcomes **Connecting you to great benefits** + Weekly Paychecks + Paid Time Off, Parental Leave, and Holidays + Insurance (including medical, prescription drug, dental, vision, disability, life insurance) + 401(k) w/ Company Match + Stock Purchase Plan + Education Reimbursement + Legal Insurance + Discounts on gym memberships, pet insurance, and much more! **What you'll do** + Conduct quality inspections during the installation process to ensure work meets plans and specifications + Perform final inspections as requested by customers to ensure compliance with construction standards + Identify issues and report them to relevant team members for resolution + Record and follow up on non-compliance issues until they are resolved + Ensure all required testing is completed as specified and document the results + Follow installation milestones and support project activities as directed by management + Work overtime, travel, and handle on-call or after-hours responsibilities as needed, and perform duties in all weather conditions + Other duties as assigned **What you'll need** + To be 18 years of age or older + Authorization to work in the United States for this company + Valid State driver's license (cannot be Provisional), including an acceptable driving record + One year of relevant work experience Additional qualifications + Quality control experience preferred + Associates Degree in an industry related field or equivalent work experience + Knowledge and understanding of the telecommunication construction industry standard practices + Knowledge of Customer Installation Standards and Documentation **Physical abilities & exposures** + **Routinely** : work alone in remote locations, operate vehicle, squeeze, bend, stoop, stand, walking, climb stairs, use keyboard and mouse + **Occasionally** : work at heights, use ladder, life greater than 55 pounds **Why grow your career with us** Your career here is more than just a job - it's your pathway to opportunity. Our hands-on training, supportive environment, and responsive leadership connect you to work with purpose. Our commitment to you extends beyond professional development to a safety-first culture that ensures you can do what you do best, with peace of mind. **Building stronger solutions together** Our company is an equal-opportunity employer - we are committed to providing a work environment where everyone can thrive, grow, and feel connected. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.