Radio assembler jobs near me - 347 jobs

Job Title: Assembler Duration: 01/26/2026 to 07/26/2026 Pay Rate: $17.00 - $19.00 Shift timing : 2nd Shift 3:30 pm- 1:30 am M_TH Monday-Thursday 5:30AM-3:30PM 2:30PM to 10:30PM Monday-Friday 3rd shift hours 10:30P-6:30A JOB SUMMARY Performs a wide variety of electronic or electro-mechanical assembly operations on assemblies or sub-assemblies. Determines and/or follows methods and sequence of operations in performing wiring, component installation, hand soldering and cable harnessing on assembly units. Makes setups and adjustments holding tolerances to blueprint specifications. Interacts daily with peers and customers (typically internal) to exchange or present factual information. Works on assignments that are routine in nature, requiring limited judgment. Has little or no role in decision-making. Receives predetermined assignments subject to moderate level of control and review. Normally receives detailed instructions on all work. Works under close supervision. Legal authorization to work in the US is required. Will not sponsor individuals for employment visas, now or in the future, for this job opening. Dexian stands at the forefront of Talent + Technology solutions with a presence spanning more than 70 locations worldwide and a team exceeding 10,000 professionals. As one of the largest technology and professional staffing companies and one of the largest minority-owned staffing companies in the United States, Dexian combines over 30 years of industry expertise with cutting-edge technologies to deliver comprehensive global services and support. Dexian connects the right talent and the right technology with the right organizations to deliver trajectory-changing results that help everyone achieve their ambitions and goals. To learn more, please visit ******************** Dexian is an Equal Opportunity Employer that recruits and hires qualified candidates without regard to race, religion, sex, sexual orientation, gender identity, age, national origin, ancestry, citizenship, disability, or veteran status.

Assembly Technicians Needed in Columbus, Ohio A national company with a facility in the Columbus, Ohio area is currently seeking several Assembly Technicians for opportunities with their growing team. The position is a Direct Hire opportunity that offers long-term stable employment, opportunities for growth, and great benefits. Assembly Technicians rates are anticipated to start between $25 to $30 an hour based on each candidate's experience and education. All well-qualified candidates will be considered regardless of pay rate. We offer excellent benefits including great medical, dental, and Vision. Qualified Assembly Technicians will have most, if not all of the following skills and experience: 3+ years of experience with advanced mechanical assemblies, including fitting, alignment, and adjustment of components to close tolerances. Read and interpret blueprints, layouts, proficient with basic math, computer use, follow written instructions and perform with minimal supervision. Skilled with hand/power tools, measuring instruments, and basic fabrication skills preferred. Inspect parts and assist with final preparation for shipping. Prior manufacturing or mechanical assembly experience required; technical/vocational training preferred. Forklift and overhead crane experience. Must be able to work in the United States (No H-1 sponsorship or student visas considered). Must be able to complete standard pre-hire checks including background, drug screen, references, etc.

Currently, we are seeking qualified candidates to join our Production Team as an Assembler on Afternoon Shift, in our Marion, Ohio manufacturing facility. The Marion, Ohio plant is the world's largest manufacturer of clothes dryers. Do you want to share your ideas in an innovative environment? Do you learn quickly in a continuous improvement atmosphere? Does the term lean manufacturing excite you? Do you have a great work ethic? These are full-time positions with no temporary agencies involved. As an associate, you will need to be able to work in a fast paced, high-speed environment, follow standardized work, and adhere to safe work practices in a continuous improvement environment. Whirlpool offers full-time employees an excellent wage and benefits package, including Health/Dental/Vision/Prescription Drug Plan, 401K, Life Insurance, 12 Paid Holidays, Paid Time Off, Tuition Reimbursement, and much more. * The starting wage is $20.25 per hour + shift premium; with time, ability to progress up to $25.70+ per hour * Paid time off (PTO) up to 120 hours in the first year (prorated on start date) * Benefits on day one (medical, dental vision) * Must have ability to work 2nd shift The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions: * Continuously stand or walk (up to 12 hours per day) * ability to reach (over shoulder), twist/turn, push/pull, bend, squat, and lift up to 35lbs frequently * Work on a moving/conveyor style production line or stabilized workstation * Assemble and install parts by hand or using tools/equipment. * Crating and packaging of materials, parts, products etc. Minimum Requirements * 1-years of consistent work history * Must be at least 18 years of age * Possess a high school diploma or GED; * Be subject to and successfully pass a pre-employment drug screen and background check. * Motivated to work as a team player who takes ownership of their work in a safety-minded environment * Must provide a resume Preferred requirements: * 3-months of manufacturing or distribution experience (consecutive) * Associates Degree Whirlpool Corporation (NYSE: WHR) is the number one major appliance manufacturer in the world, with approximately $21 billion in annual sales, 97,000 employees and 70 manufacturing and technology research centers. The company markets Whirlpool, KitchenAid, Maytag, Consul, Brastemp, Amana, Bauknecht, Jenn-Air, Indesit and other major brand names in nearly every country throughout the world. We stay true to our philosophy that says good business begins by not following but leading. Our brands and products help people make the most of time so they can focus on making the most of moments that matter. At Whirlpool Corporation, we believe that all people matter. Celebrating diversity and including thousands of perspectives empower us to create products that blend into every concept of home. Whirlpool Corporation is committed to equal employment opportunities regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status. Additional information about our company can be found at ***************************** Follow us on LinkedIn or join the conversation @ HYPERLINK "********************************** HYPERLINK "********************************** HYPERLINK "*********************************

Working at Freudenberg: We will wow your world! Responsibilities: Test Qualifications: Test The Freudenberg Group is an equal opportunity employer that is committed to diversity and inclusion. Employment opportunities are available to all applicants and associates without regard to race, color, religion, creed, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity or expression, national origin, ancestry, age, mental or physical disability, genetic information, marital status, familial status, sexual orientation, protected military or veteran status, or any other characteristic protected by applicable law. Freudenberg Residential Filtration Technologies Inc.

At STERIS, we help our Customers create a healthier and safer world by providing innovative healthcare and life science product and service solutions around the globe. The MMC Assembler is responsible for maintaining the production of medical case cart products to meet customer requirements. What You'll do as a MMC Assembler Ability to assemble based on knowledge of the functions of major component parts and sub-assemblies within an assigned area. Use and understand torque wrenches and test equipment, and troubleshoot. Maintain published productivity standards on moderately challenging assemblies by utilizing a traveler, blueprint and standard work. Maintain high quality standards (meet the departments published quality rating). Maintain safe work areas and practice safe work habits. Apply 5S tools to include the T-card system. The Experience, Skills and Abilities Needed Required: High School Diploma or GED. 1-2 years of warehousing/manufacturing environment or experience. Preferred: Prior AS400 experience preferred, Experience with hydraulics and electrical component assemblies preferred. Other: Computer Skills to include Microsoft Office, and Shop Floor Control. Knowledge, understanding and application of Lean Manufacturing tools, such as, 5S, Kanban Inventory. Ability to read blueprints, knowledge of schematics. Experience using torque wrenches and test equipment and related troubleshooting. Ability to make decisions and stay quality focused. Ability to understand and follow work instructions, both written and oral. Ability to adapt to conditions as dictated by business requirements. Proven teamwork experience. Ability to work overtime, if required. Knowledge, understanding and application of Lean Manufacturing tools, such as, 5S, Kanban Inventory. What STERIS Offers We value our employees and are committed to providing a comprehensive benefits package that supports your health, well-being, and financial future. Here is just a brief overview of what we offer: Market Competitive Pay Extensive Paid Time Off and (9) added holidays Excellent Healthcare, Dental and Vision Benefits Long/Short Term disability coverage 401(k) with company match Maternity & Paternal Leave Additional add-on benefits/discounts for programs such as Pet Insurance Tuition Reimbursement and continued educations programs Excellent opportunities for advancement and stable long-term career Pay range for this opportunity is $19.11 - $24.73. This position is eligible for bonus participation. Minimum pay rates offered will comply with county/city minimums, if higher than range listed. Pay rates are based on a number of factors, including but not limited to local labor market costs, years of relevant experience, education, professional certifications, foreign language fluency, etc. STERIS offers a comprehensive and competitive benefits portfolio. Click here for a complete list of benefits: STERIS Benefits Open until position is filled. STERIS is an Equal Opportunity Employer. We are committed to equal employment opportunity to ensure that persons are recruited, hired, trained, transferred and promoted in all job groups regardless of race, color, religion, age, disability, national origin, citizenship status, military or veteran status, sex (including pregnancy, childbirth and related medical conditions), sexual orientation, gender identity, genetic information, and any other category protected by federal, state or local law. We are not only committed to this policy by our status as a federal government contractor, but also we are strongly bound by the principle of equal employment opportunity.

Job Description Heroux-Devtek, the world's 3rd largest producer of landing gear, serves the civil and military aerospace markets from production facilities in North America, Europe and United Kingdom. The Company's longevity, flexibility, and track record for the development and implementation of innovative production systems have distinguished it as a leader in the domain. With its most recent acquisitions, Heroux-Devtek is bolstering its status as one of the foremost landing gear, actuation and hydraulic system designers and manufacturers in the global aerospace industry. Information on the division: Located in Strongsville, the 90+ employee facility (100,000 sq. ft.) is one of Héroux-Devtek's centers of excellence for the final assembly of landing gear. As part of the Central Division you will lead P&L responsible for critical machining operations of major commercial aircraft programs such as the Boeing 777 and Embraer E-2, and important military programs as F-18, F-35, C-17 and C-130. With a strong focus on latest technology of the manufacturing processes with machining automation and techniques we aim to remain the best value producer of complex landing gear components. What we offer? Leaders who invest in your success, development, and growth A culture of true teamwork and pride in our product Competitive salaries linked to performance and paid time off 11 paid holidays A comprehensive group insurance plan including a HAS/FSA options, Dental & Vision Supportive wellness program, including healthcare discounts Automatic Life Insurance with supplemental options Short and Long Term Disability Insurance Opportunities for retirement savings with 401k plans including a company match Tuition reimbursement for relevant Certifications, Education, & Trainings Free access to a virtual doctor and the employee assistance program Social activities for all employees (BBQ, Golf, Christmas parties, etc.) Generous referral bonuses and advantageous recognition programs A motivating work environment and a human management style where you can make a difference Summary: The Assembler read drawings and models to complete assembling and disassembling of nose and main landing gear components for the Boeing 777 program and other military programs. Main responsibilities: Perform acceptance test procedures (ATP) on various hydraulic components (shock struts and actuators) Rubber stamp (serialization) to be performed when specified on parts prior to final shipping. Assembling and dissembling nose and main landing gear components for the Boeing 777 program and other military programs Read drawings and models to complete the final assembly for shock struts, actuators and drag struts according to the process plans. Identifying proper and improper fits, alignments, and condition of components Seal bushings and pain sealant on all parts prior to honing Identify opportunities for process improvements and create a process change request. Maintains lot traceability throughout process. 5-S/Housekeeping responsibilities Adheres to all company policies and procedures, including Health & Safety Requirements Other duties as assigned/required by schedule and workload. Our ideal candidate: High school diploma or equivalent AME/A&P license and or aerospace experience is preferred. At least 2 years' experience assembling aerospace components. Work culture and environment: Are you known as an innovation driver? Are you looking for your next challenge and opportunity to learn & excel in Aerospace? Héroux-Devtek offers you the opportunity to work in a diverse and team-oriented environment where skills development is a top priority. Here, employees are at the heart of the realization of the product, developed through engineering centers, factories, a service unit, and an accessible and agile head office for fast decision-making. Be part of a motivating top-notch team taking Aerospace to new heights! Candidates must meet security screening requirements as set out by ITAR directives. HDI Landing Gear is an equal employment opportunity (EEO) employer to all persons regardless of age, color, national origin, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law. In addition, HDI Landing Gear will provide reasonable accommodations for qualified individuals with disabilities.

Immediate openings for Assemblers in the Piqua, OH area! Who We Are 11th Hour Staffing Inc. is a family-owned-and-operated business that is passionate about recruiting, customer service, and our community. We are positioned to be your one-stop staffing resource for all your hiring & employment needs from entry-level to executive, spanning across all industries. Key Responsibilities: Assemble components accurately, thoroughly, and quickly to approved specifications. Read and interpret blueprints, diagrams, and work instructions. Use hand tools, power tools, and equipment to complete assembly tasks. Inspect parts and products for defects, report issues, and perform rework as needed. Follow safety protocols and wear required protective equipment. Maintain a clean and organized work area. Meet production goals and deadlines. Collaborate with team members and supervisors to ensure efficient workflow. Complete and maintain production records and documentation as required. Qualifications: High school diploma or equivalent. Previous experience in manufacturing or assembly is a plus. Ability to use tools and equipment safely and efficiently. Strong attention to detail and quality. Ability to follow verbal and written instructions. Basic math and reading skills. Physical stamina and manual dexterity; ability to lift up to 30 lbs, stand for extended periods, and perform repetitive tasks. Schedule: 2nd: 3:00PM-11:30PM Pay: $15.50/hr Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. 11th Hour Staffing, Inc. is an equal opportunity employer and prohibits discrimination against employees or applicants on the basis of race, color, religion, sex, national origin, age, disability, marital status, veteran status, sexual orientation, genetic information or any other protected characteristic under applicable law protected by federal, state or local law. 11th Hour Staffing, Inc. will make a reasonable accommodation to known physical or mental limitations of a qualified applicant or employee with a disability unless the accommodation would impose an undue hardship to 11th Hour Staffing, Inc. Contact Human Resources with any questions or requests for accommodation.

An Electrical Assembler is responsible for assembling, installing, and maintaining electrical systems and components. They work with various types of wiring, cables, and connectors to ensure proper functioning of electrical equipment and systems. Electrical Assemblers may read and interpret electrical schematics and blueprints, and they often work closely with electricians and other technicians to complete projects. They must adhere to safety regulations and follow industry standards to ensure the integrity and reliability of electrical systems. Supervision: None Essential Responsibilities: Use hand tools (e.g. crimpers, strippers, torquing tools, calibrating tools, etc.) to perform tasks. Run and bundle wires according to Powell wiring standards. Layout, install, drill and tap devices onto doors and back pans. Install name plates and space heaters. Install and terminate CTs. Operate continuity buzzers. Terminate and run wire for MCC, SWGR, and harnesses according to wire diagram. Promote a safety culture as well as attend all safety meetings. Ensure that work areas remain clean and well organized. Perform in process inspections Minimum Qualifications Minimum education level of a High School Diploma or General Education Equivalent Diploma is preferred. Ability to read and understand point-to-point wiring diagrams Ability to read and use a tape measure Must have a basic command of the English language, both written and verbal. Safely use variety of hand/power tools. Lift up to 50lbs using proper lifting techniques. Preferred Qualifications Basic computer knowledge considered and asset. Knowledge of calibration Read and understand spec sheet and master copy drawing. Skills, Abilities & Other Requirements Positive attitude. Willingness to learn. Ability to follow direction from Senior Assemblers and Lead Assemblers. Effectively demonstrates on-time delivery and the ability to stay focused on goals and responsibilities. Self-starter with ability to take on multiple tasks with a drive to succeed. Challenges the status quo; looks for better or more efficient ways to get results. Ability to adapt to new ideas, technology, processes or product changes. Believes and displays through actions that our customers represent our current success and remain vital to our future growth. Demonstrates integrity and ethical decision making. Conscientious, thorough, accurate, and reliable when performing and completing job tasks. Able to work effectively within your team and around other departments and their activities. Ability to learn and adhere to all manufacturing policies and practices to ensure adherence to ISO requirements. Working & Environmental Conditions Working Conditions Safety sensitive position in a temperature-controlled manufacturing or industrial environment with occasional outside activities. Required to wear personal protective equipment (PPE) at all times (i.e., hard hats, safety glasses, hearing protection, safety harnesses as required) and respirators when required. Must be able to work from all type of ladders (step ladders, "A" frame ladders and all size extension ladders) and scaffolding. Working at heights usually no higher than 30 feet in the air on or using proper lift equipment. Physical Requirements Able to maintain body equilibrium and agility to prevent falling when walking, standing, crouching, ascending or descending stairs. Bending the body at the waist, the legs at the knees, and extending arms and hands in any direction in a repetitive manner continuously. Continuous standing, walking 50-300-foot distances for long periods of time with only occasional sitting. Must be able to climb stairs frequently throughout the shift. Able to frequently look over shoulders, work with both arms above shoulders and use both arms at full length frequently. Using upper extremities to apply or exert a force continuously up to 50lbs. Frequent use of hand tools such as tin snips, hammer, and power tools (some vibrating), for long periods of time.

MAC LTT Air + Electric Wiring Pay Rate: $19+ 1st Shift: Mon-Thurs 6am-4:30pm, OT on Fridays Must pass urine drug screen and background check Benefits after 30 days! Employee Benefits: Highly competitive pay rates Health Benefits-Medical, Dental, Vision + Optional Insurances $15,000 company-provided Life Insurance 401k with 50% Match Uniforms Referral Bonuses Employee Assistance Program Paid Holidays Earn-As-You-Go Paid Time Off ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Operate equipment and use safe work habits. Meet or exceed production timelines and goals. Install wiring and hydraulics to units in production. Detect faulty operation of equipment or defective materials and notify supervisors. Examine work pieces for defects and measure work pieces with straightedges or templates to ensure conformance with specifications. Lay out, position, align, and secure parts using straightedges, combination squares, calipers, and rulers. Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout and assembly. Mark or tag material with proper job number, piece marks, and other identifying marks as required. Position and secure work pieces using hoists, cranes, wire, and banding machines or hand tools. Clean or degrease parts using wire brushes, portable grinders, or chemical baths. Repair products by dismantling, straightening, reshaping, and reassembling parts. Other duties as assigned. Able to work overtime and weekends as required to meet production schedules. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE High School Diploma or general equivalency degree (GED) preferred. Strong knowledge of electrical wiring and installation. Strong knowledge of hydraulics and installation. Ability to accurately read and interpret drawings and prints. Ability to accurately use and read micrometers, calipers, tape measures, and precision measuring instruments. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to stand, walk, crawl, and climb for extended periods of time. Ability to lift up to 50 lbs. repeatedly. Ability to work in confined spaces. Ability to work at heights of up to 15 feet. WORK ENVIRONMENT Normal factory environment. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. 100% of time is spent in a factory environment with noise, dust and mechanical operations.

Job Description Electrical Assembler Willoughby, OH, US We are currently searching for Electrical Assemblers to join our team! The Company: Ericson Manufacturing Company engineers and manufactures temporary power, lighting and electrical safety products for commercial/industrial construction, facility maintenance and other industries. Family owned and operated since 1918, our mission is to safeguard jobsites with quality and innovative solutions with a commitment to products made in the USA that provide ease of use and longevity in the field. Available Shift: 6:00 AM - 4:30 PM (M - TH) Other Shift Options include: 4:00 AM - 2:30 PM (M-TH) 5:00 AM - 3:30 PM (M-TH) General Purpose: Performs electro-mechanical production assembly operations to produce components and finished product by performing the following duties: Essential Duties and Responsibilities: Assemble electrical or mechanical systems by installing components, subassemblies, and wiring to NEC standards. Adjust, repair, or replace electrical component parts to correct defects and to ensure conformance to specifications. Performs any assembly-type functions, using hand, power tools, equipment and testing instrumentation. Position, align, or adjust work pieces or electrical parts to facilitate wiring or assembly. Safely operates any equipment needed to perform job within the assembly. Read and interpret schematic drawings, diagrams, blueprints, specifications, work orders, or reports to determine materials requirements or assembly instructions. Explain assembly procedures or techniques to other workers. Drill, tap, punch holes in specified equipment locations to mount components or to provide openings for wiring or instruments. Inspect or test wiring installations and assemblies for product conformance Utilize production job schedules, and confer with supervisors/leads, to determine work priorities. Record production data such labor time and quantities using ERP system. Inform supervisor/lead of equipment malfunctions that need to be addressed. Clean and maintain equipment, machinery, and workstations on a daily basis. Minimum Qualifications, Education and Certifications: High school education or equivalent and two years related assembly experience, including panel wiring and conduit installation. Must be able to read and understand electrical and mechanical blueprints, production/assembly instructions, parts lists, verbal instruction and notes to assemble, wire and install a wide variety of components. Ability to apply previous experience and sound assembly techniques to perform detailed written or oral instructions. Works with limited supervision to assemble units of moderate complexity. Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job: While performing the duties of this job, the employee is regularly required to stand 80% of the time. This job requires full manual dexterity with both hands. Hand strength is important for operating wire strippers, crimpers, wrenches, screwdrivers and pliers. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, peripheral vision, depth perception and the ability to adjust focus. While performing the duties of this job, the employee is required to stand. The employee is required to reach with hands and arms; stoop, talk and hear. Ericson is an equal opportunity employer.

Job Description Assembler - 1st Shift Chardon, OH 7:00 AM - 3:30 PM $16-$18/hour (based on experience) Looking to grow your career in manufacturing? Join a company where advancement is possible and your skills are valued. What You'll Do Assemble components and sub-assemblies based on blueprint specifications Meet productivity standards on moderately complex assemblies Ensure quality and accuracy in every build What We're Looking For Manufacturing background required Ability to read blueprints and follow instructions Previous assembly or machine operating experience Able to stand for full shift and lift 30 lbs. repeatedly for 2-3 hours Strong work ethic and reliability Why Join Us? Stable first shift schedule Growth and advancement opportunities Supportive team environment

Job DescriptionDescription/Comment: Assembles mechanical units, fabricated parts/components and/or electrical/electronic systems to make subassemblies, assemblies or complete units using hand tools, power tools, jigs, fixtures and miscellaneous equipment. Fits, aligns, calibrates and adjusts parts and mechanisms to meet tolerances and product operating requirements; repairing units or products that have failed to meet requirements. This position requires knowledge that is acquired through experience, specialized education or training. The role has clearly defined procedures and tasks as well as defined guidelines to aid in decision making. Technical knowledge required is limited to the tasks performed in own discipline area and is considered basic. The tasks are generally routine and manual. The job is expected to follow detailed and defined rules / instructions and to make simple judgement in straightforward situations. Typically requires selecting between solutions already established. This job typically requires no experience.

TempToFT Assembler Rate: $16/hr Hours: 6am-2:30pm (some overtime until 4:30pm) Wilmington, OH C-D Responsibilities: - Assembly of various products and components to finished goods. - Perform any required setup activity. - Position and align components for assembly. - Assemble fabricated/purchased parts into subassemblies and complete products according to a bill of materials. - Operate air tools and basic hand tools to assist in assembly operations. Additional tool operation may be required as necessary. - Maintain safe and clean working environment by complying with procedures, rules, and regulations. - Perform essential job duties as directed by supervisor. - Other duties may be assigned as necessary. Requirements: - High school diploma or general education degree (GED) is preferred and/or training; or equivalent combination of education and experience. - Must be willing and able to meet quality and production standards set by department. - Must be willing and available to work overtime and Saturdays as scheduled. - Must be willing and available to learn new processes as necessary. - Must be willing and able to work in a team centered work environment. - Comprehend simple instructions, either written or verbal. - Effectively communicate and perform required documentation. - Perform addition, subtraction, multiplication, and division using whole numbers, common fractions, and decimals. - Read basic tape measure and basic blueprints. - Apply common sense understanding to carry out detailed but uninvolved written or oral work instructions. - Deal with problems involving a few concrete variables in various manufacturing situations. If you possess the skills we are looking for and ready to make a positive impact, apply NOW! We look forward to connecting soon!

Responsibilities Assemble product to specifications according to blueprints, drawings, and work orders. Use of power and hand tools required ability to meet production standards Qualifications Able to read and understand work instructions 1-3 months related experience Ability to add, subtract, multiply, and divide in all unites of measure Frequent bending, pushing/pulling, reaching, and lifting periodically up to 70 pounds Regularly lifting up to 35 pounds Education Preferred High School Diploma or GED

Assembler - 1st Shift | North Canton, OH | Full-Time Alliance Industrial Solutions is urgently hiring Assemblers for a growing manufacturing client located near downtown Canton, Ohio. This is a full-time, 1st shift opportunity offering steady hours, weekly pay, and long-term career growth in a fast-paced production environment. Important: This location is not accessible by public transportation. Pay & Benefits Starting pay: $15.00/hour Pay increases and a comprehensive benefits package available after a probationary period Long-term, career-focused opportunity with internal promotions and cross-training Stable, full-time employment with a reputable employer Shift Schedule 1st Shift: Monday-Friday, 7:00 AM - 3:30 PM Mandatory overtime required near the end of each month (flexibility required) Assembler Responsibilities Perform hands-on assembly of components and finished products Read and use a tape measure accurately Identify components and follow assembly steps and processes Perform wiring and cabling during assembly as required Safely operate hand and power tools Conduct basic equipment and safety checks Maintain productivity while working independently or as part of a team Follow all safety, quality, and production standards Assembler Qualifications 3-6 months of manufacturing or assembly experience required Comfortable standing for long periods and performing repetitive tasks Strong attention to detail and manual dexterity Ability to work overtime as needed Good communication skills with supervisors and coworkers Dependable, punctual, and safety-focused Why Apply? Immediate openings Consistent first-shift schedule Growth-oriented company culture Opportunity to build a long-term manufacturing career If you are interested in this full time 1st shift Assembler role in North Canton, OH please apply now!

Our customer has an Electrical Assembler job. Hours: M-F 7:00 - 3:30 Responsibilities/Duties: Read, interpret and follow basic blueprints, diagrams, engineering drawings, specifications, bills of materials, and other written instructions or procedures Perform control panel assembly and point-to-point wiring using measuring tools, hand tools, and power tools Install a variety of electronic components Identify product defects and complete appropriate documentation Rework/repair assembled equipment and products according to engineering specification changes Perform work in accordance with quality standards and established safety procedures Complete tasks as directed by manufacturing schedules with minimum supervision Perform other duties and projects as assigned Maintain work areas and equipment in a clean, orderly, and safe fashion Qualifications/Skills: High School diploma or GED 2+ years of electrical assembly experience 4+ years of experience with electro-mechanical hardware assembly and testing Excellent attention to detail with ability to perform work accurately and thoroughly Effective communication skills and ability to work well in a team environment Basic computer navigation

🕒 Work Hours: 7:00 AM to 3:30 PM or 8:00 AM to 4:30 PM, Monday through Friday 💲 Competitive Compensation Make the Right Connection-Build Your Career with Dixon! Dixon Bayco, a proud division of The Dixon Group is seeking a dedicated and skilled Assembler to join our team in West Chester, OH! The ideal candidate will have hands-on experience in assembling electrical components and systems. This is a great opportunity to be part of a growing company with room for career advancement! About Us: The Dixon Group is a global, family-owned manufacturing company with a history of over 100 years of operation in the U.S.A. Based in Chestertown, Maryland, with distribution centers located worldwide. The company has a diverse workforce and a strong values-based culture. As an innovator in the hose coupling industry, our mission is to provide real solutions for our customers while fostering a supportive and collaborative work environment. At The Dixon Group, we value the contributions of our Military Veterans and proudly employ our nation's heroes. Veterans are strongly encouraged to apply. 🚚 What You'll Do: Assemble electrical components, subassemblies, and finished products according to blueprints, wiring diagrams, and assembly instructions. Test electrical components for functionality and safety compliance. Solder and connect wiring in electronic devices or equipment. Maintain a clean and organized work environment. Follow safety procedures and quality standards during assembly and testing. Document and track assembly progress and report any issues to supervisors 🎯 What We're Looking For: High school diploma or equivalent required. 3-5 years of experience in electrical assembly or similar roles. Proficient with electrical hand tools and machinery (e.g., soldering irons, wire strippers, multimeters). Ability to work independently and as part of a team. Attention to detail and commitment to quality. Excellent problem-solving skills. Strong communication and time management skills. 🌟 What We Offer: Medical, dental, and vision insurance for you and your family Competitive salary Bonus programs 401K retirement plan Training opportunities Tuition reimbursement Paid vacation, PTO, and holidays Gym reimbursements, and more! Join us and be a part of a team that values your contributions and supports your goals! The Dixon Group is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices and laws. Accordingly, to the fullest extent required by applicable law, The Dixon Group strictly prohibits and does not tolerate discrimination against employees, applicants, or any other covered persons. The Dixon Group is committed to protecting the privacy rights of its employees and job applicants to the fullest extent required by applicable law. To that end, personal information will be collected solely for those legitimate business purposes recognized by law, and then maintained in a manner consistent with all applicable laws and regulations pertaining to document retention requirements. The Dixon Group does not sell personal information to third parties, and does not share such personal information with third parties except when authorized by law to do so (e.g., in response to a lawful subpoena; mandatory tax reporting; etc.)

Assembly I - Electrical We build what the future runs on. Accelevation designs, manufactures and installs the physical infrastructure that powers today's most advanced technologies. We've grown over 440% in the last 18 months because we take ownership, solve hard problems, and build with purpose. Join us to build the future. Your Impact As an Assembler, you'll build high-quality electrical components that power our end product. Your hands-on skill, precision, and commitment to safety ensure our products are built correctly, efficiently, and reliably-directly supporting operational excellence and company growth. Essential Duties and Responsibilities Build product in the correct, timely and most cost-effective manner, ensuring alignment with quality necessities and specifications. Perform quality checks on parts. Learn about various types of building materials and technical terms to ensure future growth and knowledge. Follow all job tracking procedures. Follow safety guidelines set forth by the company. Follow all company policies in accordance with Accelevation's Employee Handbook. Participate in Lean Manufacturing/Continuous Improvement initiatives. Become forklift certified if deemed necessary by the manager. Perform all other tasks assigned by the manager. Qualifications Preferred - 2-years experience in a high-speed or manufacturing environment, preferably in an assembly role. High school diploma or equivalent is required. This role requires reading, writing, and understanding work instructions, safety info, and training materials in English. Ability to pull, push, cut, assemble, lift, and move materials weighing 25-50 lbs. Experience using hand tools, small power tools, and basic machinery. Strong communication skills with the ability to follow instructions thoroughly and consistently. Detail-oriented, dependable, and committed to safe work practices and continuous improvement. Benefits Competitive salary Paid time off 401(k) retirement plan with company match Comprehensive health, dental, and vision insurance First time homebuyer program Collaborative, high-energy workplace Our Core Values Safety - We proactively protect our people and environment Inclusion - We respect and appreciate diverse perspectives and backgrounds Speed - We move fast, act decisively, and stay agile Innovation - We challenge assumptions and simplify processes Judgment - We make sound decisions with the business in mind Accountability - We take ownership and deliver results Physical Demands and Work Environment Employees must be able to talk, hear, and frequently sit, with occasional standing, walking, reaching, climbing, balancing, stooping, kneeling, crouching, and crawling. Regular lifting up to 25 lbs and occasional lifting up to 50 lbs is required. Vision requirements include close and color vision and focus adjustment. Work may involve exposure to moving mechanical parts, airborne particles, chemicals, electrical hazards, and explosives. Noise levels can be very loud, requiring ear protection. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. Job Application Notice Accelevation LLC does not ask for payment or sensitive personal details, such as bank account or Social Security numbers, during the job application process. If you're unsure about a job posting, apply directly at **************************** to stay safe. Equal Opportunity Employer Accelevation LLC is an equal opportunity employer. Inclusion is one of our core values - we build teams that celebrate and embrace diversity, fostering a culture of respect for all. As part of our pre-hire process, we may conduct a background check and use E-Verify to confirm employment eligibility.

Butech Bliss is a company that sets itself apart from its competitors by offering the most innovative design, manufacturing and service in our industry. This is accomplished by building and nurturing a workforce of exceptional employees. We recruit top talent by offering an exceptional employment package and fostering a supportive culture and pleasant working environment. The Electrical Assembler will: Interpret and follow blueprints, schematics, and work orders to assemble equipment. Plan, pull, terminate, and label electrical wiring as part of the machine assembly process. Build electrical sub-assemblies such as control panels and operator stations. Install, fit, or adjust electrical components using basic hand tools. Inspect and test assembled products to verify proper function and conformance to specifications. Make repairs or adjustments to correct defects in electrical equipment or assemblies. Perform mechanical assembly functions: clean parts, take measurements, and fabricate/modify components as needed. Complies with all Butech Bliss safety rules. Other duties as assigned by management. Strong candidates for this position will meet the following expectations: Three plus years of experience assembling complex machinery with a focus on electrical wiring, control system components, and panel building. Demonstrated ability to read and work from blueprints and schematics. Basic experience with PLC startup, I/O checkout, and general machine control troubleshooting. Basic mechanical assembly skills including installation of conduit, simple welding, positioning of components, and general understanding of hydraulic/pneumatic component function. Experience with overhead cranes/hoists and comfortable working with large, heavy components. Motivated with the ability to work towards deadlines. Ability to work alone or as part of a small team. Must supply own toolbox with basic hand tools. Willingness to work overtime including Saturdays and occasional field service work. Butech Bliss offers a competitive benefits package which includes medical insurance premium at no cost to the employee, $2,500 deductible and 100% paid once deductible is met, dental and vision insurance, 401K with employer match up to 4%, generous paid vacation, an opportunity for raises every 6 months, and much more. We are an equal opportunity employer and welcome applicants from all backgrounds. Applicants requiring reasonable accommodation for any part of the application process should contact Human Resources at [email protected]