Research and development engineer jobs in Arnold, MO

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Defense, Space & Security (BDS) - Phantom Works organization is seeking a seasoned Low Observables (LO) Design & Integration Engineer to lead design and analysis activities supporting the fabrication and test of an RCS pole model. The successful candidate will apply deep expertise in LO materials, integration, manufacturing, computational electromagnetic (CEM) modelling, and test support to design, build and test a representative pole model for an advanced next generation program in the St. Louis region. Key Responsibilities: Lead detailed LO design and integration for the RCS pole model, including material selection, incorporation of advanced technologies, supplier hardware integration. Use computational electromagnetic solvers to model, analyze, and optimize radar cross section (RCS) and scattering behavior across required frequency bands and aspect angles in support of pre-test predictions and diagnostics. Work with Manufacturing to ensure proper alignment between design, analysis and fabrication of LO components. Define and support fabrication processes, QA checks, and build plans for LO skins, coatings, RAM treatments, and attachments; identify and mitigate manufacturability risks, provide LO liaison support to the shop. Develop and execute test plans for RCS characterization (anechoic chamber and outdoor ranges), including instrumentation, calibration, and measurement repeatability considerations. Prepare and execute data processing workflows to reduce, calibrate, and analyze measured RCS and related EM test data; combine simulation and measurement data for validation and design iteration. Produce clear technical documentation: design descriptions, analysis reports, test plans, test reports, procedures, and presentation materials for program reviews. Mentor junior engineers and support continuous improvement of LO design, test, and data processing practices. Working Conditions and Physical Requirements: Hands-on support in fabrication or test setups may be required. Will require travel to other company locations, supplier facilities, fabrication shops, and test ranges (including anechoic chambers and outdoor ranges). This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. Basic Qualifications (Required Skills and Experience): Bachelor of Science degree in Engineering, Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement 7+ years of professional experience working with low observable materials and technologies, including hands-on exposure to LO integration, design, manufacturing, and test. Demonstrated experience using computational electromagnetic solvers (e.g., FEKO, HFSS, CST, WIPL-D, CARLOS, SENTRI, XPATCH or equivalent) for design and optimization of LO systems and RCS predictions. Strong understanding of electromagnetic principles relevant to scattering, phenomena and Radar Cross Section. Proven track record supporting fabrication and testing of LO components/assemblies and correlating measurements to models. Proficiency in data processing and analysis of RCS/EM test data, including calibration, clutter and background rejection, and data visualization techniques. Excellent technical writing skills with experience producing engineering reports, test plans, and test reports. Effective verbal communication and collaboration skills; ability to lead technical discussions and interface with suppliers, customers, leadership and test facility personnel. Ability to obtain a Top Secret clearance and Special Program Access (US Only Citizenship required) Preferred Qualifications (Desired Skills and Experience): Advanced degree (MS/PhD) in a relevant discipline. Past experience with RCS pole models, and range testing. Experience with material characterization techniques. Knowledge of LO materials and application processes, as well as nondestructive inspection methods for LO components. Familiarity with CAD tools and integration with CEM workflows. Shift: This position is for 1st Shift Drug Free Workplace: Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $118,150 - $159,850 Applications for this position will be accepted until Jan. 06, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active) Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Contingent Upon Program Reward The position is contingent upon program award Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

A well-known company is looking for a Senior Project Engineer or Assistant Project Manager to support ground-up high-rise projects in the multifamily and/or hospitality sectors in the St. Louis market. This role is ideal for a construction professional who thrives in complex projects, enjoys being involved in both field and office operations, and is looking to grow within a strong project team. Key Responsibilities Support project management teams on large-scale, ground-up high-rise projects Assist with schedule tracking, cost controls, and subcontractor coordination Manage RFIs, submittals, change orders, and project documentation Coordinate with architects, engineers, and consultants Participate in project meetings and contribute to project planning and execution Support closeout activities and turnover documentation Qualifications 3+ years of experience as a Project Engineer, Senior Project Engineer, or APM Proven experience on ground-up high-rise projects ($50M+ preferred) Background in multifamily and/or hospitality construction Strong understanding of construction documents and project workflows Ability to work collaboratively with field and office teams Bonus Experience Exposure to historic renovation, adaptive reuse, or preservation projects Experience working on projects with complex structural or design challenges

ACME Constructors Inc. | St. Louis, MO Employment Type: Full-time, In-Office Why Join Our Team? We are a 100% employee-owned (ESOP) company, which means you can build wealth and benefit directly from our shared success. Our culture is built on a foundation of collaboration, accountability, and excellence. We also offer a comprehensive benefits package, including: Competitive Compensation: Starting at $70,000 annually, based on experience Annual performance-based bonus Weekly pay Comprehensive Benefits: 401K with a 4% employer match Medical, Dental, and Vision insurance Employer-paid Life, AD&D, Short-Term, and Long-Term Disability Voluntary Accident Insurance Employee Assistance Program Generous Paid Vacation & Holidays About ACME Constructors Since 1947, we have been a leader in industrial construction, serving Fortune 500 and privately held companies across diverse industries. Our success is built on a commitment to safety and superior project management. With over 700 projects annually and three Missouri locations, we are a team of customer-driven, positive, and hardworking individuals with an entrepreneurial spirit. Our employee-owned structure fosters a deep sense of community and collaboration. About the Role We are looking for a proactive Project Engineer to assist with the planning, coordination, and execution of construction projects. This is a vital, full-time, in-office role that requires working closely with Project Managers and field teams to ensure projects are completed on time, within budget, and to the highest standards of safety and quality. Responsibilities Assist with project planning and scheduling. Review project plans and specifications. Manage technical documentation (submittals, RFIs, change orders). Perform quality control inspections. Support the procurement of materials and equipment. Provide technical support to construction teams. Assist in managing project costs and budgets. Qualifications Experience: Minimum of 2 years of experience in construction engineering or project management is preferred. Knowledge of construction processes and project management practices. Skills: Excellent communication, organizational, and problem-solving skills. Ability to work effectively in a team environment. Detail-oriented and able to manage multiple tasks simultaneously. Technical: Proficiency with Procore, CMIC, Microsoft Project, Bluebeam and the Microsoft Office Suite (Excel, Word, PowerPoint). Education: Bachelor's degree in Civil Engineering, Construction Management, or a related field. Professional Engineering (PE) license or working toward certification is a plus. READY TO APPLY? To apply, take the next step and share your resume with us. All inquiries, resumes and referrals shared are held in strict confidence. For questions and more information, contact ****************************. ACME is an Equal Opportunity Employer. We welcome differences in form of gender, race, ethnicity, disability, geography, socioeconomic status, age, politics, religion, philosophy, sexual orientation, gender identity or expression and veteran status. All applicants who share this goal are encouraged to apply-we look forward to hearing from you!

Formulation R&D Technician- Oral Product Development Humanwell Pharmaceuticals US, St Louis, MO Interested candidate, please submit resumes to email: ******************** Summary Humanwell Pharmaceutical US, Inc., based in St Louis, MO, is committed to advancing pharmaceutical research and development, with a particular emphasis on novel therapeutics that address unmet medical needs. The organization strives to enhance the quality of life for patients and shape a healthier future. Humanwell seeks individuals motivated by a desire to make a meaningful impact and is currently recruiting a dedicated Formulation R&D Technician. The individual will collaborate closely with senior scientists and management to execute hands-on pharmaceutical development activities. Primary Duties and Responsibilities Maintain compliance, cleanliness, and organization within the operational areas of the pilot plant. Set up, operate, maintain, and sanitize a broad array of formulation equipment and testing instruments, including but not limited to scales, high shear and fluid bed granulators, blenders, tablet press, film coater, homogenizer, density tester, and hardness tester. Document laboratory activities in accordance with Good Documentation Practices. Summarize study outcomes and assist in the preparation of technical reports and presentations. Independently plan and accomplish assigned responsibilities within established timelines as directed by supervisory personnel. Conduct physical inventory for both controlled and non-controlled substances. Contribute to the development, revision, and delivery of training on manufacturing Standard Operating Procedures (SOPs). Comply with current Good Manufacturing Practices (cGMP) and all applicable regulatory guidelines. Work extended hours occasionally, as necessitated by project requirements. Be available to travel up to 10% of the time. Perform additional duties and assignments as required. Required Qualifications and Skills: Bachelor's or Master's degree in Pharmaceutical Science, Chemical Engineering, Chemistry, or a closely related discipline. Preferably possesses relevant experience within the pharmaceutical industry. Preferably possesses hands-on experience in pharmaceutical research and development as well as GMP manufacturing environments. Demonstrates willingness and capability to comply with FDA, OSHA, and DEA regulations. Exhibits a proven ability to collaborate effectively as part of a cross-functional team. Displays excellent oral and written communication skills. Job Type: Full-time Job Location: Ballwin, MO

16Consultancy is a dynamic and forward-thinking business consulting company based in Singapore, specializing in gathering and analyzing industry insights. We guide clients towards informed decisions with expertise in sourcing, purchasing trends, and product development across various sectors, primarily focusing on actionable intelligence. Visit us at our website. Job Overview We are seeking skilled Food Industry Consultants specializing in Supply Chain Procurement for a part-time, remote, freelance, or hybrid position with 16Consultancy. This role requires at least 2 year of professional experience. The ideal candidate will have a passion for the food industry, with a particular focus on the freeze-dried fruit sector. Qualifications and Skills Proven experience in supply chain management within the food industry, particularly in the freeze-dried fruit sector. Strong background in global sourcing strategies to efficiently manage and optimize supply chain operations. Comprehensive knowledge and experience in procurement contracts, ensuring favorable terms for the business. Demonstrated ability to identify and select suitable suppliers that match business needs and quality standards. Experience working as a category buyer, focusing on product lines and market trends to enhance procurement strategy. Exceptional analytical skills to assess market trends and identify opportunities for cost-saving in supply chain activities. Strong communication skills to effectively negotiate with suppliers and liaise across different stakeholders internally. Proven capacity to work independently in a flexible, remote, or hybrid setting without compromising productivity. Roles and Responsibilities Analyze and enhance supply chain processes within the food industry, specifically targeting the freeze-dried fruit sector. Identify potential suppliers and establish procurement contracts that align with the strategic goals of the business. Conduct in-depth market research to track purchasing trends and provide insights for product development and sourcing strategies. Ensure compliance with industry standards and regulations related to food supply chain operations and procurement practices. Collaborate with cross-functional teams to support the design and implementation of supply chain improvement initiatives. Maintain and expand professional relationships with suppliers and industry stakeholders to foster long-term partnerships. Deliver actionable recommendations to improve sourcing efficiency while reducing costs and maintaining quality standards. Prepare detailed reports and presentations to convey analysis results and project outcomes to clients and management.

**_What Research and Development Engineering contributes to Cardinal Health_** Engineering is responsible for performing research and analyses to develop design options for components, products, systems and processes. Research and Development Engineering is responsible for developing and implementing new products through adherence to established design control processes and good engineering and documentation practices. **_Job Summary_** The primary purpose of the Senior Engineer, R&D is to lead efforts to design, develop, test and refine new electromechanical medical devices for Cardinal Health. Specifically, this job assists in creation and improvements to devices such as enteral feeding pumps, thermometers and compression devices, among others. A significant amount of time in this job is spent working in computer-aided design packages to develop 3D CAD product models, specifications and drawings. As part of working in a cross-functional technical environment, this job requires coordination with manufacturers, business partners and vendors, worldwide to ensure project success. **_Responsibilities_** + Lead and participate in multi-departmental teams to manage product development projects, adhering to timelines, reporting status, and traveling as needed. + Design, test, and troubleshoot new products for Six Sigma manufacturability, utilizing process simulations (e.g., injection molding) to predict and mitigate failures, and resolving design/production issues through advanced statistical analysis (e.g., ANOVA, Monte Carlo). + Ensure product quality and regulatory compliance by defining specifications, overseeing component manufacturing, conducting product verification/validation, and developing DHF documentation and test protocols compliant with FDA/QSR and European standards. + Facilitate product transfer from R&D to Manufacturing and coordinate effectively with external vendors and personnel on significant cross-functional programs. **_Qualifications_** + Bachelor's degree or equivalent experience in related field preferred + A minimum of 2+ years related work experience desired + Ability to work independently and as a member of a team + Project and Technical Knowledge + Concept Development & Product Design + Up to 20% travel **_What is expected of you and others at this level_** + Applies working knowledge in the application of concepts, principles and technical capabilities to perform varied tasks + Works on projects of moderate scope and complexity + Identifies possible solutions to a variety of technical problems and takes action to resolve + Apply judgment within defined parameters + Receives general guidance and may receive more detailed instruction on new projects + Work reviewed for sound reasoning and accuracy **Anticipated salary range** : $80,500 - $87,500 **Bonus eligible** : No **Benefits** : Cardinal Health offers a wide variety of benefits and programs to support health and well-being. + Medical, dental and vision coverage + Paid time off plan + Health savings account (HSA) + 401k savings plan + Access to wages before pay day with my FlexPay + Flexible spending accounts (FSAs) + Short- and long-term disability coverage + Work-Life resources + Paid parental leave + Healthy lifestyle programs Application window anticipated to close: 12/26/2025 *if interested in opportunity, please submit application as soon as possible. The salary range listed is an estimate. Pay at Cardinal Health is determined by multiple factors including, but not limited to, a candidate's geographical location, relevant education, experience and skills and an evaluation of internal pay equity. \#LI-MP1 \#LI-hybrid _Candidates who are back-to-work, people with disabilities, without a college degree, and Veterans are encouraged to apply._ _Cardinal Health supports an inclusive workplace that values diversity of thought, experience and background. We celebrate the power of our differences to create better solutions for our customers by ensuring employees can be their authentic selves each day. Cardinal Health is an Equal_ _Opportunity/Affirmative_ _Action employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ancestry, age, physical or mental disability, sex, sexual orientation, gender identity/expression, pregnancy, veteran status, marital status, creed, status with regard to public assistance, genetic status or any other status protected by federal, state or local law._ _To read and review this privacy notice click_ here (***************************************************************************************************************************

Apple is seeking a highly skilled and experienced individual to join their team, which is dedicated to integrating the latest machine learning techniques into software development. The role involves developing innovative machine learning tools and frameworks to transform the way software development is done at Apple and beyond. Candidates should have a deep understanding of state -of -the -art deep neural network (DNN) acceleration architectures and their performance tradeoffs. They should also possess strong programming skills using ML tools such as Python, PyTorch, Tensorflow, CUDA, Metal, and C/C++. The role requires at least 10 years of tech lead software engineering/ML experience, strong leadership skills, and the ability to guide technical leads, establish core execution teams, and define technical roadmaps. The position aims to accelerate OS and app development while ensuring user privacy, performance, and power efficiency. The candidate will play a pivotal role in shaping the future of software development at Apple and will have the opportunity to work with a dynamic team of scientists and engineers. This is a home -office -based role.

About Watlow Watlow is a global technology and manufacturing leader who provides world class engineering expertise through innovative thermal products and systems, enabling our customers to thrive.Guided by our values: Do what is right, Always learning and improving, Respect everyone, and Lead with service and humility - we empower our people to turn ideas into real impact. Joining Watlow means becoming part of a team that embraces challenges, grows together, and shapes the future of technology, while making a real difference in the world. Description Watlow's St. Louis location serves as our global headquarters and a hub for innovation, engineering, and advanced manufacturing. Here, we design and develop cutting-edge thermal solutions that power critical applications across industries such as semiconductor, energy, and medical technology. We are hiring a: Product Development Co-op St. Louis, MO-Onsite About the role As a Product Development Co-op at Watlow, you will gain hands-on experience in designing and executing tests that shape the future of our products. Your work will directly impact innovation and quality, contributing to the success of our teams and customers worldwide.We are looking for a problem solver and continuous improver who thrives in a collaborative, fast-paced environment. You have a strong engineering mindset, a passion for quality, and the desire to make a tangible impact. If you're ready to take ownership and drive meaningful change, this role is for you. What You'll Do: Hands-on experience working in an electric heater test lab or machine shop alongside experienced engineers and technicians Assist in gathering test requirements and writing test procedures and plans Design and assemble test fixtures, wiring, and programming controllers Execute and monitor tests, perform failure and root cause analysis Write detailed test reports What you'll need to succeed? Pursuing an engineering bachelor's degree from an accredited university Preferred: Electrical or Mechanical Engineering Experience writing test plans and procedures Coursework in electrical circuits and heat transfer preferred Solid modeling experience (SolidWorks preferred) Aptitude for using tools; LabVIEW experience is a plus Why Join Watlow's team: The health, well-being and financial stability of you and your family is a high priority to us. The Watlow Total Rewards Plan includes competitive compensation and a full range of life and career enhancing benefits.Work model: OnsiteLearning and growth opportunities: Work with cross-functional teams and gain hands-on experience in a state-of-the-art testing facility. Diversity & Inclusion We proactively embrace diversity in all its dimensions across our company and cultivate a culture of inclusion and forward thinking that respects and reflects each team member's individual strengths, views, and experiences. Watlow takes pride in being an inclusive equal opportunity employer and considers for employment qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Job Description McBride Homes is Missouri's largest home builder, dedicated to creating quality homes and vibrant communities. We pride ourselves on innovation, sustainability, and exceptional customer service. Each year, McBride is responsible for developing over 1,000 homesites, and we're looking for talented individuals to join our dynamic team and contribute to shaping the future of homebuilding in Missouri. This is an in-office position located in our state-of-the-art facility in Chesterfield Valley. Top Reasons to Work with Us: Competitive salary and discretionary bonus opportunity. Comprehensive benefits package, including health, dental, vision, life, and 401(k) plan with matching contribution. State-of-the-art software and technology Opportunities for professional development and career advancement. A collaborative work environment that values innovation and teamwork. Hands-on experience and growth alongside industry experts. Salary: $60,000 - $80,000 annually, depending on experience. Position Overview: We are seeking an Entry-level Civil Engineer to assist in the planning and execution of residential land development projects. This role is ideal for Civil Engineers with 0-2 years of residential land development experience who are interested in working with a dynamic team on exciting projects and alongside skilled consultants. The successful candidate will play a key role in delivering high-quality, cost-effective communities by collaborating with internal teams and external partners from concept through construction. Key Responsibilities: Evaluate site plans and roadway and utility construction drawings for municipal code compliance, constructability, and value-engineering opportunities. Design preliminary residential layouts, grading plans, and utility plans for project feasibility studies Review and interpret technical reports, including geotechnical, traffic, and environmental studies. Perform site assessments to verify existing conditions and proactively identify potential concerns or constraints. Attend planning and zoning meetings to represent development interests and facilitate project approvals. Maintain organized records of permits, plan approvals, due diligence materials, and ongoing project correspondence. Review surveys and title documents to identify property constraints and mitigate project risks. Collaborate with external engineering consultants to ensure accuracy of plans, alignment with project goals, and timely submittals. Work closely with internal team members to meet project milestones, stay within budget, and uphold quality standards. Demonstrate a proactive, problem-solving mindset and a strong eagerness to learn and grow within the role. Qualifications: Bachelor's degree in Civil Engineering or Construction Management. 0-2 years of experience in land development or a related field Proficiency in AutoCAD Civil 3D and Microsoft Office Suite Strong time management, organizational, and communication skills. Join us at McBride Homes where you'll build more than homes-you'll build a future! McBride Homes is an equal opportunity employer and encourages applications from all qualified individuals.

Company: The Boeing Company The Boeing Defense, Space & Security (BDS) Phantom Works team is seeking an Experienced or Senior Composites Fabrication Manufacturing Engineer located in Hazelwood, MO. Who We Are: At Boeing St. Louis, we are leaders in aerospace innovation, dedicated to shaping the future of flight. Position Responsibilities Develops and implements production and tooling methodologies. Participates on Integrated Product Teams (IPTs) to integrate technical solutions across multiple disciplines. Develops, identifies and implements conceptual designs and maintains the program architecture for build. Leads and implements manufacturing plans. Conducts producibility and variation analyses to ensure that manufacturing process capability matches requirements. Assists in providing producibility information for inclusion in project plans and helps document producibility best practices. Analyzes design/build concepts to evaluate producible design/build definitions. Resolves technical problems of significant impact to performance, cost or schedule. Coordinates and implements new engineering principles, theories, advanced technologies and concepts. Validates and ensures production readiness of solutions to complex problems. Implements lean principles and technologies. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship as a condition of employment. An interim and/or final U.S. Secret Clearance Post-Start is required. This position requires the ability to obtain program access, for which the U.S. Government requires U.S. Citizenship only. Basic Qualifications (Required Skills and Experience): Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science. 5+ years of related work experience with a Bachelors OR an equivalent combination of technical education and experience. Preferred Qualifications (Desired Skills and Experience): Level 4: 9+ years of related work experience with a Bachelors OR an equivalent combination of technical education and experience. Experience in composite aerospace manufacturing and associated tooling, inspection and testing methodologies with emphasis on large scale prototyping applications Experience with Model Based Engineering tools Experience with creation of manufacturing planning and authoring assembly work instructions Experience with aerospace new product development and prototyping Experience with NX/Unigraphics CAD and Teamcenter PDM systems for design interrogation, manufacturing planning development and tooling design review Experience implementing lean manufacturing principles in a production system Experience in planning and developing product quality by applying APQP and PFMEA Experience leading and collaborating within a multi-disciplinary engineering environment Ability to collaborate with both the engineering work force and the mechanics on the factory floor Engineering design or manufacturing engineering experience Shift: This position is for 1st Shift Relocation: This position offers relocation based on candidate eligibility. Drug Free Workplace: Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features: Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: Level 3 (Experienced): $98,600 - $133,400 Level 4 (Senior): $120,700 - $163,300 Language Requirements: Not Applicable Education: Bachelor's Degree or Equivalent Relocation: This position offers relocation based on candidate eligibility. Export Control Requirement: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Safety Sensitive: This is not a Safety Sensitive Position. Security Clearance: This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. This position requires ability to obtain program access, for which the U.S. Government requires U.S. Citizenship only. Visa Sponsorship: Employer will not sponsor applicants for employment visa status. Contingent Upon Award Program This position is not contingent upon program award Shift: Shift 1 (United States of America) Stay safe from recruitment fraud! The only way to apply for a position at Boeing is via our Careers website. Learn how to protect yourself from recruitment fraud - Recruitment Fraud Warning Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. EEO is the law Boeing EEO Policy Request an Accommodation Applicant Privacy Boeing Participates in E - Verify E-Verify (English) E-Verify (Spanish) Right to Work Statement Right to Work (English) Right to Work (Spanish)

Join the 125-year legacy of Potter Electric Signal Company! Potter has been a part of the St. Louis community since 1898 and we are very proud of our rich history in the fire and life safety industry. Potter's mission is to be the "Symbol of Protection" for fire and life safety solutions worldwide by combining the latest technology in fire protection with the dedicated manpower for which we have been known for over one hundred years. Our vision is to provide industry leading quality solutions, products and services for the protection of life, property and the environment. With unwavering dedication to our customers, Potter looks to continue as the industry standard in both product and service with increased focus on international expansion. Each employee at Potter takes great pride in knowing that every product we assemble, service, and sell is for the purpose of saving lives around the world. We strive to provide employment opportunities to those individuals who are performance driven, team players, take pride in their work, and are enthusiastic and passionate about their job. Potter Global Technologies and our private equity firm, KKR, value our employees and all that they do. KKR offers a unique benefit and opportunity for all employees to participate in an ownership program of Potter Global Technologies. Being a co-owner allows each employee to play a more direct role in the business itself and reap the financial benefits of the Company's success. The Manufacturing Engineer is responsible for designing, implementing, and improving manufacturing processes and systems to enhance efficiency, quality, and productivity. This position will play a crucial role in streamlining operations, reducing costs, and maintaining high product quality throughout the manufacturing process. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Provide technical support and problem-solving skills for the Manufacturing department to meet quality and quantity objectives. Review ECO's and implement new work instructions, tooling, and any training that might be needed for plant assembly. Investigate production problems to determine causes and to recommend corrective actions. Write work instructions for new manufacturing processes. Train supervisors and operators in accordance with work instructions. Initiate continuous improvement activities. Provide technical support for Maintenance personnel. Acting liaison between Manufacturing, Maintenance, QC, R&D, and Purchasing departments. Design Jigs and fixtures to aid in assembly processes. Perform other duties as assigned. Required Skills/Abilities Ability to act with integrity, professionalism, and confidentiality. Excellent verbal and written communication skills. Excellent time management skills with a proven ability to meet deadlines. Strong analytical and problem-solving skills. Ability to prioritize tasks and to delegate them when appropriate. Proficient with Microsoft Office products and Solid Works Required Qualifications Bachelor's Degree in Mechanical Engineering or similar. Minimum of 2 years of applicable experience. Willingness to be hands-on within the manufacturing floor. Preferred Qualifications Experience in a medium volume manufacturing environment. Machine and fixture design experience. PLC Software (GE Proficiency Machine Edition) experience. This is a full-time position, on-site at the manufacturing facility. The hours of work are Monday through Friday, 40 hours per week. An occasional shift in hours may be necessary to accommodate business needs. Work Environment/Physical Demands/Travel This job operates in a professional business office or home office where standard office equipment is routinely used, such as computers, photocopy machines, fax machines, telephones and filing cabinets. In addition, this job also operates in a warehouse/manufacturing setting where various tools and equipment are used. This role must be able to stand, bend, stoop, kneel and exhibit good visual acuity to perform daily tasks. This position must be able to lift 50 pounds at times. Must be able to access and navigate each department at the organization's facilities. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of an employee for this job. Activities, duties and responsibilities may change at any time with or without notice.

The Manufacturing Engineer will lead the transition of new products from Development into sustained Manufacturing and support products through the lifecycle. Apply Engineering principles to analyze, develop and implement Engineering Change Orders and/or Deviations to document all changes to production process, tools or parts in accordance with GMP and ISO quality requirements. ESSENTIAL FUNCTIONS: (Responsibilities that are central to the job and MUST be performed either unaided, or with the assistance of a reasonable accommodation, ref. ADA.) Development of new manufacturing technology to increase production capacity, enable future product technology introduction and decrease cost of production maintaining high quality and environmental protection and work safety standards. Identify improvement potentials for production processes (capacity analysis, lead time analysis) and cost of production (labor efficiency, material yield rate, other costs). Develop new technology in a structured approach based on business case analysis. Integrate best practices regarding safety and ergonomics in production workstations. Work on problems of moderate scope where analysis of product, process, and/or data requires an identification and gathering of relevant factors Performance improvement of installed manufacturing technology at the Chesterfield Site applying continuous improvement, lean, 6 sigma or other methods. Improve Overall Equipment Efficiency of existing manufacturing equipment by means of a structured approach (reduce gap between real output and theoretical output), jointly with production Optimize capacity of existing manufacturing equipment (increase theoretical output). Continuously track production capacity. Design and construct or specify and purchase electrical, mechanical and/or software tools and fixtures for performing various tasks in a safe, efficient, repeatable and cost-effective manner. Perform tooling qualification. Continuously and proactively seek cost reduction opportunities without compromising quality or on-time delivery Responsible for leading troubleshooting efforts/technical teams to perform root cause analysis and subsequent solution development of process, vendor or design related problems associated with supporting a product Analyze the disposition of non-conforming parts Track all problem parts for a product and develop and report action plan Estimate manufacturing costs and determine time standards Work cross functionally to support the development of new products that are manufacturable Note: Essential functions may not be limited to the tasks and responsibilities listed within this section. Ordering of essential functions does not necessarily reflect importance of item. ADDITIONAL RESPONSIBILITIES: (Non-essential duties or marginal job functions that support essential functions) WORKING RELATIONSHIPS: (From whom work is received and given, internal and external customers, supervisors, subordinates, teams, etc.) Coordination of project activities with Program Management, Quality, Contract Manufacturer, Purchasing, Service, Marketing, Hardware Engineering, Software Engineering, Contribute to the global ZEISS team through coordination and implementation of improvement projects with sister sites. Promote knowledge transfer and coordination for implementation of improvement projects from ZEISS global locations to local site and vice versa. FINANCIAL IMPACT: (Optional) Comprehensive analysis prior to decision-making is crucial. Erroneous decisions will have a serious impact on the overall success of company operations and may jeopardize business activities. Decisions made concerning process improvements, tooling requirements and component disposition and the timeliness of new product introductions will impact the business. WORKING ENVIRONMENT: (Physical surroundings) Manufacturing consisting of instrument assembly, calibration and testing that complies with the FDA's Good Manufacturing Practices (GMP). REQUIREMENTS: (Bona Fide Occupational Requirements, such as education, certification, and/ or skills that are necessary to do the job.) BS degree in engineering discipline or related field 3+ years equivalent experience in design or manufacturing engineering OR MS degree in engineering discipline or related field. Experience with medical device manufacturing and optics assembly desirable Familiar with DFT, GMP, and ISO 9001 Proficient with MS Word, Excel, Powerpoint Proficiency with Mentor Graphics a plus Proficiency with Solidworks desirable SPECIAL DEMANDS: (If any, describes physically uncomfortable conditions, travel requirements, heavy lifting, etc., ref. ADA) May be required to travel internationally. This job description does not state nor imply that the above are the only duties and responsibilities assigned to this position. Employees holding this position will be required to perform any other job related duties as requested by management and will also be required to meet safety-related requirements. All requirements are subject to possible modification to reasonably accommodate individuals with a disability. Your ZEISS Recruiting Team: Clara Cresswell Zeiss provides Equal Employment Opportunity without unlawful regard to an Applicants race, color, religion, creed, sex, gender, marital status, age, national origin or ancestry, physical or mental disability, medical condition, military or veteran status, citizen status, sexual orientation, pregnancy (includes childbirth, breastfeeding or related medical condition), genetic predisposition, carrier status, gender expression or identity, including transgender identity, or any other class or characteristic protected by federal, state, or local law of the employee (or the people with whom the employee associates, including relatives and friends).

Primary Responsibility: The Manufacturing Engineer is responsible for designing and optimizing physical production cells and workflows, including production cell layout, product flow, early-stage Design for Manufacturability (DFM), and the supporting processes and control documents required to maintain a safe, repeatable, and high-quality manufacturing environment. In addition, the Manufacturing Engineer may support product value streams across all facilities through plant layout development, process flow optimization, and project engineering activities. This role is also called upon to troubleshoot complex or persistent product and process flow issues across the organization. Duties & Responsibilities: Evaluate current product and manufacturing process flows to identify hidden factories and eliminate inefficiencies, driving improvements in safety, productivity, and throughput. Develop new manufacturing processes or enhance existing ones to improve safety, efficiency, environmental performance, and compliance with internal and external standards. Review early product designs and perform feasibility studies to validate manufacturability, identify risks, and ensure proposed designs can be effectively executed in production. Assess machinery, fixtures, tooling, and equipment to ensure suitability for intended manufacturing operations and recommend upgrades or replacements as necessary. Evaluate manufacturing cells and value streams, conducting beta testing of new equipment, technologies, or processes to confirm performance under real-world conditions. Serve as the primary liaison between product design and manufacturing for new product introduction (NPI), ensuring seamless handoff, clear communication, and timely project execution. Conduct research on new materials, technologies, and methods that may enhance manufacturing capabilities, reduce cost, or improve product performance. Candidate Requirements: Continuous improvement and zero-defect mindset, with a strong commitment to driving quality, efficiency, and operational excellence. Strong understanding of metallic manufacturing techniques and treatment processes, including milling, turning, grinding, and heat treatment. Excellent communication and interpersonal skills-both verbal and written-with the ability to interface effectively with customers, suppliers, and cross-functional teams across Safety, Production, Quality, and Design. High attention to detail with the ability to recognize the broader operational landscape, successfully managing multiple projects in a fast-paced manufacturing environment. Demonstrated knowledge and practical application of core engineering principles, with strong familiarity in Product Lifecycle Management (PLM) and Lean Production methodologies. Advanced analytical capabilities to evaluate processes, solve complex problems, and implement sustainable process improvements. Strong ability to conduct Process Capability studies and translate findings into actionable improvement plans. Proficient in Microsoft Office Suite and CAD/CAM tools, including SolidWorks and AutoCAD (preferred). Skilled in engineering documentation and technical standards, including Standard Work, Work Instructions, GD&T, PLM/PDM systems, and configuration management. Demonstrated leadership qualities, with a high level of motivation and the ability to work independently with minimal supervision. Willingness and ability to travel as required (0-25%). Supports additional activities and initiatives assigned by the Engineering Director. Must be presently authorized to work in the U.S. without a requirement for work authorization sponsorship by our company for this position now or in the future Must reside in the United States Bachelor's degree in relevant engineering discipline required. (ABET standard) 1-3 years of related engineering experience preferred. Work in conditions typical of a manufacturing environment - noise, dust, odors, etc. Able to consistently wear all required personal protective equipment (PPE), including safety shoes, safety glasses, hearing protection, and other items as required by the task or work area. Ability to lift up to 35 pounds. Ability to stand, sit, and walk for extended periods of time. #IND Maxcess is an equal employment opportunity employer. We do not discriminate on the basis of race, religion, sex, disability, age, pregnancy, national origin, sexual orientation, or any other characteristic protected by applicable law. We are committed to diversity and inclusion, and all qualified candidates are encouraged to apply.

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Defense Space & Security has an exciting opportunity for a Radar Target Generator Design Engineer for Flight Simulation Labs, located in Berkeley, MO. The Flight Simulation Labs organization has expertise supporting marketing, design, development, integration, test and training objectives for Boeing military aircraft such as T-7, F-15, F-18, and MQ-25. As a Radar Test Station Design Engineer, you will be a part of a team of engineers who develops, upgrades, maintains integration test sites and their subcomponents for use in avionics systems integration laboratories (SILs). You will utilize engineering processes, methodologies, and tools to create and refine hardware designs, specifications, and architectures for various radar test stations and systems, ensuring alignment with program requirements and objectives Position Responsibilities: Analyze customer and system requirements to develop basic architectural approaches and detailed specifications needed in various SIL test sites / common products for new systems as well as upgrades to existing equipment located in STL as well as at remote locations Develop high-level and detailed designs consistent with these requirements and specifications Develop and maintain Radar test station hardware Validate designs through various methods of analysis, peer review, standalone testing Identify, track and status technical performance measures to gauge progress / ensure requirement compliance Support supplier management with make/buy recommendations and other technical services such as fabrication Integrate designs into existing SILs infrastructure Provide engineering support to stakeholders throughout the lifecycle of these and existing SIL products Investigate emerging technologies to develop concepts for future product designs to meet projected requirements Significant internal and external customer interaction Maintain configuration management of test station hardware and software Basic Qualifications (Required Skills and Experience): Bachelor of Science degree in Engineering, Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement Maintain configuration management of test station hardware and software 5+ Years of experience in engineering 3+ Years of experience in modern radar systems Comprehensive understanding of circuit design, working with schematics, databases, PCs Knowledgeable in RF and Microwave design Familiar with Digital Radio Frequency Memory (DRFM) Aware of Real Time systems constraints Radar Integration experience Understanding of field-programmable gate array (FPGA) Preferred Qualifications (Desired Skills and Experience): Experience with hardware/software integration and testing Experience in working with and developing embedded hardware/software architectures Experience with internal Radar operation Experience with Radar testing Experience with VPX racks and embedded PCs Experience in Agile Methodologies and tools This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. Shift: This position is for 1st Shift Drug Free Workplace: Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features: Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range Level 3: 107,100-144,900 Summary pay range Level 4: 129,200-174,800 Applications for this position will be accepted until Jan. 05, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim U.S. Secret Clearance Pre-Start and final U.S. Secret Clearance Post-Start is required. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

What Research and Development Engineering contributes to Cardinal Health Engineering is responsible for performing research and analyses to develop design options for components, products, systems and processes. Research and Development Engineering is responsible for developing and implementing new products through adherence to established design control processes and good engineering and documentation practices. Job Summary The primary purpose of the Senior Engineer, R&D is to lead efforts to design, develop, test and refine new electromechanical medical devices for Cardinal Health. Specifically, this job assists in creation and improvements to devices such as enteral feeding pumps, thermometers and compression devices, among others. A significant amount of time in this job is spent working in computer-aided design packages to develop 3D CAD product models, specifications and drawings. As part of working in a cross-functional technical environment, this job requires coordination with manufacturers, business partners and vendors, worldwide to ensure project success. Responsibilities Lead and participate in multi-departmental teams to manage product development projects, adhering to timelines, reporting status, and traveling as needed. Design, test, and troubleshoot new products for Six Sigma manufacturability, utilizing process simulations (e.g., injection molding) to predict and mitigate failures, and resolving design/production issues through advanced statistical analysis (e.g., ANOVA, Monte Carlo). Ensure product quality and regulatory compliance by defining specifications, overseeing component manufacturing, conducting product verification/validation, and developing DHF documentation and test protocols compliant with FDA/QSR and European standards. Facilitate product transfer from R&D to Manufacturing and coordinate effectively with external vendors and personnel on significant cross-functional programs. Qualifications Bachelor's degree or equivalent experience in related field preferred A minimum of 2+ years related work experience desired Ability to work independently and as a member of a team Project and Technical Knowledge Concept Development & Product Design Up to 20% travel What is expected of you and others at this level Applies working knowledge in the application of concepts, principles and technical capabilities to perform varied tasks Works on projects of moderate scope and complexity Identifies possible solutions to a variety of technical problems and takes action to resolve Apply judgment within defined parameters Receives general guidance and may receive more detailed instruction on new projects Work reviewed for sound reasoning and accuracy Anticipated salary range: $80,500 - $87,500 Bonus eligible: No Benefits: Cardinal Health offers a wide variety of benefits and programs to support health and well-being. Medical, dental and vision coverage Paid time off plan Health savings account (HSA) 401k savings plan Access to wages before pay day with my FlexPay Flexible spending accounts (FSAs) Short- and long-term disability coverage Work-Life resources Paid parental leave Healthy lifestyle programs Application window anticipated to close: 12/26/2025 *if interested in opportunity, please submit application as soon as possible. The salary range listed is an estimate. Pay at Cardinal Health is determined by multiple factors including, but not limited to, a candidate's geographical location, relevant education, experience and skills and an evaluation of internal pay equity. #LI-MP1 #LI-hybrid Candidates who are back-to-work, people with disabilities, without a college degree, and Veterans are encouraged to apply. Cardinal Health supports an inclusive workplace that values diversity of thought, experience and background. We celebrate the power of our differences to create better solutions for our customers by ensuring employees can be their authentic selves each day. Cardinal Health is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ancestry, age, physical or mental disability, sex, sexual orientation, gender identity/expression, pregnancy, veteran status, marital status, creed, status with regard to public assistance, genetic status or any other status protected by federal, state or local law. To read and review this privacy notice click here

Join the 125-year legacy of Potter Electric Signal Company! Potter has been a part of the St. Louis community since 1898 and we are very proud of our rich history in the fire and life safety industry. Potter's mission is to be the "Symbol of Protection" for fire and life safety solutions worldwide by combining the latest technology in fire protection with the dedicated manpower for which we have been known for over one hundred years. Our vision is to provide industry leading quality solutions, products and services for the protection of life, property and the environment. With unwavering dedication to our customers, Potter looks to continue as the industry standard in both product and service with increased focus on international expansion. Each employee at Potter takes great pride in knowing that every product we assemble, service, and sell is for the purpose of saving lives around the world. We strive to provide employment opportunities to those individuals who are performance driven, team players, take pride in their work, and are enthusiastic and passionate about their job. Potter Global Technologies and our private equity firm, KKR, value our employees and all that they do. KKR offers a unique benefit and opportunity for all employees to participate in an ownership program of Potter Global Technologies. Being a co-owner allows each employee to play a more direct role in the business itself and reap the financial benefits of the Company's success. The Manufacturing Engineer is responsible for designing, implementing, and improving manufacturing processes and systems to enhance efficiency, quality, and productivity. This position will play a crucial role in streamlining operations, reducing costs, and maintaining high product quality throughout the manufacturing process. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Provide technical support and problem-solving skills for the Manufacturing department to meet quality and quantity objectives. * Review ECO's and implement new work instructions, tooling, and any training that might be needed for plant assembly. * Investigate production problems to determine causes and to recommend corrective actions. * Write work instructions for new manufacturing processes. * Train supervisors and operators in accordance with work instructions. * Initiate continuous improvement activities. * Provide technical support for Maintenance personnel. * Acting liaison between Manufacturing, Maintenance, QC, R&D, and Purchasing departments. * Design Jigs and fixtures to aid in assembly processes. * Perform other duties as assigned. Required Skills/Abilities * Ability to act with integrity, professionalism, and confidentiality. * Excellent verbal and written communication skills. * Excellent time management skills with a proven ability to meet deadlines. * Strong analytical and problem-solving skills. * Ability to prioritize tasks and to delegate them when appropriate. * Proficient with Microsoft Office products and Solid Works Required Qualifications * Bachelor's Degree in Mechanical Engineering or similar. * Minimum of 2 years of applicable experience. * Willingness to be hands-on within the manufacturing floor. Preferred Qualifications * Experience in a medium volume manufacturing environment. * Machine and fixture design experience. * PLC Software (GE Proficiency Machine Edition) experience. This is a full-time position, on-site at the manufacturing facility. The hours of work are Monday through Friday, 40 hours per week. An occasional shift in hours may be necessary to accommodate business needs. Work Environment/Physical Demands/Travel This job operates in a professional business office or home office where standard office equipment is routinely used, such as computers, photocopy machines, fax machines, telephones and filing cabinets. In addition, this job also operates in a warehouse/manufacturing setting where various tools and equipment are used. This role must be able to stand, bend, stoop, kneel and exhibit good visual acuity to perform daily tasks. This position must be able to lift 50 pounds at times. Must be able to access and navigate each department at the organization's facilities. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of an employee for this job. Activities, duties and responsibilities may change at any time with or without notice.

Working at Watlow Watlow is a global technology and manufacturing leader who provides world class engineering expertise through innovative thermal products and systems, enabling our customers to thrive. We are making a positive impact every day as our solutions enrich the lives of people everywhere. We have been providing breakthrough thermal solutions for nearly a century. Our corporate values guide us uncompromisingly to always do the right thing, continually learn and improve, respect everyone, and lead with service and humility. * The Co-op positions at Watlow offer a 6-8-month immersive experience for students seeking more than a typical internship. This program allows participants to step away from their academic studies and engage in real-world engineering challenges directly tied to the company's strategic objectives. * Located at one of Watlow's manufacturing center of excellence (MCOE's), co-op participants will work on impactful projects in design, testing, automation, and manufacturing development. They will have the opportunity to apply classroom knowledge to real-world manufacturing projects while collaborating closely with mentors and experienced engineers. Co-ops development skills may include learning how to: * Design and build fixturing for product manufacturing. * Conduct experiments to aid manufacturing cell design. * Perform Gauge Repeatability and Reproducibility studies. * Develop lean manufacturing standard work. * Aid in the development of work instructions for manufacturing operators. * Test and analyze new and existing products (heaters, sensors, controllers, or software). * Build prototypes and participate in prototype and equipment design reviews. * Handle fabrication, tooling, wiring, and building control panels. * Complete reliability, experimental, and validation testing. * Setup and program automated assembly and inspection equipment. * Evaluate laboratory results. Qualifications: * Currently enrolled in an accredited university pursuing a bachelor's or master's degree in mechanical, industrial, electrical engineering, computer science, chemical engineering or a similar field. * Available to take a semester off from school to work at a Watlow facility. * Ability to start in January 2026 OR June of 2026. Additional Co-op Perks: * Housing stipend or corporate housing available. * Comprehensive onboarding and immersion plan. * Mentorship program and networking opportunities. * Opportunity to participate in and support local STEM and charitable initiatives. The Watlow co-op program offers students a chance to be part of a team working on projects that matter. It provides valuable experience beyond the classroom, allowing participants to build their engineering careers in a meaningful way. Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor or take over sponsorship of an employment visa at this time.

Company: The Boeing Company The Integrated Materials & Structures Technology Team within Boeing Technology Innovation (BTI) is seeking a Materials & Process Engineer (Associate, Mid Level or Senior) - Composites Materials, Process, & Physics Engineer (MP&P) to join our team in Berkeley, MO. This team is part of the Composites, Materials, & Structures organization within BTI. This group has a dual mission to 1) Execute Research and Development in the technical area of next-generation thermoset composites, with a particular focus on Boeing Defense, Space & Security (BDS) relevant materials and 2) Develop and mature applications for these new materials through advanced design and manufacturing demonstrator programs to de-risk and accelerate adoption by BDS programs. This experienced engineer will lead material selection, process development, characterization, and troubleshooting of polymer matrix and fiber-reinforced composite systems for aerospace applications. They also will be asked to lead manufacturing risk reduction demonstration programs to de-risk and accelerate adoption of new composite materials and manufacturing processes for BDS programs. This role offers hands-on exposure to lab-scale manufacturing processes, mechanical and physical/chemical testing, data analysis, and cross-functional project work with early career and senior engineers. Position Responsibilities: Support development and optimization of composite materials-prepregs, adhesives, and core materials-and related consumables Define and validate manufacturing processes (e.g., layup, curing/autoclave/out-of-autoclave processing, consolidation) to be used on production programs Perform materials characterization and testing: mechanical (tensile, compression, shear), thermal (DMA, TGA, DSC), moisture uptake and microscopy Collect, analyze, and summarize experimental data; prepare test reports and present findings to the team Develop and maintain process documentation, work instructions, and process control plans for production transitions Support root-cause investigations and corrective actions for material and process related nonconformances Conduct supplier evaluations and material qualification activities Follow safety, quality and environmental procedures in the lab and manufacturing areas Basic Qualifications Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry 2+ years of experience in new material development, insertion, composite manufacturing process development Preferred Qualifications Advanced Engineering degree Understanding of composite materials and processing methods Familiarity with standard materials testing methods Knowledge of composite design considerations and failure modes Ability to read, understand, and interpret engineering drawings and specifications Knowledge of responsibilities and tasks performed by various engineering departments/disciplines; knowledge of the interaction between departments/disciplines and how their products/processes affect one another and impact non-engineering processes Strong problem solving and experimental skills; ability to apply knowledge of materials engineering and scientific principles to develop, design, analyze, test, and validate solutions for complex systems, sub-systems and designs Solid written and verbal communication skills; able to prepare clear test reports and presentations Proficiency in Microsoft Office (Excel, Word, PowerPoint); experience with data analysis tools Willingness to work in lab/manufacturing environments Travel: 10% Drug Free Workplace: Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range Associate: $64,600 -$87,400 Summary Pay Range Mid-Level: $77,350 -$104,650 Summary Pay Range Senior: $95,200 -$128,800 Language Requirements: Not Applicable Education: Bachelor's Degree or Equivalent Relocation: This position offers relocation based on candidate eligibility. Export Control Requirement: This position must meet export control compliance requirements. To meet export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.15 is required. “U.S. Person” includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Safety Sensitive: This is not a Safety Sensitive Position. Security Clearance: This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. Visa Sponsorship: Employer will not sponsor applicants for employment visa status. Contingent Upon Award Program This position is not contingent upon program award Shift: Shift 1 (United States of America) Stay safe from recruitment fraud! The only way to apply for a position at Boeing is via our Careers website. Learn how to protect yourself from recruitment fraud - Recruitment Fraud Warning Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. EEO is the law Boeing EEO Policy Request an Accommodation Applicant Privacy Boeing Participates in E - Verify E-Verify (English) E-Verify (Spanish) Right to Work Statement Right to Work (English) Right to Work (Spanish)

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Defense Space & Security (BDS) has an exciting opportunity for an Electrical Design and Analysis Engineer (Experienced-Senior) for the Flight Simulation Labs - Hardware Interface Systems team located in Berkeley, MO. The Flight Simulation Labs organization has expertise supporting marketing, design, development, integration, test and training objectives for Boeing military aircraft. As an Electrical Design and Analysis Engineer (Experienced-Senior), you will create and implement solutions to complex problems that support design, development, and execution of simulation environments in development labs for the F-15 Israel program. This position will support the project execution for the full product design life cycle including: requirements, design, acceptance test procedures, and associated engineering maintenance support. This position is expected to be 100% onsite and engaged with our customers and the product. The selected candidate will be required to work onsite at one of the listed location options. Position Responsibilities: Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Research specific technology advances for potential application to company business needs. Basic Qualifications (Required Skills and Experience): Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement Level 3: 5+ years of work related experience and a bachelor's degree or an equivalent combination of work related experience and technical education Level 4: 9+ years of work related experience and a bachelor's degree or an equivalent combination of work related experience and technical education Preferred Qualifications (Desired Skills and Experience): Electrical engineering experience Experience in avionics, electrical, and/or a mission systems role Experience developing or integrating avionics or mission systems Experience in Agile Software Development and JIRA Experience managing projects and utilizing standard project management tools Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features: Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $129,200-$174,800 Applications for this position will be accepted until Jan. 05, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. 120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.