Research and development engineer jobs in Boynton Beach, FL - 319 jobs

ECF Engineering Consultants is a full-service engineering firm specializing in providing technical solutions to the Energy Markets and to the public and private sectors that require electrical and mechanical engineering support. We serve these entities across a range of projects, offering consultation on technology utilization, design solutions for electrical and mechanical systems, public health systems, and equipment procurement and construction-phase services. General Description of Position: Principal Mechanical Engineer to oversee HVAC, electrical, and plumbing projects within the Building Services Group. MEP engineering design for commercial, institutional, industrial, municipal, and residential HVAC, electrical, and plumbing projects. The candidate shall have expertise in HVAC, electrical, or plumbing system design, as well as in energy efficiency retrofits and energy management systems. They can solve complex problems innovatively and manage people, processes, and projects effectively. We seek someone who can coach, teach, and mentor other engineers. The candidate will be responsible for designing projects, preparing reports and specifications, and providing a very high level of technical leadership. This position requires a highly experienced, motivated professional to lead the department, drive innovation, and deliver high-quality engineering solutions that meet client needs and industry standards. Essential Functions of the Position: Leadership and Management Lead, mentor, and manage a team of engineers and designers across HVAC, Electrical, and Plumbing disciplines. Foster a culture of collaboration, technical excellence, and continuous improvement. Develop and implement departmental goals, strategies, and best practices Project Oversight Supervise the technical aspects of MEP projects from concept to completion. Ensure project designs comply with codes, standards, and client requirements. Review and approve designs, calculations, and technical documents. Coordinate with other departments to ensure seamless integration of MEP systems within overall project designs. Technical Expertise Provide advanced technical guidance and troubleshooting for complex MEP systems. Stay updated with emerging technologies, trends, and regulations in the MEP field. Lead the implementation of innovative solutions to improve design efficiency and sustainability. Client and Stakeholder Engagement Serve as the primary technical point of contact for clients on MEP-related matters. Develop and maintain strong client relationships, ensuring satisfaction and repeat business. Support the business development team in preparing proposals, presentations, and technical estimates. Operational Excellence Establish and enforce quality assurance and quality control (QA/QC) standards. Monitor project budgets, schedules, and resources to ensure timely and cost-effective delivery. Manage the allocation of departmental resources for optimal performance. Training and Development Identify training needs and promote professional development for team members. Organize workshops, seminars, and other knowledge-sharing activities. Position Characteristics: Self-starter and outgoing personality traits Demonstrated leadership skills Ability to take direction and act independently Strong communication and organization skills Ability to manage multiple priorities and stay organized while doing so. Position Requirements: Bachelor's degree in mechanical, electrical, or a related engineering field. A master's degree is preferred. A Professional Engineer (PE) license is required. Minimum of 7-10 years of experience in MEP engineering, with at least 3 years in a leadership role. Strong HVAC, Electrical, and Plumbing systems design and implementation expertise. Proficient in industry software such as AutoCAD, Revit, and engineering analysis tools. In-depth knowledge of building codes, standards, and regulations (e.g., ASHRAE, NEC, IPC). Proven experience managing multidisciplinary teams and large-scale projects. Excellent communication, problem-solving, and decision-making skills. Commitment to sustainability and energy-efficient designs is a plus. Work Environment: The position requires both office-based and occasional on-site work. May involve some travel to client locations and project sites.

Topa Group is partnered with a premier luxury residential audio-visual and smart home integration firm specializing in high-end, custom residential projects. They partner with homeowners, architects, builders, and interior designers to deliver world-class technology solutions with exceptional design and performance. Position Summary The Luxury Residential AV Design Engineer is responsible for the design and engineering of high-end residential audio-visual, lighting, shading, control, and networking systems. Key Responsibilities Design and engineer luxury residential AV and smart home systems Create detailed system drawings and documentation using AutoCAD, Bluebeam, and Visio Design and support Lutron and Crestron lighting and shading systems Develop control system designs using Control4 platforms Design and document residential networking and IT infrastructure Review architectural drawings and construction documents Participate in client meetings, design reviews, and presentations as needed Support project teams through installation, commissioning, and project closeout Required Qualifications Proven experience designing luxury residential AV and smart home systems Proficiency in AutoCAD, Bluebeam, and Visio Hands-on experience with Lutron and Crestron lighting and shading Working knowledge of Control4 control systems Strong understanding of networking and IT design principles Professional communication skills and customer-facing experience Preferred Qualifications Industry certifications (Lutron, Crestron, Control4, AVIXA, Cisco, etc.) Experience working with architects, builders, and interior designers Background in high-end or custom residential environments Compensation & Benefits Competitive salary based on skillset Hybrid work schedule Comprehensive benefits package

Akkodis is seeking Heat Pump Engineer in Fort Lauderdale, FL 33309 Pay Range: $87k-92k yearly (The pay range may be negotiable based on experience, education, geographic location, and other factors) Job Title: Heat Pump Engineer Location: Fort Lauderdale, FL 33309 Duration: Direct hire Job Description: Duties & Responsibilities Assigned development projects or complex engineering assignments Perform HVAC system design evaluations and provide system solutions Incorporate health, safety, and environmental factors into system designs Provide strong technical input and a high level of accountability in engineering projects Create, conduct, and support test plans for unit rating, performance, and reliability testing. Support product design, bill of materials, modeling, and final assembly development. Lead and support specification, selection, and qualification of materials and components Support engineering team associates, manufacturing and operations, and material sourcing. Develop and implement cost reduction initiatives. Lead and support root cause analysis & problem solving implementation from start to finish. Assist in the development of department standards and procedures Qualifications Bachelor's degree in Mechanical Engineering, Electrical Engineering, or related field Minimum 3-5 years of experience in heat pump engineering or related HVAC field Professional Engineering (PE) license preferred HVAC certifications (e.g., NATE, ASHRAE) highly desirable Extensive knowledge of HVAC systems, particularly heat pump technologies Proficiency in CAD software for system design and modeling Strong analytical and problem-solving skills with attention to detail Excellent project management abilities and experience In-depth understanding of energy efficiency standards and regulations Familiarity with renewable energy technologies and their integration with heat pump systems Strong technical writing skills for preparing reports and documentation Ability to work independently and collaboratively in a team environment Excellent communication skills to interact with clients, contractors, and team members Willingness to travel locally for site visits and installations Equal Opportunity Employer/Veterans/Disabled Benefits offerings include but are not limited to: · 401(k) with match · Medical insurance · Dental Insurance · Vision assistance · Paid Time Off To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit ****************************************** The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: · The California Fair Chance Act · Los Angeles City Fair Chance Ordinance · Los Angeles County Fair Chance Ordinance for Employers · San Francisco Fair Chance Ordinance

Project Engineer - Capital Projects Lead (Pharma) Salary: $125,000 - $150,000 + 5% Bonus + Relocation Assistance + 401k (Immediate Vesting) + 3 Weeks PTO + Medical + Dental + Vision Location: Boca Raton, FL (Commutable from: Fort Lauderdale, West Palm Beach, Delray Beach, Pompano Beach) Are you a Senior Project Engineer pharma experience looking to lead multi-million dollar capital projects in a state-of-the-art facility? On offer is the chance to become the technical lead for massive facility expansions, where you will have full autonomy to shape the department, manage high-value equipment installations, and put your own stamp on a global brand. This specialist company is a market-leading biopharmaceutical innovator currently undergoing rapid growth, offering an elite culture for engineers who thrive on pioneering projects. They are looking for a high-status Engineer to manage the entire project lifecycle from planning and design to procurement and final commissioning. On offer is a high-responsibility role where you will be the "go-to" authority for all facility and equipment projects. You will lead the design and troubleshooting of niche process systems while working within a flexible Monday to Friday schedule that offers relocation assistance for the right technical expert. This role would suit a Senior Project Engineer looking leadership role where they can lead groundbreaking projects and be recognized as a technical expert in the field. The Role: Technical Lead: Manage the full lifecycle of big equipment and facility projects, including design, procurement, and installation. Pioneering Projects: Interpret P&IDs, lead AutoCAD design, and utilize statistical analysis to ensure world-class project delivery. Succession & Impact: Mould the department by leading technical writing for FDA submissions, CAPAs, and change controls. Recognition: Act as the primary consultant for the facility's most critical capital investments. The Candidate: Pharma Veteran: Must have a minimum of 10 years of engineering experience specifically within the pharmaceutical industry. Technical Depth: Proficient in equipment design, P&IDs, and navigating FDA/cGMP regulatory environments.

Job DescriptionR&D Sr. Lab TechnicianBoca Raton, FL Beauty innovation starts here. An exciting opportunity has opened up to join our R&D team as Lab Technician and join the world's leading partner for Turnkey Performance Product Solutions, Custom Formulation and Contract Manufacturing. Our team of expert chemists operates a state-of-the-art, in-house laboratory full-time to maximize research and development efficiency, streamline manufacturing processes, and significantly reduce time-to-shelf. We are seeking a highly skilled and detail-oriented Senior R&D Lab Technician to support advanced formulation work, testing, and scale-up activities within our cosmetic Research & Development team. The ideal candidate has strong laboratory expertise, deep familiarity with cosmetic lab practices, and the ability to guide junior technicians while contributing to efficient product development. We are looking for talent that is passionate about problem-solving, can use data to support conclusions and claims, and has a deep drive to ensure cosmetic products are held to the highest standards in quality and safety. Job Title: Lab Technician The Lab Technician works within the Cosmetic Solutions Innovation Lab and supports innovation activities, including raw material and finished product testing, laboratory scale batching, support research and development and Quality Control. The ideal candidate must be able to show a proven track record of accuracy, have excellent hands-on laboratory skills, good communication and interpersonal skills, and have a keen eye for detail. They will be self-motivated, solution-focused, highly detail-oriented, organized, and able to work autonomously. Responsibilities include, but are not limited to: Perform and oversee laboratory testing including pH, viscosity, melting point, specific gravity, titrations, and other tests as assigned. Weigh, measure, and mix raw materials in accordance with safety protocols, SOPs, and GMP requirements. Complete batch adjustments as needed to achieve the targeted final formulation, ensuring product performance, stability, and quality requirements are met. Prepare accurate and reproducible laboratory-scale batches based on formulas, prototypes, and written development instructions. Document all results, maintain detailed lab records, and ensure compliance with regulatory and quality standards. Assist chemists in preparing technical documents, sample filling, labeling, and project documentation. Conduct scale-up testing and collaborate with production teams during pilot and full-scale manufacturing handoff. Participate in and support the formulation and development of prototype cosmetic products, including emulsions, gels, serums, cleansers, and color cosmetics. Write, update, and contribute to the development and improvement of department and company SOPs to ensure compliance, clarity, and operational efficiency Perform product stability testing, monitor changes over time, and record detailed observations. Maintain a clean, organized, and safe laboratory environment, including glassware processing, cleaning, and waste management. Ensure strict adherence to company SOPs, GMP standards, and all safety policies. Experience/Skills: Minimum 5 years hands-on experience with emulsions, surfactants, polymer systems, and formulation processing. Familiarity with INCI documentation, raw material documentation, and cosmetic regulatory requirements. Experience supporting pilot runs or manufacturing scale-up. Working knowledge of basic laboratory equipment and analytical skills such as pipetting, precision weighing, and dilutions. Ability to read and interpret data Strong communication skills Product batching and compounding experience a Plus. Computer skills: Proficient with Microsoft Outlook, Word and Excel. EDUCATION: BS/BA in Chemistry or related Science fields preferred. Benefits: Comprehensive Employer Contributed Medical plans offered for you and your family (including PPO) Dental and Vision Insurance for you and your family Employer Paid Life Insurance, including additional Voluntary Life and AD&D Flexible Spending Account and Dependent Care FSA Employee Assistance Program Annual Bonus Program Competitive PTO offered 401(k) Retirement Plans with up to 4% match Who we are: Cosmetic Solutions is a leader in the development and manufacturing of scientifically proven, innovative personal care products. With a focus on, face, body, hair, OTC, and professional use formulations, we create some of the most cost effective, high quality and powerful products on the market. Cosmetic Solutions LLC. is committed to equal employment opportunity for all employees and applicants for employment without regard to age, color, creed, disability status, gender, national origin, race, religion, sexual orientation or veteran status, or any other legally protected status.

We are seeking to recruit a Principal Optical Engineer for our location in Jupiter, Florida.

Benefits: 401(k) 401(k) matching Competitive salary Dental insurance Health insurance Paid time off Vision insurance Job Title: Electro-mechanical Engineer Reports to: Technical Director Overview: Join our dynamic team at Caliber Sales Engineering as an Electro-mechanical Engineer. As an Electro-mechanical Engineer, you will assume a leadership role in our technical team, leveraging your expertise in both electro-mechanical systems and manufacturing processes to oversee the assembly, repair, and optimization of complex machinery and equipment. This multifaceted role requires a strong foundation in electrical and mechanical engineering, coupled with hands-on experience in manufacturing, reverse-engineering, assembly, and repair environments. You will play a critical role in ensuring the functionality, reliability, and quality of electromechanical systems throughout their lifecycle. Prior experience in supporting/maintaining Northrop, Lockheed, or Raytheon radar systems is highly encouraged. Key Responsibilities Assembly and Integration: Design and develop assembly procedures, work instructions, and fixtures for electromechanical systems. Oversee the assembly process, ensuring components are correctly installed and systems are assembled according to specifications. Collaborate with design engineers to ensure designs are optimized for manufacturability and assembly. Repair and Maintenance: Diagnose and troubleshoot electromechanical systems to identify issues and root causes. Perform repairs and replacements of faulty components, ensuring equipment is restored to operational condition. Conduct preventive maintenance to extend equipment lifespan and minimize downtime. Quality Assurance: Develop and implement quality control processes to verify the functionality and performance of assembled systems. Conduct tests and inspections to ensure compliance with industry standards and customer requirements. Implement corrective actions to address quality issues and improve product reliability. Process Optimization: Analyze manufacturing and assembly processes to identify opportunities for improvement in efficiency, quality, and cost-effectiveness. Implement process enhancements and lean manufacturing principles to streamline operations and reduce waste. Continuously monitor and evaluate production metrics to achieve operational excellence. Documentation and Reporting: Maintain detailed documentation of assembly procedures, repair activities, and quality assurance measures. Generate reports on repair activities, equipment performance, and process improvements. Ensure compliance with documentation standards and regulatory requirements. Training and Support: Provide training and technical support to assembly technicians and repair personnel. Foster a culture of safety, quality, and continuous improvement within the assembly and repair team. Qualifications Education & Experience: Bachelors degree in Electrical Engineering, Mechanical Engineering, or a related field. Relevant certifications in electromechanical systems, manufacturing, or repair are advantageous. Equivalent work or military experience is also considered. Proven experience in electromechanical assembly, repair, and maintenance, preferably in a manufacturing or industrial environment. Strong knowledge of electrical and mechanical components, systems, and troubleshooting techniques. Hands-on experience with assembly tools, test equipment, and repair procedures. Familiarity with military operations and requirements Veteran with technical experience Experience in radar electronics troubleshooting and repair is advantageous. Knowledge of AC/DC circuits, digital electronics, pneumatics, hydraulics, controls Preferred 5+ years of experience. Experience with retrofitting and updating old architecture with new technology to continue product lifespan Technical Skills: Proficiency in CAD software for designing and analyzing electromechanical systems. Familiarity with PLCs, sensors, actuators, motors, and other electromechanical components. Experience with using 3D printers and CNC machines for modifying existing products and new product development Ability to interpret technical drawings, schematics, and specifications. Skills: Excellent problem-solving skills and analytical thinking. Strong communication and interpersonal skills for effective collaboration. Detail-oriented with a commitment to quality and continuous improvement. Ability to manage multiple tasks and priorities effectively. Personal Attributes Adaptability: Able to thrive in a dynamic environment with changing priorities and deadlines. Leadership: Capable of taking initiative and leading projects to successful completion. Team Player: Collaborative and supportive of colleagues across different disciplines. Innovative Thinking: Creative in proposing and implementing process improvements and solutions. Results-Driven: Motivated to achieve operational efficiency and deliver high-quality repairs and assemblies. US Citizen With ability to obtain Security Clearance This role offers an exciting opportunity for a skilled engineer with a passion for electromechanical systems and hands-on problem-solving. If you are ready to contribute your expertise to a team committed to excellence in manufacturing and repair, we encourage you to apply and join our organization. Full Time, On Site Equal Opportunity Statement: Caliber Sales Engineering is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, age, or any other federally protected class. Disclaimer: This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities required of the employee. Duties, responsibilities, and activities may change at any time with or without notice.

The Healthcare Imaging Engineer is responsible for the installation, maintenance, calibration, troubleshooting, and repair of medical imaging equipment, ensuring that all devices operate safely, reliably, and in compliance with manufacturer specifications and regulatory standards. This role works closely with radiology, cardiology, and other clinical departments to minimize downtime, enhance patient care, and optimize imaging system performance. KEY RESPONSIBILITIES: Install, configure, and test medical imaging systems (e.g., MRI, CT, X-ray, Ultrasound, PET, Nuclear Medicine, PACS). Perform preventive and corrective maintenance in accordance with manufacturer guidelines, hospital policies, and applicable regulations (e.g., Joint Commission, FDA, state). Troubleshoot and diagnose equipment malfunctions, coordinate with vendors and service providers when necessary. Maintain accurate service records, work orders, and equipment histories in the CMMS. Support imaging-related software, networks, and integration with hospital IT systems. Ensure compliance with radiation safety protocols, electrical safety standards, and infection control policies. Provide technical guidance and training clinical staff on proper use and care of imaging equipment. Participate in capital equipment planning, procurement evaluations, and acceptance testing of new systems. Stay current on emerging technologies, regulatory changes, and manufacturer updates. Assist in on-call coverage and emergency response for imaging equipment failures. Occasional after-hours or weekend work for urgent repairs and preventive maintenance. REQUIRED KNOWLEDGE & SKILLS: Ability to read and interpret schematics, service manuals, and technical documentation. Excellent problem-solving skills and ability to work under pressure. Strong communication and customer service skills to interact effectively with clinical and technical staff. Commitment to patient safety and confidentiality. EDUCATION/EXPERIENCE/LICENSURE/TECHNICAL/OTHER: Associate's or Bachelor's degree in Biomedical Engineering, Electrical Engineering, Electronics, or related field (or equivalent military or technical training). Minimum 3-5 years' experience servicing complex imaging systems in a healthcare environment. Strong knowledge of diagnostic imaging modalities and associated technologies. Familiarity with DICOM standards, PACS/RIS integration, and networking principles. Manufacturer certifications (e.g., GE, Siemens, Philips, Canon) preferred. Must clear background and drug test required.

This role does NOT offer visa sponsorship or visa transfer for work authorization. External applicants must be eligible to work in the US. Responsible for device engineering activities in the context of pharmaceutical research and development (R&D). The device engineer will be responsible for commercial manufacturing processes including semi-automated to automated and large-scale manufacturing and assembly operations. The device engineer will utilize industry standard and novel equipment, processes, and methodologies to transform raw materials, components, and parts into finished goods to the required standards of safety, quality, cost and delivery across supply chain channels. The device engineer will be responsible for developing, maintaining, and optimizing the supply chain with a keen eye for cost of goods (COGS) as applicable to raw material, manufacturing processes and overall supply chain. This position will be focused on orally inhaled and nasal drug products (OINDPs). The device engineer will interface with early device design teams and be responsible for independently providing direction, initiation, planning, coordination, implementation, execution, control, and completion of specific device project(s) ensuring consistency with organizational strategy, commitments, and goals. This is a hands-on position which requires daily tactical responsibilities leading up to strategic decisions. Essential Duties and Responsibilities • In support of the Product Development Teams, provide technical leadership in the device development area. • Lead and execute manufacturing activities of devices with a focus on orally inhaled and nasal drug products (OINDPs). • Responsible for developing and implementing best practices for manufacturing commercial products. • Develop, propose, and implement vision, strategy, policies, processes, and procedures to aid and improve business performance. • Lead scale-up and commercialization efforts. • Lead root cause investigations. • Lead life-cycle management efforts. • Lead and execute technical analyses including statistical analysis and tolerance analysis. • Document studies and author documents per US FDA, EMA, MHRA and other global health authority requirements. • Interface and lead activities with third party contract research, development, and manufacturing organizations. • Ensure that manufacturing strategies and processes are in place to meet business objectives and operational needs in terms of price, quality, and delivery targets and that enable the organization to function and compete effectively in the market. • Proactively evaluate the challenges faced by the business and take actions to mitigate risks and develop opportunities. • Contribute towards and maintain device design history files (DHF). • Document standard operating procedures (SOPs) for design controls and manufacturing in the context of pharmaceutical drug-device combination products. • Contribute towards overall business strategy and annual budget process. • Provide project updates/reporting through program governance. • Provide leadership and support for inter-site best practices (technology transfer, process validation, etc.) and phase appropriate guidelines and policies. • Execute project strategy, priorities, and milestones ensuring visibility and accountability. • Proactively lead with integrity and engage cross functional project teams and stakeholders. • Support organizational / departmental initiatives. • Prepare and conduct presentations to all levels of the organization which may include project technical and budgetary information. Qualification Requirements • An Master's in Mechanical Engineering, Electrical Engineering, Material Sciences or related discipline with 6 to 9 years is preferred. OR, a B.S. with equivalent device development experience in pharmaceutical or related field. • Experience with device development and manufacturing in the context of pharmaceutical R&D and product development is a must to have. • Must possess expert knowledge and experience with commercial scale device manufacturing and assembly processes including manual, semi-automated and/or commercial scale automated processes. • Must possess expert knowledge of manufacturing processes including injection molding and metal machining processes. • Must possess expert knowledge of mold tool design, optimization, qualification and life-cycle management. • Must possess expert knowledge of mechanical design with preference for SolidWorks. • Must possess expert knowledge of tools to conduct statistical and tolerance analysis. • Must possess knowledge of regulations and standards including US 21 CFR Part 820, ISO 13485, ISO 14971, ISO 10993, EU MDR etc. • Experience in development of orally inhaled and nasal drug products (OINDPs) is a plus. • Experience with Notified Bodies and CE marking is a plus. • Strong English language skills including writing ability and oral communication. • Demonstrates good judgment as well as cultural, social, and environmental awareness.

Mission The Manufacturing Engineer plays an important role in the growth and development of manufacturing of Century Arms. The individual will be responsible for working with our New Product Development (NPD) group in firearms assembly, precision machining, and regulated manufacturing as well as our Sustainment Engineering group for CNC Mills, Lathes, EDM, and other similar equipment to produce consistent precision components and assemblies. The position requires an individual who will be hands on and will use their technical ability, critical thinking skills, and leverage industry techniques to develop or modify fixtures to bring parts from raw material state (billet, castings, forgings, extrusions) and assemble to finished part. Responsibilities Develop, document, and validate assembly processes for firearms (e.g., barrel installation, trigger groups, bolt carrier groups, slide frame/mating). Create and maintain PFMEAS, control plans, work instructions, and process flow diagrams for gun assembly and sub-assembly. Implement lean manufacturing techniques (5S, value stream mapping, SMED) to reduce cycle times and scrap in firearm production. Apply proper machining strategies, toolpaths, cutting parameters, and tooling to optimize machining processes and achieve desired outcomes. Utilize knowledge of CNC machining techniques, including milling, turning, drilling, and grinding, to generate efficient and reliable programs for complex geometry and tight tolerances. Design tooling, fixtures, and work holding solutions for repeatable, high precision assembly, CNC machining operations, stability, and alignment. Analyze and optimize machining processes to improve cycle times, reduce scrap rates, and increase throughput. Conduct time studies and process simulations to identify opportunities for process improvement and efficiency gains. Implement Lean manufacturing principles and best practices to cut waste, streamline workflows, and enhance productivity in operations and assemblies. Collaborate with quality assurance personnel to address non-conformances, implement corrective actions, and drive continuous improvement in product quality. Perform dimensional inspections using precision measurement tools, such as micrometers, calipers, and CMMs (Coordinate Measuring Machines), to verify part dimensions and geometric tolerances. Provide training and technical support to CNC machinists and operators on program setup, operation, and troubleshooting. Foster a culture of continuous learning and skill development within the machining team, promoting knowledge sharing and cross-training to enhance capabilities and versatility. Adhere to all employment policies/safety policies/practices required by law/established by Company. Wear all necessary Personal Protective Equipment as always directed by Company. Immediately report any maintenance and/or safety issues to supervisor. Maintain respect, courtesy, a positive attitude and professionalism towards all co-workers and the Company. Actively participate and support the 5S process by maintaining a clean workstation and department. Other duties assigned as required. Qualifications & Knowledge Required To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. These requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Bachelor's degree in Mechanical, Industrial, Manufacturing Engineering, or a related field; or equivalent combination of education and experience. 3+ years of experience in CNC programming roles, with ability in CAM software (e.g., HSMWorks, Mastercam, Gibbs CAM, Edge CAM). 3+ years of experience in precision assembly manufacturing (firearms, aerospace, or medical devices preferred). Hands-on experience with firearm assembly (AR-15/AR-10, 1911, Glock-pattern, or bolt action platforms). Strong understanding of CNC machining principles, including G-code programming, toolpath generation, and machining parameters optimization. Operate a variety of CNC machine control types and to expect machine movement when proving out new programs. Knowledge of machining processes and materials, including metal cutting, tooling choice, and workpiece fixturing. Familiarity with CAD/CAM integration, CAD software (e.g., SolidWorks, Autodesk Inventor), and GD&T (Geometric Dimensioning and Tolerancing). Excellent critical thinking skills and the ability to troubleshoot technical issues related to CNC programming, machining, and tooling. Effective communication and people skills, with the ability to collaborate effectively with cross-functional teams and communicate technical concepts to non-technical stakeholders. Knowledge of Lean Manufacturing principles is highly desirable. General computer skills and familiarity with Microsoft Office Suite preferred. General mechanical ability is preferred. Knowledge of and experience with hand tools Adhere to essential functions of position such as attendance and timeliness. Ability to accept and follow directions.

Mission The Manufacturing Engineer plays an important role in the growth and development of manufacturing of Century Arms. The individual will be responsible for working with our New Product Development (NPD) group in firearms assembly, precision machining, and regulated manufacturing as well as our Sustainment Engineering group for CNC Mills, Lathes, EDM, and other similar equipment to produce consistent precision components and assemblies. The position requires an individual who will be hands on and will use their technical ability, critical thinking skills, and leverage industry techniques to develop or modify fixtures to bring parts from raw material state (billet, castings, forgings, extrusions) and assemble to finished part. Responsibilities * Develop, document, and validate assembly processes for firearms (e.g., barrel installation, trigger groups, bolt carrier groups, slide frame/mating). * Create and maintain PFMEAS, control plans, work instructions, and process flow diagrams for gun assembly and sub-assembly. * Implement lean manufacturing techniques (5S, value stream mapping, SMED) to reduce cycle times and scrap in firearm production. * Apply proper machining strategies, toolpaths, cutting parameters, and tooling to optimize machining processes and achieve desired outcomes. * Utilize knowledge of CNC machining techniques, including milling, turning, drilling, and grinding, to generate efficient and reliable programs for complex geometry and tight tolerances. * Design tooling, fixtures, and work holding solutions for repeatable, high precision assembly, CNC machining operations, stability, and alignment. * Analyze and optimize machining processes to improve cycle times, reduce scrap rates, and increase throughput. * Conduct time studies and process simulations to identify opportunities for process improvement and efficiency gains. * Implement Lean manufacturing principles and best practices to cut waste, streamline workflows, and enhance productivity in operations and assemblies. * Collaborate with quality assurance personnel to address non-conformances, implement corrective actions, and drive continuous improvement in product quality. * Perform dimensional inspections using precision measurement tools, such as micrometers, calipers, and CMMs (Coordinate Measuring Machines), to verify part dimensions and geometric tolerances. * Provide training and technical support to CNC machinists and operators on program setup, operation, and troubleshooting. * Foster a culture of continuous learning and skill development within the machining team, promoting knowledge sharing and cross-training to enhance capabilities and versatility. * Adhere to all employment policies/safety policies/practices required by law/established by Company. * Wear all necessary Personal Protective Equipment as always directed by Company. * Immediately report any maintenance and/or safety issues to supervisor. * Maintain respect, courtesy, a positive attitude and professionalism towards all co-workers and the Company. * Actively participate and support the 5S process by maintaining a clean workstation and department. * Other duties assigned as required. Qualifications & Knowledge Required To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. These requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Bachelor's degree in Mechanical, Industrial, Manufacturing Engineering, or a related field; or equivalent combination of education and experience. * 3+ years of experience in CNC programming roles, with ability in CAM software (e.g., HSMWorks, Mastercam, Gibbs CAM, Edge CAM). * 3+ years of experience in precision assembly manufacturing (firearms, aerospace, or medical devices preferred). * Hands-on experience with firearm assembly (AR-15/AR-10, 1911, Glock-pattern, or bolt action platforms). * Strong understanding of CNC machining principles, including G-code programming, toolpath generation, and machining parameters optimization. * Operate a variety of CNC machine control types and to expect machine movement when proving out new programs. * Knowledge of machining processes and materials, including metal cutting, tooling choice, and workpiece fixturing. * Familiarity with CAD/CAM integration, CAD software (e.g., SolidWorks, Autodesk Inventor), and GD&T (Geometric Dimensioning and Tolerancing). * Excellent critical thinking skills and the ability to troubleshoot technical issues related to CNC programming, machining, and tooling. * Effective communication and people skills, with the ability to collaborate effectively with cross-functional teams and communicate technical concepts to non-technical stakeholders. * Knowledge of Lean Manufacturing principles is highly desirable. * General computer skills and familiarity with Microsoft Office Suite preferred. * General mechanical ability is preferred. * Knowledge of and experience with hand tools * Adhere to essential functions of position such as attendance and timeliness. * Ability to accept and follow directions.

Manufacturing Engineer - updated 12 month contract Looking for candidates with some experience, hands on engineering skills. Preferably in the manufacturing, production environment. Candidate with a strong CAD modeling skills. Pay Range: $30-36.50 Manufacturing Engineer (Onsite): In this role, the candidate will design and develop manufacturing processes for products, taking in consideration problems inherent in the aftermarket production. Such design and development may include existing or revised processes. The candidate will also develop procedures for the economical production, repair, and overhaul in cooperation with MRO plant and production departments. In addition, the candidate will conduct tests and measurements throughout stages of production to determine control over applicable variables; and services, troubleshoots and solves production process problems with processes or equipment already in operation. The responsibility includes the troubleshooting and maintenance of testing equipment (electrical, hydraulic, electronic controls, and software). Previous work experience troubleshooting and maintaining testing equipment. CAD modeling experience preferred. What The Candidate Will Do: * Define optimum LRU configuration * Define optimum workscope and build standard for existing products * Review failure data, cost, and parts usage, across the repair site * Make decisions and recommendations based on this data review * Provide in-house advocacy for newly developed parts repairs/processes approval by Service Engineering and Collins Miramar Management. * Analyze removal causes and develop corrective actions * Optimize on-wing life for LRU by review of CMM and SAP data * Review shop visit data and provide recommendations to optimize the shop visit rate for LRU * Work with Service Engineering to develop new product workscopes based on data * Work in a team environment with Service Engineering, Program Engineering, Repair Engineering, FlightSense Technical Advisors, and Miramar Repair shop to optimize product reliability, maximize economical parts usage, and maintain high levels of customer satisfaction * Provide status to Management and Miramar Site Teams of top cost reduction initiatives in process * Maintain proficiency in assigned SAP products * Review shop and testing practices * Issue repair shop troubleshooting recommendations * Review receiving inspection and provides test verification recommendations * Provide recommendations for parts scrap, reuse, replacement, rework, and repair determination * Review component repair work * Perform failure and test reject analysis * Develop and reviews parts rework and repair procedures * Track, review, and analyze unit reliability * Provide shop training as required. Provides initial and recurrent shop technical and process flow training as required * Provide quality, product, and reliability improvement recommendations to the Engineering Manager * Optimize shop parts usage versus component reliability to assure Miramar repair site goals are met * Coordinate overall product line (Miramar repair shop) issues as required * Participate as a member of the implementation team for new product or customer programs * Perform and maintain active role in Financial Analysis of programs and implementation of corrective actions where required to achieve established program financial goals * Develop and maintains proficiency in the computer software required to perform the job functions. * Provide technical support to the Quality department and to the Quality Manager, regarding compliance issues * Provide technical support to the EH&S department regarding issues related to the environment, health, and safety * CAD modelling experience is preferred US Citizen and US Person candidates permitted Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC. is an equal opportunity employer. Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics. The Butler America Aerospace, LLC. EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices. Butler America Aerospace, LLC. is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at accommodations@butler.com.

About Us: As a global manufacturer of complex aircraft engine components, Pursuit Aerospace is founded on a commitment to relentless, continuous, operational improvement and extraordinary customer service. We pride ourselves on competitive cost structure, exceptional on-time delivery, and industry-leading quality. The Pursuit family of companies has cultivated long-term relationships with our customers around the world through respect, teamwork, technology, and trust. We are driven to develop industry leading process innovations and manufacturing techniques on behalf of our customers. Our exceptional quality is driven by a deep investment in and the daily practice of continually improving our people, processes, and products. About the Opportunity: We are looking for a Manufacturing Engineer to join our team in Stuart, FL. In this role, the Manufacturing Engineer will play a key role in developing, implementing, and optimizing manufacturing processes to ensure the production of high-quality aerospace components. This position requires a strong understanding of precision machining, aerospace industry standards, and continuous improvement methodologies. Location: Stuart, FL Onsite. 2nd Shift Monday to Friday 3:15 PM to 11:45 PM Responsibilities: Design, implement, and improve manufacturing processes to meet production goals, quality standards, and cost targets. Create and optimize CNC programs for milling, turning and other machining operations. Develop tooling and fixture designs to enhance machining efficiency and precision. Provide hands-on support to machinist and operators for troubleshooting and resolving production issues. Collaborate with other MFG Engineers to ensure manufacturability and adherence to specifications. Conduct root cause analysis and implement corrective actions for quality or process-related issues. Identify opportunities for process improvement and lead initiatives to enhance productivity and reduce waste. Utilize lean manufacturing and Kaizen methodologies to drive efficiency and process control. Prepare and maintain detailed manufacturing work instructions, routings, and process documentation. Ensure compliance with aerospace industry standards, including AS9100 and NADCAP. Participate in audits and ensure adherence to safety, quality, and regulatory requirements. Manage manufacturing projects from concept to completion, ensuring timelines and budgets are met. Coordinate with cross-functional teams, including production, quality, and procurement, to achieve project goals. Evaluate and recommend new tooling, equipment, and technologies to improve machining capabilities. Required Qualifications: Bachelor's degree in manufacturing engineering 2+ years of experience in a manufacturing or aerospace machining environment Must be authorized to work in the U.S. on a full-time bases without sponsorship now or in the future. The Company cannot offer employment to visa holders who require employer sponsorship in the future or cannot work now on a full-time basis. Must be able to perform work subject to ITAR/EAR regulations. Preferred Qualifications: Proficiency in CNC machining, programming, and set up. Knowledge of GD&T and aerospace standards. Strong problem solving and analytical skills. Proficiency in CAD/CAM software- preferably Siemens NX Familiarity with ERP/MRP systems Excellent communication skills and project management skills. Working Conditions: Work is performed in a climate-controlled, well lit, and reasonably clean aerospace manufacturing environment. Noise levels are generally below 80 decibels. Most work is performed on the shop floor in a manufacturing environment with required PPE. Role involves standing, walking, climbing stairs, and moving around equipment during daily activities. May occasionally involve stooping, kneeling, crouching, crawling, or lifting items up to 25 pounds. Work requires use of hands and arms to handle and manipulate parts, tools, and equipment. Tasks include a blend of hands-on activities with parts, tools, and equipment, and technical work such as reviewing data and using computer-based systems. Frequent interaction and communication with production teams, supply chain, and customers in a dynamic environment. Extended periods of focus and attention to detail may be required when working on technical projects. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions. Acknowledgements: The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor. Benefits: Pursuit Aerospace also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements, among other things. Equal Opportunity Employer: Pursuit Aerospace is an Equal Opportunity Employer. We adhere to all applicable federal, state, and local laws governing nondiscrimination in employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Immediately Hiring: Manufacturing Engineer Company: Dayton-Granger, Inc. Industry: Aviation and Aerospace Component Manufacturing About Us: YouTube: Dayton-Granger, Inc. Our Website: daytongranger.com Full Time | Direct Hire | Excellent Benefits | Great Work-Life Balance Position Overview: Dayton-Granger, Inc. (DG) is a third-generation, family-owned aerospace manufacturer that has specialized in antennas, lightning protection systems, and electrostatic components for commercial and military aircraft worldwide for over 82 years. What makes DG unique is that engineering, testing, and manufacturing all happen under one roof, giving our teams direct visibility, fast collaboration, and real influence on the products we build. The Manufacturing Engineer will play a hands-on role in developing, improving, and supporting our production processes on flight-critical products. This is not a desk-only role - you'll be on the floor working closely with Engineering, Quality, Supply Chain, and Production to troubleshoot issues, refine workflows, create clear work instructions, and drive continuous improvement. If you enjoy solving problems, improving how work gets done, and seeing your ideas implemented quickly, this role offers real ownership and visibility in a collaborative, integrated manufacturing environment. Responsibilities: Design and create new process flow and work instructions with the correct process lead times, capacity analysis, and resources (machines and labor). Assist in the development and implementation of advanced production processes and tooling methodologies. Develop and execute engineering evaluation plans for experimental or analysis of new materials, new processes or new improvements. Resolve technical process problems of significant impact to performance, cost or schedule. Review, analyze and coordinate the implementation of methods and procedures to control and improve manufacturing processes. Assist in the implementation of Lean principles and technologies. Implement and maintain process FMEA (Failure mode and effect analysis) on all DG core processes in the effort to mitigate the risk of process failures and their severity. Maintain DG manufacturing best practice database and workmanship standard. Interpret company policies and maintain safety and quality standards. Perform additional tasks assigned by management Follows all DG safety procedures as per company policies and per the Facility Engineer/Safety Director Minimum Qualifications: Bachelor's Degree in Mechanical, Manufacturing, Aerospace, or related Engineering field 5+ years of experience as a Manufacturing Engineer in a production environment (not just exposure - must have owned/manipulated processes) Hands-on experience developing or improving manufacturing processes, work instructions, or tooling Practical experience supporting assembly or production floor activities, troubleshooting issues, and implementing process improvements Working knowledge of one or more manufacturing methods such as machining, composites, forming, joining, or assembly (does not need to be all) Strong analytical skills - able to collect data, identify root causes, and develop solutions Strong communication and cross-functional collaboration skills - able to work effectively with Engineering, Quality, Supply Chain, and Production teams Ability to manage multiple priorities in a fast-paced manufacturing environment English fluency (written & verbal) Preferred: Experience with FMEA, Lean, Six Sigma, or continuous improvement programs Experience in aerospace/defense or another regulated high-reliability manufacturing environment Benefits: Relocation Assistance Affordable comprehensive insurance coverage (Medical, Dental, Vision). 401(k) match with immediate vesting. Complimentary Life Insurance Coverage with Option for Supplemental Coverage. PTO and Paid Holidays. Short Term and Long Term Disability. Tuition Reimbursement. Mental Health Benefits. Complimentary basic life insurance Paid Parental Leave. Excellent work-life balance. Dynamic and collaborative work environment. Access to cutting-edge technology and resources. Length of Service/Milestone Anniversary Gifts. Team Building Activities. On-Site Gym. Why You'll Love Working Here: We are a multigenerational team with members representing a diversity of cultures, educational backgrounds, experience levels, and ideas all 'making it happen' from one location in beautiful, coastal South Florida. We are a well-established supplier providing cutting edge products in support of long-term aerospace programs, while at the same time developing new products to meet the needs of new customers, programs, and up-and-coming markets. Additionally, DG loves its employees! The average employee tenure is around 8 years. Length of service milestones are celebrated company-wide, and employees may make selections of anniversary gifts. Compliance Notice: Equal Opportunity Statement: Dayton-Granger, Inc. is an Equal Opportunity Employer. We welcome applications from all qualified individuals, including veterans and individuals with disabilities. Export Compliance Notice: This position requires access to information subject to the Export Administration Regulations (EAR) and/or the International Traffic in Arms Regulations (ITAR). Therefore, applicants must be U.S. persons as defined by these regulations. A U.S. person includes a U.S. citizen, U.S. permanent resident, or an individual who is otherwise protected under 8 U.S.C. 1324b(a)(3). Pre-Employment Requirements: Employment is contingent upon successful completion of a background check and drug screening, in compliance with company policy and applicable law.

R&D Sr. Lab Technician Boca Raton, FL Beauty innovation starts here. An exciting opportunity has opened up to join our R&D team as Lab Technician and join the world's leading partner for Turnkey Performance Product Solutions, Custom Formulation and Contract Manufacturing. Our team of expert chemists operates a state-of-the-art, in-house laboratory full-time to maximize research and development efficiency, streamline manufacturing processes, and significantly reduce time-to-shelf. We are seeking a highly skilled and detail-oriented Senior R&D Lab Technician to support advanced formulation work, testing, and scale-up activities within our cosmetic Research & Development team. The ideal candidate has strong laboratory expertise, deep familiarity with cosmetic lab practices, and the ability to guide junior technicians while contributing to efficient product development. We are looking for talent that is passionate about problem-solving, can use data to support conclusions and claims, and has a deep drive to ensure cosmetic products are held to the highest standards in quality and safety. Job Title: Lab Technician The Lab Technician works within the Cosmetic Solutions Innovation Lab and supports innovation activities, including raw material and finished product testing, laboratory scale batching, support research and development and Quality Control. The ideal candidate must be able to show a proven track record of accuracy, have excellent hands-on laboratory skills, good communication and interpersonal skills, and have a keen eye for detail. They will be self-motivated, solution-focused, highly detail-oriented, organized, and able to work autonomously. Responsibilities include, but are not limited to: Perform and oversee laboratory testing including pH, viscosity, melting point, specific gravity, titrations, and other tests as assigned. Weigh, measure, and mix raw materials in accordance with safety protocols, SOPs, and GMP requirements. Complete batch adjustments as needed to achieve the targeted final formulation, ensuring product performance, stability, and quality requirements are met. Prepare accurate and reproducible laboratory-scale batches based on formulas, prototypes, and written development instructions. Document all results, maintain detailed lab records, and ensure compliance with regulatory and quality standards. Assist chemists in preparing technical documents, sample filling, labeling, and project documentation. Conduct scale-up testing and collaborate with production teams during pilot and full-scale manufacturing handoff. Participate in and support the formulation and development of prototype cosmetic products, including emulsions, gels, serums, cleansers, and color cosmetics. Write, update, and contribute to the development and improvement of department and company SOPs to ensure compliance, clarity, and operational efficiency Perform product stability testing, monitor changes over time, and record detailed observations. Maintain a clean, organized, and safe laboratory environment, including glassware processing, cleaning, and waste management. Ensure strict adherence to company SOPs, GMP standards, and all safety policies. Experience/Skills: Minimum 5 years hands-on experience with emulsions, surfactants, polymer systems, and formulation processing. Familiarity with INCI documentation, raw material documentation, and cosmetic regulatory requirements. Experience supporting pilot runs or manufacturing scale-up. Working knowledge of basic laboratory equipment and analytical skills such as pipetting, precision weighing, and dilutions. Ability to read and interpret data Strong communication skills Product batching and compounding experience a Plus. Computer skills: Proficient with Microsoft Outlook, Word and Excel. EDUCATION: BS/BA in Chemistry or related Science fields preferred. Benefits: Comprehensive Employer Contributed Medical plans offered for you and your family (including PPO) Dental and Vision Insurance for you and your family Employer Paid Life Insurance, including additional Voluntary Life and AD&D Flexible Spending Account and Dependent Care FSA Employee Assistance Program Annual Bonus Program Competitive PTO offered 401(k) Retirement Plans with up to 4% match Who we are: Cosmetic Solutions is a leader in the development and manufacturing of scientifically proven, innovative personal care products. With a focus on, face, body, hair, OTC, and professional use formulations, we create some of the most cost effective, high quality and powerful products on the market. Cosmetic Solutions LLC. is committed to equal employment opportunity for all employees and applicants for employment without regard to age, color, creed, disability status, gender, national origin, race, religion, sexual orientation or veteran status, or any other legally protected status.

We are seeking to recruit a Principal Optical Engineer for our location in Jupiter, Florida. The successful candidate will bridge multiple areas of technical expertise and experience to provide innovative and cost-effective solutions to demanding optical projection and imaging systems. RESPONSIBILITIES INCLUDE (BUT ARE NOT LIMITED TO): Core technical: • Invent new lens designs for complex opto-mechanical systems covering markets including digital imaging, aerospace and military, life-science, and entertainment. • Provide advanced analysis and characterization of optical systems, including customized performance simulations, in order to demonstrate compliance with detailed specifications. • Produce detailed optical tolerance and alignment budgets with as-built yield curves against performance metrics. • Reduce customer specifications and technical governing documents into design and test requirements; track compliance and verification through design completion. • Define (or develop) new compensation and optical performance tests to validate completed assemblies. • Act as systems/technical lead on projects, as required. • Present design outputs to the customer (write optical design reports and design review presentations including Preliminary Design Reviews and Critical Design Reviews) Sales and business development: • Support bid and proposal efforts thru preliminary designs and design evaluation. • Frequent and direct customer contact on projects you are supporting. • Write and present papers at technical conferences. Personnel development and recruiting: • Train other engineers on optical design methodologies, optical engineering best practice, and metrology • Interact and partner with engineering teams in Huntsville, AL, and Jena, Germany. • Identify, interview, and evaluate prospective new hires within engineering POSITION REQUIREMENTS: • Advanced degree; MS or PhD in Physics, Astronomy, Optics, Optical Engineering, or other equivalent area of expertise. • Related experience: > 10 years in the area of lens design, metrology, and system integration. • Proficiency in optical design and tolerancing using ZEMAX and/or CODE V. • Experience with software tools to automate optical design and analysis tasks (e.g., CODE V and ZEMAX macro languages, Python, Matlab, etc.) • Working knowledge of thin film physics and fabrication. • Excellent written and oral communication skills. • Must possess the following “soft skills”: Acts with Integrity, Attention to Detail, Clear Communicator, Goal Setting / Drives for Solutions, Prioritization/Multi-task, Problem Solver/Decision Maker, Self-Motivated, Team Player. • Familiarity with illumination and scattered light analysis using ZEMAX, FRED, or LightTools is preferred. • Knowledge of fabrication and manufacturing optical systems is highly desirable. • Competence in project management and leading a small team of engineers/designers is preferred. • Extended work hours may be required in order to meet project deadlines. • May require travel in support of customer meetings. • Relocation is strongly preferred, but not explicitly required, if an acceptable arrangement for remote location combined with extended onsite visits can be negotiated. • U.S. Citizenship or qualified U.S. worker.

Join our dynamic team as a Manufacturing Engineer, focusing on process development and optimization for components and systems. Lead projects to improve efficiency, reduce waste, and enhance product quality using Lean and Six Sigma principles. Responsibilities + Design, implement, and improve manufacturing processes for components and systems. + Optimize workflows to reduce waste and improve efficiency using Lean and Six Sigma principles. + Create and maintain work instructions, sequence cards, and process documentation. + Lead or support projects involving equipment installation, acquisition, and production line changes. + Collaborate with teams such as Engineering, Quality, and Assembly to ensure smooth product launches and engineering changes. + Manage timelines, resources, and budgets effectively. + Drive projects focused on improving cost, quality, delivery, and safety. + Analyze production data, identify root causes, and implement corrective actions. + Conduct time studies, line balancing, and ergonomic assessments. + Develop strategies for equipment, layouts, and material flow to meet business goals. + Ensure processes meet safety, quality, and regulatory standards. + Work with Quality Assurance to resolve issues and strengthen control plans. + Support audits and compliance with ISO and other standards. + Provide hands-on support to resolve production issues. + Recommend tooling, fixtures, and equipment upgrades. Essential Skills + Strong knowledge of manufacturing processes, equipment, and quality control. + Ability to manage multiple projects in a fast-paced environment. + Excellent analytical and problem-solving skills. + Familiarity with ERP systems and resource planning. + Continuous Improvement + Root Cause Analysis + Lean Manufacturing + 4+ years experience in a manufacturing environment + Bachelor's degree in Engineering Work Environment This position requires working onsite, with time split between the manufacturing floor and office environments. The role involves hands-on engagement with production processes, fostering a collaborative atmosphere for continuous improvement. Job Type & Location This is a Contract to Hire position based out of Fort Lauderdale, FL. Pay and Benefits The pay range for this position is $40.00 - $55.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Fort Lauderdale,FL. Application Deadline This position is anticipated to close on Jan 21, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

Benefits: 401(k) 401(k) matching Competitive salary Dental insurance Health insurance Paid time off Vision insurance Job Title: Electro-mechanical Engineer Reports to: Technical Director Overview: Join our dynamic team at Caliber Sales Engineering as an Electro-mechanical Engineer. As an Electro-mechanical Engineer, you will assume a leadership role in our technical team, leveraging your expertise in both electro-mechanical systems and manufacturing processes to oversee the assembly, repair, and optimization of complex machinery and equipment. This multifaceted role requires a strong foundation in electrical and mechanical engineering, coupled with hands-on experience in manufacturing, reverse-engineering, assembly, and repair environments. You will play a critical role in ensuring the functionality, reliability, and quality of electromechanical systems throughout their lifecycle. Prior experience in supporting/maintaining Northrop, Lockheed, or Raytheon radar systems is highly encouraged. Key Responsibilities Assembly and Integration: Design and develop assembly procedures, work instructions, and fixtures for electromechanical systems. Oversee the assembly process, ensuring components are correctly installed and systems are assembled according to specifications. Collaborate with design engineers to ensure designs are optimized for manufacturability and assembly. Repair and Maintenance: Diagnose and troubleshoot electromechanical systems to identify issues and root causes. Perform repairs and replacements of faulty components, ensuring equipment is restored to operational condition. Conduct preventive maintenance to extend equipment lifespan and minimize downtime. Quality Assurance: Develop and implement quality control processes to verify the functionality and performance of assembled systems. Conduct tests and inspections to ensure compliance with industry standards and customer requirements. Implement corrective actions to address quality issues and improve product reliability. Process Optimization: Analyze manufacturing and assembly processes to identify opportunities for improvement in efficiency, quality, and cost-effectiveness. Implement process enhancements and lean manufacturing principles to streamline operations and reduce waste. Continuously monitor and evaluate production metrics to achieve operational excellence. Documentation and Reporting: Maintain detailed documentation of assembly procedures, repair activities, and quality assurance measures. Generate reports on repair activities, equipment performance, and process improvements. Ensure compliance with documentation standards and regulatory requirements. Training and Support: Provide training and technical support to assembly technicians and repair personnel. Foster a culture of safety, quality, and continuous improvement within the assembly and repair team. Qualifications Education & Experience: Bachelor's degree in Electrical Engineering, Mechanical Engineering, or a related field. Relevant certifications in electromechanical systems, manufacturing, or repair are advantageous. Equivalent work or military experience is also considered. Proven experience in electromechanical assembly, repair, and maintenance, preferably in a manufacturing or industrial environment. Strong knowledge of electrical and mechanical components, systems, and troubleshooting techniques. Hands-on experience with assembly tools, test equipment, and repair procedures. Familiarity with military operations and requirements Veteran with technical experience Experience in radar electronics troubleshooting and repair is advantageous. Knowledge of AC/DC circuits, digital electronics, pneumatics, hydraulics, controls Preferred 5+ years of experience. Experience with retrofitting and updating old architecture with new technology to continue product lifespan Technical Skills: Proficiency in CAD software for designing and analyzing electromechanical systems. Familiarity with PLCs, sensors, actuators, motors, and other electromechanical components. Experience with using 3D printers and CNC machines for modifying existing products and new product development Ability to interpret technical drawings, schematics, and specifications. Skills: Excellent problem-solving skills and analytical thinking. Strong communication and interpersonal skills for effective collaboration. Detail-oriented with a commitment to quality and continuous improvement. Ability to manage multiple tasks and priorities effectively. Personal Attributes Adaptability: Able to thrive in a dynamic environment with changing priorities and deadlines. Leadership: Capable of taking initiative and leading projects to successful completion. Team Player: Collaborative and supportive of colleagues across different disciplines. Innovative Thinking: Creative in proposing and implementing process improvements and solutions. Results-Driven: Motivated to achieve operational efficiency and deliver high-quality repairs and assemblies. US Citizen - With ability to obtain Security Clearance This role offers an exciting opportunity for a skilled engineer with a passion for electromechanical systems and hands-on problem-solving. If you are ready to contribute your expertise to a team committed to excellence in manufacturing and repair, we encourage you to apply and join our organization. Full Time, On Site Equal Opportunity Statement: Caliber Sales Engineering is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, age, or any other federally protected class. Disclaimer: This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities required of the employee. Duties, responsibilities, and activities may change at any time with or without notice. Caliber's History Caliber Sales Engineering is a woman Owned Small Business founded in 1987. CSE was established as an export management company located in South Florida, USA. For more than 30 years Caliber Sales Engineering has grown significantly and provided support to both US and international end users with spares, repairs, system upgrades, onsite management, manpower, and other services. We have provided our services to both commercial and military clients. CSE has long established relationships with OEMs, manufacturers, and aftermarket repair facilities located in the US and globally to support our clients. With offices both in the US and in the Middle East we understand how to remain relevant in a constantly changing global environment. Over the last few years CSE has continued to develop and grow our in-house manufacturing and repair capabilities to include Form Fit & Function, upgrade, and the refurbishment focusing on military components. In addition, CSE has expanded capabilities to include the design and manufacture of power storage solutions. Caliber Sales Engineering is ISO 9001:2015 Registered, AS9100D & AS9120B Compliant and TRACE certified, we understand how important quality is and strive for continuous improvement Celebrating over 30 years in business! Our mission is to offer quality products and services at competitive prices with on-time scheduled deliveries. What distinguishes Caliber is our proven track record of achieving customer satisfaction through exceeding contract excellence by engaging with our customer and providing creative and innovative solutions and reducing our clients total cost of ownership, resulting in increased fleet and operational readiness.

Mission The Manufacturing Engineer plays an important role in the growth and development of manufacturing of Century Arms. The individual will be responsible for working with our New Product Development (NPD) group in firearms assembly, precision machining, and regulated manufacturing as well as our Sustainment Engineering group for CNC Mills, Lathes, EDM, and other similar equipment to produce consistent precision components and assemblies. The position requires an individual who will be hands on and will use their technical ability, critical thinking skills, and leverage industry techniques to develop or modify fixtures to bring parts from raw material state (billet, castings, forgings, extrusions) and assemble to finished part. Responsibilities Develop, document, and validate assembly processes for firearms (e.g., barrel installation, trigger groups, bolt carrier groups, slide frame/mating). Create and maintain PFMEAS, control plans, work instructions, and process flow diagrams for gun assembly and sub-assembly. Implement lean manufacturing techniques (5S, value stream mapping, SMED) to reduce cycle times and scrap in firearm production. Apply proper machining strategies, toolpaths, cutting parameters, and tooling to optimize machining processes and achieve desired outcomes. Utilize knowledge of CNC machining techniques, including milling, turning, drilling, and grinding, to generate efficient and reliable programs for complex geometry and tight tolerances. Design tooling, fixtures, and work holding solutions for repeatable, high precision assembly, CNC machining operations, stability, and alignment. Analyze and optimize machining processes to improve cycle times, reduce scrap rates, and increase throughput. Conduct time studies and process simulations to identify opportunities for process improvement and efficiency gains. Implement Lean manufacturing principles and best practices to cut waste, streamline workflows, and enhance productivity in operations and assemblies. Collaborate with quality assurance personnel to address non-conformances, implement corrective actions, and drive continuous improvement in product quality. Perform dimensional inspections using precision measurement tools, such as micrometers, calipers, and CMMs (Coordinate Measuring Machines), to verify part dimensions and geometric tolerances. Provide training and technical support to CNC machinists and operators on program setup, operation, and troubleshooting. Foster a culture of continuous learning and skill development within the machining team, promoting knowledge sharing and cross-training to enhance capabilities and versatility. Adhere to all employment policies/safety policies/practices required by law/established by Company. Wear all necessary Personal Protective Equipment as always directed by Company. Immediately report any maintenance and/or safety issues to supervisor. Maintain respect, courtesy, a positive attitude and professionalism towards all co-workers and the Company. Actively participate and support the 5S process by maintaining a clean workstation and department. Other duties assigned as required. Qualifications & Knowledge Required To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. These requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Bachelor's degree in Mechanical, Industrial, Manufacturing Engineering, or a related field; or equivalent combination of education and experience. 3+ years of experience in CNC programming roles, with ability in CAM software (e.g., HSMWorks, Mastercam, Gibbs CAM, Edge CAM). 3+ years of experience in precision assembly manufacturing (firearms, aerospace, or medical devices preferred). Hands-on experience with firearm assembly (AR-15/AR-10, 1911, Glock-pattern, or bolt action platforms). Strong understanding of CNC machining principles, including G-code programming, toolpath generation, and machining parameters optimization. Operate a variety of CNC machine control types and to expect machine movement when proving out new programs. Knowledge of machining processes and materials, including metal cutting, tooling choice, and workpiece fixturing. Familiarity with CAD/CAM integration, CAD software (e.g., SolidWorks, Autodesk Inventor), and GD&T (Geometric Dimensioning and Tolerancing). Excellent critical thinking skills and the ability to troubleshoot technical issues related to CNC programming, machining, and tooling. Effective communication and people skills, with the ability to collaborate effectively with cross-functional teams and communicate technical concepts to non-technical stakeholders. Knowledge of Lean Manufacturing principles is highly desirable. General computer skills and familiarity with Microsoft Office Suite preferred. General mechanical ability is preferred. Knowledge of and experience with hand tools Adhere to essential functions of position such as attendance and timeliness. Ability to accept and follow directions.