Research and development engineer jobs in Gastonia, NC - 660 jobs

Title: Mechanical Manufacturing Engineer Hours: AM Shift *This is NOT an entry level position, please do not apply if you do not have 3-5 years of working experience, you will not be considered at this time* If your application was recently rejected, please do not re-apply* Job Summary: The Manufacturing Engineer's primary function is to bridge the gap between Engineering and Operations and provide support to improve the overall efficiency and quality of the product and production cycle. Key Responsibilities: Support the mechanical (and basic electrical) assembly process by interpreting approved design models/drawings and communicating the solutions to the shop floor. Improve the overall efficiency of the plant assembly process, including fabrication and painting. Work with lead hands in production and develop engineering solutions for production issues and design errors. Assist in creating and implementing engineering change requests (ECR). Assist in improving product quality and consistency through refinements and improvements in the assembly process. Work with the Electrical and Mechanical assembly teams to ensure the build process's accuracy and support the Project Managers to ensure budget and timelines are protected. Support root-cause analysis and develop corrective measures with QA for issues that extend through the manufacturing process. Work with Engineering and Operations to develop methods, tools, jigs, etc., for improving the assembly Qualifications & Experience: College Diploma in Mechanical / Industrial Engineering Technology or University Degree in Mechanical / Industrial Engineering. Min 3-5 years of Manufacturing Engineering and manufacturing experience in fabrication and working in the production environment. Able to use SolidWorks, PDM, and ERP with at least two years of relevant experience. A minimum of one year of product design experience is required. The ability to read and interpret manufacturing drawings. Electrical knowledge would be considered an asset. Must have a valid driver's license and travel primarily in North America but potentially abroad. Additional Requirements: Demonstrated knowledge and understanding of OSHA. Understand how this position impacts the quality of products and services provided to our customers. Produce quality work (on-spec., on time, on budget) and take pride in your craft. Participate proactively in the continuous improvement process. Be self-motivated with a positive attitude and the ability to multi-task. Work well within a team environment or independently. Strong problem-solving and analytical skills. Excellent organizational, interpersonal, and communication skills. Maintain a professional, clean and safe work area.

Position will serve as a mechanical resource for Plant Engineering based in Hickory, NC facility. Main responsibility is to function as mechanical design support on project work to improve existing fiber optic cable manufacturing equipment. Job functions include: • Design tooling and/or mechanical assemblies utilizing Inventor or AutoCAD • Obtain quotes and order components • Revise equipment drawings • Develop experimental plans to validate designs • Assemble or oversee assembly of systems with opportunity for hands on work • Debug and resolve issues when integrating designs into production equipment • Work closely with a cross functional engineering team including IT, process and electrical engineers/technicians • Work with operations to update documentation and support training as needed Required Education: • BS in Mechanical Engineering, Mechanical Engineering Technology degree or comparable engineering experience Required Years and Area of Experience: 3+ Required Skills: • Experience with mechanical system design and integration • Ability to generate or modify mechanical models/drawings primarily using Inventor (or similar 3D CAD software), Vault and some AutoCAD • Knowledge and application of drafting standards including GD&T • Ability to work with machine shops/vendors to complete part procurement • Hands on experience with mechanical system troubleshooting such as pneumatic controls, flow control, water cooling systems, etc. • Experience with manufacturing equipment repair and maintenance • Experience managing mechanics/electricians for equipment assembly and installation

Title: Fire Fighting Foam Engineer Duration: Direct Hire We are seeking an experienced Fire Fighting Foam Engineer with extensive hands-on expertise to join our technical team. This critical role requires a seasoned professional who can leverage their deep practical knowledge of foam concentrate formulations, application systems, and field operations to drive product development, quality assurance, and technical support initiatives. Key Responsibilities: Product Development & Technical Expertise Design, develop, and optimize firefighting foam concentrates for various applications including Class A, Class B, and specialty formulations Conduct laboratory testing and field evaluations to assess foam performance characteristics including expansion ratio, drainage time, burnback resistance, and extinguishment capability Troubleshoot complex foam system issues and develop practical solutions for customer applications Stay current with industry standards (NFPA, UL, EN, ICAO) and ensure product compliance Hands-On Testing & Quality Control Perform hands-on foam testing using industry-standard equipment and protocols Conduct fire testing and live burn demonstrations to validate product performance Develop and refine testing procedures and quality control protocols Analyze foam samples and system performance data to identify improvement opportunities Technical Support & Customer Engagement Provide expert technical guidance to customers, distributors, and internal sales teams Conduct onsite evaluations of foam systems and recommend appropriate solutions Deliver technical training sessions on foam concentrate properties, proportioning systems, and application techniques Respond to emergency technical support requests and troubleshoot field issues Documentation & Compliance Prepare technical documentation including product data sheets, application guides, and test reports Maintain detailed records of formulations, testing results, and field performance Support regulatory compliance efforts and third-party certification processes Contribute to patent applications and intellectual property development Required Qualifications Experience & Education Minimum 10+ years of hands-on experience working with fire fighting foam concentrates and suppression systems Bachelor's degree in Chemical Engineering, Fire Protection Engineering, Chemistry, or related field (or equivalent practical experience) Direct experience with foam proportioning systems, delivery equipment, and application methods Technical Skills Deep understanding of foam chemistry, surfactant science, and fire suppression mechanisms Practical knowledge of foam concentrate types: AFFF, AR-AFFF, Class A, fluorine-free formulations Experience with fire testing protocols and foam performance evaluation Proficiency in troubleshooting proportioning systems including in-line eductors, balanced pressure systems, and pump proportioners Strong analytical skills with ability to interpret technical data and testing results Professional Competencies Demonstrated ability to work independently and manage multiple projects simultaneously Excellent problem-solving skills with a hands-on, practical approach Strong communication skills with ability to explain complex technical concepts to diverse audiences Willingness to travel occasionally for customer visits, field testing, and industry events Valid driver's license and ability to work in industrial and outdoor environments Preferred Qualifications Professional certifications in fire protection (CFPS, FPE) or related fields Experience with fluorine-free foam technology and emerging environmentally sustainable alternatives Background in industrial fire suppression applications (refineries, chemical plants, aviation facilities) Familiarity with CAD software and technical design tools Prior experience in manufacturing or quality control environments Physical Requirements Ability to lift and move equipment up to 50 pounds Comfortable working in laboratory, manufacturing, and outdoor field testing environments Capable of wearing personal protective equipment including fire suits and respirators Able to work in various weather conditions during field testing and demonstrations What We Offer Competitive salary commensurate with experience Comprehensive benefits package including health, dental, and vision insurance 401(k) retirement plan with company match Paid time off and holidays Opportunities for professional development and continuing education Collaborative work environment with industry-leading professionals Application Process Interested candidates should submit a resume detailing their hands-on experience with fire fighting foam systems and a cover letter explaining how their practical expertise aligns with this role. Client is an Equal Opportunity Employer We celebrate diversity and are committed to creating an inclusive environment for all employees. Vision insurance, 401(k), Medical insurance, Dental insurance

Department: Engineering Reports To: Senior Engineering Manager / Director of Engineering Classification: Full-Time, Exempt Estimated Compensation: $145-170k Hiring Requirement: Due to the nature of our work with federal government clients and compliance with applicable regulations, this position requires U.S. citizenship. Dual citizenship is not permitted for this role. Candidates must be able to provide documentation verifying sole U.S. citizenship status as part of the background check process. Focus: Integrations, AI/ML, Compliance Automation, Infrastructure Analysis Overview You'll be the backend powerhouse responsible for building KnoxAI's core compliance engine-integrating with third-party services, implementing AI-driven analysis, and automating the complex workflows required for FedRAMP and DISA authorizations. Your work will directly impact federal agencies' ability to assess and authorize SaaS applications securely and efficiently. This role is ideal for a senior engineer who loves solving hard integration problems, working with cutting-edge AI/ML technologies, and building systems that must be both highly reliable and auditable for government compliance. Responsibilities Core Platform Development KSI Compliance Engine: Build automated validation for Key Security Indicators across 26+ KSI families (CNA, IAM, SVC, MLA, etc.) with hybrid automated + AI-driven scoring Integration Pipelines: Develop and maintain integrations with FedRAMP-authorized services: Security: CrowdStrike (SIEM, EDR, CNAPP), AWS Security Hub, GuardDuty, Inspector, CloudTrail IAM/PAM: Okta, Keeper (via CLI/SDK for just-in-time access, session metadata, audit logs) Operations: Jira (CAB approvals), ServiceNow (ITSM), PagerDuty (incident response) Training/Awareness: KnowBe4 (security awareness metrics) IaC Automation: Spacelift (run history, plan diffs, approvals, rollback info) Infrastructure Analysis: Parse and analyze Terraform/CloudFormation to identify NIST SP 800-53 control alignment and misconfigurations DAST Implementation: Enhance and productionize OWASP ZAP integration for dynamic application security testing of customer SaaS applications Document Repository: Build secure, controlled repository for customer-specific documentation with AI-powered SSP overlay generation AI/ML Integration Model Orchestration: Implement multi-model workflows combining OpenAI (GPT-4o), Anthropic (Claude), Google (Gemini), and Groq for compliance reasoning Model Context Protocol: Build MCP tools exposing platform capabilities to AI agents (user management, findings retrieval, KSI analysis) Fine-Tuning Pipeline: Collaborate on QWEN fine-tuning using Knox's decade of FedRAMP/DISA assessment data Prompt Engineering: Design and optimize prompts for compliance analysis, risk scoring, and remediation recommendations Vector Search: Implement RAG (Retrieval-Augmented Generation) for policy/control lookup using OpenSearch or dedicated vector DB Data Layer & Scalability Database Design: Extend Prisma schema for new features; optimize complex queries across 35+ models Caching Strategies: Implement Redis caching for frequently accessed compliance data and KSI results Event-Driven Architecture: Build SQS-based job queues for long-running compliance evaluations and bulk imports API Performance: Ensure API response times Multi-Tenancy: Maintain strict team-based data isolation; implement row-level security where needed DevOps & Reliability Monitoring: Instrument code with CloudWatch metrics, structured logging, and distributed tracing Error Handling: Implement robust retry logic, circuit breakers, and graceful degradation for third-party API failures Testing: Write comprehensive unit and integration tests (Jest); achieve >80% code coverage on critical paths Documentation: Maintain up-to-date API documentation (OpenAPI), architecture decision records (ADRs), and runbooks Required Qualifications Technical Skills 5+ years backend development with TypeScript/Node.js; deep understanding of async patterns, streams, and event loops NestJS or similar frameworks (Express, Fastify, Koa) with dependency injection and modular architecture PostgreSQL expertise: Complex joins, CTEs, window functions, indexing strategies, query optimization Prisma ORM or similar (TypeORM, Sequelize) with migrations and schema management RESTful API design: Pagination, filtering, sorting, error handling, versioning, rate limiting AWS services: S3, Lambda, SQS, DynamoDB, OpenSearch, Secrets Manager, IAM policies AI/ML APIs: Hands-on experience integrating OpenAI, Anthropic, Google Gemini, or similar (not just basic prompts-complex workflows, streaming, function calling) Integration & Automation Third-party API integration: OAuth2, SAML, webhooks, retry logic, API versioning, SDK usage Infrastructure-as-code familiarity: Ability to parse Terraform/CloudFormation and understand resource configurations Security testing tools: Experience with OWASP ZAP, Burp Suite, or similar DAST/SAST tools Message queues: SQS, RabbitMQ, Kafka, or similar for async job processing Soft Skills & Mindset Ownership mentality: End-to-end ownership of features from design → implementation → deployment → monitoring Problem solver: Thrives on debugging complex issues across distributed systems and third-party integrations Detail-oriented: Compliance work requires precision-small errors can have big consequences Collaborative: Works closely with frontend engineer, engineering manager, and CTO; clear written communication Bonus/Preferred GRC/compliance background: Prior work in cybersecurity, audit, or compliance automation FedRAMP/DISA knowledge: Understanding of NIST SP 800-53, FedRAMP requirements, or DISA STIGs QWEN or other OSS model fine-tuning experience LangChain, Haystack, or similar AI orchestration frameworks Bun runtime experience or strong enthusiasm for adopting modern JavaScript tooling Docker/containerization for local development and AWS ECS/Fargate deployments GraphQL (future roadmap consideration) If selected to move forward, you will be asked to provide: A short Loom video walking through a passion project, including what it does and a review of some of the code. Access to either a public or private repository so we can review their commits and overall code quality. Ideally, the project should be built on (or close to) the stack outlined in the job descriptions. Benefits & Perks Knox offers a competitive employee benefits package including Medical, Dental, Vision, Life & Disability, unlimited PEO, and an employee funded 401k plan. Please note, benefits are subject to change. We are an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, veteran status, or any other legally protected status.

Position will serve as a mechanical resource for Plant Engineering based in Hickory, NC facility. Main responsibility is to function as mechanical design support on project work to improve existing fiber optic cable manufacturing equipment. Job functions include: • Design tooling and/or mechanical assemblies utilizing Inventor or AutoCAD • Obtain quotes and order components • Revise equipment drawings • Develop experimental plans to validate designs • Assemble or oversee assembly of systems with opportunity for hands on work • Debug and resolve issues when integrating designs into production equipment • Work closely with a cross functional engineering team including IT, process and electrical engineers/technicians • Work with operations to update documentation and support training as needed REQUIREMENTS: PPE Required: Safety Glasses, Safety Gloves, Safety Shoes, Ear Plugs Required Education: • BS in Mechanical Engineering, Mechanical Engineering Technology degree or comparable engineering experience Required Years and Area of Experience: 3+ Required Skills: • Experience with mechanical system design and integration • Ability to generate or modify mechanical models/drawings primarily using Inventor (or similar 3D CAD software), Vault and some AutoCAD • Knowledge and application of drafting standards including GD&T • Ability to work with machine shops/vendors to complete part procurement • Hands on experience with mechanical system troubleshooting such as pneumatic controls, flow control, water cooling systems, etc. • Experience with manufacturing equipment repair and maintenance • Experience managing mechanics/electricians for equipment assembly and installation Desired Skills: • Familiarity or experience with plastic extrusion manufacturing • Experienced in electrical system troubleshooting including low and medium voltage systems, motion control, PLCs, temperature control systems, etc • Working knowledge of data analysis techniques using Microsoft Excel, PI and/or PowerBI Soft Skills (Communication/Team/Leadership): • Works well in a team environment, is a “self-starter” and “results oriented”. • Acts and makes decisions in the best interest of the team. • Complies with all policies and procedures of the plant. • Works well with other disciplines (IT, electrical, and process engineering) to fully understand manufacturing system functionality and design requirements. • Experience working in a manufacturing floor or construction environment, with a strong focus on job site safety. Proactive regarding safety. Seeks to identify and correct potential safety or environmental issues before they occur.

Title: Mechanical Engineer III Work Schedule: 8-10 hours/day, M-F. Interview Process: 1st round phone screen, 2nd round onsite Travel Requirements: Negligible Position will serve as a mechanical resource for Plant Engineering based in Hickory, NC facility. Main responsibility is to function as mechanical design support on project work to improve existing fiber optic cable manufacturing equipment. Job functions include: Design tooling and/or mechanical assemblies utilizing Inventor or AutoCAD Obtain quotes and order components Revise equipment drawings Develop experimental plans to validate designs Assemble or oversee assembly of systems with opportunity for hands on work Debug and resolve issues when integrating designs into production equipment Work closely with a cross functional engineering team including IT, process and electrical engineers/technicians Work with operations to update documentation and support training as needed PPE Required: Safety Glasses, Safety Gloves, Safety Shoes, Ear Plugs Required Education: BS in Mechanical Engineering, Mechanical Engineering Technology degree or comparable engineering experience Required Years and Area of Experience: 3+ Required Skills: Experience with mechanical system design and integration Ability to generate or modify mechanical models/drawings primarily using Inventor (or similar 3D CAD software), Vault and some AutoCAD Knowledge and application of drafting standards including GD&T Ability to work with machine shops/vendors to complete part procurement Hands on experience with mechanical system troubleshooting such as pneumatic controls, flow control, water cooling systems, etc. Experience with manufacturing equipment repair and maintenance Experience managing mechanics/electricians for equipment assembly and installation Desired Skills: Familiarity or experience with plastic extrusion manufacturing Experienced in electrical system troubleshooting including low and medium voltage systems, motion control, PLCs, temperature control systems, etc. Working knowledge of data analysis techniques using Microsoft Excel, PI and/or Power BI. Soft Skills (Communication/Team/Leadership): Works well in a team environment, is a "self-starter” and "results oriented”. Acts and make decisions in the best interest of the team. Complies with all policies and procedures of the plant. Works well with other disciplines (IT, electrical, and process engineering) to fully understand manufacturing system functionality and design requirements. Experience working in a manufacturing floor or construction environment, with a strong focus on job site safety. Proactive regarding safety. Seeks to identify and correct potential safety or environmental issues before they occur.

As a Project Engineer at Graycor, you will enroll in our Engineering Mentoring Program designed to expose you with the critical hands-on experience necessary to build your successful career in construction. You will receive ongoing, specialized one-on-one training, coaching and mentoring on a variety of challenging and interesting project assignments, and a full rotation between departments. You will be actively involved in your career development, making self-assessments of your progress against established core competencies. Engineers will typically spend 24 months in the Engineer Mentoring Program before advancing to a new position with Graycor. AS A PROJECT ENGINEER, YOU WILL GAIN EXPERIENCE IN THE FOLLOWING AREAS: Project Management/ Project Controls: Assist Project Manager and Superintendent in the efficient control and management of the project, while ensuring safety and quality programs are being executed on the project site. Develop and maintain the critical path project schedule, including ongoing revisions. Assist the Project Manager and/or Superintendent in the preparation of short-term look-ahead schedules and the application of Lean Construction techniques. Maintain project documentation and expedite to the Owner, Architect, and Engineers for approval. Develop and maintain a thorough understanding of the provisions and requirements of all contract documents, including plans, specifications, owner's contract, subcontracts and purchase orders. Assist in the procurement of equipment and materials, and track and expedite their delivery. Track and evaluate subcontractor and vendor performance. Interact with subcontractors and vendors regarding technical and contractual matters. Estimating/ Preconstruction Services: Assist in the preparation of estimates and quotations to obtain project work. Assist the Project Manager and/or Estimator in bid preparation, subcontractor/vendor solicitation, evaluation and award. TO BE SUCCESSFUL IN THE GRAYCOR ENGINEERING MENTORING PROGRAM, YOU WILL NEED: Bachelor's degree in construction management, engineering, or other relevant technical discipline. 0-3 years of relevant construction internship or post-undergraduate experience. The ability to travel extensively and temporarily reside at the project site for extended periods of time, with travel home provided every other weekend. Travel subsistence pay and travel incentive bonuses may apply. Ambition to grow professionally and acquire new knowledge and skills. Our most successful Engineers are motivated to succeed and are passionate about construction across a variety of projects. Our typical project portfolio includes retail mall development, entertainment/ recreational, hospitality/lodging, office, logistics/distribution and cold storage, manufacturing, and green/ LEED building industries. The fortitude to juggle competing priorities in a fast-paced environment. Multi-tasking with a sense of urgency while maintaining strong attention to detail and accuracy is crucial. Effective communication skills, with the ability to interact professionally with managers, co-workers, subcontractors, and construction craft employees. Problem solving and critical thinking skills. Working knowledge of MS Office Suite. Additional basic knowledge of scheduling, estimating and takeoff software is a plus. We use Primavera P6, WinEst and On-Screen Takeoff.

The ideal candidate will be responsible for assisting the Project Manager, Superintendent, and Project Team with project documentation and control, job cost accounting, scheduling, and construction supervision efforts. In order to be successful, this candidate should feel comfortable taking on many tasks that require various skills, and appropriately prioritizing those tasks' completion. Responsibilities Assist office and on-site management to ensure project success Ensure project plan is moving forward to meet anticipated deadlines Prepare RFI's & Submittal's and material takeoffs Processes material receiving documentation and assist cost coding Maintain accurate and updated logs for weekly progress tracking Qualifications Bachelor's degree in Mech/Civil Engineering, Construction Management, or equivalent experience 1 - 3 years' of experience as a Project Engineer Intern or other construction related fields Ability to learn construction technology software i.e. Bluebeam, Procore, P6, and Microsoft Office Familiarity with safety rules, regulations, best practices and QA/QC performance standards Prior Water & Wastewater knowledge or work experience preferred

RELOCATION ASSISTANCE: No relocation assistance available CLEARANCE TYPE: NoneTRAVEL: NoDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Northrop Grumman's Space Sector is seeking a Material and Process Engineer - Level 2 to join our team in Charlotte, NC. This position is 100% onsite and cannot accommodate telecommute work. An organization within Northrop Grumman's, SYNOPTICS is the world-wide leader in the growth, fabrication, and coating of crystalline materials used in laser systems. These “solid-state” laser crystals are used in products ranging from medical lasers to military laser systems. The Charlotte facility has been operating for over 40 years in the laser industry and has developed the reputation of providing the highest quality products with timely deliveries. Within the facility, solid-state oxide and fluoride crystals are grown from a high-temperature melt. SYNOPTICS has full optical fabrication capabilities for various plano and spherical geometries. SYNOPTICS serves the photonics and optics industry across the globe. Learn more about SYNOPTICS at our website: ************************************************* In this job, you will: Develop crystal growth processes for materials new to SYNOPTICS. Work with manufacturing personnel to develop, improve, document, and transition new processes to manufacturing. Developing a thorough understanding of the current crystal growth techniques at SYNOPTICS. Some sustaining engineering duties will be assigned in which the engineer will be responsible for an established growth process including data collection, process control, designed experiments, process documentation, and operator training. Written documentation will be required for new processes and process improvements. Participate in process improvement projects as a team member or lead and technical training for manufacturing employees (training may require some shift flexibility on a limited basis.) Participate in developing new business opportunities which may include responding to government solicitations and attending/presenting at technical conferences. Basic Qualifications: Bachelor's degree with 2 years of professional experience - OR - Master's degree with 0 years of professional experience. No clearance required to start Crystal Growth or materials processing and synthesis experience with specific knowledge of solidification principles, intrinsic growth defect formation, understanding phase diagrams, and solid-liquid chemistry of oxide systems is required. A strong grasp on engineering principles is required Knowledge of Six Sigma and Lean Manufacturing techniques is beneficial Must be a self-starter and have excellent analytical skills as well as good verbal and written communication skills. Preferred Qualifications: Experience in solid state crystal growth is preferred Masters Degree or PhD preferred Hazardous Materials: Hydrochloric, Sulfuric, and Phosphoric Acids; Acetone, Methanol Curious about all the exciting developments with the Northrop Grumman Space Sector? Click the link below: ************************************* Primary Level Salary Range: $79,600.00 - $119,400.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Creating Long-Term Value Thru Relentless Innov ati on ATI is a global manufacturer of technically advanced specialty materials and complex components. Our products support diverse markets and industries such as aerospace and defense, oil & gas, electrical energy, medical, automotive, and other industrial markets. R&D Engineering Co-op: Machine Learning Research Location: ATI - Monroe, NC (30 minutes outside Charlotte) Duration: Six months (with flexibility to align with graduate program schedules) About ATI's Graduate Intern Program ATI's Research & Development Engineering Intern Program is designed for graduate students who have a passion for innovation and a desire to apply their expertise to meaningful, real-world challenges. Interns are welcomed as colleagues and work alongside experienced professionals, contributing to projects that advance ATI's leadership in specialty materials and solutions. Based at ATI's Monroe, NC facility, this program provides a unique opportunity to engage in applied research and development in advanced titanium and nickel-based alloys. Participants gain hands-on experience in ATI's fast-paced R&D environment while applying advanced machine learning and artificial intelligence techniques to support ATI's mission of delivering highly engineered products for critical applications. Position Summary We are seeking a highly motivated Master's or PhD student in Computer Science, Data Science, or a related discipline to join ATI's Research & Development organization. The successful candidate will focus on the development and application of machine learning methods for image detection and multimodal AI systems, supporting ATI's efforts to drive innovation in metallurgy and advanced manufacturing. Key Responsibilities Develop and implement ML/AI models for image detection and classification of metallurgical microstructures and defects. Investigate and apply multimodal AI methods to integrate image, sensor, and process data. Design and maintain data pipelines for preprocessing, augmentation, and analysis. Collaborate with ATI engineers and researchers to translate computational results into practical insights. Document results and contribute to internal reports, presentations, and technical reviews. *It is ATI's policy to not provide immigration sponsorship for any of the company's positions. ATI and its subsidiary companies will provide equal employment opportunities to all applicants without regard to applicant's race, color, religion, sex, gender, genetic information, national origin, age, veteran status, disability status, or any other status protected be federal or state law. The company will provide reasonable accommodations to allow an applicant to participate in the hiring process if so requested.

Position Overview We are seeking an engineer with growing to advanced expertise in expanded PTFE devices. This role supports and leads product development efforts for components that rely on the unique structural and mechanical behavior of ePTFE. The position ranges from an independent technical contributor at the Engineer II level to project level leadership at the Senior Engineer level. Key Responsibilities Contribute to or lead the design and development of devices that incorporate ePTFE, including concept generation, prototyping, process development, and design refinement. Develop and optimize manufacturing processes for ePTFE constructs such as tubes, films, sheets, grafts, and custom structures. Create and execute material and device level test methods including tensile testing, burst strength, leak testing, suture retention, and permeability characterization. Support supplier engagement, raw material qualification, and specification development. Participate in risk management activities including design failure mode analysis and material risk assessments. Prepare clear technical documentation including design histories, protocols, reports, and regulatory support files. Work closely with the R&D team, quality, operations, and customers to ensure products meet user needs and comply with relevant standards. Troubleshoot product and process issues through structured problem solving and data driven analysis. Required Qualifications Bachelor's degree in biomedical engineering, mechanical engineering, materials science, or a related discipline. Hands-on experience working with ePTFE materials and processes. Strong understanding of materials science principles related to fluoropolymers. Experience in medical device development within an ISO 13485 environment. Ability to design experiments, analyze data, and propose clear next steps. Strong written and verbal communication skills. Preferred Qualifications Experience with vascular, implantable, or catheter based devices. Prior exposure to supplier qualification and raw material specification development. Familiarity with device level risk management activities. Experience leading technical workstreams or mentoring junior engineers.

This is a progression position with the level being based on candidate experience and business needs as an R&D Engineer. You will drive technical programs focused on the development of new flexible packaging products and/or technologies. In this role, you will lead all development and technical activities for assigned projects, delivering new packaging solutions to many of the world's most recognized brands. The ideal candidate will have a strong background in polymer and/or paper science, materials engineering, or packaging technology, and a passion for solving complex technical challenges. What you'll be doing: Lead technical activities to develop new flexible packaging structures, capabilities, or technological advancements. Translate market or customer requirements into specifications and design products that meet these criteria. Develop and lead pilot, production, and filling/packaging trials. Interface with business leaders, customers, and external partners to discuss development activities and needs. Coordinate activities to accomplish tasks using available internal and external resources. Stay current with industry trends, material and process developments, and the competitive landscape to leverage and share that knowledge within the business. Build subject matter expertise for key focus areas and act as a consultant within the business for these areas. Prepare written and verbal presentations, project plans, updates, and reports for internal and external use. Travel to suppliers, customers, and other innovation partners and for conferences, trade shows, or training. Collaborate with sales, marketing, supply management, engineering, sustainability, and other functions to identify needs and solutions. This is an ONSITE position located out of our Charlotte, NC or Chicago, IL (Elk Grove Village) facilities. We'd love to hear from you if: Education: Bachelor of Science, preferably in Engineering, Science, Packaging, or Plastics Experience: 5-10 years in a Product/Package Development or Manufacturing role. Preferred manufacturing processes include blown film production, extrusion coating and laminating, printing (rotogravure/flexographic), pouching, and form/fill/seal conversion. Experience in retort and hot fill applications or the following markets would be a plus: pet food, dairy, coffee, chilled and frozen food, healthcare, or personal care. Material science (OPP, PET, PE, Nylon, paper, and foil) knowledge New product development, packaging applications Project management (multitasking, prioritization, time and budget management, planning and executing) Technical writing & oral communication This is a progression position with the level being based on candidate experience and business needs.

Why Fibreworks Composites? Founded in 2009 by Guenther Steiner and Joe Hofmann, Fibreworks Composites is the largest privately-owned composite manufacturer in the U.S. In 2019, we expanded our capabilities with the launch of Composite Factory, an AS9100 / ISO-certified sister company serving the Aerospace, Aero Structures, Aviation, Defense, and Medical industries-sectors that demand the highest levels of traceability, certification, and quality. Rooted in motorsports, our team thrives in a fast-paced, precision-driven environment. We are fully vertically integrated, bringing engineering, machining, tool-making, and production under one roof to deliver advanced Composite Structures on tight timelines with unmatched quality. If you're looking to be part of a team that pushes boundaries and works with the most advanced technologies in the composites industry, this is where the future is being built! Position Overview : The R&D Engineer role is to advance the envelope of cutting-edge capabilities and aid in internal process development. Responsibilities include leveraging new technologies to innovate manufacturing processes and implement cost-saving strategies. Work closely with cross-functional teams, troubleshoot production challenges, and promote innovation within the organization. Key Responsibilities : Research, develop, and train new processes and technologies to enhance the company capabilities. Identify areas within the business for improvement and design implementation solutions for better operations and efficiency. Stay informed on new technologies, manufacturing methods, materials, etc. Present R&D findings with peers, department leads and business leadership. Interface and develop relationships with vendors for technical support and cost analysis. Produce 3D models and production details as needed and/or work with the design group to facilitate development projects. Manage numerous long-term development projects, keeping organized reports or data for goals, priorities, costs, and rates of return. Develop, document and help to maintain standard operating procedures. Assist with automation efforts in both hardware and software to improve manufacturing processes. Apply engineering principles to design, install, and maintain automated systems, potentially including robotics, sensors, and control systems. Ensure compliance with health, safety, and workplace policies at all times. Perform other duties as assigned to support company goals and initiatives. What You Will Bring to the Team : A Bachelor of Science (BS) degree in Engineering (e.g., Aerospace, Industrial, Mechanical, Electrical, Mechatronics, or a related field) is preferred. Minimum of two years of experience in R&D engineering or related field. Experience with composites, robotics, pneumatics, hydraulics, CNC machining, and control systems (PLC, sensors, etc) is preferred. Proficiency in CAD software with an understanding of tolerances and their impact on composite manufacturing. Strong problem-solving skills with the ability to troubleshoot and optimize manufacturing processes. Excellent written and verbal communication skills for effective collaboration across teams. Proficiency in Microsoft Office software for documentation and data analysis. Strong organizational skills with the ability to manage multiple projects, work under pressure, and meet deadlines. A proactive, solutions-oriented mindset with a commitment to continuous improvement. Must be a U.S. Citizen or Permanent Resident. Our Investment in You: Comprehensive medical, dental, vision, and life insurance benefits. 401(k) matching after 6 months tenure Paid time off (PTO) for vacation and sick days Employee referral program Shift differential for 2nd shift employees Potential to earn quarterly discretionary bonuses based on company performance Discounts on select services/products Climate-controlled work environment Hours of Operation: Normal business hours: 8 am to 5 pm; Monday through Friday, with occasional weekends and holidays as scheduled by leadership. Work Environment & Physical Requirements: Combination of indoor and outdoor activities with varying conditions Requires walking, standing, sitting, climbing, balancing, bending, reaching, handling, stooping, kneeling, and crouching Ability to lift/carry/push/pull up to 50 pounds May involve operating material handling equipment in a safe manner Work may include exposure to variable noise levels, fumes, airborne particles, hazardous chemicals, etc., requiring personal protective equipment Some positions may require working with small parts/components, necessitating excellent hand-eye coordination and manual dexterity Specific vision abilities required, including close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus Fibreworks Composites LLC is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability, genetic information, protected veteran status, or any other characteristic protected by applicable law.

**A Snapshot of your Day:** We're looking for passionate Operations Engineer to join the 5F Product Engineering team in Orlando. As an Operations Engineer, your day centers around operational data analysis, testing preparation, engine testing and resolving technical issues for 5000F product. The operational engineer is the cognizant engineer for Gas Turbine new unit and Modernizations & Upgrade products for SGT6-5000F. The scope of responsibility extends to coordinating support from all other organizations directed towards development, negotiations and implementations for the new unit and Modernizations and Upgrade (M&U) product line. **How You'll Make an Impact** + Testing preparation and field validation including testing at test-bed and customer sites. + Lead and facilitate fast resolution of technical issues of sold GTs. This includes evaluation of a root cause, solution development and implementation followed by verification/validation. + Operational data analysis of new units to identify trends and potential issues + Technical definition of Gas Turbine (GT) Operation Modes (e.g. Load Gradients, Grid-Code, Additional Features, Control System) + Close interaction and alignment with GT Module Engineering, Auxiliary/ controls and BOP. + Creation of related technical documentation + Analysis of related technical risks + Support of offering (Negotiation) process for GT projects with focus on GT operation + Support of COE projects for first time applications + 10-25% travel is expected in support of customer meetings, site walk-downs, vendor support, testing, and product implementation. **What You Bring** + Bachelor's degree or equivalent in Mechanical or Aerospace Engineering from an accredited university/college. Master's degree is a plus. + Minimum 8+ years of successful experience in a gas turbine development environment with extensive understanding of gas turbine design, operational aspects & improvement levers. Advanced degree may be substituted for experience, where applicable. + Strong communications skills, network building, and solid engineering background. Good program management skills is preferred. + Applicants must be legally authorized for employment in the United States without need for current or future employer-sponsored work authorization. Siemens Energy employees with current visa sponsorship may be eligible for internal transfers. **About the Team** **Who is Siemens Energy?** At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: ******************************************** **Rewards** + Career growth and development opportunities + Supportive work culture + Company paid Health and wellness benefits + Paid Time Off and paid holidays + 401K savings plan with company match + Family building benefits + Parental leave ************************************ Equal Employment Opportunity Statement Siemens Energy is an Equal Opportunity and Affirmative Action Employer encouraging diversity in the workplace. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law.

Company: TTI - Trucks, Technology, and Industrial Division *This is a Volvo Group company role located in Kings Mountain, NC* Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport and infrastructure solutions for the future. If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match. What you will do: We are looking for a hands on, self driven Manufacturing Engineer with a strong sense of urgency to support and improve our body in white (BIW) manufacturing processes. In this role, you will work on the shop floor, lead improvement activities, and collaborate closely with operators, technicians, and cross functional teams. Your focus is to help us build safe, high quality products in a cost effective way while driving a culture of continuous improvement and built in quality. We will teach you the technical details and systems you need; what we need from you is ownership, energy, and a willingness to learn. Core Responsibilities: Support and improve BIW manufacturing processes, techniques, equipment, gauging, IT systems, and tooling to reduce defects and improve quality. Spend time on the shop floor to confirm that tooling and fixtures perform to expected quality and safety standards; follow up quickly on any issues. Learn and apply new technologies and systems to improve our assembly line performance. Develop practical, cost effective engineering solutions that can adapt to product and volume changes. Participate in and support project planning, including: Pre studies and feasibility checks. Volume and capacity assessments. Follow up on actions, timing, and results with stakeholders. Use benchmarking and best practices from inside and outside the organization to improve our processes. Listen to and understand the needs of internal and external customers, especially production and quality. Clearly communicate ideas, problems, and solutions in both written and verbal form. Work collaboratively to solve problems, support root cause analysis, and help prevent and de escalate conflicts. Take initiative to identify risks and potential issues early, and act quickly to minimize their impact. Contribute actively to our continuous improvement culture, with a focus on: Waste elimination. Built in quality and error proofing. A safe, clean, and organized working environment. Who are you? You are hands on and enjoy being on the shop floor, close to the product and the people building it. You are self driven, take ownership of your tasks, and follow through without needing constant direction. You have a strong sense of urgency and respond quickly when problems arise. You are a team player who builds collaborative relationships with colleagues across functions and levels. You can make decisions with limited information, influence others when changes are needed, and stay calm under pressure. You communicate clearly and respectfully, making it easy for others to work with you and trust you BS degree in Manufacturing, Mechanical, Industrial Engineering, or equivalent. 3+ years of experience in manufacturing engineering or a similar field (automotive or BIW experience is a plus, but not required). Demonstrated problem solving skills, including risk identification and mitigation, both individually and in teams. Strong time management and prioritization skills. Excellent verbal and written communication skills What's in it for you? Compensation & Benefits We offer a solid package of compensation and benefits, plus you will enjoy: Competitive base salary Annual company bonus Medical, dental, vision, disability, life insurance, and others 401(k) with employer match, plus additional company contribution Generous Employee Time Off, additional company holiday days, community volunteering hours Onsite facilities and activities that make everyday living easier, including a fitness center In addition to the above, you will also enjoy: An inclusive organization that prioritizes employees' health and well-being Volvo Group University for professional and personal development A global organization with expansive career growth opportunities Modern workspaces that allow agility and collaboration Employee discounts and perks Ready for the next move? Are you excited to bring your skills and disruptive ideas to the table? We can't wait to hear from you. Apply today! At the Volvo Group, we strive for a clear, transparent, and straightforward compensation approach, motivating you to contribute to the company's growth. For this position, the base pay is set at $85,000 - $100,000 annually, and where applicable, bonus eligible.  The range for this role, as well as final salary offered, is determined by several factors including, but not limited to, geographic location, work-related knowledge, certifications, skills, education, and experience. In addition to these factors, we believe in the importance of pay equity and consider internal equity of our current team members as part of any final offer. In addition to a solid package of compensation and benefits, plus you will enjoy:   Competitive medical, dental and vision insurance. Generous paid time off. Competitive matching retirement savings plans. Working environment where your safety, health and wellbeing come first. Focus on professional and personal development through Volvo Group University. Programs that make today's challenging reality of combining work and personal life easier. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, disability, or status as a protected veteran. We value your data privacy and therefore do not accept applications via mail. Who we are and what we believe in We are committed to shaping the future landscape of efficient, safe, and sustainable transport solutions. Fulfilling our mission creates countless career opportunities for talents across the group's leading brands and entities. Applying to this job offers you the opportunity to join Volvo Group. Every day, you will be working with some of the sharpest and most creative brains in our field to be able to leave our society in better shape for the next generation. ​We are passionate about what we do, and we thrive on teamwork. ​We are almost 100,000 people united around the world by a culture of care, inclusiveness, and empowerment. Group Trucks Operations encompasses all production of the Group's manufacturing of Volvo, Renault and Mack trucks, as well as engines and transmissions. We also orchestrate the spare parts distribution for Volvo Group's customers globally and design, operate and optimize logistics and supply chains for all brands. We count 30,000 employees at 30 plants and 50 distribution centers across the globe. Our global footprint offers an opportunity for an international career in a state-of-the-art industrial environment, where continuous improvement is the foundation. As our planet is facing great challenges, we - one of the largest industrial organizations in the world - stand at the forefront of innovation. We are ready to rise to the challenge. Would you like to join us?

The Product Development Engineer will design and develop fiber optic connectors, connector components and connector processes. Develop, plan, and coordinate projects and technical aspects of fiber optic connector/ferrule customer requirements through direct involvement with Applications Engineering and Sales. Zemax and optical modeling experience is required. Major Responsibilities: * Design and develop multi-fiber optical connectors. * Develop strategic supplier relationships as appropriate * Plan and coordinate projects for each new product assigned including scheduling of resources and status reports * Maintain a high level of expertise in the following areas: fiber, cable, PCB and TX/RX connectors, connector installation, testing, and troubleshooting. * Prepare all specifications, documents and forms necessary to transfer products to manufacturing, marketing, and sales. * Prepare conference papers on new technology or products. * Provide technical assistance as required by Marketing, Sales, and Manufacturing groups. * Maintain documentation for possible patent submission. * Act as a focal point for all technical issues on fiber, cable, connectors, hardware and system performance for Marketing and Sales Groups. * Propose new product ideas to add to current product line. Key Decision Areas: * Fiber Optics Development Engineer will determine the most cost effective approaches meeting internal and external customer requirements. * Prioritize internal requests. * Recommending best course of action in solving internal and external problems; i.e. project planning. Equipment Used: * Personal Computers * Software packages: MS Excel, MS Word, CAD * Optical test equipment, microscopes, Surface Profiler, Interferometer, environmental chambers, optical fiber termination equipment * Optical modeling and finite element analysis Personnel Directed: Product development staff and will report to the VP of Product Engineering Education and Skill Required: * BS in technical or engineering field * 5 years previous work experience in fiber optic industry or communications systems (This can include cooperative education programs.) * Fundamental working knowledge of computers to include word processing, presentation, and spreadsheet or database programs * CAD * Statistical Analysis * Background in optics and optical modeling and Zemax experience is required. Bottom Line Requirements: 1. BS in technical or engineering field. 2. 5 + years previous work experience in fiber optic industry or communications systems. 3. Experience with CAD and Statistical Analysis. 4. Zemax and optical modeling experience. Additional Information All your information will be kept confidential according to EEO guidelines.

Our development center is entering an exciting phase of growth as we expand our capabilities and take on new strategic initiatives. We're taking on new challenges and building a team that's ready to drive meaningful impact across our organization. It's a great time to join Yokohama and be part of our growing engineering team. Summary The Development Engineer II has mastered the Development Engineer I duties and responsibilities. The Development Engineer II requires knowledge of established engineering principles and methods related to tire design and analysis. They are responsible for all phases of replacement tire development including the design of experiments, testing and analysis of results. Responsibilities Conduct projects for replacement tire lines, product enhancements and line expansions. Perform requirements analysis and implement tire development project plans as required. Create budgets for each project and track expenses. Receive overall project targets and establish specific tire performance targets. Check and approve mold drawings and assure adherence to design standards. Receive overall project targets and establish specific tire performance targets. Check and approve mold drawings and assure adherence to design standards. Create and issue experimental tire specifications. Set up experimental designs utilizing appropriate analytical and statistical methodologies. Work with tire manufacturing groups to build and verify experimental tire builds. Generate test requests, oversee tire testing and summarize test results. Issue development project interim and final reports. Present results to management and other internal departments. Implement development tires and specifications into production. Perform required internal and external certification testing to certify products into production. Participate in regular department meetings. Conduct regular design reviews on assigned projects. Participate on task force teams to increase technical capability and achieve increased performance. Participate on industry groups such as Tire & Rim, RMA, SAE, and ASTM. Knowledge and Skills Effective written and oral communication skills. Strong technical, analytic and problem solving skills. Proficient in the use of engineering software tools such as 3D CAD programs, Matlab, statistical software and Microsoft Office. Education and Experience Bachelor of Science degree in Mechanical Engineering or equivalent. Minimum of 3-5 years' experience in Tire development or Equivalent. Physical Requirements Must be able to remain in a stationary position, often sitting for prolonged periods of time while working on a computer. Ability to repeat motions that include the wrists, hands and/or fingers Occasionally work indoors in a warehouse environment where temperature regulation may be inconsistent, and where there is exposure to noise, and machinery. Employees must possess the ability to regularly lift, carry, push, pull and move materials and objects weighing up to 40 pounds. If you're not ready to apply for a current position, Connect with us to create a profile and receive updates on future job opportunities.

Welcome to our Energy division Ramboll is at the forefront of addressing the green transition and offers a holistic approach to energy that supports the sector on the journey towards more sustainable solutions. With 1,581 experts in 15 countries, covering the full spectrum of technologies and all parts of the value chain, we plan, design, and implement energy solutions all over the world. Ramboll in Americas Ramboll has 2,000 experts working across 72 offices in the Americas applying their passion to deliver innovative solutions within Environment & Health, Water, Energy and Planning & Urban design. Founded in Denmark, Ramboll is a people company. We invite you to contribute to a sustainable future working in an open, collaborative, and empowering culture. Job Description Your New Role Our group's projects include the design of HVAC and utility systems of varying complexity. Project types include, but are not limited to, the following: * Manufacturing (pharmaceuticals, aerospace, food & beverage, chemicals). * Pharmaceutical (ISO class manufacturing spaces, Wet & Dry labs, offices) * Wastewater Treatment (pump stations, screening buildings, chemical treatment buildings, wet/dry wells, industrial wastewater treatment plants) * Commercial (offices, warehouses) * Higher Education (central plants, thermal distribution systems, building level HVAC) Your key tasks and responsibilities will be: * Coordinate with other engineering disciplines to produce final construction drawings and details associated with multidisciplinary engineering projects. * Perform engineering design concept development and calculations on complex and unique mechanical designs including, HVAC, process piping, plumbing, and minor aspects of fire protection and plumbing. * Prepare project drawings and specifications. * Demonstrate a understanding of heating and cooling mechanical systems (chilled water, hydronic hot water, and steam) as well as HVAC systems. * Perform technical reviews and coordination with other trades on the project. * Conducting on-site fieldwork as required to develop a comprehensive package of contract documents (drawings and specifications) * Interface with clients and represent Ramboll by adhering to our values. Qualifications About You * 10+ years of experience * B.S. (or higher) in Mechanical Engineering * Ability to foster a creative engineering environment * Strong communication skills, (both written and verbal) * Ability to work across a wide range of areas within the mechanical engineering discipline * Ability and desire to obtain professional registration (FE and PE) * Strong computer skills in the Microsoft Office suite of programs * Proven experience in Revit MEP preferred * Proficiency in other engineer software proffered; to include HAP, Pipeflow, Caesar, Trane Trace. Personal qualities that will help you succeed in this role include: ability to effectively lead a team, balance scope, schedule, and budgets, proactively plan and execute a project, and the ability to effectively communicate both internally and externally. Additional Information All your information will be kept confidential according to EEO guidelines.

Job Description Position Overview We are seeking a Medical Device Engineer with strong experience in the design and development of complex steerable catheters. This role is intended for candidates at the Engineer II through Senior Engineer level who are comfortable working hands on, driving technical development, and contributing throughout the full product lifecycle. Key Responsibilities Participate in or lead the design and development of complex steerable catheters including deflection systems, pull wire mechanisms, torque transfer structures, and integrated components. Create design concepts, detailed models, drawings, and specifications using 3D CAD tools. Perform design analysis including tolerance studies, mechanical evaluations, and material selection. Build and refine prototype devices through hands on bench work and structured testing. Lead or support design verification activities including DV planning, development of test methods and procedures, and execution of mechanical and simulated use testing. Support the creation of manufacturing processes in collaboration with operations, tooling, and quality teams. Prepare documentation including design history file elements, risk management documents, protocols, and reports. Translate user needs and clinical requirements into clear and actionable design inputs. Contribute to project planning, cross functional communication, and milestone execution. Ensure all work complies with applicable regulatory and quality system requirements. Required Qualifications Bachelor's or master's degree in biomedical engineering, mechanical engineering, or a related field. Three or more years of experience in interventional medical device development, with preference for at least five years of catheter design experience. Hands on experience with steerable or deflectable catheter architectures. Strong understanding of catheter materials including hypotubes, nitinol, polymer shafts, braids, coils, and bonding processes. Proficiency with 3D CAD, preferably SolidWorks. Demonstrated ability to build prototypes, perform mechanical testing, and interpret performance data. Working knowledge of design controls, risk management, ISO 14971, ISO 13485, and 21 CFR 820. Familiarity with relevant device specific standards such as ISO 10555, ISO 11070, ISO 5840, ISO 25539, and others. Strong problem solving skills with clear and concise technical communication. Preferred Qualifications Experience with complex multilumen shaft constructions or devices that incorporate imaging, ablation, or therapeutic components. Background in DFM for catheter assembly including braiding, laser processing, bonding, and thermoforming. Experience developing devices for structural heart or aortic applications.