Research and development engineer jobs in Palm Harbor, FL - 414 jobs

Senior Project Engineer - Heavy Civil Construction Responsibilities Review contracts, plans, and specs in full Support the Project Manager and Superintendent with daily operations Assist with schedules, cost tracking, forecasting, and quantity reporting Solicit pricing from subcontractors and vendors, including change orders Coordinate materials, equipment, subcontractors, and field crews Support billing, cash flow projections, and change order processing Manage project documentation, submittals, permits (NPDES/SWPPP), and record drawings Review daily field reports for accuracy Assist with inspections, testing, utility coordination, and project closeout Handle additional tasks as assigned by the Project Manager Requirements BS in Civil Engineering (Construction Engineering & Management preferred) 5-8 years of heavy civil construction experience (field and/or office) Strong written and verbal communication skills Proficient in Excel, Word, and Primavera P6

Manufacturing Process Engineer - Electronics / CCA Production Clearance Requirements: None Contract to Hire Pay Rate:$35/hr We are seeking a hands-on Manufacturing Process Engineer to support the design, optimization, and continuous improvement of manufacturing processes for circuit card assemblies (CCA), electronic module builds, and cable harness production. This role involves collaborating with engineering, operations, quality, and production teams to enhance manufacturability, improve workflow efficiency, develop tooling, and ensure compliance with specifications and regulations. The ideal candidate understands electronic manufacturing processes, can interpret engineering drawings, and has experience designing production layouts or writing process documentation. This is an excellent opportunity for a technical professional who enjoys supporting the production floor, driving improvements, and delivering high?quality manufacturing solutions. Responsibilities: Design and improve manufacturing processes, procedures, and production layouts for CCAs, electronic modules, and subassemblies. Review and interpret engineering prints to develop accurate and efficient manufacturing processes. Collaborate with design engineering to drive production improvements and optimize manufacturability. Support day?to?day production floor activities in partnership with operations and quality teams. Design, procure, and implement tooling, fixtures, and manufacturing aids to support efficient assembly processes. Incorporate inspection and test requirements into production plans where applicable. Monitor performance of machinery, equipment, and tools; investigate deficiencies and recommend corrective actions. Ensure compliance with manufacturing standards, specifications, and regulatory requirements. Provide feedback to engineering regarding design concepts and specification improvements. Drive continuous improvement initiatives focusing on quality, throughput, and process efficiency. Perform physical tasks including climbing stairs and lifting up to 20 lbs. Shift Schedule: Monday - Thursday, 5:00 AM to 3:30 PM EST Required Skills/Education: Experience designing or improving manufacturing processes for circuit card assemblies (CCA) or electronic modules. Ability to read, interpret, and apply engineering drawings, schematics, and technical documentation. Hands-on experience supporting production floor operations and resolving process issues. Ability to design or modify tooling, fixtures, and assembly processes. Strong understanding of manufacturing standards, quality requirements, and compliance processes. Ability to read/write in English. Ability to climb stairs and lift up to 20 lbs. Preferred Skills: Cable harness experience (routing, assembly, documentation). Experience writing or updating manufacturing process documentation. Familiarity with CCA assembly processes including soldering, inspection, reflow, or AOI. Experience working in electronics manufacturing or defense/aerospace environments. Strong continuous improvement mindset with the ability to identify process gaps and drive solutions. About Seneca Resources At Seneca Resources, we are more than just a staffing and consulting firm-we are a trusted career partner. With offices across the U.S. and clients ranging from Fortune 500 enterprises to government organizations, we connect talented professionals with meaningful work that drives impact. When you work with Seneca, you're choosing a company that invests in your success, celebrates your achievements, and provides opportunities aligned with your career goals. Our consultants and contractors enjoy competitive pay, comprehensive health, dental, and vision coverage, 401(k) plans, and continuous support from a dedicated team committed to your professional growth. Seneca Resources is proud to be an Equal Opportunity Employer, fostering a diverse and inclusive workplace where all qualified individuals are encouraged to apply.

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. We are seeking a candidate with 1-5 years of experience to join a multi-disciplinary team in our Orlando office. This role will primarily focus on plumbing design as well as other mechanical design tasks. We offer full service in-house architecture/engineering design capabilities and typically work on a diverse array of projects. This is a unique opportunity to work alongside architects and other engineers across a multitude of project types (theme parks, airports, college campuses, laboratories, and others). Duties and responsibilities: Works in the responsible charge of a licensed professional engineer Performs plumbing engineering calculations, edits specifications, and prepares design drawings Assists in developing project construction documents, including conducting site visits, producing specifications, developing drawings, sizing equipment and producing cost estimates. Coordinates with the other design disciplines in the delivery of mechanical designs Performs services during construction including responding to RFI's, reviewing submittals, and performing field observations Qualifications 1-5 years of related mechanical/plumbing design Bachelor's degree in mechanical engineering OR Certified Plumbing Designer Understanding of design and construction documents. Proficiency in REVIT. Knowledge of building codes. Self-starter with a proactive attitude Ability to prioritize tasks and meet deadlines Estimated Compensation Range and Benefits $80,000 - $90,000/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Are you the 𝗕𝗲𝘀𝘁 𝗼𝗳 𝘁𝗵𝗲 𝗕𝗲𝘀𝘁? An innovator? A problem solver? If so, CONMED has a great opportunity to join a talented team of experienced R&D Engineers. As a Mechanical Engineer II R&D, you will apply intensive and diversified knowledge of engineering principles and practices to a broad area of design assignments. While working under the general supervision of an engineering manager, you'll have significant freedom to drive projects independently. A degree of creativity and latitude is encouraged and expected. You should be familiar with a variety of mechanical engineering design principles and practices, as well as design controls for engineering changes. Duties & Responsibilities: Demonstrated mechanical design experience (CAD, tolerance stack ups, GD&T) Ability to plan, conduct and supervise engineering assignments involving several smaller or lower priority projects or one major project. Works with cross-functional teams and under minimal supervision of an engineer manager or supervisor; has some latitude for un-reviewed action. Writes and advise others of the testing requirements. Creates and check design specifications. Conducts root-cause investigation and recommend corrective action for design issues in existing products Effectively communicates relevant project information to superiors. Schedules work to meet completion dates and technical specifications. Translate or develop engineering specifications based on voice of the customer input. Consistently acknowledges and appreciates each team member's contributions. Motivates team to work together in the most efficient manner. Qualifications: Bachelor of Science degree in Mechanical Engineering. 2 years of experience in R&D engineering. Strongly Preferred: Prior medical device experience. Demonstrated mechanical design experience (CAD, tolerance stack ups, GD&T) Expected Travel 0-20% This position is not eligible for employer-visa sponsorship This job posting is anticipated to close on February 6, 2026. We may, however, extend this time period, in which case the posting will remain available on careers.conmed.com. Please submit your application as soon as possible as we will be reviewing applications on a rolling basis as we receive them. Benefits: CONMED offers a wide array of benefits to fit your unique needs. Visit our Benefits Page for more information. Competitive compensation Excellent healthcare including medical, dental, vision and prescription coverage Short & long term disability plus life insurance -- cost paid fully by CONMED Retirement Savings Plan (401K) -- CONMED matches your contributions dollar for dollar, with the potential for up to 7% per pay period Employee Stock Purchase Plan -- allows stock purchases at discounted price Tuition assistance for undergraduate and graduate level courses Know someone at CONMED? Have them submit you as a referral before applying for this position to be eligible for our Employee Referral Program incentives! CONMED is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Protected veterans and individuals with disabilities are encouraged to apply. The Know Your Rights: Workplace Discrimination is Illegal Poster reaffirms this commitment. Colorado Residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information. If you feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact us at ************ option #5.

General Description JOIN OUR TEAM AS AN ENGINEER III! The Engineer III role involves highly complex and specialized engineering work. Duties include planning, coordinating, and reviewing the work of technical engineering applications submitted by the consulting engineers engaged in the design and permitting of development plans. Also assist in the development and review of the laws and practices relating to the National Flood Insurance Program and the continued participation in the Community Rating System. Essential Job Functions Provides technical review of engineering design consultant's design, plans, and specifications for site development projects and prepares review comments. Conducts specialized engineering analysis of complex stormwater management systems. Assists in the development and administration criteria of the drainage studies as they pertain to rezoning, site development, and other developments as needed. Assists in the preparation of in-house criteria and ordinances as they relate to drainage and flood issues. Prepares project status reports and schedules as required. Makes engineering investigations and prepares reports on findings. Assists in the development, training and administration of the Pasco County Flood Damage Protection Program and Community Rating System including interface with FEMA to ensure continued compliance with programs. Assists in the preparation of applications for the Hazard Mitigation Grant Program, Pre-Disaster Mitigation and Flood Mitigation Assistance Program, which include conducting Benefit-Cost Analysis and submittal via eGrant. Monitor and manage contracts and projects, which are primarily for the elevation or acquisition of structures. Performs related work as required. Knowledge, Skills and Abilities * Knowledge of the principles and practices of civil engineering. * Knowledge of modern engineering procedures and techniques as they apply to public works, drainage, and utilities. * Knowledge of modern developments, current literature and sources of information in the area of public works, drainage, and utilities engineering. * Knowledge of the overall FEMA flood program from map development, determinations, Letters of Map Amendment and Letters of Map Revision and flood studies, construction techniques and requirements. * Ability to give technical and professional review to a wide variety and large volume of engineering plans, specifications, and related documents. * Ability to present clear and concise reports, orally and in writing. * Working knowledge of Florida Department of Transportation (FDOT) standard specifications and indexes, Southwest Florida Water Management District (SWFWMD) rules, Florida Department of Environmental Protection (F.D.E.P.) rules, Federal Emergency Management Agency (FEMA) and the Army Corps of Engineers (A.C.O.E.) rules. * Ability to read and interpret complex engineering plans and specifications. * Ability to meet and work with the public, contractors, FDOT and SWFWMD personnel, make presentations, and reply to complaints. Minimum Requirements PHYSICAL SKILLS: Ability to communicate effectively using verbal, written and visual communication. EDUCATION, TRAINING AND EXPERIENCE: Graduation from an accredited college or university with a Bachelor's Degree in Civil Engineering. Five (5) years' of experience in the field of civil engineering in development, roads, bridges, or drainage projects. Three (3) years of engineering experience as a Professional Engineer required.Experience working with regulatory rules, standards, specifications, and processes preferred. LICENSES, CERTIFICATIONS OR REGISTRATIONS: Must possess a valid Florida Driver's License. Registration as a Professional Engineer. Certification as a Floodplain Manager preferred. Applicants that are not registered as a Professional Engineer may apply but would be considered for a Technical Specialist III position at $68,106.00 - $102,159.00 Annually (D.O.Q.). If hired, must have the ability to obtain registration as a Professional Engineer within one (1) year from the date of hire. ADA STATEMENT: A qualified employee or applicant with a disability may be afforded a reasonable accommodation to perform the essential job functions of a position in compliance with the Americans with Disabilities Act. DRUG-FREE WORKPLACE: Pasco County BOCC is a drug-free workplace in accordance with Federal and Florida law. EMERGENCY RESPONSE/RECOVERY ACTIVITIES: All employees will be required to work before, during, or after an emergency. During an emergency, employees may temporarily be assigned to work and perform duties outside the normal scope of their position, location and work schedule to fit the needs of the County and its citizens. VETERANS' PREFERENCE: Under Section 295.07, F.S., Chapter SSA-7, Pasco County BCC provides to Veterans, that preference in appointment will be given to preference-eligible applicants. PASCO COUNTY WAS VOTED ONE OF THE NATION'S TOP WORKPLACES FOR 2021 Benefits include: * Florida Retirement System (FRS) retirement plan * PTO (Paid Time Off) * Paid holidays * Group insurance * Tuition reimbursement * Deferred compensation * Medical leave pool * Annual medical leave buy-back * Mid-management/Professional grade, and management personnel may receive 40 hours of admin leave per calendar year. Effective July 1, 2011, FRS members must contribute 3% of their salary as retirement contributions, on a pre-tax basis (the salary is reduced by the amount of the employee contribution before determining the federal income tax deduction). The employer will automatically deduct the employee contributions.

Principal Mechanical Engineer to lead building system design of HVAC, Plumbing and Fire Protection systems. This is a leadership position to establish the mechanical team for a growing healthcare focused MEP firm with a quick path to equity. Job Description Responsibilities: Establish an HVAC, Plumbing & Fire Protection team. Manage and mentor junior engineers. Develop technical deliverables; including construction plans & specifications. Coordinate with clients on project requirements and status updates. Coordinate with regulatory agencies to understand local permitting requirements and submit permit documents for review and approval. Perform construction administration duties; including attending and documenting project meetings, conducting site visits, reviewing shop drawings, and assisting with the development of change order, closeout, and other construction documentation. Perform onsite construction observation and inspection. Required Qualifications: Bachelor's degree in mechanical engineering from an ABET-accredited program. 8+ years of related experience P.E. License Revit experience. Strong written and oral communication skills with both internal employees and external clients. Self motivated Preferred Qualifications: AHCA Experience Healthcare experience Additional Information All your information will be kept confidential according to EEO guidelines.

Principal Mechanical Engineer to lead building system design of HVAC, Plumbing and Fire Protection systems. This is a leadership position to establish the mechanical team for a growing healthcare focused MEP firm with a quick path to equity. Job Description Responsibilities: Establish an HVAC, Plumbing & Fire Protection team. Manage and mentor junior engineers. Develop technical deliverables; including construction plans & specifications. Coordinate with clients on project requirements and status updates. Coordinate with regulatory agencies to understand local permitting requirements and submit permit documents for review and approval. Perform construction administration duties; including attending and documenting project meetings, conducting site visits, reviewing shop drawings, and assisting with the development of change order, closeout, and other construction documentation. Perform onsite construction observation and inspection. Required Qualifications: Bachelor's degree in mechanical engineering from an ABET-accredited program. 8+ years of related experience P.E. License Revit experience. Strong written and oral communication skills with both internal employees and external clients. Self motivated Preferred Qualifications: AHCA Experience Healthcare experience Additional Information All your information will be kept confidential according to EEO guidelines.

Join our team at Core One! Our mission is to be at the forefront of devising analytical, operational and technical solutions to our Nation's most complex national security challenges. In order to achieve our mission, Core One values people first! We are committed to recruiting, nurturing, and retaining top talent! We offer a competitive total compensation package that sets us apart from our competition. Core One is a team-oriented, dynamic, and growing company that values exceptional performance! * This position requires an active TS/SCI clearance.* Responsibilities: * Applies their expertise and knowledge to technical projects, finding innovative, cost-effective means to improve research, techniques, procedures, and/or products and technologies. * Provides research engineering, technical, and managerial direction for problem definition, analysis, requirement development and implementation for complex systems in the engineering discipline. * Responsibilities include developing, conducting and evaluating new approaches to meet technical requirements faster and more efficiently. * Makes recommendations and advises on research development, improvements, optimization, or support efforts. * Performs risk assessments and innovative use of new research concepts or improved techniques and procedures. Requirements: * Bachelor's Degree * 5-10 years of applicable experience in a USCENTCOM Research Engineering role * Technical knowledge of research application analysis and programming * Experience devising procedures to solve complex defense systems capacity and limitations problems Security Clearance: * Active TS/SCI clearance is required Core One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

We are seeking a sharp, driven, on\-site Manufacturing Engineer to develop SOPs, work instructions and process documentation. This role is for a someone determined to make an impact to our business and learn in a hands\-on capacity with a strategic aerospace company. If you are a self\-starter with a hunger for success and troubleshooting, this is your chance to shine! Requirements Key Responsibilities: SOPs: creating and developing for manufacturing processes to standardize operations Work Instructions: developing clear, step by step instructions for operators and technicians Process Documentation: document the sequence of operations, workflows and interactions between different stages of production Who You Are: College graduate with an Engineering degree Manufacturing experience in a team environment for at least one or more years Must be able to work with ITAR products and related data without restriction "}}],"is Mobile":false,"iframe":"true","job Type":"Contract","apply Name":"Apply Now","zsoid":"689506860","FontFamily":"Verdana, Geneva, sans\-serif","job OtherDetails":[{"field Label":"Industry","uitype":2,"value":"Airline \- Aviation"},{"field Label":"City","uitype":1,"value":"Clearwater"},{"field Label":"State\/Province","uitype":1,"value":"Florida"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"33765"}],"header Name":"Manufacturing Engineer","widget Id":"5**********0072311","is JobBoard":"false","user Id":"5**********0751003","attach Arr":[],"custom Template":"3","is CandidateLoginEnabled":false,"job Id":"5**********8786053","FontSize":"12","location":"Clearwater","embedsource":"CareerSite","indeed CallBackUrl":"https:\/\/recruit.zoho.com\/recruit\/JBApplyAuth.do","logo Id":"951ctcdc443cbcd1e43439238ec196e13f682"}

Validation & Engineering Group, Inc. is a leading services supplier who provides solutions for the Pharmaceutical, Biotechnology, Chemical, and Medical Devices industries in the following areas: Laboratory, Compliance, Computer, Engineering, Project Management, Validation, among other services in Puerto Rico and USA. Job Description The Molding Engineer is responsible to support the injection molding, tooling engineering, preventive maintenance, mold testing and evaluation, and project management areas. Review, developed and execute procedures to reduce cycle time, improved part quality and dimensional capabilities, mold condition, evaluation and tooling succession plan, dimensional and tolerance analysis, and spare parts analysis. Support and assist clients projects timelines among other responsibilities of the engineering department. Qualifications Bachelor degree in Engineering with 3 to 7 seven years of experiences in medical device industries, injection molding procedures (Micro, Bulk), Thermo, Mixing, Welding, Calibration and Preventive Maintenance. Experience in engineering assessments. Felicities & Utilities. Molding Strategies Equipment, Machines & instruments. Fully Bilingual (Spanish & English) Willing to work non-standard shifts, weekends, and holidays. Excellent technical writing Skills. Leadership and project management skills. Additional Information Positions available for Puerto Rico. Validation & Engineering Group, Inc is an Equal Employment Opportunity employer.

Manufacturing Process Engineer - Electronics / CCA Production Clearance Requirements: None Contract to Hire Pay Rate:$35/hr We are seeking a hands-on Manufacturing Process Engineer to support the design, optimization, and continuous improvement of manufacturing processes for circuit card assemblies (CCA), electronic module builds, and cable harness production. This role involves collaborating with engineering, operations, quality, and production teams to enhance manufacturability, improve workflow efficiency, develop tooling, and ensure compliance with specifications and regulations. The ideal candidate understands electronic manufacturing processes, can interpret engineering drawings, and has experience designing production layouts or writing process documentation. This is an excellent opportunity for a technical professional who enjoys supporting the production floor, driving improvements, and delivering high?quality manufacturing solutions. Responsibilities: Design and improve manufacturing processes, procedures, and production layouts for CCAs, electronic modules, and subassemblies. Review and interpret engineering prints to develop accurate and efficient manufacturing processes. Collaborate with design engineering to drive production improvements and optimize manufacturability. Support day?to?day production floor activities in partnership with operations and quality teams. Design, procure, and implement tooling, fixtures, and manufacturing aids to support efficient assembly processes. Incorporate inspection and test requirements into production plans where applicable. Monitor performance of machinery, equipment, and tools; investigate deficiencies and recommend corrective actions. Ensure compliance with manufacturing standards, specifications, and regulatory requirements. Provide feedback to engineering regarding design concepts and specification improvements. Drive continuous improvement initiatives focusing on quality, throughput, and process efficiency. Perform physical tasks including climbing stairs and lifting up to 20 lbs. Shift Schedule: Monday - Thursday, 5:00 AM to 3:30 PM EST Required Skills/Education: Experience designing or improving manufacturing processes for circuit card assemblies (CCA) or electronic modules. Ability to read, interpret, and apply engineering drawings, schematics, and technical documentation. Hands-on experience supporting production floor operations and resolving process issues. Ability to design or modify tooling, fixtures, and assembly processes. Strong understanding of manufacturing standards, quality requirements, and compliance processes. Ability to read/write in English. Ability to climb stairs and lift up to 20 lbs. Preferred Skills: Cable harness experience (routing, assembly, documentation). Experience writing or updating manufacturing process documentation. Familiarity with CCA assembly processes including soldering, inspection, reflow, or AOI. Experience working in electronics manufacturing or defense/aerospace environments. Strong continuous improvement mindset with the ability to identify process gaps and drive solutions. About Seneca Resources At Seneca Resources, we are more than just a staffing and consulting firm-we are a trusted career partner. With offices across the U.S. and clients ranging from Fortune 500 enterprises to government organizations, we connect talented professionals with meaningful work that drives impact. When you work with Seneca, you're choosing a company that invests in your success, celebrates your achievements, and provides opportunities aligned with your career goals. Our consultants and contractors enjoy competitive pay, comprehensive health, dental, and vision coverage, 401(k) plans, and continuous support from a dedicated team committed to your professional growth. Seneca Resources is proud to be an Equal Opportunity Employer, fostering a diverse and inclusive workplace where all qualified individuals are encouraged to apply.

JOB TITLE: (P) Manufacturing Engineer PAY RATE: Up to $43/hour We are a national aerospace and defense staffing agency seeking highly qualified candidates for a position with a top-tier client. Job Details: Job Type: Contract (12 months with potential for extension) Shift: Monday-Thursday, 3:30 PM - 2:00 AM EST Industry: Aerospace / Defense / Aviation Benefits: Medical, dental, and vision (Cigna) Perks: Bonus potential + Priority access via Tier 1 supplier Openings Nationwide: Thousands of opportunities across the U.S. Qualifying Questions: Are you a U.S. person as defined under ITAR regulations? Do you meet the educational and experience requirements for this role? Can you commute to the job location or relocate if necessary? Summary: Designs manufacturing processes, procedures, and production layouts for cable harness assemblies and subassemblies. Interprets engineering drawings to develop and optimize processes and collaborates with design engineering to improve manufacturability. Supports the production floor by partnering with operations to drive continuous improvement. Designs, procures, and implements tooling to support manufacturing processes and may incorporate inspection and test requirements into production planning. Monitors equipment and tool performance, investigates deficiencies, and initiates corrective actions to ensure product quality and process efficiency. Provides input to engineering on design concepts and specifications to optimize manufacturing methods. Ensures all processes and procedures comply with applicable regulations and specifications. Requirements: Bachelor's degree in Manufacturing, Mechanical, Industrial Engineering, or a related discipline Must understand cable assembly processes Must be able to read and write in English Must be a U.S. Person (as defined by ITAR). About Us: The Structures Company is a premier national aerospace and defense staffing agency specializing in contract, contract-to-hire, and direct hire placements. We deliver expert workforce solutions across engineering, IT, production, maintenance, and support roles. As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. Eligibility Requirements: Must be a U.S. Citizen, lawful permanent resident, or protected individual under 8 U.S.C. 1324b(a)(3) to comply with ITAR regulations. Keywords: aerospace, aviation, engineering, maintenance, aircraft design, defense Take your career to new heights-apply today!

Product Engineers (St. Petersburg, FL) - Conduct IQ\/OQ\/PQ validation of machinery to enhance quality control and ensure regulatory compliance; Develop assembly procedures and review mechanical manufacturing processes to meet quality assurance standards and ensure dimensional accuracy of medical devices; Perform product evaluation using Advanced CAD\/CAM, SolidWorks, and statistical analysis; Conduct Finite Element Analysis (FEA) using 2D\/3D simulations to assess mechanical performance and stress tolerances; Define critical, major, and minor characteristics for assemblies and parts to ensure compliance with quality assurance provisions; Conduct internal audits and develop technical guidelines to meet ISO Standards and support annual audits; Evaluate non\-conforming parts for compliance with engineering standards and determine whether modification or rejection is necessary; Develop and implement quality assurance programs including engineering materials performance; Conduct CAPA investigations and collaborate with cross\-functional teams to enhance product quality and process reliability, applying principles of Kinematics and dynamics of machinery; Monitor gauge calibration and creation, ensuring measurement precision and adherence to GD&T standards; Establish calibration procedures for inspection instruments. Must have a Bachelor's Degree in Mechanical Engineering or Biomedical Engineering plus skills and knowledge of Advanced CAD\/CAM, Solid\-works, Material Performance, FEA, Statistical Analysis, Kinematics and dynamics of machinery, mechanical manufacturing processes. Job location: St. Petersburg, FL. Submit résumé referencing job code HAL003 to HR, SS White Tech, 8300 Sheen Dr, St Petersburg, FL 33709 "}}],"is Mobile":false,"iframe":"true","job Type":"Full time","apply Name":"Apply Now","zsoid":"636310722","FontFamily":"PuviRegular","job OtherDetails":[{"field Label":"Industry","uitype":2,"value":"Manufacturing\/Engineering"},{"field Label":"City","uitype":1,"value":"Saint Petersburg"},{"field Label":"State\/Province","uitype":1,"value":"Florida"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"33709"}],"header Name":"Product Engineers","widget Id":"3**********0072311","is JobBoard":"false","user Id":"3**********9763001","attach Arr":[],"custom Template":"3","is CandidateLoginEnabled":false,"job Id":"3**********3780001","FontSize":"15","google IndexUrl":"https:\/\/sswhite.zohorecruit.com\/recruit\/ViewJob.na?digest=ACu7IOG96Qd7lCxo.3r8hdHku2ZLmhZZf1IfgKcvSjI\-&embedsource=Google","location":"Saint Petersburg","embedsource":"CareerSite","indeed CallBackUrl":"https:\/\/recruit.zoho.com\/recruit\/JBApplyAuth.do"}

Join our team at Core One! Our mission is to be at the forefront of devising analytical, operational and technical solutions to our Nation's most complex national security challenges. In order to achieve our mission, Core One values people first! We are committed to recruiting, nurturing, and retaining top talent! We offer a competitive total compensation package that sets us apart from our competition. Core One is a team-oriented, dynamic, and growing company that values exceptional performance! *This position requires an active TS/SCI clearance.* Responsibilities: Applies their expertise and knowledge to technical projects, finding innovative, cost-effective means to improve research, techniques, procedures, and/or products and technologies. Provides research engineering, technical, and managerial direction for problem definition, analysis, requirement development and implementation for complex systems in the engineering discipline. Responsibilities include developing, conducting and evaluating new approaches to meet technical requirements faster and more efficiently. Makes recommendations and advises on research development, improvements, optimization, or support efforts. Performs risk assessments and innovative use of new research concepts or improved techniques and procedures. Requirements: Bachelor's Degree 5-10 years of applicable experience in a USCENTCOM Research Engineering role Technical knowledge of research application analysis and programming Experience devising procedures to solve complex defense systems capacity and limitations problems Security Clearance: Active TS/SCI clearance is required Core One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

* Based on requirements from customer orders, plan sequences of operations for fabrication and assembly of products. * Ensure efficient and effective manufacturing methods are used that are compatible to available machines. * Specifies, design and/or procures special tooling or equipment required to attain product per customer requirement with in budgeted cost and time. * Programs CNC machines to effectively and efficiently produce desired product. * Participate in the Company's Corrective Action and MRB Boards. * Analyze and resolve fabrication and tooling issues to avoid problems. * Create new or modify existing manufacturing drawings using CAD methodology. * Value engineer existing products and processes to reduce cost, lead time and cycle times. * Complies with all company policies/procedures. * Complies with all military and contractual requirements. Qualifications * CAD/CAM software use * Solid analytical skills and solution-driven thinking; collects and researches data; uses intuition and experience to complement data. Makes good decisions based upon a mixture of analysis, wisdom, experience and judgment. * Identifies and resolves problems in a timely manner; develops alternative solutions; works well in a group problem solving situations; presents ideas and information in a manner that gets others' attention; displays willingness to make decisions; exhibits sound and accurate judgment; supports and explains reasoning for decisions includes appropriate people in decision-making process. * Displays original thinking and creativity; Meets challenges with resourcefulness; Generates suggestions for improving work. * Learns quickly when facing new problems; a relentless and versatile learner; open to change; strives for continuous improvement of self and processes. * Enjoys working hard; is action oriented and full of energy; enjoys challenges; drives for results. Versatility, flexibility and a wiliness to work within constantly changing priorities with enthusiasm. * Excellent communication (oral and written) and interpersonal skills with the ability to convey information and ideas in a variety of media, tactful, confident, at all levels, internal and external. * Passion for data, analysis, trends, reporting and technology. Ability to read and interpret documents. Ability to write clearly and informatively routine reports, correspondence, and designs work flows and procedures. Presents numerical data effectively. * Demonstrated aptitude for process improvement and use of Lean and Six-Sigma resources and tools. * Thorough knowledge of Word, Excel, Power Point, Visio, Project, Solidworks, CATIA and other applicable tools. Education * Bachelor of Science Degree in Engineering (Mechanical or Industrial) with 2+ years' experience, or 10 years' of equivalent experience considered TES offers an extremely competitive compensation package that includes; major medical, vision, dental, life insurance, long-term disability insurance, vacation, holiday and 401K with company match. Interested? send your resume and cover letter to ****************** Thinkpath Engineering Services (TES) has been a global leader in Engineering and Design Services since 1977. Headquartered in Miamisburg, OH, TES has additional offices in Columbus, IN; Tampa, FL; Marietta, GA; and Toronto, ON. TES provides the following engineering services: * Engineering Design and Drafting Services: Conceptual design, analysis, layout, form/fit and function analysis, drafting (including Geometric Dimensioning and Tolerancing), Technical Data Packages (TDP) development as well as reverse engineering services * CAD Services: Includes parametric modeling, detailing, incorporation of ECNs into existing designs, BOM development, and conversion services between various CAD packages. * Technical Documentation: TES technical documentation team has the ability to author documents, incorporate engineering changes into existing documents, create illustrations and produce animations. * Contract and Direct Placement: Technical placement of engineers, designers, drafters, as well as additional technical professionals in various industries.

Are you ready to see your future take flight? At GE Aerospace, we believe the world works better when it flies. We are a world-leading provider of jet engines, components, and integrated systems for commercial and military aircraft. We have a relentless dedication to the future of safe and more sustainable flight and believe in our talented people to make it happen. Job Description Job Summary Help invent the future of flight, lift people up, and bring them home safely as a GE Aerospace intern! The Manufacturing Engineering internship offers a distinct role based on your major and field of interest: Manufacturing Engineering Internship: In this role you will build a strong technical foundation in manufacturing and assembly processes. This may include key manufacturing, new product integration, new technology integration, continuous improvement, and cost out. This internship is a great first step for those interested in our MEDP or OMLP program after graduation. Essential Responsibilities Our Manufacturing and Supply Chain organizations combine passionate people, cutting-edge technology, and a culture of continuous improvement to provide the highest quality products to our customers. Members of our team are part of a fast-paced and dynamic environment. They typically have the benefit of getting hands-on experience with our products. In either internship experience, you'll be expected to: * Learn and understand state-of-the-art methods of manufacturing, * Support manufacturing and repair processes for component hardware and/or overall engine assembly, * Maintain high-quality standards via risk assessment, root cause analysis, corrective action, and the application of statistical controls * Ensure safe work conditions via Environmental, Health & Safety (EHS) initiatives * Learn and apply Lean and Six Sigma principles to drive productivity, on-time delivery, process capability, and stable operations in our increasingly complex and demanding environment * Supporting delivery efforts for sourced components by working with our shops and suppliers while building project management skills, negotiation skills, and business acumen Qualifications/Requirements: * Minimum 3.0 cumulative G.P.A. on a 4.0 scale without rounding * Attending a full-time registered and nationally accredited bachelor or graduate program (accepted majors are listed below) * Willingness and ability to work in any of the 35+ GE Aerospace U.S. locations * Reliable transportation, as many of our sites do not have public transportation available Degrees accepted: * Aeronautical/Aerospace Engineering * Ceramic Engineering * Chemical Engineering * Civil Engineering * Computer Engineering * Computer Science * Electrical Engineering / Electrical & Computer Engineering * Engineering Technology (various) * Fiber/Polymer Science * Industrial Engineering * Manufacturing Engineering * Materials Science/Engineering * Mechanical Engineering * Systems Engineering * Welding Engineering Or any relevant or similar major to the ones above Eligibility Requirements: Any offer of employment is conditioned upon the successful completion of a background investigation and drug screen. Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening. Desired characteristics: * Humble: respectful, receptive, agile, eager to learn * Transparent: shares critical information, speaks with honesty, contributes constructively * Focused: quick learner, strategically prioritizes work, committed, and takes initiative * Leadership ability: strong communicator, decision-maker, collaborative teamwork * Problem solver: analytical-minded, challenges existing processes, critical thinker * Comfortable working in a fast-paced shop floor environment around various machine tools and equipment * Preference will be given to those with prior internship, co-op or military experience in manufacturing/supply chain or engineering * Demonstrated commitment to community and/or university involvement Benefits: Pay rates for this position begin at $20/hour and increase for each undergraduate year completed. Relocation support and housing assistance is available for those who relocate to a new city. Equal Opportunity Employer: GE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

CROWN Cork & Seal USA, Inc., a wholly owned company of Crown Holdings, Inc. is a global leader in the design, manufacture and sale of packaging products for consumer goods. At Crown, we are passionate about helping our customers build their brands and connect with consumers around the world. We do this by delivering innovative packaging that offers significant value for brand owners, retailers and consumers alike. With operations in 39 countries employing approximately 25,000 people and net sales of approximately $12 billion, we are uniquely positioned to bring best practices in quality and manufacturing to our customers to drive their businesses locally and globally. Sustaining a leadership position requires us to build a team of highly talented, dedicated and driven individuals. Division: Crown's Food Division is a premier manufacturer of food cans and ends. Our complete array of food packaging serves a variety of markets, including fruit, vegetables, dairy, fish, meat, ready meals, pet food, infant milk powder and other dry food products. We offer a wide selection of food cans from round to bowl as well as shaped cans. We truly focus on excellence. Here is your chance to join the Crown Food Business Unit. Location: Ideal candidate will reside near a major airport in the Midwest and/or Eastern Region of the US as this position will require up to 70% regular travel to the Plant locations. Position Overview: The Manufacturing Engineering (with an Electrical Engineering emphasis) will support eight (8) facilities of the North American Food Division manufacturing operations. This position will work closely with the manufacturing facilities in regard to electrical programming, problem solving, etc. for both the 3-Piece and 2-Piece steel and aluminum food cans and end processes. Duties And Responsibilities: Reporting directly to the Sr Manager Production Engineering (Electrical) duties would include but not be limited to the following: Providing problem-solving on electrical technical matters relating to food can and end performance Developing full documentation package of new and existing installations Continued support of new installations and plants until production efficiencies and goals are met Support plants and personnel as required to identify production problems or issues, identify viable solutions and implement the same Develop job completion schedules and monitor their progress Guide, support and train plant electrical teams Qualifications: In addition to the specific responsibilities listed above, the ideal candidate will possess the following: Minimum Requirements BS degree in Electrical or Electronics Engineering or a related discipline 5+ years in a packaging manufacturing environment, food production or a similar industry. Strong technical knowledge demonstrating broad understanding of electrical power and controls design and installation Demonstrated experience in PLC logic programming, documentation, and troubleshooting control programs (Allen Bradley, Siemens, Modicon, etc.) Experience with facilities power distribution (including voltages to 600v & three phase) and control systems and subsystems Power transmission equipment such as gearboxes, drive trains, conveying equipment, etc. Proven record of delivering engineering outputs to achieve scheduled targets Effective communication skills are needed for this role, both verbal and written as well as the ability to interact with employees at all levels of the organization. Self-motivated and eager to take the initiative; with the ability to work effectively in a team setting and as an individual Well organized and detail oriented with good time management skills Strong PC skills are a must, especially using Word, Outlook, and Excel. Committed to on-going personal development and career growth Preferred Requirements Steel and/or aluminum manufacturing environment experience would be ideal A certification in Six Sigma and/or Lean Manufacturing would be a plus Physical Requirements While performing the duties of this job, the associate is regularly required to sit, stand, walk, use hands, reach with hands and arms, and may be required to balance, stoop, kneel, crouch, or crawl The associate may lift and/or move up to 50 pounds Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus Working Conditions Will be required to perform job duties outside of the typical office setting in a plant environment as well as in an office. While performing the duties of this job, the associate may be exposed to moving mechanical parts and vehicular traffic. The associate may be exposed to a wide range of temperatures. The noise level is frequently loud. *Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.

Join American Structurepoint and become part of a team that goes the extra mile for our clients and communities. We live by our values - respect, staff development, results and family. Our team is encouraged to explore new ideas and turn our clients' dreams into reality. With exceptional benefits, training, and mentorship, we pave the way for a rewarding career. Ready for more than just a job? Explore opportunities with us and help improve the quality of life in the communities we serve. American Structurepoint's Road Engineering Group is seeking an entry-level Staff Engineer in Tampa, FL! In this role you'll work as part of a close-knit team on roadway projects for FDOT, cities, towns, and counties throughout Florida. Most of your work will take place in the office, with occasional site visits, as you assist with quantity takeoffs, create construction plan sets using MicroStation OpenRoads Designer (ORD), prepare design documentation, and develop construction cost estimates. From large interstate and interchange projects to urban reconstructions, rural maintenance, and roundabouts, you'll gain hands-on experience across a wide variety of impactful transportation projects. As a company, we are committed to living our values every day and providing you with the support and opportunities to build a fulfilling career while helping to shape Florida's infrastructure. Why start your career American Structurepoint: Onboarding & Training: Learn from experienced professionals and build meaningful, long-term relationships Mentorship & Career Growth: Receive support and guidance as you grow your skills and advance your career Real Projects: Contribute to high-profile, community-impacting projects from day one Industry Connections & Networking: Take advantage of exclusive industry connections and professional opportunities Future Focused: Build a strong foundation for a long, successful career with opportunities to grow within the firm Responsibilities What you will do: Assist with the design and layout of roadway alignments, both horizontal and vertical, for real-world transportation projects Get involved in key aspects of roadway design, including geometry, drainage, signage, pavement markings, and maintenance of traffic Help develop construction plan sets, gaining experience in how projects are prepared for bidding and construction Perform quantity calculations to support bid plan development and construction cost estimates Explore additional areas like pavement analysis, design, and utility coordination for a well-rounded experience Take on a variety of project support tasks, learning how transportation engineering projects come to life from concept to construction Other duties as assigned Qualifications Who you are: Recent or soon-to-be graduate with a bachelor's degree in civil engineering 0-4 years of relevant experience, such as internships, co-ops, academic projects, or entry-level engineering roles American Structurepoint is an equal employer opportunity and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status or any other characteristic protected by law. Who you are: Recent or soon-to-be graduate with a bachelor's degree in civil engineering 0-4 years of relevant experience, such as internships, co-ops, academic projects, or entry-level engineering roles

About the Role Florida Gibsonton Company Siemens Energy, Inc. Organization Gas Services Business Unit Central Full / Part time Full-time Experience Level Experienced Professional A Snapshot of Your Day Siemens Energy's blades and vanes casting operation in Gibsonton, Florida is looking forward to adding the passionate Ceramic Product Engineer to the team! You will join a team of experts and skilled workers with an opportunity to learn and meet ongoing growth targets. You will work in collaboration with the design team during and after product development and will have the opportunity to lead core development projects! How You'll Make an Impact * Collaborate with Siemens Energy design colleagues during and after product development, participating in design reviews and quoting. * Define process-relevant core geometry in coordination with engineering and internal teams to support new component development. * Plan material and equipment needs while leading core development projects to drive innovation and efficiency. * Work with internal and external customer representatives to develop new products and meet program requirements. * Review customer specifications and blueprints to determine necessary procedures, testing, and routing sequences. * Identify opportunities for product improvements, recommend tooling enhancements, and coordinate reworks with validation of results. What You Bring * BS in Mechanical Engineering or another related field * 3 or more years of experience in investment casting supply chain (core or casting preferred). Those with more years of experience may be considered for a higher level. * Aerospace casting experience preferred. * Six Sigma training preferred (Green or Black Belt). * Applicants must be legally authorized for employment in the United States without the need for current or future employer-sponsored work authorization. Siemens Energy employees with current visa sponsorship may be eligible for internal transfers. * This position will require an export license from the Department of Commerce, Bureau of Industry and Security and/or the Department of State, Directorate of Defense Trade Controls. Issuance of any required license is a prerequisite for this position. The candidate must be able to work with export-controlled technology in accordance with US export control law. About the Team Gas Services Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: ******************************************** Rewards * Career growth and development opportunities; supportive work culture * Company paid Health and wellness benefits * Paid Time Off and paid holidays * 401K savings plan with company match * Family building benefits * Parental leave ************************************ Equal Employment Opportunity Statement Siemens Energy and Siemens Gamesa Renewable Energy is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. California Privacy Notice California residents have the right to receive additional notices about their personal information. Click here to read more.