Senior mechanical engineer jobs in Reading, PA

SENIOR PROJECT ENGINEER DEPARTMENT: OPERATIONS/PROJECT MANAGEMENT REPORTS TO: PRESIDENT/CHAIRMAN/CHIEF OPERATING OFFICER/VP OPERATIONS/PROJECT DIRECTOR/PROJECT MANAGER DIRECT REPORTS: PROJECT ENGINEER INTERN, PROJECT ENGINEER SUMMARY DESCRIPTION: This position serves as support for operations on the jobs in which they are involved. Responsibilities range from participation in initial project set up and buyout, cost spread/estimate familiarity, job quantity tracking, on-site daily activity involvement, concrete material tracking, equipment and manpower productivity tracking, invoice approval, extra work ticket tracking, participation in job cost reporting, project safety compliance, quality control compliance, production analysis/tracking. SPECIFIC RESPONSIBILITIES: • Participate in Contract/scope review • Project safety compliance • Job cost spread and estimate • Project sequencing and scheduling • Project quantity/progress tracking • Production analysis/tracking • Project cost reporting • Invoice coding and approval • Material/equipment procurement • Change order request issuance/tracking • Participate in Change Order estimate pricing • Coordination with GC/Owner • Coordination with CSI Operations manager regarding manpower/resources • Mentoring of younger Project Engineers JOB SPECIFIC COMPETENCIES/BEHAVIORS: • Communicates well both verbally and in writing, creates accurate and punctual reports, delivers presentations, shares information and ideas with others, has good listening skills • Ability to identify, assimilate and comprehend the critical elements of a situation to extract and interpret implications of courses of actions to attend to details of a problem. • Effectiveness in planning and controlling work, motivating and developing subordinates, improving work methods and results, encouraging and supporting suggestions for work improvements, etc. • Breaks down problems into smaller components, understands underlying issues, can simplify and process complex issues, understands the difference between critical details and unimportant facts. • Plans for and uses resources efficiently, always looks for ways to reduce costs • Is attentive to detail and accuracy, is committed to excellence, looks for improvements continuously, monitors quality levels, finds root cause of quality problems, owns/acts on quality problems. • Ability to monitor construction schedules and advise on potential setbacks or issues. • Communicates expectations and importance of safety. Follows up and insures safety audits are completed accurately and timely. Identifies critical issues and assists in the development of improvement procedures. Education/Experience/Attributes/Requirements • 3-5 years of experience • Bachelors degree in Construction management or Engineer recommended. • Basic/General knowledge of construction principles/practices required • Experience with project set up, cost spreading, buy out and cost reporting. • Experience with critical path scheduling • Excellent problem-solving skills, with an adaptable and flexible style in working with all types of individuals • Energetic and highly motivated with a strong sense of urgency • Highly entrepreneurial and self-motivated, with the ability to work equally well on own as well as in a team environment. • Ability to walk the job site, climb ladders, and multi floor scaffolding. Leadership Competencies • Adaptability • Teamwork • Creativity • Results • Leadership • Stamina • Courage • Sense of Urgency

Our Summer Internship Program is meticulously designed to provide students with an immersive and dynamic experience within our industry, offering a taste of what it's like to be part of our professional team. We strive to simulate a full-time job, enabling our interns to work hands-on with cutting-edge technology, contribute to meaningful projects, build strong relationships with coworkers, and develop strategic problem-solving skills. Our program is highly selective, hosting only a handful of interns each year, ensuring personalized attention and ample opportunities to work closely with AV team members. We are hiring for various roles and locations throughout the U.S. During the interview process, we will discuss specific details regarding the team and location. **Position Responsibilities** + Assist in the design of mechanical components and systems, including airframes, payload enclosures, ground equipment, launch systems, and electro-mechanical assemblies + Create and modify 3D CAD models and assemblies using **SolidWorks** + Support simulation and analysis tasks using tools like **SolidWorks Simulation** or **ANSYS** + Participate in prototype fabrication, assembly, and testing using in-house tools and rapid prototyping methods (e.g., 3D printing) + Help generate technical drawings and bills of materials in accordance with industry drafting standards + Collaborate with engineers to support design reviews, testing activities, and integration of mechanical systems + Contribute to documentation and reporting of design progress and test results + Learn and assist in configuration control and engineering change processes + Perform other tasks as assigned to support ongoing development efforts **Basic Qualifications (Required Skills & Experience)** + Currently pursuing a **Bachelor's degree** in **Mechanical Engineering, Aerospace Engineering** , or a related field + Basic experience with 3D CAD software (preferably **SolidWorks** ) + Familiarity with mechanical components such as machined parts, sheet metal, plastic parts, or composite materials + Exposure to hands-on prototyping, lab testing, or mechanical assembly through academic or personal projects + Strong communication and organizational skills + Eagerness to learn and contribute in a fast-paced, collaborative environment **Preferred Qualifications & Competencies** + Familiarity with **SolidWorks EPDM** or other Product Data Management (PDM) systems + Exposure to ASME Y14.5 GD&T standards and engineering drawing practices + Interest or experience in designing test fixtures or tooling + Basic understanding of structural dynamics or thermodynamics in mechanical design + Demonstrated problem-solving ability and attention to detail + Self-motivated, proactive, and eager to take initiative + Team player who values collaboration and continuous improvement **Physical Demands** + Ability to work in an office and light R&D lab environment (Constant) + Required to sit or stand for extended periods; use hands and fingers to operate a computer or tools (Frequent) **ITAR Requirement:** _T_ _his position requires access to information that is subject to compliance with the International Traffic Arms Regulations ("ITAR") and/or the Export Administration Regulations ("EAR"). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A "U.S. person" according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements._ **Benefits** : AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************* . We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. **Who We Are** Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. **What We Do** Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. _We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status._ **ITAR** **About AV:** **AV isn't for everyone. We hire the curious, the relentless, the mission-obsessed. The best of the best.** We don't just build defense technology-we redefine what's possible. As the premier autonomous systems company in the U.S., AV delivers breakthrough capabilities across air, land, sea, space, and cyber. From AI-powered drones and loitering munitions to integrated autonomy and space resilience, our technologies shape the future of warfare and protect those who serve. Founded by legendary innovator Dr. Paul MacCready, AV has spent over 50 years pushing the boundaries of what unmanned systems can do. Our heritage includes seven platforms in the Smithsonian-but we're not building history, we're building what's next. **If you're ready to build technology that matters-with speed, scale, and purpose-there's no better place to do it than AV.** **Careers at AeroVironment (*****************************************

Job Description What to Expect: Individual and Cross Functional Projects Throughout 2026 Internship Professional Career Development & Community Outreach Opportunities Final Project Overview Presentation with Executive Leadership Team We have an exciting internship opportunity with the Fenner R&D Engineering Team at Manheim, PA. The successful candidate will be responsible for assisting with and carrying out engineering assignments that support our capital engineer and or process engineering needs. The position reports to the Engineering Supervisor or Manager. As part of the Engineering Team, you will ……. S/he will be responsible for collaborating with various departments in order to: Assist Senior Engineering staff in obtaining an in-depth understanding of product design which allows for standard products and special customer requirements to be successfully designed and manufactured Takes part in determining the manufacturability of products through coordinated efforts with product suppliers, and/or manufacturing engineering and production with assistance from Senior Engineering staff. Interfaces and coordinates with the Lab and Manufacturing personnel on new product design projects to help ensure manufacturing needs are met with overview from Senior Engineering staff. Acts as a resource for technical questions, including appropriate research into new areas that are currently unfamiliar to us. R&D Projects: Amazon Product Development-Material Handling, Link Belt Next Generation, PDM-Drawing development Core Competencies Required Aptitude for Mechanical Design 3-D model in SolidWorks Basic understanding of Microsoft Office products Studies that align with Mechanical Engineering Education and/or Relative Experience: A minimum of 1 year of college or technical school in a related field. Exposure to Mechanical Engineering either through past full or part time employment or as part of the program they are enrolled in is a plus.

TAIT partners with artists, brands, IP holders and place makers to bring culture-defining, never-before-seen experiences to life. With a legacy of innovation spanning over 45 years, TAIT has grown from pioneering in rock 'n' roll concert staging to setting the global standard for extraordinary live events and experiences through cutting-edge technology, precision engineering, and creative design. TAIT's 20 global offices have developed iconic productions and experiences in over 30 countries, all seven continents, and even outer space for renowned performers, theme parks, exhibits, and venues across the globe, including partnerships with Taylor Swift, Cirque Du Soleil, Royal Opera House, Nike, NASA, Bloomberg, Google, Beyoncé, and The Olympics **Position Purpose** Mechanical Design Engineers (MDE) at TAIT are responsible for project-based mechanical design work that focuses on specialized machinery, structures, and rigging systems for the entertainment technology industry. MDEs drive innovative technical solutions, while working within TAIT safety and quality processes, as well as leveraging TAIT standard design principles and practices. As part of the wider mechanical design and engineering team, this role will focus on owning specific subsections of projects, which we call elements. This role is a bridge between associate/entry-level roles (which focus on part-level drawings) and senior/experienced roles (which focus on project-level solutions). The MDE team collaborates across departments (project management, fabrication, procurement, field teams) to ensure project success, from "initial concept" through "opening night." **Essential Responsibilities / Accountabilities** + Collaborate with project teams to develop innovative and effective technical solutions that align with project objectives and exceed client expectations. + Plan and execute technical solutions to work within scope, schedule, and budget. + Apply TAIT design best practices to design for fit and finish, manufacturing efficiency, onsite assembly + disassembly, and packaging. + Identify and understand the underlying physics of complex problems to create successful technical solutions. + Identify and prioritize project specific requirements and constraints to drive technical solutions. + Apply TAIT Project Delivery best practices and processes including design reviews, project team meetings, use of planning systems/software, + Participate in client meetings and produce client-facing drawing packages as needed. + Communicate effectively through hand sketches, 2D CAD drawings and cross sections. + Efficiently generate robust and clean 3D models to support TAIT's collaborative design process. + Produce pitch studies, schematics, storyboards, weight studies, and other supporting tasks to advance the design + engineering process. + Identify appropriate timing and scale of prototyping to support design + engineering process. + Recognize aspects of project work requiring engineering rigor to collaborate with internal and external engineering review on assigned project work. + Identify long lead time items and work with purchasing department to procure project specific components and materials. + Use custom TAIT CAD tools as appropriate in design and detailing processes. + Maintain project documentation including drawing redlines and operation manuals as required. + Release assembly and part drawings to be manufactured internal to TAIT as well as through subcontracting vendors using appropriate dimensioning and tolerancing. + Efficiently solve technical issues as they may arise during fabrication, testing, and/or commissioning. + Support legacy TAIT equipment as required by project needs and/or support department requests. + Maintain awareness of standard of solutions within TAIT's markets, product lines, and platforms. + Maintain awareness of TAIT's markets and competition. To perform this position successfully, each essential responsibility/accountability must be fulfilled satisfactorily. Reasonable accommodation may be made to enable an individual with disabilities to perform the responsibilities and accountabilities outlined above. Other duties may be assigned to meet business needs. **Minimum Qualifications** + BA/BS/BFA in technical theater, engineering, architecture, industrial design, product design and 4+ years of experience working in a related technical field **OR** 7+ years of design experience in live entertainment technology or adjacent field + Background in 3D CAD modeling + Working knowledge of live entertainment technology + Experience working in a short-term, project-based environment + Success collaborating as part of a cross-functional team + Ability to be based in the Lititz, PA TAIT headquarters **Preferred Experience** + Parametric modeling, ideally using Autodesk Inventor + Building information modeling (BIM) + Design for manufacture (DFM), especially aluminum structures and electro-mechanical machines + Rigging, especially theatrical rigging, arena rigging, performer flying, or catenary systems + TAIT markets, especially concert touring and theme parks + TAIT technology, especially winches, trolleys, and other overhead machinery/structures **Working Conditions and Physical Effort** The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to sit and use hands to finger, handle, or feel objects, tools, or controls. The employee frequently is required to reach with hands and arms and talk or hear. Specific vision abilities required by this job include close vision, color vision, and peripheral vision. The employee regularly operates a computer, including typing, using a mouse or keyboard, and viewing the screen for extended periods. While the role does not require regular lifting or physical exertion, there may be occasional onboarding programs or training opportunities that create opportunities for more exposure to physical tasks or new environments (sites, venues, etc.) **Work conditions of the role are:** + Work conditions may involve moderate exposure to unusual elements such as dirt, dust, fumes, unpleasant odors, and/or loud noises. + Work environment involves some exposure to hazards or physical risks which require following basic safety precautions. + Must be able to wear and properly utilize appropriate personal protective equipment (PPE) to work within or visit areas where required. This includes safety glasses, reflective vest, ear plugs, safety toed shoes, and other PPE as required by the location. \#LI-AB TAIT is an equal opportunity employer fully committed to diversity and inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected characteristic as outlined by international, national, state, or local laws.

You are a P.E. with a Mechanical Engineering degree and 10+ years of industry experience in startup, commissioning, maintenance, or operation of Mechanical, HVAC, and Plumbing Systems. You have a broad understanding of mechanical building systems and industrial process systems. You are already an expert. Robson Forensic will train you to be a forensic expert. As a Mechanical Engineering (MEP) Forensic Expert, you will: Investigate mechanical, plumbing, and HVAC incidents. Analyze engineering procedures, applying your comprehensive knowledge of standards and practices. Write clear, scientifically sound reports. Provide expert testimony. Typical cases include system benchmarking disputes, project delays, cost overruns, environmental contamination, or property damage related to the release of water or other chemicals. Personal injury casework varies, but often includes scalding injuries, carbon monoxide poisonings, or exposures to hazardous materials. You will delve into the "why" behind incidents, critically assessing decision-making, operational procedures, and the standard of care. This role offers you a chance to: Use your cumulative training, experience, and critical thinking skills. Collaborate with highly respected experts. Continuously learn and grow. Make a tangible difference. Locations: Columbus/Dublin, OH, Lancaster, PA, Las Vegas, NV Requirements: You have a bachelor's degree in Mechanical Engineering. You have a P.E. license. You have 10+ years of industry experience in startup, commissioning, maintenance, or operation of Mechanical, HVAC, and Plumbing Systems. You have 10+ years of experience reviewing, designing, assessing Mechanical, HVAC, and Plumbing Systems in facilities/building systems. You can work under and meet deadlines. You can work both independently and as part of a collaborative team. You have excellent technical, analytical, writing, and communication skills. You are willing to travel about 20% on average. You have a valid driver's license with a clean driving record and the ability to drive. Prior forensic experience is not required. We seek professionals eager to apply their deep industry knowledge to a challenging new area. ABOUT US: Robson Forensic is a national leader in expert witness consulting, providing technical expertise across many fields within engineering, architecture, science, and a broad range of specialty disciplines. Employees at Robson Forensic work alongside highly respected experts from both industry and academia. Our forensic experts are engaged in meaningful casework that is consequential to industry and society. Robson Forensic provides a unique working dynamic that blends collaboration and autonomy. We are an Equal Opportunity Employer. HOW TO APPLY: If this opportunity meets your expectations for a challenging and rewarding career, and you meet our minimum requirements, please apply and attach your resume and a cover letter outlining your professional background and experience.

Job DescriptionDescription: Join our innovative thermal solutions team- named a Best Place to Work in PA! Advanced Cooling Technologies, Inc. (ACT) is a premier thermal solutions provider serving many diverse markets. Our products and technologies have become integral parts of numerous mission-critical devices, including life-saving MRI and CT scanners, US Military applications, weather and telecommunication satellites, exploratory space missions, and much more. We are proud to be doing work that really makes a difference in our world- and beyond! Position summary: The Product Development Engineer supports various phases of projects ranging from concept generation and initial design all of the way to final delivery hardware and volume production. The types of projects vary from exploratory trade studies to highly detailed thermal analysis, to the fabrication of complicated prototype assemblies and testing. At any given time, the Product Development Engineer is responsible for the success of multiple projects, providing the opportunity to work on all aspects of the product development cycle. Candidates that have a strong technical background with hands-on experience fabricating prototype hardware excel at this position. Responsibilities Include: All aspects of initial product design including: Innovative concept generation Excel or hand calculation analytical analysis 3-D CAD modeling (Solidworks) CFD/FEA analysis 2-D Drawing creation Fabrication procedure and work instruction development Working cohesively with a diverse group of engineers and technicians Managing program schedules and budget Frequent customer communication/interaction Requirements: Our work environment demands a candidate with the ability to take on multiple responsibilities in a fast-paced environment. We are looking for team players who enjoy working with customers, vendors, and co-workers to provide the best service and solutions. The best candidates will be those who embrace new challenges, using critical thinking skills, and developing innovative solutions. B.S. or M.S. degree in Mechanical Engineering or Aerospace Engineering. Proficiency in using commercial CAD (Solidworks), FEA (Solidworks) and CFD software (Autodesk Simulation, Fluent, Comsol) Hands-on experience with design for manufacturability (DFM) and prototype hardware fabrication and testing is a plus! Good verbal and written skills. Must be a US Person as defined by 22 C.F.R. §120.15? (U.S. Citizen, lawful permanent resident, refugee, or asylee) due to ITAR restrictions. We offer an attractive and competitive compensation/benefits package, which includes a profit-sharing bonus plan. Our work environment is comfortable, collaborative, and stimulating. Apply now to get started on a career with ACT! If you are looking for an opportunity to start a career with a growing company doing exciting and important work, please apply today! ACT is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, status as a qualified individual with a disability, or any other trait protected by law. E-verify employer.

Application Window expected to close 02/02/2026. Meet the Team Join Cisco's Silicon Photonics group, where we combine deep expertise in analog, digital, and optical design to build the world's fastest networking solutions. We're a collaborative, innovative team passionate about pushing the limits of high-speed connectivity. Your Impact As a Senior Engineer, you'll lead the design and development of next-generation 100G/200G/400G photonics ICs. From architecture to lab validation, you'll shape product direction, mentor engineers, and ensure Cisco stays at the forefront of optical networking innovation. Specific responsibilities include: * Drive architecture, design, and verification of high-speed mixed-signal and photonics circuits. * Define and document chip-level specifications and verification plans. * Collaborate across optical, electrical, firmware, and manufacturing teams to deliver end-to-end solutions. * Lead lab validation, debug, and yield improvement activities. * Mentor and provide technical guidance to junior engineers. Minimum Qualifications * Bachelors + 12 years of related experience, or Masters + 8 years of related experience, or PhD + 5 years of related experience * Master's or PhD in Electrical Engineering (or related field). * 10+ years of experience in analog/mixed-signal IC design for high-speed systems. * Lab validation and test experience with high-speed equipment. * Experience with Python and C for automation and analysis. * Hands-on expertise with design tools (Cadence Virtuoso, Spectre, Calibre, etc.). Preferred Qualifications * Deep expertise in photonics and high-speed datapath circuits (modulators, TIAs, PLLs, ADC/DAC, CDR). * Knowledge of industry standards (IEEE 802.3, QSFP, OSFP, QSFP-DD). * Experience leading cross-functional teams and making critical design tradeoffs. * Strong leadership, communication, and mentoring skills. Why Cisco? At Cisco, we're revolutionizing how data and infrastructure connect and protect organizations in the AI era - and beyond. We've been innovating fearlessly for 40 years to create solutions that power how humans and technology work together across the physical and digital worlds. These solutions provide customers with unparalleled security, visibility, and insights across the entire digital footprint. Fueled by the depth and breadth of our technology, we experiment and create meaningful solutions. Add to that our worldwide network of doers and experts, and you'll see that the opportunities to grow and build are limitless. We work as a team, collaborating with empathy to make really big things happen on a global scale. Because our solutions are everywhere, our impact is everywhere. We are Cisco, and our power starts with you. Message to applicants applying to work in the U.S. and/or Canada: The starting salary range posted for this position is $166,500.00 to $234,100.00 and reflects the projected salary range for new hires in this position in U.S. and/or Canada locations, not including incentive compensation*, equity, or benefits. Individual pay is determined by the candidate's hiring location, market conditions, job-related skillset, experience, qualifications, education, certifications, and/or training. The full salary range for certain locations is listed below. For locations not listed below, the recruiter can share more details about compensation for the role in your location during the hiring process. U.S. employees are offered benefits, subject to Cisco's plan eligibility rules, which include medical, dental and vision insurance, a 401(k) plan with a Cisco matching contribution, paid parental leave, short and long-term disability coverage, and basic life insurance. Please see the Cisco careers site to discover more benefits and perks. Employees may be eligible to receive grants of Cisco restricted stock units, which vest following continued employment with Cisco for defined periods of time. U.S. employees are eligible for paid time away as described below, subject to Cisco's policies: * 10 paid holidays per full calendar year, plus 1 floating holiday for non-exempt employees * 1 paid day off for employee's birthday, paid year-end holiday shutdown, and 4 paid days off for personal wellness determined by Cisco * Non-exempt employees receive 16 days of paid vacation time per full calendar year, accrued at rate of 4.92 hours per pay period for full-time employees * Exempt employees participate in Cisco's flexible vacation time off program, which has no defined limit on how much vacation time eligible employees may use (subject to availability and some business limitations) * 80 hours of sick time off provided on hire date and each January 1st thereafter, and up to 80 hours of unused sick time carried forward from one calendar year to the next * Additional paid time away may be requested to deal with critical or emergency issues for family members * Optional 10 paid days per full calendar year to volunteer For non-sales roles, employees are also eligible to earn annual bonuses subject to Cisco's policies. Employees on sales plans earn performance-based incentive pay on top of their base salary, which is split between quota and non-quota components, subject to the applicable Cisco plan. For quota-based incentive pay, Cisco typically pays as follows: * .75% of incentive target for each 1% of revenue attainment up to 50% of quota; * 1.5% of incentive target for each 1% of attainment between 50% and 75%; * 1% of incentive target for each 1% of attainment between 75% and 100%; and * Once performance exceeds 100% attainment, incentive rates are at or above 1% for each 1% of attainment with no cap on incentive compensation. For non-quota-based sales performance elements such as strategic sales objectives, Cisco may pay 0% up to 125% of target. Cisco sales plans do not have a minimum threshold of performance for sales incentive compensation to be paid. The applicable full salary ranges for this position, by specific state, are listed below: New York City Metro Area: $191,400.00 - $323,600.00 Non-Metro New York state & Washington state: $176,100.00 - $287,900.00 * For quota-based sales roles on Cisco's sales plan, the ranges provided in this posting include base pay and sales target incentive compensation combined. Employees in Illinois, whether exempt or non-exempt, will participate in a unique time off program to meet local requirements.

Why join us? Our purpose is to design for the good of humankind. It's the ideal we strive toward each day in everything we do. Being a part of MillerKnoll means being a part of something larger than your work team, or even your brand. We are redefining modern for the 21st century. And our success allows MillerKnoll to support causes that align with our values, so we can build a more sustainable, equitable, and beautiful future for everyone. Engineering Lead - MillerKnoll Specials Location: East Greenville, PA WHY JOIN US? Our purpose is to design for the good of humankind. It's the ideal we strive toward each day in everything we do. Being a part of MillerKnoll means being a part of something larger than your work team, or even your brand. We are redefining modern for the 21st century. Our success allows MillerKnoll to support causes that align with our values, so we can build a more sustainable, equitable, and beautiful future for everyone. POSITION PROFILE The MillerKnoll Engineering Lead for the North America Specials Operations is responsible for the people, process, and technology used to meet dealer demand within their scope of responsibility. Customer satisfaction is a top priority for this role, with a focus on first time quality, speed, and design integrity in alignment with the MillerKnoll brand. In addition, cultivating a positive, transparent, and accountable culture that allows us to continuously improve and remain an industry leader. ESSENTIAL JOB RESPONSIBILITIES • Capable of navigating corporate organizational structure and build constructive relationships broadly. • Articulates a clear vision and expectations to drive performance and accountability throughout the team. • Ability to build fluid and effective relationship with customer facing teams, Operations/supply base, and other downstream departments to ensure flow of orders and maintain high levels of customer satisfaction. • Encourages and sponsors continuous improvement of knowledge transfer, error proofing, and process standardization through effective problem solving. • Actively working to enhance designs, tools, and technologies used in the Specials process. • Will require a working knowledge of the Specials process from quote response through order execution. • First responder for order stops, design complexity, or clarification of existing orders. • Responsible for staffing, team structure, and team dynamics. • Within assigned scope, responsible for the product design modification, bill of material updates, and overall order flow. • Active part of a broader global leadership team, responsible for sharing resources to meet customer demand, and collaborating to optimize our processes and capabilities globally. • Can effectively market and advocate “what we do” to diverse audiences. REQUIRED SKILLS • Proven servant leadership style, with an emphasis on human development and optimizing the performance of every individual on the team. • Change agent with a passion for training / helping others; interactions are handled with kindness and humility. • Strong onsite presence required. • Remains calm and professional under pressure. • Driver of department goals and strategy. • Ability to prioritize opportunities and quantify return on investment for initiatives. • Familiarity with MKPS/TPS philosophies and passion for continuous improvement and problem solving. • Action oriented, focuses on and correctly delivers critical details; follows through. • Early adopter of new technologies. • Ability to think logically, analytically, and innovatively to simplify and solve process and design problems. • Strong oral and written communication skills to facilitate interactions with colleagues at all levels of the organization, suppliers, and external MillerKnoll customers. EXPERIENCE CRITERIA • Engineering/ technical degree or equivalent professional experience required • Operational experience preferred • Minimum 5 years of professional experience Who We Hire? Simply put, we hire qualified applicants representing a wide range of backgrounds and abilities. MillerKnoll is comprised of people of all abilities, gender identities and expressions, ages, ethnicities, sexual orientations, veterans from every branch of military service, and more. Here, you can bring your whole self to work. We're committed to equal opportunity employment, including veterans and people with disabilities. This organization participates in E-Verify Employment Eligibility Verification. In general, MillerKnoll positions are closed within 45 days and are open for applications for a minimum of 5 days. We encourage our prospective candidates to submit their application(s) expediently so as not to miss out on our opportunities. We frequently post new opportunities and encourage prospective candidates to check back often for new postings. MillerKnoll complies with applicable disability laws and makes reasonable accommodations for applicants and employees with disabilities. If reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact MillerKnoll Talent Acquisition at careers_********************.

dormakaba is seeking a Manufacturing Engineer II based in its Reamstown, PA manufacturing facility. Manufacturing Engineer II is responsible for optimizing CNC machining processes, reducing cycle times, and driving continuous improvement through lean manufacturing principles. They will collaborate with cross-functional teams to drive process reliability, reduce downtime, and enhance overall equipment effectiveness (OEE). The Manufacturing Engineer II will lead and support continuous improvement initiatives across machining and assembly operations by implementing SMED (Single-Minute Exchange of Dies) techniques to reduce changeover times. They will design and optimize fixturing solutions to improve part stability and throughput and provide hands-on production line support to resolve process bottlenecks and technical issues. HIRING SALARY RANGE: Base Salary $90,000 - $105,000 (Salary to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) Please visit our career site for more information on benefits. WHAT YOU WILL DO * Develop, optimize, and maintain CNC programs for multi-axis machining centers used in the production of door automation systems and industrial components while providing day-to-day technical support to machining cells, including troubleshooting programs, tooling, and equipment issues * Collaborate with machinists and operators to improve setup efficiency, reduce cycle times, ensure consistent part quality and participate and initiate lean activities and improvement projects to support overall manufacturing efficiency and safety throughout the plant * Interpret complex part drawings and Geometric Dimensioning and Tolerancing (GD&T) to create efficient machining strategies and tool paths * Support new product introductions by developing CNC programs and coordinating first article inspections * Train operators and technicians on CNC programming updates, machining best practices, and new equipment. WHAT WE REQUIRE * 5+ years of experience in a manufacturing environment and assembly processes * Experience with Solidworks, Draftsight, drafting, production cell design with the ability to read, analyze and interpret technical drawings with a strong background in GD&T * Background in CNC machining including machine tool technology (Haas VF mills and ST lathes), workholding, fixture design, reading/writing G-code and CAM (Computer Aided-Machining) software * In depth knowledge and experience developing and implementing LEAN processes. * Strong knowledge of machining principles, including cutting speeds and feeds, tool selection, material properties, and chip control WHAT WE PREFER * Bachelor's degree in relevant engineering or technical discipline with Industrial or Manufacturing Engineering * Exposure to ESPRIT or CAMWorks * Black Belt or Green Belt Certification WHAT WE OFFER * Taking Care of our Employees on Day One with Medical, Dental, Vision, Life and Disability Insurance coverage options. No waiting periods! * Your health is our priority, we offer Medical Wellness Programs to aid in your well-being * Vacation and Personal Time Off * We support your growing family; we provide Parental Leave for Moms and Dads! * Wisely plan for your future with our 401k Matching plan beginning on Day One * Supporting your career development with our Tuition Reimbursement Program * Robust culture supporting internal advancement with our Learn and Grow Program * 24/7 access to over 15,000 LinkedIn Learning courses to assist in your professional development and to expand on your individual interests. * Employee Assistance Programs * Voluntary Legal Insurance * Unlimited Referral Reward Bonuses * Corporate Discounts for shopping, travel and more! WHY JOIN DORMAKABA? Our work is IMPORTANT. YOU are important. At schools and universities, in stadiums, airports, hospitals and workplace; for every place that matters. We provide safety, security, and sustainability, providing people with the tools to shape their careers for growth. EVERY team member contributes to our mission and can make a positive difference. Our culture focuses on Growing the Business, Growing Together and Growing Ourselves. We are a global company with more than 16,000 employees worldwide giving you endless opportunities for growth and advancement. #LI-LM1 #LI-Onsite

Facilities Engineer with primarily responsibility for the planning and implementing a strategy aimed at maintain and improving the Lancaster GMP facility infrastructure. Focus on preparing and owning the site multi-year infrastructure plan, capital and expense projects, developing investment business cases, preparing scopes of work, leading project design teams, interfacing with internal customers to develop conceptual plans/designs and user requirements, partnering with site business leaders in identifying key infrastructure initiatives related to: regulatory compliance, energy management, utility systems, building structures, security infrastructure, grounds, building automation systems, etc. Ensure projects meet all critical -to -quality commitments in the areas of quality, schedule, and cost. Interface with the plant maintenance and engineering associates on projects requiring coordination with the manufacturing and in many cases assume the role of the site technical lead for nonmanufacturing related systems. Ensure compliance with the EH&S, OSHA, FDA and any other regulatory agencies, to include building costs Qualifications Education: 2-5 years with BS 0-3 years with MS Experience: 1-3 years experience, or equivalent knowledge and skills, necessary to satisfactorily perform the position responsibilities. Prefered Hours: 8am-430pm Additional Information

APPLICATION INSTRUCTIONS: * CURRENT PENN STATE EMPLOYEE (faculty, staff, technical service, or student), please login to Workday to complete the internal application process. Please do not apply here, apply internally through Workday. * CURRENT PENN STATE STUDENT (not employed previously at the university) and seeking employment with Penn State, please login to Workday to complete the student application process. Please do not apply here, apply internally through Workday. * If you are NOT a current employee or student, please click "Apply" and complete the application process for external applicants. Approval of remote and hybrid work is not guaranteed regardless of work location. For additional information on remote work at Penn State, see Notice to Out of State Applicants. POSITION SPECIFICS The Electro-Optics Center (EOC), located in Freeport PA, a Division in the Applied Research Laboratory (ARL) at Penn State University, is seeking a Photonics Research and Development Engineer with expertise in Optical Communications, supporting military and intelligence community customers. You Will: * Perform research and development tasks in optical communications. These include system-based analysis tasks as well as prototype development and testing * Communicate and document results in reports and presentations * Assist with development of proposals for projects * Assist in new concept development; analyzing alternatives independently and applying engineering techniques and procedures to assignments * Lead optical communication related projects of small or moderate size and scope, making substantial contributions * Engage with government customers to identify opportunities and provide potential solutions that lead to funded projects * Provide technical leadership within the division for optical communications * Chair sessions at technical conferences/meetings; participate in external seminars, workshops, professional societies and committees * Independently manage multiple and/or large optical communications projects * Lead the development of proposals and projects that further our knowledge of optical communications * Develop and maintain long-term professional relationships with relevant manufacturers and system integrators, as well as with government sponsors, to ensure projects meet customer requirements and are consistent with ARL's position of trust and strategic mission * Participate in strategic planning initiatives and collaborate with engineers in other technical areas across ARL Required skills and experience includes: * 10+ year's experience in guided (fiber), free-space or under-sea optical communications * Optical system design, especially as it relates to free space and/or fiber optical communication systems * Communication architectures, systems, protocols, devices, media, and integration * Hands-on prototyping and demonstration of optical and RF components, links, and networks * Interfacing with, collection from, and diagnosis of data from hardware * Communicate, document, and present results Preferred skills and experience includes: * A Master's degree in Engineering, Physics, Optics, or a related field is highly desired * Significant experience in the development and understanding of optical communication architectures, systems, protocols, devices, media, and integration - especially as it pertains to military applications * Expert knowledge of current state-of-the-art systems, optical propagation, laser communications systems and subsystems * Space-based payload and systems experience * Experience with end-to-end optical remote sensor development * Current relationships with optical suppliers and familiar with the optics vendor ecosystem * Business development experience with government customers * Project management and leadership * Experience with VPI or OptSim or the like is a bonus * An active Secret security clearance with eligibility for TS/SCI is highly desirable Your working location will be full onsite located in Freeport, PA. Questions related to flexible work should be directed to the hiring manager during the interview process. MINIMUM EDUCATION, WORK EXPERIENCE & REQUIRED CERTIFICATIONS Bachelor's Degree - Engineering or Science 19+ years of relevant experience Required Certifications: None ARL's purpose is to research and develop innovative solutions to challenging scientific, engineering, and technology problems in support of the Navy, the Department of Defense (DoD), and the Intel Community (IC). FOR FURTHER INFORMATION on ARL, visit our web site at **************** BACKGROUND CHECKS/CLEARANCES Employment with the University will require successful completion of background check(s) in accordance with University policies. All positions at ARL require candidates to possess the ability to obtain a government security clearance; you will be notified during the interview process if this position is subject to a government background investigation. You must be a U.S. citizen to apply. Employment with the ARL will require successful completion of a pre-employment drug screen. SALARY & BENEFITS The salary range for this position, including all possible grades, is $141,700.00 - $219,600.00.THE PROPOSED SALARY RANGE MAY BE IMPACTED BY GEOGRAPHIC DIFFERENTIAL Salary Structure - Information on Penn State's salary structure Penn State provides a competitive benefits package for full-time employees designed to support both personal and professional well-being. In addition to comprehensive medical, dental, and vision coverage, employees enjoy robust retirement plans and substantial paid time off which includes holidays, vacation and sick time. One of the standout benefits is the generous 75% tuition discount, available to employees as well as eligible spouses and children. For more detailed information, please visit our Benefits Page. CAMPUS SECURITY CRIME STATISTICS Pursuant to the Jeanne Clery Disclosure of Campus Security Policy and Campus Crime Statistics Act and the Pennsylvania Act of 1988, Penn State publishes a combined Annual Security and Annual Fire Safety Report (ASR). The ASR includes crime statistics and institutional policies concerning campus security, such as those concerning alcohol and drug use, crime prevention, the reporting of crimes, sexual assault, and other matters. The ASR is available for review here. EEO IS THE LAW Penn State is an equal opportunity employer and is committed to providing employment opportunities to all qualified applicants without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are unable to use our online application process due to an impairment or disability, please contact ************. Federal Contractors Labor Law Poster PA State Labor Law Poster Penn State Policies Copyright Information Hotlines

About Us Concrete Strategies Inc. (CSI) is a full-service national concrete contractor with the in-house resources and expertise to safely self-perform a wide variety of commercial construction including all aspects of cast in place concrete, precast erections, and concrete restoration. CSI began as Clayco Tilt-Up in 1988. In 2005, our services expanded, and we re-branded the company to showcase the additional offerings. Our 30 years in the business have enabled us to learn and refine our craft to meet the current market needs. Why Concrete Strategies? We provide the integrated services our clients expect, achieving Construction Success through: • Economical Pricing • Safe Jobsites • Efficient, On-time Delivery • High-quality, Innovative Results National Presence SEATTLE - PHOENIX - KANSAS CITY - ST. LOUIS - PENNSYLVANIA - DES MOINES Engineering News Record Rankings #8 Top 20 Firms in Concrete #102 Top 600 Specialty Contractors #26 Midwest Specialty Contractors #3 Midwest Top Specialty Contractors by Sector - Missouri #2 Midwest Top Specialty Contractors by Sector - Concrete SUMMARY DESCRIPTION: This position serves as support for operations on the jobs in which they are involved. Responsibilities range from participation in initial project set up and buyout, cost spread/estimate familiarity, job quantity tracking, on-site daily activity involvement, concrete material tracking, equipment and manpower productivity tracking, invoice approval, extra work ticket tracking, participation in job cost reporting, project safety compliance, quality control compliance, production analysis/tracking. This position will require travel to jobsites, 75% travel is likely. SPECIFIC RESPONSIBILITIES: • Project safety compliance • Job cost spread and estimate familiarity • Participation in project sequencing and scheduling • Project quantity/progress tracking • Production analysis/tracking • Participation in Project cost reporting • Invoice coding and approval • Material/equipment procurement • Change order request issuance/tracking • Coordination with GC/Owner • Coordination with CSI Operations manager regarding manpower/resources JOB SPECIFIC COMPETENCIES/BEHAVIORS: • Communicates well both verbally and in writing, creates accurate and punctual reports, delivers presentations, shares information and ideas with others, has good listening skills • Ability to identify, assimilate and comprehend the critical elements of a situation to extract and interpret implications of courses of actions to attend to details of a problem. • Effectiveness in planning and controlling work, motivating and developing subordinates, improving work methods and results, encouraging and supporting suggestions for work improvements, etc. • Breaks down problems into smaller components, understands underlying issues, can simplify and process complex issues, understands the difference between critical details and unimportant facts. • Plans for and uses resources efficiently, always looks for ways to reduce costs • Is attentive to detail and accuracy, is committed to excellence, looks for improvements continuously, monitors quality levels, finds root cause of quality problems, owns/acts on quality problems. • Ability to monitor construction schedules and advise on potential setbacks or issues. • Communicates expectations and importance of safety. Follows up and insures safety audits are completed accurately and timely. Identifies critical issues and assists in the development of improvement procedures. Education/Experience/Attributes/Requirements • 0-5 years of experience • Bachelors degree in Construction management or Engineer recommended. • Basic/General knowledge of construction principles/practices required • Excellent problem-solving skills, with an adaptable and flexible style in working with all types of individuals • Energetic and highly motivated with a strong sense of urgency • Highly entrepreneurial and self-motivated, with the ability to work equally well on own as well as in a team environment. • Ability to walk the job site, climb ladders, and multi floor scaffolding. The Company is an Equal Opportunity Employer. The Company hires individuals on the basis of their qualifications and ability to complete the essential requirements and responsibilities of the job to be filled. It is our policy to grant equal employment opportunities to qualified persons without regard to race, color, national origin, sex, sexual orientation, gender identity/gender expression, religion, pregnancy, parental status, marital status, age, veterans' or military status, regardless of how discharged, or physical or mental handicap or disability, genetic information, or other classification protected by applicable federal, state or local laws. The Company will provide equal opportunities in employment and take affirmative action as necessary in all aspects of the employment relationship, including without limitation, recruiting, hiring, compensation, promotion, working conditions, benefits and all other privileges, terms and conditions of employment. All employment decisions are made based on availability, qualifications, ability, merit and/or other legitimate factors consistent with principles of equal employment.

The **Sr. Mechanical Engineer** applies engineering techniques to design, install, modify, analyze, repair and test tools, engines, machines and other mechanically functioning equipment. Leads and supports the mechanical design, testing, and production of electrical machines as well as the design of electronics packaging for high altitude aerospace applications. Leads or supports mechanical packaging development effort for electronic equipment that withstand stringent environmental requirements (i.e., mass, volume, thermal, vibration). Manages mid-size development projects outsourced to sub-contractors (development of a system, equipment or components). **Position Responsibilities** + Leads or supports the thermal, structural, dynamic, and fluid flow analysis efforts for electronics equipment + Leads the testing and data collection in the laboratory and the field + Models the mechanical devices and selects the proper material + Performs stress and fatigue analysis; Performs thermal analysis and selects bonding material + Develops mechanical drawings and specifies the dimensional tolerances + Develops assembly instructions and test procedures + Develops test plans and test procedures to verify designs + Works on complex issues where analysis of situations or data requires an in-depth knowledge of variable factors + Executes team assignments effectively following the given schedule, milestone, and available resources. May coordinate activities of other personnel (Team Lead). + Other duties as assigned **Basic Qualifications (Required Skills & Experience)** + Minimum 8 - 12 years of relevant technical experience in Mechanical Engineering, of which a minimum of 5 years in developing for production rotating electrical machines, electronics equipment packaging solution, and/or mechanical devices solutions for industrial and aerospace applications + Experienced in developing requirements specification for mechanical subsystems and according to MIL-STD 961D standard or equivalent + Has sufficient proficiency with the following CAD /CAE tools to perform one's position responsibilities: + SolidWorks for mechanical modeling. + ANSYS for structural and fatigue analysis + ANSYS Icepack for thermal analysis. + Extensive experience with Solid Works and designing electrical rotating machines for high-performance applications + Extensive experience with thermal management tradeoffs and solutions and materials properties + Experienced with bonding techniques for extreme environmental conditions using different adhesives + Experienced with manufacturing methodologies of electrical machines + Experienced with creating and maintaining product document tree + Experienced with creating and maintaining products bill of materials (BOM) + Experienced with test and measurement techniques, such as torque transducer calibration and instrumentation **Other Qualifications & Desired Competencies** + MS degree in Mechanical Engineering is preferred + Recognition by a reputable international engineering society such as ASME at the senior membership level or higher is desired + Demonstrates familiarity with MIL-STD-810 or DO-160 + Demonstrates familiarity with MIL-STD 961D standards (or equivalent) for developing subsystem technical specifications + Demonstrates full understanding & knowledge of engineering principles in the technical discipline and successfully works independently + Effectively articulates concepts and ideas to both technical and non-technical staff + Able to excel in a fast-paced, deadline-driven environment, where small teams share a broad variety of duties + Displays strong initiative and drive to accomplish goals and meet company objectives + Takes ownership and responsibility for current and past work products + Is committed to learning from mistakes and driven to improve and enhance performance of oneself, others, and the company + Has effective problem-solving, analytical, interpersonal and communication skills (Verbal and written) + Focuses on teamwork, collaboration and puts the success of the team above one's own interests **Physical Demands** + Ability to work in an office and production environment (Constant) + Required to sit and stand for long periods; talk, hear, and use hands and fingers to operate a computer and telephone keyboard (Frequent) **ITAR Requirement:** _T_ _his position requires access to information that is subject to compliance with the International Traffic Arms Regulations ("ITAR") and/or the Export Administration Regulations ("EAR"). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A "U.S. person" according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements._ **Benefits** : AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************* . We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. **Who We Are** Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. **What We Do** Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. _We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status._ **ITAR** **About AV:** **AV isn't for everyone. We hire the curious, the relentless, the mission-obsessed. The best of the best.** We don't just build defense technology-we redefine what's possible. As the premier autonomous systems company in the U.S., AV delivers breakthrough capabilities across air, land, sea, space, and cyber. From AI-powered drones and loitering munitions to integrated autonomy and space resilience, our technologies shape the future of warfare and protect those who serve. Founded by legendary innovator Dr. Paul MacCready, AV has spent over 50 years pushing the boundaries of what unmanned systems can do. Our heritage includes seven platforms in the Smithsonian-but we're not building history, we're building what's next. **If you're ready to build technology that matters-with speed, scale, and purpose-there's no better place to do it than AV.** **Careers at AeroVironment (*****************************************

TAIT partners with artists, brands, IP holders and place makers to bring culture-defining, never-before-seen experiences to life. With a legacy of innovation spanning over 45 years, TAIT has grown from pioneering in rock 'n' roll concert staging to setting the global standard for extraordinary live events and experiences through cutting-edge technology, precision engineering, and creative design. TAIT's 20 global offices have developed iconic productions and experiences in over 30 countries, all seven continents, and even outer space for renowned performers, theme parks, exhibits, and venues across the globe, including partnerships with Taylor Swift, Cirque Du Soleil, Royal Opera House, Nike, NASA, Bloomberg, Google, Beyoncé, and The Olympics **Position Purpose** As an Associate Mechanical Design Engineer (AMDE) at TAIT, you will be responsible for project-based work that focuses on specialized machinery and fabrications for the entertainment technology industry. You will work to gain a full understanding of TAIT safety and quality processes while also being aware of standard design principles and practices. You will be responsible for developing designs from concept through to detailed design. Additionally, you will be responsible for collaborating with all departments, rendering support to the production teams, project management, and management. **Essential Responsibilities / Accountabilities** + Learn and follow standard design principles and practices with extensive supervision.Uphold professional and ethical responsibilities, including honesty, respect for life, law, environment, public good, accuracy, rigor, leadership, and communication. + Handle project kits or small complexity/risk project elements under supervision of others. + Resolve technical issues with supervision to gain expertise through real world application. + Utilize CAD platforms to create 2D sketches, hand sketch schematics, and draw full 3D models. + Understand the importance of efficient design process and urgency level. + Develop designs from concept to detailed design, design reviews, and release of production drawings. + Produce overview packets to support client approval and internal communication processes. + Utilize CAD tools and internal file structure to document designs properly + Collaborate with all departments, participate in design reviews, understand capabilities of machining and fab, material selection for in-house capabilities and outside vendors + Conceive standard solutions, client drawing needs, and design decisions must be backed by rational. + Understand plans, schedules, documents, and activities for assigned elements or projects. + Grasp overall department objectives and high-level project matters, critical issues, new concepts, and policy matters. + Receive guidance on application of standard engineering principles and practices. + Execute on scope, budget, and schedule for assignments. + Understand plans, schedules, documents, and activities for assigned elements or projects. + Learn and follow TAIT safety and quality processes. + Attend inter-disciplinary project meetings as appropriate. + Participate in interview process of new Design and Engineering staff, and on-board new staff. + Adhere to all company safety policies and procedures. + Attend meetings, seminars, and training sessions as required. + Perform assigned duties according to the policies and expectations prescribed by the company. To perform this position successfully, each essential responsibility/accountability must be fulfilled satisfactorily. Reasonable accommodation may be made to enable an individual with disabilities to perform the responsibilities and accountabilities outlined above. Other duties may be assigned to meet business needs. **Behavioral Competencies** + **Communication:** The ability to convey information clearly and effectively through oral and written means. + **Teamwork and Collaboration:** The ability to work effectively with others, and to establish and maintain positive, productive relationships with colleagues. + **Adaptability and Flexibility:** The ability to adjust to change and to modify one's approach in response to evolving circumstances. + **Problem-Solving:** The ability to identify, analyze and solve problems effectively and efficiently. + **Emotional Intelligence:** The ability to understand and manage one's own emotions, as well as the emotions of others. + **Resilience:** The ability to manage stress and cope with adversity, while maintaining a positive outlook and high level of productivity. + **Strategic Thinking:** The ability to think creatively and strategically, and to align one's efforts with broader organizational goals and objectives. **Minimum Qualifications:** + Associate Degree in engineering, Industrial Design, CADD, Technical Theatre, Architectural or Machine Design preferred, or High School Diploma/GED and 2 years of equivalent experience + Knowledge of TAIT's markets and competition. + Experience with 2D sketches and 3D CAD modeling. + Excellent oral and written communication skills **Working Conditions and Physical Effort** The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to sit and use hands to finger, handle, or feel objects, tools, or controls. The employee frequently is required to reach with hands and arms and talk or hear. Specific vision abilities required by this job include close vision, color vision, and peripheral vision. The employee regularly operates a computer, including typing, using a mouse or keyboard, and viewing the screen for extended periods. While the role does not require regular lifting or physical exertion, there may be occasional onboarding programs or training opportunities that create opportunities for more exposure to physical tasks or new environments (sites, venues, etc.) **Work conditions of the role are:** + Work conditions may involve moderate exposure to unusual elements such as dirt, dust, fumes, unpleasant odors, and/or loud noises + Work environment involves some exposure to hazards or physical risks which require following basic safety precautions + Must be able to wear and properly utilize appropriate personal protective equipment (PPE) to work within or visit areas where required. This includes safety glasses, reflective vest, ear plugs, safety toed shoes, and other PPE as required by the location. \#LI-AW1 TAIT is an equal opportunity employer fully committed to diversity and inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected characteristic as outlined by international, national, state, or local laws.

You are a P.E. with a B.S. in Mechanical Engineering and 10+ years of Facilities Maintenance/Management experience (commercial, institutional, and/or residential). You have a deep understanding of property management and safety. You are already an expert. Robson Forensic will train you to be a forensic expert. As a Facilities/Mechanical Engineer & Property Management Expert , you will: Investigate facilities and grounds maintenance and management incidents. Analyze documents and on-site conditions to determine the facts and issues at hand. Write clear, scientifically sound reports. Provide expert testimony . You will delve into the "why" behind incidents, critically assessing decision-making, operational procedures, and the standard of care. It is extremely challenging work, but also an intellectually thrilling and rewarding experience. You will: Use your cumulative training, experience, and critical thinking skills. Collaborate with highly respected experts. Continuously learn and grow. Make a tangible difference. LOCATION: Lancaster, PA REQUIREMENTS You have a bachelor's degree in Mechanical Engineering . You have a P.E. license. You have 10+ years of experience as a commercial, institutional, and/or residential Facilities Manager. You have hands-on experience assessing, running, and troubleshooting building systems. Your experience managing a winter maintenance crew is a plus. You have an in-depth knowledge of facilities and grounds safety. You can work both independently and as part of a collaborative team . You have excellent technical, analytical, writing and communication skills. You are willing to travel about 20% on average. You have a valid driver's license and the ability to drive. Prior forensic experience is not required. We seek professionals eager to apply their deep industry knowledge to a challenging new domain. ABOUT US : Robson Forensic is a national leader in expert witness consulting, providing technical expertise across many fields within engineering, architecture, science, and a broad range of specialty disciplines. Employees at Robson Forensic work alongside highly respected experts from both industry and academia. Our forensic experts are engaged in meaningful casework that is consequential to industry and society. Robson Forensic provides a unique working dynamic that blends collaboration and autonomy. We are an Equal Opportunity Employer. HOW TO APPLY : If this opportunity meets your expectations for a challenging and rewarding career, and you meet our minimum requirements, please apply and attach your resume and a cover letter outlining your professional background and experience.

Application Window expected to close 02/02/2026. **Meet the Team** Join Cisco's Silicon Photonics group, where we combine deep expertise in analog, digital, and optical design to build the world's fastest networking solutions. We're a collaborative, innovative team passionate about pushing the limits of high-speed connectivity. **Your Impact** As a Senior Engineer, you'll lead the design and development of next-generation 100G/200G/400G photonics ICs. From architecture to lab validation, you'll shape product direction, mentor engineers, and ensure Cisco stays at the forefront of optical networking innovation. Specific responsibilities include: + Drive architecture, design, and verification of high-speed mixed-signal and photonics circuits. + Define and document chip-level specifications and verification plans. + Collaborate across optical, electrical, firmware, and manufacturing teams to deliver end-to-end solutions. + Lead lab validation, debug, and yield improvement activities. + Mentor and provide technical guidance to junior engineers. **Minimum Qualifications** + Bachelors + 12 years of related experience, or Masters + 8 years of related experience, or PhD + 5 years of related experience + Master's or PhD in Electrical Engineering (or related field). + 10+ years of experience in analog/mixed-signal IC design for high-speed systems. + Lab validation and test experience with high-speed equipment. + Experience with Python and C for automation and analysis. + Hands-on expertise with design tools (Cadence Virtuoso, Spectre, Calibre, etc.). **Preferred Qualifications** + Deep expertise in photonics and high-speed datapath circuits (modulators, TIAs, PLLs, ADC/DAC, CDR). + Knowledge of industry standards (IEEE 802.3, QSFP, OSFP, QSFP-DD). + Experience leading cross-functional teams and making critical design tradeoffs. + Strong leadership, communication, and mentoring skills. **Why Cisco?** At Cisco, we're revolutionizing how data and infrastructure connect and protect organizations in the AI era - and beyond. We've been innovating fearlessly for 40 years to create solutions that power how humans and technology work together across the physical and digital worlds. These solutions provide customers with unparalleled security, visibility, and insights across the entire digital footprint. Fueled by the depth and breadth of our technology, we experiment and create meaningful solutions. Add to that our worldwide network of doers and experts, and you'll see that the opportunities to grow and build are limitless. We work as a team, collaborating with empathy to make really big things happen on a global scale. Because our solutions are everywhere, our impact is everywhere. We are Cisco, and our power starts with you. **Message to applicants applying to work in the U.S. and/or Canada:** The starting salary range posted for this position is $166,500.00 to $234,100.00 and reflects the projected salary range for new hires in this position in U.S. and/or Canada locations, not including incentive compensation*, equity, or benefits. Individual pay is determined by the candidate's hiring location, market conditions, job-related skillset, experience, qualifications, education, certifications, and/or training. The full salary range for certain locations is listed below. For locations not listed below, the recruiter can share more details about compensation for the role in your location during the hiring process. U.S. employees are offered benefits, subject to Cisco's plan eligibility rules, which include medical, dental and vision insurance, a 401(k) plan with a Cisco matching contribution, paid parental leave, short and long-term disability coverage, and basic life insurance. Please see the Cisco careers site to discover more benefits and perks. Employees may be eligible to receive grants of Cisco restricted stock units, which vest following continued employment with Cisco for defined periods of time. U.S. employees are eligible for paid time away as described below, subject to Cisco's policies: + 10 paid holidays per full calendar year, plus 1 floating holiday for non-exempt employees + 1 paid day off for employee's birthday, paid year-end holiday shutdown, and 4 paid days off for personal wellness determined by Cisco + Non-exempt employees** receive 16 days of paid vacation time per full calendar year, accrued at rate of 4.92 hours per pay period for full-time employees + Exempt employees participate in Cisco's flexible vacation time off program, which has no defined limit on how much vacation time eligible employees may use (subject to availability and some business limitations) + 80 hours of sick time off provided on hire date and each January 1st thereafter, and up to 80 hours of unused sick time carried forward from one calendar year to the next + Additional paid time away may be requested to deal with critical or emergency issues for family members + Optional 10 paid days per full calendar year to volunteer For non-sales roles, employees are also eligible to earn annual bonuses subject to Cisco's policies. Employees on sales plans earn performance-based incentive pay on top of their base salary, which is split between quota and non-quota components, subject to the applicable Cisco plan. For quota-based incentive pay, Cisco typically pays as follows: + .75% of incentive target for each 1% of revenue attainment up to 50% of quota; + 1.5% of incentive target for each 1% of attainment between 50% and 75%; + 1% of incentive target for each 1% of attainment between 75% and 100%; and + Once performance exceeds 100% attainment, incentive rates are at or above 1% for each 1% of attainment with no cap on incentive compensation. For non-quota-based sales performance elements such as strategic sales objectives, Cisco may pay 0% up to 125% of target. Cisco sales plans do not have a minimum threshold of performance for sales incentive compensation to be paid. The applicable full salary ranges for this position, by specific state, are listed below: New York City Metro Area: $191,400.00 - $323,600.00 Non-Metro New York state & Washington state: $176,100.00 - $287,900.00 * For quota-based sales roles on Cisco's sales plan, the ranges provided in this posting include base pay and sales target incentive compensation combined. ** Employees in Illinois, whether exempt or non-exempt, will participate in a unique time off program to meet local requirements. Cisco is an Affirmative Action and Equal Opportunity Employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, genetic information, age, disability, veteran status, or any other legally protected basis. Cisco will consider for employment, on a case by case basis, qualified applicants with arrest and conviction records.

Job DescriptionDescription: Bring Advanced Thermal Technologies From Concept to Production At Advanced Cooling Technologies (ACT), we design and manufacture high-performance thermal management solutions used in spacecraft, military systems, medical devices, laboratory instrumentation, and next-generation HVAC systems. We are proud to be recognized as a Best Places to Work in PA for three consecutive years, and we're continuing to grow. We are seeking a Manufacturing Engineer who enjoys variety, hands-on engineering, creative problem solving, and true ownership of their work. This role bridges Product Development and Production-ensuring that ACT's most advanced technologies can be built efficiently, reliably, and with exceptional quality. What You'll Do In this role, you will directly influence how new thermal products move from concept to repeatable, scalable production. You will: New Product Introduction & Process Development Lead smooth transitions of products from Product Development to Manufacturing Translate engineering designs and customer requirements into robust processes, tooling, and documentation Develop and improve fabrication processes, workflows, and material flow Tooling, Procedure & Documentation Design and build custom tooling, fixtures, and jigs that enable high-quality manufacturing Create procedures, travelers, and work instructions to ensure consistency and compliance Support technicians and production staff with clear direction and engineering expertise Production Support & Continuous Improvement Analyze cycle times, floor layouts, and production data to improve throughput and efficiency Troubleshoot manufacturing issues and identify cost, quality, or process improvements Interact directly with suppliers, generating and approving purchase orders as needed Evaluate test results, quality data, and customer requirements to ensure compliance This is a hands-on role-expect regular interaction with technicians, parts, processes, and equipment. You won't sit behind a desk all day. Why This Role Is Exciting Many Manufacturing Engineer roles are repetitive. This one isn't. At ACT, you'll: Work on complex thermal systems used in spacecraft, military vehicles, and cutting-edge commercial applications Design tooling that directly affects product performance Influence manufacturing from the earliest stages of product development See your work move from drawing ? prototype ? full production Be part of a collaborative team where engineering, production, and leadership work closely together If you enjoy seeing your engineering ideas become real products-and you like a mix of design, analysis, and hands-on problem solving-you'll thrive here. Requirements:What You Bring B.S. in Mechanical Engineering or related engineering discipline Proficiency in CAD (SolidWorks preferred) Experience with mechanical inspection and understanding of GD&T Ability to analyze data, processes, and workflows Strong communication, documentation, and collaboration skills Experience with LabVIEW and Excel-based databases is a plus Must be a U.S. Person as defined by 22 C.F.R. §120.15 (due to ITAR regulations) Benefits & Culture ACT offers a competitive and employee-focused total rewards package, including: Low-cost medical, dental, and vision coverage Company-paid life and disability insurance 401(k) with company match Profit-sharing bonus plan Generous PTO, up to 10 paid holidays, and a 9/80 schedule (every other Friday off!) A culture grounded in innovation, collaborative and supportive teams, and company events and perks that make ACT a genuinely enjoyable place to work! ACT is committed to equal opportunity and participates in the E-Verify program.

Facilities Engineer with primarily responsibility for the planning and implementing a strategy aimed at maintain and improving the Lancaster GMP facility infrastructure. Focus on preparing and owning the site multi-year infrastructure plan, capital and expense projects, developing investment business cases, preparing scopes of work, leading project design teams, interfacing with internal customers to develop conceptual plans/designs and user requirements, partnering with site business leaders in identifying key infrastructure initiatives related to: regulatory compliance, energy management, utility systems, building structures, security infrastructure, grounds, building automation systems, etc. Ensure projects meet all critical -to -quality commitments in the areas of quality, schedule, and cost. Interface with the plant maintenance and engineering associates on projects requiring coordination with the manufacturing and in many cases assume the role of the site technical lead for nonmanufacturing related systems. Ensure compliance with the EH&S, OSHA, FDA and any other regulatory agencies, to include building costs Qualifications Education: 2-5 years with BS 0-3 years with MS Experience: 1-3 years experience, or equivalent knowledge and skills, necessary to satisfactorily perform the position responsibilities. Prefered Hours: 8am-430pm Additional Information

TAIT partners with artists, brands, IP holders and place makers to bring culture-defining, never-before-seen experiences to life. With a legacy of innovation spanning over 45 years, TAIT has grown from pioneering in rock 'n' roll concert staging to setting the global standard for extraordinary live events and experiences through cutting-edge technology, precision engineering, and creative design. TAIT's 20 global offices have developed iconic productions and experiences in over 30 countries, all seven continents, and even outer space for renowned performers, theme parks, exhibits, and venues across the globe, including partnerships with Taylor Swift, Cirque Du Soleil, Royal Opera House, Nike, NASA, Bloomberg, Google, Beyoncé, and The Olympics **Position Purpose** Mechanical Design Engineers (MDE) at TAIT are responsible for project-based mechanical design work that focuses on specialized machinery, structures, and rigging systems for the entertainment technology industry. MDEs drive innovative technical solutions, while working within TAIT safety and quality processes, as well as leveraging TAIT standard design principles and practices. As part of the wider mechanical design and engineering team, this role will focus on owning specific subsections of projects, which we call elements. This role is a bridge between associate/entry-level roles (which focus on part-level drawings) and senior/experienced roles (which focus on project-level solutions). The MDE team collaborates across departments (project management, fabrication, procurement, field teams) to ensure project success, from "initial concept" through "opening night." **Essential Responsibilities / Accountabilities** + Collaborate with project teams to develop innovative and effective technical solutions that align with project objectives and exceed client expectations. + Plan and execute technical solutions to work within scope, schedule, and budget. + Apply TAIT design best practices to design for fit and finish, manufacturing efficiency, onsite assembly + disassembly, and packaging. + Identify and understand the underlying physics of complex problems to create successful technical solutions. + Identify and prioritize project specific requirements and constraints to drive technical solutions. + Apply TAIT Project Delivery best practices and processes including design reviews, project team meetings, use of planning systems/software, + Participate in client meetings and produce client-facing drawing packages as needed. + Communicate effectively through hand sketches, 2D CAD drawings and cross sections. + Efficiently generate robust and clean 3D models to support TAIT's collaborative design process. + Produce pitch studies, schematics, storyboards, weight studies, and other supporting tasks to advance the design + engineering process. + Identify appropriate timing and scale of prototyping to support design + engineering process. + Recognize aspects of project work requiring engineering rigor to collaborate with internal and external engineering review on assigned project work. + Identify long lead time items and work with purchasing department to procure project specific components and materials. + Use custom TAIT CAD tools as appropriate in design and detailing processes. + Maintain project documentation including drawing redlines and operation manuals as required. + Release assembly and part drawings to be manufactured internal to TAIT as well as through subcontracting vendors using appropriate dimensioning and tolerancing. + Efficiently solve technical issues as they may arise during fabrication, testing, and/or commissioning. + Support legacy TAIT equipment as required by project needs and/or support department requests. + Maintain awareness of standard of solutions within TAIT's markets, product lines, and platforms. + Maintain awareness of TAIT's markets and competition. To perform this position successfully, each essential responsibility/accountability must be fulfilled satisfactorily. Reasonable accommodation may be made to enable an individual with disabilities to perform the responsibilities and accountabilities outlined above. Other duties may be assigned to meet business needs. **Minimum Qualifications** + Formal degree in Technical Theater, Engineering, Architectural, Industrial Design, Machine Design, CADD preferred, or High School Diploma/GED and equivalent work experience listed below: + Design Experience: minimum 7 years with formal degree + Design Experience: minimum 9 years without formal degree + Background in 3D CAD modeling + Working knowledge of live entertainment technology + Experience working in a short-term, project-based environment + Success collaborating as part of a cross-functional team + Ability to be based in the Lititz, PA TAIT headquarters **Preferred Experience** + Parametric modeling, ideally using Autodesk Inventor + Building information modeling (BIM) + Design for manufacture (DFM), especially aluminum structures and electro-mechanical machines + Rigging, especially theatrical rigging, arena rigging, performer flying, or catenary systems + TAIT markets, especially concert touring and theme parks + TAIT technology, especially winches, trolleys, and other overhead machinery/structures **Working Conditions and Physical Effort** The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to sit and use hands to finger, handle, or feel objects, tools, or controls. The employee frequently is required to reach with hands and arms and talk or hear. Specific vision abilities required by this job include close vision, color vision, and peripheral vision. The employee regularly operates a computer, including typing, using a mouse or keyboard, and viewing the screen for extended periods. While the role does not require regular lifting or physical exertion, there may be occasional onboarding programs or training opportunities that create opportunities for more exposure to physical tasks or new environments (sites, venues, etc.) **Work conditions of the role are:** + Work conditions may involve moderate exposure to unusual elements such as dirt, dust, fumes, unpleasant odors, and/or loud noises. + Work environment involves some exposure to hazards or physical risks which require following basic safety precautions. + Must be able to wear and properly utilize appropriate personal protective equipment (PPE) to work within or visit areas where required. This includes safety glasses, reflective vest, ear plugs, safety toed shoes, and other PPE as required by the location. \#LI-AW1 TAIT is an equal opportunity employer fully committed to diversity and inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected characteristic as outlined by international, national, state, or local laws.