Senior mechanical engineer jobs in Syracuse, NY - 179 jobs

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology solutions including engineered systems, radio frequency (“RF”) components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards (“PCBs”). TTM stands for time-to-market, representing how TTM's time-critical, one-stop manufacturing services enable customers to shorten the time required to develop new products and bring them to market. Additional information can be found at *********** Compensation: Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $46,010 - $72,726 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

Help us build the future and we'll help you build a rewarding and purposeful career. Our global network is made up of architects, designers, planners, engineers, and environmental scientists all working towards the same goal. Join a team that brings inspirational architecture, landscapes, townscapes and places to our world, and we'll provide you unlimited space to grow. Who are we looking for? Our Northeast Engineering Design Organization (EDO) is actively seeking a skilled Mechanical Designer to work on the design of HVAC and plumbing systems across commercial and industrial facilities throughout the region. In this dynamic role, you'll be involved in every stage of the design process, from initial concept to final project layout, collaborating with multidisciplinary teams to deliver high-performance solutions that meet our clients' evolving needs. This is more than just a design role, it's an opportunity to apply your creativity and problem-solving skills to real-world challenges. You'll play a key part in developing efficient, sustainable building mechanical systems that enhance comfort, safety, and energy performance. Our Hybrid Work Model: Be part of the dynamic culture! Our workplace thrives on a hybrid model, combining in-office collaboration and flexibility. Join us in the office three days a week to contribute, connect and excel in our vibrant environment. Working with an energetic and high performing team, this position offers a variety of work and will see you involved in: Solutions Analysis: Analyze specific problems and issues to find the best solutions. Solutions could be technical or professional in nature. Personal Capability Building: Develop own capabilities by participating in assessment and development planning activities as well as formal and informal training and coaching; gain or maintain external professional accreditation, where relevant, to improve performance and fulfill personal potential. Maintain an understanding of relevant technology, external regulation, and industry best practices through ongoing education, attending conferences, and reading specialist media. Operational Compliance: Identify, within the team, instances of noncompliance with the organization's policies and procedures and/or relevant regulatory codes and codes of conduct, reporting these instances and escalating issues as appropriate. Product and Solution Development: Define and deliver products and services that meet customer needs by selecting the best possible approaches available within established systems. Design and Conceptualization: Produce multiple concepts and prototypes to design digital products/services. Operating Machine or Equipment: Operate complex machines and systems, adjusting processes to optimize quality and productivity. Also responsible for generating solutions to complex inefficiencies. What you'll bring to the team: Associate's degree in Design/Drafting, Mechanical Engineering Technology or related technical field; relevant experience will be considered in lieu of a degree 3-5 years of HVAC and/or plumbing systems design experience for both the private and public sectors; previous consulting experience highly desired Must be familiar with HVAC load calculation software Must have experience with preparing building mechanical system drawings using AutoCAD and/or Revit Highly developed communication skills, both oral and written Proven ability to devise approaches to problem resolution Ability to be proactive and take ownership of the task involved #LI-JK1 Salary Range: $31.00 - $64.00 based on experience and location. As a multicultural organization, we encourage individual achievement and recognize the strength of a diverse workforce. GHD is an equal opportunity employer. We provide equal employment opportunities to all qualified employees and applicants without regard to race, color, religion, genetic information, national origin, sex (including same sex), sexual orientation, gender identity, pregnancy, childbirth, or related medical conditions, age, disability or handicap, citizenship status, service member status, or any other category protected by federal, state, or local law.

Job DescriptionDescription At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. Belonging is a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview The C&S Technical Resources team is seeking a Mechanical/HVAC Drafter and Detailer to join our Sheet Metal team in the Syracuse area. This is a great opportunity for an individual to help grow our construction practice. The Drafter/Detailer will be responsible for assisting in delivery of Mechanical and HVAC services in a multitude of markets including healthcare, higher education, entertainment/hospitality, government, aviation, and industrial projects across the United States. Position Responsibilities Create layout and ductwork shop drawings utilizing Revit models and/or AutoCAD design drawings integrating proposed equipment submittal documentation. Collaborate with architects, engineers and project managers to develop and refine project construction documents including plans, elevations, sections, and details necessary for each project. Coordinate with the other design disciplines (Architects and MEP Engineers) in the delivery of HVAC and Mechanical shop drawing layouts. Create drawings and technical details for internal shop fabrication. Communicate effectively with internal and external team members to ensure project success. Ensure all designs comply with industry standards and project specifications. Familiarity with SMACNA/ANSI/ASHRAE 62.1 design standards is preferred. Utilize safe work practices in accordance with federal, state, local, and company standards. Skills/Education/Experience Associate's degree in Mechanical Technology or a related field. Proficiency in AutoCAD, CADmep, CAMduct, Revit, and other relevant CAD software. Strong understanding of SMACNA/ANSI/ASHRAE codes, standards, and construction methods. Excellent attention to detail and problem-solving skills. Ability to work both independently and as part of a team. Strong communication, organizational, and interpersonal skills Prior experience in Mechanical/HVAC drafting is preferred. Beneficial prior project experience on healthcare, higher education/K-12, entertainment/hospitality, government, aviation, and/or industrial projects Estimated Compensation Range and Benefits $55,000 - $75,000/year* Learn about our comprehensive Benefits *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

We are currently hiring a mid-level Mechanical Engineer in our Building Engineering Division - Energy Infrastructure team in our Syracuse, Elmira, or Ithaca, NY offices. LaBella's Energy Infrastructure team provides comprehensive energy efficiency and renewable energy consultancy, including feasibility analyses, and design of mechanical systems. Our engineers are well-versed in all aspects of building and energy systems design relating to a variety of new construction, renovations, and design/build projects for a variety of clientele. The Mechanical Engineer will work with our engineers in a lead role on a variety of decarbonization/electrification projects to develop projects in feasibility stages all the way through design and construction. A successful candidate will be able to work well in a team, mentor junior engineers, and communicate effectively with clients. Duties Lead design of building HVAC systems and district energy systems Field investigations to document existing conditions Selection and calculations for design purposes Work with Jr Engineers to develop and review project drawings and documentation Interact directly with clients by completing analysis of design options, cost benefit comparisons, and communicating results to assist in decision making process. Ensure compliance with applicable codes, standards, and utility requirements Requirements 8-10 years of relevant experience Bachelor's degree in Mechanical Engineering is preferred Well-rounded experience in HVAC and hydronic system design Preferred: experience designing geothermal or district energy systems Experience with Revit or AutoCAD New York State Professional Engineer's license is a plus Excellent verbal and written communication skills Salary Range: $80,000 - $120,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet-LaBella's benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. Flexible Work Schedule Health/Dental Insurance 401k Plan with Employer Match Short & Long Term Disability Profit Sharing Paid Time Off Leadership Development Program Fitness Reimbursement Tuition Reimbursement Referral Bonus Program Wellness Program Team Building Events Community Service Events

The Product Design Engineering position is a Mechanical Engineer that works to create sold order designs. They may also be tasked with other general work tasks not specifically covered under the Product Design Engineering job description. Requirements Essential Functions of Position: · Provide technical support in the form of design calculations and adherence to project specifications, codes, and standards. · Create and revise CAD drawings, and 3D models for project approval and in-house fabrication. · Work with the project manager to maintain, document, and communicate project schedules. · Communicate daily with internal and external customers. · Create Bill of Materials · Collaborate with multi-disciplinary engineering teams and work with vendors and contractors. · Develop and maintain detailed documentation to track project development and design process. · Perform other duties as assigned. Minimum Qualifications: CAD and Inventor experience Associates degree in relevant field with related work experience. Knowledge of how mechanical systems and processes work. Comfortable working in a fast-paced environment. Exceptional organizational and time management skills Excellence in verbal and written communication and ability to work as part of a team. Preferred Qualifications: Bachelors in mechanical engineering 3-5 years in a manufacturing environment completing Engineering design work 3-5 years working in Inventor or SolidWorks Previous Epicor (ERP) Experience Physical Requirements: Required to sit, stand, and walk; for up to 8 hours per day. Continuous use of the hand, arm, and fingers to operate a computer keyboard, telephone, and other office equipment. Ability to lift up to 20 pounds occasionally. Ability to communicate professionally, in written and oral communications. Job Title: Product Design Engineer Reports To: Product Design Engineering Manager Classification: Exempt Pay Range: Min $73,615- Max $126,500 Salary Description $73,615.00-126,500.00

Senior Mechanical-HVAC Engineer in the Advanced Manufacturing Division of Ramboll. Ramboll is actively seeking a Mechanical Engineer in our Binghamton, NY office. The selected candidate for this position will be expected to work across a wide range of mechanical engineering knowledge areas and have a desired focus area in heating, ventilation, and air conditioning related work. The successful candidate will be responsible for, but not limited to, the following: Performing design and engineering work in various areas of the mechanical discipline. The majority of the work will be related to heating, ventilation and Air Conditioning (HVAC); however, the candidate should also expect work in industrial piping, plumbing, central utility plants, compressed air systems, chilled water systems, steam systems, and fire protection. Coordinating with other engineering disciplines to produce final construction drawings and details associated with mechanical engineering projects. Developing conceptual designs and cost estimates for early stages of the project life cycle. Creating design drawings utilizing Revit 3D design software. Conducting or participating in investigative energy assessments to identify energy and cost savings measures. Assessing and designing building ventilation systems based on requirements for heat removal in industrial spaces and maintaining indoor air quality. Conducting spreadsheet analysis to assess the energy and cost savings of proposed energy conservation measures (ECMs) Utilizing building modeling software (HAP or Trane Trace) to determine envelope heat gains/losses and assess savings potentials of ECMs. Specifying mechanical equipment Designing plumbing and building utility piping systems Summarizing engineering results in written reports and/or presentations that are cohesive and of the highest quality. Visiting job sites as required for projects involving upfit of existing systems. A mix of day trips and overnight domestic trips should be expected. Adhering to the policies and standards set forth in the Ramboll's Project Execution Manual. Promoting and maintaining a safe working environment for all employees by adhering to Ramboll's Health, Safety, and Environmental procedures. Skills & Qualifications: B.S. in Mechanical Engineering or greater 5+ years of experience in engineering and design of HVAC systems Licensed professional engineer strongly preferred Ability to foster a creative engineering environment Strong communication skills, (both in written and verbal) Ability to work across a wide range of areas within the mechanical engineering discipline Strong computer skills in the Microsoft Office suite of programs Experience with AutoCAD and Revit design software preferred Work at the heart of sustainable change with Ramboll in the Americas Ramboll is a global architecture, engineering, and consultancy company. As a foundation-owned people company, founded in Denmark, we believe that the purpose of sustainable change is to create a thriving world for both nature and people. So, that's where we start - and how we work. Our history is rooted in a clear vision of how a responsible company should act and being open and curious is a cornerstone of our culture. Ramboll in the Americas has thousands of experts working across more than 70 offices. Ramboll experts deliver innovative solutions across Environment & Health, Water, Energy, and Planning & Urban Design. Equality, Diversity, and Inclusion Equality, diversity, and inclusion are at the heart of what we do. At Ramboll, we believe that diversity is a strength and that different experiences and perspectives are essential to creating truly sustainable societies. We are committed to providing an inclusive and supportive work environment where everyone is able to flourish and reach their potential. We also know how important it is to achieve the right balance of where, when, and how much you work. At Ramboll, we offer flexibility as part of our positive and inclusive approach to work. We invite applications from candidates of all backgrounds, regardless of age, disability or medical condition, gender identity, marriage and domestic partnership, pregnancy and maternity, race, ancestry, or national origin, religion or belief, sex and sexual orientation, military service and veteran status, or any other protected characteristic. Ramboll wants to ensure opportunities are accessible to candidates with disabilities. So, please let us know if there are any changes we could make to the application process to make it more comfortable for you. You can contact us at [email protected] with such requests. Salary Transparency Statement At Ramboll, your base pay is only part of your overall total compensation package. At the time of this posting, this role is likely to be compensated at an annual rate between $79,000. And $100.000. Actual pay may be more or less than the posted range, depending on numerous factors, including experience, geographical location, internal equity, market conditions, education/training and skill level, and does not include bonuses, overtime, or other forms of compensation or benefits. Additional Information All your information will be kept confidential according to EEO guidelines.

JOB TITLE: (P) Manufacturing Engineer PAY RATE: $40/hour We are a national aerospace and defense staffing agency seeking highly qualified candidates for a position with a top-tier client. Job Details: Job Type: Contract (12 months with potential for extension) Schedule: 4/9/4 (Mon-Thu: 9 hrs, Fri: 4 hrs | 7:00 AM-4:30 PM Mon-Thu, 7:00 AM-11:00 AM Fri) Industry: Aerospace / Defense / Aviation Benefits: Medical, dental, and vision (Cigna) Perks: Bonus potential + Priority access via Tier 1 supplier Openings Nationwide: Thousands of opportunities across the U.S. Qualifying Questions: Are you a U.S. person as defined under ITAR regulations? Do you meet the educational and experience requirements for this role? Can you commute to the job location or relocate if necessary? Summary: Design and improve manufacturing processes and production layouts Collaborate with cross-functional teams to drive projects and initiatives Incorporate inspection and test requirements into production planning Evaluate performance of machinery and tools; identify and implement corrective actions to ensure product quality Provide design input to engineering teams to optimize manufacturability and equipment use Ensure compliance with all relevant regulations and standards Apply Lean Manufacturing principles; Green Belt certification or knowledge preferred Requirements: Bachelor's degree in Manufacturing, Mechanical, or Industrial Engineering At least 1 year of relevant industrial experience; 2-3 years preferred Self-starter with strong initiative and teamwork skills Familiarity with Lean Manufacturing or Six Sigma principles a plus Must be a U.S. Person (as defined by ITAR). About Us: The Structures Company is a premier national aerospace and defense staffing agency specializing in contract, contract-to-hire, and direct hire placements. We deliver expert workforce solutions across engineering, IT, production, maintenance, and support roles. As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. Eligibility Requirements: Must be a U.S. Citizen, lawful permanent resident, or protected individual under 8 U.S.C. 1324b(a)(3) to comply with ITAR regulations. Keywords: aerospace, aviation, engineering, maintenance, aircraft design, defense Take your career to new heights-apply today!

Arcadis is the world's leading company delivering sustainable design, engineering, and consultancy solutions for natural and built assets. We are more than 36,000 people, in over 70 countries, dedicated to improving quality of life. Everyone has an important role to play. With the power of many curious minds, together we can solve the world's most complex challenges and deliver more impact together. Arcadis is seeking a self-starting and experienced Project Civil/Environmental Engineer to support an expanding portfolio of projects throughout the United States. As a Project Engineer you will collaborate with scientists, engineers, project managers, and technical experts on various activities in support of civil design and environmental permitting projects for a diverse project portfolio, including projects in the energy, industrial, and transportation sectors associated with site development, reclamation, and restoration projects. The position will require experience with federal and state environmental permitting. Arcadis provides multiple onboarding and development programs created for our professionals that will expand career growth and help drive creativeness, innovation, and greater integration within our local, national, and global teams. Role Accountabilities: Responsibilities will include working with project managers and team members to develop engineering designs for permitting or construction permits. The candidate should have demonstrated experience with the management of civil or environmental engineering projects, including land development and associated planning, soil and erosion control design, and stormwater permitting. The candidate should also be able to analyze documentation including technical reports, construction submittals, maps, drawings, tests, and aerial photographs to understand site characteristics (e.g., geotechnical properties, terrain, hydrologic and hydraulic characteristics, etc.) to support design development. The candidate will also need to review applicable regulations, permitting requirements, and standards. Based on interpretation of data and regulatory constraints, the candidate will develop civil engineering designs on projects of varying complexity. The candidate will be responsible for producing quality materials within tight timeframes and simultaneously manage several assignments. This role will primarily be office based; however, as needed, you will need to conduct field assignments, including participating in face-to-face client, technical, and other stakeholder meetings. This role will require the ability to travel up to 15%. Additional responsibilities will require the delegation of work and mentorship to junior engineers, participating in and facilitating group meetings, and effectively working with the project team, including local, national, and global technical and client teams. Required Qualifications: Bachelor of Science Degree in Environmental, Chemical, or Civil Engineering or closely related field Successful completion of the Fundamentals of Engineering (FE) exam Minimum 5 years of professional experience Fluent with AutoCAD, Autodesk Civil 3D, or other terrain modeling design software Experience with hydrologic/hydraulic modeling (e.g., HydroCAD, WinTR-55, PondPack, HEC-RAS) Preferred Qualifications: Master of Science in Environmental, Chemical, or Civil Engineering or closely related field OSHA 40-Hour HAZWOPER Training Professional Engineering license(s) Certified Professionals in Erosion and Sediment Control VADEQ-Certified Plan Reviewer and Inspector for Erosion and Sediment Control and/or for Stormwater Management Why Arcadis? We can only achieve our goals when everyone is empowered to be their best. We believe everyone's contribution matters. It's why we are pioneering a skills-based approach, where you can harness your unique experience and expertise to carve your career path and maximize the impact we can make together. You'll do meaningful work, and no matter what role, you'll be helping to deliver sustainable solutions for a more prosperous planet. Make your mark, on your career, your colleagues, your clients, your life and the world around you. Together, we can create a lasting legacy. Join Arcadis. Create a Legacy. Our Commitment to Equality, Diversity, Inclusion & Belonging We want you to be able to bring your best self to work every day which is why we take equality and inclusion seriously and hold ourselves to account for our actions. Our ambition is to be an employer of choice and provide a great place to work for all our people. We are an equal opportunity and affirmative action employer. Women, minorities, people with disabilities and veterans are strongly encouraged to apply. We are dedicated to a policy of non-discrimination in employment on any basis including race, creed, color, religion, national origin, sex, age, disability, marital status, sexual orientation, gender identity, citizenship status, disability, veteran status, or any other basis prohibited by law. Arcadis offers benefits for full time and part time positions. These benefits include medical, dental, and vision, EAP, 401K, STD, LTD, AD&D, life insurance, paid parental leave, reward & recognition program and optional benefits including wellbeing benefits, adoption assistance and tuition reimbursement. We offer nine paid holidays and 15 days PTO that accrue per year. The salary range for this position is $82,400 - $123,600. Actual salaries will vary and are based on several factors, such as experience, education, budget, internal equity, project and location. #LI-SP1 #Hybrid

Unison, a GE Aerospace company, is the leading provider of differentiated engine controls, accessories, and performance monitoring solutions in the Aerospace, Defense & Space segments. Serving both original equipment manufacturers and aftermarket customers, Unison designs, manufactures and supplies the most advanced components and systems in the world. The Project Engineer (PE) leads the Integrated Product Development Team (IPDT) to deliver assigned sensor products through effective cross-functional collaboration. Partnering closely with Electrical and Electromagnetic Design, Mechanical Design/Drafting, Manufacturing, Purchasing, Quality Assurance, and Marketing, the PE coordinates team activities and drives execution across the product lifecycle. This role focuses on New Product Development (NPD) for the sensor products portfolio, leading initiatives for temperature sensors and probes as well as advanced non-temperature-based sensors to meet performance, quality, and schedule objectives. **Job Description** **Roles and Responsibilities** + Overall ownership and accountability of assigned NPD projects from launch through production + Meet all project deliverables and schedule deadlines including hardware, testing, analysis and documentation. + Prepare design & analysis reports and lead design reviews for assigned projects + Act as the primary technical customer point of contact for assigned projects + Review drawings and have a strong understanding of Geometric Dimensioning and Tolerancing (GD&T) + Review all design results to ensure completeness and accuracy + Develop and implement standard design practices from lessons learned + Interpret and clarify customer technical expectations + Work with the Development Team to meet internal unit cost and develop cost targets + Define and maintain technical compliance to customer requirements + Write technical proposals and present technical information to customers + Lead cost reduction efforts and track progress + Resolution of field issues + Factory support + Travel up to 20% Domestic and International **Required Qualifications** + Bachelor's degree in Mechanical, Electrical or Aeronautical Engineering (or high school diploma/GED with at least 4 years of Project Engineering experience) + This role requires use of technical data subject to U.S. Government contract restrictions and this posting is only for U.S. Citizens. GE will require proof of status prior to employment. **Desired Characteristics** + Advanced degree would be a plus + Ability to influence and seamlessly work cross-functionally in a matrix organization + Strong oral and written communication skills. + Strong interpersonal and leadership skills + Ability to communicate with all levels of internal and external customer organizations, including upper management. + Demonstrated ability to analyze and resolve problems. Ability to document, plan, market, and execute programs. Established project management skills. The base pay range for this position is $72,000 - $85,000. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/commission based on the plan. This posting is expected to close on March 6, 2026. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time -off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or prog rams (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** Yes GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology solutions including engineered systems, radio frequency (“RF”) components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards (“PCBs”). TTM stands for time-to-market, representing how TTM's time-critical, one-stop manufacturing services enable customers to shorten the time required to develop new products and bring them to market. Additional information can be found at *********** Scope : Utilize and enhance analysis tools. Conduct testing as defined by Mechanical Engineers. Duties and Responsibilities : Use LabVIEW & Matlab to control a test system and the collection and analysis of data. Enhance testing using LabView and Matlab programming and by implementing new design elements. Create software routines used for quality control. Enhance image analysis techniques Responsible for other laboratory duties. Perform thermal finite element analyses (FEA). Essential Knowledge and Skills : Enrolled in Mechanical Engineering program Must have completed the following courses: All core Mech Eng Courses Experimental Analysis LabVIEW programing Matlab programming Desired to have completed the following courses: Heat Transfer Thermodynamics Fluid Mechanics Machine Design Numerical Analysis / Finite Element Analysis Statics Good interpersonal and cooperation skills Computer skills needed: LabVIEW, Matlab, Programming (C#, Java, SQL, C++, or other), MS Office, 3D CAD (Solidworks or Inventor), FEA (ANSYS, Solidworks, etc) Have the ability to work independently Education and Experience : Enrolled in Mechanical Engineering program Compensation: Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $46,010 - $72,726 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology solutions including engineered systems, radio frequency ("RF") components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards ("PCBs"). TTM stands for time-to-market, representing how TTM's time-critical, one-stop manufacturing services enable customers to shorten the time required to develop new products and bring them to market. Additional information can be found at *********** * Scope: Utilize and enhance analysis tools. Conduct testing as defined by Mechanical Engineers. Duties and Responsibilities: * Use LabVIEW & Matlab to control a test system and the collection and analysis of data. * Enhance testing using LabView and Matlab programming and by implementing new design elements. * Create software routines used for quality control. * Enhance image analysis techniques * Responsible for other laboratory duties. * Perform thermal finite element analyses (FEA). * Essential Knowledge and Skills: * Enrolled in Mechanical Engineering program * Must have completed the following courses: * All core Mech Eng Courses * Experimental Analysis * LabVIEW programing * Matlab programming * Desired to have completed the following courses: * Heat Transfer * Thermodynamics * Fluid Mechanics * Machine Design * Numerical Analysis / Finite Element Analysis * Statics * Good interpersonal and cooperation skills * Computer skills needed: LabVIEW, Matlab, Programming (C#, Java, SQL, C++, or other), MS Office, 3D CAD (Solidworks or Inventor), FEA (ANSYS, Solidworks, etc) * Have the ability to work independently * Education and Experience: * Enrolled in Mechanical Engineering program Compensation: Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $46,010 - $72,726 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

We are currently hiring a mid-level Mechanical Engineer in our Building Engineering Division - Energy Infrastructure team in our Syracuse, Elmira, or Ithaca, NY offices. LaBella's Energy Infrastructure team provides comprehensive energy efficiency and renewable energy consultancy, including feasibility analyses, and design of mechanical systems. Our engineers are well-versed in all aspects of building and energy systems design relating to a variety of new construction, renovations, and design/build projects for a variety of clientele. The Mechanical Engineer will work with our engineers in a lead role on a variety of decarbonization/electrification projects to develop projects in feasibility stages all the way through design and construction. A successful candidate will be able to work well in a team, mentor junior engineers, and communicate effectively with clients. Duties * Lead design of building HVAC systems and district energy systems * Field investigations to document existing conditions * Selection and calculations for design purposes * Work with Jr Engineers to develop and review project drawings and documentation * Interact directly with clients by completing analysis of design options, cost benefit comparisons, and communicating results to assist in decision making process. * Ensure compliance with applicable codes, standards, and utility requirements

The Product Design Engineering position is a Mechanical Engineer that works to create sold order designs. They may also be tasked with other general work tasks not specifically covered under the Product Design Engineering job description. Requirements Essential Functions of Position: * Provide technical support in the form of design calculations and adherence to project specifications, codes, and standards. * Create and revise CAD drawings, and 3D models for project approval and in-house fabrication. * Work with the project manager to maintain, document, and communicate project schedules. * Communicate daily with internal and external customers. * Create Bill of Materials * Collaborate with multi-disciplinary engineering teams and work with vendors and contractors. * Develop and maintain detailed documentation to track project development and design process. * Perform other duties as assigned. Minimum Qualifications: * CAD and Inventor experience * Associates degree in relevant field with related work experience. * Knowledge of how mechanical systems and processes work. * Comfortable working in a fast-paced environment. * Exceptional organizational and time management skills * Excellence in verbal and written communication and ability to work as part of a team. Preferred Qualifications: * Bachelors in mechanical engineering * 3-5 years in a manufacturing environment completing Engineering design work * 3-5 years working in Inventor or SolidWorks * Previous Epicor (ERP) Experience Physical Requirements: * Required to sit, stand, and walk; for up to 8 hours per day. * Continuous use of the hand, arm, and fingers to operate a computer keyboard, telephone, and other office equipment. * Ability to lift up to 20 pounds occasionally. * Ability to communicate professionally, in written and oral communications. Job Title: Product Design Engineer Reports To: Product Design Engineering Manager Classification: Exempt Pay Range: Min $73,615- Max $126,500

Welcome to our Energy division Ramboll is at the forefront of addressing the green transition and offers a holistic approach to energy that supports the sector on the journey towards more sustainable solutions. With 1,581 experts in 15 countries, covering the full spectrum of technologies and all parts of the value chain, we plan, design, and implement energy solutions all over the world. Ramboll in Americas Ramboll has 2,000 experts working across 72 offices in the Americas applying their passion to deliver innovative solutions within Environment & Health, Water, Energy and Planning & Urban design. Founded in Denmark, Ramboll is a people company. We invite you to contribute to a sustainable future working in an open, collaborative, and empowering culture. Job Description Your New Role Our group's projects include the design of HVAC and utility systems of varying complexity. Project types include, but are not limited to, the following: Manufacturing (pharmaceuticals, aerospace, food & beverage, chemicals). Pharmaceutical (ISO class manufacturing spaces, Wet & Dry labs, offices) Wastewater Treatment (pump stations, screening buildings, chemical treatment buildings, wet/dry wells, industrial wastewater treatment plants) Commercial (offices, warehouses) Higher Education (central plants, thermal distribution systems, building level HVAC) Your key tasks and responsibilities will be: Coordinate with other engineering disciplines to produce final construction drawings and details associated with multidisciplinary engineering projects. Perform engineering design concept development and calculations on complex and unique mechanical designs including, HVAC, process piping, plumbing, and minor aspects of fire protection and plumbing. Prepare project drawings and specifications. Demonstrate a understanding of heating and cooling mechanical systems (chilled water, hydronic hot water, and steam) as well as HVAC systems. Perform technical reviews and coordination with other trades on the project. Conducting on-site fieldwork as required to develop a comprehensive package of contract documents (drawings and specifications) Interface with clients and represent Ramboll by adhering to our values. Qualifications About You 3 years of experience minimum in the consulting industry. B.S. (or higher) in Mechanical Engineering Ability to foster a creative engineering environment Strong communication skills, (both written and verbal) Ability to work across a wide range of areas within the mechanical engineering discipline Ability and desire to obtain professional registration (FE and PE) Strong computer skills in the Microsoft Office suite of programs Proven experience in Revit MEP preferred Proficiency in other engineer software proffered; to include HAP, Pipeflow, Caesar, Trane Trace. Personal qualities that will help you succeed in this role include: ability to effectively lead a team, balance scope, schedule, and budgets, proactively plan and execute a project, and the ability to effectively communicate both internally and externally. Additional Information All your information will be kept confidential according to EEO guidelines.

The importance of water to the health of our world can't be overstated. As the frequency and intensity of floods, droughts and storms increases, the water industry must continue to build resiliency and lead from the front. Together with our clients, we are thinking and doing things differently to help pre-empt and prepare for what's next. Be a part of this dynamic and committed team of diverse water specialists and drive change for your community. You'll be able to apply our powerful global network of skills and decades of experience to create positive water outcomes that respect nature and nurture communities. Who are we looking for? Our Northeast Water business is expanding, and we're excited to welcome several talented Project Engineers to our offices in Syracuse and Buffalo, NY. This is your opportunity to make a meaningful impact on water, wastewater, utility, and infrastructure design projects that shape communities across the region. As a Project Engineer, you'll play a key role in delivering innovative solutions alongside a dynamic, multi-disciplinary team. In this role, you will assist with preparing technical reports, design drawings, contract documents, cost estimates, and permits. You'll lead and support client workshops focused on advancing technical studies and designs, while also developing project delivery strategies and job management plans to ensure compliance with QA standards. Your work will involve supporting pricing, estimating, scoping, and marketing strategies for new projects, as well as coordinating CAD teams to produce high-quality design and construction documents. You'll conduct field investigations and condition assessments to identify process improvements, manage communication on technical and contractual issues, and facilitate client meetings to keep projects on track. This is more than just a job-it's a chance to grow your career while contributing to sustainable water solutions that matter. If you're passionate about engineering excellence and ready to take on challenging, rewarding projects, we'd love to hear from you! Our Hybrid Work Model: Be part of the dynamic culture! Our workplace thrives on a hybrid model, combining in-office collaboration and flexibility. Join us in the office three days a week to contribute, connect and excel in our vibrant environment. Working with an energetic and high performing team, this position offers a variety of work and will see you involved in: Engineering Drawings: Create engineering drawings to support the communication, evaluation, and implementation of engineering solutions. Engineering Solutions Design: Contribute to the design of engineering solutions; design the feasibility testing approach and supervise its implementation to support the development and validation of engineering solutions. Personal Capability Building: Develop own capabilities by participating in assessment and development planning activities as well as formal and informal training and coaching; gain or maintain external professional accreditation, where relevant, to improve performance and fulfill personal potential. Maintain an understanding of relevant technology, external regulation, and industry best practices through ongoing education, attending conferences, and reading specialist media. Technical Developments Recommendation: Research and suggest technical developments to improve the quality of the website/portal/software and supporting infrastructure to better meet users' needs. Product and Solution Development: Define and deliver products and services that meet customer needs by selecting the best possible approaches available within established systems. Project Management: Work within an established project management plan to achieve specific goals. Research: Carry out a range of research activities either to support others or to fulfill the requirements of the role. Technical Troubleshooting: Support technical troubleshooting efforts, aiding in the quick and accurate identification, analysis, and resolution of technical issues with equipment and experiments. What you will bring to the team: Bachelor's and/or Master's degree in Civil or Environmental Engineering EIT certification At least 3-5 years of municipal water experience including experience in the state of New York; prior water and wastewater infrastructure design experience with local municipalities a plus Interested in joining our Water team? Apply today! Salary range: $72,300 - $120,500 based on experience #LI-JK1 As a multicultural organization, we encourage individual achievement and recognize the strength of a diverse workforce. GHD is an equal opportunity employer. We provide equal employment opportunities to all qualified employees and applicants without regard to race, color, religion, genetic information, national origin, sex (including same sex), sexual orientation, gender identity, pregnancy, childbirth, or related medical conditions, age, disability or handicap, citizenship status, service member status, or any other category protected by federal, state, or local law.

Are you ready to see your future take flight? At GE Aerospace, we believe the world works better when it flies. We are a world-leading provider of jet engines, components, and integrated systems for commercial and military aircraft. We have a relentless dedication to the future of safe and more sustainable flight and believe in our talented people to make it happen. **Job Description** Job Summary Help invent the future of flight, lift people up, and bring them home safely as a GE Aerospace intern! The Manufacturing Engineering internship offers a distinct role based on your major and field of interest: **Manufacturing Engineering Internship:** In this role you will build a strong technical foundation in manufacturing and assembly processes. This may include key manufacturing, new product integration, new technology integration, continuous improvement, and cost out. This internship is a great first step for those interested in our MEDP or OMLP program after graduation. Essential Responsibilities Our Manufacturing and Supply Chain organizations combine passionate people, cutting-edge technology, and a culture of continuous improvement to provide the highest quality products to our customers. Members of our team are part of a fast-paced and dynamic environment. They typically have the benefit of getting hands-on experience with our products. In either internship experience, you'll be expected to: + Learn and understand state-of-the-art methods of manufacturing, + Support manufacturing and repair processes for component hardware and/or overall engine assembly, + Maintain high-quality standards via risk assessment, root cause analysis, corrective action, and the application of statistical controls + Ensure safe work conditions via Environmental, Health & Safety (EHS) initiatives + Learn and apply Lean and Six Sigma principles to drive productivity, on-time delivery, process capability, and stable operations in our increasingly complex and demanding environment + Supporting delivery efforts for sourced components by working with our shops and suppliers while building project management skills, negotiation skills, and business acumen Qualifications/Requirements: + Minimum 3.0 cumulative G.P.A. on a 4.0 scale without rounding + Attending a full-time registered and nationally accredited bachelor or graduate program (accepted majors are listed below) + Willingness and ability to work in any of the 35+ GE Aerospace U.S. locations + Reliable transportation, as many of our sites do not have public transportation available Degrees accepted: + Aeronautical/Aerospace Engineering + Ceramic Engineering + Chemical Engineering + Civil Engineering + Computer Engineering + Computer Science + Electrical Engineering / Electrical & Computer Engineering + Engineering Technology (various) + Fiber/Polymer Science + Industrial Engineering + Manufacturing Engineering + Materials Science/Engineering + Mechanical Engineering + Systems Engineering + Welding Engineering Or any relevant or similar major to the ones above Eligibility Requirements: Any offer of employment is conditioned upon the successful completion of a background investigation and drug screen. Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening. Desired characteristics: + Humble: respectful, receptive, agile, eager to learn + Transparent: shares critical information, speaks with honesty, contributes constructively + Focused: quick learner, strategically prioritizes work, committed, and takes initiative + Leadership ability: strong communicator, decision-maker, collaborative teamwork + Problem solver: analytical-minded, challenges existing processes, critical thinker + Comfortable working in a fast-paced shop floor environment around various machine tools and equipment + Preference will be given to those with prior internship, co-op or military experience in manufacturing/supply chain or engineering + Demonstrated commitment to community and/or university involvement Benefits: Pay rates for this position begin at $20/hour and increase for each undergraduate year completed. Relocation support and housing assistance is available for those who relocate to a new city. Equal Opportunity Employer: _GE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is an_ Equal Opportunity Employer (******************************************************************************************************************************************************** _._ _Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law._ _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** Yes GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Description: The Product Design Engineering position is a Mechanical Engineer that works to create sold order designs. They may also be tasked with other general work tasks not specifically covered under the Product Design Engineering job description. Requirements: Essential Functions of Position: · Provide technical support in the form of design calculations and adherence to project specifications, codes, and standards. · Create and revise CAD drawings, and 3D models for project approval and in-house fabrication. · Work with the project manager to maintain, document, and communicate project schedules. · Communicate daily with internal and external customers. · Create Bill of Materials · Collaborate with multi-disciplinary engineering teams and work with vendors and contractors. · Develop and maintain detailed documentation to track project development and design process. · Perform other duties as assigned. Minimum Qualifications: CAD and Inventor experience Associates degree in relevant field with related work experience. Knowledge of how mechanical systems and processes work. Comfortable working in a fast-paced environment. Exceptional organizational and time management skills Excellence in verbal and written communication and ability to work as part of a team. Preferred Qualifications: Bachelors in mechanical engineering 3-5 years in a manufacturing environment completing Engineering design work 3-5 years working in Inventor or SolidWorks Previous Epicor (ERP) Experience Physical Requirements: Required to sit, stand, and walk; for up to 8 hours per day. Continuous use of the hand, arm, and fingers to operate a computer keyboard, telephone, and other office equipment. Ability to lift up to 20 pounds occasionally. Ability to communicate professionally, in written and oral communications. Job Title: Product Design Engineer Reports To: Product Design Engineering Manager Classification: Exempt Pay Range: Min $73,615- Max $126,500

Mechanical Engineer Liverpool, NY Are you looking for a challenging position where you can work directly with clients across various industries to solve their critical manufacturing problems? We strive to help our clients improve their operations, i.e., reduce cycle time, eliminate waste, and keep processes sustainable, etc. We are looking for a motivated, open minded, enthusiastic individual to join our Solutions for Industry engineering team. An ideal candidate will be a creative, results driven, dedicated professional willing to take initiative, communicate effectively across functional teams and lead project engineering success across the entire project lifecycle. Join our Solutions for Industry team and grow with our talented, driven professionals on unique and challenging projects. When you start with us, you'll be joining a company that strives to make a difference, for our employees, clients, and societies. Day to Day: At our manufacturing facility, engineering and production work to co-create engineered systems for some of the world's leading aerospace, specialty casting and forging, environmental, and automation clients. Concept tests and live simulations are carried out at our 100,000 sq ft facility during Factory Acceptance Tests (FAT). During FAT Ramboll Engineers get hands on experience testing industrial equipment in real life scenarios. Not only will you work alongside experts in industrial process controls and automation, but you will also affect positive change towards the newest technologies and manufacturing innovations. Ramboll engineers use the latest 3D Computer Aided Design (CAD) and simulation software to create custom, engineered solutions to support clients across our various business units. Our engineers also routinely work hands-on alongside a team of experienced fabricators/welders throughout the manufacturing process. In addition to client project support, our engineers advance their careers and capabilities with access to our Advanced Manufacturing Technology & Innovation Center. This ever-changing laboratory space allows Ramboll engineers to utilize many new and growing technologies, such as Augmented and Virtual Reality (AR/VR), robotics, process simulation and 3D printing technologies to fuel our solution development and streamlining design innovations. Our engineers actively utilize this space and contribute to its growth and expansion. Job Description Responsibilities: Engineering design, modeling and drafting for all stages of our engineering, procurement, construction, installation, and commissioning projects within our Solutions for Industry division in Ramboll Energy. Development of process & instrumentation (P&ID) diagrams, general arrangement, assembly and detailed fabrication drawings. Development of component specifications and procurement support throughout project lifecycle. Collaboration across all parts of the business including sales, marketing, manufacturing, commissioning, and various technical disciplines. Support both consulting with clients and direct engineering support for manufacturing. Apply lean principles to continuous improvement projects and processes. Able to multi-task and set priorities based on project management direction. Develop and maintain project documents in accordance with standard processes i.e., engineering design deliverables, operations & maintenance manuals, testing and inspection reports, etc. Travel to vendor and client facilities, providing onsite engineering support throughout project lifecycle This position requires approximately 20% to 25% travel. Qualifications Qualifications: B.S. or greater in mechanical, electro-mechanical, industrial, or chemical engineering disciplines. Years of experience may offset education requirements. 6+ years of experience with system design and operation, including but not limited to, mechanical, hydraulic, pneumatic, and electrical systems. 6+ years of experience with design for manufacturing. 6+ years of experience with design and drafting for machining GD&T Geometric Dimensioning & Tolerancing. Proficient in use of engineering software including but not limited to: Parametric modeling software (Autodesk Inventor and Solidworks preferred) Data Management software (Autodesk Vault, Solidworks PDM preferred) Additional Information Work at the heart of sustainable change Ramboll is a global architecture, engineering, and consultancy company. We believe that the purpose of sustainable change is to create a thriving world for both nature and people. So, that's where we start - and how we work. At Ramboll, our core strength is our people, and our history is rooted in a clear vision of how a responsible company should act. Being open and curious is a cornerstone of our culture. We embrace an inclusive mindset that looks for fresh, diverse, and innovative perspectives. We respect, embrace, and invite diversity in all forms to actively cultivate an environment where everyone can flourish and realize their full potential. Ready to join us? Please submit your application. Be sure to include all relevant documents including your CV, cover letter, etc. Thank you for taking the time to apply! We look forward to receiving your application. Ramboll in the Americas Founded in Denmark, Ramboll is a foundation-owned people company. Ramboll has thousands of experts working across more than 70 offices in the Americas, delivering innovative solutions within Environment & Health, Water, Energy, and Planning & Urban Design. We invite you to contribute to a sustainable future working in an open, collaborative, and empowering company. Combining local experience with global knowledge, we together shape the societies of tomorrow. Where People Flourish Our mission is to create sustainable societies where people and nature flourish. This means that a culture of inclusion is embedded in everything we do. Our people bring diverse backgrounds and experiences to the company, enabling us to deliver innovative and forward-thinking solutions to our clients. We also know how important it is to achieve the right balance of where, when, and how much you work. At Ramboll, we offer flexibility as part of our positive and inclusive approach to work. We are committed to equal employment opportunity, regardless of age, disability or medical condition, gender identity, marriage and domestic partnership, pregnancy and maternity, race, ancestry, or national origin, religion or belief, sex and sexual orientation, military service and veteran status, or any other protected characteristic. Ramboll wants to ensure opportunities are accessible to candidates with disabilities. So, please let us know if there are any changes we could make to the application process to make it more comfortable for you. You can contact us at [email protected] with such requests. Salary Transparency Our compensation reflects the cost of labor across several U.S. geographic markets, and we pay differently based on those defined markets. The U.S. pay range for this position is $82,000-$102,000 annually and does not include bonuses, overtime or other forms of compensation or benefits. Pay within this range varies by work location and may also depend on job-related knowledge, skills, and experience. Your recruiter can share more about the specific salary range for the job location during the hiring process. All your information will be kept confidential according to EEO guidelines.

Are you ready to see your future take flight? At GE Aerospace, we believe the world works better when it flies. We are a world-leading provider of jet engines, components, and integrated systems for commercial and military aircraft. We have a relentless dedication to the future of safe and more sustainable flight and believe in our talented people to make it happen. Job Description Job Summary Help invent the future of flight, lift people up, and bring them home safely as a GE Aerospace intern! The Manufacturing Engineering internship offers a distinct role based on your major and field of interest: Manufacturing Engineering Internship: In this role you will build a strong technical foundation in manufacturing and assembly processes. This may include key manufacturing, new product integration, new technology integration, continuous improvement, and cost out. This internship is a great first step for those interested in our MEDP or OMLP program after graduation. Essential Responsibilities Our Manufacturing and Supply Chain organizations combine passionate people, cutting-edge technology, and a culture of continuous improvement to provide the highest quality products to our customers. Members of our team are part of a fast-paced and dynamic environment. They typically have the benefit of getting hands-on experience with our products. In either internship experience, you'll be expected to: * Learn and understand state-of-the-art methods of manufacturing, * Support manufacturing and repair processes for component hardware and/or overall engine assembly, * Maintain high-quality standards via risk assessment, root cause analysis, corrective action, and the application of statistical controls * Ensure safe work conditions via Environmental, Health & Safety (EHS) initiatives * Learn and apply Lean and Six Sigma principles to drive productivity, on-time delivery, process capability, and stable operations in our increasingly complex and demanding environment * Supporting delivery efforts for sourced components by working with our shops and suppliers while building project management skills, negotiation skills, and business acumen Qualifications/Requirements: * Minimum 3.0 cumulative G.P.A. on a 4.0 scale without rounding * Attending a full-time registered and nationally accredited bachelor or graduate program (accepted majors are listed below) * Willingness and ability to work in any of the 35+ GE Aerospace U.S. locations * Reliable transportation, as many of our sites do not have public transportation available Degrees accepted: * Aeronautical/Aerospace Engineering * Ceramic Engineering * Chemical Engineering * Civil Engineering * Computer Engineering * Computer Science * Electrical Engineering / Electrical & Computer Engineering * Engineering Technology (various) * Fiber/Polymer Science * Industrial Engineering * Manufacturing Engineering * Materials Science/Engineering * Mechanical Engineering * Systems Engineering * Welding Engineering Or any relevant or similar major to the ones above Eligibility Requirements: Any offer of employment is conditioned upon the successful completion of a background investigation and drug screen. Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening. Desired characteristics: * Humble: respectful, receptive, agile, eager to learn * Transparent: shares critical information, speaks with honesty, contributes constructively * Focused: quick learner, strategically prioritizes work, committed, and takes initiative * Leadership ability: strong communicator, decision-maker, collaborative teamwork * Problem solver: analytical-minded, challenges existing processes, critical thinker * Comfortable working in a fast-paced shop floor environment around various machine tools and equipment * Preference will be given to those with prior internship, co-op or military experience in manufacturing/supply chain or engineering * Demonstrated commitment to community and/or university involvement Benefits: Pay rates for this position begin at $20/hour and increase for each undergraduate year completed. Relocation support and housing assistance is available for those who relocate to a new city. Equal Opportunity Employer: GE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes