Sherwin-Williams jobs in Evansville, IN - 168833 jobs

ESSENTIAL DUTIES AND RESPONSIBILITIES Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, lift gates, etc.). Perform preventative maintenance within DOT standards. Receive road calls, assign third party vendor, and work with business partners on plan of action. Maintain a clean and safe work environment in compliance with workplace safety rules/regulations and government guidelines. Utilize fleet maintenance software system tablet to fully document equipment repair and parts used. Backup to other maintenance shop personnel. Willingness and capacity to assume increased responsibility and certificates. Other duties as assigned by manager. SUPERVISION: N/A RELATIONSHIPS Internal: All Fleet Technicians, Drivers, Coordinators and Manager External: Vendor service providers when required WORK ENVIRONMENT Onsite: The associate in this role is expected to perform assigned responsibilities inside a US Foods maintenance facility. Must be willing to work in extreme temperatures and weather conditions. MINIMUM QUALIFICATIONS Must have 3 years of verifiable hands-on experience as a heavy-duty commercial diesel mechanic. Diagnostic and troubleshooting competency relating to equipment repairs. Successfully demonstrated independent analytical and problem-solving skills. Prior experience in administering appropriate PM program. Must furnish own personal hand tools. Able to read and write legibly (e.g., to attend trainings, hold conversations, receive safety and job-related coaching, and enter information on reports if needed); basic mathematical skills (add, subtract, divide). EDUCATION High school diploma or equivalent required. CERTIFICATIONS/TRAINING N/A LICENSES Must possess a valid driver's license. PREFERRED QUALIFICATIONS Valid Class-A CDL license and DOT certification Experience using fleet maintenance software Welding ability PHYSICAL QUALIFICATIONS OCCASIONALLY: 1% - 33 / FREQUENTLY: 34% - 66% / CONTINUOUSLY: 67% - 100% or NEVER JOB REQUIRES WORKER TO: FREQUENCY: STAND: CONTINUOUSLY WALK: CONTINUOUSLY DRIVE VEHICLE: FREQUENTLY SIT: FREQUENTLY LIFT 1-10 lbs (Sedentary): FREQUENTLY 11-20 lbs (Light): FREQUENTLY 21-50 lbs (Medium): FREQUENTLY 51-100 lbs (Heavy): FREQUENTLY Over 100 lbs (Very Heavy): OCCASIONALLY CARRY 1-10 lbs (Sedentary): FREQUENTLY 11-20 lbs (Light): FREQUENTLY 21-50 lbs (Medium): FREQUENTLY 51-100 lbs (Heavy): OCCASIONALLY Over 100 lbs (Very Heavy): OCCASIONALLY PUSH/PULL 1: FREQUENTLY CLIMB/BALANCE 2: FREQUENTLY STOOP/SQUAT: FREQUENTLY KNEEL: FREQUENTLY BEND: FREQUENTLY REACH ABOVE SHOULDER: FREQUENTLY TWIST: FREQUENTLY GRASP OBJECTS 3: FREQUENTLY MANIPULATE OBJECTS 4: FREQUENTLY MANUAL DEXTERITY 5: FREQUENTLY 1 (Push/Pull: Hand truck, gate, straps, metal ramp, truck door, dolly, boxes, truck gear shift) 2 (Climb/Balance: In/Out Truck/Trailer to cab. On/Off ramp to ground level and side doorsteps and Platform of trailer. Stairs) 3 (Grasp Objects: Hand truck, boxes, cartons, steering wheel) 4 (Manipulate Objects: Boxes, dolly, metal truck ramp, hand truck, paperwork, truck gate, straps) 5 (Manual Dexterity: Typing, use of office machines such as copiers, printers) Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $33-$36per hour. This role will also receive overtime compensation Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Engineering Pay Range: Min: 63,800 - Mid - 88,800 Bonus Plan:Profit SharingProfit Sharing % Req ID: 27257 What You Will Do As an Electrical Engineer, you will collaborate in a team environment to design and support industrial electrical systems, which includes various types of equipment new and old. Specific responsibilities include: Engineer solutions to improve equipment reliability, safety, ergonomics, and compliance with ISO 14001, ISO 450001, and other EHS initiatives. Provide technical support to Production, Maintenance, and IT departments, reducing downtime and improving system performance. Develop, design, and update PLC, VFD, and HMI programs using various control automation platforms, including Rockwell, Siemens, and Beijer. Update and maintain National Instruments LabVIEW code for testing applications and equipment. Interface with engineering, manufacturing, maintenance, IT, MES, and Production teams to support facility projects. Apply NEC knowledge for planning industrial equipment installations and work with electricians to update documentation. Supply project leaders with capital cost estimates and timelines, and review capital equipment quotations. Lead projects or project steps, solve complex problems, and act as a resource for colleagues with less experience. Manage outside engineering and construction personnel, ensuring all safety, health, environmental, and compliance aspects meet regulations. Integrate equipment into data collection systems and establish network topologies. Support network backup, device patching management, and control system asset inventory. Compile data from connected devices for organizational use and develop standards for control systems hardware and software. Identify and assume additional responsibilities for projects and processes that align with and drive towards Lincoln Electric Company's 2025 Higher Standard Goals. Education and Experience Requirements This position is posted as a range, candidates with varying levels of experience and qualifications are encouraged to apply. Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experience. Minimum requirements, Engineer II - Bachelor's degree in electrical engineering with 3+ years of professional relevant engineering experience. Experienced Professional - Has working knowledge and experience in own discipline Continues to build knowledge of the organization, processes and customers Performs a range of mainly straightforward assignments Uses prescribed guidelines or policies to analyze and resolve problems Receives a moderate level of guidance and direction Engineer III - bachelor's degree in electrical engineering with 5+ years of professional relevant engineering experience Senior "Go To" / Career Level Person - Has in-depth knowledge in own discipline and basic knowledge of related disciplines Solves complex problems; takes a new perspective on existing solutions Works independently; receives minimal guidance May lead projects or project steps within a broader project or have accountability for ongoing activities or objectives Acts as a resource for colleagues with less experience May represent the level at which career may stabilize for many years Engineer IV - bachelor's degree in electrical engineering with 8+ years of professional relevant engineering experience. Lead/Specialist - Is recognized as an expert in own area within the organization Has specialized depth and/or breadth of expertise in own discipline or function Interprets internal or external issues and recommends solutions/best practices Solves complex problems; takes a broad perspective to identify solutions May lead functional teams or projects Works independently, with guidance in only the most complex situations Experience Experience with AutoCAD Electrical CAD software. Experience with PLCs, HMIs, VFDs, and test equipment, including Rockwell Automation software, Siemens software, and National Instruments LabVIEW. Knowledge of NFPA 70, 70E, and 79, and other technical codes. Knowledge of basic networking concepts and SQL Database. Skills Demonstrate initiative and accept responsibilities with minimal supervision. Strong ownership and results-driven mindset. Good judgment, self-motivation, and safety consciousness. Excellent organizational skills. Superior written and oral communication abilities. Adaptability to handle diverse assignments and changing priorities. Hands-on work capability and effective collaboration on the shop floor. Critical thinking and exceptional problem-solving skills. Proficiency in supporting and troubleshooting industrial equipment. Flexibility to work off shifts, travel between facilities in Northeast Ohio, and as required. Effective teamwork with employees at all organizational levels. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Req ID: 27882 Purpose To provide technical and process support for PC Board manufacturing operations. Job Duties and Responsibilities Provides technical and process support related to PC Board production, prototype, and process development. Uses schematics, diagrams, written and verbal descriptions or defined plans to perform testing and troubleshooting on electronic or mechanical components, equipment or systems. Gathers, maintains, formats, compiles and manipulates technical data using established formulae and procedures and performs detailed mathematical calculations. Address concerns reported through employee suggestion and near-miss systems. Encouraged to initiate changes for continuous product and process improvement. Basic Requirements Minimum of a high school education or GED is required. Minimum 5 years of work experience or Associate Degree in related field. Rotational availability between 1st and 2nd shift is preferred. Has full proficiency in a range of technical processes or procedures (or deep skills in a single area) through job-related training and considerable work experience Completes a variety of atypical assignments Works within defined technical processes and procedures or methodologies and may help determine the appropriate approach for new assignments Works with a limited degree of supervision, with oversight focused only on complex new assignments Acts as an informal resource for colleagues with less experience Effective written and oral communication skills. Strong desire to take ownership and drive results. Ability to analyze data to drive decision making. Good organizational skills and computer skills. Proficient in the use of MS Office including but not limited to Word, Excel, PowerPoint. On an as needed basis, train, assist and observe other department personnel (as qualified) on the department equipment and/or process for improvements such as but not limited to safety, quality, ISO 14001 & 45001 and manufacturing proficiency/efficiency. Environmental Health & Safety (EHS) Understand the Company's EHS Policy and how it relates to this job. Be aware of OSHA and EPA laws and regulations as well as the Company's Plant Rules and Regulations that pertain to this job. Work in a safe manner and observe all company EHS and JHA procedures. Follow safe equipment operating procedures and only operate equipment when guards are in place and in good condition. Know that the company EHS procedures are contained in reference books such as SSW Specifications, Plant Rules and Regulations. Safety Data Sheets are stored electronically and available 24/7. In an emergency SDS may be accessed at Security. Immediately notify the Supervisor if there is any safety hazard, any equipment not operating correctly, or if there are any questions regarding EHS and JHA procedures. Personal Protective Equipment: See Department PPE Chart Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Bettendorf Employment Status: Hourly Full-Time Function: Manufacturing Pay Range: ($21/hr - $31.25/hr) Target Bonus: 5.0% Req ID: 27686 Summary Lincoln Electric Automation is seeking a Quality Technician for our Bettendorf, IA location to perform in-process and final inspections, maintain quality standards, and support continuous improvement within a fast-paced automation environment. This role ensures that assemblies, weldments, and tooling meet engineering and customer requirements. In addition to competitive pay, Lincoln Electric offers an annual bonus program, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, paid time off and many more outstanding benefits! Responsibilities Perform in-process and final inspections on assemblies, weldments, and fabricated components. Maintain and calibrate inspection and measuring equipment. Identify and document nonconformities; assist in corrective actions. Work with engineering and fabrication teams to resolve quality issues. Provide feedback to improve workflow, documentation, and process efficiency. Complete inspection reports and quality documentation. Support assembly, fit-up, hydraulic line plumbing, and customer run-off. Assist with field start-up and customer training as needed (overnight travel required). Maintain a clean, safe, and organized work area. Required Education & Experience High school diploma or GED required; technical training preferred. Proficient in reading blueprints and GD&T. Strong attention to detail and organizational skills. Proficient with Microsoft Office (Excel, Word, PowerPoint). Experience with CMM systems (Leica, Faro Arm) and PolyWorks preferred. Knowledge of manufacturing equipment, inspection tools, and procedures. Ability to operate forklifts and overhead cranes safely. Effective communication and teamwork skills. Physical Demands and Work Environment The physical demands and work environment characteristics described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical demands: While performing duties of job, employee is typically required to stand; walk; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; balance; stoop; bend; squat; climb; see, talk and hear. Be able to climb ladders; lift hand tools up to 40 lbs. consistently, and parts up to 50 lbs. consistently. Repetition with activity. Specific vision abilities required by the job include close vision, distance vision, depth perception and the ability to adjust focus. Work environment: The noise level in the work environment is usually moderate. Shift: Full time, Monday-Friday (7am-3:30pm), overtime as needed. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Research & Development Req ID: 27300 Purpose To design, develop and evaluate welding machines and associated processes; to conduct applied research into new areas of welding machine design and/or on new welding processes. Job Duties and Responsibilities Utilizes and applies experience in a broad range of fields to understand weld machine development process and interactions between machine design and weld process development/optimization; collaborates with team members and members of the department, providing the benefit of this understanding to enhance the execution of projects Develops new welding machines, software, welding processes and/or test methodologies in accordance with company policies/procedures and in consideration of: Market needs, requiring direct interface with customers, sales and marketing Industry codes, standards, and specifications, and Manufacturing process capabilities, requiring direct interface with manufacturing and methods personnel Establishes standards and methodologies for and conducts evaluations of product performance Develops/refines test methods, as applicable, to support new product development, product evaluations, and competitive benchmarking Facilitates development of manufacturing process capabilities to support introduction of new products Works with minimal direct supervision, conferring with superiors as needed; has appreciable latitude for independent action or decision May provide task oriented direction to Technicians, Technologists and/or Engineers Level I/II/III in the execution of development projects Structures projects for and provides supervision and mentoring to Engineering Interns Maintains records of all work in process and documents interim/final results in the applicable format; these include Project Definitions, Milestone Plans, ES Reports, Technical Reports, Project Tracking Progress Reports and presentations at meetings, seminars, and conferences Basic Requirements Baccalaureate degree in Engineering (or equivalent). Degree in Welding Engineering preferred. Minimum 8 years engineering experience. Processes and applies a broad knowledge of engineering and scientific principles, practices and procedures, within the field of specialization, to the completion of difficult assignments. Computer literate with working knowledge of MS Word, MS Excel, MS Access and MS PowerPoint, as a minimum. Possesses and applies both practical and fundamental understanding of various arc welding processes. Experience with Robotic Programming. Experience with numerical modeling tools including Python is a plus. Excellent written and verbal communication skills. Works effectively in a cross-functional team environment Job Rate: Salary Grade ***The established grade and range for this job is listed above. All applicants should understand that, if selected for a posted job, the actual pay rate will generally fall within the range of the stated grade. Most typically, the pay rate will be set towards the lower end of the range and may vary slightly, depending upon candidate qualifications. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Dayton, VA Job Type: Full Time Shift(s) Available: 2nd Compensation: $20.65/hr Benefits Information Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Marathon Health Clinic (Employer sponsored health center) Paid Vacation and Holidays 401(k) with Cargill matching contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities HACCP Checks Work closely with USDA Assist with department set ups Ensure all safety practices are being followed Responsible for reconditioning station Complete HACCP paperwork Work on production line as needed Required Qualifications Must be eligible to work in the United States without visa sponsorship Must be 18 years or older Ability to read/write/speak English Preferred Qualifications Previous Cargill experience Previous poultry experience Production experience Work history in the last 12 months Considered candidates will receive a phone call from a (952) area code. Please note that this position does not include relocation reimbursement Equal Opportunity Employer, including Disability/Vet

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Bettendorf Employment Status: Hourly Full-Time Function: Manufacturing Pay Range: ($23 - $33) Target Bonus: 5.0% Req ID: 27343 Position Summary A Robotic Programmer works with the engineering and integration teams at Vizient by preparing automation systems to customer order specifications. This includes working with the customer on application or process development, programming structures and system functionality. Applications include, but are not limited to assembly, grinding, machine tending, material handling and welding. Job Responsibilities Take initiative to meet challenging project timelines and hour budgets; Take ownership of assigned tasks and projects to include commitment of travel for project success; Coordinate front-end reach reviews to ensure success of robotic application; Coordinate, implement and verify off-line programming efforts and online implementation of programming; Work with Controls Engineers and Application Engineers to ensure full functionality of the system; Assist in field start-up and customer training when necessary; Uphold company quality objectives and play an active role in reaching continuous improvement objectives; Installation and configuration of appropriate hardware and software options; Assist in the integration, start-up and debugging of plant floor equipment; Ability to improve cycle time and throughput by adjusting robot path or functions; Willingness to travel as required; and Perform miscellaneous job-related duties as assigned. Experience and Skills High attention to detail and quality; Ability to plan and execute daily and weekly scheduled tasks; Ability to keep work area clean and organized; Aptitude for providing directions to peers within the department; Excellent team player with organizational and time management skills; Safely operate fork trucks and overhead cranes; Ability to read and interpret weld symbols; Skill in the use of computers, specifically a PC, Windows-based operating environment; Ability to gather data, compile information and prepare reports; Ability to develop and deliver presentations; and Commitment to company values. Nonessential Skills and Experience Safety (OSHA, SDS), ANSI (RIA) standards; Microsoft Office Suite; Smartsheet Project Management Software; PTC Windchill with Creo, and Solidworks for viewing models; and Environmental, Health and Safety Understand the Company's EH&S Policy and how it relates to this job; Be aware of OSHA & EPA laws and regulations as well as company rules and policies that pertain to this job; Work in a safe and environmentally friendly manner and observe all company EH&S procedures; Immediately notify the supervisor if there is any safety hazard, any equipment not operating correctly or if there are any questions regarding EH&S procedures; and Attend required EH&S training. Physical Demands and Work Environment The physical demands and work environment characteristics described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical demands: While performing duties of job, the employee is typically required to stand; walk; sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; balance; stoop; bend; squat; climb; see, talk and hear. Be able to climb ladders; lift hand tools approx. 1-15 lbs. in weight to complete machine assembly, parts up to 50 lbs. Repetition with activity. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Work environment: The noise level in the work environment is usually low to moderate; temperature in the assembly area may fluctuate with the seasons as the production area is not air conditioned. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Gainesville Employment Status: Hourly Full-Time Function: Maintenance Pay Range: ($53,381.00 - $80,071.00) Target Bonus: % Req ID: 27629 Job Responsibilities Job Requirements Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Shelby Employment Status: Hourly Full-Time Function: Engineering Pay Range: ($24.00/hr - $38.00/hr) Target Bonus: 5.0% Req ID: 27586 Summary Fori Automation, a Lincoln Electric company, is a global leader in designing and integrating automated assembly, welding, material handling, and testing systems. We deliver world-class automation solutions to leading manufacturers worldwide. We're seeking an experienced Mechanical Designer to join our Weld Systems team in Shelby Township, MI. In this role, you'll design and develop mechanical systems for automated welding equipment, ensuring precision, performance, and manufacturability. At Lincoln Electric, we invest in our people. In addition to competitive pay, we offer an annual bonus plan, tuition reimbursement, comprehensive medical/dental/vision benefits, 401(k) with company match, paid time off, and many other outstanding benefits. What You'll Do Develop mechanical concepts and detailed designs using 2D and 3D CAD tools. Focus design on tooling and fixture creation. Create accurate Bills of Materials (B.O.M.) and design documentation. Apply engineering calculations to verify design integrity (e.g., beam stress). Utilize standard designs, specifications, and part/vehicle data to build robust systems. Organize and maintain CAD files in accordance with company and project standards. Select appropriate materials and components for optimal performance and cost. Ensure all designs meet NAAMS standards and relevant industry standards for construction, safety, and ergonomics. Collaborate with cross-functional teams to deliver high-quality automation systems on time. Required Education & Experience Bachelor's degree in Mechanical Engineering preferred (or equivalent experience). 1+ year of design/layout experience (or 2+ years in a similar role without degree). Experience designing MIG and/or resistance weld machines preferred. Proficiency in 3D CAD (Inventor, SolidWorks, or similar) and 2D AutoCAD. Strong grasp of manufacturing principles, materials, and design best practices. Ability to perform basic engineering calculations and apply advanced algebra and design techniques. Team-oriented mindset with the ability to thrive in an ISO9001:2000 environment Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Shelby Employment Status: Salary Full-Time Function: Engineering Pay Range: ($93,254.24 - $125,000.00) Target Bonus: 10.0% Req ID: 27529 Summary Fori Automation, a Lincoln Electric Company, is seeking a highly skilled Project Manager for our Shelby Township, MI location. Fori Automation specializes in designing, building, and integrating custom automated systems for material handling, assembly, testing, and welding, with a strong focus on engineering and manufacturing solutions for the automotive, aerospace, and defense industries. The Project Manager will be responsible for managing all engineering, design, procurement, manufacturing, and integration phases of custom automation projects. This includes contract reviews, design and engineering reviews, procurement, manufacturing, internal and customer buyoffs, as well as shipping, installation, production support, and training. In addition to competitive pay, Lincoln Electric offers an annual bonus plan, tuition reimbursement, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits! What You Will Do Project Execution & Engineering Leadership: Manage engineering and manufacturing teams throughout the project lifecycle, ensuring the integration of complex systems for our clients. Lead design reviews, procurement processes, and oversee the execution of manufacturing workflows. Budget and Financial Management: Monitor project financial performance, including maintaining performance to budget, cash flow management, and implementing change control processes to minimize cost overruns and maximize project profitability. Manufacturing & Quality Control Oversight: Collaborate closely with internal teams and suppliers to ensure the manufacturing and assembly of systems meet high-quality standards, manufacturing specifications, and customer requirements. Resolve engineering, quality, and production issues in a timely manner to maintain on-time delivery. On-Time Delivery & Schedule Management: Oversee detailed project timelines, ensuring all deliverables are met within established schedules. Adjust timelines and work plans based on manufacturing or engineering constraints, ensuring continuous alignment with customer requirements. Team Leadership & Problem Resolution: Lead cross-functional technical teams to resolve engineering and manufacturing issues, ensuring that technical solutions meet performance and quality standards. Foster a collaborative environment while managing competing priorities across multiple projects. Reporting & Communication: Provide weekly status updates and detailed project reporting to senior management through tools like spreadsheets, project timing matrices, and internal issue tracking. Communicate technical details, project risks, and resolutions effectively to both internal teams and customers. Travel & Customer Interaction: Travel may be required (~10%) for customer kickoffs, site reviews, critical issue meetings, and final acceptance. Support customer engagement by providing technical expertise, troubleshooting, and guiding them through the commissioning process. What We're Looking For Minimum of 10+ years of project management experience in an engineering or manufacturing environment, preferably in the automated systems, robotics, or advanced manufacturing industries. AGV experience highly desirable. PMP certification is preferred, but not essential. Strong communication, leadership, and organizational skills, with a proven ability to manage cross-functional engineering teams and manufacturing processes. Proficiency in project management software, including Microsoft Project, Excel, Word, and PowerPoint. Technical Expertise: Knowledge and hands-on experience with assembly systems, tooling equipment, automated systems integration, and manufacturing processes. Demonstrated ability to create, execute, and adjust complex project work plans while managing scope, quality, and risks in a fast-paced engineering environment. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Remote - Ohio Employment Status: Salary Full-Time Function: Engineering Pay Grade and Range: USXX - Grade USXX Salaried 55 Min: 55,952.54 - Mid: 79,932.21 Bonus Plan: AIP Target Bonus: 5.0 Lincoln Electric Automation - Company Overview Lincoln Electric Company has been the industry leader for over 30 years in the robotic automation of welding, cutting, material removal, grinding, and press brake operations. We have provided industry solutions to the fabricators of construction, agricultural, mining, off-road, energy, and transportation equipment. Through the expertise of our personnel, we develop numerous specialty products that increase productivity and maintain quality. The innovative designs and solutions we create are produced to meet or exceed our customer expectations. Position Summary The Service Application Engineer works closely with Customers, Sales, Spare Parts, Field Service and Engineers to quote service and parts for existing and new customers. This will be done through both individual analysis as well as interactions with other engineering disciplines. The Service Applications Engineer is responsible for providing the Engineering Services Manager with the ongoing status of opportunities. The person in this position must facilitate the team concept and have the capability to develop and encourage co-workers' skills and abilities. The Service Applications Engineer will assist the Service Department in the successful execution of active opportunities: set up projects in the accounting system; review and release needed materials; monitor incoming parts and work with Purchasing to expedite as needed; provide timely and responsive support to field personnel; assist with closing projects and requesting invoices from Accounting, etc. Essential Functions and Responsibilities Evaluate technical content of complex potential projects and work with the Sales and Engineering personnel to define system requirements and develop a solution that satisfies such requirements through cost analysis and proposal generation Facilitate execution, timelines and budgets for active opportunities Set up projects in accounting system, review and release needed materials, request invoices from Accounting Monitor incoming parts and work with Purchasing to expedite as needed Identify and assist in improvements to both quoting processes and product standards / marketing Assist with closing projects; respond to and support field personnel Demonstrate excellent communications skills, both written and verbal; demonstrate leadership ability and relate well to others Other duties, responsibilities, and special projects as assigned by the Field Service Manager Qualifications 5 years experience in quoting or experience in automation and/or service industry Intimate technical knowledge with automation systems Understanding of technical requirements for various arc welding processes Skill in organizing resources and establishing priorities Experience with CAD and Microsoft products including: Solidworks, Robot Studio, Excel, Word, PowerPoint, Excellent communication and organizational skills required Principal Accountabilities Help to ensure products standards are used in system solutions to maintain consistency and reduce internal cost Adhere to required timelines and help manage/communicate priorities when all requests cannot be met Keep the Field Service Manager informed Regular and predictable attendance is an essential function of this job Physical Demands and Work Environment The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical demands: Work is sedentary. While performing the duties of this job, the employee is regularly required to walk and sit. There is minimal reaching, bending and lifting in relationship to documents and stored records. Work environment: Remote. Occasional travel. Performance Standards: Annual performance appraisal. Attainment of annual goals established between supervisor and incumbent. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Plymouth - 46247 Employment Status: Hourly Full-Time Function: Manufacturing Pay Range: $27 - $31.50 Target Bonus: 5.0% Req ID: 26585 Job Responsibilities • Repair and replace defective parts in generators, motors, controllers, switchboards, switches, conductors and other electrical fixtures. • Install, maintain and repair electro-mechanical, electrical, and electronic components. • Wiring motor power controls equipment circuits, reading and interpreting blueprints, wiring diagrams and schematics. • Testing wire connections with test equipment using multi-meters and oscilloscope. • Assemble junction boxes, back plates and harnesses per print. • Work closely with engineers and general contractors. • Travel as required. • Participate in ISO training and audits. • Any other assignments as deemed appropriate Job Requirements •High School diploma or equivalent is required. A Technical degree is a plus. 2 - 3 years of hands-on electrical experience working on a plant floor is preferred. • Ability to identify and implement efficient paths of action to finish assigned work • Should be able to test, calibrate, diagnose and repair various devices • Must be able to read and follow blueprints • Must be able to communicate clearly, articulately and professionally • Must have appropriate schedule flexibility, sense of urgency, motivation and versatility to make a substantial contribution to the organization's success • Ability to interact positively and constructively with all RedViking team members while representing company in a professional manner • Willingness to work “above and beyond” in order to meet company goals • Ability to travel to other company sites as well as customer sites as required • Well organized, detail oriented and self-motivated • Must have excellent time management skills • Must have excellent oral and written communication skills Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Mason Employment Status: Hourly Full-Time Function: Maintenance Pay Range: ($49,427.00 - $74,140.00) Target Bonus: % Req ID: 25900 Job Responsibilities Summary of Position: Maintenance Technicians will repair/maintain all production/facility equipment and perform project work. This position requires a high regard for safety at all times in performing any tasks associated with working for Harris Products Group. This person will work safely and supports safety within their team across the organization. Completes weekly maintenance schedule and makes safe, quality & timely repairs to ensure weekly production schedule is completed. Supports lean initiatives to facilitate team goals/metrics. Participates in team meetings and works on cost savings projects. Responsibilities: Completes weekly maintenance schedule Performs preventative maintenance on equipment Schedule repairs of equipment Performs fabrication, pipe fitting, welding, brazing & soldering Operates material handling equipment, scissor lift and manipulating man lift when needed Works on team projects, Six Sigma projects and provides support for other team meetings and projects. Correctly fills our work orders and time sheets Job Requirements Education and Experience: Required - High school diploma or general education degree (GED); and one to two years related experience and/or training; or equivalent combination of education and experience. Good trouble shooting skills in mechanical and pneumatic systems for production machinery and support equipment. Able to read and understand mechanical and pneumatic prints Must be computer literate Operate material handling equipment, scissor lift and manipulating man lift Preferred- Experienced in welding, fabricating and pipe fitting. Experience with Lean tools Able to read and understand electrical, mechanical, hydraulic, and pneumatic prints Understand ladder logic for relays and PLCs Familiar with Allen Bradley PLCs, SLC, Micro Logix and Control Logix Familiar with Logix 500, Logix 5000 and RSLinx Familiar with operation of HMIs (touch screens) Be able to install and set up AC & DC drives Familiar with NEC as applies to Industrial applications Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Engineering Req ID: 26988 Overview We are seeking a talented and driven Embedded Software Engineer with expertise in Linux systems to join our innovative team. This role blends embedded application development, platform engineering, board support package (BSP) maintenance, and hardware bring-up. You'll collaborate with cross-functional teams to create secure, high-performance software for Linux-based embedded systems. Key Responsibilities Embedded Application Development Design, develop, and maintain applications for embedded Linux environments. Write clean, efficient code in C, C++, and Python. Implement and optimize device drivers, APIs, and middleware. Conduct system-level debugging, performance optimization, and troubleshooting. Create and execute test plans to ensure functionality, reliability, and quality. Partner with QA teams for seamless deliverables. Platform Engineering & BSP Maintenance Maintain and update BSPs across diverse hardware platforms. Work with hardware teams to develop, validate, and configure drivers, kernels, and bootloaders. Lead hardware bring-up for new designs, ensuring smooth software-hardware integration. Security and Compliance Embed security best practices throughout the software stack. Perform vulnerability assessments and risk analyses. Collaborate with security experts to resolve incidents and uphold compliance standards. Collaboration & Mentorship Partner with hardware, firmware, and QA teams to define requirements and solve challenges. Mentor junior engineers and contribute to team knowledge-sharing. Qualifications Bachelor's degree in Electrical, Computer, or Software Engineering (or related field); advanced degrees preferred. Level III: 5+ years of relevant experience. Level IV: 8+ years of relevant experience. Hands-on experience in embedded Linux development, including kernels, drivers, and applications. Strong knowledge of Linux kernel architecture, system calls, and bootloaders. Proficiency with version control systems (e.g., Git) and collaborative workflows. Familiarity with networking protocols, communication interfaces, and embedded hardware. Excellent problem-solving, debugging, and communication skills. Preferred Qualifications Experience with real-time operating systems (RTOS) and low-level programming. Expertise in Yocto Project, OpenEmbedded, and cross-compilation tools. Knowledge of Agile/Scrum methodologies. Background in safety-critical or security-focused systems. Contributions to open-source embedded or Linux projects. Understanding of digital electronics and hardware design. At Lincoln Electric, we invest in your growth through ongoing training, competitive benefits, and a collaborative culture that rewards initiative. Ready to power up your career? Apply now and help us weld the future. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Employment Status: Salary Full-Time Function: Research & Development Pay Grade and Range: US10-E-26 (Min $52,300 - Mid $66,700$52,300.00 - $81,100.00) Bonus Plan: Profit SharingProfit Sharing Target Bonus: Hiring Manager: Kyle G Smith Recruiter: Allison Schock Internal Candidate Eligibility Criteria: 1. Is a Lincoln Electric employee with at least 1 year of service 2. Is NOT on an active Performance Improvement Plan (PIP) Primary Function Work as part of Laser Group on the development of laser processing and parameter development in support of LECO products and systems. Work with lasers, optics, motion systems, welding torches, and/or power supplies to conduct process and parameter development. Work with Lincoln Electric Sales Team to develop and deliver laser solutions. Job Duties Perform, instruct and supervise testing of internal R&D efforts. Interact with suppliers, customers, distributors, and sales engineers on a regular basis. Perform other duties assigned by the supervisor. Usually works with minimum supervision, conferring with superior on unusual matters. Demonstrate laser processes for internal and external visitors to Laser Laboratory (EP-5). Travel to assist with installations/runoff at customer facilities. Assignments are broad in nature, requiring originality and ingenuity. Requirements Minimum High School Diploma/GED; Associates or Bachelor's in Engineering, Project Engineering or Engineering Technology preferred 3-5 years laser welding experience. Experience with laser processing and/or robotics is desirable Robotic programming experience is desirable Excellent written and verbal communication skills. Ability to read and interpret weld symbols Skill in the use of computers, specifically a PC, Windows-based operating environment Ability to work independently and as part of a team. Willingness to work in a lab environment and perform welds without assistance Ability to handle a constantly changing set of priorities. Willingness to travel 20% of the time. Possesses and applies a broad knowledge of principles, practices and procedures of particular field of specialization to the completion of difficult assignments. Physical Demands and Work Environment: The physical demands and work environment characteristics described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical demands: While performing duties of job, the employee is typically required to stand; walk; sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; balance; stoop; bend; squat; climb; talk and hear. Be able to climb ladders; lift hand tools approx. 1-15 lbs. in weight to complete machine assembly, parts up to 50 lbs. Repetition with activity. Work environment: The noise level in the work environment is usually low to moderate. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Shelby Employment Status: Hourly Full-Time Function: Engineering Req ID: 26527 Summary Fori Automation, LLC, a Lincoln Electric Company, is a global supplier of welding, assembly, material handling, and testing equipment for automotive and non-automotive customers worldwide. Fori Automation focuses on delivering cost-effective, highly engineered products and systems designed and manufactured globally with localized sales, project management, and service. We are seeking an experienced Controls Software Engineer for our Shelby Township, MI site with a background in industrial software development. The Controls Software Engineer will initially support active projects and then transition to completing projects directly. They will take the lead on developing software on new projects and debug software on new machines. This role requires travel to customer sites for equipment installation and customer interaction. What You Will Do Design PLC software and HMIs for industrial automation equipment Debug and troubleshoot PLC software and HMIs Collaborate with cross-functional teams to maintain project timelines and critical path milestones. Maintain task lists and reports of open items. Maintain project design documentation and prepare customer deliverables. Ensure the controls engineering process is tracked and followed. Assist customers and local tradespeople in troubleshooting equipment issues. Conduct end-user training on equipment operation. Education & Experience Requirements Electrical Engineering or Computer Engineering degree preferred; Mechatronics degrees will also be considered. Minimum of two years of experience as a Controls Engineer or Controls Software Engineer with experience in designing Rockwell Logix 5000 or Siemens S7-1500 family processors. Knowledge or education in electrical circuits, schematic reading, design, and troubleshooting. Experience with electrical CAD systems, such as AutoCAD Electrical and/or ePLAN Experience with PLC programming in ladder and structured text. Experience programming HMIs Travel required: approximately 30% domestic and international. Weekend work may be required based on project schedules. Preferred Experience in computer programming languages, such as VB, C/C++, or C#. Experience with Rockwell and Siemens HMI preferred. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 26250 Employment Status: Salary Full-Time Req ID: 27769 Primary Function Supports sales and estimating activities in the Defense industry segment with a particular emphasis on the U.S. Navy, in particular replacing cast and forged components with additively manufactured components, by fostering key customer relationships, identifying new business opportunities and customers, creating proposals and quotes, negotiating and closing sales, and maintaining knowledge of current market conditions and technologies. Job Duties Interact with customers, sales, estimating and engineering team members to generate quotes, and maintain customer relationships. Assist in reviewing DOD contracts and technical publications/specifications. Use state-of-the-art CAD and additive manufacturing software in support of accurate quote estimates. Actively manage incoming leads and follow-up, maintain digital distribution list. Manage Additive Salesforce relationships, leads, and opportunities. Maintain database of new contacts, accounts and opportunities. Create dashboards and issue periodic reports. Assist in market research and outreach: identifying promising markets and engaging the customer base in those markets, develop sales tools content. Assist Marketing with trade show planning, setup and participation as required, as well as content for brochures, articles, social media, etc. Possess a strong understanding of our value proposition, product offering, our competition in the industry, and positioning. Follow the latest industry developments and stay up to date on competitors. Assumes additional duties as needed or directed in support of the Company's 2025/2030 Strategies. Requirements U.S. citizen. Bachelor's degree required, Engineering preferred. 3+ years proven track record in engineering sales or related market. Previous experience in welding, additive manufacturing or related fields preferred. Demonstrated communication skills - verbal and written. Computer literate with working knowledge of MS Office (i.e. Word, Excel, PowerPoint) and CAD (e.g. Solidworks, Autodesk, etc). Familiarity with CRM tools is a plus Technical skills required to understand and propose products or solutions by focusing on client requirements, including well-versed in welding metallurgy, mechanics of materials, and material/process technical specifications. Ability to communicate information, whether technical or non-technical to staff members and customers, in a clear and concise manner. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Plymouth - 46247 Employment Status: Salary Full-Time Function: Engineering Req ID: 27246 Summary Lincoln Electric is seeking a highly skilled Project Manager to support our Red Viking subsidiary based in Plymouth, MI. This role is responsible for leading complex, high-visibility projects that require significant resources, cross-functional collaboration, and seamless integration across teams. The Project Manager will drive initiatives from concept through final implementation, ensuring quality, budget, and schedule adherence while maintaining strong stakeholder alignment. At Lincoln Electric, we offer career growth potential along with a competitive compensation package, including bonus incentives, student loan repayment, tuition reimbursement, paid time off, paid holidays, a comprehensive benefits package (medical, dental, and vision), retirement plans, and much more. Key Responsibilities Lead projects through the full lifecycle: initiation, planning, execution, monitoring, control, and closure. Define project scope, objectives, deliverables, and success criteria while aligning team members to roles and responsibilities. Develop detailed project schedules, allocate resources, and manage risks to ensure timely and cost-effective completion. Coordinate cross-functional efforts with engineering, manufacturing, procurement, testing, quality, distributors, vendors, and end users. Ensure strict compliance with quality standards; review and approve final project deliverables. Provide regular updates to executive leadership and business unit leaders on project progress, risks, and outcomes. Manage and maintain financial tracking tools including Gross Margin, Operating Profit, Backlog, SG&A, and other key financials. Utilize advanced Excel skills to create and troubleshoot formulas, build reports, and support executive-level reporting. Leverage ERP systems for project tracking, reporting, and ensuring data integrity across business functions. Lead and mentor a team of project engineers, staff engineers, and manufacturing professionals to achieve technical and operational goals. Prepare clear documentation, presentations, and reports for both internal and external stakeholders Required Experience & Education Education: Bachelor's degree in Engineering, Technical Discipline, or Business Administration (with strong technical design and execution background). Experience: 7-10+ years of project management experience in a manufacturing environment. Proven background in advanced capital equipment design, build, and installation (scheduling, procurement, manufacturing, testing, and quality). PMP certification strongly preferred. Project Leadership: Demonstrated success managing scope, budgets, schedules, personnel, and materials within complex organizations. Technical Knowledge: ERP systems experience for project management and reporting. Proficiency with Excel (advanced formulas, financial tracking, reporting). Familiarity with ISO 9001, ISO 14001, ISO 17025, or equivalent standards. Soft Skills: Strong leadership, influence, and negotiation abilities. Excellent written, verbal, and presentation communication skills. High attention to detail and documentation accuracy. Other Requirements: Supervisory experience managing technical professionals. This person will work very closely with a team of project engineers, staff engineers, and manufacturing professionals on a daily basis. Willingness to travel up to 20%. U.S. Citizen or Permanent Resident (ITAR compliance required). Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Fort Loramie Req ID: 27957 Position Summary Identify the manufacturing process, recommend the machinery concept, accurately develop the cost model, create quotations and provide other supporting information as needed to sell Lincoln Electric Automation-designed equipment. Role Qualifications Must be familiar with Company quality objectives and play an active role in reaching continuous improvement objectives. Play an active role reviewing and developing customer process requirements as it pertains to the application of our products. Play an active role in communicating issues that could impact customer satisfaction. Position Responsibilities Evaluate the feasibility of automation systems based on data supplied by Sales, Engineering, Management and Customers. Develop manufacturing processes and concepts capable of producing systems or products Research and develop accurate cost estimates for Lincoln Electric Automation equipment. Write technical quotations and produce supporting documentation as needed. Assist as necessary with customer communication, presentations, and trade related events. Follow-up as necessary with sales, customers, and representatives. Responsible for following Department ISO procedures. Essential Skills and Experience Minimum High School Diploma, Associate degree in technical discipline desired. CAD (3D modeling a plus). Preferred 5 years of experience in manufacturing and design (mechanical/electrical) of industrial automated equipment. Metal forming (bending, forming, piercing, etc.) and metal joining (Laser, arc, resistance welding, etc.) experience preferred. Preferred 1-2 years of experience, working with customers and suppliers. Years of experience will influence final selection. Proficient in Word, Excel and PowerPoint. Effective writing and communication skills. Commitment to company values. Educational, training, and experience requirements may be modified at the Managements Team's discretion. Nonessential Skills and Experience Computer proficiency, including spreadsheet, word processing, and project management software. FMEA, Equipment Capability, Safety (OSHA Stds.) Environmental, Health & Safety (EH&S) Understand the Company's EHS Policy and how it relates to this job. Be aware of OSHA & EPA laws and regulations as well as the Company's Plant Rules and Regulations that pertain to this job. Work in a safe and environmentally friendly manner and observe all company EHS procedures. Know that the company EHS procedures are located on the ISO drive. Immediately notify the Supervisor if there is any safety hazard, any equipment not operating correctly, or if there are any questions regarding EHS procedures. Attend required EHS training Physical Demands and Work Environment The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical demands: While performing duties of job, employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk and hear. Repetition with activity; computer work. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Work environment: The noise level in the work environment is usually moderate. ISO-14001 Complies with ISO 14001, and other relevant standards. Support, implement and understand the intent of the EMS policy. Participates with ISO-14001 as required. AS 9100 w/ ISO 9001 Complies with AS9100D and ISO 9001:2015 quality management system, procedures, and work instructions General sign-off: The employee is expected to adhere to all company policies Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.