Production Control jobs near me - 88 jobs

The Sales Representative is to be the initial point of contact for our customers and to assist in resolving their questions or concerns. Manage CRM system including data formatting, report generation and process control. Interact with marketing/sales, manufacturing, and engineering to obtain the necessary information to address customer needs. Provide product return information to the customer and issue evaluation and repair quotations as required based on input from the appropriate product/sales manager. • Provide customer service and sales support as the initial point of contact for customers to assist in resolving their questions or concerns. • Interact with marketing/sales, manufacturing, and engineering to obtain the necessary information to address customer needs. • Provide product return information to the customer and issue evaluation and repair quotations as required based on input from the appropriate product/sales manager. • Enter purchase order information into the ERP/CRM system. Ensure that all pertinent information has been reviewed/approved by the appropriate sales/product manager, contracts administration, engineering, production control, quality and security (if required). • Assist marketing/sales in obtaining information related to order timing for forecast accuracy. Review delivery requirements with manufacturing to determine whether factory capacity correlates with customer needs. Update customers regarding shipment status, specifically any issues which will result in delayed shipments. • Support customer requests to expedite orders, if possible. Collaborate with the scheduler and manufacturing to review lead time reduction opportunities. • Manage ERP/CRM system including assisting with system implementations, data formatting, system updates, data management, report generation, process control and other duties as assigned. • Performs other related duties as assigned. Requirements • Bachelor's degree in business administration or equivalent. • Two (2) years' experience in production control and/or sales functions related to planning, scheduling, forecasting and order processing. • ERP/CRM experience required - Microsoft Dynamics CRM experience a plus. • Strong data entry skills and proven customer service, organizational and problem-solving skills. • Excellent verbal/written communication and interpersonal skills. • Self-starter with good judgment and ability to multi-task, prioritize and work independently. CPI values the contributions of a diverse workforce and is proud to be an Equal Opportunity Employer. We are an AA/EEO/Veterans/Disabled employer. This position requires potential access to technology controlled under the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR). The successful candidate must be a “U.S. Person” as defined under ITAR and EAR. In order to be a U.S. Person for ITAR and EAR purposes, you must (i) be a citizen or national of the United States; or (ii) be a lawful permanent resident of the United States; or (iii) have been admitted to the United States as a refugee, or have been granted asylum. About Communications & Power Industries Communications & Power Industries is a global manufacturer of electronic components and subsystems focused primarily on communications, defense and medical markets. With a heritage of technological excellence that spans decades, CPI develops, manufactures and globally distributes innovative and reliable technology solutions used in the generation, amplification, transmission and reception of microwave signals for commercial and military applications. CPI serves customers in the communications, defense, medical, industrial and scientific markets.

JOB SUMMARYThe Material Handler is responsible for providing production control assistance to the production department, by tracking parts through the repair processes, staging parts in departments, organizing part storage areas, monitoring completion time to increase throughput, and picking up & delivering parts to other buildings. The position performs its primary functions in a climate-controlled and modern state-of-the-art facility. This position will work alongside experienced team members and gain the knowledge and skills necessary to succeed in your career. Through our extensive in-house training program, the successful applicant will be instructed via a series of computer based and hands-on training, the requirements of the position. COMPANY OVERVIEWComponent Repair Technologies, Inc. (CRT) began as a locally family-owned business, with operations in Mentor, OH since 1985, and grew into a global leader (500+ employees) in the aerospace MRO sector. Specializing in the repair and overhaul of turbine engine components, CRT proudly serves the world's largest airlines and jet engine manufactures. Component Repair Technologies is focused on our valued employees, customers, and community. In 2025, CRT became a Safran Aircraft Engines company as a Center of Excellence for the repair of large jet engine parts in the Americas. For over 120 years, Safran, through its Aircraft Engines subsidiary, designs, produces, markets and supports, alone or in partnership, aircraft engines offering world-class performance and reliability. Its core purpose is to contribute to a safer, more sustainable world, where air transport is more environmentally friendly, comfortable and accessible. Operating through CFM International, its 50/50 joint venture with GE Aerospace, Safran Aircraft Engines is the world's leading supplier of single-aisle commercial jet engines, the CFM56 and LEAP. Safran Aircraft Engines is fully committed to sustainable aviation through the RISE (Revolutionary Innovation for Sustainable Engines) technology development program. Safran Aircraft Engines also deploys a global network providing a full range of support, maintenance & repair services. Visit ************************** *********************** more information. Take-off in your career, learn new skills and become part of a world-class workforce. DUTIES AND RESPONSIBILITIES Through our extensive in-house training program, the successful applicant will be instructed via a series of computer based and hands-on training, the necessary skills of the position. 1. Follow established safety protocols and guidelines to ensure full compliance with company safety policies and procedures.2. Track parts (turbine engine components) through the repair processes, staging parts in departments, organizing part storage areas, monitoring completion time to increase throughput, and picking up & delivering parts to other buildings. 3. Assist the shipping/receiving department with delivery parts to the shipping couriers.4. Work as a team member with production, engineering, and production control personnel to maintain continuity in scheduling by reviewing inventory, anticipated work scope and needed location of components in a timely, safe, and efficient manner.5. Physically move parts to maintain parts progression between departments. 6. Use the electronic tracking system for part identification and location. (RFID tracking technology)7. Provide skids, carts, or racks to each department based on need and workload.8. Organize staging areas daily. Verify part number, serial number, and internal tracking numbers all match. 9. Ensure operations are stamped off and verify out of sequence operations are correctly identified.10. Provide priority lists for each department as needed based on quantity of parts in the department staging area. Print and distribute 7-day and 14-day receiving lists for product leaders.11. Track parts that may be categorized as an outside vendor. 12. Assign ship dates, coordinate with product leaders so that the proper paperwork is placed into each folder. 13. Help to ensure that customer requests and part movements are accomplished in a timely manner.14. Coordinate the scrapping of parts with product leaders, product support engineers, and quality engineers. Insert scrap paperwork after verification of P/N, S/N, and then coordinate the physical scrapping of the components.15. Display a positive attitude and degree of professionalism as work is accomplished across the entirety of the facility. REQUIRED QUALIFICATIONS1. One year's experience in a manufacturing environment or similar.2. Experience in the use of skids, pallet jacks and forklifts/lift trucks.3. Ability or experience following directions and reading work instructions.4. Demonstrated ability or experience in being able to effectively communicate with team members, including participating in structured training. OTHER QUALIFICATIONS1. High school or technical school graduate or equivalent.2. Careful attention to detail.3. Capable of handling multiple tasks4. Basic knowledge of computers and standard software programs.5. Read, write, speak, and understand the English language. WORK ENVIRONMENT1. This position has pre-employment testing requirements that may require fitness for duty testing and a vision exam.2. Follow general shop safety procedures including the occasional use of safety glasses, safety toe shoes, and hearing protection. 3. Work in difficult positions from time to time. Stand and/or sit for portions of the shift. Move parts (>50 pounds) using hoists, slings, carts, or other handling methods. Move less heavy parts ( CRT is committed to providing a safe and healthy workplace and promoting the health and well-being of its employees. It is the Company's policy to only hire individuals who do not use drugs. All candidates will be screened for drug use prior to hire. Employment opportunities at CRT are open to all qualified applicants solely on the basis of their job-related experience, knowledge, skills and abilities. CRT complies with all applicable federal, state, and local laws with regard to equal employment opportunity. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Dayton Ohio Exp 10-15yrs Deg Bachelors Relo Bonus Job Description Operations Director (Individual must possess a Top Secret Clearance or recently had a clearance in the last 2 years) Must Must Must have! This Operations Director position is fully responsible for the operations management of one of Aerospace Structures' Operations Center of Excellence (COE) and is directly accountable for the financial and operational performance of the COE. The COE leader has a fully integrated direct and matrix team, including all Production operations, Supply Chain Management, Production Control, Quality Assurance, Manufacturing Engineering, Facilities, Human Resources, and Finance. Major Responsibilities Drive the COE's strategic direction to meet goals and grow the business. Ensure customers' needs are met and maintain/improve relationships to broaden the business base and gain market share. Focus on speed, cost, and quality to maximize gross margins. Ensure customer on time delivery and drive zero defect quality. Drive the financial performance of the COE. Direct the planning, budgeting, forecasting, and financial controls to guarantee financial operating integrity. Work with Quality Assurance to maintain AS9100 status. Participate and assist with AS9100 audits as necessary. Work closely with Security, Environmental, and EICO functions to ensure local, state, and federal compliance. Advocate and ensure a safe work environment. Ensure succession plans are in place and be proactive in coaching and mentoring key talent to assume increased responsibilities. Maintain a personal awareness of and involvement in contract milestones that directly relate to billings resulting in Cash Flow. Establish and maintain close customer and supplier relationships, maintaining a competitive market understanding and promoting ATK Structures in the industry. Direct involvement with customer as required on new program opportunities, proposals, costing reviews, and contract negotiations. Communicate key issues (financial program related, market developments, organizational changes, quality issues, and other key management issues) upward to division leadership as required. Champion compliance with state, federal, and local laws and regulations, particularly EEOC, FARs, ITARs, and export licensing. Work with the Facilities organization to develop and execute Capital Equipment plans Skills and Knowledge Aerospace Manufacturing/Operations experience Strong financial and budgeting skills, including EAC process familiarity. Technical and business acumen in the Aerospace industry to include knowledge of future trends, policies, practices, and technology. Dedicated to meeting the expectations and requirements of internal and external customers to establish and maintain effective relationships with customers and gain their trust and respect. Understands the culture of large organizations and knows how to get things done through formal and informal channels. Communicates an inspired vision that motivates entire units and the organization. Provides challenging and stretching tasks and assignments to key talent in the organization. Steadfastly pushes self and others to achieve company goals. Champion the Company's Business and Ethics Code of Conduct. Strong composites and aircraft assembly operations experience. Requirements Candidate of Choice must have current TS-DOD security clearance Bachelor of Science required, MBA preferred. Minimum of 20 years of increasingly responsible operations management experience focused on manufacturing and or 18 with MS Degree A minimum of 5 years strong senior management experience. Position can be filled at one level lower Bachelor of Science required, MBA preferred. Minimum of 13 years of increasingly responsible operations management experience focused on manufacturing and or 13 with MS Degree A minimum of 5 years strong senior management experience. ATK has the people, strategy, agility, and products to thrive in a highly dynamic national security and space environment. If you are a dynamic, successful, driven professional, ATK is the company that will further your experience and career growth. We offer a highly competitive salary, comprehensive benefits including, medical, dental, 401k, tuition reimbursement, and much more. As an Equal Opportunity Employer, we are committed to a diverse workforce. Additional Information All your information will be kept confidential according to EEO guidelines. Direct Staffing Inc

This position is responsible for, but not limited to, ensuring prompt and accurate shipment of our products and verifying incoming shipments to ensure total customer satisfaction. RESPONSIBILITIES Receive and verify daily shipments from small package services and various truck deliveries: match purchase order with slip, enter information with scanner, and deliver to appropriate area. Unload and verify freight deliveries: unload with forklift and check for damage. Must be able to accurately match item numbers/ serial numbers on pick slip to the items being packed. Close out UPS and Federal Express shipping systems and run daily reports. Arrange for packages to be picked up by carriers. Wrap packages for shipment and attach invoice. Assist in warehouse maintenance Package and addresses material for shipping. Complete internal and external shipping documents. Arrange for transportation of completed orders. Adheres to quality and safety systems or maintenance of quality and safety standards. REQUIREMENTS Good organizational and communication skills. Basic computer skills. Data entry experience. Attention to detail. Must have good or corrected eyesight to ensure quality of work. Ability to lift 50 pounds on a regular basis. Ability to learn quickly, works reliably and accurately, and performs well as a member of the Production Control team. Ability to operate a forklift, or willingness to learn how to operate one. 1 year experience in all phases of shipping and receiving. High School Education or better

**Country:** United States of America ** Onsite **U.S. Citizen, U.S. Person, or Immigration Status Requirements:** This job requires a U.S. Person. A U.S. Person is a lawful permanent resident as defined in 8 U.S.C. 1101(a)(20) or who is a protected individual as defined by 8 U.S.C. 1324b(a)(3). U.S. citizens, U.S. nationals, U.S. permanent residents, or individuals granted refugee or asylee status in the U.S. are considered U.S. persons. For a complete definition of "U.S. Person" go here. ********************************************************************************************** **Security Clearance:** None/Not Required Joining Collins Aerospace isn't just about finding a job; it's about embarking on a journey to redefine the future of aerospace technology. Collins Aerospace, an RTX company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio, and expertise to solve customers' toughest challenges and to meet the demands of a rapidly evolving global market. **3rd Shift: Sunday - Thursday 11pm - 7am** **What You Will Do** + Work with production control to create a week-by-week schedule and assign operators accordingly. + Work with QE's & ME's to improve processes within the cell in order to improve efficiency/eliminate rework/scrap. + Work with 1st and 3rd shift supervisors on priorities and needs. + Establish recovery plans where necessary in enough time to recover daily / weekly misses before they impact the month/quarter. + Roll-up, consolidate, speak to overall cell results (control tower ownership) + Ensure robust root cause and corrective actions (DAISE) for any major monthly misses (red metrics) at the Cell Control Tower levels. + Ensure celebrations of 'wins' when Cells perform at an exceptional level. + Execute Macro Plan activities throughout the year including support of 4x annual Lean Leadership Weeks **People:** + Responsible for communicating, training, guidance, and counsel of hourly associates to ensure the cell actively supports Continuous Improvement strategies, methodologies, and philosophies (5S, Flow, Ahead/Behind - visual management, SWIP management, Line Back Logistics, Product / Process Family definition, etc.) + Direct the activities of operators, including training, performance appraisals, discipline, safety, communications, and opportunity resolution. + Create a culture of ownership, accountability, and continuous improvement. **Lean Transformation:** + Partner with CORE / CI to support the site transformation journey; support the transformation roadmap. + Create/align cells through product/process family alignment IAW defined plans. + Implement JIT/JIS Materials Management philosophy. + Ensure the cell implements and operates 'daily' to the 6 principles of Ops Management + Adhere to Standard Work (Time based standard work for all functions) + Use Closed Loop Systems (corrective actions) for all losses **Positively affect performance metrics including, but not limited to:** + Output + Hours + On Time Delivery + Inventory (WIP)(SWIP to WIP ratio approaching 1) + Lead Time (Days to Manufacture) decreases. + Productivity / Efficiency / Utilization / OEE increases. + Yield / Process Capability increases. + Schedule Stabilization improvement + Safety (First Aid, recordables, lost time) + SRR (scrap, rework and repair) + Lead special projects as needed. **Qualifications You Must Have** + Typically requires a University Degree and minimum 2 years of prior relevant experience + 1 or more years of experience in a manufacturing environment. + Experience in Operations related Management roles (hands on supervision). + Experience demonstrating technical knowledge of manufacturing processes (machining/special processing/assembly). + Experience utilizing Microsoft Office- Excel, Word, and PowerPoint skills. **Qualifications We Prefer** + SAP knowledge + Lean Manufacturing experience. + Experience in leading cross-functional teams + Direct working experience of the Troy W&B Site / Products. + Aerospace work environment experience. + Automotive production system experience (Lean, ACE, TPS, DBS, etc.) **What We Offer** Some of our competitive benefits package includes: + Medical, dental, and vision insurance + Three weeks of vacation for newly hired employees + Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option + Tuition reimbursement program + Student Loan Repayment Program + Life insurance and disability coverage + Optional coverages you can buy pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection + Birth, adoption, parental leave benefits + Ovia Health, fertility, and family planning + Adoption Assistance + Autism Benefit + Employee Assistance Plan, including up to 10 free counseling sessions + Healthy You Incentives, wellness rewards program + Doctor on Demand, virtual doctor visits + Bright Horizons, child and elder care services + Teladoc Medical Experts, second opinion program + And more! **Learn More & Apply Now!** Our Advanced Structures team leverages advanced materials and additive manufacturing to develop complex interior and exterior solutions. These solutions ensure structural integrity of the aircraft, help aircraft take off and land, stay trim in the air, move forward, carry cargo and conduct rescues. We delight our customers with superior products and best-in-class service. Our global team is committed to continuous improvement - we work hard to make our solutions lighter-weight, stronger and more technically advanced, so that plane travel can be safer, more affordable and more sustainable in the years to come. We are looking for the best and brightest to fly and land with us! **WE ARE REDEFINING AEROSPACE.** *Please ensure the role type (defined below) is appropriate for your needs before applying to this role. **Onsite:** Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. _Regardless of your role type, collaboration and innovation are critical to our business and all employees will have access to digital tools so they can work with colleagues around the world - and access to Collins sites when their work requires in-person meetings._ At Collins, the paths we pave together lead to limitless possibility. And the bonds we form - with our customers and with each other -- propel us all higher, again and again. **_As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote._** The salary range for this role is 66,000 USD - 130,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. _RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act._ **Privacy Policy and Terms:** Click on this link (******************************************************** to read the Policy and Terms Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.

DOT and FLSA CLASSIFICATION: Non Covered/Exempt The Planning Analyst is responsible for overseeing multiple aircraft workscopes, and budgets from start to finish. Including but not limited to ensuring new task cards are bid, task cards are loaded in the correct billing task codes, generating and executing pre-dock presentations and meetings, coordinating with the Planning Generalist to ensure received workscopes are loaded into the MROH ERP System and other duties as assigned by the Planning and Production Control Manager. FUNCTIONAL DUTIES AND RESPONSIBILITIES: 1. Manage multiple aircraft workscopes from start to finish using established standard operating procedures and ensuring all procedures are implemented. Work within the MROH ERP system. 2. Work closely with the Planning and Production Control Manager, Supervisor and Generalist to ensure all aspects of the aircraft visits are identified and accounted for. 3. Work closely with the Production team and Commercial regarding work scope and flow, work scope changes, customer request items and provide input in providing reliable ETR estimates. 4. Set up and conduct Pre-Dock and Post Dock meetings to discuss workload, down-times, project ETR, lessons learned, materials, and customer concern or feedback. 5. Responsible to develop planning tools to assist in monitoring the status of maintenance visit and coordinating with production team to ensure that the production team has everything necessary to complete the project according to plan. 6. Coordinate with Production team to develop a workable plan for the scheduling of maintenance tasks relative to the span time of the aircraft (Flow Chart). Assist the Production Team in developing recovery plans as necessary. 7. Validate technical review of customer provided work scope to identify project needs. (Including: capabilities, data, tooling, training and materials.) 8. All other duties as assigned by the Planning and Production Control Manager

Who We Are Applied Materials is a global leader in materials engineering solutions used to produce virtually every new chip and advanced display in the world. We design, build and service cutting-edge equipment that helps our customers manufacture display and semiconductor chips - the brains of devices we use every day. As the foundation of the global electronics industry, Applied enables the exciting technologies that literally connect our world - like AI and IoT. If you want to push the boundaries of materials science and engineering to create next generation technology, join us to deliver material innovation that changes the world. What We Offer Salary: $78,000.00 - $107,500.00 Location: Santa Clara,CA You'll benefit from a supportive work culture that encourages you to learn, develop, and grow your career as you take on challenges and drive innovative solutions for our customers. We empower our team to push the boundaries of what is possible-while learning every day in a supportive leading global company. Visit our Careers website to learn more. At Applied Materials, we care about the health and wellbeing of our employees. We're committed to providing programs and support that encourage personal and professional growth and care for you at work, at home, or wherever you may go. Learn more about our benefits. Program Overview Through the 30-month Supply Chain MBA Development Rotational Program, you will rotate through positions in Purchasing, Sourcing, and Commodity Management over the course of 18 months, then apply your learnings to a "final placement" role for an additional 12 months. In the program, participants develop and refine the technical and business skills required to be successful in the Supply Chain organization. You will experience a blended learning environment which includes mentorship, job shadowing, and expanded networking opportunities with leaders and within our Employee Resource Groups such as the Young Professionals Network (YPN). Participants will have the opportunity to gain high level visibility and create significant impact within a global manufacturing organization. Position Details During a series of rotations, participants will take on full-time responsibility of their functional role, which includes: * Forecasts and communicates engineering, materials, and manufacturing requirements to suppliers. Provides input to outsourcing decisions by performing make versus buy analysis. Coordinates demand signals through MRP to minimize inventory exposure. * Coordinates product development process deliverables through matrix management of buyers, planners, and production control. Collaborates with engineering team to interpret engineering requirements. * Assists in supplier price and delivery negotiations. Utilizes the preferred supplier selection and assessment process when selecting suppliers. Completes supplier risk assessment on critical and unique parts. Monitors supplier performance (delivery, quality, and cost). * Manages materials change control process. Meets cost objectives and resolves quality issues. Generates and publishes Key Process Indicators. Tracks total landed costs targets. * Works with engineering to identify preliminary critical parts, long-lead parts and inspection requirements. Assists in developing supplier and commodity road maps to engineering. * Actively mediates and partners with quality and engineering teams to resolve supplier quality issues for assigned product groups. Escalate issues to relevant escalation paths as needed (Engineering, Manufacturing, Supply Chain, Technical Program Management, Finance). * Use standard tools, dashboards and BKMs to assess supplier capability, overall capacity, ability to support rapid prototyping (NPI), ability to support volume manufacturing, and vertical integration (e.g. parts, cleaning, assembly capabilities) to aid in making sustainable sourcing decisions. Requirements * Graduating with an MBA in Supply Chain Management coupled with technical undergraduate degree * Must be in good academic standing with a preferred GPA of 3.0 or above on a 4.0 scale * Communicates difficult concepts and negotiates with others to adopt a different point of view * Ability to exercise judgment based on the analysis of multiple sources of information * Enterprise Resource Planning (ERP) technology exposure required. Hands on experience preferred * Data analytics (E.g. advanced excel, working with multiple data sets for decision making) * Ability to interpret engineering drawing specifications/requirements to source parts aligning with sourcing strategy and Supplier capabilities. * Previous experience in Engineering, Supply Chain, Operations, Manufacturing, Project Management a plus * Certifications: Six sigma green belt, APICS CPIM, APICS CSCP, PMP a plus * Flexible and adaptable mindset who thrives in a results-driven culture * Commitment to completing the 30-month program before pursuing other roles within Applied Applications will be reviewed on a rolling basis. Please apply by October 31, 2025. Note: This position may close early based on application volume or candidate selection. Additional Information Time Type: Full time Employee Type: New College Grad Travel: Yes, 10% of the Time Relocation Eligible: Yes The salary offered to a selected candidate will be based on multiple factors including location, hire grade, job-related knowledge, skills, experience, and with consideration of internal equity of our current team members. In addition to a comprehensive benefits package, candidates may be eligible for other forms of compensation such as participation in a bonus and a stock award program, as applicable. For all sales roles, the posted salary range is the Target Total Cash (TTC) range for the role, which is the sum of base salary and target bonus amount at 100% goal achievement. Applied Materials is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, national origin, citizenship, ancestry, religion, creed, sex, sexual orientation, gender identity, age, disability, veteran or military status, or any other basis prohibited by law. In addition, Applied endeavors to make our careers site accessible to all users. If you would like to contact us regarding accessibility of our website or need assistance completing the application process, please contact us via e-mail at Accommodations_****************, or by calling our HR Direct Help Line at ************, option 1, and following the prompts to speak to an HR Advisor. This contact is for accommodation requests only and cannot be used to inquire about the status of applications.

Responsibilities / Tasks GEA Group, founded in Germany in 1881, is a global leader in engineering solutions, serving industries such as food and beverage, pharma, dairy, and more. With over 18,000 employees worldwide and a strong U.S. presence since 1929, GEA combines the heritage of a well-established company with the innovation of a forward-thinking industry leader. At GEA, we're not just building equipment, we're building lasting careers with an average employee tenure range from 8 + years, reflecting the strong culture, growth opportunities, and support we provide. Start strong - Medical, dental, and vision coverage begins on your first day Recharge and refresh - Enjoy 12 paid holidays, including a flexible floating holiday, and 136 hours of PTO to relax or explore Invest in your future - A 7% 401(k) employer match helps grow your retirement savings faster Keep learning - Take advantage of tuition reimbursement to further your education or skillset Live well - Our wellness incentive program rewards healthy habits Get support when you need it - Access to a confidential Employee Assistance Program for personal or professional guidance Save smart - Flexible Health Savings and Spending Accounts to manage out-of-pocket expenses The typical base pay range for this position at the start of employment is expected to be between $22 to $34 per hour. GEA Group has different base pay ranges for different work locations within the United States. The pay range is not guaranteed compensation or salary. The estimated range is the budgeted amount for the position. Final offers are based on various factors, including skill set, experience, location, qualifications, and other job-related reasons. You may be eligible for additional rewards, such as a discretionary bonus (based on eligibility) and/or equity awards. At GEA, we don't just offer jobs, we offer opportunities to thrive, grow, and make an impact. Job Summary: The Production Designer reviews and creates flat layouts, enters Bill of Materials, routings and hours for shop personal for the fabrication of GEA equipment. Essential Duties/Responsibilities: Participates in design reviews prior to production control transmittal of Rev 0 prints. Verifies dimensions prior to layouts. Must possess strong print reading and math skills to create 2-D layouts for sheet metal work involving plasma cutter and sheer. Enters full Bill of Materials in ERP Creates work center operational routings and enters into ERP. Stores all design packages in production control archive for reference and red line documentation. Supports the shop floor in obtaining dimensions and mitigating fabrication challenges regarding interference, layouts and material substitutions. Processes stock jobs and fast track jobs Responsible for full fabrication package reproduction and release Creates new part numbers for materials and outsourced fabrication services. Communicates directly with Engineering regarding print discrepancies and missing information. Creates Weld Mapping prints upon request Maintains share point data entry of fully processed prints Fosters collaborative working relationships with all colleagues and project team members. Other duties as assigned. Your Profile / Qualifications Required Skills/Abilities: Excellent written and verbal communication skills along with well-developed inter-personal skills. Strong mechanical aptitude and math skills Familiarity and adherence to industry Safety standards. Must be able to use personal computer. Ability to navigate Internet and use MS Office software Must be detail oriented with strong organization skills, ability to manage multiple changing priorities, possess good judgment and knowledge of time management principle. Onsite 5 days per week in Hudson, WI Education and Experience: Must have High School Diploma Manufacturing Engineering Technology education preferred. Experience in a large-scale manufacturing environment preferred. Experience with modeling software, AutoCAD, Inventor or equivalent preferred. #engineeringforthebetter GEA Group is committed to fostering an inclusive work environment where all clients and employees feel welcomed, accepted and valued. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Did we spark your interest? Then please click apply above to access our guided application process.

Join Firework - Where Innovation Meets Impact Firework is revolutionizing connected commerce with the world's most advanced and largest AI-powered video commerce platform, trusted by global brands and leading retailers. We bring the energy of in-store experiences online, transforming how businesses engage, convert, and build lasting customer relationships. At Firework, you'll be part of a high-growth, team-centric environment where innovation thrives and collaboration fuels success. Having raised over $235m to date led by investors such as the SoftBank Vision Fund 2 and operating at a global scale, we offer unparalleled opportunities to work cross-functionally, solve complex challenges, and drive meaningful impact in the future of connected digital commerce. If you're curious, ambitious, and energized by big ideas, Firework is the place to grow, lead, and shape the next era of online shopping-together. SummaryWe are seeking Live Show Hosts to lead livestreamed product showcases for a well-known technology brand. This role is ideal for creators who possess on-camera confidence, technical livestreaming skills, and the ability to bring products to life in front of a remote audience. You will be responsible for hosting shows, running OBS, managing multi-camera production, and filming supporting content-all from your home studio setup.What You'll Do Host 60-90 min livestreams with energy, personality, and audience interaction. Run OBS to manage livestream transitions, overlays, and multi-cam shots. Film B-roll content for event promos and social cutdowns. Attend product briefings and tech rehearsals for event preparation. Deliver high-quality recordings for post-event content use. Optionally share pre-event posts on your own social channels (not required). Schedule & Work Expectations Freelance / 1099 role to start, with potential to transition to part-time employee based on performance and client feedback. On-site only - all rehearsals, training, and livestreams take place at Firework's San Mateo studio. Average weekly commitment is typically 5-10 hours, including rehearsal, preparation, and show time. Hours may increase for clients with multiple shows per month or complex products. Work generally will not exceed 15 hours per week. Majority are Weekdays- most of the livestreams are filmed on weekdays, there will be rare chance to be weekends but we will plan and notice in advance Shows and rehearsals typically occur between 8:00 AM and 8:00 PM PT, depending on client schedule. What We're Looking For OBS expertise (non-negotiable)-must be comfortable running your own livestream setup. Experience with multi-camera production and B-roll filming. Strong on-camera presence-hosting, UGC, livestreaming, or influencer experience preferred. Professional home studio setup: HD camera(s): DSLR, mirrorless, or pro webcam Ring light or lighting kit Quality mic & stable Wi-FiClean, well-lit backdrop or set Holiday season availability is a plus but not required. Compensation- Pay: $1,200-$2,000 per project depending on scope & experience- Contract: Freelance / 1099 contractor- Usage Rights: Livestream recording may stay live for 12 months; edited clips for 3-6 months Self-Tape Video Requirements- Length: Record a 3-minute video using any tech product of your choice.- Format: One continuous take - no edits or cuts- Orientation: Vertical- Production: Clear audio and even lighting (external mic preferred)- Multicam / Live Switching (required): Use a multicam setup with at least two camera angles (e.g., wide + product close-up). Switch between angles live during the single take using OBS (or equivalent). Include at least one basic overlay or lower-third to demonstrate live production control.- Accessibility: Video link must be viewable by anyone with the link Reference (preferred style & production):Watch example ************************************* VyGk - match the pacing, live-host energy, and multicam switching shown. Content (cover all items):a) Choose any tech/electronic product (e.g., headphones, portable charger, gaming controller, electronic beauty tool).b) Present as if hosting a live show (engage audience, reference chats/giveaways, simulate live interaction).c) Explain key features and benefits - be creative but realistic.d) Demonstrate product where possible (fit, comfort, sound, functionality).e) Explain how the product improves daily life.f) Close with a clear call-to-action. Submission InstructionsSubmit one of the following options:1) Upload your self-tape link and headshot in the application form, or Email your video link and headshot to ******************** Email subject line: [Your Name] - Remote Live Show Host Submission Keep it authentic, audience-forward, and live-ready - we want to see your hosting presence and real-time production skills (multicam + OBS).

Job Description As a Delivery Assurance Specialist (DAS), you will be working as a vital link between the Prime Aerospace customers and their supplier base to improve delivery performance by tracking, validating, expediting and reporting real time part delivery status. Applicants must have solid manufacturing experience with focus on root cause analysis and effective interpersonal communication skills with the ability to develop strong relationships. Responsibilities and Duties Track the flow of critical/hot parts through the suppliers manufacturing shop from the raw material phase, through manufacturing, quality, shipping and delivery to the customer. Proactively work with the supplier to monitor all parts to support On-time deliveries to our aerospace customers Drive actions to mitigate potential delivery delays by identifying risks, performing root cause analysis and development of recovery plans to bring shipments back in-line with customer requirements Create daily status reports and communicate actions and plans to all stakeholders with our customers, prime aerospace manufacturers throughout the day Monitor production operations and identify manufacturing process improvement opportunities Prepare presentations and lead meetings Qualifications and Skills Manufacturing Experience - 5-10 years, preferably in Machine Shop/Sheet Metal Bachelor's degree (or higher) in supply chain management, production control, procurement, business, quality assurance or related field (preferred qualification) Experience working on process improvement teams or possess Six Sigma certification (preferred) Proficient with Microsoft Office Products (2010 Excel basic skills required) Strong interpersonal communication and problem solving skills Reliable transportation - must have current/active drivers' license US Citizenship required Background check and drug screen will be administered Valid drivers license and auto insurance required. WORKING CONDITIONS Productivity: Incumbents must perform work in an efficient, effective, and timely manner with minimal direction. Mobility: Incumbents are required to participate in assigned physical activities which may include light lifting and sitting for prolonged periods of time. Vision: Vision sufficient to read printed documents, computer screens, and observe behavior of others. Environment: Typical office conditions, directly working Quality management team, working with the SMS team, and external customers. Other Factors: Typical hours worked are Monday - Friday from 8:00 a.m. - 5:00 p.m. Incumbents may be required to work occasional extended hours and weekend overtime. The employee frequently is required to use hands or finger, handle, or feel objects, tools, or controls. The employee is occasionally required to stand; walk (approximately 1-2 miles a day); sit; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. Employee will occasionally drive long distances to and from various suppliers as needed. The employee must occasionally lift and/or move up to 20 pounds. Specific vision abilities required by this position include close vision, distance vision, color vision, peripheral vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high. BENEFITS: 12 days paid vacation first year, increasing with service years 10 days paid sick time 11 paid holidays Healthcare insurance available: Medical, dental, vision, STD, LTD, critical illness, life insurance for self and dependents Champ Plan Wellness and Health Free to employees working minimum 20 hours/week with anticipated $30k/annual earnings Participation increases net take home pay $$$ in most instances Free wellness initiatives Free tele-health Free and discounted RX Auto enrollment (unless tax elections result in negative impact) Eligible on the 1st of the month following 30 days of continuous employment requires monthly 10-minute wellness activity participation 401k retirement savings with match Eligible on the first (1st) of the month following 90 days of continuous employment 100% match of 1st 3% contribution 50% match of next 2% contribution IMMEDIATE VESTING Company-provided cell phone, laptop, mobile wi-fi (for business use only) Regular Hourly rate for travel time Direct Pay Travel arrangements for flights, hotels and rental cars Travel Reimbursements direct deposited with each payroll Federal rate Mileage reimbursement (.67/mile 2024) when driving personal vehicles on company business Per diem reimbursements for meals and incidentals Overnight trips - Up to $75 Leaving home after 4 pm $40 Federal rate mileage reimbursement (.67/mile 2024) when driving personal vehicles on company business Direct Pay Travel arrangements for flights, hotels and rental cars Travel Reimbursements direct deposited with each payroll Per diem reimbursements for meals and incidentals Overnight trips - Up to $75 Leaving home after 4 pm $40 $1500 EMPLOYEE REFERRAL BONUS Initial $750 paid upon hire of qualified referred employee (rehires excluded) Additional $750 paid upon referral's full completion of 90 days' employment Pay Range: $60,000 - $80,000 Annually. Please note that the salary information is a general guideline only. TRIGO ADR considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and business considerations when extending an offer. Company Overview TRIGO ADR Americas is the leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. Trigo provides a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Trigo's team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results. TRIGO ADR Americas is an Equal Opportunity Employer, including disabled and veterans, and may require US Citizenship for employment on certain defense contracts subject to ITAR restrictions. All qualified candidates will receive consideration. Except where otherwise provided by law, selection will be made without regard to, and there will be no discrimination because of race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying physical or mental disability, age, sexual orientation, gender identity, genetic information, membership or non-membership in an employee organization, or on the basis of personal favoritism or other non-merit factors. Powered by JazzHR oB4Z5dzwP8

McKesson is an impact-driven, Fortune 10 company that touches virtually every aspect of healthcare. We are known for delivering insights, products, and services that make quality care more accessible and affordable. Here, we focus on the health, happiness, and well-being of you and those we serve - we care. What you do at McKesson matters. We foster a culture where you can grow, make an impact, and are empowered to bring new ideas. Together, we thrive as we shape the future of health for patients, our communities, and our people. If you want to be part of tomorrow's health today, we want to hear from you. As a Software Engineer at CoverMyMeds, you'll create solutions that make our healthcare system work more efficiently and effectively in order to help millions of people receive their prescription medications every year. You'll build products that our partners in healthcare use every day and innovate products that don't even exist yet. You'll work on small, cross-functional and collaborative teams with endless opportunities to take on responsibility, continue learning and mentor others. What You'll Do CoverMyMeds has built many products to solve complex Healthcare problems. You'll help build solutions with Product Alignment, and contribute to our applications in many ways, including the following: Design and develop web applications and APIs for the CoverMyMeds product line Jump into both the front-end and back-end of solutions, with the exact balance depending on the project and team Will be working with Ruby on Rails, React, JavaScript, PostgreSQL, Kubernetes, Docker, MSSql, Git, Redis and Sidekiq Own the quality of the solutions you create through automated testing, and support and maintain your solutions after they're in production Contribute to a productive agile environment by partnering closely with necessary stakeholders, deploying often and inspecting and adapting as needed Partner with technology platform teams to identify required cloud-native capabilities and implement while adhering to industry best-practices EHR Integration Engineering Team: Our team supports backend API's that integrate Providers, Payers and Pharmacies to automate the electronic RX Prior Authorization process. About You Minimum Qualifications: Degree or equivalent and typically requires 4+ years of relevant experience Critical skills: 4 + year's of experience in back-end web development Familiarity with Ruby on Rails, React, JavaScript, PostgreSQL, Kubernetes, Docker, MSSql, Git, Redis and Sidekiq Familiar with FHIR and EHR Integrations Proficient in development SQL database software Helpful to have some familiarity with tools like Postman, DataDog & Splun Preferred Skills: Desire to empathetically share and receive feedback and knowledge to help everyone keep improving Thrive at working closely with a team to find solutions collaboratively Able to effectively explain your choices during problem-solving Great at communicating technical concepts to non-technical audiences We are proud to offer a competitive compensation package at McKesson as part of our Total Rewards. This is determined by several factors, including performance, experience and skills, equity, regular job market evaluations, and geographical markets. The pay range shown below is aligned with McKesson's pay philosophy, and pay will always be compliant with any applicable regulations. In addition to base pay, other compensation, such as an annual bonus or long-term incentive opportunities may be offered. For more information regarding benefits at McKesson, please click here. Our Base Pay Range for this position $106,900 - $178,100 McKesson is an Equal Opportunity Employer McKesson provides equal employment opportunities to applicants and employees and is committed to a diverse and inclusive environment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age or genetic information. For additional information on McKesson's full Equal Employment Opportunity policies, visit our Equal Employment Opportunity page. Join us at McKesson!

Job SummaryThe Manufacturing Process Engineer position assumes the programming/operation/training of all equipment and develops/implements optimal, cost-effective manufacturing processes and methods in accordance with product specifications and quality standards. Recommends and implements improvements to production processes, methods and controls, coordinates manufacturing launch for new or revised products. One of the primary responsibilities for the Process Engineer II is to handle programming and training for all equipment for the facility with an emphasis on those that have Programmable Logic Controller (PLC) controls.Manufacturing Process Engineer - Second Shift Location: Independence, OH (Cleveland Area) Division: Copper & Brass Sales - New Launch Opportunity! Salary Range: $80,000 - $110,000 Employment Type: Full-Time, Onsite Eligibility: Must be legally authorized to work in the U.S. without sponsorship. Job Description Summary This is a HOT role in our brand-new Copper & Brass Sales Division! As a Manufacturing Process Engineer, you'll serve as a Subject Matter Expert (SME) on advanced equipment and automation systems, including PLC-controlled routers, waterjets, CNC machines, saws, and robots. You'll lead process improvements, optimize manufacturing methods, and drive efficiency in a high-impact environment. Key Accountabilities Act as SME for equipment requiring PLC (routers, waterjets, CNC machines, saws, robots). Evaluate and develop manufacturing processes through research, design, and collaboration with vendors and operators. Provide decision-making insights by calculating production, labor, and material costs; reviewing schedules; and forecasting requirements. Prepare product and process reports by analyzing trends and data. Ensure compliance with government regulations and maintain product reputation. Keep equipment operational through proactive maintenance coordination and adherence to manufacturer guidelines. Oversee product and process databases, including programming and data entry. Lead development of an apprenticeship program and formal internship initiatives for new employees. Drive process improvement initiatives, problem resolution, and employee training. Improve manufacturing methods for cost reduction, quality improvement, and efficiency. Maintain detailed layouts of buildings and equipment. Assist in improving systems related to production control, SOPs, safety, and quality standards. May rotate shifts initially for training purposes. Qualifications Minimum Requirements: Bachelor's degree in Manufacturing Technology preferred; Associate degree in Engineering discipline acceptable. 3-5 years of experience in a technical or manufacturing field (equivalent experience considered in lieu of degree). Knowledge of manufacturing processes, fabrication methods, and tool design. Familiarity with manufacturing equipment and quality assurance techniques. Ability to work independently and self-motivate. Commitment to health, safety, and environmental standards. Strong problem-solving and teamwork skills. Preferred Requirements: Proficiency in relevant software (CAD, MS Office). Solid project management skills. Strong communication skills and ability to manage fluctuating workloads independently. Why Join Us? Be part of a high-visibility launch in a new division. Opportunity to shape processes and standards from the ground up. Competitive salary: $80,000-$110,000 plus comprehensive benefits. Career growth in a dynamic, innovative environment. Equal Opportunity Employer At thyssenkrupp Materials NA, we value diversity and inclusion. We are an Equal Opportunity Employer and do not discriminate based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected status. Ready to engineer the future? Apply today and help us build the Copper & Brass Division at tk MNA in Independence, OH! Job Compensation $80,000 to $110,000 + Other Incentives! Benefits Overview We offer competitive company benefits to eligible positions, such as: Medical, Dental, Vision Insurance Life Insurance and Disability Voluntary Wellness Programs 401(k) or RRSP programs with Company Match Paid Vacation and Holidays Tuition Reimbursement And more! Benefits may vary based on job, country, union role, and/or company segment. Please work with your recruiter or tk representative for applicable benefits information. Disclaimer This is to notify the general public that some individuals/entities are using the thyssenkrupp (“TK”) name, trademark, domain name, and logo without authorization. They are posing as employees, representatives, or agents of TK and its associated/group companies. These individuals/entities are fraudulently offering jobs online through texts, websites, telephone calls, emails, or by issuing fake offer letters. They are also soliciting jobseekers to deposit money in certain bank accounts or providing jobseekers with fraudulent checks to obtain banking information. TK does not ask, solicit, or accept any monies in any form from candidates, job applicants, or potential jobseekers, who have applied to or wish to apply to TK, whether online or otherwise as a pre-employment requirement. TK bears no responsibility for money being deposited/withdrawn therefrom in response to such fake offers. TK does not: 1. Send job offers from free email services like Gmail, Rediffmail, Yahoo mail, etc.; 2. Request payment of any kind from prospective jobseekers or candidates for employment; 3. Authorize anyone to collect money or agree to any monetary arrangement in return for a job at TK; 4. Send checks to job seekers; or 5. Make job offers through third parties. In the event TK uses professional recruitment services through a third party, offers are always made directly by TK and not by any third parties. PLEASE NOTE: 1. TK strongly recommends that potential jobseekers do not respond to such fake solicitations, in any manner; 2. TK will not be responsible to anyone acting on an employment offer that is not directly made by TK; 3. Anyone making an employment offer in return for money is not authorized by TK; and 4. TK reserves the right to take legal action, including criminal action, against such individuals/entities. TK follows a formal recruitment process through its own HR department and applications are evaluated by its HR department through pre-defined processes. Please visit our official careers website at ******************************** to view authentic job openings at TK. If you receive any unauthorized, suspicious, or fraudulent offers or interview calls, please email us at **********************************************. We shall not accept any liability towards the representation made in any fraudulent communication or its consequences, and such fraudulent communication shall not be treated as any kind of offer or representation by TK or its group companies and affiliates.

This position will be responsible for standard operating/production procedures, safety, quality control, and continuous improvement initiatives of the production area. The Group Leader position will provide support and leadership within the manufacturing team providing the necessary training, problem resolution, and team development. This position will also provide support and assistance to other departments as necessary. ESSENTIAL DUTIES and RESPONSIBILITIES Will supervise Team Leaders and Associates and will be responsible for the overall operations of the production area. Support an annual operating plan for department to support company operation planning cycle, including capital and expense budget requirements and be accountable to operating plan and financial commitments. Lead improvements activities for quality, delivery, cost and safety objectives and will support continuous improvement. Participate in a teamwork atmosphere and contribute to various continuous improvement project activities such as defect rate(s) investigation, standardized work improvements, cost-downs or other improvement activities. Responsible for personnel planning and scheduling with an emphasis on containing overtime. Responsible for identifying training needs and development for department team members. Coordinate activities associated with new product planning and launch. Support company policies, procedures and administer those policies fairly and consistently. Responsible for ensuring standardized work procedures are properly followed. Responsible for maintaining production efficiencies and team measurables through lean manufacturing principles, human resources planning, and flexibility. Provide assistance or perform machine troubleshooting and repairs, set-ups, tool changes, preventative maintenance and routine machine checks. Facilitate good communications with team leaders and team members for establishing expectations and problem resolutions. Must be able to successfully lead and function within a team environment and be able to adapt to change. Will plan and facilitate new and existing associate training. Responsible for 5s activities. Will coordinate activities with other Group Leaders and Team Leaders from other shifts. Ensure PM schedule is followed properly and train when necessary. Must be receptive to training and performing functions in multiple areas. Responsible for line productivity, safety, quality, and other performance indicators in coordination with the Team Leader. Maintain safety and address concerns immediately. Must ensure that all safety procedures and practices are implemented and followed. Responsible for covering Team Leader absences as necessary. Must have ability and willingness to fill in online if necessary. Recognize and define problems, collect data, and develop conclusions. Communicate effectively with others using both oral and written communication skills. Assist in the development of policies and procedures. Other duties as required. POSITION QUALIFICATIONS Must have supervisory knowledge in a lean manufacturing environment. Must display leadership ability, able to influence others to perform their jobs effectively and to be responsible for making decisions. Ability to inspire oneself and others to reach a goal and/or perform to the best of their ability. Ability to comprehend complex technical topics and specialized information. General understanding of mechanical blueprints is preferred. Must be able to manipulate and analyze various forms of mathematical information and data. Must have general understanding of cutting tools and materials. Must have general understanding of production control in mass-production manufacturing. Ability to use thinking and reasoning skills to solve a problem. Ability to read and follow work instructions, procedures and policies. Must possess the ability to problem solve, troubleshoot and or use proven troubleshooting methods. Ability to use thinking and reasoning to solve a problem. Must have solid problem solving skills using a variety of statistical and root cause tools. Experience with lean production philosophy. Positive attitude to support company policies and must be able to create and maintain a high-morale environment. Must be able to adapt to change in the workplace and demonstrate flexibility with new ideas and different environments. Ability to work overtime and weekends when necessary. Ability to deal with stress and emergency situations. Must be able to provide training in an effecting manner. Must be able to work any shift and overtime as needed. Ability to perform work accurately and thoroughly. Ability to work independently with minimal supervision. Ability to be truthful and be seen as credible in the workplace. Ability to make decisions or take actions to solve a problem or reach a goal. Must be organized or follow a systematic method of performing a task. Ability to effectively present information publicly. Ability to find a solution for or to deal pro-actively with work-related problems. EDUCATION High School Diploma or GED required. Associate degree and/or five (5) or more years of experience in a high-volume manufacturing environment. EXPERIENCE Must have prior experience in high volume manufacturing. Three (3) plus years in supervision strongly preferred. Must demonstrate the ability to operate all manufacturing equipment and processes in the designated area or be able to in a reasonable period of time. Must possess a strong mechanical aptitude and ability to apply mechanical principles in various troubleshooting and repair activities. Prior machine troubleshooting and repair is a must. COMPUTER SKILLS Ability to operate computerized equipment is required. In addition, must have working knowledge of PC applications. Will be required to attend training as necessary. CERTIFICATES & LICENSES Certificates or diplomas from an accredited college or skill center in machining or machine tool manufacturing highly desired. WORK ENVIRONMENT · This position is required to work in manufacturing environment facility. While performing the duties of this job, the employee is frequently exposed to work near moving mechanical parts. · The noise level in the work environment is usu ally moderate. Job Location: SRS Building Products - Williamsburg3730 State Route 133 Williamsburg, OH 45176As an Equal Employment Opportunity (EEO) employer SRS Distribution Inc., including all its subsidiaries, provides job opportunities to qualified individuals without regard to actual or perceived race, color, creed, religion, national origin, sex, gender, age, disability, gender identity, sexual orientation, citizenship status, uniform service, veteran status, marital status, genetic information, physical or mental disability, or any other characteristic in accordance with applicable federal, state, and local EEO laws. If you are an individual with a disability or a disabled veteran and require a reasonable accommodation in applying for any posted position, please contact Human Resources at US: ************, or by email to: *************************** with the nature of your accommodation request and include the Business name, location and title of the job opening. Please allow one (1) business day for a reply. All employment offers are contingent upon successful completion of a background check and drug screen, as permitted by law. • Competitive salaries for all team members paid weekly • 401(k) Retirement Plan with company matching • Employee Stock Purchase Program • Paid Vacation, Sick Time, Volunteer Day, Holidays, Birthday, and Floating Holidays • Medical, Dental and Vision Benefits

Job Title: Match Production Intern Department: Match Presentation Reports to: Sr. Manager of Match Presentation The Match Production Intern is a key position within the FC Cincinnati and TQL Stadium team. This position will be responsible for assisting the overall production/control room at TQL Stadium. The role will also manage, load, and quality control all content and graphics for the scoreboards and ribbon boards at TQL Stadium. The Match Production Intern must have exceptionally strong communication, creative and organizational skills and be deadline-driven in execution. Creativity, strong attention to detail, dedication, hard work and passion for soccer are paramount to success in the position. A strong understanding and familiarity with key match presentation skills - organization, performance and live entertainment production skills - are necessary. This position will begin in January 2026 and conclude in December 2026. What You'll Do: Work with the Manager and Coordinators of Game & Event Production to manage, load, and quality control all content for the videoboards at TQL Stadium Manage MLS rosters, headshots, and statistical information for both home and away teams for in-stadium use Responsible for all administrative duties relating to game and event production & presentation needs Create graphics for in-stadium use when assigned Learn all positions in the Control Room and assist with troubleshooting when necessary Assist with creation of gameday documents Assist with requesting content from internal departments and organizing upon receipt Assist with game and event records, as well as distributing requested deliverables to internal departments Work with Director and Sr. Manager Production to build and test equipment around the stadium in preparation for FC Cincinnati home games and TQL Stadium events (as needed) Fill in on event days for control room positions as necessary Perform various other tasks that may be assigned from time to time Download and sort files Cut Game Records What You'll Bring: Proficiency with Adobe Creative Suite required Understanding of videoboard specs Proficient with Sony camera Experience editing (self or other) film projects Experience working in a Production Control Room preferred Experience with Ross Xpression and Daktronics systems is a plus Excellent interpersonal skills with ability to connect with, and relate to, all levels of staff, management, clients, and vendors General understanding of MLS rules, teams, and players is a plus Ability to multi-task and effectively adjust to rapidly changing market and business conditions. Demonstrated work ethic with an innate sense of urgency and tenacity Team oriented attitude, relationship building, professional demeanor and appearance Strong computer skills including experience with MS Office products, including but not limited to, Word, Excel, and Outlook with the ability to learn new programs Strength in time management, administrative ability, organization, and customer service skills Ability to work a flexible schedule including nights, weekends and holidays What You'll Need: Currently pursuing or obtained bachelor's degree in Broadcasting, Journalism, Film, Mass Media or related field or equivalent experience Excellent customer service skills and ability to positively engage fans, sponsors, and key stakeholders. Ability to work efficiently in a fast-paced environment and make quick decisions. A strategic planner with the ability to execute at a high level to bring the plan to life. Effective verbal and written communication skills. Attention to detail and strong organizational skills. Experience with integration of multi-branded marketing and sponsorship environment. Ability to independently resolve issues and manage issues effectively. Exceptional organizational skills with superior attention to detail Computer skills necessary, knowledge of Microsoft Office and Excel required. Work Hours: In addition to normal business hours, weekend, evening, and holiday work will be required as schedule and project workload dictates. Travel, including international, may be required. Why You'll Love FCC: FCC welcome gifts Resume and profile reviews Tour of TQL Stadium and MHTC Community volunteer opportunities Discount off team store merchandise Job shadow opportunities Paid hourly and/or college credit opportunities About FCC Founded in 2015, FC Cincinnati is a Major League Soccer team based in Cincinnati, Ohio. After achieving significant growth and success in the United Soccer League, the team joined MLS in 2019. FCC won the 2023 Supporters' Shield - the annual award given to the team with the most points in the regular season - and clinched a spot in the 2023 MLS Playoffs for the second straight year. With a diverse ownership group with strong ties to Cincinnati, the club strives to unite the community both on and off the pitch through FCC Foundation, and its dedication to improving the lives of children through soccer and those in the West End Community. FC Cincinnati are committed to ongoing growth and recognizing the vital importance of company culture. The club's DNA code, created by the staff for the staff, is actively implemented every day. FCC have been recognized locally and nationally as one of Sports Business Journal's Best Places to Work in Sports 2023, named to the Honor List as one of “75 Great Sports Companies to Call Home.”; on the Business Courier's Fast 55 as one of Greater Cincinnati's fastest growing private companies; and named to The Enquirer's Top Workplaces 2024. Learn More! TQL Stadium: learn more Mercy Health Training Center: learn more MLS NextPro: learn more FC Cincinnati is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Job Description Ajax Tocco Magnethermic (ATM), a subsidiary of ParkOhio, traces its roots back to the 1800s and has a rich history of excellence in induction heating and melting solutions. The present company was formed in 1959 when the Magnethermic Corporation acquired the assets of Ajax Electrothermic Corp. combining their expertise and capabilities. Job Duties Communicate effectively with customers and internal teams using verbal and written communication. Use Microsoft Project to present accurate project details to customers and management. Develop strong professional relationships with current and potential customers. Train other project managers to be organized, efficient, and proficient. Review contracts and purchase orders to understand payment terms, job cost estimates, and project schedules. Generate and revise project schedules; communicate changes to customers and internal teams. Process engineering releases (PORs and POCs) in a timely manner. Monitor project status and provide input as needed. Ensure cross-functional teams (Sales, Material, Engineering, Production Control, Manufacturing, Test, and Paint) meet scheduled commitments. Identify and report potential or actual project delays, including long-lead parts. Compare actual costs to budgeted costs and collaborate with teams to reduce costs while maintaining quality. Report budget overages to upper management with specific causes. Schedule and lead conference calls and meetings with customers to provide project updates. Occasionally travel to customer facilities as needed. Communicate potential delays to the sales team in advance. Coordinate with accounting to ensure timely invoicing and follow up on unpaid invoices. Provide weekly or as-needed project updates. Maintain complete project folders, including equipment photos after shipping and during loading. Build customer relationships to support future business opportunities. Advise the sales team of potential new business. Seek opportunities to improve efficiency and reduce waste across the organization. What you need to be successful: Bachelor's degree from an accredited college or university (preferred). Excellent communication and negotiation skills. Strong proficiency in Microsoft Office, including Microsoft Project. Project Management Professional (PMP) certification (preferred). Ajax Tocco Magnethermic is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

This position sits within our Training & Presales division, which is responsible for external client training, advanced sales/product demonstrations, internal product training, and ongoing support/partnerships with internal stakeholders. The Opportunity The most important thing you will do at ConstructConnect is to find ways to “delight the customer”, with outrageous, passionate customer service and support. On the Training & PreSales Team, we do this by guiding our customers through all the stages of adopting new technology including the initial consideration, the implementation, and the ongoing support of their new software. Responsibilities What You'll Be Doing TRAINING - Provide scheduled product training sessions to new and existing customers in both classroom and online training environments. As our products evolve, be able to update curriculum and documentation. Document training path of our clients in CRM. Responsible for being a subject matter expert on ConstructConnect Project Intelligence and one of the following takeoff product collections, and can transfer detailed product usability knowledge to both customers and prospects. On-Screen Takeoff, Takeoff Boost™, Quick Bid, Digital Production Control; PlanSwift, Supported Plugins and Starter Packs. PRESALES SUPPORT - Support the Sales Team by sharing expertise and specialized, custom demonstrations of our software solutions TICKET QUEUE - Share in team responsibility for resolving inbound Takeoff product user requests for Estimator Assistance ON-GOING EDUCATION - Maintain an expertise on each of our ever-evolving software products as well as the industry they serve INTERNAL TRAINING - Occasional training of internal team for the purposes of onboarding and increasing product and industry expertise PRODUCT MANAGEMENT SUPPORT - Occasionally provide consultative support to Product Management Team as directed by management. MARKETING TEAM SUPPORT - Occasionally support Marketing efforts with our presence trade shows, hosting prospect webinars, review of white papers, or by producing written content ONLINE RESOURCING - Occasional support of Documentation and Media Design team members in reviewing content for user guides and training media TRAVEL - Occasional travel may be required for Custom Client Training, Regional Classroom Training, Trade Shows, and Association Conferences. MISC - Extended hours of sitting, standing, and speaking required This job description in no way implies that the duties listed here are the only ones that team members can be required to perform Qualifications What You Bring to the Team Experience in delivering both classroom and online training (to both groups and individuals). Must present a professional, clear, and engaging approach. Excellent verbal, interpersonal and written communication skills Excellent problem-solving skills with ability to analyze situations, identify existing or potential problems and recommend solutions (Head's up. There will be math.) Ability to work closely and efficiently with a team of training professionals Ability to multi-task in a fast-paced environment Organization and efficiency in time and task management Outstanding professionalism in providing a world-class training experience Sound business ethics, including the protection of proprietary and confidential information Ability to work with all levels of internal staff, as well as outside clients and vendors Creative, innovative disposition General proficiency in the use of most common business software, i.e., Office 365, Zoom, Salesforce, etc. Experience using digital takeoff and estimating products such as On-Screen Takeoff, Quick Bid, Digital Production Control, ConstructConnect Takeoff, PlanSwift, and Quotesoft. Degree or experience in construction science, estimating, or project management Experience in general contracting, commercial, residential, or non-drywall subcontracting Accomplished public speaking skills Experience with Camtasia a plus Physical Demands and Work Environment: The physical activities of this position include frequent sitting, telephone communication, and working on a computer for extended periods. Visual acuity is required to perform activities close to the eyes. Team members are expected to maintain a dedicated and ergonomically appropriate remote workspace. Team members who live within commuting distance of one of our office locations (Greater Cincinnati/Northern Kentucky or Atlanta, Georgia) are expected to work in a hybrid capacity, with regular in-office presence every Tuesday and Wednesday each week. All team members must reside and perform their work within the United States. E-Verify Statement ConstructConnect utilizes the E-Verify program with every potential new hire. This makes it possible for us to make certain that every employee who works for ConstructConnect is eligible to work in the United States. To learn more about E-Verify you can call ************** or visit their website. E-Verify is a registered trademark of the United States Department of Homeland Security. Privacy Notice

Job Details Jefferson Industries Corp - West Jefferson, OH Full Time None Third ManufacturingCompany & Job Details As the North American headquarters for G-TEKT Corporation, Jefferson Industries actively participates in the Global Automotive Industry. As part of our involvement, Jefferson Industries Corporation offers design and development for press dies and other tools necessary to produce automotive products. We embrace programs for product development including product design review and Advanced Product Quality Planning. Our facilities support high quality product manufacturing, and we provide a timely and flexible approach to meeting the needs of our customers. We are actively seeking Team Leaders to join our Hot Stamping Department on 3rd shift (core schedule, Sun - Thurs, 10:00pm - 6:30am) ESSENTIAL DUTIES & RESPONSIBILITIES: SAFETY Supports safety program by promoting safety, providing training opportunities and enforcing safety policies. Track and monitor Associate safety to meet established target goals. QUALITY Supports TQM fundamentals into daily management practices throughout the responsibility area of Hot Stamping Operation. Provides the leadership and supervision required to guide the efforts of the responsibility area of Hot Stamping team. Root Cause should be identified and counter-measured (SNAP). COST Supports the management of Hot Stamping budget and costs. Reviews production and operating reports and directs the resolution of operational manufacturing and maintenance problems to ensure minimum costs and prevent operational delays. DELIVERY Helps to establish and maintain production control and management standards. Verifies that Associates are trained and are following operating standards. Coordinates Hot Stamping activities with all other functions of the operation to obtain optimum production and utilization of human resources, machines, and equipment. MANAGEMENT Responsible for supervising assigned Production Associates engaged in either in Hot Stamping or Laser Cutting operation. Provides guidance and mentorship to assigned Hot Stamping team members to ensure a high level of work satisfaction, technical advancement, and progress towards individual career goals. Audits the process flow of product through assigned area to ensure production is on schedule and meeting cycle time expectations. Supports production Associates and fills in to perform duties as required. Trains new Associates as required. Audits that assigned Associates have received expected operating training and are following outlined operating and quality standards Ensures all established costs, quality, and delivery commitments are met Responsible to ensure company communications are delivered and understood by Associates. Communicates upward to appropriate person any Associate concerns and issues. Demonstrates ability to work independently with little or no supervision. Accepts job assignments and changes in positive manner, takes responsibility for own and team's performance and job assignments. Seeks out new assignments, proposes improved work methods and finds better ways to complete tasks. Performs other duties which may be assigned. PDCA Supports PDCA fundamentals into daily management practices in Hot Stamping operation. JIC associates are eligible for a comprehensive and competitive compensation and benefits package, including: Compensation: Weekly Pay $22.00/hour starting wage, plus $0.50 per hour shift premium for working 2nd or 3rd shift Base-Rate Pay increase every three (3) months for the first year Additional $1.00/hour at 5 and 10 years of service Holiday Pay Shutdown Pay Summer - around July 4th holiday Winter - around Christmas/New Year's holiday Monthly Perfect Attendance Bonus Annual Perfect Attendance Bonus Bi-annual TEAM Achievement Bonus Annual Profit Share Bonus Benefits: Paid vacation Three (3) medical options to allow you the flexibility to choose what level of coverage best fits you and your family's needs Flexible Spending Accounts (medical and dependent care) Free Dental & Vision (must be enrolled in medical benefit) Voluntary Supplemental Life Insurance Hospital Indemnity Group Accident Critical Illness Company-paid Short-term Disability Long-term Disability Basic Life & AD&D Employee coverage - 2 times annual base earnings Spouse - flat $10,000 Child - flat up to $5,000 401k Retirement Traditional Contribution ROTH Contribution Company Match 401k Retirement Profit Share Funded 100% by Company based on a percentage of eligible earnings each quarter Eligible regardless of participation in 401K Retirement Referral Bonus Tuition Reimbursement Safety Equipment Reimbursement (safety boots & prescription safety glasses) Company-paid uniforms, including laundering Tickets@Work - web-based discount program (hotels, car rental, tickets, etc.) JOB SKILLS AND REQUIREMENTS JOB SKILLS AND REQUIREMENTS Previous experience in an manufacturing environment, preferred Ability to repeatedly bend, stoop and twist throughout shift Ability and willingness to work overtime as required to meet business objectives overtime may be daily and/or weekend Possess skills to communicate with associates, management team, other department managers and senior management. Stong communcation to provide direction and motivation to team members. Able to motivate associates and team members to keep process and equipment in good condition to assure smooth running operation. Able to quickly ascertain a situation and be decisive in identifying defects and solving problems with equipment and process to avoid missed quality, delivery, or safety concerns. Develop task list and assure on-time implementation of tasks. Able to operate with basic computer skills, including preparing memos and responding to emails. Must successfully pass pre-employment drug screen and physical EDUCATION, MATH, LANGUAGE AND/OR EXPERIENCE High school diploma or general education degree (GED); Twelve to 36 months related experience. Ability to read and comprehend instructions, correspondence, and memos. Ability to present information in one-on-one and small group situations. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratios, and percent to draw and interpret mathematical data. EXPECTATION OF A STRONG TEAM LEADER Must be passionate, highly motivated individual to lead a Hot Stamping team. Performs above Essential Duties & Responsibilities in satisfactory manner. Works on building relationships and collaborating with production team members to ensure proper utilization of lines and equipment. Must be self-starter with own continuous improvement agenda. Must have an energy level and attention to detail that routinely delivers expected

Installs T-nuts into side plates and backs. Lays out, positions, aligns, and fits components together in a fixture jig. Utilizes radial arm saw to cut 2X2's and 2X4's for WIP and final assembly products. Steps final assembled steps for spray booth. Rolls sprayed applications to a smooth coat of materials on a finished product. Cuts off excess material from the steps and grinds the bottom of the steps smooth. Double stacks and wrap steps and moves them into warehouse for storage. Responsible for quality checks on steps which includes repairing any defects on finished products. Lays out, positions, aligns, and fits components together. Clamps and welds parts to secure in position for welding. Sets up equipment and welds parts, using gas MIG welding and equipment. Repairs products by dismantling, straightening, reshaping, and reassembling parts. Cleans and sweeps welding booth. * Painting Vacuum Formed Skirting Mixes paints needed for daily production. Applies paints to vacuum formed skirting using the standard methods. Ensures panel appearance is consistent from piece to piece. Ensures appearance quality meets established standards. Stores vacuum formed skirting panels for drying. * Production Control Use computer system to report shop floors. Maintains inventory on raw materials and other supplies used in department. Track daily paint usage for EPA reporting. * Production Packages daily production on pallets for shipments to warehouse. Applies labels to daily production. Responsible for keeping work area clean. Follows all safety rules and procedures. Performs activities in accordance with the procedures outlined in the work instructions. Other duties may be assigned by supervisor as needed. GENERAL KNOWLEDGE, SKILLS & ABILITIES What computer skills are needed for the job? Are there any special tools or certifications required for this job? Are there any other special requirements of the job? * High school diploma or general education degree (GED). * To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. * Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. * Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. * The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and talk or hear. The employee frequently is required to walk and reach with hands and arms. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 250 pounds. Specific vision abilities required by this job include peripheral vision, and ability to adjust focus. * The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * While performing the duties of this job, the employee is regularly exposed to fumes or airborne particles. The employee is occasionally exposed to moving mechanical parts. The noise level in the work environment is usually loud. BEHAVIORAL COMPETENCIES: * Demonstrates Customer-First attitude and behavior * Ability to be a team player committed to the success of the business * Excellent performance as evidenced by results produced * Operates from a clear set of positive values and principles * Has high moral character * Proactive and takes initiative; able to take risks * Committed to continuous learning * Ability to multi-task * Demonstrated abilities/skills in problem, decision making, and conflict resolution The above description covers the principal functions of the job. It is not intended to be a complete listing of all miscellaneous, incidental or similar tasks which may be assigned during normal or emergency operations.

It's fun to work in a company where people truly believe in what they are doing! Primary Responsibilities Technical Director with Ross Overdrive automation. ENG/Production field acquisition with Sony cameras, Dejero bonded cellular. Editing with Adobe Premiere, BitCentral Systems, ENPS. Production Control audio (SSL) and studio robotic cameras (Ross Cambots) : Must have at least a high school education; College degree preferred. Minimum of 1 year relevant work experience. Available to work any shifts, including weekends and overnights. Ability to work with others under pressure and meet tight deadlines. Willingness to be trained on additional engineering skills as needed. Valid driver's license Ability to lift at least 50 pounds $39k-72k based off experience.